Cancer Cell Culture: Methods and Protocols (Methods in Molecular Medicine)

M E T H O D S I N M O L E C U L A R M E D I C I N E TM Cancer Cell Culture Methods and Protocols Edited by Simon P. La...

Author: Simon P. Langdon

136 downloads 1210 Views 10MB Size Report

This content was uploaded by our users and we assume good faith they have the permission to share this book. If you own the copyright to this book and it is wrongfully on our website, we offer a simple DMCA procedure to remove your content from our site. Start by pressing the button below!
Report copyright / DMCA form

DOWNLOAD PDF

M E T H O D S I N M O L E C U L A R M E D I C I N E TM

Cancer Cell Culture Methods and Protocols Edited by

Simon P. Langdon

Cancer Cell Cuture

M E T H O D S I N M O L E C U L A R M E D I C I N E™

John M. Walker, SERIES EDITOR 97. Molecular Diagnosis of Cancer: Methods and Protocols, Second Edition, edited by Joseph E. Roulston and John M. S. Bartlett, 2004 96. Hepatitis B and D Protocols: Volume 2, Immunology, Model Systems, and Clinical Studies, edited by Robert K. Hamatake and Johnson Y. N. Lau, 2004 95. Hepatitis B and D Protocols: Volume 1, Detection, Genotypes, and Characterization, edited by Robert K. Hamatake and Johnson Y. N. Lau, 2004 94. Molecular Diagnosis of Infectious Diseases, Second Edition, edited by Jochen Decker and Udo Reischl, 2004 93. Anticoagulants, Antiplatelets, and Thrombolytics, edited by Shaker A. Mousa, 2004 92. Molecular Diagnosis of Genetic Diseases, Second Edition, edited by Rob Elles and Roger Mountford, 2003 91. Pediatric Hematology: Methods and Protocols, edited by Nicholas J. Goulden and Colin G. Steward, 2003 90. Suicide Gene Therapy: Methods and Reviews, edited by Caroline J. Springer, 2003 89. The Blood–Brain Barrier: Biology and Research Protocols, edited by Sukriti Nag, 2003 88. Cancer Cell Culture: Methods and Protocols, edited by Simon P. Langdon, 2003 87. Vaccine Protocols, Second Edition, edited by Andrew Robinson, Michael J. Hudson, and Martin P. Cranage, 2003 86. Renal Disease: Techniques and Protocols, edited by Michael S. Goligorsky, 2003 85. Novel Anticancer Drug Protocols, edited by John K. Buolamwini and Alex A. Adjei, 2003 84. Opioid Research: Methods and Protocols, edited by Zhizhong Z. Pan, 2003 83. Diabetes Mellitus: Methods and Protocols, edited by Sabire Özcan, 2003

82. Hemoglobin Disorders: Molecular Methods and Protocols, edited by Ronald L. Nagel, 2003 81. Prostate Cancer Methods and Protocols, edited by Pamela J. Russell, Paul Jackson, and Elizabeth A. Kingsley, 2003 80. Bone Research Protocols, edited by Miep H. Helfrich and Stuart H. Ralston, 2003 79. Drugs of Abuse: Neurological Reviews and Protocols, edited by John Q. Wang, 2003 78. Wound Healing: Methods and Protocols, edited by Luisa A. DiPietro and Aime L. Burns, 2003 77. Psychiatric Genetics: Methods and Reviews, edited by Marion Leboyer and Frank Bellivier, 2003 76. Viral Vectors for Gene Therapy: Methods and Protocols, edited by Curtis A. Machida, 2003 75. Lung Cancer: Volume 2, Diagnostic and Therapeutic Methods and Reviews, edited by Barbara Driscoll, 2003 74. Lung Cancer: Volume 1, Molecular Pathology Methods and Reviews, edited by Barbara Driscoll, 2003 73. E. coli: Shiga Toxin Methods and Protocols, edited by Dana Philpott and Frank Ebel, 2003 72. Malaria Methods and Protocols, edited by Denise L. Doolan, 2002 71. Haemophilus influenzae Protocols, edited by Mark A. Herbert, Derek Hood, and E. Richard Moxon, 2002 70. Cystic Fibrosis Methods and Protocols, edited by William R. Skach, 2002 69. Gene Therapy Protocols, Second Edition, edited by Jeffrey R. Morgan, 2002 68. Molecular Analysis of Cancer, edited by Jacqueline Boultwood and Carrie Fidler, 2002 67. Meningococcal Disease: Methods and Protocols, edited by Andrew J. Pollard and Martin C. J. Maiden, 2001

M E T H O D S I N M O L E C U L A R M E D I C I N E™

Cancer Cell Culture Methods and Protocols

Edited by

Simon P. Langdon Western General Hospital Edinburgh, UK

© 2004 Humana Press Inc. 999 Riverview Drive, Suite 208 Totowa, New Jersey 07512 www.humanapress.com All rights reserved. No part of this book may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, microfilming, recording, or otherwise without written permission from the Publisher. Methods in Molecular Medicine™ is a trademark of The Humana Press Inc. The content and opinions expressed in this book are the sole work of the authors and editors, who have warranted due diligence in the creation and issuance of their work. The publisher, editors, and authors are not responsible for errors or omissions or for any consequences arising from the information or opinions presented in this book and make no warranty, express or implied, with respect to its contents. This publication is printed on acid-free paper. ∞ ANSI Z39.48-1984 (American National Standards Institute) Permanence of Paper for Printed Library Materials. Cover design by Patricia F. Cleary. Cover illustrations: Phase contrast microscopy of SNU-482 renal cell carcinoma cell line (inset; Fig. 4B, Chapter 9, see discussion pp. 116, 118). Background: SNU-175 colorectal carcinoma cell line (Fig. 6, Chapter 6, see p. 88). For additional copies, pricing for bulk purchases, and/or information about other Humana titles, contact Humana at the above address or at any of the following numbers: Tel: 973-256-1699; Fax: 973-256-8341; E-mail: [email protected] or visit our website at http://humanapress.com. Photocopy Authorization Policy: Authorization to photocopy items for internal or personal use, or the internal or personal use of specific clients is granted by Humana Press, provided that the base fee of US $25.00 per copy is paid directly to the Copyright Clearance Center (CCC), 222 Rosewood Dr., Danvers MA 01923. For those organizations that have been granted a photocopy license from the CCC, a separate system of payment has been arranged and is acceptable to the Humana Press. The fee code for users of the Transactional Reporting Service is 1-58829079-4/04 $25.00. Printed in the United States of America. 10 9 8 7 6 5 4 3 2 1 ISSN 1543-1894 E-ISBN 1-59259-406-9 Library of Congress Cataloging-in-Publication Data Cancer cell culture : methods and protocols / edited by Simon P. Langdon. p. ; cm. -- (Methods in molecular medicine ; 88) Includes bibliographical references and index. ISBN 1-58829-079-4 (alk. paper) 1. Cancer cells--Laboratory manuals. I. Langdon, Simon P. II. Series. [DNLM: 1. Tumor Cells, Cultured--Laboratory Manuals. 2. Laboratory Techniques and Procedures--Laboratory Manuals. QZ 25 C215 2003] RC267.C336 2003 616.99'407--dc21 2003040675

Preface The culture of cancer cells is routinely practiced in many academic research centers, biotechnology companies, and hospital laboratories. Cancer Cell Culture: Methods and Protocols describes easy-to-follow methods to guide both novice and more experienced researchers seeking to use new techniques in their laboratories. Our present understanding of the cell and molecular biology of cancer has been derived mainly from the use of cultured cancer cells and we cover a number of the most widely used assays to study function in current use. Part I introduces the basic concept of cancer cell culture and this is followed by a description of the general techniques used in many cell culture facilities. The importance of cell line characterization is now widely recognized and methods to characterize and authenticate cell lines are described in Part II. Part III covers the isolation and development of specific cancer cell types and provides valuable tips for those wishing to derive new cell line models. A wide range of procedures encompassing many of the key functional features of cancer cells are described in Part IV including assays to evaluate clonogenicity, cell proliferation, apoptosis, adhesion, migration, invasion, senescence, angiogenesis, and cell cycle parameters. Methods to modify cancer cells are described in Part V, including protocols for transfection, development of drug-resistance, immortalization, and transfer in vivo. In Part VI methods of coculture of different cell types and contamination of cell lines are covered. Finally, in Part VII the impact of contamination is discussed and approaches to detect and eliminate this problem are described. I would like to express my gratitude to all the contributors of this volume and also to Professor John Walker for his help and guidance as series editor. Finally I would like to thank my wife Laura and daughter Sarah for their help and support during its preparation.

Simon P. Langdon

v

Contents Preface .............................................................................................................. v Contributors .....................................................................................................xi

PART I INTRODUCTION

TO

CANCER CELL CULTURE

1 Basic Principles of Cancer Cell Culture Simon P. Langdon ................................................................................. 3 2 Essential Techniques of Cancer Cell Culture Kenneth G. Macleod and Simon P. Langdon ...................................... 17

PART II CHARACTERIZATION

AND

AUTHENTICATION

3 Characterization and Authentication of Cancer Cell Lines: An Overview Simon P. Langdon ............................................................................... 33 4 Authentication of Cancer Cell Lines by DNA Fingerprinting Wilhelm G. Dirks and Hans G. Drexler ............................................. 43 5 Cytogenetic Characterization of Tumor Cell Lines Roderick A. F. MacLeod and Hans G. Drexler ................................... 57

PART III ISOLATION

AND

CULTURE

OF

SPECIALIZED CELL TYPES

6 Isolation and Culture of Colon Cancer Cell Lines Jae-Gahb Park, Ja-Lok Ku, and So-Yeon Park ..................................... 79 7 Isolation and Culture of Melanoma Cell Lines Adam I. Riker ...................................................................................... 93 8 Isolation and Culture of Human Brain Tumor Cells German G. Gomez and Carol A. Kruse ............................................ 101 9 Isolation and Culture of Renal Cancer Cell Lines Jae-Gahb Park, Ja-Lok Ku, and So-Yeon Park ................................... 111 10 Isolation and Culture of Prostate Cancer Cell Lines Nora M. Navone, Matilde Olive, and Patricia Troncoso ................. 121 11 Isolation and Culture of Ovarian Cancer Cell Lines Simon P. Langdon ............................................................................. 133 12 Isolation and Culture of Leukemia Cell Lines Hans G. Drexler ................................................................................ 141

vii

viii

Contents

PART IV FUNCTIONAL ASSAYS

IN

CELL CULTURE

13 Cell Sensitivity Assays: Clonogenic Assay Jane A. Plumb .................................................................................... 14 Cell Sensitivity Assays: The MTT Assay Jane A. Plumb .................................................................................... 15 PARP Cleavage as a Means of Assessing Apoptosis Peter Mullen ...................................................................................... 16 Detection of Apoptosis by the TUNEL Assay John Lawry ........................................................................................ 17 Apoptosis Measurement by Annexin V Staining Eric Miller ......................................................................................... 18 Cell Adhesion Assays William N. Scott ............................................................................... 19 Radial Monolayer Cell Migration Assay Michael E. Berens and Christian Beaudry ........................................ 20 Invasion and Motility Assays William N. Scott ............................................................................... 21 Identification of Senescence in Cancer Cells Lesley J. Jardine ................................................................................. 22 Angiogenesis Assays William N. Scott ............................................................................... 23 Flow Cytometric DNA Analysis of Human Cancer Cell Lines Peter Mullen ......................................................................................

PART V MODIFICATION

OF

159 165 171 183 191 203 219 225 231 239 247

CANCER CELLS

24 DNA-Mediated Gene Transfer Amanda J. M. O’Donnell .................................................................. 25 Development of Drug-Resistant Models Helen M. Coley ................................................................................. 26 Immortalization of Human Prostate Cells With the Human Papillomavirus Type 16 E6 Gene Norman J. Maitland, Catherine A. Macintosh, Christian Schmitz, and Shona H. Lang ........................................................................ 27 The Use of Matrigel to Facilitate the Establishment of Human Cancer Cell Lines as Xenografts Peter Mullen ......................................................................................

259 267

275

287

Contents

ix

PART VI COCULTURE SYSTEMS 28 Coculture of Prostate Cancer Cells Shona H. Lang and Norman J. Maitland ........................................... 295 29 Coculture of Ovarian Cells Using Porous Tissue Culture Inserts Katherine E. Snow and Simon P. Langdon ........................................ 303

PART VII CELL LINE CONTAMINATION 30 Cell Culture Contamination: An Overview Simon P. Langdon ............................................................................. 31 Detecting Mycoplasma Contamination in Cell Cultures by Polymerase Chain Reaction Cord C. Uphoff and Hans G. Drexler ............................................... 32 Elimination of Mycoplasma from Infected Cell Lines Using Antibiotics Cord C. Uphoff and Hans G. Drexler ............................................... Appendix 1 Formulations of Commonly Used Cell Culture Media ............. Appendix 2 Human Cancer Cell Lines Available from the ATCC and DSMZ Cell Banks (Combined List) .................................... Index ............................................................................................................

309

319

327 335 341 349

Contributors CHRISTIAN BEAUDRY • Neurogenomics Division, TGen, The Translational Genomics Research Institute, Phoenix, AZ MICHAEL E. BERENS • Neurogenomics Division, TGen, The Translational Genomics Research Institute, Phoenix, AZ HELEN M. COLEY • Oncology Division, Postgraduate Medical School, University of Surrey, Guildford, UK WILHELM G. DIRKS • DSMZ German Collection of Microorganisms and Cell Cultures, Braunschweig, Germany HANS G. DREXLER • DSMZ German Collection of Microorganisms and Cell Cultures, Braunschweig, Germany GERMAN G. GOMEZ • Department of Pathology, University of Colorado Health Sciences Center, Denver, CO LESLEY J. JARDINE • Cancer Research UK Oncology Unit, Western General Hospital, Edinburgh, UK CAROL A. KRUSE • Departments of Immunology and Pathology, University of Colorado Health Sciences Center, Denver, CO JA-LOK KU • Cancer Research Institute, Seoul National University, Korea SHONA H. LANG • YCR Cancer Research Unit, Department of Biology, University of York, York, UK SIMON P. LANGDON • Cancer Research UK Oncology Unit, Western General Hospital, Edinburgh, UK JOHN LAWRY • Institute For Cancer Studies, University Medical School, Sheffield, UK CATHERINE A. MACINTOSH • YCR Cancer Research Unit, Department of Biology, University of York, York, UK KENNETH G. MACLEOD • Cancer Research UK Oncology Unit, Western General Hospital, Edinburgh, UK RODERICK A. F. MACLEOD • DSMZ German Collection of Microorganisms and Cell Cultures, Braunschweig, Germany NORMAN J. MAITLAND • YCR Cancer Research Unit, Department of Biology, University of York, York, UK ERIC MILLER • Cancer Research UK Oncology Unit, Western General Hospital, Edinburgh, UK

xi

xii

Contributors

PETER MULLEN • Cancer Research UK Oncology Unit, Western General Hospital, Edinburgh, UK NORA M. NAVONE • Department of Genitourinary Medical Oncology, MD Anderson Cancer Center, Houston, TX AMANDA J. M. O’DONNELL • School of Biological Sciences, University of Manchester, Manchester, UK MATILDE OLIVE • Department of Genitourinary Medical Oncology, MD Anderson Cancer Center, Houston, TX JAE-GAHB PARK • Cancer Research Institute, Seoul National University College of Medicine, Seoul; National Cancer Center, Gyeonggi Korea SO-YEON PARK • National Cancer Center, Gyeonggi, Korea JANE A. PLUMB • Department of Medical Oncology, University of Glasgow, Cancer Research UK Beatson Laboratories, Glasgow, UK ADAM I. RIKER • Lee Moffitt Cancer Center and Research Institute, Tampa, FL CHRISTIAN SCHMITZ • YCR Cancer Research Unit, Department of Biology, University of York, York, UK WILLIAM N. SCOTT • School of Biology and Biochemistry, Queen’s University, Belfast, UK KATHERINE E. SNOW • Molecular Medicine Unit, University of Leeds, Leeds, UK PATRICIA TRONCOSO • Department of Pathology, MD Anderson Cancer Center, Houston, TX CORD C. UPHOFF • DSMZ German Collection of Microorganisms and Cell Cultures, Braunschweig, Germany

Basic Principles of Cancer Cell Culture

3

1 Basic Principles of Cancer Cell Culture Simon P. Langdon 1. Introduction Cell culture is practiced extensively throughout the world today. The techniques required to allow cells to grow and be maintained outside the body have been developed throughout the 20th century. In the 50 years since the publication of the first human cancer cell line, HeLa (1), thousands of cell lines representing most of the spectrum of human cancer have been derived. These have provided tools to study in depth the biochemistry and molecular biology associated with individual cancer types and have helped enormously in our understanding of normal as well as cancer cell physiology. Although some caution is required in interpreting data obtained by studying cells in vitro, it has allowed investigation of a complex disease such as cancer to be simplified to its component parts. The aim of this chapter is to introduce some of the basic concepts involved in the practice of cell culture. 2. Evolution of Cancer Cell Culture The science of cell and tissue culture has evolved steadily throughout the last century and its origins can be traced back to 1885 (see Table 1). In that year, Wilhelm Roux reported that the medullary plate of a chick embryo could be maintained in saline solution for several days. Many of the early experiments used material derived from amphibians as it was cold blooded and often demonstrated tissue regeneration. In 1887, Arnold demonstrated that frog lymphocytes could migrate and survive in saline. Soon after, in 1898, the first experiment using human tissue was reported when Ljunggren showed that human skin could survive in vitro if placed in ascitic fluid. With the turn of the century, longer culture experiments were attempted and in 1903, Jolly was able to maintain salamander leukocytes in vitro for a month. However, despite these early experiments, it is Ross Harrison who is generally regarded as the “father” of tissue culture. Harrison explanted tissue from frog embryos into frog lymph clots and the fragments of tissues not only survived but nerve fibres grew from the cells (2). These experiments were fundamental in showing continuation of function in vitro and also in establishing a general technique of tissue culture. This technique From: Methods in Molecular Medicine, vol. 88: Cancer Cell Culture: Methods and Protocols Edited by: S. P. Langdon © Humana Press Inc., Totowa, NJ

3

4

Langdon

Table 1 Early Milestones in Cancer Cell Culture Date

Event

Investigator

1885

First tissue (chicken embryo) maintained in vitro (for several days)

Wilhem Roux

1898

First human tissue (skin) maintained in vitro (in ascitic fluid)

Ljunggren

1903

First tissue (salamander leucocytes) to be maintained for 1 mo

Jolly

1907

First functional experiment (frog nerve fibre growth) and first general technique (use of lymph clot)

Ross Harrison

1911

First investigations of factors in medium required for growth and survival

Warren Lewis

1922

First culture of epithelial cells

Albert Ebeling

1943

First continuous rodent cell line

Wilton Earle, George Gey

1951

First continuous human cancer cell line (HeLa)

George Gey

1955

Systematic definition of nutritional needs of animal cells in culture

Harry Eagle

1961

Normal cells (fibroblasts) have a finite lifespan in culture

Hayflick/Moorhead

1965

First defined serum-free medium

Ham

1965–present

Development and use of large numbers of cell lines

Multiple

was developed further by Montrose Burrows, who replaced lymph clot with plasma clot, and by Alexis Carrell who showed that embryo extracts had useful growth promoting activities and could aid growth within culture (3,4). In 1911, Warren Lewis began studies to identify factors required for growth in culture, and by 1914 Losee and Ebeling were culturing cancer cells. The first continuous rodent line was generated by Wilton Earle in 1943 at the National Cancer Institute and this investigator is credited with being the first to grow cells on glass and from single cells (5). In 1951, George Gey developed the first human cancer continuous cell line, HeLa, and this cell line is still used extensively today (1,6). The 1950s and 1960s were marked by detailed studies by a host of investigators, including Eagle, Fischer, Parker, Healy, Morgan, White, and Waymouth, defining the nutritional requirements of cells in culture leading to the development of the media in current use. In the 1960s, Ham designed a fully defined serum-free medium (7,8), and in the 1970s, Sato and his colleagues optimized the addition of hormones and growth factors to serum-free media (9). Since the 1970s there has been the continuous development of thousands of cancer cell lines providing large numbers of models for most forms of cancer.


5

Table 2 Definition of Cell Culture Terms Term

Definition

Cell culture

Maintenance of dissociated cells in culture

Tissue culture

Maintenance of tissue explants in culture

Cell line

A culture that is subcultured beyond the initial primary culture phase

Finite cell line

A cell line with a limited lifespan that eventually undergoes senescence

Continuous cell line

A cell line that is essentially immortal and continues indefinitely

Primary culture

The initial culture derived from in vivo material

Clone

The progeny isolated from a single cell

Immortalization

Enabling of cells to extend their life in culture

Lag phase of growth

Initial phase of growth when cells are subcultured

Log phase of growth

Most rapid growth phase when culture shows exponential growth

Plateau phase of growth

Phase when cell become confluent

Population doubling time

Time for cell number to double

Cell banks

Repositories of cancer cell lines and related materials

Substrate

The matrix on which a culture is grown

Passage

Subculture of cells from one container to another

Confluent

Situation wherein cells completely cover the substrate

3. Cell Culture Definitions and General Germs Cell culture, like many other areas of technology, has developed its own language. Some of the more commonly used definitions are listed in Table 2. The term “cell culture” refers to the culture of disaggregated cells while “organ culture” describes the use of nondispersed tissue, both encompassed by the description “tissue culture”. The initial culture taken directly from an individual is referred to as the “primary culture” and when diluted and transferred into further containers (a process referred to as “subculture” or “passage”), it becomes a “cell line.” Cell lines may be categorized as either “continuous” lines, which have the potential for indefinite population expansion, or “finite,” lines, which undergo a limited number of population doublings before “senescence.” Becoming a continuous cell line requires “transformation” and this necessitates either the presence of cells that are already transformed at the initiation of the culture or undergoing transformation in the early generations. Cell lines may exist either as adherent cultures or they may grow in “suspension.” Most cell types will adhere to a “substrate” such as plastic or glass and proliferate as a monolayer, while suspension cultures do not attach to a substrate and will grow floating in medium.

6

Langdon Table 3 Components of Media Components of Eagle’s basal medium (BME) Amino acids

Vitamins

Inorganic salts

Other

Arginine Cystine Glutamine Histidine Isoleucine Leucine Lysine Methionine Phenylalanine Threonine Tryptophan Tyrosine Valine

Biotin D-Ca pantothenate Choline Folic acid i-Inositol Nicotinamide Pyridoxal HCl Riboflavine Thiamine HCl

CaCl2 KCl MgSO4 NaCl NaHCO3 NaH2PO4

D-Glucose Phenol red

Additional components added in other media Amino acids

Vitamins

Inorganic salts

Other

Alanine Asparagine Aspartic acid Cysteine Glutamic acid Glycine Hydroxyproline Proline Serine

Ascorbic acid Biotin Cholesterol Niacin p-aminobenzoic acid Nicotinic acid Pyridoxine

Fe(NO3)3 KH2PO4 MgCl2 Na2SeO3 CuSO4 FeSO4 ZnSO4 Ca(NO3)2 KNO3

HEPES Hypoxanthine Linoleic acid Putrescine Pyruvate

4. Basic Requirements of Cells in Culture For cells to thrive in culture, a variety of conditions must be met. As for the in vivo setting, nutritional and environmental conditions are essential for cell health. Nutrition is provided by media with or without the addition of serum. For adherent cells, attachment to a substrate (now generally plastic) is important while carbon dioxide and oxygen levels have to be maintained within certain limits.

4.1. Media The synthetic media currently in use today were developed in the 1950s. These basal media contain amino acids, carbohydrates, vitamins, and salts (see Table 3 and Appendix 1). Serum or further components, such as growth factors and hormones, are added to the basal media to provide the complete mix necessary for growth. The composition of


7

media range from those containing the most essential ingredients, for example, Eagle’s basal medium (BME) to those containing a much broader range of components, such as Medium 199. The medium must also be buffered to allow a stable pH, ideally around pH 7.4. One of the first media to be developed was BME. This emerged from Harry Eagle’s studies that sought to identify a medium that would support a wide variety of both normal and malignant cell types (10,11). This medium was subsequently modified to produce a number of popular media. Increasing the amounts of individual amino acids gave Eagle’s minimum essential medium (MEM) (11), while Dulbecco’s modified Eagle’s medium (DMEM) contained a fourfold increased concentration of amino acids and vitamins (12) with a further change increasing the glucose content 4.5-fold. Iscove’s modified Dulbecco medium (IMDM) was developed to support hemopoietic precursors and is a modification of DMEM, containing selenium, additional amino acids and vitamins, sodium pyruvate, and HEPES buffer (13). Glasgow minimum essential medium (GMEM) was a variation of Eagle’s medium that was used to study factors affecting cell competence. This contains a twofold increased concentration of individual amino acids and vitamins (14). In 1950, Morgan and colleagues described a medium that could support the growth of explanted tissue (15). This became known as Medium 199 and contained many more components than found in Eagle’s medium and had broad applicability for the culture of many cell types. A less complex version of Medium 199 is CMRL 1066 developed at the Connaught Medical Research Institute (16). Initially designed as a serum-free medium, it can be supplemented with serum to support the growth of many cell types. Another medium developed to address serum-free growth was Waymouth’s medium, designed as a totally serum-free medium for cultivation of mouse L929 cells but proven useful for other cell lines also (17). Ham’s Nutrient Mixtures F10 and F12 were originally developed for the growth of Chinese Hamster Ovary (CHO) cells either with or without serum supplementation (7,8). The combination of F12 and DMEM as a 1/1 mix has found widespread use in serum-free formulations combining the richness of F12 with its trace elements and increased vitamins with the nutrient potency of DMEM. Ham and coworkers went on to develop the MCDB series of media which were developed for serum-free growth of individual cell lines using supplements or low levels of fetal bovine serum protein. In 1959, McCoy described a basic formulation that was subsequently modified to create a medium supporting the growth of a wide variety of primary cultures (18). RPMI 1640, developed by Moore and colleagues at Roswell Park Memorial Institute (19), is a medium extensively used for supporting the growth of many types of cell culture. This has become the medium of choice for many tissue culture laboratories. Media is available from commercial sources in several formats—normal strength medium (shelf life, 9–12 mo), concentrates that are diluted down (generally 10X) (shelf life, 12–24 mo) and powdered medium that has a long shelf life (2–3 yr) and can be made when needed. Concentrates and powdered medium require the addition of sterile water.

8

Langdon

4.2. Serum Although media contains many of the essential nutrients required for growth, additional key elements are provided by serum. Serum supports the survival and growth of cells in culture to the extent that it is capable of replacing many of the in vivo hormonal, nutritional, and stromal elements present in the in vivo cell environment. Serum proteins include hormones, growth factors, lipids, transport (binding) proteins, enzyme cofactors, and attachment factors (9). The concentrations of individual components of serum will vary with the age and health status of the animals of origin and for this reason fetal and newborn calf sera are extensively employed for most cancer culture studies though human and equine sera are also used. Typically, concentrations of 5–20% serum in media are considered optimal depending on cell type. Higher percentages generally add little benefit for increased cost. The levels of serum proteins will vary to some degree from batch to batch of sera and individual cell cultures will have differing requirements for these components. It is generally recommended that a batch of serum is bought that can last from 1–2 yr stored at –20°C. Since batches of sera from individual suppliers differ to some degree in their composition, several small amounts should be obtained from a range of suppliers and then a number of cell lines used by the laboratory should be tested. The parameters to be assessed will generally include growth rates and attachment efficiency. Generally, some information on the biochemical analysis together with certain growth and microbiological tests is available on the Certificate of Analysis.

4.3. Serum-Free Media The use of serum has permitted the growth of many cell types in culture, however there are a number of drawbacks associated with its use. First, although the ingredients of media are clearly defined, sera will vary in its composition dependent on its batch. These differences in composition may produce some changes in a number of parameters including growth rate, attachment, and other functional endpoints. Some components in serum are in fact growth inhibitory although further supplementation may still be required where some components are present at insufficient levels. For certain purposes, the presence of proteins at undefined levels may also prove a complication, for instance where measurements of a cell secreted protein are being made or the effects of media conditioned by cells in a bioassay necessitate a fully defined background. Finally, although sera are now routinely checked for the presence of contaminants, viruses in particular have frequently been present in the past. For these reasons, together with considerations of cost and greater reproducibility, there has been a move to the use of totally defined media. In the 1960s and 1970s, two strategies were developed to define media that did not require the addition of serum. Sato and colleagues pioneered the addition of specific supplements to existing basal media while Ham and coworkers increased the concentrations of components of the basal medium until they could support growth. The key categories of additives include hormones, binding proteins, lipids, trace elements, and attachment factors. Sato’s experiments in supplementing medium identified several factors that appeared to have widespread value in maintaining the growth of many cell types in


9

media alone (9,20). These included insulin, transferrin, and selenite (ITS) and often epidermal growth factor and hydrocortisone (HITES). Serum albumin and fibronectin are also widely used. The media selected is frequently a 1/1 mixture of DMEM and Ham’s F12 though other media such as RPMI 1640, IMDM, and the various MCDB media are also commonly used. Other additives that can have great value for specific cell lines include fibroblast growth factor, estrogen, glucagon, prostaglandins, and triiodothyronine (9). Ham’s laboratory developed the MCDB series of media to provide a defined and optimally balanced environment to promote growth of specific cell types. For example, fibroblasts grow in MCDB 110, keratinocytes in MCDB 201, and 1551 and CHO cells in MCDB 302 media (21). When transferring from serum-containing medium to serum-free it is advisable to reduce the serum content gradually to aid adaptation to a reduced nutritional environment. Transferring to a serum-free medium requires more care when trypsinization is undertaken. Generally, serum will rapidly inactivate trypsin, however if serum is not being used, then a trypsin inhibitor can be added to neutralize the trypsin. If attachment to the substrate is poor, precoating with a collagen or fibronectin solution may help.

4.4. The Substrate For growth and differentiation in culture almost all types of cancer cells require interaction with a substrate. Most cancer cell types will grow as monolayers on plastic or glass. The major exceptions are hematopoietic cell lines and most small cell lung cancer cell lines that prefer to grow in suspension as single cells and as clusters of cells respectively. Polystyrene is the most widely used plastic, though other substrates such as polycarbonate, polytetrafluoroethylene and polyvinyl are also available. These plastics require treatment with irradiation or chemicals to produce a charged surface. Cell adhesion can be greatly increased by coating the substrate with extracellular matrix (ECM) components. Widely used ECM proteins include collagen, fibronectin, and laminin. Alternatively, substrates can be precoated with serum or with medium conditioned by cells which produce ECM molecules. Although monolayer culture is often the simplest and most convenient mode of culture, more complex systems can provide a greater level of information. Growth within an ECM such as collagen or Matrigel in three dimensions, rather than on two, can provide more complete morphological and biochemical differentiation (22,23). The use of dual cultures wherein two populations of cells, e.g., carcinoma cells and fibroblasts, are separated by a filter, allows study of paracrine interactions and the roles of diffusible factors (see Chapters 28 and 29).

4.5. Physical Environment Maintenance of the physical environment conditions within certain limits is required for optimal cell growth. For most mammalian cultures, the preferred temperature is 36.5° ± 1°C and although cells can still grow at lower temperatures, they will die rapidly at temperatures above 40°C. Culture media contain buffering systems that generally require a CO2 atmosphere and frequently 5% CO2 is preferred. Most cancer cells

10

Langdon

require a pH value that is around 7.2–7.4 and media should be changed regularly as cell growth produces respiratory byproducts that acidify the media. The pH indicator commonly added to medium is phenol red which is yellow at pH 6.5, orange at pH 7.0, red at pH 7.4, and purple at pH 7.8, thus providing a simple visual indication of the pH status of the culture. Finally, humidity levels are important as evaporation of water from the medium will concentrate salt levels which could eventually cause cell lysis. For optimal growth, the osmolality of the media should be kept within relatively narrow limits.

5. Primary Cell Culture Primary culture, i.e., the initial culture established from an individual, represents the situation most closely related to the original tissue. The primary material used may be either a fragment, for example an explant, that can be made to attach to the substrate wherein cells can migrate and grow directly from the fragment, or tumor material that can be broken up by mechanical or enzymatic means into single cells or clusters of cells. The source of the material can have an impact on the efficiency of this process, with cultures being more easily established from primary ascitic or pleural effusions already containing cells in suspension than from solid tumors. Enzymes routinely used for disaggregation include trypsin and collagenase. Many of the cell types within the initial cell mix may not adhere to a substrate readily or grow under the culture conditions, and the balance of cell types in culture may change rapidly with time as the fast-growing cells outgrow the slower or nonproliferating cell types. This loss of heterogeneity has both advantages and disadvantages. With selection to produce a more homogeneous cell population, if the predominant emerging cell type obtained is the one of interest then this might be considered helpful and desirable. For the development of cell lines, this is necessary to allow a pure population to emerge. The disadvantage of selective growth is that the heterogeneity and diversity of the multicellular tumor is lost with the subsequent absence of key intracellular interactions.

