PLASTICS ADDITIVES AN INDUSTRIAL GUIDE Third Edition Volume III
by
Ernest W. Flick
np
NOYES PUBLICATIONS WILLIAM AND...
206 downloads
2636 Views
1MB Size
Report
This content was uploaded by our users and we assume good faith they have the permission to share this book. If you own the copyright to this book and it is wrongfully on our website, we offer a simple DMCA procedure to remove your content from our site. Start by pressing the button below!
Report copyright / DMCA form
PLASTICS ADDITIVES AN INDUSTRIAL GUIDE Third Edition Volume III
by
Ernest W. Flick
np
NOYES PUBLICATIONS WILLIAM ANDREW PUBLISHING Norwich, New York, U.S.A.
Copyright © 2002 by William Andrew Publishing No part of this book may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage and retrieval system, without permission in writing from the Publisher. Library of Congress Catalog Card Number: 2001088672 ISBN: O-8155-1470-0 Printed in the United States Published in the United States of America by Noyes Publications / William Andrew Publishing 13 Eaton Avenue Norwich, New York, 13815. 1-800-932-7045 www.williamandrew.com www.knovel.com
10 9 8 7 6 5 4 3 2 1
Library of Congress Cataloging-in-Publication Data Flick, Ernest W. Plastics additives: an industrial guide / by Ernest W. Flick. -3rd ed. p. cm. Includes index. ISBN O-8155-1470-0 1. Plastics--Additives. I. Title. TPl142.F58 2002 668.4’11 --dc20 00-108117 CIP ISBN: 0-8155-1464-6 (V.1) ISBN: 0-8155-1472-7 (V.2) ISBN: 0-8155-1470-0 (V.3)
NOTICE To the best of our knowledge the information in this publication is accurate; however, the Publisher does not assume any responsibility for the accuracy or completeness of, or consequences arising from, such information. This industrial guide does not purport to contain detailed user instructions, and by its range and scope could not possibly do so. Mention of trade names or commercial products does not constitute endorsement or recommendation for use by the Publisher. In some cases plastics additives could be toxic, and therefore due caution should be exercised. Final determination of the suitability of any information or product for use contemplated by any user, and the manner of that use, is the sole responsibility of the user. We strongly recommend that users seek and adhere to a manufacturers or suppliers current instructions for handling each material they use. The Author and Publisher have used their best efforts to include only the most recent data available. The reader is cautioned to consult the supplier in case of questions regarding current availability.
To Wil and Marilyn
Preface
The Third Edition of this useful book is divided into three volumes. Volume II describes almost 1,400 plastics additives which are currently available to industry. It is the result of information received from 74 industrial companies and other organizations. The data represents selections from manufacturers descriptions made at no cost to, nor influence from, the makers or distributors of these materials. Only the most recent information has been included. It is believed that all of the products listed here are currently available, which will be of utmost interest to readers concerned with product discontinuances. Plastics additives, a complex and growing group of minerals and chemical derivatives, account for 15 to 20% by weight of the total volume of plastic products marketed. They are produced by a large number of companies for a wide variety of customers and needs. Growth of the use of these additives, which impart one or more desirable properties to resins, is relatively strong, about 3.5 to 4% per year. Environmental constraints, however, have imposed rigorous performance requirements on many products, thus placing added expenses on the development costs of these materials. Plastics additives are divided into logical sections in three volumes. Volume I: I. Adhesion Promoters II. Anti-Fogging Agents
LEE
viii 2HAB=?A III. Antioxidants IV. Anti-Static Agents V. Antibacterials/Fungicides/Mildewcides VI. Bonding, Blowing and Foaming Agents VII. Dispersants VIII. Fillers and Extenders IX. Fire and Flame Retardants/Smoke Suppressants Volume II: X. Impact Modifiers XI. Initiators XII. Lubricants XIII. Micas XIV. Pigments, Colorants, and Dyes XV. Plasticizers and Esters XVI. Processing Aids XVII. Release Agents XVIII. Silanes, Titanates, and Zirconates XIX. Slip and Anti-Blocking Agents Volume III: XX. Stabilizers XXI. Stearates XXII. UV Absorbers XXIII. Viscosity Regulators XXIV. Waxes XXV. Miscellaneous and Multipurpose Compounds The Table of Contents of each volume is organized to also serve as a subject index. Each raw material is located in the section which is most applicable. The reader seeking a specific raw material should check each section which could possibly apply. In addition to the
JMR- 19-Mar-01
2HAB=?Aix above, two further sections are included in each volume: a list of Suppliers Addresses and a Trade Name Index. These will be extremely helpful to the reader. The following information is supplied for each product, as available, in the manufacturers own words: Company name and product category. Trade names and product numbers. Product description: a description of the products main features, as described by the supplier. The three volumes of this book will be of value to technical and managerial personnel involved in the preparation of products made with these plastics additives as well as to the suppliers of the basic raw materials. My fullest appreciation is expressed to the companies and organizations who supplied the data included in this book. March, 2001
Ernest W. Flick
JMR
19-Mar-01
Contents and Subject Index SECTION XX: STABILIZERS Akcros Chemicals America: ...................................................................................... 2 Additives for Rigid PVC Applications .................................................................2 Stabilizers for Flexible Vinyl .................................................................................5 AKCROS’ ABC Line-Foam Stabilizer/Activators .....................................5 Calcium Zinc Based Stabilizers .....................................................................6 Chelators and Auxiliaries ................................................................................7 Metal Soap Based Stabilizers .........................................................................8 Baerlocher U.S.A.: ......................................................................................................10 BAEROSTAB Organotin Stabilizers: ................................................................10 Organotin Carboxylates .................................................................................10 Organotin Mercaptides...................................................................................12 Organotin Mercaptide/Carboxylates............................................................17 Lead Stabilizers ..................................................................................................... 19 Lead Commodities..........................................................................................19 Characteristics of Commodity Modifications............................................20 Ciba Specialty Chemicals: ........................................................................................24 Additives for Polyolefins:.....................................................................................24 Antioxidants (AO) & Processing Stabilizers .............................................24 Antioxidants (AO) & Processing Stabilizer Blends..................................27 Hindered Amine Light Stabilizers (HALS)................................................29 Phenol-Free Stabilizers ..................................................................................31 Products for Recycling...................................................................................32 Light Stabilizers for Polyolefins ..........................................................................33 Light Stabilizer Systems ........................................................................................35 Fairmount Chemical Co., Inc ...................................................................................36 MIXXIM CD-12 Metal Deactivator....................................................................36 Ferro Corp.....................................................................................................................37 FERRO UV-CHEK Light Stabilizers for Polymers .........................................37 THERM-CHEK Heat Stabilizers .........................................................................40 Halstab............................................................................................................................48 Non-Lead Stabilizers..............................................................................................48 Powdered Lead Stabilizers ....................................................................................50 Rhein Chemie Corp. ....................................................................................................53 xi
xii
Contents
STABAXOL Antihydrolysis Agents...................................................................53 Product Selection and Market Overview Guide ........................................53 Rohm and Haas Co/Morton International ...........................................................58 Product Application Overview.............................................................................58 3V Inc..............................................................................................................................62 Antioxidants: ALVINOX/ ALVIPACK .............................................................62
SECTION XXI: STEARATES Baerlocher U.S.A. ........................................................................................................64 Aluminum Soaps.....................................................................................................64 Calcium Soaps.........................................................................................................65 Magnesium Soaps...................................................................................................66 Zinc Soaps................................................................................................................67 H.L. Blachford Ltd......................................................................................................69 Metallic Stearates....................................................................................................69 Metallic Soaps and Stabilizers..............................................................................72 Ferro Corp.....................................................................................................................73 Metallic Stearates....................................................................................................73
SECTION XXII: UV ABSORBERS Ciba Specialty Chemicals ..........................................................................................78 Additives for Polyolefins.......................................................................................78 UV Absorbers (UVA)....................................................................................78 Cytec Industries Inc. ...................................................................................................79 CYASORB UV Absorbers and Light Stabilizers..............................................79 Everlight USA Inc. ......................................................................................................82 EVERSORB 71 UV Absorber..............................................................................82 EVERSORB 73 UV Absorber..............................................................................83 EVERSORB 74 UV Absorber..............................................................................84 EVERSORB 75 UV Absorber..............................................................................85 EVERSORB 90 UV Stabilizer for Polymers .....................................................86 EVERSORB 91 Light Stabilizer for Polymers ..................................................87 Fairmount Chemical Co. Inc. ...................................................................................88 MIXXIM BB/100 UV Light Absorber...............................................................88 MIXXIM BB/200 UV Light Absorber...............................................................89
Contents
xiii
