Ubuntu Unleashed 2010 Edition: Covering 9.10 and 10.4 (5th Edition)

Andrew Hudson Paul Hudson Matthew Helmke Ryan Troy Ubuntu UNLEASHED 2010 Edition Covering 9.10 and 10.4 800 East 96th...

Author: Andrew Hudson | Paul Hudson | Matthew Helmke | Ryan Troy

20 downloads 999 Views 13MB Size Report

This content was uploaded by our users and we assume good faith they have the permission to share this book. If you own the copyright to this book and it is wrongfully on our website, we offer a simple DMCA procedure to remove your content from our site. Start by pressing the button below!
Report copyright / DMCA form

DOWNLOAD PDF

Andrew Hudson Paul Hudson Matthew Helmke Ryan Troy

Ubuntu UNLEASHED 2010 Edition Covering 9.10 and 10.4

800 East 96th Street, Indianapolis, Indiana 46240 USA

Ubuntu Unleashed 2010 Edition: Covering 9.10 and 10.4 Copyright © 2010 by Sams Publishing All rights reserved. No part of this book shall be reproduced, stored in a retrieval system, or transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from the publisher. No patent liability is assumed with respect to the use of the information contained herein. Although every precaution has been taken in the preparation of this book, the publisher and author assume no responsibility for errors or omissions. Nor is any liability assumed for damages resulting from the use of the information contained herein. ISBN-13: 978-0-67233-109-1 ISBN-10: 0-67233-109-8 Library of Congress Cataloging-in-Publication data is on file. Printed in the United States of America First Printing January 2010

Trademarks All terms mentioned in this book that are known to be trademarks or service marks have been appropriately capitalized. Sams Publishing cannot attest to the accuracy of this information. Use of a term in this book should not be regarded as affecting the validity of any trademark or service mark.

Warning and Disclaimer Every effort has been made to make this book as complete and as accurate as possible, but no warranty or fitness is implied. The information provided is on an “as is” basis. The authors and the publisher shall have neither liability nor responsibility to any person or entity with respect to any loss or damages arising from the information contained in this book or from the use of the CD or programs accompanying it.

Bulk Sales Sams Publishing offers excellent discounts on this book when ordered in quantity for bulk purchases or special sales. For more information, please contact: U.S. Corporate and Government Sales 1-800-382-3419 [email protected] For sales outside of the U.S., please contact: International Sales [email protected]

Acquisitions Editor Debra Williams Cauley Development Editor Michael Thurston Managing Editor Patrick Kanouse Project Editor Jennifer Gallant Copy Editor Paula Lowell Indexer Tim Wright Proofreader Leslie Joseph Technical Editor Dallas Releford Publishing Coordinator Kim Boedigheimer Multimedia Developer Dan Scherf Cover and Interior Designer Gary Adair Composition Mark Shirar

Contents at a Glance Introduction Part I

1

Installation and Configuration

1

Installing Ubuntu..........................................................................................11

2

Post-Installation Configuration ....................................................................25

3

Working with Gnome ...................................................................................51

4

Command Line Quickstart ...........................................................................79

Part II

Desktop Ubuntu

5

On the Internet ...........................................................................................113

6

Productivity Applications ...........................................................................133

7

Multimedia Applications ............................................................................153

8

Printing with Ubuntu .................................................................................185

9

Games..........................................................................................................197

Part III

System Administration

10

Managing Users...........................................................................................209

11

Automating Tasks........................................................................................233

12

System-Monitoring Tools............................................................................289

13

Backing Up ..................................................................................................301

14

Networking..................................................................................................325

15

Remote Access with SSH and Telnet...........................................................371

Part IV

Ubuntu as a Server

16

File and Print...............................................................................................381

17

Apache Web Server Management ...............................................................407

18

Remote File Serving with FTP .....................................................................439

19

Handling Electronic Mail............................................................................471

20

Proxying and Reverse Proxying ..................................................................489

21

Administering Database Services ................................................................499

22

LDAP............................................................................................................525

Part V

Programming Linux

23

Using Perl ....................................................................................................537

24

Working with Python .................................................................................561

25

Writing PHP Scripts.....................................................................................579

26

C/C++ Programming Tools for Ubuntu......................................................613

27

Mono ...........................................................................................................625

Part VI

Ubuntu Housekeeping

28

Securing Your Machines .............................................................................639

29

Performance Tuning....................................................................................651

30

Command Line Masterclass........................................................................663

31

Managing Software .....................................................................................689

32

Kernel and Module Management...............................................................701

Part VII

Appendixes

A

Ubuntu Under the Hood ............................................................................727

B

Installation Resources .................................................................................737

C

Ubuntu and Linux Internet Resources .......................................................759 Index ...........................................................................................................769

Table of Contents Introduction Part I 1

1

Installation and Configuration Installing Ubuntu

11

Before You Begin the Installation.................................................................11 Researching Your Hardware Specifications .........................................12 Installation Options.............................................................................12 Planning Partition Strategies ...............................................................12 The Boot Loader ..................................................................................13 Installing from CD or DVD .................................................................13 Step-by-Step Installation ...............................................................................13 Starting the Install ...............................................................................14 First Update..........................................................................................20 Wubi—The Easy Installer for Windows ..............................................22 Shutting Down ....................................................................................24 Reference .......................................................................................................24 2

Post-Installation Configuration

25

Troubleshooting Post-Installation Configuration Problems ........................26 The sudo command ......................................................................................27 First Update ...................................................................................................28 Configuring Software Repositories ...............................................................30 Installing Graphics Drivers ...........................................................................33 Changing Ubuntu’s Look and Feel...............................................................34 Changing the Desktop Background ....................................................34 Changing Colors..................................................................................35 Modifying System Fonts ......................................................................36 Changing How Menus Look ...............................................................36 Visual Effects........................................................................................37 Preferred Behaviors .......................................................................................37 Preferred Applications .........................................................................37 Removable Drives and Media..............................................................39 Input Devices ................................................................................................39 Keyboard Shortcuts..............................................................................40 Keyboard Layout..................................................................................40 Mouse...................................................................................................41 Detecting and Configuring a Modem ..........................................................42 Configuring a Serial-Port Modem .......................................................42 Configuring WinModems for Laptops ................................................42

vi

Ubuntu Unleashed 2008 Edition

Configuring Power Management in Ubuntu ...............................................43 Setting the Date and Time............................................................................44 Using the date Command ...................................................................45 Using the hwclock Command ............................................................45 Changing the Time and Date..............................................................46 Configuring and Using CD, DVD, and CD-RW Drives................................46 Checking Drive Assignment................................................................47 Configuring Wireless Networks ....................................................................48 Reference .......................................................................................................49 3

Working with Gnome

51

The Gnome Desktop Environment ..............................................................52 Gnome: The GNU Network Object Model Environment...................52 Eye Candy for the Masses .............................................................................54 Basic X Concepts...........................................................................................55 Using X..........................................................................................................56 Elements of the xorg.conf File ............................................................57 Configuring X......................................................................................62 Starting X ......................................................................................................64 Using a Display Manager.....................................................................65 Changing Window Managers..............................................................73 KDE—The Other Environment.....................................................................77 XFce...............................................................................................................78 Reference .......................................................................................................78 4

Command Line Quickstart

79

What Is the Command Line? .......................................................................79 Navigating Through the File System...................................................83 Managing Files with the Shell .............................................................85 Working with Compressed Files..........................................................86 Use Essential Commands from the /bin and /sbin Directories ..........87 Use and Edit Files in the /etc Directory ..............................................87 Protect the Contents of User Directories—/home ..............................87 Use the Contents of the /proc Directory to Interact with the Kernel..................................................................................87 Work with Shared Data in the /usr Directory.....................................89 Temporary File Storage in the /tmp Directory....................................89 Access Variable Data Files in the /var Directory .................................89 Logging In to and Working with Linux .......................................................90 Text-based Console Login....................................................................90 Logging Out .........................................................................................90

Contents

vii

Logging In and Out from a Remote Computer ..................................91 Using Environment Variables..............................................................92 Using the Text Editors ..................................................................................95 Working with vi...................................................................................96 Working with emacs............................................................................97 Working with Permissions ............................................................................99 Assigning Permissions .......................................................................100 Directory Permissions ........................................................................101 Understanding Set User ID and Set Group ID Permissions ..............103 Working as Root..........................................................................................104 Creating Users....................................................................................105 Deleting Users....................................................................................106 Shutting Down the System ...............................................................106 Rebooting the System........................................................................107 Reading Documentation.............................................................................108 Using Man Pages................................................................................108 Reference .....................................................................................................110 Part II 5

Desktop Ubuntu On the Internet

113

Getting Started with Firefox .......................................................................114 Choosing an Email Client ..........................................................................115 Evolution ...........................................................................................116 Mozilla Thunderbird..........................................................................118 KMail..................................................................................................120 Other Mail Clients .............................................................................120 RSS Readers..................................................................................................120 Firefox ................................................................................................122 Liferea.................................................................................................122 Instant Messaging with Pidgin ...................................................................123 Internet Relay Chat.....................................................................................124 Usenet Network Newsgroups......................................................................127 The Pan News Client Newsreader...............................................................128 Videoconferencing with Ekiga....................................................................130 Reference .....................................................................................................132 6

Productivity Applications

133

Introducing OpenOffice.org .......................................................................134 Configuring OpenOffice.org .............................................................136 Working with OpenOffice.org Writer ...............................................137 Working with OpenOffice.org Calc...................................................140

viii


Office Suites for Ubuntu .............................................................................144 Working with Gnome Office.............................................................146 Working with KOffice........................................................................149 Productivity Applications Written for Microsoft Windows .......................150 Reference .....................................................................................................152 7

Multimedia Applications

153

Sound and Music ........................................................................................153 Sound Cards.......................................................................................154 Adjusting Volume ..............................................................................155 Sound Formats ...................................................................................156 Listening to Music .............................................................................157 Graphics Manipulation...............................................................................163 The GNU Image Manipulation Program...........................................163 Using Scanners in Ubuntu ................................................................164 Working with Graphics Formats .......................................................166 Capturing Screen Images ...................................................................168 Using Digital Cameras with Ubuntu ..........................................................168 Handheld Digital Cameras ................................................................168 Using F-Spot.......................................................................................169 Burning CDs and DVDs in Ubuntu............................................................170 Creating CDs and DVDs with Ubuntu’s Graphical Clients..............172 Creating CDs from the Command Line ...........................................174 Creating DVDs from the Command Line.........................................176 Viewing Video .............................................................................................178 TV and Video Hardware ....................................................................178 Video Formats ....................................................................................180 Viewing Video in Linux.....................................................................181 Personal Video Recorders ..................................................................181 DVD and Video Players .....................................................................182 Reference .....................................................................................................182 8

Printing with Ubuntu

185

Overview of Ubuntu Printing.....................................................................185 Configuring and Managing Print Services .................................................187 GUI-Based Printer Configuration Quickstart ....................................187 Managing Printing Services ...............................................................188 Creating and Configuring Local Printers ...................................................189 Creating the Print Queue ..................................................................190 Editing Printer Settings......................................................................192 Reference .....................................................................................................195

Contents

9

Games

ix

197

Linux Gaming .............................................................................................197 Installing Proprietary Video Drivers..................................................198 Installing Games in Ubuntu .......................................................................199 DOOM 3 ............................................................................................200 Unreal Tournament 2004 ..................................................................201 Quake 4 ..............................................................................................202 Wolfenstein: Enemy Territory ...........................................................203 Battle for Wesnoth.............................................................................204 Playing Windows Games with Cedega.......................................................204 Reference .....................................................................................................205 Part III 10

System Administration Managing Users

209

User Accounts .............................................................................................209 The Super User/Root User .................................................................210 User IDs and Group IDs ....................................................................212 File Permissions .................................................................................212 Managing Groups .......................................................................................213 Group Management Tools.................................................................214 Managing Users...........................................................................................216 User Management Tools ....................................................................216 Adding New Users .............................................................................218 Monitoring User Activity on the System ..........................................219 Managing Passwords ...................................................................................220 System Password Policy .....................................................................220 The Password File ..............................................................................220 Shadow Passwords .............................................................................221 Managing Password Security for Users..............................................223 Changing Passwords in a Batch ........................................................224 Granting System Administrator Privileges to Regular Users......................224 Temporarily Changing User Identity with the su Command ..........225 Granting Root Privileges on Occasion—The sudo Command .........227 Disk Quotas .................................................................................................229 Implementing Quotas .......................................................................230 Manually Configuring Quotas ..........................................................230 Reference .....................................................................................................232

x


11

Automating Tasks

233

Running Services at Bootup........................................................................234 Beginning the Boot Loading Process ..........................................................234 Loading the Linux Kernel..................................................................235 System Services and Runlevels ..........................................................236 Runlevel Definitions..........................................................................236 Booting into the Default Runlevel ....................................................237 Booting to a Non-Default Runlevel with GRUB ...............................237 Understanding init Scripts and the Final Stage of Initialization......238 Controlling Services at Boot with Administrative Tools ..................239 Changing Runlevels...........................................................................240 Troubleshooting Runlevel Problems .................................................240 Starting and Stopping Services Manually...................................................241 Scheduling Tasks .........................................................................................242 Using at and batch to Schedule Tasks for Later ................................242 Using cron to Run Jobs Repeatedly...................................................245 Basic Shell Control......................................................................................248 The Shell Command Line .................................................................248 Shell Pattern-Matching Support ........................................................250 Redirecting Input and Output...........................................................251 Piping Data ........................................................................................252 Background Processing ......................................................................252 Writing and Executing a Shell Script..........................................................253 Running the New Shell Program.......................................................254 Storing Shell Scripts for Systemwide Access......................................255 Interpreting Shell Scripts Through Specific Shells ............................256 Using Variables in Shell Scripts .........................................................258 Assigning a Value to a Variable .........................................................258 Accessing Variable Values ..................................................................259 Positional Parameters ........................................................................259 A Simple Example of a Positional Parameter ....................................259 Using Positional Parameters to Access and Retrieve Variables from the Command Line ................................................260 Using a Simple Script to Automate Tasks..........................................261 Built-In Variables ...............................................................................263 Special Characters..............................................................................263 Use Double Quotes to Resolve Variables in Strings with Embedded Spaces ............................................................................264 Using Single Quotes to Maintain Unexpanded Variables ................265 Using the Backslash as an Escape Character.....................................266 Using the Backtick to Replace a String with Output ........................266 Comparison of Expressions in pdksh and bash................................267

Contents

xi

Comparing Expressions with tcsh.....................................................272 The for Statement ..............................................................................276 The while Statement..........................................................................277 The until Statement...........................................................................279 The repeat Statement (tcsh) ..............................................................280 The select Statement (pdksh) ............................................................280 The shift Statement ...........................................................................281 The if Statement ................................................................................281 The case Statement ............................................................................283 The break and exit Statements ..........................................................285 Using Functions in Shell Scripts........................................................285 Reference .....................................................................................................287 12

System-Monitoring Tools

289

Console-Based Monitoring .........................................................................289 Using the kill Command to Control Processes.................................291 Using Priority Scheduling and Control.............................................292 Displaying Free and Used Memory with free ...................................294 Disk Space ..........................................................................................295 Disk Quotas........................................................................................296 Graphical Process and System Management Tools ....................................296 KDE Process- and System-Monitoring Tools ..............................................298 Reference .....................................................................................................299 13

Backing Up

301

Choosing a Backup Strategy .......................................................................301 Why Data Loss Occurs.......................................................................302 Assessing Your Backup Needs and Resources ....................................303 Evaluating Backup Strategies .............................................................304 Making the Choice ............................................................................307 Choosing Backup Hardware and Media .....................................................307 Removable Storage Media .................................................................308 Network Storage.................................................................................309 Tape Drive Backup .............................................................................309 Using Backup Software ...............................................................................310 tar: The Most Basic Backup Tool .......................................................310 The GNOME File Roller .....................................................................312 Using the Amanda Backup Application ............................................315 Alternative Backup Software..............................................................316 Copying Files...............................................................................................316 Copying Files Using tar .....................................................................317 Compressing, Encrypting, and Sending tar Streams ........................317

xii


Copying Files Using cp......................................................................318 Copying Files Using mc.....................................................................318 System Rescue .............................................................................................319 The Ubuntu Rescue Disc....................................................................320 Backing Up and Restoring the Master Boot Record..........................320 Booting the System from a Generic Boot Floppy .............................320 Using a GRUB Boot Floppy ...............................................................321 Using the Recovery Facility ...............................................................322 Reference .....................................................................................................322 14

Networking

325

Laying the Foundation: The localhost Interface........................................326 Checking for the Availability of the Loopback Interface .................326 Configuring the Loopback Interface Manually ................................326 Networking with TCP/IP.............................................................................328 TCP/IP Addressing .............................................................................329 Using IP Masquerading in Ubuntu ...................................................331 Ports ...................................................................................................332 Network Organization ................................................................................333 Subnetting..........................................................................................333 Subnet Masks .....................................................................................334 Broadcast, Unicast, and Multicast Addressing ..................................334 Hardware Devices for Networking..............................................................335 Network Interface Cards....................................................................335 Network Cable ...................................................................................337 Hubs and Switches.............................................................................338 Routers and Bridges ...........................................................................339 Initializing New Network Hardware..................................................339 Using Network Configuration Tools...........................................................342 Command-Line Network Interface Configuration ...........................342 Network Configuration Files .............................................................347 Using Graphical Configuration Tools ...............................................349 Dynamic Host Configuration Protocol ......................................................351 How DHCP Works .............................................................................351 Activating DHCP at Installation and Boot Time ..............................352 DHCP Software Installation and Configuration ...............................353 Using DHCP to Configure Network Hosts ........................................354 Other Uses for DHCP.........................................................................357 Wireless Networking ...................................................................................357 Support for Wireless Networking in Ubuntu ....................................357 Advantages of Wireless Networking..................................................358 Choosing from Among Available Wireless Protocols .......................359

Contents

xiii

Beyond the Network and onto the Internet ..............................................360 Common Configuration Information ........................................................360 Configuring Digital Subscriber Line Access................................................362 Understanding Point-to-Point Protocol over Ethernet .....................363 Configuring a PPPoE Connection Manually.....................................363 Configuring Dial-Up Internet Access .........................................................365 Configuring a Dial-Up Connection Manually ..................................365 Troubleshooting Connection Problems .....................................................368 Reference .....................................................................................................369 15

Remote Access with SSH and Telnet

371

Setting Up a Telnet Server...........................................................................371 Telnet Versus SSH ........................................................................................372 Setting Up an SSH Server ............................................................................372 The SSH Tools..............................................................................................373 Using scp to Copy Individual Files Between Machines....................374 Using sftp to Copy Many Files Between Machines ..........................374 Using ssh-keygen to Enable Key-based Logins..................................375 Remote X.....................................................................................................377 XDMCP ..............................................................................................377 VNC....................................................................................................378 Reference .....................................................................................................378 Part IV 16

Ubuntu as a Server File and Print

381

Using the Network File System...................................................................382 Installing and Starting or Stopping NFS ...........................................382 NFS Server Configuration ..................................................................383 NFS Client Configuration..................................................................384 Putting Samba to Work...............................................................................385 Manually Configuring Samba with /etc/samba/smb.conf................387 Testing Samba with the testparm Command ...................................390 Starting the smbd Daemon ...............................................................390 Mounting Samba Shares ....................................................................391 Configuring Samba Using SWAT.......................................................392 Network and Remote Printing with Ubuntu..............................................397 Creating Network Printers ..........................................................................397 Enabling Network Printing on a LAN ...............................................397 Session Message Block Printing .........................................................398 Using the Common UNIX Printing System GUI .......................................399 Creating a CUPS Printer Entry ..........................................................400

xiv


Avoiding Printer Support Problems............................................................403 All-in-One (Print/Fax/Scan) Devices .................................................403 Using USB and Legacy Printers .........................................................403 Reference .....................................................................................................405 17

Apache Web Server Management

407

About the Apache Web Server ....................................................................407 Installing the Apache Server.......................................................................409 Installing with APT............................................................................409 Building the Source Yourself .............................................................410 Starting and Stopping Apache ....................................................................413 Starting the Apache Server Manually................................................413 Using /etc/init.d/apache2 ..................................................................414 Runtime Server Configuration Settings......................................................416 Runtime Configuration Directives ....................................................416 Editing apache2.conf .........................................................................417 Apache Multiprocessing Modules .....................................................419 Using .htaccess Configuration Files ..................................................420 File System Authentication and Access Control ........................................422 Restricting Access with allow and deny............................................422 Authentication...................................................................................423 Final Words on Access Control .........................................................425 Apache Modules..........................................................................................426 mod_access ........................................................................................427 mod_alias ...........................................................................................427 mod_asis ............................................................................................427 mod_auth...........................................................................................428 mod_auth_anon.................................................................................428 mod_auth_dbm .................................................................................428 mod_auth_digest ...............................................................................428 mod_autoindex..................................................................................429 mod_cgi..............................................................................................429 mod_dir and mod_env ......................................................................429 mod_expires.......................................................................................429 mod_headers......................................................................................429 mod_include ......................................................................................429 mod_info and mod_log_config .........................................................430 mod_mime and mod_mime_magic ..................................................430 mod_negotiation ...............................................................................430 mod_proxy.........................................................................................430 mod_rewrite .......................................................................................430 mod_setenvif .....................................................................................430

Contents

xv

mod_speling.......................................................................................431 mod_status.........................................................................................431 mod_ssl ..............................................................................................431 mod_unique_id..................................................................................431 mod_userdir .......................................................................................431 mod_usertrack....................................................................................431 mod_vhost_alias ................................................................................431 Virtual Hosting............................................................................................432 Address-Based Virtual Hosts ..............................................................432 Name-Based Virtual Hosts .................................................................432 Logging........................................................................................................434 Other Web Servers for Use with Ubuntu....................................................435 Sun ONE Web Server .........................................................................436 Zope ...................................................................................................436 Zeus Web Server.................................................................................436 Reference .....................................................................................................437 18

Remote File Serving with FTP

439

Choosing an FTP Server..............................................................................439 Choosing an Authenticated or Anonymous Server ..........................440 Ubuntu FTP Server Packages .............................................................440 Other FTP Servers ..............................................................................440 Installing FTP Software ...............................................................................441 The FTP User ...............................................................................................442 inetd Configuration for wu-ftpd ................................................................444 Starting the Very Secure FTP Server (vsftpd) Package .......................445 Configuring the Very Secure FTP Server.....................................................445 Controlling Anonymous Access ........................................................445 Other vsftpd Server Configuration Files ...........................................446 Configuring the Server ...............................................................................448 Using Commands in the ftpaccess File to Configure wu-ftpd...................448 Configure Access Control..................................................................449 Configure User Information..............................................................452 Configure System Logging ................................................................456 Configure Permission Control ..........................................................457 Configure Commands Directed Toward the cdpath.........................459 Structure of the shutdown File..........................................................460 Configuring FTP Server File-Conversion Actions.......................................460 Strip Prefix .........................................................................................461 Strip Postfix........................................................................................461 Add-On Prefix ....................................................................................461 Add-On Postfix ..................................................................................461

xvi


External Command ...........................................................................461 An Example of Conversions in Action..............................................462 Using the ftphosts File to Allow or Deny FTP Server Connection ............463 Using Commands for Server Administration.............................................464 Display Information About Connected Users...................................464 Count the Number of Connections ..................................................465 Use /usr/sbin/ftpshut to Schedule FTP Server Downtime ................466 Use /var/log/xferlog to View a Log of Server Transactions...............467 Reference .....................................................................................................470 19

Handling Electronic Mail

471

How Email Is Sent and Received ................................................................471 The Mail Transport Agent..................................................................472 Choosing an MTA..............................................................................474 The Mail Delivery Agent ...................................................................474 The Mail User Agent ..........................................................................475 Basic Postfix Configuration and Operation ...............................................476 Configuring Masquerading ...............................................................477 Using Smart Hosts .............................................................................477 Setting Message Delivery Intervals....................................................477 Mail Relaying .....................................................................................478 Forwarding Email with Aliases ..........................................................478 Using Fetchmail to Retrieve Mail ...............................................................479 Installing Fetchmail...........................................................................479 Configuring Fetchmail ......................................................................480 Choosing a Mail Delivery Agent ................................................................483 Procmail .............................................................................................483 Spamassassin......................................................................................484 Squirrelmail........................................................................................484 Virus Scanners....................................................................................484 Mail Daemons .............................................................................................485 Alternatives to Microsoft Exchange Server.................................................485 Microsoft Exchange Server/Outlook Client ......................................486 CommuniGate Pro.............................................................................486 Oracle Collaboration Suite ................................................................486 Bynari.................................................................................................486 Open-Xchange ...................................................................................486 phpgroupware....................................................................................487 PHProjekt ...........................................................................................487 Horde .................................................................................................487 Reference .....................................................................................................488

Contents

20

Proxying and Reverse Proxying

xvii

489

What Is a Proxy Server? ..............................................................................489 Installing Squid ...........................................................................................490 Configuring Clients ....................................................................................490 Access Control Lists ....................................................................................491 Specifying Client IP Addresses....................................................................495 Example Configurations .............................................................................496 Reference .....................................................................................................498 21

Administering Database Services

499

A Brief Review of Database Basics ..............................................................500 How Relational Databases Work .......................................................501 Understanding SQL Basics.................................................................503 Creating Tables ..................................................................................503 Inserting Data into Tables .................................................................504 Retrieving Data from a Database.......................................................505 Choosing a Database: MySQL Versus PostgreSQL......................................507 Speed ..................................................................................................507 Data Locking......................................................................................508 ACID Compliance in Transaction Processing to Protect Data Integrity .................................................................509 SQL Subqueries ..................................................................................509 Procedural Languages and Triggers ...................................................510 Configuring MySQL ....................................................................................510 Setting a Password for the MySQL Root User ...................................511 Creating a Database in MySQL .........................................................511 Granting and Revoking Privileges in MySQL ...................................512 Configuring PostgreSQL .............................................................................513 Initializing the Data Directory in PostgreSQL ..................................514 Creating a Database in PostgreSQL ...................................................515 Creating Database Users in PostgreSQL ............................................516 Deleting Database Users in PostgreSQL ............................................517 Granting and Revoking Privileges in PostgreSQL .............................517 Database Clients..........................................................................................518 SSH Access to a Database...................................................................518 Local GUI Client Access to a Database .............................................520 Web Access to a Database..................................................................520 The MySQL Command-Line Client ..................................................521 The PostgreSQL Command-Line Client ............................................523 Graphical Clients ...............................................................................523 Reference .....................................................................................................524

xviii


22

LDAP

525

Configuring the Server ...............................................................................526 Populating Your Directory.................................................................528 Configuring Clients ....................................................................................530 Evolution ...........................................................................................531 Thunderbird.......................................................................................532 Administration ............................................................................................532 Reference .....................................................................................................533 Part V 23

Programming Linux Using Perl

537

Using Perl with Linux .................................................................................537 Perl Versions ......................................................................................538 A Simple Perl Program.......................................................................538 Perl Variables and Data Structures..............................................................540 Perl Variable Types.............................................................................540 Special Variables.................................................................................541 Operators.....................................................................................................542 Comparison Operators ......................................................................542 Compound Operators........................................................................543 Arithmetic Operators .........................................................................544 Other Operators .................................................................................544 Special String Constants ....................................................................545 Conditional Statements: if/else and unless ................................................545 if .........................................................................................................546 unless .................................................................................................546 Looping .......................................................................................................547 for.......................................................................................................547 foreach ...............................................................................................547 while ..................................................................................................548 until ...................................................................................................548 last and next ......................................................................................548 do ... while and do ... until ...............................................................549 Regular Expressions.....................................................................................549 Access to the Shell ......................................................................................550 Modules and CPAN .....................................................................................551 Code Examples............................................................................................552 Sending Mail ......................................................................................552 Purging Logs ......................................................................................554 Posting to Usenet...............................................................................555

Contents

xix

One-Liners .........................................................................................556 Command-Line Processing................................................................556 Reference .....................................................................................................557 24

Working with Python

561

Python on Linux.........................................................................................561 Getting Interactive.............................................................................562 The Basics of Python...................................................................................563 Numbers.............................................................................................563 More on Strings .................................................................................564 Lists ....................................................................................................567 Dictionaries........................................................................................569 Conditionals and Looping ................................................................570 Functions.....................................................................................................572 Object Orientation......................................................................................573 Class and Object Variables ................................................................574 Constructors and Destructors............................................................575 Class Inheritance ...............................................................................575 The Standard Library and the Vaults of Parnassus ....................................577 Reference .....................................................................................................577 25

Writing PHP Scripts

579

Introduction to PHP ...................................................................................580 Entering and Exiting PHP Mode .......................................................580 Variables.............................................................................................580 Arrays .................................................................................................582 Constants ...........................................................................................584 References ..........................................................................................584 Comments .........................................................................................585 Escape Sequences ...............................................................................585 Variable Substitution .........................................................................587 Operators ...........................................................................................587 Conditional Statements.....................................................................589 Special Operators ...............................................................................591 Switching ...........................................................................................592 Loops..................................................................................................593 Including Other Files.........................................................................596 Basic Functions ...........................................................................................596 Strings ................................................................................................596 Arrays .................................................................................................600 Files ....................................................................................................602 Miscellaneous.....................................................................................604

xx


Handling HTML Forms ...............................................................................607 Databases.....................................................................................................608 Introduction to PEAR::DB .................................................................608 Reference .....................................................................................................610 26

C/C++ Programming Tools for Ubuntu

613

Programming in C with Linux ...................................................................613 Using the C Programming Project Management Tools Provided with Ubuntu..............................................................................614 Building Programs with make ...........................................................615 Using Makefiles..................................................................................615 Using the autoconf Utility to Configure Code .................................617 Managing Software Projects with Subversion ...................................617 Debugging Tools ................................................................................618 Using the GNU C Compiler .......................................................................619 Graphical Development Tools ....................................................................620 Using the KDevelop Client................................................................620 The Glade Client for Developing in GNOME...................................621 Reference .....................................................................................................623 27

Mono

625

Why Use Mono? .........................................................................................625 Mono on the Command Line ....................................................................626 The Structure of a C# Program..........................................................628 Printing Out the Parameters..............................................................629 Creating Your Own Variables ............................................................629 Adding Some Error Checking ............................................................630 Building on Mono’s Libraries .....................................................................631 Searching with Beagle........................................................................631 Creating a GUI with Gtk# .................................................................634 Reference .....................................................................................................636 Part VI 28

Ubuntu Housekeeping Securing Your Machines

639

Understanding Computer Attacks ..............................................................639 Assessing Your Vulnerability.......................................................................641 Protecting Your Machine ............................................................................642 Securing a Wireless Network .............................................................642 Passwords and Physical Security .......................................................643 Configuring and Using Tripwire .......................................................644 Devices ...............................................................................................645

Contents

xxi

Viruses .........................................................................................................645 Configuring Your Firewall...........................................................................646 Forming a Disaster Recovery Plan ..............................................................647 Keeping Up-to-Date on Linux Security Issues ............................................648 Reference .....................................................................................................649 29

Performance Tuning

651

Hard Disk ....................................................................................................651 Using the BIOS and Kernel to Tune the Disk Drives ........................652 The hdparm Command.....................................................................653 File System Tuning ............................................................................654 The tune2fs Command......................................................................654 The e2fsck Command........................................................................655 The badblocks Command .................................................................655 Disabling File Access Time.................................................................655 Kernel ..........................................................................................................655 Apache.........................................................................................................656 MySQL.........................................................................................................658 Measuring Key Buffer Usage..............................................................658 Using the Query Cache .....................................................................660 Miscellaneous Tweaks........................................................................661 Query Optimization ..........................................................................661 Reference .....................................................................................................662 30

Command Line Masterclass

663

Why Use the Shell?.....................................................................................664 Basic Commands.........................................................................................665 Printing the Contents of a File with cat ...........................................666 Changing Directories with cd ...........................................................667 Changing File Access Permissions with chmod................................668 Copying Files with cp........................................................................669 Printing Disk Usage with du .............................................................669 Finding Files by Searching with find ................................................670 Searches for a String in Input with grep ...........................................673 Paging Through Output with less .....................................................674 Creating Links Between Files with ln................................................676 Finding Files from an Index with locate...........................................677 Listing Files in the Current Directory with ls ...................................678 Reading Manual Pages with man ......................................................679 Making Directories with mkdir .........................................................680 Moving Files with mv........................................................................680 Listing Processes with ps ...................................................................680

xxii


Deleting Files and Directories with rm .............................................681 Printing the Last Lines of a File with tail..........................................682 Printing Resource Usage with top .....................................................682 Printing the Location of a Command with which...........................684 Combining Commands ..............................................................................684 Multiple Terminals......................................................................................686 Reference .....................................................................................................687 31

Managing Software

689

Using Add/Remove Applications for Software Management.....................689 Using Synaptic for Software Management .................................................691 Staying Up-to-Date......................................................................................693 Working on the Command Line ................................................................694 Day-to-Day Usage ..............................................................................694 Finding Software................................................................................697 Compiling Software from Source ...............................................................698 Reference .....................................................................................................699 32

Kernel and Module Management

701

The Linux Kernel ........................................................................................702 The Linux Source Tree .......................................................................702 Types of Kernels.................................................................................704 Managing Modules .....................................................................................706 When to Recompile ....................................................................................708 Kernel Versions ...........................................................................................708 Obtaining the Kernel Sources .....................................................................709 Patching the Kernel ....................................................................................710 Compiling the Kernel .................................................................................712 Using xconfig to Configure the Kernel.............................................717 Creating an Initial RAM Disk Image .................................................720 When Something Goes Wrong...................................................................721 Errors During Compile ......................................................................721 Runtime Errors, Boot Loader Problems, and Kernel Oops ...............722 Reference .....................................................................................................723 Part VII A

Appendixes Ubuntu Under the Hood

727

What Is Linux?............................................................................................727 Why Use Linux?..........................................................................................729 What Is Ubuntu?.........................................................................................730 Roots of Ubuntu ................................................................................730

Contents

xxiii

Ubuntu for Business....................................................................................731 Ubuntu in Your Home ................................................................................732 64-Bit Ubuntu .............................................................................................733 Ubuntu on the PPC Platform .....................................................................733 Getting the Most from Ubuntu and Linux Documentation .....................733 Ubuntu Developers and Documentation ...................................................735 Reference .....................................................................................................735 B

Installation Resources

737

Planning Your Ubuntu Deployment ..........................................................738 Business Considerations ....................................................................738 System Considerations ......................................................................741 User Considerations...........................................................................742 A Predeployment Planning Checklist ...............................................742 Planning the Installation...................................................................742 Hardware Requirements..............................................................................743 Meeting the Minimum Ubuntu Hardware Requirements ................743 Using Legacy Hardware .....................................................................744 Planning for Hard Drive Storage for Your Ubuntu Installation .......744 Checking Hardware Compatibility ...................................................745 Preparing for Potential Hardware Problems......................................746 Preparing and Using a Hardware Inventory .....................................749 Preparing for the Install Process .................................................................750 Preparing to Install from a CD-ROM ................................................753 Partitioning Before and During Installation ..............................................754 Choosing a Partitioning Scheme.......................................................756 Hosting Parts of the Linux File System on Separate Partitions ........756 Reference .....................................................................................................757 C

Ubuntu and Linux Internet Resources

759

Websites and Search Engines ......................................................................760 Web Search Tips.................................................................................760 Google Is Your Friend ........................................................................761 Ubuntu Package Listings ...................................................................761 Certification .......................................................................................761 Commercial Support..........................................................................762 Documentation..................................................................................762 Linux Guides......................................................................................763 Ubuntu...............................................................................................763 Mini-CD Linux Distributions ............................................................763 Various Intel-Based Linux Distributions ...........................................764

xxiv


PowerPC-Based Linux Distributions..................................................764 Linux on Laptops and PDAs..............................................................765 The X Window System ......................................................................765 Usenet Newsgroups.....................................................................................765 Mailing Lists................................................................................................767 Ubuntu Project Mailing Lists.............................................................767 Internet Relay Chat.....................................................................................767 Index

769

About the Authors Andrew Hudson is a freelance journalist who specializes in writing about Linux. He has significant experience in Red Hat and Debian-based Linux distributions and deployments and can often be found sitting at his keyboard tweaking various settings and config files just for the hell of it. He lives in Wiltshire, which is a county of England, along with his wife, Bernice, and their son, John. Andrew does not like Emacs. He can be reached at [email protected]. Paul Hudson is a recognized expert in open-source technologies. He is also a professional developer and full-time journalist for Future Publishing. His articles have appeared in Mac Format, PC Answers, PC Format, PC Plus, and Linux Format. Paul is passionate about free software in all its forms and uses a mix of Linux and BSD to power his desktops and servers. Paul likes Emacs. Paul can be contacted through http://hudzilla.org. Matthew Helmke has written articles for magazines such as Linux+ and Linux Identity. He cowrote Prentice Hall's The Official Ubuntu Book and O'Reilly's VMware Cookbook. He has also self published two books about Moroccan culture. Matthew is an active member of the Ubuntu Linux community as an administrator and Forum Council member for the Ubuntu Forums (http://ubuntuforums.org), and a member of the membership approval committee for Ubuntu in Europe, the Middle East, and Africa. He is currently a graduate student at the University of Arizona. You can find out more about Matthew at http://matthewhelmke.com. Ryan Troy has more than 12 years of Unix/Linux system administration experience in industries ranging from web hosting to newspapers. He serves as technical administrator and chairman of the Ubuntu Forum Council and founded the Ubuntu Forums in 2004. He currently works for a Michigan based consulting company and specializes in Storage and Virtualization. You can find out more about Ryan at http://rtroy.com.

Dedication To Bernice and John—the best supporters a man could ever wish for. —Andrew Hudson To World Peace—because this is about as close as I'm ever going to get to being in the Miss World competition. —Paul Hudson To Heather, Saralyn, Sedona and Philip—the most amazing family a guy could hope for. —Matthew Helmke To Holly, thanks for your continued support during projects I get involved with. —Ryan Troy

Acknowledgments Thanks to our colleagues at Sams Publishing, whose patience and persistence made this book possible. Thanks also to my family who have supported me during the writing of this book. My son John now has his own keyboard and mouse—the computer will come in a few years! My wife Bernice has the patience of a saint, allowing me to lock myself away when I needed to and being helpful when I’ve hit writer’s block (and yes, it does happen!). Finally, thanks to God who makes all things possible, including this book. —Andrew Hudson Thanks to Andrew, Shelley, Damon, Seth, Dallas, Mum and Dad, my wife, Ildiko; and, of course, God, who made all this possible. No book this big could be done without a lot of work from a dedicated team! —Paul Hudson Thanks to Andrew and Paul for trusting Ryan and I with this book and to Debra for connecting us with the opportunity. Thanks to Ryan for all his great work as well as all the staff at Sams. Continuing the tradition of this book's original authors, I also think God is pretty cool and that he deserves a shout out. —Matthew Helmke Thanks to Andrew and Paul for setting the foundation for this book, allowing Matthew and I the opportunity expand and update it. Thank you Matthew for asking me to collaborate with you on this project, you are a good friend. And finally, to the Ubuntu Forums community and staff, you guys rock! —Ryan Troy

We Want to Hear from You! As the reader of this book, you are our most important critic and commentator. We value your opinion and want to know what we’re doing right, what we could do better, what areas you’d like to see us publish in, and any other words of wisdom you’re willing to pass our way. You can email directly to let us know what you did or didn’t like about this book—as well as what we can do to make our books stronger. Please note that we cannot help you with technical problems related to the topic of this book, and that due to the high volume of mail we received, we might not be able to reply to every message. When you write, please be sure to include this book’s title and author as well as your name and email address. We will carefully review your comments and share them with the author and editors who worked on the book. Email:

[email protected]

Mail:

Debra Williams Cauley Sams Publishing 800 East 96th Street Indianapolis, IN 46240 USA

Reader Services Visit our website and register this book at informit.com/register for convenient access to any updates, downloads, or errata that might be available for this book.

This page intentionally left blank

Introduction

W

elcome to Ubuntu Unleashed, 2010 Edition! This book covers the free Linux distribution named Ubuntu and includes a fully functional and complete operating system produced by the Ubuntu Community, sponsored by Canonical Software. This book covers Ubuntu version 9.10. Ubuntu directly descends from one of the oldest and most revered Linux distributions ever: Debian. Those of you who know nothing about Linux will likely not have heard of Debian; it is enough to know that it is considered to be one of the most stable and secure Linux distributions currently available. Ubuntu benefits directly from many contributions from free software developers across the world. If you are new to Linux, you have made a great decision by choosing this book. Sams Publishing’s Unleashed books offer an in-depth look at their subject, taking in both beginner and advanced users and moving them to a new level of knowledge and expertise. Ubuntu is a fast-changing distribution that can be updated at least twice a year. We have tracked the development of Ubuntu from early on to make sure that the information in this book mirrors closely the development of the distribution. A full copy of Ubuntu is included on the enclosed disc, making it possible for you to install Linux in less than an hour! No longer an upstart, Linux now has an enviable position in today’s modern computing world. It can be found on machines as diverse as mobile phones and wristwatches, all the way up to supercomputers—in fact, Linux currently runs on more than half of the world’s top 500 supercomputers.

2

Introduction

Do not let the reputation of Linux discourage you, however. Most people who have heard of Linux think that it is found only on servers, looking after websites and email. Nothing could be further from the truth because Linux is making huge inroads in to the desktop market, too. Corporations are realizing the benefits of running a stable and powerful operating system that is easy to maintain and easy to secure. Add to that the hundreds of improvements in usability, and Linux becomes an attractive proposition that tempts many CIOs. The best part is that as large Linux vendors improve Linux, the majority of those improvements make it into freely available distributions, allowing you to benefit from the additions and refinements made. You can put Ubuntu to work today and be assured of a great user experience. This book provides all the information that you need to get up and running with Ubuntu. It even tells you how to keep Ubuntu running in top shape and how to adapt Ubuntu to changes in your own needs. You can use Ubuntu at home, in the workplace, or, with permission, at your school or college. In fact, you might want to poke around your school’s computer rooms: You will probably find that someone has already beaten you to the punch—Linux is commonly found in academic institutions. Feel free to make as many copies of the software as you want; because Ubuntu is freely distributable all over the world, no copyright lawyers are going to pound on your door. After an introduction to Linux and Ubuntu, you will find out how to get started with Ubuntu, including installation and initial configuration. We also take you through installing software, managing users, and other common administrative tasks. For the more technically minded, we also cover some starting steps in programming across several languages—why not pick one and try it out? Throughout this book, you will also find information about multimedia applications, digital graphics, and even gaming (for afterhours when you are finished tinkering). After you make it through this book, you will be well equipped with the knowledge needed to use Linux successfully. We do assume that you are at least familiar with an operating system already (even if it is not with Linux) and have some basic computer knowledge.

Licensing Software licensing is an important issue for all computer users and can entail moral, legal, and financial considerations. Many consumers think that purchasing a copy of a commercial or proprietary operating system, productivity application, utility, or game conveys ownership, but this is not true. In the majority of cases, the end user license agreement (EULA) included with a commercial software package states that you have paid only for the right to use the software according to specific terms. This generally means you may not examine, make copies, share, resell, or transfer ownership of the software package. More onerous software licenses enforce terms that preclude you from distributing or publishing comparative performance reviews of the software. Even more insidious licensing schemes (and supporting legislation, especially in the United States) contain provisions allowing onsite auditing of the software’s use!

What This Book Contains

3

This is not the case with the software included with this book. You are entirely free to make copies, share them with friends, and install the software on as many computers as you want—we encourage you to purchase additional copies of this book to give as gifts, however. Be sure to read the README file on the disc included with this book for important information regarding the included software and disk contents. After you install Ubuntu, go to http://www.gnu.org/licenses/gpl.html to find a copy of the GNU GPL. You will see that the GPL provides unrestricted freedom to use, duplicate, share, study, modify, improve, and even sell the software. You can put your copy of Ubuntu to work right away in your home or at your place of business without worrying about software licensing, per-seat workstation or client licenses, software auditing, royalty payments, or any other type of payments to third parties. However, be aware that although much of the software included with Ubuntu is licensed under the GPL, some packages on this book’s disc are licensed under other terms. There is a variety of related software licenses, and many software packages fall under a broad definition known as open source. Some of these include the Artistic License, the BSD License, the Mozilla Public License, and the Q Public License. For additional information about the various GNU software licenses, browse to http://www. gnu.org/. For a definition of open-source and licensing guidelines, along with links to the terms of nearly three dozen open-source licenses, browse to http://www.opensource.org/.

Who This Book Is For This book is for anyone searching for guidance on using Ubuntu and primarily focuses on Intel-based PC platforms. Although the contents are aimed at intermediate to advanced users, even new users with a bit of computer savvy will benefit from the advice, tips, tricks, traps, and techniques presented in each chapter. Pointers to more detailed or related information are also provided at the end of each chapter. If you are new to Linux, you might need to learn some new computer skills, such as how to research your computer’s hardware, how to partition a hard drive, and (occasionally) how to use a command line. This book helps you learn these skills and shows you how to learn more about your computer, Linux, and the software included with Ubuntu. System administrators with experience using other operating systems can use the information in this book to install, set up, and run common Linux software services, such as the Network File System (NFS), a File Transfer Protocol (FTP) server, and a web server (using Apache, among others).

What This Book Contains Ubuntu Unleashed is organized into seven parts, covering installation and configuration, Ubuntu on the desktop, system administration, programming and housekeeping, and a reference section. A disc containing the entire distribution is included so that you have everything you need to get started. This book starts by covering the initial and essential tasks required to get Ubuntu installed and running on a target system.

4

Introduction

If you are new to Linux, and more specifically Ubuntu, first read the chapters in Part I, “Installation and Configuration.” You will get valuable information on the following: . Detailed steps that walk you through installation . Critical advice on key configuration steps to fully install and configure Linux to work with your system’s subsystems or peripherals, such as pointers, keyboards, modems, USB devices and power management . Initial steps needed by new users transitioning from other computing environments . Working with GNOME, the default desktop environment for Ubuntu Part II, “Desktop Ubuntu,” is aimed at users who want to get productive with Ubuntu and covers the following: . Discovering the many productivity applications that come with Ubuntu . Surfing the Internet and working with email and newsgroups . Using Ubuntu to listen to music and watch video . Using Ubuntu to download and manipulate images from digital cameras . Setting up local printers for Ubuntu . Understanding the current state of gaming for Linux Moving beyond the productivity and desktop areas of Ubuntu, Part III, “System Administration,” covers the following: . Managing users and groups . Automating tasks and using shell scripts . Monitoring system resources and availability . Backup strategies and software . Network connectivity, including sharing folders and securing the network . Internet connectivity via dial-up and broadband connections Part IV, “Ubuntu as a Server” gives you the information you need to start building your own file, web and other servers for use in your home or office. . Building and deploying web servers . Database creation, management, and manipulation . File and print servers . Using FTP for serving files across the Internet and local networks . Building and deploying email servers using Postfix and managing mailing lists . Creating remote access gateways and services

Conventions Used in This Book

5

. Configuring DNS for your network . Using LDAP for storing information on users and security Part V, “Programming Linux,” provides a great introduction to how you can extend Ubuntu capabilities even further using the development tools supplied with it. This part covers the following: . Programming in Perl, using variables and scripting . An introduction to the Python language . Writing PHP scripts and linking them to databases . C and C++ programming tools available with Ubuntu and how to use the GNU C Compiler (gcc) Part VI, “Ubuntu Housekeeping,” looks at some of the more advanced skills you need to keep your system running in perfect condition, including the following: . Securing your machine against attack from outsiders and viruses . Performance tuning . Command-line masterclass . Advanced apt . Kernel and module management and compilation An extensive reference in Part VII, “Appendixes,” gives you scope to explore in even more depth some of the topics covered in this book as well as providing historical context to Ubuntu and installation resources.

Conventions Used in This Book A lot of documentation is included with every Linux distribution, and Ubuntu is certainly no exception. Although the intent of Ubuntu Unleashed is to be as complete as possible, it is impossible to cover every option of every command included in the distribution. However, this book offers numerous tables of various options, commands, and keystrokes to help condense, organize, and present information about a variety of subjects. This edition is also packed full of screenshots to illustrate nearly all Ubuntu-specific graphical utilities—especially those related to system administration or the configuration and administration of various system and network services.

Introduction

6

To help you better understand code listing examples and sample command lines, several formatting techniques are used to show input and ownership. For example, if the command or code listing example shows typed input, the input is formatted in boldface, as follows: $ ls

If typed input is required, as in response to a prompt, the sample typed input also is in boldface, like so: Delete files? [Y/n] y

All statements, variables, and text that should appear on your display use the same boldface formatting. In addition, command lines that require root or super user access are prefaced with the sudo command, as follows: $ sudo printtool &

Command-line examples that any user can run are prefaced with a dollar sign ($), like so: $ ls

The following elements provide you with useful tidbits of information that relate to the discussion of the text:

NOTE A note provides additional information you might want to make note of as you are working; augments a discussion with ancillary details; or points you to an article, a whitepaper, or another online reference for more information about a specific topic.

TIP A tip can contain special insight or a timesaving technique, as well as information about items of particular interest to you that you might not find elsewhere.

CAUTION A caution warns you about pitfalls or problems before you run a command, edit a configuration file, or choose a setting when administering your system.

Conventions Used in This Book

Sidebars Can Be Goldmines Just because it is in a sidebar does not mean that you will not find something new here. Be sure to watch for these elements that bring in outside content that is an aside to the discussion in the text. You will read about other technologies, Linux-based hardware, and special procedures to make your system more robust and efficient.

Other formatting techniques used to increase readability include the use of italics for placeholders in computer command syntax. Computer terms or concepts are also italicized upon first introduction in text. Finally, you should know that all text, sample code, and screenshots in Ubuntu Unleashed were developed using Ubuntu and open-source tools. Read on to start learning about and using the latest version of Ubuntu. Experienced users will want to consider the new information in this edition when planning or considering upgrades. There are many different Linux distributions from different vendors, but many derive from, or closely mimic, the Debian distribution.

7


PART I Installation and Configuration IN THIS PART CHAPTER 1

Installing Ubuntu

CHAPTER 2


CHAPTER 3

Working with Gnome

CHAPTER 4



CHAPTER

1

Installing Ubuntu

IN THIS CHAPTER . Before You Begin the Installation . Step-by-Step Installation . Reference

N

ot that long ago, the mere mention of installing Linux struck fear into the hearts of mortal men. Thanks to a campaign of fear, uncertainty, and doubt (commonly referred to as FUD), Linux garnered a reputation as something of an elitist operating system, only configurable by those in the know. Nowadays, it is a different story entirely, and Ubuntu is one of the easiest distros to install. In this chapter, we cover how to get started with the install disc, including booting into Ubuntu Live CD to test your system. Then we cover the actual installation of Ubuntu, looking at the various options available. The whole process is fairly pain-free under Ubuntu, as you are about to learn.

Before You Begin the Installation Installing a new operating system is a major event, and you should make sure that you have properly thought through what is going to take place. The first thing to consider is how the hardware will be affected by the software that you propose to install. Although Ubuntu will run well on an extremely wide variety of hardware, it is worthwhile checking your hardware components out because there may be a banana skin waiting for you to slip up on. The following sections provide some areas for you to investigate and think about, and may even save you hours of frustration when something goes wrong. The sections are designed to complement the ideas and checklists presented in Appendix B, “Installation Resources.” You start by researching and documenting your hardware. This information will prove helpful later on during the installation.

12

CHAPTER 1

Installing Ubuntu

Researching Your Hardware Specifications At the absolute minimum, you should know the basics of your system, such as how much RAM you have installed, what type of mouse, keyboard, and (importantly) monitor you have. Knowing the storage capacity of your hard drive is also important because it will help you plan how you will divide it up for Ubuntu. It is also a good idea to find out whether you are using SATA drivers or the more traditional PATA drives. A small detail such as whether your mouse uses the USB or PS/2 interface will ensure proper pointer configuration—something that should happen without fail, but you will be glad you knew in case something goes wrong! The more information you have, the better prepared you will be for any problems. Use the checklist shown in Table B.2 in Appendix B to inventory or at least record some basic features of your system. Items you need to know include the amount of installed memory, size of your hard drive, type of mouse, capabilities of the display monitor (such as maximum resolution), and number of installed network interfaces (if any).

Installation Options Ubuntu is available in three forms: the Ubuntu distribution, the Ubuntu server distribution, and the Ubuntu alternative distribution. For most people, the main distribution should suffice; the alternate is mainly used for upgrading existing Ubuntu users to the latest version, as well as allowing installation on low-powered systems. As for the server installation, this gives you access to a LAMP server in about 20 minutes (Linux, Apache, MySQL, and PHP), but as you will learn in this book, all these components are available to the Ubuntu default distribution.

Planning Partition Strategies Partitioning is a topic that can strike fear into the hearts of novice Linux users. Coming from a Microsoft world, where you might just be used to having one hard drive, it can seem a bit strange to use an operating system that makes partitioning important. Depending on your requirements, you may opt to have a single large partition to contain all your files or you may prefer to segment your installation across several partitions to match your individual needs. You also need to take into account such things as what you will use to back up your data. With the abundance of external hard drives and Flash-based memory sticks, you could use these; remember, however, to provision backup storage space equal to or in excess of your specific requirements. Thanks to the ever-decreasing prices of storage, you can buy a 500GB SATA drive for a little more than $100. You will thank yourself that you backed up your data when your primary hard drive goes down! The needs of the business should be the primary concern when deciding to implement a Linux system. Be careful when specifying a system and ensure that you build in an adequate upgrade path that allows you to extend the life of the system and add any additional storage or memory. Knowing how software is allocated on your hard drive for Linux involves knowing how Ubuntu organizes its file system, or layout of directories on storage media. This knowledge

Step-by-Step Installation

13

To plan the best partitioning scheme, research and know the answers to these questions: . How much disk space does your system require? . Do you expect your disk space needs to grow significantly in the future? . Will the system boot just Ubuntu, or do you need a dual-boot system? . How much data will require backup, and what backup system will work best? (See Chapter 13, “Backing Up” for more information on backing up your system.)

DVD Installation Jump-Start To install Ubuntu from the disc included with this book, you must have at least a Pentium-class CPU, 3GB of hard drive space, and 256MB RAM. Most modern systems have significantly larger drives, and it is an idea to invest in more storage from your local computer store.

The Boot Loader During installation, Ubuntu automatically installs GRUB (Grand Unified Boot Loader) to the Master Boot Record (MBR) of your hard drive. Handily enough, it also detects any other operating systems such as Windows and adds entries in GRUB as appropriate. If you have a specific requirement not to install GRUB to the MBR, you need to install using the Alternate disc, which will allow you to specify the install location for GRUB.

Installing from CD or DVD Most PCs’ BIOS support booting directly from a CD or DVD drive, and enable you to set a specific order of devices (such as floppy, hard drive, CD-ROM, or USB) to search for bootable software. Turn on your PC and set its BIOS if required (usually accessed by pressing a Function or Del key after powering on); then insert your Ubuntu disc and boot to install Ubuntu. To use this installation method, your computer must support booting from your optical drive. You can verify this by checking your BIOS and then booting your PC. Older PCs might prove problematic when you desire to boot to an install using optical media. The good news is that this should no longer be a problem with most post-1995 personal computers.

Step-by-Step Installation This section provides a basic step-by-step installation of Ubuntu from the install disc. The install process itself is fairly straightforward, and you should not encounter any real problems.

1

will help you make the most out of hard drive space; and in some instances, such as planning to have user directories mounted via NFS or other means, can help head off data loss, increase security, and accommodate future needs. Create a great system, and you’ll be the hero of information services.

14

CHAPTER 1

Installing Ubuntu

It is useful to have your computer ready to connect to the Internet so that you can download updates as soon as you have finished the installation. Although typically you would be recommended to not have your computer connected up, Ubuntu’s unique security configuration means that it effectively blocks all incoming network ports, so it is fairly secure until you start opening these ports.

Starting the Install To get started, insert the DVD into your drive and reboot your computer. The initial screen offers a variety of languages for you to use during installation (see Figure 1.1) followed by a list of options for you to choose from (see Figure 1.2).

FIGURE 1.1 Choose a language for the installation in this opening screen. However, four other options are on this screen that you need to be aware of. The second option is to Install Ubuntu, and this has the effect of running the installation program without booting into a live environment. If you select this option, you can pick up the walkthrough from Figure 1.4 later on in this section. The next option, checking the CD for defects, can be a very useful step, especially if you’ve been having problems with installing Ubuntu. Should it detect any errors, you should consider downloading a fresh image from the Internet and burning a new CD. Next up is a memory checker, which can also aid troubleshooting; with the relative cheapness of RAM, it’s a relatively small matter to replace any faulty memory that the checker finds. Finally, you can elect to boot from the hard drive, something you might want to do if you’ve accidentally left the CD in after doing some work with it. For any of the preceding options, use your cursor keys to move between them and press the Enter key to select one. Now back to the live CD installation!


15

1

FIGURE 1.2 Ubuntu gives you five options to choose from when you’re ready to proceed. Ubuntu starts the process by loading components from the DVD into memory, and after about 30 seconds or so, you are presented with the GNOME desktop that you can use to start testing things out. Bear in mind that Ubuntu loads some parts of itself from memory and other parts from the DVD, so it will not be a true representation of the real performance of Ubuntu. Rather, it’s designed to give you a taste of what to expect and allows you to test it with your hardware. Thanks to the work that has gone into Ubuntu 9.10, the majority of your hardware should be fine, and you can proceed to install Ubuntu. You do this by double-clicking the Install icon helpfully located on your desktop (see Figure 1.3).

NOTE If you find that some things don’t work, don’t panic. In these cases, Google is definitely your friend and you should do some research to see whether anyone else has had similar problems, or whether they’ve managed to install on similar hardware. Another great place to get help is the Ubuntu Forums at http://ubuntuforums.org, where you can interact with thousands of other Ubuntu fans.

After a couple of seconds, the Installation Welcome screen appears and prompts you to select a language (see Figure 1.4). As you can see, Ubuntu supports a wide range of languages, even native Welsh! Click forward when you have selected your language. The next screen asks you to specify your location in the world. This is used for setting time and region options, so find the city closest to you on the map and select it. Figure 1.5 shows that we have selected London, but it could be another city that is closer to you. Ubuntu automatically chooses the time zone and detects the offset from Greenwich mean time (GMT) for you.

16

CHAPTER 1

Installing Ubuntu

FIGURE 1.3 The standard Ubuntu desktop, complete with the helpful Install icon ready for you to make the switch to Ubuntu.

FIGURE 1.4 Select a language to use when installing Ubuntu. Click Forward to continue to the next screen. Following on from the Time and Region screen is the keyboard layout. Ubuntu will give a good guess at what type of keyboard is connected to your computer, but it allows you to change it in case it should differ. Make sure to find the correct layout for your keyboard (see Figure 1.6). If in doubt, use the text box at the bottom of the screen to try out all the keys. When you are happy that the keyboard layout is correct, click Forward to move on to the partitioning.


17

1 FIGURE 1.5 Choose the closest city to you in the world to allow Ubuntu to configure time and region settings correctly.

FIGURE 1.6 Choose the most appropriate keyboard layout for your computer, and then rigorously test it! Partitioning under Linux used to be somewhat of a black art, but Ubuntu has made it easy. You have three main options (two of which are shown in Figure 1.7): resize the disk and use the freed-up space, erase and use the entire disc, or manually edit the partition table. Unless you have a requirement to do so, avoid the third option; it can seriously cause

18

CHAPTER 1

Installing Ubuntu

trouble with other operating systems. For now, we assume that you want to resize your partition.

FIGURE 1.7 Tread carefully. One false move could obliterate your disk partitions. Wait, you wanted to do that? Use the slider to choose how big you want your new partition to be. We recommend no less than 20GB, to give yourself plenty of breathing room on your hard drive. Click Forward to start the resizing process. This can take some time, so you may want to go off and read some more of this book to learn about what else you can do with Ubuntu. Alternatively, you might decide that you want to erase all the data on your disk and start from scratch. In our opinion, this is the easiest and fastest option. If you’re happy to resize your hard drive, click Continue to allow Ubuntu to start the resize operation. It may take some time for Ubuntu to carry out the resize operation, so make yourself comfortable! After your partition settings have been completed, you’ll be presented with a dialog box asking you for your identity, so that Ubuntu can create its first user. Here you need to input your full name, your required username and password, and the name of the computer that you are installing onto. After you’ve entered all the information, click Next to proceed to the migration screen where you can select to bring across information from a Windows partition or other Linux distribution. This screen (shown in Figure 1.9) is only available if you have elected to re-size your partitions.

CAUTION When you set your password, be sure to remember what you entered! If you forget it, you will not be able to do much with your new system because you will not be able to log on to it.


19

FIGURE 1.8 Fill out all the fields on this screen to give you and your computer an identity.

FIGURE 1.9 Want to move your documents and settings into Ubuntu? Just select the relevant boxes and it’ll all come across. The final screen summarizes what you’ve chosen to do, and you should go over the settings list to make sure there are no surprises. Click the Install button to begin the

1

When setting a password, make sure that it has a mixture of letters and numbers to make it more secure. For instance, a good example of a password is T1a5c0p. Although this may seem like garbage at first glance, the easy way to remember it is by remembering the phrase This Is A Good Choice Of Password, shortened to Tiagcop, and finally substituting some of the letters with similar-looking numbers. Experiment with some phrases to see what you can come up with.

CHAPTER 1

20

Installing Ubuntu

installation, and you can leave your computer alone for about ten minutes and make yourself a coffee.

FIGURE 1.10 Sit back as Ubuntu takes over and installs itself to your hard drive.

At this point, get ready to connect your machine to the Internet. Log in to Ubuntu at the GDM welcome page (see Figure 1.12) and you will arrive at the default Ubuntu desktop (see Figure 1.13).

FIGURE 1.11 All done. Now all you have to do is reboot and watch as your system appears.

TIP Ubuntu works well with other operating systems, and you should see your other operating system listed on the GRUB screen. If you do not, head on over to http://www.tldp. org to get a host of tips for configuring GRUB.

First Update The first thing that you need to do with your new system is update it to the latest package versions. You do this mainly to ensure that you have the latest security updates available. You can do this in a couple of ways in Ubuntu, but the easiest way to do it is to click the Updates icon in the panel to open the Update Manager. Your screen will darken, and you will be asked for a password. This password is the same as the one you used to log in to your system and is used in this case to authorize Ubuntu to make a systemwide change


21

1

FIGURE 1.12 Enter your username and password to log on to your new system.

FIGURE 1.13 All ready for you to jump right in, the Ubuntu desktop welcomes you!

(install software, on this occasion). Another way to access the Update Manager is by going to System, Administration and choosing it from the menu. Figure 1.14 shows the Update Manager in action.

22

CHAPTER 1

Installing Ubuntu

FIGURE 1.14 Get the latest security and bug-fix updates for your installed software by using Update Manager. The application is easy to use because it automatically retrieves information on all the possible updates available to you. Just click Install Updates to start downloading and installing the necessary package updates. If you want more information, just click the Show Details arrow, or if you want Ubuntu to check again, click the Check button to force Ubuntu to refresh the updates.

Wubi—The Easy Installer for Windows One of the new additions to the Ubuntu CD is Wubi, which allows you to install an Ubuntu system within Windows. In effect, Wubi creates a large file to hold all the Ubuntu information and provides a way, using the Windows bootloader, to boot into Ubuntu without having to do any partitioning at all. What’s more, it’s almost as fast as the real thing and much faster than a Live CD. To get started with Wubi you need to simply insert the Ubuntu disc into your CD drive while Windows is booted. You’ll see a screen similar to Figure 1.15. Click the option to install inside Windows, to be taken to the next screen where you can choose some basic configuration options using the drop-down menus as shown in Figure 1.16. Wubi creates an image file on your hard drive and modifies the Windows bootloader to allow you to boot into Ubuntu or Windows. Don’t worry, though; your hard disk hasn’t


23

1

FIGURE 1.15 The auto-start menu gives you a gateway to Ubuntu. Click Install inside Windows to start the Wubi installation.

FIGURE 1.16 You can select some configuration options before you start the installation. actually been modified, but a rather large file has been created to hold Ubuntu. When you restart your system you’ll see the Ubuntu option, so press the down-arrow key and press Enter to begin booting into your new Ubuntu system. The first time you start up a Wubi Ubuntu installation, it does some post-installation configuration before loading the GNOME desktop. You now have a fully functional Ubuntu system. If you decide that you want to do a proper installation then you’ll need to remove Ubuntu and Wubi. Fortunately, as part of the Wubi installation, an entry is added to the Add/Remove Programs tool in Windows allowing you to quickly and easily remove Wubi and the associated Ubuntu installation. Just remember to back up any files that you want to keep!

24

CHAPTER 1

Installing Ubuntu

Shutting Down At some point, you are going to want to shut your computer down. As with most things in Linux, there are different ways to do it. You can use the Quit icon located in the upperright corner of your screen or use the same button located in the System menu. Either way, you can choose to shut down or restart your system. You can also choose to hibernate (saves a copy of the running state to disk and shutdowns) or suspend (saves the current running state to memory). We would recommend using either shutdown or reboot to ensure you get a clean system when it comes back up. If you are working at the command line, you can immediately shut down your system by using the shutdown command like this: $ sudo shutdown -h now

You can also use the shutdown command to restart your computer, as follows: $ sudo shutdown -r now

For new users, installing Ubuntu is just the beginning of a new and highly rewarding journey on the path to learning Linux. For Ubuntu system administrators, the task ahead is to fine-tune the installation and to customize the server or user environment.

Reference . http://www.ubuntu.com—The place to start when looking for news, information, and documentation about installing, configuring, and using Ubuntu. . http://tinyurl.com/c2x5u—Symantec’s PartitionMagic utility includes BootMagic, which can be used to support booting of Linux or, regrettably, other less-capable operating systems, such as Windows XP. . http://www.v-com.com/product/System_Commander_Home.html—V Communications, Inc.’s System Commander, a commercial 4.2MB download that can be used to support booting of any operating system capable of running on today’s PCs. An intelligent partitioning utility, Partition Commander, is included. . http://www.nwc.com/columnists/1101colron.html—How to use Intel’s Pre-execution Environment (PXE) protocol to remote boot workstations. . http://www.gnu.org/software/grub/—Home page for the GRUB boot loader. . http://www.ibiblio.org/pub/Linux/docs/HOWTO/other-formats/html_single/ BootPrompt-HOWTO.html—The BootPrompt-HOWTO, a guide to using the boot prompt for passing kernel arguments. . http://www.tldp.org/HOWTO/Installation-HOWTO/index.html—The Linux Installation-HOWTO, a guide to installing Linux, by Eric S. Raymond.

CHAPTER

2


IN THIS CHAPTER . Troubleshooting Post-Installation Configuration Problems . The sudo Command . First Update . Configuring Software Repositories

Now that the primary task has been completed (installing Ubuntu) you can begin to customize your new operating system. By default, Ubuntu presents you with a pretty blank canvas with which to personalize your experience. Some people choose to stick with the default look and feel, while others go for a full make over. In this chapter, we’ll take a look at getting up and running with Ubuntu, including a quick tour around the desktop. We will also take a look at some of the ways in which you can customize your Ubuntu installation, such as ensuring that date and time settings are correct, as well as show you how to do some basic administration tasks, such as identifying any problems with hardware. By the end of this chapter, you should feel comfortable enough to move on through the rest of the book.

. Installing Graphics Drivers . Changing Ubuntu’s Look and Feel . Preferred Behaviors . Input Devices . Detecting and Configuring a Modem . Configuring Power Management in Ubuntu . Setting the Date and Time . Configuring and Using CD, DVD, and CD-RW Drives . Configuring Wireless Networks . Reference

NOTE Throughout this chapter, we introduce you to several key applications relevant also to other chapters of this book. We include them here because they are essential to getting your system to work as you intend. You will find it worthwhile referring back to this chapter as you work your way through the book.

26

CHAPTER 2


Troubleshooting Post-Installation Configuration Problems A lot of work has gone into Ubuntu to make it as versatile as possible, but sometimes you may come across a piece of hardware that Ubuntu is not sure about. Knowing what to do in these situations is important, especially when you are working with Ubuntu for the first time. Because Ubuntu (and Linux in general) is built on a resilient UNIX foundation, it is much more stable than other operating systems. You might find this surprising if you are used to the Blue Screens of Death found on a certain operating system from Redmond, Washington. However, even though things might seem to be working fine, Ubuntu could have a problem that might not affect the appearance of the system. Perhaps kernel modules for devices will not load, for example, or services cannot start for some reason. In this section, you learn how to examine some of Ubuntu’s built-in error logs to help you diagnose any unseen faults. Ubuntu has a command that enables you to see detailed messages that are output directly by the operating system: the dmesg command, which is commonly used with the grep command to filter output. The dmesg command takes its output directly from the /var/log/messages file, so you can choose to either run dmesg directly or enter less /var/log/messages instead. The output is fairly detailed, so be prepared for an initial shock when you see how much information is generated. You might find it easier to generate a file with the dmesg output by using the following command: $ dmesg > dmesg.txt

This takes the output from the dmesg command and stores it in a new text file called dmesg.txt. You can then browse it at your leisure using your choice of text editor such as vi or emacs. You can even use the less command, like so: $ less dmesg.txt

The messages are generated by the kernel, other software run by /etc/init.d, and Ubuntu’s runlevel scripts. You might find what appear to be errors at first glance, but some errors are not really problems (for example, if a piece of hardware is configured but not present on your system). Thanks to Google, troubleshooting is no longer the slow process it used to be. You can simply copy and paste error messages into Google and click Find to bring up a whole selection of results similar to the problem you face. Remember, Google is your friend, especially http://www.google.com/linux, which provides a specialized search engine for Linux. You can also try http://marc.info, which browses newsgroup and mailing list archives. Either way, you are likely to come across people who have had the same problem as you. It is important to only work on a solution to one problem at a time; otherwise, you may end up getting no work done whatsoever. You should also get into the habit of making

The sudo command

27

backup copies of all files that you modify, just in case you make a bad situation worse. Use the copy command like this: $ cp file file.backup

If something breaks as a result of you changing the original file, you can always copy the original back into place using the command like this: $ cp file.backup file

(Something as simple as this can really save your bacon, especially when you are under pressure when you’ve changed something you shouldn’t have on a production system. That is, if you are daft enough to make sweeping changes on a production system!)

The sudo command If you have come across Linux, you are probably aware of the command line. As you will find as you work through this book, Ubuntu puts a lot of reliance upon the sudo command while working at the command line. This command is used in front of other commands to tell Ubuntu that you want to run the specified command with super user powers. This sounds really special, and it actually is. When you work using the sudo command, you can make wide-ranging changes to your system that impact the way it runs. Be extra careful when running any command prefixed with sudo, however; a wrong option or incorrect command can have devastating consequences. The use of sudo is straightforward. All you have to do is enter it like this: $ sudo command commandoptions

Just replace the word command with the command that you want to run, along with any options. For example, the following command opens your xorg.conf file in vi and enables you to make any changes as the super user before being able to save it: $ sudo vi /etc/X11/xorg.conf

Whenever you execute a command using sudo, you are prompted for your password. This is the same password that you use to log in to Ubuntu, so it is important that you remember it. Sometimes, however, you may want to work with a classic root prompt instead of having to type sudo in front of every command (perhaps if you have to work with lots of commands at the command line that require super-user access, for example). sudo enables

2

You should never use a .bak extension because this could get overwritten by another automatic process and will leave you frustrated when you try to restore the original file.

28

CHAPTER 2


you to do this by using the sudo -i command. Again, you are prompted for your password, which you should enter, after which Ubuntu gives you the standard root prompt, as follows: #

From here, you can execute any command without having to keep entering sudo.

First Update As discussed in Chapter 1, “Installing Ubuntu,” you should update your software as soon as you log in to Ubuntu for the first time to benefit from any available security and bug fixes. In that example, we used the Update Manager, which is really a GUI wrapper for the command apt-get. In the background, Ubuntu automatically polls the software repositories configured as standard to determine whether any updates are available. When it detects that new versions of installed software are available, a pop-up message appears in the upper-right corner of your screen. By clicking the Updates icon in the panel, you automatically open Update Manager, but not before you are prompted for your password (because you are about to make a systemwide change). Another way of updating your system, and one that can be quicker than Update Manager, is to use the command line. If you go to the Applications, Accessories menu and select the Terminal option, a blank screen displays. This is the command line (commonly referred to as the terminal) and is one of the most powerful features of Linux. It is covered in more detail in Chapter 30, “Command Line Masterclass,” so we won’t delve too deeply here. You are greeted with a prompt similar to the one here: andrew~$

A blinking cursor also displays. Ubuntu is awaiting your first command. Here we want to issue the following command: $ sudo apt-get update

First Update

29

This command tells the package management utility apt-get to check in with the configured repositories and check for any updates for installed software. In a matter of seconds, Ubuntu completes all of this and your screen should look something like this: $ sudo apt-get update Password:

Get: Get: Get: Get: Get:

10 11 12 13 14

http://gb.archive.ubuntu.com hardy/multiverse Packages [95.2kB] http://security.ubuntu.com hardy-security/restricted Packages [4253B] http://security.ubuntu.com hardy-security/universe Packages [5271B] http://security.ubuntu.com hardy-security/multiverse Packages [1677B] http://security.ubuntu.com hardy-security/main Sources [6227B]

Get: 15 http://security.ubuntu.com hardy-security/restricted Sources [974B] Get: 16 http://security.ubuntu.com hardy-security/universe Sources [639B] Get: 17 http://security.ubuntu.com hardy-security/multiverse Sources [533B] Hit http://gb.archive.ubuntu.com hardy/main Sources Get: 18 http://gb.archive.ubuntu.com hardy/restricted Sources [1478B] Hit http://gb.archive.ubuntu.com hardy/universe Sources Hit http://gb.archive.ubuntu.com hardy/multiverse Sources Get: 19 http://gb.archive.ubuntu.com hardy-updates/main Packages [37.7kB] Get: 20 http://gb.archive.ubuntu.com hardy-updates/restricted Packages [14B] Get: 21 http://gb.archive.ubuntu.com hardy-updates/universe Packages [8363B] Get: 22 http://gb.archive.ubuntu.com hardy-updates/multiverse Packages [866B] Get: 23 http://gb.archive.ubuntu.com hardy-updates/main Sources [22.1kB] Get: 24 http://gb.archive.ubuntu.com hardy-updates/restricted Sources [14B] Get: 25 http://gb.archive.ubuntu.com hardy-updates/universe Sources [1823B] Get: Get: Get: Get:

26 27 28 29

http://gb.archive.ubuntu.com http://gb.archive.ubuntu.com http://gb.archive.ubuntu.com http://gb.archive.ubuntu.com

hardy-updates/multiverse Sources [427B] hardy-backports/main Packages [14B] hardy-backports/restricted Packages [14B] hardy-backports/universe Packages [14B]

Get: 30 http://gb.archive.ubuntu.com hardy-backports/multiverse Packages [14B] Get: 31 http://gb.archive.ubuntu.com hardy-backports/main Sources [14B]

2

Get: 1 http://security.ubuntu.com hardy-security Release.gpg [189B] Get: 2 http://security.ubuntu.com hardy-security Release [30.9kB] Get: 3 http://gb.archive.ubuntu.com hardy Release.gpg [189B] Get: 4 http://gb.archive.ubuntu.com hardy-updates Release.gpg [189B] Get: 5 http://gb.archive.ubuntu.com hardy-backports Release.gpg [189B] Hit http://gb.archive.ubuntu.com hardy Release Get: 6 http://gb.archive.ubuntu.com hardy-updates Release [30.9kB] Get: 7 http://security.ubuntu.com hardy-security/main Packages [25.1kB] Get: 8 http://gb.archive.ubuntu.com hardy-backports Release [19.6kB] Hit http://gb.archive.ubuntu.com hardy/main Packages Get: 9 http://gb.archive.ubuntu.com hardy/restricted Packages [4571B] Hit http://gb.archive.ubuntu.com hardy/universe Packages

30

CHAPTER 2


Get: 32 http://gb.archive.ubuntu.com hardy-backports/restricted Sources [14B] Get: 33 http://gb.archive.ubuntu.com hardy-backports/universe Sources [14B] Get: 34 http://gb.archive.ubuntu.com hardy-backports/multiverse Sources [14B] Fetched 299kB in 2s (140kB/s) Reading package lists... Done

Now you need to issue the command to upgrade your software by entering the following: $ apt-get dist-upgrade

Because you have already checked for updates, Ubuntu automatically knows to download and install only the packages it needs. The dist-upgrade option intelligently works with newer packages to ensure that any dependencies that are needed can be satisfied. You can also use the option upgrade instead, but it isn’t as smart as dist-upgrade.

apt-get Alternatives Ubuntu has an alternative to apt-get called aptitude. It works in pretty much the same way as apt-get with the exception that aptitude also includes any recommended packages on top of the requested packages when installing or upgrading. You can use aptitude exactly as you would use apt-get, so for instance you could issue the command aptitude update and it would update the repository information. However, you can also issue just the command aptitude without any options, which brings up a text-based package manager that you can use to select packages.

Configuring Software Repositories Ubuntu uses software repositories to get information about available software that can be installed onto your system. By default, it only allows access to a small portion of software (even though this software is officially supported by Ubuntu). However, Ubuntu is based on a much older Linux distribution called Debian. Debian has access to more than 17,000 different packages, which means that Ubuntu can have access to these packages, too. To gain access to these additional packages, you need to make some changes to your repository configuration files by using the Software Sources GUI tool, found under the System, Administration menu and as shown in Figure 2.1. On the first tab (Ubuntu Software), you have five options to choose from, depending on your requirements. It is entirely up to you which options you check, but make sure that as a minimum the first check box is checked to allow you to select “official” software with Canonical support for Ubuntu. The more boxes you check, the wider your selection of software. It’s also a good idea to make sure that the Proprietary Drivers box is checked in order to benefit from drivers that could enhance your system’s performance.

Configuring Software Repositories

31

2

FIGURE 2.1 Enable both Universe and Multiverse repositories to allow access to a huge variety of software for Ubuntu.

Open Source Versus Proprietary You will hear a lot of arguments about using Proprietary drivers within Ubuntu. Some people feel that it goes against what Open Source stands for, in that the underlying code that is used for the drivers cannot be viewed and modified by the wider community (as opposed to the actual driver developers). However, there is also a strong argument that says users should have to undergo the least amount of work for a fully functional system. This is certainly the case for graphics cards, although at the time of writing AMD has announced the open sourcing of the ATI graphics driver. Ubuntu takes a middle of the road stance on this and leaves it up to the user to either enable or disable the repository that gives access to proprietary drivers. Why not give the open source drivers a chance before plumping for a proprietary one?

Once you are happy with your selections, switch to the Updates tab to configure Ubuntu’s behavior when updates are available (see Figure 2.2). By default both the important security updates and recommended updates are checked to ensure that you have the latest bug fixes and patches. You can also choose to receive proposed updates and back-ports (software that is released for a newer version of Ubuntu but re-programmed to be compatible with 8.04), but we’d only recommend this if you are happy to carry out testing for the community as any updated software from these repositories can have an adverse effect on your system.

32

CHAPTER 2


FIGURE 2.2 Configure which updates you want, and you want them to be handled in the Updates tab of Software Sources.

Ubuntu also allows you to configure how often it checks for updates, as well as how they are installed. By default Ubuntu checks daily for updates and, if there are any available, will notify you. However, you can change the frequency (something which is recommended if you want to have a structured update policy) and the actions Ubuntu carries out when it finds available updates. We recommend keeping the notification only option as this allows you to see what updates are available prior to them being installed. If you want to save time then choose Download All Updates in the Background to allow Ubuntu to silently download the updates prior to you choosing to install them.

CAUTION We don’t recommend selecting the option which automatically installs security updates. It’s important that you have the option of choosing to install updates as there is always the chance that an update may cause problems. The last thing you want is for your system to suddenly stop working because an update was installed that has broken something without your knowledge.

Part of the magic of Ubuntu is the ease in which you can upgrade from major version to major version, such as moving from 9.04 to 9.10 for instance. Some Ubuntu releases are called LTS for Long Term Support and are intended for those who do not wish to upgrade their operating system as often. It is possible to do this. By ensuring that the release

Installing Graphics Drivers

33

upgrade option is set to Long Term Supported releases only, you’ll only be prompted to upgrade your version of Ubuntu to what will be the next Long Term Supported version, which, based on history, would be 10.04! After configuring your update options, click the Close button. Ubuntu prompts you with a message that the software information is out of date and needs to be refreshed; click Reload to retrieve the very latest update information. After a few seconds you are returned to your desktop and can carry on working.

2

Installing Graphics Drivers Ubuntu is extremely good at detecting and configuring graphics cards. By default it ships with a number of proprietary drivers to allow graphics cards to work and will alert you to this by using the Hardware Drivers Manager. You can then choose to enable or disable the drivers as appropriate, depending on your personal preference. (See the “Open-Source Versus Proprietary” note earlier in this chapter.) You can find the Hardware Drivers Manager under the System, Administration menu, and it is shown in Figure 2.3.

FIGURE 2.3 Toggle the usage of restricted drivers with a simple point-and-click interface. Here you can see that an Intel network driver has been enabled for use.

If you elect to use a listed proprietary driver, Ubuntu will first confirm that you are happy to proceed and then automatically download and install the driver. This may require you to log out and back in again in order for the driver to take effect.

34

CHAPTER 2


For the most part, Ubuntu will detect and configure the majority of graphics cards from the start, and even if it has problems, it will attempt to give you a display of some sort. This feature is known as BulletProof X, and it allows you access to tools that may help you fix your problem by trying different combinations of graphics cards and monitors.

Changing Ubuntu’s Look and Feel GNOME, the default window manager for Ubuntu, has a number of options to change how it looks and feels. The default theme is Human; this takes a blend of the GNOME Clearlooks theme, mixes it with icons from the Tango Project, and adds a little spice direct from Ubuntu. However, it is not to everyone’s taste, so in this section we look at changing the visual style of Ubuntu.

Changing the Desktop Background Perhaps the easiest and most dramatic change you can make is to change the default desktop background. It is as simple as right-clicking on the desktop and selecting the option to Change Desktop Background to see the dialog box shown in Figure 2.4. Ubuntu comes with a small selection of wallpapers to start with, but we recommend going to the Web to find a great selection. Our favorite site is http://www.gnome-look.org, where you can find a great selection of desktop wallpapers.

FIGURE 2.4 Choose one of the default wallpapers, or use the Add Wallpaper option to select your own image file.

Changing Ubuntu’s Look and Feel

35

As you click on a wallpaper, Ubuntu automatically applies it so that you can quickly see whether you like it. When you are happy with your selection, keep the dialog box open so we can change other aspects of the desktop.

Changing Colors

Thankfully, GNOME offers an array of tools to modify the defaults. Just head to the System, Preferences, Appearance option to quickly change the entire theme (see Figure 2.5). Or if you’ve kept the dialog box open as suggested earlier, click the Theme tab. You will see a list of predefined themes that you can choose from.

FIGURE 2.5 Either use the default themes or mix and match elements of them to match your specifications.

Alternatively, you can click the Customize button to mix up your own look and feel, as shown in Figure 2.6. You can choose to change the window decorations (title bar, minimize, maximize buttons, and so on), the general color scheme and the icon theme. As you

2

Next up is the colors that Ubuntu defaults to. When Ubuntu was originally launched in October 2004, it came with a predominantly brown theme, leading to some users questioning the style choices of the Ubuntu development team. Over time the brown has been replaced with a warm caramel color (which, to be honest, is only slightly better than the brown).

36

CHAPTER 2


select an option, Ubuntu automatically applies it to the desktop so you can get an idea of how it will look. When you’re happy with your selections click Close to return to the main Theme dialog box and move on to the next section.

FIGURE 2.6 Use any number of combinations of icons, colors, and window decorations to give you a truly personalized look and feel.

Modifying System Fonts GNOME also enables you to change the fonts used throughout Ubuntu. If you have difficulty reading one font, just exchange it for another. In the Appearance dialog box you will see a tab called Fonts. Click on this tab to see the options available for changing system fonts, which are shown in Figure 2.7. Simply click on each font name to customize the font used for that function. For instance, you may prefer your Window Title Font to be italicized, so click the font name and select the Italic option. Clicking OK immediately applies the change, again giving you a good idea of whether it works. Sometimes a font can look good within the Font Preferences screen, but when it comes to using it you wonder why on earth you chose it. Choose your fonts wisely!

Changing How Menus Look You can also change the look of menus, including the location of text descriptions for each icon, by selecting the Interface tab. To be honest, there’s not much to look at here, and you would only change any of these options if you had a burning desire to replace your icons with text.

Preferred Behaviors

37

2

FIGURE 2.7 Keep your fonts relatively simple for ease of use, or if you prefer, indulge your love of calligraphic fonts!

Visual Effects Perhaps the most exciting part of Ubuntu 9.10 is that by default it comes with some pretty snazzy visual effects to enhance the look and feel of your desktop. Click the Visual Effects tab to see the options available for configuring the level of effects, shown in Figure 2.9. In keeping with Ubuntu’s philosophy of keeping things simple, there are three options to choose, from which you can elect to turn off all visual effects, use a basic set of effects, or use a lot of visual effects. If you choose this last option you will need to have a relatively fast computer (that is, purchased after 2004) with plenty of memory (at least 1GB) to ensure that the computer doesn’t grind to a halt while rendering effects.

Preferred Behaviors Ubuntu can detect and adapt to certain events that happen when you plug something into your computer or if you click on a link. Sometimes you may want Ubuntu to open one application rather than another, or sometimes to not do anything at all. This is called Ubuntu’s behavior, and you can modify it to work as you want it to. You can find the two main tools you need to do this under the System, Preferences menu, and you need use either Preferred Applications or Removable Drives and Media.

Preferred Applications Preferred applications are the applications that Ubuntu calls upon when it wants to open an Internet site, an email, or a terminal (see Figure 2.9). Ubuntu makes it easy for you by automatically detecting the available options for you. Alternatively, if you want to specify

38

CHAPTER 2


FIGURE 2.8 Wow your friends and colleagues by activating visual effects to enhance your user experience. Alternatively, switch them all off if you get a bit overwhelmed by windows flying everywhere! your own particular application that may not appear in the list by default, select the Custom option within the application type and enter the command used to launch the application into the field along with any options, arguments, or switches that you want to use.

FIGURE 2.9 Setting preferred Internet applications.

Input Devices

39

Removable Drives and Media

This handy tool goes by the catchy name of Removable Drives and Media, or to call it by its proper (package) name, gnome-volume-properties. With this tool, you can select the default command to run when Ubuntu detects the presence of a new drive or piece of hardware. Unlike the Preferred Applications tool, this tool does not detect the options for you, instead relying on you knowing the command needed to execute the correct application. For example, in Figure 2.10, you can see the options for handling digital images in Ubuntu. When I connect my digital camera after a hard day’s snapping, GNOME will detect its presence and launch F-Spot, ready for it to import my pictures directly into its library.

FIGURE 2.10 Take the hard work out of importing digital images by configuring gnome-volumeproperties to work the way you want. Other options include GNOME’s behavior when removable drives (USB pen drives and the like) are connected, what to do in the event of a PDA or scanner being connected, and even more obscurely, what to do when a USB mouse is plugged in.

Input Devices The primary interface between you and your computer is your keyboard and mouse. Both of these are essential to the correct usage of your computer, so it is important that they are configured correctly. Windows users will be familiar with the basic options available, so it

2

In an increasingly connected world, you will find yourself plugging all sorts of devices and widgets into your computer. For the most part, it is usually multimedia files that you want to launch in a specific way. Ubuntu provides a great tool to configure the consequences of everything from plugging a digital camera into your computer, inserting a film DVD, and even plugging in a graphics tablet.

40

CHAPTER 2


could come as somewhat of a shock to learn that you can do a few more nifty things with a keyboard and mouse in Ubuntu.

Keyboard Shortcuts If you have used a computer for more than a few years, you probably long for keyboard shortcuts for popular commands. Ubuntu allows you to set your own keyboard shortcuts for a wide variety of system commands. The easy-to-use Keyboard Shortcuts option under System, Preferences lists a lot of different actions that you can program shortcuts for (see Figure 2.11).

FIGURE 2.11 Make your life easier and your work go more quickly by configuring useful keyboard shortcuts. If you have one of those multimedia keyboards with lots of extra keys, this is the place to configure their use. Just click on the shortcut next to the action you want to configure and press the key that you want to map to this action. Repeat this until you have exhausted all the combinations that you want to configure. Then click Close to finish.

Keyboard Layout Getting the layout of your keyboard right can make a huge difference in how you work. When you installed Ubuntu (see Chapter 1), you would have specified the default keyboard layout to use. However, there may be times when you need to switch layouts, which you can do using the Keyboard tool in the System, Preferences menu (see Figure 2.12). Certainly, I’ve had to configure this for my wife. You see, in the United Kingdom our @ key is located to the right of the colon/semicolon key, whereas in the United States it is located on the number 2 key. My wife spent quite a few years in the States and got used to the U.S. keyboard layout. So instead of her having to learn a new layout, I just configured

Input Devices

41

2 FIGURE 2.12 Use the Keyboard Layout tool to ensure that you have your keyboard settings configured correctly. her login to use the U.S. layout and mine to use the U.K. layout, which has saved us from a number of arguments! However, you can also use the Keyboard Layout tool to configure special key behaviors. For instance, some people prefer to swap the Caps-Lock and left Ctrl key around. You can set this option and others in the Layout Options tab. If you are not yet an l33t hacker, experiment with what’s on offer; you may get some benefit from these customizations. Finally, Ubuntu can also configure and enforce typing breaks, all in the name of good health. Simply set the length of working time, the duration of the break, and whether you want to be able to postpone. When this is activated at the end of the first length of working time, Ubuntu locks the computer and will not let you log back in until the break duration has passed. Of course, if you are in the middle of something important, setting the Postpone option may prove useful.

Mouse There’s not really much to configuring a mouse. Ubuntu does a great job of detecting most mice, except that it’s not so good at configuring extra buttons over and above the left and right button and scroll wheel. The most useful option here is the Locate Pointer option, which highlights the mouse pointer when you press the Ctrl key. Of course, if you are left-handed, you can also swap the mouse buttons over, but this is a matter of personal preference.

42

CHAPTER 2


Detecting and Configuring a Modem More than 38 million users in the United States and another 85 million users around the world now connect to the Internet with cable or digital subscriber line (DSL) service, but for many users a modem is the standard way to connect with an Internet service provider (ISP) using the Point-to-Point Protocol (PPP). Other common tasks for modems include sending and receiving faxes. If you add or change your modem after the initial installation, you must configure Ubuntu to use the new modem to perform all these tasks. Ubuntu includes several tools you can use to configure and use an internal or external modem in your notebook or PC. Chapter 14, “Networking,” contains the details about configuring Ubuntu to connect to the Internet using a modem. This section covers how to configure and use modems using serial ports (using a standard formerly known as RS232, but now called EIA232) or USB.

Configuring a Serial-Port Modem Linux uses /dev/ttySX, /dev/ttyUSBX, or /dev/usb/ttyUSBX for serial ports, where X can range from 0 to 15. You can add many additional ports to a system using multiport cards or chained USB devices. A PC’s integral serial ports are generally recognized at boot time. To see a list of recognized ports for your system, pipe the dmesg command output through the fgrep command, as follows: $ sudo dmesg | grep tty ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A

In this example, the grep command reports that two serial ports have been recognized in the dmesg output. Note that the device matching ttyS00 is /dev/ttyS0, despite the kernel output. The PC’s external modem can be attached (most likely using a male DB9 adapter) to either port. Under Linux, nearly all modem-dependent software clients look for a symbolic link named /dev/modem that points to the desired device. This link is not created by default; as root, however, you can create this device manually using the ln command like this: $ sudo ln -s /dev/ttyS0 /dev/modem

In this example, /dev/modem will point to the first serial port. Ubuntu’s network-admin (shown in Figure 2.13 and found under System, Administration, Networking) will always detect the presence of a modem on the system. However, it does not activate the interface unless specifically told to do so. You can use the Auto-Detect button to find the correct modem port.

Configuring WinModems for Laptops Other issues regarding modems focus on Linux notebook users with laptops using controllerless modems. These modems use proprietary software to emulate a hardware modem and are commonly referred to as WinModems due to the software being available

Configuring Power Management in Ubuntu

43

2

FIGURE 2.13 Ubuntu’s network-admin will help you set up an appropriate modem. only on Windows. Despite the release of binary-only drivers to enable use of some of these modems, these devices remain the bane of Linux notebook and some desktop users. You might find some support for Lucent (but not Lucent AMR), Motorola SM56-type, the IBM Mwave, and Conexant HSF (not HCF) controllers. At the time of this writing, there was no support for any 3Com or U.S. Robotics controllerless modems. For links to drivers and more information, browse to the Linux WinModem web page at http://www. linmodems.org.

Configuring Power Management in Ubuntu Advanced Configuration and Power Interface (ACPI) enables workstations and servers to automatically turn off when instructed to shut down. Most often used by Linux mobile users, ACPI can help extend battery sessions through the use of intelligent storage-cell circuitry, CPU throttling (similar to, but not the same as safety thermal throttling incorporated by Intel in Pentium III and IV CPUs), and control of displays and hard drives. Most PCs support ACPI via the BIOS and hardware. ACPI support is configured, enabled, and incorporated in the Linux kernel. ACPI information is constantly available through the acpi command, which looks like this: $ acpi -V Battery 1: charged, 100% Thermal 1: ok, 47.0 degrees C AC Adapter 1: on-line

This example provides information such as battery charge status, percentage of charge, as well as current system temperature and status of the AC adapter.

44

CHAPTER 2


Alternatively, you can use the GUI tool that Ubuntu provides, which can be found under the System, Preferences menu as the Power Management option (shown in Figure 2.14).

FIGURE 2.14 Gnome Power Management allows you to monitor battery status and configure specific power-related actions, such as closing the lid of your laptop or pressing the power button.

Fortunately, Ubuntu provides good support for suspend and hibernate. Suspend means that your computer writes its current state to memory and goes into a low power mode, while Hibernate writes the current state of the system to disk and powers off the computer. Either way, your computer will start much faster the next time you go to use it.

Setting the Date and Time The Ubuntu installer queries during installation for default time zone settings, and whether your computer’s hardware clock is set to Greenwich mean time (GMT)—more properly known as UTC or coordinated universal time. Linux provides a system date and time; your computer hardware provides a hardware clock-based time. In many cases, it is possible for the two times to drift apart. Linux system time is based on the number of seconds elapsed since January 1, 1970. Your computer’s hardware time depends on the type of clock chips installed on your PC’s motherboard, and many motherboard chipsets are notoriously subject to drift. Keeping accurate time is not only important on a single workstation, but also critically important in a network environment. Backups, scheduled downtimes, and other networkwide actions need to be accurately coordinated. Ubuntu provides several date and time utilities you can use at the command line or during an X session, including these: . date—Used to display, set, or adjust the system date and time from the command line

Setting the Date and Time

45

. hwclock—A root command to display, set, adjust, and synchronize hardware and system clocks . time-admin—Ubuntu’s graphical date, time, and network time configuration tool

Use the date command to display or set your Linux system time. This command requires you to use a specific sequence of numbers to represent the desired date and time. To see your Linux system’s idea of the current date and time, use the date command like this: $ date Tue Mar 18 20:01:43 GMT 2008

To adjust your system’s time (say, to March 1927, 2008 at 8 a.m.), use a command line with the month, day, hour, minute, and year, like so: $ sudo date 031908002008Wed Mar 19 08:00:00 GMT 2008

Using the hwclock Command Use the hwclock command to display or set your Linux system time, display or set your PC’s hardware clock, or to synchronize the system and hardware times. To see your hardware date and time, use hwclock with its --show option like so: $ hwclock --show Tue 18 Mar 2008 20:04:27 GMT

-0.034401 seconds

Use hwclock with its --set and --date options to manually set the hardware clock like so: $ sudo hwclock --set --date “03/19/08 08:00:00” $ hwclock --show Wed 19 Mar 2008 08:00:08 AM GMT -0.151718 seconds

In these examples, the hardware clock has been set using hwclock, which is then used again to verify the new hardware date and time. You can also hwclock to set the Linux system date and time date using your hardware clock’s values with the Linux system date and time. For example, to set the system time from your PC’s hardware clock, use the —hctosys option like so: $ sudo hwclock --hctosys

To set your hardware clock using the system time, use the —systohc option like so: $ sudo hwclock --systohc

2

Using the date Command

46

CHAPTER 2


Changing the Time and Date Ubuntu’s graphical X tool named time-admin can be used to set your system date and time. The client is found in System, Administration, Time & Date. To make any changes to this tool you need to unlock it by clicking the Unlock button. You’ll be asked to enter a password that corresponds with a user who has administrator privileges. Once you’ve done this, you are able to change any of the options. Set the date and time by using the Calendar and Time fields. You can also have your workstation obtain updated date and time information via the Internet by choosing Remote Time Servers under the Select Servers button. To do this, you need to have ntpd time daemon support installed. If it is not present, Ubuntu asks whether you want to retrieve it, and then installs it so that you can proceed. After it has been installed, restart the timeadmin client and you will now be able to select specific Internet time servers for you to synchronize with.

FIGURE 2.15 Use Ubuntu’s time-admin client to set your system date and time.

