Water-Soluble Resins 2nd Edition An Industrial Guide

WATER-SOLUBLE RESINS An Industrial Guide Second Edition Ernest W. Flick cl *P NOY ES PUBLICATIONS Park Ridge, New...

Author: Ernest W. Flick

208 downloads 2259 Views 15MB Size Report

This content was uploaded by our users and we assume good faith they have the permission to share this book. If you own the copyright to this book and it is wrongfully on our website, we offer a simple DMCA procedure to remove your content from our site. Start by pressing the button below!
Report copyright / DMCA form

DOWNLOAD PDF

WATER-SOLUBLE RESINS An Industrial

Guide

Second Edition

Ernest W. Flick

cl *P

NOY ES PUBLICATIONS Park

Ridge,

New

Jersey,

USA.

Copyright 01991 by Ernest W. Flick No part of this book may be reproduced any form or by any means, electronic or including photocopying, recording or by tion storage and retrieval system, without in writing from the Publisher. Library of Congress Catalog Card Number: ISBN: O-8155-1274-0 Printed in the United States Published in the United States of America Noyes Publications Mill Road, Park Ridge, New Jersey 07858

or utilized in mechanical, any informapermission 91-8388

by

10987854321

Library Flick,

of Congress Cataloging-in-Publication

Data

Ernest W. Water-soluble resins : an industrial guide / by Ernest W. Flick. p. cm. Includes index. ISBN O-8155-1274-0 1. Gums and resins. 2. Gums and resins, Synthetic. 3. Water -soluble polymers. I. Title. TP978.F58 1991 91-8388 888’.37--dc20 CIP

Preface

The second edition of this popular industrial guide contains descriptions of more than 1100 currently avaiiable water-soluble resins, supplied by 47 manufacturers or distributors of these products. Both natural and synthetic resins are included. The book will be of value to technical and managerial personnel involved in the final products made with these resins, as well as the suppliers of basic raw materials. Types of water-soluble resins included in the book are cellulose ethers; collagens; gelatins; natural gums; and synthetic resins, their dispersions, emulsions, and solutions. The data in the book represent selections from manufacturers’ descriptions made at no cost to, nor influence from, the makers or distributors of these materials. Only the most recent information has been included. It is believed that all of the products listed are currently available, which will be of utmost interest to readers concerned with product discontinuances. The book lists the following own words, for each product:

information,

as available, in the manufacturer’s

(1)

Company name and product category;

(2)

Trade names and product numbers;

(3)

Product description-important

features, properties and applications.

Products are presented by company, and the companies are listed alphabetically. Also included in the book are a Trade Name Index and a Resin Index, for easy and rapid location of products by the reader. In addition, another section, which will be useful, contains Suppliers’ Addresses. It can be found immediately following the Product Information Section. V

vi

Preface

My fullest appreciation is expressed to the companies and organizations which supplied the data included in the book. April, 1991

Ernest W. FI ick

NOTICE To the best of our knowledge the information in this publication is accurate; however, the Publisher does not assume any responsibility for the accuracy or completeness of, or consequences arising from, such information. This industrial guide does not purport to contain detailed user instructions, and by its range and scope could not possibly do so. Mention of trade names or commercial products does not constitute endorsement or recommendation for use by the Publisher. In some cases water-soluble resins could be potentially toxic, and therefore due caution should be exercised. Final determination of the suitability of any information or product for use contemplated by any user, and the manner of that use, is the sole responsibility of the user. We strongly recommend that users seek and adhere to a manufacturer’s or supplier’s current instructions for handling each material they use. The Author and Publisher have used their best efforts to include only the most recent data available. The reader is cautioned to consult the supplier in case of questions regarding current availability.

Contents and Subject Index

PRODUCT INFORMATlON Abatron, Inc. Water-Reducible Epoxy Coatings ABOKOTE, PRIMEKOTE Aceto Corp. CELACOLKOURLOSE Water-Soluble Cellulose Ethers EPOMIN Polyethylene lmines Air Products and Chemicals, Inc. AIRFLEX Ethylene-Vinyl Chloride (EVCL) for Building Products Applications AIRFLEX RP Redispersible Powders AIRVOL Polyvinyl Alcohol Super Hydrolyzed Fully Hydrolyzed Intermediate Hydrolyzed Partially Hydrolyzed Tackified Grades (Typical Properties) UNISIZE Emulsions for Adhesive Products AIRFLEX Vinyl Acetate-Ethylene Emulsions, VINAC Polyvinyl Acetate Homopolymer Emulsions, FL EXCR YL Acrylic Emulsions, FLEXBOND Polyvinyl Acetate Copolymer Emulsions Emulsions for Building Products AIRFLEX Vinyl Acetate-Ethylene Emulsions, AIRFLEX Acrylic Emulsions, AIRFLEX Ethylene- Vinyl Chloride Emulsions, VINAC Polyvinyl Acetate Homopolymer Emulsions, AIRFLEX Vinyl Acetate-Ethylene Powders, FLEXBOND Vinyl Acrylic Emulsion Emulsions-for Paper and Paperboard VINAC Polyvinyl Acetate Emulsions, AIRFLEX Vinyl-Ethylene Emulsions, AIR FLEX Ethylene- Vinyl Chloride Emulsions vii

1 2 2

5 11 12 12 14 18 18 18 19 20 21 22

29

35

viii

Contents and Subject Index VANCRYL Acrylic Resins VANCRYL Styrene-Acrylic Emulsions VANCRYL Vinyl Chloride-Ethylene Resins for Waterborne Inks and Overprint Varnishes VINEX Thermoplastic Polyvinyl Alcohol Copolymer Resins: 2000 Series Alto Chemical Corp ALCOCLEAR ACP ALCOCLEAR CCP-I and CCP-II Water Clarification Polymers AQUATREAT Industrial Water Treatment Products Polyacrylic Acids, Sodium Polyacrylates, Sodium Polymethacrylates, Copolymers Aqualon AQUALON Cellulose Gum: Sodium Carboxymethylcellulose AQUALON CMC-T Sodium Carboxymethylcellulose CULMINAL Methylcellulose/Methylhydroxyethylcellulose/Methylhydroxypropylcellulose/Carboxymethylmethylcellulose KLUCEL Hydroxypropylcellulose NATROSOL Hydroxyethylcellulose NATROSOL PLUS, Grade 330, Modified Hydroxyethylcellulose NATROVIS Hydroxypropyl Hydroxyethylcellulose SUPERCOL Guar Gum Bercen, Inc. BERSET 2647 Crosslinker and Cellulose Reactant BERSET 2100 Crosslinker/lnsolubilizer BERSET 2185 Coating lnsolubilizer BERSET 2586 Crosslinker and lnsolubilizer Callaway Chemical Co. Acrylamide Copolymers-Cationic: Cationic PAM/DMDAAC Type JA YFLOC Acrylamide Polymers: Cationic PAM/DMAEMA Type Acrylamide Polymers: Nonionic and Anionic PAMINAAA Type Polyamines: Aminomethylated Polyacrylamide (Mannich or AMPAM) Type Polyamines: Dimethyl Diallyl Ammonium Chloride (DMDAAC) Type Polyamines: Epichlorohydrin Type (EPI) Polyamines: Melamine-Formaldehyde Products (MF) Cargill, Inc. Water Reducible Resins Epoxy Ester, Alkyds-Oxidizing, Alkyds-Oxidizing ChainStopped, Alkyds-Non-Oxidizing, Silicone Modified, Vinyl Modified, Phenolic Modified, Oil Free Polyesters Cook Paint and Varnish Co. COROC Alkyd Resins COROC B-453-V8 Water Reducible Styrenated Epoxy Resin COROC B-1537-M Water Reducible Acrylic Modified Alkyd COROC R-1782-V8 Water Reducible Polyester

40 43 45 47 48 48 49 50

54 54 57 58 60 63 66 67 68 70 70 71 72 73 74 74 77 86 90 92 95 98 100 100

111 111 112 113 114


COROC S-432-M Water Reducible Alkyd COROC T-1070-M Water Reducible Alkyd Resin COROC XL-l 128-M Water Dispersible Alkyd COROC Z-1722-M Water Dispersible Chain Stopped Alkyd Resin COROC Z-1726-M Water Dispersible Chain Stopped Alkyd COROC Z-1726-Ml Water Dispersible Chain-Stopped Alkyd COROC Z-1727-M Water Dispersible Chain Stopped Alkyd Resin COROC Z-1727-Ml Water Dispersible Chain Stopped Alkyd COROC Z-2055-M Water Reducible Chain Stopped Alkyd Resin CPS Chemical Co., Inc. Polymers: Dimethylamine/Epichlorohydrin Copolymers AGEFLOC Polymers: pDMDACs-Copolymers and Miscellaneous AGEOUAT Polymers: pDMDACs-Paper Industry AGESTAT Polymers: pDMDACs-Water Treatment Polymers: Polymeric Aluminum Salts Polymers: Polymeric Carboxylic Acids AGESPERSE Dock Resins Corp. Acrylic Resins DORESCO, AQUA-HYDE Dow Chemical Co. METHOCEL Cellulose Ethers PRIMACOR Dispersible Polymers DuPont ELVANOL Polyvinyl Alcohol General Purpose, Textile, and Specialty and Adhesive Grades Dynagel, inc. Gelatin Firestone Synthetic Rubber & Latex Co. HARTEX Natural Latex FMC Corp. MARINE COLLOIDS Carrageenan GELCARIN Carrageenan Systems-Water Gelation, SEAGEL Carrageenan Systems-Milk Gelation, VISCARIN Carrageenan Systems-Water Viscosity, SEA KEM Carrageenan Systems-Milk Viscosity, VISCA RIN Carrageenan Systems-Cold Soluble, LACTARIN Carrageenan Systems-Cold Soluble Freeman Chemical Corp. CHEMPOL 10-0091 Water Reducible Alkyd CHEMPOL lo-0095 Water Reducible Alkyd CHEMPOL lo-0097 Water Reducible Alkyd CHEMPOL 19-0503 Water Reducible Polyester CHEMPOL 10-l 105 Water Reducible Alkyd CHEMPOL lo-1210 Water Reducible Alkyd CHEMPOL 10-1300 Water Reducible Copolymer

ix

115 116 117 118 119 120 121 122 123 124 124 126 127 129 131 132 133 133 136 136 139 141 141 144 144 145 145 146 146

152 153 154 155 156 157 158

x

Contents and Subject Index CHEMPOL 1O-l 313 Water Reducible Copolymer CHEMPOL lo-1602 Epoxy Ester Genesee Polymers Corp. GP-165 Silicone Resin Emulsion GP-223 Silicone Resin Emulsion B.F. Goodrich Co. CARBOSET High Performance Polymers for Graphic Arts, Electronics and Coatings Water Dispersion Products, Specialty Products, Dry Products GEON Vinyl Chloride Latexes Resin, Plastic, Internally Plasticized, Vinylidene Chloride GOOD-RITE SB and Vinyl Pyridine Latexes HYCAR Acrylic Latexes Very Soft, Soft, Medium, Firm, Stiff, Hard HYCAR Nitrile Latexes HYSTRETCH Elastomeric Latexes Goodyear Chemicals CHEMIGUM Nitrile Latices GOODYEAR Textile Resin Latex PLIOCORD Vinyl Pyridine Latex PLIOLITE Solution Resins PLIOLITE SBR Rubber Latex PLIOLITE WR-D Water Reducible Thermoplastic Polymer WINGTACK Hydrocarbon Resins WING TACK PLUS, WING TACK EXTRA W.R. Grace 61 Co. DARATAK Adhesive Emulsions Borax Compatible Homopolymers, Non-Borax Compatible Homopolymers, Non-Borox Compatible Copolymers, Special and Blended Systems DAREX Copolymer Latexes 100 Series- Nitriles, 400 Series-Acryla tes EVERFLEX/VERSAFLEX Paint/Coating Emulsions H & C Industries, Inc. ALKOX Polyethylene Oxide Resin Henkel Developmental Water Borne Polyamides GAX G-CRYL Acrylic Resins G-CRY L 250 Acrylic Resin Solution G-CRYL 345 Acrylic Resin Solution G-CRYL 535 Acrylic Resin Solution Hercules, Inc. HERCULES Resin Dispersions FORAL, HERCOL YN, PICCOPALE, PICCOTAC, PICCOVAR, STAYBELITE ESTER PICCONOL Hydrocarbon Resin Emulsions

159 160 161 161 162 163 163 168 172 174 178 181 182 182 183 184 185 188 189 190 192 192

198 199 202 202 203 203 206 210 211 212 213 213

219


PICCOTEX LC55WK Resin Emulsion DRESINOL Resin Dispersions VINSOL Resin Emulsion Hi-Tek Polymers, Inc. CMD W55-5093 Epoxy Resin Dispersion CMD W60-3515 Epoxy Resin Dispersion CMD W66-5520 Epoxy Resin Dispersion CMD WJ55-3540 Epoxy Resin CMD WJ60-6537 Curing Agent CMD 9790 Acrylic Dispersion EPICURE W50-8535 Curing Agent EPI-REZ WJ-3520 Epoxy Resin EPI-REZ WJ-5522 Epoxy Resin EPI-REZ 35201 Epoxy Resin Dispersion EPI-TEX 611-Q Epoxy Ester Emulsion, Epoxy Water-Reducible Resins Hoechst Celanese Corp. TY LOSE Hydroxyethylcellulose TYLOSE Methylhydroxyethylcellulose TYLOSE Sodium Carboxymethylcellulose Hormel Collagens Dried POL YPRO 5000 Liquid PEPTEIN 2000, PROTECTEIN Gelatins FLA VORSET Gelatin, Gummy Type Gelatin Huls America, Inc. HYDROSI L Silanes Amine, Epoxy, Mercapto, Methacrylate, Vinyl, Vinyl-Amino ICI Resins US HALOFLEX Vinyl/Acrylic Terpolymers NEOCRYL Acrylic Emulsions NEOREZ Water-Borne Polyurethane Dispersions NEOTAC Water-Borne Polymers for Adhesives Mobay Corp. BAYBOND Aqueous Polyurethane Dispersions Monsanto Chemical Co. RESIMENE Amino Crosslinker Resins High Solids Meth ylated Melamines (HSMM), Modified HSMM, High Solids Butylated Melamine, High Solids Methylated/ Butylated Melamines, HS Meth ylated Urea Morton International, Inc. LYTRON General Purpose Polystyrene Latices LYTRON Plastic Pigments: Polystyrene MOR-FL0 Concrete Coatings NL Chemicals, Inc.

xi 221 222 226 227 227 228 229 230 231 232 233 234 235 236 237 238 239 239 240 242 244 244 244 244 246 250 250 251 251 254 267 271 274 274 278 278

287 287 288 290 291

xii

Contents and Subject Index Acrylic Polymers AROLON Norland Products Inc. HIPURE Liquid Gelatin Occidental Chemical Corp. High Molecular Weight PVC Suspension Resins OXY OXY 160 Suspension Resin OXY 185 Suspension Resin OXY 190 Suspension Resin OXY 200 Suspension Resin OXY 225 Suspension Resin OXY 225PG Suspension Resin OXY 230 Suspension Resin OXY 240 Suspension Resin OXY 250 Suspension Resin C.J. Osborn Water Reducibles Polyesters, Epoxy Esters, Alkyds, W. R. Acrylics

291

Oxychem PLYOPHEN Resins for Laminating Applications Industrial Laminates, Filament Winding, High Temperature MIL-Spec Laminates VARCUM Abrasive Resins: Grinding Wheel Resins-Liquid VARCUM Resins: Coated Abrasive Resins Polysat Inc. POLYSAT Emulsions POLYSAT (ERC45%) Emulsion Resin Concentrate POLYSAT Hydrocarbon Resin Emulsions POLYSAT SAE Styrene Acrylate Chemical Resistant VOC Emulsion 45% Solids Ranbar Technology inc. G-4510-BC-75 Water Soluble Alkyd Resin G-4510-S-75 Water Soluble Alkyd Resin G-4674-8S75 Water Soluble Alkyd Resin G-4680-BP-75 Water Soluble Alkyd Resin G-4714-P-75 Water Soluble Alkyd Resin Reichhold Chemicals, Inc. AROLON 465-G4-80 Polyester Resin AROLON 557-B-70 Acrylic Resin AROLON 559-G4-70 Acrylic Resin AR0 LON 580-W-42 Alkyd Resin AROLON 585-W-43 Alkyd Resin AROLON 820-W-49 Styrene Acrylic Emulsion AROLON 840-W-39 Acrylic Emulsion AROLON 845-W-45 Styrene Acrylic Emulsion AROLON 850-W-45 Acrylic Copolymer Emulsion AROLON 860-W-45 Acrylic Copolymer Emulsion

308 308

293 293 294 294 296 296 297 297 298 298 299 299 300 301 301

310 311 314 314 315 316 317 318 318 319 320 321 321 322 322 323 324 325 326 327 328 329 330 331


AROLON 970-G4-70 Alkyd AROLON 921-G4-70 Alkyd KE LSO L 3900-BG4-75 Alkyd KE LSO L 3904-864-75 Alkyd KELSOL 3905-B2G-75 Alkyd KELSOL 3906-B2G-75 Alkyd KELSOL 3907-G2B-75 Water Reducible Resin KELSOL 3909-864-75 Water Dispersible Resin KELSOL 3910-826-75 Alkyd KE LSO L 391 B-826-70 Alkyd Resin KELSOL 391 g-826-70 Alkyd Resin KELSOL 3922-G-80 Alkyd Resin KELSOL 3950-826-70 Alkyd Resin KELSOL 3960-826-75 Alkyd Resin KELSOL 3961~62G-75 Alkyd Resin KELSOL 3962-826-70 Alkyd Resin KELSOL 3963-B2G-70 Alkyd Resin KELSOL 3970-G4-75 Alkyd Resin KE LSO L 3980-G4-75 Alkyd Resin KELSOL 3990-826-70 Alkyd Resin SPENSOL L Water Reducible Urethane Resins Aliphatic, Aromatic Sartomer Co. SARTOMER Water Dispersible Monomers StanChem Inc. Polymers and Polymeric Specialties Paints and Building Products Polymers, Paper and Paperboard Coatings, Textiles, Caulks and Sealants, Adhesives and Binders, Thickeners and Additives Thibaut 61 Walker Vinyl Acrylic Copolymer Emulsion PARC0 Water Reducible Resins SUPER ALKYD Alkyds, SUPER POLYESTER Oil Free Polyesters, SUPER THANE Oil Modified Urethanes 100% Acrylic Emulsions PARCRYL TIC Gums, Inc. NUTRILOID Soluble Dietary Fibers Arabic, Guar, Locust Bean, Tragacanth, Agar, Carrageenan, Alginate, Xanthan, Cellulose, NUTRILOID TICALOIDS TIC Guar Gum TICALOSE Cellulose Gum Low Viscosity Grades, Medium Viscosity Grades, High Viscosity Grades, “Resistant “ Grades TICAXAN Xanthan Gum Union Carbide Corp. CELLOSIZE Hydroxyethyl Cellulose HEC

xiii

332 333 334 335 336 337 336 339 340 341 342 343 344 345 346 347 348 349 350 351 352 358 358 362

371 371 373

376 380 380

362 383

365 366 386

xiv

Contents and Subject Index POLYOX Water-Soluble Resins Unocal Chemicals Division Acrylic Carboxylated Styrene Butadiene Polyvinylidene Chloride Styrene Acrylic Vinyl Acetate Homopolymer Vinyl Acrylic R.T. Vanderbilt Co., Inc. RHODIGEL Xanthan Gum RHODOPOL Industrial Grade Xanthan Gum

SUPPLIERS’ TRADE

ADDRESSES

NAME INDEX

RESIN INDEX

389 393 393 401 411 413 414 417 423 423 424 425 429 433

PRODUCT

INFORMATION

2

Water-Soluble

Resins

ABATRON, INC.: Water-Reducible ABOKOTE 8106-l: 2-part white epoxy/water able also in other colors.