MIXXIM PB-30 UV Stabilizer ............................................................................90 Great Lakes Chemical Corp.....................................................................................91 Ultraviolet Stabilizers.............................................................................................91 Harwick Standard Distribution Corp....................................................................93 STANLIGHT UV Absorbers................................................................................93 3V Inc..............................................................................................................................94 UVASORB Light Stabilizers ................................................................................94 Hindered Amine Light Stabilizers (HALS)................................................94 U.V. Absorbers................................................................................................96
SECTION XXIII: VISCOSITY REGULATORS Degussa...........................................................................................................................98 AEROSIL for PVC Plastisols ...............................................................................98
SECTION XXIV: WAXES CasChem, Inc..............................................................................................................100 PARICIN 220 Fatty Acid Amide...................................................................... 100 Ferro Corp...................................................................................................................101 PETRAC Waxes, Wax Blends, and GMS....................................................... 101 Genesee Polymers Corp. ..........................................................................................102 Silicone Waxes ..................................................................................................... 102 Frank B. Ross Co., Inc.: ...........................................................................................104 Microcrystalline Wax.......................................................................................... 104 Montan Wax ......................................................................................................... 105 ROSS Wax #100: Fischer-Tropsch Wax......................................................... 106 ROSS Wax No. 130, No. 145, No. 165 ........................................................... 107 Ross Wax 140: Synthetic High Melting Point Wax: Powdered ................. 108 Ross Wax 160: Synthetic High Melting Point Wax: Powdered .................. 109
SECTION XXV: MISCELLANEOUS & MULTIPURPOSE COMPOUNDS Claude Bamberger Molding Compounds Corp. ...............................................111 BAMBERKO ULTIMAX Purging Compound.............................................. 111
xiv
Contents
Buckman Laboratories, Inc. ...................................................................................112 Successful Applications of BUSAN 11-M1 in Plastic and Rubber Compounds ........................................................................................................... 112 BYK-Chemie USA.....................................................................................................113 Air Release Additives for PVC Plastisols ..................................................... 113 Air Release Additives for Ambient Cure Polyester Resins.......................... 114 Air Release Additive/Agents ............................................................................. 115 Chemax, Inc. ...............................................................................................................116 CHEMSTAT Compounds.................................................................................. 116 Danisco Cultor USA, Inc. ........................................................................................119 Products and Applications.................................................................................. 119 Recommended Glycerol Ester Based Additives for Polyolefins................. 121 Dyneon..........................................................................................................................123 DYNAMAR Polymer Processing Additives................................................... 123 Paratherm Corp.........................................................................................................124 PARATHERM NF Heat Transfer Fluid .......................................................... 124 Rhein Chemie Corp. ..................................................................................................125 Product Selection and Market Overview Guide for Catalysts ..................... 125 Product Selection and Market Overview Guide for Combustion Modifiers ......................................................................................................................127 Product Selection and Market Overview Guide for Crosslinkers/Curatives ........................................................................................128 Product Selection and Market Overview Guide for Dispersants/Stabilizers ........................................................................................129 Product Selection and Market Overview Guide for Flushing Agents ........ 130 Product Selection and Market Overview Guide for Silicone Surfactants.. 132 Miscellaneous Products ...................................................................................... 133 Specialty Products Co...............................................................................................134 STYRID Styrene Suppressant Additive........................................................... 134 Stepan Co. ....................................................................................................................135 DREWPLAST 051 .............................................................................................. 135 DREWPLAST 154 DEA Alkanolamide.......................................................... 136 UOP ...............................................................................................................................137 UNILI NK,Diamines ............................................................................................ 137 UNILINK 4200 Diamine.................................................................................... 139 TRADE NAME INDEX ...........................................................................................140 SUPPLIERS’ ADDRESS.........................................................................................143
Stabilizers 1
Section XX Stabilizers
2
Plastics Additives
Akcros Chemicals America: Additives for Rigid PVC Applications: General Purpose Stabilizers: T-4654: Weather Ability: Excellent Color Hold, Term Stability, Clarity, Flexible PVC, Plastisols: Recommended Odor, Lubricity: Good
T-4791: Color Hold, Rigid Foam: Excellent Term Stability: Recommended Clarity, Weather Ability, Flexible PVC, Odor, Lubricity, Plastisols: Good
T-4905: Term Stability, Clarity, Weather Ability, Flexible PVC: Excellent Odor: Recommended Color Hold, Lubricity, Plastisols: Good
T-5003: Color Hold, Term Stability, Weather Ability, Lubricity: Excellent Clarity, Flexible PVC, Odor: Good
T-5005: Odor, Lubricity, Rigid Foam: Excellent Color Hold, Term Stability, Clarity, Weather Ability, Flexible PVC: Good
T-5007: Color Hold, Lubricity: Excellent Term Stability, Weather Ability: Recommended Clarity, Flexible PVC, Odor: Good
T-5063: Color Hold, Term Stability, Clarity, Weather Ability, Odor: Excellent Flexible PVC: Recommended Lubricity, Plastisols: Good
T-5095: Color Hold, Clarity, Odor: Excellent Term Stability, Weather Ability, Flexible PVC: Recommended Lubricity: Good
T-5160: Color Hold, Term Stability, Weather Ability, Lubricity: Excellent Odor: Good
Stabilizers 3
Akcros Chemicals America: Additives for Rigid PVC Applications (Continued): General Purpose Stabilizers (Continued): T-5172: Color Hold, Term Stability, Weather Ability: Excellent Lubricity: Recommended Odor: Good
T-5178: Color Hold, Term Stability, Weather Ability, Lubricity: Excellent Odor: Good
T-7020: Color Hold, Clarity, Weather Ability, Odor: Excellent Term Stability, Lubricity: Recommended
Food Grade Applications: T-883: Color Hold, Term Stability, Clarity, Weather Ability, Odor: Excellent Lubricity: Recommended
T-885: Color Hold, Term Stability, Clarity, Weather Ability, Odor: Excellent Lubricity: Recommended
T-7021: Color Hold, Term Stability, Clarity, Weather Ability, Odor: Excellent Lubricity: Recommended
4
Plastics Additives
Akcros Chemicals America: Additives for Rigid PVC Applications (Continued): Specialty Applications: T-186: Term Stability, Weather Ability, Flexible PVC, Plastisols: Excellent Color Hold, Clarity, Odor: Recommended Lubricity: Good
T-876: Weather Ability, Flexible PVC, Plastisols: Excellent Color Hold, Term Stability, Clarity, Odor: Recommended Lubricity: Good
T-876A: Weather Ability, Flexible PVC, Plastisols: Excellent Color Hold, Term Stability, Clarity, Odor: Recommended Lubricity: Good
T-878M: Color Hold, Clarity, Weather Ability, Flexible PVC, Plastisols: Excellent Term Stability, Odor: Recommended Lubricity: Good
T-5507A: Weather Ability: Excellent Color Hold, Term Stability, Clarity, Flexible PVC, Odor, Lubricity, Plastisols: Recommended
TL: Lubricity, Plastisols: Excellent Color Hold, Term Stability, Clarity, Weather Ability, Flexible PVC, Odor: Recommended
Stabilizers 5
Akcros Chemicals America: Stabilizers for Flexible Vinyl: AKCROS’ ABC Line-Foam Stabilizer/Activators: Akcros stabilizer/activators have been formulated to provide controlled, uniform gas evolution for the production of PVC foams utilizing azodicarbonamide as the blowing agent. The ABC series of blowing agent catalysts are primary materials and act as both heat stabilizers and gas generation activators. No secondary stabilizer is normally required. Thus, with the availability of such blowing agent catalysts, the use range of azodicarbonamide is extended to a significant degree.
ABC-1: Decomposition Range: 340 to 360F Activity Rate: High
ABC-2: Decomposition Range: 330 to 350F Activity Rate: High
ABC-6*: Decomposition Range: 390 to 400F Activity Rate: Low
ABC-7: Decomposition Range: 390 to 410F Activity Rate: Low
ABC-18: Decomposition Range: 340 to 360F Activity Rate: Medium
ABC-4810: Decomposition Range: 330 to 350F Activity Rate: High · ·
*Note: ABC-6 functions as a stabilizer/de-activator resulting in a controlled blow with very fine cell structure.
6
Plastics Additives
Akcros Chemicals America: Stabilizers for Flexible Vinyl: Calcium Zinc Based Stabilizers: General Purpose: LT-2001M: Heat Stability, Printability, Plastisol: Excellent Lubricity, Clarity, Extrusion/Inj.Mldg., Calendering: Good
LT-4468: Plastisol: Excellent Printability: Recommended Heat Stability, Clarity: Good
CAZ-4842: Heat Stability, Plastisol: Excellent Clarity: Good
CAZ-4949: Heat Stability: Excellent Lubricity, Low-odor/Volatility, Extrusion/Inj.Mldg., Calendering: Recommended
Food Contact: CZ-11D: Foam Activation, Extrusion/Inj.Mldg., Calendering, Plastisol: Recommended Heat Stability, Lubricity, Clarity: Good
CZ-19A: Heat Stability, Lubricity, Foam Activation, Extrusion/Inj.Mldg., Calendering: Recommended Clarity: Good
CZL-717: Clarity, Plastisol: Excellent Heat Stability, Low Plateout, Printability: Recommended Foam Activation, Calendering: Good
CZL-720: Clarity, Plastisol: Excellent Printability: Recommended Heat Stability, Low Plateout, Foam Activation: Good
CZL-720A: Clarity, Plastisol: Excellent Heat Stability, Printability: Recommended Low Plateout, Foam Activation, Extrusion/Inj.Mldg., Calendering: Good
Stabilizers 7
Akros Chemicals America: Stabilizers for Flexible Vinyl: Chelators and Auxiliaries:
CH-55 (FDA): Printability, Extrusion/Inj.Mldg., Calendering, Plastisol: Recommended Heat Stability, Clarity: Good
CH-301: Printability: Excellent Heat Stability, Extrusion/Inj.Mldg., Calendering: Recommended Clarity, Plastisol: Good
P-2307*: Heat Stability, Clarity, Extrusion/Inj.Mldg., Calendering, Plastisol: Recommended Low-odor/Volatility, Printability: Good
SA-5038: Printability: Excellent Heat Stability, Foam Activation, Extrusion/Inj.Mldg., Calendering: Recommended
Ca Stearate: Heat Stability, Lubricity: Excellent Low-odor/Volatility, Extrusion/Inj.Mldg., Calendering: Recommended Printability: Good
Zn Stearate: Lubricity: Excellent Low-odor/Volatility, Foam Activation, Extrusion/Inj.Mldg., Calendering: Recommended Heat Stability, Clarity, Printability: Good *Note: PLASTOFLEX 2307 is a high-quality epoxidized soy bean oil with a minimum oxirane content of 6.8%.
