http://www.avaxhome.ws/blogs/Johnny77
http://www.avaxhome.ws/blogs/Johnny77
http://www.avaxhome.ws/blogs/Johnny77
...
177 downloads
1189 Views
12MB Size
Report
This content was uploaded by our users and we assume good faith they have the permission to share this book. If you own the copyright to this book and it is wrongfully on our website, we offer a simple DMCA procedure to remove your content from our site. Start by pressing the button below!
Report copyright / DMCA form
http://www.avaxhome.ws/blogs/Johnny77
http://www.avaxhome.ws/blogs/Johnny77
http://www.avaxhome.ws/blogs/Johnny77
http://www.avaxhome.ws/blogs/Johnny77
http://www.avaxhome.ws/blogs/Johnny77
http://www.avaxhome.ws/blogs/Johnny77
http://www.avaxhome.ws/blogs/Johnny77
http://www.avaxhome.ws/blogs/Johnny77
http://www.avaxhome.ws/blogs/Johnny77
http://www.avaxhome.ws/blogs/Johnny77
http://www.avaxhome.ws/blogs/Johnny77
INTRODUCTION 3-D scrollsawing was first introduced in the early 1990’s by Roy King and Scott Kochendorfer. Over the years it has proven to be a very popular form of scrollsaw art. Veining, along with a variety of different thicknesses of spacers behind the figures, give this unique form of scrollsawing it’s realistic appearance. The scenic masterpieces included in our special Wildlife Series 3-D pattern book are some of the best scrollsaw patterns available today. The natural beauty captured in each and every one of the 30 full-size designs will simply take your breath away. But please be forewarned - these projects are destined to become treasured family heirlooms for generations to come. And you may find yourself having to make more than 1 for each member of your family!
SCROLLSAW TIPS & TECHNIQUES The following scrollsaw tips and techniques are intended to get you started and on your way to scrollsaw success. Not only will you find these techniques helpful in completing the projects in this book, you will also find that they can be applied to many other scrollsaw projects as well.
PATTERN COPYING The patterns contained in this pattern book are intended to be your master patterns. We recommend making photo/xerox copies of the project pieces and then using a repositionable spray adhesive to adhere them to your work piece. Please be aware that some copy machines may cause a slight distortion in size. This is more likely to occur on very large patterns. We highly recommend copying your patterns and using a repositionable spray adhesive to adhere them to your work piece, rather than tracing. It is easier, less time consuming, and far more accurate!
REPOSITIONABLE SPRAY ADHESIVE Using a repositionable spray adhesive is the easiest and quickest way to transfer a pattern to your work piece after photo copying it. In a well ventilated area, lightly spray the backside of the paper pattern. Allow it to dry only until tacky - approximately 20 - 30 seconds. Then apply it to the work piece, smoothing any wrinkles if necessary. Two common problems that sometimes occur when using repositionable spray adhesive for the first time is applying the right amount onto the back of the pattern. Spraying too little may result in the pattern lifting off of the project before you have finished cutting. If this occurs, clear scotch tape can be used to secure the pattern back into position. On the other hand, spraying too much will make it difficult to remove the pattern, If this occurs, simply use a hand held hair dryer to heat the glue, which will loosen the pattern allowing it to be easily removed.
HARDWOODS VS PLYWOODS Selecting the type of material you will use is very important for the final outcome of your project. All of the projects in this pattern book have been designed so that hardwoods, plywoods, or a combination can be used to create your work of art. Hardwoods have their advantages as well as their disadvantages. They come in a variety of species, colors and grain patterns, yet they are more time consuming requiring more sanding, are more likely to warp and are more expensive to use. Plywoods, on the other hand, are less expensive, require less sanding, and come in a variety of standard thicknesses. They also are less likely to develop cracks or warp. We do, however, recommend that you use a top grade plywood without voids, such as the Baltic and Finnish birches. If you are unable to purchase these plywoods from a local source, please contact The Berry Basket at 1-800-206-9009 for pricing.
BLADE SELECTION There are many opinions pertaining to which blade to use with which type and thickness of material, as well as, with how intricate the design in the project is. The more time you put into scrolling, the more your choice of which blade to use will become personal preference. For the beginning scroller we make the following recommendations to get you started:
Material Thickness Blade Size Recommended 1/16” - 1/4” #2/0 or #2 1/4” - 1/2” #5 or #7 1/2” - 3/4” or thicker #7 or #9
We highly recommend using Great American Scrollsaw Blades for their high quality and unequalled performance. Several options in teeth configuration are available for cutting in various types and thicknesses of material. Ask for them at your local woodworking supply store or contact The Berry Basket at 1-800-206-9009.
http://www.avaxhome.ws/blogs/Johnny77
AUXILIARY TABLE Most scrollsaws on the market today have an opening in the table around the blade that is much larger than what you really need. This often causes small and delicate fretwork to break off on the downward stroke of the blade. An easy solution is to add a wooden auxiliary table to the top of the metal table on saw. To make an auxiliary table, choose a piece of 1/4” - 3/8” plywood similar to the size of your current saw’s table. If you choose, you can cut this plywood to the same shape as the metal table on your saw, or any shape or size you prefer. However, we do recommend that you make the table larger than what you think you will need for the size of the projects you will make in the future. Next, set the auxiliary table on top of the metal table. From the underside of the metal table, use a pencil to mark the location where the blade will feed through. Then turn the auxiliary table over and drill a 1/16” - 1/8” diameter hole, or slightly larger than the blade you will be using. Finally, apply a couple of strips of double-sided carpet tape to the metal table on each side of the blade. Then, firmly press the auxiliary table onto the double-sided carpet tape, making sure that the blade is centered in the hole.