Configuring and Using CD, DVD, and CD-RW Drives Linux provides support for using a variety of CD and DVD devices and media. This section shows how to determine what device has been assigned to your CD drive and how to get additional drive information if the drive supports recording on optical media. AT Attachment Packet Interface, or ATAPI, IDE-based CD drives are recognized during installation and work through the ide-cd kernel module. A symbolic link named /dev/cdrom is created and the device is mounted under /media/cdrom, both of which point to your CD’s device (perhaps /dev/hdb or /dev/hdc). You can use many different types of CD drives with Linux, and you can easily replace, add, or upgrade your system to use a new drive. Part of a successful configuration involves the proper installation of the hardware and being able to determine the drive’s device when using Linux.

Configuring and Using CD, DVD, and CD-RW Drives

47

Checking Drive Assignment Linux recognizes CD and DVD drives upon booting if they are attached to your computer’s motherboard with proper cabling and if they are assigned as either a master or slave on an IDE channel. Look through your kernel boot message for the drive device assignment, such as the following:

If you have a DVD-capable drive, you generally should also have a symbolic link named /dev/dvd and an entry under /media that point to your drive’s device because many DVD clients, such as xine or vlc, look for /dev/dvd by default. The first CD-RW drive is assigned to the device /dev/scd0 (although it might still be initially recognized while booting as an IDE device), with subsequent drives assigned to /dev/scd1, and so on. To initialize your drive for use, the following modules should be loaded: Module sg sr_mod cdrom ide-scsi scsi_mod

Size Used by Not tainted 30244 0 (autoclean) 15192 0 (autoclean) 27872 0 (autoclean) [sr_mod] 8128 0 96572 2 [sr_mod ide-scsi]

Look for kernel message output regarding the device such as this: Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 0x/32x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12

Your ATAPI-based CD-RW drive will then work as a SCSI device under emulation, and the symbolic link /dev/cdrom should point to /dev/scd0. You can also use the cdrecord command (included with Ubuntu’s multimedia software packages) to acquire SCSI device information about your drive for later use during the burning operation, as follows: # cdrecord -scanbus

scsibus1: 1,0,0

0) ‘HL-DT-ST’ ‘RW/DVD GCC-4120B’ ‘2.01’ Removable CD-ROM

1,1,0 1,2,0 1,3,0

1) * 2) * 3) *

1,4,0 1,5,0

4) * 5) *

1,6,0 1,7,0

6) * 7) *

2

sr: DVDROM 10X, ATAPI CD/DVD-ROM drive

CHAPTER 2

48


The pertinent information—1,0,0 in the example (SCSI bus, device ID, and logical unit number, or LUN)—can then be used during a burn operation like this: # cdrecord –v speed=8 dev=1,0,0 –data –eject file_name.img

In this example, a CD-ROM data image named file_name.img is created on a CD-R or CD-RW media at a speed of 8, and the new disk will be ejected after the write operation has completed.

NOTE Ubuntu also includes the dvdrecord, dvd+rw-format, and growisofs commands, which can be used with DVD-R and DVD-RW drives.

Configuring Wireless Networks Wireless networking used to be a pig to configure for Linux, requiring a lot of complicated steps to connect to a wireless network. However, Ubuntu includes a great utility called Network Manager that makes connecting to and managing wireless networks extremely easy. Thanks to the inclusion of several wireless chipset drivers in the Ubuntu Linux kernel, it is now easy to connect to WEP and WPA encrypted wireless networks. When you log in to Ubuntu, you should see the Network Manager applet appear in the top panel (see Figure 2.16). This is the applet that handles and monitors network connections.

FIGURE 2.16 The Network Manager notification applet, seen here already connected to a wireless network. Click the applet icon in the toolbar to connect to a wireless network. If your wireless access point broadcasts its SSID, it should appear in the list under wireless networks (similar to Figure 2.16). Simply click on the required network and Network Manager will detect what encryption (if any) is in use and ask you for the passkey. Enter this and Network Manager will start the wireless connection. The passkey is then stored in the default keyring, a secure area that is unique to your login. From now on, whenever you log in to Ubuntu, the Network Manager connection will start automatically. If for some reason your wireless network does not appear (you might have your SSID hidden), you must use the Connect to Other Wireless Network option, which brings up the screen shown in Figure 2.17.

Reference

49

2

FIGURE 2.1 Configure your wireless network connection settings using Network Manager. Network Manager can handle WEP and WPA Personal encryption. You are advised to use WPA encryption because it is the stronger of the two. Network Manager can also connect to Cisco VPN connections, using the vpnc software. Install this using synaptic and you will be able to specify connection settings as appropriate, or if you have access to a predefined configuration (.pcf file) you can import it directly into Network Manager.

Related Ubuntu and Linux Commands You will use these commands when performing post-installation configuration tasks: . acpi—Views or uses power management settings and commands . cdrecord—Gets SCSI device information and burns CD-ROMs . dmesg—Views information reported by the Linux kernel

Reference . The Linux Keyboard and Console HOWTO—Andries Brouwer’s tome on keyboard and console issues; includes many troubleshooting tips. . http://www.x.org/—The X.Org Foundation, home of X11R7. . http://www.alsa-project.org—Home page for the Advanced Linux Sound Architecture project, an alternative set of sound drivers for Linux. . http://www.opensound.com—Commercial sound drivers for Linux. . /usr/src/linux-2.6/Documentation/power/pci.txt—Patrick Mochel’s document regarding PCI power-management routes for Linux kernel and PCI hardware support programmers.

50

CHAPTER 2


. http://tldp.org/HOWTO/Modem-HOWTO.html—One of the newest HOWTOs on using modems with Linux. . http://tldp.org/HOWTO/Serial-HOWTO.html—David S. Lawyer’s Serial HOWTO, with additional information about Linux and serial port use. . http://www.camiresearch.com/Data_Com_Basics/RS232_standard.html—A description and tutorial on the EIA232 (formerly RS232) standard. . http://www.qbik.ch/usb/devices/—The place to check for compatibility of USB devices for Linux. . http://www.linmodems.org—This site provides links to several drivers for controllerless modem use under Linux. . http://www.linux1394.org/—Home page for the Linux IEEE 1394 project with new information, links to updated drivers, and lists of compatible chipsets and devices. . http://groups.google.com/—Search Usenet groups through Google; another alternative to http://marc.theaimsgroup.com/. . http://www.linuxquestions.org/—The Linux Questions site, a useful set of community forums that can help you find answers to your more frustrating problems. . http://cdrecord.berlios.de—Home page for the cdrecord command and related utilities.

CHAPTER

3

Working with GNOME

IN THIS CHAPTER . The GNOME Desktop Environment . Eye Candy for the Masses . Basic X Concepts . Using X . Starting X

Imagine a world of black screens with white text, or for

. KDE—The Other Environment

those of you who remember, green screens with green text. That used to be the primary interface for users to access computers with. Thankfully computing has moved on significantly and has adopted the graphical user interface or GUI as standard on most desktop and workstation platforms.

. XFce

Ubuntu is no different and its primary window manager is called GNOME (the Gnu Network Object Model Environment). Based upon the ethos of simplicity by design, GNOME offers a rich and full interface that you can easily use to be productive. The principle design objectives include an intuitive system, meaning that it should be easy to pick up and use as well as good localization/internationalization support and accessibility. GNOME is founded upon the X Window System, the graphical networking interface found on many Linux distributions which provides the basis for a wide range of graphical tools and window managers. More commonly known as just X, it can also be referred to as X11R7 and X11 (such as that found on Mac OS X). Coming from the worldrenowned Massachusetts Institute of Technology, X has gone through several versions, each of which has extended and enhanced the technology. The open source implementation is managed by the X.Org foundation, the board of which is made up of several key figures from the open source world. The best way to think about how X works is to see it as a client/server system. The X server provides services to programs that have been developed to make the most of the graphical and networking capabilities that are available under the server and in the supported libraries. X.Org

. Reference

52

CHAPTER 3

Working with GNOME

provides versions for many different platforms, including Linux and Mac OS X. Originally implemented as XFree86, X.Org was forked when a row broke out over certain restrictions that were going to be included in the XFree86 license. Taking a snapshot of code that was licensed under the previous version of the license, X.Org drove forward with its own implementation based on the code. Almost in unison, most Linux distributions turned their back on XFree86 and switched their development and efforts to X.Org. In this chapter you will learn how to work with GNOME and also the version of X that is included with Ubuntu. We will look at the fundamentals of X, as well as how to get X to work with any upgrades that might affect it, such as a new graphics card or that new flat panel display you just bought. We will also take a look at some of the other Window Managers that are included with Ubuntu, including KDE and Xfce.

The Ubuntu Family When people talk about Ubuntu, they generally mean the original distribution launched in 2004 which uses the GNOME window manager. However, there are a number of derivatives of Ubuntu which use other window managers and they are freely available for you to download and use. For instance, Kubuntu uses the KDE window manager while Xubuntu uses Xfce instead. Despite their very visual differences, all three rely on the same core system, and it is also easy for you to add that window manager to your existing system by using one of the *-desktop meta-packages. These packages are designed to install all the base applications that are linked to that version of Ubuntu, so installing the kubuntu-desktop package would automatically install all the software needed for Kubuntu, while also retaining your existing desktop environment.

The GNOME Desktop Environment A desktop environment for X provides one or more window managers and a suite of clients that conform to a standard graphical interface based on a common set of software libraries. When they are used to develop associated clients, these libraries provide graphical consistency for the client windows, menus, buttons, and other onscreen components, along with some common keyboard controls and client dialogs. The following sections discuss the primary desktop environment that is included with Ubuntu: GNOME.

GNOME: The GNU Network Object Model Environment The GNOME project, which was started in 1997, is the brainchild of programmer whiz Miguel de Icaza. GNOME provides a complete set of software libraries and clients. GNOME depends on a window manager that is GNOME-aware. This means that to provide a graphical desktop with GNOME elements, the window manager must be written to recognize and use GNOME. Some compliant window managers that are GNOME-aware include Compiz (the default GNOME window manager in Ubuntu), Enlightenment, Metacity, Window Maker, IceWM, and beryl. Ubuntu uses GNOME’s user-friendly suite of clients to provide a consistent and userfriendly desktop. GNOME clients are found under the /usr/bin directory, and GNOME

The GNOME Desktop Environment

53

configuration files are stored under the /etc/gnome and /usr/share/gnome directories, with user settings stored in the home directory under .gnome and .gnome2. A representative GNOME desktop, running the removable media preferences tool used for setting actions to events, is shown in Figure 3.1.

3 FIGURE 3.1 Ubuntu’s GNOME desktop uses the Compiz window manager and offers a selection of GNOME themes. You can configure your desktop in various ways and by using different menu items under the Preferences menu, which can be found as part of the main Desktop menu. The myriad of configurations options allow you to tailor every aspect of your system’s look and feel. In Figure 3.2 you can see a selection of the preferences options available to you.

FIGURE 3.2 You can customize your Ubuntu desktop by using the Preference settings that are available in the System, Preferences menu.

54

CHAPTER 3

Working with GNOME

Eye Candy for the Masses Recent development work carried out on X has allowed the introduction of a number of hardware-accelerated effects within Ubuntu and its window managers. No longer do you have to drool at your Mac OS X-using colleagues when they work; now Ubuntu has a whole load of “wow” effects designed to add that professional touch to Linux. Up until now, enabling these desktop effects has required a lot of work involving downloading specific packages and also configuring some of them using the console. However, with Ubuntu 8.04 this has been done away with and desktop effects are available out of the box, depending on whether your graphics card is powerful enough. Ubuntu relies upon the Compiz window manager, which to most end users will not appear any differently to Metacity, the standard window manager in use by Ubuntu. You should already have the latest graphics card driver for your system as Ubuntu automatically gives you access to the proprietary driver through the Restricted Driver Manager. Check out Chapter 2, “Post-Installation Configuration,” for more information on this tool. Once you have verified your graphic driver situation, you will find a menu option under System, Preferences called Appearance (see Figure 3.3). Open it up and select the tab called Visual Effects. By default this is set to Normal, but try setting it to Extra and see what happens. After a couple of seconds you may see your window decorations (title bar, minimize and maximize buttons) disappear and then reappear. It may seem that nothing has happened but grab hold of the window title bar and move it around. If everything has gone according to plan then it should wobble! Click Close to save the settings and welcome to a world of fancy effects.

FIGURE 3.3 Use the Visual Effects tool to set the scene for some snazzy 3D effects.

Basic X Concepts

55

The most obvious effect is that of “wobbly windows”, which provide a fluid effect when you move your windows around the desktop area. Other effects include a smooth wipe from Desktop 1 to Desktop 2, activated by pressing Ctrl-Alt and either the left or right cursor key.

Basic X Concepts

NOTE What better way to demonstrate the capability of X to handle remote clients than by using its capabilities to produce this chapter. Although the OpenOffice.org file for this chapter resided on a Mac mini (running Ubuntu), the display and keyboard used were actually part of an Acer Ferrari notebook running Ubuntu 7.10, via an ethernet connection. Revisions were done using a Logitech keyboard and mouse of a desktop machine running Ubuntu 7.04, again connected to the Mac mini via X, but this time using a wireless connection.

Because X offers users a form of distributed processing, this means that Ubuntu can be used as a very cheap desktop platform for clients that connect to a powerful X server. The more powerful the X server, the larger the number of X-based clients that can be accommodated. This functionality can breathe new life into older hardware, pushing most of the graphical processing on to the server. A fast network is a must if you intend to run many X clients because X can become bandwidth-hungry. X is hugely popular in the UNIX and Linux world for a variety of reasons. The fact that it supports nearly every hardware graphics system is a strong point, as well as strong multiplatform programming standards give it a solid foundation of developers committed to X. Another key benefit of X is its networking capability, which plays a central point in administration of many desktops and can also assist in the deployment of a thin-client computing environment. Being able to launch applications on remote desktops and also standardize installations serve to highlight the versatility of this powerful application. More recent versions of X have also included support for shaped windows (that is, nonrectangular), graphical login managers (also known as display managers), and compressed fonts. Each release of X brings more features designed to enhance the user experience, including being able to customize how X client applications appear, right down to buttons

3

The underlying engine of X11 is the X protocol, which provides a system of managing displays on local and remote desktops. The protocol uses a client/server model that allows an abstraction of the drawing of client windows and other decorations locally and over a network. An X server draws client windows, dialog boxes, and buttons that are specific to the local hardware and in response to client requests. The client, however, does not have to be specific to the local hardware. This means that system administrators can set up a network with a large server and clients and enable users to view and use those clients on workstations with totally different CPUs and graphics displays.

56

CHAPTER 3

Working with GNOME

and windows. Most office and home environments run Linux and X on their local machines. The more-enlightened companies and users harness the power of the networking features of X, enabling thin-client environments and allowing the use of customized desktops designed specifically for that company. Having applications launch from a single location makes the lives of system administrators a lot easier because they have to work on only one machine, rather than several.

Using X X.Org 7.3 is the X server that is used with Ubuntu. The base Xorg distribution consists of 30 packages (almost 120MB), which contain the server, along with support and development libraries, fonts, various clients, and documentation. An additional 1,000 or more X clients, fonts, and documentation are also included with Ubuntu.

NOTE A full installation of X and related X.Org 7.4 files can consume more—usually much more—than 170MB of hard drive space. This is because additional clients, configuration files, and graphics (such as icons) are under the /usr/bin and /usr/share directory trees. You can pare excessive disk requirements by judiciously choosing which X-related packages (such as games) to install on workstations. However, with the increased capacity of most desktop PC hard drives today, the size requirements are rarely a problem, except in configuring thin-client desktops or embedded systems.

The /usr directory and its subdirectories contain the majority of Xorg’s software. Some important subdirectories are . /usr/bin—This is the location of the X server and various X clients. (Note that not all X clients require active X sessions.) . /usr/include—This is the path to the files necessary for developing X clients and graphics such as icons. . /usr/lib—This directory contains required software libraries to support the X server and clients. . /usr/lib/X11—This directory contains fonts, default client resources, system resources, documentation, and other files that are used during X sessions and for various X clients. You will also find a symbolic link to this directory, named X11, under the /usr/lib directory. . /usr/lib/modules—This path to drivers and the X server modules used by the X server enables use of various graphics cards. The main components required for an active local X session are installed on your system if you choose to use a graphical desktop. These components are the X server, miscellaneous fonts, a terminal client (that is, a program that provides access to a shell prompt), and a

Using X

57

client known as a window manager. Window managers, which are discussed later in this chapter (see the section “Selecting and Using Window Managers”), administer onscreen displays, including overlapping and tiling windows, command buttons, title bars, and other onscreen decorations and features.

Elements of the xorg.conf File

Bullet Proof X Ubuntu 8.04 LTS comes with a rather useful feature called Bullet Proof X. In short, it is designed to work no matter what may happen, so in the event of some cataclysmic event which destroys your main X system you will still have some graphical way of getting yourself back into a fully functional X-based system. Thanks to Bullet Proof X you shouldn’t need to edit your xorg.conf file, but it can be a good idea to understand what it is made up of, in case you ever need to troubleshoot an X problem. Let’s take a look at the contents of the file so that you can get an idea of what X is looking for. The components, or sections, of the xorg.conf file specify the X session or server layout, along with pathnames for files that are used by the server, any options relating directly to the server, any optional support modules needed, information relating to the mouse and keyboard attached to the system, the graphics card installed, the monitor in use, and of course the resolution and color depth that Ubuntu uses. Of the 12 sections of the file, these are the essential components: . ServerLayout—Defines the display, defines one or more screen layouts, and names input devices. . Files—Defines the location of colors, fonts, or port number of the font server. . Module—Tells the X server what graphics display support code modules to load. . InputDevice—Defines the input devices, such as the keyboard and mouse; multiple devices can be used. . Monitor—Defines the capabilities of any attached display; multiple monitors can be used. . Device—Defines one or more graphics cards and specifies what optional features (if any) to enable or disable. . Screen—Defines one or more resolutions, color depths, perhaps a default color depth, and other settings.

3

The most important file for Xorg is the xorg.conf configuration file, which can be located in the /etc/X11 directory. This file contains configuration information that is vital for X to function correctly, and is usually created during the installation of Ubuntu. Should you need to change anything post-install, you should use the system-config-display application, which we cover later in this chapter. Information relating to hardware, monitors, graphics cards, and input devices is stored in the xorg.conf file, so be careful if you decide to tinker with it in a text editor!

58

CHAPTER 3

Working with GNOME

The following sections provide short descriptions of these elements; the xorg.conf man page contains full documentation of all the options and other keywords you can use to customize your desktop settings. The ServerLayout Section As noted previously, the ServerLayout section of the xorg.conf file defines the display and screen layouts, and it names the input devices. A typical ServerLayout section from an automatically configured xorg.conf file might look like this: Section “ServerLayout” Identifier Screen 0 InputDevice InputDevice InputDevice EndSection

“single head configuration” “Screen0” 0 0 “Mouse0” “CorePointer” “Keyboard0” “CoreKeyboard” “DevInputMice” “AlwaysCore”

In this example, a single display is used (the numbers designate the position of a screen), and two default input devices, Mouse0 and Keyboard0, are used for the session. The Files Section The Files section of the xorg.conf file might look like this: Section “Files” RgbPath “/usr/lib/X11/rgb” FontPath “unix/:7100” EndSection

This section lists available session colors (by name, in the text file rgb.txt) and the port number to the X font server. The font server, xfs, is started at boot time and does not require an active X session. If a font server is not used, the FontPath entry could instead list each font directory under the /usr/lib/X11/fonts directory, as in this example: FontPath “/usr/lib/X11/fonts/100dpi” FontPath “/usr/lib/X11/fonts/misc” FontPath “/usr/lib/X11/fonts/75dpi” FontPath “/usr/lib/X11/fonts/type1” FontPath “/usr/lib/X11/fonts/Speedo” ...

These directories contain the default compressed fonts that are available for use during the X session. The font server is configured by using the file named config under the /etc/X11/fs directory. This file contains a listing, or catalog, of fonts for use by the font server. By adding an alternate-server entry in this file and restarting the font server, you can specify remote font servers for use during X sessions. This can help centralize font support and reduce local storage requirements (even though only 25MB is required for the almost 5,000 fonts installed with Ubuntu and X) .

Using X

59

The Module Section The Module section of the xorg.conf file specifies loadable modules or drivers to load for the X session. This section might look like this:

EndSection

These modules can range from special video card support to font rasterizers. The modules are located in subdirectories under the /usr/lib/modules directory. The InputDevice Section The InputDevice section configures a specific device, such as a keyboard or mouse, as in this example: Section “InputDevice” Identifier “Keyboard0” Driver “kbd” Option “XkbModel” “pc105” Option “XkbLayout” “us” EndSection Section “InputDevice” Identifier “Mouse0” Driver “mouse” Option “Protocol” “IMPS/2” Option “Device” “/dev/input/mice” Option “ZAxisMapping” “4 5” Option EndSection

“Emulate3Buttons” “yes”

You can configure multiple devices, and there might be multiple InputDevice sections. The preceding example specifies a basic keyboard and a two-button PS/2 mouse (actually, a Dell touchpad pointer). An InputDevice section that specifies use of a USB device could be used at the same time (to enable mousing with PS/2 and USB pointers) and might look like this: Section “InputDevice” Identifier

“Mouse0”

3

Section “Module” Load “dbe” Load “extmod” Load “fbdevhw” Load “glx” Load “record” Load “freetype” Load “type1” Load “dri”

60

CHAPTER 3

Working with GNOME

Driver Option

“mouse” “Device” “/dev/input/mice”

Option Option

“Protocol” “IMPS/2” “Emulate3Buttons” “off”

Option EndSection

“ZAxisMapping” “4 5”

The Monitor Section The Monitor section configures the designated display device as declared in the ServerLayout section, as shown in this example: Section “Monitor” Identifier “Monitor0” VendorName “Monitor Vendor” ModelName “Monitor Model” DisplaySize 300 220 HorizSync 31.5-48.5 VertRefresh 50-70 Option “dpms” EndSection

Note that the X server automatically determines the best video timings according to the horizontal and vertical sync and refresh values in this section. If required, old-style modeline entries (used by distributions and servers prior to XFree86 4.0) might still be used. If the monitor is automatically detected when you configure X (see the “Configuring X” section, later in this chapter), its definition and capabilities are inserted in your xorg.conf file from the MonitorsDB database. This database contains more than 600 monitors and is located in the /usr/share/hwdata directory. The Device Section The Device section provides details about the video graphics chipset used by the computer, as in this example: Section “Device”

Identifier “Intel Corporation Mobile 945GM/GMS,\ 943/940GML Express Integrated Graphics Controller” Driver

“intel”

BusID

“PCI:0:2:0”

EndSection

Using X

61

This example identifies an installed video card as using an integrated Intel 945 graphics chipset. The Driver entry tells the Xorg server to load the intel kernel module. Different chipsets have different options. For example, here’s the entry for a NeoMagic video chipset: Section “Device” Identifier

“NeoMagic (laptop/notebook)”

In this example, the Device section specifies the driver for the graphics card (neomagic_drv.o) and enables two chipset options (externDisp and internDisp) to allow display on the laptop’s LCD screen and an attached monitor. The Xorg server supports hundreds of different video chipsets. If you configure X11 but subsequently change the installed video card, you need to edit the existing Device section or generate a new xorg.conf file, using one of the X configuration tools discussed in this chapter, to reflect the new card’s capabilities. You can find details about options for some chipsets in a companion man page. You should look at these sources for hints about optimizations and troubleshooting. The Screen Section The Screen section ties together the information from the previous sections (using the Screen0, Device, and Monitor Identifier entries). It can also specify one or more color depths and resolutions for the session. Here’s an example: Section “Screen” Identifier “Screen0” Device “Videocard0” Monitor “Monitor0” DefaultDepth 24 SubSection “Display” Viewport 0 0 Depth 16 Modes “1024x768” “800x600” “640x480” EndSubSection EndSection

In this example a color depth of thousands of colors and a resolution of 1024×768 is the default, with optional resolutions of 800×600 and 640×480. Multiple Display subsection entries with different color depths and resolutions (with settings such as Depth 24 for millions of colors) can be used if supported by the graphics card and monitor combina-

3

Driver “neomagic” VendorName “NeoMagic (laptop/notebook)” BoardName “NeoMagic (laptop/notebook)” Option “externDisp” Option “internDisp” EndSection

62

CHAPTER 3

Working with GNOME

tion. You can also use a DefaultDepth entry (which is 24, or thousands of colors, in the example), along with a specific color depth to standardize display depths in installations. You can also specify a desktop resolution larger than that supported by the hardware in your monitor or notebook display. This setting is known as a virtual resolution in the Display subsection. This allows, for example, an 800×600 display to pan (that is, slide around inside) a virtual window of 1024×768.

NOTE If your monitor and graphics card support multiple resolutions and the settings are properly configured, you can use the key combination of Ctrl+Alt+Keypad+ or Ctrl+Alt+Keypad- to change resolutions on the fly during your X session.

Configuring X Ubuntu usually does a good job of detecting your graphics card and monitor, although sometimes problems can arise if the PC’s video card is not recognized. If your display is not configured correctly then Ubuntu thankfully provides some tools to help you make changes to the way your display is set up. You can use the following configuration tools, among others, to create a working xorg.conf file: . displayconfig-gtk—This is Ubuntu’s graphical configuration tool, which launches a handy GUI tool to help create an xorg.conf file. . Xorg—The X server itself can create a skeletal working configuration.

FIGURE 3.4 The displayconfig-gtk client provides a graphical configuration interface for creating or updating a system’s xorg.conf file. Here you see the Screen Settings main screen, offering resolution and color-depth settings.

Using X

63

The following sections discuss how to use each of these software tools to create a working xorg.conf file. Configuring X with the displayconfig-gtk Client You can use the displayconfig-gtk client to create or update an xorg.conf file. You can start by clicking the Screens and Graphics menu item found under System, Administration

3 FIGURE 3.5 displayconfig-gtk’s hardware settings are used to configure a video card for X. if you are already running X. You will be asked to enter your password in order to open the application; once you’ve done this you’ll see a window similar to Figure 3.4.

FIGURE 3.6 You can scroll to select the correct graphics card to use for your X sessions.

64

CHAPTER 3

Working with GNOME

The Screen Settings window shows the current selected screen, along with details of the model, resolutions available, the refresh rate, and orientation. In the event that you are using two screens (dual- or multi-head displays) then you have the ability to select whether it is the primary or secondary screen, and the physical location of it. If you click the Graphics Card tab, other configuration options become available, as shown in Figure 3.5. Click the name of the graphics card to open up a list of alternative cards (shown in Figure 3.6). Simply select a manufacturer to see a list of cards associated with that manufacturer and to choose the correct one for your X sessions. When you have finished your changes to your X server settings, you can quickly test them to see if they will work by clicking the Test button. Ubuntu will then attempt to use your chosen settings, allowing you to either choose to keep them or revert back to the original settings. If you are happy with the new mode then click Keep Configuration. Finally click the OK button to close the dialog box. You may then see a dialog advising that you have to log out and then log back in (or exit your X session and restart X) to use the new settings. The new settings will be stored in a new xorg.conf file under the /etc/X11 directory. If you find that the new settings do not work, you can simply copy the backup xorg.conf file named xorg.conf.backup to xorg.conf in the same directory to revert to your original settings. Using Xorg to Configure X You can create the xorg.conf file manually by typing one from scratch using a text editor, but you can also create one automatically by using the Xorg server or configuration utilities (as discussed in the previous sections). As the root operator, you can use the following on the server to create a test configuration file: # X -configure

After you press Enter, a file named xorg.conf.new is created in root’s home directory, the /root directory. You can then use this file for a test session, like this: # X –config /root/xorg.conf.new

Starting X You can start X sessions in a variety of ways. The Ubuntu installer sets up the system to have Linux boot directly to an X session using a display manager (that is, an X client that provides a graphical login). After you log in, you use a local session (running on your computer) or, if the system is properly configured, an X session running on a remote computer on the network. Logging in via a display manager requires you to enter a username and password. You can also start X sessions from the command line. The following sections describe these two methods.

NOTE If you have used the Server install then your system will boot to a text login—see “Command Line Quickstart” in Chapter 4 for more details on what to do here.

Starting X

65

Using a Display Manager An X display manager presents a graphical login that requires a username and password to be entered before access is granted to the X desktop. It also allows you to choose a different desktop for your X session. Whether or not an X display manager is presented after you boot Linux is controlled by a runlevel—a system state entry in /etc/event.d/. The following runlevels as handled by Ubuntu are as follows: . 0 - halt (Do NOT set initdefault to this.) . 1 - Multiuser text mode . 6 - reboot (Do NOT set initdefault to this.) You may see mention of Runlevels 3 through 5; these can be ignored, as they are treated the same as Runlevel 2 in Ubuntu. Historically Ubuntu used the /etc/inittab file to handle runlevels, but with upstart this file no longer exists. Instead there are several files under the /etc/events.d/ directory, including an individual file for each of the virtual consoles (accessible by pressing Ctrl-Alt-F1 to F7). However, you are still able to create an inittab file, if you want to override any defaults held by Ubuntu. Make sure you create the inittab file as root and include at least one line similar to the following: id:1:initdefault:

This will force your system to start up in text mode.

FIGURE 3.7 You use gdmsetup to configure the gdmlogin screen when using gdm as a display manager.

3

. 2 - X – graphical multiuser mode

66

CHAPTER 3

Working with GNOME

Configuring gdm The gdm display manager is part of the GNOME library and client distribution included with Ubuntu and provides a graphical login when a system boots directly to X. Its login (which is actually displayed by the gdmlogin client) hosts pop-up menus of window managers, languages, and system options for shutting down (halting) or rebooting the workstation. Although you can edit (as root) gdm.conf under the /etc/gdm directory to configure gdm, a much better way to configure GNOME’s display manager is to use the gdmsetup client. You can use the gdmsetup client to configure many aspects of gdm. You launch this client from the System Menu, under Administration, Login Window. You will be prompted for your password and after you press Enter, you see the GDM Setup window, as shown in Figure 3.7. You can specify settings for security, remote network logins, the X server, and session and session chooser setup by clicking on the tabs in the GDM Setup dialog. On the General tab you’ll see a handful of options, mostly to do with security. Showing visual feedback when entering passwords can be reassuring if you’re not sure how many characters you’ve typed, although it can also pose a security risk if your password is a word closely associated with yourself. For instance, if your wife is named Bernice, and your password is seven characters long then it’s a good bet that your password might be bernice. By default this setting is switched on, but it’s more secure when it is turned off. Choosing circles rather than asterisks is a purely personal choice, and by default Ubuntu uses circles to show feedback when users enter passwords. Another fairly important security feature is the ability to prevent multiple logins from the same user. This might sound innocuous at first, but if your user account details have been compromised then someone else might be able to gain access to the system even while you’re using it. Ubuntu allows you to login multiple times simultaneously, and we strongly recommend that you disable it. Next you are able to select your default window manager. Depending on what you have installed, you may see KDE and/or Xfce listed here. You’ll also see a Failsafe entry for both GNOME and the terminal, which gives you access to stripped-down versions of both environments, in case anything prevents you from gaining access in the usual way. By default, Ubuntu uses the xclient script, which dictates your preferences. You can change this preference by pressing the F10 key when you log in and choosing a different window manager. You’ll be prompted whether you want to make the change permanent or onetime only. It’s simpler, however, to just change it in the drop-down menu here. The option to use a gtkRC file should be ignored as it is for use in further configuring GNOME using GTK itself, and is outside the scope of this book. For the canonical reference to GTK, head on over to http://library.gnome.org/devel/gtk/unstable/index.html. Finally you can force gdm to use the 24-hour clock format when logging in. In Figure 3.8 you can see the Local tab, which we look at in more detail now. The first option is to choose the style of greeter that will meet your users as they attempt to log on to the system. Ubuntu defaults to a graphical themed greeter, which is selected in the main selection area. You can change the selection by clicking one of the radio

Starting X

67

3

FIGURE 3.8 Customize how gdm will look to local users as they log on. buttons to choose another theme, or, if you like randomness, you can select the Random from Selected option from the Theme drop-down menu and select multiple themes. That way, every time you boot up you’ll see a different greeter depending on your selection. If you choose to see a plain greeter, then the window will change to that shown in Figure 3.9 to allow you to define your options. You can elect to use either a picture or a solid color to fill the screen, and by default Ubuntu selects a solid blue color in contrast with the usual brown coloring. You can play around with the settings, but we think you’ll prefer the graphical greeter. Moving on to the Remote tab, you can choose how people who log on remotely (that is, via the network) to your computer are greeted. You can choose to mirror the local greeter, or use a plain or themed greeter, depending on what you’ve selected for the local greeter. Whatever you select, it will provide a similar set of options as in the local tab, with the exception of the Configure XDMCP button in the bottom-right corner, shown in Figure 3.10.

68

CHAPTER 3

Working with GNOME

FIGURE 3.9 Keeping it simple is the order of the day for using the Plain greeter.

What Is XDMCP? XDMCP is a great way to show off the networking capabilities of X. It stands for the X Display Manager Control Protocol and it allows you to remotely access your computer using an X terminal. Remember earlier when you read that this book was put together using various displays and computers? The secret behind all of it is XDMCP.

Clicking the Configure XDMCP button takes you to another window that allows you to specify exactly how you want XDMCP to behave, as shown in Figure 3.11. For the most part, the default options are sufficient.

Starting X

69

3

FIGURE 3.10 XDMCP—your route to remote logins, wherever you are on your network.

FIGURE 3.11 If you have very specific XDMCP needs then you can use these options to tailor it to your requirements.

CHAPTER 3

70

Working with GNOME

FIGURE 3.12 Lock down or loosen gdm depending on your requirements.

TIP If you are not expecting many people to log on simultaneously via XDMCP, you may want to lower the Maximum remote sessions from its default of 16. That way you minimize the risk of unauthorized access to your system.

If you click the Close button on the dialog box, you will then be able to access your system from another Linux system by using XDMCP. The next tab in the gdm setup dialog box deals with accessibility. Unless you have a specific need to, we suggest you leave this tab alone and move on to the more important Security tab, shown in Figure 3.12. The first two options (Enable Automatic Login and Enable Timed Login) are pretty frightening in our opinion, and we’re grateful that they’re disabled by default. The first option, when activated, assumes that your system will always log in with the same user that you select in the drop-down menu. If you value your security at all, then you will never enable this on a computer that is actually used by end users, as it provides an open door to your system, inviting the would-be hacker to take a shot at wrecking your system. We’d also recommend never enabling the timed login feature, as this effectively does the same thing with the exception that you can set a time delay before Ubuntu logs in as the selected user.

Starting X

71

CAUTION We strongly recommend that you never set either of these two options. It’s the equivalent of leaving your car unlocked, with the windows rolled down and signs up around it saying “Steal Me.” Perhaps the only time you might consider selecting one or the other of these options is if you are creating a system that is designed to be used in a public access area, such as a kiosk or similar, where it would not be unusual for some dimwit to turn the computer off every so often! In this scenario, you may not be available to log on to the system and may prefer it to default to the locked-down account that you would have created.

3 Now that we have those two options out of the way, let’s take a look at some of the others on this screen. If you want to deter people from logging in, setting a login retry delay is one of the best ways of doing it. By setting this option, you force Ubuntu to wait the specified number of seconds before allowing the user to attempt logging in again, should he or she enter an incorrect password. Although not guaranteed to keep the determined hacker out of your system, it will nonetheless slow this person down, hopefully enough that you’ll notice something or someone is attempting to gain access. The Minimal UID option restricts logins to only those user accounts that have a UID of more than 1000. These are typically service accounts, but may include special accounts created by you that have a low UID. Make sure you don’t set this number higher than any of your actual user account IDs; otherwise, you’ll lock your users out of the system! The next two options (Allow Local and Allow Remote System Administrator Login), which govern logins by system administrators, are both disabled by default in Ubuntu. This disabling has to do with the way that Ubuntu handles system administration rights in that there is no “root” account to speak of. Check out the sidebar “The Root User” in Chapter 10, “Managing Users,” for more information on how Ubuntu handles the root user. If you enable the root account then you can enable these two check boxes to allow you to log in either locally or remotely (via XDMCP) as the root user. If you are having problems with gdm or X, then you may want to enable the debug messages option as doing so may help you troubleshoot problems with your system. You’ll commonly be asked to enable this option if you’ve made bug reports on Launchpad, the Ubuntu bug tracker. By default, Ubuntu is set to deny any TCP connections to the X server, thus restricting the ability to use X forwarding. Unless you have a very specific need, you should leave this setting as is.

72

CHAPTER 3

Working with GNOME

FIGURE 3.13 Include or exclude user accounts from appearing at login via the Users tab. The final four options use permissions to ascertain whether users should be allowed to log in or not. The first option only allows the user to log in if she owns her home directory. By default, when creating new users, Ubuntu automatically assigns the new user as the owner of his or her home directory, so you should not need to change this option. The other options on this tab allow you to restrict whether a user can log in based on the permissions applied to his or her home directory. By default, as long as your home directory has the correct group write permissions set on it, that user will be allowed to log in. For a more detailed discussion of permissions and user security, head on over to Chapter 10. Finally, the Users tab (see Figure 3.13) enables you to specify which users are shown in the gdm login greeter that appears if you choose to use the face browser. By default, all regular users are shown in the greeter, but you can specifically hide different accounts according to your preferences by adding them to the exclude group. All the changes that we’ve covered will take effect the next time you restart GNOME. Configuring kdm The kdm client, which is part of KDE (which we cover later), offers a graphical login similar to gdm. You configure kdm by running the System Settings option in the Kicker (K Menu).

Starting X

73

3 FIGURE 3.14 You configure kdm by choosing tabs and settings in the Login Manager dialog box. When the System Settings window opens, click the Advanced tab and click on the Login Manager icon to see the window shown in Figure 3.14. To make any changes to the KDE display manager while logged in as a regular user, you must first click the Administrator Mode button, and then enter your password. You can click on a tab in the Login Manager dialog to set configuration options. Options in these tabs allow you to control the login display, prompts, user icons, session management, and configuration of system options (for shutting down or rebooting). After you make your configuration choices in each tab, click the Apply button to apply the changes immediately; otherwise, the changes are applied when the X server restarts. Using the xdm Display Manager The xdm display manager is part of the Xorg distribution and offers a bare-bones login for using X. Although it is possible to configure xdm by editing various files under the /etc/X11/xdm directory, GNOME and KDE offer a greater variety of options in display manager settings. The default xdm login screen’s display is handled by the xsetroot client, which is included with Xorg.

74

CHAPTER 3

Working with GNOME

FIGURE 3.15 Use the Select Session option to select the desktop environment of your choice before you log in.

Changing Window Managers Ubuntu makes it fairly painless to switch to another window manager or desktop environment. By desktop environment, we refer to not only the window manager but also the suite of related applications such as productivity or configuration tools. First of all you need to ensure that you have the relevant desktop environment installed on your system and the easiest way to do this is by installing the relevant *-desktop package (as described earlier in the sidebar, “The Ubuntu Family”. You can do this either at the command line with a simple apt-get install kubuntu-desktop (in the case of a KDE desktop) or you can use synaptic to install the relevant packages; just search for desktop and look for Xubuntu or Kubuntu. Once the download and installation has completed (you might want to grab a coffee while you wait) you are all set to change environment. The first thing you need to do is to log out of Ubuntu by going to System, Quit. Then select the Log Out option. After a couple of seconds you will arrive at the graphical login prompt (as shown in Figure 3.15). At this point, press the F10 key to open the drop-down menu and click Select Session.

XFce

75

3 FIGURE 3.16 When you’re ready to switch to another environment, use the Login Window to make the jump. Here you can choose to switch your session to KDE (for example) and once you’ve clicked OK you’ll be asked whether you want to make this a permanent change or just for one session (i.e., to try it out). At this point, it’s probably better to choose ‘For this session only’. Enter your user name and password to log in to your new desktop environment. Don’t worry; because you selected For This Session Only you haven’t yet committed yourself to switching permanently. Take the opportunity to try the new environment and make your mind up if you want to switch to it full time. If you have made your mind up to switch to another environment full time then you can do it by taking one of two routes. The first one is to go to the Login Window (found under System, Administration, Login Window under GNOME and also found under the Kicker Menu, System, Login Window within KDE) and select the relevant window manager from the Default Session drop-down list, as shown in Figure 3.16.

76

CHAPTER 3

Working with GNOME

FIGURE 3.17 Unlimited customization options abound within KDE; just be prepared to switch!

FIGURE 3.18 XFce—lightweight and simplicity, molded together in a great package. Alternatively you can do it from the login window by pressing F10, clicking Select Session, choosing your desired window manager and selecting Make Default. This will set your default window manager to your specific choice. Regardless of which route you take it’s easy to change back should you not like your new environment.

XFce

77

The next section gives you a brief introduction to the two other main window managers other than GNOME that are available either in Kubuntu or Xubuntu.

KDE—The Other Environment One of the great things about Ubuntu is the choice it allows you. When Ubuntu was originally released, it favored the GNOME desktop, but fairly early on the decision was made to create a KDE alternative named Kubuntu. If you install the kubuntu-desktop package (either using apt-get or synaptic) then you will have access to KDE and the associated Kubuntu applications.

3

78

CHAPTER 3

Working with GNOME

KDE is somewhat different from GNOME in that it uses the QT libraries rather than GTK libraries, so the windows and other elements look different. Linus Torvalds himself has in the past expressed a distinct preference for KDE, and it also helps that KDE allows you to customize your working environment in pretty much any way imaginable. A standard KDE desktop is shown in Figure 3.17.

XFce XFce is another desktop environment, suitable for computers with not much memory or processing power. It’s based upon the same GTK libraries that are in use by GNOME, so it shares some of the look and feel of the GNOME desktop. That said, it comes bundled with a number of Xfce-specific applications to replace GNOME tools such as nautilus. Some people just prefer the simplicity of Xfce, so we will leave it up to you if you want to use it. You can get access to it by installing the xubuntu-desktop package (either with aptget or synaptic) and a sample desktop is shown in Figure 3.18.

Reference . http://www.x.org/—Curators of the X Window System. . http://www.x.org/Downloads_mirror.html—Want to download the source to the latest revision of X? Start at this list of mirror sites. . http://www.xfree86.org/—Home of The XFree86 Project, Inc., which provided a graphical interface for Linux for nearly 10 years. . http://www.kde.org/—The place to get started when learning about KDE and the latest developments. . http://www.gnome.org/—The launch point for more information about GNOME, links to new clients, and GNOME development projects. . http://www.compiz.org/—The official page for the Compiz project, including Compiz Fusion, a set of plugins for the Compiz window manager. . http://www.xfce.org/—The official home page for the XFce project.

CHAPTER

4


IN THIS CHAPTER . What Is the Command Line? . Logging Into and Working with Linux . Getting to the Command Line . Using the Text Editors . Working with Permissions

The command line is one of the most powerful tools

. Working as Root

available for use with Ubuntu, and indeed Linux. Knowledge of the commands associated with it and also how to string them together will make your life with Ubuntu much easier.

. Reading Documentation

This chapter looks at some of the basic commands that you need to know to be productive at the command line. You will find out how to get to the command line, and also get to grips with some of the commands used to navigate around the file system. Later on in this book is the Command Line Masterclass (Chapter 30), which explores the subject in more depth. The skills you learn in this chapter will give you confidence when you’re called upon to work at the command line.

What Is the Command Line? Hang around Linux users for any length of time and it will not be long before you hear them speak in hushed tones about the command line or the terminal. Quite rightly too, as the command line offers a unique and powerful way to interact with Linux. However, for the most part you may never need to access the command line because Ubuntu offers a slew of graphical tools that enable you to configure most things on your system. But sometimes things go wrong and you may not have the luxury of a graphical interface to work with. It is in these situations that a fundamental understanding of the command line and its uses can be a real life saver.

. Reference

CHAPTER 4

80


NOTE In Chapter 3, “Working with Gnome,” you learned about BulletProofX, a project whose goal it is to always provide a fallback if your X server fails. Under Ubuntu 9.10, this has been further improved, although there will still be some instances where even BulletProofX won’t save you. Don’t be tempted to skip over this chapter as irrelevant; rather, work through the chapter and ensure that you are comfortable with the command line before moving on.

It is tempting to think of the command line as the product of some sort of black and arcane art, and in some ways it can appear to be extremely difficult and complicated to use. However, perseverance is key and by the end of this chapter you should at least be comfortable with using the command line and ready to move onto Chapter 30, “Command Line Masterclass.” More importantly, though, you will be able to make your way around a command line–based system, which you are likely to encounter if you work within a server environment. This chapter introduces you to a number of commands, including commands that enable you to do the following tasks: . Perform routine tasks—Logging in and out, using the text console, changing passwords, listing and navigating directories . Implement basic file management—Creating files and folders, copying or moving them around the file system, renaming and ultimately deleting them (if necessary) . Execute basic system management—Shutting down or rebooting, reading man pages, and using text-based tools to edit system configuration files The information in this chapter is valuable for individual users or system administrators who are new to Linux and are learning to use the command line for the first time.

TIP Those of you who have used a computer for many years will probably have come into contact with MS-DOS, in which case being presented with a black screen will fill you with a sense of nostalgia. Don’t get too comfy; the command line in Linux is far superior to its distant MS-DOS cousin. Whereas MS-DOS skills are transferable only to other MS-DOS environments, the skills that you learn at the Linux command line can be transferred easily to other Unix-like operating systems, such as Solaris, OpenBSD, FreeBSD, and even Mac OS X, which allows you access to the terminal.

What Is the Command Line?

81

User Accounts

One concept you will have to get used to is that of user-based security. By and large, only two types of users will access the system as actual users. The first type is the regular user, of which you created one when you started Ubuntu for the first time (see Chapter 1, “Installing Ubuntu”). These users can change anything that is specific to them, such as the wallpaper on the desktop, their personal preferences, and so on. Note that the emphasis should be on anything that is specific to them, as it prevents regular users from making system-wide changes that could affect other users.

An example of the destructive nature of working as the super-user can be found in the age-old example of $sudo rm -rf /, which erases all the data on your hard drive. You need to be especially careful when using your super-user privileges, otherwise you may make irreparable damage to your system. Don’t let this worry you, though, as the ability to work as the super-user is fundamental to a healthy Linux system. Without it you would not be able to install new software, edit system configuration files, or do any number of administration tasks. By the end of this chapter you will feel comfortable working with your super-user privileges and be able to adequately administer your system. Ubuntu works slightly differently to other Linux distributions by giving users super-user privileges by default. If you work with any other Linux distro you will quickly come across the root user, which is a super-user account. So rather than having to type in sudo before every command, the root account can simply issue the command and not have to worry about entering a password. You can tell when you are working at a root prompt because you will see the pound sign (#). Within Ubuntu the root account is disabled by default in preference to giving super-user privileges to users. If you wish to enable the root account then issue the command sudo passwd. When prompted, enter your user password. You will then be asked for a new UNIX password; this will be the password for the root account, so make sure and remember it. You will also be prompted to repeat the password, in case you’ve made any mistakes. Once you’ve typed it in and pressed Enter, the root account will now be active. You’ll find out how to switch to root later on. An alternative way of getting a root prompt, without having to enable the root account, is to issue the command sudo -i. After entering your password you will find yourself at a root prompt (#). Do what you need to do and when you are finished, type exit and press Enter to return to your usual prompt.

4

To make system-wide changes, you need to use super-user privileges which you should have if your account was the first one specified (i.e. when you specified a user during the installation). With super-user privileges you basically have access to the entire system and can carry out any task, even destructive ones! In order to use your superuser privileges you need to prefix the command you wish to execute with the command sudo. When you hit enter (after typing the remaining command) you will be prompted for your password, which you should type in followed by the Enter key. Ubuntu will then carry out the command, but with super-user privileges.

CHAPTER 4

82


As with most things, Ubuntu offers you a number of ways to access the command line. You can use the Terminal entry in Applications, Accessories, but by far the simplest way is to press Ctrl + Alt + F1. Ubuntu switches to a black screen and a traditional login prompt that resembles the following: Ubuntu 9.10 karmic karmic-dev ttyl karmic-dev login:

TIP This is actually one of six virtual consoles that Ubuntu provides for your use. After you have accessed a virtual console, you can use the Alt key and F1 through F6 to switch to a different console. If you want to get back to the graphical interface, press Alt + F7. You can also switch between consoles by holding the Alt key and pressing either the left or the right cursor key to move down or up a console, such as tty1 to tty2.

Ubuntu is waiting for you to log in as a user, so go ahead and enter your username and press the return key. Ubuntu then prompts you for your password, which you should enter. Note that Ubuntu does not show any characters while you are typing your password in. This is a good thing because it prevents any shoulder surfers from seeing what you’ve typed or the length of the password. Hitting the Return key drops you to a shell prompt, signified by the dollar sign: andrew@karmic-dev ~]$

This particular prompt tells me that I am logged in as the user andrew on the system karmic-dev and I am currently in my home directory (Linux uses the tilde as shorthand for the home directory).

TIP Navigating through the system at the command line can get confusing at times, especially when a directory name occurs in several different places. Fortunately, Linux includes a simple command that tells you exactly where you are in the file system. It’s easy to remember because the command is just an abbreviation of present working directory, so type pwd at any point to get the full path of your location. For example, typing pwd after following these instructions shows /home/yourusername, meaning that you are currently in your home directory. Using the pwd command can save you a lot of frustration when you have changed directory half a dozen times and have lost track.

Another way to quickly access the terminal is to go to Applications, Accessories and choose the Terminal entry. Ubuntu opens up gnome-terminal, which allows you to access


83

the terminal while remaining in Gnome. This time, the terminal appears as black text on a white background. Accessing the terminal this way, or by using the Ctrl + Alt + F1 method makes no difference because you are interacting directly with the terminal itself.

Navigating Through the File System Use the cd command to navigate through the Ubuntu file system. This command is generally used with a specific directory location or pathname, like this: $ cd /etc/apt/

Under Ubuntu, the cd command can also be used with several shortcuts. For example, to quickly move up to the parent (higher-level) directory, use the cd command like this:

To return to one’s home directory from anywhere in the Linux file system, use the cd command like this: $ cd

You can also use the $HOME shell environment variable to accomplish the same thing. Type this command and press Enter to return to your home directory: $ cd $HOME

You can accomplish the same thing by using the tilde (~) like this: $ cd ~

Don’t forget the pwd command to remind you where you are within the file system! Another important command to use is the ls command, which lists the contents of the current directory. It’s commonly used by itself, but a number of options (or switches) available for ls give you more information. For instance, the following command returns a listing of all the files and directories within the current directory, including any hidden files (denoted by a . prefix) as well as a full listing, so it will include details such as the permissions, owner and group, size and last modified time and date: $ ls -al

You can also issue the command $ ls -R

which scans and lists all the contents of the sub-directories of the current directory. This might be a lot of information, so you may want to redirect the output to a text file so you can browse through it at your leisure by using the following: $ ls -alR > listing.txt

4

$ cd ..

CHAPTER 4

84


TIP The previous command sends the output of ls -alR to a file called listing.txt, and demonstrates part of the power of the Linux command line. At the command line you are able to use files as inputs to commands, or generate files as outputs as shown. For more information about combining commands, see Chapter 30.

We’ve included a table showing some of the top-level directories that are part of a standard Linux distro in Table 4.1.

TABLE 4.1 Basic Linux Directories Name

Description

/

The root directory

/bin

Essential commands

/boot

Boot loader files, Linux kernel

/dev

Device files

/etc

System configuration files

/home

User home directories

/initrd

Initial RAM disk boot support (used during boot time)

/lib

Shared libraries, kernel modules

/lost+found

Directory for recovered files (if found after a file system check)

/media

Mount point for removable media, such as DVDs and floppy disks

/mnt

Usual mount point for local, remote file systems

/opt

Add-on software packages

/proc

Kernel information, process control

/root

Super-user (root) home

/sbin

System commands (mostly root only)

/srv

Holds information relating to services that run on your system

/sys

Real-time information on devices used by the kernel

/tmp

Temporary files

/usr

Secondary software file hierarchy

/var

Variable data (such as logs); spooled files

Knowing these directories can aid you in partitioning in any future systems, letting you choose to put certain directories on their own distinct partition. Some of the important directories in Table 4.1, such as those containing user and root commands or system configuration files, are discussed in the following sections. You use and edit files under these directories when you use Ubuntu.


85

Linux also includes a number of GNU commands you can use to search the file system. These include the following: . whereis command—Returns the location of the command and its man page. . whatis command—Returns a one-line synopsis from the command’s man page. . locate file—Returns locations of all matching file(s); an extremely fast method of searching your system because locate searches a database containing an index of all files on your system. However, this database (about 4MB in size and named slocate.db, under the /var/lib/slocate directory) is built daily at 4:20 a.m. by default, and does not contain pathnames to files created during the workday or in the evening. If you do not keep your machine on constantly, you can run the updatedb command either using sudo or by using the root account to manually start the building of the database.

Managing Files with the Shell Managing files in your home directory involves using one or more easily remembered commands. If you have any familiarity with the now-ancient DOS, you recognize some of these commands (although their names are different from those you remember). Basic file management operations include paging (reading), moving, renaming, copying, searching, and deleting files and directories. These commands include the following: . cat filename—Outputs contents of filename to display . less filename—Allows scrolling while reading contents of filename . mv file1 file2—Renames file1 to file2 . mv file dir—Moves file to specified directory . cp file1 file2—Copies file1 and creates file2 . rm file—Deletes file . rmdir dir—Deletes directory (if empty) . grep string file(s)—Searches through files(s) and displays lines containing matching string Note that each of these commands can be used with pattern-matching strings known as wildcards or expressions. For example, to delete all files in the current directory beginning with the letters abc, you can use an expression beginning with the first three letters of the desired filenames. An asterisk (*) is then appended to match all these files. Use a command line with the rm command like this: $ rm abc*

Linux shells recognize many types of filenaming wildcards, but this is different from the capabilities of Linux commands supporting the use of more complex expressions. You learn more about using wildcards in Chapter 11, “Automating Tasks.”

4

. apropos subject—Returns a list of commands related to subject.

CHAPTER 4

86


NOTE Learn more about using expressions by reading the grep manual pages (man grep).

Working with Compressed Files Another file management operation is compression and decompression of files, or the creation, listing, and expansion of file and directory archives. Linux distributions usually include several compression utilities you can use to create, compress, expand, or list the contents of compressed files and archives. These commands include . bunzip2—Expands a compressed file . bzip2—Compresses or expands files and directories . gunzip—Expands a compressed file . gzip—Compresses or expands files and directories . tar—Creates, expands, or lists the contents of compressed or uncompressed file or directory archives known as tape archives or tarballs Most of these commands are easy to use. The tar command, however, has a somewhat complex (although capable) set of command-line options and syntax. Even so, you can quickly learn to use tar by remembering a few simple invocations on the command line. For example, to create a compressed archive of a directory, use tar’s czf options like this: $ tar czf dirname.tgz dirname

The result is a compressed archive (a file ending in .tgz) of the specified directory (and all files and directories under it). Add the letter v to the preceding options to view the list of files added during compression and archiving. To list the contents of the compressed archive, substitute the c option with the letter t, like this: $ tar tzf archive

Of course, if many files are in the archive, a better invocation (to easily read or scroll through the output) is $ tar tzf archive | less

TIP In the previous code example, we used a pipe character (|). Each pipe sends the output of the first command to the next command. This is another of the benefits of the command line under Linux—you can string several commands together to get the desired results.

To expand the contents of a compressed archive, use tar’s zxf options, like so: $ tar zxf archive


87

The tar utility decompresses the specified archive and extracts the contents in the current directory.

Use Essential Commands from the /bin and /sbin Directories The /bin directory (about 5MB if you do a full install) contains essential commands used by the system for running and booting Linux. In general, only the root operator uses the commands in the /sbin directory. Many (though not all) these commands are statically linked which means that such commands do not depend on software libraries residing under the /lib or /usr/lib directories. Nearly all the other applications on your system are dynamically linked—meaning that they require external software libraries (also known as shared libraries) to run.

Use and Edit Files in the /etc Directory

. fstab—The file system table is a text file listing each hard drive, CD-ROM, floppy, or other storage device attached to your PC. The table indexes each device’s partition information with a place in your Linux file system (directory layout) and lists other options for each device when used with Linux (see Chapter 32, “Kernel and Module Management”). Nearly all entries in fstab can be manipulated by root using the mount command. . modprobe.d/—This folder holds all the instructions to load kernel modules that are required as part of the system startup, and replaces the historic modprobe.conf file. . passwd—The list of users for the system, along with user account information. The contents of this file can be changed by various programs, such as useradd or chsh. . shells—A list of approved shells (command-line interfaces).

Protect the Contents of User Directories—/home The most important data on a Linux system resides in the user’s directories, found under the /home directory. Segregating the system and user data can be helpful in preventing data loss and making the process of backing up easier. For example, having user data reside on a separate file system or mounted from a remote computer on the network might help shield users from data loss in the event of a system hardware failure.

Use the Contents of the /proc Directory to Interact with the Kernel The content of the /proc directory is created from memory and exists only while Linux is running. This directory contains special “files” that either extract information from or send information to the kernel. Many Linux utilities extract information from dynamically created directories and files under this directory, also known as a virtual file system. For example, the free command obtains its information from a file named meminfo:

4

More than 10MB of system configuration files and directories reside under the /etc directory if you install all the software included with this book. Some major software packages, such as Apache, OpenSSH, and xinetd, have directories of configuration files under /etc. Other important system-related configuration files in /etc are

88

CHAPTER 4


$ free total

used

free

shared

buffers

cached

Mem: 1026320 -/+ buffers/cache:

822112 299468

204208 726852

0

41232

481412

0

2031608

Swap:

2031608

This information constantly changes as the system is used. You can get the same information by using the cat command to see the contents of the meminfo file: $ cat /proc/meminfo MemTotal: 1026320 MemFree: 204200 Buffers: 41252 Cached: 481412 SwapCached: 0 Active: 307232 Inactive: 418224 HighTotal: 122692 HighFree: 244 LowTotal: 903628 LowFree: 203956 SwapTotal: 2031608 SwapFree: 2031608

kB kB kB kB kB kB kB kB kB kB kB kB kB

Dirty: Writeback: AnonPages: Mapped: Slab:

0 0 202804 87864 21736

kB kB kB kB kB

12484 9252 5060 0 0 2544768 712024 114680 6016

kB kB kB kB kB kB kB kB kB

SReclaimable: SUnreclaim: PageTables: NFS_Unstable: Bounce: CommitLimit: Committed_AS: VmallocTotal: VmallocUsed:

VmallocChunk: 108148 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 Hugepagesize:

4096 kB

The /proc directory can also be used to dynamically alter the behavior of a running Linux kernel by “echoing” numerical values to specific files under the /proc/sys directory. For example, to “turn on” kernel protection against one type of denial of service (DOS) attack


89

known as SYN flooding, use the echo command to send the number 1 (one) to the following /proc path: $ sudo echo 1 >/proc/sys/net/ipv4/tcp_syncookies

Other ways to use the /proc directory include . Getting CPU information, such as the family, type, and speed from /proc/cpuinfo. . Viewing important networking information under /proc/net, such as active interfaces information under /proc/net/dev, routing information in /proc/net/route, and network statistics in /proc/net/netstat. . Retrieving file system information.

. Getting the kernel version in /proc/version, performance information such as uptime in /proc/uptime, or other statistics such as CPU load, swap file usage, and processes in /proc/stat.

Work with Shared Data in the /usr Directory The /usr directory contains software applications, libraries, and other types of shared data for use by anyone on the system. Many Linux system administrators give /usr its own partition. A number of subdirectories under /usr contain manual pages (/usr/share/man), software package shared files (/usr/share/name_of_package, such as /usr/share/emacs), additional application or software package documentation (/usr/share/doc), and an entire subdirectory tree of locally built and installed software, /usr/local.

Temporary File Storage in the /tmp Directory As its name implies, the /tmp directory is used for temporary file storage; as you use Linux, various programs create files in this directory.

Access Variable Data Files in the /var Directory The /var directory contains subdirectories used by various system services for spooling and logging. Many of these variable data files, such as print spooler queues, are temporary, whereas others, such as system and kernel logs, are renamed and rotated in use. Incoming electronic mail is usually directed to files under /var/spool/mail.

4

. Reporting media mount point information via USB; for example, the Linux kernel reports what device to use to access files (such as /dev/sda) if a USB camera or hard drive is detected on the system. You can use the dmesg command to see this information.

90

CHAPTER 4


Linux also uses /var for other important system services. These include the top-most File Transfer Protocol (FTP) directory under /var/ftp (see Chapter 18, “Remote File Serving with FTP”), and the Apache web server’s initial home page directory for the system, /var/www/html. (See Chapter 17, “Apache Web Server Management,” for more information on using Apache.)

Logging In to and Working with Linux You can access and use a Linux system in a number of ways. One way is at the console with a monitor, keyboard, and mouse attached to the PC. Another way is via a serial console, either by dial-up via a modem or a PC running a terminal emulator and connected to the Linux PC via a null modem cable. You can also connect to your system through a wired or wireless network, using the telnet or ssh commands. The information in this section shows you how to access and use the Linux system, using physical and remote text-based logins.

NOTE This chapter focuses on text-based logins and use of Linux. Graphical logins and using a graphical desktop are described in Chapter 3, “Working with Gnome.”

Text-based Console Login If you sit down at your PC and log in to a Linux system that has not been booted to a graphical login, you see a prompt similar to this one: Ubuntu 9.10 karmic karmic-dev ttyl karmic-dev login:

Your prompt might vary, depending on the version of Ubuntu you are using. In any event, at this prompt, type in your username and press Enter. When you are prompted for your password, type it in and press Enter.

NOTE Note that your password is not echoed back to you, which is a good idea. Why is it a good idea? Well, people are prevented from looking over your shoulder and seeing your screen input. It is not difficult to guess that a five-letter password might correspond to the user’s spouse’s first name!

Logging Out Use the exit or logout commands to exit your session. Type the command and press Enter. You are then returned to the login prompt. If you use virtual consoles, remember to exit each console before leaving your PC. (Otherwise, someone could easily sit down and use your account.)

Logging In to and Working with Linux

91

Logging In and Out from a Remote Computer Although you can happily log in on your computer, an act known as a local login, you can also log in to your computer via a network connection from a remote computer. Linuxbased operating systems provide a number of remote access commands you can use to log in to other computers on your local area network (LAN), wide area network (WAN), or the Internet. Note that not only must you have an account on the remote computer, but the remote computer must be configured to support remote logins—otherwise, you won’t be able to log in.

NOTE

The best and most secure way (barring future exploits) to log in to a remote Linux computer is to use the ssh or Secure Shell client. Your login and session are encrypted while you work on the remote computer. The ssh client features many different command-line options, but can be simply used with the name or IP address of the remote computer, like this: [andrew@karmic-dev ~]$ ssh 192.168.0.41 The authenticity of host ‘192.168.0.41 (192.168.0.41)’ can’t be established. RSA key fingerprint is e1:db:6c:da:3f:fc:56:1b:52:f9:94:e0:d1:1d:31:50. Are you sure you want to continue connecting (yes/no)? yes

The first time you connect with a remote computer using ssh, Linux displays the remote computer’s encrypted identity key and asks you to verify the connection. After you type yes and press Enter, you are warned that the remote computer’s identity (key) has been entered in a file named known_hosts under the .ssh directory in your home directory. You are also prompted to enter your password: Warning: Permanently added ‘192.168.0.41’ (RSA) \ to the list of known hosts. [email protected]’s password: andrew~$

After entering your password, you can then work on the remote computer. Again, everything you enter on the keyboard in communication with the remote computer is encrypted. Use the exit or logout commands to exit your session and return to the shell on your computer.

4

See Chapter 14, “Networking” to see how to set up network interfaces with Linux to support remote network logins and Chapter 11 to see how to start remote access services (such as sshd).

92

CHAPTER 4


Using Environment Variables A number of in-memory variables are assigned and loaded by default when the user logs in. These variables are known as shell environment variables, which can be used by various commands to get information about your environment, such as the type of system you are running, your home directory, and the shell in use. Environment variables are used by Linux operating systems to help tailor the computing environment of your system, and include helpful specifications and setup, such as default locations of executable files and software libraries. If you begin writing shell scripts, you might use environment variables in your scripts. Until then, you only need to be aware of what environment variables are and do. The following list includes a number of environment variables, along with descriptions of how the shell uses them: . PWD—To provide the name of the current working directory, used by the pwd command (such as /home/andrew/foo) . USER—To declare the user’s name, such as andrew . LANG—To set language defaults, such as English . SHELL—To declare the name and location of the current shell, such as /bin/bash . PATH—To set the default location of executable files, such as /bin, /usr/bin, and so on . TERM—To set the type of terminal in use, such as vt100, which can be important when using screen-oriented programs, such as text editors . MACHINE—To declare system type, system architecture, and so on

NOTE Each shell can have its own feature set and language syntax, as well as a unique set of default environment variables. See Chapter 15, “Remote Access for SSH and Telnet,” for more information about using the different shells included with Ubuntu.

At the command line, you can use the env or printenv commands to display these environment variables, like so: $ env SSH_AGENT_PID=5761 SHELL=/bin/bash DESKTOP_STARTUP_ID= TERM=xterm

Logging In to and Working with Linux

93

GTK_RC_FILES=/etc/gtk/gtkrc:/home/andrew/.gtkrc-1.2-gnome2 WINDOWID=56623199 USER=andrew ... USERNAME=andrew PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games DESKTOP_SESSION=default GDM_XSERVER_LOCATION=local

4

PWD=/usr/local LANG=en_GB.UTF-8 GNOME_KEYRING_PID=5714 GDM_LANG=en_GB.UTF-8 SHLVL=1 HOME=/home/andrew LOGNAME=andrew XDG_DATA_DIRS=/usr/local/share/:/usr/share/:/usr/share/gdm/ ... LESSOPEN=| /usr/bin/lesspipe %s WINDOWPATH=7 DISPLAY=:0.0 LESSCLOSE=/usr/bin/lesspipe %s %s COLORTERM=gnome-terminal XAUTHORITY=/home/andrew/.Xauthority _=/usr/bin/env

94

CHAPTER 4


OLDPWD=/usr/share/locale

This abbreviated list shows a few common variables. These variables are set by configuration or resource files contained in the /etc, /etc/skel, or user /home directory. You can find default settings for bash, for example, in /etc/profile, /etc/bashrc, .bashrc, or .bash_profile files installed in your home directory. Read the man page for bash for details about using these configuration files. One of the most important environment variables is $PATH, which defines the location of executable files. For example, if, as a regular user, you try to use a command that is not located in your $PATH (such as the imaginary command command), you will see something like this: $ command -bash: command: command not found

NOTE If the command that you’re trying to execute exists, but is not yet installed on your system, then Ubuntu will prompt you to install it, even giving you the correct command to do so.

However, you might know that command is definitely installed on your system, and you can verify this by using the whereis command, like so: $ whereis command command: /sbin/command

You can also run the command by typing its full pathname, or complete directory specification like this: $ /sbin/command

As you can see in this example, the command command is indeed installed. What happened is that by default, the /sbin directory is not in your $PATH. One of the reasons for this is that commands under the /sbin directory are normally intended to be run only by root. You can add /sbin to your $PATH by editing the file .bash_profile in your home directory (if you use the bash shell by default, like most Linux users). Look for the following line: PATH=$PATH:$HOME/bin

You can then edit this file, perhaps using the vi editor (discussed in this chapter), to add the /sbin directory like so: PATH=$PATH:/sbin:$HOME/bin

Using the Text Editors

95

Save the file. The next time you log in, the /sbin directory is in your $PATH. One way to use this change right away is to read in the new settings in .bash_profile by using the bash shell’s source command like so: $ source .bash_profile

You can now run commands located in the /sbin directory without the need to explicitly type the full pathname. Some Linux commands also use environment variables, for example, to acquire configuration information (such as a communications program looking for a variable such as BAUD_RATE, which might denote a default modem speed).

[andrew@laptop ~]$

You can change its appearance by using the PS1 variable like this: $ PS1=’$OSTYPE r00lz ->’

After you press Enter, you see linux-gnu r00lz ->

NOTE See the bash man page for other variables you can use for prompt settings.

Using the Text Editors Linux distributions include a number of applications known as text editors that you can use to create text files or edit system configuration files. Text editors are similar to word processing programs, but generally have fewer features, work only with text files, and might or might not support spell checking or formatting. The text editors range in features and ease of use, but are found on nearly every Linux distribution. The number of editors installed on your system depends on what software packages you’ve installed on the system.

4

To experiment with the environment variables, you can modify the PS1 variable to manipulate the appearance of your shell prompt. If you are working with bash, you can use its built-in export command to change the shell prompt. For example, if your default shell prompt looks like

96

CHAPTER 4


Some of the console-based text editors are . emacs—The comprehensive GNU emacs editing environment, which is much more than an editor; see the section “Working with emacs” later in this chapter . joe—Joe’s Own Editor, a text editor, which can be used to emulate other editors . nano—A simple text editor similar to the pico text editor included with the pine email program . vim—An improved, compatible version of the vi text editor (which we call vi in the rest of this chapter because it has a symbolic link named vi and a symbolically linked manual page) Note that not all text editors described here are screen oriented. Some of the text editors for the X Window System, which provide a graphical interface, such as menu bars, buttons, scrollbars and so on, are . gedit—A GUI text editor for GNOME . kate—A simple KDE text editor . kedit—Another simple KDE text editor A good reason to learn how to use a text-based editor, such as vi, is that system maintenance and recovery operations generally never take place during X Window sessions (negating the use of a GUI editor). Many larger, more complex and capable editors do not work when Linux is booted to its single-user or maintenance mode. If anything does go wrong with your system, you probably won’t be able to get into the X Window system, making knowledge and experience of using both the command line and text editors such as vi important. Make a point of opening some of the editors and playing around with them; you never know—you might just thank me someday! Another reason to learn how to use a text-based editor under the Linux console mode is so that you can edit text files through dial-up or network shell sessions because many servers do not host graphical desktops.

Working with vi The editor found on nearly every Unix and Linux system is, without a doubt, the vi editor, originally written by Bill Joy. This simple-to-use but incredibly capable editor features a somewhat cryptic command set, but you can put it to use with only a few commands. Although more experienced Unix and Linux users continue to use vi extensively during computing sessions, many newer users might prefer learning an easier-to-use text editor such as pico or GNU nano. Die-hard GNU fans and programmers definitely use emacs. That said, learning how to use vi is a good idea. You might need to edit files on a Linux system with a minimal install, or a remote server without a more extensive offering of installed text editors. Chances are better than good that vi will be available. You can start an editing session by using the vi command like this: $ vi file.txt

Using the Text Editors

97

The vi command works by using an insert (or editing) mode, and a viewing (or command) mode. When you first start editing, you are in the viewing mode. You can use your cursor or other navigation keys (as shown later) to scroll through the text. To start editing, press the i key to insert text or the a key to append text. When finished, use the Esc key to toggle out of the insert or append modes and into the viewing (or command) mode. To enter a command, type a colon (:), followed by the command, such as w to write the file, and press Enter. Although vi supports many complex editing operations and numerous commands, you can accomplish work by using a few basic commands. These basic vi commands are . Cursor movement—h, j, k, l (left, down, up, and right) . Delete character—x

. Mode toggle—Esc, Insert (or i) . Quit—:q . Quit without saving—:q! . Run a shell command—:sh (use ’exit’ to return) . Save file—:w . Text search—/

NOTE Use the vimtutor command to quickly learn how to use vi’s keyboard commands. The tutorial takes less than 30 minutes, and it teaches new users how to start or stop the editor, navigate files, insert and delete text, and perform search, replace, and insert operations.

Working with emacs Richard M. Stallman’s GNU emacs editor, like vi, is included with Ubuntu and nearly every other Linux distribution. Unlike other Unix and Linux text editors, emacs is much more than a simple text editor—it is an editing environment and can be used to compile

4

. Delete line—dd

CHAPTER 4

98


and build programs, act as an electronic diary, appointment book and calendar, compose and send electronic mail, read Usenet news, and even play games. The reason for this capability is that emacs contains a built-in language interpreter that uses the Elisp (emacs LISP) programming language. emacs is not installed in Ubuntu by default; instead you’ll need to install it using apt-get or synaptic. The package you need is simply emacs. You can start an emacs editing session like this_FIRST: $ emacs file.txt

TIP If you start emacs when using X11, the editor launches in its own floating window. To force emacs to display inside a terminal window instead of its own window (which can be useful if the window is a login at a remote computer), use the -nw command-line option like this: emacs -nw file.txt.

The emacs editor uses an extensive set of keystroke and named commands, but you can work with it by using a basic command subset. Many of these basic commands require you to hold down the Ctrl key, or to first press a meta key (generally mapped to the Alt key). The basic commands are listed in Table 4.2.

TABLE 4.2 Emacs Editing Commands Action

Command

Abort

Ctrl+g

Cursor left

Ctrl+b

Cursor down

Ctrl+n

Cursor right

Ctrl+f

Cursor up

Ctrl+p

Delete character

Ctrl+d

Delete line

Ctrl+k

Go to start of line

Ctrl+a

Go to end of line

Ctrl+e

Help

Ctrl+h

Quit

Ctrl+x, Ctrl+c

Save As

Ctrl+x, Ctrl+w

Save file

Ctrl+x, Ctrl+s

Search backward

Ctrl+r

Search forward

Ctrl+s

Start tutorial

Ctrl+h, t

Undo

Ctrl+x, u

Working with Permissions

99

TIP One of the best reasons to learn how to use emacs is that you can use nearly all the same keystrokes to edit commands on the bash shell command line. Another reason is that like vi, emacs is universally available on nearly every Unix and Linux system, including Apple’s Mac OS X.


You can examine the default permissions for a file you create by using the umask command, or as a practical example, by using the touch command and then the ls command’s long-format listing like this: $ touch file $ ls -l file -rw-r—r— 1 andrew andrew 0 Feb 1 20:54 file

In this example, the touch command is used to quickly create a file. The ls command then reports on the file, displaying information (from left to right) in the first field of output (such as -rw-r—r— previously): . The type of file created—Common indicators of the type of file are a leading letter in the output. A blank (which is represented by a dash in the preceding example) designates a plain file, d designates a directory, c designates a character device (such as /dev/ttyS0), and b is used for a block device (such as /dev/sda). . Permissions—Read, write, and execute permissions for the owner, group, and all others on the system. (You learn more about these permissions later in this section.) . Number of links to the file—The number one (1) designates that there is only one file, whereas any other number indicates that there might be one or more hard-linked files. Links are created with the ln command. A hard-linked file is an exact copy of the file, but it might be located elsewhere on the system. Symbolic links of directories can also be created, but only the root operator can create a hard link of a directory. . The owner—The account that created or owns the file; you can change this designation by using the chown command. . The group—The group of users allowed to access the file; you can change this designation by using the chgrp command. . File size and creation/modification date—The last two elements indicate the size of the file in bytes and the date the file was created or last modified.

4

Under Linux (and Unix), everything in the file system, including directories and devices, is a file. And every file on your system has an accompanying set of permissions based on ownership. These permissions form the basis for security under Linux, and designate each file’s read, write, and execute permission for you, members of your group, and all others on the system.

100

CHAPTER 4


Assigning Permissions Under Linux, permissions are grouped by owner, group, and others, with read, write, and execute permission assigned to each, like so: Owner rwx

Group rwx

Others rxw

Permissions can be indicated by mnemonic or octal characters. Mnemonic characters are . r indicates permission for an owner, member of the owner’s group, or others to open and read the file. . w indicates permission for an owner, member of the owner’s group, or others to open and write to the file. . x indicates permission for an owner, member of the owner’s group, or others to execute the file (or read a directory). In the previous example for the file named file, the owner, andrew, has read and write permission, as does any member of the group named andrew. All other users may only read the file. Also note that default permissions for files created by the root operator will be different because of umask settings assigned by the shell. Many users prefer to use numeric codes, based on octal (base 8) values, to represent permissions. Here’s what these values mean: . 4 indicates read permission. . 2 indicates write permission. . 1 indicates execute permission. In octal notation, the previous example file has a permission setting of 664 (read + write or 4 + 2, read + write or 4 + 2, read-only or 4). Although you can use either form of permissions notation, octal is easy to use quickly after you visualize and understand how permissions are numbered.

NOTE In Linux, you can create groups to assign a number of users access to common directories and files, based on permissions. You might assign everyone in accounting to a group named accounting, for example, and allow that group access to accounts payable files while disallowing access by other departments. Defined groups are maintained by the root operator, but you can use the newgrp command to temporarily join other groups to access files (as long as the root operator has added you to the other groups). You can also allow or deny other groups’ access to your files by modifying the group permissions of your files.


101

Directory Permissions Directories are also files under Linux. For example, again use the ls command to show permissions like this: $ mkdir foo $ ls -ld foo drwxrwxr-x

2 andrew

andrew

4096 Jan 23 12:37 foo

In this example, the mkdir command is used to create a directory. The ls command and its -ld option is used to show the permissions and other information about the directory (not its contents). Here you can see that the directory has permission values of 775 (read + write + execute or 4 + 2 + 1, read + write + execute or 4 + 2 + 1, and read + execute or 4 + 1).

You should also notice that the ls command’s output shows a leading d in the permissions field. This letter specifies that this file is a directory; normal files have a blank field in its place. Other files, such as those specifying a block or character device, have a different letter. For example, if you examine the device file for a Linux serial port, you will see $ ls -l /dev/ttyS0 crw-rw—— 1 root dialout 4, 64 Feb 1 19:49 /dev/ttyS0

Here, /dev/ttyS0 is a character device (such as a serial communications port and designated by a c) owned by root and available to anyone in the dialout group. The device has permissions of 660 (read + write, read + write, no permission). On the other hand, if you examine the device file for an IDE hard drive, you see $ ls -l /dev/sda brw-rw—— 1 root disk 8, 0 Feb 1 19:49 /dev/sda

In this example, b designates a block device (a device that transfers and caches data in blocks) with similar permissions. Other device entries you will run across on your Linux system include symbolic links, designated by s. You can use the chmod command to alter a file’s permissions. This command uses various forms of command syntax, including octal or a mnemonic form (such as u, g, o, or a and rwx, and so on) to specify a desired change. The chmod command can be used to add, remove, or modify file or directory permissions to protect, hide, or open up access to a file by other users (except for root, which can access any file or directory on a Linux system).

4

This shows that the owner and group members can read and write to the directory and, because of execute permission, also list the directory’s contents. All other users can only list the directory contents. Note that directories require execute permission for anyone to be able to view their contents.

102

CHAPTER 4


The mnemonic forms of chmod’s options (when used with a plus character, +, to add, or a minus sign, -, to take away) designate the following: . u—Adds or removes user (owner) read, write, or execute permission . g—Adds or removes group read, write, or execute permission . o—Adds or removes read, write, or execute permission for others not in a file’s group . a—Adds or removes read, write, or execute permission for all users . r—Adds or removes read permission . w—Adds or removes write permission . x—Adds or removes execution permission For example, if you create a file, such as a readme.txt, the file will have default permissions (set by the umask setting in /etc/bashrc) of -rw-rw-r--

1 andrew

andrew

12 Jan 2 16:48 readme.txt

As you can see, you and members of your group can read and write the file. Anyone else can only read the file (and only if it is outside your home directory, which will have read, write, and execute permission set only for you, the owner). You can remove all write permission for anyone by using chmod, the minus sign, and aw like so: $ chmod -aw readme.txt $ ls -l readme.txt -r--r--r-1 andrew

andrew


Now, no one can write to the file (except you, if the file is in your home or /tmp directory because of directory permissions). To restore read and write permission for only you as the owner, use the plus sign and the u and rw options like so: $ chmod u+rw readme.txt $ ls -l readme.txt -rw------1 andrew

andrew


You can also use the octal form of the chmod command, for example, to modify a file’s permissions so that only you, the owner, can read and write a file. Use the chmod command and a file permission of 600, like this: $ chmod 600 readme.txt

If you take away execution permission for a directory, files might be hidden inside and may not be listed or accessed by anyone else (except the root operator, of course, who has access to any file on your system). By using various combinations of permission settings, you can quickly and easily set up a more secure environment, even as a normal user in your home directory.


103

Understanding Set User ID and Set Group ID Permissions Another type of permission is “set user ID”, known as suid, and “set group ID” (sgid) permissions. These settings, when used in a program, enable any user running that program to have program owner or group owner permissions for that program. These settings enable the program to be run effectively by anyone, without requiring that each user’s permissions be altered to include specific permissions for that program. One commonly used program with suid permissions is the passwd command: $ ls -l /usr/bin/passwd -rwsr-xr-x 1 root root 29104 Nov 6 19:16 /usr/bin/passwd

This setting allows normal users to execute the command (as root) to make changes to a root-only accessible file, /etc/passwd.

NOTE Other files that might have suid or guid permissions include at, rcp, rlogin, rsh, chage, chsh, ssh, crontab, sudo, sendmail, ping, mount, and several Unix-to-Unix Copy (UUCP) utilities. Many programs (such as games) might also have this type of permission to access a sound device.

Files or programs that have suid or guid permissions can sometimes present security holes because they bypass normal permissions. This problem is compounded if the permission extends to an executable binary (a command) with an inherent security flaw because it could lead to any system user or intruder gaining root access. In past exploits, this typically happened when a user fed a vulnerable command with unexpected input (such as a long pathname or option); the command would fail, and the user would be presented a root prompt. Although Linux developers are constantly on the lookout for poor programming practices, new exploits are found all the time, and can crop up unexpectedly, especially in newer software packages that haven’t had the benefit of peer developer review. Savvy Linux system administrators keep the number of suid or guid files present on a system to a minimum. The find command can be used to display all such files on your system: # find / -type f -perm +6000 -exec ls -l {} \;

4

You also can assign similar permission with the chfn command. This command allows users to update or change finger information in /etc/passwd. You accomplish this permission modification by using a leading 4 (or the mnemonic s) in front of the three octal values.

104

CHAPTER 4


NOTE The find command is quite helpful and can be used for many purposes, such as before or during backup operations. See the section “Using Backup Software” in Chapter 13, “Backing Up.”

Note that the programs do not necessarily have to be removed from your system. If your users really do not need to use the program, you can remove the program’s execute permission for anyone. You have to decide, as the root operator, whether your users are allowed to, for example, mount and unmount CD-ROMs or other media on your system. Although Linux-based operating systems can be set up to accommodate ease of use and convenience, allowing programs such as mount to be suid might not be the best security policy. Other candidates for suid permission change could include the chsh, at, or chage commands.

Working as Root The root, or super-user account, is a special account and user on Unix and Linux systems. Super-user permissions are required in part because of the restrictive file permissions assigned to important system configuration files. You must have root permission to edit these files or to access or modify certain devices (such as hard drives). When logged in as root, you have total control over your system, which can be dangerous. When you work in root, you can destroy a running system with a simple invocation of the rm command like this: # rm -fr /

This command line not only deletes files and directories, but also could wipe out file systems on other partitions and even remote computers. This alone is reason enough to take precautions when using root access. The only time you should run Linux as the super-user is when you are configuring the file system, for example, or to repair or maintain the system. Logging in and using Linux as the root operator isn’t a good idea because it defeats the entire concept of file permissions.

NOTE The next couple of paragraphs assume that you have enabled the root account, as described at the start of this chapter.

Knowing how to run commands as root without logging in as root can help avoid serious missteps when configuring your system. Linux comes with a command named su that enables you to run one or more commands as root and then quickly returns you to normal user status. For example, if you would like to edit your system’s file system table (a

Working as Root

105

simple text file that describes local or remote storage devices, their type, and location), you can use the su command like this: $ su -c “nano -w /etc/fstab” Password:

After you press Enter, you are prompted for a password that gives you access to root. This extra step can also help you “think before you leap” into the command. Enter the root password, and you are then editing /etc/fstab, using the nano editor with line wrapping disabled.

CAUTION

You can use sudo in the same way to allow you to execute one-off commands. The above example would look like this, using sudo: $ sudo nano -w /etc/fstab

Creating Users When a Linux system administrator creates a user, an entry in /etc/passwd for the user is created. The system also creates a directory, labeled with the user’s username, in the /home directory. For example, if you create a user named bernice, the user’s home directory is /home/bernice.

NOTE In this chapter, you learn how to manage users from the command line. See Chapter 10, “Managing Users,” for more information on user administration with Ubuntu using graphical administration utilities, such as the graphical users-admin client.

Use the useradd command, along with a user’s name, to quickly create a user: $ sudo useradd andrew

After creating the user, you must also create the user’s initial password with the passwd command: $ sudo passwd andrew

4

Before editing any important system or software service configuration file, make a backup copy. Then make sure to launch your text editor with line wrapping disabled. If you edit a configuration file without disabling line wrapping, you could insert spurious carriage returns and line feeds into its contents, causing the configured service to fail when restarting. By convention, nearly all configuration files are formatted for 80-character text width, but this is not always the case. By default, the vi and emacs editors don’t use line wrap.

106

CHAPTER 4


Changing password for user andrew. New password: Retype new password: passwd: all authentication tokens updated successfully.

Enter the new password twice. If you do not create an initial password for a new user, the user cannot log in. You can view useradd’s default new user settings by using the command and its -D option, like this: $ useradd -D GROUP=100 HOME=/home INACTIVE=-1 EXPIRE= SHELL=/bin/bash SKEL=/etc/skel

These options display the default group ID, home directory, account and password policy (active forever with no password expiration), the default shell, and the directory containing defaults for the shell. The useradd command has many different command-line options. The command can be used to set policies and dates for the new user’s password, assign a login shell, assign group membership, and other aspects of a user’s account.

Deleting Users Use the userdel command to delete users from your system. This command removes a user’s entry in the system’s /etc/passwd file. You should also use the command’s -r option to remove all the user’s files and directories (such as the user’s mail spool file under /var/spool/mail): $ sudo userdel -r andrew

If you do not use the -r option, you have to manually delete the user’s directory under /home, along with the user’s /var/spool/mail queue.

Shutting Down the System Use the shutdown command to shut down your system. The shutdown command has a number of different command-line options (such as shutting down at a predetermined time), but the fastest way to cleanly shut down Linux is to use the -h or halt option, followed by the word now or the numeral zero (0), like this: $ sudo shutdown -h now

or

Working as Root

107

$ sudo shutdown -h 0

To incorporate a timed shutdown and a pertinent message to all active users, use shutdown’s time and message options, like so: $ sudo shutdown -h 18:30 “System is going down for maintenance this evening”

You should shut down Ubuntu for only a few very specific reasons: . You are not using the computer and want to conserve electrical power. . You need to perform system maintenance that requires any or all system services to be stopped. . You want to replace integral hardware.

TIP Do not shut down your computer if you suspect that one or more intruders has infiltrated your system; instead, disconnect the machine from any or all networks and make a backup copy of your hard drives. You might want to also keep the machine running to examine the contents of memory and to examine system logs.

Rebooting the System You should also use the shutdown command to reboot your system. The fastest way to cleanly reboot Linux is to use the -r option, and the word now or the numeral zero (0): $ sudo shutdown -r now

or $ sudo shutdown -r 0

Both rebooting and shutting down can have dire consequences if performed at the wrong time (such as during backups or critical file transfers, which arouses the ire of your system’s users). However, Linux-based operating systems are designed to properly stop active system services in an orderly fashion. Other commands you can use to shut down and reboot Linux are the halt and reboot commands, but the shutdown command is more flexible.

4

This example shuts down your system and provides a warning to all active users 15 minutes before the shutdown (or reboot). Shutting down a running server can be considered drastic, especially if there are active users or exchanges of important data occurring (such as a backup in progress). One good approach is to warn users ahead of time. This can be done by editing the system Message of the Day (MOTD) motd file, which displays a message to users after login. To create your custom MOTD, use a text editor and change the contents of /etc/motd. You can also make downtimes part of a regular schedule, perhaps to coincide with security audits, software updates, or hardware maintenance.

108

CHAPTER 4


Reading Documentation Although you learn the basics of using Ubuntu in this book, you need time and practice to master and troubleshoot more complex aspects of the Linux operating system and your distribution. As with any operating system, you can expect to encounter some problems or perplexing questions as you continue to work with Linux. The first place to turn for help with these issues is the documentation included with your system; if you cannot find the information you need there, check Ubuntu’s website. Linux, like Unix, is a self-documenting system, with man pages accessible through the man command. Linux offers many other helpful commands for accessing its documentation. You can use the apropos command—for example, with a keyword such as partition—to find commands related to partitioning, like this: $ apropos partition diskdumpfmt fdisk GNU Parted [parted] mpartition MPI_Cart_sub partprobe pvcreate sfdisk

(8) (8) (8) (1) (3)

-

format a dump device or a partition Partition table manipulator for Linux a partition manipulation program partition an MSDOS hard disk Partitions a communicator into subgroups which form lower-dimensional cartesian subgrids (8) - inform the OS of partition table changes (8) - initialize a disk or partition for use by LVM (8) - Partition table manipulator for Linux

To find a command and its documentation, you can use the whereis command. For example, if you are looking for the fdisk command, you can do this: $ whereis fdisk fdisk: /sbin/fdisk /usr/share/man/man8/fdisk.8.gz

Using Man Pages To learn more about a command or program, use the man command, followed by the name of the command. Man pages for Linux and X Window commands are within the /usr/share/man, /usr/local/share/man, and /usr/X11R6/man directories; so, for example, to read the rm command’s man page, use the man command like this: $ man rm

After you press Enter, the less command (a Linux command known as a pager) displays the man page. The less command is a text browser you can use to scroll forward and backward (even sideways) through the document to learn more about the command. Type the letter h to get help, use the forward slash to enter a search string, or press q to quit.

Reading Documentation

109

NOTE Although nearly all the hundreds of GNU commands included with Linux each have a man page, you must use the info command to read detailed information about using a GNU command. For example, to learn even more about bash (which has a rather extensive manual page), use the info command like this: $ info bash

Press the n and p keys to navigate through the document, or scroll down to a menu item on the screen and press Enter to read about a specific feature. Press q to quit reading.

Related Ubuntu and Linux Commands

4

The following programs and built-in shell commands are commonly used when working at the command line. These commands are organized by category to help you understand the command’s purpose. If you need to find full information for using the command, you can find that information under the command’s man page. . Managing users and groups—chage, chfn, chsh, edquota, gpasswd, groupadd, groupdel, groupmod, groups, mkpasswd, newgrp, newusers, passwd, umask, useradd, userdel, usermod . Managing files and file systems—cat, cd, chattr, chmod, chown, compress, cp, dd, fdisk, find, gzip, ln, mkdir, mksfs, mount, mv, rm, rmdir, rpm, sort, swapon, swapoff, tar, touch, umount, uncompress, uniq, unzip, zip . Managing running programs—bg, fg, kill, killall, nice, ps, pstree, renice, top, watch . Getting information—apropos, cal, cat, cmp, date, diff, df, dir, dmesg, du, env, file, free, grep, head, info, last, less, locate, ls, lsattr, man, more, pinfo, ps, pwd, stat, strings, tac, tail, top, uname, uptime, vdir, vmstat, w, wc, whatis, whereis, which, who, whoami . Console text editors—ed, jed, joe, mcedit, nano, red, sed, vim . Console Internet and network commands—bing, elm, ftp, host, hostname, ifconfig, links, lynx, mail, mutt, ncftp, netconfig, netstat, pine, ping, pump, rdate, route, scp, sftp, ssh, tcpdump, traceroute, whois, wire-test

110

CHAPTER 4


Reference . http://www.winntmag.com/Articles/Index.cfm?ArticleID=7420—An article by a Windows NT user who, when experimenting with Linux, blithely confesses to rebooting the system after not knowing how to read a text file at the Linux console. . http://standards.ieee.org/regauth/posix/—IEEE’s POSIX information page. . http://www.itworld.com/Comp/2362/lw-01-government/#sidebar—Discussion of Linux and POSIX compliance. . http://www.pathname.com/fhs/—Home page for the Linux FHS, Linux Filesystem Hierarchy Standard. . http://www.tldp.org/—Browse the HOWTO section to find and read The Linux Keyboard and Console HOWTO—Andries Brouwer’s somewhat dated but eminently useful guide to using the Linux keyboard and console. . http://www.gnu.org/software/emacs/emacs.html—Home page for the FSF’s GNU emacs editing environment; you can find additional documentation and links to the source code for the latest version here. . http://www.vim.org/—Home page for the vim (vi clone) editor included with Linux distributions. Check here for updates, bug fixes, and news about this editor. . http://www.courtesan.com/sudo/—Home page for the sudo command. Check here for the latest updates, security features, and bug fixes.

PART II Desktop Ubuntu IN THIS PART CHAPTER 5

On the Internet

CHAPTER 6


CHAPTER 7


CHAPTER 8


CHAPTER 9

Games


CHAPTER

5

On the Internet

IN THIS CHAPTER . Getting Started with Firefox . Choosing an Email Client . RSS Readers . Instant Messaging with Pidgin . Internet Relay Chat

In the modern world, the Internet is everywhere. From cell phones to offices, from games consoles to iPods, we are surrounded by multiple access routes to online information and communication. Ubuntu is no outsider when it comes to accessing information through the Internet and comes equipped with web browsers, email clients and other tools that you can use to connect to other people across the globe. In this chapter we’ll take a look at some of the popular Internet applications that are available with Ubuntu. You’ll find out about Firefox, and its KDE alternative, Konqueror. We’ll also investigate some of the email clients that you can install whilst using Ubuntu. Other topics include RSS feed readers, Instant Messaging (through IRC and other networks) and reading newsgroups. Finally we’ll take a quick look at Ekiga, which is a videoconferencing program for Ubuntu.

A Brief Introduction to the Internet The Internet itself was first brought to life by the U.S. Department of Defense in 1969. It was called ARPANet after the Department of Defense’s Advanced Research Projects Agency. Designed to build a network that would withstand major catastrophe (this was the peak of the Cold War), it soon grew to encompass more and more networks to build the Internet. Then, in 1991, Tim Berners-Lee of CERN developed the idea of the World Wide Web, including Hypertext Transfer Protocol (HTTP) and Hypertext Markup Language (HTML). This gave us what we now know to be the Internet.

. Usenet Network Newsgroups . The Pan News Client Newsreader . Videoconferencing with Ekiga . Reference

114

CHAPTER 5

On the Internet

Getting Started with Firefox One of the most popular web browsers, and in fact the default web browser in Ubuntu, is Mozilla Firefox (see Figure 5.1). Built on a solid code base that is derived from the Mozilla Suite, Firefox offers an alternative to surfing the Internet using Internet Explorer. There have been more than 265 million downloads of Firefox since its release in late 2004, and it has grabbed significant market share from Internet Explorer.

FIGURE 5.1 Mozilla Firefox—rediscover the Web. Firefox enables you to add on numerous upgrades, further enhancing your experience.

In Ubuntu you can find Firefox under the Applications, Internet menu at the top of your screen. An even simpler way to start Firefox is to click the small Firefox icon next to the System menu. Either way, Firefox opens. Beyond the basic program is a wealth of plug-ins and extensions that can increase the capabilities of Firefox beyond simple web browsing. Plug-ins such as Shockwave Flash and Java are available instantly, as are multimedia codecs for viewing video content, whereas extensions provide useful additions to the browsing experience. For example, ForecastFox is an extension that gives you your local weather conditions, and Bandwidth Tester is a tool that calculates your current bandwidth. As Firefox grows, there will be more and more extensions and plug-ins that you can use to enhance your browsing pleasure.

Choosing an Email Client

115

Finding and obtaining these plugins and extensions is made very easy as Mozilla developers have helpfully created a site dedicated to helping you get more from Firefox. Particular favorites are the Adblock Plus and the StumbleUpon plugins. Adblock Plus allows you to nuke all those annoying banners and animations that take up so much bandwidth while you are browsing. StumbleUpon is a neat plugin that takes you to web pages based on your preferences. Be warned, though, that StumbleUpon can be quite addictive and you will end up wasting away many hours clicking the stumble button!

Flash You can easily enable Flash in your browser by installing the flashplugin-nonfree package either by using synaptic or by using apt-get. Either way, Ubuntu will download this package, which will in turn retrieve the official package from Adobe and then install it on your system. A browser restart is required before you try to access any Flash-enabled content.

Konqueror KDE users have the option to use Konqueror, which is the default browser for KDE (see Figure 5.2). As well as handling file system navigation, Konqueror can also be used to surf the web. It, too, is based on the Gecko rendering engine as found in Firefox. It was decided that the newer Arora browser (version 0.10 and based on webkit), while good, wasn't as mature as would be preferred for use by default. However, you can download it from the repositories.

Choosing an Email Client Back in the days of Unix, there were various text-based email clients such as elm and pine (Pine Is Not Elm). Although they looked basic, they allowed the average user to interact with his email, both for composing and reading correspondence. With the advent of mainstream computing and the realization that people needed friendly GUI interfaces to be productive came a plethora of email clients, with some of them being cross-platform and compatible among Linux, Windows, and Mac OS X, not to mention Unix.

5

Another plugin that we make a lot of use of is Google BrowserSync. If, like us, you work across multiple computers then you will no doubt have had to re-create bookmarks at every different computer and try to keep them the same. Google makes this whole process much easier by allowing you to synchronize not only your bookmarks, but also your cookies, browser history and finally any saved passwords across multiple browsers. Bear in mind that you can choose what you want to synchronize, making it easy just to replicate your bookmarks.

116

CHAPTER 5

On the Internet

FIGURE 5.2 Konqueror, the standard KDE web browser.

Evolution Evolution is the standard email client that comes with Ubuntu, and to call it an email client would be to sincerely underestimate its usefulness as an application. Not only does it handle email, but it can also look after contacts and calendaring, as well as managing your tasks (see Figure 5.3). The next section demonstrates how to configure Evolution to handle email.

FIGURE 5.3 With Evolution you can handle all your email and contacts, as well as make appointments and track tasks.


117

You need to have the following information to successfully configure Evolution: . Your email address . Your incoming email server name and type (that is, pop.email.com, POP, and IMAP) . Your username and password for the incoming server . Your outgoing email server name (that is, smtp.email.com) After you have all the information, you can start Evolution. The first screen you are presented with is the Account Setup Assistance screen, so click Next to get to the Identity screen (see Figure 5.4).

5 FIGURE 5.4 You can launch and configure Evolution with just a few simple commands. The Identity screen, the first of several screens, asks you to enter your information. Click Forward to proceed.

The next screen permits you to configure Evolution to use your Mail Transfer Agent. You can choose POP, IMAP, the local spools found in /var/mail in either mbox or maildir format, a local MTA, or None if you simply want to use the other features of Evolution. As shown in Figure 5.5, you can also set your password.

118

CHAPTER 5

On the Internet

FIGURE 5.5 The Receiving Email screen requires information from your ISP or system administrator. You must also choose between SMTP or Sendmail for sending your mail, so enter the relevant details as required. If you have chosen an IMAP-based email account then you’ll be asked some more questions to govern how often Evolution checks for email. Finally, you will see the opening Evolution window, shown in Figure 5.6. Each icon in the left pane of the main Evolution window opens a different window when selected. Each view has options that can be configured to suit your needs; you’ll find access to the preferences dialog box (shown in Figure 5.7) which can be found under the Edit menu.

Mozilla Thunderbird Mozilla Thunderbird (see Figure 5.8) is the sister program to Firefox. Whereas Firefox is designed to browse the web, Thunderbird’s specialty is communication. It can handle email, network news (see later in this chapter), and RSS feeds. Thunderbird is not installed by default with Ubuntu, so you will have to use either aptget or synaptic to install it. As with Firefox, there are many plug-ins and extensions to enhance your email and newsreading.


119

FIGURE 5.7 The calendar application Tools screen is where the information can be shared with others. Here, the times and dates can be configured.

5

FIGURE 5.6 The standard Evolution display. On the left you can see buttons to choose Mail, Contacts, Calendars, Memos, and Tasks windows.

120

CHAPTER 5

On the Internet

FIGURE 5.8 The natural companion to Firefox, Mozilla’s lightweight email client, Thunderbird, can be found in use all over the world.

KMail If you are using the KDE Desktop Environment rather than the Ubuntu default GNOME desktop, you will also have KMail installed. As with Balsa, it will not take users of Outlook Express or Mozilla Mail very long to get used to the KMail interface. Some useful features found in KMail are the choice of mbox or maildir formats, improved filter creation, the capability to sort mail into threads, and the capability to apply filters at the MTA. Figure 5.9 shows the KMail email program. KMail offers IMAP access, extensive filtering, mbox and maildir formats, and the capability to easily integrate MTAs such as Procmail, Spamassassin, or custom processing scripts.

Other Mail Clients The mail clients that we’ve covered are only a few of those available. Claws Mail is very popular because it offers spell-checking while typing and is well suited for use in large network environments in which network overhead and RAM usage are important considerations. You can see a screenshot of Claws mail in Figure 5.10.

RSS Readers RSS is one of the protocols of Web 2.0, the next generation of Internet content. Although RSS has been in use for a couple of years now, it has only recently started to really take off, thanks to adoption across a large number of websites and portals.

RSS Readers

121

FIGURE 5.10 Claws Mail gives you a very resource-light, yet very powerful and fast mail client. The key advantage of RSS is that you can quickly read news from your specific choice of websites at a time that suits you. Some services offer just the articles’ headlines, whereas others offer full articles for you to view. RSS feeds can be accessed in various ways, even through your web browser!

5

FIGURE 5.9 The KMail email client, part of the KDE Desktop Environment.

122

CHAPTER 5

On the Internet

Firefox Firefox implements RSS feeds as what it calls Live Bookmarks (shown in Figure 5.11), which are essentially bookmarks with sub-bookmarks, each linking to a new page from your chosen website. I like to have several news sites grouped together under a folder on my toolbar called News, allowing me to quickly browse through my collection of sites and pick out articles that really interest me.

FIGURE 5.11 Live Bookmarks for Firefox, making all your news fixes just a mouse click away.

Liferea Of course, not everyone wants to read RSS feeds with the browser. The main problem with reading RSS feeds with Firefox is that you get to see only the headline, rather than any actual text. This is where a dedicated RSS reader comes in handy, and Liferea (see Figure 5.12) is one of the best. It is not installed by default, so you have to retrieve it by going to Applications, Add/Remove. After it is installed, you can find it under the Applications, Internet menu labeled simply Liferea. By default, Liferea offers a number of RSS feeds, including Planet Debian, Groklaw, and Slashdot. Adding a new feed is very straightforward. All you need to do is select New Subscription under the Feeds menu and paste the URL of the RSS feed into the box. Liferea then retrieves all the current items available through that field, and displays the feed name on the left side for you to select and start reading.

Instant Messaging with Pidgin

123

5 FIGURE 5.12 Read your daily news feeds with Liferea, a fantastic and easy-to-use RSS feed reader.

Instant Messaging with Pidgin Instant Messaging is one of the biggest ways for people to interact over the web. AOL was the primary force behind this, especially in America, but other networks and systems soon came onto the market providing users with a wealth of choice. No longer just a consumer tool, instant messaging is now a part of the corporate world, with many different companies deploying internal instant messaging software for collaboration. Pidgin was created as a multi-protocol instant messaging client enabling you to connect to several different networks that use differing protocols, such as AIM, MSN, Jabber and others. You can find Pidgin under Applications, Internet, listed as Pidgin Internet Messenger; it is shown in Figure 5.13.

124

CHAPTER 5

On the Internet

FIGURE 5.13 Pidgin is the Swiss army knife of instant messaging applications; it can work across many different IM networks. Getting started with Pidgin is simple; when you start Pidgin you are asked to add a new account, as shown in Figure 5.14.

Internet Relay Chat As documented in RFC 2812 and RFC 2813, the IRC protocol is used for text conferencing. Like mail and news, IRC uses a client/server model. Although it is rare for an individual to establish an IRC server, it can be done. Most people use public IRC servers and access them with IRC clients. Ubuntu provides a number of graphical IRC clients, including X-Chat, licq, and Seamonkeychat, but there is no default chat client for Ubuntu. Ubuntu also provides the console clients epic and licq for those who eschew X. If you don’t already have a favorite, you should try them all.

CAUTION You should never use an IRC client while you are the root user. It is better to create a special user just for IRC because of potential security problems. To use X-Chat in this manner, you open a terminal window, use su to change to your IRC user, and start the xchat client.

X-Chat is a popular IRC client, and it is the client that is used in this chapter’s example. The HTML documents for X-Chat are available in /usr/share/docs/xchat. It is a good idea to read them before you begin because they include an introduction to and cover some of the basics of IRC. You need to download and install X-Chat to launch the X-Chat

Internet Relay Chat

125

5

FIGURE 5.14 Pidgin makes light work of setting up your instant messenger accounts. You select the network protocol for the account (that is, AIM, MSN, and so on) and fill out your screen name and password, finally clicking Save to create the account within Pidgin and automatically log in. If any of your contacts are online, then they will appear in the buddy list window as shown earlier in Figure 5.13. client, select the XChat IRC item from the Applications, Internet menu, or you can launch it from the command line, like this: $ xchat &

The X-Chat application enables you to assign yourself up to three nicknames. You can also specify your real name and your username. Because many people choose not to use their real names in IRC chat, you are free to enter any names you desire in any of the spaces provided. You can select multiple nicknames; you might be banned from an IRC channel under one name, and you could then rejoin using another. If this seems slightly juvenile to you, you are beginning to get an idea of the type of behavior on many IRC channels. When you open the main X-Chat screen, a list of IRC servers appears, as shown in Figure 5.15. After you choose a server by double-clicking it, you can view a list of channels available on that server by choosing Window, Channel List. The X-Chat Channel List window appears. In that window, you can choose to join channels featuring topics that interest you. To join a channel, you double-click it.

CHAPTER 5

126

On the Internet

FIGURE 5.15 The main X-Chat screen presents a list of available public servers from which to select.

The Wild Side of IRC Do not be surprised at the number of lewd topics and the use of crude language on public IRC servers. For a humorous look at the topic of IRC cursing, see http://www.irc. org/fun_docs/nocuss.html. This site also offers some tips for maintaining IRC etiquette, which is essential if you do not want to be the object of any of that profanity! Here are some of the most important IRC etiquette rules: . Do not use colored text, all-capitalized text, blinking text, or “bells” (beeps caused by sending ^G to a terminal). . Show respect for others. . Ignore people who act inappropriately.

After you select a channel, you can join in the conversation, which appears as onscreen text. The messages scroll down the screen as new messages appear. For an example, see Figure 5.16.

TIP You can establish your own IRC server even though Ubuntu does not provide one. Setting up a server is not a task for anyone who is not well versed in Linux or IRC.

Usenet Network Newsgroups

127

A popular server is IRCd, which you can obtain from ftp://ftp.irc.org/irc/server/. Before you download IRCd, you should look at the README file to determine what files you need to download and read the information at http://www.irchelp.org/irchelp/ircd/.

Usenet Network Newsgroups The concept of newsgroups revolutionized the way information was exchanged between people across a network. The Usenet network news system created a method for people to electronically communicate with large groups of people with similar interests. As you will see, many of the concepts of Usenet news are embodied in other forms of collaborative communication. Usenet newsgroups act as a form of public bulletin board system. Any user can subscribe to individual newsgroups and send (or post) messages (called articles) to the newsgroup so that all the other subscribers of the newsgroup can read them. Some newsgroups include an administrator, who must approve each message before it is posted. These are called moderated newsgroups. Other newsgroups are open, allowing any subscribed member to post a message. When an article is posted to the newsgroup, it is transferred to all the other hosts in the news network. Usenet newsgroups are divided into a hierarchy to make it easier to find individual newsgroups. The hierarchy levels are based on topics, such as computers, science, recreation,

5

FIGURE 5.16 Join in an online chatroom about your favorite distro, with X-Chat.

128

CHAPTER 5

On the Internet

and social issues. Each newsgroup is named as a subset of the higher-level topic. For example, the newsgroup comp relates to all computer topics. The newsgroup comp.laptops relates to laptop computer issues. Often the hierarchy goes several layers deep. For example, the newsgroup comp.databases.oracle.server relates to Oracle server database issues.

NOTE The format of newsgroup articles follows the strict guidelines defined in the Internet standards document Request for Comments (RFC) 1036. Each article must contain two distinct parts: header lines and a message body. The header lines identify information about when and by whom the article was posted. The body of the message should contain only standard ASCII text characters. No binary characters or files should be posted within news articles. To get around this restriction, binary files are converted to text data, through use of either the standard Unix uuencode program or the newer Multipurpose Internet Mail Extensions (MIME) protocol. The resulting text file is then posted to the newsgroup. Newsgroup readers can then decode the posted text file back into its original binary form.

A collection of articles posted in response to a common topic is called a thread. A thread can contain many articles as users post messages in response to other posted messages. Some newsreader programs allow the user to track articles based on the threads to which they belong. This helps simplify the organization of articles in the newsgroup.

TIP The free news server news.gmane.org makes the Red Hat and Ubuntu mail lists available via newsgroups. The beta list is available as gmane.linux.redhat.rhl.beta. It is a handy way to read threaded discussions and easier than using the Ubuntu mail list archives.

The protocol used to transfer newsgroup articles from one host to another is Network News Transfer Protocol (NNTP), defined in RFC 975. (You can search RFCs at ftp://metalab.unc.edu/pub/docs/rfc/; look at the file rfc-index.txt.) NNTP was designed as a simple client/server protocol that enables two hosts to exchange newsgroup articles in an efficient manner.

The Pan News Client Newsreader Whether or not your Ubuntu server is set up as a news server, you can use a newsreader program to read newsgroup articles. The newsreader programs require just a connection to a news server. It does not matter whether the news server is on the same machine or is a remote news server on the other side of the world.

The Pan News Client Newsreader

129

Several programs are available for Unix systems to connect to news servers to read and post articles in newsgroups. Here we’ll discuss the Pan news client. Pan is a graphical newsreader client that works with GNOME and is the default newsreader for Ubuntu. If you have the GNOME libraries installed (and they usually are installed by default), you can also use Pan with the K Desktop Environment (KDE). Pan has the capability to download and display all the newsgroups and display posted news articles. You can launch it by using the GNOME or KDE desktop panel or from the command line of an X terminal window with the command pan &. Pan supports combining multipart messages and the yenc encoding/decoding protocol. Figure 5.17 shows a sample Pan display.

5

FIGURE 5.17 The Pan graphical newsreader is one of the nicest available for Linux, shown here displaying an image attached to a news article.

The first time you run Pan, a configuration wizard appears and prompts you for your news server name (also known as the NNTP name), connection port details, as well as optional username and password for that server. You are also able to set expiration options and prioritize a server over others. After the wizard is finished, you are prompted to download a list of the newsgroups the server provides; this might take a while. If you need to change

130

CHAPTER 5

On the Internet

the news server or add an additional server, you can access the Preferences item under the Edit menu to bring up the list of servers, which is shown in Figure 5.18. Then, you highlight the appropriate one and click Edit to change it or just click the New button to add a new news server.

FIGURE 5.18 The Pan news server configuration window.

Videoconferencing with Ekiga Ekiga is an Internet videoconferencing application that provides two-way voice and picture transmission over the Internet by using the H.323 protocol for IP telephony (also known as Voice over IP [VoIP]). It is an application similar to Microsoft NetMeeting and is provided with Ubuntu as the default videoconferencing client. Before you can take full advantage of the phone and videoconferencing capabilities of Ekiga, you must configure a full-duplex–capable sound card and video device (see Chapter 7, “Multimedia Applications”) as well as a camera. Ekiga is found in the Internet menu as Videoconferencing; you click on the icon to launch it. When you start the Ekiga application for the first time, a configuration wizard runs and you are greeted by the first of four configuration screens. You simply enter your name, email address, and location and select your connection type. The settings for your audio and video devices are automatically detected; you can view them by selecting the Preferences item from the Edit menu. Figure 5.19 shows Ekiga in action, ready to dial another user.

Videoconferencing with Ekiga

131

5

FIGURE 5.19 Ekiga is surprisingly simple to use. A video source is not necessary; a static picture can be used as well.

When you have Ekiga running, you must register (from within Ekiga) with the server at http://ekiga.net/ to enable conferencing; Ekiga does this automatically for you if you told it to do so during the initial configuration. You can find an informative FAQ at the Ekiga home page at http://www.Ekiga.org/ that you should read in full before using Ekiga. Also, an excellent article about VoIP is at http:/ /freshmeat.net/articles/view/430/.

NOTE If you frequently use VoIP applications such as Ekiga, you will tire of repetitively typing in long IP addresses to make connections. To avoid this hassle, you can use a “gatekeeper”—similar in purpose to a DNS server—to translate names into IP addresses. OpenH323 Gatekeeper is one such popular gatekeeper application. It is not provided with Ubuntu, but you can obtain it from http://www.gnugk.org/.

132

CHAPTER 5

On the Internet

Reference . http://www.novell.com/—The home of Ximian Evolution, the standard email client for Ubuntu. . http://www.mozilla.com/—The home page for Mozilla Firefox, Thunderbird, and the Mozilla Suite. . http://www.spreadfirefox.com/—The Firefox advocacy home page is useful for converting those Internet Explorer types. . http://www.konqueror.org/—The homepage for Konqueror. . http://www.claws-mail.org/— The homepage for Claws, the email client. . http://ekiga.net/—Sign up here for a free SIP account for use with Ekiga.

CHAPTER

6


IN THIS CHAPTER . Introducing OpenOffice.org . Office Suites for Ubuntu . Productivity Applications Written for Microsoft Windows . Reference

With the rapid growth of open source software, businesses have directly benefited from specific developments in office productivity suites. Many businesses already use OpenOffice.org and its commercial counterpart, StarOffice, and they are already enjoying the cost benefits of not having to pay license fees or support costs. Of course, more suites are available than just OpenOffice.org and in this chapter we will explore the options available to you as a user of Ubuntu.

NOTE It’s important to understand that OpenOffice.org is not 100% compatible with Microsoft Office. Why is this? Well, Microsoft is notoriously secretive about its proprietary file formats and the only way that OpenOffice.org could ensure compatibility would be to reverse-engineer each file format, an exercise akin to taking apart a telephone to see how it works. This reverse-engineering could be classed as illegal under U.S. law, which would make OpenOffice.org somewhat of a potential hot-potato if they chose this path. However, OpenOffice.org manages to maintain a very high standard of importing and exporting so you should not experience too many problems.

A productivity suite could be classed as containing two or more applications that could be used for creating documents, presentations, spreadsheets, and databases. Other applications could include email clients, calculators/formula editors, and even illustration packages. Commonly they are

134

CHAPTER 6


all tied together by a default look and feel, which makes sticking to one particular suite much easier. Because Ubuntu uses OpenOffice.org as its standard office suite, we will introduce you to Writer and Calc, the two most popular OpenOffice.org components. We will also take a brief look at some of the other Linux-based office suites that are available.

Working with OpenOffice.org For the majority of users of productivity suites, OpenOffice.org should fulfill most, if not all, of your requirements. However, the first hurdle you need to get over is not whether it can do what you require of it, but rather whether it can successfully import and export to proprietary Microsoft formats at a standard that is acceptable to your needs. In the main, OpenOffice.org should import and export with minimal hassle, perhaps getting a bit stuck with some of the more esoteric Microsoft Office formatting. Given that most users do not go much beyond tabs, columns, and tables, this level of compatibility should suffice. However, you are strongly advised to round up a selection of documents and spreadsheets that could potentially fall foul of the import/export filter and test them thoroughly (of course, keeping a backup of the originals!). There is nothing worse than for a system administrator who has deployed a new productivity suite than to suddenly get users complaining that they cannot read their files. This would quickly destroy any benefits felt from the other useful functions within OpenOffice.org, and could even spell the return of proprietary formats and expensive office suites. Many users do not mind switching to OpenOffice.org, largely because the user interface closely resembles that of similar Microsoft applications. This helps to settle users into their environment and should dispel any fears they have over switching. Such similarity makes the transition to OpenOffice.org a lot easier. Of course, just looking similar to Microsoft applications is not the only direct benefit. OpenOffice.org supports a huge array of file formats, and is capable of exporting to nearly 70 different types of documents. Such a wide variety of file formats means that you should be able to successfully use OpenOffice.org in nearly any environment.

Introducing OpenOffice.org OpenOffice.org contains a number of productivity applications for use in creating text documents, preparing spreadsheets, organizing presentations, managing projects, and more. The following components of the OpenOffice.org package are included with Ubuntu: . Writer—This word processing program enables you to compose, format, and organize text documents. If you are accustomed to using Microsoft Word, the functionality of OpenOffice.org Writer will be familiar to you. You will learn how to get up and running with Writer later on in this chapter. . Calc—This spreadsheet program enables you to manipulate numbers in a spreadsheet format. Support for all but the most esoteric Microsoft Excel functions means

Introducing OpenOffice.org

135

that trading spreadsheets with Excel users should be successful. Calc offers some limited compatibility with Excel macros, but those macros generally have to be rewritten. We walk through setting up a basic spreadsheet with some formulas as well as showing you how to build a basic Data Pilot later on in this chapter. . Impress—This presentation program is similar to Microsoft PowerPoint and enables you to create slide show presentations that include graphs, diagrams, and other graphics. Impress also works well with PowerPoint files.

NOTE The following five applications are not included by default with Ubuntu. You will need to use synaptic to retrieve them if required.

. Math—This math formula editor enables you to write mathematical formulas with a number of math fonts and symbols for inclusion in a word processing document. Such symbols are highly specialized and not easily included in the basic functionality of a word processor. This is of interest primarily to math and science writers, but Math can be useful to anyone who needs to include a complex formula in text.

. Draw—This graphics application allows you to create images for inclusion in the documents produced with OpenOffice.org. It saves files only in OpenOffice.org format, but it can import most common image formats. . Dia—This technical drawing editor from the GNOME Office suite enables you to create measured drawings, such as those used by architects and engineers. Its functionality is similar to that of Microsoft Visio. . Planner—You can use this project management application for project planning, scheduling, and tracking; this application is similar to, but not compatible with, Microsoft Project. It is found in the Office menu as the Project Planner item.

A Brief History of OpenOffice.org The OpenOffice.org office suite is based on a commercial suite called StarOffice. Originally developed by a German company, StarOffice was purchased by Sun Microsystems in the United States. One of the biggest complaints about the old StarOffice was that all the component applications were integrated under a StarOffice “desktop” that looked very much like a Microsoft Windows desktop, including a Start button and menus. This meant that to edit a simple document, unneeded applications had to be loaded, making the office suite slow to load, slow to run, and quite demanding on system resources.

6

. Base—This database was introduced with the OpenOffice.org 2.0 suite, which is provided with Ubuntu. It provides a fully functional database application.

136

CHAPTER 6


After the purchase of StarOffice, Sun Microsystems released a large part of the StarOffice code under the GNU Public License, and development began on what has become OpenOffice.org, which is freely available under the GPL. Sun continued development on StarOffice and released a commercial version as StarOffice 6.0. The significant differences between the free and commercial versions of the software are that StarOffice provides more fonts and even more import/export file filters than OpenOffice.org (these filters cannot be provided in the GPL version because of licensing restrictions) and StarOffice provides its own relational database, Software AG’s Adabas D database. The StarOffice counterpart to OpenOffice.org 2.4 is StarOffice 8.

Configuring OpenOffice.org The installation of OpenOffice.org is done on a systemwide basis, meaning that all users have access to it. However, individual users have to go into OpenOffice.org to configure it for their individual needs. This initial configuration happens transparently the first time you load any of the OpenOffice.org components, and might mean the application takes a little longer to load as a result. Be patient, and your desired application will appear.

TIP OpenOffice.org is constantly improving its productivity applications. You can check the OpenOffice.org website (http://www.openoffice.org/) for the latest version. The website provides a link to download the source or a pre-compiled version of the most current working installation files. A more current version might offer file format support that you need. Should you need a Windows-compatible version, you will also find it at the website.

Shown in Figure 6.1 is the Office menu, which is found under Applications. You can see the entries for Database (Base), Presentation (Impress), Spreadsheet (Calc), and Word Processor (Writer).

FIGURE 6.1 The OpenOffice.org suite provided by Ubuntu is simple to configure and use.


137

As is the case with many Linux applications, you may be somewhat overwhelmed by the sheer number of configuration options available to you in OpenOffice.org. Mercifully, a lot of thought has gone into organizing these options, which are available if you click the Tools menu and select Options. It does not matter which program you use to get to this dialog box; it appears the same if summoned from Writer, Impress, or Calc. It acts as a central configuration management tool for all OpenOffice.org applications. You can use it to set global options for all OpenOffice.org applications, or specific options for each individual component. For instance, in Figure 6.2, you can change the user details and information, and this is reflected across all OpenOffice.org applications.

6

FIGURE 6.2 You can set user details for all OpenOffice.org applications from this dialog.

TIP Two websites provide additional information on the functionality of OpenOffice.org: http://lingucomponent.openoffice.org/download_dictionary.html—This site provides instructions and files for installing spelling and hyphenation dictionaries, which are not included with OpenOffice.org. http://sourceforge.net/projects/ooextras/—This site provides templates, macros, and clip art, which are not provided with OpenOffice.org.

OpenOffice.org is a constant work in progress, but the current release is on par with the Sun version of StarOffice 8. You can browse to the OpenOffice.org website to get documentation and answers to frequently asked questions and to offer feedback.

Working with OpenOffice.org Writer Out of all the applications that make up OpenOffice.org, the one that you are most likely to use on a regular basis is Writer, the OpenOffice.org word processor. With a visual style very similar to Microsoft’s Word, Writer has a number of strengths over its commercial

138

CHAPTER 6


and vastly more expensive rival. In this section you will learn how to get started with Writer and make use of some of its powerful formatting and layout tools.

NOTE You may be interested to know that Writer was the primary word processor chosen to write and edit this book. Getting Started with Writer You can access Writer by going to the Applications, Office menu and selecting OpenOffice.org Word Processor. After a few seconds Writer opens up with a blank document and a blinking cursor awaiting your command. It can be tempting to just dive in and start typing your document, but it can be worthwhile to do some initial configuration before you start work. First of all, make sure that the options are set to your requirements. Click the Tools menu and select Options to bring up the Options dialog box, as seen in Figure 6.2. The initial screen allows you to personalize OpenOffice.org with your name, address, and contact details, but there are options to configure features that you might also want to alter. First of all, check that your default paths are correct by clicking the Paths option. You may prefer to alter the My Documents path, as shown in Figure 6.3, to something a little more specific than just the Documents directory.

FIGURE 6.3 Click the Edit button to choose your default documents directory. You might also want to change OpenOffice.org so that it saves in Microsoft Word format by default, should you so require. This can be done under the Load/Save General options shown in Figure 6.4, and it is a good idea if you value your work to change the Autorecovery settings so that it saves every couple of minutes. Also shown in Figure 6.4 are a set of options that are specific to Writer. From top to bottom, they are


139

FIGURE 6.4 Make sure that you are working with most appropriate file formats for you. . General—Specify options that affect the general use of Writer. . View—Specify what you want Writer to display. . Formatting Aids—Specify whether you want to see non-printing characters. . Grid—Create a grid that you can use to snap frames and images in place.

. Print—Specify exactly what you want Writer to output when you print your document. . Table—Set options for drawing tables within Writer. . Changes—Define how Writer handles changes to documents. . Compatibility—A set of rules that Writer uses to ensure close compatibility with earlier versions of Writer . AutoCaption—Create automatic captions for images, charts, and other objects A little bit of time working through these options can give you a highly personalized and extremely productive environment.

Working with Styles and Formatting One of the significant benefits of using Writer is the ability you have to easily apply formatting and styles to extremely complex documents. Depending on the types of documents you work with, you might want to consider creating your own styles beyond the 20 included by default. You can access styles through either the Style drop-down box in the toolbar or the Styles and Formatting window shown in Figure 6.5. If you cannot see the window, press the F11 key to display it.

6

. Basic Fonts—Select your default fonts for your document here.

140

CHAPTER 6


FIGURE 6.5 Writer’s quick and easy-to-use Styles and Formatting tool. The easiest way to work with the Styles and Formatting tool is to highlight the text you want to style and double-click the required style in the window. There are quite a few to choose from, but you might find them restrictive if you have more specialized needs. To start defining your own styles, press Ctrl+F11 to bring up the Style Catalogue, shown in Figure 6.6, where you add, modify and delete styles for pages, paragraphs, lists, characters and frames.

FIGURE 6.6 Writer’s powerful Style Catalogue gives you control over every aspect of styling.

Working with OpenOffice.org Calc The spreadsheet component of OpenOffice.org is named Calc, and is a very capable Excel alternative. Calc is used for storing numerical information that you need to analyze in some way. So, for instance, you could use it to help you budget month by month. It can take care of the


141

calculations for you, as long as you tell Calc what you want it to do. Anyone with experience in Excel will feel right at home with Calc. In this section, we will show you how to get started with Calc, including entering formulas and formatting. We will also take a look at some of the more advanced features of Calc, including the Data Pilot feature, which allows you to easily summarize information. Getting Started with Calc You can either click the shortcut icon that is located on the top GNOME panel, or select Spreadsheet from the Office menu under the Applications main menu. Whichever route you take, the result is the same and Calc starts to load. By default, Calc loads with a blank spreadsheet just waiting for you to enter information into it. In Figure 6.7, you can see that we have already started to enter some basic information into Calc.

6

FIGURE 6.7 Use Calc to store numerical and statistical information. Calc’s layout makes it easy to organize information into rows and columns. As you can see in the example, we have sales people listed in the left column, customers in the second column, Invoice Date in the third column, and finally Revenue in the fourth column. At the moment, there are no formulas entered to help you interpret the data. Clicking the E30 cell selects it and enables you to enter in a formula in the top formula bar. If you enter in the equal sign, Calc knows that you are entering a formula and works accordingly. In this example, we want to know the total revenue brought in up to now, so the formula to enter is =sum(E4:E29), followed by Return. Calc automatically enters the result into cell

142

CHAPTER 6


E43 for you to see. Now you want to see what the average order value was. To do this, you have to obtain the number orders made. For this you can use the counta function to count the number of entries in a given list. This is usually used when you need to find out how many entries there are in a text list. So, in cell B30, enter =counta(B4:B29) and press Enter. Calc now counts the number of entries in the range and returns the total in B43. All that remains for you to do is divide the total revenue by the number of orders to find the average order value. So, in cell E31, enter the formula =E30/B30 to get the average order value.

TIP Calc offers some nifty little features that you can use quickly if you need to. The handiest one in our opinion is the capability to select multiple cells and see straight away the total and average of the range. You will find these figures in the bottom-right status bar. This has saved us numerous times when we have needed to get this information quickly! Formatting Your Spreadsheets Getting back to our example, it looks a little basic at the moment as there is no formatting involved. For instance, what’s the billing currency? You can also see that some of the cells have text that does not fit, which is highlighted by a small right arrow in the cell. We should also add some labels and titles to our spreadsheet to make it a bit more visually appealing. To start off, all the revenue figures can be changed into currency figures. To do this, select all the cells containing revenue information and click on the small coin icon shown in Figure 6.8. This immediately formats the cells so that they display the dollar sign and also puts in a thousands separator to make the numbers easier to read.

FIGURE 6.8 Make numbers more meaningful with the currency and percentage icons. Now you need to space all the cells so that you can read all the information. A quick and easy way to do this is to click the area immediately to the left of column A and immediately above row 1 to select the entire spreadsheet. Now all you have to do is double-click the dividing lines and each column resizes according to its longest entry. Next you can add a little color to the worksheet by using the paint can icon in the toolbar. Select the range B2 to E2 with the mouse cursor and click the background color icon to bring up the color window shown in Figure 6.9. Now select the color you want to use and Calc fills the cells with that color. You can also change the font color by using the icon immediately to the right in the same way. Finally you need a couple more finishing touches. The first one is to enlarge the font for the column headers. Select the range B2 to E2 again and click the font size in the toolbar


143

FIGURE 6.9 Add a touch of color to an otherwise dull spreadsheet with the fill background icon. to change it to something a little larger. You might also want to use the bold and italic options to emphasize the headers and also the totals some more. If you have followed the steps as described, you should end up with a spreadsheet similar to the one in Figure 6.10.

6

FIGURE 6.10 The finished spreadsheet, looking a lot better than before! Summarizing Data with Calc Calc includes a powerful tool that lets you summarize large groups of data to help you when you need to carry out any analysis. This tool is called a data pilot, and you can use it to quickly summarize data that might normally take a long time if you did the calculations manually. Using the sample spreadsheet from earlier, we will take you through how

144

CHAPTER 6


to build a simple data pilot, showing you how to analyze and manipulate long lists of data. The previous section featured a spreadsheet that showed sales people, customers, date of invoice, and revenue. At the foot of the spreadsheet were a couple of formulas that enabled you to quickly see the total revenue earned and the average order value. Now you want to find out how much sales people have earned individually. Of course you could add this up manually with a calculator, but that would defeat the point of using Calc. So, you need to create a data pilot to summarize the information. First, you need to select all the cells from B2 to E42 as they contain the data you want to analyze. After these are selected, click on the Data menu and select Data Pilot, Start to open the Data Pilot Wizard. The first screen is shown in Figure 6.11 and is defaulted to Current Selection. Make sure that you choose this one to use the data in the selected range and click OK to continue.

FIGURE 6.11 Use either the current selection or an external data source to provide the data pilot with information. The next screen enables you to lay out your data pilot as you want it. In this example you want to have Sales Person in the left column marked Row Fields, so click and drag the Sales Person option from the list on the right and drop it onto the Row Fields area. You’re also interested in the average unit rate for each sales person, so drag Unit Rate into the Data Fields section and double-click it. In the window that comes up, select Average from the list and click the OK button. Finally, drag Revenue to the Data Field area so you can see how much revenue each sales person brought in. You should end up with something like Figure 6.12; you are almost ready to display your data pilot. The final piece in the puzzle is to tell Calc where you want it to place the finished data pilot. To do this, click the More button to drop down some extra options and select the box Send Results To to choose a new sheet. When you click OK now, Calc builds the data pilot and displays it on a new sheet in your workbook. The new data pilot can be seen in Figure 6.13.

Office Suites for Ubuntu As we have mentioned earlier, OpenOffice.org is the default application suite for Ubuntu. However, with all things open source, there are plenty of alternatives should you find that OpenOffice.org does not meet your specific requirements. These include the popular

Office Suites for Ubuntu

145

FIGURE 6.12 Lay your data pilot out as you want it.

6 FIGURE 6.13 Summarize large volumes of numerical data with ease, using Calc’s Data Pilot function. Gnome Office and also KOffice, the default KDE productivity suite. You are more likely to hear more about OpenOffice.org, especially as more and more people wake up to the fact that it is compatible with Microsoft Office file formats. In fact, the state of Massachusetts recently elected to standardize on two file formats for use in government: the Adobe Acrobat PDF format and the OASIS OpenDocument format, both of which are supported natively in OpenOffice.org.

146

CHAPTER 6


NOTE The decision by the state of Massachusetts to standardize on PDF and OpenDocument has huge ramifications for the open source world. It is the first time that OpenDocument, an already-agreed open standard, has been specified in this way. What it means is that anyone who wishes to do business with the state government must use OpenDocument-based file formats, and not the proprietary formats in use by Microsoft. Unfortunately for Microsoft, it does not have support for OpenDocument in any of its applications, making them useless to anyone wishing to work with the state government. This is despite Microsoft being a founding member of OASIS, who developed and ratified the OpenDocument standard!

Working with Gnome Office The other office suite available for GNOME is Gnome Office, which is a collection of individual applications. Unlike OpenOffice.org, Gnome Office does not have a coherent suite of applications, meaning that you have to get used to using a word processor that offers no integration with a spreadsheet, and that cannot work directly with a presentation package. However, if you need only one or two components, it is worthwhile investigating Gnome Office.

The GTK Widget Set Open Source developers are always trying to make it easier for people to build applications and help in development. To this end, there are a number of widgets or toolkits that other developers can use to rapidly create and deploy GUI applications. These widgets control things such as drop-down lists, Save As dialogs, window buttons, and general look and feel. Unfortunately, whereas Windows and Apple developers have to worry about only one set of widgets each, Linux has a plethora of different widgets, including GTK+, QT, and Motif. What is worse is that these widgets are incompatible with one another, making it difficult to easily move a finished application from one widget set to another. GTK is an acronym for GIMP Tool Kit. The GIMP (The GNU Image Manipulation Program) is a graphics application very similar to Adobe Photoshop. By using the GTK-based jargon, we save ourselves several hundred words of typing and help move along our discussion of GNOME Office. You might also see similar references to QT and Motif, as well as other widget sets, in these chapters.

Here are some of the primary components of the Gnome Office suite that are available in Ubuntu: . AbiWord—This word processing program enables you to compose, format, and organize text documents and has some compatibility with the Microsoft Word file format. It uses plug-ins (programs that add functionality such as language translation) to enhance its functionality.


147

. Gnumeric—This spreadsheet program enables you to manipulate numbers in a spreadsheet format. Support for all but the most esoteric Microsoft Excel functions means that users should have little trouble trading spreadsheets with Excel users. . The GIMP—This graphics application allows you to create images for general use. It can import and export all common graphic file formats. The GIMP is analogous to Adobe’s Photoshop application and is described in Chapter 7, “Multimedia Applications.” . Evolution—Evolution is a mail client with an interface similar to Microsoft Outlook, providing email, scheduling, and calendaring. It is described in Chapter 5, “On the Internet.” The loose association of applications known as Gnome Office includes several additional applications that duplicate the functionality of applications already provided by Ubuntu. Those extra GNOME applications are not included in a default installation of Ubuntu to eliminate redundancy. They are all available from the Gnome Office website, at http:/ /www.gnome.org/gnome-office/. Both The GIMP and Evolution are available with Ubuntu by default. You have to use synaptic to retrieve the remaining components.

AbiWord is not installed by default in Ubuntu so you’ll need to install it either using apt-get or synaptic. The package is simply called abiword-gnome although you might want to install the meta-package gnome-office which will include the other Gnome Office applications. After you’ve installed Abiword, it becomes available in the Applications menu, under the Office submenu. Simply click the icon to launch the application. If you are familiar with Microsoft Works, the AbiWord interface will be familiar to you because its designers based the interface upon Works. You can use the Gnumeric spreadsheet application to perform financial calculations and to graph data, as shown in Figure 6.15. It can import comma- or tab-separated files, text, or files in the Gnumeric XML format, saving files only as XML or text. You need to install Gnumeric using either apt-get or synaptic in the same way as Abiword. If you have already installed the gnome-office package then Gnumeric will be available under Applications, Office as Gnumeric Spreadsheet. After you press Enter, the main Gnumeric window appears. You enter data in the spreadsheet by clicking a cell and then typing in the text box. To create a graph, you click and drag over the spreadsheet cells to highlight the desired data, and then you click the Graph Wizard icon in Gnumeric’s toolbar. Gnumeric’s graphing component launches and you are

6

Ubuntu provides the AbiWord editor, shown in Figure 6.14, as part of its Extras. AbiWord can import XML, Microsoft Word, RTF, UTF8, plain text, WordPerfect, KWord, and a few other formats. AbiWord is notable for its use of plug-ins, or integrated helper applications, that extend its capabilities. These plug-ins add language translation, HTML editing, a thesaurus, a Linux command shell, and an online dictionary, among other functions and features. If you just need a simple yet powerful word processing application, you should examine AbiWord.

148

CHAPTER 6


FIGURE 6.14 AbiWord is a word processing program for Ubuntu, GNOME, and X11. It handles some formats that OpenOffice.org cannot, but does not yet do well with Microsoft Word formats.

FIGURE 6.15 GNOME’s Gnumeric is a capable financial data editor—here working with the same spreadsheet used earlier. OpenOffice.org also provides a spreadsheet application, as does KOffice.


149

guided through a series of dialogs to create a graph. When you are finished, you can click and drag a blank area of your spreadsheet, and the graph appears. The Project Planner application is useful for tracking the progress of projects, much like its Windows counterpart, Microsoft Project. When the main window is displayed, you can start a new project or import an existing project. The application provides three views: Resources, Gantt Charts, and Tasks.

Working with KOffice The KDE office suite KOffice was developed to provide tight integration with the KDE desktop. Integration enables objects in one application to be inserted in other applications via drag-and-drop, and all the applications can communicate with each other, so a change in an object is instantly communicated to other applications. The application integration provided by KDE is a significant enhancement to productivity. (Some GNOME desktop applications share a similar communication facility with each other.) If you use the KDE desktop instead of the default GNOME desktop, you can enjoy the benefits of this integration, along with the Konqueror web and file browser.

KWord and other components of KOffice are still under development and lack all the polished features of OpenOffice.org and AbiWord. However, it does have the ability to work with the OpenDocument format found in OpenOffice.org, as well as limited compatibility with Microsoft file formats. You can access the KOffice components from the Office menu. KWord asks you to select a document for your session. The KWord client, shown in Figure 6.16, offers sophisticated editing capabilities, including desktop publishing. The KOffice KSpread client is a functional spreadsheet program that offers graphing capabilities. Like KWord, KSpread can be accessed from the Office menu. KDE includes other productivity clients in its collection of KOffice and related applications. These clients include an address book, time tracker, calculator, notepad, and scheduler. One popular client is Kontact, which provides daily, weekly, work week, and monthly views of tasks, to-do lists, and scheduled appointments with background alarms. A journal, or diary, function is also supported within it, and you can synchronize information with your Palm Pilot. You can launch this client from the Office menu.

6

The word processor for KOffice is KWord. KWord is a frames-based word processor, meaning that document pages can be formatted in framesets that hold text, graphics, and objects in enclosed areas. Framesets can be used to format text on a page that includes text and images within columns that the text needs to flow around, making KWord an excellent choice for creating documents other than standard business letters, such as newsletters and brochures.

150

CHAPTER 6


FIGURE 6.16 The KOffice KWord word processing component is a sophisticated frames-based WYSIWYG editor that is suitable for light desktop publishing, supporting several formats, including WordPerfect. A typical Kontact window is shown in Figure 6.17.

Productivity Applications Written for Microsoft Windows Microsoft Windows is fundamentally different from Linux, yet you can install and run some Microsoft Windows applications in Linux by using an application named Wine. Wine enables you to use Microsoft Windows and DOS programs on Unix-based systems. Wine includes a program loader that you can use to execute a Windows binary, along with a .dll library that implements Windows command calls, translating them to the equivalent Unix and X11 command calls. Because of frequent updates to the Wine code base, Wine is not included with Ubuntu. Download a current version of Wine from http://www. winehq.org/. To see whether your favorite application is supported by Wine, you can look at the Wine application database at http://appdb.winehq.org/appbrowse.php. As well, there are other solutions to enable use of Microsoft productivity applications, primarily CodeWeavers’ CrossOver Office. If you are after a painless way of running not only Microsoft Office, but also Apple iTunes and other software, you should really pay CodeWeavers a visit. CrossOver Office is one of the simplest programs you can use to get Windows-based programs to work. Check out www.codeweavers.com to download a trial

Productivity Applications Written for Microsoft Windows

151

FIGURE 6.17 KDE’s Kontact client supports editing of tasks and schedules that you can sync with your PDA. Shown here is the address book as well.

Relevant Ubuntu Commands The following commands give you access to productivity applications, tools, and processes in Ubuntu: . oowriter—OpenOffice.org’s Writer . oocalc—OpenOffice.org’s Calc . ooimpress—OpenOffice.org’s Impress . koshell—KDE’s KOffice office suite shell . kspread—KDE’s KSpread spreadsheet . gimp—The GIMP (GNU Image Manipulation Package) . gnumeric—A spreadsheet editor for GNOME . planner—A project management client for GNOME . abiword—A graphical word processor for GNOME

6

version of the latest software. It requires registration, but do not worry—the guys at CodeWeavers are great and will not misuse your details. The big plus is that you get a whole month to play around with the trial before you decide whether to buy it. Of course, you might get to the end of the 30 days and realize that Linux does what you want it to do and you don’t want to go back to Windows. Do not be afraid; take the plunge!

152

CHAPTER 6


Reference . http://www.openoffice.org—The home page for the OpenOffice.org office suite. . http://www.gnome.org/gnome-office/—The GNOME Office site. . http://www.koffice.org/—The home page for the KOffice suite. . http://www.codeweavers.com/—Website of the hugely popular CrossOver Office from CodeWeavers that allows you to run Windows programs under Linux.

CHAPTER

7


IN THIS CHAPTER . Sound and Music . Graphics Manipulation . Using Digital Cameras with Ubuntu . Burning CDs and DVDs in Ubuntu

The twenty-first century has become the century of the digital lifestyle, with millions of computer users around the world embracing new technologies, such as digital cameras, MP3 players, and other assorted multimedia gadgets. Whereas 10 years ago you might have had a collection of WAV files littering your Windows installation, nowadays you are more likely to have hundreds, if not thousands of MP3 files scattered across various computers. Along with video clips, animations, and other graphics, the demand for organizing and maintaining these vast libraries is driving development of applications. Popular proprietary applications such as iTunes and Google’s Picasa are coveted by Linux users, but open source applications are starting to appear that provide real alternatives, and for some the final reasons they need to move to Linux full time. This chapter provides an overview of some of the basic multimedia tools included with Ubuntu. You will see how to create your own CDs, watch TV, rip audio CDs into the open source Ogg audio format for playback, as well as manage your media library. You will also learn about how Ubuntu handles graphics and pictures.

Sound and Music Linux historically had a reputation of lacking good support for sound and multimedia applications in general. However, great strides have been made in recent years to correct this, and support is now a lot better than it used to be. (It might make you smile to know that Microsoft no longer supports the Microsoft Sound Card, but Linux users still enjoy support for it, no doubt just to annoy the folks in

. Viewing Video . Reference

154

CHAPTER 7


Redmond.) Unix, however, has always had good multimedia support as David Taylor, Unix author and guru, points out: The original graphics work for computers was done by Evans & Sutherland on Unix systems. The innovations at MIT’s Media Lab were done on Unix workstations. In 1985, we at HP Labs were creating sophisticated multimedia immersive work environments on Unix workstations, so maybe Unix is more multimedia than suggested. Limitations in Linux support doesn’t mean Unix had the same limitations. I think it was more a matter of logistics, with hundreds of sound cards and thousands of different possible PC configurations. That last sentence sums it up quite well. Unix had a limited range of hardware to support; Linux has hundreds of sound cards. Sound card device driver support has been long lacking from manufacturers, and there is still no single standard for the sound subsystem in Linux. In this section, you learn about sound cards, sound file formats, and the sound applications provided with Ubuntu.

Sound Cards Ubuntu supports a wide variety of sound hardware and software. Two models of sound card drivers compete for prominence in today’s market: . ALSA, the Advanced Linux Sound Architecture, which is entirely open source . OSS, the Open Sound System, which offers free and commercial drivers Ubuntu uses ALSA because ALSA is the sound architecture for the 2.6 series kernels. ALSA supports a long list of sound cards. You can review the list at http://www.alsaproject.org/alsa-doc/. If your sound card is not supported, it might be supported in the commercial version of OSS. You can download a trial version of commercial software and test your sound card at http://www.opensound.com/download.cgi. Ubuntu detects most sound cards during the original installation and should detect any new additions to the system during boot up. To configure the sound card at any other time, use the sound preferences graphical tool found under System, Preferences, Sound. In addition, since the 8.04 release, Ubuntu uses an additional layer of software called PulseAudio. PulseAudio is what is called a sound server and acts as a mediator between the various multimedia programs that have sound output and the ALSA kernel drivers. Over the years there have been many different sound servers used in Linux, each with different strengths, usability issues, and levels of documentation. These various sound servers have often been forced to run side by side on the same computer causing all sorts of confusion and issues. PulseAudio aims to replace all of them and work as a single handler to accept output from applications which use the APIs for any of the major sound servers already in use like ESD, OSS, Gstreamer, and aRts and route the various output streams together through one handler. This gives several advantages including the ability to control the output volume of various programs individually.

Sound and Music

155

PulseAudio is still quite young and not all of ifs full potential has yet been realized, however it has already seen great improvements in the intervening releases and is better and more powerful than ever in 9.10. While there were stability issues and complaints in the first release that included PulseAudio, those don't seem to be a problem any more except in unusual hardware combinations and special cases and more and more features have been implemented. For more information about PulseAudio, please see http://www.pulseaudio.org/ .

Adjusting Volume Ubuntu offers a handy utility that you can use to control the volumes for various outputs from your computer. For a simple master volume control, just click on the speaker icon in the top-right corner of the screen and move the slider up or down, as shown in Figure 7.1. Alternatively you can control all the output volumes for the system to make sure that you have set everything to your taste, as shown in Figure 7.2. To access the volume control, right-click on the speaker icon and select Open Volume Control.

FIGURE 7.1 Control the master volume level with the volume slider.

7

FIGURE 7.2 Use the volume control to manage volume settings for all your sound output devices.

156

CHAPTER 7


Sound Formats A number of formats exist for storing sound recordings. Some of these formats are associated with specific technologies, and others are used strictly for proprietary reasons. Ubuntu supports several of the most popular sound formats, including . raw (.raw)—More properly known as headerless format, audio files using this format contain an amorphous variety of specific settings and encodings. All other sound files contain a short section of code at the beginning—a header—that identifies the format type. . MP3 (.mp3)—A popular, but commercially licensed, format for the digital encoding used by many Linux and Windows applications. MP3 is not supported by any software included with Ubuntu (which advises you to use the open source Ogg-Vorbis format instead). . WAV (.wav)—The popular uncompressed Windows audio-visual sound format. It is often used as an intermediate file format when encoding audio. . Ogg-Vorbis (.ogg)—Ubuntu’s preferred audio encoding format. You enjoy better compression and audio playback, and freedom from lawsuits when you use this open-source encoding format for your audio files.

NOTE Because of patent and licensing issues, Ubuntu has removed support for the MPEG, MPEG2, and MPEG3 (MP3) file formats in Ubuntu Linux. Although we cannot offer any legal advice, it appears that individuals using MP3 software are okay; it is just that Ubuntu cannot distribute the code because it sells its distribution. It seems—at this point—perfectly all right for you to obtain an MP3-capable version of Xmms (for example), which is a Winamp clone that plays MPEG1/2/3 files. You can get Xmms directly from http://www.xmms.org/ because that group has permission to distribute the MP3 code. You can also enable the MP3 codec within Ubuntu by downloading a plugin for gstreamer, the GNOME audio system. You do this by installing the gstreamer0.10-pluginsugly package, which enables the MP3 codec in all the GNOME applications.

Ubuntu includes software (such as the sox command used to convert between sound formats) so that you can more easily listen to audio files provided in a wide variety of formats, such as AU (from NeXT and Sun), AIFF (from Apple and SGI), IFF (originally from Commodore’s Amiga), RA (from Real Audio), and VOC (from Creative Labs).

TIP To learn more about the technical details of audio formats, read Chris Bagwell’s Audio Format FAQ at http://www.cnpbagwell.com/audio.html.

Sound and Music

157

Ubuntu also offers utilities for converting sound files from one format to another. Conversion utilities come in handy when you want to use a sound in a format not accepted by your current application of choice. A repository of conversion utilities resides at http://ibiblio.org/pub/linux/apps/sound/convert/!INDEX.html and includes MP3 and music CD–oriented utilities not found in Ubuntu. You have to know how to compile and install from source, however. Ubuntu does provide sox, a self-described sound translator that converts music among the AIFF, AU, VAR, DAT, Ogg, WAV, and other formats. It also can be used to change many other parameters of the sound files. Timidity is a MIDI-to-WAV converter and player. If you are interested in MIDI and musical instruments, Timidity is a handy application; it handles karaoke files as well, displaying the words to accompany your efforts at singing.

Listening to Music If you’re anything like us, you might be a huge music fan. One of the downsides of having a fairly large music collection is the physical problem of having to store so many CDs. Wouldn’t it be great if you could pack them all away somewhere, yet still have access to all the music when you want it? Some hi-fi manufacturers experimented with rather bulky jukeboxes that stored 250 CDs at once. The main downside with that was that finding a particular piece of music could take hours, having to cycle through each CD in the hope that it would match your mood.

RhythmBox A standard CD player application was supplied in previous versions of Ubuntu, but this has now been dropped largely due to the fact that other applications made it redundant. In its place is RhythmBox, a useful application that does more than just play CDs. If you insert an audio CD into your computer, RhythmBox will appear and attempt to obtain information about the CD from the Internet service MusicBrainz. If it’s successful, then you’ll see the name of the CD appear in the left window of RhythmBox, as shown in Figure 7.3. When you’re ready to play your CD, simply click the name of the CD under the devices section and click the Play button, as shown in Figure 7.4. You can also define whether the CD should just repeat itself until stopped, or whether you want to shuffle the music (randomize the playlist). Of course, just listening to your CDs doesn’t really change anything; RhythmBox acts just like a regular CD player, allowing you to listen to specific tracks and define how you want to listen to your music by using playlists or sorting it by artists. The real fun starts when you click the Copy to Library button in your toolbar. RhythmBox then starts to extract, or

7

Fortunately for you and me, Ubuntu is fantastic at working with CDs, even allowing you to rip all your CD collection into a vast searchable music library, letting you quickly create playlists and even giving you the ability to create your own customized CDs. Getting started couldn’t be easier, mainly because Ubuntu comes preconfigured with everything you need to get started.

158

CHAPTER 7


FIGURE 7.3 RhythmBox automatically downloads information about your CD, if it’s available.

FIGURE 7.4 Just like the normal controls on a CD player, RhythmBox responds to your requests.

Sound and Music

159

rip, the audio from your CD and store it within the Music directory that is found under your home directory. If you have already clicked this button, then go to the Places menu and select Music (see Figure 7.5) to see what’s happening.

FIGURE 7.5 RhythmBox does a good job of keeping your newly ripped audio files organized.

Within the RhythmBox interface you can easily browse through the list of artist names or album titles, which affects the track listing that appears at the bottom of the screen. The numbers after each artist and album tell you how many tracks are assigned to that specific entry, giving you a heads up before you click on them. Double-clicking on any entry automatically starts the music playing, so for example, double-clicking an artist’s name causes the music tracks associated with that artist to start playing. When a track starts to play, RhythmBox automatically attempts to retrieve the CD artwork, which it then displays in the bottom-left corner of the screen, shown in Figure 7.7. There’s a lot more that you can do with RhythmBox, including downloading and listening to podcasts. A good place to start if you want to get hold of the latest podcasts is to head to the Linux Link (www.thelinuxlink.net) where you’ll find a long list of Linux-related podcasts. All you have to do is right-click on the RSS link for the Ogg feed and select Copy Link Location. Now go to RhythmBox and press Ctrl+P, or go to Music, New Podcast Feed, paste the link into the field, and click the Add button. RhythmBox then contacts the

7

Depending on the speed of your optical drive and the power of your computer, the ripping process can take up to 15 minutes to complete a full CD. As it goes along, RhythmBox automatically adds the files to your media library, which you can access by clicking the Music button on the left side of the RhythmBox screen, as you can see in Figure 7.6.

160

CHAPTER 7


FIGURE 7.6 RhythmBox gives you a neat interface to browse through your burgeoning music collection.

FIGURE 7.7 A nice touch is RhythmBox’s being able to automatically retrieve CD artwork from the Internet.

Sound and Music

161

server and attempts to download the most recent episodes of your chosen podcast, which you can see happening in Figure 7.8.

FIGURE 7.8 Manage your podcasts using RhythmBox and never miss an episode again.

Banshee can rip music in a similar way to RhythmBox; all you have to do is insert a CD and Banshee will detect it. If you want to import it into Banshee, simply select it in the left navigation pane and click the Import CD button. In Figure 7.10, you can see Banshee ripping a CD.

7

Banshee Of course, other programs are available for listening to music within Ubuntu. One of our particular favorites is Banshee, another music application that can also handle ripping and playing back music. Banshee is not installed by default with Ubuntu, so you’ll need to use synaptic to download and install it. After it’s installed, you can access it under Applications, Sound and Video, as shown in Figure 7.9, complete with a selection of music.

162

CHAPTER 7


FIGURE 7.9 Banshee provides an uncluttered interface, cutting straight to letting you listen to your music.

FIGURE 7.10 Banshee makes light work of ripping your CD collection. Just as with RhythmBox, Banshee will attempt to download the cover art and track information for the CD that you’re either playing or ripping.

Graphics Manipulation

163

Getting Music into Ubuntu with Sound Juicer A handy utility that is included with Ubuntu is Sound Juicer, found under Applications, Sound and Video as the Audio CD Extractor. Sound Juicer automatically detects when you install a CD and attempt to retrieve the track details from the Internet. From there it will rip the CD tracks into Ogg files for storage on your filesystem. You can see Sound Juicer in action in Figure 7.11

FIGURE 7.11 Create your own digital music collection with Sound Juicer.

7

Graphics Manipulation Over a very short space of time, digital cameras and digital imagery have become extremely popular, to the point where some traditional film camera manufacturers are switching solely to digital. This meteoric rise has led to an increase in the number of applications that can handle digital imagery. Linux, thanks to its rapid pace of development, is now highly regarded as a multimedia platform of choice for editing digital images. This section of the chapter discusses The GIMP, a powerful graphics manipulation tool. You also learn about graphic file formats supported by Ubuntu, as well as some tools you can use to convert them if the application you want to use requires a different format.

The GNU Image Manipulation Program One of the best graphics clients available is The GIMP. The GIMP is a free, GPLed image editor with sophisticated capabilities that can import and export more than 30 different graphics formats, including files created with Adobe Photoshop. It is often compared with

164

CHAPTER 7


Photoshop, and The GIMP represents one of the GNU Projects’ first significant successes. Many images in Linux were prepared with The GIMP. The GIMP can be found under the Applications, Graphics menu as simply The GIMP. You see an installation dialog box when The GIMP is started for the first time, and then a series of dialog boxes that display information regarding the creation and contents of a local GIMP directory. This directory can contain personal settings, preferences, external application resource files, temporary files, and symbolic links to external software tools used by the editor.

What Does Photoshop Have That Isn’t in the GIMP? Although The GIMP is powerful, it does lack two features Adobe Photoshop offers that are important to some graphics professionals. The first of these is the capability to generate color separations for commercial press printers (CMYK for the colors cyan, magenta, yellow, and key [or black]). The GIMP uses RGB (red, green, and blue), which is great for video display, but not so great for printing presses. The second feature The GIMP lacks is the use of Pantone colors (a patented color specification) to ensure accurate color matching. If these features are unimportant to you, The GIMP is an excellent tool. If you must use Adobe Photoshop, the current version of CodeWeavers’ CrossOver Office will run Photoshop in Linux. These deficiencies might not last long. A CMYK plug-in is in the works, and the Pantone issues are likely to be addressed in the near future as well.

After the initial configuration has finished, The GIMP’s main windows and toolboxes appear. The GIMP’s main window contains tools used for selecting, drawing, moving, view enlarging or reducing, airbrushing, painting, smudging, copying, filling, and selecting color. Depending on the version installed on your system, the toolbox can host more than 25 different tools. The toolbox’s File, Xtns, and Help menus are used for file operations (including sending the current image by electronic mail), image acquisition or manipulation, and documentation, respectively. If you right-click an open image window, you see the wealth of The GIMP’s menus, as shown in Figure 7.12.

Using Scanners in Ubuntu With the rise of digital photography, there has been an equal decline in the need for image scanners. However, there are still times that you want to use a scanner, and Ubuntu makes it easy. You can also use many types of image scanners with The GIMP. In the past, the most capable scanners required a SCSI port. Today, however, most scanners work through a USB port. You must have scanner support enabled for Linux (usually through a loaded kernel module, scanner.o) before using a scanner with The GIMP.


165

FIGURE 7.12 Right-click on an image window to access The GIMP’s cascading menus.

SANE consists of two software components. A low-level driver enables the hardware support and is specific to each scanner. Next, a graphical scanner interface X client known as xsane is used as a plug-in or ancillary program (or script) that adds features to The GIMP.

NOTE Although xsane is commonly used as a GIMP plug-in, it can also be used as a standalone program. Another useful program is Joerg Schulenburg’s gocr client, used for optical character recognition (OCR). Although not a standalone application, it is included in the Kooka scanning application. This program works best with 300 dots per inch (dpi) scans in several different graphics formats. OCR is a resource-intensive task and can require hundreds of megabytes of disk storage!

A list of currently supported scanners can be found at http://www.sane-project.org/sanesupported-devices.html. Unfortunately, if your scanner doesn’t appear on the list, you should not expect it to work with the SANE software. There is also a list on that same page

7

Although some scanners can work via the command line, you will enjoy more productive scanning sessions if you use a graphical interface because GUI features, such as previewing and cropping, can save time before actually scanning an image. Most scanners in use with Linux use the Scanner Access Now Easy (SANE) package, which supports and enables graphical scanning sessions.

166

CHAPTER 7


for drivers not yet included, but you must be able to compile the application from source to use them. Supported USB scanners are automatically detected and the appropriate driver is loaded automatically. The USB devices tell the USB system several pieces of information when they are connected—the most important of which are the vendor ID and the device ID. This identification is used to look up the device in a table and load the appropriate driver. You will find that Ubuntu successfully identifies and configures most modern USB-based scanners. Many scanners are supported in Linux. If yours is not, it still might be possible to use it. The Kooka and Xsane scanner applications are included with Ubuntu and are fairly straightforward to use. They can both be found in the Graphics menu as the Scanner Tool.

Working with Graphics Formats Image file formats are developed to serve a specific technical purpose (lossless compression, for example, where the file size is reduced without sacrificing image quality) or to meet a need for a proprietary format for competitive reasons. Many file formats are covered by one or more patents. For example, the GIF format had fallen into disfavor with the open-source crowd because the patent holder waited a while before deciding to enforce his patent rights rather than being upfront with requests for patent royalties. If you want to view or manipulate an image, you need to identify the file format to choose the proper tool for working with the image. The file’s extension is your first indicator of the file’s format. The graphics image formats supported by the applications included with Ubuntu include . .bmp—Bitmapped graphics, commonly used in Microsoft Windows . .gif—CompuServe Graphics Interchange Format . .jpg—Joint Photographic Experts Group . .pcx—IBM Paintbrush . .png—Portable Network Graphics . .svg—Scalable Vector Graphics . .tif—Tagged Image File format An extensive list of image file extensions can be found in the man page for ImageMagick, an excellent application included with Ubuntu, which you learn more about in upcoming sections of this chapter.


167

TIP Ubuntu includes dozens of graphics conversion programs that are accessible through the command line, and there are few, if any, graphics file formats that cannot be manipulated when using Linux. These programs can be called in Perl scripts, shell scripts, or command-line pipes to support many types of complex format conversion and image manipulation tasks. See the man pages for the ppm, pbm, pnm, and pgm families of commands. Also see the man page for the convert command, which is part of a suite of extremely capable programs included with the ImageMagick suite.

Often, a file you want to manipulate in some way is in a format that cannot be used by either your graphics application or the final application. The solution is to convert the image file—sometimes through several formats. The convert utility from ImageMagick is useful, as is the netpbm family of utilities. If it is not already installed, ImageMagick can be installed with the Add Remove Software GUI found in the System Settings menu; the netpbm tools are always installed by default. The convert utility converts between image formats recognized by ImageMagick. Color depth and size also can be manipulated during the conversion process. You can use ImageMagick to append images, surround them with borders, add labels, rotate and shade them, and perform other manipulations well suited to scripting. Commands associated with ImageMagick include display, animate, identify, and import. The application supports more than 130 different image formats—(all listed in the man page for ImageMagick).

. The man page for ppm, the portable pixmap file format, lists 47 conversion utilities related to ppm. This makes sense because ppm, or portable pixmap, is considered the lowest common denominator for color image files. It is therefore often used as an intermediate format. . The man page for pgm, the portable graymap file format, lists 22 conversion utilities. This makes sense because pgm is the lowest common denominator for grayscale image files. . The man page for pnm, the portable anymap file format, lists 31 conversion utilities related to it. However, there is no format associated with PNM because it operates in concert with ppm, pgm, and pbm. . An examination of the man page for pbm, the portable bitmap file format, reveals no conversion utilities. It’s a monochrome format and serves as the foundation of the other related formats.

7

The netpbm tools are installed by default because they compose the underpinnings of graphics format manipulation. The man page for each image format lists related conversion utilities; the number of those utilities gives you some indication of the way that format is used and shows how one is built on another:

168

CHAPTER 7


Capturing Screen Images You can use graphics manipulation tools to capture images that are displayed on your computer screen. Although this technique was used for the production of this book, it has broader uses; there is truth to the cliché that a picture is worth a thousand words. Sometimes it is easier to show an example than it is to describe it. A captured screen image (also called a screen grab or a screenshot) can be used to illustrate an error in the display of an application (a font problem, for example) or an error dialog that is too complex to copy down by hand. You might just want to share an image of your beautifully crafted custom desktop configuration with your friends or illustrate your written documents. When using the GNOME desktop, you can take advantage of the built-in screenshot mechanism (gnome-panel-screenshot). Access this tool by pressing the Print Screen key. (Alt+Print Screen takes a screenshot of only the window that has focus on a desktop.) Captured images are saved in .png format.

Using Digital Cameras with Ubuntu Most digital cameras used in connection with Ubuntu fall into one of two categories: webcams (small, low-resolution cameras connected to the computer’s interface) or handheld digital cameras that record image data on disks or memory cards for downloading and viewing on a PC. Ubuntu supports both types. Other types of cameras, such as surveillance cameras that connect directly to a network via wired or wireless connections, need no special support (other than a network connection and viewing software) to be used with a Linux computer. Ubuntu supports hundreds of different digital cameras, from early parallel-port (CPiA chipset-based) cameras to today’s USB-based cameras. You can even use Intel’s QX3 USB microscope with Ubuntu. If you prefer a standalone network-based webcam, explore the capabilities of Linux-based cameras from Axis (at http://www.axis.com/products/video/ camera/productguide.htm). The following sections describe some of the more commonly used still camera hardware and software supported by Ubuntu.

Handheld Digital Cameras Digital cameras are one of the major success stories of the last few years. Now you can take pictures and see previews of your pictures immediately. The pictures themselves are stored on discs or memory cards that can be easily plugged into Ubuntu for further manipulation, using The GIMP or other software. Unfortunately, most of the supplied software that comes with the cameras tend to be for Windows users only, making you reliant on the packages supplied with Ubuntu. The good news, though, is that because of the good development carried out in Ubuntu and GNOME, you are now able to plug pretty much any camera into your computer through a USB interface and Ubuntu automatically recognizes the camera as a USB mass

Using Digital Cameras with Ubuntu

169

storage device. You can even set Ubuntu to recognize when a camera is plugged in so that it automatically imports your photographs for you. To do this, you need to set up your settings for removable drives and media. You can find this in the System, Preferences menu. Click the Cameras tab and select the option to import digital photographs when connected (see Figure 7.13).

FIGURE 7.13 Use GNOME’s intelligent handling of removable media by setting it to import your photographs automatically.

FIGURE 7.14 GNOME detects the presence of a digital camera and asks whether the photos should be imported.

Using F-Spot Ubuntu has access to the superb F-Spot photo management application. When F-Spot is installed, you can find it under the Applications, Graphics menu listed as F-Spot Photo Manager. If you have used the popular Google Picasa application, you will feel instantly at home with F-Spot because it is similar in many ways.

7

Now whenever you connect a digital camera to your computer GNOME automatically detects it (see Figure 7.14), and asks whether you want to import the photographs.

170

CHAPTER 7


The first time you open F-Spot, you are asked to import your first batch of photographs, as shown in Figure 7.15. You can also assign a tag to them, if you want to track particular types of photographs. You might want to allow F-Spot to copy the photograph to a new directory, Photos—something that may help you organize your photos on the system.

FIGURE 7.15 The versatile F-Spot makes adding photos to your library easy. When you are ready, click Import to let F-Spot import the photos into the library. The pictures appear in the F-Spot library, and are stored according to the date they were taken. This information is given to F-Spot by the EXIF information that your camera stores each time you take a picture. In Figure 7.16, you can see the standard F-Spot window. Use the timeline across the top of the window to browse through your photographs, and you can do some minor editing by double-clicking on any photograph. F-Spot is still in its infancy, but development is ongoing, so keep a eye open for any major updates.

Burning CDs and DVDs in Ubuntu Linux is distributed across the Internet through the use of ISOs that are waiting to be written to CDs or DVDs. Therefore learning how to burn discs is essential if you have to download and install a Linux distribution. Not only that, but you are likely to want to use CDs and, more commonly, DVDs to back up your music, family pictures, or other important files. With DVD writers being so cheap, the format is now pervasive and more and more people use cheap DVDs as way of archiving simply due to the larger storage size available. Of course, you can use blank CD media, but they don’t have anywhere near the capacity offered by DVDs albeit being slightly cheaper. Today’s high-resolution digital cameras can occupy upward of 3MB per shot, and music files can be anything from 1MB to 10MB+ in size. These file sizes make DVD the obvious choice, but there are still occasions when you need to write to a CD. You can use CDs and DVDs to

Burning CDs and DVDs in Ubuntu

171

FIGURE 7.16 Browse through your extensive photo collection and correct minor problems using F-Spot. . Record and store multimedia data, such as backup files, graphics images, and music. . Rip audio tracks from music CDs (ripping refers to extracting music tracks from a music CD) and compile your own music CDs for your personal use.

# wodim -scanbus scsibus0: 0,0,0 0,1,0 0,2,0

0) ‘HL-DT-ST’ ‘RW/DVD GCC-4120B’ ‘2.01’ Removable CD-ROM 1) * 2) *

0,3,0 0,4,0

3) * 4) *

0,5,0 0,6,0 0,7,0

5) * 6) * 7) *

7

Linux audio clients and programs support the creation and use of many different types of audio formats. Later sections of this chapter discuss sound formats, sound cards, music players, and much more. Because CD burning is used for many other purposes in Ubuntu, we cover the essentials of that process first in this chapter. To record multimedia data on a CD, you must have installed a drive with CD writing capabilities on your system. To make certain that your CD writer is working, use wodim -scanbus to get the information for using the CD drive under SCSI (small computer system interface) emulation:

172

CHAPTER 7


Here, you can see that the CD writer (in this example, a CD writer/DVD reader) is present and is known by the system as device 0,0,0. The numbers represent the scsibus/target/lun (logical unit number) of the device. You need to know this device number when you burn the CD, so write it down or remember it.

Creating CDs and DVDs with Ubuntu’s Graphical Clients Although adequate for quick burns and use in shell scripting, the command-line technique for burning CDs and DVDs is an awkward choice for many people until they become proficient at it and learn all the arcane commands. Fortunately, Ubuntu provides several graphical clients. Nautilus With Ubuntu, enhanced functionality has been included in the default file browser Nautilus. Under the Places menu item is a CD/DVD Creator selection. To use it, insert a blank CD or DVD into your CD-R/DVD-R drive. You must have two Nautilus windows open: one that shows the files you want to save to the CD, and a second one open to the CD/DVD Creator Folder (accessed in Nautilus by the Places menu, CD/DVD Creator) location. Click on the Write to Disc button as shown in Figure 7.17 to bring up the Write dialog; at the next dialog box, choose the format to which you want to write the disc. Nautilus CD/DVD Creator supports writing to a disc image file, commonly known as ISO. You can also give your new disc a label and tell Nautilus at what speed you want to write the disc. Finally, click the Write button to start the burning process—it is that simple!

FIGURE 7.17 Creating a CD or DVD using the Nautilus browser is made easy with the dragand-drop features it provides. Brasero A relatively new addition to the Ubuntu default distribution is Brasero, an easy-to-use graphical CD and DVD burning application. Installed as part of the standard Live CD installation, Brasero is found under Applications, Sound and Video as Brasero Disc Burning.


173

Brasero takes a project-based approach to disc burning, opening up with a wizard that allows you to select from four different tasks that you’ll commonly want to do. You can see the opening screen in Figure 7.18. Brasero also remembers previous “projects” allowing you to quickly create several copies of a disc, which is ideal if you’re planning on passing on copies of Ubuntu to your friends and family.

FIGURE 7.18 A new but welcome addition is Brasero, giving you an intuitive way to create data and audio CDs and DVDs.

FIGURE 7.19 Brasero can write to a selection of recordable media, even accommodating overburning if you want to use it. When you’re ready to create your disc, simply click the Burn button and Brasero will ask you to choose a label for the disc. You’re also able to choose whether you want to create an image (very useful if you plan to make multiple copies of the same disc although not at

7

Burning a Data CD or DVD is as easy as selecting the option in the opening screen and dragging and dropping the files you want to include from the directory tree on the left to the drop area on the right. Brasero keeps an eye on the disc size, and tells you when you exceed the limits. By default it selects a 4.3GB DVD, but you can change this by using the CD icon toward the bottom of the screen (shown in Figure 7.19). Brasero also allows you the option to overburn a CD or DVD. Overburning makes use of extra space on recordable media by squeezing a little extra onto your disc. It can add up to an additional 10% of the disc’s capacity, but it runs the risk of making the disc incompatible with CD or DVD drives because overburning does not adhere to established standards.

174

CHAPTER 7


the same time). You can do this by selecting File, image in the drop-down menu on the Burn screen (see Figure 7.20). To ensure that your disc image can be used with your friends and colleagues who use Windows, you should choose the Increase compatibility with Windows systems option.

FIGURE 7.20 If you’re creating an image for use with Windows, use the compatibility option to ensure it will work. Finally, click the Burn button to start the process and Brasero will start creating your new CD or DVD. How long it takes depends on the amount of data you are writing and also the speed of your drive.

Creating CDs from the Command Line In Linux, creating a CD at the command line is a two-step process. You first create the iso9660-formatted image, and you then burn or write the image onto the CD. The iso9660 is the default file system for CD-ROMs. Use the mkisofs command to create the ISO image. The mkisofs command has many options (see the man page for a full listing), but use the following for quick burns: $ mkisofs -r -v -J -l -o /tmp/our_special_cd.iso /source_directory

The options used in this example are as follows: . -r—Sets the permission of the files to more useful values. UID and GID (individual and group user ID requirements) are set to zero, all files are globally readable and searchable, and all files are set as executable (for Windows systems). . -v—Displays verbose messages (rather than terse messages) so that you can see what is occurring during the process; these messages can help you resolve problems if they occur.


175

. -J—Uses the Joliet extensions to ISO9660 so that your Windows-using buddies can more easily read the CD. The Joliet (for Windows), Rock Ridge (for Unix), and HSF (for Mac) extensions to the iso9660 standard are used to accommodate long filenames rather than the eight-character DOS filenames that the iso9660 standard supports. . -l—Allows 31-character filenames; DOS does not like it, but everyone else does. . -o—Defines the directory where the image will be written (that is, the output) and its name. The /tmp directory is convenient for this purpose, but the image could go anywhere you have write permissions. . /source_directory—Indicates the path to the source directory; that is, the directory containing the files you want to include. There are ways to append additional paths and exclude directories (and files) under the specified path—it is all explained in the man page, if you need that level of complexity. The simple solution is to construct a new directory tree and populate it with the files you want to copy, and then make the image using that directory as the source. Many more options are available, including options to make the CD bootable. After you have created the ISO image, you can write it to the CD with the cdrecord command: $ cdrecord -eject -v speed=12 dev=0,0,0 /tmp/our_special_cd.iso

The options used in this example are as follows: . -eject—Ejects the CD when the write operation is finished. . -v—Displays verbose messages.

. dev=—Specifies the device number of the CD writer (the number I told you to write down earlier).

NOTE You can also use the blank= option with the cdrecord command to erase CD-RW disks. The cdrecord command has fewer options than mkisofs does, but it offers the -multi option, which enables you to make multisession CDs. A multisession CD enables you to write a data track, quit, and then add more data to the CD later. A single-session CD can be written to only once; any leftover CD capacity is wasted. Read about other options in the cdrecord man page. Current capacity for CD media is 700MB of data or 80 minutes of music. (There are 800MB/90 minute CDs, but they are rare.) Some CDs can be overburned; that is, recorded to a capacity in excess of the standard. The cdrecord command is capable of overburning if your CD-RW drive supports it. You can learn more about overburning CDs at http://www.cdmediaworld.com/hardware/cdrom/cd_oversize.shtml/.

7

. speed=—Sets the speed; the rate depends on the individual drive’s capabilities. If the drive or the recordable medium is poor, you can use lower speeds to get a good burn.

176

CHAPTER 7


Creating DVDs from the Command Line There are several competing formats for DVD, and with prices rapidly falling, it is more likely that DVD-writing drives will become commonplace. The formats are as follows: . DVD+R . DVD-R . DVD+RW . DVD-RW Differences in the + and – formats have mostly to do with how the data is modulated onto the DVD itself, with the + format having an edge in buffer underrun recovery. How this is achieved impacts the playability of the newly created DVD on any DVD player. The DVD+ format also has some advantages in recording on scratched or dirty media. Most drives support the DVD+ format. As with any relatively new technology, your mileage may vary. We focus on the DVD+RW drives because most drives support that standard. The software supplied with Ubuntu has support for writing to DVD-R/W (rewritable) media as well. It will be useful for you to review the DVD+RW/+R/-R[W] for Linux HOWTO at http://fy.chalmers.se/~appro/linux/DVD+RW/ before you attempt to use dvd+rw-tools, which you need to install to enable DVD creation (also known as mastering) as well as the cdrtools package. You can ignore the discussion in the HOWTO about kernel patches and compiling the tools.

TIP The 4.7GB size of DVD media is measured as 1000 megabytes per gigabyte, instead of the more commonly used 1024 megabytes per gigabyte, so do not be surprised when the actual formatted capacity, about 4.4GB, is less than you anticipated. dvd+rw-tools does not allow you to exceed the capacity of the disk.

You need to have the dvd+rw-tools package installed (as well as the cdrtools package). The dvd+rw-tools package contains the growisofs application (that acts as a front end to mkisofs) as well as the DVD formatting utility. You can use DVD media to record data in two ways. The first way is much the same as that used to record CDs in a session, and the second way is to record the data as a true file system, using packet writing.

Session Writing To record data in a session, you use a two-phase process: 1. Format the disk with dvd+rw-format /dev/scd0 (only necessary the first time you use a disk). 2. Write your data to the disk with growisofs -Z /dev/scd0 -R -J /your_files.


177

The growisofs command simply streams the data to the disk. For subsequent sessions, use the -M argument instead of -Z. The -Z argument is used only for the initial session recording; if you use the -Z argument on an already used disk, it erases the existing files.

CAUTION Some DVDs come preformatted; formatting them again when you use them for the first time can make the DVD useless. Always be sure to carefully read the packaging your DVD comes in to ensure that you are not about to create another coaster!

TIP Writing a first session of at least 1GB helps maintain compatibility of your recorded data with other optical drives. DVD players calibrate themselves by attempting to read from specific locations on the disk; you need data there for the drive to read it and calibrate itself. Also, because of limitations to the ISO9660 file system in Linux, do not start new sessions of a multisession DVD that would create a directory past the 4GB boundary. If you do so, it causes the offsets used to point to the files to “wrap around” and point to the wrong files. Packet Writing Packet writing treats the CD or DVD disk like a hard drive in which you create a file system (like ext3) and format the disk, and then write to it randomly as you would to a conventional hard drive. This method, although commonly available on Windows-based computers, is still experimental for Linux and is not yet covered in detail here.

7

TIP DVD+RW media are capable of only about 1,000 writes, so it is very useful to mount them with the noatime option to eliminate any writing to update their inodes or simply mount them read-only when it’s not necessary to write to them.

It is possible to pipe data to the growisofs command: # your_application | growisofs -Z /dev/scd0=/dev/fd/0

It is also possible to burn from an existing image (or file, named pipe, or device): # growisofs -Z /dev/scd0=image

The dvd+rw-tools documentation, found at /usr/share/doc/dvd+rw-tools-*/index.html, is required reading before your first use of the program. We also suggest that you experiment with DVD-RW (rewritable) media first, as if you make mistakes then you will still be able to reuse the disk, rather than creating several new coasters for your coffee mug.

178

CHAPTER 7


Viewing Video You can use Ubuntu tools and applications to view movies and other video presentations on your PC. This section presents some TV and motion picture video software tools included with the Ubuntu distribution you received with this book.

TV and Video Hardware To watch TV and video content on your PC, you must install a supported TV card or have a video/TV combo card installed. A complete list of TV and video cards supported by Ubuntu is at http://www.exploits.org/v4l/. Freely available Linux support for TV display from video cards that have a TV-out jack is poor. That support must come from the X driver, not from a video device that Video4Linux supports with a device driver. Some of the combo TV-tuner/video display cards have support, including the Matrox Marvel, the Matrox Rainbow Runner G-Series, and the RivaTV cards. Many other combo cards lack support, although an independent developer might have hacked something together to support his own card. Your best course of action is to perform a thorough Internet search with Google. Many of the TV-only PCI cards are supported. In Linux, however, they are supported by the video chipset they use, and not by the name some manufacturer has slapped on a generic board (the same board is typically sold by different manufacturers under different names). The most common chipset is the Brooktree Bt*** series of chips; they are supported by the bttv device driver. If you have a supported card in your computer, it should be detected during installation. If you add it later, the Kudzu hardware detection utility should detect it and configure it. You can always configure it by hand. To determine what chipset your card has, use the lspci command to list the PCI device information, find the TV card listing, and look for the chipset that the card uses. For example, the lspci output for my computer shows $ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 [IGD4-1P] System Controller (rev 13) 00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 [IGD4-1P] AGP Bridge 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40) 00:07.1 IDE interface: VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE (rev 06) 00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 1a) 00:07.3 USB Controller: VIA Technologies, Inc. USB (rev 1a) 00:07.4 SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40) 00:09.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02) 00:0b.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 02) 00:0b.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 02) 00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)

Viewing Video

179

00:0f.0 FireWire (IEEE 1394): Texas Instruments TSB12LV23 IEEE-1394 Controller 00:11.0 Network controller: Standard Microsystems Corp [SMC] SMC2602W EZConnect 01:05.0 VGA compatible controller: nVidia Corporation NV15 [GeForce2 Ti] (rev a4)

Here, the lines listing the multimedia video controller and multimedia controller say that this TV board uses a Brooktree Bt878 Video Capture chip and a Brooktree Bt878 Audio Capture chip. This card uses the Bt878 chipset. Your results will be different, depending on what card and chipset your computer has. This card happened to be an ATI All-in-Wonder VE (also known as ATI TV-Wonder). (The VE means Value Edition; hence, there is no TVout connector and no radio chip on the card; what a value!) The name of the chipset says that the card uses the bttv driver. In the documentation directory is a file named CARDLIST, and in that file is the following entry, among others: card=64 - ATI TV-Wonder VE

There are 105 cards listed, as well as 41 radio cards, including card=0 -

*** UNKNOWN/GENERIC ***

which is what you could have used had you not known the manufacturer’s name for the card. The file named Modules.conf, located in the same directory, offers the following example of information to place in the /etc/modules.conf file:

i2c-dev i2c_debug=1 bit_test=1

$ bttv alias char-major-81 alias char-major-81-0 options bttv options tuner

videodev bttv card=2 radio=1 debug=1

All you need do is enter this information into /etc/modules.conf and change the value for card=2 to card=64 to match your hardware. Youcan delete the reference to the radio card (radio=2) because there isn’t one and leave the other values alone. Then you must execute $ sudo depmod -a

to rebuild the modules dependency list so that all the modules are loaded automatically. When finished, all you need do is execute $ sudo modprobe bttv

7

$ i2c alias char-major-89 options i2c-core options i2c-algo-bit

180

CHAPTER 7


and your TV card should be fully functional. All the correct modules will be automatically loaded every time you reboot. Ubuntu is clever enough to detect and configure a supported TV card that is present during installation.

TIP Other useful documentation can be found in /usr/src/linux2.6/Documentation/_video4linux. After you have identified a driver for a device, it does not hurt to look at the source code for it because so little formal documentation exists for many drivers; much of it is in the source code comments.

The development of support for TV cards in Linux has coalesced under the Video4Linux project. The Video4Linux software provides support for video capture, radio, and teletext devices in Ubuntu.

Video Formats Ubuntu recognizes a variety of video formats. The formats created by the MPEG group, Apple, and Microsoft dominate, however. At the heart of video formats are the codecs—the encoders and decoders of the video and audio information. These codecs are typically proprietary, but free codecs do exist. Here is a list of the most common video formats and their associated file extensions: . .mpeg—The MPEG video format; also known as .mpg . .qt—The QuickTime video format from Apple . .mov—Another QuickTime video format . .avi—The Windows audio visual format

TIP An RPM that provides a Divx codec for Linux can be found at http://www.freshrpms. net/. Divx is a patented MPEG-4 video codec that is the most widely used codec of its type. It allows for compression of MPEG-2 video by a factor of 8. See http://www.divx. com/ for more information. The GetCodecs application is a Python script with a GUI interface that downloads, installs, and configures your Ubuntu system with multimedia codecs not provided by Ubuntu, such as MP3, Divx, and DVD codecs. The script can be obtained from http:/ /sourceforge.net/projects/getcodecs/.

If you need to convert video from one format to another, you use encoder applications called grabbers. These applications take raw video data from a video device such as a camera or TV card, and convert it to one of the standard MPEG formats or to a still image format, such as JPEG or GIF. Ubuntu does not supply any encoder applications (other than

Viewing Video

181

ppmtompeg, which encodes MPEG-1 video), but you can find them at http://www.

freshrpms.net/ or another online source (see the “Reference” section at the end of this chapter).

Viewing Video in Linux Out of the box, Ubuntu does not support any of the proprietary video codecs due to licensing restrictions. However this functionality can be restored if you install the full version of the applications described in this section from the Universe repository. There you can find multimedia applications such as Ogle, Xine, AlsaPlayer, Gstreamer, Grip, Mplayer, VCDImager, VideoLAN-client, Xmms, and Zapping. You can use Linux software to watch TV, save individual images (take snapshots) from a televised broadcast, save a series of snapshots to build animation sequences, or capture video, audio, or both. The following sections describe some of the ways in which you can put Linux multimedia software to work for you. You can watch MPEG and DVD video with Xine. Xine is a versatile and popular media player that is not included with Ubuntu. Xine is used to watch AVI, QuickTime, Ogg, and MP3 files (the latter is disabled in Ubuntu).

Adobe Flash

Another interesting video viewer application is MPlayer (not provided by Ubuntu), a movie player for Linux. MPlayer can use Win32 codecs and it supports a wider range of video formats than Xine, including Divx and some RealMedia files. MPlayer also uses some special display drivers that support Matrox, 3Dfx, and Radeon cards and can make use of some hardware MPEG decoder boards for better MPEG decoding. Look for Ubuntu packages at http://www.mplayerhq.hu; a Win32 codec package is also available, as well as other codec packages and a GUI interface.

Personal Video Recorders The best reason to attach a television antenna to your computer, however, is to use the video card and the computer as a personal video recorder. The commercial personal video recorder, TiVo, uses Linux running on a PowerPC processor to record television programming with a variety of customizations. TiVo has a clever interface and wonderful features, including a record/playback buffer, programmed recording and pause, slow motion, and reverse effects. Ubuntu does not provide any of the many applications that attempt to mimic the TiVo functionality on a desktop PC running

7

The Adobe Flash plug-in for the Firefox browser is a commercial multimedia application that isn’t provided with Ubuntu out of the box, but many people find it useful. Adobe Flash enables you to view Flash content at websites that support it. The easiest way of getting hold of the official version of Flash is to install the flashplugin-nonfree package either using apt-get or synaptic. Once you’ve done this, any flash animations will play quite happily within any Firefox-based browsers.

182

CHAPTER 7


Linux. However, several such applications, including DVR, The Linux TV Project, and OpenPVR, are listed at http://www.exploits.org/v4l/. These projects are in development and do not provide .rpm files, so you have to know how to download from CVS and compile your own binaries. For something a little easier, check out MythTV at http://www. mythtv.org/; a Ubuntu .rpm file should be available from ATRpms.

Linux, TiVo, and PVRs Some TiVo users say that using this Linux-based device has changed their lives. Indeed, the convenience of using a personal video recorder (PVR) can make life a lot easier for inveterate channel surfers. Although PVR applications are not included with Ubuntu, open source developers are working on newer and better versions of easy-toinstall and easy-to-use PVR software for Linux. For more information about TiVo, which requires a monthly charge and a phone line (or broadband connection with a newer TiVo2), browse to http://www.tivo.com/. Unrepentant Linux hardware hackers aiming to disembowel or upgrade a TiVo can browse to http://www.9thtee.com/tivoupgrades.htm or read the TiVo Hack FAQ at http://www.tivofaq.com/. A PVR makes viewing television a lot more fun! A number of Linux sites are devoted to PVR software development. Browse to the DVR project page at http://www.pierrox.net/dvr/.

DVD and Video Players You can now easily play DVDs with Ubuntu as long as you install the appropriate software. (Ubuntu doesn’t provide any.) Browse to http://www.videolan.org/, and then download, build, and install the vlc client. You must have a CPU of at least 450MHz and a working sound card to use a DVD player. The default Ubuntu kernel supports the DVD CD-ROM file system. As mentioned earlier, Xine and MPlayer do a great job of playing DVD files.

NOTE The VideoLAN HOWTO found at http://videolan.org/ discusses the construction of a network for streaming video. Although you might not want to create a network, a great deal of useful information about the software and hardware involved in the enterprise can be generalized for use elsewhere, so it is worth a look. The site also contains a link to a HOWTO about cross-compiling on Linux to produce a Windows binary.

Reference . http://www.cdcopyworld.com/—A resource for technical information about CD media and CD writers. . http://hardware.redhat.com/hcl/—A database of supported hardware. . http://www.opensound.com/download.cgi—The commercial OSS sound driver trial version download.

Reference

183

. http://www.xmms.org/—Home to the Xmms audio player. . http://www.thekompany.com/projects/tkcoggripper/—A free (but not GPL) Ogg CD ripper. . http://faceprint.com/code/—An MP3 to Ogg converter named mp32ogg. . http://www.ibiblio.org/pub/linux/apps/sound/convert/!INDEX.html—Home to several sound conversion utilities. . http://linux-sound.org/—An excellent resource for Linux music and sound. . http://www.cnpbagwell.com/audio.html—The Audio Format FAQ. . http://www.icecast.org/—A streaming audio server. . http://www.linuxnetmag.com/en/issue4/m4icecast1.html—An Icecast tutorial. . http://linuxselfhelp.com/HOWTO/MP3-HOWTO-7.html—The MP3 HOWTO contains brief descriptions of many audio applications and, although it focuses on the MP3 format, the information is easily generalized to other music formats. . http://www.exploits.org/v4l/—Video for Linux resources. . http://fame.sourceforge.net/—Video encoding tools. . http://teletext.mb21.co.uk/faq.shtml—The Teletext FAQ. . http://xine.sourceforge.net/—Home of the Xine DVD/video player. . http://www.MPlayerHQ.hu/homepage/—Home to the MPlayer video player. . http://www.videolan.org/—A VideoLAN project with good documentation.

. http://www.gimp.org—Home page of The GIMP (Gnu Image Manipulation Program. . http://f-spot.org—Home page of the F-Spot project. . http://www.linuxformat.co.uk—Website of Linux Format, home of a long-running GIMP tutorial by Michael J Hammel. . http://www.exif.org—More information on EXIF and how it is used in digital cameras. . http://www.sane-project.org—Home page of the SANE (Scanner Access Now Easy) project. . http://www.imagemagick.org—Home page for ImageMagick. . http://www.codeweavers.com—Home of the popular crossover office; required if you want to try to run Photoshop under Linux. . http://gimp.net/tutorials/—Official tutorials for The GIMP.

7

. http://fy.chalmers.se/~appro/linux/DVD+RW/—The DVD+RW/+R/-R[W] for Linux, a HOWTO for creating DVDs under Linux.


CHAPTER

8


IN THIS CHAPTER . Overview of Ubuntu Printing . Configuring and Managing Print Services . Creating and Configuring Local Printers . Reference

From the word go, Ubuntu provides support for a huge range of printers from many different manufacturers. This chapter looks at how to get your printer connected and talking to Ubuntu, as well as at the software that Ubuntu uses to manage printers and print jobs. In keeping with most of the other Linux distributions, Ubuntu uses CUPS (Common Unix Printing System) to handle printers. Other systems are supported, such as LPRng, but you do not have access to some of the graphical management tools from within Ubuntu.

The Internet Printing Protocol CUPS supports the Internet Printing Protocol, known as IPP, and offers a number of unique features, such as network printer directory (printer browsing) services, support for encryption, and support for PostScript Printer Description (.ppd) files. According to the Internet Engineering Task Force (IETF), IPP grew out of a 1996 proposal by Novell to create a printing protocol for use over the Internet. Since then, the system has been developed and has matured into a stable print system for use on a variety of Linux and Unix-like operating platforms.

Overview of Ubuntu Printing Ubuntu’s print filter system is the main engine that enables the printing of many types of documents. The heart of that

186

CHAPTER 8


engine is the GNU GPL version of Aladdin’s Ghostscript interpreter, the gs client. The system administrator’s printer configuration tool is the system-config-printer client.

NOTE Ubuntu’s print system can be used to print to local (attached) or remote (network) printers. If you use a local printer, it is represented by a printer device, such as /dev/lp0 or /dev/usb/lp0 (if you have a USB printer). Local and remote printers use print queues defined in your system’s printer capabilities database, /etc/printcap. A document being printed is known as a print job, and you can view and control your list, or queue, of current print jobs in the spool directory, which is /var/spool/cups. Note that you may control only your print jobs; only the root operator can control print jobs of any user on the system.

To add a printer to your system, you use the system-config-printer client to create, configure, and save the printer’s definition. CUPS maintains its own database of defined printers under the /etc/cups directory in a file named printers.conf. For example, an associated printer defined in /etc/printcap previously might have the following entry in /etc/cups/printers.conf: Info Created by system-config-printer 0.7.x DeviceURI parallel:/dev/lp0 Location HP P135 local printer State Idle Accepting Yes JobSheets none none QuotaPeriod 0 PageLimit 0 KLimit 0

This example shows the definition for the printer named lp, along with its associated device, description, state, and other information. The various possible fields and entries in this file are documented in the printer.conf man page. CUPS uses a print server (daemon) named cupsd, also called a scheduler in the CUPS documentation. The server can be controlled, like other Ubuntu services, by the /etc/init.d/cupsys command or system-config-services client. How the server works on a system is determined by settings in its configuration file, cupsd.conf, found under the /etc/cups directory. CUPS executables are found under the /usr/lib/cups directory. The cupsd.conf man page documents more than 80 different settings for the server, which you can configure to match your system, network, or printing environment. Default CUPS-related files and directories are stored under the /usr/share/cups directory. Logging can be set to seven different levels, with information about access and errors stored in log files under the /var/log/cups directory.

Configuring and Managing Print Services

187

Resource requirements can be tailored through other settings, such as MaxCopies to set the maximum number of copies of a print job by a user, MaxJobs to set a limit on the number of active print jobs, and MaxJobsPerUser to set a limit on the number of active jobs per user. The RIPCache setting (8MB by default) controls the amount of memory used for graphics cache during printing. For example, if you want to limit printing to 20 copies of a document or page at a time and only 10 simultaneous print jobs per user, use settings such as MaxCopies 20 MaxJobsPerUser 10

TIP Don’t forget to restart the CUPS server after making any changes to its configuration file. Changes are activated only when the service is restarted (when the daemon rereads its configuration file). See the “GUI-Based Printer Configuration Quickstart” section later in this chapter.

Configuring and Managing Print Services Your task as a system administrator (or root operator of your workstation) is to properly define local or remote printers and to ensure that printing services are enabled and running properly. Fortunately, Ubuntu includes a graphical print service configuration tool that makes this job easy. You should use these tools to configure printing, as you learn in this section of the chapter. But first, take a moment to read through a quick overview of the configuration process.

GUI-Based Printer Configuration Quickstart Configuring a printer for Ubuntu is easy using the system-config-printer tool, found under System, Administration, Printing. If you’re not sure whether cupsd is running, you can quickly drop to a terminal and use the /etc/init.d/cupsys command with the status keyword like so: $ sudo /etc/init.d/cupsys status

You will see either Status of Common Unix Printing System: cupsd is not running.

8

You can configure printing services using the system-config-printer graphical interface. Most of the detailed information in this chapter refers to the use of the GUI. The overview sections that follow, however, give you a solid foundation in both configuration approaches. You learn the details of these processes in later sections of the chapter.

188

CHAPTER 8


or, if cupsd is running, an acknowledgement such as Status of Common Unix Printing System: cupsd is running.

If cupsd is installed but not running, start the daemon like so: $ sudo /etc/init.d/cups start

to access the GUI select System, Administration, Printing. You then simply follow the prompts to define your printer and add local or remote printing services. You should print a test page before saving your changes. Use the printer configuration client or the File menu’s Print menu item from a GNOME or KDE client.

NOTE The system-config-printer utility is a replacement for gnome-cups-manager, which was previously the default printer configuration tool for Ubuntu. This new utility was actually originally developed for Fedora and has been adopted by Ubuntu.

Managing Printing Services After defining a printer, you can use the command line to view and control your print jobs, or if root, all print jobs and printers on your system. Table 8.1 contains a partial list of CUPS and related printing commands and drivers included with Ubuntu.

TABLE 8.1 Print-Related Commands and Drivers Name

Description

a2ps

Formats text files for PostScript printing

accept

Controls CUPS print job destinations

cancel

Cancels a CUPS print job

disable

Controls CUPS printers

dvi[lj, lj4l, lj2p, lj4]

Converts TeX DVI files to specific PCL format

enable

Controls CUPS printers

encscript

Converts text files to PostScript

escputil

Epson Stylus inkjet printer utility

Most Linux systems use PostScript as the default document format for printing. Ubuntu uses the gs command along with CUPS to manage local and remote print jobs and the type of data transferred during a print job. The gs command is used to translate the document stream into a format accepted by the destination printer (which most likely uses HPCL). You can use the Ghostscript interpreter gs to display its built-in printer devices by using the gs interpreter with its --help command-line option like this: # gs --help

Creating and Configuring Local Printers

189

NOTE Ubuntu includes graphical clients you can use to view many different types of documents. For example, to display PostScript documents (including compressed PostScript documents) or PostScript images, use the gv client. To display Portable Document Format (PDF) documents, you can use gv or the xpdf client.

The gs command outputs many lines of help text on command-line usage and then lists built-in printer and graphics devices. Another way to get this information is to start gs and then use the devicenames == command like this: # gs GPL Ghostscript SVN PRE-RELEASE 8.61 (2007-08-02) Copyright (C) 2007 Artifex Software, Inc.

All rights reserved.

This software comes with NO WARRANTY: see the file PUBLIC for details. GS>devicenames == [/epson /pnggray /lp3000c /epl2050 /pgnm /ljet4d\ /cljet5pr /pbmraw /lips4v /cdj550 /mag16 /laserjet\ /bj200 /dfaxhigh /ibmpro /alc8500 /bmpgray\ /hpdj600 /tiffgray /hpdj310 /pswrite\ ...

Not all the devices are listed in this example.

Aladdin or GNU?

Creating and Configuring Local Printers Creating a local printer for your Ubuntu system can be accomplished in a few easy steps. The cupsd daemon should also be running before you begin (start the daemon manually as shown earlier in this chapter). To launch system-config-printer, go to System, Administration and choose the Printing menu option.