8
Plastics Additives
Akcros Chemicals America: Stabilizers for Flexible Vinyl: Metal Soap Based Stabilizers: Barium Cadmium Based Stabilizers: BC-103A: Heat Stability, Clarity, Foam Activation, Extrusion/Inj. Mldg., Calendering, Plastisol: Recommended Printability: Good
BC-103L: Heat Stability, Extrusion/Inj. Mldg., Calendering: Recommended Lubricity, Clarity, Printability, Plastisol: Good
BC-111: Extrusion/Inj.Mldg., Calendering: Recommended Heat Stability, Clarity, Printability, Plastisol: Good
BC-4746S: Heat Stability, Printability, Extrusion/Inj. Mldg., Calendering: Excellent Lubricity, Clarity, Low Plateout: Recommended Low-odor/Volatility: Good
BC-4962: Heat Stability, Lubricity, Extrusion/Inj. Mldg., Calendering: Excellent
Barium Zinc Based Stabilizers: LT-4797: Heat Stability, Low Plateout, Printability: Recommended Clarity, Low Fog, Extrusion/Inj.Mldg., Calendering, Plastisol: Good
LT-4798: Heat Stability, Clarity, Low Plateout, Extrusion/Inj.Mldg., Plastisol: Recommended Lubricity, Foam Activation, Calendering: Good
LT-4813: Heat Stability, Low Plateout, Printability, Calendering: Excellent Lubricity, Clarity, Foam Activation, Extrusion/Inj. Mldg.: Recommended
BZ-4903M: Heat Stability, Extrusion/Inj. Mldg., Calendering: Recommended Lubricity, Clarity: Good
BZ-4929: Heat Stability, Foam Activation: Excellent Extrusion/Inj.Mldg., Calendering: Recommended Printability: Good
Stabilizers 9
Akcros Chemicals America: Stabilizers for Flexible Vinyl: Metal Soap Based Stabilizers (Continued): Barium Zinc Based Stabilizers (Continued): BZ-4946: Clarity: Excellent Heat Stability, Low Plateout, Printability, Extrusion/Inj. Mldg., Calendering: Recommended Lubricity: Good
BZ-4951: Heat Stability, Lubricity, Calendering: Excellent Low-odor/Volatility, Extrusion/Inj. Mldg.: Recommended
BZ-4975: Low-odor/Volatility: Excellent Heat Stability, Extrusion/Inj.Mldg.: Recommended Lubricity, Clarity: Good
BZ-4996: Clarity: Excellent Heat Stability, Extrusion/Inj.Mldg., Calendering: Recommended Lubricity, Low Plateout: Good
BZ-5023: Low-odor/Volatility, Low Fog: Excellent Heat Stability, Extrusion/Inj.Mldg.: Recommended Low Plateout: Good
BZ-5043: Heat Stability, Clarity, Extrusion/Inj.Mldg., Calendering: Excellent Low Plateout, Printability: Excellent Lubricity: Good
BZ-5046: Low Fog: Excellent Heat Stability, Extrusion/Inj.Mldg., Calendering: Recommended
BZ-4922: Heat Stability, Lubricity, Low-odor/Volatiliy: Excellent Low Fog, Foam Activation: Recommended
Barium Zinc ESO Blends: LT-4801: Plastisol: Recommended Heat Stability, Clarity, Printability, Extrusion/Inj.Mldg., Calendering: Good
LT-4803: Heat Stability, Clarity, Extrusion/Inj.Mldg., Calendering, Plastisol: Recommended Printability, Foam Activation: Good
BZ-4864: Printability, Calendering: Recommended Heat Stability, Clarity, Low Plateout, Extrusion/Inj.Mldg.: Good
10
Plastics Additives
Baerlocher U.S.A.: BAEROSTAB Organotin Stabilizers: Organotin Carboxylates:
Butyl: DBTL/C: Fields: Plastisol Properties: Transparent, Weather resistant, Low odor, Phenol-free, Limited self-lubrication, Very good initial color, Stabilizing E-PVC Viscosity at 20C (mPa.s): 70 Color Gardner (max.): 3 Density at 20C (g/cm3): 1.05
M 15: Fields: Plastisol Properties: Transparent, Weather resistant, Low odor, Phenol-free, Limited self-lubrication, Very good initial color, Stabilizing E-PVC Viscosity at 20C (mPa.s): 130 Color Gardner (max.): 2 Density at 20C (g/cm3): 1.08
MS: Fields: Extrusion, Blown Films, Rigid PVC: Technical, Semi-rigid PVC, Flexible PVC Properties: Transparent, Weather resistant, Low odor, Phenol-free, No self-lubrication, Very good initial color, Low fogging, Stabilizing E-PVC, High Vicat temperature Powder Color Gardner (max.): White Density at 20C (g/cm3): 1.50
MSL: Fields: Extrusion, Rigid PVC: Technical Properties: Transparent, Weather resistant, Low odor, Phenol-free, No self-lubrication, Very good initial color, Stabilizing E-PVC Viscosity at 20C (mPa.s): 800 Color Gardner (max.): 2 Density at 20C (g/cm3): 1.34
Stabilizers 11
Baerlocher U.S.A.: BAEROSTAB Organotin Stabilizers: Organotin Carboxylates (Continued): Butyl (Continued): MSQ/N: Fields: Extrusion, Blown Films, Rigid PVC: Technical, Semi-rigid PVC Properties: Transparent, Weather resistant, Low odor, Phenol-free, No self-lubrication, Very good initial color, Stabilizing E-PVC Viscosity at 20C (mPa.s): 400 Color Gardner (max.): 2 Density at 20C (g/cm3): 1.22
MST: Fields: Plastisol Properties: Transparent, Weather resistant, Low odor, Phenol-free, No self-lubrication, Very good initial color, Stabilizing E-PVC Viscosity at 20C (mPa.s): 300 Color Gardner (max.): 2 Density at 20C (g/cm3): 1.15
Octyl: MSO: Fields: Blown Films, Rigid PVC: Nontox Properties: Transparent, Weather resistant, Low odor, Phenol-free, No self-lubrication, Very good initial color, Low fogging, High Vicat temperature Powder Color Gardner (max.): White Density at 20C (g/cm3): 1.23
MSO/L: Fields: Blown Films, Rigid PVC: Nontox Properties: Transparent, Weather resistant, Low odor, Phenol-free, No self-lubrication, Very good initial color Viscosity at 20C (mPa.s): 300 Color Gardner (max.): 2 Density at 20C (g/cm3): 1.18
12
Plastics Additives
Baerlocher U.S.A.: BAEROSTAB Organotin Stabilizers: Organotin Mercaptides: Butyl: M21-50 Fields: Extrusion, Blown Films, Injection/Blow Molding, Flexible PVC, Plastisol Properties: Transparent, Low odor, No self-lubrication, Very good initial color, Very good color hold Viscosity at 20C (mPa.s): 50 Color Gardner (max.): 2 Density at 20C (g/cm3): 0.99
M-25: Fields: Calendering, Extrusion, Blown Films, Injection/Blow Molding, Rigid PVC: Technical, Semi-rigid PVC, Flexible PVC Properties: Transparent, Phenol-free, No self-lubrication, Very good initial color, Very good color hold, Very good long term stability, Stabilizing E-PVC Viscosity at 20C (mPa.s): 90 Color Gardner (max.): 2 Density at 20C (g/cm3): 1.13
M 25 S: Fields: Calendering, Extrusion, Blown Films, Injection/Blow Molding, Rigid PVC: Technical: Semi-rigid PVC, Flexible PVC, Plastisol Properties: Transparent, Low odor, Phenol-free, No self-lubrication, Very good initial color, Very good color hold, Very good long term stability, Low fogging, Stabilizing E-PVC Viscosity at 20C (mPa.s): 90 Color Gardner (max.): 2 Density at 20C (g/cm3): 1.13
M 25-85: Fields: Calendering, Extrusion, Rigid PVC: Technical, Semi-rigid PVC Properties: Transparent, Phenol-free, Limited self-lubrication, Very good initial color, Very good color hold Viscosity at 20C (mPa.s): 80 Color Gardner (max.): 2 Density at 20C (g/cm3): 1.08
Stabilizers 13
Baerlocher U.S.A.: BAEROSTAB Organotin Stabilizers: Organotin Mercaptides (Continued): Butyl (Continued): M 26 SF: Fields: Calendering, Extrusion, Rigid PVC: Technical, Semi-rigid PVC Properties: Transparent, Phenol-free, No self-lubrication, Very good initial color, Very good color hold, Very good long term stability Viscosity at 20C (mPa.s): 100 Color Gardner (Max.): 2 Density at 20C (g/cm3): 1.14
M 170: Fields: Calendering, Extrusion, Blown Films, Injection/Blow Molding, Rigid PVC: Technical, Semi-rigid PVC, Flexible PVC Properties: Transparent, Phenol-free, Limited self-lubrication, Very good initial color, Very good color hold, Very good long term stability, Stabilizing E-PVC Viscosity at 20C (mPa.s): 80 Color Gardner (Max.): 2 Density at 20C (g/cm3): 1.10
M-260: Fields: Plastisol Properties: Transparent, No self-lubrication, Very good initial color, (Very good color hold, Stabilizing E-PVC) Viscosity at 20C (mPa.s): 250 Color Gardner (Max.): 2 Density at 20C (g/cm3): 1.12
M 69: Fields: Semi-rigid PVC, Flexible PVC, Plastisol Properties: Transparent, Phenol-free, No self-lubrication, Very good initial color, Very good color hold, Stabilizing E-PVC Viscosity at 20C (mPa.s): 150 Color Gardner (max.): 2 Density at 20C (g/cm3): 1.06
M 69 S: Fields: Semi-rigid PVC, Flexible PVC, Plastisol Properties: Transparent, Low odor, Phenol-free, No-self lubrication, Very good initial color, Very good color hold, Stabilizing E-PVC Viscosity at 20C (mPa.s): 150 Color Gardner (max.): 2 Density at 20C (g/cm3): 1.06
14
Plastics Additives
Baerlocher U.S.A.: BAEROSTAB Organotin Stabilizers: Organotin Mercaptides (Continued): Butyl (Continued): M 70: Fields: Calendering, Extrusion, Blown Films, Flexible PVC, Plastisol Properties: Transparent, Phenol-free, No self-lubrication, Very good initial color, Very good color hold, Stabilizing E-PVC Viscosity at 20C (mPa.s): 100 Color Gardner (max.): 2 Density at 20C (g/cm3): 1.01