SANDING For most projects, it is best to sand the work piece prior to applying the paper pattern and cutting the design. Once you’ve cut the design, and removed the paper pattern, it may be necessary to lightly sand any glue residue remaining, along with any “fuzz” on the bottom side.
DRILLING STARTER HOLES When drilling starter holes it is best to drill close to a corner, rather than in the middle of the waste areas, as it will take less time for the blade to reach the pattern line.
STACK CUTTING Stack cutting is fairly simple to do and can save you a lot of time when you have 2 or more identical pieces to cut for a project. If you are fairly new to scrollsawing and stack cutting, we recommend cutting no more than a total thickness of 1/2” for best results. On projects with fairly simple shapes to cut out, 2 or 3 layers could be held together by double-sided tape, or by using spray glue on paper to sandwich between the work pieces. On more intricate projects we suggest using #18 wire nails or brads slightly longer than the total thickness of the stack you are cutting. Tack the nails into the waste areas you will cut out, along with a few around the outside of the project. If the nail has gone through the bottom of the work piece, use a hammer to tap it flush, or use coarse sandpaper to sand the points flush with the bottom of the work piece. If you are stack cutting hardwoods, do not tack the nail too close to the pattern line or it may cause the wood to split. Another option would be to predrill for the nails with a slightly smaller drill bit so the nail will fit snugly and hold the layers together securely.
SAWING THIN WOODS
Occasionally you may find it difficult to control your workpiece when cutting in thin hardwoods or plywoods. The following suggestions should help to eliminate or reduce this problem. 1. If you have a variable speed saw, reduce the speed to 1/2 to 3/4 of high speed.
http://www.avaxhome.ws/blogs/Johnny77
2. If you do not have a variable speed saw, it will help to stack cut 2 or more layers of your material to keep better control of the workpiece. 3. For cutting any thickness of material it is very beneficial to keep at least one hand, if not both, partially touching the table with your fingers for better control. 4. Using a smaller blade with more teeth per inch helps to slow down how fast the blade is cutting. But keep in mind that if the blade is leaving burn marks that you will need to slow the speed down or use a blade with less teeth per inch.
VEINING Veining is a simple technique that will bring a life-like appearance to your project. The veins of a leaf or the folds of clothing will look more realistic when this technique is incorporated. To vein, simply saw all solid black lines as indicated on the pattern. Some areas of the pattern you will be able to vein by sawing inward from the outside edge, while in other areas you will need to drill a tiny starter hole for the blade.
FINISHING TECHNIQUES
Finishing of the 3-D projects can be done prior to, or after, assembling. If finished prior to assembling, you have more options for using contrasting stains. If you’ve made your project from hardwood, we recommend dipping your project in a dishpan type container that contains a penetrating oil such as Watco, Tung, or others. After dipping, allow the excess oil to drain back into the pan and then follow the manufacturer’s instructions. If you have chosen to use plywood, such as a Baltic birch, we recommend using two slightly different shades of stain in order to give an appealing contrast to the finished project! A final finish step we highly recommend is to use a clear varathane type spray for a protective coating.
ASSEMBLING
Assemble by first attaching the 6 spacer Blocks to the back of the Frame with glue, super glue or silicone. Center the Frame over the Back and glue the Spacer Blocks into position on the Back. Attach the Spacers where indicated on the back of the Figures. Position the Figures approximately as shown in the diagram and secure into place. Note: If you are attaching a banner to the Frame, we recommend first gluing a contrasting paper behind the lettering before you glue the banner in place. Frame Frame
Figures
Back Back
= Indicates placement of spacers
OPTIONS
Several options can help you customize your scenic 3-D project to your own satisfaction. If you have chosen plywood for parts of your project, veneers are an option that can add beautiful contrasts. When gluing veneers to your work pieces, it is important to glue the veneer to both sides of your material. This will help prevent the plywood from warping or cupping. All of the Frames and Figures designed in this book are interchangeable with each other. This will allow you to be creative and customize your own scenic wilderness masterpiece. Another option that will offer variety, is to enlarge or reduce the projects. This will allow for a decorative grouping that will be the envy of all! Try making one full-size, and then a couple at 50% - 75% for a striking display. Remember to enlarge/reduce the Frame/Back and Figures by the same percentages.
http://www.avaxhome.ws/blogs/Johnny77
T
Stoop B O ck a for ption : 1/8 nne A M : cu ” - r ER t on 1/4” IC da A o sh nly ed l ine .
Stock: 1/16” - 1/8”
r ne an ” B 1/4 m ”to 1/8 ot : B tock S
Sun
Duck Stock: 1/16” - 1/8” Spacers: 1/8”, cut 2
Large Cloud Stock: 1/16” - 1/8” Spacer: 1/8”, cut 1
Dashed line indicates Sun placement.
Left Cattails Stock: 1/16” - 1/8”
Attach to backside of Frame on dashed line.
es ne lin an ed s B sh ate Da ic d in ides S
r
http://www.avaxhome.ws/blogs/Johnny77
Forest Stock: 1/16” - 1/8” Spacers: 1/8”, cut 3
s ide
S ” ner - 1/4 Bank: 1/8” Stoc 4 cut
Stock: 1/16” - 1/8” Spacers: 1/2” or 5/8”, cut 2
Stock: 1/16” - 1/8” Spacers: 1/8”, cut 2
Stock: 1/16” - 1/8” Spacers:
Mountain
Eagle
Right Cattails
Clouds Stock: 1/16” - 1/8”
http://www.avaxhome.ws/blogs/Johnny77
Frame & Back Stock: 1/8” - 1/4”, cut 1 each Left side
Tree Stock: 1/16” - 1/8” spacers: 1/8”, cut 2
http://www.avaxhome.ws/blogs/Johnny77
Pattern overlap line Attach to backside of Frame on dashed line.