6. Cancer Cell Lines The development of a culture beyond the primary culture results in a “cell line.” The importance of a cell line lies in its ability to provide a renewable source of cell material for repeat studies. Cell line models should reflect the properties of their original cancers, e.g., maintenance of histopathology when transplanted into immunodeficient mice, genotypic and phenotypic characteristics, gene expression and drug sensitivity (24). However, as it is frequently fast growing cell lines from poorly differentiated tumors that are generally selected for growth in vitro, the cell lines in widespread use may not necessarily always reflect those found in the majority of the clinical disease (24). Virtually all types of cancer cells can now be grown in culture. The classical studies of Hayflick and Moorhead in the early 1960s demonstrated that diploid human fibroblasts could undergo a limited number of divisions (approx 50) in culture before enter-


11

ing “crisis” and senescence (25). Most cancer cell lines will undergo indefinite numbers of divisions, and immortal cell lines can extend to thousands of divisions. For a cell line to become “continuous” (rather than “finite”) cells must be present at low levels in the initial culture that have the ability to divide indefinitely or cells have to undergo “transformation.” This transformation can be produced via chemical or viral means (see Chapter 26). Once a new cell line has been established, it should be characterized and confirmed to be free of contamination. These aspects are covered in Chapters 4 and 5 and 31. As cell lines undergo increasing numbers of passages, they may lose certain features such as differentiation characteristics; however they may also demonstrate greater homogeneity as the most rapidly growing subclones will emerge. Stocks of the cell lines should periodically be frozen at a variety of passage numbers to provide a renewable resource. As model systems, cell lines possess a number of advantages over primary cultures. As mentioned above, their predominant strength is the ability to repeat studies with a well characterized culture system that can be used in multiple laboratories. With continued culturing a relatively homogeneous cell population will arise unlike the primary culture that may contain many types of stromal and infiltrating cell types potentially complicating the interpretation of data.

6.1. General Growth Characteristics of Cell Lines When cell lines are subcultured, they will pass through several well-defined stages of growth. Monolayer cells when initially subcultured will take time to adhere to the substrate and, if they have been disaggregated by proteolytic enzymes (like trypsin), need time to repair the damage caused by these enzymes. At this point the culture will grow relatively slowly and this stage is referred to as the “lag phase.” As the culture starts growing, paracrine exchange of growth factors will help accelerate the growth rate and an increasing percentage of cells will undergo cell division. The initial cell density is a factor here and the higher the cell density, the more rapidly the culture will grow. The culture will demonstrate its most rapid phase of growth, often exponential and therefore called the “log phase.” Finally, as the monolayer fills the available substrate area with cells in close contact with each other (confluency) and relatively high use of sera and media components, the growth rate will slow down to a “plateau” at a particular “saturation density” that is characteristic for a cell line (for a particular set of conditions) and this is referred to as the “plateau phase.” It is generally recognized that the longer the cells are in the plateau phase before subculture, the longer they remain in the lag phase after subculture.

6.2. Cancer Cell Collections Cancer cell lines are widely available through a number of large cell banks. The largest of these are listed in Table 4 and in addition there are many other national collections that are often government sponsored and nonprofit making. The World Federation for Culture Collection has 469 culture collections in 62 countries (http:// www.wfcc.info), although not all hold cancer cell cultures. The number of more spe-

12

Table 4 Major Cell Line Banks

12

Web Address

Postal Address

Further Information

American Type Culture Collection (ATCC)

http://www.atcc.org

10801 University Blvd., Manassas, VA, 20108-1549, USA

Contains over 4000 cell lines, incl. 950 (700 human) cancer cell lines

Corriell Cell Repository

http://locus.umdnj.edu/ccr

401 Haddon Ave., Camden, NJ 08103, USA

Contains cell lines covering over 2000 genetic diseases

Deutsche Sammlung Von Mikroorganismen Und Zellkulturen GmbH (DSMZ)

http://www.dsmz.de

Mascheroder Weg 1b, D-38124 Braunscweig, Germany

Contains over 500 human and animal cell lines

European Collection of Animal Cell Culture (ECACC)

http://camr.org.uk

CAMR, Salisbury, Wilts, SP4 OJG, UK


Interlab Cell line Collection (ICLC)

http://www.iclc.it

L.Go Rosanna Benzi 10, 16132, Genova, Italy


Japanese Collection of Research Bioresources (JCRB)

http://cellbank.nihs.go.jp

1-1-43 Hoen-Zaka, Chu-Ku,Osaka 540, Japan


RIKEN Gene Bank

http://www.rtc.riken.go.jp

3-1-1 Koyadai, Tsukuba, Science City, Ibaraki 305, Japan


Langdon

Bank


13

cialized banks concentrating on specific cancer types is also expanding rapidly and these are most easily identified through worldwide web searches. It is recognized that if a cell line can be obtained from a reputable bank then that is the best source. These provide guarantees of authentication and freedom from contamination that may not be the case when transferring between laboratories. The latter transfer often spreads microbial contamination (especially mycoplasma) and increases the opportunities for mix-ups. Sometimes, however, an academic laboratory may be the only source of a unique cell line.

6.3. Development of New Cell Lines or Use of Existing Lines? There are now very large numbers of cell line panels available in the National Cell Banks. It is therefore worth reconsidering the merit of developing new cell lines if cell lines are readily available. The advantages of using existing cell lines include their instant availability and, at least for some cell types, the hundreds of models available within the cell banks (see Appendix 2) Many lines are well characterized and novel data generated may be related to the existing literature on that model. Time does not have to be spent on developing new models but can be devoted to using them. However, in many situations, cell lines are not available and may need to be derived. A great deal of time and effort can be spent in creating and characterizing new cancer cell lines; however, there are several situations where this is desirable. First, there may not be any or only a few established cell lines available for the tumor type under study. Cell lines with particular characteristics, e.g., derived resistance to a new drug, may also be unavailable. Finally, there will be novelty in deriving the new cell line that has to balanced against the effort required to characterize it.

7. Basic Laboratory Design and Selection of Equipment Although the design and selection of equipment for a cell culture facility will depend on the scale of the operation, several requirements are fundamental to even the smallest of laboratories. Housed within the space dedicated to cell culture will be the microbiological safety cabinet(s), inverted microscope(s), sink, centrifuge, and specific small apparatus such as tissue culture flasks, sterile glassware, and plastics. Ideally, CO2 incubators should also be in the same room to minimize movement of cells around the laboratory. Storage facilities such as liquid nitrogen tanks or fridges/freezers holding tissue culture media or serum do not necessarily need to be in the same room, and similarly sterilization equipment and autoclaves may reside nearby. Within this area, human traffic should be minimized especially in the vicinity of the tissue culture cabinets. All cell culture manipulations should be undertaken in microbiological safety cabinets designed to protect the laboratory worker from exposure to aerosols from cell culture. Such cabinets operate on the principle that air from the vicinity of the culture is filtered through a HEPA (high efficiency particulate air) filter before exiting the cabinet. They are classified at levels I, II, and III. Class I cabinets are the simplest and easiest to maintain but offer least sterile protection to the cell culture. Class II cabinets

14

Langdon

are probably the most widely used for cell culture work and offer good protection to both the operator and cell cultures since air passing over the working area is HEPA filtered. Class III cabinets are completely sealed units and are used for more hazardous types of work. For all classes of cabinet, quality of airflow and filter integrity should be tested routinely every 6–12 mo. Before use, cabinets should be switched on for 10– 20 min and surfaces wiped with ethanol both before and after use. Cabinets may also be equipped with a UV light that can be used to sterilize the surfaces of the cabinet.

8. Safety A number of biohazards are associated with cell culture and the new user should be made aware of these. Potential hazards may be harbored by cancer cells both within cultures or within sera (26). Cancer cells may carry viruses while serum may carry not only viruses but other microorganisms as well. Clinical material should always be regarded as potentially infectious until proven otherwise and treated as such. Blood borne pathogens such as hepatitis B virus (HBV) and the human immunodeficiency virus (HIV) are perhaps the most common risk although cells transformed with viral agents, such as SV-40, Epstein-Barr virus (EBV), and HBV should also be treated with caution. Viral infection is also possible from the culture of animal material (27). A reported incident of cancer developing from a needle-stick injury highlights the risk of possible transfer and infection but good practice should make this risk extremely low (28). With careful technique and appropriate caution, the risks of working within a general cell culture facility undertaking studies with cancer cell lines or primary cultures should be no greater that working in any other area of a cell or molecular biology laboratory. References 1. Gey, G. O., Coffman, W. D. and Kubicek, M.T. (1952) Tissue culture studies of the proliferative capacity of cervical carcinoma and normal epithelium. Cancer Res. 12, 364–365. 2. Harrison, R. G. (1907) Observations on the living developing nerve fiber. Proc. Soc. Exp. Biol. Med. 4, 140–143. 3. Burrows, M. T. (1910) The cultivation of tissues of the chicken embryo outside the body. JAMA 55, 2057. 4. Carrel, A. (1912) The permanent life of tissue outside of the organism. J. Exp. Med. 15, 516. 5. Earle, W. R., Schilling, E. L., Stark, T. H., Straus, N. P., Brown, M. F. and Shelton, E. (1943) Production of malignancy in vitro. IV. The mouse fibroblast cultures and changes seen in the living cells. J. Natl. Cancer Inst. 4, 165–212. 6. Masters, J. R. (2002) HeLa cells 50 yr on: the good, the bad and the ugly. Nature Rev. 2, 315–318. 7. Ham, R. G. (1963) An improved nutrient solution for diploid Chinese hamster and human cell lines. Exp. Cell. Res. 29, 515–526. 8. Ham, R. G. (1965) Clonal growth of mammalian cells in a chemically defined, synthetic medium. Proc. Natl. Acad. Sci. USA, 53, 288–293. 9. Barnes, D. and Sato, G. (1980) Serum-free culture: a unifying approach. Cell 22, 649–655. 10. Eagle, H. (1955) Amino acid metabolism in mammalian cell cultures. Science 130, 432–437.


15

11. Eagle, H. (1955) Nutrition needs of mammalian cells in culture. Science 122, 501. 12. Dulbecco, R. and Freeman, G. (1959) Plaque formation by the polyoma virus. Virology 8, 396–397. 13. Iscove, N. N., Guilbert, L. W. and Weyman, C. (1980) Complete replacement of serum in primary culture of erythropoietin-dependent red cell precursors (CFU-E) by albumin, transferrin, iron, unsaturated fatty acid, lecithin and cholesterol. Exp. Cell Res. 126, 121–126. 14. MacPherson, I. and Stoker, M. (1961) Polyoma transformation of hamster clones—an investigation of genetic factors affecting cell competence. Virology 16, 147–151. 15. Morgan, J. F., Morton, H. J. and Parker, R. C. (1950) The nutrition of animal cells in tissue culture. Initial studies on a synthetic medium. Proc. Soc. Exp. Biol. Med. 73, 1–8. 16. Parker, R. C. (1957) Altered cell strains in continuous culture: a general survey. In Special Publications of the New York Academy of Sciences: 5 (Whitelock, O., ed). NY Acad. Sci., New York, 303–313. 17. Waymouth, C. (1959) Proliferation of sublines of NCTC clone 929 (strain L) mouse cells in a simple chemically defined medium (MB752/1). J. Natl. Cancer Inst. 22, 1003. 18. McCoy, T. A., Maxwell, M. and Kruse, P. F. (1959) Amino acid requirements of the Novikoff hepatoma in vitro. Proc. Soc. Exp. Biol. Med. 100, 115–118. 19. Moore, G. E., Gerner, R. E. and Franklin, H. A. (1967) Culture of normal human leukocytes. JAMA 199, 519–524. 20. Barnes, D. and Sato, G. (1980) Methods for growth of cultured cells in serum-free medium. Anal. Biochem. 102, 255–270. 21. Ham, R. G. and McKeehan, W. L. (1978) Development of improved media and culture conditions for clonal growth of normal diploid cells. In Vitro 14, 11–22. 22. Weaver, V. M., Fischer, A. H., Peterson, O. W., and Bissell, M. J. (1996) The importance of the microenvironment in breast cancer progression: recapitulation of mammary tumorigenesis using a unique human mammary epithelial cell model and a three-dimensional culture assay. Biochem. Cell Biol. 74, 833–851. 23. Weaver, V. M. and Bissell, M. J. (1999) Functional culture models to study mechanisms governing apoptosis in normal and malignant mammary epithelial cells.J. Mammary Gland Biol. Neopl. 4, 193–201. 24. Masters, J. R. W. (2000) Human cancer cell lines: fact and fantasy. Nat. Rev. 1, 233–236. 25. Hayflick, L. and Moorhead, P. S. (1961) The serial cultivation of human diploid cell strains. Exp. Cell Res. 25, 585–621. 26. UKCCCR Guidelines for the use of cell lines in cancer research. Brit. J. Cancer 82, 1495–1509. 27. Lloyd, G. and Jones, N. (1984) Infection of laboratory workers with Hantavirus acquired from immunocytomas propagated in laboratory rats. J. Infect. 12, 117–125. 28. Gugel, E. A. and Saunders, M. E. (1986) Needle-stick transmission of human colonic adenocarcinoma. New Engl. J. Med. 315, 1487.

16

Langdon

Basic Techniques of Cell Culture

17

2 Essential Techniques of Cancer Cell Culture Kenneth G. Macleod and Simon P. Langdon 1. Introduction Cell culture utilizes a number of core techniques, and although there can be marked diversity in how these procedures are practiced, there are elements and features that are universally applied. This chapter describes some of the essential techniques and provides typical protocols. It is assumed that aseptic technique will be used for all these procedures unless mentioned otherwise.

1.1. Primary Culture A primary cell culture is the initial culture set up directly from a body tissue. Primary cancer cultures can be initiated and derived from a variety of tissue types such as solid tumor fragments (primary or metastatic) or cell suspensions, for example, aspirates, including peritoneal ascites or pleural effusions. Cell suspensions can be particularly convenient for developing cell lines as they are already growing as single cells or clusters, avoiding the need for mechanical or enzymatic dispersion. The cellular composition of primary cultures is often very variable with hematopoietic and stromal cell types contributing to the cellular mix. Fibroblasts, in particular, can be problematic as they attach readily to matrices and often outgrow the cancer cell population. Cancer cells differ from most normal cell types in their ability to grow in suspension, for example, in agar, but generally cultures are initiated by allowing cells to adhere to a substrate before proliferating. A number of strategies have been developed to help disperse fragments of tissue and these include mechanical and enzymatic methods (see Subheading 1.2.).

1.2. Routine Feeding and Maintenance Cell cultures should be examined regularly and routinely (preferably daily) both macroscopically and microscopically. The cell morphology and cell density should be checked by microscope and the presence of contaminants such as fungus and bacteria should be evaluated. Macroscopically, the color and turbidity of the medium should be monitored. Media (plus serum and other additives) should be changed reguFrom: Methods in Molecular Medicine, vol. 88: Cancer Cell Culture: Methods and Protocols Edited by: S. P. Langdon © Humana Press Inc., Totowa, NJ

17

18

Macleod and Langdon

larly and not allowed to become depleted, depriving cells of specific nutrients, or becoming acidic. The pH of the medium is most easily monitored by the addition of color indicators such as phenol red. The frequency of media renewal will be dependent on the growth rate of the culture with more rapidly growing cultures requiring more regular changes.

1.3. Subculture of Cells When a culture has occupied the complete surface of a flask (for a monolayer culture) or has grown to a point where media has been depleted of nutrients (for a suspension culture), then it requires “subculture” (also described as “passaging” or “splitting”) to maintain healthy growth. This process reduces the cell density back to a level where the cells will grow optimally again and not exhaust the medium of nutrients too rapidly. The process of detachment of the adherent monolayer to give a single cell suspension is often referred to as “harvesting.” The use of proteolytic enzymes such as trypsin, breaks the cell-cell and cell-substrate links and creates a single-cell suspension. Subculture of a primary culture into a secondary culture produces a “cell line.” Once a cell-line is created, not only should it be given a designation, but a record of the number of subcultures or passages should be kept to provide a general indication of the lifetime of the culture. The cell line should be characterized and this process is described in Part II.

1.4. Cloning A clone is the population of cells derived from an individual cell and cloning is the process of isolating this individual cell and developing its progeny. Cloning will thus produce cultures that are genetically homogeneous at the outset. The colony forming efficiency (CFE) is a measure of the ability of a culture or cell line to produce colonies and represents the number of colonies produced/number of individual cells cultured. Primary cultures tend to have low CFE values, typically 50 cells) to form (approx several weeks) and dependent on the growth rate of the cell line, colonies are counted. 7. It is generally convenient to count wells containing approx 100–200 colonies. At higher densities, colonies will start to merge and it will be unclear as to whether colonies developed from single cells or have merged. Colonies can also be stained with dyes such as hematoxylin or crystal violet to aid counting.

3.5. Cell Counting 3.5.1. Hemocytometer Counting 1. Trypsinize monolayer cells until they are detached from the plastic (see Subheading 3.3.) and then add medium containing FCS to inhibit cell damage by over-trypsinization. This step is not necessary for suspension cultures. 2. Ensure that the cells are in single-cell suspension. This should be done by repeatedly drawing the cells into a pastette or a syringe and checking the appearance of a drop of cells under the microscope (see Note 11). 3. Prepare the hemocytometer and cover slip. These should be clean and wiped with 70% alcohol (see Note 12). Take care not to scratch the silvered surface. 4. Slightly moisten the hemocytometer and cover slip (see Note 13) and place the cover slip over the grid. Gently move the cover slip back and forth resulting in its attachment to the

26

Macleod and Langdon

hemocytometer and the appearance of Newton’s rings (rainbow colors like those formed by oil on water). 5. The hemocytometer is now ready to be filled. Place a pipet filled with a well-suspended mix of cells at the edge of the coverslip and then by slowly expelling some contents, draw the fluid into the chamber by capillary action. 6. Obtain the cell concentration by counting cells in the grid area. Several choices are available depending on the density of the cells: a. Count the 25 squares within the large middle square. Total cell count in 25 squares × 10,000 = number of cells/mL. b. Count the number of cells in the 4 outer squares. Total cell count in 4 squares × 2500 = number of cells/mL. The choice of methods is dependent on the cell concentration. The accuracy of the procedure depends upon the number of cells counted. 7. Each hemocytometer normally has two grid areas and it is good practice to count both and use the mean count to calculate cell number. 8. One advantage of using the hemocytometer method is that it allows for a variation of technique involving the use of Trypan blue dye to enable differentiation between dead/ damaged cells and the healthy viable cell population.

3.5.2. Viable Cell Counting Using Trypan Blue Trypan blue is a dye that does not interact with the cell unless the cell membrane is damaged. Healthy undamaged cells exclude the dye, but it is readily absorbed by damaged cells and renders them clearly visible (blue) under the microscope. 1. A 0.5-mL aliquot of cell suspension, obtained as previously described, is incubated with 0.5 mL of 0.4% Trypan blue dye (5 min at room temperature). 2. Cells are counted using the normal hemocytometer protocol and the percentage of dead or damaged cells can be established.

3.5.3. Electronic Counting Detailed operating manuals and training are provided by Beckman Coulter. The following is a brief operating summary: 1. Switch on instrument 30 min prior to use. To avoid build up of debris in the pipe-work the instrument is routinely emptied after each use (daily) and refilled with Coulter Clenz. This is removed and the empty instrument refilled with saline. This is done automatically by making selections from the menu. Prepare counting pots by adding the required volume of PBS (typically 9.8 mL, allowing samples to be added in 0.2 mL increments). The use of an automatic dispensor makes this task much easier. 2. Instrument parameters are set on the set up page. These include sample volume particle size range (upper and lower thresholds) and the number of counts per sample. 3. Cells should be harvested and trypsin inactivated by adding an equal volume of FCScontaining media. Where necessary cells are agitated to give a single cell suspension (see Note 11). Cell samples contained in 24 well trays may be stabilized for longer by placing them on an ice tray. 4. Measure 0.2 mL of cell suspension into each counting pot just prior to counting. Mix gently by rolling or inverting. Do not shake vigorously as this will create air bubbles which may be counted by the instrument.


27

5. Flush aperture by selecting this option from the start-up menu. Check background by counting a blank sample. If this is unacceptably high repeat the flushing step. 6. Count the sample. Repeat process for further samples. It is not necessary to flush the aperture between replicate samples. 7. The results may be directed to a printer or to a computer.

3.6. Cryopreservation 3.6.1. Freezing 1. Cells that are typically in log phase of growth should be used, and ideally medium should be replaced 24 h prior to freezing. 2. For monolayers, cells should first be washed with PBS (after removal of culture medium) and then treated with trypsin-EDTA (5 mL/75 cm2 flask) to detach the monolayer. 3. After confirmation of detachment by observation through a microscope, trypsin should be inactivated by addition of culture medium (containing 10% serum). 4. An aliquot of the cell suspension is then removed and a cell count taken using either a hemocytometer or cell counter. 5. Cells are then pelleted by centrifugation (5 min at 600g) and resuspended in freezing mix (kept cold on ice)(see Note 14) at a density of approx 107 cells/mL (see Note 15). 6. The cell suspension is then aliquoted into freezing ampules, e.g., cryotubes or other appropriate freezing vials (see Note 16). These vials should be labeled with the essential information, including at least the cell name, passage number, date, and the name of the individual storing the vials 7. Ampules are then placed into the freezing chamber of a programmable freezer if this is available. A simple alternative is to place ampules into a polystyrene container and then put this into a –70°C/-80°C freezer overnight. This achieves a cooling rate that approximates 1°C/min. Once ampules are at –70°C to –80°C, they can be transferred directly to liquid nitrogen (see Note 17).

3.6.2. Recovery and Thawing 1. When thawing, cells should be warmed rapidly by removing an ampule from the liquid nitrogen and placing it into a 37°C water bath (see Note 18). Ampules should be washed with 70% ethanol before opening. 2. Once thawed the freezing solution should be placed into 10% serum/90% medium (1 mL freezing solution into 20 mL serum/medium) and spun down at 600g for 5 min. This may be repeated and this will effectively remove the DMSO from the cells (see Note 19).

4. Notes 1. If sufficient material is available, it is desirable to store some of the primary material in liquid nitrogen. This is useful for later characterization. 2. The addition of antibiotics in media added to primary cultures is also a useful precaution and combinations such as penicillin/streptomycin are widely used. 3. Various cocktails of digestive enzymes are used. For example, the cocktail suggested in Chapter 8 for brain tissues include 0.002% DNase type I, 0.01% hyaluronidase type V, and 0.1% collagenase type IV in RPMI 1640 and tissue is treated at 37°C for 1–3 h. 4. A number of strategies are used to help isolate and selectively aid the growth of cancer cells compared to stromal (especially fibroblastic) cells when initially in culture. If the

28

5. 6.

7. 8.

9.

10.

11.

12. 13.

14.

15. 16.

17.

Macleod and Langdon fibroblasts rapidly adhere but clusters of cancer cells are more loosely attached, these clusters can be made to detach by tapping the flask. The floating clusters are then collected by centrifugation of the medium and resuspended in a new flask. Similarly, trypsinization can be used to separate rapidly attaching/detaching cells from more adherent cell types. Finally, if clear cancer colonies are viewed by microscope in a “sea” of fibroblasts, then after marking the positions of colonies with a marker pen on the base of the flask, use a scraper to mechanically remove the fibroblast overgrowth. Cells from suspensions can be cryopreserved at the outset to allow culture to be set up at a later time. The use of a higher percentage of serum (15–20%) can be helpful at the outset. Depending on the source of the culture, “conditioned medium “ that the cells were growing in, e.g., ascitic or pleural effusion fluid, may provide some benefit and can be added at a level of 10% final volume. Subculturing is best performed when cells are still in log phase and at their healthiest. The cells should be trypsinized for the minimum period necessary. This will vary from cell-line to cell-line and may vary from 1 min to longer than 20 min. Tapping the flask when cells have rounded up will also help detachment. Different cell lines will take varying amounts of time to reattach after trypsinization. Many cell lines will have reattached almost completely within 24 h but others take longer. As the cell density is relatively low after subculturing it is important to ensure that the media is well gassed; otherwise, it will become alkaline as the pH increases. When growing in suspension live cells are typically bright when viewed under phase contrast. Viability can be assessed by use of a vital dye such as Trypan blue (see Subheading 3.5.2.). Most cell lines will readily form single-cell suspension by repeated agitation with a pastette. If this is not sufficient then a 10-mL syringe with an attached needle should be used. Begin with a wide-bore needle and then try smaller-bore needles until a satisfactory suspension is achieved. If a number of samples are to be counted, for example, from a 24well tray, then it is best to prepare only a few samples at a time as some cells may reclump if left sitting for a prolonged period. If the hemocytometer technique is routinely used, the counter and cover slips may be stored in a small volume of 70% ethanol after cleaning, in readiness for next use. When moistening the counter and cover slip do not overwet them. It is usually sufficient to breathe on the counter or the cover slip prior to bringing them into contact. If this does not work, then cooling the counter by running cold water over it may help. Staining of cells often facilitates visualization and counting. Cells should be treated with 10% formalin (time/conditions) and then stained with Trypan blue or other stain to increase visibility of the cells. The freezing mixture can vary in composition. The key determinant is for the DMSO to be present at 10%. Serum percentages can then vary from 20% to 90% with medium making up the difference. Glycerol can be used instead of DMSO. Cells are frozen at high cell densities and also recovered at high density. Either plastic or glass ampules can be used. Plastic ampules have the advantage of being presterilized and are easy to label; glass ampules, when sealed, are more likely to exclude nitrogen. Cells can be preserved in liquid nitrogen either in the liquid phase (–196°C) or in the vapor phase (–120°C to –156°C).


29

18. Care should be taken on thawing, as liquid nitrogen may cause ampules to explode. Liquid nitrogen is hazardous and gloves and protective face equipment should be used when handling it. DMSO can penetrate skin and carry dissolved products across the skin barrier, so it should be handled with caution. 19. When a batch of cells is stored away, it is good practice to thaw one of the ampules to confirm viability. 20. General safety considerations include the following: a. All cell culture work should be undertaken in a microbiological safety cabinet, preferably Class II. b. Aseptic technique should be used at all times in this cabinet. c. The work surfaces should be sprayed with alcohol (or similar decontaminant) before and after use. d. All biological waste should be autoclaved and liquids or media treated with bleach. e. Mouth pipeting should be avoided.

30

Macleod and Langdon

Characterization of Cell Lines

33

3 Characterization and Authentication of Cancer Cell Lines An Overview Simon P. Langdon 1. Introduction With over 3000 cancer cell lines described in the literature and thousands in regular use, it has become essential to characterize and authenticate cell-line models. Characterization of the properties of cell lines is important for a number of reasons. First, the relationship of the cell line to the cells of origin should be established to confirm that the cell line is derived from and is representative of its tissue of origin. If the cell line is to have any value as a model it should reflect the properties of the cell type from which it was derived. For example, for a cell line established from a breast carcinoma it is helpful to show that the cell line has characteristics consistent with breast and epithelial origin. Although the genetic profile should remain constant, expression may change and features such as differentiation characteristics may be lost over time in culture. Similarly, as the culture develops, certain clones may emerge with selection and predominate. Particularly important is the need to check for purity and potential cross-contamination with other cell lines. The history of cell culture indicates that cross-contamination between cell lines is widely prevalent and continues to be an ongoing problem (1–3). During the 1970s and 1980s, multiple studies initiated by Stanley Gartler and Walter Nelson-Rees demonstrated that one in three cell lines were either contaminated or even totally replaced by other cell lines (4–8). The most frequent contaminant was the HeLa cervical carcinoma cell line which had been established in 1951 (9) and had been widely distributed to many research laboratories. As a result of its rapid growth rate, once mixed with other cell lines it would generally outgrow them. Unfortunately this problem has not disappeared, and contamination continues to be widespread (1,2,10). This area is covered in more detail in Chapter 30.

From: Methods in Molecular Medicine, vol. 88: Cancer Cell Culture: Methods and Protocols Edited by: S. P. Langdon © Humana Press Inc., Totowa, NJ

33

34

Langdon

Fig. 1. Methods of characterization for cancer cell lines.

Cross-contamination between cell lines of the same species is not the only issue since contamination with cell lines of other species is also frequent. Therefore methods are required that not only define and confirm the unique nature of a cell line but also identify its species of origin (Fig. 1). Definitive methods that characterize and authenticate the individuality and identity of a cell line include DNA fingerprinting/profiling and cytogenetic analysis and these are covered in detail in Chapters 4 and 5. Techniques to verify the species from which the cell line was obtained have been developed and these are valuable not only to confirm the proposed origin of the cell line but to check for the presence of contamination with other cell lines. Other levels of characterization include the monitoring of the general features of the cell line and these include observation of morphology, growth rates, colony-forming efficiency, antigen expression, ploidy, and cell-cycle characteristics.

2. Authentication and Characterization of New Cancer Cell Lines When a new cell line is being developed, consideration should be given to a number of issues (11). First, the origin of the cell line should be clearly established. This is generally not too great an issue for cell lines being developed from primary tumors but is more relevant if the surgical material is ascites, some form of effusion, or even a metastatic deposit that is not fully validated. The latter is exemplified by the recent redesignation of the SW626 cell line as likely to be of colon origin rather than ovarian cancer origin based on cytokeratin profiles (12) although it had been regarded as

Characterization of Cell Lines

35

an ovarian cancer cell line since 1974. Clearly, the diagnosis of disease should not be in dispute, and as much clinical and pathological information as possible should be collected. Key data include histology, stage and grade of differentiation of the tumor, treatment information (e.g., radiotherapy, chemotherapy), and whether there was a response to treatment. It is essential that material from the origin of the cell line should be stored. This is useful both for pathological verification of the diagnosis (and to ensure that it was representative of the rest of the tumor) and also to provide material for DNA fingerprinting/profiling and/or cytogenetic characterization for comparison with the newly developed cell line. As the cell line is expanding in culture, it is valuable and important to keep full records of the development of the newly cultured line, in particular, the passage number. It is important to characterize cell lines at an early stage in culture, preferably after only a few passages. Some expansion is needed for two reasons. First, enough material is required to bank away samples of the cell line, maintain it in culture, and for characterization. Second, the primary and early secondary cultures will generally contain a mixture of cell types, for example, a new carcinoma culture in addition to containing epithelial cells may contain other cell types such as fibroblasts or macrophages, and some culturing is needed to allow these to be removed and a pure population to emerge. Next, the new cell line should be tested for the presence of mycoplasma. Recommendations have been made as to how the cell line might be designated (11). The key considerations are that its name should be unique (so that it will not become confused with other cell lines) and that it should remain anonymous with respect to the patient. The first derived human cell line, HeLa, was named after the patient donating the cells, Henrietta Lacks; however, in an attempt to preserve some degree of confidentiality the donor was said to be Helen Lane or Helen Larson (13). This approach is best avoided. Many designations attempt to indicate both the institute where cell line was derived and also its type, for example, SKOV-3 (Sloan Kettering Ovarian Cancer). This is a helpful strategy. If the cell line is to be used extensively, it is important to provide as much information as possible in the first publication of the cell line. Consideration should also be given to whether the cell line should be placed into one of the major cell culture banks.

3. DNA Fingerprinting and DNA Profiling DNA fingerprinting has proven a valuable approach to authenticating and characterizing cell lines (14–16). The technique was developed in 1985 by Alec Jeffries and has since found extensive use in forensic DNA typing (17,18). This technique exploits the variability found within the “noncoding” regions of the human genome, which represent approx 90% of DNA bases. In the 10% of the genome that encodes genes, variation between individuals is very limited. However, within the remaining 90% of bases there is marked diversity between individuals, the assumed result of such regions being of lesser importance for survival. Moreover, it has become evident that large regions of this noncoding DNA are organized into repeat sequences called variable number of tandem repeats (VNTR). Two types of repeat sequences have been defined: minisatellites (repeat lengths of 10–100 bp) and microsatellites or short tan-

36

Langdon

dem repeats (STRs) (repeat lengths of 2–5 bp). Many of the initially identified VNTR regions had large numbers of base pairs (20–50) per repeat and the number of repeats could extend from 50 to several hundred. Such a region could therefore vary from 1000 bp to over 10,000. The number of repeats and the length of the VNTR is therefore very characteristic, and in a variable VNTR locus over 95% of the population will have alleles of different lengths (i.e., are heterozogous at this locus). The probability of two unrelated individuals having the same combination of allelic lengths at a specified VNTR locus is much less than 1%. Several strategies have been developed to fingerprint or profile these variable regions. These strategies can be divided into multilocus and single-locus approaches. Multilocus probes interact with a range of loci throughout the genome, producing “fingerprints” on Southern blot analysis. Analysis of single loci produces “profiles” of single or double bands. Classical DNA profiling has used the large VNTR regions and subjected these to restriction fragment length polymorphism (RFLP) analysis. After digestion with a restriction enzyme, a VNTR region will usually produce restriction fragments of two different lengths, one obtained from the paternal and the other from the maternal chromosome. These are separated by electrophoresis and identified by Southern blot analysis using targeted probes. Autoradiography can then be used to detect the positions of the fragments. Having identified band positions by autoradiography, the membrane can be re-used and, once the first probe is removed, further probes investigated. Analysis of from four to six VNTR loci will then produce a highly specific DNA profile. Alternatively, membranes can be treated with a mixture of probes to produce a “DNA fingerprint.” The probes are used at lower stringencies and detect polymorphisms at multiple loci, yielding more information. The major advantage of this method is the exploitation of the high degree of variability in the VNTR regions so the likelihood of two individuals possessing the same DNA profile is extremely low. The limitation of the method is that the restriction fragments may not be clearly separated and it can be difficult to distinguish fragments of similar but different lengths. Current DNA profiling tends to analyze STR regions in conjunction with polymerase chain reaction (PCR) amplification of DNA. STRs are abundant polymorphic loci and are dispersed throughout the genome. Each STR locus consists of a number of core repeats of 2–5 bp in length, and in practice tetranucleotide repeats have been shown to be very robust for PCR typing. This approach is both faster and less labor intensive than RFLP analysis as many of the steps are automated. While RFLP analyses typically require 20 nanograms of DNA, 1 nanogram is often sufficient for PCRbased analysis. After amplification of the DNA using primers targeted to the STRs, the size of the STR alleles are determined by electrophoresis of the PCR products. Multiple STR loci are analyzed to obtain the same discriminatory power as single locus systems. A recent report has proposed the use of STR profiling for producing an international reference standard for human cell lines (19). Six unlinked autosomal and one X-linked STR loci were used to determine individual genotypes. This method was authenticated in 253 human cell lines, is relatively inexpensive 5000 370–760

80a 81b 85c 78d 97e 78f

3

10 to >15000

>99.9g

Heterozygosity (%)

Minisatelite VNTR Apo-B1 Col2A1 D1S80 D17S5 D2S44 PAH

SLS SLS SLS SLS SLS SLS

Microsatelite STR (GTG)N

MLS

—

Chromos. ends

VNTR, variable number of tandem repeats; STR, short tandem repeats; SLS, single-locus system; MLS, multiple-locus system. a-gWith regard to heterozygosity, see Dirks et al. (9).

ing multi-allelic variation among individuals (12). Sequence analysis demonstrated that the structural basis for polymorphism of these regions is the presence of tandemrepetitive, nearly identical DNA elements which are inherited in a Mendelian way. Depending on the length of the repeats, VNTRs are classified into minisatellites, consisting of 9 to >70-bp core sequences and microsatellites, which include all short tandem repeats (STRs) with core sizes from 1–6 bp (see Table 1). Both categories of repeats can be governed by one definite locus or are spread all over the genome and belong to the single-locus system (SLS) or multiple-locus system (MLS), respectively. Using SLS fingerprinting, a few loci used in sequential combination can distinguish between two individuals who are not identical twins. MLS fingerprints using hundreds of relevant polymorphic loci in a single step have generally a higher resolution potential but also a restriction to classical restriction fragment length polymorphism (RFLP) analyses. With the advent of the polymerase chain reaction (PCR) technology and availability of complete sequence information of the human genome, DNA fingerprinting has been revolutionized. The number of accurately mapped mini- and microsatellite markers available are greater by 100-fold for each chromosome. The primer sequences for amplification of specific STRs or VNTRs, as well as the information on the PCR product sizes and estimated heterozygosity, are available from a number of genome databases within the World Wide Web (see Note 1).

1.3. Tasks of DNA Fingerprinting in Scientific Cell Culture Most facilities culturing cells use multiple cell lines simultaneously. Because of the complexity of experimental designs today and because of the fact that the broad use of

Verification of Cell Line Identity

45

cell lines in science and biotechnology continues to increase, the possibility of inadvertent mixture of cell lines during the course of day-to-day cell culture is always present. Based on the reputation of a laboratory, the information on an exchanged cell line within a scientific cooperation is normally thought to be correct. This is the main reason for the increasing problem of cross-contaminated cell cultures all over the world. However, cross-contaminations of cell cultures seem to appear as the “peccadillo” of scientists, since publication of alerts on misidentified or cross-contaminated cell lines are most often simply ignored by the scientific community. Routine identification and early detection of contamination of a given cell line with another should prevent mistaken interpretation of experimental results. A typical modern laboratory applying molecular biology and cell culture techniques is normally not equipped with expensive robots and kits for forensic DNA profiling. Therefore, the purpose of this chapter is to describe a rapid, practical, inexpensive, and reliable method with a high discrimination potential for students, technicians, and scientists. The fingerprinting protocols below are based on standard techniques including PCR and enable the following features: 1. Authentication of a newly generated and immortalized cell line if DNA of the respective patient/donor is available (see Note 2). 2. Confirmation of cell line identity between different passages of an intensively used cell line, e. g., the human embryonic kidney cell line 293 (HEK 293; see Note 3). 3. Evaluation of “purity” of a given cell line and detection of the percentage of cell mixture in an early stage of contamination. 4. Characterization of somatic hybrid cell lines involving human cells. 5. Mapping of loss of heterozygosity of chromosomal regions, for example, to detect tumor suppressor genes.

The following subheadings present the technique of multiplexed PCR amplification fragment length polymorphism (AmpFLP) of six prominent and highly polymorphic minisatellite VNTR loci (see Table 1) and one additional locus for sex determination using the detection of the SRY gene on the Y chromosome. The combination of six VNTRs increases the exclusion rate to a sufficient extent and allows discrimination of one human cell line from another at the level of 106. In order to rule out any false positives, it is highly recommended that suspicious cell lines are tested further using the multi-locus fingerprint system if they reveal identical or similar DNA profiles based on AmpFLP VNTR. The combination of rapidly generated DNA profiles based on single-locus VNTR loci and confirmation of duplicate AmpFLP banding patterns using multi-locus fingerprints, constitutes a highly reliable and robust method independent of the quantity of individual cell lines examined.

2. Materials

2.1. DNA Extraction 1. Phosphate-buffered saline (PBS): 140 mM NaCl, 27 mM KCl, 7.2 mM Na 2HPO 4 · 12 H 2O, 14.7 mM KH 2PO 4, pH 7.2; autoclave. 2. Absolute isopropanol and absolute ethanol. 3. TE 10/1: 10 mM Tris-HCL, 1 mM EDTA, pH 8.0, prewarmed to 50°C.

46

Dirks and Drexler Table 2 Primer Sequences of Highly Polymorphic Human VNTR Loci Primer designation

Primer sequences

ApoB1-F ApoB1-R

5'-ATGGAAACGGAGAAATTATGGAGGG-3' 5'-CCTTCTCACTTGGCAAATACAATTCC-3'

D1S80-F D1S80-R

5'-GAAACTGGCCTCCAAACACTGCCCGCCG-3' 5'-GTCTTGTTGGAGATGCACGTGCCCCTTGC-3'

D17S5-F D17S5-R

5'-AAACTGCAGAGAGAAAGGTCGAAGAGTGAAGTG3' 5'-AAAGGATCCCCCACATCCGCTCCCCAAGTT-3'

D2S44-F D2S44-R

5'-AGCAGTGAGGGAGGGGTGAGTTCAAGAG-3' 5'-GAAAACACTTCAGTGTATCTCCTACTCC-3'

COL2A1-F COL2A1-R

5'-CCAGGTTAAGGTTGACAGCT-3' 5'-GTCATGAACTAGCTCTGGTG-3'

PAH-F PAH-R

5'-GTTATGTGATGGATATGCTAATTAC-3' 5'-GTGGTGTATATATATGTGTGCAATAC-3'

SRY-F SRY-R

5'-CTCTTCCTTCCTTTGCACTG-3' 5'-CCACTGGTATCCCAGCTGC-3'

4. High Pure PCR Template Preparation Kit (Roche) (see Note 4). 5. Water bath prewarmed to 72°C. 6. Standard tabletop microcentrifuge capable of 13,000g centrifugal force.

2.2 Multiplex PCR Fingerprinting 1. Thermal cycler: Perkin Elmer Cetus 480 (see Note 5). 2. Taq DNA polymerase (Qiagen); 10X PCR reaction buffer (Qiagen); 5X Q-solution (Qiagen). 3. 6X Loading buffer: 0.01% (w/v) bromophenol blue, 0.01% (w/v) xylene cyanol, 60% glycerol (v/v), 60 mM EDTA. 4. Primer (any supplier): (see Table 2). The primers should be concentrated at 100 µM in TE (10/1) as stock solutions and stored at –20°C, while working solutions should be aliquoted at 10 µM in small amounts (approx 25–50-µL aliquots) and stored frozen at –20°C.

2.3. Multi-locus DNA Fingerprinting 2.3.1. Restriction Endonuclease Digestion 1. 2. 3. 4. 5. 6. 7. 8.

2-mL reaction tubes. Multiblock heater. Microcentrifuge. Disposable pipets. Restriction endonuclease Hinf I (high concentration 50 U/µL). 10X Hinf I restriction buffer. 5X gel loading buffer. Bidistilled water


47

9. Absolute isopropanol (–20°C). 10. 70% (v/v) ethanol (–20°C).

2.3.2. Agarose Gel Electrophoresis. 1. 500-mL Erlenmeyer flask. 2. 1X Tris-Acetate-EDTA (TAE)-buffer: (40X TAE stock solution: 1.6 M Trizma base, 0.8 M Na-Acetate, 40 mM EDTA. Adjust pH to 7.2 with glacial acetic acid). 3. Ultra Pure agarose. 4. Microwave oven. 5. Electrophoresis system consisting of gel tray and comb, electrophoresis chamber and power supply, digoxigenin-labeled molecular weight DNA marker II (Roche), ethidium bromide (5 mg/mL), and UV-transillumination screen.

2.3.3. Blotting and Hybridization 1. 2. 3. 4. 5. 6.

Whatman paper. Nylon membrane positively charged (Roche). Parafilm, 2 glass plates (30 cm × 30 cm), paper towels, 500-g weight, 0.4 M NaOH. Oven capable of 120°C temperature for DNA fixation. Rotatable hybridization oven, plastic wrap. 6X SSC: 0.9 M NaCl, sodium citrate, pH 7.0), 0.4% (v/w) blocking reagent (Roche) in 6X SSC, pH 7.0. 7. Prehybridization solution: 28 mL bidistilled water, 16 mL 25% (v/w) dextran sulfate, 4 mL 10% (v/w) SDS, 2.32 g NaCl, 100–200 µg/mL of heat-denatured E. coli DNA. 8. Hybridization solution: 10 mL of prehybridization solution complemented with 100-130 pmol of the digoxigenin-labeled oligonucleotide (GTG)5 for 150 cm2 of membrane. 9. Stringency washes: wash buffer I : 3 X SSC (pH 7.5) ; wash buffer II : 3 X SSC (pH7.5), 0.1% SDS.

2.3.4. Chemiluminescent Detection of Digoxigenin-Labeled DNA 1. Maleic acid buffer: 0.1 M maleic acid, 0.9 M NaCl; adjust pH to 7.5 with conc. NaOH, autoclave. 2. 10% (v/w) blocking reagent in maleic acid buffer. 3. Wash buffer A: 0.3 % (v/v) Tween-20 in maleic acid buffer. 4. Activation buffer: 0.1 M Tris-HCl, 0.9 M NaCl, 50 mM MgCl2; adjust pH to 9.5 with HCl. 5. Substrate solution: CSPD (Roche) 1/100 dilution in activation buffer; X-ray developer, X-ray fixer, X-ray film, X-ray film cassettes.

3. Methods 3.1. Preparation of High-Molecular-Weight DNA The principle of this assay is that cells are lysed during a short incubation time with proteinase K in the presence of a chaotropic salt (guanidinium-hydrochloride), which immediately inactivates all nucleases. Nucleic acids bind selectively to glass fibers prepacked in the filter tube. Bound genomic DNA is purified in a series of rapid washing and spinning steps to remove inhibiting cellular components. Finally, low salt elution releases the DNA from the glass fiber cushion. 1. In order to prevent isolation of DNA fragments from apoptotic cells take the cell lines to be tested for identity from cell cultures with viabilities over 80%.

48

Dirks and Drexler

2. Centrifuge the cell culture suspension containing 3-5 × 106 diploid cells in a 15-mL tube at 2000g for 4 min. Remove the supernatant with a disposable pipet and discard. Resuspend the remaining pellet carefully in 5 mL PBS using a pipet and centrifuge again. 3. After the washing step, resuspend the pellet in 200 µL PBS by vortexing. Make sure that tiny clumps of cells are carefully resuspended. Prewarm the waterbath to 72°C. 4. To isolate the genomic DNA, the commercially available DNA extraction kit from Roche is applied. Add 200 µL of solution I (guanidinium-hydrochloride), well mixed, to the sample solution and mix by pipeting. 5. Immediately add 40 µL proteinase K, mix well using a vortex, and incubate at 72°C for 10 min. 6. Add 100 µL of isopropanol to the sample, mix well, and apply the whole mixture to a filter tube. Centrifuge for 1 min at 6000g. 7. Discard the flow-through, add 500 µL of inhibitor removal buffer, and centrifuge again for 1 min at 6000g. 8. Discard the flow-through, add 500 µL of wash buffer, and centrifuge again for 1 min at 6000g. 9. Repeat step 8. 10. Add a new tube and 200 µL of elution buffer preheated to 72°C and centrifuge for 1 min at 6000g. For maximum yield repeat the elution step using 100 µL elution buffer. The purified genomic DNA concentration should be approx 10 ng/mL per sample, depending on the ploidy status of the cell line used. The genomic DNA should be stored at 4°C.

3.2. Hotstart Multiplex PCR Fingerprinting The amplification procedure and the parameters described here are optimized for the application in 0.5-mL reaction tubes in a Perkin Elmer DNA Thermal Cycler 480 (see Note 5). An adjustment for any other equipment may be necessary. Follow strictly general rules to avoid DNA carryover contaminations. 1. Carry out DNA extraction using equipment (pipets, microcentrifuge, etc.) that is independent from the PCR set up. Optimally, separate the laboratory used for this procedure from rooms where the PCR reaction is set up or the PCR products are analyzed. 2. Use reagents that have been stored in small aliquots to provide a constant source of uncontaminated reagents. Test new aliquot batches and compare for quality prior to use. 3. Never carry out reamplifications. 4. If possible, set up the reactions in a PCR working station or a hood that allows for irradiation of used pipets, tips, and tubes by UV-light. 5. It is highly recommended that gloves be worn during the whole procedure.

Furthermore, it is also fundamental to integrate the appropriate positive and negative controls, e.g., HeLa DNA and H2O, respectively). Prepare a premaster mix calculated for 50 µL per reaction of each sample, plus 1 additional reaction according to Table 3.We recommend using colored tubes for aliquots of primer stocks as well as for the premaster mixtures and PCR reactions for the individual loci. 1. Transfer 40 µL of the premaster mix to 0.5 mL PCR reaction tubes according to the sample number. Add 1 µL dH2O to the water control reaction. 2. Prepare the Taq DNA polymerase mix (10 µL per reaction, plus 1 additional reaction) containing 1X PCR buffer and 1 U Taq polymerase per reaction. Keep the mixture on ice.


49

Table 3 Preparation of Premaster Mixtures for Printing Individual Single-Locus Spots Stock-solution

Apo-B1 D17S5 (blue) (red)

10X PCR buffer 5X Q-solution dNTP (2 µM) Forward/reverse primer Bidest. H20 DNA (10–20 ng/µL)

4 — 1 1 33 1

4 10 1 1 23 1

D1S80 (yellow)

D2S44 (green)

4 10 1 0.5 24 0.5

4 10 1 2 18 5

Col2A1 PAH SRY (white) (orange) (pink) 4 10 1 1 23 1

4 — 1 1 33 1

4 10 1 1 23 1

3. Store all reagents used for the preparation of the master mix and take out the samples of DNA to be tested. Do not handle the reagents and samples simultaneously or with the same gloves. Add 1 µL of the DNA preparation (approx 10–20 ng) to the reaction solutions. 4. Transfer the reaction mixtures of step 1 without Taq polymerase to the thermal cycler, add carefully a drop of oil (if necessary) and start one cycle with the following parameters: Cycle step 1: 5 min at 95°C Cycle step 2: 3 min at 75°C Cycle step 3: 2 min at 55°C (or 62°C for D2S44 only, see below) Cycle step 4: 5 min at 72°C During cycle step 2, open the thermal lid and add 10 µL of the Taq polymerase mix to each tube to perform a hot start PCR. For many samples, the duration of this step can be prolonged. Open and close each reaction tube separately to prevent evaporation of the samples when no oil is used. Allow at least 30 s after closing the lid of the thermal cycler to equilibrate the temperature within the tubes and to remove condensate from the lid before continuing to the next cycle step. 5. After this initial cycle, perform 35 thermal cycles with the following parameters: Common program

D2S44 only

Cycle step 1: 4 s at 95°C Cycle step 2: 1 min at 55°C Cycle step 3: 1 min at 72°C

4 s at 95°C 2 min at 62°C 2 min at 72°C

plus 1 s of extension time during each cycle. 6. The reaction is finished by a final amplification step at 72°C for 10 min and the samples are then cooled to room temperature. 7. Prepare a 1.2% agarose-TAE gel containing 0.1 µg/mL of ethidium bromide. Submerge the gel in 1 X TAE and add 10 µL of the amplification product (8 µL reaction mix plus 2 µL of 6X loading buffer to each well) and run the gel at 10 V/cm. Visualize the specific products on a UV screen and save the image for documentation (see Fig. 1). 8. With regard to precise fingerprinting, we recommend using a gel-analyzing software program (any supplier) capable of fragment length determination and of saving the DNA profiles into a database.

50

Dirks and Drexler

Fig. 1. AmpFLP VNTR DNA profiles of prominent human cross-contaminating cell lines. Genomic DNA of cell lines was used to amplify alleles from Apo-B1, D17S5, D1S80, and D2S44. After size determination of the amplicons from each loci on a separate gel using gel analyzing software, the data are entered in a database, creating a specific DNA profile for each cell line. Lanes 1–13: 1, HeLa, human cervix carcinoma; 2, CCRF-CEM, human T-cell leukemia; 3, CTV-1, human acute myeloid leukemia; 4, NALM-6, human B cell precursor leukemia; 5, HEL, human erythroleukemia; 6, SCLC-21H, human small cell lung carcinoma; 7, DU-145, human prostate carcinoma; 8, T-24, human urinary bladder carcinoma; 9, COLO-800, human melanoma; 10, U-937, human histiocytic lymphoma; 11, HT-29, human colon adenocarcinoma; 12, SK-HEP-1, human liver adenocarcinoma; 13, K-562, human chronic myeloid leukemia in blast crisis.

3.3. High Resolution Multi-locus DNA Fingerprinting DNA profiles generated by the use of multi-locus probes result in a banding pattern harboring 30–50 bands in each lane. It is important to place suspicious cell lines in neighboring lanes, if they have revealed identical or similar DNA profiles based on the AmpFLP VNTRs technique.


51

3.3.1. Restriction Endonuclease Digestion of Genomic DNA 1. Adjust every DNA sample containing 25 µg genomic DNA to 800 µL of volume using TE (10/1) buffer. (Do not vortex the DNA solution prior to restriction endonuclease digestion, as this may cause random shearing.) Set-up the following reaction in a 2.0 mL sterile reaction tube: 10X Enzyme buffer: Restriction enzyme: 25 µg DNA: Adjust with TE buffer (10/1):

100 µL 150 U 800 µL 1000 µL

2. After adding all components, flick tubes briefly and spin the tubes in a microcentrifuge for a few seconds. Incubate in a 37°C multiblock heater or water bath for 4 h on a slow shaking platform (see Note 6). 3. Add 800 µL of ice-cold isopropanol and flick tubes to mix. 4. Centrifuge at 13,000g for 30 min. Remove isopropanol immediately using a stretched glass pipet. 5. Add 200 µL of ice-cold 70% ethanol; vortex the tubes to wash DNA (may be stored overnight or longer at –70°C). Remove as much as possible of the ethanol and allow to air dry for about 10 min. (To prevent difficulties on resuspension, do not over-dry DNA pellets in a speed-vac.) 6. Resuspend DNA pellet in 20 µL of TE buffer. Pipeting up and down a few times accelerates the resuspension process. Add 10 µL of gel loading buffer, vortex briefly, and microcentrifuge for a few seconds before loading the gel.

3.3.2. Agarose Gel Electrophoresis 1. To prepare a 0.7 % agarose solution, add 1.75 g of agarose to 250 mL 1X TAE buffer in a 500 mL Erlenmeyer flask. 2. Dissolve the agarose solution by heating in a microwave oven. When the agarose is completely dissolved, replace the water lost from evaporation with double-distilled water and mix gently. 3. Allow the agarose solution to cool down to 55–60°C before pouring into the gel mold. 4. While the agarose is cooling, prepare the gel mold by applying two pieces of autoclave tape across the open ends. Place the gel mold on a level surface. Pour the cooled agarose solution over the entire gel mold. Break any bubbles that may be present and immediately insert the toothcomb (1-mm thickness recommended). 5. Allow the agarose to solidify for 30 min and another 30 min at 4°C. 6. Remove the tapes from each end of the gel mold and place it into the electrophoresis apparatus. (If possible, the gel run should be carried out at 4°C, otherwise cool down the running buffer on ice.) 7. Fill the electrophoresis chamber with 1X TAE so that the buffer is about 5 mm above the surface of the gel. 8. Load samples and markers (digoxigenin-labeled analytical markers and 1 kb ladder) into the designated wells. 9. Electrophorese, with circulating buffer, at 40 V (constant voltage) for 19 h or until the bromophenol blue dye has migrated to the bottom edge of the gel. 10. Stain DNA in the gel with ethidium bromide solution for 20 min and destain with two rinses of double distilled water.

52

Dirks and Drexler

11, Photo documentation: Carefully slide the gel onto the transilluminator and photograph the gel with an autoradiogram ruler placed adjacent to the marker lane (1 kb ladder) for orientation. 12. Trim excess of agarose from the gel, and prepare for Southern transfer.

3.3.3. Southern Blotting and DNA Fixation The objective is to set up a flow of buffer from the reservoir through the gel and the membrane, so that the DNA fragments are eluted from the gel and transferred onto the membrane, where they will be fixed. 1. A box (22 × 22 cm) should be wrapped with 3MM Whatman paper and placed in the middle of the buffer tray or dish. 2. Apply a plastic frame with a window (for example, Parafilm stripes) that is 1 cm shorter in length and width than the size of the gel and place it onto the wick. The Parafilm serves as a barrier to prevent transfer buffer from bypassing the gel (short circuiting). 3. Fill the buffer tray with 0.4 M NaOH (at least 500 mL) until the solution is 3 cm underneath the gel. Carefully place the gel, wells facing down, on the wick in the middle of the plastic frame and ensure that the edges of the gel and the frame have a 0.5-cm overlap at each site. Avoid scratching the back of the gel! 4. Center the nylon membrane on top of the gel and wet the membrane with 0.4 M NaOH. Remove all bubbles between the membrane, gel, and wick by rolling smoothly over the surface of the membrane using a 10-mL pipet. Do not apply too much pressure to the gel as this may cause distortion. 5. Wet two pieces of Whatman 3MM paper of the same size as the gel in 0.4 M NaOH and place them on top of the membrane. Remove air bubbles between the membrane and the Whatman 3MM paper. 6. Layer on a 3-in stack of paper towels, place the glass plate and then the 500-g weight on top of the stack, and ensure that the weight and paper towels cannot tilt. 7. Allow the transfer to proceed for 8–20 h. 8. Remove paper towels and mark the position of the comb slots and the outline of the gel onthe membrane with a fine-up marker. 9. Place the damp membrane on a piece of Whatman 3MM paper and bake in an oven at 120°C for 30 min. 10. Remove the membrane from the oven. The membrane can be used immediately for prehybridization/hybridization or stored dry at 4°C.

3.3.4. Preblocking, Prehybridization, and Hybridization Prehybridization prepares the membrane for probe hybridization by blocking nonspecific nucleic acid binding sites to reduce background activity. It is recommended that a rotating hybridization oven be used; otherwise carry out the following coating procedure of the membrane using a plastic bag and a waterbath. 1. Place the membrane in a plastic bag with 10 mL 0.5% blocking reagent buffer and shake the membrane slowly for 1 h on a rotating platform at room temperature. 2. Incubate the membrane in 5–10 mL prehybridization solution prewarmed to 42°C in a rotating hybridization oven for 4 h. 3. Discard the prehybridization solution and replace it with 5–10 mL of prewarmed hybridization solution containing 10–20 pmol/mL of digoxigenin-labeled oligonucleotide GTG5 (see Note 7).


53

4. After incubation overnight with rotating, discard the hybridization solution and replace with prewarmed wash buffer I. Wash the membrane for 25 min at 42°C and repeat this step. 5. Wash membrane twice using prewarmed wash buffer II for 10 min. Proceed immediately to the detection procedure or store the membrane in wash buffer I at 4°C.

3.3.5. Chemiluminescent Detection of Digoxigenin-Labeled DNA Chemiluminescent detection is a three-step process whereby the membrane is first treated with a milk powder solution to prevent nonspecific attraction of the antibody to the membrane. Second, the membrane is incubated with a dilution of antidigoxigenin Fab fragments, and finally incubated with a chemiluminescent solution, which is the substrate for generation of photons recorded on a X-ray film. Keep the membrane wet throughout the following procedure: 1. Block the membrane in 150 mL of 2% blocking buffer for 30 min at room temperature using a clean dish. Centrifuge the antibody at 15,700g for 1 min in order to reduce background activity. Dilute the antidigoxigenin alkaline phosphatase Fab fragments 1/10,000 in a volume of 20 mL (approx 150 mU/mL). 2. Place the membrane in a heat-sealable plastic bag which has one or two unsealed sites, pipet the antibody solution, and remove all air-bubbles. 3. Heat-seal the plastic bag and incubate the membrane for 30 min on a rotating platform at room temperature. 4. Discard the antibody solution. Using a clean dish, wash the membrane twice for 15 min at room temperature using 200 mL of wash buffer A. 5. Pour off the wash buffer and incubate for 2 min in 100 mL of activation buffer. 6. Place the membrane in a plastic bag and add 10 mL of 1/100 dilution of CSPD chemiluminescent for 2 min. Ensure that the solution is completely distributed over the membrane. 7. Place the membrane between two sheets of Whatman 3MM filter paper and wipe to remove excess CSPD solution. 8. Heat-seal the wet membrane into a new plastic bag or protect the membrane with a cling film and expose the membrane to an X-ray film for various time periods (5, 15, and 30 min). Select the exposure time for optimal signal intensities. 9. Take a picture of the autoradiograph and save the image for documentation (see Fig. 2). We recommend using a gel-analyzing software (any supplier) capable of fragment length determination and saving the DNA profiles in a database.

4. Notes 1. A good starting point for searching for microsatellite markers on a specific chromosome or for information on given markers with regard to PCR product sizes, allelic frequencies, or heterozygosity is the home page of the National Human Genome Research Institute at the National Institutes of Health, Bethesda, USA (http://nhgri.nih.gov/). 2. The establishment of cell lines from specific tumors should be carried out according to the guidelines of Drexler et al. (13). With regard to an unequivocal authentication procedure, nonpathogenic tissue material should be taken at the same time the tumor material is taken from the donor. It is convenient to prepare genomic DNA from blood lymphocytes. In general, 10 mL of blood will provide sufficient DNA for thousands of PCR assays. 3. The main reason for the still increasing frequency of cross-contaminated cell cultures is the uncontrolled and blind-faith exchange between scientists. It is imperative that scien-

54

Dirks and Drexler

Fig. 2. Multi-locus (GTG)5 DNA profiles of human cell lines.The autoradiograph shows a multi-locus DNA fingerprint using (GTG)5 oligomers as a probe. 10 µg of DNA of indicated cell lines were digested to completion, size-separated on a 0.7% agarose gel, and blotted onto a nylon membrane. After hybridization with (GTG)5 and washing procedures, a chemiluminescent detection of the probe was carried out as described in Subheading 3.3. The blot was exposed for 30 min to an X-ray film. Lanes M and 1–7: BEWO, human choriocarcinoma; JAR, human choriocarcinoma (derivative of BEWO); JVM-2, human chronic B cell leukemia; NK-92, human natural killer lymphoma; MOLT-14, human T cell leukemia; 5637, human urinary bladder carcinoma; PEER, human T-cell leukemia.

tists obtain the relevant cell cultures from reputable sources like cell banks, which routinely verify the quality and authenticity of the material (ATCC in USA: www.atcc.org; DSMZ in Europe: www.dsmz.de). 4. The use of other kits capable of isolating genomic DNA is possible but has to be optimized in order to avoid the presence of inhibitory substances in the DNA preparations. Generally, DNA can be safely stored at 4°C temperature for several months. We recommend freezing aliquots of genomic DNA for long-term storage, but repeated freeze-thawing will cause shearing of the high molecular weight DNA. 5. The use of thermal cyclers other than the Perkin Elmer Cetus 480 might require some modifications in the amplification parameters, for example, duration of the cycling steps, which are shorter in comparison to other applications. Also Mg2+, primer, or dNTP concentrations might need to be altered. The same is true if other kinds of Taq polymerase are used or obtained from different suppliers; for example, we found that the parameters described were not transferable to HotStarTaq with a prolonged denaturation step (Qiagen).


55

6. Because of the viscosity of high molecular weight DNA we recommend placing the DNA samples on a shaking platform with 80 rpm during restriction endonuclease digestion. 7. Nearly all suppliers of oligonucleotides offer the possibility of labeling the primers chemically with digoxigenin. We recommend placing a single digoxigenin label at the 5'-position of the primer.

References 1. Rothfels, F. H., Axelrad, A. A., and Simonovitch, L. (1959) The origin of altered cell lines from mouse, monkey, and man as indicated by chromosomes and transplantation studies. Proc. Can. Cancer Res. Conf. 3, 189–214. 2. Simpson, W. F., and Stuhlberg, C.S. (1963) Species identification of animal cell strains by immunofluorescence. Nature 199, 616–617. 3. Gartler, S. M. (1968) Apparent HeLa contamination of human heterodiploid cell lines. Nature 217, 750–751. 4. Miller, O. J., Miller, D. A., and Allerdice, P. W. (1971) Quinacrine fluorescent karyotypes of human diploid and heteroploid cell lines. Cytogenetics 10, 338–341. 5. Nelson-Rees, W. A., and Flandermeyer, R. R. (1976) HeLa cultures defined. Science 191, 96–98. 6. Nelson-Rees, W. A. (1978) The identification and monitoring of cell line specificity. Prog. Clin. Biol. Res. 26, 25–79. 7. MacLeod, R. A. F., Dirks, W. G., Matsuo, Y., Kaufmann, M., Milch, H., and Drexler, H. G. (1999) Widespread intraspecies cross-contamination of human tumor cell lines arising at source. Int. J. Cancer 83, 555–563. 8. Drexler, H. G., Dirks, W. G., and MacLeod, R. A. F. (1999) False human hematopoietic cell lines: cross-contaminations and misinterpretations. Leukemia 13, 1601–1607. 9. Dirks, W. G., MacLeod, R. A., Jaeger, K., Milch, H., and Drexler, H. G. (1999) First searchable database for DNA profiles of human cell lines: sequential use of fingerprint techniques for authentication. Cell. Mol. Biol. 5, 841–853. 10. Epplen, J. T., McCarrey, J. R., Sutou, S., and Ohno, S. (1982) Base sequence of a cloned snake W chromosome DNA fragment and identification of a male-specific putative mRNA in the mouse. Proc. Natl. Acad. Sci. USA 79, 3798–3802. 11. Jeffreys, A. J., Wilson, V., and Thein, S. L. (1985) Hypervariable minisatellite regions in human DNA. Nature 1985, 314, 67–73. 12. Nakamura, Y., Leppert, M., O'Connell, P., et al. (1987) Variable number of tandem repeat (VNTR) markers for human gene mapping. Science 235, 1616–1622. 13. Drexler H. G., and Matsuo Y. (1999) Guidelines for the characterization and publication of human malignant hematopoietic cell lines. Leukemia 13, 835–842.