M 71: Fields: Extrusion, Injection Blow Molding, Rigid PVC: Technical, Semi-rigid PVC Properties: Transparent, Limited self-lubrication, Very good initial color, Very good color hold Viscosity at 20C (mPa.s): 100 Color Gardner (max.): 2 Density at 20C (g/cm3): 1.10
X-AB 7: Fields: Calendering, Blown Films, Rigid PVC: Technical, Semi-rigid PVC, Flexible PVC Properties: Transparent, Phenol free, Limited self-lubrication, Very good initial color, Very good color hold, Very good long term stability Viscosity at 20C (mPa.s): 110 Color Gardner (max.): 2 Density at 20C (g/cm3): 1.12
Stabilizers 15
Baerlocher U.S.A.: BAEROSTAB Organotin Stabilizers: Organotin Mercaptides (Continued): Octyl: OM 510 S: Fields: Calendering, Extrusion, Blown Films, Injection/Blow Molding, Rigid PVC: Nontox, Properties: Transparent, Low odor, Phenol-free, No self-lubrication, Very good initial color, Very good color hold, Very good long term stability, Stabilizing E-PVC Viscosity at 20C (mPa.s): 150 Color Gardner (max.): 2 Density at 20C (g/cm3): 1.11
OM 700: Fields: Calendering, Extrusion, Blown Films, Injection/Blow Molding, Rigid PVC: Nontox Properties: Transparent, Phenol-free, No self-lubrication, Very good initial color, Very good color hold, Very good long term stability, Stabilizing E-PVC Viscosity at 20C (mPa.s): 110 Color Gardner (max.): 2 Density at 20C (g/cm3): 1.10
OM 700 S: Fields: Calendering, Extrusion, Blown Films, Injection/Blow Molding, Rigid PVC: Nontox Properties: Transparent, Low odor, Phenol-free, No self-lubrication, Very good initial color, Very good color hold, Very good long term stability, Stabilizing E-PVC Viscosity at 20C (mPa.s): 110 Color Gardner (max.): 2 Density at 20C (g/cm3): 1.10
OM 710: Fields: Calendering, Extrusion, Blown Films, Injection/Blow Molding, Rigid PVC: Nontox Properties: Transparent, Phenol-free, No self-lubrication, Very good initial color, Very good color hold, Very good long stability, Stabilizing E-PVC Viscosity at 20C (mPa.s): 130 Color Gardner (max.): 2 Density at 20C (g/cm3): 1.11
16
Plastics Additives
Baerlocher U.S.A.: BAEROSTAB Organotin Stabilizers: Organotin Mercaptides (Continued): Octyl (Continued): OM 710 D: Fields: Calendering, Extrusion, Blown Films, Injection/Blow Molding, Rigid PVC: Nontox Properties: Transparent, Phenol-free, No self-lubrication, Very good initial color, Very good color hold, Very good long term stability, Stabilizing E-PVC Viscosity at 20C (MPa.s): 120 Color Gardner (Max.): 2 Density at 20C (g/cm3): 1.10
OM 710 N: Fields: Calendering, Extrusion, Blown Films, Injection/Blow Molding, Rigid PVC: Nontox Properties: Transparent, Phenol-free, No self-lubrication, Very good initial color, Very good color hold, Very good long term stability, Stabilizing E-PVC Viscosity at 20C (mPa.s): 130 Color Gardner (max.): 2 Density at 20C (g/cm3): 1.09
OM 710 S: Fields: Calendering, Extrusion, Blown Films, Injection/Blow Molding, Rigid PVC: Nontox Properties: Transparent, Low odor, Phenol-free, No self-lubrication, Very good initial color, Very good color hold, Very good long term stability, Stabilizing E-PVC Viscosity at 20C (mPa.s): 130 Color Gardner (max.): 2 Density at 20C (g/cm3): 1.11
OM 1000: Fields: Calendering, Rigid PVC: Nontox Properties: Transparent, Phenol-free, Good self-lubrication, Very good initial color, Very good color hold Viscosity at 20C (mPa.s): 400 Color Gardner (max.): 6 Density at 20C (g/cm3): 1.00
Stabilizers 17
Baerlocher U.S.A.: BAEROSTAB Organotin Stabilizers: Organotin Mercaptide/Carboxylates: Butyl: M 25-32: Fields: Extrusion, Flexible PVC, Plastisol Properties: Transparent, Weather resistant, Phenol-free, No selflubrication, Very good initial color, Very good color hold, Stabilizing E-PVC Viscosity at 20C (mPa.s): 200 Color Gardner (max): 2 Density at 20C (g/cm3): 1.09
M 36: Fields: Calendering, Extrusion, Blown Films, Injection/Blow Molding, Rigid PVC: Technical, Semi-rigid PVC Properties: Transparent, Phenol-free, No self-lubrication, Very good initial color, Very good color hold, Very good long term stability, Low fogging, Stabilizing E-PVC, High Vicat temperature Powder Color: White Density at 20C (g/cm3): 1.49
M 62: Fields: Plastisol Properties: Transparent, Weather resistant, Phenol-free, No selflubrication, Very good initial color, very good color hold, Kicking activity, Stabilizing E-PVC Viscosity at 20C (mPa.s): 280 Color Gardner (max.): 2 Density at 20C (g/cm3): 1.15
M 62 A: Fields: Plastisol Properties: Transparent, Weather resistant, Phenol-free, No selflubrication, Very good initial color, Very good color hold, Kicking activity, Stabilizing E-PVC Viscosity at 20C (mPa.s): 200 Color Gardner (Max.): 2 Density at 20C (g/cm3): 1.15
18
Plastics Additives
Baerlocher U.S.A.: BAEROSTAB Organotin Stabilizers: Organotin Mercaptide/Carboxylates (Continued): Butyl (Continued): M 63: Fields: Extrusion, Rigid PVC: Technical Properties: Weather resistant, Phenol-free, Good self-lubrication, Very good initial color, Very good color hold Viscosity at 20C (mPa.s): 130 Color Gardner (max.): 2 Density at 20C (g/cm3): 1.07
M 90: Fields: Plastisol Properties: Transparent, Weather resistant, Phenol-free, No selflubrication, Very good initial color, Very good color hold, Very good long term stability, Kicking activity, Stabilizing E-PVC Viscosity at 20C (mPa.s): 110 Color Gardner (Max.): 2 Density at 20C (g/cm3): 1.16
MST/M 260: Fields: Plastisol Properties: Transparent, Weather resistant, No self-lubrication, Very good initial color, Very good color hold, Very good long term stability Viscosity at 20C (mPa.s): 300 Color Gardner (max.): 2 Density at 20C (g/cm3): 1.14
Octyl: OM 36: Fields: Calendering, Extrusion, Blown Films, Injection/Blow Molding, Rigid PVC: Technical, Semi-rigid PVC Properties: Transparent, Low odor, Phenol-free, No self-lubrication, Very good initial color, Very good color hold, Very good long term stability, Low fogging, Stabilizing E-PVC, High Vicat temperature Powder Color: White Density at 20C (g/cm3): 1.28
Stabilizers 19
Baerlocher U.S.A.: Lead Stabilizers: Lead Commodities: BAROSTAB V 220 MC: Chemical basic: Tribasic lead sulphate Residue on ignition (%): 96.0-98.0 Lead content (%): 81.0-83.0 Moisture (%): max. 0.2 Density (g/cm3): 6.6
Barostab V 420 MC: Chemical basic: tetrabasic lead sulphate Residue on ignition (%): 97.0-99.0 Lead content (%): 82.0-84.0 Moisture (%): max. 0.2 Density (g/cm3): 7.2
PEBETAL: Chemical basic: dibasic lead phthalate Residue on ignition (%): 78.5-80.5 Lead content (%): 74.0-76.0 Moisture (%): max. 0.2 Density (g/cm3): 4.5
Barostab Pb 51 S: Chemical basic: dibasic lead stearate Residue on ignition (%): 54.5-56.5 Lead content (%): 50.0-52.0 Moisture (%): max. 0.2 Density (g/cm3): 2.0
Barostab Pb 28 F: Chemical basic: neutral lead stearate Residue on ignition (%): 28.5-30.5 Lead content (%): 27.0-29.0 Moisture (%): max. 1.0 Density (g/cm3): 1.4
PEBEFOS FP: Chemical basic: dibasic lead phosphite Residue on ignition (%): 97.9-99.9 Lead content (%): 81.0-83.0 Moisture (%): max. 0.8 Density (g/cm3): 7.0
PEBEFOS (SULFOFOS C): Chemical basic: dibasic lead phosphite/sulphite Residue on ignition (%): 97.9-99.9 Lead content (%): 81.0-83.0 Moisture (%): max. 0.8 Density (g/cm3): 6.1
20
Plastics Additives
Baerlocher U.S.A.: Lead Stabilizers: Characteristics of Commodity Modifications: Basis BAROSTAB V 220 MC: BAROSTAB E 500: Residue on ignition (%): 83.1-87.1 Lead content (%): 72.0-76.0 Density (g/cm3): 3.8
Barostab TX 500: Residue on ignition (%): 79.5-82.5 Lead content (%): 66.5-69.5 Density (g/cm3): 3.3
Barostab SMS 500: Residue on ignition (%): 80.6-83.6 Lead content (%): 66.5-69.5 Density (g/cm3): 3.3
Barostab V 220 MC/DOP: Residue on ignition (%): 93.0-96.0 Lead content (%): 78.0-81.0 Density (g/cm3): 5.6
Barostab V 220 MC/DIDP: Residue on ignition (%): 93.0-96.0 Lead content (%): 78.0-81.0 Density (g/cm3): 5.6
Barostab V 220 TM: Residue on ignition (%): 93.0-96.0 Lead content (%): 78.0-81.0 Density (g/cm3): 5.6
Barostab V 220 MC/B: Residue on ignition (%): 93.0-96.0 Lead content (%): 78.0-81.0 Density (g/cm3): 5.8
Barostab V 220 MC/DIS: Residue on ignition (%): 92.0-95.0 Lead content (%): 72.0-76.0 Density (g/cm3): 5.4
Barostab V 220 LD: Residue on ignition (%): 88.0-91.0 Lead content (%): 72.0-76.0 Density (g/cm3): 4.6
Barostab V 220 LTM: Residue on ignition (%): 86.0-89.0 Lead content (%): 70.0-73.0 Density (g/cm3): 4.1
Stabilizers 21