8

At least two versions of Ghostscript are available for Linux. One version is named AFPL Ghostscript, which formerly went by the name Aladdin Ghostscript. This version is licensed under the Aladdin Free Public License, which disallows commercial distribution. The other version is called GNU Ghostscript, which is distributed under the GNU General Public License. For details about the different versions or for answers to questions regarding licensing, see the Ghostscript home page at http://www.cs.wisc.edu/ ~ghost/.

190

CHAPTER 8


Creating the Print Queue The Ubuntu system-config-printer tool walks you through a process to create a new printer. To begin configuration of a local (attached) printer, click the New Printer toolbar button in system-config-printer’s main window.The first screen that appears allows you to choose the type of connection that the printer will use, as shown in Figure 8.1. Select the connection type that is appropriate for you. You can select a number of different connection types, depending on your specific requirements. Normally you will use the LPT#1 option if your printer is connected by a standard Parallel (or what used to be called Centronics) cable. Alternatively, if you are connecting to a printer that has a JetDirect port (most HP network-capable printers fit in this category) then select the appropriate option and enter the network address for the printer.

FIGURE 8.1 Select the appropriate connection method for your printer and enter the relevant details.

Next you need to select the make/manufacturer of the printer that you are setting up, shown in Figure 8.2. Note that you can configure a printer for Ubuntu even if it is not attached to your computer. After you select your printer’s manufacturer, a list of printers from that manufacturer (such as HP, as shown in Figure 8.3) appears. Select your printer from the list, and then click the Forward button. Do not worry if you do not see your printer listed in the selection; it is possible to select a related, although different, printer model and still be able to print to your printer. For example, many HP printers can be used by selecting the DeskJet 500 for monochrome or 500C model for color printing.


191

FIGURE 8.2 Select the make or manufacturer of your printer from this dialog box to help Ubuntu narrow down the driver options.

8

FIGURE 8.3 Select your printer from the list and click the Forward button to continue the configuration.

NOTE You can also browse to http://www.linuxprinting.org/ to find out what drivers to use with your printer or to see a cross-referenced listing of printers supported by each driver. You might also find new and improved drivers for the latest printers on the market.

192

CHAPTER 8


You can experiment to see which printer selection works best for your printer if its model is not listed. You might not be able to use all the features of your printer, but you will be able to set up printing service. Click Next when you have made your choice. Now you can name the printer and give it a description and location as shown in Figure 8.4. The name is important, as this will be what the users see when they print. The description and location are optional, but Ubuntu autofills your location with the hostname of your computer.

FIGURE 8.4 Give your printer a meaningful name, and if you want, a description and location.

If you are happy with the details, click the Apply button to commit your changes to the system. You can see the new printer defined in the system-config-printer main window as shown in Figure 8.5.

Editing Printer Settings You also use the system-config-printer tool to edit the newly defined printers. To edit the printer settings, highlight the printer’s listing in the printer browser window. You can then select specific settings related to that printer by using the tabs that appear in the right side of the dialog box. The Settings dialog is shown in Figure 8.6. The first tab in this dialog enables you to assign a new name for the printer. In this example, the printer has the name OfficeJet. Other tabs in this dialog enable you to change the queue type or queue options (such as whether to print a banner page or set


193

FIGURE 8.5 New printer entries displayed in system-config-printer’s main window.

8

FIGURE 8.6 Edit a printer’s settings by using tabs in system-config-printer.

194

CHAPTER 8


the image area of a page), to select or update the driver, or to choose available print options for the printer (shown in Figure 8.7).

FIGURE 8.7 A printer’s policy options can be changed on the Policies tab of systemconfig-printer. When you finish editing your printer click the Apply button to save your changes and automatically restart the cupsd daemon. This step is extremely important; you have to update the printer settings and restart the cupsd daemon to force it to reread your new settings. Click Quit from the File menu when finished.

Related Ubuntu and Linux Commands The following commands help you manage printing services: . accept—Controls print job access to the CUPS server via the command line . cancel—Cancels a print job from the command line . cancel—Command-line control of print queues . disable—Controls printing from the command line . enable—Command-line control CUPS printers . lp—Command-line control of printers and print service . lpc—Displays status of printers and print service at the console . lpq—Views print queues (pending print jobs) at the console . lprm—Removes print jobs from the print queue via the command line . lpstat—Displays printer and server status . system-config-printer—Ubuntu’s graphical printer configuration tool

Reference

195

Reference . http://www.linuxprinting.org/—Browse here for specific drivers and information about USB and other types of printers. . http://www.hp.com/wwsolutions/linux/products/printing_imaging/index.html—Short but definitive information from HP regarding printing product support under Linux. . http://www.cups.org/—A comprehensive repository of CUPS software, including versions for Ubuntu. . http://www.pwg.org/ipp/—Home page for the Internet Printing Protocol standards. . http://www.linuxprinting.org/cups-doc.html—Information about the Common UNIX Printing System (CUPS). . http://www.cs.wisc.edu/~ghost/—Home page for the Ghostscript interpreter.

8


CHAPTER

9

Games

IN THIS CHAPTER . Linux Gaming . Installing Games for Ubuntu . Playing Windows Games with Cedega . Reference

Whether your boss likes it or not, gaming is a huge part of computing. For any operating system to have true mass market appeal, it must have the ability to play games. From the humble card games that entertain millions during their coffee breaks, to the heavily involved first-person shooters that involve players dotted around the globe, Linux offers a gaming platform that may surprise even the hardened Windows fanboy. In this chapter we’ll explore some of the common games available for you to download and install. We’ll even show you how to get your Windows-based games running under Linux.

Linux Gaming A number of games come as part of Ubuntu, and they are divided into three distinct camps: KDE games, GNOME games, and X games. Our favorites are Planet Penguin Racer and Torc (see Figure 9.1), but there are a few others for you to choose from. The best part, of course, is trying each one and seeing what you think. Many other free games are available across the Web, so go to Google and see what you come up with. However, games for Linux do not stop there—a few versions of popular Windows-based games have been across to the Linux platform, including DOOM 3, Unreal Tournament 2004, and Quake 4. These three popular games have native Linux support and in some cases can run at similar, if not better, speeds than their Windows counterparts. There’s

198

CHAPTER 9

Games

even an emulator available that enables you to play classic adventure games, such as the Secret of Monkey Island, natively under Linux.

FIGURE 9.1 Sliding around corners in the high-speed Torc.

Finally, an implementation of the Wine code called Cedega is optimized especially for games. This uses application interfaces to make Windows games believe they are running on a Windows platform and not a Linux platform. Bear in mind that Wine stands for wine is not an emulator, so do not start thinking of it as such—the community can get quite touchy about it! A major gripe of Linux users has been the difficulty involved in getting modern 3D graphics cards to work. Thankfully, both AMD/ATI and Nvidia support Linux, albeit by using closed-source drivers. This means that Ubuntu does not ship with native 3D drivers activated for either graphics card.

Installing Proprietary Video Drivers Unfortunately, both Nvidia and AMD/ATI still produce proprietary drivers, meaning that the source code is not open and available for developers to look at. This means that it is hard for some Linux distros to include them as part of their standard package manifest. However, Ubuntu have taken the pragmatic approach of including both Nvidia and AMD/ATI drivers within the main Ubuntu distro, albeit disabled by default. That way the end user can, if they so wish, activate those drivers to take advantage of them.

Installing Games in Ubuntu

199

NOTE Don’t think that proprietary drivers are the only way on Linux, as there is a lot of development going into providing totally free and open source drivers for slightly older graphics cards. Ubuntu will automatically select the best “free” driver for your system and allow you to switch the proprietary driver should you want to. Although the open source drivers will provide 3D acceleration, this support doesn’t always extend to the more recent graphics cards.

It’s very easy to activate the proprietary driver if you need to; all you have to do is use the Hardware Drivers Manager found under System, Administration and which is shown in Figure 9.2.

FIGURE 9.2 Use the Hardware Drivers Manager to activate or deactivate the appropriate proprietary graphics driver for your graphics card.

Installing Games in Ubuntu In this section we’ll take a look at how to install some of the more popular games for Ubuntu. Alongside the usual shoot-’em-up games, you’ll also find one or two strategyfocused titles.

9

You will be prompted for your password before you proceed, as you will be setting a system-wide option. Once the Hardware Drivers Manager has opened up, look for the entry that says ATI (or Nvidia) Accelerated Graphics Driver and check the box. Ubuntu will confirm that you want to use the proprietary driver and, if you agree, will automatically download and configure the relevant driver. In order to activate the driver you will need to log out of GNOME by going to System, Log Off. The next time you log in, Ubuntu will automatically switch to the proprietary driver.

200

CHAPTER 9

Games

DOOM 3 The follow-up to the infamous DOOM and DOOM II was released in the second half of 2004 (see Figure 9.3), and it provides a way to run it under Linux. Although it’s almost four years old it is still an impressive game in its own right. You still have to purchase the Windows version because you need some of the files that are on the CDs. The rest of the files are available from id Software at http://zerowing.idsoftware.com/linux/doom.

FIGURE 9.3 Descending into the pits of hell. DOOM 3 is one of the most graphic computer games available.

You can download the file doom3-linux-1.1.1286-demo.x86.run from the id Software FTP server or by using BitTorrent. When that’s finished, open a terminal and change to the directory in which you saved the file. Type the following command_FIRST: $ sudo sh doom3-linux-*.run

This begins the installation of the demo. As with other commercial games, you must agree to an EULA before you can install. Follow the installation procedure. When it finishes, you need to get the Windows CDs ready. The files you need to copy across are the following: . pak000.pk4 . pak001.pk4 . pak002.pk4 . pak003.pk4 . pak004.pk4


201

They must be saved in the /usr/local/games/doom3/base/ directory. After you copy the files, you can start the game by typing doom3 or start the dedicated server for multiplayer games by typing doom3-dedicated.

Unreal Tournament 2004 Unreal Tournament 2004 (or UT2004, as it is affectionately known) from Epic natively supports Linux in both its 32-bit and 64-bit incarnations (see Figure 9.4). Be aware that if you run the 64-bit version, you need to ensure that your graphics drivers are supported under 64-bit mode.

Installation is easy, and there are two ways to do it. You can insert the DVD and mount it, or you can open the DVD in GNOME and double-click the linux-installer.sh icon. When you are asked whether you want to run it or display its contents, click Run in Terminal to launch the graphical installer. As with DOOM 3, you must read and accept the terms of the EULA before you are allowed to install UT2004. You are given the option of where you want to install the software; the default is in your home directory. After you select the destination directory, click Begin Install; UT2004 does the rest.

9

FIGURE 9.4 Unreal Tournament 2004 builds on the classic deathmatch scenario with more enemies and more combatants!

202

CHAPTER 9

Games

The alternative way to access the graphical installer is via the command line. Change directory to /media/cdrom/ and type the following_FIRST: $ sudo sh linux-install.sh

This brings up the installer. Continue through this and, when finished, you should find Unreal Tournament 2004 in /home/username/ut2004. If you want to uninstall UT2004, you can use the uninstall script in the ut2004 directory. Type this_FIRST: $ sudo sh uninstall.sh

After confirmation, Unreal Tournament removes itself from your system.

Quake 4 Being based on the DOOM 3 engine, you could almost expect Quake 4 (seen in Figure 9.5) to ship with a good deal of support for Linux. To get started, you must have the Windows version of the software because you need several files as well as the CD key to be able to play the game. First things first, though. Head on over to http://zerowing.idsoftware.com/ linux/quake4/ to download the required Linux installer (quake4-linux-1.0*.run) by either direct FTP or the more bandwidth-friendly BitTorrent.

FIGURE 9.5 Based on the popular DOOM 3 engine, Quake 4 pits you against the evil Strogg. Get out there and frag ‘em!


203

After you download the file, drop down to a command line and type the following:[[STYLE_FIRST]] $ sudo sh quake4-linux-1.0*.run

Then press Enter. The installer starts up and asks you a couple questions. After you answer these, the installer creates the necessary files and folders. All you need to do is to copy several files from the /quake4/qbase directory on the DVD to /usr/local/bin/quake4/qbase. You can start the game by typing quake4 at a command prompt.

Wolfenstein: Enemy Territory Whereas the earlier Return to Castle Wolfenstein was both single- and multiplayer, the freely available Wolfenstein: Enemy Territory is multiplayer only (see Figure 9.6). Available in Win32 and Linux native versions, you can download it from http://www. SplashDamage.com/. After you download the 260MB file named et-linux-2.55.x86.run, install the game by typing the following: $sudo sh et-linux-2.55.x86.run

9

FIGURE 9.6 Teamwork is the key to victory in this lush but hostile graphical environment.

204

CHAPTER 9

Games

Then accept the defaults. A symlink exists in /usr/local/bin to the script that loads the game.

Battle for Wesnoth Of course, there is more to Linux gaming than just first-person shooters. One of the most popular games currently available for Linux is Battle for Wesnoth (see Figure 9.7), a strategy game much in the vein of Age of Empires. Based in a fantasy land, you are responsible for building armies to wage war against your foes.

FIGURE 9.7 Flex your strategic brain by playing Battle for Wesnoth—a rich and full land of fantasy of adventure Battle for Wesnoth is easy to install with Ubuntu. You need to select the wesnoth package using either synaptic or aptitude. When installed, you launch it from the command line by entering the following: $ wesnoth

Playing Windows Games with Cedega As mentioned earlier, the key to mass-market appeal of an operating system is in the applications available for it. A group of developers saw that the vast majority of the computing world was using Windows-based productivity and gaming software and

Reference

205

decided to develop a way to run this software on Linux, thereby giving Linux users access to this large application base. The developers came up with a program called Wine, which has been updated regularly and forms the basis of the gaming variant called Cedega. This is a commercial product available from developers TransGaming Technologies (http:/ /www.transgaming.com/), so you cannot retrieve it using aptitude. However, Cedega is a popular and up-to-date product with support for recent releases such as Elder Scrolls IV: Oblivion and World of Warcraft. Because the state of Cedega is constantly changing, TransGaming Technologies has a subscription service, which means that you get updates for the code when they are released—ensuring that you are able to enjoy not only the games of today, but also those of tomorrow. So, if you cannot wait for Linux to become more popular with game developers, use Cedega as a stop-gap until they can be persuaded to support Linux directly.

TIP The keys to successful gaming in Linux are to always read the documentation thoroughly, always investigate the Internet resources thoroughly, and always understand your system. Installing games is a great way to learn about your system because the reward of success is so much fun.

Reference . http://www.transgaming.com/—The official TransGaming Technologies website provides details of games that are directly supported under Cedega. . http://www.linuxgames.com/—A good source of up-to-date information about the state of Linux gaming. . http://zerowing.idsoftware.com/linux/doom/—Includes a complete how-to and troubleshooting guide for running DOOM 3 under Linux. . http://www.unrealtournament.com/—The official site of Unreal Tournament.

. http://www.nvidia.com/object/linux.html—Home page for the Nvidia Linux drivers. . http://tinyurl.com/3pm2v—Home page for the ATI Linux drivers (courtesy of tinyurl.com).

9

. http://www.nvnews.net/vbulletin/forumdisplay.php?f=14—The Official Nvidia Linux driver support forum.


PART III System Administration IN THIS PART CHAPTER 10

Managing Users

CHAPTER 11

Automating Tasks

CHAPTER 12

system-Monitoring Tools

CHAPTER 13

Backing Up

CHAPTER 14

Networking

CHAPTER 15



CHAPTER

10

Managing Users

IN THIS CHAPTER . User Accounts . Managing Groups . Managing Users . Managing Passwords . Granting System Administrator Privileges to Regular Users

If it weren’t for users then system administrators would

. Disk Quotas

have a quiet life! However, it’s impossible for you have a system with absolutely no users, so it is important that you learn how to effectively manage and administer your users as they work with your system. Whether you are creating a single user account or modifying a group that holds hundreds of user accounts, the fundamentals of user administration are the same.

. Reference

User management and administration includes looking after allocating and managing home directories, putting in place good password policies and applying an effective security policy including disk quotas and file and directory access permissions. We will take a look at all of these areas within this chapter, as well as taking a look at the different types of user that you are likely to find on an average Linux system.

User Accounts You can normally findthree types of users on all Linux systems: the super user, the day to day user and the system user. Each type of user is essential to the smooth running of your system and learning the differences between the three is essential if you are to work efficiently and safely within your Linux environment. All users who access your system must have accounts on the system itself. Ubuntu uses the /etc/passwd file to store information on the user accounts that are present on the system. All users, regardless of their type, have a one line entry in this file which contains their username (typically used for logging in to the system), a password field (which

210

CHAPTER 10

Managing Users

contains an x to denote that a password is present), a User ID (commonly referred to as the UID) and a Group ID (commonly referred to as the GID). The last two fields show the location of the home directory (usually /home/username) and the default shell for the user (/bin/bash is the default for new users).

NOTE Just because the password field contains an x doesn’t mean that this is your password! All passwords are actually encrypted and stored in /etc/shadow for safe keeping. Ubuntu automatically refers to this file whenever a password is required.

In keeping with other UNIX-based operating systems, Linux and Ubuntu make use of the established UNIX file ownership and permission system. All files (which can include directories and devices) can be assigned one or more of read, write and/or execute permissions. These three ’flags’ can also be assigned to the owner of the file, a member of a group or anyone on the system. The security for a file is drawn from these permissions and also file ownership. As the system administrator (more commonly referred to as the super user) it is your responsibility to manage these settings effectively and ensure that the users have proper UIDs and GIDS. Perhaps most importantly you will need to lock away sensitive files from users who should not have access to them, through file permissions.

The Super User/Root User No matter how many system administrators there are for a system, there can ever only be one super user account. The super user account, more commonly referred to as the root user, has total and complete control over all aspects of the system. They can go anywhere in the filesystem, grant and revoke access to files and directories, and can carry out any operation on the system, including destroying it if they so wish. The root user is unique in that it has a UID of 0 and GID of 0. As you can probably guess by now, the root user has supreme power over your system. With this in mind, it’s important that you do not work as root all the time as you may inadvertently cause serious damage to your system, perhaps even making it totally unusable. Instead, you should rely on root only when you need to make specific changes to your system that require root privileges. As soon as you’ve finished your work you can switch back to your normal user account to carry on working. Within Ubuntu you execute a command with root privileges by way of the sudo command like so: $sudo apt-get update

You will be prompted for your password so you should enter this. Ubuntu will then carry out the command (in this case updating information about available software) as if you were running it as root.

User Accounts

211

The Root User If you’ve used other Linux distros then you are likely to be a little puzzled by the use of the sudo command. In short, Ubuntu allows the first user on the system access to full root privileges through the sudo command. It also disables the root account so no one can actually login with the username root. In other Linux distros you would change to the root user by issuing the command su followed by the root password. This will land you at the root prompt, which is shown as a pound sign (#). From here you are able to execute any com-

mand you wish. To get to a root prompt in Ubuntu you need to execute the command sudo -i which, after you enter your password, will give you the prompt so familiar to other Linux distros. When you’ve finished working as root just type exit and hit Enter to get back to a normal user prompt ($).

A regular user is someone who logs on to the system to make use of it for nonadministrative tasks such as word processing or email. These users do not need to make systemwide changes or manage other users. However, they might want to be able to change settings specific to them (for instance, a desktop background). Of course, depending on how draconian the root user is, regular users might not even be able to do that! The super user grants privileges to regular users by means of file and directory permissions (as covered in Chapter 4, “Command Line Quickstart”). For example, if the super user does not want you to change your settings in ~/.profile (the ~ is a shell shortcut representing your home directory), root can alter the permissions so that you may read from, but not write to, that file.

CAUTION Because of the potential for making a catastrophic error as the super user (using the command rm -rf /* is the classic example, but do not ever try it!), always use your system as a regular user and become root only temporarily to do sysadmin duties. While you are on a multiuser system, consider this advice an absolute rule; if root were to delete the wrong file or kill the wrong process, the results could be disastrous for the business. On your home system, you can do as you please, and running as root makes many things easier, but less safe. In any setting, however, the risks of running as root are significant and we cannot stress how important it is to be careful when working as root.

10 The third type of user is the system user. The system user is not a person, but rather an administrative account that the system uses during day-to-day running of various services. For example, the system user named apache owns the apache web server and all the associated files. Only itself and root can have access to these files—no one else can access or make changes to these files. System users do not have a home directory or password, nor do they permit access to the system through a login prompt.

212

CHAPTER 10

Managing Users

You will find a list of all the users on a system in the /etc/passwd file. Ubuntu refers to these users as the standard users because they are found on every Ubuntu computer as the default set of system (or logical) users provided during the initial installation. This “standard” set differs among Linux distributions.

User IDs and Group IDs A computer is, by its very nature, a number-oriented machine. It identifies users and groups by numbers known as the user ID (UID) and group ID (GID). The alphabetic names display on your screen just for the your ease of use. As previously mentioned, the root user is UID 0. Numbers from 1 through 499 and 65,534 are the system, or logical, users. Regular users have UIDs beginning with 1,000; Ubuntu assigns them sequentially beginning with this number. With only a few exceptions, the GID is the same as the UID. Ubuntu creates a private GID for every UID of 1,000 and greater. The system administrator can add other users to a GID or create a totally new group and add users to it. Unlike Windows NT and some UNIX variants, a group cannot be a member of another group in Linux.

File Permissions As you learned in Chapter 4, permissions are of three types: read, write, and execute (r, w, x). For any file or directory, permissions can be established in three categories: user, group, and global. In this section, we focus on group permissions, but there is a highlight of the commands used to change the group, user, or access permissions of a file or directory: Seth . chgrp—Changes the group ownership of a file or directory . chown—Changes the owner of a file or directory . chmod—Changes the access permissions of a file or directory These commands, which modify file ownerships and permissions, can be used to model organizational structures and permissions in the real world onto your Ubuntu system (see the next section, “Managing Groups”). For example, a human resources department can share health-benefit memos to all company employees by making the files readable (but not writable) by anyone in an accessible directory. On the other hand, programmers in the company’s research and development section, although able to access each other’s source code files, would not have read or write access to HR pay-scale or personnel files (and certainly would not want HR or marketing poking around R&D). These commands are used to easily manage group and file ownerships and permissions from the command line. It is essential that you know these commands because sometimes you might have only a command-line interface to work with; perhaps some idiot system administrator set incorrect permissions on X11, for example, rendering the system incapable of working with a graphical interface.

Managing Groups

213

User Stereotypes As is the case in many professions, exaggerated characterizations (stereotypes or caricatures) have emerged for users and system administrators. Many stereotypes contain elements of truth mixed with generous amounts of hyperbole and humor and serve to assist us in understanding the characteristics of and differences in the stereotyped subjects. The stereotypes of the “luser” and the “BOFH” (users and administrators, respectively) also serve as cautionary tales describing what behavior is acceptable and unacceptable in the computing community. Understanding these stereotypes allows you to better define the appropriate and inappropriate roles of system administrators, users, and others. You can find a good reference for both at Wikipedia: http://en.wikipedia.org/wiki/BOFH and http://en.wikipedia. org/wiki/Luser.

Managing Groups Groups can make managing users a lot easier. Instead of having to assign individual permissions to every user, you can use groups to grant or revoke permissions to a large number of users quickly and easily. Setting group permissions allows you to set up workspaces for collaborative working and to control what devices can be used, such as external drives or DVD writers. This approach also represents a secure method of limiting access to system resources to only those users who need them. As an example, the sysadmin could put the users andrew, paul, michael, bernice, mark, and john in a new group named unleashed. Those users could each create files intended for their group work and chgrp those files to unleashed. Now, everyone in the unleashed group—but no one else except root—can work with those files. The sysadmin would probably create a directory owned by that group so that its members could have an easily accessed place to store those files. The sysadmin could also add other users such as bernice and ildiko to the group and remove existing users when their part of the work is done. The sysadmin could make the user andrew the group administrator so that andrew could decide how group membership should be changed. You could also put restrictions on the DVD writer so that only andrew could burn DVDs, thus protecting sensitive material from falling into the wrong hands.

Here is a partial list of a sample /etc/group file: $ sudo cat /etc/group

10

Different UNIX operating systems implement the group concept in various ways. Ubuntu uses a scheme called UPG, the user private group, in which all users are assigned to a group with their own name by default. (The user’s username and group name are identical.) All the groups are listed in /etc/group file.

214

CHAPTER 10

Managing Users

root:x:0: daemon:x:1: bin:x:2: sys:x:3: mail:x:8: news:x:9: ... gdm:x:111: andrew:x:1000: admin:x:112:andrew

This example contains a number of groups, mostly for services (mail, news, and so on) and devices (floppy, disk, and so on). As previously mentioned, the system services groups enable those services to have ownership and control of their files. For example, adding postfix to the mail group, as shown previously, enables the postfix application to access mail’s files in the manner that mail would decide for group access to its file. Adding a regular user to a device’s group permits the regular user to use the device with permissions granted by the group owner. Adding user andrew to the group cdrom, for example, would allow andrew to use the optical drive device. You learn how to add and remove users from groups in the next section.

Group Management Tools Ubuntu provides several command-line tools for managing groups, but also provides graphical tools for such. Many experienced sysadmins prefer the command-line tools because they are quick and easy to use and can be included in scripts if the sysadmin desires to script a repetitive task. Here are the most commonly used group management command-line tools: . groupadd—This command creates and adds a new group. . groupdel—This command removes an existing group. . groupmod—This command creates a group name or GIDs but doesn’t add or delete members from a group. . gpasswd—This command creates a group password. Every group can have a group password and an administrator. Use the -A argument to assign a user as group administrator. . useradd -G—The -G argument adds a user to a group during the initial user creation. (More arguments are used to create a user.) . usermod -G—This command allows you to add a user to a group so long as the user is not logged in at the time. . grpck—A command for checking the /etc/group file for typos.

Managing Groups

215

As an example, there is a DVD-RW device (/dev/scd0) on our computer that the sysadmin wants a regular user named john to have access to. To grant john that access, we would follow these steps: 1. Add a new group with the groupadd command: # groupadd dvdrw

2. Change the group ownership of the device to the new group with the chgrp command: # chgrp dvdrw /dev/scd0

3. Add the approved user to the group with the usermod command: # usermod -G dvdrw

john

4. Make user john the group administrator with the gpasswd command so that she can add new users to the group: # gpasswd -A john

Now, the user john has permission to use the DVD-RW drive, as would anyone else added to the group by the super user or john because she is now also the group administrator and can add users to the group. The sysadmin can also use the graphical interface that Ubuntu provides, as shown in Figure 10.1. It is accessed under System, Administration as the Users and Groups entry.

10

FIGURE 10.1 Use the manage groups option to allow you to assign users to groups.

216

CHAPTER 10

Managing Users

Note that the full set of group commands and options are not available from the graphical interface, limiting the usefulness of the GUI to a subset of the most frequently used commands. You learn more about using the Ubuntu User Manager GUI in the next section of this chapter.

Managing Users We have mentioned users previously, but in this section we look at how the sysadmin can actually manage the users. Users must be created, assigned a UID, provided a home directory, provided an initial set of files for their home directory, and assigned to groups so that they can use the system resources securely and efficiently. The system administrator might elect to restrict a user’s access not only to files, but to the amount of disk space they use, too.

User Management Tools Ubuntu provides several command-line tools for managing users, but also provides graphical tools too. Many experienced sysadmins prefer the command-line tools because they are quick and easy to use and they can be included in scripts if the sysadmin prefers to script a repetitive task. Here are the most frequently used commands used to manage users: . useradd—This command is used to add a new user account to the system. Its options permit the sysadmin to specify the user’s home directory and initial group or to create the user with the default home directory and group assignments. . useradd -D—This command sets the system defaults for creating the user’s home directory, account expiration date, default group, and command shell. See the specific options in man useradd. Used without any arguments, it displays the defaults for the system. The default set of files for a user are found in /etc/skel.

NOTE The set of files initially used to populate a new user’s home directory are kept in /etc/skel. This is convenient for the system administrator because any special files, links, or directories that need to be universally applied can be placed in /etc/skel and will be duplicated automatically with appropriate permissions for each new user. $ ls -al /etc/skel total 20

drwxr-xr-x

2 root root 4096 2007-08-09 00:59 .

drwxr-xr-x 111 root root 4096 2007-08-20 09:54 ..

Managing Users

-rw-r--r--

1 root root

-rw-r--r--

1 root root 2298 2007-05-17 12:59 .bashrc

lrwxrwxrwx

1 root root

217

220 2007-05-17 12:59 .bash_logout

26 2007-08-13 19:42 Examples \

-> /usr/share/example-content

-rw-r--r--

1 root root

566 2007-05-17 12:59 .profile

Each line provides the file permissions, the number of files housed under that file or directory name, the file owner, the file group, the file size, the creation date, and the filename. As you can see, root owns every file here, but the adduser command (a symbolic link to the actual command named useradd) copies everything in /etc/skel to the new home directory and resets file ownership and permissions to the new user. Certain user files might exist that the system administrator doesn’t want the user to change; the permissions for those files in /home/username can be reset so that the user can read them but can’t write to them.

. userdel—This command completely removes a user’s account (thereby eliminating that user’s home directory and all files it contains). . passwd—This command updates the “authentication tokens” used by the password management system.

TIP To lock a user out of his account, use the following command: # passwd -l username

This prepends an ! (exclamation point, also called a bang) to the user’s encrypted password; the command to reverse the process uses the -u option. This is a more elegant and preferred solution to the problem than the traditional UNIX way of manually editing the file.

10 . usermod—This command changes several user attributes. The most commonly used arguments are -s to change the shell and -u to change the UID. No changes can be made while the user is logged in or running a process.

218

CHAPTER 10

Managing Users

. chsh—This command changes the user’s default shell. For Ubuntu, the default shell is /bin/bash, known as the Bash, or Bourne Again Shell.

Adding New Users The command-line approach to adding this user is actually quite simple and can be accomplished on a single line. In the example shown here, the sysadmin uses the useradd command to add the new user bernice. The command adduser (a variant found on some UNIX systems) is a symbolic link to useradd, so both commands work the same. In this example, we use the -p option to set the password the user requested; we use the -s to set his special shell, and the -u option to specify her UID. (If we create a user with the default settings, we do not need to use these options.) All we want to do can be accomplished on one line: # useradd bernice -p sTitcher -s /bin/zsh -u 1002

The sysadmin can also use the graphical interface that Ubuntu provides, as shown in Figure 10.2. It is accessed as the Users and Groups item from the Administration menu. Here, the sysadmin is adding a new user to the system where user bernice uses the bash command shell.

FIGURE 10.2 Adding a new user is simple. The GUI provides a more complete set of commands for user management than for group management.

Managing Users

219

These are the steps we used to add the same account as shown in the preceding command, but using the graphical User Manager interface: 1. Launch the Ubuntu User Manager graphical interface by clicking on the Users and Groups menu item found in the System Settings menu. 2. Click the Add User button to bring up the Add User dialog window. 3. Fill in the form with the appropriate information as requested, ensuring you create a good password. 4. Click the Advanced tab and open the drop-down Shell menu to select the bash shell. 5. Using the arrows found in the UID dialog, increment the UID to 1413. 6. Click OK to save the settings. Note that the user is being manually assigned the UID of 1413 because that is her UID on another system machine that will be connected to this machine. Because the system only knows her as 1001 and not as bernice, the two machines would not recognize bernice as the same user if two different UIDs were assigned.

NOTE A Linux username can be any alphanumeric combination that does not begin with a special character reserved for shell script use (see Chapter 11, “Automating Tasks,” for disallowed characters, mostly punctuation characters). In Chapter 4, we told you that usernames are typically the user’s first name plus the first initial of her last name. That is a common practice on larger systems with many users because it makes life simpler for the sysadmin, but is neither a rule nor a requirement.

Monitoring User Activity on the System Monitoring user activity is part of the sysadmin’s duties and an essential task in tracking how system resources are being used. The w command tells the sysadmin who is logged in, where he is logged in, and what he is doing. No one can hide from the super user. The w command can be followed by a specific user’s name to show only that user. The ac command provides information about the total connect time of a user measured in hours. It accesses the /var/log/wtmp file for the source of its information. The ac command proves most useful in shell scripts to generate reports on operating system usage for management review. Note that in order to use the ac command you will have to install the acct package using either synaptic or apt-get.

10

TIP Interestingly, a phenomenon known as timewarp can occur in which an entry in the wtmp files jumps back into the past and ac shows unusual amounts of time accounted for users. Although this can be attributed to some innocuous factors having to do with the system clock, it is worthy of investigation by the sysadmin because it can also be the result of a security breach.

220

CHAPTER 10

Managing Users

The last command searches through the /var/log/wtmp file and lists all the users logged in and out since that file was first created. The user reboot exists so that you might know who has logged in since the last reboot. A companion to last is the command lastb, which shows all failed, or bad, logins. It is useful for determining whether a legitimate user is having trouble or a hacker is attempting access.

NOTE The accounting system on your computer keeps track of usage user statistics and is kept in the current /var/log/wtmp file. That file is managed by the init and login processes. If you want to explore the depths of the accounting system, use the GNU info system: info accounting.

Managing Passwords Passwords are an integral part of Linux security, and they are the most visible part to the user. In this section, you learn how to establish a minimal password policy for your system, where the passwords are stored, and how to manage passwords for your users.

System Password Policy An effective password policy is a fundamental part of a good system administration plan. The policy should cover the following: . Allowed and forbidden passwords . Frequency of mandated password changes . Retrieval or replacement of lost or forgotten passwords . Password handling by users

The Password File The password file is /etc/passwd, and it is the database file for all users on the system. The format of each line is as follows: username:password:uid:gid:gecos:homedir:shell

The fields are self-explanatory except for the gecos field. This field is for miscellaneous information about the user, such as the users’ full name, his office location, office and home phone numbers, and possibly a brief text message. For security and privacy reasons, this field is little used nowadays, but the system administrator should be aware of its existence because the gecos field is used by traditional UNIX programs such as finger and mail. For that reason, it is commonly referred to as the finger information field. The data in this field will be comma delimited; the gecos field can be changed with the cgfn (change finger) command.

Managing Passwords

221

Note that a colon separates all fields in the /etc/passwd file. If no information is available for a field, that field is empty, but all the colons remain. If an asterisk appears in the password field, that user will not be permitted to log on. Why does this feature exist? So that a user can be easily disabled and (possibly) reinstated later without having to be created all over again. The system administrator manually edits this field, which is the traditional UNIX way of accomplishing this task. Ubuntu provides improved functionality with the passwd -l command mentioned earlier. Several services run as pseudo-users, usually with root permissions. These are the system, or logical, users mentioned previously. You would not want these accounts available for general login for security reasons, so they are assigned /sbin/nologin as their shell, which prohibits any logins from those “users.” A list of /etc/passwd reveals the following: $ cat /etc/passwd root:x:0:0:root:/root:/bin/bash daemon:x:1:1:daemon:/usr/sbin:/bin/sh bin:x:2:2:bin:/bin:/bin/sh sys:x:3:3:sys:/dev:/bin/sh sync:x:4:65534:sync:/bin:/bin/sync games:x:5:60:games:/usr/games:/bin/sh man:x:6:12:man:/var/cache/man:/bin/sh lp:x:7:7:lp:/var/spool/lpd:/bin/sh mail:x:8:8:mail:/var/mail:/bin/sh news:x:9:9:news:/var/spool/news:/bin/sh ... hplip:x:106:7:HPLIP system user,,,:/var/run/hplip:/bin/false andrew:x:1000:1000:Andrew Hudson,17,01225112233,01225445566:\ /home/andrew:/bin/bash beagleindex:x:107:65534::/var/cache/beagle:/bin/false

Note that all the password fields do not show a password, but contain an x because they are shadow passwords, a useful security enhancement to Linux, discussed in the following section.

Shadow Passwords

Special versions of the traditional password and login programs must be used to enable shadow passwords. Shadow passwords are automatically enabled during the installation phase of the operating system on Ubuntu systems.

10

It is considered a security risk to keep any password in /etc/passwd because anyone with read access can run a cracking program on the file and obtain the passwords with little trouble. To avoid this risk, shadow passwords are used so that only an x appears in the password field of /etc/passwd; the real passwords are kept in /etc/shadow, a file that can only be read by the sysadmin (and PAM, the Pluggable Authentication Modules authentication manager; see the “PAM Explained” sidebar for an explanation of PAM).

222

CHAPTER 10

Managing Users

Let’s examine a listing of the shadow companion to /etc/passwd, the /etc/shadow file: # cat /etc/shadow root:*:13299:0:99999:7::: daemon:*:13299:0:99999:7::: bin:*:13299:0:99999:7::: ... haldaemon:!:13299:0:99999:7::: gdm:!:13299:0:99999:7::: hplip:!:13299:0:99999:7::: andrew:$1$6LT/qkWL$sPJPp.2QkpC8JPtpRk906/:13299:0:99999:7::: beagleindex:!:13299:0:99999:7:::

The fields are separated by colons and are, in order: . The user’s login name. . The encrypted password for the user. . The day of which the last password change occurred, measured in the number of days since January 1, 1970. This date is known in UNIX circles as the epoch. Just so you know, the billionth second since the epoch occurred was in September 2001; that was the UNIX version of Y2K—as with the real Y2K, nothing much happened. . The number of days before the password can be changed (prevents changing a password and then changing it back to the old password right away—a dangerous security practice). . The number of days after which the password must be changed. This can be set to force the change of a newly issued password known to the system administrator. . The number of days before the password expiration that the user is warned it will expire. . The number of days after the password expires that the account is disabled (for security). . Similar to the password change date, although this is the number of days since January 1, 1970 that the account has been disabled. . The final field is a “reserved” field and is not currently allocated for any use. Note that password expiration dates and warnings are disabled by default in Ubuntu. These features are not used on home systems and usually not used for small offices. It is the sysadmin’s responsibility to establish and enforce password expiration policies. The permissions on the /etc/shadow file should be set so that it is not writable or readable by regular users: The permissions should be 600.

Managing Passwords

223

PAM Explained Pluggable Authentication Modules (PAM) is a system of libraries that handle the tasks of authentication on your computer. It uses four management groups: account management, authentication management, password management, and session management. This allows the system administrator to choose how individual applications will authenticate users. Ubuntu has preinstalled and preconfigured all the necessary PAM files for you. The configuration files in Ubuntu are found in /etc/pam.d. These files are named for the service they control, and the format is as follows: type control module-path module-arguments

The type field is the management group that the rule corresponds to. The control field tells PAM what to do if authentication fails. The final two items deal with the PAM module used and any arguments it needs. Programs that use PAM typically come packaged with appropriate entries for the /etc/pam.d directory. To achieve greater security, the system administrator can modify the default entries. Misconfiguration can have unpredictable results, so back up the configuration files before you modify them. The defaults provided by Ubuntu are adequate for home and small office users. An example of a PAM configuration file with the formatted entries as described previously is shown next. Here are the contents of /etc/pam.d/gdm: #%PAM-1.0 auth

requisite

pam_nologin.so

auth

required

pam_env.so readenv=1

auth

required

pam_env.so readenv=1 envfile=/etc/default/locale

@include common-account session required

pam_limits.so

@include common-session @include common-password

Amusingly, even the PAM documents state that you do not really need (or want) to know a lot about PAM to use it effectively. You will likely need only the PAM system administrator’s guide. You can find it at http:/ /www.kernel.org/pub/linux/libs/pam/Linux-PAM-html/Linux-PAM_SAG.html

Selecting appropriate user passwords is always an exercise in trade-offs. A password such as password (do not laugh, it has been used too often before in the real world with devastating consequences) is just too easy to guess by an intruder as are simple words or number combinations (a street address, for example). A security auditor for one of my former

10

Managing Password Security for Users

224

CHAPTER 10

Managing Users

employers used to take the cover sheet from an employee’s personnel file (which contained the usual personal information of name, address, birth date, and so on) and then attempt to log on to a terminal with passwords constructed from that information— and often succeeded in logging on. On the other hand, a password such as 2a56u’”F($84u&#^Hiu44Ik%$([#EJD is sure to present great difficulty to an intruder (or an auditor). However, that password is so difficult to remember that it would be likely that the password owner would write that password down and tape it next to her keyboard. I worked for a company in which the entry code to one of the buildings was etched into the cigarette bin outside the door; we never found out who did this, but quickly changed the security number. This is but one of many examples of poor security in the field. The sysadmin has control, with settings in the /etc/shadow file, over how often the password must be changed. The settings can be changed using a text editor, the change command, or a configuration tool such as Ubuntu’s User Manager, as shown previously in Figure 10.1. Click on the Password Info tab under that particular user’s Properties to set individual password policies.

Changing Passwords in a Batch On a large system, there might be times when a large number of users and their passwords need some attention. The super user can change passwords in a batch by using the chpasswd command, which accepts input as a name/password pair per line in the following form: $ sudo chpasswd username:password

Passwords can be changed en masse by redirecting a list of name and password pairs to the command. An appropriate shell script can be constructed with the information gleaned from Chapter 11. However, Ubuntu also provides the newusers command to add users in a batch from a text file. This command also allows a user to be added to a group, and a new directory can be added for the user, too.

Granting System Administrator Privileges to Regular Users On occasion, it is necessary for regular users to run a command as if they were the root user. They usually do not need these powers, but they might on occasion—for example, to temporarily access certain devices or run a command for testing purposes. There are two ways to run commands with root privileges: The first is useful if you are the super user and the user; the second if you are not the regular user (as on a large, multiuser network).

Granting System Administrator Privileges to Regular Users

225

Temporarily Changing User Identity with the su Command What if you are also root but are logged on as a regular user because you are performing nonadministrative tasks and you need to do something that only the super user can do? The su command is available for this purpose.

NOTE A popular misconception is that the su command is short for super user; it just means substitute user. An important but often overlooked distinction is that between su and su -. In the former instance, you become that user but keep your own environmental variables (such as paths). In the latter, you inherit the environment of that user. This is most noticeable when you use su to become the super user, root. Without appending the -, you do not inherit the path variable that includes /bin or /sbin, so you must always enter the full path to those commands when you just su to root. Don’t forget that on a standard Ubuntu system, the first created user is classed as root, whilst the true root account is disabled. To enable the root account, enter the command sudo passwd at the command line and enter your password and a new root password. Once this has been completed then you can su to root.

Because almost all Linux file system security revolves around file permissions, it can be useful to occasionally become a different user with permission to access files belonging to other users or groups or to access special files (such as the communications port /dev/ttyS0 when using a modem or the sound device /dev/audio when playing a game). You can use the su command to temporarily switch to another user identity, and then switch back.

TIP It is never a good idea to use an Internet Relay Chat (IRC) client as the root user, and you might not want to run it using your regular user account. Simply create a special new user just for IRC and su to that user in a terminal widow to launch your IRC client.

The syntax for the su command is as follows: $ su option username arguments

The man page for su gives more details, but some highlights of the su command are here: -c, --command COMMAND

10

The su command spawns a new shell, changing both the UID and GID of the existing user and automatically changes the environmental variables associated with that user, known as inheriting the environment. Refer to Chapter 4 for more information on environmental variables.

CHAPTER 10

226

Managing Users

pass a single COMMAND to the shell with -c -m, --preserve-environment do not reset environment variables -l

a full login simulation for the substituted user, the same as specifying the dash alone

You can invoke the su command in different ways that yield diverse results. By using su alone, you can become root, but you keep your regular user environment. This can be verified by using the printenv command before and after the change. Note that the working directory (you can execute pwd as a command line to print the current working directory) has not changed. By executing the following, you become root and inherit root’s environment: $ su -

By executing the following, you become that user and inherit the super user’s environment—a pretty handy tool. (Remember: Inheriting the environment comes from using the dash in the command; omit that, and you keep your “old” environment.) To become another user, specify a different user’s name on the command line: $ su - other_user

When leaving an identity to return to your usual user identity, use the exit command. For example, while logged on as a regular user, $ su - root

the system prompts for a password: Password:

When the password is entered correctly, the root user’s prompt appears: #

To return to the regular user’s identity, just type # exit

This takes you to the regular user’s prompt: $

If you need to allow other users access to certain commands with root privileges, you must give them the root password so that they can use su—that definitely is not a secure solution. The next section describes a more flexible and secure method of allowing normal users to perform selected root tasks.

Granting System Administrator Privileges to Regular Users

227

Granting Root Privileges on Occasion—The sudo Command It is often necessary to delegate some of the authority that root wields on a system. For a large system, this makes sense because no single individual will always be available to perform super user functions. The problem is that UNIX permissions come with an all-ornothing authority. Enter sudo, an application that permits the assignment of one, several, or all of the root-only system commands.

NOTE As mentioned earlier, the sudo command is pervasive in Ubuntu, because it is used by default. If you want to get to a root shell, and thereby removing the need to type sudo for every command, just enter sudo -i to get the root prompt. To return to a normal user prompt, enter exit and press Return.

After it is configured, using sudo is simple. An authorized user merely precedes the super user authority-needed command with the sudo command, like so: $ sudo command

After getting the user’s password, sudo checks the /etc/sudoers file to see whether that user is authorized to execute that particular command; if so, sudo generates a “ticket” for a specific length of time that authorizes the use of that command. The user is then prompted for his password (to preserve accountability and provide some measure of security), and then the command is run as if root had issued it. During the life of the ticket, the command can be used again without a password prompt. If an unauthorized user attempts to execute a sudo command, a record of the unauthorized attempt is kept in the system log and a mail message is sent to the super user. Three man pages are associated with sudo: sudo, sudoers, and visudo. The first covers the command itself, the second the format of the /etc/sudoers file, and the third the use of the special editor for /etc/sudoers. You should use the special editing command because it checks the file for parse errors and locks the file to prevent others from editing it at the same time. The visudo command uses the vi editor, so you might need a quick review of the vi editing commands found in Chapter 4, “Command Line Quickstart,” in the section “Working with vi.” You begin the editing by executing the visudo command with this: $ sudo visudo

# /etc/sudoers # # This file MUST be edited with the ‘visudo’ command as root.

10

The default /etc/sudoers file looks like this:

228

CHAPTER 10

Managing Users

# # See the man page for details on how to write a sudoers file. # Host alias specification # User alias specification # Cmnd alias specification # Defaults Defaults

!lecture,tty_tickets,!fqdn

# User privilege specification root ALL=(ALL) ALL # Members of the admin group may gain root privileges %admin ALL=(ALL) ALL

The basic format of a sudoers line in the file is as follows: user host_computer=command

The user can be an individual user or a group (prepended by a % to identify the name as a group). The host_computer is normally ALL for all hosts on the network and localhost for the local machine, but the host computer can be referenced as a subnet or any specific host. The command in the sudoers line can be ALL, a list of specific commands, or a restriction on specific commands (formed by prepending a ! to the command). A number of options are available for use with the sudoers line, and aliases can be used to simplify the assignment of privileges. Again, the sudoers man page will give the details, but here are a few examples: If we uncomment the line # %wheel

ALL=(ALL)

NOPASSWD: ALL

any user we add to the wheel group can execute any command without a password. Suppose that we want to give a user john permission across the network to be able to add users with the graphical interface. We would add the line john ALL=/users-admin

or perhaps grant permission only on her local computer: john 192.168.1.87=/usr/bin/users-admin

If we want to give the editor group systemwide permission with no password required to delete files %editors ALL=NOPASSWD: /bin/rm

Disk Quotas

229

If we want to give every user permission with no password required to mount the CD drive on the localhost ALL localhost=NOPASSWD:/sbin/mount /dev/scd0 /mnt/cdrom /sbin/umount /mnt/cdrom

It is also possible to use wildcards in the construction of the sudoers file. Aliases can be used, too, to make it easier to define users and groups. Although the man page for sudoers contains some examples, http://www.komar.org/pres/sudo/toc.html provides illustrative notes and comments of sudo use at a large aerospace company. The sudo home page at http://www.sudo.ws/ is also a useful resource for additional explanations and examples. The following command presents users with a list of the commands they are entitled to use: $ sudo -l

Adding Extra Sudo Users As mentioned earlier, by default Ubuntu grants the first created user full root access through the sudo command. If you need to add this capability for other users, then you can do this easily by adding each user to the admin group or by using the User Manager tool to allow them to Administer the System, which can be found in the User Privileges tab when you edit the properties for a user.

Disk Quotas On large systems with many users, you need to control the amount of disk space a user has access to. Disk quotas are designed specifically for this purpose. Quotas, managed per each partition, can be set for both individual users as well as groups; quotas for the group need not be as large as the aggregate quotas for the individuals in the groups. When files are created, both a user and a group own them; ownership of the files is always part of the metadata about the files. This makes quotas based on both users and groups easy to manage.

NOTE

To manage disk quotas, you must have the quota and quotatool packages installed on your system. Quota management with Ubuntu is not enabled by default and has traditionally been enabled and configured manually by system administrators. Sysadmins use the family of quota commands, such as quotacheck to initialize the quota database files, edquota to set and edit user quotas, setquota to configure disk quotas, and quotaon or

10

Disk quota management is never done on a home system and rarely, if ever, done on a small office system.

230

CHAPTER 10

Managing Users

quotaoff to control the service. (Other utilities include warnquota for automatically sending mail to users over their disk space usage limit.)

Implementing Quotas To reiterate, quotas might not be enabled by default, even if the quota software package is installed on your system. When quotas are installed and enabled, you can see which partitions have either user quotas, group quotas, or both by looking at the fourth field in the /etc/fstab file. For example, one line in /etc/fstab shows that quotas are enabled for the /home partition: /dev/hda5

/home

ext3

defaults,usrquota,grpquota 1 1

The root of the partition with quotas enabled will have the files quota.user or quota.group in them (or both files, if both types of quotas are enabled), and the files will contain the actual quotas. The permissions of these files should be 600 so that users cannot read or write to them. (Otherwise, users would change them to allow ample space for their music files and Internet art collections.) To initialize disk quotas, the partitions must be remounted. This is easily accomplished with the following: # mount -o ro,remount partition_to_be_remounted mount_point

The underlying console tools (complete with man pages) are . quotaon, quotaoff—Toggles quotas on a partition . repquota—A summary status report on users and groups . quotacheck—Updates the status of quotas (compares new and old tables of disk usage); it is run after fsck . edquota—A basic quota management command

Manually Configuring Quotas Manual configuration of quotas involves changing entries in your system’s file system table, /etc/fstab, to add the usrquota mount option to the desired portion of your file system. As an example in a simple file system, quota management can be enabled like this: LABEL=/

/

ext3

defaults,usrquota

1 1

Group-level quotas can also be enabled by using the grpquota option. As the root operator, you must then create a file (using our example of creating user quotas) named quota.user in the designated portion of the file system, like so: # touch /quota.user

You should then turn on the use of quotas using the quotaon command: # quotaon -av

Disk Quotas

231

You can then edit user quotas with the edquota command to set hard and soft limits on file system use. The default system editor (vi unless you change your EDITOR environment variable) will be launched when editing a user’s quota. Any user can find out what their quotas are with $ quota -v

NOTE Ubuntu does not support any graphical tools that enable you to configure disk quotas. A Quota mini-HOWTO is maintained at http://www.tldp.org/HOWTO/mini/Quota.html.

Related Ubuntu Commands

You will use these commands to manage user accounts in Ubuntu: . ac—A user account-statistics command . change—Sets or modifies user password expiration policies . chfn—Creates or modifies user finger information in /etc/passwd . chgrp—Modifies group memberships . chmod—Changes file permissions . chown—Changes file ownerships . chpasswd—Batch command to modify user passwords . chsh—Modifies a user’s shell . groups—Displays existing group memberships . logname—Displays a user’s login name . newusers—Batches user management command . passwd—Creates or modifies user passwords . su—Executes shell or command as another user . sudo—Manages selected user execution permissions . useradd—Creates, modifies, or manages users . usermod—Edits a user’s login profile

10

232

CHAPTER 10

Managing Users

Reference . http://www.ibiblio.org/pub/Linux/docs/HOWTO/other-formats/html_single/_UserAuthentication-HOWTO.html—The User-Authentication HOWTO describes how user and group information is stored and used for authentication. . http://www.ibiblio.org/pub/Linux/docs/HOWTO/other-formats/html_single/ShadowPassword-HOWTO.html—The Shadow-Password HOWTO delves into the murky depths of shadow passwords and even discusses why you might not want to use them. . http://www.ibiblio.org/pub/Linux/docs/HOWTO/other-formats/html_single/ _Security-HOWTO.html—A must-read HOWTO, the Security HOWTO is a good overview of security issues. Especially applicable to this chapter are sections on creating accounts, file permissions, and password security. . http://www.secinf.net/unix_security/Linux_Administrators_Security_Guide/—A general guide, the Linux System Administrator’s Security Guide has interesting sections on limiting and monitoring users. . http://www.ibiblio.org/pub/Linux/docs/HOWTO/other-formats/html_single/ConfigHOWTO.html—How can you customize some user-specific settings? The Config HOWTO Software Configuration gives some advice. . http://www.ibiblio.org/pub/Linux/docs/HOWTO/other-formats/html_single/Path. html—How can one know the true path? The Path HOWTO sheds light on this issue. You need to understand paths if you want to guide the users to their data and applications. . http://www.courtesan.com/sudo/—The SUperuser DO command is a powerful and elegant way to delegate authority to regular users for specific commands. . http://www.kernel.org/pub/linux/libs/pam/index.html—The Pluggable Authentication Modules suite contains complex and highly useful applications that provide additional security and logging for passwords. PAM is installed by default in Ubuntu. It isn’t necessary to understand the intricacies of PAM to use it effectively.

CHAPTER

11

Automating Tasks

IN THIS CHAPTER . Running Services at Bootup . Beginning the Boot Loading Process . Starting and Stopping Services Manually . Scheduling Tasks

In this chapter you learn about the five ways to automate tasks on your system: making them services that run as your system starts, making them services you start and stop by hand, scheduling them to run at specific times, connecting multiple commands together on the shell, and writing custom scripts that group everything together under one command. After you turn on the power switch, the boot process begins with the computer executing code stored in a chip called the BIOS; this process occurs no matter what operating system you have installed. The Linux boot process begins when the code known as the boot loader starts loading the Linux kernel and ends only when the login prompt appears. As a system administrator, you will use the skills you learn in this chapter to control your system’s services and manage runlevels on your computer. Understanding the management of the system services and states is essential to understanding how Linux works (especially in a multi-user environment) and will help untangle the mysteries of a few of your Ubuntu system’s configuration files. Furthermore, a good knowledge of the cron daemon that handles task scheduling is essential for administrators at all skill levels. This chapter is also an introduction to the basics of creating shell scripts, or executable text files written to conform to shell syntax. Shell scripts run like any other command under Linux and can contain complex logic or a simple series of Linux command-line instructions. You can also run other shell scripts from within a shell program. The features and functions for several Linux shells are discussed in this chapter after a short introduction to working from the shell

. Basic Shell Control . Writing and Executing a Shell Script . Reference

234

CHAPTER 11

Automating Tasks

command line. You learn how to write and execute a simple shell program using bash, one of the most popular Linux shells.

Running Services at Bootup Although most people consider a computer to be either on or off, in Ubuntu there are a number of states in between. Known as runlevels, they control what system services are started upon bootup. These services are simply applications running in the background that provide some needed function to your system, such as getting information from your mouse and sending it to the display; or a service could monitor the partitions to see whether they have enough free space left on them. Services are typically loaded and run (also referred to as being started) during the boot process, in the same way as Microsoft Windows services are. Internally, Ubuntu uses a system known as Upstart for fast booting, but this has a special backward compatibility layer that uses runlevels in the way that Linux veterans are accustomed. You can manage nearly every aspect of your computer and how it behaves after booting via configuring and ordering boot scripts, as well as by using various system administration utilities included with Ubuntu. In this chapter, you learn how to work with these boot scripts and system administration utilities. This chapter also offers advice for troubleshooting and fixing problems that might arise with software configuration or the introduction or removal of various types of hardware from your system.

Beginning the Boot Loading Process Although the actual boot loading mechanism for Linux varies on different hardware platforms (such as the SPARC, Alpha, or PowerPC systems), Intel-based PCs running Ubuntu most often use the same mechanism throughout product lines. This process is accomplished through a Basic Input Output System, or BIOS. The BIOS is an application stored in a chip on the motherboard that initializes the hardware on the motherboard (and often the hardware that’s attached to the motherboard). The BIOS gets the system ready to load and run the software that we recognize as the operating system. As a last step, the BIOS code looks for a special program known as the boot loader or boot code. The instructions in this little bit of code tell the BIOS where the Linux kernel is located, how it should be loaded into memory, and how it should be started. If all goes well, the BIOS looks for a bootable volume such as a floppy disk, CD-ROM, hard drive, RAM disk, or other media. The bootable volume contains a special hexadecimal value written to the volume by the boot loader application (likely either GRUB or LILO, although LILO is not provided with Ubuntu) when the boot loader code was first installed in the system’s drives. The BIOS searches volumes in the order established by the BIOS settings (for example, the floppy first, followed by a CD-ROM, and then a hard drive) and then boots from the first bootable volume it finds. Modern BIOS’s allow considerable flexibility in choosing the device used for booting the system.

Beginning the Boot Loading Process

235

NOTE

Next, the BIOS looks on the bootable volume for boot code in the partition boot sector also known as the Master Boot Record (MBR) of the first hard disk. The MBR contains the boot loader code and the partition table—think of it as an index for a book, plus a few comments on how to start reading the book. If the BIOS finds a boot loader, it loads the boot loader code into memory. At that point, the BIOS’s job is completed, and it passes control of the system to the boot loader. The boot loader locates the Linux kernel on the disk and loads it into memory. After that task is completed, the boot loader passes control of the system to the Linux kernel. You can see how one process builds on another in an approach that enables many different operating systems to work with the same hardware.

NOTE Linux is very flexible and can be booted from multiple images on a CD-ROM, over a network using PXE (pronounced “pixie”) or NetBoot, or on a headless server with the console display sent over a serial or network connection. Work is even underway to create a special Linux BIOS at http://www.coreboot.org/ that will expedite the boot process because Linux does not need many of the services offered by the typical BIOS. This kind of flexibility enables Linux to be used in a variety of ways, such as remote servers or diskless workstations, which are not generally seen in personal home use.

Loading the Linux Kernel In a general sense, the kernel manages the system resources. As the user, you do not often interact with the kernel, but instead just the applications that you are using. Linux refers to each application as a process, and the kernel assigns each process a number called a process ID (PID). First, the Linux kernel loads and runs a process named init, which is also known as the “father of all processes” because it starts every subsequent process.

NOTE Details about the sequence of events that occur when the Linux kernel is loaded can be found in the file /usr/src/linux-2.6/init/main.c if you have installed the Linux kernel documentation.

11

If the BIOS detects a hardware problem, the boot process will fail and the BIOS will generate a few beeps from the system speaker. These “beep codes” indicate the nature of the problem the BIOS has encountered. The codes vary among manufacturers, and the diagnosis of problems occurring during this phase of the boot process is beyond the scope of this book and does not involve Linux. If you encounter a problem, you should consult the motherboard manual or contact the manufacturer of the motherboard.

236

CHAPTER 11

Automating Tasks

This next step of the boot process begins with a message that the Linux kernel is loading, and a series of messages will be printed to the screen, giving you the status of each command. A failure should display an error message. The -quiet option may be passed to the kernel at boot time to suppress many of these messages. If the boot process were halted at this point, the system would just sit idle and the screen would be blank. In order to make the system useful for users, we need to start the system services. Those services are some of the applications that allow us to interact with the system.

System Services and Runlevels The init command boots Ubuntu to a specific system state, commonly referred to as its runlevel. Runlevels determine which of the many available system services are started, as well as in which order they start. A special runlevel is used to stop the system, and a special runlevel is used for system maintenance. As you will see, there are other runlevels for special purposes. You will use runlevels to manage the system services running on your computer. All these special files and scripts are set up during your installation of Ubuntu Linux, and they receive their initial values based on your choices during the installation—as described in Chapter 3, “Installing Ubuntu,” and Chapter 4, “Post-Installation Configuration.” You can change and control them manually, as you learn later in this chapter using tools of varying sophistication.

Runlevel Definitions The Ubuntu runlevels are defined for the Ubuntu system in /etc/init.d. Each runlevel tells the init command what services to start or stop. Although runlevels might all have custom definitions, Ubuntu has adopted some standards for runlevels: . Runlevel 0—Known as “halt,” this runlevel is used to shut down the system. . Runlevel 1—This is a special runlevel, defined as “single,” which boots Ubuntu to a root access shell prompt where only the root user may log in. It has networking, X, and multi-user access turned off. This is the maintenance or rescue mode. It allows the system administrator to perform work on the system, make backups, or repair configuration or other files. . Runlevel 2—This is the default runlevel for Ubuntu. . Runlevels 3–5—These runlevels aren’t used in Ubuntu but are often used in other Linux distributions. . Runlevel 6—This runlevel is used to reboot the system. Runlevel 1 (also known as single-user mode or maintenance mode) is most commonly used to repair file systems and change the root password on a system when the password


237

has been forgotten. Trespassers with physical access to the machine can also use runlevel 1 to access your system.

11

CAUTION Never forget that uncontrolled physical access is virtually a guarantee of access to your data by an intruder.

Booting into the Default Runlevel Ubuntu boots into runlevel 2 by default, which means it starts the system as normal and leaves you inside the X Window System looking at the Gnome login prompt. It knows what runlevel 2 needs to load by looking in the rc*.d directories in /etc. Ubuntu contains directories for rc0.d through to rc5.d and rcS.d. Assuming that the value is 1, the rc script then executes all the scripts under the /etc/rc.1 directory and then launches the graphical login.

If Ubuntu is booted to runlevel 1, for example, scripts beginning with the letter K followed by scripts beginning with the letter S under the /etc/rc1.d directory are then executed: # ls /etc/rc1.d/ K01gdm K19hplip K20laptop-mode K20vsftpd K80slapd K01usplash K20acpi-support K20makedev k21acpid K86ppp ...etc... K19cupsys K20inetutils-inetd K20ssh K74-bluez-utils S20single

These scripts, as with all scripts in the rc*.d directories, are actually symbolic links to system service scripts under the /etc/init.d directory. The rc1.d links are prefaced with a letter and number, such as K15 or S10. The (K) or (S) in these prefixes indicate whether or not a particular service should be killed (K) or started (S) and pass a value of stop or start to the appropriate /etc/init.d script. The number in the prefix executes the specific /etc/init.d script in a particular order. The symlinks have numbers to delineate the order in which they are started. Nothing is sacred about a specific number, but some services need to be running before others are started. You would not want your Ubuntu system to attempt, for example, to mount a remote Network File System (NFS) volume without first starting networking and NFS services.

Booting to a Non-Default Runlevel with GRUB There might come a time when you do not want to boot into the default runlevel, such as when you want to repair the X server or install a new graphics driver. You’ll need to follow several specific steps to boot to a non-default runlevel if you use the default boot loader for Ubuntu, GRUB.

238

CHAPTER 11

Automating Tasks

NOTE If you have enabled a GRUB password, you must first press p, type your password, and then press Enter before using this boot method.

The GRUB boot loader passes arguments, or commands, to the kernel at boot time. These arguments are used, among other things, to tell GRUB where the kernel is located and also to pass specific parameters to the kernel, such as how much memory is available or how special hardware should be configured. To override the default runlevel, you can add an additional kernel argument to GRUB as follows: 1. At the graphical boot screen, press e (for edit), scroll down to select the kernel, and press e again. 2. Press the spacebar, type single or 1 (Ubuntu allows S and s as well), and press Enter. 3. Finally, press b to boot, and you’ll boot into runlevel 1 instead of the default runlevel listed in /etc/inittab.

Understanding init Scripts and the Final Stage of Initialization Each /etc/init.d script, or init script, contains logic that determines what to do when receiving a start or stop value. The logic might be a simple switch statement for execution, as in this example: case “$1” in start) start ;; stop) stop ;; restart) restart ;; reload) reload ;; status) rhstatus ;; condrestart) [ -f /var/lock/subsys/smb ] && restart || : ;; *) echo $”Usage: $0 {start|stop|restart|status|condrestart}”


239

exit 1 esac

Note that not all scripts will use this approach, and that other messages might be passed to the service script, such as restart, reload, or status. Also, not all scripts will respond to the same set of messages (with the exception of start and stop, which they all have to accept by convention) because each service might require special commands. After all the system scripts have been run, your system is configured and all the necessary system services have been started. If you are using a runlevel other than 5, the final act of the init process is to launch the user shell—bash, tcsh, zsh, or any of the many command shells available. The shell launches and you see a login prompt on the screen.

Controlling Services at Boot with Administrative Tools In the Services dialog (shown in Figure 11.1) Ubuntu lists all the services that you can have automatically start at boot time. They are usually all enabled by default, but you can simply uncheck the ones you don’t want and click OK. It is not recommended that you disable services randomly “to make things go faster.” Some services might be vital for the continuing operation of your computer, such as the graphical login manager and the system communication bus.

FIGURE 11.1 You can enable and disable Ubuntu’s boot-up services by toggling the checkboxes in the Services dialog.

11

Although the scripts can be used to customize the way that the system runs from poweron, absent the replacement of the kernel, this script approach also means that the system does not have to be halted in total to start, stop, upgrade, or install new services.

240

CHAPTER 11

Automating Tasks

Changing Runlevels After making changes to system services and runlevels, you can use the telinit command to change runlevels on-the-fly on a running Ubuntu system. Changing runlevels this way allows system administrators to alter selected parts of a running system in order to make changes to the services or to put changes into effect that have already been made (such as reassignment of network addresses for a networking interface). For example, a system administrator can quickly change the system to maintenance or single-user mode by using the telinit command with its S option like this: # telinit S

The telinit command uses the init command to change runlevels and shut down currently running services. After booting to single-user mode, you can then return to multi-user mode, like this: # telinit 2

TIP Linux is full of shortcuts: If you exit the single-user shell by typing exit at the prompt, you will go back to the default runlevel without worrying about using telinit.

Troubleshooting Runlevel Problems Reordering or changing system services during a particular runlevel is rarely necessary when using Ubuntu unless some disaster occurs. But system administrators should have a basic understanding of how Linux boots and how services are controlled in order to perform troubleshooting or to diagnose problems. By using additional utilities such as the dmesg | less command to read kernel output after booting or by examining system logging with cat /var/log/messages | less, it is possible to gain a bit more detail about what is going on when faced with troublesome drivers or service failure. To better understand how to troubleshoot service problems in Ubuntu, look at the diagnosis and resolution of a typical service-related issue. In this example, X will not start: You don’t see a desktop displayed, nor does the computer seem to respond to keyboard input. The X server might either be hung in a loop, repeatedly failing, or might exit to a shell prompt with or without an error message. The X server only attempts to restart itself in runlevel 2, so to determine whether the X server is hung in a loop, try switching to runlevel 1.

Starting and Stopping Services Manually

241

TIP

Change to runlevel 1 by running the command telinit 1. This switch to runlevel 1 will stop the X server from attempting to restart itself. Now you can easily examine the error and attempt to fix it. First, try to start the X server “naked” (without also launching the window manager). If you are successful, you will get a gray screen with a large X in the middle. If so, kill X with the Ctrl+Alt+Backspace key combination, and look at your window manager configuration. (This configuration varies according to which window manager you have chosen.) Let us assume that X won’t run “naked.” If we look at the log file for Xorg (it’s clearly identified in the /var/log directory), we’ll pay attention to any line that begins with (EE), the special error code. We can also examine the error log file, .xsessions-error, in our home directory if such a file exists. If we find an error line, the cause of the error might or might not be apparent to us. The nice thing about the Linux community is that it is very unlikely that you are the first person to experience that error. Enter the error message (or better, a unique part of it) into http://www.google.com/linux and discover what others have had to say about the problem. You might need to adjust your search to yield usable results, but that level of detail is beyond the scope of this chapter. Make adjustments and retest as before until you achieve success. Fix the X configuration and start X with startx. Repeat as necessary.

CAUTION Before making any changes to any configuration file, always make a backup copy of the original, unmodified file. Our practice is to append the extension .original to the copy because that is a unique and unambiguous identifier. If you need to restore the original configuration file, do not rename it, but copy it back to its original name.

Starting and Stopping Services Manually If you change a configuration file for a system service, it is usually necessary to stop and restart the service to make it read the new configuration. If you are reconfiguring the X server, it is often convenient to change from runlevel 2 to runlevel 1 to make testing

11

If you are working on a multi-user system and might inadvertently interrupt the work of other users, ask them to save their current work; then change to a safer runlevel, such as single user mode.

242

CHAPTER 11

Automating Tasks

easier and then switch back to runlevel 2 to re-enable the graphical login. If a service is improperly configured, it is easier to stop and restart it until you have it configured correctly than it is to reboot the entire machine. The traditional way to manage a service (as root) is to call the service’s /etc/init.d name on the command line with an appropriate keyword, such as start, status, or stop. For example, to start the Apache web server, call the /etc/init.d/apache2 script like this: sudo /etc/init.d/apache2 start Starting apache 2.2 web server

[

OK

]

The script will execute the proper program(s) and report the status of it. Stopping services is equally easy, using the stop keyword.

Scheduling Tasks There are three ways to schedule commands in Ubuntu, all of which work in different ways. The first is the at command, which specifies a command to run at a specific time and date relative to today. The second is the batch command, which is actually a script that redirects you to the at command with some extra options set so your command runs when the system is quiet. The last option is the cron daemon, which is the Linux way of executing tasks at a given time.

Using at and batch to Schedule Tasks for Later If there is a time-intensive task you want to run, but you do not want to do it while you are still logged in, you can tell Ubuntu to run it later with the at command. To use at, you need to tell it the time at which you want to run and then press Enter. You will then see a new prompt that starts with at>, and everything you type there until you press Ctrl+D will be the commands you want at to run. When the designated time arrives, at will perform each action individually and in order, which means later commands can rely on the results of earlier commands. In this next example, run at just after 5 p.m., at is used to download and extract the latest Linux kernel at a time when the network should be quiet: [paul@caitlin ~]$ at now + 7 hours at> wget http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.10.tar.bz2 at> tar xvfjp linux-2.6.10.tar.bz2 at> <EOT> job 2 at 2005-01-09 17:01

Scheduling Tasks

243

If you have a more complex job, you can use the –f parameter to have at read its commands from a file, like this: echo wget http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.10.tar.bz2\; tar xvfjp linux-2.6.10.tar.bz2 > myjob.job at –f myjob.job tomorrow

As you can see, at is flexible about the time format it takes; you can specify it in three ways: . Using the now parameter, you can specify how many minutes, hours, days, or weeks relative to the current time—for example, now + 4 weeks would run the command one month from today. . You can also specify several special times, including tomorrow, midnight, noon, or teatime (4 p.m.). If you do not specify a time with tomorrow, your job is set for precisely 24 hours from the current time. . You can specify an exact date and time using HH:MM MM/DD/YY format—for example, 16:40 22/12/05 for 4:40 p.m. on the 22nd of December 2005. When your job is submitted, at will report the job number, date, and time that the job will be executed; the queue identifier; plus the job owner (you). It will also capture all your environment variables and store them along with the job so that, when your job runs, it can restore the variables, preserving your execution environment. The job number and job queue identifier are both important. When you schedule a job using at, it is placed into queue “a” by default, which means it runs at your specified time and takes up a normal amount of resources. There is an alternative command, batch, which is really just a shell script that calls at with a few extra options. These options (-q b –m now, if you were interested) set at to run on queue b (-q b), mailing the user on completion (-m), and running immediately (now). The queue part is what is important: Jobs scheduled on queue b will only be executed when system load falls below 0.8—that is, when the system is not running at full load. Furthermore, it will run with a lower niceness, meaning a queue jobs usually have a niceness of 2, whereas b queue jobs have a niceness of 4. Because batch always specifies now as its time, you need not specify your own time; it will simply run as soon as the system is quiet. Having a default niceness of 4 means that batched commands will get less system resources than a queue job’s (at’s default) and less system resources than most other programs. You can optionally specify other queues using at. Queue c runs at niceness 6, queue d runs at niceness 8, and so on. However, it is

11

Specifying now + 7 hours as the time does what you would expect: at was run at 5 p.m., so the command will run just after midnight that night. When your job has finished, at will send you an email with a full log of your job’s output; type mail at the console to bring up your mailbox and then press the relevant number to read at’s mail.

244

CHAPTER 11

Automating Tasks

important to note that the system load is only checked before the command is run. If the load is lower than 0.8, your batch job will be run. If the system load subsequently rises beyond 0.8, your batch job will continue to run, albeit in the background, thanks to its niceness value. When you submit a job for execution, you will also be returned a job number. If you forget this or just want to see a list of other jobs you have scheduled to run later, use the atq command with no parameters. If you run this as a normal user, it will print only your jobs; running it as a superuser will print everyone’s jobs. The output is in the same format as when you submit a job, so you get the ID number, execution time, queue ID, and owner of each job. If you want to delete a job, use the atrm command followed by the ID number of the job you want to delete. This next example shows atq and atrm being used to list jobs and delete one: [paul@caitlin ~]$ atq 14 2005-01-20 23:33 a 16 2005-02-03 22:34 a 17 2005-01-25 22:34 a 15 2005-01-22 04:34 a 18 2005-01-22 01:35 b [paul@caitlin ~]$ atrm 16 [paul@caitlin ~]$ atq 14 2005-01-20 23:33 a 17 2005-01-25 22:34 a 15 2005-01-22 04:34 a 18 2005-01-22 01:35 b

paul paul paul paul paul

paul paul paul paul

In that example, job 16 is deleted using atrm, and so it does not show up in the second call to atq. The default configuration for at and batch is to allow everyone to use it, which is not always the desired behavior. Access is controlled through two files: /etc/at.allow and /etc/at.deny. By default, at.deny exists but is empty, which allows everyone to use at and batch. You can enter usernames into at.deny, one per line, to stop those users scheduling jobs. Alternatively, you can use the at.allow file; this does not exist by default. If you have a blank at.allow file, no one except root is allowed to schedule jobs. As with at.deny, you can add usernames to at.allow one per line, and those users will be able to schedule jobs. You should use either at.deny or at.allow: When someone tries to run at or batch, Ubuntu checks for her username in at.allow. If it is in there, or if at.allow does not exist, Ubuntu checks for her username in at.deny. If her username is in at.deny or at.deny does not exist, she is not allowed to schedule jobs.

Scheduling Tasks

245

Using cron to Run Jobs Repeatedly

There are two types of jobs: system jobs and user jobs. Only root can edit system jobs, whereas any user whose name appears in cron.allow or does not appear in cron.deny can run user jobs. System jobs are controlled through the /etc/crontab file, which by default looks like this: SHELL=/bin/sh PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin # m h dom mon dow user command 17 * * * * root run-parts —report /etc/cron.hourly 25 6 * * * root test –x /usr/sbin/anacron || run-parts —report /etc/cron.daily 47 6 * * 7 root test –x /usr/sbin/anacron || run-parts —report /etc/cron.weekly 52 6 1 * * root test –x /usr/sbin/anacron || run-parts —report /etc/cron.monthly

The first two lines specify which shell should be used to execute the job (defaults to the shell of the user who owns the crontab file, usually /bin/bash), and the search path for executables that will be used. It’s important that you avoid using environment variables in this path statement, as they may not be set when the job runs. The next line starts with a pound sign (#) and so is treated as a comment and ignored. The next four lines are the important parts: They are the jobs themselves. Each job is specified in seven fields that define the time to run, owner, and command. The first five commands specify the execution time in quite a quirky order: minute (0–59), hour (0–23), day of the month (1–31), month of the year (1–12), and day of the week (0–7). For day of the week, both 0 and 7 are Sunday, which means that 1 is Monday, 3 is Wednesday, and so on. If you want to specify “all values” (that is, every minute, every hour, every day, and so on), use an asterisk, *. The next field specifies the username of the owner of the job. When a job is executed, it uses the username specified here. The last field is the command to execute. So, the first job runs at minute 17, every hour of every day of every month and executes the command run-parts /etc/cron.hourly. The run-parts command is a simple script that runs all programs inside a given directory—in this case, /etc/cron.hourly. So, in this case, the job will execute at 00:17 (17 minutes past midnight), 01:17, 02:17, 03:17, and so on, and will use all the programs listed in the cron.hourly directory.

11

The at and batch commands work well if you just want to execute a single task at a later date, but they are less useful if you want to run a task frequently. Instead, there is the crond daemon for running tasks repeatedly based upon system—and user—requests. Cron has a similar permissions system to at: Users listed in the cron.deny file are not allowed to use Cron, and users listed in the cron.allow file are. An empty cron.deny file—the default—means everyone can set jobs. An empty cron.allow file means that no one (except root) can set jobs.

246

CHAPTER 11

Automating Tasks

The next job runs at minute 25 and hour 6 of every day of every month, running runparts /etc/cron.daily. Because of the hour limitation, this script will run only once per day, at 6:25 a.m. Note that it uses minute 25 rather than minute 17 so that daily jobs do not clash with hourly jobs. You should be able to guess what the next two jobs do, simply by looking at the commands they run! Inside each of those four directories (cron.hourly, cron.daily, cron.weekly, and cron.monthly) are a collection of shell scripts that will be run by run-parts. For example,

in cron.daily you will have scripts like logrotate, which handles backing up of log files, and makewhatis, which updates the whatis database. You can add other system tasks to these directories if you want to, but you should be careful to ensure your scripts are correct.

CAUTION The cron daemon reads all the system crontab files and all user crontab files once a minute (on the minute, i.e. at 6:00:00, 6:01:00, and so on) to check for changes. However, any new jobs it finds will not be executed until at least 1 minute has passed. For example, if it is 6:01:49 (that is, 49 seconds past 1 minute past 6 a.m.) and you set a cron job to run at 6:02, it will not execute. At 6:02, the cron daemon will reread its configuration files and see the new job, but it will not be able to execute it. If you set the job to run at 6:02 a.m. every day, it will be executed the following morning and every subsequent morning. This same situation exists when deleting jobs. If it is 6:01:49 and you have a job scheduled to run at 6:02, deleting it will make no difference: cron will run it before it rereads the crontab files for changes. However, after it has reread the crontab file and noticed the job is no longer there, it will not be executed in subsequent days.

There are alternative ways of specifying dates. For example, you can use sets of dates and times by using hyphens of commas, such as hours 9–15 would execute at 9, 10, 11, 12, 13, 14, and 15 (from 9 a.m. to 3 p.m.), whereas 9,11,13,15 would miss out at the even hours. Note that it is important you do not put spaces into these sets because the cron daemon will interpret them as the next field. You can define a step value with a slash (/) to show time division: */4 for hours means “every four hours all day”, and 0-12/3 means “every three hours from midnight to noon.” You can also specify day and month names rather than numbers, using three-character abbreviations: Sun, Mon, Tue, Fri, Sat for days, or Jan, Feb, Mar, Oct, Nov, Dec for months. As well as system jobs, there are also user jobs for those users who have the correct permissions. User jobs are stored in the /var/spool/cron directory, with each user having his own file in his named after his username—for instance, /var/spool/cron/paul or /var/spool/cron/root. The contents of these files contain the jobs the user wants to run and take roughly the same format as the /etc/crontab file, with the exception that the owner of the job should not be specified because it will always be the same as the filename.

Scheduling Tasks

247

So, this time each line is made up of six fields: minute (0–59), hour (0–23), day of the month (1–31), month of the year (1–12), day of the week (0–7), and then the command to run. If you are using vim and are new to it, press i to enter insert mode to edit your text; then press Esc to exit insert mode. To save and quit, type a colon followed by wq and press Enter. When programming, we tend to use a sandbox subdirectory in our home directory where we keep all sorts of temporary files that we were just playing around with. We can use a personal job to empty that directory every morning at 6 a.m. so that we get a fresh start each morning. Here is how that would like in our crontab file: 0 6 * * * rm –rf /home/paul/sandbox/*

If you are not allowed to schedule jobs, you will be stopped from editing your crontab file. Once your jobs are placed, you can use the command crontab –l to list your jobs. This just prints the contents of your crontab file, so its output will be the same as the line you just entered. If you want to remove just one job, the easiest thing to do is type crontab –e to edit your crontab file in vim; then, after having moved the cursor to the job you want to delete, type dd (two ds) to delete that line. If you want to delete all your jobs, you can use crontab –r to delete your crontab file.

TABLE 11.1 Shells with Ubuntu Name

Description

Location

bash

The Bourne Again SHell

/bin/bash

ksh

The Korn shell

/bin/ksh, /usr/bin/ksh

pdksh

A symbolic link to ksh

/usr/bin/pdksh

rsh

The restricted shell (for network operation)

/usr/bin/rsh

sh

A symbolic link to bash

/bin/sh

tcsh

A csh-compatible shell

/bin/tcsh

zsh

A compatible csh, ksh, and sh shell

/bin/zsh

11

To edit your own crontab file, type crontab –e. This brings up a text editor (vim by default, but you can set the EDITOR environment variable to change that) where you can enter your entries. The format of this file is a little different from the format for the main crontab because this time there is no need to specify the owner of the job—it is always you.

248

CHAPTER 11

Automating Tasks

Basic Shell Control Ubuntu includes a rich assortment of capable, flexible, and powerful shells. Each shell is different but has numerous built-in commands and configurable command-line prompts and might include features such as command-line history, the ability to recall and use a previous command line, and command-line editing. As an example, the bash shell is so powerful that it is possible to write a minimal web server entirely in bash’s language using 114 lines of script (see the link at the end of this chapter). Although there are many shells to choose from, most people stick with the default, bash. This is because bash does everything most people need to do, and more. Only change your shell if you really need to. Table 11.1 lists each shell, along with its description and location, in your Ubuntu file system.

Learning More About Your Shell All the shells listed in Table 11.1 have accompanying man pages, along with other documentation under the /usr/share/doc directory. Some of the documentation can be quite lengthy, but it is generally much better to have too much documentation than too little! The bash shell includes more than 100 pages in its manual, and the zsh shell documentation is so extensive that it includes the zshall meta man page (use man zshall to read this overview)!

The Shell Command Line Having a basic understanding of the capabilities of the shell command line can help you write better shell scripts. If, once you have finished reading this short introduction, you want to learn more about the command line, check out Chapter 33, “Command Line Masterclass.” You can use the shell command line to perform a number of different tasks, including . Searching files or directories with programs using pattern-matching, or expressions; these commands include the GNU gawk (linked as awk) and the grep family of commands, including egrep and fgrep. . Getting data from and sending data to a file or command, known as input and output redirection. . Feeding or filtering a program’s output to another command (called using pipes).

Basic Shell Control

249

Multiple commands can be run on a single command line using a semicolon to separate commands: $ w ; free ; df 6:02pm up 4 days, 24 min, 1 user, load average: 0.00, 0.00, 0.00 USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT bball pts/0 shuttle.home.org 1:14pm 0.00s 0.57s 0.01s w total used free shared buffers cached Mem: 190684 184420 6264 76 17620 142820 -/+ buffers/cache: 23980 166704 Swap: 1277156 2516 1274640 Filesystem 1k-blocks Used Available Use% Mounted on /dev/hda1 11788296 4478228 6711248 41% / none 95340 0 95340 0% /dev/shm

This example displays the output of the w, free, and df commands. Long shell command lines can be extended inside shell scripts or at the command line by using the backslash character (\). For example, $ echo ““this is a long \ > command line and”” ; echo ““shows that multiple commands \ > may be strung out.”” this is a long command line and shows that multiple commands may be strung out.

The first three lines of this example are a single command line. In that single line are two instances of the echo command. Note that when you use the backslash as a line-continuation character, it must be the last character on the command line (or in your shell script, as you will see later on in this chapter). Using the basic features of the shell command line is easy, but mastering use of all features can be difficult. Entire books have been devoted to using shells, writing shell scripts, and using pattern-matching expressions. The following sections provide an overview of some features of the shell command line relating to writing scripts.

Grokking grep If you plan to develop shell scripts to expand the capabilities of pattern-matching commands such as grep, you will benefit from learning more about using expressions. One of the definitive guides to using the pattern-matching capabilities of Unix and Linux commands is Mastering Regular Expressions by Jeffrey E. F. Freidl (O’Reilly), ISBN: 0596-52812-4.

11

A shell can also have built-in job-control commands to launch the command line as a background process, suspend a running program, selectively retrieve or kill running or suspended programs, and perform other types of process control.

250

CHAPTER 11

Automating Tasks

Shell Pattern-Matching Support The shell command line allows you to use strings of specially constructed character patterns for wildcard matches. This is a different simpler capability than that supported by GNU utilities such as grep, which can use more complex patterns, known as expressions, to search through files or directories or to filter data input to or out of commands. The shell’s pattern strings can be simple or complex, but even using a small subset of the available characters in simple wildcards can yield constructive results at the command line. Some common characters used for shell pattern matching are . *—Matches any character. For example, to find all files in the current directory ending in .txt, you could use $ ls *.txt

. ?—Matches a single character. For example, to find all files in the current directory ending in the extension .d?c (where ? could be 0–9, a–z, or A–Z), $ ls *.d?c

. [xxx] or [x-x]—Matches a range of characters. For example, to list all files in a directory with names containing numbers, $ ls *[0-9]*

. \x—Matches or escapes a character such as ? or a tab character. For example, to create a file with a name containing question mark, $ touch foo\?

Note that the shell might not interpret some characters or regular expressions in the same manner as a Linux command, and mixing wildcards and regular expressions in shell scripts can lead to problems unless you’re careful. For example, finding patterns in text is best left to regular expressions used with commands such as grep; simple wildcards should be used for filtering or matching filenames on the command line. And although both Linux command expressions and shell scripts can recognize the backslash as an escape character in patterns, the dollar sign ($) will have two wildly different meanings (single-character pattern matching in expressions and variable assignment in scripts).

Basic Shell Control

251

CAUTION

Redirecting Input and Output You can create, overwrite, and append data to files at the command line, using a process called input and output redirection. The shell recognizes several special characters for this process, such as >, >. In this example, the output of the ls command is redirected to create a file named textfiles.listing: $ ls *.txt >textfiles.listing

Use output redirection with care because it is possible to overwrite existing files. For example, specifying a different directory but using the same output filename will overwrite the existing textfiles.listing: $ ls /usr/share/doc/mutt-1.4/*.txt >textfiles.listing

Fortunately, most shells are smart enough to recognize when you might do something foolish. Here, the bash shell warns that the command is attempting to redirect output to a directory: $ mkdir foo $ ls >foo bash: foo: Is a directory

Output can be appended to a file without overwriting existing content by using the append operator, >>. In this example, the directory listing will be appended to the end of textfiles.listing instead of overwriting its contents: $ ls /usr/share/doc/mutt-1.4/*.txt >>textfiles.listing

You can use input redirection to feed data into a command by using the < like this: $ cat < textfiles.listing

You can use the shell here operator, output.txt

This example takes the output of the find command to feed the cat command (via xargs) the name all text files under the /d2 command. The content of all matching files is then fed through the tr command to change each space in the data stream into a carriage return. The stream of words is then sorted, and identical adjacent lines are removed using the uniq command. The output, a raw list of words, is then saved in the file named output.txt.

Background Processing The shell allows you to start a command and then launch it into the background as a process by using an ampersand (&) at the end of a command line. This technique is often used at the command line of an X terminal window to start a client and return to the command line. For example, to launch another terminal window using the xterm client, $ xterm & [3] 1437

The numbers echoed back show a number (3 in this example), which is a job number, or reference number for a shell process, and a Process ID number, or PID (1437 in this example). The xterm window session can be killed by using the shell’s built-in kill command, along with the job number like this: $ kill %3

Writing and Executing a Shell Script

253

Or the process can be killed by using the kill command, along with the PID, like so:

Background processing can be used in shell scripts to start commands that take a long time, such as backups: # tar -czf /backup/home.tgz /home &

Writing and Executing a Shell Script Why should you write and use shell scripts? Shell scripts can save you time and typing, especially if you routinely use the same command lines multiple times every day. Although you could also use the history function (press the Up or Down keys while using bash or use the history command), a shell script can add flexibility with command-line argument substitution and built-in help. Although a shell script won’t execute faster than a program written in a computer language such as C, a shell program can be smaller in size than a compiled program. The shell program does not require any additional library support other than the shell or, if used, existing commands installed on your system. The process of creating and testing shell scripts is also generally simpler and faster than the development process for equivalent C language commands.

NOTE Hundreds of commands included with Ubuntu are actually shell scripts, and many other good shell script examples are available over the Internet—a quick search will yield numerous links to online tutorials and scripting guides from fellow Linux users and developers. For example, the startx command, used to start an X Window session from the text console, is a shell script used every day by most users. To learn more about shell scripting with bash, see the Advanced Bash-Scripting Guide, listed in the “Reference” section at the end of this chapter. You’ll also find Sams Teach Yourself Shell Programming in 24 Hours a helpful guide to learning more about using the shell to build your own commands.

When you are learning to write and execute your first shell scripts, start with scripts for simple, but useful tasks. Begin with short examples, and then expand the scripts as you build on your experience and knowledge. Make liberal use of comments (lines preceded with a pound # sign) to document each section of your script. Include an author statement and overview of the script as additional help, along with a creation date or version number. Write shell scripts using a text editor such as vi because it does not automatically

11

$ kill 1437

254

CHAPTER 11

Automating Tasks

wrap lines of text. Line wrapping can break script syntax and cause problems. If you use the nano editor, include its -w flag to disable line wrap. In this section, you learn how to write a simple shell script to set up a number of aliases (command synonyms) whenever you log on. Instead of typing all the aliases every time you log on, you can put them in a file by using a text editor, such as vi, and then execute the file. Normally these changes are saved in systemwide shell configuration files under the /etc directory to make the changes active for all users or in your .bashrc, .cshrc (if you use tcsh), or .bash_profile files in your home directory. Here is what is contained in myenv, a sample shell script created for this purpose (for bash): #!/bin/sh alias ll=’ls -l’ alias ldir=’ls -aF’ alias copy=’cp’

This simple script creates command aliases, or convenient shorthand forms of commands, for the ls and cp commands. The ll alias provides a long directory listing: The ldir alias is the ls command, but prints indicators (for directories or executable files) in listings. The copy alias is the same as the cp command. You can experiment and add your own options or create aliases of other commands with options you frequently use. You can execute myenv in a variety of ways under Linux. As shown in this example, you can make myenv executable by using the chmod command and then execute it as you would any other native Linux command: $ chmod +x myenv

This line turns on the executable permission of myenv, which can be checked with the ls command and its -l option like this: $ ls -l myenv -rwxrwxr-x 1 winky

winky

11 Aug 26 17:38 myenv

Running the New Shell Program You can run your new shell program in several ways. Each method will produce the same results, which is a testament to the flexibility of using the shell with Linux. One way to run your shell program is to execute the file myenv from the command line as if it were a Linux command:


255

$ ./myenv

$ pdksh myenv

This invokes a new pdksh shell and passes the filename myenv as a parameter to execute the file. A third way will require you to create a directory named bin in your home directory, and to then copy the new shell program into this directory. You can then run the program without the need to specify a specific location or to use a shell. You do this like so: $ mkdir bin $ mv myenv bin $ myenv

This works because Ubuntu is set up by default to include the executable path $HOME/bin in your shell’s environment. You can view this environment variable, named PATH, by piping the output of the env command through fgrep like so: $ env | fgrep PATH /usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin: \ /usr/X11R6/bin:/sbin:/home/paul/bin

As you can see, the user (paul in this example) can use the new bin directory to hold executable files. Another way to bring up an environment variable is to use the echo command along with the variable name (in this case, $PATH): $ echo $PATH /usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/bball/bin

CAUTION Never put . in your $PATH in order to execute files or a command in the current directory—this presents a serious security risk, especially for the root operator, and even more so if . is first in your $PATH search order. Trojan scripts placed by crackers in directories such as /tmp can be used for malicious purposes, and will be executed immediately if the current working directory is part of your $PATH.

Storing Shell Scripts for Systemwide Access After you execute the command myenv, you should be able to use ldir from the command line to get a list of files under the current directory and ll to get a list of files with attributes displayed. However, the best way to use the new commands in myenv is to put them

11

A second way to execute myenv under a particular shell, such as pdksh, is as follows:

256

CHAPTER 11

Automating Tasks

into your shell’s login or profile file. For Ubuntu, and nearly all Linux users, the default shell is bash, so you can make these commands available for everyone on your system by putting them in the /etc/bashrc file. Systemwide aliases for tcsh are contained in files with the extension .csh under the /etc/profile.d directory. The pdksh shell can use these command aliases as well.

NOTE To use a shell other than bash after logging in, use the chsh command from the command line or the system-config-users client during an X session. You’ll be asked for your password (or the root password if using system-config-users), as well as the location and name of the new shell (refer to Table 11.1). The new shell will become your default shell, but only if its name is in the list of acceptable system shells in /etc/shells.

Interpreting Shell Scripts Through Specific Shells The majority of shell scripts use a shebang line (#!) at the beginning to control the type of shell used to run the script; this bang line calls for an sh-incantation of bash: #!/bin/sh

A shebang line (it is short for “sharp” and “bang”, two names for # and !) tells the Linux kernel that a specific command (a shell, or in the case of other scripts, perhaps awk or Perl) is to be used to interpret the contents of the file. Using a shebang line is common practice for all shell scripting. For example, if you write a shell script using bash, but want the script to execute as if run by the Bourne shell, sh, the first line of your script will contain #!/bin/sh, which is a link to the bash shell. Running bash as sh will cause bash to act as a Bourne shell. This is the reason for the symbolic link sh, which points to bash.

The Shebang Line The shebang line is a magic number, as defined in /usr/share/magic—a text database of magic numbers for the Linux file command. Magic numbers are used by many different Linux commands to quickly identify a type of file, and the database format is documented in the section five manual page named magic (read by using man 5 magic). For example, magic numbers can be used by the Linux file command to display the identity of a script (no matter what filename is used) as a shell script using a specific shell or other interpreter such as awk or Perl.


257

$ env ... VENDOR=intel MACHTYPE=i386 HOSTTYPE=i386-linux HOST=thinkpad.home.org

On the other hand, bash might provide these variables or variables of the same name with a slightly different definition, such as $ env ... HOSTTYPE=i386 HOSTNAME=thinkpad.home.org

Although the behavior of a shebang line is not defined by POSIX, variations of its use can be helpful when you are writing shell scripts. For example, as described in the wish man page, you can use a shell to help execute programs called within a shell script without needing to hard code pathnames of programs. The wish command is a windowing Tool Control Language (tcl) interpreter that can be used to write graphical clients. Avoiding the use of specific pathnames to programs increases shell script portability because not every Unix or Linux system has programs in the same location. For example, if you want to use the wish command, your first inclination might be to write #!/usr/local/bin/wish

11

You might also find different or new environment variables available to your scripts by using different shells. For example, if you launch csh from the bash command line, you will find several new variables or variables with slightly different definitions, such as

258

CHAPTER 11

Automating Tasks

Although this will work on many other operating systems, the script will fail under Linux because wish is located under the /usr/bin directory. However, if you write the command line this way, #!/bin/sh exec wish “$@”

You can use the wish command (as a binary or a shell script itself); your first inclination might be to write in Linux.

Using Variables in Shell Scripts When writing shell scripts for Linux, you work with three types of variables: . Environment variables—Part of the system environment, you can use them in your shell program. New variables can be defined, and some of them, such as PATH, can also be modified within a shell program. . Built-in variables—These are variables such as options used on the command (interpreted by the shell as a positional argument) are provided by Linux. Unlike environment variables, you cannot modify them. . User variables—Defined by you when you write a shell script. You can use and modify them at will within the shell program. A major difference between shell programming and other programming languages is that in shell programming, variables are not typed—that is, you do not have to specify whether a variable is a number or a string, and so on.

Assigning a Value to a Variable Say that you want to use a variable called lcount to count the number of iterations in a loop within a shell program. You can declare and initialize this variable as follows: Command

Environment

lcount=0

pdksh and bash

set lcount=0

tcsh

NOTE Under pdksh and bash, you must ensure that the equal sign (=) does not have spaces before and after it.


259

To store a string in a variable, you can use the following: Environment

myname=Sanjiv

pdksh and bash

set myname=Sanjiv

tcsh

Use the preceding variable form if the string doesn’t have embedded spaces. If a string has embedded spaces, you can do the assignment as follows: Command

Environment

myname=”Sanjiv Guha”

pdksh and bash

set myname=”Sanjiv Guha”

tcsh

Accessing Variable Values You can access the value of a variable by prefixing the variable name with a $ (dollar sign). That is, if the variable name is var, you can access the variable by using $var. If you want to assign the value of var to the variable lcount, you can do so as follows: Command

Environment

lcount=$var

pdksh and bash

set lcount=$var

tcsh

Positional Parameters It is possible to pass options from the command line or from another shell script to your shell program. These options are supplied to the shell program by Linux as positional parameters, which have special names provided by the system. The first parameter is stored in a variable called 1 (number 1) and can be accessed by using $1 within the program. The second parameter is stored in a variable called 2 and can be accessed by using $2 within the program, and so on. One or more of the higher numbered positional parameters can be omitted while you’re invoking a shell program. Understanding how to use these positional parameters and how to access and use variables retrieved from the command line is necessary when developing more advanced shell programs.

A Simple Example of a Positional Parameter For example, if a shell program mypgm expects two parameters—such as a first name and a last name—you can invoke the shell program with only one parameter, the first name. However, you cannot invoke it with only the second parameter, the last name.

11

Command

260

CHAPTER 11

Automating Tasks

Here is a shell program called mypgm1, which takes only one parameter (a name) and displays it on the screen: #!/bin/sh #Name display if [ $# -eq 0 then echo “Name else echo “Your fi

program ] not provided” name is “$1

If you execute mypgm1, as follows, $ bash

mypgm1

you get the following output: Name not provided

However, if you execute mypgm1, as follows, $ bash

mypgm1 Sanjiv

you get the following output: Your name is Sanjiv

The shell program mypgm1 also illustrates another aspect of shell programming: the built-in variables provided to the shell by the Linux kernel. In mypgm1, the built-in variable $# provides the number of positional parameters passed to the shell program. You learn more about working with built-in variables in the next major section of this chapter.