Cytogenetic Characterization

57

5 Cytogenetic Characterization of Tumor Cell Lines Roderick A. F. MacLeod and Hans G. Drexler 1. Introduction 1.1. Background: The Utility of Cytogenetic Characterization The total number of human tumor cell lines is probably too great to count accurately, but given the established sum from hematopoietic tumors alone, over 1000 known samples (1), the grand total may well exceed 10,000. Because only a minority of these cell lines are in regular use, individuals describing new cell lines should justify their establishment during characterization. There are several reasons why cytogenetic data have come to define a core element of tumor cell line characterization; the principal reason is the unique key they provide to their neoplastic origins. A wide range of tumors have been shown to display consistent and often distinct types of chromosome rearrangement that allow the neoplastic descent of cell lines carrying such changes to be inferred (2). Data documenting a myriad of cytogenetic correlations with the various malignant diseases they are associated with are compiled and continually updated, principally by Felix Mitelman and his colleagues, and are now accessible online at http://cgap.nci.nih.gov/ Chromosomes/Mitelman. Recurrent chromosome changes provide a portal to underlying mutations at the DNA level in cancer, and any cell lines bearing these changes provide ideal territory for mining them. It seems that the phenomenon of recurrent chromosome changes in various types of neoplasia reflects developmentally programmed patterns of gene expression and responsiveness within diverse cell lineages (3). Dysregulation of sensitive genes facilitates evasion of existing antineoplastic controls, including those mediated by cell cycle checkpoints or apoptosis. The tendency of cells to produce certain types of neoplastic mutations via chromosomal mechanisms, principally translocations, duplications, and deletions renders these changes microscopically visible, thereby facilitating cancer diagnosis by chromosome analysis. Arguably, of all neoplastic changes those effected chromosomally combine the greatest informational content with the least likelihood of reversal. This is particularly true of the primary cytogenetic changes that play From: Methods in Molecular Medicine, vol. 88: Cancer Cell Culture: Methods and Protocols Edited by: S. P. Langdon © Humana Press Inc., Totowa, NJ

57

58

MacLeod and Drexler

key roles in neoplastic transformation and whereby the neoplastic phenotype and cell proliferation ultimately depend. Therefore, all cell lines established from patients with chronic myeloid leukemia (CML) with t(9;22)(q34;q11) causing fusion of BCR at Chr 22q11 with ABL at Chr 9q34, which is known to be the primary change in this disease, retain this change in vitro (4). Multiple karyotypic changes in different subclones of HeLa cells (enabling HeLa contamination to be detected at a glance) have been conserved despite separate culture for over half a century, even though none have been shown to play a specific pathological role in the tumor of origin (cervical carcinoma). This suggests that secondary chromosome changes may also be stable in vitro. Nevertheless, it is not yet possible to classify certain important types of tumors cytogenetically, and disappointingly few specific recurrent changes have been described in the various epithelial tumors. Hence, the usefulness of karyotype analysis for the characterization of cell lines lies principally among those derived from tumors with stronger associations with specific chromosome rearrangements, i.e., hematopoietic (5), mesenchymal, and neuronal (6), rather than epithelial tumors. Microscopic, unlike biochemical, methods facilitate direct observations performed at the single cell level enabling detection of intercellular differences. Accordingly, a second virtue of cytogenetic data is in the detection of distinct subclones (present in many cell lines) and the monitoring of stability therein. With the exception of doublings in their modal chromosome number (tetraploidization), human tumor cell lines appear to be more stable than commonly supposed (6,7). Although not to deny the existence of aneuploidy and structural cytogenetic alterations arising in vitro, data directly documenting chromosome instability remain scarce. In particular, few or no longitudinal studies of long-term cytogenetic stability have been published using material cloned to exclude outgrowth of cryptic subclones, a plausible alternative explanation. Indeed, one of very few studies of long-term stability documented by cytogenetic methods sensitive enough to allow detection of subtle cytogenetic changes failed to detect any chromosome instability in a cytogenetically rearranged human myeloid leukemia cell line (GF-D8) over long-term passage (8). Similarly, we have compared the detailed karyotypic structures of three cell lines independently established from Hodgkin’s lymphoma (HDLM-1/2/3). Despite highly complex karyotypes, each cell line carries over 50 different chromosomal breakpoints and these cell lines have remained almost identical karyotypically in vitro (7,9). It has been suggested that chromosomal rearrangement may reach peak intensity in vivo, where these rearrangements are subject to physiological controls. These physiological controls are known to occur in lymphocyte development during the germinal center reaction, of which formation of DNA double-strand breaks is an essential part (10,11). An unexpected corollary would be that cell lines, in some cases, may be more stable than their precursor cells. A third virtue of cytogenetic data is in cell line authentication. We have found that at least one-sixth of new human tumor cell lines have been cross-contaminated by older, mainly “classic” cell lines (12,13). This problem, first publicized over 30 years ago thanks to the pioneering work of Walter Nelson-Rees (14) but neglected of late (15, 16), poses an insidious threat to experimental cancer research (17). This problem


59

is most harmful where contaminants and their targets differ significantly in character or where the range of available cell lines is limited and, therefore, sensitive to distortion. Ideally, authentication should be documented at the time of first publication by demonstrating concordant DNA profiling of tumor and derived cell line alike (see Chapter 4). As a result of apathy among investigators and journals alike, it seems, the establishment of lamentably few cell lines has been documented in this way. Therefore, for want of reference data, the vast majority of users wishing to authenticate tumor cell lines may be forced to relinquish DNA profiling in favor of the only practical alternative, cytogenetics. This avenue is closed to users of nontumor cell lines, for which karyotypes are generally too nondescript to be of any value in identification. Whether in pictorial (karyogram) or written (karyotype) forms, cytogenetic particulars are frequently documented in publications describing new tumor cell lines to serve as useful points of reference “downstream.” In addition, for those establishing cell lines from tumors, comparison of their respective cytogenetic features provides an alternative to DNA profiling for confirming identity, at least among cases displaying significant degrees of chromosomal alteration.

1.2. Cytogenetic Methodology Cancer cytogenetics has steadily gained in importance over the last three decades as a result of a series of advances, both technical and informational. It first became routine to distinguish and identify each of the 24 different human chromosomes (referred to as numbers 1 to 22, X and Y) when methods for recognizing their substructures (bands) were described in the early 1970s, principally quinacrine-banding (Q-banding) (18) and giemsa-banding (G-banding) (19). A further modification, trypsin G-banding (20), has gained wide currency since its introduction in 1973 as a result of its relative speed and simplicity. Soon thereafter, banding techniques were instrumental in the identification of the “Philadelphia chromosome” (Ph) marker in CML and its origin via a reciprocal translocation, t(9;22)(q34;q11) (21), a mechanism not known when the Ph was first observed more than a decade earlier (22). This observation marked the birth of our current picture of neoplasia as a disease of gene alteration. The advent of computer-aided image analysis in the early 1990s gave G-banding a further boost in handling complex tumor karyotypes by improving speed, sensitivity, and accuracy. The second major advance, universally referred to as FISH (fluorescence in situ hybridization), took seed during the late 1980s (2,24) and has continued to flourish. Similar to conventional isotopic in situ hybridization (isotopic-ISH), which had become by then an established, though troublesome and time-consuming technique, FISH exploits the stability and specificity of DNA-DNA hybrids formed on metaphase chromosomes after exposure to homologous DNA under renaturating conditions. Isotopic-ISH was rapidly superseded by FISH following the availability of non isotopically labeled deoxynucleotides combined with a straightforward method for their efficient incorporation into DNA by nick translation. This led to suitable probes becoming commercially available. FISH serves to bridge the gap between classical cytogenetics and molecular biology. The range of FISH is particularly impressive, enabling

60

MacLeod and Drexler

analysis of entire chromosomes, segments thereof (“chromosome painting”), or single genes, using probes comprising several megabases, or several kilobases or less of DNA respectively (“single-locus probes”). Tumor karyotypes are, nevertheless, in some cases simply too complex for straightforward analysis, even when augmented by chromosome painting. Complex karyotypes must be tackled using multicolor-FISH (M-FISH) probes, whereby each of the 24 human chromosomes is represented by a unique mixture of up to five or more differently colored probes (25). M-FISH analysis requires use of extra filters to distinguish typically six colors (to include the chromosomal counter stain) or, in the case of the analogous system, spectral karyotyping (SKY), a spectrophotometer. Although these various permutations of versatility and sensitivity impose corresponding demands on instrumentation, all FISH systems are basically similar and require broad-spectrum illumination (by ultraviolet or xenon light) and sensitive cameras to detect weaker signals, particularly those generated by short probes. All systems require special software to merge the different color channels, to improve signal/noise ratios and contrast, for example, and to generate pseudocolored images suitable for documentation. The most recent advances are informational and come from sequence/mapping data of the human genome project. Accurately mapped and sequenced bacterial/P1 artificial chromosome (BAC/PAC) clones made available as a result of these efforts allow suitably equipped investigators to map chromosome rearrangements in cancer cells at the level of single genes and beyond, thus shortlisting plausible candidates for dysregulation. This probe resource together with that of well characterized tumor cell lines comprise a formidable tool for investigating the genetic basis of cancer, and, indeed, several important cancer genes have been discovered this way. For those planning de novo cytogenetic analysis of tumor cell lines it is convenient to split the task into the following steps: harvesting (see Subheadings 2.1. and 3.1.), G-banding (see Subheadings 2.2., 2.3., and 3.2.), and FISH (see Subheadings 2.3., 2.4., and 3.3.).

2. Materials Chemical reagents may be stored up to 4 wk at 4°C, unless otherwise stated.

2.1. Harvesting 1. Cell culture(s) maintained in logarithmic phase. 2. N-Deacetyl-N-methylcolchicine (colcemid): (Invitrogen, Karlsruhe, Germany) 4 µg/mL stock solution (100X). 3. 100X Stock solution: 25 µg/mL of 5-Fluoro-2'-deoxyuridine (FUDR) (Sigma, Taufkirchen, Germany) and 1 mg/mL 1-β-D-Ribofuranosyluracil (uridine) (Sigma), 1 part/3 parts. 4. 100X 1-(2-Deoxy-β-D-ribofuranosyl)-5-methyluracil (thymidine) (Sigma): dissolve 50 mg in 100 mL. Filter sterilize through 0.22 µm filter. 5. 0.5 g/L Trypsin, 0.2 g/L EDTA (Invitrogen) for removal and dispersal of adherent cells. Store at –20°C). 6. Stock hypotonic solutions: 5.59 g/L KCl; or 9.0 g/L NaCitrate. Working hypotonic solutions: mix KCl and NaCitrate, e.g., 20/1, 10/1, 1/1, 1/10, 1/20 shortly before use, allowing time to reach desired temperature.


61

7. Fixative: absolute methanol and glacial acetic acid (3/1). Use fresh but may be stored up to 4 h at 4°C.

2.2. G-Banding Only 1. Slides (frosted-ends for annotation): wash mechanically overnight in warm ion-free detergent, rinse twice in deionized water, oven-dry, and leave overnight in ethanol (70%). Slides should then be polished using a lint-free cloth (or nonshredding tissue) and stored wrapped in aluminum foil at –20°C until use. 2. Phosphate buffered saline (PBS): adjust to pH 6.8 (Giemsa solution) or pH 7.2 (trypsin). 3. 140X Trypsin stock solution: dissolve 17.5 mg trypsin 1/250 (Difco, Hamburg, Germany) in PBS, pH 6.8. Store 500-µL aliquots at –20°C for up to 6 mo. 4. Giemsa stain, (Merck, Darmstadt, Germany, cat. no. 1.09204.0500). Dissolve 5 mL in 100 mL PBS, pH 7.2 and filter before use. 5. Routine microscope with phase contrast (PC) illuminator and the following objectives: 10× (phase-contrast), 40× (phase-contrast), and 50× (brightfield-dry) for slide evaluation and preliminary analysis.

2.3. G-Banding and FISH 1. 2. 3. 4. 5.

Image analysis system for G-banding and FISH (see Note 1). Laboratory oven for slide aging (G-banding) or slide drying (FISH). 100-mL Coplin jars (glass) for staining and washing. 4X SSC: 35.1 g NaCl, 17.7 g NaCitrate, made up to 1 L. Adjust to pH 7.2. 0.5X SSC, 2X SSC, etc.; for example dilute from 4X SSC stock but monitor pH.

2.4. FISH Only 1. Ethanol: absolute, 90%, 70%. May be used twice and then discarded. 2. Pepsin stock solution: dissolve 250 mg pepsin (Sigma P7012) in 12.5 mL deionized H2O. Freeze 500-mL aliquots (–20°C) and store for up to 6 mo. 3. Pepsin working solution: dilute 500 mL stock solution in 100 mL deionized H2O containing 1 mL 1 N HCl. 4. Formaldehyde solution: 1% formaldehyde in PBS, pH 7.2, containing 50 mM MgCl2. 5. Acetone, for use in mild pretreatment. 6. Hybridization buffer: Hybrizol VII (Qbiogene, Heidelberg, Germany). Store at room temperature (contains formamide). 7. Cold competitor DNA for prehybridization with probes containing repeat sequences: 1 mg/mL Cot-1 DNA (Roche, Mannheim, Germany); store at –20°C. 8. Nail varnish (clear). 9. Rubber cement. 10. Hybridization chamber: sealed container with an internal shelf to separate slides (above) from humidifier, for example, water-impregnated towels. 11. Hybridization bed: prewarmed freezer block kept in incubator at 37°C. Use during application of probes to slides. 12. Wash solution: 4X SSC with 0.1% Tween-20, molecular biology grade (Sigma). Slides may be placed in wash solution between any steps to prevent drying out. 13. Plastic cover slips for probe detection (Qbiogene). 14. Mounting medium: dissolve 50 ng/mL 4',6-Diamidino-2-phenylindole dihydrochloride (DAPI) in Vectashield antifade mounting medium (Alexis, Grünberg, Germany). 15. Cover slips: glass, grade 0, 22 × 60 mm.

62

MacLeod and Drexler

16. Chromosome painting probes: store at –20°C unless otherwise stated. (see Note 2). 17. Research microscope with the following brightfield objectives with numerical apertures as high as budgetary limitations permit 10×, 63× (fluorescence), 63× (Planapochromatic). Ideally, a cytogenetics research microscope should be equipped with an automatic filter wheel and configured to an appropriate FISH imaging system (see Note 1).

3. Methods

3.1. Harvesting and Slide Preparation Human cells in continuous culture divide typically every one-to-three days, though exceptions at both ends are not uncommon. The mitotic metaphase is the only stage throughout the cell cycle at which chromosomes are clearly visible. This phase lasts but an hour or less, severely reducing the number of cells open to conventional cytogenetic analysis. The metaphase fraction must be enriched accordingly by exposure of the growing cultures to colcemid or, more rarely, to some other mitotic blocking agent for a few hours, or longer in the case of slow growing cells (see Note 3). It is therefore important to ensure that cell cultures are in their logarithmic growth phase by feeding and, if necessary diluting/seeding out. Neglect of this simple precaution is a common cause of failed harvests. It is difficult to overemphasize just how crucial initial harvesting and slide preparation are to subsequent success with both G-banding (see Subheading 3.2.) and FISH (see Subheading 3.3. and Note 4). Harvesting is often the step least rewarded by success. For unknown reasons, some acute leukemia cell line derivates resist successful harvesting. Furthermore, a hypotonic treatment that consistently yields good preparations with one cell line may be totally unsuitable for another cell line of similar derivation. This inconvenient problem precludes use of standard harvesting protocols applicable to all cell lines, unlike DNA preparation. It is therefore necessary to ascertain empirically which harvesting procedure is optimal for each cell line by trial and error. This is achieved by harvesting in parallel cell-aliquots that have been exposed to a range of hypotonic conditions, for example, by varying buffers, the duration of incubation, and temperatures. Continuous cell lines permit the luxury of repetition, but we must take full advantage of it. Cytogenetic harvesting is exquisitely sensitive to the biological variability inherent in living systems and must often be repeated several times until satisfactory results are achieved. Fixation, on the other hand, is amenable to standardization. Once fixed, cells may be stored for a few years at –20°C until required for G-banding or FISH. Immediately prior to slide making, cell suspensions should be washed in fixative. Slide making is performed by dropping suspension onto ice-cold, “squeaky-clean” slides held at a slight incline atop a prefrozen (–20°C) freezer cold-block. Two drops aimed at the slide region immediately under the frosted zone and at the lower-middle, respectively, should result in figure-eight spreading patterns that facilitate both G-banding and FISH. Once completed, slides may be stored for a few years (at –80°C), aged briefly at room temperature for FISH, or aged overnight at 60°C for G-banding. 1. Add colcemid to growing cultures for 2–4 h. 2. Optional: incubate overnight with FUDR to improve chromosome morphology (see Note 5).


63

3. Suspension culture: Aliquot (for example, 4× in 10-mL tubes), centrifuge (5 min at 400g), and discard supernatant. Adherent culture: Shake vigorously to remove mitoses and retain supernatant in centrifuge tube (50 mL). Meanwhile, rinse remaining adherent cells with serum free medium or PBS and discard wash. Add sufficient trypsin/EDTA to cover the cells and incubate briefly (5–15 min) with intermittent light agitation. When cells are ready (i.e., “rounded up”) shake vigorously and remove cells by rinsing with supernate from the centrifuge tube. Then centrifuge aliquots as with suspension cultures. (The serum present in the culture medium will act to inactivate residual trypsin activity.) 4. Resuspend centrifugates gently by manual agitation. Add 5–20 vol from various working hypotonic solutions (for example, 20/1, 1/1). Incubate paired aliquots at room temperature (initially) for 1 min and 7 min, respectively (Table 1). 5. Centrifuge and discard supernate. Resuspend gently and carefully add ice-cold fixative, at first dropwise, then increase amount to almost fill tube. 6. Store refrigated for >1 h. 7. Equilibrate to room temperature (to minimize clumping), then centrifuge (5 min at 400g). Repeat. 8. Store overnight at 4°C. 9. Next day, equilibrate to room temperature, then centrifuge (5 min at 400g). Repeat twice. 10. Resuspend in sufficient fixative, adjusting the volume to yield a lightly opaque suspension. 11. Remove four precleaned slides (one per harvest tube) from storage at (–20°C) and place on a plastic-covered freezer-block held at a slight incline away from operator (by insertion of a pipet, for example). 12. Locally humidify by breathing heavily on slides. 13. From a height of 30 cm place two drops of suspension onto each slide, the first immediately below the frosted zone, the second about two-thirds along the slide. Do not flood with fixative (see Notes 6 and 7). 14. Lift slides in pairs for speed. Breathe on slide again to maximize spreading. 15. Optional: to improve spreading, gently ignite residual fixative with a camping stove or Bunsen burner. Do not allow slide to get hot as this may spoil subsequent G-banding and FISH. 16. Label and air dry: allow slides to stand almost vertical until dry. 17. Examine slides by phase-contrast microscopy and assess each hypotonic treatment individually (see Note 3). 18. Prepare slides from successful treatments, mixing suspensions if more than one is deemed adequate. Label. 19. Store unused suspension at (–20°C).

3.2. Trypsin G-Banding (GTG-Banding) Although a number of banding methods are available, the most popular is G-banding by trypsin pretreatment (20). This method selectively depletes the chromatin of certain proteins to produce strong lateral bands after staining with Giemsa (Fig. 1A). Analysis of chromosomes harvested using the technique described in Subheading 3.1. should typically reveal approx 300 bands, although with stretched or submaximally condensed (prometaphase) chromosome preparations, over 1000 bands may be

64

Table 1 Data Sheet for Determining Optimal Hypotonic Conditions for Harvesting Cell Lines

64 Data are those of an actual experiment, the harvesting of cells from the RS4;11 cell line, processed to prepare the G-banding and FISH slides images shown in Fig. 1. Abbreviations: Col., colcemid; MI, mitotic index; Spr., spreading; Qual., quality. Explanations:

MacLeod and Drexler

1. Tube/Harvest: to avoid subsequent confusion, it is essential to identify each harvest that in turn is prepared by mixing labeled tubes yielding acceptable preparations. 2. Both the time of exposure to colcemid, and the concentrations of colcemid and hypotonic buffers (if nonstandard) should be noted for future reference. 3. Both the temperature and duration of hypotonic treatments are crucial and should be recorded. 4. Results: to assess the efficacy of harvest conditions, it is necessary to compare their relative efficiencies in yielding metaphases (MI), which are well spread without excessive breakage (Spr.) and in which chromosome morphology is satisfactory (Qual.). 5. Quantities of slides and suspensions: indicates what should be done with suspensions from each harvest tube (e.g., mixing for slidemaking and/or storage) and how many slides are to be prepared for G-banding (GTG), solid staining (Giemsa), and FISH. 6. Store: here may be indicated whether any of the harvest tubes/mixtures are suitable for storage as suspensions at (–20°C). 7. Action: decisions regarding the need for repeating the harvest and, if so, how may be written in this box. In the case of RS4;11, the first harvest was deemed adequate.


65

observed. With the advent of FISH, the need for high resolution banding is less obvious, at least in cancer cytogenetics where analysis with BAC clones is simpler and more informative. In fact, by obscuring their salient points of recognition, high resolution banding may even hamper analysis, unless performed by experts. As a rule of thumb, with G-banding alone, it is possible to detect, if not fully characterize, most chromosome rearrangements present in cell lines carrying up to about a half-dozen separate changes. Where unbalanced translocations predominate, as is the case among epithelial solid tumors, all but superficial analysis will most probably require additional chromosome painting. 1. Fresh slides are unsuitable for immediate G-banding. Slides must be first aged by baking overnight at 60°C (see Note 8). Approximately six to eight slides that contain a sufficient supply of well-spread metaphases with adequate chromosome morphology should be prepared for each cell line. 2. Prepare in advance three Coplin jars containing: 500 µL trypsin in 70 mL PBS, pH 7.2, ice-cold PBS, pH 6.8, to stop enzymic activity, and 5% Giemsa in PBS, pH 6.8. 3. The Coplin jar, containing trypsin in PBS should be placed in a water bath at 37°C beforehand and not used until the internal temperature has equilibrated. 4. To determine optimal trypsin incubation times, dip the first slide halfway into the trypsin for 10 seconds (s) and the whole slide for the remaining 10 s to test, in this case, for 10- and 20-s trypsin times simultaneously on one slide. 5. Immediatedly stop trypsin activity by immersion in cold PBS for a few seconds. 6. Stain in Giemsa solution for 15 min. 7. Rinse briefly in de-ionized H2O and carefully blot dry using paper towels (as used for Southern blotting). 8. Examine microscopically (see Note 9). Scan for likely metaphases at low power. Examine those selected at higher power using the Epiplan dry objective. From the chromosome banding quality, decide whether the suitable trypsin time lies within the 10- to 20-s range spanned by the test slide. If satisfactory, repeat Subheading 3.2., steps 1–7. If unsatisfactory, repeat steps 1–8 using longer (30–45 s) or shorter (3–6 s) typsin test times, as appropriate until the optimal incubation time becomes apparent.

3.3. FISH Chromosome painting aptly describes the FISH application using libraries of probes that hybridize to the entire length or large regions of specific chromosomes (see Fig. 1B). In contrast to single-locus probes, painting probes comprise DNA sequences from multiple loci, none of which need be specified. Painting probes may be used singly or in combinations—the latter maximizing the informational possibilities, for example, by confirming a translocation inferred by G-banding. Whichever probe combination is adopted, it is usually necessary to counterstain the chromosomes. The standard counterstain is 4',6'-diamidino-2-phenylindole hydrochloride (DAPI), which yields a deep blue color more intense at the centromeric heterochromatin, in particular that of chromosomes 1, 9, and 16 and in the terminal long-arm region of the Y-chromosome. In better preparations, DAPI generates negative G-bands, which with the aid of most image analysis programs may be readily converted into G-bands, albeit rather faint ones. (Although propidium iodide which stains chromosomes an intense red is sometimes used as a counterstain, it has been largely replaced by DAPI for this reason.)

66

66

MacLeod and Drexler


67

Fig. 1. Cytogenetic characterization of a human leukemia cell line (RS 4;11). G-banding karyogram and FISH analysis of a cell line (RS4;11) established from a 32-year-old female patient with acute lymphoblastic leukemia (ALL) at relapse (26). The ISCN karyotype (27) of the cell depicted in the karyogram (A) was as follows: 47/ 48X/XX,t(4;11)(q21;q23),i(7)(q10),+8,+18, the rearranged chromosomes being indicated by arrows. In this case G-banding revealed the presence of an unambiguous primary change known to be recurrent in ALL, a balanced, reciprocal translocation, t(4;11), whereby most of the long-arm of chromosome 4 (breakpoint at band 4q21) is exchanged with the subterminal long-arm region of chromosome 11 (breakpoint at 11q23). This rearrangement is associated with poor prognosis (2) and may in some cased be induced by treatment for a previous malignancy. The accompanying structural change, an isochromosome for the long arm of chromosome 7, i(7q), was described at early passage (26) and probably arose in vivo, being a common secondary change in ALL (2). The numerical changes, additional copies of chromosomes 8 and 18, may have arisen in vivo or be in vitro artefacts. Interestingly, another t(4;11) cell line, MV4;11, also carries additional copies of chr. 8 and 18 (28), an otherwise rare combination, suggesting either that cells with this translocation may be predisposed to both trisomies, or that this combination favors growth in vitro. The cell depicted represents one of two major subclones, the one that lacks one of two X chromosomes. Loss of the second X chromosome (Y in males) is rather common in tumor cell lines and is also known as an age-related change in vivo. With the excepton of the trisomies (chr. 8 and 18), this karyotype is almost identical to that described in the original report. The FISH images (B,C) show metaphase chromosome preparations hybridized with painting and single-locus probes, respectively. In both cases, preparations were counterstained with DAPI, which generates intense signals at all centromeric regions as a result of the presence of satellite DNA that preferentially binds DAPI. (Continued on next page.)

67

68

MacLeod and Drexler

Fig. 1. (Continued from previous page.) The FISH image (B) depicts chromosome painting with a chr. 7 library probe directly labeled with red fluor (Qbiogene). Note the intense signals from the centromeric satellite sequences present on both the normal 7 (N7) and i(7q). Isochromosomes serve to increase relative copy numbers of long-arm regions at the expense of shortarm regions, or vice versa. The FISH image (C) shows the results of hybridizing metaphase cells from RS4;11 with a commercial DNA probe (Qbiogene) designed to detect translocations occurring within the consensus breakpoint region of the MLL gene at chromosome 11q23. The MLL probe is labeled with digoxigenin-11-dUTP and detected by one round of incubation with antidigoxigenin-FITC (Roche). Note the strong signal yielded by the unrearranged MLL present on the normal 11, while both der(4) and der(11) partners display weaker signals resulting from splitting. In this case, the FISH data are consistent with that of the G-banding and confirm that the MLL gene is a target of the t(4;11). These data support the conclusions that RS4;11 is both authentic and an appropriate model for ALL with t(4;11) and would, therefore, be a suitable resource for studying molecular changes therein, for example, breakpoint cloning and sequencing. MLL is a promiscuous gene, not only partnering AF4 at 4q21, as exemplified by RS4;11, but several other genes as well, including AF9 at 9p22 in t(9;11)(p22;q23) found in acute myeloid leukemia (AML-M5a) and represented by several cell lines, e.g., Mono-Mac-6 (29) and in cryptic form in MOLM-13/14 (30). In each case, gene fusion results in formation of a chimeric mRNA that is translated into a novel protein. In addition to providing in vitro models for their respective tumors of origin, cell lines with recurrent translocations provide infinitely renewable resources of DNA to be used as positive controls for PCR diagnosis.

68


69

Painting probes may be produced by PCR amplification of human chromosomal material retained by monochromosomal human/rodent-hybrid cell lines. By exploiting human specific repeat sequences (for example, Alu) as primer targets it is possible to amplify human DNA selectively. Such probes inevitably include significant amounts of human repeat DNA, hybridizing indiscriminately across the genome, and must be suppressed. This is achieved by preincubating probe material together with unlabeled (“cold”) human DNA enriched for repetitive sequences by a two-step denaturationrenaturation process. During renaturation the most highly repetitive sequences (Cot-1 DNA) are the first to reanneal, allowing more complex, slower reannealing DNA to be digested away using single-strand-specific DNase. For this reason, most commercial painting probes include Cot-1 DNA. Single-locus probes may be produced by labeling large insert clones and are available commercially for a variety of neoplastic loci. FISH, using a commercial probe covering the MLL locus at chromosome 11q23 is depicted in Fig. 1C. However, such probes are costly and limited in coverage. New probes may be identified via genome browsers (for example, Ensembl) and ordered from a suitable resource center. An important class of single locus probes hybridize to chromosomearm specific sequences present in the subtelomeric chromosome regions, which are favored sites of translocation and may be targets for instability, “jumping translocation” (9). Unlike single-locus cDNA probes prepared by reverse transcription of specific mRNA containing no repeat sequences, large insert clones invariably contain repeat sequences requiring suppression by prehybridization with Cot-1 DNA. The critical step in FISH is the post-hybridization stringency wash that may be performed at either low temperatures using formamide, which lowers the stability of the DNA double-helix, or at higher temperatures using low SSC concentrations alone. Stringency washing allows the operator to control the balance of probe signal intensity against background. The stability of DNA-DNA hybrids on FISH slides allows repeated cycles of stringency washing. When starting with untested FISH probes, it is feasible to start off using a less stringent wash which, if yielding unacceptable background levels, may be repeated at higher stringencies (i.e., at lower SSC concentrations) (see Notes 10 and 11). The following steps describe a basic but flexible FISH protocol, applicable to a wide variety of probes and, therefore, useful for those intending to combine probes from different sources, i.e., for experiments with the highest informational value. FISH experiments performed with single commercial probes should typically be performed according to manufacturers’ protocols, although they are unlikely to differ substantially from that presented here (see Notes 12–17) Indirectly labeled probes, e.g., with digoxogenin or biotin, require additional detection steps that may be plugged into the following protocol. 1. Slides: use either fresh (1- to 7-d-old) or archival slides stored at –80°C. 2. Optional: to reduce background signal, preincubate in pepsin solution for 2 min at 37°C (see Note 10). 3. Slide dehydration: pass slides through an alcohol series, 2 min in 70% (×2), 90% (×2), and 100% ethanol in Coplin jars.

70

MacLeod and Drexler

4. Dry overnight at 42°C. 5. Deproteinize in acetone for 10 min (to minimize background autofluorescence). 6. Slide denaturation: 2 min at 72°C in 30 mL 2X SSC plus 70 mL formamide. The temperature of this step is critical. Therefore, avoid denaturing too many slides simultaneously. If a high throughput is desired, slides should be prewarmed. Quench in prechilled (–20°C) 70% ethanol for 2 min. 7. Repeat step 3 (alcohol series). 8. Varnish slide label (to prevent subsequent eradication). 9. Place slide on prewarmed block at 37°C. 10 Remove probe from freezer, noting the concentration of labeled DNA. Add excess Cot-1 DNA (20–50X probe). 11. Probe denaturation: pipet desired volume of probe into microfuge tube (sterile) and incubate in a “floater” for 5 min at 72°C in waterbath. (NB: If recommended by manufacturer, omit probe denaturation.) 12. Probe prehybridization: collect probe by brief centrifugation, then incubate for 15–60 min at 37°C in a second water bath. 13. Probe application: using shortened micropipet tips (sterile) carefully drop 8–12 µL of probe (making up the volume with Hybrizol, if necessary) onto each slide-half. Two hybridizations may be performed on each slide (separated by a drop of Hybrizol, to inhibit mixing). Cover slides carefully with glass coverslips, tapping out any bubbles, and seal with rubber cement. 14. Hybridization: place slides carefully in moistened and sealed hybridization chamber. Leave overnight (or for up to 72 h) in incubator (preferably humidified) at 37°C. 15. After hybridization carefully remove rubber cement and coverslips in 2X SSC using forceps. 16. Stringency washing: wash slides for 5 min at 72°C in 0.5X SSC (see Notes 10 and 11). 17. Optional, for use with digoxigenin labeled probes: briefly prewash in wash solution at room temperature and shake the excess wash free. Important: Do not allow slides to dry out until dehydration step 18. To each slide apply 40 µL antidigoxigenin antibody haptenized with fluorescein-isothiocyanate (FITC) (Qbiogene, Heidelberg, Germany) and cover with plastic coverslip. Incubate for 15–30 min at 37°C in hybridization chamber. Wash for 5 min (×3) in wash solution at room temperature in subdued light. 18. Dehydration (alcohol series): as in step 3 but performed in subdued light. 19. Mounting and sealing: using abbreviated micropipet tips, carefully place 3 drops DAPI/ Vectashield mountant, with each drop containing approx 30 µL, along the slide. Apply coverslip and tap out any large bubbles using the blunt end of a pencil or equivalent. Seal with nail varnish. Allow varnish to dry. 20. Visualization: slides should be visualized at high power under oil immersion with a ×63 objective with a high numerical aperture. Although Zeiss supplies an immersion oil specially designed for fluorescent microscopy (518F), its propensity to floculate spontaneously and at low temperatures renders it unsuitable for routine application to slides stored at 4°C.