Baerlocher U.S.A.: Lead Stabilizers: Characteristics of Commodity Modifications (Continued): Basis BAROSTAB V 420 MC: Barostab V 420 MC-B/DOP: Residue on ignition (%): 90.0-93.0 Lead content (%): 76.0-79.0 Density (g/cm3): 5.2
Basis PEBETAL: Barostab E 503: Residue on ignition (%): 67.7-69.7 Lead content (%): 62.6-65.6 Density (g/cm3): 3.0
Pebetal B: Residue on ignition (%): 76.0-79.0 Lead content (%): 70.6-73.6 Density (g/cm3): 4.3
Pebetal-DOP: Residue on ignition (%): 76.0-79.0 Lead content (%): 70.6-73.6 Density (g/cm3): 4.1
Pebetal TM: Residue on ignition (%): 76.0-79.0 Lead content (%): 70.6-73.6 Density (g/cm3): 4.1
Pebetal LTM: Residue on ignition (%): 71.1-73.1 Lead content (%): 64.0-67.0 Density (g/cm3): 3.3
22
Plastics Additives
Baerlocher U.S.A.: Lead Stabilizers: Characteristics of Commodity Modifications (Continued): Basis BAROSTAB Pb 51 S: Barostab E 504: Residue on ignition (%): 49.0-52.0 Lead content (%): 44.5-47.5 Density (g/cm3): 1.8
BAROPAN Pb 51 S/ES: Residue on ignition (%): 51.8-54.8 Lead content (%): 45.0-47.0 Density (g/cm3): 1.9
Barostab Pb 51 S/DOP: Residue on ignition (%): 52.8-55.8 Lead content (%): 48.0-51.0 Density (g/cm3): 1.9
Barostab Pb 51 S/TM: Residue on ignition (%): 52.8-55.8 Lead content (%): 48.0-51.0 Density (g/cm3): 1.9
Basis Pb 28 F: Barostab Pb 28 AV: Residue on ignition (%): 28.4-30.4 Lead content (%): 27.0-29.0 Density (g/cm3): 1.4
Barostab TX Pb 28: Residue on ignition (%): 29.0-31.0 Lead content (%): 28.0-30.0 Density (g/cm3): 1.4
Stabilizers 23
Baerlocher U.S.A.: Lead Stabilizers: Characteristics of Commodity Modifications (Continued): Basis PEBEFOS FP: BAROSTAB E 502 FP: Residue on ignition (%): 87.3-90.3 Lead content (%): 73.0-76.0 Density (g/cm): 4.4
Pebefos FP/ND: Residue on ignition (%): 94.0-97.0 Lead content (%): 78.8-81.0 Density (g/cm3): 5.9
Pebefos XS: Residue on ignition (%): 78.0-81.0 Lead content (%): 64.5-67.5 Density (g/cm3): 3.2
Basis Pebefos: Barostab E 502: Residue on ignition (%): 88.2-91.2 Lead content (%): 73.0-76.0 Density (g/cm3): 4.0
Pebefos /ND: Residue on ignition (%): 95.0-98.0 Lead content (%): 78.0-81.0 Density (g/cm3): 5.3
Barostab SMS 502: Residue on ignition (%): 81.9-84.9 Lead content (%): 67.8-70.8 Density (g/cm3): 3.2
24
Plastics Additives
Ciba Specialty Chemicals: Additives for Polyolefins: Antioxidants (AO) & Processing Stabilizers: Primary Antioxidants: Irganox 1010: High molecular weight, phenolic AO with low volatility; extends long-term thermal stability (LTTS)
Irganox 1035: Phenolic AO for cross-linked or carbon black containing systems (i.e. cable compounds)
Irganox 1076: Highly compatible, low-color phenolic AO for PE; available in preferred product forms.
Irganox 1081: High performance, highly compatible AO for cross-linked PE (i.e. high voltage power cable)
Irganox 1330: Extraction resistant phenolic AO with low water carryover for film and tape
Irganox 1425 WL: Phenolic AO with high extraction resistance; polyethylene wax carrier
Irganox 3114: Highly effective, non-discoloring phenolic antioxidant, high extraction resistance
Irganox E 201: Vitamin E, a highly efficient phenolic AO with consumer appeal and excellent MF stability
Irganox E 217: Granular, dispersible solid with GRAS coaddditives for food and medical packaging
Irganox E 218: Low dust vitamin E blend with calcium stearate for food and medical packaging
Irganox MD 1024: High performance phenolic AO for applications requiring metal deactivation (Cu passivator)
Stabilizers 25
Ciba Specialty Chemicals: Additives for Polyolefins: Antioxidants (AO) & Processing Stabilizers (Continued): Primary Antioxidants (Continued): Irganox E 201: Vitamin E, a high efficiency phenolic AO with consumer appeal and excellent MF stability
Irganox E 217: Granular, dispersible solid with GRAS co-additives for food and medical packaging
Irganox E 218: Low dust vitamin E blend with calcium stearate for food and medical packaging
Irganox MD 1024: High performance phenolic AO for applications requiring metal deactivation (Cu passivator)
26
Plastics Additives
Ciba Specialty Chemicals: Additives for Polyolefins: Antioxidants (AO) & Processing Stabilizers (Continued): Secondary Antioxidants: Irgafos 168: Hydrolytically stable phosphite, synergy with primary AO's; maintains color properties
Irgafos 38: High performance, highly compatible phosphite with low melt viscosity
Irgafos P-EPQ: High performance, highly compatible phosphonite with low melt viscosity, offers low color
Irganox PS 800: Extends long-term thermal stability as a synergist for phenolic antioxidants
Irganox PS 802: Extends long-term thermal stability as a synergist for phenolic antioxidants
Stabilizers 27
Ciba Specialty Chemicals: Additives for Polyolefins: Antioxidants (AO) & Processing Stabilizer Blends: Irganox B 1411: Synergistic phenol/phosphite blend mainly for PP applications
Irganox B 1412: Synergistic phenol/phosphite blend with higher phosphite levels mainly for PP applications
Irganox B 215: Synergistic, convenient phenol/phosphite blend for a balance of stabilization requirements
Irganox B 220: Synergistic blend; high phosphite content for demanding processing conditions
Irganox B 225: Synergistic, convenient blend with high phenolic AO content; extends LTTS
Irganox B 311: Synergistic phenol/phosphite blend for low water carry-over
Irganox B 313: Synergistic blend with high phenolic content for increased LTTS, low water carry-over
Irganox B 501 W: Synergistic blend of phenol/phosphite for PP fiber
Irganox B 561: Synergistic phenol/phosphite blend for demanding processing conditions
Irganox B 900: Synergistic phenol/phosphite blend with high phosphite levels mainly for PE applications
Irganox B 921: Synergistic phenol/phosphite blend with high phosphite levels mainly for PE applications
Irganox HP 2215: High performance, cost-effective stabilizer system with added processing stability
Irganox HP 2225: High performance, cost-effective stabilizer system for PP and demanding PE applications
28
Plastics Additives
Ciba Specialty Chemicals: Additives for Polyolefins: Antioxidants (AO) & Processing Stabilizer Blends (Continued): IRGANOX HP 2251: High performance, cost-effective stabilizer; additional phenolic AO for LTTS
Irganox HP 2411: High performance, cost-effective stabilizer system primarily for molding applications and fibers
Irganox HP 2921: High performance, cost-effective stabilizer system for demanding PE applications
Irganox XP 420: Highly efficient system for PE applications requiring melt flow control and low color
Irganox XP 490: Highly efficient processing stabilization; highly compatible with LLDPE and with low color
Irganox XP 620: Highly efficient stabilization for PP and HDPE for improved melt flow and color properties
Irganox XP 621: Highly efficient stabilization for PP and HDPE especially for LTTS, low color and melt stability
Stabilizers 29
Ciba Specialty Chemicals: Additives for Polyolefins: Hindered Amine Light Stabiizers (HALS): CHIMASSORB 119: High molecular weight HALS with low pigment interaction and LTTS in filled PP
Chimassorb 2020: High molecular weight HALS; superior light/thermal stability with low pigment interaction
Chimassorb 2030: Synergistic blend of high molecular weight HALS for superior light/thermal stability
Chimassorb 2040: Synergistic blend of high and low molecular weight HALS for superior light/thermal stability
Chimassorb 944: High molecular weight HALS with low volatility for a wide range of applications
TINUVIN 111: Synergistic blend of high molecular weight HALS, intermediate chemical resistance
Tinuvin 123: Non-interacting, nonbasic NOR-HALS for liquid systems
Tinuvin 123 S: Non-interacting, nonbasic NOR-HALS in free-flowing solid form, for molding application5
Tinuvin 492: Synergistic, pesticide resistant UV stabilizer blend for midterm agricultural film
Tinuvin 494: Synergistic, pesticide resistant UV stabilizer blend for longterm agricultural film
Tinuvin 622: Oligomeric HALS with excellent color, for critical welding of film and sheets
Tinuvin 765: Liquid, low molecular weight HALS for liquid color systems
Tinuvin 770: Low molecular weight HALS, particularly for thick section applications
30
Plastics Additives
Ciba Specialty Chemicals: Additives for Polyolefins: Hindered Amine Light Stabilizers (HALS) (Continued): Tinuvin 783: Synergistic blend of high molecular weight HALS with the highest level food contact clearances