Epoxy Coatings:

system. High-gloss

enamel. Avail-

Uses: - Floors, Walls. - Damp surfaces. - Fresh-poured concete. - Painted surfaces. - Safety requirements. Characteristics: Part A: White opaque resin. Part B: Clear hardener. solids: 65.5% (54% by vol.). Lbs/Gallon, Part A: 13.6. ,I 11 B: 8.5 Lbs. by volume. Ratios: l/1 Viscosity: 800-1200 cps. Pot Life- 24 hrs, 40%-R.H. PVC: 18.2%. Thinnins: with tap water. Inducti& Period:-30-45 min. 60 Gloss: 95+ across pot life. +B Gardner Yellowing:-3.4. Chemical Properties: (6 mil wet, 3-3.5 mil dry film, 7-10 clays @ 21C, 40% R.H.): 20% NaOH or 10% HCl: No softenins or blisterincr after 24 hrs 500 cotton swag rubs: Xylene: Slight softening, no gloss loss. MEK: Slightly soft, gloss drop.

Abatron,

ABATRON, INC.: Water-Reducible PRIWEKOTE 8106-2: 2-part red epoxy/water

Inc.

3

Epoxy Coatings(Continued):

system. Metal maintenance

primer.

Uses:

- Metal structures. -

Damp surfaces. Industrial equipment. Painted surfaces. Safety requirements.

Characteristics: Part A: Red opaque resin. Part B: Gray opaque hardener. Solids: 65%. (49% by vol.). Lbs/Gallon, Part A:-14.4 II II B: 10.8 II Ratios: l/l by volume. Viscosity: 1100-1200 cps. Pot Life: 4-6 hrs. PVC: 50.4%. Thinning: with tap water. Induction Period: 20-30 min. Gloss: flat. Chemical Properties: (2-3 mil film, 2 coats on polished steel, cured 3 days @ 21C). 30-Day Water Immersion: No blisters, ~2 pencil hardness drop. Salt Fog: 500 hrs: slight rusting in scribe. 1000 hrs: no blisters

4

Water-Soluble

ABATRON,

Resins

INC.: Water-Reducible

PRIMEKOTE 8106-6: l-part gray epoxy/water in other colors.

Epoxy Coatings(Continued):

system. All purpose primer. Also

Uses: - On fresh-poured concrete. - Damp underground surfaces. - Floors, walls. - Fast recoating cycles. - Safety requirements. Characteristics: Part A: Gray opaque resin. Part B: Gray opaque hardener. Solids: 65% (49% by vol.). Lbs/Gallon, Part A: 14.4. II B: 10.8. I, 11 Ratios: l/1 by volume. Viscosity: 1000-1200 cps. Pot Life- 4-6 hrs. PVC: 50.5% Thinning: with tap water. Induction Period: 30-45 min. Gloss: flat. Chemical Properties: (2-3 mil film, 2 coats on polished

steel, cured 3 days @ 21C).

30-Day Water Immersion: hardness drop. no blisters,. water/hum:idity resistance - Good gasoline resistance - Excellent chemical resistance - Very good solvent resistance - Very good corrosion resistance Alternative Products: AROLON 850 flor adhesion to more plastic substrates; AROLON 860 folr a crosslinked sylstem. Specifications: Percent Solids. Weight: 44-46 Percent Solids; Volume: 43 approx. Viscosity @ 25C. ens (Brookfield LVT, #2 spindle at 60 rpm):- loo-306 Pocnds/Gallcn: 8.6-8.:8 Specific {Gravity, .25C/25C: '1.05 approx. Pounds/Gallon, Solids: 9.4 approx. pH: 8-O-8.5 Applearance: IOpaque White Liquid Volatiles: l,ater, Ammonia Typical Perform,ance Data: White Enamel (2402-24A): Gardner Dry 'Time (3 mil drawdmn): Set: 25 rin. Through cry: 40 min. Dry Hard: 50 min. ZapIon Tack Free (500 Igms): 25 min. Swa rd Hardness: 1 Day: 32 3 Days: 38 7 Days: 40 Minimum Filr-Forming 'Temperature: +63C (measured) Gle.ss Transition Temperature (Tg): +67C (measured) Pencil Hardness (7 da:ys): H Gloss (60/20): 70/35 Implact Resistance (in-lbs) Direct/Reverse: lO/FlO Conical Mandrel: Pass Salt Fog (1CO hrs) B-1000: l/3:2" Q-<Steel: l/,16"

329

330

Water-Soluble Resins

REICHHOLD CHEMICALS, Emulsion:

INC.: AROLON 850-W-45 Acrylic Copolymer

AROLON 850-W-45 is an acrylic copolymer emulsion designed for primer and topcoat use on a variety of engineering grade plastics and metals. It is supplied at a slightly basic pH and contains no organic solvent. Suggested Uses: - Air dry primer and/or topcoat for plastics and metals Performance: - Fast air dry - High gloss - Good water resistance - Excellent adhesion to Noryl, polycarbonate, acrylic, polystyrene and ABS plastics - Excellent adhesion to metal surfaces, including those with oily contamination - Excellent mechanical stability Alternative Products: AROLON 840 for improved gasoline resistance; AROLON 820 for maintenance primers requiring improved corrosion resistance. Specifications: Percent Solids, Weight: 44-46 Percent Solids, Volume: 43 approx. Viscosity @ 25C (Brookfield LVT, Cps, #3 Spindle @ 60RPM): 700-1500 Avoearance: Milkv. White Specific Gravity;'25C/25C: 1.04 approx. Pounds/Gallon, solution: 8.6-8.7 Pounds/Gallon; solids: 9.04 approx. pH: 7.3-8.5 Volatile: Water Typical Performance

Data: Cross-Hatch Adhesion and Metals:

Gardner Dry Time (3 mil drawdown): Set: l/2 hr. Through: l-l/2 hr. Hard: 2-314 hr. Sward Hardness: 1 Day: 24 3 Days: 30 7 Days: 38 Pencil Hardness (at 7 days): B Gloss (60/20): Over Steel: 89161 Over Norvl N-190: 90/58 Adhesion to_Noryl: After 1 day dry: Excellent After 7 days dry: Excellent

to Plastics

Reichhold Chemicals. Inc.

REICHHOLD CHEMICALS, Emulsion:

331

INC.: AROLON 860-W-45 Acrylic Copolymer

AROLON 860-W-45 is an acrylic copolymer emulsion designed for nrimer and topcoat use on a variety of metals and enqineerinq grade plastics. Crosslinking with melamines, polyaziridines or carbodiimides provides improved solvent and chemical resistance. It is compatible with reactive pigments for improved corrosion resistance and contains no organic solvent. Suggested Uses: - Air dry/force dry/baking - Air dry/force dry/baking

primers for plastics and metals. topcoats for plastics and metals.

Performance: Crosslinkable with polyaziridines, carbodiimides, and melamines. Fast air dry. High gloss. Good gasoline resistance. Outstanding chemical, solvent and stain resistance when crosslinked. Excellent adhesion to Noryl, polycarbonate, acrylic, polystyrene, and ABS plastics. Excellent mechanical stability. Alternative Products: AROLON 850 for higher gloss and improved corrosion resistance; AROLON 820 for maintenance primers requiring corrosion resistance. Specifications: Percent Solids, Weight: 44-46 Percent Solids, Volume: 43 approx. Viscosity @ 25C, cps (Brookfield LVT, #3 spindle @ 60 rpm): 1000 max. Appearance: Opaque White Liquid Pounds/Gallon. Solution: 8.7-8.9 Pounds/Gallon, Solids: 9.33 approx. Swecific Gravity. _ 25C/25C: 1.05 approx. pH: ‘8.0-8.5 Volatile: Water, Ammonia Typical Performance Data: White Gloss Ename1(2402-17A), Air-Dried: Gardner Dry Time (3 mil drawdown): Set: 15 min. Through Dry: 30 min. Dry Hard: 45 min. Zapon Tack Free (500 gms): 15 min. Sward Hardness: 1 Day: 36 3 Days: 38 7 Days: 48 Minimum Film-Forming Temperature: 98C

332


REICHHOLD CHEMICALS,

INC.: AROLON 970-G4-70 Alkyd:

Water Dispersible and Bake

Styrenated Alkyd for Air Dry, Force Dry,

AROLON 970 is an economical, water dispersible copolymer resin for fast air dry and force dry industrial primer and shop coat applications. Suggested Uses: Fast dry, low cost industrial primers Colored enamels Spray finishes Low bake or force dry finishes Quick-dry clear varnish Melamine crosslinkable enamels (e.g. drum and strapping enamels) Performance: - Disperses readily in economical ammonia-water and several amine-water combinations - Formulates to meet many air pollution regulations - Resists repeated freeze-thaw cycles in water dispersed form - Mechanically stable for dispersing pigments - Air dries to excellent gloss in enamel-type formulas - Develops excellent early hardness/hot hardness Specifications: Percent Solids, Weight: 69-71 Percent Solids, Volume: 67.7 (approx.) Viscosity at 25C: Stokes: 144-268 Gardner-Holdt: Z6(approx.) Color, Gardner: 0 max. Acid Value, on solids: 65-75 Pounds/Gallon, Solution: 8.7-8.8 Pounds/Gallon, Solids: 9.09 (approx.) Specific Gravity, 25/25C: 1.05 (approx. Solvent: Butoxy Ethanol Film Compatibility (Reduced to 50%, neutralized AROLON AROLON AROLON KELSOL KELSOL

557 580 585 3902 3907

with ammonia) Percent Modifier(solids) 50 10 90 C I I C I C# C C C# C I C# C I I

C = Compatible I = Definite haze or incompatible C#= Slight haze

Reichhold Chemicals, Inc.


INC.: AROLON 921-64-70 Alkyd:

Water Dispersible and Bake

Styrenated Alkyd for Air Dry, Force Dry,

333

AROLON 921 is an economical, water dispersible copolymer alkyd resin for fast air dry, force dry and baking industrial primer and shop coat applications. Suggested Uses: - Fast dry, low cost industrial coatings - White or colored enamels - Low bake or force dry finishes - Drum and strapping enamels - Quick dry clear varnish Performance: - Formulates to meet air pollution regulations - Air dries to excellent gloss in enamel formulations - Develops excellent early hardness in air dry applications - Develops good early water resistance - Crosslinkable with melamine resins - Good hot hardness Alternative Products: AROLON 585 for faster dry-to-handle. KELSOL 3910 for greater flexibility. KELSOL 3919 for improved corrosion resistance, and AROLON 970 for a higher drink resin. Specifications: Percent Solids, Weight: 69-71 Percent Solids, Volume: 65.4 (approx.) Viscosity at 25C: Stokes: 50-100 Gardner-Holdt: 23-25 Color, Gardner: 9 max. Acid Value, on solids: 58-68 Pounds/Gallon, Solution: 8.55-8.65 Pounds/Gallon, Solids: 9.20 (approx.) Specific Gravity, 25/25C: 1.03 (approx.) Solvent: Butoxy Ethanol

334

Water-Soluble

Resins


INC.: KHLSOL 3900-BG4-75 Alkyd:

Water Dispersible Alkyd Resin for Air Dry and Low Bake KELSOL 3900-BG4-75 is a water dispersible chain-stopped alkyd for economical industrial finishes. Additional cosolvent beyond what is supplied in KELSOL 3900-BG4-75 is usually required for optimum solubility and stability in water-based paints. Suggested Uses: - Air dry or force dry topcoats and primers - Low cost primers Performance: - Past dry - Rapid development

of hardness

Alternative Products: KELSOL 3919 for better corrosion resistance. KELSOL 3960 series for best overall performance and stability. Specifications: Percent Solids, Weight: 74-76 Percent Solids, Volume: 68.7 approx. Viscosity @ 25C: Stokes: 130-180 Gardner-Holdt: 26+ Color, Gardner: 8 max. Acid Value, on Solids: 51-57 Pounds/Gallon, Solution: 8.72-8.82 Specific Gravity, 25/25C: 1.05 approx. Pounds/Gallon, Solids: 9.60 approx. Solvent: Butoxy Ethanol/n-Butanol (50/50) rpical Performance Data: White Gloss Ename1(1619-16): Performance Properties(1 mil dry film) Gardner Dry Time, Hours: Set: 1 Through Dry: 3 Dry Hard: 6.5 Zavon Tackfree (500 mss) Sward Hardness:‘ _ l/3/7 days: 14/18/30 Physical Properties: Gloss (60/20): 90/85 Pencil Hardness: HB Reverse/Direct Impact (in-lbs): 10120 Conical Mandrel, l/8": Pass



335

INC.: KELSOL 3904-BG4-75 Alkyd:

Water Dispersible Alkyd Resin for Air Dry and Low Bake KELSOL 3904-BG4-75 is a water dispersible alkyd for economical industrial finishes. Additional cosolvent beyond what is supplied in KELSOL 3904-BG4-75 is usually required for optimum solubility and stability in water-based paints. Suggested Uses: - Air dry or force dry topcoats and primers - Low cost primers Performance: - Good dry rate - Fair corrosion resistance Alternative Products: KELSOL 3918 and 3919 for better corrosion. KELSOL 3960 series for best overall performance and stability. Specifications: Percent Solids, Weight: 74-76 Percent Solids, Volume: 69.4 approx. Viscosity @ 25C: Stokes: 120-170 Gardner-Holdt: 25-26 Color, Gardner: 0 max. Pounds/Gallon, Solution: 8.6-8.7 Specific Gravity, 25/25C: 1.04 approx. Pounds/Gallon, Solids: 9.4 approx. Solvent: Butoxy Ethanol/n-Butanol (50/50) Performance Properties (1 mil dry film): Gardner Dry Time, Hours: Set: 1.0 Through Dry: 2.5 Dry Hard: 7.0 Sward Hardness: l/3/7 Days: 14/24/26 Physical Properties: Gloss (60/20): 90/85 Reverse/Direct Impact (in-lbs): 20/40 Conical Mandrel, l/8": Pass Pencil Hardness: HB Compatibility: KELSOL 3904-BG4-75 is compatible the other KELSOL alkyd resins.

in all ratios with

336



INC.: KELSOL 3905-B2G-75 Alkyd:

Water Dispersible Alkyd Resin For Air Dry and Low Bake RELSOL 3905-B2G-75 is a water dispersible alkyd designed to aive excellent corrosion resistance as well as excellent stability. It must be neutralized prior to the addition of water and usually requires additional cosolvent for best solubility in water-thinned paints. Suggested Uses: - Air dry and low bake industrial enamels and primers - Flowcoat, spray and diptank coatings Performance: - Excellent package stability in paints - High degree of corrosion resistance - Early water resistance Alternative Product: KELSOL 3907 for faster dry. KELSOL 3960 series for best overall performance and stability. Specifications: Percent Solids, Weight: 74-76 Percent Solids, Volume: 69.7 approx. Viscosity @ 25C: Stokes: 80-120 Gardner-Holdt: 25+Color, Gardner: 8 max. Pounds/Gallon, Solution: 8.50-8.60 Pounds/Gallon, Solids: 9.2 approx. Specific Gravity, 25/25C: 1.03 approx. Acid Value, on Solids: 38-42 Solvent, Weight Percent: Butoxy Ethanol/see-Butanol

(50/50)

Typical Performance Data: White Gloss Enamel (1697-25): Gardner Dry Time, Hours: Set: l/2 Through Dry: 4 Dry Hard: 6 Sward Hardness: l/3/7 Days: 14128138 Physical Properties: Gloss (60/20): 90/86 Reverse/Direct Impact (in-lbs): 5/20 Conical Mandrel, l/8": Pass Pencil Hardness: HB-F Salt Spray, CRS, 100 hrs: l/16" creepage


REICHHOLD CHEMICALS, Water Dispersible

337

INC.: KELSOL 3906-B2G-75 Alkyd: Alkyd Resin for Air Dry and Low Bake

KELSOL 3906-B2G-75 is a water dispersible alkyd designed to give excellent corrosion resistance as well as early water spot resistance. It must be neutralized prior to the addition of water and usually requires additional cosolvent for best solubility and stability in water-thinned paints. Suggested Uses: - Air Dry or force dry primers and topcoats - Spray, dip, and flowcoat applications Performance: - Excellent corrosion resistance - Good air dry rate - Very good humidity and water resistance Alternative Products: KELSOL 3961 for faster dry, KELSOL 3918 and 3919 for lower cost. Specifications: Percent Solids, Weight: 74-76 Percent Solids, Volume: 69.4 approx. Viscosity @ 25C: Stokes: 130-180 Gardner-Holdt: 26+ Color, Gardner: 8 max. Pounds/Gallon, Solution: 8.60-8.70 Pounds/Gallon, Solids: 9.3 approx. Specific Gravity, 25/25C: 1.03 approx. Acid Value, on Solids: 39-43 Solvent, Weight Percent: Butoxy Ethanol/set-Butanol

(SO/SO)

Typical Performance Data: White Gloss Ename1(1697-26): Performance Properties (1 mil dry film): Gardner Dry Time, Hours: Set: l/2 Through Dry: 2 Dry Hard: 4 Zapon Tackfree Time (hrs): 500 gms (drawdown): 3 500 gms (sprayout): 3/4 Sward Hardness: _ 1 Day: 20 3 Days: 24 7 Days: 30 Physical Properties: Gloss (60/20): 92/85 Reverse Impact, in-lbs: 10 Compatibility: KELSOL 3906-B2G-75 is compatible in all ratios with the other KELSOL alkyd resins.

338


REICHHOLD CHEMICALS, Resin:

INC.: KELSOL 3907-G2B-75 Water Reducible

Water Reducible Resin For Air Dry and Low Bake KELSOL 3907-G2B-75 is a fast drying water dispersible alkyd designed to give early hardness and good humidity resistance. Additional cosolvent is required for the best solubility and stability in paint formulations. Normal butanol or a blend of n-butanol and butoxy ethanol is required for optimum stability and film performance. Suggested Uses: - Fast drying primers and enamels. - Spray, dip or flowcoat applications. Performance: - Very fast dry. - Excellent stability. - Excellent humidity resistance. - Very g00a corrosion resistance. - Passes hypoid gear lubricant test (100 hrs. @

225F).

Alternative Products: KELSOL 3961 for fast dry at a low cost. Soecifications: Percent solids, Weight: 74-76 Percent solids, Volume: 69.5 (approx.) Viscosity @ 25C: Stokes: 160-210 Gardner-Holdt: Z5+-Z6+ Acid Value. on solids: 39-43 Color, Gardner: 8 max. Soecific Gravity, 25C/25C: 1.02-1.04 Pounds/Gallon; Solution: 8.56 (approx.) Pounds/Gallon, Solids: 9.30 (approx.) Solvent: Propoxy Propanol/Sec-Butanol (50/50) Compatibility: KELSOL 3907-G2B-75 is compatible with all the other air dry alkyds. AROLONS 840 and 850 can be blended in at the 25% level (based on resin solids). Melamines should be used at the lo-20% level.