4. Notes 1. Performing image analysis onscreen greatly facilitates both speed and accuracy. The ability to position homologs side-by-side and to flip them at a mouse-click assists dissection of unresolved (marker) chromosomes. Karyograms may be subsequently printed with comparable ease, eliminating the need for laborious cut and paste routines. FISH imaging


2.

3.

4.

5.

71

systems are available from several manufacturers, based either on PC or Macintosh platforms. For further information consult the website of Applied Imaging (http:// www.aicorp.com/), which supplies a variety of such systems. Imaging systems confer significant benefits, including amplification of weak signals, merging of differently colored signals together with fiduciary superimposition (if necessary), enhancement of contrast, reduction of background, generation of pseudo G-bands from DAPI counterstain, and rapid documentation and printing. It is seldom possible to resolve all rearrangements present in cancer cell lines, particularly smaller markers lacking recognizable banding patterns. This is where chromosome painting should be used to maximize detail and accuracy. The choice of painting probes is a complicated question. We have had consistently good results with painting and satellite-DNA probes obtained from larger manufacturers. For those using untested probes, it is useful first to calibrate these using normal chromosomes. This effort is usually well invested. Some probes generate unnecessarily bright signals. Knowing this beforehand allows such probes to be “stretched” by dilution with Hybrizol. All too often, probes arrive that yield inadequate or inappropriate signals. Timely identification of such problems by pretesting not only facilitates refund or replacement but may prevent the pursuit of false trails inspired by probes which hybridize to more than one region. Sometimes insufficient metaphases are present on slide preparations. Such slides, though of possible use for G-banding in critical cases, are useless for FISH where probe costs are often critical. For slowly dividing cell lines (doubling times >48 h), colcemid times may be lengthened first to 6 h, then to 17 h (overnight), simultaneously reducing colcemid concentrations by a half to minimize toxicity. However, paucity of metaphases is usually a result of depletion by overly harsh hypotonic treatments. Contrary to most published protocols, we find that reducing hypotonic exposures to 1 min and, if necessary, performing this step in microfuge tubes to facilitate speedy centrifugation to reduce total hypotonic times still further, is often effective. The ideal slides for analysis should fulfill three criteria: a sufficiency of metaphases to enable analysis without wasteful repetition, adequate chromosome spreading—sufficient to minimize overlapping without undue breakage, and good morphology, i.e., large but undistended chromatids lying in parallel. To document progress in harvesting procedures and aid evidence-based searches for their improvement, we use a standard data sheet that records progress towards these ideals. An actual example is shown in Table 1, which presents harvesting data for the cell line RS4;11, the subsequent G-banding and FISH analysis, which are presented in Figs. 1 A–C. In this case, reasonable preparations were obtained at the first attempt using the standard protocol (Subheading 3.1., step 4). Although all four hypotonic combinations yielded adequate numbers of metaphases (A), only tubes a–c yielded satisfactory spreading, i.e., a mixture of well-spread and overspread chromosomes (A/AA), and chromosome morphology (B+), and were subsequently mixed prior to slide preparation. A total of 11 slides were prepared: 6 for G-banding, 1 for Giemsa staining alone (to check for presence of small chromosomal elements which Gbanding sometimes render invisible), and 4 for FISH. In addition, remaining cell suspension in fixative was stored (–20°C) for future use. Chromosome morphology is often correlated with spreading and improvements may be effected using the same methods. As a general rule, the best morphologies are produced by hypotonics containing 50% or less NaCitrate. Excessive amounts of the latter tend to yield fuzzy irrregular morphologies that produce disappointing results with G-banding and FISH alike. Some types of cell, and derived cell lines alike, consistently yield short

72

6.

7.

8.

9.

10.

11.

12.

MacLeod and Drexler stubby chromosomes that appear refractory to all attempts at improvement, for example, acute lymphoblastic leukemia. In such cases, it may be helpful to try FUDR pretreatment. Accordingly, treat cultures overnight with FUDR/uridine. Next morning, resuspend in fresh medium with added thymidine to reverse the blockade and harvest 7 to 9 h later. Insufficient spreading results in tight metaphases with an excess of overlapping chromosomes: such cells may be amenable to FISH but are useless for G-banding. In such cases spreading may be improved by harsher hypotonic treatment, whether by increasing the proportion of KCl to 100%, by increasing the hypotonic time up to 15 min, or by performing the latter at 37°C instead of room temperature (RT). However, paradoxically, many cell lines yield their best spreading at 1 min indicating how little we understand the underlying biological processes involved. Gentle flaming often assists spreading and has minimal effect on G-banding or FISH. In our experience, “dropping from a height” yields only minor improvement in spreading, though heavy breathing, performed both immediately before and after dropping, is beneficial, presumably by increasing local humidity levels. Excessive spreading, on the other hand, is often cured by reducing the proportion of KCl, or by reducing hypotonic treatment times, or by retaining more of the original medium from the first centrifugation (Subheading 3.1., step 3). As a general rule, good chromosomes yield good G-banding results. Exceptions include chromosomes which are too “young” (puffed up or faint banding) or “over the top” (poor contrast or dark banding). Artificial aging by baking overnight at 60°C speeds up results and eliminates variations in optimal trypsin times resulting from climatic or seasonal variations in temperature or humidity. Accurate chromosome analysis based on G-banding lies at the center of cancer cytogenetics. The ability to recognize each of the 24 normal human chromosome homologues must precede analysis of rearrangements. Because the majority of human cancer cell lines carry chromosome rearrangements, the choice of cell lines for learning purposes is critical. Learning should be performed using either primary cultures of normal unaffected individuals, e.g., lymphocyte cultures or B-lymphoblastoid cell lines known to have retained their diploid character. Individuals intent on acquiring the ability to perform karyotyping are strongly advised to spend some time in a laboratory where such skills are practised daily, for example, a routine diagnostic laboratory. The main problem commonly encountered when using FISH probes is weak signal intensity. This may arise because the probe itself is inherently weak, the wash too stringent, or the chromosomes insufficiently denatured. To test for these scenarios, repeat the stringency wash (Subheading 3.3, step 16) but with either 2X or 1X SSC in the wash buffer. In parallel, repeat the slide denaturation (Subheading 3.3., step 6) increasing the denaturation time to 4 min. When neither alteration brings improvement, and the probe is new and untested or old and infrequently used, it is likely that the probe is weak. For those equipped with advanced imaging systems incorporating a camera of high sensitivity, it is often possible to capture images from probe signals invisible to the naked eye. In the case of new commercial probes, the supplier should be contacted. On the other hand, FISH experiments are sometimes plagued by high background signal, or “noise”. Commercial probes are usually, relatively free from this problem. Increasing the wash stringency (Subheading 3.3., step 16) by reducing the SSC concentration to 0.1X may help. Alternately, adding Cot-1 DNA to the hybridization mix may help to reduce hybridization noise. Among non-commercial probes, excessive noise may be cured by reducing the probe concentration. Normal DNA concentrations for single-locus probes


13.

14.

15.

16.

73

should range from 2–6 ng / µL up to 10–20 ng / µL for painting probes. Nonspecific noise caused by either autofluorescence or protein-protein binding after antibody staining may be reduced by additional slide pretreatment by incubation in pepsin solution.(Subheading 3.3., step 2). Incubate slides for 2 min in acidified pepsin solution at 37°C. Rinse in PBS (pH 7.2) for 3 min at RT. Postfix slides, held flat, in 1% formaldehyde solution for 10 min at RT using plastic cover slips. Rinse in PBS (pH 7.2) for 3 min at RT. Continue with Subheading 3.3., step 3) Probes with larger targets often cross-hybridize to similar DNA sequences present on other chromosomes. It is important first to identify patterns of cross-hybridization by FISH onto normal chromosomes to avoid confusing the latter as rearrangements. Some resource centers, notably BAC/PAC Resources, list cross-hybridization patterns for their FISH probes. The first aim of FISH performed on cancer cell lines is to characterize those rearrangements of interest that resist analysis by G-banding. This requires both intuition and luck. Clearly, the need for the latter is reduced where G-banding is optimized. The most difficult rearrangements to resolve involve unbalanced-multiple chromosomes. Sometimes, however, originally reciprocal translocations appear unbalanced as a result of loss or additional rearrangement of one partner. In such cases, the identity of the “missing partner” may be determined from among those chromosomes where one or more homologues appear to be missing. Having identified the chromosomal constituents of cryptic rearrangements, the next task is to reconcile FISH with G-banding data enabling breakpoint identification. In cases where chromosome segments are short, or their banding patterns nondescript, this ideal may be difficult. The International System for Chromosome Nomenclature (ISCN) enables almost all rearrangements to be described with minimal ambiguity (27). Quo vadis? Having successfully completed cytogenetic analysis of a tumor cell line to the point of ISCN karyotyping the question arises, what to do with the data? The first question to be addressed is identity: has the cell line in question been karyotyped previously and, if so, does the observed karyotype correspond with that previously reported? In our experience, complete correspondence between cell lines analyzed is rare, even where their identity has been confirmed by DNA fingerprinting. First, among complex karyotypes complete resolution may be unnecessary and is, indeed, rarely achieved. This leaves significant scope for uncertainty and differences in interpretation. ISCN karyotypes are inferior to karyogram images in this regard. Wherever possible consult the original journal or reprint, as photocopies seldom permit reproduction of intermediate tones that are the “devil in the detail” of G-banding. Second, a significant minority of cell lines display the propensity to evolve karyotypically during culture in vitro, .i.e., “instability”. Instability may effect numerical or structural changes. Thus, for reasons that remain obscure, B-lymphoblastoid cell lines often become tetraploid at later passages. Although the effects of tetraploidization may initially appear dramatic, the phenomenon generates few or no genetic imbalances. More insidious are cases where cell lines displaying normal, or near normal, karyotypes at early passage evolve into distinct subclones after separation. Such a cell line is CCRF-CEM, derived from a patient with T-cell acute lymphocytic leukemia (ALL), which has spawned a multitude of subclones—all cytogenetically distinct (12); and, sometimes following cross-contamination events, masquerading under aliases. Those wishing to compare their karyotypes with those derived at the DSMZ may consult either the DSMZ descriptive catalogue (28) or website which features an interactive database facilitating searches (http://www.dsmz.de/).

74

MacLeod and Drexler

17. The second and more important question concerns the neoplastic significance of cytogenetic changes observed in tumor cell lines. Investigators should naturally familiarize themselves with any recurrent changes previously observed in similar tumors. In addition to books (2) and specialist journals (e.g., Blood, Cancer Genetics and Cytogenetics, Cancer Research, Genes Chromosomes Cancer, International Journal of Cancer, Leukemia ) regularly publishing such data, a number of websites are available allowing interactive searches, notably Mitelman’s Database (http://cgap.nci.nih.gov/Chromosomes/Mitelman) The Atlas of Chromosomes in Cancer (http://www.infobiogen.fr/services/chromcancer/), and The Cancer Genome Anatomy Project (http:// www.ncbi.nlm.nih.gov/ncicgap/), provide useful background information. For those confronted by new or only putatively recurrent cytogenetic alterations the question arises whether the change(s) observed in the cell lines are merely stochastic or genuinely neoplastic. For neoplastic candidates, for example, those ascertained by analogy with clinical data, the cell line carrying it provides ideal material for determining the breakpoints at the genomic level by hybridizing with clones chosen from the databases listing them, e.g., BAC-PAC Resources (http://www.chori.org/bacpac/) or Ensembl (http:// www.ensembl.org/Homo_sapiens/). Precise breakpoint data are the first steps towards identifying genes targeted for dysregulation by cytogenetic changes in cancer. 18. Finally, a word to the wise: the literature is littered by all-too-many reports describing recurrent chromosome changes first ascertained in “independent” cell lines which on closer examination turn out to be subclones (16). Always check that cell lines purporting to come from different patients display distinct DNA fingerprints.

Acknowledgments We wish to thank our colleagues, Maren Kaufmann—several of whose suggestions are silently incorporated in the foregoing protocols—for her expert technical work, and Dr. Stefan Nagel for his critical reading of the manuscript. References 1. Drexler, H. G. (2001) The Leukemia-Lymphoma Cell Line Facts Book. Academic Press, San Diego, CA, p. 2. 2. Heim, S., and Mitelman, F. (1995) Cancer Cytogenetics (2nd ed.). Wiley-Liss, New York, NY. 3. Reya, T., Morrison, S. J., Clarke, M. F., and Weissman, I.L. (2001) Stem cells, cancer, and cancer stem cells. Nature 414, 105–111. 4. Drexler, H. G., MacLeod, R. A. F., and Uphoff, C. C. (1999) Leukemia cell lines: in vitro models for the study of Philadelphia chromosome-positive leukemia. Leuk. Res. 23, 207–215. 5. Drexler, H. G., MacLeod, R. A. F., Borkhardt, A., and Janssen, J. W. G. (1995) Recurrent chromosomal translocations and fusion genes in leukemia-lymphoma cell lines. Leukemia 9, 480–500. 6. Marini, P., MacLeod, R. A. F., Treuner, C. et al. (1999) SiMa, a new neuroblastoma cell line combining poor prognostic cytogenetic markers with high adrenergic differentiation. Cancer Genet. Cytogenet. 112, 161–164. 7. Drexler, H. G., Matsuo, Y., and MacLeod, R. A. F. (2000) Continuous hematopoietic cell lines as model systems for leukemia-lymphoma research. Leuk. Res. 24, 881–911. 8. Tosi, S., Giudici, G., Rambaldi, A. et al. (1999) Characterization of the human myeloid leukemia-derived cell line GF-D8 by multiplex fluorescence in situ hybridization,


9.

10. 11. 12.

13. 14. 15. 16. 17.

18. 19. 20. 21.

22. 23.

24.

25. 26.

27.

75

subtelomeric probes, and comparative genomic hybridization. Genes Chromosomes Cancer 24, 213–221. MacLeod, R. A. F., Spitzer, D., Bar-Am, I., et al. (2000) Karyotypic dissection of Hodgkin’s disease cell lines reveals ectopic subtelomeres and ribosomal DNA at sites of multiple jumping translocations and genomic amplification. Leukemia 14, 1803–1814. Vanasse, G. J., Concannon, P., and Willerford, D. M. (1999) Regulated genomic instability and neoplasia in the lymphoid lineage. Blood 94, 3997–4010. Küppers, R. and Dalla-Favera, R. (2001) Mechanisms of chromosomal translocations in B cell lymphomas. Oncogene 20, 5580–5594. MacLeod, R. A. F., Dirks, W. G., Matsuo, Y., Kaufmann, M., Milch, H., and Drexler, H. G. (1999) Widespread intraspecies cross-contamination of human tumor cell lines arising at source. Int. J. Cancer 83, 555–563. Drexler, H. G., Dirks, W. G., and MacLeod, R. A. F. (1999) False human hematopoietic cell lines: cross-contaminations and misinterpretations. Leukemia 13, 1601–1607. Nelson-Rees, W. A., Daniels, D. W., and Flandermeyer, R. R. (1981) Cross-contamination of cells in culture. Science 212, 446–452. Markovic, O., and Markovic, N. (1998) Cell cross-contamination in cell cultures: the silent and neglected danger. In Vitro Cell Dev. Biol. Anim 34, 1–8. MacLeod, R. A. F., Dirks, W. G., and Drexler, H. G. (2002) Persistent use of misidentified cell lines and its prevention. Genes Chromosomes Cancer 33, 103–105. Stacey, G. N., Masters, J. R. W., Hay, R. J., Drexler, H. G., MacLeod, R. A. F., and Freshney, R. I. (2000) Cell contamination leads to inaccurate data: We must take action now. Nature 403, 356. Caspersson, T., Zech, L., and Johansson, C. (1970) Differential binding of alkylating fluorochromes in human chromosomes. Exp. Cell Res 60, 315–319. Sumner, A. T., Evans, H. J., and Buckland, R. A. (1971) New technique for distinguishing between human chromosomes. Nat. New Biol 232, 31–32. Seabright, M. (1973) Improvement of trypsin method for banding chromosomes. Lancet 1, 1249–1250. Rowley, J. D. (1973) A new consistent chromosomal abnormality in chronic myelogenous leukaemia identified by quinacrine fluorescence and Giemsa staining. Nature 243, 290–293. Nowell, P. C. and Hungerford, D. A. (1960) A minute chromosome in human granulocytic leukemia. Science 132, 1497. Cremer, T., Lichter, P., Borden, J., Ward, D. C., and Manuelidis, L. (1988) Detection of chromosome aberrations in metaphase and interphase tumor cells by in situ hybridization using chromosome-specific library probes. Hum. Genet. 80, 235–246. Lichter, P., Cremer, T., Borden, J., Manuelidis, L., and Ward, D. C. (1988) Delineation of individual human chromosomes in metaphase and interphase cells by in situ suppression hybridization using recombinant DNA libraries. Hum. Genet. 80, 224–234. Lichter, P. (1997) Multicolor FISHing: what’s the catch? Trends Genet. 12, 475–479. Stong, R. C., Korsmeyer, S. J., Parkin, J. L., Arthur, D. C., and Kersey, J. H. (1985) Human acute leukemia cell line with the t(4;11) chromosomal rearrangement exhibits B lineage and monocytic characteristics. Blood 65, 21–31. ISCN (1985) An International System for Human Cytogenetic Nomenclature: Report of the Standing Committee on Human Cytogenetic Nomenclature. Birth Defects Orig. Artic. Ser. 21, 1–117.

76

MacLeod and Drexler

28. Drexler, H. G., Dirks, W., MacLeod, R. A. F., Quentmeier, H., Steube, K. G., and Uphoff, C. C. (2001) DSMZ Catalogue of Human and Animal Cell Lines (8th ed.). Braunschweig, Germany. 29. MacLeod, R. A. F., Voges, M., and Drexler, H. G. (1993) Mono Mac 6: a mature monoblastic leukemia cell line with t(9;11)(p21;q23). Blood 82, 3221–3222. 30. Matsuo, Y., MacLeod, R. A. F., Uphoff, C. C., et al. (1997) Two acute monocytic leukemia (AML-M5a) cell lines (MOLM-13 and MOLM-14) with interclonal phenotypic heterogeneity showing MLL-AF9 fusion resulting from an occult chromosome insertion, ins(11;9)(q23;p22p23). Leukemia 11, 1469–1477.

Colon Cancer Cell Lines

79

6 Isolation and Culture of Colon Cancer Cell Lines Jae-Gahb Park, Ja-Lok Ku, and So-Yeon Park 1. Introduction Colorectal cancer is the second leading cause of cancer-related death in the United States, and an estimated 148,300 cases will occur in 2002, representing approx 11.5% of all new cancers. In men and women, colorectal cancer incidence declined between the mid-1980s and the mid-1990s and stabilized thereafter (1). In contrast, the incidence in Japan, Korea, and Singapore is rising rapidly, probably resulting from the acquisition of a Western lifestyle (2). The incidence of colorectal cancer increases with advancing age, with the peak incidence at 60–79 yr. Colorectal carcinoma is rare before the age of 40 yr except in individuals with genetic predisposition or a preexisting condition such as inflammatory bowel disease (3). Multiple genetic alterations involving the activation of several oncogenes and the loss of two or more cancer-suppressor genes are essential in the development of various human cancers. The genes related to colorectal carcinogenesis can be divided into two groups on the basis of their presumed function. The first group is involved in cellular signaling pathways, and includes genes such as APC, K-ras, and DCC. The second is involved in maintaining genomic stability, and includes genes such as p53 and mismatch repair genes. Mutations in APC, a tumor suppressor gene, is an early event in sporadic colorectal cancers and underlies familial adenomatous polyposis (FAP). The alterations of mismatch repair genes such as hMSH2, hMLH1, hPMS1, hPMS2, and hMSH6 are responsible for the tumors of hereditary nonpolyposis colorectal cancers (HNPCC) patients and some sporadic colorectal cancers with microsatellite instability (4–6). Cell lines from human colorectal cancers are useful tools in the study of cell biology and in the development and testing of new therapeutic modalities. A large bank of wellcharacterized cell lines should reflect the diversity of tumor phenotypes and provide adequate models for tumor heterogeneity. In general, colorectal cancer cell lines are relatively easy to establish. Colorectal carcinoma cell lines can be developed from ascitic effusions, metastatic tissues (regional lymph nodes and distant metastatic sites, such as liver), and primary tumors. The establishment of cell lines from ascitic effuFrom: Methods in Molecular Medicine, vol. 88: Cancer Cell Culture: Methods and Protocols Edited by: S. P. Langdon © Humana Press Inc., Totowa, NJ

79

80

Park, Ku, and Park

sions has proven to be more efficient than establishment from primary tumors because the cancer cells are rich, free floating, and primed for in vitro growth. However, effusions usually contain mesothelial cells and lymphocytes. Mesothelial cells can more readily attach to flasks compared to cancer cells and generally survive for more than one year (7–11). Lymphocytes can inhibit the growth of cancer cells. Enzymatic digestion of solid primary tumor tissues may result in poor recovery of viable cells and overgrowth of cancer cells with contaminating stromal cells. The faster growing stromal fibroblast-like cells easily outgrow and overgrow the cancer cells. The mechanical spill-out method provides a simpler, faster, and less traumatic method of obtaining cells for culture (12). This method allows the minimization of stromal cell contamination because stromal cells are not easily detached from the tissue matrix by mechanical means. Rutzky and Moyer (13) summarized the following features of key relevance for successful culture: (1) nonenzymatic or minimal dissociation of tumor tissue, (2) seeding of cultures as explant and at high cell densities, (3) removal of contaminating fibroblasts usually after they have aided culture initiation, and (4) delaying passage until high cell densities have been achieved and plating cells at high density. In this section, we describe the culture of primary colorectal cancer cell lines, and include detailed protocols relating to establishment from ascitic effusions and primary tumor tissues using mechanical spill-out, the isolation of pure cancer cells, and the maintenance, propagation, and preservation of cancer cells. Our laboratory has extensive experience with serum-containing and fully defined media for the establishment of continuous cell lines derived from colon cancers. Most of our colon cancer cells were initially cultured in ACL-4 medium supplemented with 5% heat-inactivated (fetal bovine serum) FBS (AR5). ACL-4 is a fully defined medium formulated for the selective growth of human lung adenocarcinoma cells and has proved useful in the establishment of colorectal cancer cell lines (7,11,14,15). ACL-4 is a complex medium, consisting of four of the five HITES additives. HITES medium is used for the selective growth of small cell lung cancer (SCLC) and contains insulin, transferrin, hydrocortisone, estradiol, and selenium added to a basal medium, RPMI-1640. The ACL-4 medium lacks the estradiol component of the HITES medium. Epidermal growth factor (EGF) is also present. BSA helps to compensate for some of the high molecular weight proteins present in serum, and aids growth in semisolid media. Triiodothyronine (a selective mitogen), ethanolamine, and phosphorylethanolamine (precursors of membrane lipids), HEPES buffer (to compensate for the loss of buffering properties of serum), glutamine, and sodium pyruvate (added empirically) are also added (12,14,15).

2. Materials

2.1. Initiation Media for Primary Cell Culture 1. RPMI 1640 medium: RPMI 1640 powder, 25 mM HEPES buffer, 20 mM sodium bicarbonate, antibiotics (streptomycin-penicillin, usually 100 U/mL), filter through 0.22 µm bottle top filter. 2. ACL-4 medium: RPMI 1640 as basal medium, 20 µg/mL insulin, 10 µg/mL transferrin, 25 nM sodium selenite, 50 nM hydrocortisone, 1 ng/mL epidermal growth factor, 10 µM


81

ethanolamine, 10 µM phosphorylethanolamine, 100 pM triiodothyronine, 2 mg/mL bovine serum albumin (BSA), 2 mM glutamine, and 0.5 mM sodium pyruvate. 3. Initiation and growth medium (AR-5 medium): ACL-4 medium supplemented with 5% heat-inactivated FBS.

2.2. Reagents and Apparatus 1. 2. 3. 4. 5. 6. 7. 8.

Sterile phosphate buffered saline (PBS), pH 7.0. Sterile 100 mm Petri dishes. Sterile scissors. Sterile forceps. 10-mL pipets. Pasteur pipets. Ficoll gradient. Culture flasks (25 cm2) coated with attachment factors such as collagen and laminin.

3. Methods 3.1. Procurement of Tumor Specimens Solid tumors (primary tumors and tumors in lymph nodes) must be excised carefully and aseptically from pathologically proven colon cancer samples and transferred to a cell culture laboratory in RPMI 1640 medium (see Note 1). The transporting RPMI 1640 medium should contain antibiotics, such as penicillin-streptomycin, to prevent bacterial contamination. Ascitic effusions should be collected in sterile glass bottles or syringes. Heparin (5 µg/mL) may be added to the collected fluids to prevent clotting, if the effusions contain many erythrocytes.

3.2. Primary Cell Culture 3.2.1. Procedure for Solid Tumors 1. Transfer tumor tissues to fresh sterile PBS in a dish and rinse. 2. Transfer tumor tissues to a new dish and dissect off necrotic areas, fatty tissues, blood clots, and connective tissues with forceps and scissors. 3. Finely mince the tumor tissues with sterile scissors. 4. Disassociate tissue pieces into small aggregates by vigorous pipeting with 10 mL of PBS. 5. Allow heavier pieces to sediment by gravity. 6. Carefully harvest the tumor cell aggregates that contain washes by pipet and transfer to a 15-mL sterile centrifuge tube. 7. Centrifuge and remove the supernatant. 8. Wash by resuspending in PBS, centrifuge, and again remove the supernatant. 9. Resuspend the pieces in 5 mL of AR-5 initiation medium. 10. Transfer the pieces to a 25-cm2 flasks. 11. Harvest the remaining large pieces, place in a 15-mL sterile centrifuge tube, centrifuge, remove the supernatant, and culture immediately. 12. Cap the flask and maintain in a humidified incubator at 37°C in an atmosphere of 5% CO2 and 95% air.

3.2.2. Procedure for Ascitic Effusions The processing of ascitic effusions depends on the volume and the cellular content (erythrocytes, mesothelial cells, monocytes, and tumor cells). For specimens with few

82

Park, Ku, and Park

or no erythrocytes, the cells are centrifuged, resuspended in RPMI 1640 medium, and seeded into 25-cm2 flasks. For specimens with large numbers of erythrocytes, the cells are centrifuged and resuspended in RPMI 1640 medium, and cancer cells are isolated by Ficoll gradient. 1. Add 7 mL Ficoll gradient to a 15-mL sterile centrifuge tube. 2. To the 7 mL Ficoll gradient add (carefully layering on top of Ficoll gradient) 7 mL of diluted ascitic fluid using a sterile Pasteur pipet with its tip touching the side of the tube. 3. Centrifuge at 400g for 30–40 min in a tabletop centrifuge at room temperature. 4. Carefully aspirate the upper layer using a clean Pasteur pipet, leaving the cancer cell layer undisturbed at the interface. 5. Using a clean Pasteur pipet, transfer the cancer cell layer to a clean centrifuge tube. 6. The pellets from the gradient usually contain a significant number of tumor aggregates. After a single wash with PBS, resuspend the pellets in PBS and leave standing in a rack at room temperature, to allow heavier cell aggregates to sediment by gravity. After aspirating off the supernatant, which contains most of the erythrocytes, collect the cell aggregates. 7. Add at least 3 vol (6 mL) of PBS to the cancer cells in the centrifuge tube. 8. Suspend the cells by gently drawing them in and out of a Pasteur pipet. 9. Spin the cells at 400g for 10 min, decant the supernatant from the cell pellet, add 10 mL of RPMI 1640, resuspend the cells with a Pasteur pipet, and then spin at 400g for 10 min. Repeat this washing step. 10. Decant the medium and resuspend the cell pellet in 5 mL of AR-5 initiation medium. 11. Seed the cell pellet into 25-cm2 flasks. 12. Cap the flask and maintain the culture in a humidified incubator at 37°C in an atmosphere of 5% CO2 and 95% air.

3.3. Isolation of Cancer Cells Cancer cells can grow as floating aggregates, firmly or loosely adherent colonies, or as both adherent and floating subpopulations (see Note 2). Isolation of the cancer cells is performed when heavy tumor-cell growth is observed. Several methods can be employed to isolate pure cancer cells.

3.3.1. Floating Aggregates If floating aggregated cancer cells are grown in suspension, pure cancer cells can be easily obtained because most of the fibroblasts are attached to the surface of the culture flask. 1. Harvest and transfer the floating aggregates to the sterile centrifuge tube. 2. Spin the cells at 400g for 5 min, decant two-thirds vol of supernatant from the cell pellets, and add 5 mL of ACL-4 medium supplemented with heat-inactivated 5% FBS. 3. Seed the cell pellets into 25-cm2 flasks. 4. Cap the flasks and maintain the culture in a humidified incubator at 37°C in an atmosphere of 5% CO2 and 95% air.

3.3.2. Adherent Colonies RAPPING METHOD: This method is used when cancer cells are loosely attached to the surface of the culture flask and grow as adherent colonies among the stromal fibroblast cells. Of


83

these cancer cells, some cancer cells or whole colonies are detached from the colonies and grow in suspension. 1. 2. 3. 4.

Gently tap the flasks. Harvest the individual cancer cells and colonies. Transfer the floating aggregates to a sterile centrifuge tube. Spin the cells at 400g for 5 min, decant two-thirds vol of supernatant from the pellets and add 5 mL of ACL-4 medium supplemented with 5% FBS. 5. Seed the cell pellet into 25-cm2 flasks. 6. Cap the flask and maintain the culture in a humidified incubator at 37°C in an atmosphere of 5% CO2 and 95% air.

SCRAPING METHOD: Usually, firmly adherent colonies surrounded by stromal fibroblasts form large densely packed colonies that continue to grow laterally, slowly infiltrating and displacing the adjacent fibroblasts or mesothelial cells (see Fig. 1). Eventually, the entire flask may be taken over by these tumor cells. In this case, cancer cells can be isolated by scraping and differential trypsinization (12). In our experiences, when large adherent cancer cell colonies are less impeded by surrounding fibroblasts, scraping is the best way of isolating the cancer cells. The cells are less damaged and stromal contamination is minimized (7,11,12,16,17). 1. Maintain the culture until the adherent colonies form well isolated large colonies (5–10 mm in diameter). This may take several months. 2. Select colonies and mark with marker pen on the flask base. 3. Decant the medium and add 1 mL of growth medium. 4. Detach the adherent colonies by scraping with a policeman or cell scraper, to allow them to float freely in the medium. 5. Add 4 mL of growth medium and harvest the detached colonies with a Pasteur pipet. 6. Transfer the cancer cells into 25 cm2 flasks. 7. Maintain cultures in humidified incubator at 37°C in an atmosphere of 5% CO2 and 95% air.

DIFFERENTIAL TRYPSINIZATION METHOD: Some cancer cells grow among stromal fibroblasts and produce small colonies. Usually these cancer cells do not overgrow the fibroblasts (see Fig. 2). In these cases, the differential trypsinization method is preferred. The method depends on differences in cell susceptibility to trypsinization (12). Some cancer cells are more susceptible to trypsinization than fibroblasts and vice versa. 1. 2. 3. 4.