Tinuvin 791: Blend of high and low molecular weight HALS for synergistic performance in thick sections
Tinuvin C 353: Highest performance system for pigmented PP fiber
Stabilizers 31
Ciba Specialty Chemicals: Additives for Polyolefins: PhenolFree Stabilizers: FIBERSTAB L 112: Phenol-free stabilization system, gas fade resistant
IRGASTAB FS 210: Phenol-free process/light-stabilizer, low color, gas fade resistant
Irgastab FS 410: Phenol-free process/light-stabilizer, low color, gas fade resistant
Irgastab FS 811: Light-stabilizer system, phenol-free process stabilizer
Irgastab FS 812: Light stabilizer system, phenol-free process stabilizer for pigmented applications
32
Plastics Additives
Ciba Specialty Chemicals: Additives for Polyolefins: Products for Recycling: RECYCLOSTAB range: Processing and long-term thermal stabilization for polyolefins and mixed plastics
RECYCLOSSORB 550: Light and basic stabilization for polyolefins and polyolefin blends
RECYCLOBLEND 660: Suitable for plastic recyclates containing paint or ink residues
Stabilizers 33
Ciba Specialty Chemicals: Light Stabilizers for Polyolefins: TINUVIN 123: Molecular Weight: 737.2 Melting Point C: liquid Specific Gravity @ 20C: 0.97 TGA: temp at 10% Wt. Loss: 265 Appearance: pale yellow liquid
Tinuvin 234: Molecular Weight: 448 Melting Point C: 135-141 Specific Gravity @ 20C: 1.22 TGA: Temp. @ 10% Wt. Loss: 315 Appearance: Light yellow powder
Tinuvin 326: Molecular Weight: 316 Melting Point C: 140-141 Specific Gravity @ 20C: 1.32 TGA: Temp. @ 10% Wt. Loss: 245 Appearance: Light yellow powder
Tinuvin 327: Molecular Weight: 358 Melting Point C: 154-158 Specific Gravity @ 20C: 1.26 TGA: Temp. @ 10% Wt. Loss: 235 Appearance: pale yellow powder
Tinuvin 328: Molecular Weight: 351.5 Melting Point C: 79-87 Specific Gravity @ 20C: 1.17 TGA: Temp. @ 10% Wt. Loss: 230 Appearance: off-white powder
Tinuvin 622: Melting Point C: 55-70 Specific Gravity @ 20C: 1.18 TGA: Temp. @ 10% Wt. Loss: 335 Appearance: off-white powder
Tinuvin 770: Molecular Weight: 481 Melting Point C: 82-86 Specific Gravity @ 20C: 1.05 TGA: Temp. @ 10% Wt. Loss: 260 Appearance: white granules
34
Plastics Additives
Ciba Specialty Chemicals: Light Stabilizers for Polyolefins (Continued): Chimassorb 119: Molecular Weight: 2286 Melting Point C: 115-150 Specific Gravity @ 20C: 1.03-1.05 TGA: Temp. at 10% Wt. Loss: 350 Appearance: light yellow granules
Chimassorb 944: Molecular Weight: (579)n Mn>2500 Melting Point C: 120-150 Specific Gravity @ 20C: 1.07 TGA: Temp. at 10% Wt. Loss: 375 Appearance: off-white powder
Chimassorb 2020: Molecular Weight: 2600-3400 Melting Point C: 120-150 Specific Gravity @ 20C: 1.01 TGA: Temp. at 10% Wt. Loss: 375 Appearance: transparent, slightly yellow pellets
Stabilizers 35
Ciba Specialty Chemicals: Light Stabilizer Systems: Product TINUVIN 111: Tinuvin 123 S: Tinuvin 492: Tinuvin 494: Tinuvin 783: Tinuvin 791: Tinuvin C 353: IRGASTAB FS 210: Irgastab FS 410: Irgastab FS 811: Irgastab FS 812: FIBERSTAB L 112:
Blend Composition Chimasorb 119:Tinuvin 622 Tinuvin 123:Polypropylene Chimassorb 119:Oxides:Stearates Chimassorb 119:Oxides:Stearates Chimassorb 944:Tinuvin 622 Chimassorb 944:Tinuvin 770 Chimassorb 119:Tinuvin 234 Irgastab FS 042:Chimassorb 119 Irgastab FS 042:Chimassorb 944 Irgastab FS 042:Tinuvin 791 Irgastab FS 042:Tinuvin 791:Tinuvin 328 HP-136:IRGAFOS 168:Tinuvin 622
36
Plastics Additives
Fairmount Chemical Co., Inc.: MIXXIM CD-12 Metal Deactivator: Mixxim CD-12 is an outstanding metal deactivator used in stabilization of polyolefins. Advantages: * Mixxim CD-12 enhances thermal and color stability while protecting or significantly increasing electrical insulating properties at the recommended levels of use. * The extremely low volatility of Mixxim CD-12 provides processing stability at even the highest temperatures as well as protection against long-term heat aging. * Easily incorporated into the polyolefin product, Mixxim CD-12 provides excellent dispersion at normal manufacturing temperatures. * Mixxim CD-12 has excellent compatibility with polyolefins and most other organic polymers and a generally high resistance to extraction in oil or aqueous media. Mixxim CD-12 is recommended for evaluation in the following applications: 1-Electrical parts such as plugs, outlets and switches. 2-Other plastic fabricated parts used in contact with catalytic materials 3-Wire insulation and jacketing. 4-Polymer powder and other coatings applied on metal. 5-Hot melt and solution adhesives. 6-Deactivation of catalyst residue during polymerization or plastic processing. 7-Deactivation of metal contaminants in plastics 8-Oils and lubricants in contact with metal surfaces and contaminants at high temperature. Typical Properties: Appearance: White powder Melting Point: 302C TSCA Nomenclature: Benzamide, 2-Hydroxy-N-1H-1,2,4-Triazol-3-yl Molecular Formula: C9H8N4O2 Molecular Weight: 204 CAS Registry No.: 36411-52-6
Stabilizers 37
Ferro Corp.: FERRO UV-CHEK Light Stabilizers for Polymers: UV-Chek AM-340: 2,4-di-t-butylphenyl 3,5-di-t-butyl-4-hydroxybenzoate CAS #4221-80-1 White to cream crystalline powder Melting Point: 196C Molecular Weight: 438 Specific Gravity: 1.08 Compatible with most polyolefins, styrenics, polycarbonate, thermoplastic polyesters and elastomers. Very soluble in chlorinated and aromatic hydrocarbons. Moderate solubility in ketones and esters. Low solubility in aliphatic hydrocarbons and alcohols. Insoluble in water. Effective stabilizer in: Polyolefins and nylon, especially pigmented applications. Typical uses: Molded containers, stadium seats, car bumpers. Olefins and nylon fibers for carpets and turf. Synergist/coadditive with: Other UV stabilizers, benzophenones, benzotriazoles, HALS and nickels.
UV-Chek AM-300: 2-hydroxy-4-n-octyloxy-benzophenone CAS # 1843-05-6 Light yellow crystalline powder Melting Point: 48C Molecular Weight: 326 Specific Gravity: 1.17 Compatible in a wide variety of plastics and coatings. Very soluble in aromatic, aliphatic and ketone solvents. Low solubility in alcohols. Insoluble in water. Effective UV light absorber for: A variety of polymers. Flexible and semi-rigid PVC applications such as automotive body side molding, instrument panels, glove boxes. Various surface coatings including automotive applications. Recommended as: A costabilizer for polyolefin mulch or greenhouse film.
38
Plastics Additives
Ferro Corp.: FERRO UV-CHEK Light Stabilizers for Polymers (Continued): UV-Chek AM-104: Nickel dibutyldithiocarbamate CAS #13927-77-0 Dark green brittle flakes Ni-content: 12.5% Melting Point: 88C Molecular Weight: 468 Specific Gravity: 1.22 Compatible with polypropylene, HDPE, thermoplastic elastomers. Very soluble in aromatic or chlorinated solvents. Moderate solubility in ketones. Low solubility in aliphatic solvents. Insoluble in water. Stabilizer for: Polyolefins, PP stretched tape (raffia) in woven packaging applications. Cotton bale wrap. HDPE pipe and pipe wrap. Outdoor carpeting and synthetic turf. Use as: An antioxidant/antiozonant for SBR, NBR, CR, CO, IIR. Improves heat resistance of EPDM and CSM.
UV-Chek AM-205: Thio-bis-2,2'(4(1,1,3,3-tetramethylbutyl-phenol)-Nickel-2-ethylhexanoate CAS # 38727-83-2; 7580-31-6 Light green brittle flakes Ni-content: 13.0% Melting Point: 140C Molecular Weight: 1630 (wt. avg.) Specific Gravity: 1.19 Compatible with polypropylene, polyethylene and elastomers. Very soluble in aromatic or chlorinated solvents. Moderate solubility in aliphatic hydrocarbons and ketones. Insoluble in water. Ideally suited for: Polyethylene film for agricultural, construction and packaging. Does not interact with most common pesticides. Especially suited for: Pigmented polyolefin applications such as polypropylene indoor/outdoor carpets and synthetic turf. Synergistic combination with ZnO or AM-300.
Stabilizers 39
Ferro Corp.: FERRO UV-CHEK Light Stabilizers for Polymers (Continued): UV-Chek AM-595: Proprietary organic/inorganic complex containing Ba, Na and P. Fine white, free flowing powder Avg. Particle Size: 30 microns Specific Gravity: 2.12 Hygroscopic Disperses but does not melt or dissolve completely in polymers or solvents. Effective UV stabilizer in: Rigid or flexible PVC, including profiles, auto roofs, sheeting. Heat and Light Stabilizer for: CPE and CPVC. Single ply roofing and pond liners of CPE. Heat stabilizer for PCDC. Acid scavenger in: Flame retardant plastics. Reduces mold corrosion and extends the molding range. Prevents discoloration.