Stock: 1/16” - 1/8”
Grass
Stock: 1/16” - 1/8”
Meadow
3/8” Frame spacer location
Cut 6 spacer blocks from 3/8” thick material to separate Frame from Back.
Right side
Pattern overlap line
Cut on dashed line for Back
Cut on solid line for Frame only.
Bear Stock: 1/16” - 1/8” Spacers: 3/8”, cut 3
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Cloud Stock: 1/16” - 1/8”
Left Duck
B
St an cu ock: ner t4 1 /8” Sid -1 e /4”
Stock: 1/16” - 1/8” Spacers: 1/8”, cut 2
Left Grass Stock: 1/16” - 1/8” Spacer: 1/8”, cut 1
Bo
S t t t o ck: om 1 B
Stock: 1/8” - 1/4”
Top Banner
S
S p Sp toc las ac k: h er 1/1 s: 6 1/ ” 8” 1 , c /8 ut ” 2
/8” an 1/4 ner ”
Left Cattails Stock: 1/16” - 1/8”
Attach to backside of the Frame on dashed line.
http://www.avaxhome.ws/blogs/Johnny77
Right Grass Stock: 1/16” - 1/8” Spacer: 1/8”, cut 1
Mountain
Stock: 1/16” - 1/8”
Right Duck Stock: 1/16” - 1/8” Spacers: 1/8”, cut 2
Fish Stock: 1/16” - 1/8” Spacers: 3/8”, cut 3
Forest Stock: 1/16” - 1/8” Spacers: 1/8”, cut 2
http://www.avaxhome.ws/blogs/Johnny77
Frame & Back Stock: 1/8” - 1/4”, cut 1 each Left side
Pattern overlap line
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Cut 6 spacer blocks from 3/8” thick material to separate Frame from Back. Right side
Pattern overlap line
Cut on dashed line for Back
Cut on solid line for Frame only.
Right Cattails Stock: 1/16” - 1/8”
Attach to backside of the Frame on dashed line. 3/8” Frame spacer location
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Large Duck
Stock: 1/16 - 1/8”
Left Cattail
Stock: 1/16 - 1/8”
Stock: 1/16 - 1/8” Spacers:1/8”, cut 2
Mountains
Waves
Stock: 1/16 - 1/8” Spacers: 3/8”, cut 2
Water Stock: 1/16 - 1/8” Spacers: 1/8’, cut 2
Front Cattails Stock: 1/16 - 1/8”
Small Duck Stock: 1/16 - 1/8” Spacer: 1/4”, cut 1
http://www.avaxhome.ws/blogs/Johnny77
Attach to backside of the Frame on dashed line.
Right Cattail Stock: 1/16 - 1/8” Spacers: 1/8”, cut 2
Fish Stock: 1/16 - 1/8” Spacers: 1/4”, cut 2
Top Overlay Stock: 1/16 - 1/8”
Bottom Overlay Stock: 1/16 - 1/8”
http://www.avaxhome.ws/blogs/Johnny77
http://www.avaxhome.ws/blogs/Johnny77
Cut 6 spacer blocks from 3/8” thick material to separate Frame from Back.
Cut on dashed line for Back
Stock: 1/8” - 1/4”, cut 1 each Top
Frame & Back
Pattern overlap line
Cut on solid line for Frame only.
3/8” Frame spacer location
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
3/8” Frame spacer location
Bottom
Pattern overlap line
Top Cloud Stock: 1/16 - 1/8” Spacers: 1/8”, cut 2
Left Duck Stock: 1/16 - 1/8” Spacers: 1/8”, cut 2
Front Duck Stock: 1/16 - 1/8”
Stock: 1/16 - 1/8” Spacers: 1/4”, cut 2
Bottom Cloud Hills
Stock: 1/16 - 1/8”
Front Cattails Stock: 1/16 - 1/8”
Back Cattails Stock: 1/16 - 1/8” cut 2 Attach to backside of the Frame on dashed line.
Left Water Stock: 1/16 - 1/8” Spacer: 1/8”, cut 1
Right Water Stock: 1/16 - 1/8” Spacer: 1/8”, cut 1
http://www.avaxhome.ws/blogs/Johnny77
Stock: 1/16 - 1/8”
Right Duck
Fish Stock: 1/16 - 1/8” Spacers: 3/8”, cut 2
Fisherman Stock: 1/16 - 1/8” Spacers: 1/8”, cut 4
http://www.avaxhome.ws/blogs/Johnny77
Frame & Back Stock: 1/8” - 1/4”, cut 1 each Left side
Pattern overlap line
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Cut 6 spacer blocks from 3/8” thick material to separate Frame from Back.
Pattern overlap line
Right side
Cut on dashed line for Back
Cut on solid line for Frame only.
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Pheasant Stock: 1/16” - 1/8” Spacers: 3/8”, cut 3
Water Stock: 1/16” - 1/8” Spacers: 1/8”, cut 2
Left Tree Stock: 1/16” - 1/8” Spacers: 1/8”, cut 3
Left Grass Stock: 1/16” - 1/8”
Attach to backside of the Frame on dashed line.
Right Tree Right Grass Stock: 1/16” - 1/8”
Stock: 1/16” - 1/8” Spacers: 1/8”, cut 2
http://www.avaxhome.ws/blogs/Johnny77
Fish Stock: 1/16” - 1/8” Spacers: 1/4”, cut 2
Eagle Stock: 1/16” - 1/8” Spacers: 1/8”, cut 3
Leaf
Wave Stock: 1/16” - 1/8”
Stock: 1/16” - 1/8”, cut 4
Acorns/Leaves Stock: 1/16” - 1/8”
http://www.avaxhome.ws/blogs/Johnny77
http://www.avaxhome.ws/blogs/Johnny77
Cut 6 spacer blocks from 3/8” thick material to separate Frame from Back.