REICHHOLD CHEMICALS, Resin:

339

INC.: KELSOL 3909-BG4-75 Water Dispersible

Water Dispersible Resin for Air Dry and Low Bake KELSOL 3909-BG4-75 is a water dispersible alkyd resin similar to KELSOL 3902 but specifically designed for improved corrosion resistance, particularly in thin films. It is lower in viscosity than KELSOL 3902 but, in general, can be substituted at equal weights in the KELSOL 3902 formulations. KELSOL 3909 requires some additional cosolvent beyond what is in the vehicle for the best stability and solubility in paints. Suggested Uses: - Air dry or force dry primers and top coats for spray, dip or flowcoat applications - Metal finishing applications where film thickness is only expected to be in the 0.2 to 0.7 mil range Performance: - Outstanding corrosion resistance, particularly in thin films - Excellent humidity resistance - Very good exterior durability and early water spot resistance Alternative Products: KELSOL 3961 for faster dry, KELSOL 3910 for lower cost, KELSOL 3906 for equivalent corrosion resistance with faster dry, KELSOL 3907 for very good corrosion resistance with the fastest dry. Specifications: Percent Solids, Weight: 74-76 Percent Solids, Volume: 69.4 (approx.) Viscosity @ 25C: Stokes: 90-120 Gardner-Holdt: 25 approx. Color, Gardner: 8 max. Specific Gravity, 25C/25C: 1.02-l -04 Pounds/Gallon, Solution: 8.56 approx. Pounds/Gallon, Solids: 9.30 approx. Acid Value, on solids: 34-38 Solvent: Butoxy Ethanol/n-Butanol (50/50) Typical Performance Data: White Gloss Ename1(1788-36): Dry Times, 1 Mil Dry Film (Drawdown): Set: 45 minutes Thru Dry: 5 l/2 hours Sward-Hardness: One Day: 16 Three Days: 30 Physical Properties: Direct Impact: 120 inch lbs. Reverse Impact: 120 inch lbs.

340



INC.: KELSOL 3910-B2G-75 Alkyd:

Water Dispersible Resin For Air Dry and Low Bake KELSOL 3910-B2G-75 is a water dispersible short oil alkyd designed for economical industrial finishes. Additional cosolvent beyond what is supplied in KELSOL 3910-B2G-75 is usually required for optimum solubility and stability in water-based paints. Manganese driers are incompatible with this resin. Suggested Uses: - Air dry or force dry topcoats and primers - Used for spray, dip, and flowcoat applications - LOW cost shopcoat primers - High hydroxyl value for melamine cross linking Performance: - Good corrosion resistance - Excellent stability - Good humidity resistance - Very flexible in air dried and crosslinked

coatings

Alternative Products: KELSOL 3918 and KELSOL 3919 for broader pigment and drier compatibility. Specifications: Percent Solids, Weight: 74-76 Percent Solids, Volume: 70 approx. Viscosity @ 25C: Stokes: 120-200 Gardner-Holdt: 25+-26+ Color, Gardner: 7 max. Pounds/Gallon, Solution: 8.55-8.65 Pounds/Gallon, Solids: 9.23 approx. Specific Gravity, 25/25C: 1.04 approx. Acid Value, on Solids: 39-43 Solvent: 2-Butoxy Ethanol/set-Butanol(64/36) Typical Performance Data: (Based on White Gloss Enamel 2134-3) Drying Time (3 mil wet film--drawdown): Set: 30 minutes Through Dry: 2 hours Hard Dry: 5 hours Zapon Tack-free Time (500 gram): 3 hours Sward Hardness (1 mil dry film): One Day: 22 Three Davs: 28 Physical Properties (1 mil dry film): Gloss (60/20): 90/84 Reverse Impact, in-lbs.: 120 Direct Impact, in-lbs.: 160 Conical Mandrel, l/8": Passed

Reichhold


Chemicals,

Inc.

INC.: KELSOL 3918-B2G-70 Alkyd Resin: Alkyd Resin For Air Dry and Low Bake

KELSOL 3918-B2G-70 is a water-dispersible short oil alkyd designed to give fast dry with good early water resistance. Corrosion resistance is moderate. This resin must be neutralized prior to the addition of water and usually requires additional cosolvent for best solubility and stability in water-thinned paints. Suggested Uses: - Fast air dry or force dry primers and topcoats - Spray, dip and flowcoat applications Performance: - Fast air dry rate - Excellent humidity and early water resistance - Moderate corrosion reSiStaIm? Higher solids paints Soecifications: mL Percent Solids, Weight: 69-71 Percent Solids, Volume: 64.6 (approx.) Viscosity @ 25C: Stokes: 90-130 Gardner-Holdt: Z5+ (approx.) Color, Gardner: 8 max. Pounds/Gallon, Solution: 8.48-8.58 Pounds/Gallon, Solids: 9.1 (approx.) Specific Gravity, 25C/25C: 1.023 (approx.) Acid Value, on solids: 37-41 Solvent, Weight Percent: Butoxy Ethanolfsec-Butanol

SO/50

Typical Performance Data: White Gloss Enamel (2383-13): Gardner Dry Time (hrs.): Set: 0.5 Through Dry: 1.0 Dry Hard: 2.5 Zapon Tackfree (hrs.)--Drawdown: 200 gm: 2.5 500 gm: 3.5 Sward Hardness: (l/3/7 Days): 22/30/34 Reverse/Direct Impact (in-lb): FlO/lO Conical Mandrel, i/8": Pass 4-Hour Water Spot (24 hr. air dry): OK Gloss (60/20): 90178 Corrosion Resistance (100 hrs., CRS, creepage): 2/16" QUV (60/20): Initial: 87/77 Humidity Resistance (60/20): Initial: 88/77 Cleveland Humidity Resistance (60/20): Initial: 89/78

34 1

342



INC.: KELSOL 3919-B2G-70

Alkyd Resin:

Alkyd Resin For Air Dry and Low Bake

KELSOL 3919-B2G-70 is a water-dispersible, chain-stopped alkyd designed to give fast dry coupled with excellent corrosion resistance. It must be neutralized prior to the addition of water and usually requires additional cosolvent for best solubility and stability in water-thinned paints. Suggested Uses: - Fast air dry or force dry primers and topcoats - Spray, dip and flowcoat applications Performance: - Excellent corrosion resistance - Fast air dry rate - Excellent humidity and water soak resistance Specifications: Percent Solids, Weight: 69-71 Percent Solids, Volume: 64 (approx.) Viscosity @ 25C: Stokes: 90-130 Gardner-Holdt: 25+ (aoorox.) __ Color, Gardner: t3max. Pounds/Gallon, Solution: 8.6-8.7 Pounds/Gallon; Solids: 9.3 (approx.) Specific Gravity, 25C/25C: 1.04 (approx.) Acid Value, on solids: 33-37 Solvent, Weight Percent: Butoxy Ethanol/set-Butanol

(SO/SO)

Typical Performance Data: High Gloss White Enamel (2383-66): Gardner Dry Time (hrs.): Set: 1.0 Through Dry: 2.0 Dry Hard: 3.5 Zapon Tackfree (hrs.)-Drawdown: 200 gm: 2.0 500 gm: 3.5 Sward Hardness (l/3/7 Days): 28/30/32 Reverse/Direct Impact (in-lb): FlO/lO Conical Mandrel, l/8": Pass 4-Hour Water Spot (24 hr. air dry): V. Sl. Haze Gloss (60/20): 89/80 Corrosion Resistance (100 hrs., CRS, creepage): l/32" QUV (60/20): Initial: 92/82 Humidity Resistance (60/20): Initial: 91/80 Cleveland Humiditv Resistance (60/20): Initial: 89/75Water Soak (60/20): Initial: 90/80


REICHHOLD

CHEMICALS,

343

INC.: KELSOL 3922-G-80 Alkyd Resin:

Water Dispersible Resin For Architectural Coatings

and Maintenance

KELSOL 3922-G-80 is a water dispersible alkyd designed for the stringent stability requirements of consumer shelf goods. It is a higher solids improved version of KELSOL 3920 developed for minimum viscosity drift while maintaining dry and homogeneity after 60-90 days at 120F. Suggested Uses: - Architectural gloss and semi-gloss brushing enamels - Exterior trim and trellis enamels - Industrial maintenance primer--topcoat systems - Modifier for SPENSOL F74 varnishes and enamels - Water dispersed wood stains Performance: Develops excellent 60 and 20 gloss Brushes or rolls easily with outstanding flow Develops early water spot resistance Dries to tough non-thermoplastic films Maintains gloss in accelerated and prototype exterior exposure on a par with the more durable alkyds May be formulated to meet VOC regulations Exhibits better performance over poorly prepared surfaces than latex systems Provides good salt fog resistance when properly formulated into rust inhibitive multicoat systems Specifications: Percent Solids, Weight: 79-81 Percent Solids, Volume: 78.2 approx. Viscosity @ 25C: Stokes: 90-130 Gardner-Holdt: 25 approx. Color, Gardner: 8 max. Specific Gravity, 25/25C: 1.03-1.05 Pounds/Gallon, Solution: 8.64 approx. Pounds/Gallon, Solids: 8.90 approx. Acid Value, on solids: 52-58 Solvent: Propoxy Propanol/Diethylene Glycol n-Butyl Ether

344




Alkyd Resin:

Water Dispersible Phenolic Modified Resin for LiftResistant Air Dry and Baking Primers KELSOL 3950-B2G-70 is a water-dispersible phenolicmodified alkyd designed to be used in lift-resistant primers, under topcoats such as nitrocellulose lacquer, alkyds, twocomponent urethanes, etc., which contain strong solvents. Suggested Uses: - Lift-resistant primer vehicle for lacquers and enamels. - Air-dry or baking primers. - Colored topcoats. Performance: - Exhibits excellent adhesion. - Fast air dry. - Imparts good bake properties. - Resists lifting by strong solvents. Tentative Specifications: Percent Solids, Weight: 69-71 Percent Solids, Volume: 65 approx. Viscosity at 25C: Stokes: 45-70 Gardner-Holdt: 23 (approx.) Color, Gardner: 9 max. Pounds/Gallon, solution: 8.43-8.53 Pounds/Gallon, solids: 9.1 (approx.) Specific Gravity, 25C/25C: 1.02 (approx.) Acid Value, on solids: 39-43 Solvent: Butoxy Ethanol/see-Butanol(70/30) Typical Performance Data: Performance Properties (Primer Formula-2419-391) (1 mil dry film) Drying Time, Hours--Drawdown: Set: l/2 Through Dry: l-1/2 Dry Hard: 2 Zapon Tackfree Time (Mins.)--Drawdown: 200 gm: 20 Sward Hardness: One Day: 16 Physical Properties: Gloss: Flat Reverse Impact, in-lbs.: 10 Direct Impact, in-lbs.: 20 Resistance Properties: Salt Spray, 250 hrs, CRS: l/16" creep Lift Resistance @ 1,2,16,24,72 and 96 hours: Excellent Humidity (BlOOO), 500 hrs: No blisters Hydrocarbon Resistance (4 hrs.): Excellent Water Immersion (72 hrs.): Excellent


REICHHOLD

CHEMICALS,

INC.:

KELSOL

3960-B2G-75

Alkyd Resin:

Water Reducible Resin for Air Dry and Low Bake KELSOL 3960-B2G-75 is a water dispersible chain-stopped alkvd desianed to aive a combination of excellent corrosion, humidity and water-resistance. Additional cosolvent beyond what is supplied in KELSOL 3960 is usually required for the best solubiiity and stability. Suggested Uses: - Topcoats and primers for air dry, force dry or bake. - Spray, dip or flowcoat applications. - Blending resin for use with acrylic emulsions. Performance: - Excellent corrosion and humidity resistance. - Excellent early water and water soak resistance. - Excellent exterior durability. Alternative Products: KELSOL 3963 for faster dry. Specifications: Percent Solids, Weight: 74-76 Percent Solids, Volume: 69.4 (approx.) Viscositv B 25C: Stokes:.120-180 Gardner-Holdt: 25+ - Z6+ Color, Gardner: 8 max. Specific Gravity, 25C/25C: 1.03-1.05 Pounds/Gallon, Solution: 8.70 (approx.) Pounds/Gallon, Solids: 9.41 (approx.) Solvent: Butoxy Ethanol/set-Butanol (50/50) Typical Performance Data: Performance Properties (1 mil dry film): White Gloss Enamel (2343-23): Drying Time, hours: Set: 1 Through Dry: 3 Dry Hard: 6 Sward Hardness: One Day: 16 Physical Properties: Gloss (60/20): 92/84 Reverse impact, in.-lbs.: FlO Direct Impact, in.-lbs.: 10 Conical Mandrel, l/8 inch: Pass Pencil Hardness - 7 days: HB Resistance Properties: _ 4 hrs. AD - 4 hrs. H20 spot: Pass 1000 hours water soak: Pass Corrosion Resistance: Ext. Humidity Resistance (500 hrs.): Ext.

345

346

Water-Soluble

Resins



Alkyd Resin:

Water Dispersible Resin for Air Dry and Low Bake KELSOL 3961-B2G-75 is a water-dispersible chain-stopped designed to give excellent corrosion resistance in addition to very fast dry rate. It must be neutralized prior to the addition of water and usually requires additional cosolvent for best solubility and stability in water thinned paints. alkyd

Suggested Uses: - Fast air dry or force dry topcoats and primers - Spray, dip and flowcoat applications - Bake systems using melamine resins Performance: - Excellent corrosion resistance - Very fast dry rate - High hydroxyl value for better crosslinking Alternative Products: KELSOL 3960 for best durability in a chain-stopped alkyd with slower dry rate, KELSOL 3907 or KELSOL 3963 for superior humidity reeistance with fast dry. Specifications: Percent Solids, Weight: 74-76 Percent Solids, Volume: 69 approx. Viscosity @ 25C: Stokes: 130-180 Gardner-Holdt: 25+ - 26+ approx. Color. Gardner: 8 max. Pounds/Gallon, Solution: 8.75-8.85 Svecific Gravity, 25Cf25C: 1.06 approx. Pounds/Gallon, Solids: 9.53 approx; Acid Value, on solids: 35-39 Solvent: Butoxy Ethanol/set-Butanol (50/50) Typical Performance Data: Performance Properties (1 mil dry film): White Gloss Enamel: (2103-2): Drying Time, Hours: Set: 0.5 Through Dry: 1.5 Dry Hard: 3.0 Sward Hardness: One Day: 20 Three Days: 24 Seven Days: 34 Physical Properties: -Gloss (60720): 90/84 Reverse Impact, in.-lbs.: FlO Direct Impact, in.-lbs.: 10 Conical Mandrel, l/8": Fail Pencil Hardness @ 7 days: HB-F




347

Alkyd Resin:

Water Dispersible Alkyd Resin KELSOL 3962-B26-70 is a water dispersible chain-stopped alkyd at 70% nonvolatile in an equal blend of butoxy ethanol/sec-butanol. It must be neutralized prior to the addition of water and requires addition of cosolvent for best solubility and paint stability. Suggested Uses: - Air-dry and low bake industrial enamels and primers - Flow coat, spray and dip-tank coatings - Crosslinkable with melamine resins Performance: - Excellent package stability in paints - Hish decree of corrosion resistance - Excellent early adhesion in the first hour - High hydroxyl value for better crosslinking - Excellent hot hardness Alternative Products: KELSOL 3960 for better water and humidity KELSOLS 3907 and 3961 for faster dry rate.

resistance,

Specifications: Percent Solids, Weight: 69-71 Percent Solids, Volume: 65 approx. Viscosity @ 25C: Stokes: 90-130 Gardner-Holdt: 25+ Color, Gardner: 8 max. Pounds/Gallon, solution: 8.59-8.69 Pounds/Gallon, solids: 9.29 approx. Specific Gravity, 25/25C: 1.04 approx. Acid Value, on solids: 33-37 Solvent: Butoxy Ethanol/see-Butanol (SO/SO) Typical Performance Data: Performance Properties (1 mil dry film): White Gloss Enamel (2440-3): Drying Time, Hours: Set: 0.5 Through Dry: 1.5 Dry Hard: 3.0 Sward Hardness: 1 Day: 18 Physical Properties: Gloss (60/20): 93/80 Reverse Impact, in.-lbs.: FlO Direct Impact, in.-lbs.: 10 Conical Mandrel, l/8": Fail Pencil Hardness @ 7 days: HB Salt Spray, 100 days, CRS: l/32"

348



INC.: KELSOL 3963-B2G-70 Alkyd Resin: Alkyd Resin for Air Dry and Low Bake

KELSOL 3963-B2G-70 is a water-dispersible chain-stopped alkyd designed to give excellent corrosion resistance as well as early water spot resistance. It must be neutralized prior to the addition of water and usually requires additional cosolvent for best solubility and stability in water-thinned paints. Suggested Uses: - Fast air dry or force dry primers and topcoats - Spray, dip and flowcoat applications Performance: - Excellent corrosion resistance - Very fast air dry rate - Excellent humidity and water resistance Alternative Products: KELSOL 3960 for better water soak resistance, for faster dry. Specifications: Percent Solids, Weight: 69-71 Percent Solids, Volume: 64 approx. Viscosity @ 25C: Stokes: 90-130 Gardner-Holdt: 25 - 26 approx. Color-Gardner: 0 max. Pounds/Gallon, Solution: 8.50-8.60 Specific Gravity, 25/25C: 1.03 approx. Pounds/Gallon, Solids: 9.3 approx. Acid Value, on solids: 33-37 (SO/SO) Solvent: Butoxy Ethanol/set-Butanol Typical Performance Data: Performance Properties (1 mil dry film): Gardner Dry Time, Hrs: Set: 1 Through Dry: l-1/2 Dry Hard: 2-l/2 Zapon Tack-free Time: Drawdown (1 dry mil): 2:20 Sward Hardness: One Day: 22 Physical Properties: Gloss (60/20): 92/81 Reverse Impact, in-lbs.: FlO Direct Impact, in-lbs: 10 Conical Mandrel. l/8": Pass Pencil Hardness.@ 7 days: HB Salt Spray, 100 hrs, CRS: l/16" 4-Hour Water Spot (24 hr air dry): OK

KELSOL 3961



349

INC.: KELSOL 3970-G4-75 Alkyd Resin: Silicone Modified Alkyd

KELSOL 3970-G4-75 is a water dispersible, silicone-modified alkyd resin intended for use in air dry and baking maintenance and industrial finishes where outstanding gloss and color retention are required. Laboratory tests indicate that paints made with KELSOL 3970 have the same outstandins exterior durability as those made with conventional, solvent thinned siliconemodifed alkyds. KELSOL 3970 is supplied at 75% solids in butoxy ethanol. Additional cosolvent may-be added to modify reductioncharacteristics. Addition of a volatile amine or ammonia is required before dilution with water. Suggested Uses: - Air dry enamels for outstanding gloss and color retention - Transportation and implement finishes - Exterior siding and signs - Exterior maintanence coatings - Moderately high temperature resistant coatings Alternative Products: KELSOL 3960 is a lower cost, non-silicone dispersible alkyd.

containing water

Specifications: Percent Solids, Weight: 74-76 Percent Solids, Volume: 70.5 approx. Typical Performance Data: KELSOL 3970 White Enamel (2025-24-l): Dry Time, hours: Set: 1.0 Through Dry: 2.75 Dry Hard: 7.5 Sward Hardness: 1 Day: 16 3 Days: 20 7 Days: 30 Direct/Reverse Impact (in-lbs): 40/20 l/8" Conical Mandrel: Pass Pencil Hardness: HB-B Gloss Readings (60/20): 93/92 4 Hours Water Spot (blistering): Sliqht Weatherometer (60/20): Initial: 92/92 1000 Hrs: 83/52 OUV /60/20): Initial; 96/99 Clear Stabilitv (30% in water): 9 davs at 160F Florida Exposuge, 45 South: Initial: 91/83 3 months, UW: 73153 6 months, W: 85/63

350



INC.: KELSOL 3980-G4-75 Alkyd Resin:

Water Dispersible Finishes

Coconut Baking Alkyd for Industrial

KELSOL 3980-G4-75 is a water dispersible coconut oil alkyd resin designed for use in melamine crosslinked finishes. It is supplied at 75% solids in 2-butoxy ethanol. Suggested Uses: - White finishes for light fixtures and other light colored appliances - Durable light colored baking clears - Baking enamels for metal hardware and equipment Performance: - Exhibits excellent color and gloss retention - Provides very good chemical, stain and water resistance - Produces enamels with outstanding application properties - Cure to hard mar resistant films Alternative Products: AROLON 559-G4-70 W.D. acrylic resin and KELSOL 5293-B-75 W.D. oil free polyester. Tentative Specifications: Percent Solids, Weight: 74-76 Percent Solids, Volume: 70 approx. Viscosity @ 25C: Stokes: 120-180 Gardner-Holdt: Z6+ approx. Color, Gardner: 5 max Pounds/Gallon, Solution: 8.93-9.03 Specific Gravity, 25/25C: 1.08 approx. Pounds/Gallon, Solids: 9.60 approx. Acid Value, on solids: 52-58 Solvent: 2-Butoxy Ethanol Typical Performance Data: (Data Obtained on 2166-12~ Revised Formulation) (Resistance Properties: 2 hours exposure) 10% NaOH 10% H2S04 10% Acetic Acid Gasoline Iodine Ketchup Coffee Film Performance: Gloss

(60/20):

Pass Pass Pass Pass Pass Pass Pass

Shoe Polish Merthiolate Oil Lipstick Pepsi Mustard

Baking Schedule 93/80-

Pencil Hardness: F Impact, D/R: 100/60 MEK Rubs: lOO+

Fail Pass Pass Pass Pass Slight Stain

(min./F): 10/275:



351

INC.: KELSOL 3990-B2G-70 Alkyd Resin:

Water Dispersible Acrylic Modified Alkyd KELSOL 3990-B2G-70 is a fast drying water dispersible acrvlic-modified alkyd designed to gave early hardness, excellent durability; and good adhesion to plastics. Additional cosolvent is required for the best solubility and stability in paint formulations. Suggested Uses: - Fast-drying primers and topcoats for metals and plastics - Spray, dip, or flowcoat applications Performance: - Very fast dry - Excellent durability - Excellent adhesion to plastics - Good corrosion resistance Alternative Products: KELSOL 3907 and 3961 for fast dry and good durability. AROLON 850 for excellent adhesion to engineering plastics. Tentative Specifications: Percent Solids, Weight: 69-71 Percent Solids, Volume: 66 approx. Viscosity at 25C: Stokes: 60-120 Gardner-Holdt: 24-25 Acid Value, on Solids: 38-42 Gardner Color: 5 max. Specific Gravity, 25/25C: Pounds/Gallon, Solution: 8.40-8.50 Pounds/Gallon, Solids: 9.0 approx. Solvent: Butoxy Ethanol/set-Butanol (SO/SO) Typical Performance Data: Performance Propertes (White Enamel 2470-59, 1 mil dry film): Drying Time, Hours (Drawdown): Set: 0.5 Thru Dry: 1.5 Dry Hard: 2.5 Sward-Hardness: l/3/7 Days: 30/30/32 Phvsical Prowerties: -Gloss (6Oj20): 91/82 Reverse Impact (in-lbs): F10 Direct Impact (in-lbs): 10 Conical Mandrel, l/8": Pass Pencil Hardness @ 7 Days: F Salt Spray, 100 Hrs, CRS: l/16" Rust Creep Adhesion to Plastics: Noryl Excellent Plexiglass Excellent Polycarbonate Excellent a) V052 Excellent

352


REICHHOLD CHEMICALS, Resins:

INC.: SPENSOL L Water Reducible Urethane

The SPENSOL L resins are a series of anionic colloidal dispersions of thermoplastic urethane polymers that air dry to form tough, elastomeric, high tensile strength films exhibiting a wide range of flexibility and hardness characteristics. Features: Fast dry-to-handle properties Extraordinary flexibility and impact resistance Outstanding toughness and abrasion resistance Excellent adhesion to heat and solvent sensitive substrates Suitable color for white and light pastel shades Stable to repeated freeze/thaw cycles Fully reacted polyurethane elastomer with no free isocyanate Low solvent content Hydrolytically stable Non-flammable solution Water clean-up Compatible with acrylic emulsions Suggested Uses: - Air dry primers or color coats for interior plastic, rubber, wood, or metal substrates - Coatings for flexible substrates (textiles & leather) - Low bake crosslinked exterior coatings - Spray, dip, brush & flow applied systems - Trade sales sealers, stains & clear finishes for interior wood substrates - Concrete sealers - Flexographic and gravure ink and overprint varnish modifier Applications are found in transportation, textile, building products, sporting goods, graphics and trade sales areas.

Reichhold Chemicals, inc.

REICHHOLD CHEMICALS, INC.: SPENSOL L Water Reducible Resins(Continued): Typical Resin Analysis: Aliphatic: SPENSOL: L51: Percent Solids, Weight: 30 Viscosity @ 25C Stokes: 1.0 Color, Gardner: 2 Specific Gravity 25C/25C: 1.05 Lbs./Gal., Solution: 8.73 Lbs./Gal., Solids: 9.87 pH: 8.5 Solvents: Water/N-Methyl-2-pyrrolidone: L52: Percent Solids, Weight: 30 Viscositv P 25C Stokes: 0.5 Color, Gardner: 3 Specific Gravity 25C/25C: 1.05 L&./Gal., Solution: 8.75 Lbs./Gal., Solids: 10.03 pH: 8.0 Solvents: Water/N-methyl-2-pyrrolidone: L53: Percent Solids, Weight: 30 Viscosity @ 25C Stokes: 0.5 Color, Gardner: 3 Specific Gravity 25C/25C: 1.05 Lbs./Gal., Solution: 8.70 Lbs./Gal., Solids: 9.77 pH: 8.0 Solvents: Water/N-methyl-2-pyrrolidone: L53-40: Percent Solids, Weight: 40 Viscosity @ 25C Stokes: 4 Color, Gardner: 3 Specific Gravity 25C/25C: 1.06 Lbs./Gal., Solution: 8.80 Lbs./Gal., Solids: 9.74 pH: 8.0 Solvents: Water/N-methyl-2-pyrrolidone: L54: Percent Solids, Weight: 32 Viscosity @ 25C Stokes: 20 Color, Gardner: 4 Specific Gravitv 25C/25C: 1.05 Lbs./Gal., Solution:.8.75 Lbs./Gal., Solids: 10.03 pH: 8.5 Solvents: Water/N-methyl-2-pyrrolidone:

76124

80/20

80/20

83117

75125

Urethane

353

354


REICHHOLD CHEMICALS, INC.: SPENSOL L Water Reducible Urethane Resins(Continued): Typical Resin Analysis

(Continued):

Aliphatic(Continued) SPENSOL: -L55: Percent Solids, Weight: 35 Viscosity @ 25C Stokes: 2.0 Color, Gardner: 2 Specific Gravity 25C/25C: 1.02 Lbs./Gal., Solution: 8.50 Lbs./Gal., Solids: 9.01 pH: 7.5 Solvents: Water/N-methyl-2-pyrrolidone:

80/20

L56: Percent Solids, Weight: 38 Viscosity @ 25C: 20 Color, Gardner: 3 Specific Gravity 25C/25C: 1.01 Lbs./Gal., Solution: 8.80 Lbs./Gal.. Solids: 9.60 pH: 8.0 . Solvents: Water/N-methyl-2-pyrrolidone:

76/24

Aromatic: L41: Percent Solids, Weight: 32 Viscositv a 25C Stokes: 5 Color, Gardner: 3 Specific Gravity 25C/25C: 1.06 L&./Gal., Solution: 8.85 Lbs./Gal., Solids: 10.17 pH: 9.0 Solvents: Water/N-methyl-2-pyrrolidone:

73/27

L-44: Percent Solids, Weight: 32 Viscositv @ 25C: 3 Color, Gardner: Hazy Specific Gravity 25C/25C: 1.05 Lbs./Gal., Solution: 8.75 Lbs./Gal., Solids: 9.83 pH: 8.0 Solvents: Water/N-methyl-2-pyrrolidone:

85/15

Reichhold Chemicals, inc.

355

REICHHOLD CHEMICALS, INC.: SPENSOL L Water Reducible Urethane Resins(Continued): Typical Clear Film Properties: Aliphatic: L51: Dry Time: Set, minutes (3 mils wet film): 45 Dry Hard: minutes: 210 Sward Hardness @ 24 Hours/72 hours: 52/56 Film Properties: Tensile Strength-psi: 5000 Elongation-Percent: 150 100% Modulus-psi: 4000 Tear Strength, Split-pli: 75 Hardness-Shore D: 60 Taber Abrasion Resistance (mg. loss): 31 Key Characteristics: Hardness, Flexibility, Abrasion Res. L52: Dry Time: Set, minutes (3 mils wet film): 75 Dry Hard: minutes: 270 Sward Hardness @ 24 hours.172 hours: 18/20 Film Properties: Tensile Strength-psi: 7000 Elonuation-Percent: 360 lOO%-Modulus-psi: 1500 Tear Strength, Split-pli: 300 Hardness-Shore D: 35 Taber Abrasion Resistance (mg. loss): 14 Key Characteristics: Flexibility, Low Temp., Impact, Weather L53: Dry Time: Set, minutes (3 mils wet film): 100 Dry Hard: minutes: 330 Sward Hardness @ 24 hours/72 hours: 12/14 Film Properties: Tensile Strength-psi: 5600 Elongation-Percent: 410 100% Modulus-psi: 1100 Tear Strength, Split-pli: 390 Hardness-Shore D: 40 Taber Abrasion Resistance (mg. loss): 11 Key Characteristics: Flexibility, Adhesion, Abrasion Res.

356


REICHHOLD CHEMICALS, INC.: SPENSOL L Water Reducible Resins(Continued):

Urethane

Typical Clear Film Properties(Continued): Aliphatic: SPENSOL: _IL53-40: Dry Time: Set, minutes (3 mils wet film): 25 Dry Hard: minutes: 110 Sward Hardness @ 24 hours.172 hours: 12/16 Film Properties: Tensile Strength-psi: 5800 Eloncation-Percent: 400 lOO%-Modulus-psi: 1000 Tear Strength, Split-pli: 320 Hardness-Shore Di 38 _ Key Characteristics: Flexibility, Abrasion Res., Higher Solids L54: Dry Time: Set, minutes (3 mils wet film): 100 Dry Hard: minutes: 330 Sward Hardness @ 24 hours/72 hours: 12/16 Film Properties: Tensile Strensth-nsi: 7000 Elongation-Percent: 300 100% Modulus-psi: 3000 Tear Strength, Split-pli: 130 Hardness-Shore D: 55 Taber Abrasion Resistance (mg. loss): 30 Key Characteristics: Flexibility, Viscosity Control ifier), Compatibility L55: Dry Time: Set, minutes (3 mils wet film): 30 Dry Hard: minutes: 75 Sward Hardness @ 24 hours/72 hours: 8/8 Film Properties: Tensile Strength-psi: 6200 Elonsation-Percent: 660 lOO%-Modulus-psi: 500 Tear Strenqth, Split-pli: 180 Hardness-Shore Di 36 _ Key Characteristics: Flexibility, Wet Rub, Cold Flex

(mod-


REICHHOLD CHEMICALS, INC.: SPENSOL L Water Reducible Resins(Continued):

Urethane

Typical Clear Film Properties(Continued): Aliphatic: L56: Dry Time: Set, minutes (3 mils wet film): 90 Dry Hard: minutes: 330 Sward Hardness @ 24 hours/J2 hours: 8/10 Film Properties: Tensile Strength-psi: 5200 Elongation-Percent: JO0 100% Modulus-psi: 350 Tear Strength, Split-pli: 125 Hardness-Shore D: 60 Key Characteristics: Flexibility, Higher Solids Aromatic: L41: Dry Time: Set, minutes (3 mils wet film): 135 Dry Hard: minutes: 420 Sward Hardness @ 24 hours/J2 hours: 26/38 Film Properties: Tensile Strength-psi: 7500 Elongation-Percent: 280 100% Modulus-psi: 3100 Tear Strength, Split-pli: 200 Hardness-Shore D: 58 Taber Abrasion Resistance (mg. loss): J Key Characteristics: Hardness, Flexibility, Abrasion Res. L44: Dry Time: Set, minutes (3 mils wet film): 45 Dry Hard: minutes: 115 Sward Hardness @ 24 hours/72 hours: 24/26 Film Properties: Tensile Strength-psi: 6300 Elongation-Percent: 360 100% Modulus-psi: 2400 Tear Strength, Split-pli: 210 Hardness-Shore D: 50 Taber Abrasion Resistance (mg. loss): 35 Key Characteristics: Flexibility, Low Cost

357

358 Water-Soluble

Resins

SARTCIWRR CO.: SARTOMRR Water Dispersible

Monomers:

344:

Polyethylene Glycol (400) Diacrylate Clear Liquid Reactive Esters %: 99+ Odor: Mild Color APHA: 100 Molecular Weight: 508 Specific Gravity @ 25C: 1.1134 Viscosity @ 25C cps: 56-65 Inhibitor HQ ppm: 500+-100 MEHQ Water @ 25C Solubility (g/l00 g H20): (5 >75 Water @ 25C Dispersability (g/100 g H20): 5-75 361

:

Diethylamino-ethyl Acrylate Clear Yellow Liquid Reactive Esters %: 99+ Odor: Fishv Color APHA- 100 Molecular Weight: 171 Specific Gravity @ 25C: 0.9250 Viscosity @ 25C cps: l-10 Inhibitor HQ ppm: 25+-10 MEHQ Water @ 25C Solubility (g/l00 g H20): 0.1 Water @ 25C Dispersability (g/l00 g H20): 0.5 604: Polypropylene Glycol Monomethacrylate Appearance: Clear Liquid Reactive Esters %: 99 Odor: Mild Color APHA: 50 Molecular Weight: 350-387 Snecific Gravitv @ 25C: 1.0100 Viscosity @ 25C!-cps: lo-20 Inhibitor HQ ppm: 900+-100 MEHQ Water @ 25C Solubility (g/lOOg H20): 0.1 Water @ 25C Dispersability (g/lOOg H20): 0.5 607:

Polypropylene Glycol Monacrylate Clear Liquid Reactive Esters %: 99 Odor: Mild Color APHA: 50 Molecular Weisht: 335-372 Specific Gravity @ 25C: 1.0284 Viscosity @ 25C cps: 50-60 Inhibitor HQ ppm: 900+-100 MEHQ Water @ 25C Solubility (g/lOOg H20): 0.1 Water @ 25C Dispersability (g/lOOg H20): 0.5

Sartomer Co.

SARTOMBR CO.: SARTOMBR Water Dispersible

Monomers(Continued):

676: Butanediol Monoacrylate Clear Liquid Reactive Esters %: 98 Odor: Virtually Odorless Color APHA: 150 Molecular Weight: 144 Specific Gravity @ 25C: 1.0390 Viscosity @ 25C cps: IO-15 Inhibitor HQ ppm: 300+-50 MEHQ Water 8 25C Solubility (g/lOOg H20): Soluble Water 8 25C Dispersability (g/lOOg H20): 681: Vinyl Caprolactam Yellow Solid Reactive Esters %: 98 Odor: Mild Color APHA: 250 Molecular Weight: 139 Specific Gravity @ 25C: 1.0100 Viscosity @ 25C cps: N/A Inhibitor HQ ppm: 10 Kerobit BPD Water @ 25C Solubility (g/lOOg H20): 4 9035:

Highly Alkoxylated Triacrylate Clear Liquid Reactive Esters %: 99+ Odor: Mild Color APHA: 100 Molecular Weisht: 1000 Specific Gravity 8 25C: 1.1490 Viscosity 8 25C cps: 150-250 Inhibitor HQ ppm: 500+-200 MEHQ Water @ 25C Solubility (g/lOOg H20): (5 >75 Water 8 25C Dispersability (g/lOOg H20): 5-75

359

360

Water-Soluble

Resins

SARTOMRR CO.: SARTOMER Water Dispersible


344: Monomer Features: * Difunctional * Produces Soft, Flexible Films Applications: * Flexible Coatings * Overprint Varnishes * Offset Inks * "No Wax" Vinyl Tile Coatings * Dental Compounds 361:

Monomer Features: * Monofunctional * Wet Adhesion Promoter * Contains an Amino Group, a Source for Cationic Charge Density Applications: * Dye Additives * Coatings * Resists * Photopolymers 604:

Monomer Features: * Monofunctional Applications: * Coatings * Emulsion Polymers * Photoresists * Photopolymer Printing Plates 607

:

Monomer Features: * Monofunctional Awlications: *-Coatings * Emulsion Polymers * Photoresists * Photopolymer Printing Plates

Sartomer

SARTOMER CO.: SARTOMER Water Dispersible

Co.


676: Monomer Features: * Monofunctional * Contains a Reactive Hydroxyl Moiety Applications: * Urethane Prepolymers * Acrylamide Cationic Polymers * Wet Strength Paper Additives * Homopolymers used in Electrophotographic Resins * Copolymers and Homopolymers for Water Treatment and Mineral Processing * Aqueous Automotive OEM Finishes * Wood Topcoats * Vinyl Tile Coatings * Textile Backcoatings * Aqueous Dispersions for Coil Coatings and Wood Products * Flat Board Topcoatings 681: Monomer Features: * Excellent Reactive Diluent * Fast Cure Response * Can Undergo Cationic Cure Mechanisms * Contains Polar Captam Group Applications: * Lubricating Oil Additives * Homopolymer for Potential use in Water Soluble Coatings * Vinyl CaprolactamfVinyl Acetate Copolymers 9035:

Monomer Features: * Highly Water Soluble * Trifunctional Annlications: *‘Photoresists * Photopolymer Printing Plates * Emulsion-Polymers * Aqueous Thickeners

361

362

Water-Soluble

Resins

STANCHEM INC.: Polymers and Polymeric

Specialties:

Paints and Building Products Polymers: 5011:

Vehicle base for interior in high PVC range. Excellent svstems. Polyvinyl acetate-acrylic Viscosity (cps): 800-1400 Solids % (min.): 54.5 Average Particle Size, M: Ta. C: 9 pi'@ 25C: 2-4 Weight lb/gal: 9.0 Ionic Charge: Nonionic

and exterior paints, especially compatibility with tinting

-z

copolymer 0.2-0.4

6035: Excellent scrubbability, freeze-thaw resistance, leveling properties. Outstanding exterior durability and long term tint retention. Acrylic copolymer Viscosity (cps): 500-1000 Solids % (min.): 46 Average Particle Size, M: 0.05-0.1 Tg, C: 8 pH @ 25C: 9-10 Weight lb/gal: 8.6 Ionic Charge: Nonionic 6064: Emulsion for exterior paints with good adhesion to chalky surfaces. Acrvlic covolvmer Viscosity icpS): 300-1000 Solids % (min.): 60 Average Particle Size, M: 0.2-1.0 Tg, C: 2 pH @ 25C: 9.0-9.5 Weight lb/gal: 8.9 Ionic Charge: Anionic 6088:

Excellent leveling and high film build properties, for use in formulating one coat systems. Resists dirt pick up. Acrylic copolymer Viscosity (cvs): 1500-2500 Solids %-(min.): 49.5 Average Particle Size, M: 0.2-1.0 Ta. C: 8 pi'@ 25C: 9-10 Weight lb/gal: 8.7 Ionic Charge: Anionic

StanChem,

Inc.

STANCHEM INC.: Polymers and Polymeric Specialties(Continued): Paints and Building Products Polymers(Continued): 7013: Superior hardener with chemical resistance discoloration at high temperatures. Acrylic polymer solution Viscosity (cps): 1200-2500 Solids % (min.): 39 Tg, C: 105 Weight lb/gal: 8.0 Ionic Charge: MEK system

properties.

No

Paper and Paperboard Coatings: 5071: Superior pigment binder. Excellent chemical and mechanical stability. Polyvinyl acetate homopolymer Viscositv Icus 1: 100 Solids %-(min.i: 49.5 Averaqe Particle Size, M: 0.15-0.25 TU.