40
Plastics Additives
Ferro Corp.: THERM-CHEK Heat Stabilizers: BaZn: 120 L0HF: Types: Liquid, Primary Stabilizer Processes: Extrusion, Injection Molding, Plastisol Applications: General Purpose Product Attributes: Early Color Hold: Excellent Long Term Stability: Good High Flash (Liquids), ESO Compatibility
130: Types: Liquid, Primary Stabilizer Processes: Plastisol Applications: General Purpose Product Attributes: Early Color Hold: Good Long Term Stability: Good ESO Compatibility
134: Types: Liquid, Primary Stabilizer Processes: Extrusion, Injection Molding Applications: General Purpose Product Attributes: Early Color Hold: Excellent Long Term Stability: Excellent
139: Types: Liquid, Primary Stabilizer Processes: Calendering, Extrusion, Plastisol Applications: General Purpose Product Attributes: Early Color Hold: Excellent Long Term Stability: Good
1159 SF: Types: Liquid, Primary Stabilizer Processes: Extrusion, Injection Molding, Plastisol Applications: Application Specific Product Attributes: Early Color Hold: Good Long Term Stability: Good High Flash (Liquids), ESO Compatibility
6264: Types: Powder, Primary Stabilizer, Secondary Stabilizer/Booster Processes: Extrusion, Injection Molding Applications: General Purpose Product Attributes: Early Color Hold: Good Long Term Stability: Excellent
BH 940: Types: Powder, Primary Stabilizer Processes: Calendering, Extrusion Applications: General Purpose Product Attributes: Early Color Hold: Good Long Term Stability: Excellent
Stabilizers 41
Ferro Corp.: THERM-CHEK Heat Stabilizers (Continued): BaZn (Continued): PS 380: Types: Liquid, Primary Stabilizer Processes: Plastisol Applications: Application Specific Product Attributes: Early Color Hold: Good Long Term Stability: Good
SP 175: Types: Liquid, Primary Stabilizer Processes: Calendering, Extrusion Applications: Crystal Clear, Filled White, General Purpose Product Attributes: Early Color Hold: Excellent Long Term Stability: Excellent
SP 1363: Types: Liquid, Primary Stabilizer Processes: Plastisol Applications: Crystal Clear Product Attributes: Early Color Hold: Excellent Long Term Stability: Good ESO Compatibility
BaCd/BaCdZn: 6-V-6A: Types: Liquid, Primary Stabilizer Processes: Plastisol Applications: General Purpose Product Attributes: Early Color Hold: Excellent Long Term Stability: Excellent ESO Compatibility
1238: Types: Liquid, Primary Stabilizer Processes: Calendering, Extrusion, Injection Molding, Plastisol Applications: Crystal Clear, General Purpose Product Attributes: Early Color Hold: Excellent Long Term Stability: Good ESO Compatibility
6098: Types: Liquid, Primary Stabilizer Processes: Extrusion, Injection Molding, Plastisol Applications: General Purpose Product Attributes: Early Color Hold: Good Long Term Stability: Excellent ESO Compatibility
42
Plastics Additives
Ferro Corp.: THERM-CHEK Heat Stabilizers (Continued): BaCd/BaCdZn: (Continued): SP 530: Types: Liquid, Primary Stabilizer Processes: Calendering, Extrusion, Injection Molding, Plastisol Applications: Crystal Clear, Filled White, General Purpose Product Attributes: Early Color Hold: Excellent Long Term Stability: Good ESO Compatibility
SP 1179: Types: Powder, Primary Stabilizer Processes: Calendering, Extrusion, Injection Molding Applications: Filled White, General Purpose Product Attributes: Early Color Hold: Excellent Long Term Stability: Excellent
CaZn: 360: Types: Liquid, Primary Stabilizer Processes: Calendering, Plastisol Applications: Crystal Clear, General Purpose Product Attributes: Early Color Hold: Excellent Long Term Stability: Good High Flash (Liquids)
362: Types: Liquid, Primary Stabilizer Processes: Calendering, Plastisol Applications: General Purpose Product Attributes: Early Color Hold: Excellent Long Term Stability: Good High Flash (Liquids)
SP 356: Types: Powder, Secondary Stabilizer/Booster Processes: Extrusion Applications: Filled White, General Purpose Product Attributes: Early Color Hold: Excellent Long Term Stability: Good
SP 362: Types: Powder, Secondary Stabilizer/Booster Processes: Calendering Applications: Filled White Product Attributes: Early Color Hold: Excellent Long Term Stability: Good
Stabilizers 43
Ferro Corp.: THERM-CHEK Heat Stabilizers (Continued): Non Toxic (CFR Title 21): 59-V-11: Types: Powder, Primary Stabilizer Processes: Extrusion, Injection Molding, Plastisol Applications: General Purpose Product Attributes: Early Color Hold: Good Long Term Stability: Good
654: Types: Liquid, Primary Stabilizer Processes: Extrusion, Injection Molding, Plastisol Applications: Crystal Clear Product Attributes: Early Color Hold: Good Long Term Stability: Good High Flash (Liquids) ESO Compatibility
659: Types: Liquid, Primary Stabilizer Processes: Extrusion, Injection Molding, Plastisol Applications: Crystal Clear Product Attributes: Early Color Hold: Good Long Term Stability: Good High Flash (Liquids) ESO Compatibility
707X: Types: Paste, Primary Stabilizer Processes: Extrusion, Injection Molding, Plastisol Applications: Crystal Clear Product Attributes: Early Color Hold: Excellent Long Term Stability: Good High Flash (Liquids) ESO Compatibility
44
Plastics Additives
Ferro Corp.: THERM-CHEK Heat Stabilizers (Continued): Non Toxic (CFR Title 21) (Continued): 760X: Types: Paste, Primary Stabilizer Processes: Extrusion, Injection Molding, Plastisol Applications: Crystal Clear Product Attributes: Early Color Hold: Good Long Term Stability: Good High Flash (Liquids) ESO Compatibility
763: Types: Paste, Primary Stabilizer Processes: Extrusion, Injection Molding, Plastisol Applications: Crystal Clear Product Attributes: Early Color Hold: Good Long Term Stability: Good High Flash (Liquids) ESO Compatibility
5526: Types: Liquid, Secondary Stabilizer/Booster Processes: Calendering, Extrusion, Injection Molding, Plastisol Applications: Crystal Clear Product Attributes: Early Color Hold: Good Long Term Stability: Excellent High Flash (Liquids) ESO Compatibility
PLAS CHEK 775: Types: Liquid, Secondary Stabilizer/Booster Processes: Calendering, Extrusion, Injection Molding, Plastisol Applications: General Purpose Product Attributes: Early Color Hold: Good Long Term Stability: Excellent
SP 1546: Types: Powder, Primary Stabilizer Processes: Extrusion, Injection Molding, Plastisol Applications: Crystal Clear, Filled White, General Purpose Product Attributes: Early Color Hold Long Term Stability
Stabilizers 45
Ferro Corp.: THERM-CHEK Heat Stabilizers (Continued): Phosphites: 904: Types: Liquid, Secondary Stabilizer/Booster Processes: Calendering, Extrusion, Injection Molding, Plastisol Applications: Crystal Clear, General Purpose Product Attributes: Early Color Hold: Excellent Long Term Stability: Good High Flash (Liquids) ESO Compatibility
907: Types: Liquid, Secondary Stabilizer/Booster Processes: Calendering, Extrusion, Injection Molding, Plastisol Applications: General Purpose Product Attributes: Early Color Hold: Excellent Long Term Stability: Good High Flash (Liquids) ESO Compatibility
910: Types: Liquid, Secondary Stabilizer/Booster Processes: Calendering, Extrusion, Injection Molding, Plastisol Applications: General Purpose Product Attributes: Early Color Hold: Excellent Long Term Stability: Good High Flash (Liquids) ESO Compatibility
912: Types: Liquid, Secondary Stabilizer/Booster Processes: Calendering, Extrusion, Injection Molding, Plastisol Applications: Crystal Clear Product Attributes: Early Color Hold: Excellent Long Term Stability: Excellent High Flash (Liquids) ESO Compatibility
5221: Types: Liquid, Secondary Stabilizer/Booster Processes: Calendering, Extrusion, Injection Molding, Plastisol Applications: General Purpose Product Attributes: Early Color Hold: Good Long Term Stability: Good High Flash (Liquids) ESO Compatibility
46
Plastics Additives
Ferro Corp.: THERM-CHEK Heat Stabilizers (Continued): Sn: 820: Types: Liquid, Primary Stabilizer Processes: Calendering, Extrusion, Injection Molding Applications: Crystal Clear Product Attributes: Early Color Hold: Good Long Term Stability: Good High Flash (Liquids) ESO Compatibility
835: Types: Liquid, Primary Stabilizer Processes: Plastisol Applications: Crystal Clear Product Attributes: Early Color Hold: Good Long Term Stability: Good High Flash (Liquids) ESO Compatibility
840: Types: Liquid, Primary Stabilizer Processes: Calendering, Extrusion, Injection Molding, Plastisol Applications: Crystal Clear, General Purpose Product Attributes: Early Color Hold: Excellent Long Term Stability: Excellent High Flash (Liquids) ESO Compatibility
Sr: 135: Types: Liquid, Primary Stabilizer Processes: Extrusion, Plastisol Applications: Filled White Product Attributes: Early Color Hold: Excellent Long Term Stability: Good ESO Compatibility
Stabilizers 47
Ferro Corp.: THERM-CHEK Heat Stabilizers (Continued): Zn: 5019: Types: Liquid, Secondary Stabilizer/Booster Processes: Calendering, Extrusion, Injection Molding, Plastisol Application: Application Specific Product Attributes: Early Color Hold: Excellent Long Term Stability: Poor High Flash (Liquids) ESO Compatibility
6134: Types: Powder, Secondary Stabilizer/Booster Processes: Calendering, Extrusion, Injection Molding Application: General Purpose Product Attributes: Early Color Hold: Excellent Long Term Stability: Good
48
Plastics Additives
Halstab: Non-Lead Stabilizers: HALSTAB 1214: Composition: Zinc Free Tin Synergist Appearance: Fine, light colored powder Specific Gravity: 2.10-2.15 % Retained (325 Mesh): 0.5% max. Low cost costabilizer for use with organotin atabilizers. Nonlubricating, non-toxic and easily dispersed. Effective with all types of tin stabilizers. Primary applications: Rigid PVC siding, profile, pipe and molded fittings. Also effective in flexible PVC applications when combined with an organotin stabilizer.
Halstab 1219: Composition: Coated Acid Absorber Appearance: Fine, light colored powder Specific Gravity: 2.10-2.15 % Retained (325 Mesh): 0.5% max Costabilizer for use with lead stabilizers specifically to improve stability in the presence of destabilizing flame retardant and smoke suppressant additives. Primary applications: Plenum cable jackets and related constructions.
Halstab 1180: Composition: Barium/Zinc Based Stabilizer System Appearance: Fine, light colored powder Specific Gravity: 1.75-1.80 % Retained (325 Mesh): 1.0% max. Alternative to lead based stabilizers for wire & cable applications. Does not require ESO.