Stock: 1/8” - 1/4”, cut 1 each Top
Frame & Back
Cut on dashed line for Back
Pattern overlap line
Cut on solid line for Frame only.
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Bottom
3/8” Frame spacer location
Pattern overlap line
Eagle
Stock: 1/16” - 1/8” Spacers: 1/8”, cut 2
Grass Stock: 1/16” - 1/8”
Attach to backside of the Frame on dashed line.
http://www.avaxhome.ws/blogs/Johnny77
Stock: 1/16” - 1/8” Spacers: 1/4”, cut 3
Left Tree
Cougar
Stock: 1/16” - 1/8” Spacers: 1/8”, cut 3
Stoc
k
n nta1i6” - 1/8” u o / M :1
Right Trees Stock: 1/16” - 1/8” Spacers: 1/8”, cut 2
http://www.avaxhome.ws/blogs/Johnny77
Frame & Back Stock: 1/8” - 1/4”, cut 1 each Left side
Pattern overlap line
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Cut 6 spacer blocks from 3/8” thick material to separate Frame from Back.
Cut on dashed line for Back
Pattern overlap line
Right side
Cut on solid line for Frame only.
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
St
s 6” Hilolck: 1/1
1/8”
Log Stock: 1/16” - 1/8” Spacers: 1/4”, cut 3
http://www.avaxhome.ws/blogs/Johnny77
Small Cloud Stock: 1/16” - 1/8”
Cloud Stock: 1/16” - 1/8” Spacers: 1/8”, cut 2
n 1/8” coo 3 ”c a 1 R : 1/ 6 ”, cut k 8 Stoc cers: 3/ a p S
http://www.avaxhome.ws/blogs/Johnny77
Frame & Back Stock: 1/8” - 1/4”, cut 1 each Left side
Pattern overlap line
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Cut 6 spacer blocks from 3/8” thick material to separate Frame from Back. Right side
Cut on dashed line for Back
Pattern overlap line
Cut on solid line for Frame only.
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Stock: 1/16” - 1/8” Spacer: 1/8”, cut 3
Mountain
Stock: 1/16” - 1/8” Spacer: 1/8”, cut 2
Bottom Banner
Stock: 1/16” - 1/4”
Sun Stock: 1/16” - 1/8”
http://www.avaxhome.ws/blogs/Johnny77
Hills
Stock: 1/16” - 1/8” Spacers: 1/4”, cut 3
Left Tree
Stock: 1/16” - 1/8” Stock: 3/8”, cut 2
http://www.avaxhome.ws/blogs/Johnny77
Stock: 1/16” - 1/8”, cut 2
Top Banner Stock: 1/16” - 1/8” cut 1
Stock: 1/16” - 1/4”
Top Banner
Banner Side Dashed line indicates placement of banner side.
Deer
Frame & Back Pattern overlap line
Stock: 1/8” - 1/4”, cut 1 each Left side
3/8” Frame spacer location
Bottom Right Trees Stock: 1/16” - 1/8”
Attach to backside of Frame on dashed line.
Attach to backside of Frame on dashed line. Stock: 1/16” - 1/8”
Bottom Left Trees http://www.avaxhome.ws/blogs/Johnny77
Cut 6 spacer blocks from 3/8” thick material to separate Frame from Back. Right side
Grass
Stock: 1/16 - 1/8” Spacers: 1/4’, cut 2
Pattern overlap line
Cut on dashed line for Back
Cut on solid line for Frame only.
Right Trees Stock: 1/16” - 1/8” Spacer: 1/8”, cut 2
3/8” Frame spacer location
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Left Eagle Stock: 1/16” - 1/8” Spacers: 1/8”, cut 2
Left Back Trees
Small Mountain
Stock: 1/16” - 1/8”
Stock: 1/16” - 1/8”
Front Cloud Stock: 1/16” - 1/8” Spacer: 1/8”, cut 1
Back Cloud Stock: 1/16” - 1/8”
Overlay Stock: 1/16” - 1/8”
Deer Stock: 1/16” - 1/8” Spacers: 1/4”, cut 3
Left Front Tree Stock: 1/16” - 1/8” Spacers: 1/8”, cut 3
Attach to backside of the Frame on dashed line.
Front Grass Stock: 1/16” - 1/8”
http://www.avaxhome.ws/blogs/Johnny77
Stock: 1/16” - 1/8”
Right Mountain
Right Eagle
Stock: 1/16” - 1/8” Spacers: 1/8”, cut 3
Back Grass
Stock: 1/16” - 1/8”
Right Back Tree Stock: 1/16” - 1/8” Spacers: 1/8”, cut 2
Right Trees Stock: 1/16” - 1/8” Spacers: 1/8”, cut 3
http://www.avaxhome.ws/blogs/Johnny77
Frame & Back Stock: 1/8” - 1/4”, cut 1 each Left side
Pattern overlap line
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Cut 6 spacer blocks from 3/8” thick material to separate Frame from Back.
Pattern overlap line
Right side
Cut on dashed line for Back
Cut on solid line for Frame only.
3/8” Frame spacer location
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Mountains Stock: 1/16” - 1/8”
Sun Stock: 1/16” - 1/8”
Cloud Stock: 1/16” - 1/8” Spacer: 1/8”, cut 1
Brush Stock: 1/16” - 1/8”
Deer Stock: 1/16” - 1/8” Spacer: 1/4”, cut 3
http://www.avaxhome.ws/blogs/Johnny77
Duck Stock: 1/16” - 1/8” Spacer: 1/8”, cut 2
Grass Stock: 1/16” - 1/8”
Side Grass
Attach to backside of the Frame on dashed line.
Stock: 1/16” - 1/8” Spacer: 1/8”, cut 1
Spacer locations
Eagle Stock: 1/16” - 1/8” Spacer: 1/8”, cut 3
http://www.avaxhome.ws/blogs/Johnny77
http://www.avaxhome.ws/blogs/Johnny77
Cut 6 spacer blocks from 3/8” thick material to separate Frame from Back.
Cut on dashed line for Back
Pattern overlap line
Stock: 1/8” - 1/4”, cut 1 each Top
Frame & Back
Cut on solid line for Frame only.
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Bottom
3/8” Frame spacer location
Pattern overlap line
8” Log : 1/16 - 1/cut 2 Stockers: 1/8”, Spac
Sto
” ss - 1/8 Grack: 1/16
side back ch to n Atta rame o . of F hed line das
” - 1/8 3 s Hill k: 1/16 8”, cut Stoc cers: 1/ Spa
Sun
Stock: 1/16 - 1/8”
Small Cloud
Stock: 1/16 - 1/8”
http://www.avaxhome.ws/blogs/Johnny77
Smallest Cloud Stock: 1/16 - 1/8”
Large Cloud Stock: 1/16 - 1/8” Spacer: 1/8”, cut 1
Medium Cloud Stock: 1/16 - 1/8” Spacer: 1/8”, cut 1
Deer Stock: 1/16 - 1/8” Spacers: 3/8”, cut 3
http://www.avaxhome.ws/blogs/Johnny77
Frame & Back Stock: 1/8” - 1/4”, cut 1 each Left side
Pattern overlap line
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Right side
Cut on dashed line for Back
Pattern overlap line
Cut 6 spacer blocks from 3/8” thick material to separate Frame from Back.
Cut on solid line for Frame only.
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Stock: 1/16” - 1/8” Spacers: 1/4”, cut 2
Deer
Stock: 1/16” - 1/8” Options: mountains can be cut in one piece or separately.
Mountains
Cloud Stock: 1/16” - 1/8” Spacer: 1/8”, cut 1
Left Meadow Stock: 1/16” - 1/8” Spacers: 1/8”, cut 2
http://www.avaxhome.ws/blogs/Johnny77
Right Meadow Stock: 1/16” - 1/8” Spacers: 1/8”, cut 4
Medium Tree Stock: 1/16” - 1/8”
Small Tree Stock: 1/16” - 1/8”
Left Large Trees Stock: 1/16” - 1/8”, cut 2
Right Large Tree Stock: 1/16” - 1/8”
Grass Stock: 1/16” - 1/8”
Attach to backside of the Frame on dashed line.
http://www.avaxhome.ws/blogs/Johnny77
Frame & Back Stock: 1/8” - 1/4”, cut 1 each Left side
Pattern overlap line
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Cut 6 spacer blocks from 3/8” thick material to separate Frame from Back.
Right side Cut on dashed line for Back
Pattern overlap line
Cut on solid line for Frame only.
3/8” Frame spacer location
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Cloud Stock: 1/16” - 1/8”
Left Tree Stock: 1/16” - 1/8”
Left Deer
Mountain
Log Stock: 1/16” - 1/8” Spacers: 1/8”, cut 2
Left Grass Stock: 1/16” - 1/8”
Left Stump Stock: 1/16” - 1/8”
http://www.avaxhome.ws/blogs/Johnny77
Stock: 1/16” - 1/8”
Stock: 1/16” - 1/8” Spacers: 1/4”, cut 2
Overlay Stock: 1/16” - 1/8”
Right Tree Stock: 1/16” - 1/8” Spacers: 1/8”, cut 2
Back Grass
Right Deer
Stock: 1/16” - 1/8”
Stock: 1/16” - 1/8” Spacers: 3/8”, cut 2
Center Grass Stock: 1/16” - 1/8”
Right Stump Stock: 1/16” - 1/8”
http://www.avaxhome.ws/blogs/Johnny77
Frame & Back Stock: 1/8” - 1/4”, cut 1 each Left side
Pattern overlap line
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Cut 6 spacer blocks from 3/8” thick material to separate Frame from Back. Right side
Pattern overlap line
Cut on dashed line for Back
Cut on solid line for Frame only.
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Cloud Stock: 1/16” - 1/8” Spacer: 1/8”, cut 1
Back Mountain Stock: 1/16” - 1/8”
Mountain Stock: 1/16” - 1/8”
Leaf Stock: 1/16” - 1/8”, cut 4
Stump Stock: 1/16” - 1/8” Spacer: 1/8”, cut 1
Trees Stock: 1/16” - 1/8” Spacers: 1/8”, cut 4
http://www.avaxhome.ws/blogs/Johnny77
Elk Stock: 1/16” - 1/8” Spacers: 3/8”, cut 3
Meadow Stock: 1/16” - 1/8”
Grass
Attach to backside of the Frame on dashed line.
Stock: 1/16” - 1/8”
http://www.avaxhome.ws/blogs/Johnny77
http://www.avaxhome.ws/blogs/Johnny77
Cut 6 spacer blocks from 3/8” thick material to separate Frame from Back.
Stock: 1/8” - 1/4”, cut 1 each Top
Frame & Back
Cut on dashed line for Back
Pattern overlap line
Cut on solid line for Frame only.
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Bottom
3/8” Frame spacer location
Pattern overlap line
Mountain Stock: 1/16” - 1/8”
Left Elk
Left Tree Stock: 1/16” - 1/8” Spacers: 1/8”, cut 3
Squirrel Stock: 1/16” - 1/8” Spacers: 1/8”, cut 3
Eagle Stock: 1/16” - 1/8” Spacers: 1/8”, cut 3
http://www.avaxhome.ws/blogs/Johnny77
Stock: 1/16” - 1/8”
Back Mountain
Stock: 1/16” - 1/8” Spacers: 1/4”, cut 3
Log
Stock: 1/16” - 1/8” Spacers: 1/8”, cut 3
Attach to backside of the Frame on dashed line.
Right Elk Stock: 1/16” - 1/8” Spacers: 1/4”, cut 3
Tree Stock: 1/16” - 1/8” Spacers: 1/8”, cut 3
Grass
Stock: 1/16” - 1/8”
Grass Stock: 1/16” - 1/8” Glue to Right Elk
http://www.avaxhome.ws/blogs/Johnny77
Frame & Back Stock: 1/8” - 1/4”, cut 1 each Left side
Pattern overlap line
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Cut on dashed line for Back Cut 6 spacer blocks from 3/8” thick material to separate Frame from Back.
Right side
Pattern overlap line
Cut on solid line for Frame only.
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Mountain Stock: 1/16” - 1/8
Elk Stock: 1/16” - 1/8” Spacers: 1/4”, cut 3
http://www.avaxhome.ws/blogs/Johnny77
Right Tree Stock: 1/16” - 1/8” Spacers: 1/8”, cut 3
Left Tree Stock: 1/16” - 1/8” Spacers: 1/8”, cut 3
Attach to backside of the Frame on dashed line.
Grass Stock: 1/16” - 1/8”
http://www.avaxhome.ws/blogs/Johnny77
http://www.avaxhome.ws/blogs/Johnny77
Cut 6 spacer blocks from 3/8” thick material to separate Frame from Back.
Stock: 1/8” - 1/4”, cut 1 each Top
Frame & Back
Cut on dashed line for Back
Pattern overlap line
Cut on solid line for Frame only.
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Bottom
3/8” Frame spacer location
Pattern overlap line
Leaves Leaf
Stock: 1/16” - 1/8”, cut 2
Stock: 1/16” - 1/8”, cut 2
Mountain Stock: 1/16” - 1/8”
Caribou Stock: 1/16” - 1/8” Spacers: 1/4’, cut 3
Meadow Stock: 1/16” - 1/8”
http://www.avaxhome.ws/blogs/Johnny77
Right Forest Grass
Attach to backside of the Frame on dashed line.
Stock: 1/16” - 1/8”
Stock: 1/16” - 1/8” Spacers: 1/8”, cut 2
Small Mountain Stock: 1/16” - 1/8”
Left Forest Stock: 1/16” - 1/8” Spacers: 1/8”, cut 2
http://www.avaxhome.ws/blogs/Johnny77
Frame & Back Stock: 1/8” - 1/4”, cut 1 each Left side
Pattern overlap line
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Cut on dashed line for Back Right side
Pattern overlap line
Cut 6 spacer blocks from 3/8” thick material to separate Frame from Back.
Cut on solid line for Frame only.
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Spacer locations
Moose
http://www.avaxhome.ws/blogs/Johnny77
Stock: 1/16” - 1/8”
Mountains
Stock: 1/16” - 1/8” Spacer: 1/4”, cut 3
Grass Stock: 1/16” - 1/8”
Forest
Spacer locations
Stock: 1/16” - 1/8” Spacer: 1/8”, cut 1
Right Trees Stock: 1/16” - 1/8” Spacer: 1/8”, cut 2
http://www.avaxhome.ws/blogs/Johnny77
Frame & Back Stock: 1/8” - 1/4”, cut 1 each Left side
Pattern overlap line
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Cut 6 spacer blocks from 3/8” thick material to separate Frame from Back.
Pattern overlap line
Right side
Cut on dashed line for Back
Cut on solid line for Frame only.
3/8” Frame spacer location
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Left Cloud Stock: 1/16” - 1/8”
Mt. Sheep Stock: 1/16” - 1/8” Spacers: 3/8”, cut 3
Left Hills Stock: 1/16” - 1/8” Spacers: 1/8”, cut 2
Small Mt. Sheep Stock: 1/16” - 1/8” Spacers: 1/4”, cut 2
Grass Stock: 1/16” - 1/8” Spacers: 1/8’, cut 2
http://www.avaxhome.ws/blogs/Johnny77
Right Cloud Stock: 1/16” - 1/8” Spacers: 1/8”, cut 2
Mountain Stock: 1/16” - 1/8” Spacers: 1/8”, cut 3
Moon / Sun Stock: 1/16” - 1/8”
http://www.avaxhome.ws/blogs/Johnny77
Frame & Back Stock: 1/8” - 1/4”, cut 1 each Left Side
Pattern overlap line
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Cut 6 spacer blocks from 3/8” thick material to separate Frame from Back. Right Side
Cut on dashed line for Back
Pattern overlap line
Cut on solid line for Frame only.
3/8” Frame spacer location
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Large Cloud Stock: 1/16” - 1/8” Spacers: 1/4”, cut 2
Small Cloud Stock: 1/16” - 1/8” Spacers: 1/8”, cut 2
Left Hills Stock: 1/16” - 1/8” Spacer: 1/8”, cut 2
Mt. Goat Stock: 1/16” - 1/8” Spacers: 3/8”, cut 3
http://www.avaxhome.ws/blogs/Johnny77
Mountains Stock: 1/16” - 1/8”
Right Hills Stock: 1/16” - 1/8” Spacers: 1/8”, cut 2
Rock Ledge Stock: 1/16” - 1/8” Spacer: 1/4”, cut 2
http://www.avaxhome.ws/blogs/Johnny77
Frame & Back Stock: 1/8” - 1/4”, cut 1 each Left side
Pattern overlap line
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Cut 6 spacer blocks from 3/8” thick material to separate Frame from Back. Right side
Pattern overlap line
Cut on dashed line for Back
Cut on solid line for Frame only.
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
/8” Sto oun ck: t a 1/1 in 6” -1
Clouds
M
Stock: 1/16” - 1/8”, cut 1 each Spacer: 1/8”, cut 1 where indicated.
Right Trees Stock: 1/16” - 1/8”
Center Trees Stock: 1/16” - 1/8”
Attach to backside of the Frame on dashed line.
Attach to backside of the Frame on dashed line.
http://www.avaxhome.ws/blogs/Johnny77
Left Trees Stock: 1/16” - 1/8”
Ea
Sto gle Spa ck: 1/1 cers 6” : 3/8 1/8 ”, c ” ut 3
Attach to backside of the Frame on dashed line.
http://www.avaxhome.ws/blogs/Johnny77
Frame & Back Stock: 1/8” - 1/4”, cut 1 each Left side
Pattern overlap line
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Cut 6 spacer blocks from 3/8” thick material to separate Frame from Back. Right side
Pattern overlap line
Cut on dashed line for Back
Cut on solid line for Frame only.
3/8” Frame spacer location
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Cloud Stock: 1/16” - 1/8” Spacer: 1/8”, cut 1
Mountain Stock: 1/16” - 1/8” Spacers: 1/8”, cut 2
Eagle Stock: 1/16” - 1/8” Spacers: 3/8”, cut 3
http://www.avaxhome.ws/blogs/Johnny77
Sun Stock: 1/16” - 1/8”
Smallest Tree Stock: 1/16” - 1/8”
Attach to backside of the Frame on dashed line.
Right Large Tree Attach to backside of the Frame on dashed line.
Stock: 1/16” - 1/8”
Small Tree Stock: 1/16” - 1/8”
Left Large Tree Stock: 1/16” - 1/8”
http://www.avaxhome.ws/blogs/Johnny77
Frame & Back Stock: 1/8” - 1/4”, cut 1 each Left side
Pattern overlap line
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Cut 6 spacer blocks from 3/8” thick material to separate Frame from Back. Right side
Pattern overlap line
Cut on dashed line for Back
Cut on solid line for Frame only.
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Hound Stock: 1/16” - 1/8” Spacers: 1/8”, cut 2
Right Grass Stock: 1/16” - 1/8” Spacers: 1/8”, cut 3
Left Trees Stock: 1/16” - 1/8” Spacers: 1/8”, cut 2
Trees
Stock: 1/16” - 1/8” Option: cut in one piece
Mountains
Stock: 1/16” - 1/8” Spacers: 1/8”, cut 3
Log Stock: 1/16” - 1/8” Spacers: 1/4”, cut 2
Front Grass Stock: 1/16” - 1/8” Attach to backside of the Frame on dashed line.
http://www.avaxhome.ws/blogs/Johnny77
Hills Stock: 1/16” - 1/8” Spacers: 1/8”, cut 2
Overlay Stock: 1/16” - 1/8”, cut 2 Spacers: 1/8”, cut 3
Hunter Stock: 1/16” - 1/8” Spacers: 1/8”, cut 4
Pheasant Stock: 1/16” - 1/8” Spacers: 3/8”, cut 3
http://www.avaxhome.ws/blogs/Johnny77
Frame & Back Stock: 1/8” - 1/4”, cut 1 each Left side
Pattern overlap line
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Cut 6 spacer blocks from 3/8” thick material to separate Frame from Back.
Pattern overlap line
Right side
Cut on dashed line for Back
Cut on solid line for Frame only.
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Leaves Stock: 1/16” - 1/8”, cut 2
Right Tree Stock: 1/16” - 1/8” Spacers: 1/8”, cut 3
Left Tree Stock: 1/16” - 1/8” Spacers: 1/8”, cut 3
Mountain Stock: 1/16” - 1/8”
Small Mountain Stock: 1/16” - 1/8”
Grass Stock: 1/16” - 1/8”
Attach to backside of Frame on dashed line.
http://www.avaxhome.ws/blogs/Johnny77
Tree Stock: 1/16” - 1/8” Spacers: 1/8”, cut 3
Dog Stock: 1/16” - 1/8” Spacers: 1/8”, cut 3
Pheasant Stock: 1/16” - 1/8” Spacers: 3/8”, cut 3
http://www.avaxhome.ws/blogs/Johnny77
Frame & Back Stock: 1/8” - 1/4”, cut 1 each Left side
Pattern overlap line
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Cut 6 spacer blocks from 3/8” thick material to separate Frame from Back. Cut on dashed line for Back
Pattern overlap line
Right side
Cut on solid line for Frame only.
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
M
Sto ou ck nta : 1 in /16 ”1/8 ”
Small Quail Stock: 1/16” - 1/8” Spacers: 1/8”, cut 2
Quail Stock: 1/16” - 1/8” Spacers: 1/4’, cut 3
Grass Stock: 1/16” - 1/8”
Attach to backside of the Frame on dashed line.
http://www.avaxhome.ws/blogs/Johnny77
Small Meadow Stock: 1/16” - 1/8”
Trees Stock: 1/16” - 1/8”
Log Stock: 1/16” - 1/8” Spacers: 1/8”, cut 2
Meadow Stock: 1/16” - 1/8”
http://www.avaxhome.ws/blogs/Johnny77
Frame & Back Stock: 1/8” - 1/4”, cut 1 each Left side
Pattern overlap line
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Cut 6 spacer blocks from 3/8” thick material to separate Frame from Back.
Right side
Pattern overlap line
Cut on dashed line for Back
Cut on solid line for Frame only.
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Hound Stock: 1/16” - 1/8” Spacers: 1/8”, cut 3
Leaves Stock: 1/16” - 1/8”, cut 2 Spacers: 1/8”, cut 3
Left Mountain Stock: 1/16” - 1/8”
Cattails Stock: 1/16” - 1/8”
Attach to backside of the Frame on dashed line.
http://www.avaxhome.ws/blogs/Johnny77
Clouds Stock: 1/16” - 1/8”, cut 1 each Spacers: 1/8”, cut 2 for where indicated.
Right Mountains Stock: 1/16” - 1/8”
Forest Stock: 1/16” - 1/8” Spacers: 1/8”, cut 2
Duck Stock: 1/16” - 1/8” Spacers: 1/2”, cut 3
Tree Stock: 1/16” - 1/8” Spacers: 1/8”, cut 3
http://www.avaxhome.ws/blogs/Johnny77
Frame & Back Stock: 1/8” - 1/4”, cut 1 each Left side
Pattern overlap line
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Cut on dashed line for Back
Cut 6 spacer blocks from 3/8” thick material to separate Frame from Back.
Pattern overlap line
Right side
Cut on solid line for Frame only.
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Small Cloud Stock: 1/16 - 1/8”
Large Cloud Stock: 1/16 - 1/8” Spacers: 1/8”, cut 2
Overlay Hills
Stock: 1/16 - 1/8”
Stock: 1/16 - 1/8” cut 2
Back Grass Stock: 1/16 - 1/8” Spacers: 1/8”, cut 2
Fish Stock: 1/16 - 1/8” Spacer: 1/8”, cut 1
Water Stock: 1/16 - 1/8”
Right Duck Stock: 1/16 - 1/8” Spacers: 1/4”, cut 3
http://www.avaxhome.ws/blogs/Johnny77
Front Grass
Stock: 1/16 - 1/8”
Attach to backside of the Frame on dashed line.
Left Duck Stock: 1/16 - 1/8” Spacers: 1/4”, cut 2
Log Stock: 1/16 - 1/8” Spacers: 1/8”, cut 2
http://www.avaxhome.ws/blogs/Johnny77
Frame & Back Stock: 1/8” - 1/4”, cut 1 each Left side
Pattern overlap line
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Pattern overlap line
Cut 6 spacer blocks from 3/8” thick material to separate Frame from Back.
Right side
Cut on dashed line for Back
Cut on solid line for Frame only.
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Left Grass Stock: 1/16” - 1/8” Spacer: 1/8”, cut 1
Drake Stock: 1/16” - 1/8” Spacers: 3/8”, cut 3
Right Grass Stock: 1/16” - 1/8” Spacer: 1/8”, cut 1
Cattails Stock: 1/16” - 1/8”
Attach to backside of the Frame on dashed line.
http://www.avaxhome.ws/blogs/Johnny77
Right Tree
Stock: 1/16” - 1/8”
Meadow
Stock: 1/16” - 1/8”
Left Tree Stock: 1/16” - 1/8”
http://www.avaxhome.ws/blogs/Johnny77
http://www.avaxhome.ws/blogs/Johnny77 Pattern overlap line
Stock: 1/8” - 1/4”, cut 1 each Top
Frame & Back 3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
3/8” Frame spacer location
Cut on solid line for Frame only.
Pattern overlap line
Cut on dashed line for Back
Bottom
Cut 6 spacer blocks from 3/8” thick material to separate Frame from Back.
Large Cloud Stock: 1/16” - 1/8” Spacer: 1/8”, cut 2
Small Cloud Stock: 1/16” - 1/8”
Left Grass Stock: 1/16” - 1/8”
Small Bird Stock: 1/16” - 1/8” Spacer: 1/8”, cut 2
Spacer locations
Right Grass Stock: 1/16” - 1/8” Spacer: 1/4”, cut 2
Front Grass Stock: 1/16” - 1/8”
Attach to backside of Frame on dashed line.
http://www.avaxhome.ws/blogs/Johnny77
Spacer locations
Heron Stock: 1/16” - 1/8” Spacer: 3/8”, cut 3
http://www.avaxhome.ws/blogs/Johnny77
Frame & Back Stock: 1/8” - 1/4”, cut 1 each Left side
Pattern overlap line
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Cut 6 spacer blocks from 3/8” thick material to separate Frame from Back. Right side
Pattern overlap line
Cut on dashed line for Back
Cut on solid line for Frame only.
http://www.avaxhome.ws/blogs/Johnny77
Center Mountain Stock: 1/16” - 1/8”
Left Mountain
Stock: 1/16” - 1/8” Spacers: 1/8”, cut 3
Swan
Stock: 1/16” - 1/8”
Right Mountain Stock: 1/16” - 1/8”
Left Cloud Stock: 1/16” - 1/8” Spacer: 1/8”, cut 1
Right Cloud Stock: 1/16” - 1/8”
http://www.avaxhome.ws/blogs/Johnny77
St
/8”
-1 ter 16” Waock: 1/
Attach to backside of the Frame on dashed line.
Cattails
Stock: 1/16” - 1/8”
http://www.avaxhome.ws/blogs/Johnny77
Frame & Back Stock: 1/8” - 1/4”, cut 1 each Left side
Pattern overlap line
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
Cut 6 spacer blocks from 3/8” thick material to separate Frame from Back. Right side
Pattern overlap line
Cut on dashed line for Back
Cut on solid line for Frame only.
3/8” Frame spacer location
http://www.avaxhome.ws/blogs/Johnny77
http://www.avaxhome.ws/blogs/Johnny77