CI

34

pii.@ 25C: 6.3-7.3 Weight lb/gal: 8.6 Ionic Charge: Anionic 5086:

Fine particle size pigment binder with superior binding ability. Excellent pit resistance. Polyvinyl acetate homopolymer Viscosity (cps): (200 Solids % (min.): 49.5 Average Particle Size, M: 0.1-0.25 Tg, c: 33 pH 8 25C: 6.5-7.5 Weight lb/gal: 8.7 Ionic Charge: Essentially nonionic 6026:

Excellent binder for paper products. Acrylic solution Viscosity (cps): 750-900 Solids % (min.): 29.5 Tg, C: 105 Weight lb/gal: 8.5 Ionic Charge: Solvent system

Superior wet strength.

363

364

Water-Soluble

Resins


Specialties(Continued):

Paper and Paperboard Coatings(Continued1: 7071: Finish coat for high gloss with good printability. drying clear solution. Water-soluble acrylic solution Viscosity (cps): (500 Solids % (min.): 19 Tg, C: 10 pH @ 25C: 7.5-8.0 Weight lb/gal: 8.4 Ionic Charge: Nonionic

Quick

Textiles: 6008: Superior dry cleaning and laundering wear for nonwovens and fabrics. Outstanding non-yellowing resistance. Crosslinking soft acrylic Viscosity (cps): 300-700 solids % (min.): 45 Average Particle Size, M: 0.05-0.1 Tg, C: 7 pH @ 25C: 2.8-3.2 Weight lb/gal: 8.9 Ionic Charge: Essentially nonionic 6016:

Excellent stiffener for high loft nonwovens loft characteristics without imparting tack. Crosslinking hard acrylic Viscosity (cps): 50-300 Solids % (min.): 46 Average Particle Size, M: 0.05-0.1 Tg, c: 40 pH @ 25C: 5.0-6.0 Weight lb/gal: 8.9 Ionic Charge: Nonionic

to maintain

6026:

Imparts soft hand to fabrics and nonwovens. ance to dry cleaning and laundering. Crosslinking soft acrylic Viscosity (cps): (200 Solids % (min.): 45 Average Particle Size, M: 0.05-0.1 Tg, C: -20 pH @ 25C: 6.0-6.5 Weight lb/gal: 8.7 Ionic Charge: Anionic

Excellent

resist-

StanChem, Inc.


365


Textiles(Continued): 6074: Excellent finishing properties, color stabil ity, res istance to laundering and dry cleaning. Good binder for natural fibers. Selfcrosslinking acrylic Viscosity (cps): 50 Solids % (min.): 45 Average Particle Size, M: 0.1-1.0 Tc. C: 19 PI-I.@25C: 3-5 Weight lb/gal: 8.8 Ionic Charge: Anionic Caulks and Sealants: 5009: Wide compatibility with modifiers and high solvent tolerance for general purpose adhesive compounding. A higher viscosity version is available. Polyvinyl acetate homopolymer Viscosity (cps): 850-1000 Solids % (min.): 54.5 Average Particle Size, M: l-3 Tg, C: 38 pH @ 25C: 4.0-5-O Weight lb/gal: 9.1 Ionic Charge: Nonionic 5019: Good water resistance and high electrolyte tolerance for use in adhesives, joint cements and textile sizing. Polyvinyl acetate homopolymer Viscosity (cps): 1000-1600 Solids % (min.): 54.5 Average Particle Size, M: 0.5-1.0 Tg, C: 36 pH @ 25C: 4.0-5.0 Weight lb/gal: 9.0 Ionic Charge: Nonionic 6050: High pigment tolerance and excellent and ultraviolet light. Acrylic copolymer Viscosity (cps): (300 Solids % (min.): 54.5 Average Particle Size, M: 0.2-1.5 Tg, C: -4 pH @ 25C: 4.2-4.8 Weight lb/gal: 8.8 Ionic Charge: Anionic

resistance

to water

366




Adhesives and Binders: 5016: Excellent quick tack, highly branched adhesive. Available a lower viscositv arade. Polyvinyl acetate homopolymer Viscosity (cp.5): 1500-1700 Solids %-(min.): 54.5 Average Particle Size, M: 1-3 To, C: 38 pi.@ 25C: 4.0-5.0 Weight lb/gal: 9.1 Ionic Charge: Nonionic

in

6053: Pressure sensitive with good adhesion, water resistance and mechanical stability. Excellent for instant grab applications. Acrylic copolymer Viscositv (cus): 500-1500 Solids %-(I&. j: 51 Average Particle Size, M: 0.2-1.0 Tg, Cl -50 pH 8 25C: 4.0-5.0 Weight lb/gal: 9.1 Ionic Charge: Nonionic 6116: Copolymer designed for pressure sensitive adhesives. Combines good peel strength, creep resistance and hot tensile strength. Acrylic copolymer Viscosity (cps): 50-175 Solids % (min.): 53 Average Particle Size, M: 0.1-0.5 Tg, CI -40 pH @ 25C: 7.2-8.2 Weight lb/gal: 8.6 Ionic Charge: Anionic 8000: General purpose adhesive. Dries clear with strong bonding for porous substrates such as wood. Compounded polyvinyl acetate Viscosity (cps): 2500-4000 Solids % (min.): 50 Average Particle Size, M: l-3 Tc. C: 15 pi?-@ 25C: 4.0-5.0 Weight lb/gal: 8.9 Ionic Charge: Nonionic

StanChem.

STANCHEM

Inc.

INC.: Polymers and Polymeric Specialties(Continued):

Thickeners and Additives: 6006: Effective "in situ" thickener for a variety of emulsion systems. Can be used as pigment dispersant. Acrylic copolymer Viscosity (cps): (50 solids % (min.): 27.5 Average Particle Size, M: 0.05-0.1 Tg, c: 14 pH @ 25C: 3.0-4.0 Weight lb/gal: 0.7 Ionic Charge: Anionic 6070:

Superior additive for water-base thickening applications. Acrylic emulsion with good mechanical shear resistance. Acrylic copolymer Viscosity (cps): cl00 solids % (min.): 29.5 Average Particle Size, M: 0.05-0.1 Tg, C: 14 pH @ 25C: 2.0-3.5 Weight lb/gal: 8.7 Ionic Charge: Anionic

367

368

Water-Soluble

Resins



STANCHEM 5179: STANCHEM 5179 is a poly-vinyl acetate homopolymer designed as a specialty binder for use in the non-wovens industry. STANCHEM 5179 also exhibits good water resistance and high wet strength. Typical Physical Properties: Type: Poly-vinyl acetate Solids by weight: 54.5-55.5% Viscosity @ 25C: ~2,000 cps pH @ 25C: 4.5-5.5 Free monomer: 0.2% Weight/gallon: 8.7 lbs./gal. Tg: 85C Ionic Charge: Anionic STANCHEM 6201: STANCHEM 6201 is a crosslinking acrylic polymer which is useful in a variety of textile and nonwoven applications. SC 6201 imparts laundering and dry cleaning durability, excellent tear strength and crease recovery, as well as improved pilling resistance. STANCHEM 6201 forms a hard, clear film which is highly resistant to UV discoloration. SC 6201 can be used to impart moderate stiffness of hand to all types of textiles and nonwovens. It is recommended for use in fabric finishing, as an adhesive in laminating, and for bonding nonwovens. Typical Physical Properties: Type: Crosslinking acrylic Solids by weight: 45-46% Viscosity @ 25C: less than 250 cps pH @ 25C: 3-4 Free monomer: less than 0.2% Weight/gallon: 8.8 lbs./gal. Tg: 40C Ionic Charge: Non-ionic

370




STANCHEM 6291: STANCHEM 6291 is a 100% acrylic copolymer emulsion designed for use in cementitous compositions. The addition of STANCHEM 6291 to cementitious compositions imparts increased flexibility, excellent weatherability and superior corrosion and water resistance. Advantages: - Excellent weatherability - Superior corrosion and water resistance - Increased flexibility - Odorless - Non-flammable - Solvent-free Typical Physical Properties: Type: 100% Acrylic copolymer emulsion Appearance: white liquid Solids by weight: 47-48% Viscosity @ 25C: 250 cps+-100 pH: 9.5-10.0 Ta: 12 c. Particle Size: 0.05-0.1 micron Weight/gallon: 8.8+-0.01 lbs./gal. Emulsifier Type: Nonionic

Thibaut

and

Walker

371

THIBAUT & WALKER: Vinyl Acrylic Copolymer Emulsion: pARc0: 58-C-55: NV:

55

Viscosity, cps: 1000-3000 pH: 4-5 Lbs./Gal. Wet: 8.80 Gals./Lb. Dry: .I08 Mechanical Stability: Exe % Free Monomer: ~0.5% Clarity: Exe Tg: 9C Gloss: High Interior wall paints, gloss and semi-gloss exterior house paints, and masonry paints. 69-C-55:

NV: 55 Viscosity, cps: 500-1500 pH: 4-5 Lbs./Gal. Wet: 8.80 Gals-/Lb. Dry: .I08 Mechanical Stability: Exe % Free Monomer: 285 (140) Particle Size: 98% through, U.IS. 20 me& Specific Gravity at 20/2OC: 1.38 to 1.,40 Volatile Matter, % ?zy wt: 5 Environmental Impact: Aqueous solutions of CELLOSIZE Hydroxyqethyl Cellulose do not appear to pose any ecological prloblems. FDA and EPA Status: CELLOSIZE Eydroxyethyl Cellulose (HEC) is presemtly approved, under regulations of the United States Folod and Drug Administration (FDA), folr use in indirect food applications, such as :foodpackaging adheisives and can and paper coatings. CE:LLOSIZE HlEC has ruot been c!leared fcr direct use as a component of food products. Under regulations of the Environmental Protection Agency (EPA;', it is e!xempt fro'm the requirement Iof a residue tolerance in pesticide formulaticns.

Union Carbide Corp.

UNION CARBIDE CORP.: POLYOX Water-Soluble

389

Resins:

POLYOX Water-Soluble Resins, CAS Registry No. 25322-68-3, are nonionic water-soluble poly(ethylene oxide) polymers supplied in a variety of viscosity grades. The degree of polymerization, n, varies from about 2,000 to about 180,000, depending on the viscosity grade of resin. Special Features: High Molecular Weight: The molecular weights of POLYOX Water-Soluble Resins range from about one hundred thousand to eight million and above. Completely Water Soluble: POLYOX Water-Soluble Resins, being polyethers, hydrogen bond with water and are completely soluble to just below the boiling point of water. Thickening Ability: POLYOX Water-Soluble Resins are extremely effective thickening agents in water. Friction Reduction: Very small (0.003 percent) concentrations of the higher molecular weight POLYOX Water-Soluble Resins can reduce the turbulent frictional drag of the water in which they are dissolved by as much as 80 percent. Lubricity: POLYOX Water-Soluble Resins impart a high degree of lubricity to water. Aesthetics: When solutions are applied to the skin, they produce a soft and "silky" feel. Nonionic: Being nonionic, POLYOX Water-Soluble Resins are more tolerant of salts than are polyelectrolytes. Form Novel Complexes: The strong hydrogen bonding affinity of POLYOX Water-Soluble Resins accounts for the association of these polyethers with various polar compounds. High Binding Efficiency: POLYOX Water-Soluble Resins have high binding efficiency for pigments, fillers, metal powders, and ceramics. Thermoplastic: As thermoplastics, POLYOX Water-Soluble Resins are readily calendered, extruded, molded, or cast. Soluble in Many Organic Solvents: POLYOX Water-Soluble Resins are readily soluble in and will thicken certain chlorinated solvents. Viscoelastic Behavior: The flexibility of ether linkages combined with the extremely high molecular weight of POLYOX Water-Soluble Resins produces elastic behavior in solution. Wet Tack: Solutions exhibit a high degree of wet tack. Flocculant Activity: Low Toxicity:

390


UNION CARBIDE CORP.: POLYOX Water-Soluble Function/Effect: Adhesive Binder Coating/Sizing Dispersant Drift Control Flocculation Hydrodynamic-Drag Reduction Lubricant/Emollient Rheology Modifier Thermoplastic Water Retention Industry: Agriculture Ceramics and Glass Chemical Construction Products Electrical Industrial Supply Metals and Mining Municipal Services Paint Paper Personal Care Products Petroleum Pharmaceutical Printing Soap and Detergents Textile

Resins(Continued):

Union Grbide

UNION CARBIDE CORP.: POLY'OX Water-Soluble

Corp.

391

RNesins(Continued):

POLYOX Grade: -WSR N-*0: Approximate Molecular Weight: 100,000 Viscosity Range, cP: Aqueous Salution at 25C: 5%: 12-50 WSR N-80: Approximate Molecular Weight: 200,000 Viscosity Range, cP: Aqueous Solution at 25C: 5%: 65-115 WSR N-750: Approximate Molecular Weight: 300,000 Viscosity Range, cP: Aqueous Sollution at 25C: 5%: 600-1100 WSR N-3000: Approximate Molecular Weight: 400,000 Viscosity RaNge, cP: A,queous Sollution at 25C: 5%: 2250-450~0 WSR-3333: Approximate Molecular Weight: 400,000 Viscosity RaNge, cP: Aqueous Solution at 25C: 5%: 2250-3350 WSR-205: Approximate Molecular Weight: 600,000 Viscosity RaNge, cP: Aqueous Sollution at 25C: 5%: 4500-8800 WSR-1105: Approximate Eolecular Weight: 9~00,000 Viscosity Range, cPi Aqueous Solution at 25C: 5%: 8800-17,600 WSR-N-121(: Approximate Molecular Weight: l,OOO,OOO Viscosity RaNge, cP: Aqueous Solution at 25C: 2%: 400-800 WSR-N-COK: Approximate Molecular Weight: 21,000,OOO Viscosity RaNge, cP: Aqueous Solution at 25C: 2%: 2000-4000 WSR-301: Approximate Molecular Weight: &,,OOO,OOO Viscosity Range, cP: Aqueous Solution at 25C: 1%: 1650-5560 WSR Coagulant: Approximate Nlolecular Weight: 51,000,OOO Viscosity Range, cP: Aqueous Solution at 25C: 1%: 5500-75C0 WSR-30%: Approximate Mlolecular Weight: 7,000,OOO Viscosity Range, cP: Aqueous Solution at 25C: 1%: 7500-10,000 UCARFLOC Polymer 309: Approximate Molecular Weight: 8,000,OOO Viscosity Range, cP: Aqueous Solution at. 25C: 1%: lO,OOO-15,000

392

Water-Soluble

Resins

UNION CARBIDE CORP.: POLYOX Water-Soluble

Resi.ns(Continued):

Properties(Continued): POLYOX NF Grades: Contact your Union Carbide Sales Representative resins that meet the NF standard.

regarding

POLYOX Compounds: WRPA-3154 Extrusion Grade: WRPA-3154 Molding Grade: WRPA-5779 Extrusion Grade: WRPA-5779 Molding Grade: Specially formulated compounds for injection molding and extrusion applications, possessing improved thermal stability and stress cracking resistance. Available in a range of melt flows for a variety of thermoplastics processing applications. Typical Physical Properties of POLYOX Water-Soluble

Resins:

Appearance: Off-white powder Crystalline Melting Point (X-ray and NMR), C: 62-67 Odor: Slightly ammoniacal Melt Flow Temperature, C: >98 Volatiles Content. as oackaued. % bv wt (at 105C): ~1.0 Alkaline Earth Metals,*% by-wt.as CaO, max: 1.0 Powder Bulk Density, lb/ft 3 (kg/m 3): 19-37 (304-593) Polymer Density, glee: 1.15-1.26 Moisture Content, as packaged, %: (1 Heat of Fusion, cal/gm: 33 Solution pH: 8-10 Particle Size, % by wt: Average through IO-mesh (U.S. Standard): 100 20-mesh 96 EPA Status: POLYOX Water-Soluble Resins are identified by the Federal Environmental Protection Agency in 40 CFR 180.1001(d) for unrestricted use as inert ingredients in pesticide formulations applied to crops up to the time of harvest. FDA Status: Considerable interest has been shown in POLYOX Water-Soluble Resins for diverse applications in food, drug and cosmetic products. Such uses fall within the scope of the Federal Food, Drug and Cosmetic Act. FDA has recognized and approved the use of poly(ethylene oxide) polymers (POLYOX Water-Soluble Resins) for specific food packaging uses, and as direct additive to beer.

Unocal Chemicals Division

UNOCAL CHEMICALS DIVISION: Acrylic: 76 RES 6272: Solids (%): 66.0 Viscosity (cps): 2,800 pH: 4.0 Wt. (lbs)/Gal.: 8.30 Particle Charge: Nonionic Particle Size (Microns): 0.3 Tg (C): -68 Crosslink: N/A Comments: Compounding base for repositionable high peel and tack systems. Markets: Pressure Sensitive Adhesives 76 RES 9201: Solids (%): 66.0 Viscosity (cps): 2,250 pH: 4.8 Wt. (lbs)/Gal.: 8.30 Particle Charge: Nonionic Particle Size (Microns): 0.3 Tg (C!): -68 Crosslink: N/A Comments: PSA application, general purpose, semi-permanent removable. Markets: Pressure Sensitive Adhesives 76 RES 6204: Solids (%): 64.0 Viscosity (cps): 1,650 pH: 5.0 Wt. (lbs)/Gal.: 8.40 Particle Charge: Nonionic Particle Size (Microns): 0.3 Tg (C): -66 Crosslink: N/A Comments: Acrylic compounding base for general purpose permanent applications. Imparts good adhesion to polyolefins. Markets: Pressure Sensitive Adhesives 76 RES 6247: Solids (%): 65.0 Viscosity (cps): 2,500 pH: 4.6 Wt. (lbs)/Gal.: 8.60 Particle Charge: Nonionic Particle Size (Microns): 0.3 Tg (C): -66 Crosslink: N/A Comments: Specifically designed to be compounded into a high peel, high tack PSA. Markets: Pressure Sensitive Adhesives

393

394


UNOCAL CHEMICALS DIVISION: Acrylic(Continued): RES 9202: Solids (%): 64.0 Viscosity (cps): 3,300 DH: 4.8 Wt. (lbs)/Gal.: 8.50 Particle Charge: Nonionic Particle Size-(Microns): 0.3 Tg (C): -66 Crosslink: N/A Comments: High peel general purpose permanent pressure sensitive adhesive. Markets: Pressure Sensitive Adhesive 76 RES 9204: Solids (%): 64.0 Viscosity (cps): 3,350 pH: 5.3 Wt. (lbs)/Gal.: 8.40 Particle Charge: Nonionic Particle Size (Microns): 0.3 Tg (C): -66 Crosslink: N/A Comments: PSA application, water resistant. With good adhesion to polvolefins. Markets: Pressure Sensitive Adhesives 76 RES 9211: Solids (%): 62.0 Viscosity (cps): 1,500 pH: 5.5 Wt. (lbs)/Gal.: 8.50 Particle Charge: Nonionic Particle Size (Microns): 0.3 Tg (C): -66 Crosslink: N/A Comments: PSA application, excellent adhesion to polyolefins. Markets: Pressure Sensitive Adhesives 76 RES 6230: Solids (%): 51.0 Viscosity (cps): 50 pH: 3.5 Wt. (lbs)/Gal.: 8.50 Particle Charge: Anionic Particle Si&(Microns): 0.4 Tg (C): -50 Crosslink: N/A Comments: High clarity, high tack compounding base for permanent and overlaminating applications. Markets: Pressure Sensitive Adhesives 76


UNOCAL CHEMICALS DIVISION: Acrylic(Continued): RES 6501: Solids (0): 51.0 Viscosity (cps): 55 pH: 4.5 Wt. (lbs)/Gal.: 8.60 Particle Charge: Anionic Particle Size (Microns): 0.4 Tg (C): -50 Crosslink: N/A Comments: High clarity, low viscosity laminating adhesive for film and paper. High temperature-humidity resistant primer for PVDC film coatings. Markets: Flexible Packaging 76 RES 9611: Solids (%): 60.0 Viscosity (cps): 1,100 pH: 4.9 Wt. (lbs)/Gal.: 8.50 Particle Charge: Nonionic Particle Size (Microns): 0.3 Tg (C): -40 Crosslink: Yes Comments: Compounding base with excellent balance of properties including plasticizer and humidity resistance. Markets: Pressure Sensitive Adhesives 76 RES 9612: Solids (%): 56.0 Viscosity (cps): 3,300 pH: 6.5 Wt. (lbs)/Gal.: 8.50 Particle Charge: Nonionic Particle Size (Microns): 0.28 Tg (C): -40 Crosslink: Yes Comments: Has excellent plasticizer resistance and adhesion build. Should be used in vinyl applications where intermediate shear is desired. Markets: Pressure Sensitive Applications 76 RES 3114: Solids (%): 46.0 Viscosity (cps): 300 DH: 2.7 Wt. (lbs)/Gal.: 8.70 Particle Charge: Nonionic Particle Size-(Microns): 0.2 Tg (C): -33 Crosslink: Self Comments: Textile finishing. Nonwoven binder. Flocking and laminating adhesive. Markets: Nonwovens/Textiles 76

395

396


UNOCAL CHEMICALS DIVISION: Acrylic(Continued): 76 RES 3514: Solids (%): 46.0 Viscosity (cps): 60 pH: 2.4 Wt. (lbs)/Gal.: 8.70 Particle Charge: Nonionic Particle Size (Microns): 0.2 Tg (C): -33 Crosslink: Self Comments: Self-crosslinkins acrylic exhibiting high humidity adhesion to nylon, polypropylene and polyester films. Should not be self wound. Markets: Flexible Packaging 76 RES 9634: Solids (2): 46.0 Viscositv (CDs): 300 pH: 2.7 Wt. (lbs)/Gal.: 8.70 Particle Charge: Nonionic Particle Size (Microns): 0.2 Tg (C): -33 Crosslink: Self Comments: Low tack, low peel adhesive for protective films and removable graphic arts applications. Markets: Pressure Sensitive Adhesives 76 RES 6308: Solids (%): 46.0 Viscosity (cps): 200 pH: 3.5 Wt. (lbs)/Gal.: 8.90 Particle Charge: Anionic Particle Size (Microns): 0.25 Tg (C): -27 Crosslink: Self Comments: Soft hand with excellent water and solvent tensile properties. Pigment binder and flocking adhesive. Markets: Nonwovens/Textiles 76 RES 9628: Solids (%): 56.0 Viscosity (cps): 3,000 pH: 5.5 Wt. (lbs)/Gal.: 8.60 Particle Charge: Nonionic Particle Size (Microns): 0.3 Tg (C): -25 Crosslink: Yes Comments: High temperature and high shear PSA for tape and label applications with exceptional plasticizer resistance. Markets: Pressure Sensitive Adhesives


397

UNOCAL CHEMICALS DIVISION: Acrylic(Continued): 76

RES 9636: Solids (%): 56.0 Viscosity (cps): 1,000 pH: 5.2 Wt. (lbs)/Gal.: 8.50 Particle.Charge: Nonionic Particle Size (Microns): N/A Tg

(C):

-25

Crosslink: Yes Comments: Compounding base with outstanding shear and high temperature performance plus plasticizer resistance. Markets: Pressure Sensitive Adhesives 76 RES 6922: Solids (%): 46.0 Viscositv (~13s): 500 pH: 3.5 Wt. (lbs)/Gal.: 8.80 Particle Charge: Anionic Particle Size (Microns): 0.2 Tg (C): -23 Crosslink: Self Comments: Textile finishing, pigment binder. Nonwoven binder. Markets: Nonwovens/Textiles 76 RES 6326: Solids (%): 46.0 Viscosity (cps): 100 DH: 6.5 Wt. (lbs)/Gal.: 8.60 Particle Charge: Anionic Particle Size-(Microns): 0.2 Tg (C): -21 Crosslink: Self Comments: Nonwoven binder. Markets: Nonwovens/Textiles 76 RES 3218: Solids (%): 46.0 Viscositv (CDS): 250 pH: 2.7 Wt. (lbs)/Gal.: 8.70 Particle Charge: Nonionic Particle Size (Microns): 0.1 Tg (C): -20 Crosslink: Self Comments: Textile finishing, backcoating, flocking and laminating. Markets: Textiles

398


UNOCAL CHEMICALS DIVISION: Acrylic(Continued): 76 RES 6304: Solids (%): 46.0 Viscosity (cps): 300 pH: 5.5 Wt. (lbs)/Gal.: 8.70 Particle Charge: Nonionic Particle Size (Microns): 0.2 Tg (C): -11 Crosslink: Self Comments: Textile finishing, backcoating, pigment binder. Nonwoven binder. Markets: Nonwovens/Textiles 76 RES 6309: Solids (%): 49.0 Viscosity (cps): 350 pH: 5.0 Wt. (lbs)/Gal.: 8.80 Particle Charge: Anionic Particle Size (Microns): N/A Tg (C): -9 Crosslink: Self Comments: Textile finishing, pigment binder. Nonwoven binder and backcoating. Excellent solvent resistance. Markets: Nonwovens/Textiles 76 RES 3215: Solids (%): 40.0 Viscosity (cps): 200 pH: 7.3 Wt. (lbs)/Gal.: 8.80 Particle Charge: Anionic Particle Size (Microns): 0.1 Tg (C): -5 Crosslink: yes Comments: Leather finishing. Markets: Textiles 76 RES ST6004: Solids (%): 55.0 Viscosity (cps): 350 pH: 8.0 Wt. (lbs)/Gal.: 8.90 Particle Charge: Anionic Particle Size (Microns): 0.25 Tg (C): +2 Crosslink: N/A Comments: Excellent flexibility and wet adhesion in exterior and interior coatings. Markets: Paint


399

UNOCAL CHEMICALS DIVISION: Acrylic(Continued): RES 6510: Solids (%): 65.0 Viscosity (cps): 800 pH: 9.0 Wt. (lbs)/Gal.: 9.00 Particle Charge: Anionic Particle Size (Microns): 0.2 Tg (C!): +3 Crosslink: N/A Comments: Fine particle size and high molecular weight provide excellent grain crack resistance and tint retention. Higher solids allow greater formulating latitude. Markets: Paint 76 RES UC60012: Solids (%): 55.0 Viscosity (cps): 450 pH: 7.5 Wt. (lbs)/Gal.: 8.90 Particle Charge: Anionic Particle Size (Microns): 0.3 Tg (C): +3 Crosslink: N/A Comments: Vinyl chloride free terpolymer for interior semi-gloss systems. Excellent gloss, enamel holdout, wet adhesion, and chalk adhesion. Markets: Paint 76 RES 3112: Solids (pi): 46.0 Viscosity (cps): 35 pH: 2.7 Wt. (lbs)/Gal.: 8.90 Particle Charge: Nonionic Particle Size (Microns): 0.1 Tg (C): +26 Crosslink: Self Comments: Textile finishinq and backcoatinq. Nonwoven binder. Markets: Nonwovens/Textiles 76 RES 3512: Solids (%): 46.0 Viscosity (cps): 35 pH: 2.3 Wt. (lbs)/Gal.: 8.90 Particle Charge: Nonionic Particle Size (Microns): 0.1 Tg (C): +26 Crosslink: Self Comments: Self-crosslinking acrylic exhibiting good adhesion to nylon, polypropylene and polyester films. Nonblocking primer for films. Markets: Flexible Packaging 76

400

Water-soluble

Resins

UNOCAL CHEMICALS DIVISION: Acrylic(Continued): 76

76

RES 6038: Solids (%): 13.5 Viscosity (cps): 21,000 pH: 9.0 Wt. (lbs)/Gal.: 8.90 Particle Charge: N/A Particle Size (Microns): N/A Tg (C): N/A Crosslink: No Comments: Sodium Polyacrylate thickener for adhesive applications. Markets: General Adhesives/Pressure Sensitive Adhesives RES 8306: Solids (%): 13.5 Viscosity (cps): 21,000 pH: 9.0 Wt. (lbs)/Gal.: 8.90 Particle Charge: N/A Particle Size (Microns): N/A Crosslink: No Comments: Sodium Polyacrylate thickener for textile applications. Markets: Textiles


UNOCAL CHEMICALS DIVISION: Carboxylated

401

Styrene Butadiene:

76 RES 9410: Solids (%): 50.0 Viscosity (cps): 500 pH: 8.7 Wt. (lbs)/Gal.: 8.10 Particle Charge: Anionic Particle Size (Microns): 0.15 Tg (C): -61 Crosslink: N/A S/B Ratio: 25175 Comments: A very soft carboxylated SBR with high molecular weight. Excellent for compounding low temperature tapes and label systems. Markets: Pressure Sensitive Adhesives 76 RES 9413: Solids (%I: 50.0 Viscositv (CDS): 200 pH: 8.8 Wt. (lbs)/Gal.: 8.20 Particle Charge: Anionic Particle Size (Microns): 0.15 Ts (C): -46 Crossiink: N/A S/B Ratio: 35/65 Comments: A very soft carboxylated SBR for compounding general purpose permanent labels, especially where high adhesion to corrugated surfaces is required. Markets: Pressure Sensitive Adhesives 76 RES 9412: Solids (%): 50.0 Viscosity (cps): 600 pH: 9.7 Wt. (lbs)/Gal.: 8.30 Particle Charge: Anionic Particle Size (Microns): 0.15 Tg (C): -45 Crosslink: No S/B Ratio: 20/80 Comments: Very soft carboxylated SBR with outstanding shear properties. Excellent for compounding high performance tapes and labels. Markets: Pressure Sensitive Adhesives

402


UNOCAL CHEMICALS DIVISION: Carboxvlated (Continued):

Stvrene Butadiene _

76 RES 4125:

Solids (%): 50.0 Viscosity (cps): 300 pH: 9.0 Wt. (lbs)/Gal.: 8.30 Particle Charge: Anionic Particle Size (Microns): 0.15 Tg (C): -32 Crosslink: Yes S/B Ratio: 45155 Comments: Upholstery backcoating. Markets: General Adhesives/Textiles 76 RES 6105: Solids (%): 50.0 Viscosity (cps): 150 PH: 8.7 wt. (lbs)/Gal.: 8.30 Particle Charge: Anionic Particle Size-(Microns): 0.25 Tg (C): -32 Crosslink: N/A S/B Ratio: 45/55 Comments: Pressure sensitive latex for compounding Hi-Tack adhesives. Markets: Pressure Sensitive Adhesives 76 RES 6130: Solids (%a): 50.0 Viscosity (cps): 300 pH: 8.1 Wt. (lbs)/Gal.: 8.30 Particle Charge: Anionic Particle Size (Microns): 0.2 Tg (C): -32 Crosslink: N/A S/B Ratio: 45/55 Comments: Compounding base for High-Tack label and tape adhesives. Markets: Pressure Sensitive Adhesives 76 RES 9415: Solids (%): 50.0 Viscosity (cps): 200 pH: 9.5 Wt. (lbs)/Gal.: 8.20 Particle Charge: Anionic Particle Size (Microns): 0.25 Tg (C): -32 Crosslink: N/A S/B ratio: 45/55 Comments: PSA, for compounding Hi-Tack, available West Coast only. Markets: Pressure Sensitive Adhesives


UNOCAL CHEMICALS DIVISION: Carboxylated (Continued):

Styrene Butadiene

76 RES 4151: Solids (%a): 50.0 Viscositv Icns): 300 pH: 9.0 Wt. (lbs)/Gal.: 8.35 Particle Charge: Anionic Particle Size (Microns): 0.15 Tu (C): -30 Crosslink: Yes S/B Ratio: 45/55 Comments: Textile backcoating, nonwoven binder, pigment binder. Markets: Nonwovens/Texiles 76 RES 4305: Solids (%): 53.0 Viscosity (cps): 500 pH: 8.7 Wt. (lbs)/Gal.: 8.40 Particle Charge: Anionic Particle Size (Microns): 0.2 Tg (C): -30 Crosslink: Yes S/B Ratio: 45/55 Comments: A soft zero formaldehyde binder for textiles and nonwovens. Markets: Nonwovens/Textiles 76 RES 4425: Solids (%): 53.0 Viscosity (cps): 600 pH: 8.7 Wt. (lbs)/Gal.: 8.30 Particle Charge: Anionic Particle Size (Microns): 0.15 Tg (C): -30 Crosslink: Yes S/B Ratio: 45/55 Comments: Textile backcoating finishing. Markets: Textiles

403

404


UNOCAL

CHEMICALS

DIVISION:

Carboxylated

Styrene Butadiene

(Continued): 76 RES 5550: Solids (%): 50.0 Viscosity (cps): 300 pH: a.7 Wt. (lbs)/Gal.: 8.40 Particle Charge: Anionic Particle Size (Microns): 0.15 Tg (C): -30 Crosslink: Self S/B Ratio: 45/55 Comments: Self-crosslinkinq, nonwoven binder. Markets: NonwovensfTextiles 76 RES 4176: Solids (%): 50.0 Viscosity (cps): 200 pH: 9.0 Wt. (lbs)/Gal.: 8.40 Particle Charge: Anionic Particle Size (Microns): 0.15 Tg (C): -22 Crosslink: Yes S/B Ratio: 50/50 Comments: Textile backcoating, nonwoven binder. Markets: General Adhesives/Nonwovens/Textiles 76 RES 4402: Solids (%): 53.0 Viscosity (cps): 300 i:I y&)/Gal.: 8.40 Particle Charge: Anionic Particle Size (Microns): 0.2 Tg (C): -22 Crosslink: Yes S/B Ratio: 50150 Comments: A medium soft polymer for nonwovens and paper saturation. Markets: Nonwovens/Textiles


UNOCAL CHEMICALS DIVISION: Carboxylated (Continued): 76 RES 4416: Solids (%): 51.0 Viscosity (cps): 300 pH: 8.7 Wt. (lbs)/Gal.: 8.35 Particle Charge: Anionic Particle Size (Microns): 0.2 Tg (C): -22 Crosslink: Yes S/B Ratio: SO/SO Comments: A medium soft binder with outstanding nonwovens or paper saturation. Markets: Nonwovens/Textiles 76

RES 4150: Solids (%): 50.0 Viscositv (ens): 300 pH: 9.0 Wt. (lbs)/Gal.: 8.40 Particle Charge: Anionic Particle Size (Microns): 0.15 Ts (C): -16 Crosslink: Yes S/B Ratio: 55/45 Comments: Carpet and upholstery backing. Markets: General Adhesives/Textiles

76

RES 4816: Solids (%): 53.0 Viscosity (cps): 300 pH: 8.7 Wt. (lbs)/Gal.: 8.35 Particle Charge: Anionic Particle Size (Microns): 0.2 Tg (C): -14 Crosslink: Yes S/B Ratio: 58/42 Comments: Carpet backing. Markets: Textiles

Styrene Butadiene

runnability for

405

406



Styrene Butadiene

76 RES 4817: Solids (%): 53.0 Viscosity (cps): 300 pH: 8.7 Wt. (lbs)/Gal.: 8.40 Particle Charge: Anionic Particle Size (Microns): 0.2 Tg (C): -14 Crosslink: Yes S/B Ratio: 58142 Comments: Carpet backing. Markets: Textiles 76 RES 4105: Solids (%): 50.0 Viscosity (cps): 300 pH: 6.0 Wt. (lbs)/Gal.: 8.40 Particle Charge: Anionic Particle Size (Microns): 0.14 Tg (C): -11 Crosslink: N/A S/B Ratio: 57143 Comments: Particle size designed for high solids blade coating runnability. Markets: Paper 76 RES 4100: Solids (%): 50.0 Viscosity (cps): 300 DH: 6.5 Ht. (lbs)/Gal.: 8.35 Particle Charge: Anionic Particle Size-(Microns): 0.2 Tg (C): -10 Crosslink: N/A S/B Ratio: 57/43 Comments: Paper coating, designed for offset & rotogravure grades. Protein compatible. Markets: Paper



Styrene Butadiene

76 RES 4040: Solids (%): 50.0 Viscosity (cps): 150 pH: 6.0 Wt. (lbs)/Gal.: 8.30 Particle Charge: Nonionic Particle Size (Microns): 0.2 Tg (C): -8 Crosslink: N/A S/B Ratio: 65/35 Comments: Adhesives, caulks & mastics; cement additive. Markets: General Adhesives 76 RES 4400: Solids (%): 53.0 Viscosity (cps): 200 DH: 8.5 Wt. (lbs)/Gal.: 8.35 Particle Charge: Anionic Particle Size-(Microns): 0.2 Tg (C): -8 Crosslink: Yes S/B Ratio: 63/37 Comments: Carpet backing. Markets: Textiles 76 RES 4002: Solids (%): 50.0 Viscosity (cps): 200 pH: 8.25 Wt. (lbs)/Gal.: 8.40 Particle Charge: Anionic Particle Size (Microns): 0.15 Tg (C): -7 Crosslink: N/A S/B Ratio: 65/35 Comments: Low odor SBR for use in interior vapor barrier primer sealers and flat wall paint. Markets: Paint

407

408


DNOCAL CHEMICALS DIVISION: Carboxylated (Continued): 76

Styrene Butadiene

RES 4076: Solids (%): 50.0 Viscosity (cps): 200

;Y: T&)/Gal.: 8.30 Particle Charge: Anionic Particle Size (Microns): 0.15 Tg (C): -7 Crosslink: N/A S/B Ratio: 65/35 Comments: Superior cold temperature touch-up. Outstanding low permeability coatings. Markets: Paint

vehicle for

76 RES 4104: Solids (%): 50.0 Viscosity (cps): 300 pH: 9.0 Wt. (lbs)/Gal.: 8.30 Particle Charge: Anionic Particle Size (Microns): 0.15 Tc (Cl: -7 Crosslink: N/A S/B Ratio: 65/35 Comments: Tape joint cement. Markets: General Adhesives 76 RES 4170: Solids (%): 50.0 Viscosity (cps): 200 t3FI ?&)/Gal.: 8.40 Particle Charge: Anionic Particle Size (Microns): 0.15 Tg (C): -7 Crosslink: Self S/B Ratio: 65/35 Comments: Carpet precoat. Coatings polymer. Nonwoven binder. Markets: General Adhesives/Nonwovens/Textiles



409

Styrene Butadiene

76 RES 4800: Solids (2): 50.0 Viscosity (cps): 200 pH: 10.5 Wt. (lbs)/Gal.: 8.35 Particle Charge: Anionic Particle Size (Microns): N/A Tg (C): -7 Crosslink: N/A S/B Ratio: 65/35 Comments: Extremely stable SBR emulsion designed for use as a modifier for concrete applications. Markets: General Adhesives 76 RES 4470: Solids (%): 53.0 Viscosity (cps): 350 DH: 9.0 Wt. (lbs.)/Gal.: 8.30 Particle Charge: Anionic Particle Size-(Microns): 0.15 Tg (C): -6 Crosslink: Yes S/B Ratio: 67/33 Comments: Firm polymer for carpets and textiles. Nonwoven binder. Markets: Nonwovens/Textiles 76 RES 4103: Solids (%): 50.0 Viscosity (cps): 300 pH: 6.0 wt. (lbs)/Gal.: 8.40 Particle.Charge: Anionic Particle Size (Microns): 0.2 Tg (C): -5 Crosslink: N/A S/B Ratio: 57/43 Comments: Excellent runnability and printability coatings. Markets: Paper

for high speed blade

4 10



Styrene Butadiene

76 RES 8100: solids (%I: 50.0 Viscosity (cps): 500 pH: 6.8 Wt. (lbs)/Gal.: 8.70 Particle Charge: Anionic Particle Size (Microns): 0.2 Tg (C): 0 Crosslink: N/A Comments: Paper coating, high strength for paper & paperboard. Markets: Paper 76 RES 4106: solids (a): 50.0 Viscosity (cps): 200 pH: 6.5 Wt. (lbs)/Gal.: 8.40 Particle Charge: Anionic Particle Size (Microns): 0.2 Tg (C): +76 Crosslink: No S/B Ratio: gO/lO Comments: An extremely hard latex used to modify hand. Develops sheet gloss for paper coatings. Markets: General Adhesives/Nonwovens/Paper/Textiles


UNOCAL CHEMICALS DIVISION: Polyvinylidene

Chloride:

76 RES 701: Solids (%): 45.0 Viscosity (cps): 150 pH: 2.0 Wt. (lbs)/Gal.: 10.00 Particle Charge: Anionic Particle Size (Microns): 0.25 Tg (C): -10 Alcohol Stable: Yes Comments: Laminating adhesive, excellent adhesion, solvent urethane replacement. -Flame retardant textile backcoating. Markets: Flexible Packaging/Textiles 76 RES 546: Solids (%): 46.0 Viscosity (cps): 160 ;:I f&)/Gal.: 10.30 Particle Charge: Anionic Particle Size (Microns): 0.25 Tg (C): +9 Alcohol Stable: Yes Comments: Waterbased laminating adhesive giving a good balance of bond strength and oxygen barrier in dry bond laminations. Also used as a primer for extrusion coating and laminating. Markets: Flexible Packaging 76

RES

917:

Solids (%): 50.0 Viscosity (cps): 50 pH: 3.5 Wt. (lbs)/Gal.: 9.90 Particle Charge: Anionic Particle Size (Microns): 0.25 Tg (C): +9 Alcohol Stable: Yes Comments: Softer version of 76 RES 777. Flame retardant textile backcoating. Leather finish. Markets: Paint/Textiles 76 RES M3-153: Solids (%): 50.0 Viscosity (cps): 100 pH: 2.0 Wt. (lbs)/Gal.: 10.40 Particle Charge: Anionic Particle Size (Microns): 0.25 Tg (C): +ll Alcohol Stable: Yes Comments: Moderate barrier laminating adhesive for film to film applications. Markets: Flexible Packaging

4 11

4 12 Water-Soluble Resins

UNOCAL CHEMICALS DIVISION: Polyvinylidene

Chloride(Continued):

76 RES 5517: Solids (%): 55.0 Viscositv (CDS): 10 pH: 2.0 Wt. (lbs)/Gal.: 10.50 Particle Charge: Anionic Particle Size (Microns): 0.25 Tg (C): +20 Alcohol Stable: Yes Comments: High barrier PVDC base coat for use on glassine, paper and paperboard. Markets: Flexible Packaging 76 RES 5527: Solids (8): 55.0 Viscosity (cps): 10 pH: 2.0 Wt. (lbs)/Gal.: 10.50 Particle Charge: Anionic Particle Size (Microns): 0.25 Tg (C): +20 Alcohol Stable: Yes Comments: High barrier basecoat for use on glassine, paper, and paperboard. High barrier laminating adhesive for treated film. Markets: Flexible Packaging 76 RES 777: Solids (%): 55.0 Viscosity (cps): 75 pH: 4.5 Wt. (lbs.)/Gal.: 9.70 Particle Charge: Anionic Particle Size (Microns): 0.35 Tg (C): +22 Alcohol Stable: Yes Comments: Latex vehicle for interior flat and semigloss flame retardant coatings. Markets: Paint 76 RES 5518: Solids (%): 60.0 Viscosity (cps): 50 pH: 2.5 Wt. (lbs)/Gal.: 11.00 Particle Charge: Anionic Particle Size (Microns): 0.25 Tg (C): Crystallizes Alcohol Stable: Yes Comments: High barrier coating for polyolefins and PET. Markets: Flexible Packaging


413

UNOCAL CHEMICALS DIVISION: Styrene Acrylic: 76 RES 1019: Solids (%): 50.0 Viscosity (cps): 9,000 pH: 8.50 Wt. (lbs)/Gal.: 8.50 Particle Charge: Anionic Particle Size (Microns): 0.15 Tg (C!): -15 Comments: Provides flexibility, alkali resistance and water resistance in high performance roof coatings and mastics. Exhibits high pigment binding capacity and adhesion to a variety of substrates. Textile printing. Markets: Nonwovens Paint Textiles 76 RES 1018: Solids (%): 50.0 Viscosity (cps): 5,000 pH: 7.5 Wt. (lbs)/Gal.: 8.50 Particle Charge: Anionic Particle Size (Microns): 0.15 Tg (C): +22 Comments: Highly effective in water-resistant coatings such as clears for masonry surfaces, vertical wall textured finishes. Provides good gloss-and clarity. Exhibits high pigment binding capacity. Textile finishing. Markets: Nonwovens Paint Textiles

4 14


UNOCAL CHEMICALS DIVISION: Vinyl Acetate Homopolymer: 76

RES 6206: Solids (%): 55.0 Viscosity (cps): 5,000 PH: 4.5 Wt. (lbs)/Gal.: 9.10 Particle Charge: Nonionic Particle Size-(Microns): 3.0 Tg (C): +20 Crosslink: N/A Borax Stability: Unstable Comments: Adhesives. Wood glue. Markets: General Adhesives

76

RES 3151: Solids (%): 55.0 Viscosity (cps): 1,200 PH:

5.0

Wt. (lbs)/Gal.: 9.10 Particle Charge: Nonionic Particle Size-(Microns): 0.4 Tg (C): +26 Crosslink: N/A Borax Stability: Unstable Comments: Concrete & stucco additive. Markets: General Adhesives 76

RES 6213: Solids (%): 55.0 Viscosity (cps): 2,500 pH: 4.5 Wt. (lbs)/Gal.: 9.10 Particle Charge: Nonionic Particle Size (Microns): 1.8 Tg (C): +26 Crosslink: N/A Borax Stability: Unstable Comments: Adhesives, high molecular weight. Markets: General Adhesives

76

RES 19RB64: Solids (%): 58.0 Viscosity (cps): 1,700 pH: 4.5 Wt. (lbs)/Gal.: 9.20 Particle Charge: Nonionic Particle Size (Microns): 0.6 Tg (C): +28 Crosslink: No Borax Stability: Stable Comments: Adhesives. Textile finishing. Markets: General Adhesives Textiles


4 15

UNOCAL CHEMICALS DIVISION: Vinyl Acetate Homopolymer(Continued): 76

76

76

76

RES 202A: Solids (%): 55.0 Viscosity (cps): 2,150 PH: 5.0 wt. (lbs)/Gal.: 9.10 Particle Charge: Nonionic Particle Size-(Microns): 0.9 Tg (C): +30 Crosslink: N/A Borax Stability: Unstable Comments: Adhesives. Textile finishing. Markets: General Adhesives Textiles RES 202AH: Solids (%): 55.0 Viscosity (cps): 3,000 PH: 5.0 it. (lbs)/Gal.: 9.10 Particle Charge: Nonionic Particle Size-(Microns): 0.9 Tg (C): +30 Crosslink: N/A Borax Stability: Unstable Comments: Adhesives. Textile finishing. Markets: General Adhesives Textiles RES 202AM: Solids (%): 55.0 Viscosity (cps): 1,250 pH: 5.0 Wt. (lbs)/Gal.: 9.10 Particle Charge: Nonionic Particle Size (Microns): 0.9 Tg (C): +30 Crosslink: N/A Borax Stability: Unstable Comments: Adhesives. Textile finishing. Markets: General Adhesives Textiles RES S-55: Solids (%): 55.0 Viscosity (cps): 1,000 pH: 5.0 Wt. (lbs)/Gal.: 9.10 Particle Charge: Nonionic Particle Size (Microns): 1.7 Tg (C): +35 Crosslink: Yes Borax Stability: Unstable Comments: Textile finishing & adhesives. Markets: General Adhesives Textiles

4 16


UNOCAL CHEMICALS DIVISION: Vinyl Acetate Homopolymer(Continued): 76

RES S-55E: Solids (%): 55.0 Viscosity (cps): 1,000 pH: 5.0 Wt. (lbs)/Gal.: 9.10 Particle Charge: Nonionic Particle Size (Microns): 1.7 Tg

(C):

+35

Crosslink: Yes Borax Stability: Unstable Comments: Textile finishing with excellent non-stick properties. Markets: Textiles 76

RES 6215: Solids (%): 65.0 Viscosity (cps): 2,300 EFi f&)/Gal.: 9.60 Particle Charge: Nonionic Particle Size (Microns): 0.35 Tg (C): N/A Crosslink: N/A Borax Stability: Stable Comments: Dextrine stabilized remoistenable Markets: General Adhesives

adhesive.


4 17

UNOCAL CHEMICALS DIVISION: Vinyl Acrylic: 76 RES 6255: Solids (%): 55.0 Viscosity (cps): 600 pH: 4.3 Wt. (lbs)/Gal.: 8.80 Particle Charge: Nonionic Particle Size (Microns): 0.4 Tg (C): -47 Crosslink: N/A Comments: Excellent for compounding high peel, high tack PSA's. Markets: Pressure Sensitive Adhesives 76 RES 9214: Solids (%): 55.0 Viscosity (cps): 2,100 pH: 4.5 Wt. (lbs)/Gal.: 8.70 Particle Charge: Nonionic Particle Size (Microns): 0.4 Tg (C!):-47 Crosslink: N/A Comments: Permanent high tack pressure sensitive adhesive for vinyl applications. Markets: Pressure Sensitive Adhesives 76 RES 9620: Solids (%): 53.0 Viscosity (cps): 4,000 pH: 5.6 Wt. (lbs)/Gal.: 8.60 Particle Charge: Nonionic Particle Size (Microns): 0.5 Tg (C): -35 Crosslink: N/A Comments: Repositionable pressure sensitive adhesive with excellent plasticizer migration resistance. Formulated for reverse roll coaters. Markets: Pressure Sensitive Adhesives 76 RES NWS-26: Solids (%): 46.0 Viscosity (cps): 300 pH: 5.0 Wt. (lbs)/Gal.: 8.80 Particle-Charge: Anionic Particle Size (Microns): 0.2 Tg (C): -15 Crosslink: Self Comments: A soft binder with good tensile properties and compatibility with a variety of chemical additives. Markets: Nonwovens/Textiles

4 18 Water-Soluble Resins

UNOCAL CHEMICALS DIVISION: Vinyl Acrylic(Continued): 76 RES 6930: Solids (%): 45.0 Viscosity (cps): 400 pH: 4.5 Wt. (lbs.)/Gal.: 8.80 Particle Charge: Anionic Particle Size (Microns): 0.2 Tg (C): -8 Crosslink: Self Comments: Textile finishing, backcoating, printing. Size press coating. Nonwoven binder. Markets: Nonwovens/Textiles 76 RES 3077: Solids (%): 55.0 Viscosity (cps): 2,150 pH: 5.0 Wt. (lbs)/Gal.: 9.00 Particle Charge: Nonionic Particle Size (Microns): 0.3 Tg (C): +l Crosslink: N/A Comments: Coatings polymer, excellent scrub resistance & film forming properties. Markets: Paint 76 RES 661: Solids (%): 55.0 Viscosity (cps): 1,000 pH: 4.5 Wt. (lbs)/Gal.: 9.00 Particle Charge: Nonionic Particle Size: 0.35 Tg (C): +3 Crosslink: N/A Comments: Coatings polymer, excellent scrub resistance. Good exterior ._.. durability. Markets: Paint 76 RES PEP: Solids (%): 40.0 Viscosity (cps): 2,000 pH: 5.0 wt. (lbs)/Gal.: 8.80 Particle-Charge: Anionic Particle Size (Microns): 1.25 Tg (C): +4 Crosslink: N/A Comments: Textile finishing, heat sealing & nonwoven binder. Markets: Nonwovens/Textiles


4 19

UNOCAL CHEMICALS DIVISION: Vinyl Acrylic(Continued): 76 RES 3083: Solids (%): 55.0 Viscosity (cps): 350 pH: 5.0 Wt. (lbs)/Gal.: 9.00 Particle Charge: Nonionic Particle Size (Microns): 0.3 Tg (C): +5 Crosslink: N/A Comments: Fine particle size for interior and exterior. Exhibits excellent scrub resistance and enamel holdout. Provides grain crack resistance and exterior durability. Markets: Paint 76 RES 3011: Solids (%): 55.0 Viscosity (cps): 2,000 pH: 3.0 wt. (lbs.)/Gal.: 9.00 Particle Charge: Nonionic Particle Size (Microns): 0.45 Tg

(C!):

+6

Crosslink: N/A Comments: Coatings polymer, excellent scrub resistance. Textile finishing. Markets: Paint 76 RES 3103: Solids (%): 50.0 Viscosity (cps): 120 pH: 6.0 Wt. (lbs)/Gal.: 9.10 Particle Charge: Anionic Particle Size (Microns): 0.25 Tg

(C):

+13

Crosslink: N/A Comments: Provides improved pick resistance, runnability. Markets: Paner 76 RES 3016: Solids (%): 55.0 Viscosity (cps): 2,100 pH: 3.0 Wt. (lbs)/Gal.: 9.00 Particle Charge: Nonionic Particle Size (Microns): 0.45 Tg

(C):

opacity and blade coating

+14

Crosslink: N/A Comments: Textile finishing. Trade sales paint. Markets: Paint

Water-Soluble

420

Resins

UNOCAL CHEMICALS DIVISION: Vinyl Acrylic(Continued): 76 RES 6110:

Solids (%): 50.0 Viscosity (cps): 600 pH: 6.0 Wt. (lbs)/Gal.: 9.10 Particle Charge: Anionic Particle Size (Microns): 0.15 Tg (C): +19 Crosslink: N/A Comments: Papercoating, superior rheology and strength properties. Markets: Paper 76 RES 6108: Solids (%): 50.0 Viscosity (cps): 500 pH: 6.0 Wt. (lbs)/Gal.: 9.10 Particle Charge: Anionic Particle Size (Microns): 0.15 Tg (C): +20 Crosslink: N/A Comments: Papercoating, good printing characteristics, high pick resistance. Markets: Paper 76 RES 6107: Solids (%): 50.0 Viscosity (cps): 275 pH: 6.0 wt. (lbs)/Gal.: 9.10 Particle.Charge: Nonionic Particle Size (Microns): 0.15 Tg

76

(C):

+24

Crosslink: N/A Comments: Papercoating. Heat sealable nonwoven binder. Markets: Paper RES 7800: Solids (%): 50.0 Viscosity (cps): 250

;Fi Y&)/Gal.: 9.00 Particle Charge: Anionic Particle Size (Microns): 0.2 Tg (C): +30 Crosslink: N/A Comments: Papercoating, low latex viscosity, ance. Markets: Paper

superior coating perform-


UNOCAL CHEMICALS DIVISION: Vinyl Acrylic(Continued): 76 RES 1170:

Solids (%): 45.0 Viscosity (cps): 200 pH: 4.0 Wt. (lbs)/Gal.: 9.00 Particle Charge: Anionic Particle Size (Microns): 0.35 Tg

(C):

+33

Crosslink: Self Comments: Nonwoven high loft binder for spray applications. Markets: Nonwovens 76 RES 2302: Solids (%): 46.0 Viscosity (cps): 100 pH: 4.0 Wt. (lbs)/Gal.: 9.00 Particle Charge: Anionic Particle Size (Microns): 0.35 Tg (C): +33 Crosslink: Self Comments: Fiberfill & high loft nonwoven binder for spray applications. Textile finishing. Markets: Nonwovens/Textiles 76 RES 2304: Solids (%): 46.0 Viscosity (cps): 200 pH: 4.0 Wt. (lbs)/Gal.: 9.00 Particle Charge: Anionic Particle Size (Microns): 0.35 Tg (C): +33 Crosslink: Self Comments: Fiberfill & high loft nonwoven binder, frothable. Textile finishing. Markets: Nonwovens/Textiles 76

RES

2306:

Solids (%): 45.0 Viscosity (cps): 200 pH: 4.0 Wt. (lbs)/Gal.: 9.10 Particle Charge: Anionic Particle Size (Microns): 0.35 Tg (C): +33 Crosslink: Self Comments: Fiberfill & hiqh loft nonwoven binder, frothable. Textile finishing. Markets: Nonwovens/Textiles

421

422


UNOCAL CHEMICALS DIVISION: Vinyl Acrylic(Continued): 76 RES 2307: Solids (%): 45.0 Viscosity (cps): 50 pH: 4.0 Wt. (lbs)/Gal.: 8.50 Particle Charge: Anionic Particle Size (Microns): 0.35 Tg (C): +33 Crosslink: Self Comments: Fiberfill & high loft nonwoven binder for spray applications. Textile finishing. Markets: Nonwovens/Textiles

R. T. Vanderbilt Co., Inc.

R.T. VANDERBILT

423

CO., INC.: RHODIGEL Xanthan Gum:

RHODIGEL is produced by a fermentation process using the natural plant organism Xanthomonas campestris. The resulting product is a water-soluble, anionic polysaccharide. Each repeating unit consists of a backbone of four B-D glucose units linked at the 1 and 4 positions. At the 3 position of alternating glucose units, are trisaccharide side chains consisting of an acetylated mannose unit, a glucuronic acid unit and either a mannose or pyruvic acid unit. The resulting stiff polymer chain may exist, in a solution, as a single, double or triple helix which interacts with other xanthan gum molecules to form complex, loosely bound networks held together by secondary valence forces. It is this network formation which produces many of the desirable benefits of using RHODIGEL Xanthan Gum. Grades and Typical Physical Properties: RHODIGEL Xanthan Gum is produced in two grades. RHODIGEL is the standard grade product and RHODIGEL 200 is a fine mesh, ground version of RHODIGEL. RHODIGEL: Appearance: Cream-White Powder Moisture Content, %: 12 max. pH (1.0 wt% Aqueous Solution): 6 to 8 Viscosity, ens: 1200-1600 Mesh Size; % thru 60 mesh: 100 % thru 80 mesh: 95 min. % thru 200 mesh: ---RHODIGEL 200: Appearance: Cream-White Powder Moisture Content, %: 12 max. pH (1.0 wt% Aqueous Solution): 6 to 8 Viscosity, cps: 1200-1600 Mesh Size: % thru 60 mesh: ---% thru 80 mesh: 100 % thru 200 mesh: 92 min. Performance Benefits: - High Efficiency Thickener - Dissolves Easily in Cold or Warm Water - Produces Highly-Pseudoplastic Solutions - Aqueous Solutions Have High Yield Values - Excellent Stabilizing Agent for Emulsions, Suspensions and Foams - Stable Viscosity Over a Broad PH Range - Little Viscosity Change With Temperature - Synergistic Rheological Performance with other Organic Gums and Inorganic-Suspending Agents - Compatible with Acids, Bases, Salts, and most Pharmaceutical and Cosmetic Ingredients Note: RHODIGEL is a Tradename of Rhone-Poulenc,

France

424


R.T. VANDERBILT Gum:

CO., INC.: RAODOPOL Industrial Grade Xanthan

Xanthan gum is the versatile polysaccharide thickener and stabilizer produced by fermentation and extraction of the naturally occuring plant bacteria Xanthomonas campestris. The resulting stiff chain may exist as a single, double or triple helix, which interacts with other polymer molecules to build a complex loosely bound network held together by secondary valence forces. The xanthan gum is about 2 X 10 6 molecular weight with a narrow molecular weight distribution compared to most polysaccharides. Intermolecular association among polymer chains results in the formation of a complex network of entangled rod like molecules. These weakly bound aggregates are progressively disrupted under the influence of applied shear: this explains the pronounced pseudoplasticity of xanthan gum solutions. In addition, this highly ordered network of entangled stiff molecules accounts for the high yield value of xanthan gum, which translates - in practical terms - to the effective suspending properties exhibited by the gum. RHODOPOL is an anionic polymer which is soluble in water but insoluble in most organic solvents. It performs a number of unique functions in water solutions because of its original molecular structure. Typical Specifications: __ Physical state: Powder Moisture content: 12% max. Bulk density (g/ml): 0.8 Mesh size (through 50 mesh): 98% pH: 6-8 RHODOPOL meets the needs for a highly effective viscosifier stabilizer, and suspending agent Unique properties even at low concentration: - Effective suspending agent - Viscosifier with pseudoplastic behaviour (shear-thinning) - Exceptional stability of rheolosical properties over a broad pH and temperature range - - Soluble and stable in wide range of salt concentration - Ability to be gelled and cross-linked Note: RHODOPOL

is a tradename of RHONE POULENC, France.

SUPPLIERS’

ADDRESSES

425

426


Abatron. Inc. 33 Center Drive Gilberts, IL 60136 (312)-426-2200/(800)-445-1754

CPS Chemical Co., Inc. P.O. Box 162 Old Bridge, NJ 08857 (201)-727-3100

Aceto Corp. One Hollow Lane Lake Success, NY 11042-1215 (516)-627-6000

Dock Resins Corp. 1512 West Elizabeth Ave. Linden, NJ 07036 (201)-862-2351

Air Products and Chemicals Box 538 Allentown, PA 18105 (215)-481-6799/(800)-345-3148

Dow Chemical U.S.A. Midland, MI 48674 (800)-258-2436

Alto Chemical 909 Mueller Drive P.O. Box 5401 Chattanooga, TN 37406 (615)-629-1405/(800)-251-1080 Aqualon Co. Little Falls Centre One 2711 Centerville Road P.O. Box 15417 Wilmington, DE 19850-5417 (302)-996-2000/(800)-345-8104 Bercen, Inc. 1381 Cranston St. Cranston, RI 02920-6789 (401)-943-7400/(800)-525-0595 Callaway Chemical Co. P.O. Box 2335 Columbus, GA 31993-3559 (404)-576-2000 Cargill, Inc. Box 5630 Minneapolis, MN 55440 (612)-475-6478 Cook Paint and Varnish Co. P.O. Box 419389 Kansas City, MO 64141-6389 (816)-391-8000

DuPont Polymer Products Dept. Wilmington, DE 19880 (302)-992-3475/(800)-441-7111 DynaGel, Inc. Wentworth Ave. and Plummer St. Calumet City, IL 60409 (708)-891-8400 Firestone Synthetic Rubber & Latex Co. P.O. Box 26611 Akron, OH 44319-0006 (216)-379-6538/(800)-282-0222 FMC Corp. Marine Colloids Div. 2000 Market St. Philadelphia, PA 19103 (215)-299-6000/(800)-526-3649 Freeman Chemical Corp. P.O. Box 996 217 Freeman Dr. Port Washington, WI 53074 (414)-284-5541/(800)-558-8658 Genesee Polymers Corp. 5251 Fenton Rd. P-0. Box 7047 Flint, MI 48057 (313)-238-4966

Suppliers’

B.F. Goodrich Co. 6100 Oak Tree Blvd. Cleveland, OH 44131 (216)-447-6000/(800)-528-0200 Goodvear Chemicals 1485-E. Archwood Ave. Akron, OH 44316 (216)-796-8812/(800)-321-2416 W.R. Grace & Co.-Conn. Organic Chemicals Div. Lexington, MA 02173 (617):861-6600 H & C Industries. Inc. 1311 Crenshaw Blvd. Torrance, CA 90501 (213)-328-3683

Henkel Polymers Div. 5325 South 9th Ave. LaGrange, IL 60525-3602 (312)-579-6150/(800)-237-4037 Hercules, Inc. Hercules Plaza Wilmington, DE 19894 (800)-247-4372 Hi-Tek Polymers Rhone-Poulenc Inc. 9808 Bluegrass Parkway Jeffersontown, KY 40299 (502)-499-4300/(800)-626-2613 Hoechst Celanese Corp. Route 202-206 P.O. Box 2500 Somerville, NJ 08876-1258 (201)-231-2268 Geo. A. Hormel & Co. P.O. Box 800 Austin, MN 55912 (507)-437-5608

Addresses

Huls America Inc. P.O. Box 456 80 Centennial Ave. Piscataway, NJ 08855-0456 (908)-980-6800/(800))-526-0339 ICI Resins US 730 Main St. Wilmington, MA 01887 (508)-658-6600/(800)-225-0947 Mobay Corp. Mobav Road Pittsburgh, PA 15205-9741 (412)-777-2000 Monsanto Chemical Co. 800 N. Lindbergh Blvd. St. Louis, MO 63167 (314)-694-1000/(800)-325-4330 Morton International, Inc. Specialty Chemicals Group P.O. Box 3089 Greenville, SC 29602 (803)-292-5700/(800)-962-3839 NL Chemicals, Inc. P.O. Box 700 Hightstown, NJ 08520 (609)-443-2500 Norland Products Inc. 695 Joyce Kilmer Ave. New Brunswick, NJ 08902 (201)-545-7828 Occidental Chemical Corp. PVC Resins and Compounds Armand Hammer Boulevard Box 699 Pottstown, PA 19464 C.J. Osborn P.O. Box 1310 Merchantville, NJ 08109 (609)-662-0128

427

428


OxyChem Durez Division 673 Walck Road North Tonawanda, NY 14120

Thibaut and Walk& P-0. Box 296 Newark, NJ 07101 (201)-589-3331

(716)-696-6000/(800)-828-2020

Polysat Inc. 7240 State Rd. Philadelphia, PA 19135 (215)-332-7700 Ranbar Technology, Inc. 1114 Wm. Flinn Hwv. Glenshaw, PA 15116-2638 (412)-486-1111 Reichhold Chemicals, Inc. P-0. Box 13582 Research Triangle Park, NC 27709

TIC Gums, Inc. 4609 Richlynn Drive Belcamp, MD 21017 (301)-273-7300/(800)-221-3953 Union Carbide Corn. 39 Old Ridgebury ba. Danbury, CT 06817-0001 (203)-js4-5300/(800)-342-3698 Unocal Chemicals Division 1345 N. Meacham Rd. Schaumburg, IL 60196 (800)-CHEMS~~

(919)-361-7500/(800)-431-1920

Sartomer Co. Marshall Bldg. West Chester Pike West Chester, PA 19382 (215)-430-2200/(800)-345-8247 StanChem, Inc. 401 Berlin St. East Berlin, CT 06023 (203)-828-0571

R.T. Vanderbilt Co., Inc. 30 Winfield St. Norwalk, CT 06855 (203)-853-1400

TRADE

NAME INDEX

430


Trade Name

Supplier

ABOKOTE AGEFLOC AGEQUAT AGESPERSE AG ESTAT AIRFLEX AIRVOL ALCOCLEAR ALKOX AQUA-HYDE AQUALON AQUATREAT AROLON AROLON

Abatron CPS Chemical CPS Chemical CPS Chemical CPS Chemical Air Products and Chemicals Air Products and Chemicals Alto Chemical H & C Industries Dock Resins Aqualon Alto Chemical NL Chemicals Reichhold Chemicals

BAYBOND BERSET

Mobay Bercen

CARBOSET CARGILL CELACOL CELLOSIZE CHEMIGUM CHEMPOL COROC COURLOSE CULMINAL

B.F. Goodrich Cargill Aceto (Courtaulds Acetate) Union Carbide Goodyear Chemicals Freeman Chemical Cook Paint and Varnish Aceto (Courtaulds Acetate) Aqualon

DARATAK DAREX DORESCO DRESINOL

W.R. Grace & Co. W.R. Grace & Co. Dock Resins Hercules

E LVANOL EPI-CURE EPI-REZ EPI-TEX EPOMIN EVERFLEX

DuPont Hi-Tek Polymers Hi-Tek Polymers Hi-Tek Polymers Aceto W.R. Grace & Co.

FLAVORSET FLEXBOND FLEXCRYL FURAL

Hormel Air Products and Chemicals Air Products and Chemicals Hercules

GAX G-CRYL GELCARIN GEON GOOD-RITE GOODYEAR

Henkel Henkel FMC B.F. Goodrich B.F. Goodrich Goodyear Chemicals

HALOFLEX HARTEX HERCOLYN HERCULES HIPURE HYCAR HYDROSIL HYSTRETCH

ICI Resins US Firestone Synthetic Rubber & Latex Hercules Hercules Norland Products B.F. Goodrich Huls America B.F. Goodrich

Trade Name Index

Trade Name

Supplier

IMPRANI L

Mobay

JAY F LOC

Callaway Chemical

KELSOL KLUCEL

Reichhold Chemicals Aqualon

LACTA R I N LYTRON

FMC Morton International

MARINE COLLOIDS METHOCEL MOBAY MOR-FL0

FMC Dow Chemical Mobay Morton International

NATROSOL NATROSOL NATROVIS NEOCRY L NEOREZ NEOTAC NUTRILOID

Aqualon Aqualon Aqualon ICI Resins US ICI Resins US ICI Resins US TIC Gums

PLUS

OXY

Occidental Chemical

PARC0 PARCRYL PEPTEIN PICCONOL PICCOPALE PICCOTAC PICCOTEX PICCOVAR PLIOCORD PLIOLITE PLIOWAY PLYOPHEN POLYOX POLYPRO POLYSAT PRIMACOR PRIMEKOTE PROTECTEIN

Thibaut and Walker Thibaut and Walker Hormel Hercules Hercules Hercules Hercules Hercules Goodyear Chemicals Goodyear Chemicals Goodyear Chemicals Oxychem Union Carbide Hormel Polysat Dow Chemical Co. Abatron Hormel

RES RESIMENE RHEOLATE RHODIGEL RHODOPOL

Unocal Chemicals Monsanto Chemical Reichhold Chemicals Rhone-Poulenc (R.T. Vanderbilt) Rhone-Poulenc (R.T. Vanderbilt)

SARTOMER SEAGE L SEAKEM SPENSOL STANCHEM STAYBELITE ESTER SUPER ALKYD SUPERCOL SUPER POLYESTER SUPER THANE

Sartomer FMC FMC Reichhold Chemicals StanChem Hercules Thibaut and Walker Aqualon Thibaut and Walker Thibaut and Walker

431

432


Trade Name

Supplier

TIC TICALOSE TICAXAN TY LOSE

TIC Gums TIC Gums TIC Gums Hoechst-Celanese

UNISIZE

Air Products and Chemicals

VANCRY L VARCUM VERSAFLEX VINAC VINEX VINSOL VISCARIN

Air Products and Chemicals Oxychem W.R. Grace & Co. Air Products and Chemicals Air Products and Chemicals Hercules FMC

WINGTACK WINGTACK WINGTACK

EXTRA PLUS

Goodyear Chemicals Goodyear Chemicals Goodyear Chemicals

RESIN INDEX

434


Resin

.*

Acrylamide Copolymers Acrylamide Polymers Acrylic Alkyd Copolymers Acrylic Dispersions Acrylic Emulsions Acrylic Emulsions Acrylic Emulsions Acrylic Latexes Acrylic Polymers Acrylic Resins Acrylic Resins Acrylic Resin Solution and Emulsions Acrylics Acrylics Adhesive Emulsions Alkyd Resins Alkyd Resins Alkyds Alkyds Alkyds Alkyds Alkyds-Non-oxidizing Alkyds-Oxidizing Amino Crosslinker Resins Anionic Polymers

Callaway Chemical Callaway Chemical Freeman Chemical Hi-Tek Polymers Air Products and Chemicals ICI Resins Thibaut and Walker B.F. Goodrich NL Chemicals Air Products and Chemicals Dock Resins Henkel Reichhold Chemicals Unocal Chemicals W.R. Grace & Co. Cook Paint and Varnish Ranbar Technology Freeman Chemical C.J. Osborn Thibaut and Walker Reichhold Chemicals Cargill Cargill Monsanto Chemical Alto Chemicals

Carboxylated Styrene Butadiene Carrageenan Cationic Polymers Cellulose Ethers Cellulose Ethers Cellulose Ethers Cellulose Gums Collagens Copolymer Latexes Copolymers Crosslinking Agents

Unocal Chemicals FMC Alto Chemical Aceto Aqualon Dow Chemical TIC Gums Hormel W.R. Grace Alto Chemical Bercen

DimethylaminefEpichlorohydrin Copolymers Dispersible Polymers

CPS Chemical Dow Chemical

Elastomeric Latexes Emulsion Copolymers Epoxy Coatings Epoxy Curing Agents Epoxy Resin Dispersions Epoxy Resins Epoxy Ester Emulsions Epoxy Esters Epoxy Esters Epoxy Esters Ethylene-Vinyl Chloride Emulsions

B.F. Goodrich Goodyear Chemicals Abatron Hi-Tek Polymers Hi-Tek Polymers Cook Paint and Varnish Hi-Tek Polymers Cargi II Freeman Chemical C.J. Osborn Air Products and Chemicals

Gelatin Gelatin Gelatin Guar Gum Guar Gum

Dynagel Hormel Norland Products Aqualon TIC Gums

Resin index

Resin

Supplier

Hydrocarbon Resin Emulsions Hydrocarbon Resin Emulsions Hydrocarbon Resins Hydroxyethylcellulose Hydroxyethylcellulose Hydroxyethylcellulose Hydroxypropyl Hydroxyethylcellulose

Hercules Polysat Goodyear Chemicals Aqualon Hoechst-Celanese Union Carbide Aqualon

Latex Concrete Coatings

Morton International

Methylhydroxyethyicellulose Monomers

Hoechst-Celanese Sartomer

Natural Latex Nitrile Latexes Nitrile Latexes

Firestone Synthetic Rubber & Latex B.F. Goodrich Goodyear Chemicals

Polyacrylic Acids Polyamide Resins Polyamines: Dimethyl Diallyl Ammonium Chloride Polyamine:Epichlorohydrin Polyamines:Melamine-Formaldehyde Polyesters Polyesters Polyesters Polyesters Polyesters Polyesters Polyethylene lmines Poly(ethylene oxide) Polymers Polyethylene Oxide Resin Polymer Emulsions Polymeric Aluminum Salts Polymeric Carboxylic Acids Polystyrene Latexes Polyurethane Dispersions Polyurethane Dispersions Polyvinyl Acetate Copolymer Emulsions Polyvinyl Acetate Homopolymer Emulsions Polyvinyl Alcohol Polyvinyl Alcohols Polyvinylidene Chlorides

Alto Chemical Henkel

Resin Dispersions Resins-Abrasive Rosin Emulsions

Hercules OxyChem Hercules

Silanes Silicone Resin Emulsions Sodium Carboxymethylcellulose Sodium Carboxymethylcellulose Sodium Polyacrylates Sodium Polymethacrylates Styrene-Acrylic Emulsions Styrene Acrylic Emulsions Styrene Acrylics Styrene/Butadiene Copolymer Latices Stvrene-Butadiene Latexes

Huls America Genesee Polymers Aqualon Hoechst-Celanese Alto Chemical Alto Chemical Air Products and Chemicals Reichhold Chemicals Unocal Chemicals Goodyear Chemicals B.F. Goodrich

Callaway Chemical Callaway Chemical Callaway Chemical Cargill Cook Paint and Varnish Freeman Chemical C.J. Osborn Reichhold Chemicals Thibaut and Walker Aceto Union Carbide H & C Industries Polysat CPS Chemical CPS Chemical Morton International ICI Resins Mobay Air Products and Chemicals Air Products and Chemicals Air Products and Chemicals DuPont Unocal Chemicals

435

436


Resin

..

Suspension Resins

Occidental Chemical

Textile Resin Latexes

Goodyear Chemicals

Urethanes Urethanes

Reichhold Chemicals Thibaut and Walker

Vinyl Acetate-Ethylene Copolymer Vinyl Acetate-Ethylene Emulsions Vinyl Acetate-Ethylene Powders Vinyl Acetate Homopolymers Vinyl Acrylic Copolymer Emulsions Vinyl Acrylic Emulsion Vinyl Acrylics Vinyl/Acrylic Terpolymers Vinyl Chloride-Ethylene Resins Vinyl Chloride Latexes Vinyl Pyridine Latexes Vinyl Pyridine Latexes

Air Products and Chemicals Air Products and Chemicals Air Products and Chemicals Unocal Chemicals Thibaut and Walker Air Products and Chemicals Unocal Chemicals ICI Resins Air Products and Chemicals B.F. Goodrich B.F. Goodrich Goodyear Chemicals

Water Reducible Acrylics

C.J. Osborn

Xanthan Gums Xanthan Gums

TIC Gums R.T. Vanderbilt

Water-Soluble Resins 2nd Edition An Industrial Guide

Epoxy Resins, Curing Agents, Compounds, and Modifiers: An Industrial Guide

Industrial Organic Chemicals, 2nd Edition

Emulsifying Agents: An Industrial Guide

Cosmetics Additives - An Industrial Guide

Plastics additives: an industrial guide

Industrial Organisation: Competition, Strategy, Policy, 2nd Edition

Handbook of Industrial Engineering, 2nd Edition

Industrial Relations: Theory and Practice, 2nd Edition

Hydrocarbon Resins

Texas Golf Guide, 2nd Edition

Swine Nutrition Guide 2nd Edition

Thermoset Resins

Textile finishing chemicals: an industrial guide

Bone Marrow Diagnosis: An Illustrated Guide 2nd Edition

Molecular Modeling and Simulation: An Interdisciplinary Guide (2nd edition)

Grammar Troublespots: An Editing Guide for Students, 2nd Edition

Biopharmaceuticals, an Industrial Perspective

Industrial Microbiology: An Introduction

An Invitation to Morse Theory, 2nd Edition

An Introduction to Optimization, 2nd Edition

Optics and Photonics: An Introduction, 2nd Edition

The Holocene: An Environmental History, 2nd Edition

Clinical Audiology: An Introduction, 2nd Edition

Nanotribology and Nanomechanics: An Introduction - 2nd Edition

Solid State Physics: An Introduction, 2nd Edition

An Introduction to Mechanics, 2nd edition

Elementary Calculus: An Infinitesimal Approach, 2nd Edition

Art Therapy: An Introduction, 2nd edition

Spectroscopy in Catalysis: An Introduction, 2nd Edition

Handbook of Thermoset Resins

Water-Soluble Resins 2nd Edition An Industrial Guide

Epoxy Resins, Curing Agents, Compounds, and Modifiers: An Industrial Guide

Industrial Organic Chemicals, 2nd Edition

Emulsifying Agents: An Industrial Guide

Cosmetics Additives - An Industrial Guide

Plastics additives: an industrial guide

Industrial Organisation: Competition, Strategy, Policy, 2nd Edition

Handbook of Industrial Engineering, 2nd Edition

Industrial Relations: Theory and Practice, 2nd Edition

Hydrocarbon Resins

Texas Golf Guide, 2nd Edition

Swine Nutrition Guide 2nd Edition

Thermoset Resins

Textile finishing chemicals: an industrial guide

Bone Marrow Diagnosis: An Illustrated Guide 2nd Edition

Molecular Modeling and Simulation: An Interdisciplinary Guide (2nd edition)

Grammar Troublespots: An Editing Guide for Students, 2nd Edition

Biopharmaceuticals, an Industrial Perspective

Industrial Microbiology: An Introduction

An Invitation to Morse Theory, 2nd Edition

An Introduction to Optimization, 2nd Edition

Optics and Photonics: An Introduction, 2nd Edition

The Holocene: An Environmental History, 2nd Edition

Clinical Audiology: An Introduction, 2nd Edition

Nanotribology and Nanomechanics: An Introduction - 2nd Edition

Solid State Physics: An Introduction, 2nd Edition

An Introduction to Mechanics, 2nd edition

Elementary Calculus: An Infinitesimal Approach, 2nd Edition

Art Therapy: An Introduction, 2nd edition

Spectroscopy in Catalysis: An Introduction, 2nd Edition

Handbook of Thermoset Resins

Recommend Documents