Halstab 1130: Composition: Non-toxic, Calcium/Zinc/Acid Acceptor Blend Appearance: Fine, white powder % Active: 100% % Retained (325 Mesh): 0.5% max. Moisture: 0.5% max. Low cost non-toxic calcium/zinc stabilizer with equivalent effectiveness to tribasic lead sulfate. Epoxidized oils are not required with Halstab 1130. Primary applications: Automotive wire and general purpose filled extrusions.
Stabilizers 49
Halstab: Non-Lead Stabilizers (Continued): Halstab 1131: Composition: Non-toxic, Zinc/Acid Acceptor Blend Appearance: Fine, white powder % Active: 100% % Retained (325 mesh): 0.5% max. Moisture: 0.5% max. Low cost non-toxic zinc carboxylate acid acceptor blend. Primary applications: Powder booster for liquid stabilizers. Sole stabilizer for highly filled compounds such as extruded cove base.
Halstab 1201: Composition: Calcium/Zinc Based Stabilizer System Appearance: Fine, light colored powder Specific Gravity: 1.74-1.79 Low cost, non-toxic slightly lubricating calcium/zinc stabilizer with the effectiveness of a lead stabilizer. Does not require ESO. Epoxidized oils are not necessary. Primary applications: Cable jackets and other filled compounds. General purpose and flexible PVC compounds. Can also be used as a booster for liquid stabilizers.
50
Plastics Additives
Halstab: Powdered Lead Stabilizers: HALBASE 10: Chemical Type: Tribasic Lead Sulfate % PbO: 88.7 Specific Gravity: 6.9 PVC Application: Wire & Cable 60-90 Degrees
Halbase 10 EP: Chemical Type: Tribasic Lead Sulfate/Coated % PbO: 83.2 Specific Gravity: 5.0 PVC Application: Wire & Cable 60-90 Degrees
Halbase 11: Chemical Type: Basic Lead Sulfate % PbO: 84.5 Specific Gravity: 6.7 PVC Application: Polymeric/Polyester
Halbase 100: Chemical Type: Modified Basic Lead Sulfate % PbO: 65.5 Specific Gravity: 5.0 PVC Application: Foams & Plastisols
Halbase 100 EP: Chemical Type: Modified Basic Lead Sulfate/Coated % PbO: 66.6 Specific Gravity: 4.3 PVC Application: Wire & Cable 60-80 Degrees
HALCARB 20: Chemical Type: Basic Lead Carbonate % PbO: 87.7 Specific Gravity: 6.9 PVC Application: Wire & Cable 60-80 Degrees UV Exposure
Halcarb 20EP: Chemical Type: Basic Lead Carbonate/Coated % PbO: 81.5 Specific Gravity: 5.1 PVC Application: Wire & Cable 60-80 Degrees
Halcarb 200: Chemical Type: Modified Basic Lead Carbonate % PbO: 66.1 Specific Gravity: 5.0 PVC Application: Wire & Cable 60-80 Degrees
Stabilizers 51
Halstab: Powdered Lead Stabilizers (Continued): HALCARB 200 EP: Chemical Type: Modified Basic Lead Carbonate/Coated % PbO: 48.2 Specific Gravity: 3.6 PVC Application: Wire & Cable 60-80 Degrees
HALSTAB 30: Chemical Type: Lead Sulphophthalate Complex % PbO: 85.0 Specific Gravity: 5.9 PVC Application: Electrical Tape
Halstab 30 EP: Chemical Type: Lead Sulphophthalate Complex/Coated % PbO: 79.0 Specific Gravity: 5.0 PVC Application: Profiles
Halstab 31: Chemical Type: Lead Sulphophthalate Complex/Modified % PbO: 65.2 Specific Gravity: 3.8 PVC Application: Wire & Cable 60-105 Degrees
Halstab 60: Chemical Type: Lead Sulphophthalate Complex % PbO: 83.5 Specific Gravity: 5.4 PVC Application: Wire & Cable 60-105 Degrees
Halstab 60 EP: Chemical Type: Lead Sulphophthalate Complex/Coated % PbO: 77.6 Specific Gravity: 4.4 PVC Application: Wire & Cable 60-105 Degrees
Halstab 600 EP: Chemical Type: Modified Lead Sulphophthalate Complex/Coated % PbO: 60.9 Specific Gravity: 3.8 PVC Application: Wire & Cable 60-105 Degrees
HALTHAL: Chemical Type: Dibasic Lead Phthalate % PbO: 78.5 Specific Gravity: 4.6 PVC Application: Wire & Cable 60-105 Degrees
52
Plastics Additives
Halstab: Powdered Lead Stabilizers (Continued): Halthal EP: Chemical Type: Dibasic Lead Phthalate/Coated % PbO: 73.9 Specific Gravity: 3.9 PVC Application: Wire & Cable 60-105 Degrees
HALPHOS: Chemical Type: Dibasic Lead Phosphite % PbO: 90.2 Specific Gravity: 6.9 PVC Application: UV Exposure
Halphos EP: Chemical Type: Dibasic Lead Phosphite/Coated % PbO: 82.5 Specific Gravity: 5.0 PVC Application: UV Exposure
HALSTAB TLF: Chemical Type: Tetrabasic Lead Fumarate % PbO: 89.0 Specific Gravity: 6.5 PVC Application: PVC Cable & Chlorosulfonated PE
Halstab TLM: Chemical Type: Tribasic Lead Maleate % PbO: 89.5 Specific Gravity: 6.3 PVC Application: PVC Cable & Chlorosulfonated PE
HAL-LUB-D: Chemical Type: Dibasic Lead Stearate % PbO: 55.4 Specific Gravity: 2.0 PVC Application: Co-Stabilizer Lubricant
HAL-LUB-N: Chemical Type: Normal Lead Stearate % PbO: 30.2 Specific Gravity: 1.4 PVC Application: Co-stabilizer Lubricant
Stabilizers 53
Rhein Chemie Corp.: STABAXOL Antihydrolysis Agents: Product Selection and Market Overview Guide: Product Name Stabaxol I Stabaxol P Stabaxol P-100 Stabaxol 0115 Stabaxol KE-7646 Masterbatch Stabaxol KE-8059 Stabaxol KE-8993 Stabaxol KE-9193
Application/Market PET, EVA, Elastomers PET, PBT, EVA, Nylon, TPU, and Coatings PET and Polyamides for Monofilaments MDI and NDI Based Elastomers Thermalplastic Polyesters PET Thermalplastic Polyesters PET Processing Aid for Polyamides Monofilaments Processing Aid for Injection Molding
Stabaxol is the tradename for Carbodiimides from Rhein Chemie
Current Carbodiimide Application Areas: 1. 2. 3. 4. 5. 6. 7.
Stabilized monofilament PET yarn Thermoplastic polyester urethanes Castable polyester urethanes--TDI, MDI, NDI Millable gum urethanes Adhesive formulations Stabilized EVA copolymers Stabilized polyester polyol
New Carbodiimide Application Areas: 1. 2. 3. 4. 5.
Polycarbonate/PET blends Nylons Copolyester thermoplastic elastomers Epoxy based adhesives for composites Polyesteramide/Polyetheresteramide TPE's
54
Plastics Additives
Rhein Chemie Corp.: STABAXOL Antihydrolysis Agents (Continued): Stabaxol I: CAS No.: 2162-74-5 Antihydrolysis Agent 2,2',6,6'-Tetraisopropyldiphenyl Carbodiimide Application: Stabaxol I is an effective stabilizer for use in polyester based plastics. The product actively scavenges acidic groups as well as water. The product significantly increases the resistance to hydrolysis of polyester based urethane elastomers. Staboxol I also increases the long term stability of Baycoll and Desmocoll based adhesives in hot humid climates. The addition of 0.5 parts of Stabaxol I per 100 parts of polyester approximately doubles the level of hydrolysis resistance at ambient temperature compared to an unstabilized elastomer. The addition of 2 parts of Stabaxol I per 100 parts of polyester will increase hydrolysis resistance about four fold at ambient temperature. The use of more than 2 parts by weight is not recommended, since Stabaxol I may leach from some end products. Also, Stabaxol I does not have the catalytic effect on the isocyanate-polyol reaction that Stabaxol M had. Product Description: Physical form: Yellowish waxlike substance Melting point: Approx. 40C Density: Approx. 0.95 g/ml at 50C Stabaxol I is soluble in selected organic solvents such as acetone, methylene chloride, toluene, and polyester.
Stabilizers 55
Rhein Chemie Corp.: STABAXOL Antihydrolysis Agents (Continued): STABAXOL P Antihydrolysis Agent: CAS No.: 81972-48-7 Aromatic Polycarbodiimide Application: Stabaxol P is typically used to improve the hydrolytic stability of plastics containing ester groups, including millable gum polyurethanes and will significantly improve the hot air resistance of ethylene vinyl acetate copolymers. Due to wide variation in application areas, it is recommended that users determine the optimum level of addition for each system. Typically, 0.5 to 5 pbw of Stabaxol P per 100 parts of compound (100% solid) is recommended. Stabaxol P, as supplied, contains approximately 4% of inorganic material to prevent lump formation. Stabaxol P will not normally bloom from a finished polymer. Product Description: Density at 20C, g/ml: 1.05 Carbodiimide content, %: 12.5% minimum Melting Range: Begins to sinter above 50C Viscous above 70C Flows slowly about 90C Stabaxol P is an effective stabilizer intended mainly for polymers containing ester groups, to increase resistance to hydrolysis. The material is supplied as light colored flakes or powder and is an improved version of the product Stabaxol PCD.
Stabaxol KE 7646: CAS. No.: 25038-59-9/29963-44-8 Uses: Antihydrolysis agent for thermoplastic polyesters, especially for PET Product Description: Composition: 85 weight % (PET), 15 weight % aromatic polycarbodiimide (P100) Appearance: Yellowish cylindrical granules Density (20C/68F): Approx. 1.25 g/ml Melting Point: Approx. 260C (500F) Moisture content:
