Shape Interrogation for Computer Aided Design and Manufacturing
Nicholas M. Patrikalakis • Takashi Maekawa
Shape Interrogation for Computer Aided Design and Manufacturing
Nicholas M. Patrikalakis Massachusetts Institute of Technology Department of Mechanical Engineering Room 5-230A 77 Massachusetts Avenue Cambridge, MA 02139-4307 USA
[email protected] Takashi Maekawa Department of Mechanical Engineering Yokohama National University 79-5, Tokiwadai, Hodogaya, Yokohama 240-8501 Japan
[email protected] ISBN 978-3-540-42454-3 (hardcover) e-ISBN 978-3-642-04074-0 ISBN 978-3-642-04073-3 (softcover) DOI 10.1007/978-3-642-04074-0 Springer Heidelberg Dordrecht London New York Library of Congress Control Number: 2009939440 © Springer-Verlag Berlin Heidelberg 2002, First softcover printing 2010 This work is subject to copyright. All rights are reserved, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilm or in any other way, and storage in data banks. Duplication of this publication or parts thereof is permitted only under the provisions of the German Copyright Law of September 9, 1965, in its current version, and permission for use must always be obtained from Springer. Violations are liable to prosecution under the German Copyright Law. The use of general descriptive names, registered names, trademarks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. Typesetting: Typeset by the authors using a Springer TeX macro package Cover design: WMX Design GmbH Printed on acid-free paper Springer is part of Springer Science+Business Media (www.springer.com)
N.M. Patrikalakis and T. Maekawa, Shape Interrogation for Computer Aided Design and Manufacturing, DOI 10.1007/978-3-642-04074-0_1, © Springer-Verlag Berlin Heidelberg 2010
1
N.M. Patrikalakis and T. Maekawa, Shape Interrogation for Computer Aided Design and Manufacturing, DOI 10.1007/978-3-642-04074-0_3, © Springer-Verlag Berlin Heidelberg 2010
49
N.M. Patrikalakis and T. Maekawa, Shape Interrogation for Computer Aided Design and Manufacturing, DOI 10.1007/978-3-642-04074-0_4, © Springer-Verlag Berlin Heidelberg 2010
73
N.M. Patrikalakis and T. Maekawa, Shape Interrogation for Computer Aided Design and Manufacturing, DOI 10.1007/978-3-642-04074-0_5, © Springer-Verlag Berlin Heidelberg 2010
109
N.M. Patrikalakis and T. Maekawa, Shape Interrogation for Computer Aided Design and Manufacturing, DOI 10.1007/978-3-642-04074-0_6, © Springer-Verlag Berlin Heidelberg 2010
161
N.M. Patrikalakis and T. Maekawa, Shape Interrogation for Computer Aided Design and Manufacturing, DOI 10.1007/978-3-642-04074-0_7, © Springer-Verlag Berlin Heidelberg 2010
181
N.M. Patrikalakis and T. Maekawa, Shape Interrogation for Computer Aided Design and Manufacturing, DOI 10.1007/978-3-642-04074-0_8, © Springer-Verlag Berlin Heidelberg 2010
195
N.M. Patrikalakis and T. Maekawa, Shape Interrogation for Computer Aided Design and Manufacturing, DOI 10.1007/978-3-642-04074-0_9, © Springer-Verlag Berlin Heidelberg 2010
231
N.M. Patrikalakis and T. Maekawa, Shape Interrogation for Computer Aided Design and Manufacturing, DOI 10.1007/978-3-642-04074-0_10, © Springer-Verlag Berlin Heidelberg 2010
265
N.M. Patrikalakis and T. Maekawa, Shape Interrogation for Computer Aided Design and Manufacturing, DOI 10.1007/978-3-642-04074-0_11, © Springer-Verlag Berlin Heidelberg 2010
293