Using Positional Parameters to Access and Retrieve Variables from the Command Line Using positional parameters in scripts can be helpful if you need to use command lines with piped commands requiring complex arguments. Shell programs containing positional parameters can be even more convenient if the commands are infrequently used. For example, if you use your Ubuntu system with an attached voice modem as an answering machine, you can write a script to issue a command that retrieves and plays the voice messages. The following lines convert a saved sound file (in .rmd or voice-phone format) and pipe the result to your system’s audio device: #!/bin/sh # play voice message in /var/spool/voice/incoming rmdtopvf /var/spool/voice/incoming/$1 | pvfspeed -s 8000 | \ pvftobasic >/dev/audio

A voice message can then easily be played back using this script (perhaps named pmm): $ pmm name_of_message


261

Using a Simple Script to Automate Tasks You could use a simple script, for example, to examine your system log for certain keywords. If the script is run via your system’s scheduling table, /etc/crontab, it can help automate security monitoring. By combining the output capabilities of existing Linux commands with the language facilities of the shell, you can quickly build a useful script to perform a task normally requiring a number of command lines. For example, you can create a short script, named greplog, like this: #!/bin/sh # name: greplog # use: mail grep of designated log using keyword # version: v.01 08aug02 # # author: bb # # usage: greplog [keyword] [logpathname] # # bugs: does not check for correct number of arguments # build report name using keyword search and date log_report=/tmp/$1.logreport.`date ‘+%m%d%y’` # build report header with system type, hostname, date and time echo “==============================================================” \ >$log_report echo “ S Y S T E M M O N I T O R L O G” >>$log_report echo uname -a >>$log_report echo “Log report for” `hostname -f` “on” `date ‘+%c’` >>$log_report echo “==============================================================” \ >>$log_report ; echo ““ >>$log_report # record log search start echo “Search for->” $1 “starting” `date ‘+%r’` >>$log_report echo ““ >>$log_report # get and save grep results of keyword ($1) from logfile ($2) grep -i $1 $2 >>$log_report # build report footer with time echo ““ >>$log_report echo “End of” $log_report at `date ‘+%r’` >>$log_report

11

Shell scripts that contain positional parameters are often used for automating routine and mundane jobs, such as system log report generation, file system checks, user resource accounting, printer use accounting, and other system, network, or security administration tasks.

262

CHAPTER 11

Automating Tasks

# mail report to root mail -s “Log Analysis for $1” root FAILED starting 04:23:24 PM Oct 23 16:23:04 stinkpad login[1769]: FAILED LOGIN 3 FROM (null) FOR bball, +Authentication failure End of /tmp/FAILED.logreport.102303 at 04:23:24 PM

To further automate the process, you can include command lines using the script in another script to generate a series of searches and reports.


263

Built-In Variables

Some of these variables are . $#—Number of positional parameters passed to the shell program . $?—Completion code of the last command or shell program executed within the shell program (returned value) . $0—The name of the shell program . $*—A single string of all arguments passed at the time of invocation of the shell program To show these built-in variables in use, here is a sample program called mypgm2: #!/bin/sh #my test program echo “Number of parameters is $#” echo “Program name is $0” echo “Parameters as a single string is $*”

If you execute mypgm2 from the command line in pdksh and bash as follows, $ bash mypgm2 Sanjiv Guha

you get the following result: Number of parameters is 2 Program name is mypgm2 Parameters as a single string is Sanjiv Guha

Special Characters Some characters have special meaning to Linux shells; these characters represent commands, denote specific use for surrounding text, or provide search parameters. Special characters provide a sort of shorthand by incorporating these rather complex meanings into a simple character. Some special characters are shown in Table 11.2.

11

Built-in variables are special variables provided to shell by Linux that can be used to make decisions within a shell program. You cannot modify the values of these variables within the shell program.

264

CHAPTER 11

Automating Tasks

TABLE 11.2 Special Shell Characters Character

Explanation

$

Indicates the beginning of a shell variable name

|

Pipes standard output to next command

#

Starts a comment

&

Executes a process in the background

?

Matches one character

*

Matches one or more characters

>

Output redirection operator

>

Output redirection operator (to append to a file)

etc.tar

and the result is the same.

Using Backup Software

311

All files in the /etc directory will be saved to a file named etc.tar. With an impressive array of options (see the man page), tar is quite flexible and powerful in combination with shell scripts. With the -z option, it can even create and restore gzip compressed archives while the -j option works with bzipped files. Creating Full and Incremental Backups with tar If you want to create a full backup, sudo tar cjvf fullbackup.tar.bz2 /

To perform an incremental backup, you must locate all the files that have been changed since the last backup. For simplicity, assume that you do incremental backups on a daily basis. To locate the files, use the find command: sudo find / -newer name_of_last_backup_file ! -a –type f –print

When run alone, find will generate a list of files systemwide and print it to the screen. The ! -a -type eliminates everything but regular files from the list; otherwise, the entire directory would be sent to tar even if the contents was not all changed. Pipe the output of our find command to tar as follows: sudo find / -newer name_of_last_backup_file ! –type d -print |\ tar czT - backup_file_name_or_device_name

Here, the T - option gets the filenames from a buffer (where the - is the shorthand name for the buffer).

NOTE The tar command can back up to a raw device (one with no file system) as well as a formatted partition. For example, sudo tar cvzf /dev/hdd

/boot

/etc /home

backs up those directories to device /dev/hdd (not /dev/hda1, but to the unformatted device itself). The tar command can also back up over multiple floppy disks: sudo tar czvMf /dev/fd0 /home

will back up the contents of /home and spread the file out over multiple floppies, prompting you with this message: Prepare volume #2 for ‘/dev/fd0’ and hit return:

Restoring Files from an Archive with tar The xp option in tar will restore the files from a backup and preserve the file attributes as well, and tar will create any subdirectories it needs. Be careful when using this option

13

will create a bzip2 compressed tarball (the j option) of the entire system.

312

CHAPTER 13

Backing Up

because the backups might have been created with either relative or absolute paths. You should use the tvf option with tar to list the files in the archive before extracting them so that you will know where they will be placed. For example, to restore a tar archive compressed with bzip2, sudo tar xjvf ubuntutest.tar.bz2

To list the contents of a tar archive compressed with bzip2, sudo tar tjvf ubuntutest.tar.bz2 drwxrwxr-x paul/paul 0 2003-09-04 18:15:05 ubuntutest/ -rw-rw-r— paul/paul 163 2003-09-03 22:30:49 ‹ubuntutest/ubuntu_screenshots.txt -rw-rw-r— paul/paul 840 2003-09-01 19:27:59 ‹ubuntutest/a_guideline.txt -rw-rw-r— paul/paul 1485 2003-09-01 18:14:23 ubuntutest/style-sheet.txt -rw-rw-r— paul/paul 931 2003-09-01 19:02:00 ubuntutest/ubuntu_TOC.txt

Note that because the pathnames do not start with a backslash, they are relative pathnames and will install in your current working directory. If they were absolute pathnames, they would install exactly where the paths state.

The GNOME File Roller The GNOME desktop file archiving graphical application File Roller (file-roller) will view, extract, and create archive files using tar, gzip, bzip, compress, zip, rar, lha, and several other compression formats. Note that File Roller is only a front-end to the command-line utilities that actually provide these compression formats; if they are not installed, File Roller cannot use that format.

CAUTION File Roller will not complain if you select a compression format that is not supported by installed software until after you attempt to create the archive. Install any needed compression utilities first.

File Roller is well-integrated with the GNOME desktop environment to provide convenient drag-and-drop functionality with the Nautilus file manager. To create a new archive, select Archive, New to open the New Archive dialog box and navigate to the directory where you want the archive to be kept. Type your archive’s name in the Selection: /root text box at the bottom of the New Archive dialog box. Use the Archive type drop-down menu to select a compression method. Now, drag the files that you want to be included from


313

Nautilus into the empty space of the File Roller window, and the animated icons will show that files are being included in the new archive. When you are done, a list of files will be shown in the previously blank File Roller window (see Figure 13.1). To save the archive, simply select Archive, Close. Opening an archive is as easy as using the Archive, Open dialog to select the appropriate archive file.

13

FIGURE 13.1 Drag and drop files to build an archive with the GNOME File Roller.

Ubuntu provides you with the KDE ark and kdat GUI tools for backups; they are installed only if you select the KDE desktop during installation, but you can search through Synaptic to find them. Archiving has traditionally been a function of the system administrator and not seen as a task for the individual user, so no elaborate GUI was believed necessary. Backing up has also been seen as a script driven, automated task in which a GUI is not as useful. Although that’s true for sysadmins, home users usually want something a little more attractive and easier to use, and that’s the exact gap filled by ark.

The KDE ark Archiving Tool You launch ark by launching it from the command line. It is integrated with the KDE desktop (like File Roller is with GNOME), so it might be a better choice if you use KDE. This application provides a graphical interface to viewing, creating, adding to, and extracting from archived files as shown in Figure 13.2. Several configuration options are available with ark to ensure its compatibility with MS Windows. You can drag and drop from the KDE desktop or Konqueror file browser to add or extract files, or you can use the ark menus.

314

CHAPTER 13

Backing Up

FIGURE 13.2 Here, the contents of a .zip file containing some pictures are displayed.

As long as the associated command-line programs are installed, ark can work with tar, gzip, bzip2, zip, and lha files (the latter four being compression methods used to save

space by compaction of the archived files). Existing archives are opened after launching the application itself. You can add files and directories to the archive or delete them from the archive, as shown in Figure 13.3. After opening the archive, you can extract all of its contents or individual files. You can also perform searches using patterns (all *.jpg files, for example) to select files.

FIGURE 13.3 Adding files to ark is a matter of selecting them in the usual Open File dialog. Here, several files are being selected to add to the new archive.

Choosing New from the File menu creates new archives. You then type the name of the archive, providing the appropriate extension (.tar, .gz, and so on), and then proceed to add files and directories as you desire.


315

Using the Amanda Backup Application Provided with Ubuntu, Amanda is a powerful, network backup application created by the University of Maryland at College Park. Amanda is a robust backup and restore application best suited to unattended backups with an autoloading tape drive of adequate capacity. It benefits from good user support and documentation. Amanda’s features include compression and encryption. It is intended for use with highcapacity tape drives, floptical, CD-R, and CD-RW devices.

CAUTION Amanda does not support dump images larger than a single tape and requires a new tape for each run. If you forget to change a tape, Amanda continues to attempt backups until you insert a new tape, but those backups will not capture the data as you intended them to. Do not use too small a tape or forget to change a tape, or you will not be happy with the results.

There is no GUI interface for Amanda. Configuration is done in the time-honored UNIX tradition of editing text configuration files located in /etc/amanda. The default installation in Ubuntu includes a sample cron file because it is expected that you will be using cron to run Amanda regularly. The client utilities are installed with the package am-utils; the Amanda server must be obtained from the Amanda website. As far as backup schemes are concerned, Amanda calculates an optimal scheme on-the-fly and schedules it accordingly. It can be forced to adhere to a traditional scheme, but other tools are possibly better suited for that job. The man page for Amanda (the client is amdump) is well written and useful, explaining both the configuration of Amanda as well as detailing the several programs that actually make up Amanda. The configuration files found in /etc/amanda are well commented; they provide a number of examples to assist you in configuration. The program’s home page is http://www.amanda.org. There, you will find information on subscribing to the mail list, as well as links to Amanda-related projects and a FAQ.

13

Amanda uses GNU tar and dump; it is intended for unattended, automated tape backups, and is not well-suited for interactive or ad hoc backups. The support for tape devices in Amanda is robust, and file restoration is relatively simple. Although Amanda does not support older Macintosh clients, it will use Samba to back up Microsoft Windows clients, as well as any UNIX client that can use GNU tools (which includes Mac OS X). Because Amanda runs on top of standard GNU tools, file restoration can be made using those tools on a recovery disk even if the Amanda server is not available. File compression can be done on either the client or server, thus lightening the computational load on less powerful machines that need backing up.

316

CHAPTER 13

Backing Up

Alternative Backup Software Commercial and other freeware backup products do exist; BRU and Veritas are good examples of effective commercial backup products. Here are some useful free software backup tools that are not installed with Ubuntu: . flexbackup—This backup tool is a large file of Perl scripts that makes dump and restore easier to use. flexbackup’s command syntax can be accessed by using the command with the -help argument. It also can use afio, cpio, and tar to create and restore archives locally or over a network using rsh or ssh if security is a concern. Its home page is http://www.flexbackup.org/. . afio—This tool creates cpio-formatted archives, but handles input data corruption better than cpio (which does not handle data input corruption very well at all). It supports multi-volume archives during interactive operation and can make compressed archives. If you feel the need to use cpio, you might want to check out afio at http://freshmeat.net/projects/afio/. . cdbackup—Designed for the home or small office user, cdbackup will work with any backup and will restore software that can read from stdin, write to stdout, and can handle linear devices such as tape drives. It makes it easier to use CD-Rs as the storage medium. Similar applications are available elsewhere as well; the home page for this application is at http://www.muempf.de/index.html. Many other alternative backup tools exist, but covering all of them is beyond the scope of this book. Two good places to look for free backup software are Freshmeat (http://www. freshmeat.net) and Google (http://www.google.com/linux).

Copying Files Often, when you have only a few files that you need to protect from loss or corruption, it might make better sense to simply copy the individual files to another storage medium rather than to create an archive of them. You can use the tar, cp, rsync, or even the cpio commands to do this, as well as a handy file management tool known as mc. Using tar is the traditional choice because older versions of cp did not handle symbolic links and permissions well at times, causing those attributes (characteristics of the file) to be lost; tar handled those file attributes in a better manner. cp has been improved to fix those problems, but tar is still more widely used. rsync has recently been added to Ubuntu and is an excellent choice for mirroring sets of files, especially when done over a network. To illustrate how to use file copying as a backup technique, the examples here show how to copy (not archive) a directory tree. This tree includes symbolic links and files that have special file permissions we need to keep intact.

Copying Files

317

Copying Files Using tar One choice for copying files into another location would be to use the tar command where you would create a tar file that would be piped to tar to be uncompressed in the new location. To accomplish this, first change to the source directory. Then, the entire command resembles sudo tar cvf - files | (cd target_directory ; tar xpf -)

Here is how the command shown works: You have already changed to the source directory and executed tar with the cvf - arguments that tell tar to . c—Create an archive. . v—Verbose; lists the files processed so we can see that it is working. . f—The filename of the archive will be what follows. (In this case, it is -.) . - —A buffer; a place to hold our data temporarily. The following tar commands can be useful for creating file copies for backup purposes: . l—Stay in the local file system (so you do not include remote volumes). . atime-preserve—Do not change access times on files, even though you are accessing them now, to preserve the old access information for archival purposes. The contents of the tar file (held for us temporarily in the buffer, which is named -) are then piped to the second expression, which will extract the files to the target directory. In shell programming (refer to Chapter 15, “Automating Tasks”), enclosing an expression in parentheses causes it to operate in a subshell and be executed first. First we change to the target directory, and then . x—Extract files from a tar archive. . p—Preserve permissions. . f—The filename will be -, the temporary buffer that holds the tared files.

Compressing, Encrypting, and Sending tar Streams The file copy techniques using the tar command in the previous section can also be used to quickly and securely copy a directory structure across a LAN or the Internet (using the ssh command). One way to make use of these techniques is to use the following command line to first compress the contents of a designated directory, and then decompress the compressed and encrypted archive stream into a designated directory on a remote host:

13

where files are the filenames you want to include; use * to include the entire current directory.

318

CHAPTER 13

Backing Up

$ tar cvzf - data_folder | ssh remote_host ‘( cd ~/mybackup_dir; tar xvzf - )’

The tar command is used to create, list, and compress the files in the directory named data_folder. The output is piped through the ssh (secure shell) command and sent to the remote computer named remote_host. On the remote computer, the stream is then extracted and saved in the directory named /mybackup_dir. You will be prompted for a password in order to send the stream.

Copying Files Using cp To copy files, we could use the cp command. The general format of the command when used for simple copying is $ cp -a source_directory target_directory

The -a argument is the same as giving -dpR, which would be . -d—Dereferences symbolic links (never follows symbolic links) and copies the files that they point to instead of copying the links. . -p—Preserves all file attributes if possible. (File ownership might interfere.) . -R—Copies directories recursively. The cp command can also be used to quickly replicate directories and retain permissions by using the -avR command-line options. Using these options preserves file and directory permissions, gives verbose output, and recursively copies and re-creates subdirectories. A log of the backup can also be created during the backup by redirecting the standard output like this: sudo cp -avR directory_to_backup destination_vol_or_dir 1>/root/backup_log.txt

or sudo cp -avR ubuntu /test2 1>/root/backup_log.txt

This example makes an exact copy of the directory named /ubuntu on the volume named /test2, and saves a backup report named backup_log.txt under /root.

Copying Files Using mc The Midnight Commander (available in the Universe repository, under the package “mc”; see Chapter 7, “Managing Software” for how to enable the Universe and Multiverse repositories) is a command-line file manager that is useful for copying, moving, and archiving files and directories. The Midnight Commander has a look and feel similar to the Norton Commander of DOS fame. By executing mc at a shell prompt, a dual-pane view of the files is displayed. It contains drop-down menu choices and function keys to manipulate files. It also uses its own virtual file system, enabling it to mount FTP directories and display the contents of tar files, gzipped tar files (.tar.gz or .tgz), bzip files, DEB files, and RPM

System Rescue

319

files, as well as extract individual files from them. As if that was not enough, mc contains a File Undelete virtual file system for ext2/3 partitions. By using cd to “change directories” to an FTP server’s URL, you can transfer files using the FTP protocol. The default font chosen for Ubuntu makes the display of mc ugly when used in a tty console (as opposed to an xterm), but does not affect its performance.

FIGURE 13.4 The Midnight Commander is a highly versatile file tool. If it does not display properly on your screen, launch it with the -a argument to force ASCII mode.

System Rescue There will come a time when you need to engage in system rescue efforts. This need arises when the system will not even start Linux so that you can recover any files. This problem is most frequently associated with the boot loader program or partition table, but it could be that critical system files have been inadvertently deleted or corrupted. If you have been making backups properly, these kinds of system failures are easily, though not quickly, recoverable through a full restore. Still, valuable current data might not have been backed up since the last scheduled backup, and the backup archives are found to be corrupt, incomplete, or missing. A full restore also takes time you might not have. If the problem causing the system failure is simply a damaged boot loader, a damaged partition table, a

13

Figure 13.4 shows a shot of the default dual-panel display. Pressing the F9 key drops down the menu, and pressing F1 displays the Help file. A “feature” in the default GNOME terminal intercepts the F10 key used to exit mc, so use F9 instead to access the menu item to quit, or simply click on the menu bar at the bottom with your mouse. The configuration files are well documented, and it would appear easy to extend the functionality of mc for your system if you understand shell scripting and regular expressions. It is an excellent choice for file management on servers not running X.

320

CHAPTER 13

Backing Up

missing library, or misconfiguration, a quick fix can get the system up and running and the data can then be easily retrieved. In this section, we will first examine a way to back up and restore the boot loader itself or, having failed to do that, restore it by hand. Then we will look at a few alternatives to booting the damaged system so that we can inspect it, fix it, or retrieve data from it.

The Ubuntu Rescue Disc Ubuntu provides a rescue disc hidden in the installation DVD. To use it, insert the disc and reboot the computer, booting from the DVD just as you did when you installed Ubuntu originally. If necessary, you can perform all the operations discussed in this section from rescue mode.

Backing Up and Restoring the Master Boot Record The Master Boot Record (MBR) is the first 512 bytes of a hard disk. It contains the boot loader code in the first 446 bytes and the partition table in the next 64 bytes; the last two bytes identify that sector as the MBR. The MBR can become corrupted, so it makes sense to back it up. This example uses the dd command as root to back up the entire MBR. If the boot loader code changes from the time you make this image and restore the old code, the system will not boot when you restore it all; it is easy enough to keep a boot floppy handy and then re-run LILO if that is what you are using. To copy the entire MBR to a file, use this: sudo dd if=/dev/hda of=/tmp/hdambr bs=512 count=1

To restore the entire MBR, use this: sudo dd if=/tmp/hdambr of=/dev/hda bs=512 count=1

To restore only the partition table, skipping the boot loader code, use this: sudo dd if=/tmp/hdambr of=/dev/hda bs=1 skip=446 count=66

Of course, it would be prudent to move the copy of the MBR to a floppy or other appropriate storage device. (The file is only 512 bytes in size.) You will need to be able to run dd on the system in order to restore it (which means that you will be using the Ubuntu rescue disc as described later, or any equivalent to it).

Booting the System from a Generic Boot Floppy If you failed to make a boot floppy or cannot locate the one you did make, any Linux boot floppy (a slightly older version or one borrowed from a friend) can be pressed into service as long as it has a reasonably similar kernel version. (The major and minor numbers match—for example, 2.6.5 would likely work with any 2.6 system, but not with a 2.4 system.) You would boot your system by manually specifying the root and boot parti-

System Rescue

321

tions as described previously. Although you are almost guaranteed to get some error messages, you might at least be able to get a base system running enough to replace files and recover the system.

TIP

Using a GRUB Boot Floppy The GRand Unified Boot loader (GRUB) can attempt to boot a system from a floppy without a viable custom-made boot floppy. The image for the floppy can be downloaded from ftp://alpha.gnu.org/gnu/grub/grub-0.95-i386-pc.ext2fs and copied to a floppy using dd. (rawrite.exe would be used on a Microsoft system.) Or, if you have a boot floppy from an existing system using GRUB, that one will work as well. GRUB has its own command shell, file system drivers, and search function (much like command completion in the bash shell). It is possible to boot using the GRUB floppy, examine the drive partitions, and search for the kernel and initrd image as well, using them to boot the system. Worthy of a chapter all its own, the GRUB documentation is extensive: In addition to info grub (the info system is similar to the man system for documentation), the GRUB documents contain a tutorial worth reading. The GRUB boot loader is shown in Figure 13.5.

FIGURE 13.5 The GRUB boot loader gives you incredible flexibility in booting even unfamiliar systems.

13

In both preceding cases, it is assumed that you do not need any special file system or device drivers to access the root partition. If you do, add the initrd= argument to the LILO line pointing to the appropriate initrd file on your system. If you do not know the exact name of the initrd file, you are out of luck with LILO, so learn to use a GRUB boot floppy as well.

322

CHAPTER 13

Backing Up

Using the Recovery Facility As your computer starts, Ubuntu will show a message prompting you to press Escape to see the GRUB menu. If you do that, you’ll see a list of bootable operating systems, which will include Recovery Mode options for your Ubuntu install. If you boot into recovery mode, you’ll get automatic root access to your machine where can fix your problems safely. Alternatively, you can insert your Ubuntu installation disc and use the recovery mode from there. Keep in mind that these recovery modes are designed to be text-only systems for serious system recovery purposes; don’t expect them to be hand-held, and don’t expect much in the way of ease of use!

Relevant Ubuntu Commands The following commands are useful in performing backup, recovery, and restore operations in Ubuntu: . amdump—Amanda is a network-based backup system, consisting of 18 separate commands, for use with Linux. . ark—A KDE desktop GUI archiving utility. . cp—The copy command. . scp—The secure shell copy command. . cpio—A data archive utility. . dd—A data copy and conversion utility. . gzip—The GNU compression utility. . tar—The GNU tape archive utility.

Reference . http://www.tldp.org/LDP/solrhe/Securing-Optimizing-Linux-RH-Edition-v1.3/ whywhen.html—A thorough discussion with examples of using dump and restore for backups. . http://en.tldp.org/LDP/solrhe/Securing-Optimizing-Linux-RH-Edition-v1.3/ chap29sec306.html—Making automatic backups with tar using cron. . http://kmself.home.netcom.com/Linux/FAQs/backups.html—The Linux Backups mini FAQ contains some useful, although brief, comments on backup media, compression, encryption, and security. . http://www.tldp.org/—The Linux Documentation Project offers several useful HOWTO documents that discuss backups and disk recovery.

Reference

323

. http://www.ibiblio.org/pub/Linux/docs/HOWTO/other-formats/html_single/ Bootdisk-HOWTO.html#AEN1483—Here is a list of LILO Boot error codes to help you debug a cranky system that will not boot. . http://www.ibiblio.org/pub/Linux/docs/HOWTO/other-formats/html_single/FtapeHOWTO.html—This is a HOWTO for the floppy tape device driver. . http://www.linux-usb.org/USB-guide/x498.html—The USB Guide for mass storage devices. If you have a USB device and need to know if it is supported, check here.

. http://twiki.org/cgi-bin/view/Wikilearn/RsyncingALargeFileBeginner—Rsyncing a large file to “repair” a local ISO image that does not pass the md5sum check. . http://www.lycoris.org/sections.php?op=viewarticle&artid=8—Lycoris ISO rsync mini HOWTO. A step-by-step tutorial on using rsync to sync files. . http://www.mikerubel.org/computers/rsync_snapshots/—Automated snapshot-style backups using rsync. . http://www.mondorescue.org/—Mondo Rescue is a bare-metal backup/rescue tool independent of Ubuntu, using CD, DVD, tape, or NFS; it can produce bootable CDs to restore the system. . http://www.ccp14.ac.uk/ccp14admin/linux-server/mondorescue/dvd_mondo.html— A HOWTO for using MondoRescue to back up on a DVD. . http://www.linuxorbit.com/modules.php?op=modload&name=Sections&file=index &req=viewarticle&artid=222&page=1—A HOWTO using split and mkisofs to manually back up large archives to CD.

13

. http://www.backupcentral.com/amanda.html—This is the Amanda chapter of Unix Backup and Recovery (written by John R. Jackson and published by O’Reilly and Associates). The chapter is available online and covers every aspect of using Amanda. The site features a handy search tool for the chapter.


CHAPTER

14

Networking

IN THIS CHAPTER . Laying the Foundation: The localhost Interface . Networking with TCP/IP . Network Organization . Hardware Devices for Networking

One of the benefits of open source technology in general and Linux is particular is that it can be used effortlessly across several different networking environments as well as the Internet. With strong support for the standard internet protocol TCP/IP, Linux can also talk to all of the UNIX flavors, including Mac OS X, Windows (with the help of Samba), NetWare (IPX) and even older protocols such as DECNET and Banyan Vines. Many organizations use Linux as an Internet gateway, allowing many different clients to access the Internet through Linux, as well as communicate via email and instant messaging. Most important is its builtin support for IPv6, which should start to see a significant uptake through 2009. It’s safe to say that whatever networking protocol you’ll come across, Linux will be able to work with it in some way. This chapter covers network and Internet connectivity, as most networks invariably end up connected to the Internet in some shape or form. You will learn about how to get the basics right, including configuration and management of network cards (NICs) and other network services with Ubuntu. You will also find out how to manage network services from the command line—again an important lesson in case you are ever confined to a command prompt. We will also look at connectivity options, both for inbound and outbound network traffic and the importance of PPP (Point to Point Protocol). Also included is an overview of graphical network management clients for Ubuntu, which are becoming more and more popular.

. Using Network Configuration Tools . Dynamic Host Configuration Protocol . Wireless Networking . Beyond the Network and onto the Internet . Common Configuration Information . Configuring Digital Subscriber Line Access . Configuring Dial-Up Internet Access . Troubleshooting Connection Problems . Reference

326

CHAPTER 14

Networking

Laying the Foundation: The localhost Interface The first thing that needs to be in place before you can successfully connect to a network or even to the Internet is a localhost interface, sometimes also called a loopback interface, but more commonly referenced as lo. The TCP/IP protocol (see “Networking with TCP/IP” later on in this chapter) uses this interface to assign an IP address to your computer and is needed for Ubuntu to establish a PPP interface.

Checking for the Availability of the Loopback Interface You should not normally have to manually create a loopback interface as Ubuntu creates one automatically for you during installation. To check that one is set up, you can use the ifconfig command to show something similar to this: $ ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:13 errors:0 dropped:0 overruns:0 frame:0 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:832 (832.0 b) TX bytes:832 (832.0 b)

What you see in this example is evidence that the loopback interface is present and active. The inet addr is the IP number assigned to the localhost, typically 127.0.0.1 along with the broadcast mask of 255.255.255.0 and that there has been little activity on this interface (RX = receive and TX = transmit). If your output does not look like the one above, you must hand-configure the localhost interface after you finish the rest of this section. You can also see the Ipv6 address that is assigned to lo, which is ::1/128, referred to as the inet6 addr.

Configuring the Loopback Interface Manually The localhost interface’s IP address is specified in a text configuration file that is used by Ubuntu to keep record of various network wide IP addresses. The file is called /etc/hosts and usually exists on a system, even if it is empty. The file is used by the Linux kernel and other networking tools to enable them to access local IP addresses and hostnames. If you have not configured any other networking interfaces then you may find that the file looks something like this: 127.0.0.1 localhost 127.0.0.1 hardy-laptop # The following lines are desirable for IPv6 capable hosts ::1

ip6-localhost ip6-loopback

Laying the Foundation: The localhost Interface

327

fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters

Each networked Ubuntu machine on a LAN will use this same IP address for its localhost. If for some reason a Ubuntu computer does not have this interface, edit the /etc/hosts file to add the localhost entry, and then use the ifconfig and route commands using your sudo permissions to create the interface like this: $ sudo /sbin/ifconfig lo 127.0.0.1 $ sudo /sbin/route add 127.0.0.1 lo

These commands will create the localhost interface in memory (all interfaces, such as eth0 or ppp0, are created in memory when using Linux), and then add the IP address 127.0.0.1 to an internal (in-memory) table so that the Linux kernel’s networking code can keep track of routes to different addresses. Use the ifconfig command as shown previously to test the interface. You should now be able to use ping to check that the interface is responding properly like this (using either localhost or its IP address): $ ping -c 3 localhost PING localhost (127.0.0.1) 56(84) bytes of data. 64 bytes from localhost (127.0.0.1): icmp_seq=1 ttl=64 time=0.036 ms 64 bytes from localhost (127.0.0.1): icmp_seq=2 ttl=64 time=0.028 ms 64 bytes from localhost (127.0.0.1): icmp_seq=3 ttl=64 time=0.028 ms --- localhost ping statistics --3 packets transmitted, 3 received, 0% packet loss, time 1999ms rtt min/avg/max/mdev = 0.028/0.030/0.036/0.007 ms

The -c option is used to set the number of pings, and the command, if successful (as it was previously), returns information regarding the round-trip speed of sending a test packet to the specified host.

14

The first line defines the special localhost interface and assigns it an IP address of 127.0.0.1. You might hear or read about terms such as localhost, loopback, and dummy interface; all these terms refer to the use of the IP address 127.0.0.1. The term loopback interface indicates that to Linux networking drivers, it looks as though the machine is talking to a network that consists of only one machine; the kernel sends network traffic to and from itself on the same computer. Dummy interface indicates that the interface doesn’t really exist as far as the outside world is concerned; it exists only for the local machine.

328

CHAPTER 14

Networking

The second line in the /etc/hosts file uses the actual hostname of the computer and assigns it to a similar private IP address that is unique to that computer. In the earlier code example, you can see that 127.0.1.1 is assigned to hardy-laptop, which is the computer on which that hosts file resides. The remaining lines are used for IPv6 and can be ignored with the exception of the line that begins ::1—this is used to define the localhost connection for IPv6, which you can text with the ping6 command at the terminal like so: $ ping6 ::1 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.037 ms 64 bytes from ::1: icmp_seq=2 ttl=64 time=0.045 ms 64 bytes from ::1: icmp_seq=3 ttl=64 time=0.048 ms --- ::1 ping statistics --3 packets transmitted, 3 received, 0% packet loss, time 1998ms rtt min/avg/max/mdev = 0.037/0.043/0.048/0.007 ms

Networking with TCP/IP The basic building block for any network based on Unix hosts is the Transport Control Protocol/Internet Protocol (TCP/IP) suite of three protocols. The suite consists of the Internet Protocol (IP), Transport Control Protocol (TCP), and Universal Datagram Protocol (UDP). IP is the base protocol. The TCP/IP suite is packet-based, which means that data is broken into little chunks on the transmit end for transmission to the receiving end. Breaking data up into manageable packets allows for faster and more accurate transfers. In TCP/IP, all data travels via IP packets, which is why addresses are referred to as IP addresses. It is the lowest level of the suite. TCP is also a connection-based protocol. Before data is transmitted between two machines, a connection is established between them. When a connection is made, a stream of data is sent to the IP to be broken into the packets that are then transmitted. At the receiving end, the packets are put back in order and sent to the proper application port. TCP/IP forms the basis of the Internet; without it the Internet would be a very different place indeed, if it even existed! On the other hand, UDP is a connectionless protocol. Applications using this protocol just choose their destination and start sending. UDP is normally used for small amounts of

Networking with TCP/IP

329

data or on fast and reliable networks. If you are interested in the internals of TCP/IP, see the “Reference” section at the end of this chapter for places to look for more information.

Ubuntu and Networking Chances are that your network card was configured during the installation of Ubuntu. You can however, use the ifconfig command at the shell prompt or Ubuntu’s graphical network configuration tools, such as network-admin, to edit your system’s network device information or to add or remove network devices on your system. Hundreds of networking commands and utilities are included with Ubuntu—far too many to cover in this chapter and more than enough for coverage in two or three volumes.

After reading this chapter, you might want to learn more about other graphical network clients for use with Linux. The GNOME ethereal client, for example, can be used to monitor all traffic on your LAN or specific types of traffic. Another client, NmapFE, can be used to scan a specific host for open ports and other running services.

TCP/IP Addressing To understand networking with Linux, you need to know the basics of TCP/IP addressing. Internet IP addresses (also known as public IP addresses) are different from those used internally on a local area network, or LAN. Internet IP addresses are assigned (for the United States and some other hosts) by the American Registry for Internet Numbers, available at http://www.arin.net/. Entities that need an Internet address apply to this agency to be assigned an address. The agency assigns Internet service providers (ISPs) one or more blocks of IP addresses, which the ISPs can then assign to their subscribers. You will quickly recognize the current form of TCP/IP addressing, known as IPv4 (IP version 4). In this method, a TCP/IP address is expressed of a series of four decimal numbers—a 32-bit value expressed in a format known as dotted decimal format, such as 192.168.0.1. Each set of numbers is known as an octet (eight ones and zeros, such as 10000000 to represent 128) and ranges from zero to 255. The first octet usually determines what class the network belongs to. There are three classes of networks. The classes are . Class A—Consists of networks with the first octet ranging from 1 to 126. There are only 126 Class A networks—each composed of up to 16,777,214 hosts. (If you are doing the math, there are potentially 16,777,216 addresses, but no host portion of

14

Nearly all ethernet cards can be used with Linux, along with many PCMCIA wired and wireless network cards. The great news is that many USB wireless networking devices also work just fine with Linux, and more will be supported with upcoming versions of the Linux kernel. Check the Linux USB Project at http://www.linux-usb.org/ for the latest developments or to verify support for your device.

CHAPTER 14

330

Networking

an address can be all zeros or 255s.) The “10.” network is reserved for local network use, and the “127.” network is reserved for the loopback address of 127.0.0.1. Loopback addressing is used by TCP/IP to enable Linux network-related client and server programs to communicate on the same host. This address will not appear and is not accessible on your LAN.

NOTE Notice that zero is not included in Class A. The zero address is used for network-to-network broadcasts. Also, note that there are two other classes of networks, Classes D and E. Class D networks are reserved for multicast addresses and not for use by network hosts. Class E addresses are deemed experimental, and thus are not open for public addressing.

. Class B—Consists of networks defined by the first two octets with the first ranging from 128 to 191. The “128.” network is also reserved for local network use. There are 16,382 Class B networks—each with 65,534 possible hosts. . Class C—Consists of a network defined by the first three octets with the first ranging from 192 to 223. The “192.” network is another that is reserved for local network use. There are a possible 2,097,150 Class C networks of up to 254 hosts each. No host portion of an IP address can be all zeros or 255s. These addresses are reserved for broadcast addresses. IP addresses with all zeros in the host portion are reserved for network-to-network broadcast addresses. IP addresses with all 255s in the host portion are reserved for local network broadcasts. Broadcast messages are not typically seen by users. These classes are the standard, but a netmask also determines what class your network is in. The netmask determines what part of an IP address represents the network and what part represents the host. Common netmasks for the different classes are . Class A—255.0.0.0 . Class B—255.255.0.0 . Class C—255.255.255.0 Because of the allocation of IP addresses for Internet hosts, it is now impossible to get a Class A network. It is also nearly impossible to get a Class B network (all the addresses have been given out, but some companies are said to be willing to sell theirs), and Class C network availability is dropping rapidly with the continued growth of Internet use worldwide. See the following sidebar.

Networking with TCP/IP

331

Limits of Current IP Addressing The current IPv4 address scheme is based on 32-bit numbering and limits the number of available IP addresses to about 4.1 billion. Many companies and organizations (particularly in the United States) were assigned very large blocks of IP addresses in the early stages of the growth of the Internet, which has left a shortage of “open” addresses. Even with careful allocation of Internet-connected host IP addresses and the use of network address translation (NAT) to provide communication to and from machines behind an Internet-connected computer, the Internet might run out of available addresses.

You can get a good overview of the differences between IPv4 and IPv6 policies regarding IP address assignments, and the registration process of obtaining IP addresses, by browsing to http://www.arin.net/library/index.html. Read the Linux IPv6 HOWTO by browsing to http://tldp.org/HOWTO/Linux+IPv6-HOWTO/. Ubuntu supports the use of IPv6 and includes a number of networking tools conforming to IPv6 addressing. Migration to IPv6 is slow in coming, however, because the majority of computer operating systems, software, hardware, firmware, and users are still in the IPv4 mindset. Supporting IPv6 will require rewrites to many networking utilities, portions of operating systems currently in use, and firmware in routing and firewall hardware.

Using IP Masquerading in Ubuntu Three blocks of IP addresses are reserved for use on internal networks and hosts not directly connected to the Internet. The address ranges are from 10.0.0.0 to 10.255.255.255, or 1 Class A network; from 172.16.0.0 to 172.31.255.255, or 16 Class B networks; and from 192.168.0.0 to 192.168.255.255, or 256 Class C networks. Use these IP addresses when building a LAN for your business or home. Which class you choose can depend on the number of hosts on your network. Internet access for your internal network can be provided by a PC running Ubuntu or other broadband or dial-up router. The host or device is connected to the Internet and is used as an Internet gateway to forward information to and from your LAN. The host

14

To solve this problem, a newer scheme named IPv6 (IP version 6) is being implemented. It uses a much larger addressing solution based on 128-bit addresses, with enough room to include much more information about a specific host or device, such as global positioning server (GPS) or serial numbering. Although the specific details about the entire contents of the an IPv6 address have yet to be finalized, all Internetrelated organizations appear to agree that something must be done to provide more addresses. According to Vint Cerf, one of the primary developers of the TCP/IP protocol, “There will be nearly 2.5 billion devices on the Internet by 2006, and by 2010 half the world’s population will have access to the Internet.”

332

CHAPTER 14

Networking

should also be used as a firewall to protect your network from malicious data and users while functioning as an Internet gateway. A PC used in this fashion typically has at least two network interfaces. One is connected to the Internet with the other connected to the computers on the LAN (via a hub or switch). Some broadband devices also incorporate four or more switching network interfaces. Data is then passed between the LAN and the Internet using network address translation, or NAT, better known in Linux circles as IP masquerading.

NOTE Do not rely on a single point of protection for your LAN, especially if you use wireless networking, provide dial-in services, or allow mobile (laptop or PDA) users internal or external access to your network. Companies, institutions, and individuals relying on a “moat mentality” have often discovered to their dismay that such an approach to security is easily breached. Make sure that your network operation is accompanied by a security policy that stresses multiple levels of secure access, with protection built into every server and workstation—something easily accomplished when using Linux.

Ports Most servers on your network have more than one task. For example, web servers have to serve both standard and secure pages. You might also be running an FTP server on the same host. For this reason, applications are provided ports to use to make “direct” connections for specific software services. These ports help TCP/IP distinguish services so that data can get to the correct application. If you check the file /etc/services, you will see the common ports and their usage. For example, for FTP, HTTP, and Post Office Protocol (email retrieval server), you will see ftp

21/tcp

http pop3

80/tcp 110/tcp

http pop-3

# WorldWideWeb HTTP # POP version 3

The ports defined in /etc/services in this example are 21 for FTP, 80 for HTTP, and 110 for POP3. Other common port assignments are 25 for simple mail transport protocol (SMTP) and 22 for secure shell (SSH) remote login. Note that these ports are not set in stone, and you can set up your server to respond to different ports. For example, although port 22 is listed in /etc/services as a common default for SSH, the sshd server can be configured to listen on a different port by editing its configuration file /etc/ssh/sshd_config. The default setting (commented out with a pound sign) looks like this: #Port 22

Edit the entry to use a different port, making sure to select an unused port number, such as Port 2224

Network Organization

333

Save your changes, and then restart the sshd server. (Refer to Chapter 11, “Automating Tasks,” to see how to restart a service.) Remote users must now access the host through port 2224, which can be done using ssh’s -p (port) option like so: $ ssh -p 2224 remote_host_name_or_IP

Network Organization

Subnetting Within Class A and B networks, there can be separate networks called subnets. Subnets are considered part of the host portion of an address for network class definitions. For example, in the 128. Class B network, you can have one computer with an address of 128.10.10.10 and another with an address of 128.10.200.20; these computers are on the same network (128.10.), but they have different subnets (128.10.10. and 128.10.200.). Because of this, communication between the two computers requires either a router or a switch. Subnets can be helpful for separating workgroups within your company. Often subnets can be used to separate workgroups that have no real need to interact with or to shield from other groups’ information passing among members of a specific workgroup. For example, if your company is large enough to have its own HR department and payroll section, you could put those departments’ hosts on their own subnet and use your router configuration to limit the hosts that can connect to this subnet. This configuration prevents networked workers who are not members of the designated departments from being able to view some of the confidential information the HR and payroll personnel work with. Subnet use also enables your network to grow beyond 254 hosts and share IP addresses. With proper routing configuration, users might not even know they are on a different subnet from their co-workers. Another common use for subnetting is with networks that cover a wide geographic area. It is not practical for a company with offices in Chicago and London to have both offices on the same subnet, so using a separate subnet for each office is the best solution.

14

Properly organizing your network addressing process grows more difficult as the size of your network grows. Setting up network addressing for a Class C network with fewer than 254 devices is simple. Setting up addressing for a large, worldwide company with a Class A network and many different users can be extremely complex. If your company has fewer than 254 hosts (meaning any device that requires an IP address, including computers, printers, routers, switches, and other devices) and all your workgroups can share information, a single Class C network will be sufficient.

334

CHAPTER 14

Networking

Subnet Masks Subnet masks are used by TCP/IP to show which part of an IP address is the network portion and which part is the host. Subnet masks are usually referred to as netmasks. For a pure Class A network, the netmask would be 255.0.0.0; for a Class B network, the netmask would be 255.255.0.0; and for a Class C network, the netmask would be 255.255.255.0. Netmasks can also be used to deviate from the standard classes. By using customized netmasks, you can subnet your network to fit your needs. For example, your network has a single Class C address. You have a need to subnet your network. Although this is not possible with a normal Class C subnet mask, you can change the mask to break your network into subnets. By changing the last octet to a number greater than zero, you can break the network into as many subnets as you need. For more information on how to create customized subnet masks, see Day 6, “The Art of Subnet Masking,” in Sams Teach Yourself TCP/IP Network Administration in 21 Days. That chapter goes into great detail on how to create custom netmasks and explains how to create an addressing cheat sheet for hosts on each subnet. You can also browse to the Linux Network Administrator’s Guide and read about how to create subnets at http:/ /www.tldp.org/LDP/nag2/index.html.

Broadcast, Unicast, and Multicast Addressing Information can get to systems through three types of addresses: unicast, multicast, and broadcast. Each type of address is used according to the purpose of the information being sent, as explained here: . Unicast—Sends information to one specific host. Unicast addresses are used for Telnet, FTP, SSH, or any other information that needs to be shared in a one-to-one exchange of information. Although it is possible that any host on the subnet/network can see the information being passed, only one host is the intended recipient and will take action on the information being received. . Multicasting—Broadcasts information to groups of computers sharing an application, such as a video conferencing client or online gaming application. All the machines participating in the conference or game require the same information at precisely the same time to be effective. . Broadcasting—Transmits information to all the hosts on a network or subnet. Dynamic Host Configuration Protocol (DHCP) uses broadcast messages when the DHCP client looks for a DHCP server to get its network settings, and Reverse Address Resolution Protocol (RARP) uses broadcast messages for hardware address to IP address resolution. Broadcast messages use .255 in all the host octets of the network IP address. (10.2.255.255 will broadcast to every host in your Class B network.)

Hardware Devices for Networking

335

Hardware Devices for Networking As stated at the beginning of this chapter, networking is one of the strong points of the Linux operating system. This section covers the classes of devices used for basic networking. Note that this section talks about hardware devices, and not Linux networking devices, which are discussed in the section, “Using Network Configuration Tools.”

Network Interface Cards A computer must have a network interface card (NIC) to connect to a network. Currently, there are several topologies (ways of connecting computers) for network connections. These topologies range from the old and mostly outdated 10BASE-2 to the much newer and popular wireless Wi-Fi or 802.11 networking.

This section covers some of the different types of NIC used to connect to your network. Token Ring Token ring networking was developed by IBM. As the name implies, the network is set up in a ring. A single “token” is passed from host to host, indicating the receiving host’s permission to transmit data. Token ring has a maximum transfer rate of 16Mbps (16 million bits per second). Unlike 10BASE-2 and 10BASE-5, token ring uses what is called unshielded twisted pair (UTP) cable. This cable looks a lot like the cable that connects your phone to the wall. Almost all token ring NICs are recognized by Linux. 10BASE-T 10BASE-T was the standard for a long time. A large number of networks still use it. 10BASE-T also uses UTP cable. Instead of being configured in a ring, 10BASE-T mostly uses a star architecture. In this architecture, the hosts all connect to a central location (usually a hub, which you learn about later in the section titled “Hubs and Switches”). All the data is sent to all hosts, but only the destination host takes action on individual packets. 10BASE-T has a transfer rate of 10Mbps. 10BASE-T has a maximum segment length of 100 meters. There are many manufacturers of 10BASE-T NICs, and most are recognized by Ubuntu. 100BASE-T 100BASE-T was popular around the turn of the millennium, keeping the same ease of administration as 10BASE-T while increasing the speed by a factor of 10. For most

14

Each NIC has a unique address (the hardware address, known as media access control, or MAC), which identifies that NIC. This address is six pairs of hexadecimal bits separated by colons (:). A MAC address looks similar to this: 00:60:08:8F:5A:D9. The hardware address is used by DHCP (see “Dynamic Host Configuration Protocol” later in this chapter) to identify a specific host. It is also used by the Address Resolution Protocol (ARP) and Reverse Address Resolution Protocol (RARP) to map hosts to IP addresses.

336

CHAPTER 14

Networking

networks, the step from 10BASE-T to 100BASE-T is as simple as replacing NICs and hubs. Most 100BASE-T NICs and hubs can also handle 10BASE-T and can automatically detect which is in use. This allows for a gradual network upgrade and usually does not require rewiring your whole network. Nearly every known 100BASE-T NIC and most generic NICs are compatible with Linux, thanks to Donald Becker of http://www.scyld.com/. 100BASE-T requires category 5 unshielded twisted pair cabling. 1000BASE-T 1000BASE-T—usually referred to as gigabit ethernet—is the accepted standard in enterprise networking, with most NICs being detected and configured correctly by Ubuntu. Like 100BASE-T NICs, gigabit NICs automatically downgrade if they are plugged in to a slower network. Also like 100BASE-T, gigabit NICs require category 5 unshielded twisted pair cabling; however, many institutions are now deploying category 6 cables because they have much longer range and so are often worth the extra cost. You will find that many newer computers tend to be fitted with gigabit NICs as standard. Fiber Optic and Gigabit Ethernet Fiber optic is more commonly used in newer and high-end installations because the cost of upgrading can be prohibitive for older sites. Fiber optics were originally used on fiber distributed data interface (FDDI) networks, similar to token ring in structure except that there are two rings—one is primary, whereas the other is secondary. The primary ring is used exclusively, and the secondary sits idle until there is a break in the primary ring. At this point, the secondary ring takes over, keeping the network alive. FDDI has a speed of 100Mbps and has a maximum ring length of 62 miles. FDDI uses several tokens at the same time that, along with the faster speed of fiber optics, account for the drastic increase in network speed. As stated, switching to a fiber optic network can be very costly. To make the upgrade, the whole network has to be rewired (as much as U.S. $150 per network connection), and all NICs must be replaced at the same time. Most FDDI NICs are recognized by Linux. Fiber-related gigabit is termed 1000BASE-X, whereas 1000BASE-T gigabit ethernet uses twisted-pair (see the “Unshielded Twisted Pair” section, later in this chapter). Wireless Network Interfaces Wireless networking, as the name states, works without network cables and is an extremely popular option, particularly for those whose spouses do not like wires trailing everywhere! Upgrading is as easy as replacing network cards and equipment, such as routers and switches. Wireless networking equipment can also work along with the traditional wired networking using existing equipment. It might not be practical to upgrade a desktop or large server to wireless just yet if the wiring is already in place. Wireless networking is still generally slower than a traditional wired network. However, this situation is changing with wider adoption of newer protocols, such as 802.11g (supporting the common 802.11b and faster but less popular 802.11a), along with the introduction of more compliant and inexpensive wireless NICs.


337

Some 802.11g NICs work at up to 108Mbps, which appears faster than 100BASE-T wired networking on the surface. However, in practice, it is a great deal slower: Unless your networking environment has paper-thin walls, you can usually halve the reported speed of Wi-Fi network devices. 108Mbps works about half the speed of 100BASE-T. With each new version of Linux, more and more wireless NICs are compatible. That said, it is usually better to get brand name wireless NICs, because you have a better chance of compatibility. Check the http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/ web page for more specific hardware compatibility information. More on wireless networking is discussed later in this chapter.

Network Cable

Unshielded Twisted Pair Unshielded twisted pair (UTP) uses color-coded pairs of thin copper wire to transmit data. Six categories of UTP exist—each serving a different purpose: . Category 1 (Cat1)—Used for voice transmissions such as your phone. Only one pair is used per line—one wire to transmit and one to receive. An RJ-11 plug is used to connect the cable to your phone and the wall. . Category 2 (Cat2)—Used in early token ring networks. Has a transmission rate of 4Mbps (million bits per second) and has the slowest data transfer rate. An RJ-11 plug is also used for cable connections. . Category 3 (Cat3)—Used for 10BASE-T networks. It has a transmission rate of 10Mbps. Three pairs of cables are used to send and receive signals. RJ-11 or RJ-45 plugs can be used for Cat3 cables, usually deferring to the smaller RJ-11. RJ-45 plugs are similar in design to RJ-11, but are larger to handle up to four pairs of wire and are used more commonly on Cat5 cables. . Category 4 (Cat4)—Used in modern token ring networks. It has a transmission rate of 16Mbps and is less and less common as companies are switching to better alternatives. RJ-45 plugs are used for cable connections. . Category 5 (Cat5)—The fastest of the UTP categories with a transmission rate of up to 1000Mbps. It is used in both 100BASE-T and 1000BASE-T networks and uses four

14

Currently, three types of network cable exist: coaxial, unshielded twisted pair (UTP), and fiber. Coaxial cable (rarely used today) looks a lot like the coaxial cable used to connect your television to the cable jack or antenna. UTP looks a lot like the cable that runs from your phone to the wall jack (the jacks are a bit wider). Fiber cable looks sort of like the RCA cables used on your stereo or like the cable used on your electrical appliances in your house (two separate segments connected together). The following sections discuss UTP and fiber network cable in more detail.

338

CHAPTER 14

Networking

pairs of wire. Cat5 cable came out just as 10BASE-T networks were becoming popular and isn’t much more expensive than Cat3 cable. As a result, most 10BASE-T networks use Cat5 UTP instead of Cat3. Cat5 cable uses RJ-45 plugs. . Category 6 (Cat6)—Also rated at 1000Mbps, this cable is available in two forms: stranded for short runs (25-meter) and solid for up to 100-meter runs, but which should not be flexed. Fiber Optic Cable Fiber optic cable (fiber) is usually orange or red in color. The transmission rate is 100Mbps and has a maximum length of 62 miles. Fiber uses a two-pronged plug to connect to devices. A couple of advantages to fiber are that because it uses light instead of electricity to transmit its signal, it is free from the possibility of electromagnetic interference and is also more difficult to tap into and eavesdrop.

Hubs and Switches Hubs and switches are used to connect several hosts together on a star architecture network. They can have any number of connections; the common sizes are 4, 8, 16, 24, and 48 connections (ports)—each port has a light that comes on when a network connection is made (link light). Their use enables you to expand your network easily; you can just add new hubs or switches when you need to add new connections. Each unit can connect to the other hubs or switches on the network, typically, through a port on the hub or switch called an uplink port. This enables two hubs or switches, connected by their uplink ports, to act as one hub or switch. Having a central location where all the hosts on your network can connect allows for easier troubleshooting of problems. If one host goes down, none of the other hosts are affected (depending on the purpose of the downed host). Because hubs and switches are not directly involved with the Linux operating system, compatibility is not an issue. If you are constructing a small to mid-size network, it is important to consider whether you intend to use either hubs or switches. Hubs and switches are visually the same in that they have rows of network ports. However, under the hood, the difference is quite important. Data is sent as packets of information across the network; with a hub the data is transmitted simultaneously to all the network ports, irrespective of which port the destination computer is attached to. Switches, however, are more intelligent because they can direct packets of information directly to the correct network port that leads to the destination computer. They do this by “learning” the MAC addresses of each computer that is attached to them. In short, using switches minimizes excess packets being sent across the network, thus increasing network bandwidth. In a small network with a handful of computers, the use of hubs might be perfectly acceptable and you will find that hubs are generally cheaper than switches. However, for larger networks of 15 computers or more, you should consider implementing a switched network.


339

TIP Troubleshooting network connections can be a challenge, especially on large networks. If a user complains that he has lost his network connection, the hub or switch is a good place to start. If the link light for the user’s port is lit, chances are the problem is with the user’s network configuration. If the link light is not on, the host’s NIC is bad, the cable is not inserted properly, or the cable has gone bad for some reason.

Routers and Bridges

Bridges Bridges are used within a network to connect different subnets. A bridge blindly relays all information from one subnet to another without any filtering and is often referred to as a dumb gateway. This can be helpful if one subnet in your network is becoming overburdened and you need to lighten the load. A bridge is not very good for connecting to the Internet, however, because it lacks filtering. You really do not want all traffic traveling the Internet to be able to get through to your network.

Routers Routers can pass data from one network to another, and they allow for filtering of data. Routers are best suited to connect your network to an outside network, such as the Internet. If you have a web server for an internal intranet that you do not want people to access from the Internet, for example, you can use a router’s filter to block port 80 from your network. These filters can be used to block specific hosts from accessing the Internet as well. For these reasons, routers are also called smart gateways. Routers range in complexity and price from a Cisco brand router that can cost thousands of dollars to other brands that can be less than a hundred dollars.

Initializing New Network Hardware All the initial network configuration and hardware initialization for Ubuntu is normally done during installation. At times, however, you will have to reconfigure networking on your system, such as when a host needs to be moved to a different subnet or a different network, or if you replace any of your computer’s networking hardware.

14

Routers and bridges are used to connect different networks to your network and to connect different subnets within your network. Routers and bridges both serve the same purpose of connecting networks and subnets, but they do so with different techniques. The information in the following sections will help you choose the connection method that best suits your needs.

340

CHAPTER 14

Networking

Linux creates network interfaces in memory when the kernel recognizes that a NIC or other network device is attached to the system. These interfaces are unlike other Linux interfaces, such as serial communications ports, and do not have a corresponding device file in the /dev directory. Unless support for a particular NIC is built in to your kernel, Linux must be told to load a specific kernel module to support your NIC. More than 100 such modules are located in the /lib/modules/2.6.XX-XX/kernel/net directory (where XX-XX is your version of the kernel). You can initialize a NIC in several ways when using Linux. When you first install Ubuntu, automatic hardware probing detects and configures your system to use any installed NICs. If you remove the original NIC and replace it with a different make and model, your system will not automatically detect and initialize the device unless you configure Ubuntu to use automatic hardware detection when booting. Ubuntu should detect the absence of the old NIC and the presence of the new NIC at boot time. If you do not use automatic hardware detection and configuration, you can initialize network hardware by . Manually editing the /etc/modprobe.conf file to prompt the system to recognize and support the new hardware upon reboot . Manually loading or unloading the new device’s kernel module with the modprobe command The following sections explain the first and last of the preceding methods. Editing the /etc/modprobe.conf File This file may not be present when you first look for it, so you may need to create a blank file in a text editor. You can manually edit the /etc/modprobe.conf file to add a module dependency entry (also known as a directive) to support a new NIC or other network device. This entry includes the device’s name and its corresponding kernel module. After you add this entry, the Linux kernel recognizes your new networking hardware upon reboot. Ubuntu runs a module dependency check upon booting. For example, if your system uses a RealTek NIC, you could use an entry like this: alias eth0 8139too

The example entry tells the Linux kernel to load the 8139too.o kernel module to support the eth0 network device. On the other hand, if you have an Intel Ethernet Pro NIC installed, you would use an entry like this: alias eth0 eepro100

Other parameters can be passed to a kernel module using one or more option entries, if need be, to properly configure your NIC. See the modprobe.conf man page for more information on using entries. For more specifics regarding NIC kernel modules, examine the module’s source code because no man pages exist (a good opportunity for anyone willing to write the documentation).


341

TIP Linux kernel and network tools can be used to diagnose problems or troubleshoot problematic NICs. However, if you browse to Don Becker’s Linux Ethercard Status, Diagnostic and Setup Utilities page at http://www.scyld.com/ethercard_diag.html, you will find more than two dozen hardware-specific utilities for a variety of PCI and legacy ISA Ethernet network cards. These tools can be extremely helpful if you run into trouble during NIC recognition or configuration. Using modprobe to Manually Load Kernel Modules You do not have to use an /etc/modprobe.conf entry to initialize kernel support for your new network device. As root (using sudo), you can manually load or unload the device’s kernel module using the modprobe command, along with the module’s name. For example, use the following command line to enable the example RealTek NIC:

After you press Enter, you will see this device reported from the kernel’s ring buffer messages, which can be displayed by the dmesg command. Here’s a portion of that command’s output: $ dmesg ... eth0: RealTek RTL8139 Fast Ethernet at 0xce8ee000, 00:30:1b:0b:07:0d, IRQ 11 eth0: Identified 8139 chip type ‘RTL-8139C’ eth0: Setting half-duplex based on auto-negotiated partner ability 0000. ...

Note that at this point, an IP address or other settings have not been assigned to the device. Linux can use multiple ethernet interfaces, and the first ethernet device will be numbered eth0, the second eth1, and so on. Each different ethernet device recognized by the kernel might have additional or different information reported, depending on its kernel module. For example, $ dmesg ... eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drive rs/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin ➥<[email protected]> and others PCI: Found IRQ 10 for device 00:0d.0

eth0: Intel Corporation 82557 [Ethernet Pro 100], 00:90:27:91:92:B5, IRQ 10. Board assembly 721383-007, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed.

14

$ sudo modprobe 8139too

342

CHAPTER 14

Networking

ROM checksum self-test: passed (0x04f4518b). ...

In this example, an Intel Ethernet Pro 100 NIC has been recognized. To disable support for a NIC, the kernel module can be unloaded, but usually only after the device is no longer in use. Read the next section to learn how to configure a NIC after it has been recognized by the Linux kernel and how to control its behavior.

Using Network Configuration Tools If you add or replace networking hardware after your initial installation, you must configure the new hardware. You can do so using either the command line or the graphical configuration tools. To configure a network client host using the command line, you can use a combination of commands or edit specific files under the /etc directory. To configure the hardware through a graphical interface, you can use Ubuntu’s graphical tool for X called network-admin. This section introduces command-line and graphical software tools you can use to configure a network interface and network settings on your Ubuntu system. You’ll see how to control your NIC and manage how your system interacts with your network. Using the command-line configuration tools can seem difficult if you are new to Linux. For anyone new to networking, the network-admin graphical tool is the way to go. Both manual and graphical methods require root access to work. If you do not have root access, get it before trying any of these actions. You should not edit any scripts or settings files used by graphical network administration tools on your system. Your changes will be lost the next time the tool, such as network-admin, is run! Either use a manual approach and write your own network setup script, or stick to using graphical configuration utilities.

Command-Line Network Interface Configuration You can configure a network interface from the command line using the basic Linux networking utilities. You configure your network client hosts with the command line by using commands to change your current settings or by editing a number of system files. Two commands, ifconfig and route, are used for network configuration. The netstat command displays information about the network connections. /sbin/ifconfig ifconfig is used to configure your network interface. You can use it to . Activate or deactivate your NIC or change your NIC’s mode . Change your machine’s IP address, netmask, or broadcast address . Create an IP alias to allow more than one IP address on your NIC . Set a destination address for a point-to-point connection You can change as many or as few of these options as you’d like with a single command. The basic structure for the command is as follows: ifconfig [network device] options

Using Network Configuration Tools

343

Table 14.1 shows a subset of ifconfig options and examples of their uses.

TABLE 14.1 ifconfig Options Use

Option

Example

Create alias

–[network device]

ifconfig eth0:0_:[number] 10.10.10.10

Change IP address

ifconfig eth0 10.10.10.12

Change the netmask

netmask [netmask]

fconfig eth0 netmask 255.255.255.0

Change the broadcast

broadcast [address]

–ifconfig eth0 broadcast

down

ifconfig eth0 down

Bring interface up up (add IP address)

–ifconfig eth0 up (ifconfig eth0

Set NIC promiscuous

[-]promisc

ifconfig eth0 promisc mode on

[ifconfig eth0 promisc]

[off]

[-]allmulti

ifconfig eth0_on [off]

10.10.10.10)

Set multicasting mode

allmulti [ifconfig eth0 -allmulti]

Enable [disable] [address]

[-]pointopoint

ifconfig_point-to-point address

eth0_pointopoint

10.10.10.20 [ifconfig eth0 pointopoint_10.10.10.20]

The ifconfig man page shows other options that enable your machine to interface with a number of network types such as AppleTalk, Novell, IPv6, and others. Again, read the man page for details on these network types.

NOTE Promiscuous mode causes the NIC to receive all packets on the network. It is often used to sniff a network. Multicasting mode enables the NIC to receive all multicast traffic on the network.

14

Take interface down

10.10.10.255

344

CHAPTER 14

Networking

If no argument is given, ifconfig displays the status of active interfaces. For example, the output of ifconfig, without arguments and one active and configured NIC, looks similar to this: $ ifconfig

eth0

Link encap:Ethernet HWaddr 00:0F:EA:B2:53:85 inet addr:192.168.2.5 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::20f:eaff:feb2:5385/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:471 errors:0 dropped:0 overruns:0 frame:0 TX packets:695 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:160637 (156.8 KiB) TX bytes:86193 (84.1 KiB) Interrupt:185 Base address:0x6000

lo

Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:19 errors:0 dropped:0 overruns:0 frame:0 TX packets:19 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1336 (1.3 KiB) TX bytes:1336 (1.3 KiB)

The output is easily understood. The inet entry displays the IP address for the interface. UP signifies that the interface is ready for use, BROADCAST denotes that the interface is connected to a network that supports broadcast messaging (ethernet), RUNNING means that the interface is operating, and LOOPBACK shows which device (lo) is the loopback address. The maximum transmission unit (MTU) on eth0 is 1500 bytes. This determines the size of the largest packet that can be transmitted over this interface (and is sometimes “tuned” to other values for performance enhancement). Metric is a number from 0 to 3 that relates to how much information from the interface is placed in the routing table. The lower the number, the smaller the amount of information. The ifconfig command can be used to display information about or control a specific interface using commands as listed in Table 14.1. For example, to deactivate the first Ethernet device on a host, use the ifconfig command, the interface name, and the command down like so: $ sudo ifconfig eth0 down

You can also configure and activate the device by specifying a hostname or IP address and network information. For example to configure and activate (“bring up”) the eth0 interface with a specific IP address, use the ifconfig command like this: $ sudo ifconfig eth0 192.168.2.9 netmask 255.255.255.0 up


345

If you have a host defined in your system’s /etc/hosts file (see the section “Network Configuration Files” later in this chapter), you can configure and activate the interface according to the defined hostname like this: $ sudo ifconfig eth0 dogdog.hudson.com up

Read the next section to see how to configure your system to work with your LAN.

$ route [options] [commands] [parameters]

To display the routing table, use the route command with no options. The display will look similar to this: $ route Kernel IP routing table Destination Gateway 192.168.2.0 * default .

Genmask 255.255.255.0 0.0.0.0

Flags Metric Ref U 0 0 UG 0 0

Use Iface 0 eth0 0 eth0

In the first column, Destination is the IP address (or, if the host is in /etc/hosts or /etc/networks, the hostname) of the receiving host. The default entry is the default gateway for this machine. The Gateway column lists the gateway that the packets must go through to reach their destination. An asterisk (*) means that packets go directly to the host. Genmask is the netmask. The Flags column can have several possible entries. In our example, U verifies that the route is enabled and G specifies that Destination requires the use of a gateway. The Metric column displays the distance to the Destination. Some daemons use this to figure the easiest route to the Destination. The Ref column is used by some UNIX flavors to convey the references to the route. It isn’t used by Linux. The Use column indicates the number of times this entry has been looked up. Finally, the Iface column is the name of the interface for the corresponding entry. Using the -n option to the route command will give the same information, substituting IP addresses for names and asterisks (*), and looks like this: # /sbin/route -n Kernel IP routing table Destination 192.168.2.0

Gateway 0.0.0.0

Genmask 255.255.255.0

Flags Metric Ref U 0 0

0.0.0.0

192.168.2.1

0.0.0.0

UG

0

0

Use Iface 0 eth0 0 eth0

The route command can add to the table using the add option. With the add option, you can specify a host (-host) or a network (-net) as the destination. If no option is used, the

14

/sbin/route The second command used to configure your network is the route command. route is used to build the routing tables (in memory) implemented for routing packets as well as displaying the routing information. It is used after ifconfig has initialized the interface. route is normally used to set up static routes to other networks via the gateway or to other hosts. The command configuration is like this:

346

CHAPTER 14

Networking

route command assumes that you are configuring the host issuing the command. The

most common uses for the route command are to add the default gateway for a host, for a host that has lost its routing table, or if the gateway address has changed. For example, to add a gateway with a specific IP address, you could use the following: $ sudo route add default gw 149.112.50.65

Note that you could use a hostname instead of an IP address if desired. Another common use is to add the network to the routing table right after using the ifconfig command to configure the interface. Assuming that the 208.59.243.0 entry from the previous examples was missing, replace it using the following command: $ sudo route add -net 208.59.243.0 netmask 255.255.255.0 dev eth0

You also can use route to configure a specific host for a direct (point-to-point) connection. For example, say that you have a home network of two computers. One of the computers has a modem through which it connects to your business network. You typically work at the other computer. You can use the route command to establish a connection through specific hosts using the following command: $ sudo route add -host 198.135.62.25 gw 149.112.50.65

The preceding example makes the computer with the modem the gateway for the computer you are using. This type of command line is useful if you have a gateway or firewall connected to the Internet. There are many additional uses for the route command, such as manipulating the default packet size. See the man page for those uses. /bin/netstat The netstat command is used to display the status of your network. It has several parameters that can display as much or as little information as you prefer. The services are listed by sockets (application-to-application connections between two computers). You can use netstat to display the information in Table 14.2.

TABLE 14.2 netstat Options Option Output -g

Displays the multicast groups configured

-i

Displays the interfaces configured by ifconfig

-s

Lists a summary of activity for each protocol

-v

Gives verbose output, listing both active and inactive sockets

-c

Updates output every second (good for testing and troubleshooting)

-e

Gives verbose output for active connections only

-C

Displays information from the route cache and is good for looking at past connections


347

Several other options are available for this command, but they are used less often. As with the route command, the man page can give you details about all options and parameters.

Network Configuration Files As previously stated, five network configuration files can be modified to make changes to basic network interaction of your system. The files are . /etc/hosts—A listing of addresses, hostnames, and aliases . /etc/services—Network service and port connections . /etc/nsswitch.conf—Linux network information service configuration . /etc/resolv.conf—Domain name service domain (search) settings

After these files are modified, the changes are active. As with most configuration files, comments can be added with a hash mark (#) preceding the comment. All of these files have a man page written about them for more information. Adding Hosts to /etc/hosts The /etc/hosts file is a map of IP to hostnames. If you are not using DNS or another naming service, and you are connected to a large network, this file can get quite large and can be a real headache to manage. A small /etc/hosts file can look something like this: 127.0.0.1 127.0.1.1

localhost optimus

# The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts

The first entry is for the loopback entry. The second is for the name of the machine. If no naming service is in use on the network, the only host that myhost will recognize by name is yourhost. (IP addresses on the network can still be used.) Service Settings in /etc/services The /etc/services file maps port numbers to services. The first few lines look similar to this (the /etc/services file can be quite long, more than 500 lines): # Each line describes one service, and is of the form: # # service-name port/protocol [aliases ...]

[# comment]

14

. /etc/host.conf—Network information search order (by default, /etc/hosts and then DNS)

348

CHAPTER 14

Networking

tcpmux tcpmux

1/tcp 1/udp

# TCP port service multiplexer # TCP port service multiplexer

rje rje

5/tcp 5/udp

# Remote Job Entry # Remote Job Entry

echo echo discard discard systat

7/tcp 7/udp 9/tcp 9/udp 11/tcp

sink null sink null users

Typically, there are two entries for each service because most services can use either TCP or UDP for their transmissions. Usually after /etc/services is initially configured, you will not need to change it. Using /etc/nsswitch.conf After Changing Naming Services This file was initially developed by Sun Microsystems to specify the order in which services are accessed on the system. A number of services are listed in the /etc/nsswitch.conf file, but the most commonly modified entry is the hosts entry. A portion of the file can look like this: passwd: group: shadow:

compat compat compat

hosts: networks:

files dns mdns files

protocols: services: ethers: rpc:

db db db db

netgroup:

nis

files files files files

This tells services that they should consult standard Unix/Linux files for passwd, shadow, and group (/etc/passwd, /etc/shadow, /etc/group, respectively) lookups. For host lookups, the system checks /etc/hosts and if there is no entry, it checks DNS. The commented hosts entry lists the possible values for hosts. Edit this file only if your naming service has changed. Setting a Name Server with /etc/resolv.conf /etc/resolv.conf is used by DNS, the domain name service. The following is an example of resolv.conf: nameserver 192.172.3.8 nameserver 192.172.3.9 search mydomain.com


349

This sets the nameservers and the order of domains for DNS to use. The contents of this file will be set automatically if you use Dynamic Host Configuration Protocol, or DHCP (see the section on “Dynamic Host Configuration Protocol” later in this chapter). Setting DNS Search Order with /etc/host.conf The /etc/host.conf file lists the order in which your machine will search for hostname resolution. The following is the default /etc/host.conf file: order hosts, bind

Using Graphical Configuration Tools Ubuntu has made some big improvements to how desktop users may configure networking using graphical configuration tools. For most people, all you will need to know is contained in Chapter 2, "Post-Installation Configuration," in the section about Network Manager. For others, you may configure your network connections by right clicking the networking icon on your top panel and choosing "Edit Connections.." from the menu as in Figure 14.1. From the Network Connections window that opens, you may select from various types of connections to configure; Wired, Wireless, Mobile Broadband, VPN and DSL as in Figure 14.2. By default, each is set to auto configure and most users will never need to change the settings available here. For those who require doing so, choosing the appropriate tab and clicking the "Add" button will give the opportunity to configure and fine tune settings as needed, such as in the wireless connection example in Figure 14.3. . .

FIGURE 14.1 Use network-admin to configure your network devices.

14

In this example, the host checks the /etc/hosts file first and then performs a DNS lookup. A couple more options control how the name service is used. The only reason to modify this file is if you use NIS for your name service or you want one of the optional services. The nospoof option can be a good option for system security. It compares a standard DNS lookup to a reverse lookup (host-to-IP then IP-to-host) and fails if the two don’t match. The drawback is that often when proxy services are used, the lookup fails, so you want to use this with caution.

350

CHAPTER 14

Networking

FIGURE 14.2 Highlight an existing entry, and then click the Properties button to change /etc/hosts entries in the Hosts tab of the Network Configuration screen.

FIGURE 14.3 Assign a static IP address to a network interface.

Dynamic Host Configuration Protocol

351

Dynamic Host Configuration Protocol As its name implies, Dynamic Host Configuration Protocol (DHCP) configures hosts for connection to your network. DHCP allows a network administrator to configure all TCP/IP parameters for each host as he connects to the network after activation of a NIC. These parameters include automatically assigning an IP address to a NIC, setting name server entries in /etc/resolv.conf, and configuring default routing and gateway information for a host. This section first describes how to use DHCP to obtain IP address assignment for your NIC, and then how to quickly set up and start a DHCP server using Ubuntu.

NOTE You can learn more about DHCP by reading RFC2131 “Dynamic Host Configuration Protocol.” Browse to http://www.ietf.org/rfc/rfc2131.txt.

14

How DHCP Works DHCP provides persistent storage of network parameters by holding identifying information for each network client that might connect to the network. The three most common pairs of identifying information are . Network subnet/host address—Used by hosts to connect to the network at will . Subnet/hostname—Enables the specified host to connect to the subnet . Subnet/hardware address—Enables a specific client to connect to the network after getting the hostname from DHCP DHCP also allocates to clients temporary or permanent network (IP) addresses. When a temporary assignment, known as a lease, elapses, the client can request to have the lease extended, or, if the address is no longer needed, the client can relinquish the address. For hosts that will be permanently connected to a network with adequate addresses available, DHCP allocates infinite leases.

352

CHAPTER 14

Networking

DHCP offers your network some advantages. First, it shifts responsibility for assigning IP addresses from the network administrator (who can accidentally assign duplicate IP addresses) to the DHCP server. Second, DHCP makes better use of limited IP addresses. If a user is away from the office for whatever reason, the user’s host can release its IP address for use by other hosts. Like most things in life, DHCP is not perfect. Servers cannot be configured through DHCP alone because DNS does not know what addresses that DHCP assigns to a host. This means that DNS lookups are not possible on machines configured through DHCP alone; therefore, services cannot be provided. However, DHCP can make assignments based on DNS entries when using subnet/hostname or subnet/hardware address identifiers.

NOTE The problem of using DHCP to configure servers using registered hostnames is being addressed by Dynamic DNS which, when fully developed, will enable DHCP to register IP addresses with DNS. This will allow you, for example, to register a domain name (such as imalinuxuser.com) and be able to easily access that domain’s web server without needing to use static IP addressing of a specific host. The largest hurdle to overcome is the security implication of enabling each host connecting to the system to update DNS. A few companies, such as http://www.dyndns.org/, are already offering Dynamic DNS services and have clients for Linux.

Activating DHCP at Installation and Boot Time Ubuntu automatically defaults your network interfaces to using DHCP, as it is the simplest way of setting up a network interface. With dynamic, or DHCP-assigned IP addressing schemes for your NIC, the broadcast address is set at 255.255.255.255 because dhclient, the DHCP client used for IP configuration, is initially unaware of where the DHCP server is located, so the request must travel every network until a server replies. The instruction to use DHCP for your NIC can be found under /etc/network/interfaces, with a line that says dhcp. Other settings specific to obtaining DHCP settings are saved in the file named dhclient.conf under the /etc/dhcp3/dhclient.conf directory and are documented in the dhclient.conf man page. More than 100 options are also documented in the dhcpoptions man page. However, using DHCP is not that complicated. If you want to use DHCP and know that there is a server on your network, you can quickly configure your NIC by using the dhclient like so: # dhclient Internet Systems Consortium DHCP Client V3.0.6 Copyright 2004-2007 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/


353

SIOCSIFFLAGS: No such file or directory SIOCSIFFLAGS: No such file or directory Listening on LPF/eth1/00:11:50:3c:fe:21 Sending on LPF/eth1/00:11:50:3c:fe:21

bound to 192.168.0.7 — renewal in 118148 seconds.

In this example, the first ethernet device, eth0, has been assigned an IP address of 192.168.0.7 from a DHCP server at 192.168.0.1. The renewal will take place in about 33 hours.

DHCP Software Installation and Configuration Installation of the DHCP client and server is fairly straightforward, mainly because Ubuntu already includes dhclient in a default installation, but also because installing software is easy using synaptic or apt-get. DHCP dhclient DHCP is automatically enabled when you install Ubuntu, so you don’t need to worry about having to enable it. The DHCP client, dhclient, sends a broadcast message that the DHCP server replies to with networking information for your host. Once it has this, you’re done! You can however, fine-tune how dhclient works, and where and how it obtains or looks for DHCP information. You probably will not need to take this additional effort; but if you do, you can create and edit a file named dhclient.conf, and save it in the /etc directory with your settings.

CAUTION You shouldn’t just go ahead and overwrite your dhclient.conf with any old file, as it could lead you to painful networking problems. Instead, copy the file like so: sudo cp /etc/dhcp3/dhclient.conf/ etc/dhcp3/dhclient.conf.backup

That way, if anything goes wrong, you can then copy it back to restore the original settings.

14

Listening on LPF/eth0/00:0f:ea:b2:53:85 Sending on LPF/eth0/00:0f:ea:b2:53:85 Sending on Socket/fallback receive_packet failed on eth1: Network is down DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 7 send_packet: Network is down DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPOFFER from 192.168.0.1 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPACK from 192.168.0.1

354

CHAPTER 14

Networking

A few of the dhclient.conf options include . timeout time ;—How long to wait before giving up trying (60 seconds is the default) . retry time ;—How long to wait before retrying (five minutes is the default) . select-timeout time ;—How long to wait before selecting a DHCP offer (zero seconds is the default) . reboot time ;—How long to wait before trying to get a previously set IP (10 seconds is the default) . renew date ;—When to renew an IP lease, where date is in the form of <weekday> /<month>/ :<minute>:<second>, such as 4 2004/1/1 22:01:01 for Thursday, January 4, 2004 at 10:01 p.m. See the dhclient.conf man page for more information on additional settings. DHCP Server Again, the easiest way to install the DHCP server on your computer is to use either synaptic or apt-get to retrieve the dchp3-server package. If you are so inclined, you can go to the Internet Software Consortium (ISC) website and download and build the source code yourself (http://www.isc.org/). If you decide to install from a source downloaded from the ISC website, the installation is very straightforward. Just unpack your tar file, run ./configure from the root of the source directory, run make, and finally, if there are no errors, run make install. This puts all the files used by the DHCP daemon in the correct places. If you have the disk space, it is best to leave the source files in place until you are sure that DHCP is running correctly; otherwise, you can delete the source tree.

NOTE For whichever installation method you choose, be sure that a file called /etc/dhcp3/dhcpd.leases is created. The file can be empty, but it does need to exist in order for dhcpd to start properly.

Using DHCP to Configure Network Hosts Configuring your network with DHCP can look difficult, but is actually easy if your needs are simple. The server configuration can take a bit more work if your network is more complex and depending on how much you want DHCP to do. Configuring the server takes some thought and a little bit of work. Luckily, the work involves editing only a single configuration file, /etc/dhcp3/dhcpd.conf. To start the server at boot time, use the service, ntsysv, or bum commands. The /etc/dhcp3/dhcpd.conf file contains all the information needed to run dhcpd. Ubuntu includes a sample dhcpd.conf in /usr/share/doc/dhcp*/dhcpd.conf.sample. The DHCP server source files also contain a sample dhcpd.conf file.


355

The /etc/dhcp3/dhcpd.conf file can be looked at as a three-part file. The first part contains configurations for DHCP itself. The configurations include . Setting the domain name—option domain-name “example.org”. . Setting DNS servers—option domain-name-servers ns1.example.org, ns2.example.org (IP addresses can be substituted.) . Setting the default and maximum lease times—default-lease-time 3600 and max-lease-time 14400. Other settings in the first part include whether the server is the primary (authoritative) server and what type of logging DHCP should use. These settings are considered defaults and can be overridden by the subnet and host portion of the configuration in more complex situations.

The dhcpd.conf file requires semicolons (;) after each command statement. If your configuration file has errors or runs improperly, check for this.

The next part of the dhcpd.conf deals with the different subnets that your DHCP server serves; this section is quite straightforward. Each subnet is defined separately and can look like this: subnet 10.5.5.0 netmask 255.255.255.224 { range 10.5.5.26 10.5.5.30; option domain-name-servers ns1.internal.example.org; option domain-name “internal.example.org”; option routers 10.5.5.1; option broadcast-address 10.5.5.31; default-lease-time 600; max-lease-time 7200; }

This defines the IP addressing for the 10.5.5.0 subnet. It defines the IP address ranging from 10.5.5.26 through 10.5.5.30 to be dynamically assigned to hosts that reside on that subnet. This example shows that any TCP/IP option can be set from the subnet portion of the configuration file. It shows which DNS server the subnet will connect to, which can be good for DNS server load balancing, or which can be used to limit the hosts that can be reached through DNS. It defines the domain name, so you can have more than one domain on your network. It can also change the default and maximum lease time. If you want your server to ignore a specific subnet, the following entry can be used to accomplish this: subnet 10.152.187.0 netmask 255.255.255.0 { }

14

NOTE

356

CHAPTER 14

Networking

This defines no options for the 10.152.187.0 subnet; therefore, the DHCP server ignores it. The last part of your dhcp.conf is for defining hosts. This can be good if you want a computer on your network to have a specific IP address or other information specific to that host. The key to completing the host section is to know the hardware address of the host. As you learned in “Hardware Devices for Networking,” earlier in this chapter, the hardware address is used to differentiate the host for configuration. Your hardware address can be obtained by using the ifconfig command as described previously. The hardware address is on the eth0 line labeled ”Hwaddr”. host prowl { hardware ethernet 08:00:07:26:c0:a5; fixed-address prowl.hudson.com; }

This example takes the host with the hardware address 08:00:07:26:c0:a5 and does a DNS lookup to assign the IP address for prowl.hudson.com to the host. DHCP can also define and configure booting for diskless clients like this: host bumblebee { hardware ethernet 0:0:c0:5d:bd:95; filename “vmunix.bumblebee”; server-name “optimus.hudson.com”; }

The diskless host bumblebee will get its boot information from server optimus.hudson. com and use vmunix.bumblebee kernel. All other TCP/IP configuration can also be included.

CAUTION Remember, only one DHCP server should exist on a local network to avoid problems. Your DHCP might not work correctly on a LAN with hosts running outdated legacy operating systems. Often Windows NT servers will have the Windows DHCP server installed by default. Because there is no configuration file for NT to sort through, that DHCP server configures your host before the Linux server if both machines are on the same LAN. Check your NT servers for this situation and disable DHCP on the NT server; afterward, your other DHCP-enabled hosts should configure correctly. Also, check to make sure that there are no conflicts if you use a cable or DSL modem, wireless access point (WAP), or other intelligent router on your LAN that can provide DHCP.

Wireless Networking

357

Other Uses for DHCP A whole host of options can be used in dhcpd.conf: Entire books are dedicated to DHCP. The most comprehensive book is The DHCP Handbook, available at http://www.dhcp-handbook.com/. You can define NIS domains, configure NETBIOS, set subnet masks, and define time servers, or many other types of servers—to name a few of the DHCP options you can use. The preceding example will get your DHCP server and client up and running. The DHCP server distribution contains an example of the dhcpd.conf file that you can use as a template for your network. The file shows a basic configuration that can get you started with explanations for the options used.

Wireless Networking

Support for Wireless Networking in Ubuntu The Linux kernel that ships with Ubuntu provides extensive support for wireless networking. Related wireless tools for configuring, managing, or displaying information about a wireless connection include . iwconfig—Sets the network name, encryption, transmission rate, and other features of a wireless network interface . iwlist—Displays information about a wireless interface, such as rate, power level, or frequency used . iwpriv—Uses i to set optional features, such as roaming, of a wireless network interface . iwspy—Shows wireless statistics of a number of nodes Support varies for wireless devices, but most modern (that is, post-2005) wireless devices should work with Ubuntu. In general, Linux wireless device software (usually in the form of a kernel module) support the creation of an ethernet device that can be managed by traditional interface tools such as ifconfig—with wireless features of the device managed by the various wireless software tools. For example, when a wireless networking device is first recognized and initialized for use, the driver will most likely report a new device: zd1211rw 5-4:1.0: firmware version 4725

14

As stated earlier, Linux has had support for wireless networking since the first standards were developed in the early 1990s. With computers getting smaller and smaller, the uses for wireless networking increased; meanwhile, the transmission speeds are increasing all the time. There are several different ways to create a wireless network. The following sections introduce you to several Linux commands you can use to initialize, configure, and manage wireless networking on your Ubuntu system.

358

CHAPTER 14

Networking

zd1211rw 5-4:1.0: zd1211b chip 050d:705c v4810 \ high 00-17-3f AL2230_RF pa0 g—NS zd1211rw 5-4:1.0: eth2 usbcore: registered new interface driver zd1211rw

This output (from the dmesg command) shows that the eth2 device has been reported. If DHCP is in use, the device should automatically join the nearest wireless subnet and be automatically assigned an IP address. If not, the next step is to use a wireless tool such as iwconfig to set various parameters of the wireless device. The iwconfig command, along with the device name (eth2 in this example), will show the status: $ iwconfig eth2 eth2 IEEE 802.11b/g ESSID:”SKY35120” Nickname:”zd1211” Mode:Managed Frequency:2.462 GHz \ Access Point: 00:18:4D:06:8E:2A Bit Rate=24 Mb/s Encryption key:0EFD-C1AF-5C8D-B2C6-7A89-3790-07A7-AC64-0AB5\ -C36E-D1E9-A230-1DB9-D227-2EB6-D6C8 Security mode:open Link Quality=100/100 Signal level=82/100 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0

This example shows a 24Mbps connection to a network named SKY35120. To change a parameter, such as the transmission rate, use a command-line option with the iwconfig command like so: $ sudo iwconfig eth0 rate 11M

Other options supported by the iwconfig command include essid, used to set the NIC to connect to a specific network by named; mode, used to enable the NIC to automatically retrieve settings from an access point or connect to another wireless host; or freq, to set a frequency to use for communication. Additional options include channel, frag, enc (for encryption), power, and txpower. Details and examples of these options are in the iwconfig manual page. You can then use the ifconfig command or perhaps a graphical Ubuntu tool to set the device networking parameters, and the interface will work as on a hardwired LAN. One handy output of the iwconfig command is the link quality output, which can be used in shell scripts or other graphical utilities for signal monitoring purposes.

Advantages of Wireless Networking Advantages of wireless networking are its mobility and potential range. If you have a large enough antenna network, your network can stretch many miles. This would be an expensive network, but one that would easily break out of the brick and mortar confines of the office.

Wireless Networking

359

Wireless networking would also be a great advantage to college campuses to eliminate the need to tear through walls to install cabling because more and more students expect to have a network connection in their dorm rooms. Wireless networking cards are very reasonable in price and can easily be issued to each student as he requires them. Home networkers can also benefit from wireless networking. For those who cannot do wired network modifications to their homes, wireless networking removes the unsightly wires running along baseboards and ceilings that are required to connect computers in different rooms. With a wireless home network, you are not even confined to inside the house. Depending on the transmit power of your router, you can sit out in your backyard and watch clouds drifting by as you type away. Choosing the right types of wireless devices is an important decision. The next sections discuss some of the basic differences between current protocols used for wireless networking.

The Institute of Electrical and Electronics Engineers (IEEE) started to look seriously at wireless networking in 1990. This is when the 802.11 Standard was first introduced by the Wireless Local Area Networks Standards Working Group. The group based the standard roughly around the architecture used in cellular phone networks. The wireless network is controlled by a base station, which can be just a transmitter attached to the network or, more commonly these days, a router. Larger networks can use more than one base station. Networks with more than one base station are usually referred to as distribution systems. A distribution system can be used to increase coverage area and support roaming of wireless hosts. You can also employ external omnidirectional antennas to increase coverage area, or if required, use point-to-point, or directional antennas to connect distant computers or networks. Right now, the least expensive wireless Linux networks are built using devices (such as access points or NICs) supporting 802.11b, although the faster 802.11g devices tend to get more shelf space. Devices are starting to appear marketed as Pre-N, meaning that they implement a draft standard, while the IEEE carry on debating the full N standard. Significantly more power throughput and range are promised by hardware that supports Pre-N, but this specification has yet to be formally agreed upon and is still some time off. An early standard, 802.11a, offers greater transmission rates than 802.11b, and a number of 802.11a wireless NICs are available (some products provide up to 72Mbps, but will not work with 802.11b devices). Wireless networking devices based on 802.11g, which has the speed improvement of 802.11a and is compatible with 802.11b, are becoming more widely available. Other wireless protocols include Bluetooth, which provides up to 720Kbps data transfers. Bluetooth is intended for short-range device communications (such as for a printer) and supports a typical range of only 10 meters. Bluetooth is unlike IrDA, which requires line-of-sight (devices that are aimed at each other). Bluetooth use conflicts with 802.11 networks because it also uses the 2.4GHz band. You can find out more by browsing to http://www.bluetooth.com/.

14

Choosing from Among Available Wireless Protocols

360

CHAPTER 14

Networking

The 802.11 standard specifies that wireless devices use a frequency range of 2400–2483.5MHz. This is the standard used in North America and Europe. In Japan, however, wireless networks are limited to a frequency range of 2471MHz–2479MHz because of Japanese regulations. Within these ranges, each network is given up to 79 nonoverlapping frequency channels to use. This reduces the chance of two closely located wireless networks using the same channel at the same time. It also allows for channel hopping, which can be used for security.

Beyond the Network and onto the Internet Ubuntu supports Internet connections and the use of Internet resources in many different ways. You will find a wealth of Internet-related software included with this book’s version of Ubuntu, and you can download hundreds of additional free utilities from a variety of sources. To use them, you must have a working Internet connection. In this section, you learn how to set up an Internet connection in Ubuntu using a modem and Point-to-Point Protocol (PPP) as well as other connection methods, including Digital Subscriber Line (DSL) and cable modem services. Just a few years ago, getting a dial-up connection working was difficult—hence, an entire chapter of this book was devoted to it. Nowadays, as long as you have a hardware modem, dial-up configuration is simple. The Ubuntu developers and the wider Linux community have made great progress in making connectivity easier. Although many experienced Linux users continue to use manual scripts to establish their Internet connectivity, new users and experienced system administrators alike will find Ubuntu’s graphical network configuration interface, the Internet Connection Wizard, much easier to use. You learn how to use the Internet Connection Wizard in this chapter, as well as how to configure Ubuntu to provide dial-in PPP support. The chapter also describes how to use Roaring Penguin’s DSL utilities for managing connectivity through a cable modem connection.

Common Configuration Information Although Ubuntu enables great flexibility in configuring Internet connections, that flexibility comes at the price of an increase in complexity. To configure Internet connectivity in Ubuntu, you must know more about the details of the connection process than you can learn from the information typically provided by your Internet service provider (ISP). In this section of the chapter, you learn what to ask about and how to use the information. Some ISPs are unaware of Linux or unwilling to support its use with their service. Fortunately, that attitude is rapidly changing, and the majority of ISPs offer services using standard protocols that are compatible with Linux, even if they (or their technical support people) aren’t aware that their own ISPs are Linux-friendly. You just need to press a little for the information you require.

Common Configuration Information

361

If you are using a dial-up modem account (referred to in Linux as PPP for the Point-toPoint Protocol it uses), your ISP will provide your computer with a static or dynamic IP (Internet Protocol) address. A dynamic IP address changes each time you dial in, whereas a static IP address remains the same. The ISP also might automatically provide your computer with the names of the Domain Name Service (DNS) servers. You need to know the telephone number that your computer will dial in to for making the connection; your ISP supplies that number, too. You will also need a working modem and need to know the device name of the modem (usually /dev/modem).

NOTE

If you are using DSL access or a cable modem, you might have a dynamic IP provided through DHCP, or you might be assigned a static IP. You might automatically be provided with the names of the DNS servers if you use DHCP, or you might have to set up DNS manually (in which case, you have to know the IP addresses of the DNS servers). In all cases, you have to know your username, your password, and for the configuration of other services, the names of the mail servers and the news server. This information can be obtained from your ISP if you specifically ask for it.

14

Most IP addresses are dynamically assigned by ISPs; ISPs have a pool of addresses, and you get whatever address is available. From the ISP’s viewpoint, a small number of addresses can serve a large number of people because not everyone will be online at the same time. For most Internet services, a dynamic IP works well because it is the ISP’s job to route that information to you, and it sits in the middle—between you and the service you want to use. But a dynamic IP address changes, and if someone needs to find you at the same address (if you run a website or a file transfer site, for example), an IP that changes every time you log on will not work well. For that, you need a static IP. Because your ISP cannot reuse that IP with its other customers, it will likely charge you more for a static IP than a dynamic IP. The average consumer doesn’t need the benefit of a static IP, so he is happy paying less for a dynamically assigned IP. Also, the DNS information can be provided automatically by the ISP by the Dynamic Host Configuration Protocol, or DHCP.

362

CHAPTER 14

Networking

NOTE The information in this book will help you understand and avoid many connection issues, but you might experience connection problems. Keep the telephone number of the technical help service for your ISP on hand in case you are not able to establish a connection. But be aware that few ISPs offer Linux support, and you might need to seek help from a Linux-savvy friend or a Linux user’s group if your special circumstances cannot be handled from the knowledge you gain from this book. Of course, the best place to look is on the Internet. Use Google’s Linux page (http://www.google. com/linux/) to research the problem and see if any other users have found fixes or workarounds.

Configuring Digital Subscriber Line Access Ubuntu also supports the use of a digital subscriber line (DSL) service. Although it refers to the different types of DSL available as xDSL, that name includes ADSL, IDSL, SDSL, and other flavors of DSL service; they can all be configured using the Internet Connection Wizard. DSL service generally provides 256Kbps to 24Mbps transfer speeds and transmits data over copper telephone lines from a central office to individual subscriber sites (such as your home). Many DSL services provide asymmetric speeds with download speeds greater than upload speeds.

NOTE DSL service is an “always-on” type of Internet service, although you can turn off the connection under Ubuntu using the network configuration tool found under System, Administration, Network. An always-on connection exposes your computer to malicious abuse from crackers who trawl the Internet attempting to gain access to other computer systems. In addition to the capability to turn off such connections, Ubuntu is also preconfigured to not listen on any network ports, which means that any attempts to gain access to your computer will fail as Ubuntu will reject the request. This is the Ubuntu equivalent of putting up a 12-foot steel fence surrounding your computer.

Configuring Digital Subscriber Line Access

363

A DSL connection requires that you have an ethernet network interface card (sometimes a USB interface that is not easily supported in Linux) in your computer or notebook. Many users also configure a gateway, firewall, or other computer with at least two network interface cards in order to share a connection with a LAN. We looked at the hardware and protocol issues earlier on in this chapter. Advanced configuration of a firewall or router, other than what was addressed during your initial installation of Ubuntu, is beyond the scope of this book.

Understanding Point-to-Point Protocol over Ethernet

NOTE ADSL modems were frequently supplied by ISPs when they originally started to roll out ADSL services. Nowadays however, these modems are optional, which is a good thing as many people choose to purchase a router with an in-built modem to create a dedicated connection. Using a router can save many headaches and will allow you to easily connect more than one computer to an Internet connection. Note that if you are using a cable connection then they usually come with an ethernet cable, in which case you just need a router. Check with your ISP before buying to ensure that whatever router you do end up with can be supported by them. You might find that your ISP even supplies a router as part of the package!

14

Establishing a DSL connection with an ISP providing a static IP address is easy. Unfortunately, many DSL providers use a type of PPP protocol named Point-to-Point Protocol over Ethernet (PPPoE) that provides dynamic IP address assignment and authentication by encapsulating PPP information inside ethernet frames. Roaring Penguin’s rppppoe clients are available from the Roaring Penguin site (www.roaringpenguin.com/ penguin/pppoe/rp-pppoe-3.8.tar.gz), and these clients make the difficult-to-configure PPPoE connection much easier to deal with. You can download and install newer versions (see the Roaring Penguin link in the “Reference” section at the end of this chapter).

364

CHAPTER 14

Networking

Configuring a PPPoE Connection Manually You should only need to use these steps if you are using a modem supplied by your ISP, and not a router. The basic steps involved in manually setting up a DSL connection using Ubuntu involve connecting the proper hardware, and then running a simple configuration script if you use rp-pppoe from Roaring Penguin. First, connect your DSL modem to your telephone line, and then plug in your ethernet cable from the modem to your computer’s network interface card. If you plan to share your DSL connection with the rest of your LAN, you need at least two network cards— designated eth0 (for your LAN) and eth1 (for the DSL connection). The following example assumes that you have more than one computer and will share your DSL connection on a LAN. First, log in as root, and ensure that your first eth0 device is enabled and up (perhaps using the ifconfig command). Next, bring up the other interface, but assign a null IP address like this: $ sudo /sbin/ifconfig eth1 0.0.0.0 up

Now use the adsl-setup command to set up your system. Type the command like this: $ sudo /sbin/adsl-setup

You will be presented with a text script and be asked to enter your username and the Ethernet interface used for the connection (such as eth1). You will then be asked to use “on demand” service or have the connection stay up all the time (until brought down by the root operator). You can also set a timeout in seconds, if desired. You’ll then be asked to enter the IP addresses of your ISP’s DNS servers if you haven’t configured the system’s /etc/resolv.conf file.

Configuring Dial-Up Internet Access

365

After that, you will be prompted to enter your password two times, and have to choose the type of firewall and IP masquerading to use. (You learned about IP masquerading in the “Using IP Masquerading in Ubuntu” section, earlier in this chapter.) The actual configuration is done automatically. Using a firewall is essential nowadays, so you should choose this option unless you intend to craft your own set of firewall rules—a discussion of which is beyond the scope of this book. After you have chosen your firewall and IP masquerading setup, you will be asked to confirm, save, and implement your settings. You are also given a choice to allow users to manage the connection, a handy option for home users. Changes will be made to your system’s /etc/sysconfig/network-scripts/ifcfg-ppp0, /etc/resolv.conf, /etc/ppp/pap-secrets, and /etc/ppp/chap-secrets files. After configuration has finished, use the adsl-start command to start a connection and DSL session, like this:

The DSL connection should be nearly instantaneous, but if problems occur, check to make sure that your DSL modem is communicating with the phone company’s central office by examining the status LEDs on the modem. Because this varies from modem to modem, consult your modem user’s manual. Check to make certain that all cables are properly attached, that your interfaces are properly configured, and that you have entered the correct information to the setup script. If IP masquerading is enabled, other computers on your LAN on the same subnet address (such as 192.168.0.XXX) can use the Internet, but must have the same /etc/resolv.conf name server entries and a routing entry with the DSL-connected computer as a gateway. For example, if the host computer with the DSL connection has an IP address of 192.168.0.1, and other computers on your LAN use addresses in the 192.168.0.XXX range, use the route command on each computer like this: # /sbin/route add default gw 192.168.0.1

14

$ sudo /sbin/adsl-start

366

CHAPTER 14

Networking

Note that you can also use a hostname instead if each computer has an /etc/hosts file with hostname and IP address entries for your LAN. To stop your connection, use the adsl-stop command like this: # /sbin/adsl-stop

Configuring Dial-Up Internet Access Most ISPs provide dial-up connections supporting PPP because it is a fast and efficient protocol for using TCP/IP over serial lines. PPP is designed for two-way networking; TCP/IP provides the transport protocol for data. One hurdle faced by new Ubuntu users is how to set up PPP and connect to the Internet. It is not necessary to understand the details of the PPP protocol in order to use it, and setting up a PPP connection is easy. You can configure the PPP connections manually using the command line or graphically during an X session using Ubuntu’s Network Configuration Tool. Each approach produces the same results. PPP uses several components on your system. The first is a daemon called pppd, which controls the use of PPP. The second is a driver called the high-level data link control (HDLC), which controls the flow of information between two machines. A third component of PPP is a routine called chat that dials the other end of the connection for you when you want it to. Although PPP has many “tunable” parameters, the default settings work well for most people.

Configuring Dial-Up Internet Access

367

Configuring a Dial-Up Connection Manually Ubuntu includes some useful utilities to get your dial-up connection up and running. In this section we will take a look at two options that will have you on the Internet in no time. The first way is to configure a connection using pppconfig, a command line utility to help you to configure specific dial-up connection settings. Enter the following command: $ sudo pppconfig

Before you connect for the first time you need to add yourself to both the dip and dialout groups by using the commands:

Once this has been done it is just a simple matter of issuing the pon command to connect, and the poff command to disconnect. You can create as many different profiles as you need, and can launch specific ones by using the command pon profilename, again using the poff command to disconnect.

CAUTION Many software modems will not work with Linux because the manufacturers will not release programming information about them or provide Linux drivers. An external serial port modem or ISA bus modem will almost always work; USB and PCI modems are still problematic. It is suggested that you do a thorough Google search using your modem’s name and model number to see how others have solved problems with that particular modem. Links to software modem compatibility sites appear at the end of this chapter.

14

$ sudo adduser YOURNAMEHERE dip $ sudo adduser YOURNAMEHERE dialout

368

CHAPTER 14

Networking

Troubleshooting Connection Problems The Linux Documentation Project at http://www.tldp.org/ offers many in-depth resources for configuring and troubleshooting these connections. The Internet search engine Google is also an invaluable tool for dealing with specific questions about these connections. For many other useful references, see the “Reference” section at the end of this chapter. Here are a few troubleshooting tips culled from many years of experience: . If your modem connects and then hangs up, you are probably using the wrong password or dialing the wrong number. If the password and phone number are correct, it is likely an authentication protocol problem. . If you get connected but cannot reach websites, it is likely a domain name resolver problem, meaning that DNS is not working. If it worked yesterday and you haven’t “adjusted” the associated files, it is probably a problem at the ISP’s end. Call and ask. . Always make certain that everything is plugged in. Check again—and again. . If the modem works in Windows, but not in Linux no matter what you do, it is probably a software modem no matter what it said on the box. . If everything just stops working (and you do not see smoke), it is probably a glitch at the ISP or the telephone company. Take a break and give them some time to fix it. . Never configure a network connection when you have had too little sleep or too much caffeine; you will just have to redo it tomorrow.

Reference

369

Related Ubuntu and Linux Commands You will use these commands when managing network connectivity in your Ubuntu system: . dhclient—Automatically acquire, and then set IP info for a NIC . ethereal—GNOME graphical network scanner . firestarter—Ubuntu’s basic graphical firewalling tool for X . ifconfig—Displays and manages Linux networking devices . iwconfig—Displays and sets wireless network device parameters . route—Displays and manages Linux kernel routing table . ssh—The OpenSSH remote-login client and preferred replacement for telnet . network-admin—Ubuntu’s GUI for configuring network connections

14

Reference The following websites and books are great resources for more information on the topics covered in this chapter. Networking is complex. The more you take the time to learn, the easier setting up and maintaining your network will be.

Websites . http://www.ietf.org/rfc.html—Go here to search for, or get a list of, Request for Comments (RFC). . http://www.oth.net/dyndns.html—For a list of Dynamic DNS service providers, go to this site. . http://www.isc.org/products/DHCP/dhcpv3-README.html—The DHCP README is available at this site. . http://www.ieee.org—The Institute of Electrical and Electronics Engineers (IEEE) website. . http://www.mozillaquest.com/Network_02/Wireless_Network_Technology_03_Story01.html—Wireless networking with Red Hat 7.2.

370

CHAPTER 14

Networking

Books . Sams Teach Yourself TCP/IP Network Administration in 21 Days, Sams Publishing, ISBN: 0-672-31250-6 . TCP/IP Network Administration, O’Reilly Publishing, ISBN: 1-56592-322-7 . Practical Networking, Que Publishing, ISBN: 0-7897-2252-6 . Samba Unleashed, Sams Publishing, ISBN: 0-672-31862-8 . The DHCP Handbook, Sams Publishing, ISBN: 0-672-32327-3

CHAPTER

15


IN THIS CHAPTER . Setting Up a Telnet Server . Telnet Versus SSH . Setting Up an SSH Server . The SSH Tools . Remote X

The ability to control your system remotely is one of the high points of Ubuntu—you can connect from any Linux box to another Linux box in a variety of ways. If you just want to check something quickly or if you have limited bandwidth, you have the option of using only the command line, but you can also connect directly to the X server and get full graphical control. Understanding the selection of tools available is largely a history lesson. For example, Telnet was an earlier way of connecting to another computer through the command line, but that has since been superseded by SSH. That is not to say that you should ignore Telnet; you need to know how to use it so you have it as a fallback. However, SSH is preferred because it is more secure. We cover both in this chapter.

Setting Up a Telnet Server You will find the Telnet server installation packages in Synaptic under the telnetd package. Once installed, select Administration, Services and enable Telnet. Note your IP address while you are here (run ifconfig with sudo). With that done, you can now fire up your other Linux box and type telnet . You are prompted to enter your username and password. The whole conversation should look like this: [paul@susannah ~]$ telnet 10.0.0.1 Trying 10.0.0.1... Connected to 10.0.0.1 (10.0.0.1)

. Reference

372

CHAPTER 15


Escape character is ‘^]’. Welcome to Caitlin Running Ubuntu * All access is logged * login: paul Password: Last login: Sat Jul 9 12:05:41 from 10.0.0.5 [paul@caitlin ~]$

TIP Note that the server responds with Welcome to Caitlin, running Ubuntu, which is a customized message. Your machine will probably respond with Ubuntu and some version information. This is insecure: giving away version numbers is never a smart move. In fact, even saying Ubuntu is questionable. Edit the issue and issue.net files in your /etc directory to change these messages.

Running the w command now shows you as connecting from the external IP address.

Telnet Versus SSH Although Telnet is worth keeping around as a fail-safe, last resort option, SSH is superior in virtually every way. Telnet is fast but also insecure. It sends all your text, including your password, in plain text that can be read by anyone with the right tools. SSH, on the other hand, encrypts all your communication and so is more resource-intensive but secure— even a government security agency sniffing your packets for some reason would still have a hard time cracking the encryption. Andy Green, posting to the fedora-list mailing list, summed up the Telnet situation perfectly when he said, “As Telnet is universally acknowledged to encourage evil, the service telnetd is not enabled by default.” It is worthwhile taking the hint: Use Telnet as a last resort only.

Setting Up an SSH Server If not installed already, the OpenSSH server can be installed through Synaptic by adding the openssh-server package. If you have disabled it, you can re-enable it by selecting System, Administration, Services and selecting the Remote Shell Server box. As you might have gathered, sshd is the name for the SSH server daemon.

The SSH Tools

373

Two different versions of SSH exist, called SSH1 and SSH2. The latter is newer, is more secure, comes with more features, and is the default in Ubuntu. Support for SSH1 clients is best left disabled so older clients can connect. This is set up in the /etc/ssh/sshd_config file on this line: #Protocol 2,1

For maximum security, that line should read: Protocol 2

This removes the comment sign (#) and tells sshd that you want it to only allow SSH2 connections. Save the file and exit your editor. The next step is to tell sshd to reread its configuration file, by executing this command: kill –HUP ‘cat /var/run/sshd.pid’

If this returns cat: /var/run/sshd.pid: No such file or directory, it means you didn’t have sshd running. Next time you start it, it reads the configuration file and uses SSH2 only.

ssh -1 localhost

The -1 switch forces SSH1 mode. If you successfully forced the SSH2 protocol, you should get the message Protocol major versions differ: 1 vs. 2.

The SSH Tools To the surprise of many, OpenSSH actually comprises a suite of tools. We have already seen ssh, the secure shell command that connects to other machines, and sshd, the SSH server daemon that accepts incoming SSH connections. However, there is also sftp, a replacement for ftp, and scp, a replacement for rcp. You should already be familiar with the ftp command because it is the lowest-commondenominator system for handling FTP file transfers. Like Telnet, though, ftp is insecure: It sends your data in plain text across the network and anyone can sniff your packets to pick out a username and password. The SSH replacement, sftp, puts FTP traffic over an SSH link, thus securing it. The rcp command might be new to you, largely because it is not used much anymore. Back in its day, rcp was the primary way of copying a single file to another server. As with ftp, scp replaces rcp by simply channeling the data over a secure SSH connection. The difference between sftp and scp is that the former allows you to copy many files, whereas the latter just sends one.

15

You can test this change by trying to connect to your SSH server in SSH1 mode. From the same machine, type this:

374

CHAPTER 15


Using scp to Copy Individual Files Between Machines The most basic use of the scp command is to copy a file from your current machine to a remote machine. You can do that with the following command: scp test.txt 10.0.0.1:

The first parameter is the name of the file you want to send, and the second is the server to which you want to send it. Note that there is a colon at the end of the IP address. This is where you can specify an exact location for the file to be copied. If you have nothing after the colon, as in the previous example, scp copies the file to your home directory. As with SSH, scp prompts you for your password before copying takes place. You can rewrite the previous command so you copy test.txt from the local machine and save it as newtest.txt on the server: scp test.txt 10.0.0.1:newtest.txt

Alternatively, if there is a directory where you want the file to be saved, you can specify it like this: scp test.txt 10.0.0.1:subdir/stuff/newtest.txt

The three commands so far have all assumed that your username on your local machine is the same as your username on the remote machine. If this is not the case, you need to specify your username before the remote address, like this: scp test.txt japhnewtest.txt

You can use scp to copy remote files locally, simply by specifying the remote file as the source and the current directory (.) as the destination: scp 10.0.0.1:remote.txt .

The scp command is nominally also capable of copying files from one remote machine to another remote machine, but this functionality has yet to be properly implemented in Ubuntu. If a patch is released—and we hope one is eventually—the correct command to use would be this: scp 10.0.0.1:test.txt 10.0.0.2:remotetest.txt

That copies test.txt from 10.0.0.1 to remotetest.txt on 10.0.0.2. If this works, you are asked for passwords for both servers.

Using sftp to Copy Many Files Between Machines sftp is a mix between ftp and scp. Connecting to the server uses the same syntax as scp—you can just specify an IP address to connect using your current username, or you can specify a username using username@ipaddress. You can optionally add a colon and a

The SSH Tools

375

directory, as with scp. After you are connected, the commands are the same as ftp: cd, put, mput, get, quit, and so on. In one of the scp examples, we copied a remote file locally. You can do the same thing with sftp with the following conversation: [paul@susannah ~]$ sftp 10.0.0.1 Connecting to 10.0.0.1... [email protected]’s password: sftp> get remote.txt Fetching /home/paul/remote.txt to remote.txt /home/paul/remote.txt 100% 23 0.0KB/s sftp> quit paul@susannah ~]$

00:00

Using ssh-keygen to Enable Key-based Logins There is a weak link in the SSH system, and, inevitably, it lies with users. No matter what lengths system administrators go to in training users to be careful with their passwords, monitors around the world have Post-it notes attached to them with “pAssw0rd” written on. Sure, it has a mix of letters and numbers, but it can be cracked in less than a second by any brute-force method. Brute-forcing is the method of trying every password possibility, starting with likely words (such as password and variants, or god) and then just trying random letters (for example, a, aa, ab, ac, and so on). Even very strong passwords are no more than about 16 characters; such passwords take a long time to brute-force but can still be cracked. The solution is to use key-based logins, which generate a unique, 1024-bit private and public key pair for your machine. These keys take even the fastest computers a lifetime to crack, and you can back them up with a password to stop others from using them. Creating an SSH key is done through the ssh-keygen command, like this: ssh-keygen –t dsa

Press Enter when it prompts you where to save your key, and enter a passphrase when it asks you to. This passphrase is just a password used to protect the key—you can leave it

15

Although FTP remains prominent because of the number of systems that do not have support for SSH (Windows, specifically), SFTP is gaining in popularity. Apart from the fact that it secures all communications between client and server, SFTP is popular because the initial connection between the client and server is made over port 22 through the sshd daemon. Someone using SFTP connects to the standard sshd daemon, verifies himself, and then is handed over to the SFTP server. The advantage to this is that it reduces the attack vectors because the SFTP server cannot be contacted directly and so cannot be attacked as long as the sshd daemon is secure.

376

CHAPTER 15


blank if you want to, but doing so would allow other people to use your account to connect to remote machines if they manage to log in as you. After the key is generated (it might take up to 30 seconds depending on the speed of your machine), change the directory to .ssh (cd ~/.ssh), which is a hidden directory where your key is stored and also where it keeps a list of safe SSH hosts. There you will see the files id_dsa and id_dsa.pub. The first is your private key and should never be given out. The second is your public key, which is safe for distribution. You need to copy the public key to each server you want to connect to via key-based SSH. Using scp, you can copy the public key over to your server, like this: scp id_dsa.pub 10.0.0.1:

This places id_dsa.pub in your home directory on 10.0.0.1. The next step is to SSH into 10.0.0.1 normally and set up that key as an authorized key. So, you can SSH in as yourself and then type touch .ssh/authorized_keys cat id_dsa.pub >> .ssh/authorized_keys chmod 400 .ssh/authorized_keys

The touch command creates the authorized_keys file (if it does not exist already); then you use cat to append the contents of id_dsa.pub to the list of already authorized keys. Finally, chmod is used to make authorized_keys read only. With that done, you can type exit to disconnect from the remote machine and return to your local machine. Then you can try running ssh again. If you are prompted for your passphrase, you have successfully configured key-based authentication. That is the current machine secured, but what about every other machine? It is still possible to log in from another machine using only a password, which means your remote machine is still vulnerable. The solution to this is to switch to root and edit the /etc/ssh/sshd_config file. Look for the PasswordAuthentication line and make sure it reads no (and that it is not commented out with a #). Save the file, and run kill –HUP ‘cat /var/run/sshd.pid’ to have sshd reread its configuration files. With that done, sshd accepts only connections from clients with authorized keys, which stops crackers from brute-forcing their way in.

TIP For extra security, consider setting PermitRootLogin to no in /etc/ssh/sshd_config. When this is set, it becomes impossible to SSH into your machine using the root account—you must connect with a normal user account and then use su or sudo to switch to root. This is advantageous because most brute-force attempts take place on the root account because it is the only account that is guaranteed to exist on a server. Also, even if a cracker knows your user account, she has to guess both your user password and your root password to take control of your system.

Remote X

377

Remote X Everything we have looked at so far has been about command-line remoting, with no mention so far of how to bring up a graphical user interface. There are two ways of doing this in Linux: the X Display Manager Control Protocol (XDMCP) and Virtual Network Computing (VNC). The former is specific to X Windows and is very tightly integrated with the rest of the graphical system but is also very insecure. VNC is more modern and very widespread but insecure in some implementations. Both are being used with Ubuntu, so we will cover both here.

XDMCP Unless you have Ubuntu configured to log in a specific user automatically, you will be familiar with the user login screen that appears at bootup. What you are seeing is the Gnome Display Manager (GDM), which runs your X sessions, checks passwords, and so forth. What you are doing is logging in to the local machine because that is the default configuration.

The solution is to have your powerful machine locked away in a cupboard somewhere with a Wi-Fi connection attached and your quiet thin client sitting in the lounge also on the Wi-Fi link. The thin client connects to the powerful machine and runs all its programs from there, with all the graphics being relayed over the network. With Ubuntu, this is easy to do. Starting with the server side first, select System > Administration > Login Window; then select the Remote tab and change the Style option to “Plain with face browser”. On the client side, go to the same dialog and make sure the Show Actions Menu box is checked from the Local tab. Now, from the client side, log out from your desktop so you return to the Ubuntu login screen. When it prompts you for your username, look for the Options button and select Remote Login with XDMCP. A new dialog box appears with a list of local XDMCP servers that are willing to accept your connection—you should see your server in there. Select it and click Connect; you will see a login screen from that server, inviting you to log in. You will, of course, need a valid account on the server to be able to log in; however, that is the only thing you need. As you can see, because XDMCP is so core to the X Windows system, it is easy to set up. However, as you will find as you use it, XDMCP is very slow—even on a Gigabit Ethernet network, it will chew up a substantial percentage of bandwidth. It is also insecure. Anyone can monitor what you are doing with very little work. Because of these two flaws, XDMCP should never be used outside a trusted network.

15

However, GDM is also equipped to allow other network users to connect to your machine through the XDMCP protocol. There are various reasons for using XDMCP, of which the most popular is that many modern machines are large and noisy. They have big hard drives, CPUs with huge fans, and powerful graphics cards, and so do not fit into a peaceful living room. On the flip side, a thin client (a machine with very little CPU power and no hard disk of its own) is silent but not powerful enough to run Gnome or OpenOffice.org.

378

CHAPTER 15


VNC The next step up from XDMCP is VNC, which was developed at AT&T’s Cambridge Research Laboratory in England. VNC is widespread in the Linux world and, to a lesser extent, in the Windows world. Its main advantage is its widespread nature: Nearly all Linux distros bundle VNC, and clients are available for a wide selection of platforms. To set up VNC, start Synaptic and install the vnc-common and xvncviewer packages. With that done, all that remains is to tell Ubuntu who should be allowed to connect to your session. This is done from the Remote Desktop option on the Preferences menu. By default, your desktop is not shared, so check Allow Other Users to View Your Desktop to share it. You should also check Allow Other Users to Control Your Desktop; otherwise, people will be able to see what you are doing but not interact with the desktop—which is not very helpful. The second set of options on that screen is important. If you are using this as a remote way to connect to your own desktop, deselect Ask You for Confirmation. If this is not done, when you try to connect from your remote location, Ubuntu will pop up a message box on the local machine asking Should this person be allowed to connect? Because you are not there to click Yes, the connection will fail. If you want to let someone else remotely connect to your system, keep this box enabled so you know when people are connecting. You should always enter a password, no matter who it is that will connect. VNC, like XDMCP, should not be considered secure over the Internet, or even on untrusted networks.

Reference . http://www.openssh.com—The home page of the OpenSSH implementation of SSH that Ubuntu uses. It is run by the same team as OpenBSD, a secure BSD-based operating system. . http://www.realvnc.com—The home page of the team that made VNC at AT&T’s Cambridge Research Laboratory. It has since started RealVNC Ltd., a company dedicated to developing and supporting VNC. . http://www.tightvnc.com—Here you can find an alternative to VNC called TightVNC that has several key advances over the stock VNC release. The most important feature is that TightVNC can use SSH for encryption, guaranteeing security. . http://www.nomachine.com/—Another alternative to VNC is in the pipeline, called NX. The free implementation, FreeNX, is under heavy development at the time of writing but promises to work much faster than VNC. One book on SSH that stands out from the crowd is known as “The Snail Book” because of the picture on the cover. It covers all the SSH suite and is called SSH: The Secure Shell (O’Reilly), ISBN: 0-596-00011-1.

PART IV Ubuntu as a Server IN THIS PART CHAPTER 16

File and Print

CHAPTER 17


CHAPTER 18


CHAPTER 19


CHAPTER 20


CHAPTER 21


CHAPTER 22

LDAP


CHAPTER

16

File and Print

IN THIS CHAPTER . Using the Network File System . Putting Samba to Work . Network and Remote Printing with Ubuntu . Creating Network Printers

In the early days of computing, file and printer sharing was pretty much impossible because of the lack of good networking standards and interoperability. If you wanted to use a printer connected to another computer, you had to save the file to a floppy disk and walk over. Nowadays, both file and printer sharing have become second nature in a world where it is not unusual for someone to own more than one computer. Whether it be for sharing photographs among various computers or having a central repository available for collaboration, file sharing is an important part of our information age. Alongside this is the need to be able to share printers; after all, no one wants to have to plug and unplug a computer to a printer just so he can print out a quick letter. Whatever your reasons for needing to share files and printers across a network, you find out how to do both in this chapter. We look at how you can share files using the popular UNIX NFS protocol and the more Windowsfriendly Samba system. You also find out how to configure network-attached printers with interfaces such as JetDirect. We look at both graphical and command-line tools, so you should find something to suit the way you work.

. Using the Common UNIX Printing System GUI . Avoiding Printer Support Problems . Reference

382

CHAPTER 16

File and Print

CAUTION By default, Ubuntu ships with all its network ports blocked. That is, it does not listen to any requests on any ports when it is first installed. To configure the firewall, you must retrieve and install Firestarter using either synaptic or apt-get. After you have installed this, you can use it to configure the firewall to open specific ports relating to the topics covered in this chapter. You can find detailed documentation about Firestarter at http://www.fs-security.com/ docs/.

Using the Network File System Network File System (NFS) is the protocol developed by Sun Microsystems that allows computers to use a remote file system as if it were a real part of the local machine. A common use of NFS is to allow users home directories to appear on every local machine they use, thus eliminating the need to have physical home directories. This opens up hot desking and other flexible working arrangements, especially because no matter where the user is, his home directory follows him around. Another popular use for NFS is to share binary files between similar computers. If you have a new version of a package that you want all machines to have, you have to the upgrade only on the NFS server, and all hosts running the same version of Ubuntu will have the same upgraded package.

Installing and Starting or Stopping NFS NFS is not installed by default on Ubuntu, so you need to install the nfs-common, nfskernel-server, and portmap packages. NFS itself consists of several programs that work together to provide the NFS server service. One is rpc.portmapper, which maps NFS requests to the correct daemon. Two others are rpc.nfsd, which is the NFS daemon, and rpc.mountd, which controls the mounting and unmounting of file systems. Ubuntu automatically adds NFS to the system startup scripts, so it will always be available after you have configured it. To check this, use the command sudo /etc/init.d/nfskernel-server status and it will show you that the service is running. If you need to manually start the NFS server, use the following command: $ sudo /etc/init.d/nfs-kernel-server start Starting NFS services: [ OK ] Starting NFS quotas: [ OK ] Starting NFS daemon: Starting NFS mountd:

[ OK ] [ OK ]

In this example, NFS has been started. Use the stop keyword instead to stop the service, or restart to restart the server. This approach to controlling NFS proves handy, especially after configuration changes have been made. See the next section on how to configure NFS support on your Ubuntu system.

Using the Network File System

383

NFS Server Configuration You can configure the NFS server by editing the /etc/exports file. This file is similar to the /etc/fstab file in that it is used to set the permissions for the file systems being exported. The entries look like this: /file/system yourhost(options) *.yourdomain.com(options) 192.168.0.0/24(options)

This shows three common clients to which to share /file/system. The first, yourhost, shares /file/system to just one host. The second, .yourdomain.com, uses the asterisk (*) as a wildcard to enable all hosts in yourdomain.com to access /file/system. The third share enables all hosts of the Class C network, 192.168.0.0, to access /file/share. For security, it is best not to use shares like the last two across the Internet because all data will be readable by any network the data passes by. Table 16.1 shows some common options.

TABLE 16.1 /etc/fstab Options Purpose

rw

Gives read and write access

ro

Gives read-only access

async

Writes data when the server, not the client, feels the need

sync

Writes data as it is received

The following is an example of an /etc/exports file: # /etc/exports: the access control list for filesystems which may be exported # to NFS clients. See exports(5). /home/andrew 192.168.0.0/24(rw,no_root_squash)

This file exports (makes available) /home/ahudson to any host in 192.168.0.* and allows users to read from and write to /home/andrew. After you have finished with the /etc/exports file, the following command $ sudo exportfs –a

exports all the file systems in the /etc/exports file to a list named xtab under the /var/lib/nfs directory, which is used as a guide for mounting when a remote computer asks for a directory to be exported. The -r option to the command reads the entire /etc/exports file and mounts all the entries. You can also use the exportfs command to export specific files temporarily. Here’s an example using exportfs to export a file system: /usr/sbin/exportfs -o async yourhost:/usr/tmp

This command exports /usr/tmp to yourhost with the async option.

16

Option

384

CHAPTER 16

File and Print

Be sure to restart the NFS server after making any changes to /etc/exports. If you prefer, you can use Ubuntu’s shares-admin graphical client to set up NFS while using the X Window System. Start the client by clicking the System menu and then selecting the Shared Folders menu item from the Administration menu. After you press Enter, you are prompted for your password. Type in the password and click OK; the main window will then display. Click the Add button to open the Add Share dialog box, as shown in Figure 16.1.

FIGURE 16.1 You can use Ubuntu’s share-admin client to quickly set up local directories for export using NFS.

In the Path drop-down box, choose the directory that you want to share; in the Share drop-down box, choose NFS. Click the Add Host button that appears to specify which hosts, IP addresses, or networks to be allowed access to the directory. By default, a directory is exported as read/write, but you can choose read-only by ticking the Read Only option. When finished, click the OK button, click the Apply button, and then use the File menu to quit.

NFS Client Configuration To configure your host as an NFS client (to acquire remote files or directories), you need to ensure that you have the nfs-common package installed, in order to be able to access NFS shares. Once you’ve installed this using either synaptic or apt-get, edit the /etc/fstab file as you would to mount any local file system. However, instead of using a device name to be mounted (such as /dev/sda1), enter the remote hostname and the desired file system to be imported. For example, one entry might look like this: # Device

Mount Point

Type

Options

Freq Pass

yourhost:/usr/local

/usr/local

nfs

nfsvers=3,ro

0

0

Putting Samba to Work

385

NOTE If you use autofs on your system, you need to use proper autofs entries for your remote NFS mounts. See the section 5 man page for autofs.

The Options column uses the same options as standard fstab file entries with some additional entries, such as nfsvers=3, which specifies the third version of NFS. You can also use the mount command, as root, to quickly attach a remote directory to a local file system by using a remote host’s name and exported directory. For example: $ sudo mount -t nfs 192.168.2.67:/music /music

After you press Enter, the entire remote directory appears on your file system. You can verify the imported file system using the df command, as follows: $ df Filesystem 1k-blocks Used Available Use% Mounted on /dev/hda2 18714368 9642600 8121124 55% / /dev/hda1 46636 13247 30981 30% /boot none 120016 0 120016 0% /dev/shm 192.168.2.67:/music 36875376 20895920 14106280 60% /music

Putting Samba to Work Samba uses the Session Message Block (SMB) protocol to enable the Windows operating system (or any operating system) to access Linux files. Using Samba, you can make your Ubuntu machine look just like a Windows computer to other Windows computers on your network. You do not need to install Windows on your PC. Samba is a complex program—the Samba man page (when converted to text) for just the configuration file is 330KB and 7,226 lines long. Although Samba is complex, setting it up and using it does not have to be difficult. There are many options, which accounts for some of Samba’s complexity. Depending on what you want, Samba’s use can be as easy or as difficult as you would like it to be. Fortunately, Ubuntu includes the Samba Web Administration Tool (SWAT), which you can use to configure Samba by using the Mozilla web browser. SWAT provides an easy way to

16

Make sure that the desired mount point exists before using the mount command. When finished using the directory (perhaps for copying backups), you can use the umount command to remove the remote file system. Note that if you specify the root directory (/) as a mount point, you cannot unmount the NFS directory until you reboot (because Linux complains that the file system is in use).

386

CHAPTER 16

File and Print

start and stop the Samba server; set up printing services; define remote access permissions; and create Samba usernames, passwords, and shared directories. This section delves into the basics of configuring Samba, and you should first read how to manually configure Samba to get an understanding of how the software works. At the end of this section, you will see how to enable, start, and use SWAT to set up simple file sharing. Like most of the software that comes with Ubuntu, Samba is licensed under the GPL and is free. Installation is straightforward and the software can be installed using either synaptic or apt-get. Regardless of which route you take, you should snag the samba and swat packages. Installing from source code can be more time-consuming. If you do not want to install using Ubuntu’s default locations, however, installing from the source code is a more configurable method. Just download the source from http://www.samba.org/ and unpack the files. Change into the source directory and, as root, run the command ./configure along with any changes from the defaults. Then run make, make test (if you want), followed by make install to install Samba in the specified locations.

NOTE If you haven’t done so, you might need to install a meta-package (a single package that provides several related packages) called build-essential. This package automatically installs all the make tools, plus other development utilities that you will need to compile software from source code.

When you install Samba, it is a good idea to also install the samba-doc and samba-doc-pdf packages because they contain extensive documentation in text, PDF, and HTML format. After you install it, you can find this documentation in /usr/share/doc/samba*/doc. If you install Samba using your Ubuntu disc, you can find a large amount of documentation in the directory tree starting at /usr/share/doc/samba-doc or /usr/share/doc/samba-docpdf in several formats, including PDF, HTML, and text, among others. Altogether, almost 3MB of documentation is included with the source code. After installing Samba, you can either create the file /etc/samba/smb.conf or use the smb.conf file supplied with Samba, which is located by default under the /etc/samba

directory with Ubuntu. You can find nearly a dozen sample configuration files under the /usr/share/doc/samba*/examples directory.

NOTE Depending on your needs, smb.conf can be a simple file of fewer than 20 lines or a huge file spanning many pages of text. If your needs are complex, I suggest you browse through The Official Samba Howto and Reference Guide, or TOSHARG. This helpful guide can be found at http://samba.org/samba/docs/man/Samba3-HOWTO/.


387

Manually Configuring Samba with /etc/samba/smb.conf The /etc/samba/smb.conf file is broken into sections. Each section is a description of the resource shared (share) and should be titled appropriately. The three special sections are as follows: . [global]—Establishes the global configuration settings (defined in detail in the smb.conf man page and Samba documentation, found under the /usr/share/doc/samba/docs directory) . [homes]—Shares users’ home directories and specifies directory paths and permissions . [printers]—Handles printing by defining shared printers and printer access Each section in your /etc/samba/smb.conf configuration file should be named for the resource being shared. For example, if the resource /usr/local/programs is being shared, you could call the section [programs]. When Windows sees the share, it is called by whatever you name the section (programs in this example). The easiest and fastest way to set up this share is with the following example from smb.conf:

This bit shares the /usr/local/programs directory with any valid user who asks for it and makes that directory writable. It is the most basic share because it sets no limits on the directory. Here are some parameters you can set in the sections: . Requiring a user to enter a password before accessing a shared directory . Limiting the hosts allowed to access the shared directory . Altering permissions users are allowed to have on the directory . Limiting the time of day during which the directory is accessible The possibilities are almost endless. Any parameters set in the individual sections override the parameters set in the [global] section. The following section adds a few restrictions to the [programs] section: [programs] path = /usr/local/programs writeable = true valid users = ahudson browseable = yes

16

[programs] path = /usr/local/programs writeable = true

388

CHAPTER 16

File and Print

create mode = 0700

The valid users entry limits userid to just ahudson. All other users can browse the directory because of the browseable = yes entry, but only ahudson can write to the directory. Any files created by ahudson in the directory give ahudson full permissions, but no one else will have access to the file. This is exactly the same as setting permissions with the chmod command. Again, there are numerous options, so you can be as creative as you want to when developing sections. Setting Global Samba Behavior with the [global] Section The [global] section set parameters establishes configuration settings for all of Samba. If a given parameter is not specifically set in another section, Samba uses the default setting in the [global] section. The [global] section also sets the general security configuration for Samba. The [global] section is the only section that does not require the name in brackets. Samba assumes that anything before the first bracketed section not labeled [global] is part of the global configuration. (Using bracketed headings in /etc/samba/smb.conf makes your configuration file more readable.) The following sections discuss common Samba settings to share directories and printers. You will then see how to test your Samba configuration. Sharing Home Directories Using the [homes] Section The [homes] section shares out Ubuntu home directories for the users. The home directory is shared automatically when a user’s Windows computer connects to the Linux server holding the home directory. The one problem with using the default configuration is that the user sees all the configuration files (such as .profile and others with a leading period in the filename) that he normally wouldn’t see when logging on through Linux. One quick way to avoid this is to include a path option in the [homes] section. To use this solution, each user who requires a Samba share of his home directory needs a separate “home directory” to act as his Windows home directory. For example, this pseudo home directory could be a directory named share in each user’s home directory on your Ubuntu system. You can specify the path option when using SWAT by using the %u option when specifying a path for the default homes shares (see the section “Configuring Samba Using SWAT” later in this chapter). The complete path setting would be this: /home/%u/share

This setting specifies that the directory named share under each user’s directory is the shared Samba directory. The corresponding manual smb.conf setting to provide a separate “home directory” looks like this: [homes] comment = Home Directories path = /home/%u/share valid users = %S


389

read only = No create mask = 0664 directory mask = 0775 browseable = No

If you have a default [homes] section, the share shows up in the user’s Network Neighborhood as the user’s name. When the user connects, Samba scans the existing sections in smb.conf for a specific instance of the user’s home directory. If there is not one, Samba looks up the username in /etc/passwd. If the correct username and password have been given, the home directory listed in /etc/passwd is shared out at the user’s home directory. Typically, the [homes] section looks like this (the browseable = no entry prevents other users from being able to browse your home directory and is a good security practice): [homes] browseable = no writable = yes

This example shares out the home directory and makes it writable to the user. Here’s how you specify a separate Windows home directory for each user:

Sharing Printers by Editing the [printers] Section The [printers] section works much like the [homes] section but defines shared printers for use on your network. If the section exists, users have access to any printer listed in your Ubuntu /etc/printcap file. Like the [homes] section, when a print request is received, all the sections are scanned for the printer. If no share is found (with careful naming, there should not be unless you create a section for a specific printer), the /etc/printcap file is scanned for the printer name that is then used to send the print request. For printing to work properly, you must correctly set up printing services on your Ubuntu computer. A typical [printers] section looks like the following: [printers] comment = Ubuntu Printers browseable = no printable = yes path = /var/spool/samba

The /var/spool/samba is a spool path set just for Samba printing.

16

[homes] browseable = no writable = yes path = /path/to/windows/directories

390

CHAPTER 16

File and Print

Testing Samba with the testparm Command After you have created your /etc/smb.conf file, you can check it for correctness by using the testparm command. This command parses through your /etc/smb.conf file and checks for any syntax errors. If none are found, your configuration file will probably work correctly. It does not, however, guarantee that the services specified in the file will work. It is merely making sure that the file is correctly written. As with all configuration files, if you are modifying an existing, working file, it is always prudent to copy the working file to a different location and modify that file. Then, you can check the file with the testparm utility. The command syntax is as follows: $ sudo testparm /path/to/smb.conf.back-up Load smb config files from smb.conf.back-up Processing section “[homes]” Processing section “[printers]” Loaded services file OK.

This output shows that the Samba configuration file is correct, and, as long as all the services are running correctly on your Ubuntu machine, Samba should be working correctly. Now copy your old smb.conf file to a new location, put the new one in its place, and restart Samba with the command /etc/init.d/smb restart. Your new or modified Samba configuration should now be in place.

Starting the smbd Daemon Now that your smb.conf file is correctly configured, you can start your Samba server daemon. This can be done with the /usr/sbin/smbd command, which (with no options) starts the Samba server with all the defaults. The most common option you will change in this command is the location of the smb.conf file; you change this option if you don’t want to use the default location /etc/smb/smb.conf. The -s option allows you to change the smb.conf file Samba uses; this option is also useful for testing whether a new smb.conf file actually works. Another useful option is the -l option, which specifies the log file Samba uses to store information. To start, stop, or restart Samba from the command line, use the /etc/init.d/samba script with a proper keyword, such as start, like so: $ sudo /etc/init.d/samba start

Using the smbstatus Command The smbstatus command reports on the current status of your Samba connections. The syntax is as follows: /usr/bin/smbstatus [options]


391

Table 16.2 shows some of the available options.

TABLE 16.2 mbstatus Options Option

Result

-b

Brief output

-d

Verbose output

-s /path/to/config

Used if the configuration file used at startup is not the standard one

-u username

Shows the status of a specific user’s connection

-p

Lists current smb processes, which can prove useful in scripts

Connecting with the smbclient Command The smbclient command allows users on other Linux hosts to access your smb shares. You cannot mount the share on your host, but you can use it in a way that is similar to an FTP client. Several options can be used with the smbclient command. The most frequently used is -I followed by the IP address of the computer to which you are connecting. The smbclient command does not require root access to run: smbclient -I 10.10.10.20 -Uusername%password

smb: <current directory on share>

From here, the commands are almost identical to the standard UNIX/Linux FTP commands. Note that you can omit a password on the smbclient command line. You are then prompted to enter the Samba share password.

Mounting Samba Shares There are two ways to mount Samba shares to your Linux host. Mounting a share is the same as mounting an available media partition or remote NFS directory except that the Samba share is accessed using SMB. The first method uses the standard Linux mount command: $ sudo mount -t smbfs //10.10.10.20/homes /mount/point -o username=ahudson,dmask=777,\ fmask=777

NOTE You can substitute the IP address for hostname if your name service is running or the host is in your /etc/hosts file.

16

This gives you the following prompt:

392

CHAPTER 16

File and Print

This command mounts ahudson’s home directory on your host and gives all users full permissions to the mount. The permissions are equal to the permissions on the chmod command. The second method produces the same results using the smbmount command, as follows: $ sudo smbmount //10.10.10.20/homes /mount/point -o username=ahudson,dmask-777,\ fmask=777

To unmount the share, use the following standard command: $ sudo umount /mount/point

You can also use these mount commands to mount true Windows client shares to your Ubuntu host. Using Samba, you can configure your server to provide any service Windows can serve, and no one but you will ever know.

Configuring Samba Using SWAT The Samba team of developers has made administering Samba much easier with the Samba Web Administration Tool (SWAT). SWAT is a web-based configuration and maintenance interface that gets as close to a point-and-click Samba environment as possible. This section provides a simple example of how to use SWAT to set up SMB access to a user’s home directory and how to share a directory.

NOTE Using SWAT requires you to install the openbsd_inetd and swat packages, so make sure you have these before proceeding. Also you need to enable the root account by giving it a password by using the command sudo passwd root. Not enabling the root account prevents you from using SWAT effectively.

You need to perform a few steps before you can start using SWAT. First, make sure you have the Samba and the swat packages installed. You then enable SWAT access to your system by editing the /etc/inetd.conf file by changing the following lines to remove the ## comments if present: ## swat

stream

/usr/sbin/tcpd

tcp

nowait.400

root\

/isr/sbin/swat

Save the file, and then restart the openbsd_inetd daemon using the following command: $ sudo /etc/init.d/openbsd-inetd restart


393

Next, start an X session, launch Firefox, and browse to the http://localhost:901 uniform resource locator (URL). You are presented a login prompt. Enter the root username and password, and then click the OK button. The screen clears, and you see the main SWAT page, as shown in Figure 16.2.

16 FIGURE 16.2 You can use SWAT to easily configure and administer Samba on your system.

TIP You can also configure Samba using Ubuntu’s shares-admin client. Launch the client from the command line of an X terminal window or select the System, Administration, Shared Folders menu item (as shown later in Figure 16.9).

First, click the Globals icon in SWAT’s main page. You see a page similar to the one shown in Figure 16.3. Many options are in the window, but you can quickly set up access for hosts from your LAN by simply entering one or more IP addresses or a subnet address (such as 192.168.0.—note the trailing period, which allows access for all hosts; in this example, on the 192.168.0 subnet) in the Hosts Allow field under the Security Options section. If you need help on how to format the entry, click the Help link to the left of the field. A new web page appears with the pertinent information.

394

CHAPTER 16

File and Print

FIGURE 16.3 Configure Samba to allow access from specific hosts or subnets on your LAN.

When finished, click the Commit Changes button to save the global access settings. The next step is to create a Samba user and set the user’s password. Click the Password icon on the main SWAT page (refer to Figure 16.2). The Server Password Management page opens, as shown in Figure 16.4. Type a new username in the User Name field; then type a password in the New Password and Re-type New Password fields.

NOTE You must supply a username of an existing system user, but the password used for Samba access does not have to match the existing user’s password.

When finished, click the Add New User button. SWAT then creates the username and password and displays Added user username (where username is the name you entered). The new Samba user should now be able to gain access to the home directory from any allowed host if the Samba (smb) server is running. For example, if you have set up Samba on a host named mini that has a user named andrew, the user can access the home directory on mini from any remote host (if allowed by the Globals settings), perhaps by using the smbclient command like so: $ smbclient //mini/andrew -U andrew


395

added interface ip=192.168.0.68 bcast=192.168.0.255 nmask=255.255.255.0 Password: Domain=[MYGROUP] OS=[Unix] Server=[Samba 3.0.28] smb: \> pwd Current directory is \\mini\andrew\ smb: \> quit

16

FIGURE 16.4 Enter a Samba username and password in the SWAT Password page. Click the Status icon (as shown in Figure 16.2 or 16.4) to view Samba’s status or to start, stop, or restart the server. You can use various buttons on the resulting web page to control the server and view periodic or continuous status updates. You can also use SWAT to share a Linux directory. First, click the Shares icon in the toolbar at the top of the main Samba page (refer to Figure 16.2). Then, type a share name in the Create Shares field, and then click the Create Shares button. The SWAT Shares page displays the detailed configuration information in a dialog box, as shown in Figure 16.5, providing access to detailed configuration for the new Samba share. Type the directory name (such as /music) you want to share in the Path field under the Base options. Select No or Yes in the Read Only field under Security options to allow or deny read and write access. Select Yes in the Guest OK option to allow access from other users and specify a hostname, IP address, or subnet in the Hosts Allow field to allow access. Click the Commit Changes button when finished. Remote users can then access the shared volume. This is how a Linux server running Samba can easily mimic shared volumes in a mixed computing environment!

396

CHAPTER 16

File and Print

FIGURE 16.5 Use the SWAT Shares page to set up sharing of a portion of your Linux file system. Alternatively, use the shares-admin client (from the command line or the Server Settings Samba Server menu item on the System Settings menu). Figure 16.6 shows the properties of a shared directory named /home/andrew/music. Unlock the tool by clicking the Unlock button, use the Add button to create new shares, and use the Properties button to edit the share’s access options.

FIGURE 16.6 Configure a Samba share by editing the share defaults.

Creating Network Printers

397

Network and Remote Printing with Ubuntu Chapter 8, “Printing with Ubuntu,” discussed how to set up and configure local printers and the associated print services. This section covers configuring printers for sharing and access across a network. Offices all over the world benefit from using print servers and shared printers. In my office, I have two printers connected to the network via a Mac mini with Ubuntu PPC so that my wife can print from downstairs using a wireless link, and I can print from my three computers in my office. It is a simple thing to do and can bring real productivity benefits, even in small settings.

Creating Network Printers Setting up remote printing service involves configuring a print server and then creating a remote printer entry on one or more computers on your network. This section introduces a quick method of enabling printing from one Linux workstation to another Linux computer on a LAN. You also learn about SMB printing using Samba and its utilities. Finally, this section discusses how to configure network-attached printers and use them to print single or multiple documents.

16

Enabling Network Printing on a LAN If the computer with an attached printer is using Ubuntu and you want to set up the system for print serving, again use the system-config-printer client to create a new printer. To enable sharing, you must follow a few steps, because by default CUPS is not set up to share printers across a network. First, edit your /etc/cups/cupsd.conf file using the following command: $ sudo gedit /etc/cups/cupsd.conf

In this example I have used gedit, but feel free to substitute in your favorite text editor. Then, look for the section that begins with and modify it so that it reads as follows: Order Deny,Allow Deny From All Allow From 127.0.0.1 Allow From 192.168.0.*

398

CHAPTER 16

File and Print

This tells CUPS to share your printers across the network 192.168.0.*, for example. Make sure and change this to match your own network settings. Next you need to look in the same file for the section that starts Listen localhost:631

and modify it to show this: Listen 631

This tells CUPS to listen on port 631 for any printer requests.

Session Message Block Printing Printing to an SMB printer requires Samba, along with its utilities such as the smbclient and associated smbprint printing filter. You can use the Samba software included with Ubuntu to print to a shared printer on a Windows network or set up a printer attached to your system as an SMB printer. This section describes how to create a local printer entry to print to a remote shared printer using SMB. Setting up an SMB or shared printer is usually accomplished under Windows operating systems through configuration settings using the Control Panel’s Network device. After enabling print sharing, reboot the computer. In the My Computer, Printers folder, rightclick the name or icon of the printer you want to share and select Sharing from the popup menu. Set the Shared As item, and then enter a descriptive shared name, such as HP2100, and a password. You must enter a shared name and password to configure the printer when running Linux. You also need to know the printer’s workgroup name, IP address, and printer name and have the username and password on hand. To find this information, select Start, Settings, Printers; then right-click the shared printer’s listing in the Printers window and select Properties from the pop-up window. You can use CUPS to configure Samba to use your printers by editing the smb.conf file. In the global section enter the following lines, if they are not already there: ... load printers = yes printing = cups printcap name = cups

This tells Samba to use CUPS to provide printing services. Next you need to create a new section in the smb.conf file at the end of the file, as follows: [printers] comment = Use this for All Printers path = /var/spool/samba

Using the Common UNIX Printing System GUI

399

browseable = no public = yes guest ok = yes writable = no printable = yes printer admin = root, andrew

This publishes your printers to the network and allows others to connect to them via Windows clients. Make sure you restart the Samba service using the command shown earlier to make Samba pick up the changes to the configuration file.

Using the Common UNIX Printing System GUI You can use CUPS to create printer queues, get print server information, and manage queues by launching a browser (such as Firefox) and browsing to http://localhost:631. CUPS provides a web-based administration interface, as shown in Figure 16.7.

16

FIGURE 16.7 Use the web-based CUPS administrative interface to configure and manage printing.

400

CHAPTER 16

File and Print

If you click the Administration tab in the browser page, you can start configuring your printers, as shown in Figure 16.8.

FIGURE 16.8 Enter the root password to perform printer administration with CUPS.

Creating a CUPS Printer Entry This section provides a short example of creating a Linux printer entry using CUPS’s webbased interface. Use the CUPS interface to create a printer and device queue type (such as local, remote, serial port, or Internet); then you enter a device uniform resource identifier (URI), such as lpd://192.168.2.35/lp, which represents the IP address of a remote UNIX print server, and the name of the remote print queue on the server. You also need to specify the model or make of printer and its driver. A Printers page link allows you to print a test page, stop the printing service, manage the local print queue, modify the printer entry, or add another printer.

Using the Common UNIX Printing System GUI

401

In the Admin page, click the Add Printer button and then enter a printer name in the Name field (such as lp), a physical location of the printer in the Location field, and a short note about the printer (such as its type) in the Description field. Figure 16.9 shows a sample entry for an HP 2100 LaserJet. Click the Continue button. You can then select the type of printer access (local, remote, serial port, or Internet) in the Device page, as shown in Figure 16.10. For example, to configure printing to a local printer, select LPT1 or, for a remote printer, select the LPD/LPR Host or Printer entry.

16

FIGURE 16.9 Use CUPS to create a new printer queue.

402

CHAPTER 16

File and Print

Again click Continue and select a printer make as requested in the dialog box shown in Figure 16.10.

FIGURE 16.10 Select a printer make when creating a new queue. After you click Continue, you then select the driver by choosing the exact model of your printer from the list provided. Finish by clicking the Add Printer button, and you will be prompted for your user name and password (make sure you have admin rights linked to your account) before the printer is actually added to the system. After creating the printer, you can then use the Printer page, as shown in Figure 16.11, to print a test page, stop printing service, manage the local print queue, modify the printer entry, or add another printer. CUPS offers many additional features and after it is installed, configured, and running, provides transparent traditional UNIX printing support for Ubuntu.

NOTE To learn more about CUPS and to get a basic overview of the system, browse to http:/ /www.cups.org/.

Avoiding Printer Support Problems

403

FIGURE 16.11 Manage printers easily using the CUPS Printer page.

Avoiding Printer Support Problems

All-in-One (Print/Fax/Scan) Devices Problematic printers, or printing devices that might or might not work with Ubuntu, include multifunction (or all-in-one) printers that combine scanning, faxing, and printing services. You should research any planned purchase and avoid any vendor unwilling to support Linux with drivers or development information. One shining star in the field of Linux support for multifunction printers is the HP support of the HP OfficeJet Linux driver project at http://hpoj.sourceforge.net/. Printing and scanning are supported on many models, with fax support in development.

Using USB and Legacy Printers Other problems can arise because of a lack of a printer’s USB vendor and device ID information—a problem shared by some USB scanners under Linux. For information regarding USB printer support, check with the Linux printing folks (at the URL in the start of this section) or with the Linux USB project at http://www.linux-usb.org/.

16

Troubleshooting printer problems can prove frustrating, especially if you find that your new printer is not working properly with Linux. Keep in mind, however, that nearly all printers on the market today work with Linux. That said, some vendors have higher batting averages in the game of supporting Linux. If you care to see a scorecard, browse to http://www.linuxprinting.org/vendors.html.

404

CHAPTER 16

File and Print

Although many newer printers require a universal serial bus (USB) port, excellent support still exists for legacy parallel-port (IEEE-1284) printers with Linux, enabling sites to continue to use older hardware. You can take advantage of Linux workarounds to set up printing even if the host computer does not have a traditional parallel printer port or if you want to use a newer USB printer on an older computer. For example, to host a parallel-port-based printer on a USB-only computer, attach the printer to the computer using an inexpensive USB-to-parallel converter. USB-to-parallel converters typically provide a Centronics connector; one end of that connector is plugged in to the older printer, and the other end is plugged in to a USB connector. The USB connector is then plugged in to your hub, desktop, or notebook USB port. On the other hand, you can use an add-on PCI card to add USB support for printing (and other devices) if the legacy computer does not have a built-in USB port. Most PCI USB interface cards add at least two ports, and you can chain devices via a hub.

Related Ubuntu and Linux Commands The following commands help you manage printing services: . accept—Controls print job access to the CUPS server via the command line . cancel—Cancels a print job from the command line . disable—Control printing from the command line . enable—Controls CUPS printers . lp—Sends a specified file to the printer and allows control of the prince service . lpc—Displays the status of printers and print service at the console . lpq—Views print queues (pending print jobs) at the console . lprm—Removes print jobs from the print queue via the command line . lpstat—Displays printer and server status

Reference

405

Reference . http://www.linuxprinting.org/—Browse here for specific drivers and information about USB and other types of printers. . http://www.hp.com/wwsolutions/linux/products/printing_imaging/index.html—Short but definitive information from HP regarding printing product support under Linux. . http://www.linuxdoc.org/HOWTO/Printing-HOWTO/—Grant Taylor’s Printing HOWTO, with information on using various print services under Linux. . http://www.cups.org/—A comprehensive repository of CUPS software, including versions for Red Hat Linux. . http://www.pwg.org/ipp/—Home page for the Internet Printing Protocol standards. . http://www.linuxprinting.org/cups-doc.html—Information about CUPS. . http://www.cs.wisc.edu/~ghost/—Home page for the Ghostscript interpreter. . http://www.samba.org/—Base entry point for getting more information about Samba and using the SMB protocol with Linux, UNIX, Mac OS, and other operating systems. . In addition, an excellent book on Samba to help you learn more is Samba Unleashed (Sams Publishing, 2000, ISBN: 0-672-31862-8).

16

. If you are after more recent coverage of Samba, we would also recommend Using Samba, 3rd Edition (O’Reilly & Associates, 2007, ISBN: 0-596-00769-8).


CHAPTER

17

Apache Web Server Management This chapter covers the configuration and management of the Apache web server. The chapter includes an overview of some of the major components of the server and discussions of text-based and graphical server configuration. You will see how to start, stop, and restart Apache using the command line. The chapter begins with some introductory information about this popular server and then shows you how to install, configure, and start using Apache.

About the Apache Web Server Apache is the most widely used web server on the Internet today, according to a Netcraft survey of active websites in June 2007, which is shown in Table 17.1. Note that these statistics do not reflect Apache’s use on internal networks, known as intranets. The name Apache appeared during the early development of the software because it was “a patchy” server, made up of patches for the freely available source code of the NCSA HTTPd web server. For a while after the NCSA HTTPd project was discontinued, a number of people wrote a variety of patches for the code, to either fix bugs or add features they wanted. A lot of this code was floating around and people were freely sharing it, but it was completely unmanaged. After a while, Brian Behlendorf and Cliff Skolnick set up a centralized repository of these patches, and the Apache project was born. The project is still composed of a small

IN THIS CHAPTER . About the Apache Web Server . Installing the Apache Server . Starting and Stopping Apache . Runtime Server Configuration Settings . File System Authentication and Access Control . Apache Modules . Virtual Hosting . Logging . Other Web Servers for Use with Ubuntu . Reference

408

CHAPTER 17


core group of programmers, but anyone is welcome to submit patches to the group for possible inclusion in the code.

TABLE 17.1 Netcraft Survey Results (June 2007) Web Server Apache

Number

Percentage

65,588,298

53.76%

38,836,030

31.83%

Google

4,872,765

3.99%

SunONE

2,273,173

1.86%

lighttpd

1,470,930

1.21%

Microsoft

*

*

All web server products

There has been a surge of interest in the Apache project over the past several years, partially buoyed by a new interest in open source on the part of enterprise-level information services. It’s also due in part to crippling security flaws found in Microsoft’s Internet Information Services (IIS); the existence of malicious web task exploits; and operating system and networking vulnerabilities to the now-infamous Code Red, Blaster, and Nimda worms. IBM made an early commitment to support and use Apache as the basis for its web offerings and has dedicated substantial resources to the project because it makes more sense to use an established, proven web server. In mid-1999, The Apache Software Foundation was incorporated as a nonprofit company. A board of directors, who are elected on an annual basis by the ASF members, oversees the company. This company provides a foundation for several open-source software development projects, including the Apache Web Server project. The best places to find out about Apache are the Apache Group’s website, http://www. apache.org/, and the Apache Week website, http://www.apacheweek.com/, where you can subscribe to receive Apache Week by email to keep up on the latest developments in the project, keep abreast of security advisories, and research bug fixes.

TIP You’ll find an overview of Apache in its frequently asked questions (FAQs) at http:/ /httpd.apache.org/docs-2.0/faq/. In addition to extensive online documentation, you’ll also find the complete documentation for Apache in the HTML directory of your Apache server. You can access this documentation by looking at http://localhost/manual/index.html on your new Ubuntu system with one of the web browsers included on your system. You’ll need to have Apache running on your system!

Ubuntu ships with Apache 2, and the server (named apache2) is included on this book’s DVD. You can obtain the latest version of Apache as a package file from an Ubuntu FTP

Installing the Apache Server

409

server, through Synaptic, or by getting the source code from the Apache website and, in true Linux tradition, build it for yourself. To determine the version of Apache included with your system, use the web server’s -V command-line option like this: $ /usr/sbin/apache2 -V Server version: Apache/2.0.50 Server built: Jun 29 2004 11:11:55 Server’s Module Magic Number: 20020903:8 Architecture: 32-bit Server compiled with....

The output displays the version number, build date and time, platform, and various options used during the build. You can use the -v option to see terser version information.

Installing the Apache Server You can install Apache through APT or build it yourself from source code. The Apache source builds on just about any UNIX-like operating system and on Win32. If you are about to install a new version of Apache, you should shut down the old server. Even if it’s unlikely that the old server will interfere with the installation procedure, shutting it down ensures that there will be no problems. If you do not know how to stop Apache, see the “Starting and Stopping Apache” section later in this chapter.

You can find the Apache package in the default Ubuntu software repository, on the Ubuntu FTP server, or at one of its many mirror sites. Updated packages usually contain important bug and security fixes. When an updated version is released, install it as quickly as possible to keep your system secure.

NOTE Check the Apache site for security reports. Browse to http://httpd.apache.org/security_report.html for links to security vulnerabilities for Apache 1.3, 2.0, and 2.2. Subscribe to a support list or browse through up-to-date archives of all Apache mailing lists at http://httpd.apache.org/mail/ (for various articles) or http://httpd.apache.org/ lists.html (for comprehensive and organized •archives).

CAUTION You should be wary of installing experimental packages, and never install them on production servers (that is, servers used in “real life”). Very carefully test the packages beforehand on a host that is not connected to a network!

17

Installing with APT

410

CHAPTER 17


The easiest way to use APT is through Synaptic, which is under the System > Administration menu. Search for apache2 and select it, and Synaptic will add the required dependencies. The Apache package installs files in the following directories: . /etc/apache2—This directory contains the Apache configuration file, apache2.conf. . /etc/init.d/—The tree under this directory contains the system startup scripts. The Apache package installs a startup script named apache2 for the web server under the /etc/init.d directory. This script, which you can use to start and stop the server from the command line, also automatically starts and stops the server when the computer is halted, started, or rebooted. . /var/www—The package installs the default server icons, Common Gateway Interface (CGI) programs, and HTML files in this location. If you want to keep web content elsewhere, you can do so by making the appropriate changes in the server configuration files. . /var/www/manual/—If you’ve installed the apache-manual package, you’ll find a copy of the Apache documentation in HTML format here. You can access it with a web browser by going to http://localhost/manual/. . /usr/share/man—Ubuntu’s Apache package also contains manual pages, which are placed underneath this directory. For example, the apache2 man page is in section 8 of the man directory. . /usr/sbin—The executable programs are placed in this directory. This includes the server executable itself, as well as various utilities. . /usr/bin—Some of the utilities from the Apache package are placed here—for example, the htpasswd program, which is used for generating authentication password files. . /var/log/apache2—The server log files are placed in this directory. By default, there are two important log files (among several others): access_log and error_log. However, you can define any number of custom logs containing a variety of information. See the section “Logging,” later in this chapter, for more detail. When Apache is being run, it also creates the file apache2.pid, containing the process ID of Apache’s parent process in the /var/run/ directory.

NOTE If you are upgrading to a newer version of Apache, APT does not write over your current configuration files.

Building the Source Yourself You can download the source directly from http://www.apache.org/. The latest version at the time of this writing (2.2.8) is a 6MB compressed tape archive, and the latest pre-2.0 version of Apache is 1.3.34. Although many sites continue to use the older version (for

Installing the Apache Server

411

script and other compatibility reasons), many new sites are migrating to or starting out using the latest stable version. After you have the tar file, you must unroll it in a temporary directory, such as /tmp. Unrolling this tar file creates a directory called apache_version_number, where version_number is the version you have downloaded (for example, apache_1.3.34). There are two ways to compile the source—the old, familiar way (at least, to those of us who have been using Apache for many years) by editing Makefile templates, and the new, easy way using a configure script. You will first see how to build Apache from source the easy way. The configure script offers a way to have the source software automatically configured according to your system. However, manually editing the configuration files before building and installing Apache provides more control over where the software is installed and which capabilities or features are built in to Apache.

TIP As with many software packages distributed in source code form for Linux and other UNIX-like operating systems, extracting the source code results in a directory that contains a README and an INSTALL file. Be sure to peruse the INSTALL file before attempting to build and install the software.

Using ./configure to Build Apache To build Apache the easy way, run the ./configure script in the directory just created. You can provide it with a --prefix argument to install it in a directory other than the default, which is /usr/local/apache/. Use this command:

This generates the Makefile that is used to compile the server code. Next, type make to compile the server code. After the compilation is complete, type make install as root to install the server. You can now configure the server via the configuration files. See the “Runtime Server Configuration Settings” section for more information.

TIP A safer way to install a new version of Apache from source is to use the ln command to create symbolic links of the existing file locations (listed in the “Installing with APT” section earlier in this chapter) to the new locations of the files. This method is safer because the default install locations are different from those used when the package installs the files. Failure to use this installation method could result in your web server process not being started automatically at system startup. Another safe way to install a new version of Apache is to first back up any important configuration directories and files (such as /etc/apache2) and then use the apt-get command to remove the server. You can then install and test your new version and, if needed, easily restore your original server and settings.

17

# ./configure --prefix=/preferred/directory/

412

CHAPTER 17


It is strongly recommended that you use Ubuntu’s version of Apache until you really know what happens at system startup. No “uninstall” option is available when installing Apache from source!

Apache File Locations After a Build and Install Files are placed in various subdirectories of /usr/local/apache (or whatever directory you specified with the --prefix parameter) if you build the server from source. The following is a list of the directories used by Apache, as well as brief comments on their usage: . /usr/local/apache/conf—This contains several subdirectories and the Apache configuration file, httpd.conf. Debian-based systems such as Ubuntu often rename this to apache2.conf, so your mileage may vary. See the section “Editing apache2.conf” later in this chapter to learn more about configuration files. . /usr/local/apache—The cgi-bin, icons, and htdocs subdirectories contain the CGI programs, standard icons, and default HTML documents, respectively. . /usr/local/apache/bin—The executable programs are placed in this directory. . /usr/local/apache/logs—The server log files are placed in this directory. By default, there are two log files—access_log and error_log—but you can define any number of custom logs containing a variety of information (see the “Logging” section later in this chapter). The default location for Apache’s logs as installed by Ubuntu is /var/log/apache2.

A Quick Guide to Getting Started with Apache Setting up, testing a web page, and starting Apache using Ubuntu can be accomplished in just a few steps. First, make sure that Apache is installed on your system. Either select it during installation or install the server and related package files (refer to Chapter 31 if you need to install the server software) . Next, set up a home page for your system by editing (as root) the file named index.html under the /var/ www directory on your system. Make a backup copy of the original page or www directory before you begin so you can restore your web server to its default state if necessary. Start Apache through the Services window (under System, Administration from the menu bar), making sure to enable “Web Server”.

You can also use the apache2 script under the /etc/init.d/ directory, like this: sudo /etc/init.d/apache2 start

You can then check your home page by running a favorite browser and using localhost, your system’s hostname, or its Internet Protocol (IP) address in the URL. For example, with the links text browser, use a command line like this: # links http://localhost/

Starting and Stopping Apache

413

For security reasons, you should not start and run Apache as root if your host is connected to the Internet or a company intranet. Fortunately, Apache is set to run as the user and group www-data no matter how it is started (by the User and Group settings in /etc/apache2/apache2.conf). Despite this safe default, Apache should be started and managed by the user named apache, defined in /etc/passwd as www-data:x:33:33:www-data:/var/www:/sbin/nologin

After you are satisfied with your website, use the Services configuration dialog to ensure that Apache is started.

Starting and Stopping Apache At this point, you have installed your Apache server with its default configuration. Ubuntu provides a default home page named index.html as a test under the /var/www/ directory. The proper way to run Apache is to set system initialization to have the server run after booting, network configuration, and any firewall configuration. See Chapter 11, “Automating Tasks,” for more information about how Ubuntu boots. It is time to start it up for the first time. The following sections show how to either start and stop Apache or configure Ubuntu to start or not start Apache when booting.

Starting the Apache Server Manually

The -h option prints the following usage information for the server (assuming that you are running the command through sudo): sudo apache2 -h Usage: apache2 [-D name] [-d directory] [-f file] [-C “directive”] [-c “directive”] [-k start|restart|graceful|stop] [-v] [-V] [-h] [-l] [-L] [-t] Options: -D name

: define a name for use in directives

17

You can start Apache from the command line of a text-based console or X terminal window, and you must have root permission to do so. The server daemon, apache2, recognizes several command-line options you can use to set some defaults, such as specifying where apache2 reads its configuration directives. The Apache apache2 executable also understands other options that enable you to selectively use parts of its configuration file, specify a different location of the actual server and supporting files, use a different configuration file (perhaps for testing), and save startup errors to a specific log. The -v option causes Apache to print its development version and quit. The -V option shows all the settings that were in effect when the server was compiled.

414

CHAPTER 17


-d directory -f file

: specify an alternate initial ServerRoot : specify an alternate ServerConfigFile

-C “directive” -c “directive”

: process directive before reading config files : process directive after reading config files

-e level -E file -v -V -h -l -L -t -D DUMP_VHOSTS -t :

: show startup errors of level (see LogLevel) : log startup errors to file : show version number : show compile settings : list available command line options (this page) : list compiled in modules : list available configuration directives : show parsed settings (currently only vhost settings) run syntax check for config files

Other options include listing Apache’s static modules, or special, built-in independent parts of the server, along with options that can be used with the modules. These options are called configuration directives and are commands that control how a static module works. Note that Apache also includes nearly 50 dynamic modules, or software portions of the server that can be optionally loaded and used while the server is running. The -t option is used to check your configuration files. It’s a good idea to run this check before restarting your server, especially if you’ve made changes to your configuration files. Such tests are important because a configuration file error can result in your server shutting down when you try to restart it.

NOTE When you build and install Apache from source, start the server manually from the command line through sudo (such as when testing). You do this for two reasons: .The standalone server uses the default HTTP port (port 80), and only the superuser can bind to Internet ports that are lower than 1024. .Only processes owned by root can change their UID and GID as specified by Apache’s User and Group directives. If you start the server under another UID, it runs with the permissions of the user starting the process. Note that although some of the following examples show how to start the server through sudo, you should do so only for testing after building and installing Apache.

Using /etc/init.d/apache2 Ubuntu uses the scripts in the /etc/init.d directory to control the startup and shutdown of various services, including the Apache web server. The main script installed for the Apache web server is /etc/init.d/apache2, although the actual work is done by the apache2ctl shell script included with Apache.

Starting and Stopping Apache

415

NOTE /etc/init.d/apache2 is a shell script and is not the same as the Apache server locat-

ed in /usr/sbin. That is, /usr/sbin/apache2 is the program executable file (the server); /etc/init.d/apache2 is a shell script that uses another shell script, apache2ctl, to control the server. See Chapter 11 for a description of some service scripts under /etc/init.d and how the scripts are used to manage services such as apache2.

You can use the /etc/init.d/apache2 script and the following options to control the web server: . start—The system uses this option to start the web server during bootup. You, through sudo, can also use this script to start the server. . stop—The system uses this option to stop the server gracefully. You should use this script, rather than the kill command, to stop the server. . reload—You can use this option to send the HUP signal to the apache2 server to have it reread the configuration files after modification. . restart—This option is a convenient way to stop and then immediately start the web server. If the apache2 server isn’t running, it is started. . condrestart—The same as the restart parameter, except that it restarts the apache2 server only if it is actually running.

For example, to check on the status of your server, use the command sudo /etc/init.d/apache2 status

This prints the following for me: apache2 (pid 15997 1791 1790 1789 1788 1787 1786 1785 1784 1781) is running...

This indicates that the web server is running; in fact, 10 instances of the server are currently running in this configuration. In addition to the previous options, the apache2 script also offers these features: . help—Prints a list of valid options to the apache2 script (which are passed onto the server as if called from the command line). . configtest—A simple test of the server’s configuration, which reports Status OK if the setup is correct. You can also use apache2’s -t option to perform the same test, like this: audo apache2 -t

17

. status—This option indicates whether the server is running; if it is, it provides the various PIDs for each instance of the server.

416

CHAPTER 17


. fullstatus—Displays a verbose status report. . graceful—The same as the restart parameter, except that the configtest option is used first and open connections are not aborted.

TIP Use the reload option if you are making many changes to the various server configuration files. This saves time when you are stopping and starting the server by having the system simply reread the configuration files.

Runtime Server Configuration Settings At this point, the Apache server will run, but perhaps you want to change a behavior, such as the default location of your website’s files. This section talks about the basics of configuring the server to work the way you want it to work. Runtime configurations are stored in just one file—apache2.conf, which is found under the /etc/apache2 directory. This configuration file can be used to control the default behavior of Apache, such as the web server’s base configuration directory (/etc/apache2), the name of the server’s process identification (PID) file (/var/run/apache2.pid), or its response timeout (300 seconds). Apache reads the data from the configuration file when started (or restarted). You can also cause Apache to reload configuration information with the command /etc/init.d/apache2 reload, which is necessary after making changes to its configuration file. (You learned how to accomplish this in the earlier section, “Starting and Stopping Apache.”)

Runtime Configuration Directives You perform runtime configuration of your server with configuration directives, which are commands that set options for the apache2 daemon. The directives are used to tell the server about various options you want to enable, such as the location of files important to the server configuration and operation. Apache supports nearly 300 configuration directives using the following syntax: directive option option...

Each directive is specified on a single line. See the following sections for some sample directives and how to use them. Some directives only set a value such as a filename, whereas others enable you to specify various options. Some special directives, called sections, look like HTML tags. Section directives are surrounded by angle brackets, such as . Sections usually enclose a group of directives that apply only to the directory specified in the section: directive option option directive option option

Runtime Server Configuration Settings

417

All sections are closed with a matching section tag that looks like this: . Note that section tags, like any other directives, are specified one per line.

TIP After installing and starting Apache, you’ll find an index of directives at http://localhost/manual/mod/directives.html.

Editing apache2.conf Most of the default settings in the config file are okay to keep, particularly if you’ve installed the server in a default location and aren’t doing anything unusual on your server. In general, if you do not understand what a particular directive is for, you should leave it set to the default value. The following sections describe some of the configuration file settings you might want to change concerning operation of your server. ServerRoot The ServerRoot directive sets the absolute path to your server directory. This directive tells the server where to find all the resources and configuration files. Many of these resources are specified in the configuration files relative to the ServerRoot directory. Your ServerRoot directive should be set to /etc/apache2 if you installed the Ubuntu package or /usr/local/apache (or whatever directory you chose when you compiled Apache) if you installed from the source.

User and Group The User and Group directives should be set to the UID and group ID (GID) the server will use to process requests. In Ubuntu, set these configurations to a user with few or no privileges. In this case, they’re set to user apache and group apache—a user defined specifically to run Apache. If you want to use a different UID or GID, be aware that the server will run with the permissions of the user and group set here. That means in the event of a security breach, whether on the server or (more likely) in your own CGI programs, those programs will run with the assigned UID. If the server runs as root or some other privileged user, someone can exploit the security holes and do nasty things to your site. Always think in terms of the

17

Listen The Listen directive indicates on which port you want your server to run. By default, this is set to 80, which is the standard HTTP port number. You might want to run your server on another port—for example, when running a test server that you don’t want people to find by accident. Do not confuse this with real security! See the “File System Authentication and Access Control” section for more information about how to secure parts of your web server.

418

CHAPTER 17


specified user running a command such as rm -rf / because that would wipe all files from your system. That should convince you that leaving apache as a user with no privileges is probably a good thing. Instead of specifying the User and Group directives using names, you can specify them using the UID and GID numbers. If you use numbers, be sure that the numbers you specify correspond to the user and group you want and that they’re preceded by the pound (#) symbol. Here’s how these directives look if specified by name: User apache Group apache

Here’s the same specification by UID and GID: User #48 Group #48

TIP If you find a user on your system (other than root) with a UID and GID of 0, your system has been compromised by a malicious user.

ServerAdmin The ServerAdmin directive should be set to the address of the webmaster managing the server. This address should be a valid email address or alias, such as [email protected], because this address is returned to a visitor when a problem occurs on the server. ServerName The ServerName directive sets the hostname the server will return. Set it to a fully qualified domain name (FQDN). For example, set it to www.your.domain rather than simply www. This is particularly important if this machine will be accessible from the Internet rather than just on your local network. You don’t need to set this unless you want a name other than the machine’s canonical name returned. If this value isn’t set, the server will figure out the name by itself and set it to its canonical name. However, you might want the server to return a friendlier address, such as www.your.domain. Whatever you do, ServerName should be a real domain name service (DNS) name for your network. If you’re administering your own DNS, remember to add an alias for your host. If someone else manages the DNS for you, ask that person to set this name for you. DocumentRoot Set this directive to the absolute path of your document tree, which is the top directory from which Apache will serve files. By default, it’s set to /var/www/. If you built the


419

source code yourself, DocumentRoot is set to /usr/local/apache/htdocs (if you did not choose another directory when you compiled Apache). UserDir The UserDir directive disables or enables and defines the directory (relative to a local user’s home directory) where that user can put public HTML documents. It is relative because each user has her own HTML directory. This setting is disabled by default but can be enabled to store user web content under any directory. The default setting for this directive, if enabled, is public_html. Each user can create a directory called public_html under her home directory, and HTML documents placed in that directory are available as http://servername/~username, where username is the username of the particular user. DirectoryIndex The DirectoryIndex directive indicates which file should be served as the index for a directory, such as which file should be served if the URL http://servername/_SomeDirectory/ is requested. It is often useful to put a list of files here so that if index.html (the default value) isn’t found, another file can be served instead. The most useful application of this is to have a CGI program run as the default action in a directory. If you have users who make their web pages on Windows, you might want to add index.htm as well. In that case, the directive would look like DirectoryIndex index.html index.cgi index.htm.

Apache Multiprocessing Modules

Apache can use only one MPM at any time. These modules are different from the base set included with Apache (see the “Apache Modules” section later in this chapter) but are used to implement settings, limits, or other server actions. Each module in turn supports numerous additional settings, called directives, which further refine server operation. The internal MPM modules relevant for Linux include . mpm_common—A set of 20 directives common to all MPM modules . prefork—A nonthreaded, preforking web server that works similar to earlier (1.3) versions of Apache . worker—Provides a hybrid multiprocess multithreaded server MPM enables Apache to be used on equipment with fewer resources yet still handle massive numbers of hits and provide stable service. The worker module provides directives to control how many simultaneous connections your server can handle.

17

Apache version 2.0 and greater now uses a new internal architecture supporting multiprocessing modules (MPMs). These modules are used by the server for a variety of tasks, such as network and process management, and are compiled into Apache. MPMs enable Apache to work much better on a wider variety of computer platforms, and they can help improve server stability, compatibility, and scalability.

420

CHAPTER 17


NOTE Other MPMs are available for Apache related to other platforms, such as mpm_netware for NetWare hosts and mpm_winnt for NT platforms. An MPM named perchild, which provides user ID assignment to selected daemon processes, is under development. For more information, browse to the Apache Software Foundation’s home page at http:/ /www.apache.org.

Using .htaccess Configuration Files Apache also supports special configuration files, known as .htaccess files. Almost any directive that appears in apache2.conf can appear in a .htaccess file. This file, specified in the AccessFileName directive in apache2.conf sets configurations on a per-directory (usually in a user directory) basis. As the system administrator, you can specify both the name of this file and which of the server configurations can be overridden by the contents of this file. This is especially useful for sites in which there are multiple content providers and you want to control what these people can do with their space. To limit which server configurations the .htaccess files can override, use the AllowOverride directive. AllowOverride can be set globally or per directory. For example, in your apache2.conf file, you could use the following: # Each directory to which Apache has access can be configured with respect # to which services and features are allowed and/or disabled in that # directory (and its subdirectories). # # First, we configure the “default” to be a very restrictive set of # permissions. # Options FollowSymLinks AllowOverride None

Options Directives To configure which configuration options are available to Apache by default, you must use the Options directive. Options can be None; All; or any combination of Indexes, Includes, FollowSymLinks, ExecCGI, and MultiViews. MultiViews isn’t included in All and must be specified explicitly. These options are explained in Table 17.2.

TABLE 17.2 Switches Used by the Options Directive Switch

Description

None

None of the available options are enabled for this directory.

All

All the available options, except for MultiViews, are enabled for this directory.


421

TABLE 17.2 Switches Used by the Options Directive Switch

Description

Indexes

In the absence of an index.html file or another DirectoryIndex file, a listing of the files in the directory is generated as an HTML page for display to the user.

Includes

Server-side includes (SSIs) are permitted in this directory. This can also be written as IncludesNoExec if you want to allow includes but don’t want to allow the exec option in them. For security reasons, this is usually a good idea in directories over which you don’t have complete control, such as UserDir directories.

FollowSymLinks

Allows access to directories that are symbolically linked to a document directory. You should never set this globally for the whole server and only rarely for individual directories. This option is a potential security risk because it allows web users to escape from the document directory and could potentially allow them access to portions of your file system where you really don’t want people poking around.

ExecCGI

CGI programs are permitted in this directory, even if it is not a directory defined in the ScriptAlias directive.

MultiViews

This is part of the mod_negotiation module. When a client requests a document that can’t be found, the server tries to figure out which document best suits the client’s requirements. See http://localhost/manuals/mod/_mod_negotiation.html for your local copy of the Apache documentation.

17

NOTE These directives also affect all subdirectories of the specified directory. AllowOverrides Directives The AllowOverrides directives specify which configuration options .htaccess files can override. You can set this directive individually for each directory. For example, you can have different standards about what can be overridden in the main document root and in UserDir directories. This capability is particularly useful for user directories, where the user does not have access to the main server configuration files. AllowOverrides can be set to All or any combination of Options, FileInfo, AuthConfig, and Limit. These options are explained in Table 17.3.

TABLE 17.3 Switches Used by the AllowOverrides Directive Switch

Description

Options

The .htaccess file can add options not listed in the Options directive for this directory.

422

CHAPTER 17


FileInfo

The .htaccess file can include directives for modifying document type information.

AuthConfig

The .htaccess file might contain authorization directives.

Limit

The .htaccess file might contain allow, deny, and order directives.

File System Authentication and Access Control You’re likely to include material on your website that isn’t supposed to be available to the public. You must be able to lock out this material from public access and provide designated users with the means to unlock the material. Apache provides two methods for accomplishing this type of access: authentication and authorization. You can use different criteria to control access to sections of your website, including checking the client’s IP address or hostname, or requiring a username and password. This section briefly covers some of these methods.

CAUTION Allowing individual users to put web content on your server poses several important security risks. If you’re operating a web server on the Internet rather than on a private network, you should read the WWW Security FAQ at http://www.w3.org/Security/Faq/ www-security-faq.html.

Restricting Access with allow and deny One of the simplest ways to limit access to website material is to restrict access to a specific group of users, based on IP addresses or hostnames. Apache uses the allow and deny directives to accomplish this. Both directives take an address expression as a parameter. The following list provides the possible values and use of the address expression: . all can be used to affect all hosts. . A hostname or domain name, which can either be a partially or a fully qualified domain name; for example, test.gnulix.org or gnulix.org. . An IP address, which can be either full or partial; for example, 212.85.67 or 212.85.67.66. . A network/netmask pair, such as 212.85.67.0/255.255.255.0. . A network address specified in classless inter-domain routing (CIDR) format; for example, 212.85.67.0/24. This is the CIDR notation for the same network and netmask that were used in the previous example. If you have the choice, it is preferable to base your access control on IP addresses rather than hostnames. Doing so results in faster performance because no name lookup is necessary—the IP address of the client is included with each request.

File System Authentication and Access Control

423

You also can use allow and deny to provide or deny access to website material based on the presence or absence of a specific environment variable. For example, the following statement denies access to a request with a context that contains an environment variable named NOACCESS: deny from env=NOACCESS

The default behavior of Apache is to apply all the deny directives first and then check the allow directives. If you want to change this order, you can use the order statement. Apache might interpret this statement in three different ways: . Order deny,allow—The deny directives are evaluated before the allow directives. If a host is not specifically denied access, it is allowed to access the resource. This is the default ordering if nothing else is specified. . Order allow,deny—All allow directives are evaluated before deny directives. If a host is not specifically allowed access, it is denied access to the resource. . Order mutual-failure—Only hosts that are specified in an allow directive and at the same time do not appear in a deny directive are allowed access. If a host does not appear in either directive, it is not granted access. Consider this example. Suppose you want to allow only persons from within your own domain to access the server-status resource on your web. If your domain were named gnulix.org, you could add these lines to your configuration file:

Authentication Authentication is the process of ensuring that visitors really are who they claim to be. You can configure Apache to allow access to specific areas of web content only to clients who can authenticate their identity. There are several methods of authentication in Apache; Basic Authentication is the most common (and the method discussed in this chapter). Under Basic Authentication, Apache requires a user to supply a username and a password to access the protected resources. Apache then verifies that the user is allowed to access the resource in question. If the username is acceptable, Apache verifies the password. If the password also checks out, the user is authorized and Apache serves the request. HTTP is a stateless protocol; each request sent to the server and each response is handled individually, and not in an intelligent fashion. Therefore, the authentication information must be included with each request. That means each request to a password-protected area is larger and therefore somewhat slower. To avoid unnecessary system use and delays, protect only those areas of your website that absolutely need protection.

17

SetHandler server-status Order deny,allow Deny from all Allow from gnulix.org

CHAPTER 17

424


To use Basic Authentication, you need a file that lists which users are allowed to access the resources. This file is composed of a plain text list containing name and password pairs. It looks very much like the /etc/passwd user file of your Linux system.

CAUTION Do not use /etc/passwd as a user list for authentication. When you’re using Basic Authentication, passwords and usernames are sent as base64-encoded text from the client to the server—which is just as readable as plain text. The username and password are included in each request that is sent to the server. So, anyone who might be snooping on Net traffic would be able to get this information!

To create a user file for Apache, use the htpasswd command. This is included with the Apache package. If you installed using the packages, it is in /usr/bin. Running htpasswd without any options produces the following output: Usage: htpasswd [-cmdps] passwordfile username htpasswd -b[cmdps] passwordfile username password

-c -n -m -d -p -s -b

htpasswd -n[mdps] username htpasswd -nb[mdps] username password Create a new file. Don’t update file; display results on stdout. Force MD5 encryption of the password. Force CRYPT encryption of the password (default). Do not encrypt the password (plaintext). Force SHA encryption of the password. Use the password from the command line rather than prompting for it.

-D Delete the specified user. On Windows, TPF and NetWare systems the ‘-m’ flag is used by default. On all other systems, the ‘-p’ flag will probably not work.

As you can see, it isn’t a very difficult command to use. For example, to create a new user file named gnulixusers with a user named wsb, you need to do something like this: sudo htpasswd -c gnulixusers wsb

You would then be prompted for a password for the user. To add more users, you would repeat the same procedure, only omitting the -c flag. You can also create user group files. The format of these files is similar to that of /etc/groups. On each line, enter the group name, followed by a colon, and then list all users, with each user separated by spaces. For example, an entry in a user group file might look like this: gnulixusers: wsb pgj jp ajje nadia rkr hak

File System Authentication and Access Control

425

Now that you know how to create a user file, it’s time to look at how Apache might use this to protect web resources. To point Apache to the user file, use the AuthUserFile directive. AuthUserFile takes the file path to the user file as its parameter. If the file path is not absolute—that is, beginning with a /—it is assumed that the path is relative to the ServerRoot. Using the AuthGroupFile directive, you can specify a group file in the same manner. Next, use the AuthType directive to set the type of authentication to be used for this resource. Here, the type is set to Basic. Now you need to decide to which realm the resource will belong. Realms are used to group different resources that will share the same users for authorization. A realm can consist of just about any string. The realm is shown in the Authentication dialog box on the user’s web browser. Therefore, you should set the realm string to something informative. The realm is defined with the AuthName directive. Finally, state which type of user is authorized to use the resource. You do this with the require directive. The three ways to use this directive are as follows: . If you specify valid-user as an option, any user in the user file is allowed to access the resource (that is, provided she also enters the correct password). . You can specify a list of users who are allowed access with the users option. . You can specify a list of groups with the group option. Entries in the group list, as well as the user list, are separated by a space.

SetHandler server-status AuthType Basic AuthName “Server status” AuthUserFile “gnulixusers” Require valid-user

Final Words on Access Control If you have host-based as well as user-based access protection on a resource, the default behavior of Apache is to require the requester to satisfy both controls. But assume that you want to mix host-based and user-based protection and allow access to a resource if either method succeeds. You can do so using the satisfy directive. You can set the satisfy directive to All (this is the default) or Any. When set to All, all access control methods must be satisfied before the resource is served. If satisfy is set to Any, the resource is served if any access condition is met.

17

Returning to the server-status example you saw earlier, instead of letting users access the server-status resource based on hostname, you can require the users to be authenticated to access the resource. You can do so with the following entry in the configuration file:

426

CHAPTER 17


Here’s another access control example, again using the previous server-status example. This time, you combine access methods so all users from the Gnulix domain are allowed access and those from outside the domain must identify themselves before gaining access. You can do so with the following: SetHandler server-status Order deny,allow Deny from all Allow from gnulix.org AuthType Basic AuthName “Server status” AuthUserFile “gnulixusers” Require valid-user Satisfy Any

There are more ways to protect material on your web server, but the methods discussed here should get you started and will probably be more than adequate for most circumstances. Look to Apache’s online documentation for more examples of how to secure areas of your site.

Apache Modules The Apache core does relatively little; Apache gains its functionality from modules. Each module solves a well-defined problem by adding necessary features. By adding or removing modules to supply the functionality you want Apache to have, you can tailor Apache server to suit your exact needs. Nearly 50 core modules are included with the basic Apache server. Many more are available from other developers. The Apache Module Registry is a repository for add-on modules for Apache, and it can be found at http://modules.apache.org/. The modules are stored in the /usr/lib/apache2/modules directory (your list might look different): mod_access.so

mod_cern_meta.so

mod_log_config.so

mod_setenvif.so

mod_actions.so mod_alias.so mod_asis.so

mod_cgi.so mod_dav_fs.so mod_dav.so

mod_mime_magic.so mod_mime.so mod_negotiation.so

mod_speling.so mod_ssl.so mod_status.so

mod_auth_anon.so mod_auth_dbm.so

mod_dir.so mod_env.so

mod_perl.so mod_proxy_connect.so

mod_suexec.so mod_unique_id.so

mod_auth_digest.so mod_auth_mysql.so mod_auth_pgsql.so

mod_expires.so mod_headers.so mod_imap.so

mod_proxy_ftp.so mod_proxy_http.so mod_proxy.so

mod_userdir.so mod_usertrack.so mod_vhost_alias.so

Apache Modules

mod_auth.so mod_info.so

mod_include.so mod_rewrite.so

mod_python.so

427

mod_autoindex.so

Each module adds new directives that can be used in your configuration files. As you might guess, there are far too many extra commands, switches, and options to describe them all in this chapter. The following sections briefly describe a subset of those modules available with Ubuntu’s Apache installation.

mod_access mod_access controls access to areas on your web server based on IP addresses, hostnames, or environment variables. For example, you might want to allow anyone from within your own domain to access certain areas of your web. Refer to the “File System Authentication and Access Control” section for more information.

mod_alias mod_alias manipulates the URLs of incoming HTTP requests, such as redirecting a client request to another URL. It also can map a part of the file system into your web hierarchy. For example, Alias /images/ /home/wsb/graphics/

mod_asis mod_asis is used to specify, in fine detail, all the information to be included in a response.

This completely bypasses any headers Apache might have otherwise added to the response. All files with an .asis extension are sent straight to the client without any changes. As a short example of the use of mod_asis, assume you’ve moved content from one location to another on your site. Now you must inform people who try to access this resource that it has moved, as well as automatically redirect them to the new location. To provide this information and redirection, you can add the following code to a file with a .asis extension: Status: 301 No more old stuff! Location: http://gnulix.org/newstuff/

17

fetches contents from the /home/wsb/graphics directory for any URL that starts with /images/. This is done without the client knowing anything about it. If you use a redirection, the client is instructed to go to another URL to find the requested content. More advanced URL manipulation can be accomplished with mod_rewrite.

428

CHAPTER 17


Content-type: text/html <TITLE>We’ve moved...
We’ve moved the old stuff and now you’ll find it at:
New stuff!.

mod_auth mod_auth uses a simple user authentication scheme, referred to as Basic Authentication,

which is based on storing usernames and encrypted passwords in a text file. This file looks very much like UNIX’s /etc/passwd file and is created with the htpasswd command. Refer to the “File System Authentication and Access Control” section earlier in this chapter for more information about this subject.

mod_auth_anon The mod_auth_anon module provides anonymous authentication similar to that of anonymous FTP. The module enables you to define user IDs of those who are to be handled as guest users. When such a user tries to log on, he is prompted to enter his email address as his password. You can have Apache check the password to ensure that it’s a (more or less) proper email address. Basically, it ensures that the password contains an @ character and at least one . character.

mod_auth_dbm mod_auth_dbm uses Berkeley DB files instead of text for user authentication files.

mod_auth_digest An extension of the basic mod_auth module, instead of sending the user information in plain text, mod_auth_digestis sent via the MD5 Digest Authentication process. This authentication scheme is defined in RFC 2617. Compared to using Basic Authentication, this is a much more secure way of sending user data over the Internet. Unfortunately, not all web browsers support this authentication scheme. To create password files for use with mod_auth_dbm, you must use the htdigest utility. It has more or less the same functionality as the htpasswd utility. See the man page of htdigest for further information.

Apache Modules

429

mod_autoindex The mod_autoindex module dynamically creates a file list for directory indexing. The list is rendered in a user-friendly manner similar to those lists provided by FTP’s built-in ls command.

mod_cgi mod_cgi allows execution of CGI programs on your server. CGI programs are executable files residing in the /var/www/cgi-bin directory and are used to dynamically generate data (usually HTML) for the remote browser when requested.

mod_dir and mod_env The mod_dir module is used to determine which files are returned automatically when a user tries to access a directory. The default is index.html. If you have users who create web pages on Windows systems, you should also include index.htm, like this: DirectoryIndex index.html index.htm mod_env controls how environment variables are passed to CGI and SSI scripts.

mod_expires mod_expires is used to add an expiration date to content on your site by adding an Expires header to the HTTP response. Web browsers or cache servers won’t cache expired

content.

mod_headers is used to manipulate the HTTP headers of your server’s responses. You can replace, add, merge, or delete headers as you see fit. The module supplies a Header directive for this. Ordering of the Header directive is important. A set followed by an unset for the same HTTP header removes the header altogether. You can place Header directives almost anywhere within your configuration files. These directives are processed in the following order:

1. Core server 2. Virtual host 3. and .htaccess files

mod_include mod_include enables the use of server-side includes on your server, which were quite popular before PHP took over this part of the market.

17

mod_headers

430

CHAPTER 17


mod_info and mod_log_config mod_info provides comprehensive information about your server’s configuration. For

example, it displays all the installed modules, as well as all the directives used in its configuration files. mod_log_config defines how your log files should look. See the “Logging” section for further information about this subject.

mod_mime and mod_mime_magic The mod_mime module tries to determine the MIME type of files from their extensions. The mod_mime_magic module tries to determine the MIME type of files by examining portions of their content.

mod_negotiation Using the mod_negotiation module, you can select one of several document versions that best suits the client’s capabilities. There are several options to select which criteria to use in the negotiation process. You can, for example, choose among different languages, graphics file formats, and compression methods.

mod_proxy mod_proxy implements proxy and caching capabilities for an Apache server. It can proxy and cache FTP, CONNECT, HTTP/0.9, and HTTP/1.0 requests. This isn’t an ideal solution for sites that have a large number of users and therefore have high proxy and cache requirements. However, it’s more than adequate for a small number of users.

mod_rewrite mod_rewrite is the Swiss army knife of URL manipulation. It enables you to perform any imaginable manipulation of URLs using powerful regular expressions. It provides rewrites, redirection, proxying, and so on. There is very little that you can’t accomplish using this module.

TIP See http://localhost/manual/misc/rewriteguide.html for a cookbook that gives you an in-depth explanation of what the mod_rewrite module is capable of.

mod_setenvif mod_setenvif allows manipulation of environment variables. Using small snippets of textmatching code known as regular expressions, you can conditionally change the content of environment variables. The order in which SetEnvIf directives appear in the configuration files is important. Each SetEnvIf directive can reset an earlier SetEnvIf directive

Apache Modules

431

when used on the same environment variable. Be sure to keep that in mind when using the directives from this module.

mod_speling mod_speling is used to enable correction of minor typos in URLs. If no file matches the requested URL, this module builds a list of the files in the requested directory and extracts those files that are the closest matches. It tries to correct only one spelling mistake.

mod_status You can use mod_status to create a web page containing a plethora of information about a running Apache server. The page contains information about the internal status as well as statistics about the running Apache processes. This can be a great aid when you’re trying to configure your server for maximum performance. It’s also a good indicator of when something’s amiss with your Apache server.

mod_ssl mod_ssl provides Secure Sockets Layer (version 2 and 3) and transport layer security

(version 1) support for Apache. At least 30 directives exist that deal with options for encryption and client authorization and that can be used with this module.

mod_unique_id mod_unique_id generates a unique request identifier for every incoming request. This ID is put into the UNIQUE_ID environment variable.

The mod_userdir module enables mapping of a subdirectory in each user’s home directory into your web tree. The module provides several ways to accomplish this.

mod_usertrack mod_usertrack is used to generate a cookie for each user session. This can be used to track the user’s click stream within your web tree. You must enable a custom log that logs this cookie into a log file.

mod_vhost_alias mod_vhost_alias supports dynamically configured mass virtual hosting, which is useful for Internet service providers (ISPs) with many virtual hosts. However, for the average user, Apache’s ordinary virtual hosting support should be more than sufficient.

There are two ways to host virtual hosts on an Apache server. You can have one IP address with multiple CNAMEs, or you can have multiple IP addresses with one name per address. Apache has different sets of directives to handle each of these options. (You learn more about virtual hosting in Apache in the next section of this chapter.)

17

mod_userdir

432

CHAPTER 17


Again, the available options and features for Apache modules are too numerous to describe completely in this chapter. You can find complete information about the Apache modules in the online documentation for the server included with Ubuntu or at the Apache Group’s website.

Virtual Hosting One of the more popular services to provide with a web server is to host a virtual domain. Also known as a virtual host, a virtual domain is a complete website with its own domain name, as if it were a standalone machine, but it’s hosted on the same machine as other websites. Apache implements this capability in a simple way with directives in the apache2.conf configuration file. Apache now can dynamically host virtual servers by using the mod_vhost_alias module you read about in the preceding section of the chapter. The module is primarily intended for ISPs and similar large sites that host a large number of virtual sites. This module is for more advanced users and, as such, it is outside the scope of this introductory chapter. Instead, this section concentrates on the traditional ways of hosting virtual servers.

Address-Based Virtual Hosts After you’ve configured your Linux machine with multiple IP addresses, setting up Apache to serve them as different websites is simple. You need only put a VirtualHost directive in your apache2.conf file for each of the addresses you want to make an independent website: ServerName gnulix.org DocumentRoot /home/virtual/gnulix/public_html TransferLog /home/virtual/gnulix/logs/access_log ErrorLog /home/virtual/gnulix/logs/error_log

Use the IP address, rather than the hostname, in the VirtualHost tag. You can specify any configuration directives within the tags. For example, you might want to set AllowOverrides directives differently for virtual hosts than you do for your main server. Any directives that aren’t specified default to the settings for the main server.

Name-Based Virtual Hosts Name-based virtual hosts enable you to run more than one host on the same IP address. You must add the names to your DNS as CNAMEs of the machine in question. When an HTTP client (web browser) requests a document from your server, it sends with the request a variable indicating the server name from which it’s requesting the document. Based on this variable, the server determines from which of the virtual hosts it should serve content.

Virtual Hosting

433

NOTE Some older browsers are unable to see name-based virtual hosts because this is a feature of HTTP 1.1 and the older browsers are strictly HTTP 1.0–compliant. However, many other older browsers are partially HTTP 1.1–compliant, and this is one of the parts of HTTP 1.1 that most browsers have supported for a while.

Name-based virtual hosts require just one step more than IP address-based virtual hosts. You must first indicate which IP address has the multiple DNS names on it. This is done with the NameVirtualHost directive: NameVirtualHost 212.85.67.67

You must then have a section for each name on that address, setting the configuration for that name. As with IP-based virtual hosts, you need to set only those configurations that must be different for the host. You must set the ServerName directive because it’s the only thing that distinguishes one host from another: ServerName bugserver.gnulix.org ServerAlias bugserver DocumentRoot /home/bugserver/htdocs ScriptAlias /home/bugserver/cgi-bin TransferLog /home/bugserver/logs/access_log

TIP If you are hosting websites on an intranet or internal network, users will likely use the shortened name of the machine rather than the FQDN. For example, users might type http://bugserver/index.html in their browser location field rather than http://bugserver. gnulix.org/index.html. In that case, Apache would not recognize that those two addresses should go to the same virtual host. You could get around this by setting up VirtualHost directives for both bugserver and bugserver.gnulix.org, but the easy way around it is to use the ServerAlias directive, which lists all valid aliases for the machine: ServerAlias bugserver

17

ServerName pts.gnulix.org ServerAlias pts DocumentRoot /home/pts/htdocs ScriptAlias /home/pts/cgi-bin TransferLog /home/pts/logs/access_log ErrorLog /home/pts/logs/error_log

434

CHAPTER 17


For more information about VirtualHost, refer to the help system on http://localhost/_manual.

Logging Apache provides logging for just about any web access information you might be interested in. Logging can help with . System resource management, by tracking usage . Intrusion detection, by documenting bad HTTP requests . Diagnostics, by recording errors in processing requests Two standard log files are generated when you run your Apache server: access_log and error_log. They are found under the /var/log/apache2 directory. (Others include the SSL logs ssl_access_log, ssl_error_log and ssl_request_log.) All logs except for the error_log (by default, this is just the access_log) are generated in a format specified by the CustomLog and LogFormat directives. These directives appear in your apache2.conf file. A new log format can be defined with the LogFormat directive: LogFormat “%h %l %u %t \”%r\” %>s %b” common

The common log format is a good starting place for creating your own custom log formats. Note that most of the available log analysis tools assume you’re using the common log format or the combined log format—both of which are defined in the default configuration files. The following variables are available for LogFormat statements: . %a Remote IP address. . %A Local IP address. . %b Bytes sent, excluding HTTP headers. This is shown in Apache’s Combined Log Format (CLF). For a request without any data content, a - is shown instead of 0. . %B Bytes sent, excluding HTTP headers. . %{VARIABLE}e The contents of the environment variable VARIABLE. . %f The filename of the output log. . %h Remote host. . %H Request protocol. . %{HEADER}i The contents of HEADER; header line(s) in the request sent to the server. . %l Remote log name (from identd, if supplied). . %m Request method. . %{NOTE}n The contents of note NOTE from another module.

Other Web Servers for Use with Ubuntu

435

. %{HEADER}o The contents of HEADER; header line(s) in the reply. . %p The canonical port of the server serving the request. . %P The process ID of the child that serviced the request. . %q The contents of the query string, prepended with a ? character. If there’s no query string, this evaluates to an empty string. . %r The first line of request. . %s Status. For requests that were internally redirected, this is the status of the original request—%>s for the last. . %t The time, in common log time format. . %{format}t The time, in the form given by format, which should be in strftime(3) format. See the section “Basic SSI Directives” later in this chapter for a complete list of available formatting options. . %T The seconds taken to serve the request. . %u Remote user from auth; this might be bogus if the return status (%s) is 401. . %U The URL path requested. . %V The server name according to the UseCanonicalName directive. . %v The canonical ServerName of the server serving the request.

You can then specify the location and format of a log file using the CustomLog directive: CustomLog logs/access_log common

If it is not specified as an absolute path, the location of the log file is assumed to be relative to the ServerRoot.

Other Web Servers for Use with Ubuntu To determine the best web server for your use, consider the needs of the website you manage. Does it need heavy security (for e-commerce), multimedia (music, video, and pictures), or the capability to download files easily? How much are you willing to spend for the software? Do you need software that is easy to maintain and troubleshoot or that includes tech support? The answers to these questions might steer you to something other than Apache. The following sections list some of the more popular alternatives to using Apache as your web server.

17

You can put a conditional in front of each variable to determine whether the variable is displayed. If the variable isn’t displayed, - is displayed instead. These conditionals are in the form of a list of numerical return values. For example, %!401u displays the value of REMOTE_USER unless the return code is 401.

436

CHAPTER 17


Sun ONE Web Server Despite the Netcraft numbers shown previously in Table 17.1, there is evidence that the Sun Java System Web Server (formerly known as the iPlanet Web Server, and subsequently Sun ONE Web Server) might be even more popular than Apache in strictly corporate arenas. The server got its start as the Netscape Enterprise Server—one of the first powerful web servers ever to hit the market. Sun ONE Web Server comes in many flavors, and all of them are big. In addition to the enterprise-level web server that can be run on Ubuntu, the software features application, messaging, calendar, and directory servers—just to name a few. Sun ONE Web Server is great for handling big web needs, and it comes with an appropriately big price tag. It’s definitely not something to run the school website—unless your school happens to be a major state university with several regional campuses. For more information on Sun Java System Web Server, you can visit its website (http://wwws.sun. com/software/products/web_srvr/home_web_srvr.html).

Zope Zope is another open-source web server. Although it is still relatively young and might not have as much flexibility as Apache, it is making strong inroads in the web server market. What makes Zope different from Apache is the fact that it is managed through a completely web-based graphic interface. This has broad appeal for those who are not enthused about a command-line–only interface. Zope is a product of the Zope Corporation (formerly Digital Creations), the same firm that made the Python programming language. And, like all things open source, it is free. Information on Zope can be found at both http://www.zope.com (for the commercial version) and http://www.zope.org (for the open-source version).

Zeus Web Server Ubuntu sites can also use the Zeus Web Server from Zeus Technology. This server offers a scalable SSL implementation, security settings across multiple websites, and an online administration server. The current price is $1,700 for a host platform with up to two CPUs, but load balancing via the Zeus Load Balancer costs $12,000 (at the time of writing) for each pair of load-balancing computers. You can get more information about the Zeus Web Server at http://www.zeus.com/products/zws/.

Reference

437

Related Ubuntu and Linux Commands You will use these commands when managing your Apache web Server in Ubuntu: . apache2ctl—Server control shell script included with Apache . apache2—The Apache web server . konqueror—KDE’s graphical web browser . elinks—A text-based, graphical menu web browser . firefox—The premier open-source web browser

Reference There is a plethora of Apache documentation online. For more information about Apache and the subjects discussed in this chapter, look at some of the following resources: . http://news.netcraft.com/archives/web_server_survey.html—A statistical graph of web server usage by millions of servers. The research points out that Apache is by far the most widely used server for Internet sites. . http://www.apache.org/—Extensive documentation and information about Apache are available at The Apache Project website. . http://www.apacheweek.com/—You can obtain breaking news about Apache and great technical articles at the Apache Week site. . http://apachetoday.com/—Another good Apache site. Original content as well as links to Apache-related stories on other sites can be found at Apache Today’s site.

. http://modules.apache.org/—Available add-on modules for Apache can be found at The Apache Module Registry website. There are several good books about Apache. For example, Apache Server Unleashed (Sams Publishing), ISBN 0-672-31808-3. For more information on Zope, see The Zope Book (New Riders Publishing), ISBN 0-735711372.

17

. http://www.hwg.org/—HTML, CGI, and related subjects are available at The HTML Writers Guild site.


CHAPTER

18


IN THIS CHAPTER . Choosing an FTP Server . Installing FTP Software . The FTP User . inetd Configuration for wu-ftpd . Configuring the Very Secure FTP Server

File Transfer Protocol (FTP) was once considered the

. Configuring the Server

primary method used to transfer files over a network from computer to computer. FTP is still heavily used today, although many graphical FTP clients now supplement the original text-based interface command. As computers have evolved, so has FTP, and Ubuntu includes many ways with which to use a graphical interface to transfer files over FTP.

. Using Commands in the ftpaccess File to Configure wu-ftpd

This chapter contains an overview of the available FTP software included with Ubuntu, along with some details concerning initial setup, configuration, and use of FTPspecific clients. Ubuntu also includes an FTP server software package named vsftpd, the Very Secure FTP Daemon, and a number of associated programs you can use to serve and transfer files with the FTP protocol.

Choosing an FTP Server FTP uses a client/server model. As a client, FTP accesses a server, and as a server, FTP provides access to files or storage. Just about every computer platform available has software written to enable a computer to act as an FTP server, but Ubuntu provides the average user with the capability do this without paying hefty licensing fees and without regard for client usage limitations. There are two types of FTP servers and access: anonymous and standard. A standard FTP server requires an account name and password from anyone trying to access the server. Anonymous servers allow anyone to connect to the server to retrieve files. Anonymous servers provide the most flexibility, but they can also present a security risk. Fortunately, as

. Configuring FTP Server FileConversion Actions . Using the ftphosts to Allow or Deny FTP Server Connection . Using Commands for Server Administration . Reference

440

CHAPTER 18


you will read in this chapter, Ubuntu is set up to use proper file and directory permissions and common-sense default configuration, such as disallowing root to perform an FTP login.

NOTE Many Linux users now use OpenSSH and its suite of clients, such as the sftp command, for a more secure solution when transferring files. The OpenSSH suite provides the sshd daemon and enables encrypted remote logins (see Chapter 15 for more information).

Choosing an Authenticated or Anonymous Server When you are preparing to set up your FTP server, you must first make the decision to install either the authenticated or anonymous service. Authenticated service requires the entry of a valid username and password for access. As previously mentioned, anonymous service allows the use of the username anonymous and an email address as a password for access. Authenticated FTP servers are used to provide some measure of secure data transfer for remote users, but will require maintenance of user accounts as usernames and passwords are used. Anonymous FTP servers are used when user authentication is not needed or necessary, and can be helpful in providing an easily accessible platform for customer support or public distribution of documents, software, or other data. If you use an anonymous FTP server in your home or business Linux system, it is vital that you properly install and configure it to retain a relatively secure environment. Generally, sites that host anonymous FTP servers place them outside the firewall on a dedicated machine. The dedicated machine contains only the FTP server and should not contain data that cannot be restored quickly. This dedicated-machine setup prevents malicious users who compromise the server from obtaining critical or sensitive data. For an additional, but by no means more secure setup, the FTP portion of the file system can be mounted read-only from a separate hard drive partition or volume, or mounted from readonly media, such as CD-ROM, DVD, or other optical storage.

Ubuntu FTP Server Packages The Very Secure vsftpd server, like wu-ftpd (also discussed in this chapter), is licensed under the GNU GPL. The server can be used for personal or business purposes. The wuftpd and vsftpd servers are covered in the remainder of this chapter.

Other FTP Servers One alternative server is NcFTPd, available from http://www.ncftp.com. This server operates independently of inetd (typically used to enable and start the wu-ftp server) and provides its own optimized daemon. Additionally, NcFTPd has the capability to cache directory listings of the FTP server in memory, thereby increasing the speed at which users can obtain a list of available files and directories. Although NcFTPd has many advantages

Installing FTP Software

441

over wu-ftpd, NcFTPd is not GPL-licensed software, and its licensing fees vary according to the maximum number of simultaneous server connections ($199 for 51 or more concurrent users and $129 for up to 50 concurrent users, but free to education institutions with a compliant domain name).

NOTE Do not confuse the ncftp client with ncftpd. The ncftp-3.1 package included with Ubuntu is the client software, a replacement for ftp-0.17, and includes the ncftpget and ncftpput commands for transferring files via the command line or by using a remote file uniform resource locator (URL) address. ncftpd is the FTP server, which can be downloaded from www.ncftpd.com. Another FTP server package for Linux is ProFTPD, licensed under the GNU GPL. This server works well with most Linux distributions and has been used by a number of Linux sites, including ftp.kernel.org and ftp.sourceforge.net. ProFTPD is actively maintained and updated for bug fixes and security enhancements. Its developers recommend that you use the latest release (1.2.10 at the time of this writing) to avoid exposure to exploits and vulnerabilities. Browse to http://www.proftpd.org to download a copy. Yet another FTP server package is Bsdftpd-ssl, which is based on the BSD ftpd (and distributed under the BSD license). Bsdftpd-ssl offers simultaneous standard and secure access using security extensions; secure access requires a special client. For more details, browse to http://bsdftpd-ssl.sc.ru. Finally, another alternative is to use Apache (and the HTTP protocol) for serving files. Using a web server to provide data downloads can reduce the need to monitor and maintain a separate software service (or directories) on your server. This approach to serving files also reduces system resource requirements and gives remote users a bit more flexibility when downloading (such as enabling them to download multiple files at once). See Chapter 17, “Apache Web Server Management,” for more information about using Apache.

As part of the standard installation, the client software for FTP is already installed. You can verify that FTP-related software is installed on your system by using dpkg, grep, and sort commands in this query: $ dpkg --get-selections | grep ftp | sort

The example results might differ, depending on what software packages are installed. In your Ubuntu file system, you will find the /usr/bin/pftp file symbolically linked to /usr/bin/netkit-ftp as well as the vsftpd server under the /usr/sbin directory. Other installed packages include additional text-based and graphical FTP clients. In this chapter we will discuss two seperate FTP server applications, wu-ftpd and vsftpd. It's important to note that both applications cannot be installed at the same time. If vsftpd is not installed, you can install it via the command line by running the following command: sudo apt-get install vsftpd. Alternatively, you can install wu-ftpd by running the following command: sudo apt-get install wu-ftpd.

18

Installing FTP Software

442

CHAPTER 18


NOTE If you host an FTP server connected to the Internet, make it a habit to always check the Ubuntu site for up-to-date system errata and security and bug fixes for your server software.

You can find packages for a wide variety of FTP tools, including wu-ftpd, in Synaptic. Again, just make sure you have the Universe repository enabled.

The FTP User After installing Ubuntu, an FTP user is created. This user is not a normal user per se, but a name for anonymous FTP users. The FTP user entry in /etc/passwd looks like this: ftp:x:14:50:FTP User:/home/ftp:/bin/false

NOTE The FTP user, as discussed here, applies to anonymous FTP configurations and server setup. Also, note that other Linux distributions might use a different default directory, such as /usr/local/ftp, for FTP files and anonymous users.

This entry follows the standard /etc/passwd entry: username, password, User ID, Group ID, comment field, home directory, and shell. To learn more about /etc/password, see the section “The Password File” in Chapter 10, “Managing Users.” Each of the items in this entry is separated by colons. In the preceding example, you can see that the Ubuntu system hosting the server uses shadowed password because an x is present in the traditional password field. The shadow password system is important because it adds an additional level of security to Ubuntu; the shadow password system is normally installed during the Ubuntu installation. The FTP server software uses this user account to assign permissions to users connecting to the server. By using a default shell of /bin/false for anonymous FTP users versus /bin/bash or some other standard, interactive shell, an anonymous FTP user, will be unable to log in as a regular user. /bin/false is not a shell, but a program usually assigned to an account that has been locked. As root inspection of the /etc/shadow file shows (see Listing 18.2), it is not possible to log in to this account, denoted by the * as the password.

LISTING 18.1 Shadow Password File ftp User Entry # cat /etc/shadow

The FTP User

443

bin:*:11899:0:99999:7::: daemon:*:11899:0:99999:7::: adm:*:11899:0:99999:7::: lp:*:11899:0:99999:7::: ... ftp:*:12276:0:99999:7::: ...

The shadow file (only a portion of which is shown in Listing 18.1) contains additional information not found in the standard /etc/passwd file, such as account expiration, password expiration, whether the account is locked, and the encrypted password. The * in the password field indicates that the account is not a standard login account; thus, it does not have a password. Although shadow passwords are in use on the system, passwords are not transmitted in a secure manner when using FTP. Because FTP was written before the necessity of encryption and security, it does not provide the mechanics necessary to send encrypted passwords. Account information is sent in plain text on FTP servers; anyone with enough technical knowledge and a network sniffer can find the password for the account you connect to on the server. Many sites use an anonymous-only FTP server specifically to prevent normal account passwords from being transmitted over the Internet. Figure 18.1 shows a portion of a wireshark capture of an FTP session. The wireshark client is a graphical browser used to display network traffic in real time, and it can be used to watch packet data, such as an FTP login on a LAN.

Quick and Dirty FTP Service

1. Ensure that the FTP server package is installed, networking is enabled, and firewall rules on the server allow FTP access. See Chapter 14, “Networking,” to learn about firewalling. 2. If anonymous access to server files is desired, populate the /home/ftp/pub directory. Do this by mounting or copying your content, such as directories and files, under this directory. 3. Edit and then save the appropriate configuration file (such as /etc.vsftpd.conf for vsftpd) to enable access. 4. If you are using wu-ftpd, you must then restart the server like so: /etc/init.d/wu-ftpd restart. Alternatively, if you are using vsftpd, you must then start or restart the server like so: /etc/init.d/vsftpd restart.

18

Conscientious Linux administrators will take the time to carefully install, set up, and configure a production FTP server before offering public service or opening up for business on the Internet. However, you can set up a server very quickly on a secure LAN by following a few simple steps:

444

CHAPTER 18


FIGURE 18.1 The Wireshark client can filter and sniff FTP sessions to capture usernames and passwords.

Starting the Very Secure FTP Server (vsftpd) Package You can use the shell script named vsftp under the /etc/init.d directory to start, stop, restart, and query the vsftpd server. You must have root permission to use the vsftpd script to control the server, but any user can query the server (to see if it is running and to see its process ID number) using the status keyword, like this: $ /etc/init.d/vsftpd status

Be sure not to run two FTP servers on your system at the same time!

Configuring the Very Secure FTP Server

445

Configuring the Very Secure FTP Server The server offers simplicity, security, and speed. It has been used by a number of sites,

such as ftp.debian.org, ftp.gnu.org, rpmfind.net, and ftp.gimp.org. Note that despite its name, the Very Secure FTP server does not enable use of encrypted usernames or passwords. Its main configuration file is vsftpd.conf, which resides under the /etc directory. The server has a number of features and default policies, but these can be overridden by changing the installed configuration file. By default, anonymous logins are enabled, but users are not allowed to upload files, create new directories, or delete or rename files. The configuration file installed by Ubuntu allows local users (that is, users with a login and shell account) to log in and then access their home directory. This configuration presents potential security risks because usernames and passwords are passed without encryption over a network. The best policy is to deny your users access to the server from their user accounts. The standard vsftpd configuration disables this feature.

Controlling Anonymous Access Toggling anonymous access features for your FTP server is done by editing the vsftpd.conf file and changing related entries to YES or NO in the file. Settings to control how the server works for anonymous logins include: . anonymous_enable—Enabled by default. Use a setting of NO, and then restart the server to turn off anonymous access. . anon_mkdir_write_enable—Allows or disallows creating of new directories. . anon_other_write_enable—Allows or disallows deleting or renaming of files and directories.

18

. anon_upload_enable—Controls whether anonymous users can upload files (also depends on the global write_enable setting). This is a potential security and liability hazard and should rarely be used; if enabled, consistently monitor any designated upload directory.

446

CHAPTER 18


. anon_world_readable_only—Allows only anonymous users to download files with world-readable (444) permission. After making any changes to your server configuration file, make sure to restart the server; this forces vsftpd to reread its settings.

Other vsftpd Server Configuration Files You can edit vsftpd.conf to enable, disable, and configure many features and settings of the vsftpd server, such as user access, filtering of bogus passwords, and access logging. Some features might require the creation and configuration of other files, such as: . /etc/vsftpd.user_list—Used by the userlist_enable and/or the userlist_deny options; the file contains a list of usernames to be denied access to the server. . /etc/vsftpd.chroot_list—Used by the chroot_list_enable and/or chroot_local_user options, this file contains a list of users who are either allowed or denied access to a home directory. An alternate file can be specified by using the chroot_list_file option. . /etc/vsftpd.banned_emails—A list of anonymous password entries used to deny access if the deny_email_enable setting is enabled. An alternative file can be specified by using the banned_email option. . /var/log/vsftpd.log—Data transfer information is captured to this file if logging is enabled using the xferlog_enable setting.

TIP Whenever editing the FTP server files, make a backup file first. Also, it is always a good idea to comment out (using a pound sign at the beginning of a line) what is changed instead of deleting or overwriting entries. Follow these comments with a brief description explaining why the change was made. This leaves a nice audit trail of what was done, by whom, when, and why. If you have any problems with the configuration, these comments and details can help you troubleshoot and return to valid entries if necessary. You can use the dpkg command or other Linux tools (such as mc) to extract a fresh copy of a configuration file from the software’s package archive. Be aware, however, that the extracted version will replace the current version and overwrite your configuration changes. Default vsftpd Behaviors The contents of a file named .message (if it exists in the current directory) are displayed when a user enters the directory. This feature is enabled in the installed configuration file, but disabled by the daemon. FTP users are also not allowed to perform recursive directory listings, which can help reduce bandwidth use. The PASV data connection method is enabled to let external users know the IP address of the FTP server. This is a common problem when using FTP from behind a firewall/gateway using IP masquerading or when incoming data connections are disabled because without

Configuring the Very Secure FTP Server

447

passive mode, the remote server tries to form a connection to your local host and gets blocked. For example, here is a connection to an FTP server (running ProFTPD), an attempt to view a directory listing, and the resulting need to use ftp’s internal passive command: $ ftp ftp.tux.org Connected to gwyn.tux.org. 220 ProFTPD 1.2.5rc1 Server (ProFTPD on ftp.tux.org) [gwyn.tux.org] 500 AUTH not understood. KERBEROS_V4 rejected as an authentication type Name (ftp.tux.org:gbush): gbush 331 Password required for gbush. Password: 230 User gbush logged in. Remote system type is UNIX. Using binary mode to transfer files. ftp> cd public_html 250 CWD command successful. ftp> ls 500 Illegal PORT command. ftp: bind: Address already in use ftp> ftp> pass Passive mode on.

LinuxUnleashed.gif RHU72ed.gif SuSEUnleashed.jpg TYSUSE.gif TZones.gif

NOTE Browse to http://slacksite.com/other/ftp.html for a detailed discussion regarding active and passive FTP modes and the effect of firewall blocking of service ports on FTP server and client connections.

Other default settings are that specific user login controls are not set, but you can configure the controls to deny access to one or more users. The data transfer rate for anonymous client access is unlimited, but you can set a maximum rate (in bytes per second) by using the anon_max_rate setting in vsftpd.conf.

18

ftp> ls 227 Entering Passive Mode (204,86,112,12,187,89). 150 Opening ASCII mode data connection for file list -rw-r—r— 1 gbush gbush 8470 Jan 10 2000 -rw-r—r— 1 gbush gbush 4407 Oct 4 2001 -rw-r—r— 1 gbush gbush 6732 May 18 2000 -rw-r—r— 1 gbush gbush 6175 Jan 10 2000 -rw-r—r— 1 gbush gbush 3135 Jan 10 2000 ...

448

CHAPTER 18


This can be useful for throttling bandwidth use during periods of heavy access. Another default is that remote clients will be logged out after five minutes of idle activity or a stalled data transfer. You can set idle and transfer timeouts (stalled connections) separately. Other settings that might be important for managing your system’s resources (networking bandwidth or memory) when offering FTP access include the following: . dirlist_enable—Toggles directory listings on or off. . dirmessage_enable—Toggles display of a message when the user enters a directory. A related setting is ls_recurse_enable, which can be used to disallow recursive directory listings. . download_enable—Toggles downloading on or off. . max_clients—Sets a limit on the maximum number of connections. . max_per_ip—Sets a limit on the number of connections from the same IP address.

Configuring the wu-ftpd Server Wu-FTP uses a number of configuration files to control how it operates, including the

following: . ftpaccess—Contains the majority of server configuration settings . ftpconversions—Contains definitions of file conversions during transfers . ftphosts—Settings to control user access from specific hosts These files may be created in the /etc/wu-ftpd directory during installation of the wuftpd application. The following sections describe each of these files and how to use the commands they contain to configure the Wu-FTP server so that it is accessible to all incoming requests.

CAUTION When configuring an anonymous FTP server, it is extremely important to ensure that all security precautions are taken to prevent malicious users from gaining privileged-level access to the server. Although this chapter shows you how to configure your FTP server for secure use, all machines connected to the Internet are potential targets for malicious attacks. Vulnerable systems can be a source of potential liability, especially if anyone accesses and uses them to store illegal copies of proprietary software—even temporarily.

Using Commands in the ftpaccess File to Configure wu-ftpd The ftpaccess file contains most of the server configuration details. Each line contains a definition or parameter that is passed to the server to specify how the server is to operate. The directives can be broken down into the following categories, including:

Using Commands in the ftpaccess File to Configure wu-ftpd

449

. Access Control—Settings that determine who can access the FTP server and how it is accessed . Information—Settings that determine what information is provided by the server or displayed to a user . Logging—Settings that determine whether logging is enabled and what information is logged . Permission Control—Settings that control the behavior of users when accessing the server; in other words, what actions users are allowed to perform, such as create a directory, upload a file, delete a file or directory, and so on

TIP Many more options can be specified for the wu-ftpd FTP server in its ftpaccess file. The most common commands have been covered here. A full list of configuration options can be found in the ftpaccess man page after you install the server.

You can edit the ftpaccess file at the command line to make configuration changes in any of these categories. The following sections describe some configuration changes and how to edit these files to accomplish them.

Configure Access Control Controlling which users can access the FTP server and how they can access it is a critical part of system security. Use the following entries in the ftpaccess file to specify to which group the user accessing the server is assigned.

autogroup []

If the anonymous user is a member of a group, he will only be allowed access to files and directories owned by him or his group. The group must be a valid group from /etc/groups. Define User Classes This command defines a class of users by the address to which the user is connected: class []

There might be multiple members for a class of users, and multiple classes might apply to individual members. When multiple classes apply to one user, the first class that applies will be used. The typelist field is a comma-separated list of the keywords anonymous, guest, and real. anonymous applies to the anonymous user, and guest applies to the guest access account,

18

Limit Access for Anonymous Users This command imposes increased security on the anonymous user:

450

CHAPTER 18


as specified in the guestgroup directive. real defines those users who have a valid entry in the /etc/passwd file. The addrglob field is a regular expression that specifies addresses to which the class is to be applied. The (*) entry specifies all hosts. Block a Host’s Access to the Server Sometimes it is necessary to block access to the server to entire hosts. This can be useful to protect the system from individual hosts or entire blocks of IP addresses, or to force the use of other servers. Use this command to do so: deny <message_file> deny will always deny access to hosts that match a given address. addrglob is a regular expression field that contains a list of addresses, either numeric or a DNS name. This field can also be a file reference that contains a listing of addresses. If an address is a file reference, it must be an absolute file reference; that is, starting with a /. To ensure that IP addresses can be mapped to a valid domain name, use the !nameserver parameter.

A sample deny line resembles the following: deny *.exodous.net /home/ftp/.message_exodous_deny

This entry denies access to the FTP server from all users who are coming from the exodous.net domain, and displays the message contained in the .message_exoduous_deny file in the /home/ftp directory.

ftpusers File Purpose Now Implemented in ftpaccess Certain accounts for the system to segment and separate tasks with specific permissions are created during Linux installation. The ftpusers file (located in /etc/ftpusers) is where accounts for system purposes are listed. It is possible that the version of wuftp you use with Ubuntu deprecates the use of this file, and instead implements the specific functionality of this file in the ftpaccess file with the commands of denyuid/deny-gid. Restrict Permissions Based on Group IDs The guestgroup line assigns a given group name or group names to behave exactly like the anonymous user. Here is the command: guestgroup []

This command confines the users to a specific directory structure in the same way anonymous users are confined to /var/ftp. This command also limits these users to access files for which their assigned group has permissions. The groupname parameter can be the name of a group or that group’s corresponding Group ID (GID). If you use a GID as the groupname parameter, put a percentage symbol (%)


451

in front of it. You can use this command to assign permissions to a range of group IDs, as in this example: guestgroup %500-550

This entry restricts all users with the group IDs 500–550 to being treated as a guest group, rather than individual users. For guestgroup to work, you must set up the user’s home directories with the correct permissions, exactly like the anonymous FTP user. Limit Permissions Based on Individual ID The guestuser line works exactly like the guestgroup command you just read about, except it specifies a User ID (UID) instead of a group ID. Here’s the command: guestuser <username> [<username>]

This command limits the guest user to files for which the user has privileges. Generally, a user has more privileges than a group, so this type of assignment can be less restrictive than the guestgroup line. Restrict the Number of Users in a Class The limit command restricts the number of users in a class during given times. Here is the command, which contains fields for specifying a class, a number of users, a time range, and the name of a text file that contains an appropriate message: limit <message_file>

If the specified number of users from the listed class is exceeded during the given time period, the user sees the contents of the file given in the message_file parameter.

limit anonymous 10 MoTuWeThFr,Sa0000-2300 /home/ftp/.message_limit_anon_class

This line limits the anonymous class to 10 concurrent connections on Monday through Friday, and on Saturday from midnight to 11:00 p.m. If the number of concurrent connections is exceeded or at 11:00 p.m. on Saturday, the users will see the contents of the file /home/ftp/.message_limit_anon_class. Syntax for finer control over limiting user connections can be found in the ftpaccess man page. Limit the Number of Invalid Password Entries This line allows control over how many times a user can enter an invalid password before the FTP server terminates the session: loginfails

18

The times parameter is somewhat terse. Its format is a comma-delimited string in the form of days, hours. Valid day strings are Su, Mo, Tu, We, Th, Fr, Sa, and Any. The hours are formatted in a 24-hour format. An example is as follows:

452

CHAPTER 18


The default for loginfails is set to 5. This command prevents users without valid passwords from experimenting until they “get it right.”

Configure User Information Providing users with information about the server and its use is a good practice for any administrator of a public FTP server. Adequate user information can help prevent user problems and eliminate tech support calls. You also can use this information to inform users of restrictions governing the use of your FTP server. User information gives you an excellent way to document how your FTP server should be used. You can use the commands detailed in the following sections to display messages to users as they log in to the server or as they perform specific actions. The following commands enable messages to be displayed to users when logging in to the server or when an action is performed. Display a Prelogin Banner This command is a reference to a file that is displayed before the user receives a login prompt from the FTP server: banner <path>

This file generally contains information to identify the server. The path is an absolute pathname relative to the system root (/), not the base of the anonymous FTP user’s home. The entry might look like this: banner /etc/uftp.banner

This example uses the file named uftp.banner under the /etc directory. The file can contain one or more lines of text, such as: Welcome to Widget, Inc.’s Red Hat Linux FTP server. This server is only for use of authorized users. Third-party developers should use a mirror site.

When an FTP user attempts to log in, the banner is displayed like so: $ ftp shuttle2 Connected to shuttle2.home.org. 220-Welcome to Widget, Inc.’s FTP server. 220-This server is only for use of authorized users. 220-Third-party developers should use a mirror site. 220220220 shuttle2 FTP server (Version wu-2.6.2-8) ready. 504 AUTH GSSAPI not supported. 504 AUTH KERBEROS_V4 not supported. KERBEROS_V4 rejected as an authentication type


453

Name (shuttle2:phudson):

NOTE Note that the banner does not replace the greeting text that, by default, displays the hostname and server information, such as: 220 shuttle2 FTP server (Version wu-2.6.2-8) ready.

To hide version information, use the greeting command in ftpaccess with a keyword, such as terse, like so: greeting terse

FTP users then see a short message like this as part of the login text: 220 FTP server ready.

Also, not all FTP clients can handle multiline responses from the FTP server. The banner <path> command is how the banner line passes the file contents to the client. If clients cannot interrupt multiline responses, the FTP server is useless to them. You should also edit the default banner to remove identity and version information. Display a File This line specifies a text file to be displayed to the user during login and when the user issues the cd command: message <path> {<when> { ...}}

The optional when clause can be LOGIN or CWD=(dir), where dir is the name of a directory that is current. The optional class parameter enables messages to be shown to only a given class or classes of users.

You can use magic cookies to breathe life into your displayed messages. Magic cookies are symbolic constants that are replaced by system information. Table 18.1 lists the message command’s valid magic cookies and their representations.

TABLE 18.1 Magic Cookies and Their Descriptions Cookie

Description

%T

Local time (form Thu Nov 15 17:12:42 1990)

%F

Free space in partition of CWD (kilobytes) [Not supported on all systems]

%C

Current working directory

%E

Maintainer’s email address as defined in ftpaccess

%R

Remote hostname

18

Using messages is a good way to give information about where things are on your site as well as information that is system dependent, such as alternative sites, general policies regarding available data, server availability times, and so on.

454

CHAPTER 18


TABLE 18.1 Magic Cookies and Their Descriptions Cookie

Description

%L

Local hostname

%u

Username as determined via RFC931 authentication

%U

Username given at login time

%M

Maximum allowed number of users in this class

%N

Current number of users in this class

%B

Absolute limit on disk blocks allocated

%b

Preferred limit on disk blocks

%Q

Current block count

%I

Maximum number of allocated inodes (+1)

%i

Preferred inode limit

%q

Current number of allocated inodes

%H

Time limit for excessive disk use

%h

Time limit for excessive files

Ratios %xu

Uploaded bytes

%xd

Downloaded bytes

%xR

Upload/download ratio (1:n)

%xc

Credit bytes

%xT

Time limit (minutes)

%xE

Elapsed time since login (minutes)

%xL

Time left

%xU

Upload limit

%xD

Download limit

To understand how this command works, imagine that you want to display a welcome message to everyone who logs in to the FTP server. An entry of: message /home/ftp/welcome.msg message /welcome.msg

login login

shows the contents of the welcome.msg file to all real users who log in to the server. The second entry shows the same message to the anonymous user. The welcome.msg file is not created with the installation of the package, but you can create it using a text editor. Type the following: Welcome to the anonymous ftp service on %L!

There are %N out of %M users logged in.


455

Current system time is %T Please send email to %E if there are any problems with this service. Your current working directory is %C

Save this file as /var/ftp/welcome.msg. Verify that it works by connecting to the FTP server: 220 FTP server ready. 504 AUTH GSSAPI not supported. 504 AUTH KERBEROS_V4 not supported. KERBEROS_V4 rejected as an authentication type Name (shuttle:phudson): anonymous 331 Guest login ok, send your complete e-mail address as password. Password: 230-Welcome to the anonymous ftp service on shuttle.home.org! 230230-There are 1 out of unlimited users logged in. 230230-Current system time is Mon Nov 3 10:57:06 2003 230230-Please send email to root@localhost if there are 230-any problems with this service. 230-Your current working directory is /

Display Administrator’s Email Address This line sets the email address for the FTP administrator:

This string is printed whenever the %E magic cookie is specified. This magic cookie is used in the messages line or in the shutdown file. You should display this string to users in the login banner message so that they know how to contact you (the administrator) in case of problems with the FTP server.

CAUTION Do not use your live email address in the display banner; you want others to be able to access user emails as necessary. Instead, use an alias address that routes the messages to the appropriate IT department or other address. Notify User of Last Modification Date The readme line tells the server whether a notification should be displayed to the user when a specific file was last modified. Here’s the command:

18

email

456

CHAPTER 18


readme <path> {<when {}}

The path parameter is any valid path for the user. The optional when parameter is exactly as seen in the message line. class can be one or more classes as defined in the class file. The path is absolute for real users. For the anonymous user, the path is relative to the anonymous home directory, which is /var/ftp by default.

Configure System Logging Part of any system administration involves reviewing log files for what the server is doing, who accessed it, what files were transferred, and other pieces of important information. You can use a number of commands within /etc/ftpacess to control your FTP server logging actions. Redirect Logging Records This line allows the administrator to redirect where logging information from the FTP server is recorded: log <syslog>{+<xferlog>}

By default, the information for commands is stored in /var/log/messages, although the man pages packaged in some packages state that this information is written to /var/log/xferlog. Check your server’s settings for information regarding the location of your file transfer logs. Log All User-Issued Commands This line enables logging for all commands issued by the user: log commands [] typelist is a comma-separated list of anonymous, guest, and real. If no typelist is given, commands are logged for all users. Some wu-ftpd packages set the logging of all file transfers to /var/log/xferlog (see the next section). However, you can add the log command to ftpaccess with the commands keyword to capture user actions. Logging is then turned on and user actions are captured in /var/log/messages. Here is a sample log file: Oct Oct Oct

6 12:21:42 shuttle2 ftpd[5229]: USER anonymous 6 12:21:51 shuttle2 ftpd[5229]: PASS [email protected] 6 12:21:51 shuttle2 ftpd[5229]: ANONYMOUS FTP LOGIN FROM 192.168.2.31

➥[192.168.2.31], [email protected]

Oct Oct

6 12:21:51 shuttle2 ftpd[5229]: SYST 6 12:21:54 shuttle2 ftpd[5229]: CWD pub

Oct Oct Oct

6 12:21:57 shuttle2 ftpd[5229]: PASV 6 12:21:57 shuttle2 ftpd[5229]: LIST 6 12:21:59 shuttle2 ftpd[5229]: QUIT

Oct

6 12:21:59 shuttle2 ftpd[5229]: FTP session closed


457

The sample log shows the username and password entries for an anonymous login. The CWD entry shows that a cd command is used to navigate to the pub directory. Note that the commands shown do not necessarily reflect the syntax the user typed, but instead list corresponding system calls the FTP server received. For example, the LIST entry is actually the ls command. Log Security Violations and File Transfers Two other logging commands are useful in the /etc/ftpaccess configuration file. This line enables the logging of security violations: log security []

Violations are logged for anonymous, guest, and real users, as specified in the typelist— the same as other log commands. If you do not specify a typelist, security violations for all users are logged. This line writes a log of all files transferred to and from the server: log transfers [ []] typelist is the same as seen in log commands and log security lines. directions is a

comma-separated list of the keywords inbound for uploaded files and outbound for downloaded files. If no directions are given, both uploaded and downloaded files are logged. Inbound and outbound logging is turned on by default.

Configure Permission Control

NOTE By default, all the ftpaccess file command lines prohibit anonymous users from executing actions and enable authorized users to do so. Allow Users to Change File Permissions The chmod line determines whether a user has the capability to change a file’s permissions. Here is the command line: chmod

This command acts the same as the standard chmod command. The yes|no parameter designates whether the command can be executed. typelist is a comma-delimited string of the keywords anonymous, guest, and real. If you do not specify

18

Controlling user activity is an important component of securing your system’s server. The ftpaccess file includes a number of commands that enable you to determine what users can and cannot execute during an FTP session. You can use these permission controls to allow users to change file permissions, delete or overwrite files, rename files, and create new files with default permissions. You learn how to use all these ftpaccess file command lines in the following sections.

458

CHAPTER 18


a typelist string, the command is applied to all users. An exhaustive description of its purpose and parameters can be found in the man page. Assign Users File-Delete Permission The delete line determines whether the user can delete files with the rm command. Here’s the command line: delete

The yes|no parameter is used to turn this permission on or off, and typelist is the same as the chmod command. Assign Users File-Overwrite Permission This command line of the ftpaccess file allows or denies users the ability to overwrite an existing file. Here’s the command line: overwrite

The FTP client determines whether users can overwrite files on their own local machines; this line specifically controls overwrite permissions for uploads to the server. The yes|no parameter toggles the permission on or off, and typelist is the same as seen in the chmod line. Allow Users to Rename Files You can enable or prevent a user from renaming files by using this command line: rename

The yes|no parameter toggles the permission on or off, and typelist is the same commadelimited string as seen in chmod. Allow Users to Compress Files This line determines whether the user is able to use the compress command on files: compress []

The yes|no parameter toggles the permission on or off, and classglob is a regular expression string that specifies one or more defined classes of users. The conversions that result from the use of this command are specified in the ftpconversions file, which contains directions on what compression or extraction command is to be used on a file with a specific extension, such as .Z for the compress command, .gz for the gunzip command, and so on. See the section “Configuring FTP Server File-Conversion Actions” later in this chapter. Assign or Deny Permission to Use tar This line determines whether the user is able to use the tar (tape archive) command on files: tar [ ...]


459

The yes|no parameter toggles the permission on or off, and classglob is a regular expression string that specifies one or more defined classes of users. Again, the conversions that result from the use of this command are specified in the ftpconversions file.

Determine What Permissions Can Apply to User-Created Upload Files This line is a bit different from the other commands in the permission control section. The umask command determines with what permissions a user can create new files; here it is. umask

The yes|no parameter toggles based on whether a user is allowed to create a file with his default permissions when uploading a file. Like the overwrite command you read about earlier in this section, this command line is specific to uploaded files because the client machine determines how new files are created from a download.

Configure Commands Directed Toward the cdpath This alias command allows the administrator to provide another name for a directory other than its standard name: alias <string>

The alias line applies to only the cd command. This line is particularly useful if a popular directory is buried deep within the anonymous FTP user’s directory tree. The following is a sample entry: alias linux-386 /pub/slackware/11/i386/

The cdpath line specifies the order in which the cd command looks for a given userentered string. The search is performed in the order in which the cdpath lines are entered in the ftpacess file. For example, if the following cdpath entries are in the ftpaccess file, cdpath /pub/slackware/ cdpath /pub/linux/

and the user types cd i386, the server searches for an entry in any defined aliases, first in the /pub/slackware directory and then in the /pub/linux directory. If a large number of aliases are defined, it is recommended that symbolic links to the directories be created instead of aliases. Doing so reduces the amount of work on the FTP server and decreases the wait time for the user.

18

This line would allow the user to type cd linux-386 and be automatically taken to the /pub/slackwase/11/i386 directory.

460

CHAPTER 18


Structure of the shutdown File The shutdown command tells the server where to look for the shutdown message generated by the ftpshut command or by the user. The shutdown command is used with a pathname to a shutdown file, such as: shutdown /etc/uftpshutdown

If this file exists, the server checks the file to see when the server should shut down. The syntax of this file is as follows: <month> <minute> <deny_offset> year can be any year after 1970 (called the epoch), month is from 0–11, hour is 0–23, and minute is 0–59. deny_offset is the number of minutes before shutdown in which the server will disable new connections. disc_offset is the number of minutes before connected users are disconnected, and text is the message displayed to the users at login. In addition to the valid magic cookies defined in the messages section, those listed in Table 18.2 are also available.

TABLE 18.2 Magic Cookies for the Shutdown File Cookie

Description

%s

The time the system will be shut down

%r

The time new connections will be denied

%d

The time current connections will be dropped

Configuring FTP Server File-Conversion Actions The FTP server can convert files during transfer to compress and uncompress files automatically. Suppose that the user is transferring a file to his Microsoft Windows machine that was TARed and GZIPed on a Linux machine. If the user does not have an archive utility installed to uncompress these files, he cannot access or use the files. As the FTP server administrator, you can configure the FTP server to automatically unarchive these files before download should the site support users who might not have unarchive capabilities. Additionally, you can configure an upload area for the users, and then configure the FTP server to automatically compress any files transferred to the server. The structure of the format of the ftpconversions file is: 1:2:3:4:5:6:7:8

where 1 is the strip prefix, 2 is the strip postfix, 3 is the add-on prefix, 4 is the add-on postfix, 5 is the external command, 6 is the types, 7 is the options, and 8 is the description.

Configuring FTP Server File-Conversion Actions

461

Strip Prefix The strip prefix is one or more characters at the beginning of a filename that should be automatically removed by the server when the file is requested. By specifying a given prefix to strip in a conversions rule, such as devel, the user can request the file devel_procman.tar.gz by the command get procman.tar.gz, and the FTP server performs any other rules that apply to that file and retrieve it from the server. Although this feature is documented, as of version 2.6.2, it has yet to be implemented.

Strip Postfix The strip postfix works much the same as the strip prefix, except that one or more characters are taken from the end of the filename. This feature is typically used to strip the .gz extension from files that have been TARed and GZIPed when the server is performing automatic decompression before sending the file to the client.

Add-On Prefix The add-on prefix conversion instructs the server to insert one or more characters to a filename before it is transferred to the server or client. For example, a user requests the file procman.tar.gz. The server has a conversion rule to add a prefix of gnome to all .tar.gz files; therefore the server would append this string to the file before sending it to the client. The user would receive a file called gnome_procman.tar.gz. Keywords such as uppercase and lowercase can be used in this function to change the case of the filename for those operating systems in which case makes a difference. Similar to the strip prefix conversion, this feature is not yet implemented in version 2.6.2.

Add-On Postfix

External Command The external command entries in the ftpconversions file contain the bulk of the FTP server conversion rules. The external command entry tells the server what should be done with a file after it is transferred to the server. The specified conversion utility can be any command on the server, although generally it is a compression utility. As the file is sent, the server passes the file through the external command. If the file is being uploaded to the server, the command needs to send the result to standard in, whereas a download sends the command to standard out. For example, here is an entry specifying the tar command:

18

An add-on postfix instructs the server to append one or more characters to the end of a filename during the transfer or reception of a file. A server can contain TARed packages of applications that are uncompressed. If an add-on postfix conversion was configured on the server, the server could compress the file, append a .gz extension after the file was compressed, and then send that file to the client. The server could also do the same action for uncompressed files sent to the server. This would have the effect of conserving disk space on the server.

CHAPTER 18

462

:


: :.tar:/bin/tar -c -f - %s:T_REG|T_DIR:O_TAR:TAR

The following sections describe the fields in a conversion entry. Types You must use the types field of the ftpconversions file to tell the server what types of files the conversion rules apply to. Separate the file type entries with the (|) character, and give each type a value of T_REG, T_ASCII, and T_DIR. T_REG signifies a regular file, T_ASCII an ASCII file, and T_DIR a directory. A typical entry is T_REG | T_ASCII, which signifies a regular ASCII file.

Options The options field informs the server what action is being done to the file. Similar to the types file, options are separated by the (|) character. Here are the valid ranges you can assign to items in the options field: . O_COMPRESS to compress the file . O_UNCOMPRESS to uncompress the file . O_TAR to tar the file An example of this field is O_COMPRESS | O_TAR, where files are both compressed and TARed. Description The description field allows an administrator to quickly understand what the rule is doing. This field does not have any syntax restriction, although it is usually a one-word entry— such as TAR, TAR+COMPRESS, or UNCOMPRESS—which is enough to get the concept across.

An Example of Conversions in Action Crafting complex conversion entries is a task perhaps best left to the Linux/Unix expert, but the sample ftpconversions file included with wu-ftpd provides more than enough examples for the average administrator. Building your own simple conversion entry is not really too difficult, so let’s examine and decode an example: :.Z:

:

:/bin/compress -d -c %s:T_REG|T_ASCII:O_UNCOMPRESS:UNCOMPRESS

In this example, the strip prefix (field 1) is null because it is not yet implemented, so this rule does not apply to prefixes. The second field of this rule contains the .Z postfix; therefore it deals with files that have been compressed with the compress utility. The rule does not address the add-on prefix or postfix, so fields 3 and 4 are null. Field 5, the external command field, tells the server to run the compress utility to decompress all files that have the .Z extension, as the -d parameter signifies. The -c option tells compress to write the output of the compress utility to the standard out, which is the server in this case. The %s is the name of the file against which the rule was applied. Field 6 specifies that this file is a regular file in ASCII format. Field 7, the options field, tells the server that this command uncompresses the file. Finally, the last field is a comment that gives the admin-

Using the ftphosts File to Allow or Deny FTP Server Connection

463

istrator a quick decode of what the conversion rule is doing—that is, uncompressing the file.

Examples Several conversion rules may be specified in wu-ftpd’s default ftpconversions file. Additional examples, such as for Sun’s Solaris operating system, might also be available in additional wu-ftpd documentation.

Using the ftphosts File to Allow or Deny FTP Server Connection The purpose of the ftphosts file is to allow or deny specific users or addresses from connecting to the FTP server. The format of the file is the word allow or deny, optionally followed by a username, followed by an IP or a DNS address. allow username address deny username address

Listing 18.3 shows a sample configuration of this file.

LISTING 18.3 ftphosts Configuration File for Allowing or Denying Users

deny anonymous *.pilot.net

The * is a wildcard that matches any combination of that address. For example, allow tdc *.exodous.net allows the user tdc to log in to the FTP server from any address that contains the domain name exodous.net. Similarly, the anonymous user is not allowed to access the FTP if he is coming from a 201 public class C IP address. Changes made to your system’s FTP server configuration files only become active after you restart inetd because configuration files are only parsed at startup. To restart inetd as root, issue the command /etc/init.d/inetutils-inetd restart. This makes a call to the same shell script that is called at system startup and shutdown for any runlevel to start or stop the inet daemon. inetd should report its status as # /etc/init.d/inetutils-inetd restart

18

# Example host access file # # Everything after a ‘#’ is treated as comment, # empty lines are ignored allow tdc 128.0.0.1 allow tdc 192.168.101.* allow tdc insanepenguin.net allow tdc *.exodous.net deny anonymous 201.*

464

CHAPTER 18


Stopping internet superserver inetd: Starting internet superserver inetd:

[ [

OK OK

Once restarted, the FTP server is accessible to all incoming requests.

Using Commands for Server Administration wu-ftp provides a few commands to aid in server administration. Those commands are:

. ftpwho—Displays information about current FTP server users . ftpcount—Displays information about current server users by class . ftpshut—Provides automated server shutdown and user notification . ftprestart—Provides automated server restart and shutdown message removal Each of these commands must be executed with superuser privileges because they reference the ftpaccess configuration file to obtain information about the FTP server.

Display Information About Connected Users The ftpwho command provides information about who are users currently connected to the FTP server. Here’s the command line: /usr/bin/ftpwho

Table 18.3 shows the format of the output ftpwho displays.

TABLE 18.3 ftpwho Fields Name

Description

Process ID

The process ID of the FTP server process.

TTY

The terminal ID of the process. This is always a ? because the FTP daemon is not an interactive login.

Status

The status of the FTP process. The values are S: Sleeping Z: Zombie, indicating a crash R: Running N: Normal process

Time

The elapsed processor time the process has used in minutes and seconds.

Details

Tells from what host the process is connecting, the user who connected, and the currently executing command.

Listing 18.4 shows a typical output of this command. It lists the process ID for the ftp daemon handling requests, the class to which the particular user belongs, the total time connected, the connected username, and the status of the session.

] ]

Using Commands for Server Administration

465

In addition to the information given about each connected user, ftpwho also displays the total number of users connected out of any maximum that might have been set in the ftpaccess file. This information can be used to monitor the use of your FTP server. You can pass one parameter to ftpwho. (You can find the parameter by using the ftpwho-help command.) The single parameter you can pass to ftpwho is -v. This parameter prints out version and licensing information for wu-ftp, as shown here: # ftpwho Service class all: 10447 ? SN 1 users (no maximum)

0:00 ftpd: localhost: anonymous/winky IDLE

The output of ftpwho, using the -V option, which shows version information, is shown in Listing 18.4.

LISTING 18.4 ftpwho -V Command Output Copyright © 1999,2000,2001 WU-FTPD Development Group. All rights reserved. Portions Copyright © 1980, 1985, 1988, 1989, 1990, 1991, 1993, 1994 The Regents of the University of California. Portions Copyright © 1993, 1994 Washington University in Saint Louis. Portions Copyright © 1996, 1998 Berkeley Software Design, Inc. Portions Copyright © 1989 Massachusetts Institute of Technology. Portions Copyright © 1998 Sendmail, Inc. Portions Copyright © 1983, 1995, 1996, 1997 Eric P. Allman. Portions Copyright © 1997 by Stan Barber. Portions Copyright © 1997 by Kent Landfield. Portions Copyright © 1991, 1992, 1993, 1994, 1995, 1996, 1997

Use and distribution of this software and its source code are governed by the terms and conditions of the WU-FTPD Software License (“LICENSE”). If you did not receive a copy of the license, it may be obtained online at http://www.wu-ftpd.org/license.html. Version wu-2.6.2-8

Count the Number of Connections /usr/bin/ftpcount counts the number of connected users to the FTP server and the maximum number of users allowed. This same information is found at the end of the output for the ftpwho command. This command takes only one parameter, -V, which displays the same output as the previous ftpwho example.

18

Free Software Foundation, Inc.

466

CHAPTER 18

# ftpcount Service class all


-

4 users (no maximum)

Use /usr/sbin/ftpshut to Schedule FTP Server Downtime As with any public server administration, it is always good practice to let users of the FTP server know about upcoming outages, when the server will be updated, and other relevant site information. The ftpshut command allows the administrator to let the FTP server do much of this automatically. The ftpshut command enables the administrator to take down the FTP server at a specific time, based on some parameters passed to it. The format of the command is as follows and is documented in the ftpshut man page: ftpshut

[ -V ] [ -l min] [ -d min] time [ warning-message ... ]

The -V parameter displays the version information of the command. The time parameter is the time when the ftpshut command will stop the FTP servers. This parameter takes either a + number for the number of minutes from the current time, or a specific hour and minute in 24-hour clock format with the syntax of HH:MM. The -l parameter enables the FTP server administrator to specify how long, in minutes, before shutdown the server will disable new connections. The default for this is 10 minutes. If the time given to shut down the servers is less than 10 minutes, new connections will be disabled immediately. The -d parameter is similar to the -l parameter, but controls when the FTP server terminates the current connections. By default, this occurs five minutes before the server shuts down. If the shutdown time is less than five minutes, the server terminates the current connections immediately. When you execute this command, the FTP server creates a file containing the shutdown information in the location specified under the shutdown section in the ftpaccess file. The default configuration for this file is /etc/shutmsg. If you execute the ftpshut command with warning messages, the messages are displayed when the user logs in to the server. Name (pheniox:tdc): anonymous 331 Guest login ok, send your complete e-mail address as password. Password: 230-system doing down at Mon Sep 3 06:23:00 2001 230-0 users of unlimited on pheniox. 230 Guest login ok, access restrictions apply. Remote system type is UNIX. Using binary mode to transfer files.


467

Here is a sample ftpshut command: ftpshut -l 5 -d 5 +10 “system going down at %s %N users of %M on %R”

This command tells the FTP server to disconnect new connections in 5 minutes, drop all current connections in 5 minutes, shut down the server in 10 minutes, and display a warning message to the users at login. The message can be a mixture of text and magic cookies defined in Table 18.4. It is important to keep in mind that the message can only be a maximum of 75 characters in length. Additionally, it is not important to know how many characters the magic cookies will take because the system knows this information and truncates the message at 75 characters.

TABLE 18.4 Magic Cookies for the ftpshut Command Cookie

Description

%s

Time the system will be shut down

%r

Time new connections will be denied

%d

Time current connections will be dropped

%C

Current working directory

%E

Server administrator’s email address as specified in the ftpaccess file

%F

Available free space in the current working directories partition, in kilobytes

%L

Local host time

%M

Maximum number of allowed connections in this user class

%N

Current number of connections for this user class

%R

Remote hostname

%T

Local time, in the form of Fri Aug 31 21:04:00 2001

%U

Username given at login

18 When ftpshut is issued to the system, it creates a file that stores the necessary information. The ftprestart command removes this file for all servers, either canceling the impending shutdown or removing the shutdown file and restarting the FTP server. The ftprestart has only one optional argument, -V, to show version information.

Use /var/log/xferlog to View a Log of Server Transactions The xferlog file gives a log of what transactions have occurred with the FTP server. Depending on the settings in the /etc/ftpaccess file, the contents of this file can contain the files sent or received, by whom, with a date stamp. Table 18.5 lists the fields of this file. The same information can also be found in the corresponding man page included in the wu-ftp.

468

CHAPTER 18


TABLE 18.5 /var/log/xferlog Fields Field

Description

current-time

Current local time in the form of DDD MMM dd hh:mm:ss YYYY, where DDD is the day of the week, MMM is the month, dd is the day of the month, hh is the hour, mm is the minutes, ss is the seconds, and YYYY is the year.

transfer-time

Total time in seconds for the transfer.

remote-host

Remote hostname.

file-size

Size of the transferred file in bytes.

filename

Name of the file.

transfer-type

A single character indicating the transfer type. The types are a for ASCII transfers b for binary transfers

special-action-flag

One or more character flags indicating any special action taken by the server. The values are C for compressed files U for uncompressed files T for TARed files - for no special action taken

direction

Indicates whether the file was sent from or received by the server.

access-mode

The way in which the user logged in to the server. The values are a for an anonymous guest user g for a guest user, corresponding to the guestgroup command in the /etc/ftpaccess file

r for a real user on the local machine username

If logged in as a real user, the username. If the access mode was guest, the password is given.

service-name

The name of the service used, usually FTP.

authentication-method

Type of authentication used. The values are 0 for none


469

TABLE 18.5 /var/log/xferlog Fields Field

Description 1 for RFC931 authentication (a properly formed email address)

authenticated-user-id

This is the user ID returned to the server based on the authentication method used to access the server. An * is used when an authenticated user ID cannot be found.

completion-status

A single-character field indicating the status of the transfer. The values are c for a completed transfer i for an incomplete transfer

An example of this file is seen in Listing 18.5.

LISTING 18.5 Sample /var/log/xferlog File with Inbound and Outbound Logging Mon Sep 3 07:13:05 2001 1 localhost.localdomain 100 /var/ftp/pub/README b o a [email protected] ftp 0 * c Mon Sep 3 02:35:35 2001 1 helios 8 /var/ftp/pub/configuration a _ o a [email protected] ftp 0 * c Mon Sep 3 02:35:35 2001 1 helios 8 /var/ftp/pub/temp.txt a o a [email protected] ftp 0 * c Mon Sep 3 02:35:35 2001 1 helios 8 /var/ftp/pub/tftp-server0.17-14.i386.rpm a o a [email protected] ftp 0 * c Mon Sep 3 02:35:35 2001 1 helios 8 /var/ftp/pub/wu-ftpd-2.6.122.i386.rpm a

o a [email protected] ftp 0 * c

18

Related Ubuntu and Linux Commands You use these commands to install, configure, and manage FTP services in Ubuntu: . epiphany—A graphical GNOME browser supporting FTP . ftp—A text-based interactive FTP command . ftpcopy—Copy directories and files from an FTP server . ftpcp—Retrieve data from a remote FTP server, but do not overwrite existing local files . gftp—A graphical FTP client for GNOME . konqueror—KDE’s graphical web browser . lftp—An advanced text-based FTP program

470

CHAPTER 18


. nautilus—Gnome’s graphical file explorer and browser . ncftp—A sophisticated, text-based FTP program . sftp—Secure file transfer program . smbclient—Samba FTP client to access SMB/CIFS resources on servers . vsftpd—The Very Secure FTP daemon . webcam—A webcam-oriented FTP client included with xawtv

Reference . http://www.wu-ftpd.org/—Official Wu-FTP website. . http://www.cert.org/—Computer Emergency Response Team. . http://www.openssh.com/—The OpenSSH home page and source for the latest version of OpenSSH and its component clients, such as sftp. . http://www.cert.org/tech_tips/anonymous_ftp_config.html—CERT Anonymous FTP configuration guidelines. . http://vsftpd.beasts.org/—Home page for the vsftd FTP server. . ftp://vsftpd.beasts.org/users/cevans/—Download site for the latest releases of the vsftpd server.

CHAPTER

19


IN THIS CHAPTER . How Email Is Sent and Received . Basic Postfix Configuration and Operation . Using Fetchmail to Retrieve Mail . Choosing a Mail Delivery Agent . Mail Daemons

Email is still the dominant form of communication over the Internet. It is fast, free, and easy to use. However, much of what goes on behind the scenes is extremely complicated and would appear scary to anyone who does not know much about how email is handled. Ubuntu comes equipped with a number of powerful applications that will help you build anything from a small email server, right through to large servers able to handle thousands of messages. This chapter shows you how to configure Ubuntu to act as an email server. We look at the options available in Ubuntu and examine the pros and cons of each one. You will also learn how mail is handled in Linux, and to a lesser extent, UNIX.

How Email Is Sent and Received Email is transmitted as plain text across networks around the world using the SMTP protocol (Simple Mail Transfer Protocol). As the name implies, the protocol itself is fairly basic, and it has been extended to add further authentication and error reporting/messaging to satisfy the growing demands of modern email. Mail transfer agents, or MTAs, work in the background transferring email from server to server allowing emails to be sent all over the world. You may have come across such MTA software such as Sendmail, Postfix, Fetchmail, Exim, or Qmail. SMTP allows each computer that the email passes through to forward it in the right direction to the final destination. When you consider the millions of email servers across the world, you have to marvel at how simple it all seems.

. Alternatives to Microsoft Exchange Server . Reference

472

CHAPTER 19


Here is a simplified example of how email is successfully processed and sent to its destination: 1. [email protected] composes and sends an email message to [email protected]. 2. The MTA at hudson.org receives Andrew’s email message and queues it for delivery behind any other messages that are also waiting to go out. 3. The MTA at hudson.org contacts the MTA at hudzilla.org on port 24. After hudzilla.org acknowledges the connection, the MTA at hudson.org sends the mail message. After hudzilla.org accepts and acknowledges receipt of the message, the connection is closed. 4. The MTA at hudzilla.org places the mail message into Paul’s incoming mailbox; Paul is notified that he has new mail the next time he logs on. Of course, several things can go wrong during this process. Here are a few examples: What if Paul does not exist at hudzilla.org? In this case, the MTA at hudzilla.org will reject the email and notify the MTA at hudson.org of what the problem is. The MTA at hudson.org will then generate an email message and send it to [email protected], informing him that no Paul exists at hudzilla.org (or perhaps just silently discard the message and give the sender no indication of the problem, depending on how the email server is configured). What happens if hudzilla.org doesn’t respond to hudson.org’s connection attempts? (Perhaps the server is down for maintenance.) The MTA at hudson.org notifies the sender that the initial delivery attempt has failed. Further attempts will be made at intervals decided by the server administrator until the deadline is reached, and the sender will be notified that the mail is undeliverable.

The Mail Transport Agent Several MTAs are available for Ubuntu, each with its pros and cons. Normally they are hidden under the skin of Ubuntu, silently moving mail between servers all over the world with need for little or no maintenance. Some MTAs are extremely powerful, being able to cope with hundreds of thousands of messages each day, whereas some are more geared toward smaller installations. Other MTAs are perhaps not as powerful, but are packed full with features. In the next section, we take a look at some of the more popular MTAs available for Ubuntu. Postfix Postfix has its origins as the IBM Secure Mailer, but was released to the community by IBM. Compared to Sendmail, it is much easier to administer and has a number of speed advantages. Postfix offers a pain-free replacement for Sendmail, and you are able to literally replace Sendmail with Postfix without the system breaking a sweat. In fact, the applications that rely on Sendmail will automatically use Postfix instead and carry on working correctly (because Postfix uses a Sendmail wrapper, which deceives other programs into thinking that Postfix is Sendmail). This wrapper, or more correctly interface, makes switching to Postfix extremely easy if you are already running Sendmail. Postfix also

How Email Is Sent and Received

473

happens to be the MTA of choice for Ubuntu, so it is this one that we spend more time on later in this chapter. For enhanced security, many Postfix processes used to use the chroot facility (which restricts access to only specific parts of the file system) for improved security, and there are no setuid components in Postfix. With the current release of Ubuntu, a chroot configuration is no longer used and is, in fact, discouraged by the Postfix author. You can manually reconfigure Postfix to a chroot configuration, but that is no longer supported by Ubuntu. If you are starting from scratch, Postfix is considered a better choice than Sendmail. Sendmail Sendmail handles the overwhelming majority of emails transmitted over the Internet today. It is extremely popular across the Linux/UNIX/BSD world and is well supported. A commercial version is available that has a GUI interface for ease of configuration. As well as being popular, Sendmail is particularly powerful compared to some of the other MTAs. However, it is not without its downsides, and you will find that other MTAs can handle more email per second in a larger environment. The other issue with Sendmail is that it can be extremely complicated to set it up exactly as you want it. A few books are available specifically for Sendmail, but the most popular one has more than a thousand pages, reflecting the complex nature of Sendmail configuration. We can be thankful, however, that the default configuration for Sendmail works fine for most basic installations out of the box, making further configurations unnecessary. Even if you want to use it as a basic email server, you only need to do some minor tweaks. The level of complexity associated with Sendmail often leads to system administrators replacing it with one of the other alternatives that is easier to configure. Qmail and Exim Qmail is a direct competitor to Postfix but is not provided with Ubuntu. Qmail is designed to be easier to use than Sendmail, as well as faster and more secure. However, Qmail isn’t a drop-in replacement for Sendmail, so migrating an existing Sendmail installation to Qmail is not quite as simple as migrating from Sendmail to Postfix. Qmail is relatively easy to administer, and it integrates with a number of software add-ons, including web mail systems and POP3 servers. Qmail is available from http://www.qmail.org/.

MDIR Versus Mailbox Qmail also introduced maildir, which is an alternative to the standard UNIX method of storing incoming mail. maildir is a more versatile system of handling incoming email, but it requires your email clients to be reconfigured, and it is not compatible with the traditional UNIX way of storing incoming mail. You will need to use mail programs that recognize the maildir format. (The modern programs do.)

19

Exim is yet another MTA, and it is available at http://www.exim.org/. Exim is considered faster and more secure that Sendmail or Postfix, but is much different to configure that either of those. Exim and Qmail use the maildir format rather than mbox, so both are considered “NFS safe” (see the following sidebar).

474

CHAPTER 19


The traditional mbox format keeps all mail assigned to a folder concatenated as a single file and maintains an index of individual emails. With maildir, each mail folder has three subfolders: /cur, /new, and /tmp. Each email is kept in a separate, unique file. If you are running a mail server for a large number of people, you should select a file system that can efficiently handle a large number of small files. mbox does offer one major disadvantage. While you are accessing the monolithic mbox

file that contains all your email, suppose that some type of corruption occurs, either to the file itself or to the index. Recovery from this problem can prove difficult. The mbox files are especially prone to problems if the files are being accessed over a network and can result in file corruption; one should avoid accessing mbox mail mounted over NFS, the Network File System, because file corruption can occur. Depending on how you access your mail, maildir does permit the simultaneous access of maildir files by multiple applications; mbox does not. The choice of a mail user agent (MUA), or email client, also affects your choice of mail directory format. For example, the pine program does not cache any directory information and must reread the mail directory any time it accesses it. If you are using pine, maildir is a poor choice. More-advanced email clients perform caching, so maildir might be a good choice, although the email client cache can get out of synchronization. It seems that no perfect choice exists. Ubuntu provides you with mail alternatives that have both strong and weak points. Be aware of the differences among the alternatives and frequently reevaluate your selection to make certain that it is the best one for your circumstances.

Choosing an MTA Other MTAs are available for use with Ubuntu, but those discussed in the previous sections are the most popular. Which one should you choose? That depends on what you need to do. Postfix’s main strengths is that it scales well and can handle large volumes of email at high speeds, not to mention that it is much easier to configure than the more cryptic Sendmail. However, you may find that there are specific things that you need that only Sendmail can provide. It is easy to switch between MTAs when you need to.

The Mail Delivery Agent SMTP is a server-to-server protocol that was designed to deliver mail to systems that are always connected to the Internet. Dial-up systems only connect at the user’s command; they connect for specific operations, and are frequently disconnected. To accommodate this difference, many mail systems also include a mail delivery agent, or MDA. The MDA transfers mail to systems without permanent Internet connections. The MDA is similar to an MTA (see the following note), but does not handle deliveries between systems and does not provide an interface to the user.

How Email Is Sent and Received

475

NOTE Procmail or Spamassassin are examples of MTAs; both provide filtering services to the MTA while they store messages locally and then make them available to the MUA or email client for reading by the user.

The MDA uses the POP3 or IMAP protocols for this process. In a manner similar to a post office box at the post office, POP3 and IMAP implement a “store and forward” process that alleviates the need to maintain a local mail server if all you want to do is read your mail. For example, dial-up Internet users can intermittently connect to their ISP’s mail server to retrieve mail using Fetchmail—the MDA recommended by Ubuntu (see the section “Using Fetchmail to Retrieve Mail” later in this chapter).

The Mail User Agent The mail user agent, or MUA, is another necessary part of the email system. The MUA is a mail client, or mail reader, that allows the user to read and compose email and provides the user interface. (It is the email application itself that most users are familiar with as “email.”) Some popular UNIX command-line MUAs are elm, pine, and mutt. Ubuntu also provides modern GUI MUAs: Evolution, Thunderbird, Mozilla Mail, Balsa, Sylpheed, and KMail. For comparison, common non-UNIX MUAs are Microsoft Outlook, Outlook Express, Pegasus, Eudora, and Netscape Messenger. The Microsoft Windows and Macintosh MUAs often include some MTA functionality; UNIX does not. For example, Microsoft Outlook can connect to your Internet provider’s mail server to send messages. On the other hand, UNIX MUAs generally rely on an external MTA such as Sendmail. This might seem like a needlessly complicated way to do things, and it is if used to connect a single user to her ISP. For any other situation, however, using an external MTA allows you much greater flexibility because you can use any number of external programs to handle and process your email functions and customize the service. Having the process handled by different applications gives you great control over how you provide email service to users on your network, as well as to individual and small office/home office (SOHO) users. For example, you could do the following:

. Use Sendmail to send your mail . Use xbiff to notify you when you have new mail . Use Fetchmail to retrieve your mail from a remote mail server . Use Procmail to automatically sort your incoming mail based on sender, subject, or many other variables . Use Spamassassin to eliminate the unwanted messages before you read them

19

. Use Evolution to read and compose mail

476

CHAPTER 19


Basic Postfix Configuration and Operation Because Postfix is the Ubuntu-recommended MTA, the following sections provide a brief explanation and examples for configuring and operating your email system. As mentioned earlier, however, Postfix is an extremely complex program with many configuration options. As such, this chapter only covers some of the basics. For more information on Postfix, as well as other MTAs, see the “Reference” section at the end of this chapter. Postfix configuration is handled by files in the /etc/postfix directory with much of the configuration being handled by the file main.cf. The actual syntax of the configuration file, main.cf, is fairly easy to read (see the following example): # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA’s job. append_dot_mydomain = no # Uncomment the next line to generate “delayed mail” warnings #delay_warning_time = 4h # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${queue_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${queue_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = optimus alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases mydestination = optimus, localhost.localdomain, , localhost relayhost = mynetworks = 127.0.0.0/8 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all

Basic Postfix Configuration and Operation

477

Complicated email server setup is beyond the scope of this book, and we would point you in the direction of Postfix: The Definitive Guide by Dent. This is a great reference, and rather unusual because it only runs to just under 300 pages. However, if you want to know something about Postfix, this is the book to read. However, the following five sections address some commonly used advanced options.

Configuring Masquerading Sometimes you might want to have Postfix masquerade as a host other than the actual hostname of your system. Such a situation could occur if you have a dial-up connection to the Internet and your ISP handles all your mail for you. In this case, you will want Postfix to masquerade as the domain name of your ISP. For example masquerade_domains = hudson.com

will strip any messages that come from andrew.hudson.com to just hudson.com.

Using Smart Hosts If you do not have a full-time connection to the Internet, you will probably want to have Postfix send your messages to your ISP’s mail server and let it handle delivery for you. Without a full-time Internet connection, you could find it difficult to deliver messages to some locations (such as some underdeveloped areas of the world where email services are unreliable and sporadic). In those situations, you can configure Postfix to function as a smart host by passing email on to another sender instead of attempting to deliver the email directly. You can use a line such as the following in the main.cf file to enable a smart host: relayhost = mail.isp.net

This line causes Postfix to pass any mail it receives to the server mail.isp.net rather than attempt to deliver it directly. Smart hosting will not work for you if your ISP, like many others, blocks any mail relaying. Some ISPs block relaying because it is frequently used to disseminate spam.

As mentioned earlier, Postfix typically attempts to deliver messages as soon as it receives them, and again at regular intervals after that. If you have only periodic connections to the Internet, as with a dial-up connection, you likely would prefer that Sendmail hold all messages in the queue and attempt to deliver them whenever you connect to your ISP. You can configure Postfix to do so by adding the following line to /etc/ppp/peers/ppp0: /usr/sbin/sendmail =q

19

Setting Message Delivery Intervals

478

CHAPTER 19


This line causes Postifix to automatically send all mail when connecting to your ISP. However, Postfix will still attempt to send mail regardless of whether the computer is on or off line, meaning that your computer may dial out just to send email. To disable this, you need to enter the following line into mail.cf: defer_transports = smtp

This stops any unwanted telephone calls from being placed!

TIP If you use networking over a modem, there is a configuration file for pppd called ppp0, which is located in /etc/ppp/peers. Any commands in this file automatically run each time the PPP daemon is started. You can add the line sendmail -q to this file to have your mail queue automatically processed each time you dial up your Internet connection.

Mail Relaying By default, Postfix will not relay mail that did not originate from the local domain. This means that if a Postfix installation running at hudson.org receives mail intended for hudzilla.org, and that mail did not originate from hudson.org, the mail will be rejected and will not be relayed. If you want to allow selected domains to relay through you, add an entry for the domain to the main.cf file like so: mynetworks = 192.168.2.0/24, 10.0.0.2/24, 127.0.0.0/8

The IP address needs to be specified in CIDR format. For a handy calculator, head on over to http://www.subnet-calculator/cidr.php. You must restart Postfix for this change to take effect.

CAUTION You need a good reason to relay mail; otherwise, do not do it. Allowing all domains to relay through you will make you a magnet for spammers who will use your mail server to send spam. This can lead to your site being blacklisted by many other sites, which then will not accept any mail from you or your site’s users—even if the mail is legitimate!

Forwarding Email with Aliases Aliases allow you to have an infinite number of valid recipient addresses on your system, without having to worry about creating accounts or other support files for each address. For example, most systems have “postmaster” defined as a valid recipient, but do not have an actual login account named “postmaster.” Aliases are configured in the file /etc/aliases. Here is an example of an alias entry: postmaster: root

This entry forwards any mail received for “postmaster” to the root user. By default, almost all the aliases listed in the /etc/aliases file forward to root.

Using Fetchmail to Retrieve Mail

479

CAUTION Reading email as root is a security hazard; a malicious email message can exploit an email client and cause it to execute arbitrary code as the user running the client. To avoid this danger, you can forward all of root’s mail to another account and read it from there. You can choose one of two ways for doing this. You can add an entry to the /etc/aliases file that sends root’s mail to a different account. For example, root: foobar would forward all mail intended for root to the account foobar. The other way is to create a file named .forward in root’s home directory that contains the address that the mail should forward to.

Anytime you make a change to the /etc/aliases file, you will need to rebuild the aliases database before that change will take effect. This is done with the following: $ sudo newaliases

Using Fetchmail to Retrieve Mail SMTP is designed to work with systems that have a full-time connection to the Internet. What if you are on a dial-up account? What if you have another system store your email for you and then you log in to pick it up once in awhile? (Most users who are not setting up servers will be in this situation.) In this case, you cannot easily receive email using SMTP, and you need to use a protocol, such as POP3 or IMAP, instead.

NOTE Remember when we said that some mail clients can include some MTA functionality? Microsoft Outlook and Outlook Express can be configured to use SMTP and, if you use a dial-up connection, will offer to start the connection and then use SMTP to send your mail, so a type of MTA functionality is included in those mail clients.

19 Unfortunately, many MUAs do not know anything about POP3 or IMAP. To eliminate that problem, you can use a program called Fetchmail to contact mail servers using POP3 or IMAP, download mail off the servers, and then inject those messages into the local MTA just as if they had come from a standard SMTP server. The following sections explain how to install, configure, and use the Fetchmail program.

Installing Fetchmail Similar to other packages, Fetchmail can be installed using either synaptic or apt-get. You can get the latest version of Fetchmail at http://www.catb.org/~esr/fetchmail.

480

CHAPTER 19


Configuring Fetchmail After you have installed Fetchmail, you must create the file .fetchmailrc in your home directory, which provides the configuration for the Fetchmail program. You can create and subsequently edit the .fetchmailrc file by using any text editor. The configuration file is straightforward and quite easy to create; the following sections explain the manual method for creating and editing the file. The information presented in the following sections does not discuss all the options available in the .fetchmailrc file, but covers the most common ones needed to get a basic Fetchmail installation up and running. You must use a text editor to create the file to include entries like the ones shown as examples—modified for your personal information, of course. For advanced configuration, see the man page for Fetchmail. The man page is well written and documents all the configuration options in detail.

CAUTION The .fetchmailrc file is divided into three different sections: global options, mail server options, and user options. It is important that these sections appear in the order listed. Do not add options to the wrong section. Putting options in the wrong place is one of the most common problems that new users make with Fetchmail configuration files.

Configuring Global Options The first section of .fetchmailrc contains the global options. These options affect all the mail servers and user accounts that you list later in the configuration file. Some of these global options can be overridden with local configuration options, as you learn later in this section. Here is an example of the options that might appear in the global section of the .fetchmailrc file: set daemon 600 set postmaster foobar set logfile ./.fetchmail.log

The first line in this example tells Fetchmail that it should start in daemon mode and check the mail servers for new mail every 600 seconds, or 10 minutes. Daemon mode means that after Fetchmail starts, it will move itself into the background and continue running. Without this line, Fetchmail would check for mail once when it started and would then terminate and never check again. The second option tells Fetchmail to use the local account foobar as a last-resort address. In other words, any email that it receives and cannot deliver to a specified account should be sent to foobar. The third line tells Fetchmail to log its activity to the file ./.fetchmail.log. Alternatively, you can use the line set syslog—in which case, Fetchmail will log through the syslog facility.

Using Fetchmail to Retrieve Mail

481

Configuring Mail Server Options The second section of the .fetchmailrc file contains information on each of the mail servers that should be checked for new mail. Here is an example of what the mail section might look like: poll mail.samplenet.org proto pop3 no dns

The first line tells Fetchmail that it should check the mail server mail.samplenet.org at each poll interval that was set in the global options section (which was 600 seconds in our example). Alternatively, the first line can begin with skip. If a mail server line begins with skip, it will not be polled as the poll interval, but will only be polled when it is specifically specified on the Fetchmail command line. The second line specifies the protocol that should be used when contacting the mail server. In this case, we are using the POP3 protocol. Other legal options are IMAP, APOP, and KPOP. You can also use AUTO here—in which case, Fetchmail will attempt to automatically determine the correct protocol to use with the mail server. The third line tells Fetchmail that it should not attempt to do a Dynamic Name Server (DNS) lookup. You will probably want to include this option if you are running over a dial-up connection.

Configuring User Accounts The third and final section of .fetchmailrc contains information about the user account on the server specified in the previous section. Here is an example: user foobar pass secretword fetchall flush

The third line tells Fetchmail that it should fetch all messages from the server, even if they have already been read. The fourth line tells Fetchmail that it should delete the messages from the mail server after it has completed downloading them. This is the default, so we would not really have to specify this option. If you want to leave the messages on the server after downloading them, use the option no flush.

19

The first line, of course, simply specifies the username that is used to log in to the email server, and the second line specifies the password for that user. Many security conscious people cringe at the thought of putting clear-text passwords in a configuration file, and they should if it is group or world readable. The only protection for this information is to make certain that the file is readable only by the owner; that is, with file permissions of 600.

482

CHAPTER 19


The configuration options you just inserted configured the entire .fetchmailrc file to look like this: set daemon 600 set postmaster foobar set logfile ./.fetchmail.log poll mail.samplenet.org proto pop3 no dns user foobar pass secretword fetchall flush

This file tells Fetchmail to do the following: . Check the POP3 server mail.samplenet.org for new mail every 600 seconds. . Log in using the username foobar and the password secretword. . Download all messages off the server. . Delete the messages from the server after it has finished downloading them. . Send any mail it receives that cannot be delivered to a local user to the account foobar. As mentioned before, many more options can be included in the .fetchmailrc file than are listed here. However, these options will get you up and running with a basic configuration. For additional flexibility, you can define multiple .fetchmailrc files to retrieve mail from different remote mail servers while using the same Linux user account. For example, you can define settings for your most often used account and save them in the default .fetchmailrc file. Mail can then quickly be retrieved like so: $ fetchmail –a 1 message for andrew at mail.ourphotos.me.uk (1108 octets). reading message 1 of 1 (1108 octets) . flushed

By using Fetchmail’s -f option, you can specify an alternative resource file and then easily retrieve mail from another server, as follows: $ fetchmail –f .myothermailrc 2 messages for andrew at anrew.hudson.com (5407 octets). reading message 1 of 2 (3440 octets) ... flushed reading message 2 of 2 (1967 octets) . flushed You have new mail in /var/spool/mail/andrew

Choosing a Mail Delivery Agent

483

By using the -d option, along with a time interval (in seconds), you can use Fetchmail in its daemon, or background mode. The command will launch as a background process and retrieve mail from a designated remote server at a specified interval. For more-advanced options, see the Fetchmail man page, which is well written and documents all options in detail.

CAUTION Because the .fetchmailrc file contains your mail server password, it should be readable only by you. This means that it should be owned by you and should have permissions no greater than 600. Fetchmail will complain and refuse to start if the .fetchmailrc file has permissions greater than this.

Choosing a Mail Delivery Agent Because of the modular nature of mail handling, it is possible to use multiple applications to process mail and accomplish more than simply deliver it. Getting mail from the storage area and displaying it to the user is the purpose of the MDA. MDA functionality can be found in some of the mail clients (MUAs), which can cause some confusion to those still unfamiliar with the concept of UNIX mail. As an example, the Procmail MDA provides filtering based on rulesets; KMail and Evolution, both MUAs, provide filtering, but the MUAs pine, mutt, and Balsa do not. Some MDAs perform simple sorting, and other MDAs are designed to eliminate unwanted emails, such as spam and viruses. You would choose an MDA based on what you want to do with your mail. We will look at five MDAs that offer functions you might find useful in your particular situation. If you have simple needs (just organizing mail by rules), one of the MUAs that offers filtering might be better for your needs. Ubuntu provides the Evolution MUA as the default selection (and it contains some MDA functionality as previously noted), so try that first and see whether it meets your needs. If not, investigate one of the following MDAs provided by Ubuntu.

Procmail As a tool for advanced users, the Procmail application acts as a filter for email as it is retrieved from a mail server. It uses rulesets (known as recipes) as it reads each email message. No default configuration is provided; you must manually create a ~/.procmail file for each user, or each user can create her own.

19

Unless otherwise noted, all the MDA software is provided through synaptic and apt-get. Chapter 31, “Managing Software,” details the general installation of any software.

484

CHAPTER 19


There is no systemwide default configuration file. The creation of the rulesets is not trivial and requires an understanding of the use of regular expressions that is beyond the scope of this chapter. Ubuntu does provide three examples of the files in /usr/share/doc/procmail/examples, as well as a fully commented example in the /usr/share/doc/procmail directory, which also contains a README and FAQ. Details for the rulesets can be found in the man page for Procmail as well as the man pages for procmailrc, procmailsc, and procmailex, which contain examples of Procmail recipes.

Spamassassin If you have used email for any length of time, you have likely been subjected to spam— unwanted email sent to thousands of people at the same time. Ubuntu provides an MDA named Spamassassin to assist you in reducing and eliminating unwanted emails. Easily integrated with Procmail and Sendmail, it can be configured for both systemwide and individual use. It uses a combination of rulesets and blacklists (Internet domains known to mail spam). Enabling Spamassassin is simple. You must first have installed and configured Procmail. The README file found in /usr/share/doc/spamassasin provides details on configuring the .procmail file to process mail through Spamassassin. It will tag probable spam with a unique header; you can then have Procmail filter the mail in any manner you choose. One interesting use of Spamassasin is to use it to tag email received at special email accounts established solely for the purpose of attracting spam. This information is then shared with the Spamassassin site where these “spam trap” generated hits help the authors fine-tune the rulesets.

Squirrelmail Perhaps you do not want to read your mail in an MUA. If you use your web browser often, it might make sense to read and send your mail via a web interface, such as the one used by Hotmail or Yahoo! Mail. Ubuntu provides Squirrelmail for just that purpose. Squirrelmail is written in the PHP 4 language and supports IMAP and SMTP with all pages rendering in HTML 4.0 without using Java. It supports MIME attachments, as well as an address book and folders for segregating email. You must configure your web server to work with PHP 4. Detailed installation instructions can be found in /usr/share/doc/squirrelmail/INSTALL. Once configured, point your web browser to http://www.yourdomain.com/squirellmail/ to read and send email.

Virus Scanners Although the currently held belief is that Linux is immune to email viruses targeted at Microsoft Outlook users, it certainly makes no sense for UNIX mail servers to permit infected email to be sent through them. Although Ubuntu does not provide a virus scanner, one of the more popular of many such scanners is MailScanner, available from http://www.sng.ecs.soton.ac.uk/mailscanner/; a Ubuntu DEB package is available as well as

Alternatives to Microsoft Exchange Server

485

the source code. It supports Sendmail and Exim, but not Postfix or Qmail. A hunt through synaptic using the search terms “virus” and “scanner” should yield some other options for you to try out.

Mail Daemons Biff is a small daemon that monitors your mail folder and notifies you when a message has been placed there. It is common to include biff y in the .login or .profile files to automatically start it upon user login if you want to use Biff.

NOTE Autoresponders automatically generate replies to received messages; they are commonly used to notify others that the recipient is out of the office. Mercifully, Ubuntu does not include one, but you can find and install an autoresponder at Freshmeat.net. If you are subscribed to a mailing list, be aware that automatic responses from your account can be very annoying to others on the list. Please unsubscribe from mail lists before you leave the office with your autoresponder activated.

Alternatives to Microsoft Exchange Server One of the last areas in which a Microsoft product has yet to be usurped by open-source software is a replacement for Microsoft Exchange Server. Many businesses use Microsoft Outlook and Microsoft Exchange Server to access email, as well as to provide calendaring, notes, file sharing, and other collaborative functions. General industry complaints about Exchange Server center around scalability, administration (backup and restore in particular), and licensing fees. A “drop-in” alternative needs to have compatibility with Microsoft Outlook because it’s intended to replace Exchange Server in an environment in which there are Microsoft desktops in existence using Outlook. A “work-alike” alternative provides similar features to Exchange Server, but does not offer compatibility with the Microsoft Outlook client itself; the latter is typical of many of the open-source alternatives.

Of course, independent applications for these functions abound in the open-source world, but one characteristic of “groupware” is its central administration; another is that all components can share information.

19

Several “drop-in” alternatives exist, none of which are fully open source because some type of proprietary connector is needed to provide the services to Microsoft Outlook clients (or provide Exchange services to the Linux Evolution client). For Outlook compatibility, the key seems to be the realization of a full, open implementation of MAPI, the Microsoft Messaging Application Program Interface. That goal is going to be difficult to achieve because MAPI is a poorly documented Microsoft protocol. For Linux-only solutions, the missing ingredient for many alternatives is a usable group calendaring/scheduling system similar in function to that provided by Exchange Server/Outlook.

486

CHAPTER 19


The following sections examine several of the available servers, beginning with Microsoft Exchange Server itself and moving toward those applications that have increasing incompatibility with it. None of these servers are provided with Ubuntu.

Microsoft Exchange Server/Outlook Client Exchange Server and Outlook seem to be the industry benchmark because of their widespread deployment. They offer a proprietary server providing email, contacts, scheduling, public folders, task lists, journaling, and notes using Microsoft Outlook as the client and MAPI as the API. If you consider what Microsoft Exchange offers as the “full” set of features, no other replacement offers 100% of the features exactly as provided by Microsoft Exchange Server—even those considered “drop-in” replacements. The home page for the Microsoft Exchange server is http://www.microsoft.com/exchange/.

CommuniGate Pro CommuniGate Pro is a proprietary, drop-in alternative to Microsoft Exchange Server, providing, email, webmail, LDAP directories, a web server, file server, contacts, calendaring (third party), Voice over IP, and a list server. The CommuniGate Pro MAPI Connector provides access to the server from Microsoft Outlook and other MAPI-enabled clients. The home page for this server is http://www.stalker.com/.

Oracle Collaboration Suite This is probably the closest that you will get to an Exchange replacement, allowing you to collaborate by instant messaging, email, sharing files (workspaces), calendaring, and other tools. It provides an Outlook Connector for users who have to have the familiarity of Outlook. OCS is available for Linux platforms and its homepage is http://www.oracle.com/ collabsuite/.

Bynari Bynari provides a proprietary group of servers to act as a drop-in replacement for Microsoft Exchange Server for email, calendaring, public folders, scheduling, address book, webmail, and contacts. Although it runs on Linux, it offers no Linux clients although it can be used with Evolution and Thunderbird, and the connector provides services to Microsoft Outlook only. The home page is http://www.bynari.net/.

Open-Xchange Open-Xchange has a great pedigree having been owned and developed by Novell/SUSE until being spun off by itself into its own company. Working with open standards, it provides a number of collaboration options and is firmly based on Linux. It can work with a wide variety of protocols, making it one of the best connected suites available. You can get the open source version at http://www.open-xchange.com.

Alternatives to Microsoft Exchange Server

487

phpgroupware phpgroupware is an open-source application written in PHP (and used with MySQL or postgresql plus a web server and an IMAP mail server). phpgroupware provides a webbased calendar, task list, address book, email, news headlines, and a file manager. Its modular nature enables you to plug in various components (around 50 at the last count) as you need them. The home page is http://www.phpgroupware.org/.

PHProjekt PHProjekt is open-source software written in PHP (used with MySQL, postgresql, Oracle, Informix, or MS-sql). PHProjekt provides calendaring, contact manager, time card system, project management, online chat, threaded discussion forum, trouble ticket system, email, public files, notes bookmarks, voting system, task lists, reminders, site search, and integration with the PostNuke news site application. It provides no Exchange/Outlook compatibility whatsoever. The home page is http://www.PHProjekt.com/.

Horde Horde is a PHP-based application framework. When combined with an HTTP server (Apache, Microsoft IIS, Netscape) and MySQL database, IMP/Horde offers modules that provide webmail, contact manager, calendar, CVS viewer, file manager, time tracking, email filter rules manager, notes, tasks, chat, newsgroups, forms, bug tracking, FAQ repository, and presentations. The home page is http://www.horde.org/.

Relevant Ubuntu and Linux Commands You will use the following commands to manage electronic mail in Ubuntu: . balsa—A GNOME mail user agent for X . biff—A console-based mail notification utility . evolution—A comprehensive and capable Ximian GNOME mail PIM for X . fetchmail—A console-based and daemon-mode mail retrieval command for Linux . fetchmailconf—A graphical fetchmail configuration client for X . kmail—A graphical mail user client for KDE and X . mutt—A console-based mail user agent . sendmail—A comprehensive mail transport agent for UNIX and Linux . xbiff—A mail notification X client

19

. korn—A biff applet for KDE and X

488

CHAPTER 19


Reference The following references are recommended reading for email configuration. Of course, not all references will apply to you. Select the ones that apply to the email server that you are using.

Web Resources . http://www.sendmail.org/—This is the Sendmail home page. Here you will find configuration information and FAQs regarding the Sendmail MTA. . http://www.postfix.org/—This is the Postfix home page. If you are using the Postfix MTA, you can find documentation and sample configurations at this site. . http://www.qmail.org/—This is the home page for the Qmail MTA. It contains documentation and links to other resources on Qmail. . http://www.linuxgazette.com/issue35/jao.html—IMAP on Linux: A Practical Guide. The Internet Mail Access Protocol allows a user to access his email stored on a remote server rather than a local disk. . http://www.imap.org/about/whatisIMAP.html—This page describes IMAP. . http://www.rfc-editor.org/—A repository of RFCs—Request for Comments—that define the technical “rules” of modern computer usage. . http://www.procmail.org/—The Procmail home page. . http://www.moongroup.com/docs/procmail/—The Procmail FAQ, which includes suggestions for troubleshooting problems. The page also references a page of links that, in turn, reference other link collections as well as tidbits from the Procmail mail list. . http://www.ibiblio.org/pub/Linux/docs/HOWTO/other-formats/html_single/QmailVMailMgr-Courier-imap-HOWTO.html—If you want some help configuring a mail system based on the lesser-used applications, this HOWTO will help.

Books . Sendmail (O’Reilly Publishing)—This is the de facto standard guide for everything Sendmail. It is loaded with more than 1,000 pages, which gives you an idea of how complicated Sendmail really is. . Postfix (Sams Publishing)—An excellent book from Sams Publishing that covers the Postfix MTA. . Running Qmail (Sams Publishing)—This is similar to the Postfix book from Sams Publishing except that it covers the Qmail MTA.

CHAPTER

20


IN THIS CHAPTER . What Is a Proxy Server? . Installing Squid . Configuring Clients . Access Control Lists . Specifying Client IP Addresses

You can never have enough of two things in this world: time and bandwidth. Ubuntu comes with a proxy server— Squid—that enables you to cache web traffic on your server so that websites load faster and users consume less bandwidth.

What Is a Proxy Server? A proxy server lies between client machines—the desktops in your company—and the Internet. As clients request websites, they do not connect directly to the Web and send the HTTP request. Instead, they connect to the local proxy server. The proxy then forwards their request on to the Web, retrieves the result, and hands it back to the client. At its simplest, a proxy server really is just an extra layer between client and server, so why bother? The three main reasons for deploying a proxy server are as follows: . Content control—You want to stop people whiling away their work hours reading the news or downloading MP3s. . Speed—You want to cache common sites to make the most of your bandwidth. . Security—You want to monitor what people are doing. Squid is capable of all of these and more.

. Example Configurations . Reference

490

CHAPTER 20


Installing Squid Like most Ubuntu software, Squid installation is handled through synaptic. After Squid is installed, it is automatically enabled for each boot up. You can check this by running ps aux | grep squid when the machine boots. If for some reason you see nothing there, run /etc/init.d/squid start.

Configuring Clients Before you configure your new Squid server, set up the local web browser to use it for its web access. Doing so enables you to test your rules as you are working with the configuration file. To configure Firefox, select Preferences from the Edit menu. From the dialog that appears, click the Connection Settings button (near the bottom on the General tab) and select the option Manual Proxy Configuration. Check the box beneath it, Use the Same Proxy for All Protocols; then enter 127.0.0.1 as the IP address and 3128 as the port number. See Figure 20.1 for how this should look. If you are configuring a remote client, specify the IP address of the Squid server rather than 127.0.0.1.

FIGURE 20.1 Setting up Firefox to use 127.0.0.1 routes all its web requests through Squid. For Konqueror, go to the Settings menu and select Configure Konqueror. From the left tabs, scroll down to Proxy, select Manually Specify the Proxy Settings, and then click Setup. Enter 127.0.0.1 as the proxy IP address and 3128 as the port. As with Firefox, if you are configuring a remote client, specify the IP address of the Squid server rather than 127.0.0.1.

Access Control Lists

491

Internet Explorer proxy settings are in Tools/Internet Options. From the Connections tab, click the LAN Settings button and enable the Use a Proxy Server for Your LAN option. Enter the address as the IP of your Squid machine, and then specify 3128 as the port.

Access Control Lists The main Squid configuration file is /etc/squid/squid.conf, and the default Ubuntu configuration file is full of comments to help guide you. The default configuration file allows full access to the local machine but denies the rest of your network. This is a secure place to start; we recommend you try all the rules on yourself (localhost) before rolling them out to other machines. Before you start, open two terminal windows. In the first, change to the directory /var/log/squid and run this command: sudo tail -f access.log cache.log

That reads the last few lines from both files and (thanks to the -f flag) follows them so that any changes appear in there. This allows you to watch what Squid is doing as people access it. We refer to this window as the “log window,” so keep it open. In the other window (again, with sudo), bring up the file /etc/squid/squid.conf in your favorite editor. This window is referred to as the “config editor,” and you should keep it open, too. To get started, search for the string acl all—this brings you to the access control section, which is where most of the work needs to be done. You can configure a lot elsewhere, but unless you have unusual requirements, you can leave the defaults in place.

NOTE The default port for Squid is 3128, but you can change that by editing the http_port line. Alternatively, you can have Squid listen on multiple ports by having multiple http_port lines: 80, 8000, and 8080 are all popular ports for proxy servers.

Just below the first block of http_access lines is a comment like # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS. This is just what we are going to do. First, though, scroll just a few lines further; you should see these two lines: http_access allow localhost http_access deny all

20

The acl lines make up your access control lists (ACLs). The first 16 or so define the minimum recommended configuration that set up ports to listen to, and so on. You can safely ignore these. If you scroll down further (past another short block of comments), you come to the http_access lines, which are combined with the acl lines to dictate who can do what. You can (and should) mix and match acl and http_access lines to keep your configuration file easy to read.

492

CHAPTER 20


They are self-explanatory: The first says, “Allow HTTP access to the local computer, but deny everyone else.” This is the default rule, as mentioned earlier. Leave that in place for now, and run service squid start to start the server with the default settings. If you have not yet configured the local web browser to use your Squid server, do so now so that you can test the default rules. In your web browser (Firefox is assumed from here on, but it makes little difference), go to the URL http://www.ubuntulinux.org. You should see it appear as normal in the browser, but in the log window you should see a lot of messages scroll by as Squid downloads the site for you and stores it in its cache. This is all allowed because the default configuration allows access to the localhost. Go back to the config editor window and add this before the last two http_access lines: http_access deny localhost

So, the last three lines should look like this: http_access deny localhost http_access allow localhost http_access deny all

Save the file and quit your editor. Then, run this command: kill -SIGHUP ‘cat /var/run/squid.pid’

That looks for the process ID (PID) of the Squid daemon and then sends the SIGHUP signal to it, which forces it to reread its configuration file while running. You should see a string of messages in the log window as Squid rereads its configuration files. If you now go back to Firefox and enter a new URL, you should see the Squid error page informing you that you do not have access to the requested site. The reason you are now blocked from the proxy is because Squid reads its ACL lines in sequence, from top to bottom. If it finds a line that conclusively allows or denies a request, it stops reading and takes the appropriate action. So, in the previous lines, localhost is being denied in the first line and then allowed in the second. When Squid sees localhost asking for a site, it reads the deny line first and immediately sends the error page—it does not even get to the allow line. Having a deny all line at the bottom is highly recommended so that only those you explicitly allow are able to use the proxy. Go back to editing the configuration file and remove the deny localhost and allow localhost lines. This leaves only deny all, which blocks everyone (including the localhost) from accessing the proxy. Now we are going to add some conditional allow statements: We want to allow localhost only if it fits certain criteria. Defining access criteria is done with the acl lines, so above the deny all line, add this: acl newssites dstdomain news.bbc.co.uk slashdot.org http_access allow newssites

Access Control Lists

493

The first line defines an access category called newssites, which contains a list of domains (dstdomain). The domains are news.bbc.co.uk and slashdot.org, so the full line reads, “Create a new access category called newssites, that should filter on domain, and contain the two domains listed.” It does not say whether access should be granted or denied to that category; that comes in the next line. The line http_access allow newssites means, “Allow access to the category newssites with no further restrictions.” It is not limited to localhost, which means that applies to every computer connecting to the proxy server. Save the configuration file and rerun the kill -SIGHUP line from before to restart Squid; then go back to Firefox and try loading http://www.ubuntulinux.org. You should see the same error as before because that was not in our newssites category. Now try http://news. bbc.co.uk, and it should work. However, if you try http://www.slashdot.org, it will not work, and you might also have noticed that the images did not appear on the BBC News website either. The problem here is that specifying slashdot.org as the website is specific: It means that http://slashdot.org will work, whereas http://www.slashdot.org will not. The BBC News site stores its images on the site http://newsimg.bbc.co.uk, which is why they do not appear. Go back to the configuration file, and edit the newssites ACL to this: acl newssites dstdomain .bbc.co.uk .slashdot.org

Putting the period in front of the domains (and in the BBC’s case, taking the news off, too) means that Squid will allow any subdomain of the site to work, which is usually what you will want. If you want even more vagueness, you can just specify .com to match *.com addresses. Moving on, you can also use time conditions for sites. For example, if you want to allow access to the news sites in the evenings, you can set up a time category using this line: acl freetime time MTWHFAS 18:00-23:59

This time, the category is called freetime and the condition is time, which means we need to specify what time the category should contain. The seven characters following that are the days of the week: Monday, Tuesday, Wednesday, tHursday, Friday, sAturday, and Sunday. Thursday and Saturday use capital H and A so they do not clash with Tuesday and Sunday. With that category defined, you can change the http_access line to include it, like this: http_access allow newssites freetime

20

For Squid to allow access now, it must match both conditions—the request must be for either *.bbc.co.uk or slashdot.org, and during the time specified. If either condition does not match, the line is not matched and Squid continues looking for other matching rules beneath it. The times you specify here are inclusive on both sides, which means users in the freetime category will be able to surf from 18:00:00 until 23:59:59.

494

CHAPTER 20


You can add as many rules as you like, although you should be careful to try to order them so that they make sense. Keep in mind that all conditions in a line must be matched for the line to be matched. Here is a more complex example: . You want a category newssites that contains serious websites people need for their work. . You want a category playsites that contains websites people do not need for their work. . You want a category worktime that stretches from 09:00 to 18:00. . You want a category freetime that stretches from 18:00 to 20:00, when the office closes. . You want people to be able to access the news sites, but not the play sites, during working hours. . You want people to be able to access both the news sites and the play sites during the free time hours. To do that, you need the following rules: acl newssites dstdomain .bbc.co.uk .slashdot.org acl playsites dstdomain .tomshardware.com ubuntulinux.org acl worktime time MTWHF 9:00-18:00 acl freetime time MTWHF 18:00-20:00 http_access allow newssites worktime http_access allow newssites freetime http_access allow playsites freetime

NOTE The letter D is equivalent to MTWHF in meaning “all the days of the working week.”

Notice that there are two http_access lines for the newssites category: one for worktime and one for freetime. This is because all the conditions must be matched for a line to be matched. Alternatively, you can write this: http_access allow newssites worktime freetime

However, if you do that and someone visits news.bbc.co.uk at 2:30 p.m. (14:30) on a Tuesday, Squid will work like this: . Is the site in the newssites category? Yes, continue. . Is the time within the worktime category? Yes, continue. . Is the time within the freetime category? No; do not match rule, and continue searching for rules. It is because of this that two lines are needed for the worktime category.

Specifying Client IP Addresses

495

One particularly powerful way to filter requests is with the url_regex ACL line. This allows you to specify a regular expression that is checked against each request: If the expression matches the request, the condition matches. For example, if you want to stop people downloading Windows executable files, you would use this line: acl noexes url_regex -i exe$

The dollar sign means “end of URL,” which means it would match http://www.somesite. com/virus.exe but not http://www.executable.com/innocent.html. The -i part means “not case-sensitive,” so the rule will match .exe, .Exe, .EXE, and so on. You can use the caret sign (^) for “start of URL.” For example, you could stop some pornography sites using this ACL: acl noporn url_regex -i sex

Do not forget to run the kill -SIGHUP command each time you make changes to Squid; otherwise, it will not reread your changes. You can have Squid check your configuration files for errors by running squid -k parse as root. If you see no errors, it means your configuration is fine.

NOTE It is critical that you run the command kill -SIGHUP and provide it the PID of your Squid daemon each time you change the configuration; without this, Squid will not reread its configuration files.

Specifying Client IP Addresses The configuration options so far have been basic, and you can use many more to enhance the proxying system you want. After you are past deciding which rules work for you locally, it is time to spread them out to other machines. You do so by specifying IP ranges that should be allowed or disallowed access, and you enter these into Squid using more ACL lines.

192.0.0.0/8 192.168.0.0/16 192.168.0.0/24

Each line has an IP address, followed by a slash and then a number. That last number defines the range of addresses you want covered and refers to the number of bits in an IP

20

If you want to, you can specify all the IP addresses on your network, one per line. However, for networks of more than about 20 people or using Dynamic Host Control Protocol (DHCP), that is more work than necessary. A better solution is to use classless interdomain routing (CIDR) notation, which allows you to specify addresses like this:

496

CHAPTER 20


address. An IP address is a 32-bit number, but we are used to seeing it in dotted-quad notation: A.B.C.D. Each of those quads can be between 0 and 255 (although in practice some of these are reserved for special purposes), and each is stored as an 8-bit number. The first line in the previous code covers IP addresses starting from 192.0.0.0; the /8 part means that the first 8 bits (the first quad, 192) is fixed and the rest is flexible. So, Squid treats that as addresses 192.0.0.0, 192.0.0.1, through to 192.0.0.255, then 192.0.1.0, 192.0.1.1, all the way through to 192.255.255.255. The second line uses /16, which means Squid will allow IP addresses from 192.168.0.0 to 192.168.255.255. The last line has /24, which allows from 192.168.0.0 to 192.168.0.255. These addresses are placed into Squid using the src ACL line, as follows: acl internal_network src 10.0.0.0/24

That line creates a category of addresses from 10.0.0.0 to 10.0.0.255. You can combine multiple address groups together, like this: acl internal_network src 10.0.0.0/24 10.0.3.0/24 10.0.5.0/24 192.168.0.1

That example allows 10.0.0.0 through 10.0.0.255, then 10.0.3.0 through 10.0.3.255, and finally the single address 192.168.0.1. Keep in mind that if you are using the local machine and you have the web browser configured to use the proxy at 127.0.0.1, the client IP address will be 127.0.0.1, too. So, make sure you have rules in place for localhost. As with other ACL lines, you need to enable them with appropriate http_access allow and http_access deny lines.

Example Configurations To help you fully understand how Squid access control works, and to give you a head start developing your own rules, the following are some ACL lines you can try. Each line is preceded with one or more comment lines (starting with a #) explaining what it does: # include the domains news.bbc.co.uk and slashdot.org # and not newsimg.bbc.co.uk or www.slashdot.org. acl newssites dstdomain news.bbc.co.uk slashdot.org # include any subdomains or bbc.co.uk or slashdot.org acl newssites dstdomain .bbc.co.uk .slashdot.org # only include sites located in Canada acl canadasites dstdomain .ca # only include working hours

Example Configurations

497

acl workhours time MTWHF 9:00-18:00 # only include lunchtimes acl lunchtimes time MTWHF 13:00-14:00 # only include weekends acl weekends time AS 00:00-23:59 # include URLs ending in “.zip”. Note: the \ is important, # because “.” has a special meaning otherwise acl zipfiles url_regex -i \.zip$ # include URLs starting with https acl httpsurls url_regex -i ^https # include all URLs that match “hotmail” url_regex hotmail url_regex -i hotmail # include three specific IP addresses acl directors src 10.0.0.14 10.0.0.28 10.0.0.31 # include all IPs from 192.168.0.0 to 192.168.0.255 acl internal src 192.168.0.0/24 # include all IPs from 192.168.0.0 to 192.168.0.255 # and all IPs from 10.0.0.0 to 10.255.255.255 acl internal src 192.168.0.0/24 10.0.0.0/8

When you have your ACL lines in place, you can put together appropriate http_access lines. For example, you might want to use a multilayered access system so that certain users (for example, company directors) have full access, whereas others are filtered. For example: http_access http_access http_access http_access

allow directors deny hotmail deny zipfiles allow internal lunchtimes

http_access deny all

20

Because Squid matches those in order, directors will have full, unfiltered access to the Web. If the client IP address is not in the directors list, the two deny lines are processed so that the user cannot download .zip files or read online mail at Hotmail. After blocking those two types of requests, the allow on line four allows internal users to access the Web, as long as they do so only at lunchtime. The last line (which is highly recommended) blocks all other users from the proxy.

498

CHAPTER 20


Reference . http://www.squid-cache.org/—The home page of the Squid Web Proxy Cache. . http://squid-docs.sourceforge.net/latest/book-full.html—The home page of Squid: A User’s Guide, a free online book about Squid. . http://www.faqs.org/docs/securing/netproxy-squid.html—A brief online guide to configuring a local Squid server. . http://squid.visolve.com/squid/index.htm/—The home page of a company that can provide commercial support and deployment of Squid. . http://squid.visolve.com/squid/reverseproxy.htm—ViSolve’s guide to setting up Squid to reverse proxy to cache a local web server for external visitors. . As well as these URLs, there are two excellent books on the topic of web caching. The first is Squid: The Definitive Guide (O’Reilly) by Duane Wessels, ISBN: 0-596-00162-2. The second is Web Caching (O’Reilly) also by Duane Wessels, ISBN: 1-56592-536-X. Of the two, the former is more practical and covers the Squid server in depth. The latter is more theoretical, discussing how caching is implemented. Wessels is one of the leading developers on Squid, so both books are of impeccable technical accuracy.

CHAPTER

21


IN THIS CHAPTER . A Brief Review of Database Basics . Choosing a Database: MySQL Versus PostgreSQL . Configuring MySQL . Configuring PostgreSQL

This chapter is an introduction to MySQL and PostgreSQL, two database systems that are included with Ubuntu. You will learn what these systems do, how the two programs compare, and how to consider their advantages and disadvantages. This information can help you choose and deploy which one to use for your organization’s database needs. The database administrator (DBA) for an organization has several responsibilities, which vary according to the size and operations of the organization, supporting staff, and so on. Depending on the particular organization’s structure, if you are the organization’s DBA, your responsibilities might include the following: . Installing and maintaining database servers—You might install and maintain the database software. Maintenance can involve installing patches as well as upgrading the software at the appropriate times. As DBA, you might need to have root access to your system and know how to manage software (see Chapter 7, “Managing Software”). You also need to be aware of kernel, file system, and other security issues. . Installing and maintaining database clients—The database client is the program used to access the database (you’ll learn more on that later in this chapter, in the section “Database Clients”), either locally or remotely over a network. Your responsibilities might include installing and maintaining these client programs on users’ systems. This chapter discusses how to install and work with the clients from both the Linux command line and through its graphical interface database tools.

. Database Clients . Reference

500

CHAPTER 21


. Managing accounts and users—Account and user management include adding and deleting users from the database, assigning and administering passwords, and so on. In this chapter, you will learn how to grant and revoke user privileges and passwords for MySQL and PostgreSQL while using Ubuntu. . Ensuring database security—To ensure database security, you need to be concerned with things such as access control, which ensures that only authorized people can access the database, and permissions, which ensure that people who can access the database cannot do things they should not do. In this chapter, you will learn how to manage Secure Shell (SSH), web, and local GUI client access to the database. Planning and overseeing the regular backup of an organization’s database and restoring data from those backups is another critical component of securing the database. . Ensuring data integrity—Of all the information stored on a server’s hard disk storage, chances are the information in the database is the most critical. Ensuring data integrity involves planning for multiple-user access and ensuring that changes are not lost or duplicated when more than one user is making changes to the database at the same time.

A Brief Review of Database Basics Database services under Linux that use the software discussed in this chapter are based on a client/server model. Database clients are often used to input data and to query or display query results from the server. You can use the command line or a graphical client to access a running server. Databases generally come in two forms: flat file and relational. A flat file database can be as simple as a text file with a space, tab, or some other character delimiting different parts of the information. One example of a simple flat file database is the Ubuntu /etc/passwd file. Another example could be a simple address book that might look something like this: Doe~John~505 Some Street~Anytown~NY~12345~555-555-1212

You can use standard UNIX tools such as grep, awk, and perl to search for and extract information from this primitive database. Although this might work well for a small database such as an address book that only one person uses, flat file databases of this type have several limitations: . They do not scale well—Flat file databases cannot perform random access on data. They can only perform sequential access. This means they have to scan each line in the file, one by one, to look for specific information. As the size of the database grows, access times increase and performance decreases. . Flat file databases are unsuitable for multi-user environments—Depending on how the database is set up, it either enables only one user to access it at a time or allows two users to make changes simultaneously, and the changes could end up overwriting each other and cause data loss.

A Brief Review of Database Basics

501

Oracle, DB2, Microsoft SQL Server, and the freely available PostgreSQL and MySQL are all examples of RDBMSs. The following sections discuss how relational databases work and provide a closer look at some of the basic processes involved in administering and using databases. You will also learn about SQL, the standard language used to store, retrieve, and manipulate database data.

How Relational Databases Work An RDBMS stores data in tables, which you can visualize as spreadsheets. Each column in the table is a field; for example, a column might contain a name or an address. Each row in the table is an individual record. The table itself has a name you use to refer to that table when you want to get data out of it or put data into it. Figure 21.1 shows an example of a simple relational database that stores name and address information.

address

city

state

zip

phone

Doe

John

501 Somestreet

Anytown

NY

55011

555-555-1212

last_name first_name Doe

Jane

501 Somestreet

Anytown

NY

55011

555-555-1212

Palmer

John

205 Anystreet

Sometown

NY

55055

123-456-7890

Johnson

Robert

100 Easystreet

Easytown

CT

12345

111-222-3333

FIGURE 21.1 In this visualization of how an RDBMS stores data, the database stores four records (rows) that include name and address information, divided into seven fields (columns) of data. In the example shown in Figure 21.1, the database contains only a single table. Most RDBMS setups are much more complex than this, with a single database containing multiple tables. Figure 21.2 shows an example of a database named sample_database that contains two tables. In the sample_database example, the phonebook table contains four records (rows) and each record hold three fields (columns) of data. The cd_collection table holds eight records, divided into five fields of data. If you are thinking that there is no logical relationship between the phonebook table and the cd_collection table in the sample_database example, you are correct. In a relational database, users can store multiple tables of data in a single database—even if the data in one table is unrelated to the data in others. For example, suppose you run a small company that sells widgets and you have a computerized database of customers. In addition to storing each customer’s name, address, and

21

These limitations obviously make the flat file database unsuitable for any kind of serious work in even a small business—much less in an enterprise environment. Relational databases, or relational database management systems (RDBMSs) to give them their full name, are good at finding the relationships between individual pieces of data. An RDBMS stores data in tables with fields much like those in spreadsheets, making the data searchable and sortable. RDBMSs are the focus of this chapter.

502

CHAPTER 21


FIGURE 21.2 A single database can contain two tables—in this case, phonebook and cd_collection.

phone number, you want to be able to look up outstanding order and invoice information for any of your customers. You could use three related tables in an RDBMS to store and organize customer data for just those purposes. Figure 21.3 shows an example of such a database.

FIGURE 21.3 You can use three related tables to track customers, orders, and outstanding invoices.


503

Now that you have an idea of how data is stored in an RDBMS and how the RDBMS structure enables you to work with that data, you are ready to learn how to input and output data from the database. This is where SQL comes in.

Understanding SQL Basics SQL (pronounced “S-Q-L”) is a database query language understood by virtually all RDBMSs available today. You use SQL statements to get data into and retrieve data from a database. As with statements in any language, SQL statements have a defined structure that determines their meanings and functions. As a DBA, you should understand the basics of SQL, even if you will not be doing any of the actual programming yourself. Fortunately, SQL is similar to standard English, so learning the basics is simple.

Creating Tables As mentioned previously, an RDBMS stores data in tables that look similar to spreadsheets. Of course, before you can store any data in a database, you need to create the necessary tables and columns to store the data. You do this by using the CREATE statement. For example, the cd_collection table from Figure 21.2 has 5 columns, or fields: id, title, artist, year, and rating. SQL provides several column types for data that define what kind of data will be stored in the column. Some of the available types are INT, FLOAT, CHAR, and VARCHAR. Both CHAR and VARCHAR hold text strings, with the difference being that CHAR holds a fixed-length string, whereas VARCHAR holds a variable-length string. There are also special column types, such as DATE, that only take data in a date format, and ENUMs (enumerations), which can be used to specify that only certain values are allowed. If, for example, you wanted to record the genre of your CDs, you could use an ENUM column that accepts only the values POP, ROCK, EASY_LISTENING, and so on. You will learn more about ENUM later in this chapter. Looking at the cd_collection table, you can see that three of the columns hold numerical data and the other two hold string data. In addition, the character strings are of variable length. Based on this information, you can discern that the best type to use for the text columns is type VARCHAR, and the best type to use for the others is INT. You should notice something else about the cd_collection table: One of the CDs is missing a rating,

21

In the example in Figure 21.3, we have added a customer ID field to each customer record. This field holds a customer ID number that is the unique piece of information that can be used to link all other information for each customer to track orders and invoices. Each customer is given an ID unique to him; two customers might have the same data in their name fields, but their ID field values will never be the same. The Customer ID field data in the Orders and Overdue tables replaces the Last Name, First Name, and Shipping Address field information from the Customers table. Now, when you want to run a search for any customer’s order and invoice data, you can search based on one key rather than multiple keys. You get more accurate results in faster, easier-to-conduct data searches.

504

CHAPTER 21


perhaps because we have not listened to it yet. This value, therefore, is optional; it starts empty and can be filled in later. You are now ready to create a table. As mentioned before, you do this by using the CREATE statement, which uses the following syntax: CREATE TABLE table_name (column_name column_type(parameters) options, ...);

You should know the following about the CREATE statement: . SQL commands are not case sensitive—For example, CREATE TABLE, create table, and Create Table are all valid. . Whitespace is generally ignored—This means you should use it to make your SQL commands clearer. The following example shows how to create the table for the cd_collection database: CREATE TABLE cd_collection ( id INT NOT NULL, title VARCHAR(50) NOT NULL, artist VARCHAR(50) NOT NULL, year VARCHAR(50) NOT NULL, rating VARCHAR(50) NULL );

Notice that the statement terminates with a semicolon. This is how SQL knows you are finished with all the entries in the statement. In some cases, the semicolon can be omitted, and we will point out these cases when they arise.

TIP SQL has a number of reserved keywords that cannot be used in table names or field names. For example, if you keep track of CDs you want to take with you on vacation, you would not be able to use the field name select because that is a reserved keyword. Instead, you should either choose a different name (selected?) or just prefix the field name with an f, such as fselect.

Inserting Data into Tables After you create the tables, you can put data into them. You can insert data manually with the INSERT statement, which uses the following syntax: INSERT INTO table_name VALUES(‘value1’, ‘value2’, ‘value3’, ...);

This statement inserts value1, value2, and so on into the table table_name. The values that are inserted constitute one row, or record, in the database. Unless specified otherwise, values are inserted in the order in which the columns are listed in the database table. If, for some reason, you want to insert values in a different order (or if you want to insert


505

only a few values and they are not in sequential order), you can specify which columns you want the data to go in by using the following syntax:

You can also fill multiple rows with a single INSERT statement, using syntax such as the following: INSERT INTO table_name VALUES(‘value1’, ‘value2’),(‘value3’, ‘value4’);

In this statement, value1 and value2 are inserted into the first row and value3 and value4 are inserted into the second row. The following example shows how you would insert the Nevermind entry into the cd_collection table: INSERT INTO cd_collection VALUES(9, ‘Nevermind’, ‘’Nirvana’, ‘1991, ‘’NULL);

MySQL requires the NULL value for the last column (rating) if you do not want to include a rating. PostgreSQL, on the other hand, lets you get away with just omitting the last column. Of course, if you had columns in the middle that were null, you would need to explicitly state NULL in the INSERT statement. Normally, INSERT statements are coded into a front-end program so users adding data to the database do not have to worry about the SQL statements involved.

Retrieving Data from a Database Of course, the main reason for storing data in a database is so you can later look up, sort, and generate reports on that data. Basic data retrieval is done with the SELECT statement, which has the following syntax: SELECT column1, column2, column3 FROM table_name WHERE search_criteria;

The first two parts of the statement—the SELECT and FROM parts—are required. The WHERE portion of the statement is optional. If it is omitted, all rows in the table table_name are returned. The column1, column2, column3 indicates the name of the columns you want to see. If you want to see all columns, you can also use the wildcard * to show all the columns that match the search criteria. For example, the following statement displays all columns from the cd_collection table: SELECT * FROM cd_collection;

If you wanted to see only the titles of all the CDs in the table, you would use a statement such as the following: SELECT title FROM cd_collection;

21

INSERT INTO table_name (column1,column4) VALUES(‘value1’, ‘value2’);

506

CHAPTER 21


To select the title and year of a CD, you would use the following: SELECT title, year FROM cd_collection;

If you wanted something a little fancier, you can use SQL to print the CD title followed by the year in parentheses, as is the convention. Both MySQL and PostgreSQL provide string concatenation functions to handle problems such as this. However, the syntax is different in the two systems. In MySQL, you can use the CONCAT() function to combine the title and year columns into one output column, along with parentheses. The following statement is an example: SELECT CONCAT(title,” (“,year, “)”) AS TitleYear FROM cd_collection;

That statement lists both the title and year under one column that has the label TitleYear. Note that there are two strings in the CONCAT() function along with the fields—these add whitespace and the parentheses. In PostgreSQL, the string concatenation function is simply a double pipe (||). The following command is the PostgreSQL equivalent of the preceding MySQL command: SELECT (genus||’’ (‘||species||’)’) AS TitleYear FROM cd_collection;

Note that the parentheses are optional, but they make the statement easier to read. Once again, the strings in the middle and at the end (note the space between the quotes) are used to insert spacing and parentheses between the title and year. Of course, more often than not, you do not want a list of every single row in the database. Rather, you only want to find rows that match certain characteristics. For this, you add the WHERE statement to the SELECT statement. For example, suppose you want to find all the CDs in the cd_collection table that have a rating of 5. You would use a statement like the following: SELECT * FROM cd_collection WHERE rating = 5;

Using the table from Figure 21.2, you can see that this query would return the rows for Trouser Jazz, Life for Rent, and The Two Towers. This is a simple query, and SQL is capable of handling queries much more complex than this. Complex queries can be written using logical AND and logical OR statements. For example, suppose you want to refine the query so it lists only those CDs that were not released in 2003. You would use a query like the following: SELECT * FROM cd_collection WHERE rating = 5 AND year != 2003;

In SQL, != means “is not equal to.” So once again looking at the table from Figure 21.2, you can see that this query returns the rows for Trouser Jazz and The Two Towers but does not return the row for Life for Rent because it was released in 2003.

Choosing a Database: MySQL Versus PostgreSQL

507

So, what if you want to list all the CDs that have a rating of 3 or 4 except those released in the year 2000? This time, you combine logical AND and logical OR statements:

This query would return entries for Mind Bomb, Natural Elements, and Combat Rock. However, it wouldn’t return entries for Adiemus 4 because it was released in 2000.

TIP One of the most common errors among new database programmers is confusing logical AND and logical OR. For example, in everyday speech, you might say “Find me all CDs released in 2003 and 2004.” At first glance, you might think that if you fed this statement to the database in SQL format, it would return the rows for For All You’ve Done and Life for Rent. In fact, it would return no rows at all. This is because the database interprets the statement as “Find all rows in which the CD was released in 2003 and was released in 2004.” It is, of course, impossible for the same CD to be released twice, so this statement would never return any rows, no matter how many CDs were stored in the table. The correct way to form this statement is with an OR statement instead of an AND statement.

SQL is capable of far more than is demonstrated here. But as mentioned before, this section is not intended to teach you all there is to know about SQL programming; rather, it teaches you the basics so you can be a more effective DBA.

Choosing a Database: MySQL Versus PostgreSQL If you are just starting out and learning about using a database with Linux, the first logical step is to research which database will best serve your needs. Many database software packages are available for Linux; some are free, and others cost hundreds of thousands of dollars. Expensive commercial databases, such as Oracle, are beyond the scope of this book. Instead, this chapter focuses on two freely available databases: MySQL and PostgreSQL. Both of these databases are quite capable, and either one could probably serve your needs. However, each database has a unique set of features and capabilities that might serve your needs better or make developing database applications easier for you.

Speed Until recently, the speed choice was simple: If the speed of performing queries was paramount to your application, you used MySQL. MySQL has a reputation for being an extremely fast database. Until recently, PostgreSQL was quite slow by comparison.

21

SELECT * FROM cd_collection WHERE rating = 3 OR rating = 4 AND year != 2000;

508

CHAPTER 21


Newer versions of PostgreSQL have improved in terms of speed (when it comes to disk access, sorting, and so on). In certain situations, such as periods of heavy simultaneous access, PostgreSQL can be significantly faster than MySQL, as you will see in the next section. However, MySQL is still extremely fast when compared to many other databases.

Data Locking To prevent data corruption, a database needs to put a lock on data while it is being accessed. As long as the lock is on, no other process can access the data until the first process has released the lock. This means that any other processes trying to access the data have to wait until the current process completes. The next process in line then locks the data until it is finished, and the remaining processes have to wait their turn, and so on. Of course, operations on a database generally complete quickly, so in environments with a small number of users simultaneously accessing the database, the locks are usually of such short duration that they do not cause any significant delays. However, in environments in which many people are accessing the database simultaneously, locking can create performance problems as people wait their turn to access the database. Older versions of MySQL lock data at the table level, which can be considered a bottleneck for updates during periods of heavy access. This means that when someone writes a row of data in the table, the entire table is locked so no one else can enter data. If your table has 500,000 rows (or records) in it, all 500,000 rows are locked any time 1 row is accessed. Once again, in environments with a relatively small number of simultaneous users, this doesn’t cause serious performance problems because most operations complete so quickly that the lock time is extremely short. However, in environments in which many people are accessing the data simultaneously, MySQL’s table-level locking can be a significant performance bottleneck. PostgreSQL, on the other hand, locks data at the row level. In PostgreSQL, only the row currently being accessed is locked. The rest of the table can be accessed by other users. This row-level locking significantly reduces the performance impact of locking in environments that have a large number of simultaneous users. Therefore, as a general rule, PostgreSQL is better suited for high-load environments than MySQL. The MySQL release bundled with Ubuntu gives you the choice of using tables with tablelevel or row-level locking. In MySQL terminology, MyISAM tables use table-level locking and InnoDB tables use row-level locking.

NOTE MySQL’s data locking methods are discussed in more depth at http://www.mysql.com/ doc/en/Internal_locking.html. You can find more information on PostgreSQL’s locking at http://www.postgresql.org/idocs/index.php?locking-tables.html.

Choosing a Database: MySQL Versus PostgreSQL

509

ACID Compliance in Transaction Processing to Protect Data Integrity

. Atomicity—This means that several database operations are treated as an indivisible (atomic) unit, often called a transaction. In a transaction, either all unit operations are carried out or none of them are. In other words, if any operation in the atomic unit fails, the entire atomic unit is canceled. . Consistency—Ensures that no transaction can cause the database to be left in an inconsistent state. Inconsistent states can be caused by database client crashes, network failures, and similar situations. Consistency ensures that, in such a situation, any transaction or partially completed transaction that would cause the database to be left in an inconsistent state is rolled back, or undone. . Isolation—Ensures that multiple transactions operating on the same data are completely isolated from each other. This prevents data corruption if two users try to write to the same record at the same time. The way isolation is handled can generally be configured by the database programmer. One way that isolation can be handled is through locking, as discussed previously. . Durability—Ensures that, after a transaction has been committed to the database, it cannot be lost in the event of a system crash, network failure, or other problem. This is usually accomplished through transaction logs. Durability means, for example, that if the server crashes, the database can examine the logs when it comes back up and it can commit any transactions that were not yet complete into the database. PostgreSQL is ACID-compliant, but again MySQL gives you the choice of using ACIDcompliant tables or not. MyISAM tables are not ACID-compliant, whereas InnoDB tables are. Note that ACID compliancy is no easy task: All the extra precautions incur a performance overhead.

SQL Subqueries Subqueries allow you to combine several operations into one atomic unit, and they enable those operations to access each other’s data. By using SQL subqueries, you can perform some extremely complex operations on a database. In addition, using SQL subqueries eliminates the potential problem of data changing between two operations as a result of another user performing some operation on the same set of data. Both PostgreSQL and MySQL have support for subqueries in this release of Ubuntu, but this was not true in earlier releases.

21

Another way MySQL and PostgreSQL differ is in the amount of protection they provide for keeping data from becoming corrupted. The acronym ACID is commonly used to describe several aspects of data protection:

510

CHAPTER 21


Procedural Languages and Triggers A procedural language is an external programming language that can be used to write functions and procedures. This allows you to do things that aren’t supported by simple SQL. A trigger allows you to define an event that will invoke the external function or procedure you have written. For example, a trigger can be used to cause an exception if an INSERT statement containing an unexpected or out-of-range value for a column is given. For example, in the CD tracking database, you could use a trigger to cause an exception if a user entered data that did not make sense. PostgreSQL has a procedural language called PL/pgSQL. Although MySQL has support for a limited number of built-in procedures and triggers, it does not have any procedural language. This means you cannot create custom procedures or triggers in MySQL, although the same effects can often be achieved through creative client-side programming.

Configuring MySQL A free and stable version of MySQL is included with Ubuntu. MySQL is also available from the website http://www.mysql.com. The software is available in source code, binary, and APT format for Linux. You can use the Synaptic client to add the software to your system. See Chapter 7 for the details on adding (or removing) software. After you have MySQL installed, you need to initialize the grant tables or permissions to access any or all databases and tables and column data within a database. You can do this by issuing mysql_install_db as root. This command initializes the grant tables and creates a MySQL root user.

CAUTION The MySQL data directory needs to be owned by the user as which MySQL will run (changing ownership using the chown command). In addition, only this user should have any permissions on this directory. (In other words, the permissions should be set to 700 by using chmod.) Setting up the data directory any other way creates a security hole.

Running mysql_install_db should generate output similar to the following: sudo mysql_install_db Preparing db table Preparing host table Preparing user table Preparing func table Preparing tables_priv table Preparing columns_priv table Installing all prepared tables 020916 17:39:05 /usr/libexec/mysqld: Shutdown Complete

Configuring MySQL

511

...

CAUTION By default, the MySQL root user is created with no password. This is one of the first things you must change because the MySQL root user has access to all aspects of the database. The following section explains how to change the password of the user.

Setting a Password for the MySQL Root User To set a password for the root MySQL user, you need to connect to the MySQL server as the root MySQL user; you can use the command mysql -u root to do so. This command connects you to the server with the MySQL client. When you have the MySQL command prompt, issue a command like the following to set a password for the root user: mysql> SET PASSWORD FOR root = PASSWORD(“secretword”); secretword should be replaced by whatever you want to be the password for the root user. You can use this same command with other usernames to set or change passwords for other database users.

After you enter a password, you can exit the MySQL client by typing exit at the command prompt.

Creating a Database in MySQL In MySQL you create a database by using the CREATE DATABASE statement. To create a database, you connect to the server by typing mysql -u root -p and pressing Enter. After you do so, you are connected to the database as the MySQL root user and prompted for a password. After you enter the password, you are placed at the MySQL command prompt. Then you use the CREATE DATABASE command. For example, the following commands create a database called animals: sudo mysql -u root -p Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 1 to server version: 3.23.58 Type ‘help;’ or ‘\h’ for help. Type ‘\c’ to clear the buffer. mysql> CREATE DATABASE animals; Query OK, 1 row affected (0.00 sec) mysql>

21

The command prepares MySQL for use on the system and reports helpful information. The next step is to set the password for the MySQL root user, which is discussed in the following section.

512

CHAPTER 21


Another way to create a database is to use the mysqladmin command, as the root user, with the create keyword and the name of a new database. For example, to create a new database named reptiles, you use a command line like this: # mysqladmin -u root -p create reptiles

Granting and Revoking Privileges in MySQL You probably want to grant yourself some privileges, and eventually you will probably want to grant privileges to other users. Privileges, also known as rights, are granted and revoked on four levels: . Global-level—These rights allow access to any database on a server. . Database-level—These rights allow access to all tables in a database. . Table-level—These rights allow access to all columns within a table in a database. . Column-level—These rights allow access to a single column within a database’s table.

NOTE Listing all the available privileges is beyond the scope of this chapter. See the MySQL documentation for more information.

To add a user account, you connect to the database by typing mysql -u root -p and pressing Enter. You are then connected as the root user and prompted for a password. (You did set a password for the root user, as instructed in the last section, right?) After you enter the root password, you are placed at the MySQL command prompt. To grant privileges to a user, you use the GRANT statement, which has the following syntax: grant what_to_grant ON where_to_grant TO user_name IDENTIFIED BY ‘password’;

The first option, what_to_grant, is the privileges you are granting to the user. These privileges are specified with keywords. For example, the ALL keyword is used to grant global-, database-, table-, and column-level rights for a specified user. The second option, where_to_grant, specifies the resources on which the privileges should be granted. The third option, user_name, is the username to which you want to grant the privileges. Finally, the fourth option, password, is a password that should be assigned to this user. If this is an existing user who already has a password and you are modifying permissions, you can omit the IDENTIFIED BY portion of the statement. For example, to grant all privileges on a database named sampledata to a user named foobar, you could use the following command: GRANT ALL ON animals.* TO foobar IDENTIFIED BY ‘secretword’;

Configuring PostgreSQL

513

$ mysql -h shuttle2 -u foobar -p animals Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 43 to server version: 3.23.58 Type ‘help;’ or ‘\h’ for help. Type ‘\c’ to clear the buffer. mysql>

NOTE See the section “The MySQL Command-Line Client” for additional command-line options.

Later, if you need to revoke privileges from foobar, you can use the REVOKE statement. For example, the following statement revokes all privileges from the user foobar: REVOKE ALL ON animals FROM foobar;

Advanced database administration, privileges, and security are very complex topics that are beyond the scope of this book. See the section “Reference” at the end of this chapter for links to online documentation. You can also check out Luke Welling’s and Laura Thompson’s book PHP and MySQL Development from Sams Publishing.

Configuring PostgreSQL If you do not want to use the version of PostgreSQL bundled with Ubuntu, the latest PostgreSQL binary files and source are available at http://www.postgresql.org. The PostgreSQL packages are distributed as several files. At a minimum, you probably want the postgresql, postgresql-server, and postgresql-libs packages. You should see the README file in the FTP directory ftp://ftp.postgresql.org/pub/ to determine whether you need any other packages. If you are installing from the Ubuntu package files, a necessary postgres user account (that is, an account with the name of the user running the server on your system) is created for you automatically: $ fgrep postgres /etc/passwd postgres:x:26:26:PostgreSQL Server:/var/lib/pgsql:/bin/bash

Otherwise, you need to create a user called postgres during the installation. This user shouldn’t have login privileges because only root should be able to use su to become this

21

The user foobar can now connect to the database sampledata by using the password secretword, and foobar has all privileges on the database, including the ability to create and destroy tables. For example, the user foobar can now log in to the server (by using the current hostname—shuttle2, in this example), and access the database like so:

514

CHAPTER 21


user and no one will ever log in directly as the user. (See Chapter 10, “Managing Users,” for more information on how to add users to an Ubuntu system.) After you have added the user, you can install each of the PostgreSQL packages you downloaded using the standard dpkg -i command for a default installation.

Initializing the Data Directory in PostgreSQL After the packages have been installed, you need to initialize the data directory. To do so, you must first create the data directory and you must be the root user. The following example assumes that the data directory is /usr/local/pgsql/data. Create the /usr/local/pgsql/data directory (using mkdir) and change the ownerships of the directory (using chown and chgrp) so it is owned by the user postgres. Then use su and, as the user postgres, issue the following commands: # mkdir /usr/local/pgsql # chown postgres /usr/local/pgsql # chgrp postgres /usr/local/pgsql # su - postgres -bash-2.05b$ initdb -D /usr/local/pgsql/data The files belonging to this database system will be owned by user “postgres”. This user must also own the server process. The database cluster will be initialized with locale en_US.UTF-8. This locale setting will prevent the use of indexes for pattern matching operations. If that is a concern, rerun initdb with the collation order set to “C”. For more information see the Administrator’s Guide. creating directory /usr/local/pgsql/data... ok creating creating creating creating creating

directory directory directory directory template1

/usr/local/pgsql/data/base... ok /usr/local/pgsql/data/global... ok /usr/local/pgsql/data/pg_xlog... ok /usr/local/pgsql/data/pg_clog... ok database in /usr/local/pgsql/data/base/1... ok

creating configuration files... ok initializing pg_shadow... ok enabling unlimited row size for system tables... ok initializing pg_depend... ok creating system views... ok loading pg_description... ok creating conversions... ok setting privileges on built-in objects... ok vacuuming database template1... ok


515

copying template1 to template0... ok

/usr/bin/postmaster -D /usr/local/pgsql/data or /usr/bin/pg_ctl -D /usr/local/pgsql/data -l logfile start

This initializes the database and sets the permissions on the data directory to their correct values.

CAUTION The initdb program sets the permissions on the data directory to 700. You should not change these permissions to anything else to avoid creating a security hole.

You can start the postmaster program with the following command (make sure you are still the user postgres): $ postmaster -D /usr/local/pgsql/data &

If you have decided to use a directory other than /usr/local/pgsql/data as the data directory, you should replace the directory in the postmaster command line with whatever directory you are using.

TIP By default, Ubuntu makes the PostgreSQL data directory /var/lib/pgsql/data. This isn’t a very good place to store the data, however, because most people do not have the necessary space in the /var partition for any kind of serious data storage. Note that if you do change the data directory to something else (such as /usr/local/pgsql/data, as in the examples in this section), you need to edit the PostgreSQL startup file (named postgres) located in /etc/init.d to reflect the change.

Creating a Database in PostgreSQL Creating a database in PostgreSQL is straightforward, but it must be performed by a user who has permissions to create databases in PostgreSQL—for example, initially the user named postgres. You can then simply issue the following command from the shell prompt (not the PSQL client prompt, but a normal shell prompt): # su - postgres -bash-2.05b$ createdb database

where database is the name of the database you want to create.

21

Success. You can now start the database server using:

516

CHAPTER 21


The createdb program is actually a wrapper that makes it easier to create databases without having to log in and use psql. However, you can also create databases from within psql with the CREATE DATABASE statement. Here’s an example: CREATE DATABASE database;

You need to create at least one database before you can start the pgsql client program. You should create this database while you’re logged in as the user postgres. To log in as this user, you need to use su to become root and then use su to become the user postgres. To connect to the new database, you start the psql client program with the name of the new database as a command-line argument, like so: $ psql sampledata

If you don’t specify the name of a database when you invoke psql, the command attempts to connect to a database that has the same name as the user as which you invoke psql (that is, the default database).

Creating Database Users in PostgreSQL To create a database user, you use su to become the user postgres from the Linux root account. You can then use the PostgreSQL createuser command to quickly create a user who is allowed to access databases or create new database users, like this: $ createuser phudson Shall the new user be allowed to create databases? (y/n) y Shall the new user be allowed to create more new users? (y/n) y CREATE USER

In this example, the new user named phudson is created and allowed to create new databases and database users (you should carefully consider who is allowed to create new databases or additional users). You can also use the PostgreSQL command-line client to create a new user by typing psql along with name of the database and then use the CREATE USER command to create a new user. Here is an example: CREATE USER foobar ;

CAUTION PostgreSQL allows you to omit the WITH PASSWORD portion of the statement. However, doing so causes the user to be created with no password. This is a security hole, so you should always use the WITH PASSWORD option when creating users.


517

NOTE

Deleting Database Users in PostgreSQL To delete a database user, you use the dropuser command, along with the user’s name, and the user’s access is removed from the default database, like this: $ dropuser msmith DROP USER

You can also log in to your database by using psql and then use the DROP USER commands. Here’s an example: $ psql demodb Welcome to psql, the PostgreSQL interactive terminal. Type: \copyright for distribution terms \h for help with SQL commands \? for help on internal slash commands \g or terminate with semicolon to execute query \q to quit demodb=# DROP USER msmith ; DROP USER demodb=# \q $

Granting and Revoking Privileges in PostgreSQL As in MySQL, granting and revoking privileges in PostgreSQL is done with the GRANT and REVOKE statements. The syntax is the same as in MySQL except that PostgreSQL doesn’t use the IDENTIFIED BY portion of the statement because with PostgreSQL, passwords are assigned when you create the user with the CREATE USER statement, as discussed previously. Here is the syntax of the GRANT statement: GRANT what_to_grant ON where_to_grant TO user_name;

The following command, for example, grants all privileges to the user foobar on the database sampledata: GRANT ALL ON sampledata TO foobar;

21

When you are finished working in the psql command-line client, you can type \q to get out of it and return to the shell prompt.

518

CHAPTER 21


To revoke privileges, you use the REVOKE statement. Here is an example: REVOKE ALL ON sampledata FROM foobar;

This command removes all privileges from the user foobar on the database sampledata. Advanced administration and user configuration are complex topics. This section cannot begin to cover all the aspects of PostgreSQL administration or of privileges and users. For more information on administering PostgreSQL, see the PostgreSQL documentation or consult a book on PostgreSQL, such as PostgreSQL (Sams Publishing).

Database Clients Both MySQL and PostgreSQL use a client/server system for accessing databases. In the simplest terms, the database server handles the requests that come into the database and the database client handles getting the requests to the server as well as getting the output from the server to the user. Users never interact directly with the database server even if it happens to be located on the same machine they are using. All requests to the database server are handled by a database client, which might or might not be running on the same machine as the database server. Both MySQL and PostgreSQL have command-line clients. A command-line client is a very primitive way of interfacing with a database and generally isn’t used by end users. As a DBA, however, you use the command-line client to test new queries interactively without having to write front-end programs for that purpose. In later sections of this chapter, you will learn a bit about the MySQL graphical client and the web-based database administration interfaces available for both MySQL and PostgreSQL. The following sections examine two common methods of accessing a remote database, a method of local access to a database server, and the concept of web access to a database.

NOTE You should consider access and permission issues when setting up a database. Should users be able to create and destroy databases? Or should they only be able to use existing databases? Will users be able to add records to the database and modify existing records? Or should users be limited to read-only access to the database? And what about the rest of the world? Will the general public need to have any kind of access to your database through the Internet? As DBA, you must determine the answers to these questions.

SSH Access to a Database Two types of remote database access scenarios are briefly discussed in this section. In the first scenario, the user directly logs in to the database server through SSH (to take advantage of the security benefits of encrypted sessions) and then starts a program on the server

Database Clients

519

to access the database. In this case, shown in Figure 21.4, the database client is running on the database server itself.

21

Simba

DB Server

DB Client

Cheetah

FIGURE 21.4 The user logs in to the database server located on host simba from the workstation (host cheetah). The database client is running on simba.

In the other scenario, shown in Figure 21.5, the user logs in to a remote host through SSH and starts a program on it to access the database, but the database is actually running on a different system. Three systems are now involved—the user’s workstation, the remote host running the database client, and the remote host running the database server.

Simba DB Server

Leopard DB Client

Cheetah

FIGURE 21.5 The user logs in to the remote host leopard from the workstation (host cheetah) and starts a database client on leopard. The client on leopard then connects to the database server running on host simba. The database client is running on leopard.

CHAPTER 21

520


The important thing to note in Figure 21.5 is the middleman system leopard. Although the client is no longer running on the database server itself, it isn’t running on the user’s local workstation, either.

Local GUI Client Access to a Database A user can log in to the database server by using a graphical client (which could be running on Windows, Macintosh, or a UNIX workstation). The graphical client then connects to the database server. In this case, the client is running on the user’s workstation. Figure 21.6 shows an example.

Simba DB Server

Cheetah Graphical client

FIGURE 21.6 The user starts a GUI database program on his workstation (hostname cheetah). This program, which is the database client, then connects to the database server running on the host simba.

Web Access to a Database In this section, we look at two basic examples of web access to the database server. In the first example, a user accesses the database through a form located on the World Wide Web. At first glance, it might appear that the client is running on the user’s workstation. Of course, in reality it is not; the client is actually running on the web server. The web browser on the user’s workstation simply provides a way for the user to enter the data that he wants to send to the database and a way for the results sent from the database to be displayed to the user. The software that actually handles sending the request to the database is running on the web server in the form of a CGI script; a Java servlet; or embedded scripting such as the PHP or Sun Microsystems, Inc.’s JavaServer Pages (JSP). Often, the terms client and front end are used interchangeably when speaking of database structures. However, Figure 21.7 shows an example of a form of access in which the client and the front end aren’t the same thing at all. In this example, the front end is the form displayed in the user’s web browser. In such cases, the client is referred to as middleware. In another possible web access scenario, it could be said that the client is a two-piece application in which part of it is running on the user’s workstation and the other part is running on the web server. For example, the database programmer can use JavaScript in the web form to ensure that the user has entered a valid query. In this case, the user’s query is partially processed on her own workstation and partially on the web server. Error

Database Clients

521

Simba

Leopard Web server

Cheetah Web browser

FIGURE 21.7 The user accesses the database through the World Wide Web. The front end is the user’s web browser, the client is running on leopard, and the server is running on simba. checking is done on the user’s own workstation, which helps reduce the load on the server and also helps reduce network traffic because the query is checked for errors before being sent across the network to the server.

The MySQL Command-Line Client The MySQL command-line client is mysql, and it has the following syntax: mysql [options] [database]

Some of the available options for mysql are discussed in Table 21.1. database is optional, and if given, it should be the name of the database to which you want to connect.

TABLE 21.1 Command-Line Options to Use When Invoking mysql Option

Action

-h hostname

Connects to the remote host hostname (if the database server isn’t located on the local system).

-u username

Connects to the database as the user username.

-p

Prompts for a password. This option is required if the user you are connecting as needs a password to access the database. Note that this is a lowercase p.

-P n

Specifies n as the number of the port that the client should connect to. Note that this is an uppercase P.

-?

Displays a help message.

More options are available than are listed in Table 21.1, but these are the most common options. See the man page for mysql for more information on the available options.

21

DB Server

522

CHAPTER 21


CAUTION Although mysql allows you to specify the password on the command line after the -p option, and thus allows you to avoid having to type the password at the prompt, you should never invoke the client this way. Doing so causes your password to display in the process list, and the process list can be accessed by any user on the system. This is a major security hole, so you should never give your password on the mysql command line.

You can access the MySQL server without specifying a database to use. After you log in, you use the help command to get a list of available commands, like this: mysql> help

MySQL commands: Note that all text commands must be first on line and end with ‘;’ help (\h) Display this help. ? (\?) Synonym for ‘help’. clear (\c) Clear command. connect (\r) Reconnect to the server. Optional arguments are db and host. edit (\e) Edit command with $EDITOR. ego (\G) Send command to mysql server, display result vertically. exit (\q) Exit mysql. Same as quit. go (\g) Send command to mysql server. nopager (\n) Disable pager, print to stdout. notee (\t) Don’t write into outfile. pager (\P) Set PAGER [to_pager]. Print the query results via PAGER. print (\p) Print current command. quit (\q) Quit mysql. rehash (\#) Rebuild completion hash. source (\.) Execute a SQL script file. Takes a file name as an argument. status (\s) Get status information from the server. tee (\T) Set outfile [to_outfile]. Append everything into given outfile. use (\u) Use another database. Takes database name as argument.

You can then access a database by using the use command and the name of a database that has been created (such as animals) and that you are authorized to connect to, like this: mysql> use animals Database changed mysql>

Database Clients

523

The PostgreSQL Command-Line Client

TABLE 21.2 Command-Line Options to Use When Invoking psql Option

Action

-h hostname

Connects to the remote host hostname (if the database server isn’t located on the local system).

-p n

Specifies n as the number of the port that the client should connect to. Note that this is a lowercase p.

-U username

Connects to the database as the user username.

-W

Prompts for a password after connecting to the database. In PostgreSQL 7 and later, password prompting is automatic if the server requests a password after a connection has been established.

-?

Displays a help message.

Several more options are available in addition to those listed in Table 21.2. See the psql’s man page for details on all the available options.

Graphical Clients If you’d rather interact with a database by using a graphical database client than with the command-line clients discussed in the previous section, you’re in luck: A few options are available. MySQL has an official graphical client, called MySQLGUI. MySQLGUI is available in both source and binary formats from the MySQL website at http://www.mysql.com. Web-based administration interfaces are also available for MySQL and PostgreSQL. phpMyAdmin and phpPgAdmin are two such products. Both of these products are based on the PHP-embedded scripting language and therefore require you to have PHP installed. Of course, you also need to have a web server installed.

21

You invoke the PostgreSQL command-line client with the command psql. Like mysql, psql can be invoked with the name of the database to which you would like to connect. Also like mysql, psql can take several options. These options are listed in Table 21.2.

524

CHAPTER 21


Related Ubuntu and Database Commands The following commands are useful for creating and manipulating databases in Ubuntu: . createdb—Creates a new PostgreSQL database . createuser—Creates a new PostgreSQL user account . dropdb—Deletes a PostgreSQL database . dropuser—Deletes a PostgreSQL user account . mysql—Interactively queries the mysqld server . mysqladmin—Administers the mysqld server . mysqldump—Dumps or backs up MySQL data or tables . pgaccess—Accesses a PostgreSQL database server . pg_ctl—Controls a PostgreSQL server or queries its status . psql—Accesses PostgreSQL via an interactive terminal

Reference The following are references for the databases mentioned in this chapter: . http://www.mysql.com—This is the official website of the MySQL database server. Here you can find the latest versions as well as up-to-date information and online documentation for MySQL. You can also purchase support contracts here. You might want to look into this if you will be using MySQL in a corporate setting. (Many corporations balk at the idea of using software for which the company has no support contract in place.) . http://www.postgresql.org—This is the official website of the PostgreSQL database server. You are asked to select a mirror when you arrive at this site. After you select a mirror, you are taken to the main site. From there, you can find information on the latest versions of PostgreSQL and read the online documentation. . http://www.postgresql.org/idocs/index.php?tutorial-start.html—This interactive HTML documentation tree is a great place to get started with learning how to use PostgreSQL. . http://www.pgsql.com—This is a commercial company that provides fee-based support contracts for the PostgreSQL database.

CHAPTER

22

LDAP

IN THIS CHAPTER . Configuring the Server . Configuring Clients . Administration . Reference

T

he Lightweight Directory Access Protocol (LDAP, pronounced ell-dap) is one of those technologies that, while hidden, forms part of the core infrastructure in enterprise computing. Its job is simple: It stores information about users. However, its power comes from the fact that it can be linked into dozens of other services. LDAP can power login authentication, public key distribution, email routing, and address verification and, more recently, has formed the core of the push toward single-sign-on technology.

TIP Most people find the concept of LDAP easier to grasp when they think of it as a highly specialized form of database server. Behind the scenes, Ubuntu uses a database for storing all its LDAP information; however, LDAP does not offer anything as straightforward as SQL for data manipulation! OpenLDAP uses Sleepycat Software’s Berkeley DB (BDB), and sticking with that default is highly recommended. That said, there are alternatives if you have specific needs.

This chapter looks at a relatively basic installation of an LDAP server, including how to host a companywide directory service that contains the names and email addresses of employees. LDAP is a client/server system, meaning that an LDAP server hosts the data, and an LDAP client queries it. Ubuntu comes with OpenLDAP as its LDAP server, along with several LDAP-enabled email clients, including

526

CHAPTER 22

LDAP

Evolution and Mozilla Thunderbird. We cover all three of these applications in this chapter. Because LDAP data is usually available over the Internet—or at least your local network—it is imperative that you make every effort to secure your server. This chapter gives specific instruction on password configuration for OpenLDAP, and we recommend you follow our instructions closely.

Configuring the Server If you have been using LDAP for years, you will be aware of its immense power and flexibility. On the other hand, if you are just trying LDAP for the first time, it will seem like the most broken component you could imagine. LDAP has specific configuration requirements, is vastly lacking in graphical tools, and has a large number of acronyms to remember. On the bright side, all the hard work you put in will be worth it because, when it works, LDAP will hugely improve your networking experience. The first step in configuring your LDAP server is to install the client and server applications. Start up Synaptic and install the slapd and ldap-utils packages. You’ll be asked to enter an administrator password for slapd. Now, use sudo to edit /etc/ldap/slapd.conf in the text editor of your choice. This is the primary configuration file for slapd, the OpenLDAP server daemon. Scroll down until you see the lines database, suffix, and rootdn. This is the most basic configuration for your LDAP system. What is the name of your server? The dc stands for domain component, which is the name of your domain as stored in DNS—for example, example.com. For our examples, we used hudzilla.org. LDAP considers each part of a domain name (separated by a period) to be a domain component, so the domain hudzilla.org is made up of a domain component hudzilla and a domain component org. Change the suffix line to match your domain components, separated by commas. For example: suffix

“dc=hudzilla,dc=org”

The next line defines the root DN, which is another LDAP acronym meaning distinguished name. A DN is a complete descriptor of a person in your directory: her name and the domain in which she resides. For example rootdn

“cn=root,dc=hudzilla,dc=org”

CN is yet another LDAP acronym, this time meaning common name. A common name is just that—the name a person is usually called. Some people have several common names. Andrew Hudson is a common name, but that same user might also have the common name Andy Hudson. In our rootdn line, we define a complete user: common name root at domain hudzilla.org. These lines are essentially read backward. LDAP goes to org first, searches org for hudzilla, and then searches hudzilla for root.

Configuring the Server

527

The rootdn is important because it is more than just another person in your directory. The root LDAP user is like the root user in Linux. It is the person who has complete control over the system and can make whatever changes he wants to.

{SSHA}qMVxFT2K1UUmrA89Gd7z6EK3gRLDIo2W

That is the password hash generated from your password. Yours will differ from the one shown here, but what is important is that it has {SSHA} at the beginning to denote it uses SHA1. You now need to switch back to the other terminal (the one editing slapd.conf) and add this line below the rootdn line: rootpw

You should replace with the full output from slappasswd, like this: rootpw {SSHA}qMVxFT2K1UUmrA89Gd7z6EK3gRLDIo2W

That sets the LDAP root password to the one you just generated with slappaswd. That is the last change you need to make in the slapd.conf file, so save your changes and close your editor. Back in the terminal, run the slaptest command. This checks your slapd.conf file for errors and ensures you edited it correctly. Presuming there are no errors, run /etc/init.d/slapd to start OpenLDAP. Ubuntu automatically starts OpenLDAP each time you boot up, but that command starts it right now. The final configuration step is to tell Ubuntu which DN it should use if none is specified. You do so by going to System Settings and selecting Authentication. In the dialog box that appears, check Enable LDAP Support in both the User Information tab and Authentication tab. Next, click the Configure LDAP button, enter your DCs (for example, dc=hudzilla,dc=org) for the LDAP Search Base DN, and enter 127.0.0.1 for the LDAP Server. Click OK, and then click OK again.

TIP Checking Enable LDAP Support does not actually change the way in which your users log in. Behind the scenes, this forces Ubuntu to set up the ldap.conf file in /etc/ldap so that LDAP searches that do not specify a base search start point are directed to your DC.

22

Now comes a slightly more complex part: We need to give the LDAP root user a password. The easiest way to do this is to open a new terminal window alongside your existing one. Switch to root in the new terminal and type slappasswd. This tool generates password hashes for OpenLDAP using the SHA1 hash algorithm. Enter a password when it prompts you. When you have entered and confirmed your password, you should see output like this:

528

CHAPTER 22

LDAP

Populating Your Directory With LDAP installed, configured, and running, you can now fill the directory with people. This involves yet more LDAP acronyms and is by no means an easy task, so do not worry if you have to reread this several times before it sinks in. First, create the file base.ldif. You will use this to define the base components of your system: the domain and the address book. LDIF is an acronym standing for LDAP Data Interchange Format, and it is the standard way of recording user data for insertion into an LDAP directory. Here are the contents we used for our example: dn: dc=hudzilla,dc=org objectClass: top objectClass: dcObject objectClass: organization dc: hudzilla o: Hudzilla Dot Org dn: ou=People,dc=hudzilla,dc=org ou: People objectClass: top objectClass: organizationalUnit

This file contains two individual entities, separated by an empty line. The first is our organization, hudzilla.org. The dn lines you know already, as they define each object uniquely in the scope of the directory. The objectClass directive specifies which attributes should be allowed for this entity and which attributes should be required. In this case, we use it to set the DC to hudzilla and to set o (the name of the organization) to Hudzilla Dot Org. The next entity defines the address book, People, in which all our people will be stored. It is defined as an organizational unit, which is what the ou stands for. An organizational unit really is just an arbitrary partition of your company. You might have OUs for marketing, accounting, and management, for example. You need to customize the file to your own requirements. Specifically, change the DCs to those you specified in your slapd.conf. Next, create and edit a new file called people.ldif. This is where you will define entries for your address book, also using LDIF. Here are the people we used in our example: dn: cn=Paul Hudson,ou=People,dc=hudzilla,dc=org objectClass: inetOrgPerson cn: Paul Hudson cn: Hudzilla mail: [email protected] jpegPhoto:< file:///home/paul/paulhudson.jpg sn: Hudson

Configuring the Server

529

dn: cn=Andrew Hudson,ou=People,dc=hudzilla,dc=org objectClass: inetOrgPerson cn: Andrew Hudson cn: IzAndy mail: [email protected] sn: Hudson

22

dn: cn=Nick Veitch,ou=People,dc=hudzilla,dc=org objectClass: inetOrgPerson cn: Nick Veitch cn: CrackAttackKing mail: [email protected] sn: Veitch

There are three entries there, again separated by empty lines. Each person has a DN that is made up of his common name (CN), organizational unit (OU), and domain components (DCs). He also has an objectClass definition, inetOrgPerson, which gives him standard attributes such as an email address, a photograph, and a telephone number. Entities of type inetOrgPerson must have a CN and an SN (surname) so you will see them in this code. Note also that each person has two common names: his actual name and a nickname. Not all LDAP clients support more than one CN, but there is no harm in having several as long as the main one comes first and is listed in the DN.

TIP Having multiple key/value pairs, like multiple CNs, is one of the defining features of LDAP. In today’s interconnected world, few people can be defined using a single set of attributes, because people now have home phone numbers, work phone numbers, cell phone numbers, pager numbers, plus several email addresses, and potentially even a selection of offices where they hot desk. Using multiple CNs and other attributes allows you to properly record these complex scenarios.

The jpegPhoto attribute for the first entity has very particular syntax. Immediately after the colon, you use an opening angle bracket (= first operand to ‘Sending email from Perl is easy!’, ); sendmail(%mail);

Perl ignores the comma after the last element in the hash. It is convenient to leave it there; if you want to add items to the hash, you don’t need to add the comma. This is purely a style decision.

Using Perl to Install a CPAN Module You can use Perl to interactively download and install a Perl module from the CPAN archives by using the -M and -e commands. Start the process by using a Perl like this: # perl -MCPAN -e shell

After you press Enter, you will see some introductory information and be asked to choose an initial automatic or manual configuration, which is required before any download or install takes place. Type no and press Enter to have Perl automatically configure for the download and install process; or, if desired, simply press Enter to manually configure for downloading and installation. If you use manual configuration, you must answer a series of questions regarding paths, caching, terminal settings, program locations, and so on. Settings are saved in a directory named .cpan in current directory. When finished, you will see the CPAN prompt: cpan>

23

.....

554

CHAPTER 23

Using Perl

To have Perl examine your system and then download and install a large number of modules, use the install keyword, specify Bundle at the prompt, and then press Enter like this: cpan> install Bundle::CPAN

To download a desired module (using the example in Listing 23.6), use the get keyword like so: cpan> get Mail::Sendmail

The source for the module will be downloaded into the .cpan directory. You can then build and install the module using the install keyword, like this: cpan> install Mail::Sendmail

The entire process of retrieving, building, and installing a module can also be accomplished at the command line by using Perl’s -e option like this: # perl -MCPAN

-e “install Mail::Sendmail”

Note also that the @ sign did not need to be escaped within single quotation marks (’’). Perl does not interpolate (evaluate variables) within single quotation marks, but does within double quotation marks and here strings (similar to $word=@ARGV[0]; $file=@ARGV[1]; if ($file) { # Open file for reading open (FILE, “$file”) or die “Could not open file: $!”; close FILE;

@lines=;

# Open file for writing open (FILE, “>$file”) or die “Could not open file for writing: $!”; for (@lines) { print FILE unless /$word/;

Code Examples

555

} # End for close FILE; } else { print “Usage: }

#

remove <word> \n”;

End if...else

The code uses a few idiomatic Perl expressions to keep it brief. It reads the file into an array using the notation; it then writes the lines back out to the file unless they match the pattern given on the command line.

Posting to Usenet If some portion of your job requires periodic postings to Usenet—a FAQ listing, for example—the following Perl program can automate the process for you. In the sample code, the posted text is read in from a text file, but your input can come from anywhere. The program shown in Listing 23.8 uses the Net::NNTP module, which is a standard part of the Perl distribution. You can find more documentation on the Net::NNTP module by typing ‘perldoc Net::NNTP’ at the command line.

LISTING 23.8 Posting an Article to Usenet #!/usr/bin/perl # load the post data into @post open (POST, “post.file”); @post = ; close POST; # import the NNTP module use Net::NNTP; $NNTPhost = ‘news’; # attempt to connect to the remote host; # print an error message on failure $nntp = Net::NNTP->new($NNTPhost) or die “Cannot contact $NNTPhost: $!”; # $nntp->debug(1); $nntp->post() or die “Could not post article: $!”; # send the header of the post $nntp->datasend(“Newsgroups: news.announce\n”); $nntp->datasend(“Subject: FAQ - Frequently Asked Questions\n”); $nntp->datasend(“From: ADMIN datasend(“\n\n”);

23

The die function kills program operation and displays an error message if the open statements fail. $! in the error message, as mentioned in the section on special variables, is the error message returned by the operating system. It will likely be something like ‘file not found’ or ‘permission denied’.

556

CHAPTER 23

Using Perl

# for each line in the @post array, send it for (@post) { $nntp->datasend($_); } # End for $nntp->quit;

One-Liners One medium in which Perl excels is the one-liner. Folks go to great lengths to reduce tasks to one line of Perl code. Perl has the rather undeserved reputation of being unreadable. The fact is that you can write unreadable code in any language. Perl allows for more than one way to do something, and this leads rather naturally to people trying to find the most arcane way to do things. Named for Randal Schwartz, a Schwartzian Transform is a way of sorting an array by something that is not obvious. The sort function sorts arrays alphabetically; that is pretty obvious. What if you want to sort an array of strings alphabetically by the third word? Perhaps you want something more useful, such as sorting a list of files by file size? A Schwartzian Transform creates a new list that contains the information that you want to sort by, referencing the first list. You then sort the new list and use it to figure out the order that the first list should be in. Here’s a simple example that sorts a list of strings by length: @sorted_by_length = map { $_ => [0] } # Extract original list sort { $a=>[1] $b=>[1] } # Sort by the transformed value map { [$_, length($_)] } # Map to a list of element lengths @list;

Because each operator acts on the thing immediately to the right of it, it helps to read this from right to left (or bottom to top, the way it is written here). The first thing that acts on the list is the map operator. It transforms the list into a hash in which the keys are the list elements and the values are the lengths of each element. This is where you put in your code that does the transformation by which you want to sort. The next operator is the sort function, which sorts the list by the values. Finally, the hash is transformed back into an array by extracting its keys. The array is now in the desired order.

Command-Line Processing Perl is great at parsing the output of various programs. This is a task for which many people use tools such as awk and sed. Perl gives you a larger vocabulary for performing these tasks. The following example is very simple, but illustrates how you might use Perl to chop up some output and do something with it. In the example, Perl is used to list only those files that are larger than 10KB:

Code Examples

557

$ ls -la | perl -nae ‘print “$F[8] is $F[4]\n” if $F[4] > 10000;’

The -n switch indicates that I want the Perl code run for each line of the output. The -a switch automatically splits the output into the @F array. The -e switch indicates that the Perl code is going to follow on the command line.

Related Ubuntu and Linux Commands You will use these commands and tools when using Perl with Linux: a2p—A filter used to translate awk scripts into Perl

.

find2perl—A utility used to create Perl code from command lines using the find

command .

pcregrep—A utility used to search data using Perl-compatible regular expressions

.

perlcc—A compiler for Perl programs

.

perldoc—A Perl utility used to read Perl documentation

.

s2p—A filter used to translate sed scripts into Perl

.

vi—The vi (actually vim) text editor

Reference The first place to look is in the Perl documentation and Linux man pages. Perl, all of its documentation, and millions of lines of Perl programs are all available free on the Internet. A number of Usenet newsgroups are also devoted to Perl, as are shelves of books and a quarterly journal.

Books Although your local bookstore might have dozens of titles on Perl, the following are some of the more highly recommended of these. You might also look at the Camel Critiques (Tom Christiansen; http://language.perl.com/critiques/index.html) for reviews of other available Perl books. . Advanced Perl Programming, by Sriram Srinivasan, O’Reilly & Associates . Sams Teach Yourself Perl in 21 Days, Second Edition, by Laura Lemay, Sams Publishing . Sams Teach Yourself Perl in 24 Hours, Second Edition, by Clinton Pierce, Sams Publishing . Learning Perl, Third Edition, by Randal L. Schwartz, Tom Phoenix, O’Reilly & Associates . Programming Perl, Third Edition, by Larry Wall, Tom Christiansen, and Jon Orwant, O’Reilly & Associates

23

.

558

CHAPTER 23

Using Perl

. Effective Perl Programming: Writing Better Programs with Perl, by Joseph Hall, AddisonWesley Publishing Company . CGI Programming with Perl, Second Edition, by Gunther Birznieks, Scott Guelich, Shishir Gundavaram, O’Reilly & Associates . Mastering Regular Expressions, by Jeffrey Friedl, O’Reilly & Associates

Usenet Check out the following on Usenet: . comp.lang.perl.misc—Discusses various aspects of the Perl programming language. Make sure that your questions are Perl specific, not generic CGI programming questions. The regulars tend to flame folks who don’t know the difference. . comp.infosystems.www.authoring.cgi—Discusses authoring of CGI programs, so much of the discussion is Perl specific. Make sure that your questions are related to CGI programming, not just Perl. The regulars are very particular about staying on topic.

WWW Check these sites on the World Wide Web: . http://www.perl.com—Tom Christiansen maintains the Perl language home page. This is the place to find all sorts of information about Perl, from its history and culture to helpful tips. This is also the place to download the Perl interpreter for your system. . http://www.perl.com/CPAN—This is part of the site just mentioned, but it merits its own mention. CPAN (Comprehensive Perl Archive Network) is the place for you to find modules and programs in Perl. If you write something in Perl that you think is particularly useful, you can make it available to the Perl community here. . http://www.perl.com/pub/q/FAQs—Frequently Asked Questions index of common Perl queries; this site offers a handy way to quickly search for answers about Perl. . http://learn.perl.org—One of the best places to start learning Perl online. If you master Perl, go to http://jobs.perl.org. . http://www.hwg.org—The HTML Writers Guild is a not-for-profit organization dedicated to assisting web developers. One of its services is a plethora of mailing lists. The hwg-servers mailing list and the hwg-languages mailing list are great places for asking Perl-related questions. . http://www.pm.org—The Perl Mongers are local Perl users groups. There might be one in your area. The Perl advocacy site is http://www.perl.org. . http://www.tpj.com—The Perl Journal is “a reader-supported monthly e-zine” devoted to the Perl programming language. TPJ is always full of excellent, amusing, and informative articles, and is an invaluable resource to both new and experienced Perl programmers.

Code Examples

559

. http://www-106.ibm.com/developerworks/linux/library/l-p101—A short tutorial about one-line Perl scripts and code.

Other Other valuable resources not falling into any of the preceding categories are Perl-related Internet Relay Chat channels. You can usually find several channels available on an IRC server. However, the questions, discussions, and focus of similarly named channels will vary from server to server.

23

For example, a #perlhelp channel is usually for general questions about installing, using, and learning about Perl. A #perl channel is generally for more advanced questions, but on some servers beginner questions might be welcomed. You might also find some helpful answers on #cgi and #html channels. Browse to http://perl-begin.berlios.de/irc for a list of servers.


CHAPTER

24

Working with Python

IN THIS CHAPTER . Python on Linux . The Basics of Python . Functions . Object Orientation . The Standard Library and the Vaults of Parnassus

As PHP has come to dominate the world of web scripting, Python is increasingly dominating the domain of command-line scripting. Python’s precise and clean syntax makes it one of the easiest languages to learn, and it allows programmers to code more quickly and spend less time maintaining their code. Although PHP is fundamentally similar to Java and Perl, Python is closer to C and Modula3, and so it might look unfamiliar at first. Most of the other languages have a group of developers at their cores, but Python has Guido van Rossum—creator, father, and Benevolent Dictator For Life (BDFL). Although Guido spends less time working on Python now, he still essentially has the right of veto changes to the language, which has enabled it to remain consistent over the many years of its development. The end result is that, in Guido’s own words, “Even if you are in fact clueless about language design, you can tell that Python is a very simple language.” The following pages constitute a “quick-start” tutorial to Python designed to give you all the information you need to put together basic scripts and to point you toward resources that can take you further.

Python on Linux Ubuntu comes with Python installed by default, as do many other versions of Linux and UNIX—even Mac OS X comes with Python preinstalled. Part of this is due to

. Reference

562

CHAPTER 24

Working with Python

convenience because it is such a popular scripting language and it saves having to install it later if the user wants to run a script. The Python binary is installed into /usr/bin/python; if you run that, you enter the Python interactive interpreter where you can type commands and have them executed immediately. Although PHP also has an interactive mode (use php –a to activate it), it is neither as powerful nor as flexible as Python’s. As with Perl, PHP, and other scripting languages, you can also execute Python scripts by adding a shebang line (#!) to the start of your scripts that point to /usr/bin/python and then setting the file to be executable. The third and final way to run Python scripts is through mod_python, which you can install through synaptic. For the purposes of this introduction, we use the interactive Python interpreter because it provides immediate feedback on commands as you type them.

Getting Interactive We will be using the interactive interpreter for this chapter, so it is essential that you are comfortable using it. To get started, open a terminal and run the command python. You should see this: [paul@caitlin ~]$ python Python 2.4.3 (#2, Apr 27 2006, 14:43:58) [GCC 4.0.3 (Ubuntu 4.0.3-1ubuntu5)] on linux2 Type “help”, “copyright”, “credits” or “license” for more information. >>>

The >>> is where you type your input, and you can set and get a variable like this: >>> python = ‘great’ >>> python ‘great’ >>>

On line one, the variable python is set to the text great, and on line two that value is read back from the variable simply by typing the name of the variable you want to read. Line three shows Python printing the variable; on line four you are back at the prompt to type more commands. Python remembers all the variables you use while in the interactive interpreter, which means you can set a variable to be the value of another variable. When you are done, press Ctrl+D to exit. At this point, all your variables and commands are forgotten by the interpreter, which is why complex Python programs are always saved in scripts!

The Basics of Python

563

The Basics of Python Python is a language wholly unlike most others, and yet it is so logical that most people can pick it up quickly. You have already seen how easily you can assign strings, but in Python nearly everything is that easy—as long as you remember the syntax!

Numbers The way Python handles numbers is more precise than some other languages. It has all the normal operators—such as + for addition, - for subtraction, / for division, and * for multiplication—but it adds % for modulus (division remainder), ** for raise to the power, and // for floor division. It is also specific about which type of number is being used, as this example shows: a = 5 b = 10 a * b a / b b = 10.0 a / b a // b

The first division returns 0 because both a and b are integers (whole numbers), so Python calculates the division as an integer, giving 0. By converting b to 10.0, Python considers it to be a floating-point number, and so the division is now calculated as a floating-point value, giving 0.5. Even with b being floating point, using //—floor division—rounds it down. Using **, you can easily see how Python works with integers: >>> 2 ** 30 1073741824 >>> 2 ** 31 2147483648L

The first statement raises 2 to the power of 30 (that is, 2 ×; 2 ×; 2 ×; 2 ×; 2 ×; ...), and the second raises 2 to the power of 31. Notice how the second number has a capital L on the end of it—this is Python telling you that it is a long integer. The difference between long integers and normal integers is slight but important: Normal integers can be calculated using simple instructions on the CPU, whereas long integers—because they can be as big as you need them to be—need to be calculated in software and therefore are slower.

24

>>> >>> >>> 50 >>> 0 >>> >>> 0.5 >>> 0.0

564

CHAPTER 24

Working with Python

When specifying big numbers, you need not put the L at the end—Python figures it out for you. Furthermore, if a number starts off as a normal number and then exceeds its boundaries, Python automatically converts it to a long integer. The same is not true the other way around: If you have a long integer and then divide it by another number so that it could be stored as a normal integer, it remains a long integer: >>> num = 999999999999999999999999999999999L >>> num = num / 1000000000000000000000000000000 >>> num 999L

You can convert between number types using typecasting, like this: >>> num = 10 >>> int(num) 10 >>> float(num) 10.0 >>> long(num) 10L >>> floatnum = 10.0 >>> int(floatnum) 10 >>> float(floatnum) 10.0 >>> long(floatnum) 10L

You need not worry whether you are using integers or long integers; Python handles it all for you, so you can concentrate on getting the code right.

More on Strings Python stores strings as an immutable sequence of characters—a jargon-filled way of saying that “it is a collection of characters that, once set, cannot be changed without creating a new string.” Sequences are important in Python. There are three primary types, of which strings are one, and they share some properties. Mutability makes much sense when you learn about lists in the next section. As you saw in the previous example, you can assign a value to strings in Python with just an equal sign, like this: >>> mystring = ‘hello’; >>> myotherstring = “goodbye”; >>> mystring ‘hello’ >>> myotherstring; ‘goodbye’


565

>>> test = “Are you really Bill O’Reilly?” >>> test “Are you really Bill O’Reilly?”

The first example encapsulates the string in single quotation marks, and the second and third in double quotation marks. However, printing the first and second strings show them both in single quotation marks because Python does not distinguish between the two. The third example is the exception—it uses double quotation marks because the string itself contains a single quotation mark. Here, Python prints the string with double quotation marks because it knows it contains the single quotation mark. Because the characters in a string are stored in sequence, you can index into them by specifying the character you are interested in. Like most other languages, these indexes are zero based, which means you need to ask for character 0 to get the first letter in a string. For example:

24

>>> string = “This is a test string” >>> string ‘This is a test string’ >>> string[0] ‘T’ >>> string [0], string[3], string [20] (‘T’, ‘s’, ‘g’)

The last line shows how, with commas, you can ask for several indexes at the same time. You could print the entire first word using this: >>> string[0], string[1], string[2], string[3] (‘T’, ‘h’, ‘i’, ‘s’)

However, for that purpose you can use a different concept: slicing. A slice of a sequence draws a selection of indexes. For example, you can pull out the first word like this: >>> string[0:4] ‘This’

The syntax there means “take everything from position 0 (including 0) and end at position 4 (excluding it).” So, [0:4] copies the items at indexes 0, 1, 2, and 3. You can omit either side of the indexes, and it will copy either from the start or to the end: >>> string [:4] ‘This’ >>> string [5:] ‘is a test string’ >>> string [11:] ‘est string’

566

CHAPTER 24

Working with Python

You can also omit both numbers, and it will give you the entire sequence: >>> string [:] ‘This is a test string’

Later you will learn precisely why you would want to do that, but for now there are a number of other string intrinsics that will make your life easier. For example, you can use the + and * operators to concatenate (join) and repeat strings, like this: >>> mystring = “Python” >>> mystring * 4 ‘PythonPythonPythonPython’ >>> mystring = mystring + “ rocks! “ >>> mystring * 2 ‘Python rocks! Python rocks! ‘

In addition to working with operators, Python strings come with a selection of built-in methods. You can change the case of the letters with capitalize() (uppercases the first letter and lowercases the rest), lower() (lowercases them all), title() (uppercases the first letter in each word), and upper() (uppercases them all). You can also check whether strings match certain cases with islower(), istitle(), and isupper(); that also extends to isalnum() (returns true if the string is letters and numbers only) and isdigit() (returns true if the string is all numbers). This example demonstrates some of these in action: >>> string ‘This is a test string’ >>> string.upper() ‘THIS IS A TEST STRING’ >>> string.lower() ‘this is a test string’ >>> string.isalnum() False >>> string = string.title() >>> string ‘This Is A Test String’

Why did isalnum() return false—our string contains only alphanumeric characters, doesn’t it? Well, no. There are spaces in there, which is what is causing the problem. More important, we were calling upper() and lower() and they were not changing the contents of the string—they just returned the new value. So, to change our string from This is a test string to This Is A Test String, we actually have to assign it back to the string variable.


567

Lists Python’s built-in list data type is a sequence, like strings. However, they are mutable, which means they can be changed. Lists are like arrays in that they hold a selection of elements in a given order. You can cycle through them, index into them, and slice them:

The brackets notation is important: You cannot use parentheses, (( and )) or braces ({ and }) for lists. Using + for lists is different from using + for numbers. Python detects you are working with a list and appends one list to another. This is known as operator overloading, and it is one of the reasons Python is so flexible. Lists can be nested, which means you can put a list inside a list. However, this is where mutability starts to matter, and so this might sound complicated! If you recall, the definition of an immutable string sequence is that it is a collection of characters that, once set, cannot be changed without creating a new string. Lists are mutable as opposed to immutable, which means you can change your list without creating a new list. This becomes important because Python, by default, copies only a reference to a variable rather than the full variable. For example: >>> >>> >>> [1, >>>

list1 = [1, 2, 3] list2 = [4, list1, 6] list1 2, 3] list2

[4, [1, 2, 3], 6]

Here we have a nested list. list2 contains 4, then list1, then 6. When you print the value of list2, you can see it also contains list1. Now, proceeding on from that: >>> list1[1] = “Flake”

24

>>> mylist = [“python”, “perl”, “php”] >>> mylist [‘python’, ‘perl’, ‘php’] >>> mylist + [“java”] [‘python’, ‘perl’, ‘php’, ‘java’] >>> mylist * 2 [‘python’, ‘perl’, ‘php’, ‘python’, ‘perl’, ‘php’] >>> mylist[1] ‘perl’ >>> mylist[1] = “c++” >>> mylist[1] ‘c++’ >>> mylist[1:3] [‘c++’, ‘php’]

568

CHAPTER 24

Working with Python

>>> list2 [4, [1, ‘Flake’, 3], 6]

In line one, we set the second element in list1 (remember, sequences are zero based!) to be Flake rather than 2; then we print the contents of list2. As you can see, when list1 changed, list2 was updated, too. The reason for this is that list2 stores a reference to list1 as opposed to a copy of list1; they share the same value. We can show that this works both ways by indexing twice into list2, like this: >>> list2[1][1] = “Caramello” >>> list1 [1, ‘Caramello’, 3]

The first line says, “Get the second element in list2 (list1) and the second element of that list, and set it to be ‘Caramello’.” Then list1’s value is printed, and you can see it has changed. This is the essence of mutability: We are changing our list without creating a new list. On the other hand, editing a string creates a new string, leaving the old one unaltered. For example: >>> >>> >>> [1, >>> >>> [1,

mystring = “hello” list3 = [1, mystring, 3] list3 ‘hello’, 3] mystring = “world” list3 ‘hello’, 3]

Of course, this raises the question of how you copy without references when references are the default. The answer, for lists, is that you use the [:] slice, which we looked at earlier. This slices from the first element to the last, inclusive, essentially copying it without references. Here is how that looks: >>> list4 = [“a”, “b”, “c”] >>> list5 = list4[:] >>> list4 = list4 + [“d”] >>> list5 [‘a’, ‘b’, ‘c’] >>> list4 [‘a’, ‘b’, ‘c’, ‘d’]

Lists have their own collections of built-in methods, such as sort(), append(), and pop(). The latter two add and remove single elements from the end of the list, with pop() also returning the removed element. For example: >>> list5 = [“nick”, “paul”, “julian”, “graham”] >>> list5.sort() >>> list5


569

[‘graham’, ‘julian’, ‘nick’, ‘paul’] >>> list5.pop() ‘paul’ >>> list5 [‘graham’, ‘julian’, ‘nick’] >>> list5.append(“Rebecca”)

In addition, one interesting method of strings returns a list: split(). This takes a character to split by and then gives you a list in which each element is a chunk from the string. For example: >>> string = “This is a test string”; >>> string.split(“ “) [‘This’, ‘is’, ‘a’, ‘test’, ‘string’]

Dictionaries Unlike lists, dictionaries are collections with no fixed order. Instead, they have a key (the name of the element) and a value (the content of the element), and Python places them wherever it needs to for maximum performance. When defining dictionaries, you need to use braces ({ }) and colons (:). You start with an opening brace and then give each element a key and a value, separated by a colon, like this: >>> mydict = { “perl” : “a language”, “php” : “another language” } >>> mydict {‘php’: ‘another language’, ‘perl’: ‘a language’}

This example has two elements, with keys perl and php. However, when the dictionary is printed, we find that php comes before perl—Python hasn’t respected the order in which we entered them. We can index into a dictionary using the normal code: >>> mydict[“perl”] ‘a language’

However, because a dictionary has no fixed sequence, we cannot take a slice, or index by position. Like lists, dictionaries are mutable and can also be nested; however, unlike lists, you cannot merge two dictionaries by using +. This is because dictionary elements are located using the key. Therefore, having two elements with the same key would cause a clash. Instead, you should use the update() method, which merges two arrays by overwriting clashing keys. You can also use the keys() method to return a list of all the keys in a dictionary.

24

Lists are used extensively in Python, although this is slowly changing as the language matures.

570

CHAPTER 24

Working with Python

Conditionals and Looping So far, we have just been looking at data types, which should show you how powerful Python’s data types are. However, you simply cannot write complex programs without conditional statements and loops. Python has most of the standard conditional checks, such as, (greater than), >> mystring = “J Random Hacker” >>> “r” in mystring True >>> “Hacker” in mystring True >>> “hacker” in mystring False

The last example demonstrates how in is case sensitive. We can use the operator for lists, too: >>> mylist = [“soldier”, “sailor”, “tinker”, “spy”] >>> “tailor” in mylist False

Other comparisons on these complex data types are done item by item: >>> list1 = [“alpha”, “beta”, “gamma”] >>> list2 = [“alpha”, “beta”, “delta”] >>> list1 > list2 True

list1’s first element (alpha) is compared against list2’s first element (alpha) and, because they are equal, the next element is checked. That is equal also, so the third element is checked, which is different. The g in gamma comes after the d in delta in the alphabet, so gamma is considered greater than delta and list1 is considered greater than list2. Loops come in two types, and both are equally flexible. For example, the for loop can iterate through letters in a string or elements in a list: >>> string = “Hello, Python!” >>> for s in string: print s, ... H e l l o , P y t h o n !

The for loop takes each letter in string and assigns it to s. This then is printed to the screen using the print command, but note the comma at the end; this tells Python not to insert a line break after each letter. The “...” is there because Python allows you to enter more code in the loop; you need to press Enter again here to have the loop execute.


571

The exact same construct can be used for lists: >>> mylist = [“andi”, “rasmus”, “zeev”] >>> for p in mylist: print p ... andi rasmus zeev

Without the comma after the print statement, each item is printed on its own line. The other loop type is the while loop, and it looks similar:

That is an infinite loop (it will carry on printing that text forever), so you need to press Ctrl+C to interrupt it and regain control. If you want to use multiline loops, you need to get ready to use your Tab key: Python handles loop blocks by recording the level of indent used. Some people find this odious; others admire it for forcing clean coding on users. Most of us, though, just get on with programming! For example: >>> i = 0 >>> while i < 3: ... j = 0 ... ...

while j < 3: print “Pos: “ + str(i) + “,” + str(j) + “)”

... ... ...

i += 1

j += 1

Pos: (0,0) Pos: (0,1) Pos: (0,2) Pos: (1,0)

24

>> while 1: print “This will loop forever!” ... This will loop forever! This will loop forever! This will loop forever! This will loop forever! This will loop forever! (etc) Traceback (most recent call last): File “<stdin>”, line 1, in ? KeyboardInterrupt >>>

572

CHAPTER 24

Working with Python

Pos: (1,1) Pos: (1,2) Pos: (2,0) Pos: (2,1) Pos: (2,2)

You can control loops using the break and continue keywords. break exits the loop and continues processing immediately afterward, and continue jumps to the next loop iteration.

Functions Other languages—such as PHP—read and process an entire file before executing it, which means you can call a function before it is defined because the compiler reads the definition of the function before it tries to call it. Python is different: If the function definition has not been reached by the time you try to call it, you get an error. The reason behind this behavior is that Python actually creates an object for your function, and that in turns means two things. First, you can define the same function several times in a script and have the script pick the right one at runtime. Second, you can assign the function to another name just by using =. Function definition starts with def, then the function name, then parentheses and a list of parameters, and then a colon. The contents of a function need to be indented at least one level beyond the definition. So, using function assignment and dynamic declaration, you can write a script that prints the right greeting in a roundabout manner: >>> def hello_english(Name): ... print “Hello, “ + Name + “!” ... >>> def hello_hungarian(Name): ... print “Szia, “ + Name + “!” ... >>> hello = hello_hungarian >>> hello(“Paul”) Szia, Paul! >>> hello = hello_english >>> hello(“Paul”)

Notice that function definitions include no type information. Functions are typeless, like we said. The upside of this is that you can write one function to do several things: >>> def concat(First, Second): ... return First + Second ... >>> concat([“python”], [“perl”]) [‘python’, ‘perl’] >>> concat(“Hello, “, “world!”)

Object Orientation

573

‘Hello, world!’

That demonstrates how the return statement sends a value back to the caller, but also how a function can do one thing with lists and another thing with strings. The magic here is being accomplished by the objects. We write a function that tells two objects to add themselves together, and the objects intrinsically know how to do that. If they don’t—if, perhaps, the user passes in a string and an integer—Python catches the error for us. However, it is this hands-off, “let the objects sort themselves out” attitude that makes functions so flexible. Our concat() function could conceivably concatenate strings, lists, or zonks—a data type someone created herself that allows adding. The point is that we do not limit what our function can do—tacky as it might sound, the only limit is your imagination!

After having read this far, you should not be surprised to hear that Python’s object orientation is flexible and likely to surprise you if you have been using C-like languages for several years. The best way to learn Python object-oriented programming (OOP) is to just do it. So, here is a basic script that defines a class, creates an object of that class, and calls a function: class dog(object): def bark(self): print “Woof!” fluffy = dog() fluffy.bark()

Defining a class starts, predictably, with the class keyword followed by the name of the class you are defining and a colon. The contents of that class need to be indented one level so that Python knows where it stops. Note that the object inside parentheses is there for object inheritance, which is discussed later. For now, the least you need to know is that if your new class is not based on an existing class, you should put object inside parentheses as shown in the previous code. Functions inside classes work in much the same way as normal functions do (although they are usually called methods), with the main difference being that they should all take at least one parameter, usually called self. This parameter is filled with the name of the object the function was called on, and you need to use it explicitly. Creating an instance of a class is done by assignment. You do not need any new keyword, as in some other languages—you just provide empty parentheses. Calling a function of that object is done using a period, the name of the class to call, with any parameters being passed inside parentheses.

24

Object Orientation

574

CHAPTER 24

Working with Python

Class and Object Variables Each object has its own set of functions and variables, and you can manipulate those variables independently of objects of the same type. In addition, some class variables are set to a default value for all classes and can be manipulated globally. This script demonstrates two objects of the dog class being created, each with its own name: class dog(object): name = “Lassie” def bark(self): print self.name + “ says ‘Woof!’” def setName(self, name): self.name = name fluffy = dog() fluffy.bark() poppy = dog() poppy.setName(“Poppy”) poppy.bark()

That outputs the following: Lassie says ‘Woof!’ Poppy says ‘Woof!’

There, each dog starts with the name Lassie, but it gets customized. Keep in mind that Python assigns by reference by default, meaning each object has a reference to the class’s name variable, and as we assign that with the setName() method, that reference is lost. What this means is that any references we do not change can be manipulated globally. Thus, if we change a class’s variable, it also changes in all instances of that class that have not set their own value for that variable. For example: class dog(object): name = “Lassie” color = “brown” fluffy = dog() poppy = dog() print fluffy.color dog.color = “black” print poppy.color fluffy.color = “yellow” print fluffy.color print poppy.color

So, the default color of dogs is brown—both the fluffy and poppy dog objects start off as brown. Then, using dog.color, we set the default color to be black, and because neither of the two objects has set its own color value, they are updated to be black. The third to last line uses poppy.color to set a custom color value for the poppy object—poppy becomes yellow, while fluffy and the dog class in general remain black.

Object Orientation

575

Constructors and Destructors To help you automate the creation and deletion of objects, you can easily override two default methods: __init__ and __del__. These are the methods called by Python when a class is being instantiated and freed, known as the constructor and destructor, respectively. Having a custom constructor is great for when you need to accept a set of parameters for each object being created. For example, you might want each dog to have its own name on creation, and you could implement that with this code:

If you do not provide a name parameter when creating the dog object, Python reports an error and stops. You can, of course, ask for as many constructor parameters as you want, although it is usually better to ask only for the ones you need and have other functions to fill in the rest. On the other side of things is the destructor method, which allows you to have more control over what happens when an object is destroyed. Using the two, we can show the life cycle of an object by printing messages when it is created and deleted: class dog(object): def __init__(self, name): self.name = name print self.name + “ is alive!” def __del__(self): print self.name + “ is no more!” fluffy = dog(“Fluffy”)

The destructor is there to give you the chance to free up resources allocated to the object or perhaps log something to a file.

Class Inheritance Python allows you to reuse your code by inheriting one class from one or more others. For example, lions, tigers, and bears are all mammals and so share a number of similar properties. In that scenario, you would not want to have to copy and paste functions between them; it would be smarter (and easier!) to have a mammal class that defines all the shared functionality and then inherit each animal from that. Consider the following code: class car(object): color = “black” speed = 0

24

class dog(object): def __init__(self, name): self.name = name fluffy = dog(“Fluffy”) print fluffy.name

CHAPTER 24

576

Working with Python

def accelerateTo(self, speed): self.speed = speed def setColor(self, color): self.color = color mycar = car() print mycar.color

That creates a car class with a default color and also provides a setColor() function so people can change their own colors. Now, what do you drive to work? Is it a car? Sure it is, but chances are it is a Ford, or a Dodge, or a Jeep, or some other make—you don’t get cars without a make. On the other hand, you do not want to have to define a class Ford, give it the methods accelerateTo(), setColor(), and however many other methods a basic car has and then do exactly the same thing for Ferrari, Nissan, and so on. The solution is to use inheritance: Define a car class that contains all the shared functions and variables of all the makes and then inherit from that. In Python, you do this by putting the name of the class from which to inherit inside parentheses in the class declaration, like this: class car(object): color = “black” speed = 0 def accelerateTo(self, speed): self.speed = speed def setColor(self, color): self.color = color class class mycar print

ford(car): pass nissan(car): pass = ford() mycar.color

The pass directive is an empty statement—it means our class contains nothing new. However, because the ford and nissan classes inherit from the car class, they get color, speed, accelerateTo(), and setColor() provided by their parent class. Note that we do not need object after the class names for ford and nissan because they are inherited from an existing class: car. By default, Python gives you all the methods the parent class has, but you can override that by providing new implementations for the classes that need them. For example: class modelt(car): def setColor(self, color): print “Sorry, Model Ts only come in black!” myford = ford() ford.setColor(“green”)

The Standard Library and the Vaults of Parnassus

577

mycar = modelt() mycar.setColor(“green”)

The first car is created as a Ford, so setColor() will work fine because it uses the method from the car class. However, the second car is created as a Model T, which has its own setColor() method, so the call will fail. This provides an interesting scenario: What do you do if you have overridden a method and yet want to call the parent’s method also? If, for example, changing the color of a Model T was allowed but just cost extra, we would want to print a message saying, “You owe $50 more,” but then change the color. To do this, we need to use the class object from which our current class is inherited—car in this example. Here’s an example:

mycar = modelt() mycar.setColor(“green”) print mycar.color

That prints the message and then changes the color of the car.

The Standard Library and the Vaults of Parnassus A default Python install includes many modules (blocks of code) that enable you to interact with the operating system, open and manipulate files, parse command-line options, perform data hashing and encryption, and much more. This is one of the reasons most commonly cited when people are asked why they like Python so much—it comes stocked to the gills with functionality you can take advantage of immediately. In fact, the number of modules included in the Standard Library is so high that entire books have been written about them—try Python Standard Library (O’Reilly, ISBN: 0-596-00096-0) for a comprehensive, if slightly dated, list of them. For unofficial scripts and add-ons for Python, the recommended starting place is called the Vaults of Parnassus: http://py.vaults.ca. There you can find about 20,000 public scripts and code examples for everything from mathematics to games.

Reference The Python website (http://www.python.org) is packed with information and updated regularly. This should be your first stop, if only to read the latest Python news. . http://www.zope.org—The home page of the Zope Content Management System (CMS), it’s one of the most popular CMSes around and, more important, written entirely in Python.

24

class modelt(car): def setColor(self, color): print “You owe $50 more” car.setColor(self, color)

578

CHAPTER 24

Working with Python

. http://www.jython.org—Python also has an excellent Java-based interpreter to allow it to run on other platforms. If you prefer Microsoft .NET, try http://www. ironpython.com. . http://www.pythonline.com—Guido van Rossum borrowed the name for his language from Monty Python’s Flying Circus, and as a result many Python code examples use oblique Monty Python references. A visit to the official Monty Python site to hone your Python knowledge is highly recommended! There are few truly great books about Python; however, you can find a list of what’s on offer at http://www.python.org/moin/PythonBooks. If you are desperate to pick up a book immediately, you could do much worse than choose Learning Python (O’Reilly, ISBN: 0-596-00281-5).

CHAPTER

25

Writing PHP Scripts

IN THIS CHAPTER . Introduction to PHP . Basic Functions . Handling HTML Forms . Databases . Reference

This chapter introduces you to the world of PHP programming, from the point of view of using it as a web scripting language and as a command-line tool. PHP originally stood for personal home page because it was a collection of Perl scripts designed to ease the creation of guest books, message boards, and other interactive scripts commonly found on home pages. However, since those early days, it has received two major updates (PHP 3 and PHP 4), plus a substantial revision in PHP 5, which is the version bundled with Ubuntu. Part of the success of PHP has been its powerful integration with databases—its earliest uses nearly always took advantage of a database back end. In PHP 5, however, two big new data storage mechanisms were introduced: SQLite, which is a powerful and local database system, and SimpleXML, which is an application programming interface (API) designed to make XML parsing and querying easy. As you will see over time, the PHP developers did a great job: Both SQLite and SimpleXML are easy to learn and use.

NOTE Many packages for PHP are available through synaptic. The basic package is just called php5, but you might also want to add extensions such as php5ldap, php5-mysql, or php5-pgsql. Choose only the extensions you plan to use; otherwise, it will waste system resources.

580

CHAPTER 25

Writing PHP Scripts

Introduction to PHP In terms of the way it looks, PHP is a cross between Java and Perl, having taken the best aspects of both and merged them successfully into one language. The Java parts include a powerful object-orientation system, the capability to throw program exceptions, and the general style of writing that both languages borrowed from C. Borrowed from Perl is the “it should just work” mentality where ease of use is favored over strictness. As a result, you will find a lot of “there is more than one way to do it” in PHP.

Entering and Exiting PHP Mode Unlike PHP’s predecessors, you embed your PHP code inside your HTML as opposed to the other way around. Before PHP, many websites had standard HTML pages for most of their content, linking to Perl CGI pages to do back-end processing when needed. With PHP, all your pages are capable of processing and containing HTML. Each .php file is processed by PHP that looks for code to execute. PHP considers all the text it finds to be HTML until it finds one of four things: . (for

Ubuntu Unleashed 2010 Edition: Covering 9.10 and 10.4 (5th Edition)

Ubuntu Unleashed 2010 Edition: Covering 9.10 and 10.4 (5th Edition)

Ubuntu Unleashed 2010 Edition: Covering 9.10 and 10.4

Ubuntu Unleashed 2008 Edition: Covering 8.04 and 8.10

Ubuntu 7.10 Linux Unleashed, 3rd Edition

The Official Ubuntu Book, 5th Edition

Advanced Visual Basic 2010, 5th Edition

Unix Unleashed (4th Edition)

Geosystems Animation Edition (5th Edition)

UNIX Unleashed, Internet Edition

Beginning Ubuntu Linux, Fourth Edition

Beginning Ubuntu Linux, Fifth Edition

Fedora Unleashed, 2008 Edition (8th Edition)

Beginning Ubuntu Linux, Third Edition

Computability and Logic, 5th Edition

Baker's Manual (5th Edition)

Classical Mechanics, 5th Edition

Wilderness Medicine, 5th Edition

Genealogy Online, 5th Edition

Microeconomics (5th Edition)

Wilderness Medicine, 5th Edition

Econometric Analysis (5th Edition)

Psychology, 5th Edition

Psychology, 5th Edition

Biostatistical Analysis (5th Edition)

SQL Programming, 5th Edition

Frommer's Utah 5th edition

BRS Embryology, 5th Edition

Rheumatology, 5th Edition

Frommer's Brazil, 5th Edition

Sociology (5th edition)

Ubuntu Unleashed 2010 Edition: Covering 9.10 and 10.4 (5th Edition)