Decant the medium, rinse with PBS, and remove the PBS by aspirating. Add 1.5 mL of diluted trypsin (0.025%, 0.05%, or 0.1% trypsin) Place into incubator at 37°C for approx 3 min. Observe the flasks under the inverted microscope when they are done incubating, and determine whether the cancer cells or fibroblasts are detached. If both cancer cells and stromal fibroblasts remain attached, incubate the culture flasks until either the cancer cells or fibroblasts detach. 5. If cancer cells have detached and the fibroblasts remain attached, add 5 mL of growth medium containing serum. Harvest the detached cancer cells. If, on the other hand, can-

84

Park, Ku, and Park

Fig. 1. Primary cell culture of primary tumor from colorectal cancer patients.

cer cells remain attached and the fibroblasts have detached, remove the medium, rinse with the growth medium, and then add 5 mL of growth medium. 6. Centrifuge the harvested cancer cells, remove the supernatant, and add 5 mL of AR-5 growth medium. 7. Transfer the cancer cells into 25-cm2 flasks. 8. Maintain cultures in a humidified incubator at 37°C in an atmosphere of 5% CO2 and 95% air.


85

Fig. 2. (A) Before trypsinization. (B) After trypsinization and 1 d later.

3.4. Propagation and Preservation of Cancer Cells After establishing cancer cell lines, initial passages are performed when heavy tumor-cell growth and large colonies are observed. Subsequent passages are performed every week or two. The ACL-4 medium (14,15) supplemented with heat-inactivated 5% FBS (used in primary cell culture) can be used also for the propagation of colorectal cancer cell lines (7,8,10,11). This medium must be used until the isolated

86

Park, Ku, and Park

Fig. 3. SNU-769A colorectal carcinoma cell line. Cancer cells grow as loosely attached and freely floating cell aggregates. Individual cells are round, and no attached cells are noted.

cancer cells are considered a cell line (see Note 3). After the final establishment of cell lines, AR-5 medium can be replaced with RPMI 1640 medium supplemented with 10% heat inactivated FBS (11).

3.4.1. Floating Aggregates Floating cell aggregates grow as loosely attached cell aggregates, in ball-like tightly packed clumps, etc. Loosely attached cell aggregates are subpassaged after dissociation by pipeting (Fig. 3).

3.4.2. Tightly Packed Clumps (Fig. 4) 1. Collect the clumps by pipet and transfer to a sterile centrifuge tube. 2. Spin cells at 400g for 5 min, discard the supernatant from pellets, rinse with sterile PBS, centrifuge, and again remove the supernatant. 3. Add 2 mL of trypsin-EDTA (usually 0.05%) in PBS and incubate at 37°C for approx 3 min. 4. Add 5 mL of RPMI 1640 medium supplemented with 10% FBS and centrifuge. 5. Decant the supernatant and redisperse the cancer cells by pipeting with the growth medium. 6. Seed the cell pellet into 25-cm2 flasks 7. Cap the flask and maintain the cultures in humidified incubators at 37°C in an atmosphere of 5% CO2 and 95% air.

In this case, some cancer cells can be grown as adherent colonies and/or as a monolayer, and other cells can be grown as floating cell aggregates.


87

Fig. 4. SNU-1047 colorectal carcinoma cell line. Cancer cells grow as tightly packed clumps.

Fig. 5. SNU-407 colorectal carcinoma cell line. Cancer cells are polygonal in shape and grow as adherent cells.

3.4.3. Adherent Cells (Fig. 5) 1. 2. 3. 4.

Remove the supernatant and rinse with sterile PBS. Add 2 mL of trypsin-EDTA (usually 0.05%) in PBS and incubate at 37°C for approx 3 min. Add 5 mL of RPMI 1640 medium supplemented with 10% FBS and centrifuge. Decant the supernatant and redisperse the cancer cells by pipeting them with the AR-5 growth medium.

88

Park, Ku, and Park

Fig. 6. SNU-175 colorectal carcinoma cell line. Cancer cells grow as both adherent cells (right) and floating cell aggregates (left).

5. Seed the cell pellet into new 25-cm2 flasks 6. Cap the flasks and maintain the cultures in humidified incubators at 37°C in an atmosphere of 5% CO2 and 95% air. If the adherent cancer cells are not detached in the flasks, the concentrations of trypsin-EDTA and the incubation times can be increased.

3.4.4. Both Adherent and Floating Subpopulations (Fig. 6) 3.4.4.1. FLOATING SUBPOPULATIONS 1. Collect the floating cell aggregates and transfer to sterile centrifuge tubes. 2. Remove the supernatant, and resuspend the cells in the growth medium.

3.4.4.2. ADHERENT SUBPOPULATIONS 1. 2. 3. 4. 5.

Add 2 mL of trypsin-EDTA (usually 0.05%) in PBS and incubate at 37°C for approx 3 min. Add 5 mL of ACL-4 medium supplemented with 5% FBS and centrifuge. Decant the supernatant, and combine the cells with the floating subpopulations. Seed the cell pellet into new 25-cm2 flasks. Cap the flask and maintain the culture in a humidified incubator at 37°C in an atmosphere of 5% CO2 and 95% air.

3.5. Representative Characteristics of Cultured Colon Cancer Cell Lines The SNU-769A cell line was derived from a mucinous adenocarcinoma signet ring cell type (see Fig. 3). The original tumor was composed of singly scattered tumor cells with eccentrically located nuclei and abundant cytoplasmic mucin (Fig. 7).


89

Fig. 7. Primary tumor (mucinous adenocarcinoma of signet ring cell type) of SNU-769A colorectal carcinoma cell line.

The tumor cells did not form glands or acini and showed solid growth pattern with minimal desmoplasia. Among the tumor cells, extracellular mucin pool was also noted. Cells of SNU-769A cell lines grow as loosely attached and freely floating cell aggregates. Individual cells are round, and no attached cells are noted (see Fig. 3). The SNU-1033 cell line was derived from a poorly differentiated adenocarcinoma. The original tumor was characterized by solid pattern of growth with focal glandular differentiation. The majority of tumor cells were cuboidal and showed considerable nuclear pleomorphism (Fig. 8A). Tumor cells of SNU-1033 demonstrate the attached epithelioid morphology and prominent dome formation (Fig. 8B). The SNU-1040 cell line was derived from a well-differentiated adenocarcinoma. The original tumor was characteristically composed of well-formed glands. The tumor cells were columnar to cuboidal and maintained nuclear polarity (Fig. 9A). Cultured tumor cells of SNU-1040 demonstrate the prominent adherent epithelioid cells (Fig. 9B).

4. Notes 1. Whenever possible, invasive areas from the serosal surface should be selected for primary tumor cultures to reduce the possibility of microbial contamination. 2. If the cancer cells are adherent or grow as floating aggregates, the medium is changed weekly until a substantial outgrowth of cells is observed. 3. It is recommended that early passages, whenever passaged, are frozen in cryoprotective medium to prevent loss of the cell lines by contamination or other laboratory accidents.

90

Park, Ku, and Park

Fig. 8. (A) Primary tumor (poorly differentiated adenocarcinoma) of SNU-1033 colorectal carcinoma cell line. (B) Phase contrast microscopy of SNU-1033 colorectal carcinoma cell line.


91

Fig. 9. (A) Primary tumor (well-differentiated adenocarcinoma) of SNU-1040 colorectal carcinoma cell line. (B) Phase contrast microscopy of SNU-1040 colorectal carcinoma cell line.

92

Park, Ku, and Park

References 1. Jemal A., Thomas, A., Murray, T., and Thun, M. (2002) Cancer statistics. CA Cancer J. Clin. 52, 23–47. 2. Honda, T., Kai, I., and Ohi, G. (1999) Fat and dietary fiber intake and colon cancer mortality: a chronological comparison between Japan and the United States. Nutr. Cancer 33, 95–99. 3. Hamilton, S. R., Volgelstein, B., Kudo, S., Riboli, E., Nakamura, S., and Hainaut, P. (2000) Carcinoma of the colon and rectum. In: Hamilton, S. R., Aaltonen, L. (eds.) Pathology and Genetics of Tumors of the Digestive System, IARC Press, Lyon, pp. 105–119. 4. Smith, K. J., Johnson, K. A., Bryan, T. M., et al. (1993) The APC gene product in normal and tumor cells. Proc. Nat. Acad. Sci. USA 90, 2846–2850. 5. Fishel, R., Lescoe, M. K., Rao, M. R. S., et al. (1993) The human mutator gene homolog MSH2 and its association with hereditary nonpolyposis colon cancer. Cell 75, 1027–1038. 6. Kane, M. F., Loda, M., Gaida, G. M., et al. (1997) Methylation of the hMLH1 promoter correlates with lack of expression of hMLH1 in sporadic colon tumors and mismatch repair-defective human tumor cell lines. Cancer Res. 57, 808–811. 7. Park, J. G., Oie, H. K., Sugarbaker, P. H., et al. (1987) Characteristics of cell lines established from human colorectal carcinoma. Cancer Res. 47, 6710–6718. 8. Park, J. G., Yang, H. K., and Hay, R. J. (1994) Colorectal cancer cell lines. In: Hay, R. J., Park, J. G. and Gazdar, A. (eds.) Atlas of Human Cancer Cell Lines, Academic Press, San Diego, pp. 317–341. 9. Sekiguchi, M., and Suzuki, T. (1994) Gastric tumor cell lines. In: Atlas of Human Cancer Cell Lines. Hay, R.J., Park, J. G., and Gazdar, A. (eds.) Academic Press, San Diego, pp. 287–316. 10. Park, J. G., and Gazdar, A. F. (1996) Biology of colorectal and gastric cancer cell lines. J. Cell. Biochem. 24 (suppl ), 131–141. 11. Oh, J. H., Ku, J. L., Yoon, K. A., et al. (1999) Establishment and characterization of colorectal-carcinoma cell lines. Int. J. Cancer 81, 902–910. 12. Oie, H. K., Russell, E. K., Carney, D. N., and Gazdar, A. F. (1996) Cell culture methods for the establishment of the NCI series of lung cancer cell lines. J. Cell. Biochem. 24(suppl.), 24–31. 13. Rutzky, L. P., and Moyer, M. P. (1990) Human cell lines in colon cancer research. In: Moyer, M. P. (ed.) Colon Cancer Cells,Academic Press, London, pp. 155–202. 14. Gazdar, A. F., and Oie, H. K. (1986) Growth of cell lines and clinical specimens of human nonsmall cell lung cancer in a serum-free defined medium. Cancer Res. 46, 6011–6012. 15. Gazdar, A. F., and Oie, H. K. (1986) Cell culture methods for human lung cancer. Cancer Genet. Cytogenet. 19, 5–10. 16. Park, J. G., Frucht, H., LaRocca, R. V., et al. (1990) Characteristics of cell lines established from human gastric carcinoma. Cancer Res. 50, 2773–2780. 17. Park, J. G., Yang, H. K., Kim, W. H., et al. (1997) Establishment and characterization of human gastric carcinoma cell lines. Int. J. Cancer 70, 443–449.

Melanoma Cell Lines

93

7 Isolation and Culture of Melanoma Cell Lines Adam I. Riker 1. Introduction Since the dawn of mankind, there has been cancer. From so simple a beginning, cancer, in all of its forms and complexities, has become the second leading cause of death in the United States. It is responsible for one out of four deaths, and totaled 549,838 (23% of all deaths) for the year 1999 (1). It is estimated that it will surpass cardiovascular disease as the number one killer by the year 2015. For melanoma, the incidence is increasing at an alarming rate. For the year 2002, new melanoma cases will be diagnosed in 53,600 individuals, claiming 7,400 lives (1). We have had limited success in the treatment of advanced stage melanoma with most patients succumbing to death within the first year of diagnosis. There is a renewed hope and effort for the development of successful treatment options for patients with stage IV disease. Over the last decade, researchers and clinicians worldwide continue to make progress in understanding the immunobiology of melanoma, embracing new ideas and insights into the complex interactions that occur within the tumor milieu. It is within this tumor microenvironment where many of the answers to our questions can be found. Thus, to reach this goal, we have developed a very successful method of obtaining and establishing tumor cell lines for in vitro expansion and characterization. This has resulted in a stable supply of reagents for in vitro use that, in turn, can reflect the host/tumor interactions within the in vivo tumor microenvironment. Improved tumor models, an autologous system of reagents, and the establishment of a melanoma tumor (cell line) bank have advanced our knowledge about tumor escape mechanisms, immune cell activation, and the malignant transformation of cells. The ultimate in vitro tumor model would completely reflect the in vivo tumor microenvironment in function and mechanism. It would become the genetic fingerprint for each patient, thus allowing the design of an optimal therapeutic vaccination strategy. It would be a true representation of antigen expression, cell surface receptor density, and genotypic makeup. Unfortunately, such a model does not currently exist. From: Methods in Molecular Medicine, vol. 88: Cancer Cell Culture: Methods and Protocols Edited by: S. P. Langdon © Humana Press Inc., Totowa, NJ

93

94

Riker

Clearly, as the tumor nodule grows, the tumor cells within it exist as a heterogeneous population of cells that are oligoclonal in nature at both the genetic and phenotypic level (2). Each cell, and indeed, each metastatic tumor nodule must be treated as a separate entity when envisioning the development of a vaccination strategy that is to have 100% lethality to all metastatic disease. To overcome this problem, the development of autologous cell lines in vitro provides a small glimpse into the cellular and immunological events that have taken place in vivo. A novel and somewhat unique approach involves the development and characterization of melanoma cell lines established from samples obtained by fine needle aspiration biopsy (FNAB) of subcutaneous lesions in patients with advanced melanoma. There are many melanoma cell lines that are commercially available for any number of in vitro studies. Some are characterized in certain respects, but most only provide a guarantee that they are pure melanoma cell lines without contamination with other cells, such as fibroblasts. Characterization, functional analysis, and clonality of such cell lines are not guaranteed and are usually not addressed. The establishment and analysis of cell lines by techniques such as tumor cell digestion also have inherent faults as a result of the underlying question of whether these cell lines are a true representation of the cell population from which they originated in vivo. Furthermore, contaminating fibroblasts, macrophages, dendritic cells, T cells, and NK cells have all been shown to be present in various numbers in melanoma cell cultures established from tumor cell digests (see Notes 1–5). Fibroblast contamination remains a formidable hurdle even today. The in vitro data obtained from such “integration” between tumor cells and fibroblasts must be looked at with an eye of suspicion. The utility of FNAB as a novel approach to obtain melanoma samples from patients with advanced disease has provided us with a wealth of patient-specific information. Furthermore, the samples obtained can be grown to large numbers in vitro for further characterization and functional analysis (3). The tumor nodule(s) remain for further prospective analysis by serial FNAB before, during, and after therapy. Excisional biopsy of tumors and subsequent expansion of tumor cell lines has been the traditional tool utilized for the analysis of tumor/host interactions. The obvious drawback of this method is that it allows for the evaluation of only a single lesion at a specific time point. The removal of the tumor excludes comparative analysis of the same lesion over time, thus severely limiting our understanding of the natural progression of the neoplastic process and its activity secondary to the immune pressure placed upon it. FNAB of multiple synchronous lesions results in the vital comparison of metastatic nodules from the same patient, characterizing differences in melanoma antigen (MA) and HLA expression, genetic alterations, receptor density, cytokine profile, and other molecular differences.

2. Materials

2.1. Cell Culture 1. Complete media (CM): Iscove’s media (Biofluids Inc., Rockville, MD) supplemented with 10 mM HEPES buffer, 100 U/mL penicillin-streptomycin (Biofluids), 10 g/mL ciprofloxacin (Bayer West Haven, CT) 0.03% L-glutamine (Biofluids), and 0.5 mg/mL of

Melanoma Cell Lines

95

amphotericin B (Mediatech, Cellgro, VA) with 10% heat-inactivated human AB serum (Gemini Bioproducts, Calabasas, CA) (see Note 6). 2. Standard cell culture supplies should be readily available (pipets, culture flasks of all sizes, prepared complete media). The serial expansion of cells will initially require 48-well and 24-well flat bottom culture plates (Costar Inc., Corning, Calabasas, NY), T-25, T-75, T-175 culture plates (Costar Inc.).

2.2. Other Reagents 1. Diff-Quik stain.

3. Methods

3.1. Sample Collection and Culture from FNAB 3.1.1. Procedures and In Vitro Expansion of Melanoma Cells Obtained by FNAB 1. The most important part of collecting samples by FNAB is gaining the necessary experience through supervision by a qualified pathologist or cytopathologist with an expertise in the technique of FNAB. There is a learning curve associated with accurately collecting samples by FNAB, and one is advised to seek the guidance and support of those trained in this area. 2. A 23-gage needle is attached to a 10-mL syringe that rests within a specialized holder (Cameco Medical Limited, London) to facilitate operation with one hand while the other hand stabilizes the lesion to be aspirated. Cleanse the nodule and surrounding areas with alcohol and sterile gloves in order to obtain a sterile sample. 3. If a local anesthetic is to be used, a 1% lidocaine solution (without epinephrine) can be utilized to infiltrate the skin, creating a small wheal subcutaneously. Be careful to not infiltrate the tumor nodule itself, the wheal should be raised on the skin overlying the tumor nodule. In most circumstances, a local anesthetic is not necessary. Patients tolerate FNAB with a 23-gage needle extremely well with minimal discomfort. Remember, by using a local anesthetic and raising a wheal, the anatomy and tissue planes become distorted, making it difficult to localize the needle within the tumor nodule. 4. Once ready to aspirate, stabilize the lesion with the thumb and index finger prior to entering it with the needle. Enter the subcutaneous lesion, ensuring that the bevel of the needle is within the tumor mass. Apply a small amount of suction. 5. Remove and collect the cells while applying continous slight suction to the syringe with the cells remaining within the needle shaft and hub. Collect the cells with a back and forth motion of the syringe, gently changing the angle by 5 to 10 degrees with each forward motion. This will ensure an adequate collection of cells from different areas of the nodule. Be sure to release any suction within the syringe prior to removal of the needle; otherwise, most of the sample is aspirated into the syringe and sprayed on its walls. 6. Place a small sample on several slides and Diff-Quik stain. At the bedside, the sample is evaluated under the microscope to ascertain cellular morphology, degree of cellularity, and adequacy of the sample. An experienced cytopathologist can usually confirm the diagnosis at the bedside. 7. Once an adequate sample is obtained for diagnosis and immunostaining, a second pass is then collected under sterile conditions for in vitro culture. Place the sample into cell culture media at the bedside and take to the laboratory for in vitro culturing and expansion (see Notes 1–7).

96

Riker

3.1.2. In Vitro Culturing and Cellular Expansion 1. A total cell count is performed, including all nucleated and red blood cells (RBC), with final plating into a 24- or 48-well plate at 2–4 ⫻ 106 cells/well. ACK Lysing Buffer (Biofluids) can be used safely in order to lyse the RBCs prior to cell plating. Working without contaminating RBCs seems to be beneficial and there is no evidence that metabolites of lysed RBCs are beneficial for growth of tumor cells . 2. Cultures are maintained by changing media every 3 days (d). Remove half of the media and replace it with fresh media by carefully suctioning off the top portion of the undisturbed cell culture in the 24- or 48-well plate. As the cells grow and expand, they are adherent to the bottom and are trypsinized and split, based on the rapidity of their growth. It is absolutely necessary to keep the cells together within close proximity to each other for optimal cellular interaction and growth (see Note 7). 3. Once the tumor cell line has been properly expanded (meaning at least 10 T-175 flasks), final cellular characterization can then be performed by electron microscopy, karyotyping, receptor and tumor antigen analysis, fluorescence-activated cell scanning (FACS) analysis, and immunocytochemistry (ICC). The remaining flasks are frozen down and placed in liquid nitrogen for later use.

3.1.3. Immunocytochemistry The following monoclonal antibodies are used: W6/32 (Sera Labs, Westbury, NY) for HLA class I; IVA-12 (American Type Culture Collection, Rockville, MD [ATCC]) for HLA class II; KS-I for HLA-A2, fluorescein isothiocyanate (FITC) antihuman CD8 and FITC antihuman CD4 (Pharmingen, San Diego, CA), antiMART-1/MelanA murine IgG2b (M2-7C10 and antigp100 mAbHMB-45 (Enzo Diagnostics, Farmingdale, NY). The secondary antibody is goat antimouse IgG (FITC). ICC is performed on cytospin preparations from the original fine needle aspirate (FNA) sample and on subsequent established cell lines. The cytospins are fixed in acetone and stained with the same mAbs used for the FACS analysis (Biogenex, San Ramon, CA). For secondary staining, biotinylated goat-antimouse IgG (Kirkergaard & Perry Laboratories, Gaithersburg, MD) is used, followed by avidin-biotin-peroxidase (Vectasin Elite Kit, Vector Laboratories, Burlingame, CA). ICC was performed on cytospin preparations from the original FNA sample and on subsequent established cell lines.

3.1.4. Success Rate of Establishing Melanoma Cell Lines in Culture The overall success rate of establishing melanoma cell lines is in the range of 70– 90%. This is a result of meticulous attention to detail, both in terms of obtaining an adequate specimen and in cell culturing techniques. Several cell lines were established from synchronous lesions from the same patient. Each nodule must be treated as a separate entity and cell line. Almost all cell lines grew adherent to the flask bottom. Occasionally, there was evidence of fibroblast overgrowth by 48 h. In general, if the fibroblasts do not grow within the first 48–72 h, serial expansion by tumor cells will eventually lead to a pure melanoma cell culture, with little or no contamination by fibroblasts or other cells. It is important to realize that the established melanoma cell line is probably originating from the clone that has gained a survival advantage, restricting less robust clones from growing. Characterization and functional analysis

Melanoma Cell Lines

97

of the daughter cell lines have been performed for direct comparison to the in vivo tumor microenvironment of the original lesion (see Notes 8–13).

4. Notes 1. The successful establishment and characterization of melanoma cell lines in vitro has been met with a number of difficulties, highlighting the need for improved culture techniques. Traditionally, standard techniques of in vitro cell culture involved obtaining a tissue sample from an excisional biopsy or wide local excision, followed by a variety of processing techniques. Tumor samples are often digested with collagenase and other enzymes, then plated in enriched media. This technique has resulted in a rate of successful establishment of melanoma cell lines of approx 30%, and less for other cell types such as colon and breast cancer. 2. In previous studies, there has been limited success in growing primary uveal and conjunctival melanoma cell lines. Various regimens of processing tumor explants involve the mincing of tumor into 1–3-mm3 chunks followed by placement into enzyme (collagenase, type IV, DNAase, type IV, hyaluronidase, type V)-containing media. Most frequently, the tumor “chunks” are allowed to stir overnight followed by filtering of the tumor cell suspension through a metal mesh filter with plating of the cell suspension in various supplemented media preparations. The growth media for tumor samples of ocular melanoma are highly variable, some utilizing growth factors such as EGF and IGF as well as other components such as phorbol esters and cholera toxin. 3. The most consistent problem with techniques involving a whole specimen is the variety of cells within the sample. Basically, a chunk of tumor contains tumor cells, but it also contains a host of other cells and tissue types as well. Often these tissues outnumber the primary tumor specimen by more than a thousandfold. Fibroblasts and stromal tissue cells are difficult to filter away from the tumor cells, resulting in overgrowth of the primary cell culture and rendering the sample unusable for further analysis. 4. Utilizing a culturing method of straining tumor material through a linen cloth with continuous irrigation with DMEM media, Luyten et al. reported the successful establishment of 2 of 16 (13%) primary uveal cell lines and 3 of 4 (75%) metastatic cell lines (4). McNamara et al. describe a method for the establishment of short term (4–13 wk) conjunctival melanoma cell cultures that allows for the immediate preparation of cell cultures, with cells dividing in vitro within 24 h of receipt of the enucleation specimen (5). 5. Behm et al. showed that multiple aspirations of benign lymph nodes can be performed without scar formation or significant architecture disruption that would affect histologic interpretation (6). Ljung et al. revealed that malignant epithelial cells, in this case, breast cancer cells, are almost exclusively collected (7). Their hypothesis is that tumor cells are less cohesive and, therefore, are easier to dislodge than adjacent stromal cells and benign breast epithelia. Of interest, they further comment that blood elements and lymphocytes may “contaminate” the tumor specimens. 6. Most complete media consists of fetal calf serum (FCS) of various percentages, with others adding horse serum (3%) because of its described ability to support the growth of skin melanocytes (5). However, problems can arise with unwanted antigenic responses against the FCS, thus obviating the use of human AB sera instead. 7. Meticulous cell culture techniques are required to achieve this success rate. Sterile methods must be utilized at every step of growth and cell expansion, to ensure that the media and other reagents, such as IL-2, are changed at least every third day. Complacency with cell culture will result in contamination by fungus, bacteria, or fibroblasts.

98

Riker

8. A major assumption of excisional biopsy specimens placed in vitro for cell culturing is that the tumor represents a homogeneous population of cells representative of other metastatic lesions in vivo from the same patient. It is now well documented that in metastatic melanoma, synchronous lesions are remarkably heterogeneous in their expression of melanoma-associated antigens (MAA) and HLA (8-12). Thus, the evaluation of a single lesion may not represent the full spectrum of synchronous metastatic lesions in terms of functionality and response to therapy. 9. Melanoma cell cultures originating from excisional biopsies can provide useful information regarding tumor/host interactions at only a single time point. Removal of the entire lesion precludes further prospective analysis, and subsequent data obtained from this specimen is thus limited to a retrospective analysis only. Characterization of a lesion from a single point greatly diminishes the potentially crucial information gained by the sequential collection and evaluation of FNA samples of the same lesion over time prior to, during, and after various treatment regimens. 10. It is important to analyze the daughter cell line obtained from the original FNAB in order to determine the similarity between the in vitro antigen expression with that obtained from the original in vivo sample. This can be done by immunocytochemistry (ICC) with measurement of the levels of expression of various tumor antigens, such as gp100, MART-1, and tyrosinase. 11. The daughter cell lines, in the vast majority of cases, can be compared to the original FNAB sample by immunological and molecular methods. In general, there is a strong correlation in melanoma antigen expression between fresh tumor explants and the cultured daughter cell lines. Cell lines generated from metastases with high expression of gp100 were found to have high levels of gp100 by FACS analysis compared to the expression of the same antigens as detected by ICC on freshly explanted tumor cells (3). 12. Occasionally, it was noted that if the fresh tumor explant was positive for gp100, subsequent in vitro culturing of this sample resulted in the loss of this MAA by FACS analysis. This selective pressure is known to occur in vitro, since the loss of these tumor antigens is not essential for the survival of the tumor cell. It is important to remember that MA expression is of little importance to the tumor cell, and bears no relationship to the neoplastic process. Thus, their expression in melanoma cells is a remnant of the melanocytic origin, and its loss of expression may occur without significant repercussions upon cancer cell survival. Therefore, these antigens could be particularly sensitive to immune selection during disease progression, under the effects of antigen specific immunization, and, of course, in vitro culturing. The exact incidence of this occurrence is unknown. 13. It is possible that a selection bias occurs whenever a population of tumor cells is placed in vitro for further expansion and characterization. It is unknown which cellular dynamics are actually occurring in vitro, but it may be that the most robust subpopulation of cells become the dominant cell line, overgrowing the smaller cell populations. It is not known whether such long-term cultures continue to converge in a clonal nature, or develop intracultural differences detectable only at the level of the genome. Regardless, there will always be some bias built into any such tumor model, and the overall level of tumor heterogeneity within the established cell culture does not seem to be any higher than that seen in vivo. 14. In conclusion, the isolation and culture of melanoma cells utilizing FNAB is a fast, efficient and highly reproducible method of obtaining human melanoma samples for subsequent in vitro expansion and characterization. Upon successful expansion, the cells provide the foundation for all subsequent functional analysis and tumor/T-cell interac-

Melanoma Cell Lines

99

tions. For the most part, the results obtained can be translated to the in vivo tumor microenvironment, providing a powerful method for the prospective analysis and immunosurveillance of the response to vaccination trials in patients with advanced disease. From a single FNAB of a melanoma lesion, “contaminating” cells such as CD4 (+), CD8 (+) T cells, dendritic cells, and NK cells provide a further level of complexity of what is thought to be necessary for a successful immune response to occur.

References 1. Smith, R. A., Cokkinides, V., von Eschenbach, A. C. (2002) Cancer Statistics, 2002: Progress or cause for concern? CA Cancer J. Clin. 52, 6–8. 2. Cormier, J. N., Hijazi, Y. M., Abati, A., et al. (1998) Heterogeneous expression of melanoma-associated antigens (MAA) and HLA-A2 in metastatic melanoma in vivo. Int. J. Cancer 75, 517–524. 3. Riker, A. I., Panelli, M. C., Kammula, U. S., et al. (1999) Development and characterization of melanoma cell lines established by fine-needle aspiration biopsy: Advances in the monitoring of patients with metastatic melanoma. Cancer Det. and Prev. 23, 387–396. 4. Luyten, G. P., Naus, N. C., Mooy, C. M., et al. (1996) Establishment and characterization of primary and metastatic uveal melanoma cell lines. Int. J. Cancer 66, 380–387. 5. McNamara, M., Kennedy S. M. (1997) Successful establishment of uveal and conjunctival melanoma in vitro.In vitro Cell Dev. Biol. Anim. 33, 236–239. 6. Behm, F. G., O’Dowd, G. J., Frable, W. J. (1984) Fine-needle aspiration effects on benign lymph node histology. Am. J. Clin. Pathol. 82, 195–198. 7. Ljung, B. M., Chew, K., Deng, G., Matsumura, K., Waldman, F. M., and Smith, H. (1994) Fine needle aspiration techniques for the characterization of breast cancers. Cancer 74, 1000–1005. 8. Cormier, J. N., Panelli, M. C., Hackett, J. A., et al. (1999) Natural variation of the expression of HLA and endogenous antigen modulates CTL recognition in an in vitro melanoma model. Int. J. Cancer 80, 781–790. 9. Marincola, F. M., Hijazi, Y. M., Fetsch, P., et al. (1996) Analysis of expression of the melanoma-associated MART-1 and gp100 in metastatic melanoma cell lines and in in-situ lesions. J. Immunother. 19, 192–205. 10. Scheibenbogen, C., Weyers, I., Ruiter, D. J., Willhauck, M., Bittinger, A., Keilholz, U. (1996) Expression of gp100 in melanoma metastases resected before and after treatment with IFN-α and IL-2. J. Immunother. 19, 375–380. 11. de Vries, T. J., Fourkour, A., Wobbes, T., Verkroost, G., Ruiter, D. J., and van Muijen, G. N. Heterogeneous expression of immunotherapy candidate proteins gp100, MART-1, and tyrosinase in human melanoma cell lines and in human melanocytic lesions. Cancer Res. 57, 3223–3229. 12. Lehmann, F., Marchand, M., Hainaut, P., et al. (1995) Differences in the antigens recognized by cytolytic T cells on two successive metastases of a melanoma patient are consistent with immune selection. Eur. J. Immunol. 25, 340–347.

100

Riker

Brain Tumor Cell Culture

101

8 Isolation and Culture of Human Brain Tumor Cells German G. Gomez and Carol A. Kruse 1. Introduction Sixty percent of all intracranial neoplasms are of glial origin. As a result of their infiltrative growth and heterogeneity, standard treatment (surgery, chemotherapy, and radiotherapy) is noncurative (1,2). Patient survival is poor and has not significantly improved over the past 20 years. It is a common belief in the neuro-oncology field that development of combination therapies for malignant brain tumors will be essential if improvement in survival is to occur (3,4). To test experimental single and multimodal therapies, animal and in vitro models of brain tumors are necessary. Successful isolation and culture of primary human malignant glioma cell lines gives researchers in vitro models for studying brain tumor progression and genetics, mechanisms of resistance to chemo-, radio-, and immunotherapies, tumor invasion, and new therapeutic agents (5-12). We describe the materials needed and procedures used to isolate human brain tumor cells from surgical tissue specimens and from cavitational ultrasonic surgical aspirates (CUSA; Fig. 1) (13). We also specify the media and conditions required to establish and maintain human brain tumor cells in culture. Finally, we detail ways to characterize the cells. 2. Materials

2.1. Transport Vessels and Fluids 1. Sterile 80 mL specimen collection containers (Starplex Scientific, Etobicoke, Ontario, CA) containing 10 mL of RPMI 1640 medium. To avoid loss of small biopsy specimens, they can be placed between Telfa dressing (Kendall Company Ltd, UK) moistened with sterile saline. 2. The tissue collection filter from the specimen trap contains tissue fragments in sterile saline irrigation fluid from the CUSA. 3. Erythrocyte lysis buffer components: 8.3 g/L ammonium chloride, 0.02 g/L disodium ethylenediaminetetraacetic acid (EDTA) and 1.0 g/L sodium bicarbonate. From: Methods in Molecular Medicine, vol. 88: Cancer Cell Culture: Methods and Protocols Edited by: S. P. Langdon © Humana Press Inc., Totowa, NJ

101

102

Gomez and Kruse

Fig. 1. Methods used to isolate brain tumor cells for culture from primary surgical or CUSA specimens.

2.2. Cell Digestion 1. 2. 3. 4. 5.

DNase type I (Sigma). Hyaluronidase type V (Sigma). Collagenase type IV (Sigma). Cellector tissue sieves with 100 mesh screens (VWR Scientific Products, www.vwrsp.com). Ficoll-Paque density 1.083 g/mL gradient medium (Pharmacia, Piscataway, NJ).

2.3. Cell Growth Media, Supplements, Buffers, and Reagents 1. Culture medium: Dulbecco’s modified Eagle’s medium (DMEM; Life Technologies, Grand Island, NY) + 10% fetal bovine serum (FBS; Gemini Bio-Products Woodland, CA), 100 U/mL penicillin/100 µg/mL streptomycin (Fisher Scientific, Pittsburgh, PA), 40 mg/mL gentamicin (Elkins-Sinn, Inc., NJ), and 200 mM L-glutamine (Life Technologies). 2. Roswell Park Memorial Institute (RPMI) 1640, Ham’s F10 (F10), or F12 (F12) media. 3. Hank’s balanced salt solution without calcium and magnesium (HBSS; Life Technologies). 4. Phosphate buffered saline (PBS; Life Technologies) with Versene (1 mM EDTA). 5. 0.025% Trypsin in PBS.

3. Methods 3.1. Acquisition of Tissue With compliance issues at today’s forefront, it is generally accepted that Institutional Review Boards (IRB) have knowledge of tissue being banked and/or cultured and that human consent is required. Hospitals and associated academic institutions


103

generally find it less cumbersome to ask for consent on the hospital’s surgical consent form. To obtain tissue, RPMI 1640 medium is placed in sterile specimen collection containers at 4C until needed. In the operating room, and after the surgical pathologist deems that adequate material is available for diagnosis, resected remnant tissue is placed directly into the RPMI 1640 medium and transported immediately to the research laboratory for further manipulation. In some instances, tissue fragments are also obtained from the specimen trap attached to the CUSA. The specimen trap containing the specimen filter is a suitable container for transport to the laboratory, where further manipulations ensue in the biosafety hood and adequate protective labwear and practices are used (see Note 1).

3.2. Tissue Manipulations 3.2.1. Mechanical Dispersion of Tissue 1. If the tissue is bloody, 1–2 rinses of the tissue with 5–10 mL of HBSS should follow with aspiration of the fluid into a trap with hypochlorite (bleach) or other disinfectant. 2. If enzymatic digestion is planned, leave the tissue within the specimen container for further manipulation. Alternatively, with sterile forceps transfer brain tumor tissue to a glass Petri dish. Add 5–10 mL RPMI 1640 medium and finely mince the tissue (1–2 mm) with sterile scissors. At this point you may proceed with purely mechanical dispersion of the minced tissue fragments, or proceed with enzymatic digestion (see Subheading 3.2.2.). 3. Mincing is followed by repeated tituration with a tissue culture pipet. At this point transfer the cell suspension into a 15-mL conical centrifuge tube and allow several minutes for the large fragments to settle to the bottom of the tube. Place the supernate containing single cells and cell fragments directly into culture (see Subheading 3.4.). Transfer the larger fragments that settle to a tissue sieve with a stainless steel mesh. Using a blunt ended glass rod, force the tissue through the screen, rinse the screen with RPMI 1640, and then place the cell suspension into culture (see Subheading 3.4.)

3.2.2. Enzymatic Digestion of Minced Tissue 1. Common practice is to enzymatically digest the minced tissue into a single cell suspension. Add concentrated enzymes to the specimen container at final concentrations of 0.002% DNase type I, 0.01% hyaluronidase type V, and 0.1% collagenase type IV. 2. Add a magnetic flea to the suspension and then place the container at a low setting providing gentle agitation on a magnetic stirrer. Place the tissue at 37C for 1–3 h (see Note 2). It can be determined visually when the clumps disintegrate into a single cell suspension. 3. To remove enzymes, transfer the resulting the cell suspension to a centrifuge tube, maximize the volume in the tube with HBSS, and centrifuge at 200g for 10 min. Aspirate the supernatant and process the cell pellet for density gradient centrifugation (see Subheading 3.3.).

3.2.3. Fragmented Tissue Isolated from CUSA Specimen Traps 1. The specimen trap and tissue collection filter (Fig. 2) from the CUSA (Valley Labs, Model 200, Boulder, CO) is nonsterile when shipped. It must be sterilized before use. It withstands STERRAD gas sterilization (Advanced Sterilization Products, Irvine, CA; www.sterrad.com) involving heat exposure up to 70C. After tissue collection, seal the specimen trap in the operating room for transport to the research laboratory.

104

Gomez and Kruse

Fig. 2. Specimen collection filter from CUSA specimen trap.

2. To gain access to the filter for removal of tissue, set the filter on a sterile flat metal tray and use scissors to slit the bag open at the top end. Recover the fluid inside the bag and place in 50-mL centrifuge tubes. Then lay the bag flat on the tray and slit it down the middle. Scrape any tissue adherent to the walls of the trap with a flat spatula and transfer into the same centrifuge tubes. Pipet HBSS sparingly to the inside of the trap, then recover, and add this cell suspension to the scraped cells. Add HBSS to the maximum volume of the tubes and obtain cell pellets by centrifuging at 200g for 10 min at room temperature. The supernatant is then aspirated and discarded. 3. Next, remove red blood cell contamination present in the pellet. Resuspend the pellet in approx 2–5 mL of HBSS. Then add erythrocyte lysing buffer to the resuspended cell pellet at the maximum tube volume. Perform this procedure at room temperature, or warm the contents of the tube slightly by agitating it in a 37C water bath. Generally, 5–10 min is sufficient. When hemolysis is noted (see Note 3), centrifuge the tubes once again at 200g for 15 min. The supernatant is aspirated and the cell pellet washed by centrifugation several more times with HBSS. After the final wash, the cell pellet is resuspended in HBSS and prepared for density gradient centrifugation (see Subheading 3.3.).

3.3. Density Gradient Centrifugation of Single Cell Suspensions 1. Resuspend the cell pellet in two vol of HBSS and carefully layer over one vol of FicollPaque density gradient medium (see Note 4). Centrifuge the tubes at 400g for 20 min. 2. Collect the viable cells at the buffer/Ficoll-Paque interface (see Note 5). Wash the cells isolated at the interface twice with HBSS by centrifugation.

3.4. Culture and Maintenance 3.4.1. Culture Initiation 1. With minced tissue, place aliquots of the cell aggregates into multiple tissue culture flasks. Add a maximum of 3–4 mL of tissue culture medium to 25 cm2 vented flasks (or loosely capped nonvented flasks) so the tissue fragments can settle and adhere to the flask surface. Place the cultures in the incubator and leave undisturbed for 2–3 days (d) so that outgrowth from the attached tissue occurs. After this does occur, increase the volume to 5 mL. 2. With cells isolated from the Ficoll-Paque gradients, resuspend the cell pellets in 1–2 mL of DMEM growth medium with supplements for aliquoting into a variety of growth media.


105

To maximize the chances of recovering all cell types within the heterogeneous cell populations, a variety of growth media is used if sufficient numbers are available for culture (see Note 6). All growth media is supplemented with 10% FBS (v/v), 2 mM L-glutamine, 100 U/mL penicillin, 100 µg/mL streptomycin, and 50 µg/mL gentamicin, pH 7.2. 3. Dispense 9 mL of growth medium and 1 mL of tumor cell suspension into a 75 cm2 culture flask (or 4.5 mL of medium to 0.5 mL of tumor cell suspension in a 25 cm2 culture flask). The number of flasks initiated depends upon the volume of tumor tissue available. Place the flasks in an incubator with a humidified chamber at 37C in 5% CO2. 4. Viable tumor cells attach within the first several days of culture, whereas the majority of glia do not. Other normal brain cells, such as microglia/macrophage, fibroblasts, endothelial, or trapped glia may initially attach; however, their numbers will decline rapidly and eventually they will be eliminated from culture because of their slow growth (9). Initially, every 4–5 d about 50% of the growth medium along with cells in suspension culture are removed and replaced with fresh growth medium until the predominant cell type is the attached cell. The cultures are monitored and fed with fresh growth medium at least once a week.

3.4.2. Passaging and Cryopreservation 1. When cells become confluent (1–4 wk), save the conditioned cell culture medium and transfer to a centrifuge tube. Gently rinse the attached cells with Versene in PBS and aspirate. Then add 2–4 mL of 0.025% trypsin in PBS and return the flask to the incubator and monitor every 5 min. 2. When the cells detach from the culture flask (see Note 7), quench trypsin activity by adding cell culture medium with supplements. Pellet the cells by centrifugation, remove the supernatant, and replace with several milliters of fresh culture medium and resuspend for cell counting. 3. Using a hemocytometer, determine cell counts and viability by trypan blue dye exclusion. 4. At this point, transfer the cell suspension to a larger culture flask, or divide the cells equally among multiple culture flasks. Generally, cells from a confluent monolayer in one flask are split among four or five equally-sized flasks. Culture cells in fresh culture medium containing 20% of the conditioned medium from which the cells were grown prior to passage. 5. Additionally, cryopreserve a percentage of the low-passage cells to avoid potential loss resulting from microbial contamination or unforeseen incidents, such as incubator failure. Cells resuspended in growth medium are mixed with an equal volume of ice-cold, heatinactivated fetal calf serum (FCS) containing 15% dimethlysulfoxide (DMSO). Freeze in cryogenic vials using a Cryomatic Cellevator (L.A.O. Enterprises, Gaithersburg, MD) suspended above the liquid nitrogen in a tank to lower the temperature at 1C/min. Long-term storage of vials is accomplished by transferring the vials into liquid nitrogen or into a –80C freezer (see Note 8).

3.4.3. Recovery and Expansion of Cryopreserved Cells 1. Quick-thaw cells by placing the freezing vial(s) in a 37C water bath. Once thawed, immediately dilute the cells into 10 mL HBSS and wash twice by centrifugation (see Note 9). 2. Once the cells are washed, resuspend them in the appropriate growth medium. After a cell count and viability determination, plate the cells at 0.5–1.5 million viable cells per 75 cm2 flask. Dependent on cell viability, density at which cells are plated, and length of time the cells are cryopreserved, it may take up to 2 wk for cells to recover and begin expansion.

106

Gomez and Kruse

Fig. 3. Morphologic shapes of cultured glioma cells displaying (A) a fibroblastic morphology: slender, elongated, spindle-shaped cells with oval nuclei, or (B) an epithelioid morphology: large, vesiculated, flat polygonal cells with abundant cytoplasm and interconnecting processes.

3.5. Characterization of Brain Tumor Cells 1. Brain tumor cells acquire multiple morphologies when in confluent monolayer (5). Phenotypically, four growth patterns are described as fibroblastic, fasicular, epithelioid, and glial. Two morphologic types that we and others report as common (Fig. 3) appear as either long, slender spindle-shapes or as larger cells with flat, vesiculated epithelioid shapes (6,10,11,14; see Note 10). We have success in getting 40–50% of cell specimens to plate in culture; however, those that make it to a cell line designation (≥passage 20) may only amount to 10–15% of those that initially plate. Others stop growing, or grow so slowly that they are less useful as a cell culture model. If cells are planned for use in vitro models, verify mycoplasma negativity of the cultured cells and monitor for it routinely (see Note 11). 2. Demonstrate the glial origin of the brain tumor cells at early passage. This is commonly done by immunohistochemical staining of the cells for markers (11). Cells of astrocytic lineage generally are glial fibrillary acidic protein (GFAP) positive. This particular marker may be lost upon repeated passage. Many astrocytic tumors also express vimentin, platelet derived growth factor (PDGF), neuron specific enolase (NSE), and S100 protein. Oligodendrocytic cells generally express galactocerebroside C. Neurofilament is used as a neuronal marker. If contaminating fibroblasts are present, fibronectin and vimentin will be expressed on them. 3. Once lineage is confirmed, then perform characterization of the cells for karyotype, tumorigenicity, genetic, and molecular characteristics. Other sections of this volume will address the methods for these assays, which include among others, proliferation assays, plating efficiency, tumorigenicity assays, mobility, and invasion assays. Neuropathologists are finding that genetic and molecular techniques may play a role in distinguishing astrocytomas from oligodendrogliomas, or mixed oligoastrocytomas. Diagnostically, this carries great significance, as the latter two types may respond to chemotherapeutics, whereas astrocytomas and glioblastomas do not (15). As such, fluorescence in situ hybridization for chromosomes 1p and 19q deletions, or assays for loss of heterozygosity at chromosome 10 may eventually be routinely used to help confirm diagnoses made by histologic criteria (16,17). Furthermore, the degree of malignancy of astrocytomas may also be defined by molecular


107

criteria (18,19). High-grade astrocytomas also frequently display chromosome 7 amplification, resulting in epidermal growth factor receptor (EGFR) overexpression (20,21). The loss of the chromosome 17 p53 tumor suppressor gene, or mutations of it are also noted in high frequency in astrocytic tumors (14,17,22).

4. Notes 1. If sufficient sample is available (≥1 mL) for further characterization, it is good practice to obtain small pieces of tissue that are snap frozen with liquid nitrogen after wrapping in foil or placing in Tissue Tek OCT embedding compound (Catalog #2583, Sakura Finetek, Torrance, CA); these can be stored at –80C. This complements the tissue taken by the surgical pathologist, the bulk of which is generally formalin-fixed and available in paraffin blocks. When only very small biopsy specimens are available this cannot be done, and generally the mechanical dispersion method is chosen to minimize loss of cells that occur by other more extended processing methods involving more manipulation. 2. At times it is convenient to enzymatically digest the minced tissue overnight. If so, the digestion occurs at room temperature. 3. Hemolysis is observed by noting the change from a turbid suspension to a red transparent (hemolytic) color at the interface of the fluid and tube. Although it is important to minimize cell exposure to ammonium chloride, if hemolysis is incomplete, this step may be repeated. 4. In 15-mL conical tubes, generally overlay 4 mL of Ficoll-Paque with 8–10 mL of resuspended cell pellet volume. In 50-mL tubes place 12 mL of Ficoll-Paque with 24–36 mL of resuspended cell pellet. Sharper, more easily visible bands are generally obtained with gradients in the 15-mL tubes. 5. Aspirate fluid from the top to within several milliliters of the band visible at the interface. Cells are collected at the interface. Red blood cells and necrotic cells are at the bottom of the gradient. 6. Brain tumor cells typically grow well in either F10 or F12 media mixed with DMEM at 1/1 (v/v). If cells are not available in the amounts needed for multiple flasks, F12/DMEM is the medium of preference. DMEM, RPMI 1640 media, and a mixture of RPMI and DMEM at a 2/1 (v/v) are also used. 7. Some cells may not detach easily with trypsin. Physical collision of the flask against a gloved hand may help to dislodge the cells from the surface. Only minimal use of cell scrapers (Fisher Scientific, Pittsburgh, PA) is recommended, as continued use of scrapers promotes cell aggregation on subsequent passaging. 8. A cryogenic controlled rate freezing container (Fisher Scientific) with an isopropyl alcohol bath also may be used. These containers generally handle larger numbers of vials. Maintenance of cell viabilities is better when storage is in liquid nitrogen, rather than at –80C. 9. Cells need to be quickly thawed and the DMSO diluted, as the latter is toxic to cells and can affect cell viability in culture. 10. Our experience is that the latter larger, vesiculated cells do not grow as rapidly and are often lost over time in a heterogeneous culture. The vesiculated cells initially may grow well (10–15 passages), but do not continue to do so after repeated passage. Therefore, establishment of this type of morphologic cell as a cell line is rare. 11. Hoechst dye can be used for mycoplasma detection. Many companies offer detection kits (MTC/NI Rapid Detection System, Gen-Probe Inc., San Diego, CA). If positive, the cells can be treated with a course of antibiotics, such as BM-cyclin (Roche Pharmaceuticals, Mannheim, Germany).

108

Gomez and Kruse

References 1. Cavanee, W. K., Bigner, D. D., Newcomb, E. W., Paulus, W., and Kleihues, P. (1997) Diffuse astrocytomas. In: Kleihues, P. and Cavenee, W. K. (eds.) Pathology and Genetics of Tumours of the Nervous System, International Agency for Research on Cancer, Lyon, France, pp. 2–9. 2. Laws, E. R., Jr. (1998) Central nervous system tumors: what have we learned and where are we heading? Ca Cancer J. Clin. 48, 327–329. 3. Paul, D. B. and Kruse, C. A. (2001) Immunologic approaches to therapy for brain tumors. Curr. Neurol. Neurosci. Rep. 1, 238–244. 4. Virasch, N. and Kruse, C. A. (2001) Strategies using the immune system for therapy of brain tumors. In: Liang, B. C. (ed. ) Hematology/Oncology Clinics of North America, Vol. 15, Saunders, Philadelphia, PA, pp. 1053–1071,. 5. Bigner, D. D., Bigner, S. H., Ponten, J., et al. (1981) Heterogeneity of genotypic and phenotypic characteristics of fifteen permanent cell lines derived from human gliomas. J. Neuropathol. Exp. Neurol. 40, 201–229. 6. Bakir, A., Gezen, F., Yildiz, O., et al. (1998) Establishment and characterization of a human glioblastoma multiforme cell line. Cancer Genet. Cytogenet 103, 46–51. 7. Helseth, E., Dalen, A., Unsgaard, G., Vik, R., and Helseth, A. (1989) Overexpression of the epidermal growth factor receptor gene in a human carcinoma cell line derived from a brain metastasis. J. Neuro-oncol. 7, 81–88. 8. Joy, A., Panicker, S., and Shapiro J. R. (2000) Altered nuclear localization of bax protein in BCNU-resistant glioma cells. J. Neuro-oncol. 49, 117–129. 9. Silbergeld, D. L., and Chicoine, M. R. (1997) Isolation and characterization of human malignant glioma cells from histologically normal brain. J. Neurosurg. 86, 525–531. 10. Kruse, C. A., Mitchell, D. H., Kleinschmidt-DeMasters, B. K., et al. (1992) Characterization of a continuous human glioma cell line DBTRG-05MG: growth kinetics, karyotype, receptor expression and tumor suppressor gene analysis. In Vitro Cell. Dev. Biol. 28A, 609–614. 11. Kruse, C. A., Varella-Garcia, M., Kleinschmidt-DeMasters, B. K., et al. (1998) Receptor expression, cytogenetic, and molecular analysis of six continuous human glioma cell lines. In Vitro Cell. Dev. Biol. 34, 455–462. 12. Westphal, M. and Meissner, H. (1998) Establishing human glioma-derived cell lines. Methods in Cell Biol. 57, 147–165. 13. Oakes, W., Friedman, H. S., Bigner, S. H., Bullock, N. H., and Bigner, D. D. (1990) Successful laboratory growth and analysis of CUSA-obtained medulloblastoma samples, J. Neurosurg. 72, 821–823. 14. Gjerset, R. A., Fakhrai, H., Shawler, D. L., et al. (1995) Characterization of a new human glioblastoma cell line that expresses mutant p53 and lacks activation of the PDGF pathway. In Vitro Cell. Dev. Biol. Animal 31, 207–214. 15. Dropcho, E. J. (2001) Novel chemotherapeutic approaches to brain tumors. In: Liang, B. C. (ed ), Hematology/Oncology Clinics of North America, Vol. 15, Saunders, Philadelphia, PA, pp. 1027–1052. 16. Fuller, C. and Perry, A. (2002) Fluorescence in situ hybridization (FISH) in diagnostic and investigative neuropathology. Brain Pathol. 12, 67–86. 17. Meyer-Puttlitz, B., Hayashi, Y., Waha, A., et al. (1997) Molecular genetic analysis of giant cell glioblastomas. Am. J. Pathol. 151, 853–857. 18. Shapiro, J. R. (2001) Genetics of nervous system tumors. In: Liang, B. C. (ed.) Hematology/ Oncology Clinics of North America, Vol. 16, Saunders, Philadelphia, PA, pp. 961–977.


109

19. Rempel, S. A. (2001) Molecular biology of nervous system tumors. In: Liang, B. C. (ed.) Hematology/Oncology Clinics of North America, Vol. 15, Saunders, Philadelphia, PA, pp. 979–1006. 20. Malden, L. T., Novak, U., Kaye, A. H., and Burgess, A. W. (1988) Selective amplification of the cytoplasmic domain of the epidermal growth factor receptor gene in glioblastoma multiforme. Cancer Res. 48, 2711–2714. 21. von Deimling, A., Louis, D. N., von Ammon, K., et al. (1992) Association of epidermal growth factor receptor gene amplification with loss of chromosome 10 in human glioblastoma multiforme, J. Neurosurg. 77, 295–301. 22. Fults, D., Brockmeyer, D., Tullous, M. W., Pedone, C. A., and Cathon, R. M. (1992) p53 mutation and loss of heterozygosity on chromosome 17 and 10 during human astrocytoma progression. Cancer Res. 52, 674–679.

110

Gomez and Kruse

Renal Cancer Cell Lines

111

9 Isolation and Culture of Renal Cancer Cell Lines Jae-Gahb Park, Ja-Lok Ku, and So-Yeon Park 1. Introduction Renal cell carcinoma (RCC) represents approximately 2% of all cancers and accounts for 85% of renal cancers in adults. There are more than 30,000 new cases per year and in excess of 12,000 deaths in the United States (1). RCC is rare in the first two decades of life, comprising only 2% of pediatric tumors. The incidence increases with advancing age, peaking in the sixth decade of life. Until recently, RCC was regarded as a single entity with a wide variety of gross and histologic appearances and variable clinical course. However, new studies have indicated that RCC is not a single tumor, but rather a group of tumors with distinct histologic features, cytogenetic abnormalities, and genetic alterations. Accordingly, a new classification of RCC has recently been introduced and the major types of RCC are as follows: conventional (clear cell) renal carcinoma, papillary renal carcinoma, chromophobe renal carcinoma, and renal cell carcinoma, unclassifiable (2). Cytogenetic studies of clear cell RCC have shown that most tumors exhibit a deletion or unbalanced translocation resulting in loss of genetic material in chromosome 3p harboring VHL gene (3p25.3) (3). A second nondeleted allele of the VHL gene shows somatic mutation in 50% and hypermethylation-induced inactivation in an additional 10–20% of these tumors. Papillary RCC is characterized by trisomies (chromosome 7, 16, and 17) and loss of the Y chromosome (4). In addition, a translocation between chromosome X and 1 has been reported (5). Recently, germline mutations of c-met oncogene at 7q31 have been detected in families with hereditary papillary renal cell carcinoma (6). Tumors grown in cell culture or in athymic nude mice provide more homogenous tumor materials for study of morphological, biochemical, and molecular changes associated with initiation or progression and for use in identification of renal cancer genes. (7). RCC cell lines have been cultured in vitro by many laboratories during the past three decades, and many human RCC cell lines have been reported recently (7–11). A large bank of well-characterized, human RCC cell lines should reflect the diversity of tumor phenotypes and provide adequate models for tumor heterogeneity. From: Methods in Molecular Medicine, vol. 88: Cancer Cell Culture: Methods and Protocols Edited by: S. P. Langdon © Humana Press Inc., Totowa, NJ

111

112

Park, Ku, and Park

In general, RCC cell lines are relatively easy to develop and can be established from metastatic tissues and primary tumors (success rate, 9.5–49%). Solid renal cancers are composed of a mixture of tumor cells of various histological types as well as normal cells such as lymphocytes and connective tissue cells, which complicates their molecular analysis (12). Lymphocytes can inhibit the growth of cancer cells. Enzymatic digestion of solid primary tumor tissues may result in poor recovery of viable cells and overgrowth of cancer cells with contaminating stromal cells. The faster growing stromal fibroblast-like cells easily outgrow and overgrow the cancer cells. The mechanical spillout method provides a simpler, faster, and less traumatic method of obtaining cells for culture (13). This method allows the minimization of stromal cell contamination because stromal cells are not easily detached from the tissue matrix by mechanical means. Rutzky and Moyer (14) summarized the features of key relevance for successful culture: nonenzymatic or minimal dissociation of tumor tissue, seeding cultures as explant and at high cell densities, removal of contaminating fibroblasts usually after they have aided culture initiation, and delaying passage until high cell densities have been achieved and plating cells at high density. In this chapter, we describe the culture of primary renal cell carcinoma cell lines, and include the detailed protocols relating to the establishment from metastatic and primary tumor tissues using mechanical spillout, the isolation of pure cancer cells, and the maintenance, propagation and preservation of cancer cells. In primary cell culture, dispersed tumor cells can be plated in plastic culture flasks with a basal medium such as RPMI 1640, or Dulbecco’s minimum essential medium (DMEM) supplemented with 10–20% heat-inactivated fetal bovine serum (FBS) (7,8,10). Our laboratory has extensive experience with serum-containing and fully defined media for the establishment of continuous cell lines derived from human cancers. Our RCC cell lines (11) were initially cultured in ACL-4 medium supplemented with 5% heat-inactivated FBS (AR5) (15,16). ACL-4 is a fully defined medium formulated for the selective growth of human lung adenocarcinoma cells (15,16) and has proved useful in the establishment of hepatocellular, laryngeal, and colorectal cancer cell lines (17-19). ACL-4 is a complex medium, consisting of 12 additives to basal medium (13,15,16).

2. Materials 2.1. Initiation Media for Primary Cell Culture 1. RPMI 1640 medium: RPMI 1640 powder, 25 mM HEPES buffer, 20 mM sodium bicarbonate, antibiotics (streptomycin-penicillin, usually 100 U/mL); filter through 0.22 µm bottle top filter. 2. ACL-4 medium: RPMI 1640 as basal medium, 20 µg/mL insulin, 10 µg/mL transferrin, 25 nM sodium selenite, 50 nM hydrocortisone, 1 ng/mL epidermal growth factor, 10 µM ethanolamine, 10 µM phosphorylethanolamine, 100 pM triiodothyronine, 2 mg/mL bovine serum albumin (BSA), 2 mM glutamine, 0.5 mM sodium pyruvate. 3. Initiation and growth medium (AR-5 medium): ACL-4 medium supplemented with 5% heat-inactivated FBS.

2.2. Reagents and Apparatus 1. Sterile PBS, pH 7.0.

Renal Cancer Cell Lines 2. 3. 4. 5. 6. 7.

113

Sterile 100-mm Petri dishes. Sterile scissors. Sterile forceps. 5- and 10-mL pipets. Ficoll gradient. Culture flasks (25 cm2) coated with attachment factors such as collagen and laminin.

3. Methods 3.1. Procurement of Tumor Specimens Solid tumors (metastatic and primary tumors) must be carefully and aseptically excised from pathologically proven renal cancer samples and transferred to a cell culture laboratory in RPMI 1640 medium (see Note 1). The transporting RPMI 1640 medium should contain antibiotics, such as penicillin-streptomycin, to prevent bacterial contamination.

3.2. Primary Cell Culture 3.2.1. Procedure for Solid Tumors 1. Transfer tumor tissues to fresh sterile PBS in a dish and rinse. 2. Transfer tumor tissues to a new dish and dissect off necrotic areas, fatty tissues, blood clots, and connective tissues with forceps and scissors. 3. Finely mince the tumor tissues into very small pieces with sterile scissors. 4. Disassociate tissue pieces into small aggregates by vigorous pipeting with 10 mL of PBS. 5. Allow heavier pieces to sediment by gravity. 6. Carefully harvest the tumor cell aggregates containing washes by pipet and transfer to a 15 mL sterile centrifuge tube. 7. Centrifuge and remove the supernatant. 8. Wash by resuspending in PBS, centrifuge, and again remove the supernatant. 9. Resuspend the pieces in 5 mL of AR-5 initiation medium. 10. Transfer the pieces to a 25-cm2 flasks. 11. Harvest the remaining large pieces, place in a 15-mL sterile centrifuge tube,centrifuge, remove the supernatant, and culture immediately. 12. Cap the flask and maintain in a humidified incubator at 37°C in an atmosphere of 5% CO2 and 95% air.

3.3. Isolation of Cancer Cells Most renal cancer cells can grow as either firmly or loosely adherent colonies. If the cancer cells are adherent, the medium is changed weekly until a substantial outgrowth of cells is observed. Isolation of the cancer cells is performed when heavy tumor-cell growth is observed. Several methods can be employed to isolate pure cancer cells.

3.3.1. Rapping Method This method is used when cancer cells are loosely attached to the surface of the culture flask and grow as adherent colonies among the stromal fibroblast cells. Of these cancer cells, some cancer cells or whole colonies are detached from the colonies and grow in suspension.

114

Park, Ku, and Park

1. 2. 3. 4.

Gently tap the flasks. Harvest the individual cancer cell and colonies. Transfer the floating aggregates to a sterile centrifuge tube. Spin the cells at 400g for 5 min, decant two-thirds volumes of supernatant from the pellets and add 5 mL of ACL-4 medium supplemented with 5% FBS. 5. Seed the cell pellet into 25-cm2 flasks. 6. Cap the flask and maintain the culture in a humidified incubator at 37°C in an atmosphere of 5% CO2 and 95% air.

3.3.2. Scraping Method Usually, firmly adherent colonies surrounded by stromal fibroblasts form large densely packed colonies that continue to grow laterally, slowly infiltrating, and displacing the adjacent fibroblasts or mesothelial cells. Eventually, the entire flask may be taken over by these tumor cells. In this case, cancer cells can be isolated by scraping and differential trypsinization (13). In our experience, when large adherent cancer cell colonies are less impeded by surrounding fibroblasts, scraping is the best way of isolating the cancer cells; the cells are less damaged and stromal contamination is minimized (11,17–19). 1. Maintain the culture until the adherent colonies form well-isolated large colonies (5–10 mm in diameter). This may take several months. 2. Select colonies and mark with marker pen on the flask base. 3. Decant the medium and add 1 mL of growth medium. 4. Detach the adherent colonies by scraping with a policeman or cell scraper, to allow them to float freely in the medium. 5. Add 4 mL of growth medium and harvest the detached colonies with a pipet. 6. Transfer the cancer cells into 25-cm2 flasks. 7. Maintain cultures in humidified incubators at 37°C in an atmosphere of 5% CO2 and 95% air.

3.3.3. Differential Trypsinization Method Some cancer cells grow among stromal fibroblasts and produce small colonies. Usually these cancer cells do not overgrow the fibroblasts. In these cases, the differential trypsinization method is preferred. The method depends on differences in cell susceptibility to trypsinization (13). Some cancer cells are more susceptible to trypsinization than the fibroblasts and vice versa. 1. 2. 3. 4.

Decant the medium, rinse with PBS, and remove the PBS by aspirating. Add 1.5 mL of diluted trypsin (0.025% or 0.05% or 0.1% trypsin). Place into incubator at 37°C for approx 3 min. Observe the flasks under the inverted microscope through incubating, and determine whether cancer cells or fibroblasts are detached. If both cancer cells and stromal fibroblasts remain attached, incubate the culture flasks until either the cancer cells or fibroblasts detach. 5. If cancer cells have detached and fibroblasts remain attached, add 5 mL of growth medium containing serum and harvest the detached cancer cells. If, on the other hand cancer cells remain attached and the fibroblasts have detached, remove the medium, rinse with the growth medium, and then add 5mL of growth medium.


115

Fig. 1. Phase contrast microscopy of SNU-1272 renal cell carcinoma cell line.

Fig. 2. Phase contrast microscopy of SNU-328 renal cell carcinoma cell line.

6. Centrifuge the harvested cancer cells, remove the supernatant, and add 5 mL of AR-5 growth medium. 7. Transfer the cancer cells into 25-cm2 flasks. 8. Maintain cultures in a humidified incubator at 37°C in an atmosphere of 5% CO2 and 95% air.

3.4. Propagation and Preservation of Cancer Cells After establishing cancer cell lines (see Figs. 1 and 2), initial passages are performed when heavy tumor-cell growth and large colonies are observed. Subsequent passages are performed every week or two.

116

Park, Ku, and Park

Fig. 3. (A) Primary tumor (clear cell type) of SNU-349 renal cell carcinoma cell line.

The ACL-4 medium supplemented with heat inactivated 5% FBS, which is used in primary cell culture, can be also used for the propagation of renal cancer cell lines (11). This medium must be used until the isolated cancer cells are considered as a cell line. After establishment of cell lines, AR-5 medium can be replaced with RPMI 1640 medium supplemented with 10% heat inactivated FBS (11) (see Note 2). 1. Remove the supernatant and rinse with sterile PBS. 2. Add 2 mL of trypsin-EDTA (usually 0.05%) in PBS and incubate at 37°C for approx 3 min. 3. Add 5 mL of RPMI 1640 medium supplemented with 10% FBS and centrifuge. 4. Decant the supernatant and redisperse the cancer cells by pipeting with the AR-5 growth medium. 5. Seed the cell pellet into new 25-cm2 flasks. 6. Cap the flasks and maintain the cultures in a humidified incubator at 37°C in an atmosphere of 5% CO2 and 95% air.

If the adherent cancer cells are not detached in the flasks, the concentrations of trypsin-EDTA and the incubation times can be increased.

3.5. Representative Characteristics of Cultured Renal Cell Carcinoma Cell Lines The SNU-349 cell line was derived from a renal cell carcinoma, clear cell type. The original tumor of SNU-349 cell line was characterized by optically clear cytoplasm of tumor cells in acinar or alveolar arrangement (Fig. 3A). The nuclei were round and uniform. The nucleoli were absent or small nucleoli were occasionally seen. SNU-349 cancer cells grow as polygonal cells with flattened cytoplasm and a strong adherence


117

Fig. 3. (B) Phase contrast microscopy of SNU-349 renal cell carcinoma cell line. Tumor cells demonstrate the polygonal morphology.

Fig. 4. (A) Primary tumor (granular variant of clear cell type) of SNU-482 renal cell carcinoma cell line. (Continued on next page.)

to the plastic flask containing the culture (Fig. 3B). The SNU-482 cell line was derived from granular variants of clear cell renal cell carcinoma. The original tumor of SNU-482 was aggressive; it invaded into the renal artery and vein, and metastasized to the regional lymph nodes (Fig. 4A). The cytoplasm of tumor cells was variably eosinophilic and granular. The nuclei were large and irregular and had prominent nucleoli.

118

Park, Ku, and Park

Fig. 4. (Continued from previous page.) (B) Phase contrast microscopy of SNU-482 renal cell carcinoma cell line.

The tumor cells were arranged in solid acinar or tubular pattern with multifocal geographic necrosis. The cells of SNU-482 were stellate (Fig. 4B) with the cytoplasmic processes frequently overriding the adjacent cells, resulting in a 3D configuration. Some of the cells were round or oval with minimal adherence to the plastic surface. The nuclei of these round cells appeared smaller than those in the flattened cells, an apparent example of nuclear pleomorphism.

4. Notes 1. Whenever possible, invasive areas from the serosal surface should be selected for primary tumor cultures, to reduce the possibility of microbial contamination. 2. It is recommended that early passages are frozen in cryoprotective medium to prevent loss of the cell lines by contamination or other laboratory accidents.

References 1. Mortzer, R. J., Bander, N. H., and Nanus, D. M. (1996) Renal-cell carcinoma. N. Eng. J. Med. 335, 865–875. 2. Storkel, S., Eble, J. N., Adlakha, K., et al. (1997) Classification of renal cell carcinoma Cancer 80, 987–989. 3. Neumann, H. P. H., and Zbar, B. (1997) Renal cyst, renal cancer and von Hippel Lindau disease. Kidney Int. 51, 164. 4. Kovacs, G. (1989) Papillary renal cell carcinoma: a morphologic and cytogenetic study of 11 cases. Am. J. Pathol. 134, 27–34. 5. Sidhar, S. K., Clark, J., Gill, S., et al. (1996) The t(X;1)(p11.2;q21.2) translocation in papillary renal cell carcinoma fuses a novel gene to the TEF3 transcription factor gene. Hum. Mol. Genet. 5, 1333–1338.


119

6. Schmidt, L., Duh, F. M., Chen, F., et al. (1997) Germline and somatic mutations in the tyrosine kinase domain of the MET proto-oncogene in papillary renal carcinomas. Nat. Genet. 16, 68–73. 7. Anglard, P., Trahan, E., Liu, S., et al. (1992) Molecular and cellular characterization of human renal cell carcinoma cell lines. Cancer Res. 52, 348–356. 8. Grossman, H. B., Wedemeyer, G., and Ren, L. (1985) Human renal carcinoma: characterization of five new cell lines. J. Surg. Oncol. 28, 237–244. 9. Ebert, T., Bander, N. H., Finstad, C. L., Ramsawak, R. D., and Old, L. J. (1990) Establishment and characterization of human renal cancer and normal kidney cell lines. Cancer Res. 50, 5531–5536. 10. Gerharz, C. D., Ramp, D., Olert, J., et al. (1994) Cytomorphological, cytogenetic, and molecular biological characterization of four new human renal carcinoma cell lines of the clear cell type. Virchows Arch. 424, 403–409. 11. Shin, K. H., Ku, J. L., Kim, W. H., et al. (2000) Establishment and characterization of seven human renal cell carcinoma cell lines. BJU Int. 85, 130–137. 12. Linehan, W. M., Miller, E., Anglard, P., Merino, M., and Zbar, B. (1989) Improved detection of allele loss in renal cell carcinomas after removal of leukocytes by immunologic selection. J. Natl. Cancer Inst. 81, 287–290. 13. Oie, H. K, Russell, E. K., Carney, D. N., and Gazdar, A. F. (1996) Cell culture methods for the establishment of the NCI series of lung cancer cell lines. J. Cell. Biochem. 24 (suppl), 24–31. 14. Rutzky, L. P. and Moyer, M. P. (1990) Human cell lines in colon cancer research. In: Moyer, M. P. (ed.) Colon Cancer Cells, Academic Press, London, pp. 155–202,. 15. Gazdar, A. F. and Oie, H. K. (1986) Growth of cell lines and clinical specimens of human non-small cell lung cancer in a serum-free defined medium. Cancer Res. 46, 6011–6012. 16. Gazdar, A. F. and Oie, H. K. (1986) Cell culture methods for human lung cancer. Cancer Genet. Cytogenet. 19, 5–10. 17. Park, J. G., Lee, J. H., Kang, M. S., et al. (1995) Characterization of cell lines established from human hepatocellular carcinoma. Int. J. Cancer 62, 276–282. 18. Ku, J. L., Kim, W. H., Lee, J. H., et al. (1999) Establishment and characterization of human laryngeal squamous cell carcinoma cell lines. Laryngoscope 109, 976–982. 19. Oh, J. W., Ku, J. L., Yoon, K. A., et al. (1999) Establishment and characterization of colorectal-carcinoma cell lines. Int. J. Cancer 81, 902–910.

120

Park, Ku, and Park

Prostate Cancer Cell Lines

121

10 Isolation and Culture of Prostate Cancer Cell Lines Nora M. Navone, Matilde Olive, and Patricia Troncoso 1. Introduction The ability to establish cell cultures from primary tumors and metastases of prostate cancer in a reliable and consistent manner is a valuable tool for studying the biology of these tumors and evaluating the effectiveness of novel therapies. A procedure to propagate human prostatic epithelial cells in vitro for a limited number of cell generations was developed by others (1,2) and was extended to prostate cancer cells from primary tumors (1,3). However, reproducible methods to propagate prostatic cancer cells from more advanced tumors have not been established. This may reflect the fact that prostate cancer cells derived from primary tumors are thought to have nutritional requirements similar to normal prostatic epithelial cells (1,3), whereas more advanced tumors may have different growth requirements, depending on the specific genetic alterations acquired during disease progression. It is therefore understandable why a single protocol may not result in optimal growth of all cancer cells in vitro (which would open up possibilities for long-term culture), that the establishment of human prostate cancer cell lines is very difficult, and that there are few established cell lines (4). During the past five years, we have processed 100 prostate cancer specimens in attempts to determine their optimal growth conditions and to establish long-term cultures, cell lines, and xenografts. We have processed different types of tissue samples (tissue fragments, needle biopsy samples, and fine-needle aspiration biopsy samples) from prostate cancer samples obtained at radical prostatectomy and samples from different metastatic sites (bone, lymph node, liver, skin, adrenal gland, brain, and lung). As a result we have established two human prostate cancer cells lines (5) and several prostate cancer xenografts. In this chapter, we will describe our experience. 1. Materials 1. Culture media: a. RPMI 1640 (6) with 5 µg/mL insulin, 30 nM sodium selenite, 10 nM hydrocortisone. b. BRFF-HPC1 (7), a modification of PFMR-4 (8,9) basal medium (10) without phenol red, with less calcium (0.2 mM), 15 mM HEPES buffer, 5 ng/mL epidermal From: Methods in Molecular Medicine, vol. 88: Cancer Cell Culture: Methods and Protocols Edited by: S. P. Langdon © Humana Press Inc., Totowa, NJ

121

122

Navone, Olive, and Troncoso growth factor (EGF), 100 µg/mL bovine pituitary extract (BPE), 0.28 µM hydrocortisone, 5 µg/mL insulin, 0.1 nM dihydrotestosterone, 250 µg/mL bovine serum albumin, 25 ng/mL cholera toxin, 5 µM phosphoethanolamine, and 10 µg/mL trypsin inhibitors (7). c. F12K (11) with 5 µg/mL insulin, 30 nM sodium selenite, 250 nM hydrocortisone, 25 ng/mL cholera toxin, 5 ng/mL EGF, and 100 µg/mL BPE.

2. Collagen coated dishes: dishes coated with Vitrogen (Cohesion, Palo Alto, CA) in 12 mM HCl (1/4 v/v) or commercially available tissue culture dishes coated with collagen type I. 3. Hank’s balanced salt solution (HBSS) without calcium chloride, magnesium chloride, or magnesium sulfate and with 10 mM HEPES. 4. 10X Red blood cell (RBC) lysis buffer: 1% Potassium bicarbonate, 8.26% ammonium chloride, and 1 mM ethylenediaminetetraacetic acid (EDTA). Sterile filter and store at 4°C for up to 5 d. 5. Collagenase digestion medium: 10 mL growth medium plus 40–100 U/mL collagenase, sterile filtered, and used fresh. 6. Trypsin/EDTA solution: 0.2% trypsin/0.02% EDTA in HBSS. 7. Freezing medium: growth medium plus 10% fetal bovine serum (FBS) and 10% dimethyl sulfoxide. 8. Six- to 8-wk-old male athymic (nude) or mice with immunodeficiency disease (SCID).

3. Methods

3.1. Tissue Collection The selection and sampling of cases is best performed in collaboration with a pathologist, urologist, and/or oncologist (see Note 1). It is essential to minimize the time between sample acquisition and processing. It is also important to incorporate the clinical information (for example, tumor response to therapy) into the protocol for processing and propagation of the tissue specimen. 1. Dissect small sections of prostate cancer tissue from different areas of the tumor. 2. Collect the tissue sample in a sterile vessel containing HBSS with HEPES and store at 4°C for processing within a few hours. 3. To optimize the use of prostate cancer specimens and because prostate cancer xenografts can be expanded in sufficient quantities to allow biochemical and molecular studies, it is also important, whenever possible, to set aside tissue for direct injection into immunosuppressed mice. 4. Subject the mirror-image tissue sample from each sample obtained for tissue culture to routine tissue processing (formalin fixation and paraffin embedding) and histopathologic analysis of H&E-stained sections to assess the tumor cells in the dissected material. Perform the procedures under sterile conditions. Whenever possible, freeze a small amount of blood or normal tissue for comparative purposes (for example, analysis of loss of heterozygosity). These samples can also be used to confirm the origin from a particular patient if necessary.

3.2. Tissue Processing 3.2.1. Tissue Preparation for Tissue Culture The purpose of this step is to obtain clumps of epithelial cells and microexplants of viable neoplastic cells. There is no single recommended procedure for all specimens.


123

The procedure must be adjusted for the source of the material (primary tumor or metastasis) and the findings at macroscopic examination (see Note 2). An initial gross examination of the specimen will help to determine the appropriate steps to follow. The quality of the tumor sample is the most important factor determining the rate of success in obtaining initial growth of tissue explants. Unfortunately, metastatic tumors with the highest growth potential usually have extensive necrosis that interferes with the growth of epithelial and stromal cells. To reduce the effect of tumor necrosis and to increase the rate of success in establishing cell lines of metastatic prostate carcinoma we currently use tissue samples from several areas of each tumor and increase the total number of samples processed. 1. Place the tissue specimen in a sterile 35- to 60-mm dish and gently wash it several times with HBSS, to remove blood and any contaminant from the initial processing. 2. Using sterile forceps and scissors, remove fat and necrotic tissue. 3. Mince the tissue sample into pieces of approx 1 mm3 by using scalpels and/or sharp scissors so that minimal cell damage is done. 4. At this time, note whether single cells are easily released from the tissue by the pressure of the instruments and how firm the tissue is; this will suggest whether the tissue specimen must be enzymatically digested to obtain cell clumps and microexplants. If the tissue is easily disaggregated into cell clumps, then no enzymatic digestion is necessary. Otherwise, add collagenase (40 U/mL) to the growth medium. 5. Monitor the digestion every 2 h (by gently shaking the tube with the digestion mixture), and periodically check cell viability in an aliquot under the microscope (by the trypan blue exclusion assay). Usually tissue specimens from primary tumors require overnight digestion and tissue specimens from metastasis require approx 1–4 h. The duration of digestion can be modified by changing the collagenase concentration. Manipulation of tissue should be minimal and the cells placed in the optimal growth conditions as soon as possible. 6. Collagenase digestion is less harmful to epithelial cells than is digestion with other enzymes (for example, trypsin) but leads to incomplete digestion, so after the enzymatic digestion, digested tissue should be mechanically disaggregated by pipeting up and down with a 10- or 25-mL pipet to obtain small clumps of epithelial cells and microexplants. 7. Although we have obtained better results with microexplants and clumps than with single cells, single cells released during digestion can be collected by allowing clusters to settle. 8. Wash the digestion mixture of the cells, cell clumps, and microexplants by centrifugation (50–100g for 20 seconds [s]) and resuspend the pellet in HBSS. Repeat this process two more times, and then resuspend the cell pellet in growth medium plus 10% FBS. 9. As RBCs in the digested tissue usually interfere with tumor cell survival and attachment, if many RBCs are present, then resuspend the digested tissue in HBSS, and add four volumes (vol) of 1X RBC lysis buffer, incubate it 10 min at room temperature, and centrifuge at 100g for 20 s. Repeat this procedure as necessary, and then resuspend the pellet in HBSS, and repeat the centrifugation and resuspension twice. Finally, resuspend the cell pellet in growth medium plus 10% FBS. 10. Seed the resuspended cells on collagen-coated dishes in growth medium with 10% FBS, at a high cell density, because epithelial cells grow more efficiently when plated at high density and because it is expected that only a low proportion of the cells will grow in vitro.

Samples derived from bone marrow aspiration or biologic fluids (for example, ascites) should be centrifuged (50–100g for 20 s) and the pellet obtained resuspended

124

Navone, Olive, and Troncoso

in HBSS. Repeat this process two more times, and then resuspend the cell pellet in growth medium plus 10% FBS. The sample should be then processed as detailed in steps 9–10.

3.2.2. Tissue Preparation for Injection in Immunodeficient Mice The purpose of this step is to obtain tissue samples of viable neoplastic cells of approx 3–5 mm3. The procedure is as follows: 1. Place the tissue specimen in a sterile 35- to 60-mm dish and gently wash it several times with HBSS, to remove blood and any contaminant from the initial processing. 2. Using sterile forceps and scissors, remove fat and necrotic tissue. 3. Cut the tissue sample into pieces of approx 3–5 mm3 by using scalpels and/or sharp scissors so that minimal cell damage is done.

Samples derived from fine needle aspiration or biologic fluids (for examples, ascites) should be centrifuged (50–100g for 20 s) and the pellet resuspended in HBSS. Repeat this process two more times, and if many RBCs are present the sample should be then processed as detailed in Subheading 3.3.2., step 6. Finally the cell pellet should be resuspended in a minimal volume of growth medium.

3.3. Cell Culture 3.3.1. Background In total, we have processed tissue samples derived from normal prostate, primary prostate cancer of various histologic grades, and prostate cancer tissue from different metastatic sites. Tissues were obtained from surgical specimens or excisional biopsies of distant metastatic sites (32 specimens), incisional biopsies (17 specimens), bone marrow aspiration specimens (12 specimens), ascites (5 specimens), and pleural effusions (2 specimens). Although serum free conditions have been developed to propagate prostate epithelial cells from primary tumors (1–3), in our current tissue-processing protocol, growth and attachment of most cultures derived from metastatic sites require the presence of serum. We grew all specimens in medium supplemented with 10% FBS, monitored the cultures daily, and adjusted the serum concentrations accordingly as detailed in following paragraph, this subheading. In our attempts to grow prostate cancer cells in vitro, we processed each tissue specimen as described in Subheading 3.2., and if enough material was available, we tried several different growth media per specimen. Nine of the surgical specimens or excisional biopsies initially attached and grew, some remained viable for up to four passages, and two human prostate cancer cells lines, MDA PCa 2a and MDA PCa 2b, were established (5). There was no difference in the initial cell growth obtained in samples from primary tumors or metastatic sites, however it must be emphasized that most primary tumors used are androgen independent and have failed multimodality therapy and therefore cannot be compared with success rates using therapy-naive primary tumors. Most tissues derived from biopsies and fine needle aspirations did not render cell growth. The tissue-culture media that most efficiently supported growth of the prostatic cells were RPMI 1640 with additives and BRFF-HPC1 (7).


125

The MDA PCa 2a and MDA PCa 2b lines were derived from a bone metastasis of a prostate cancer that was undergoing androgen independent growth. The processed tissue from which MDA PCa 2a was derived was initially seeded in collagen-coated dishes and grown in RPMI 1640 with additives and 10% FBS. Tissue microexplants attached, but epithelial cells arising from the microexplants formed clumps that remained viable in suspension. After 1 mo, we collected the clumps in suspension and placed them in a collagen-coated dish with BRFF-HPC1 plus 10% FBS. The MDA PCa 2a cells subsequently grow as monolayers. The processed tissue from which MDA PCa 2b was derived was initially seeded in collagen-coated dishes and grown in BRFF-HPC1 supplemented with 10% FBS. The cells grew in monolayer. Normal fibroblasts were also growing as undesired contaminants, so we reduced the FBS to 2% until the fibroblasts died (after about 4 mo) and then increased the FBS back to 10%. For MDA PCa 2a and MDA PCa 2b, using collagen-coated dishes and serum was absolutely necessary for cell growth at the early phases of establishment. For the contents of BRFF-HPC1 see Subheading 2., item 1a. The basic nutrient medium PFMR-4 evolved by modifications of Ham’s F12 and differs from F12K mainly by the addition of HEPES, replacement of cysteine with cystine, and reduction in the osmolarity to 280 mOsm/kg (8,11). PFMR-4 basal medium was demonstrated to be better at supporting growth of prostate cancer cells than other types of basal media (8,9). Previous reports have demonstrated that the addition of insulin, cholera toxin, and EGF improves growth of prostate cancer cells in vitro (8,9), although those results were density dependent. Subsequent studies demonstrated that addition of bovine pituitary extract and hydrocortisone to the growth medium substantially improved prostate cell growth in vitro (3). Similar growth requirements were described by McKeehan et al. (12,13) for epithelial cells derived from normal and tumor tissue from the rat prostate (12,13). Hydrocortisone, insulin, transferrin, estradiol, and selenium (HITES) is a modification of RPMI 1640 (6,14) that was originally developed as a selective agent for growing small cell lung cancer cells. We have used a modified version of RPMI 1640 with insulin, sodium selenite, and hydrocortisone alone. MDA PCa 2a cells (5) were established with this combination and the LNCaP prostate cancer cell line (15) was established with RPMI 1640. This suggests that this basal medium formulation favors the growth of prostate cancer cells from metastatic sites.

3.3.2. Recommended Procedures for Cell Growth 1. If enough tissue is available, try several tissue-culture conditions for each specimen. We recommend using BRFF-HPC1, RPMI-1640 with additives, and F12K with supplements, all supplemented with 10% FBS. 2. After seeding, allow the cells to attach for 3–4 d without any further manipulation. 3. Then, examine cell cultures by phase contrast microscopy to assess cell viability, attachment of cell clumps and microexplants to the dishes, and outgrowth of epithelial cells and/or fibroblast-like cells (see Note 3). Also, as we have observed that some prostate cancer cells survive for long periods of time in suspension, look for viable cells in the culture medium. The following outcomes can be observed:

126

Navone, Olive, and Troncoso a. Microexplants with outgrowths of epithelial cells (Fig. 1A). When this is observed, the culture conditions in that particular dish are probably appropriate, the medium should be changed with fresh medium every 4–6 d, and the culture should be monitored every 3–4 d. If cell colonies with fibroblast-like morphology appear (Fig. 1B), reduce the concentration of FBS to 2–5% and closely monitor the epithelial cells for viability. b. Microexplants attach to the dish, and there is no outgrowth of epithelial cells, but clumps of epithelial cells are released to the medium (Fig. 1C). These clumps appear round and shiny under the phase contrast microscopy, which indicates they are viable (Fig. 1D). The culture should be collected, centrifuged, resuspended in growth medium plus 10% FBS, and placed back in the same dish, which will avoid excessive dilution of cells. If the number of floating clumps increases after several changes of medium, then seed the floating clumps into another dish with a different growth medium plus 10% FBS. Closely monitor the cells to ensure there is no lose of viability. If enough cells are available, seed viable cells in three different growth media with 10% FBS. c. Cell clumps derived from microexplants or directly from digested tissue attach and show signs of mitosis (Fig. 1E and 1F). Add fresh medium every 4–6 d and closely monitor the culture. If cell colonies with fibroblast-like morphology appear (Fig. 1B), reduce the concentration of FBS to 2–5% and closely monitor the epithelial cells for cell viability.

4. If these procedures do not render cell growth or attachment, try combinations of the methods described in steps 1–3 and additions or subtraction of various factors (for example, hydrocortisone) to obtain cell growth. Monitor the cultures daily to determine course of action. 5. Allow the cells to grow until semiconfluent before they are subcultured or frozen. The split ratio after subculture will depend on the doubling time of the cell line; in general, low-passage cell lines have a long doubling time, and therefore a ratio of 1/2 is recommended. If the cells grow very slowly and more than one dish is available, we suggest splitting one dish 1/1 before the culture is subconfluent. This will prevent microbial contamination (which is likely to occur when a culture is maintained for a long period of time in the same dish), and may also stimulate cell growth. Routinely document cell morphology and manipulation of cultures, and freeze cells at each passage. 6. For subculture, use trypsin/EDTA and the following standard procedure (6). a. b. c. d.

Add enough trypsin/EDTA to cover the culture dish. Leave it for 15–30 s. Withdraw the excess trypsin/EDTA (make sure the cells have not detached). Incubate the dish at room temperature, and monitor cells rounding up by microscopy. e. Add growth medium plus 10% FBS and resuspend the cells by repeatedly pipeting over the surface of the culture dish. f. Transfer the resuspended cells to a centrifuge tube, rinse the dish with HBSS, and add the rinse to centrifuge tube. g. Centrifuge the cells (50–100g for 20 s) and resuspend the pellet in HBSS. Repeat the process two more times, and then resuspend cell pellets in growth medium plus 10% FBS and transfer it to collagen-coated dishes.


127

Fig. 1. Phase-contrast micrographs of cell cultures derived from human prostate cancers. (A) Outgrowth of prostate cancer epithelial cells after 2 wk of incubation of a primary microexplant. The undisaggregated tissue fragment (primary microexplant) is seen as a dense area in the center. Original magnification ⫻120. (B) A relatively pure fibroblastic area in a human prostate cancer culture at passage 4. Original magnification ⫻200. (C) Primary microexplant from human prostate cancer (a dense area in the center), with human prostate cancer cell clumps (asterisk) arising from the microexplant and remaining in suspension. Fibroblast-like cells are also seen growing in the dish. Original magnification ⫻100. (D) Human prostate cancer cell clumps in suspension. Note that the cells are shiny, indicating that they are viable. Original magnification ⫻200. (E,F) Early passages of human prostate cancer cells derived from metastatic sites. Original magnification ⫻100.

128


3.3.3. Experimental Alternatives to Improve Prostate Cancer Cell Growth In Vitro Classic research in tumor biology has focused on the cancer cells directly, but over the last years, it has become increasingly clear that the cellular microenvironment also has an important role in tumor progression (16). Fibroblasts from normal breasts have been found to inhibit the growth of nontumorigenic mammary epithelial cells, although fibroblasts from cancerous breasts stimulated proliferation (17); similar results have been found in coculture experiments with prostate cells (16,17). The metastatic dissemination pattern of prostate cancer is unique in that it has a predilection for bone in about 80% of cases—with a tendency to develop bone metastases as the only site of progression. This suggests that the bone microenvironment may provide growth stimulating factors for prostate cancer cells (18,19). In agreement with this hypothesis, previous work by L. W. Chung and colleagues showed that prostate- and bone-derived fibroblasts (nontumorigenic fibroblasts from an osteogenic sarcoma) accelerated the growth of prostate cancer cells in vivo and were mitogenic for prostate cancer cells in vitro (20). The use of prostate- and bone-derived fibroblasts in coculture with prostate cancer cells may therefore be of use to increase the growth potential of prostate cancer cells in vitro. Prostate cancer is also unique in that it is the only malignancy that consistently produces osteoblastic bone metastases (18,19), suggesting an interaction between prostate cancer cells and cells of the osteoblast linage. We have established an in vitro model of bone metastases using MDA PCa 2a and MDA PCa 2b cell lines (21). The model consists of a bicompartmental coculture system of primary mouse osteoblasts and human prostate cancer cells. In this system the cells share medium but are not in physical contact. Using this system, we found that bone-derived MDA PCa 2a and MDA PCa 2b prostate cancer cells induce osteoblast growth and differentiation (21), we also found that DNA synthesis was increased in these prostate cancer cells in coculture with primary mouse osteoblasts (unpublished results). These findings suggest the existence of a paracrine loop between bone forming prostate cancer cells and primary mouse osteoblasts. This may also be a suitable approach to optimize prostate cancer growth in vitro.

3.4. Human Prostate Cancer Xenografts 3.4.1. Background We have processed 68 tissue specimens derived from prostate cancer and have injected samples of the processed specimens into athymic (nude) and SCID mice to obtain in vivo tumor growth. We have processed 24 surgical specimens or excisional biopsies of distant metastatic sites, 23 incisional biopsies, 11 bone marrow aspirates, 4 ascites, and 6 pleural effusions. We obtained in vivo tumor growth of metastases in 12 of the 24 surgical specimens or excisional biopsies, 3 of 23 excisional biopsies, none of the bone marrow aspirates, one from the ascites, and one from pleural effusions (see Note 4). No difference in the initial in vitro cell growth or in vivo propagation was found in specimens derived from therapy resistant primary tumors or metastases. There was no


129

difference in the in vivo cell growth obtained with samples from primary tumors or the different metastatic sites. Most primary tumors that are used have failed therapy and therefore cannot be compared with the success rate of therapy-naive primary tumors (see Note 5). These results indicate that biopsies and fine needle aspirations do not yield significant cell growth in vivo, and therefore surgical specimens or excisional biopsies should be used as a source of tissue whenever possible.We have used nude and SCID mice and found no difference in tumor yield under our protocol.

3.4.2. Recommended Procedure for In Vivo Cell Growth 1. Anesthetize immunodeficient mice (100 mg/kg ketamine + 2.5 mg/kg acepromazine intraperitoneal). 2. Using sterile scalpel make a small incision in the right axilla area. 3. Using sterile forceps make a small subcutaneous pocket through the incision. 4. Mix tumor pieces with Matrigel (1/1, v/v) and place it in the subcutaneous pocket. 5. Close subcutaneous incision with wound clips and monitor mice until they are able to flee or defend themselves. 6. Monitor mice twice weekly for tumor bulk.

Whenever a cell suspension is available for injection, mix it with Matrigel (1/1, v/v), aspirate mixture into a syringe, and inject up to 100 µL of cell suspension subcutaneously into the axilla area.

3.5. Alternatives for Cell Culture The basal medium PFMR-4A with supplements has been used as a serum free medium for propagating normal and cancer cells from primary tumors (1). PFMR-4A is also a modification of PFMR-4 containing 10 times more isoleucine, leucine, threonine, glutamine, inositol, thymidine, and methionine, and no trace elements (1,22). The supplements used are similar to those used with BRFF-HPC1 but the hydrocortisone concentration is a 100-fold less, there is no dihydrotestosterone, and α-tocopherol, and retinoic acid are included (1). McKeehan and colleagues (12,13,24) developed the nutrient medium WAJC 401, which contains insulin, EGF, cholera toxin, BPE, prolactin, and dexametasone and supports rapid proliferation of normal and tumor epithelial cells from rat prostate. WAJC 401 is a modification of MCDB 151 (24) and differs from PFMR-4A mainly in its lower calcium concentration (1).

3.6. Pitfalls A recent publication reported that two cell lines thought to be from prostatic cancer (TSU-Pr1 and Jca-1) may in fact be derivatives of T24 bladder carcinoma cells (25). Moreover, it has also been suggested that other prostate cancer cell lines share common origins (26,27). The discovery of cross-contamination of many cell lines with HeLa cells (28,29) was the first clear evidence that cell lines with very short doubling times can contaminate other cell lines. This is a particular concern for lowpassage cultures with long doubling times, because a small number of cells can inadvertently be transferred from a rapidly growing cell line into the slower culture and easily overgrow it. Accidental transfer can occur if a pipet touches the neck of a

130


bottle of medium or by the formation of aerosols in the tissue-culture hood when flasks are open. To avoid cross-contamination, dedicate a tissue-culture hood to handling primary cultures and low-passage cell lines. If this is not possible, then, in addition to the standard procedures of good practice in a tissue-culture facility (6), the following guidelines should be enforced: only one cell line should be used in a tissue-culture hood at any one time, the hood should be cleaned before the introduction of another cell line, bottles or aliquots of medium should be dedicated for use with only one cell line, and fast-growing cell lines should be handled at the end of the day.

3.7. Assessment of Cell Type and Prostate-Specific Markers, Authentication of Origin, and Characterization of a New Cell Line The epithelial origin of the cells can be verified by their morphology and keratin expression. Expression of specific keratins is often altered by cell culture; therefore, we recommend using pan-keratin antibodies that recognize many cytokeratins. Cultured cells can be immunostained by using the avidin-biotin-peroxidase complex technique. The cell cultures also should be further characterized by immunological analysis of the tissue-specific markers prostate specific antigen and prostatic acid phosphatase. Because of the potential cross-contamination, it is important to store samples of the normal tissue or DNA from the cell line source to allow for future authentication by DNA fingerprinting. It is also desirable to obtain a DNA fingerprint or profile of the cell line before it is used. The cultures should also be characterized cytogenetically (by G-banding or fluorescence in situ hybridization), and their population doubling time, colony-forming efficiency, morphology under phase-contrast microscopy, and tumorigenic potential in immune-deficient mice should be determined. Finally, screening for mycoplasma contamination is essential and should be performed routinely.

4. Notes 1. A tissue culture facility to propagate prostate cancer specimens must be based on a coordinated, multidisciplinary effort to obtain fresh tissue. 2. At the time the specimen is received, sampling and selection must be implemented through histopathological assessment of viable cells in the fresh specimen. Close interaction with the attending physician helps to incorporate the benefit of clinical observations into the culture conditions. 3. Two frequent contaminants have to be considered. One is normal epithelial cells, which (under serum-free conditions) may be selected for when a primary tumor is being cultured. Primary tumors frequently are surrounded by normal prostate tissue and the culture conditions do not select against normal prostate epithelial cells. The normal epithelial cells can overgrow the cancer cells in culture. The best way to avoid this is to use a tissue sample in which tumor cells predominante. At present, there are no markers for identifying prostate cancer cells in vitro, but molecular cytogenetics methods can be used to assess whether genetic gains or losses present in the original tumor are present in the cell culture. In any case, the final proof of the origin of an epithelial cell culture is that only cancerderived epithelial cells will become immortal (grown for more than 20 passages in vitro).


131

A second major contaminant is stromal cells. Prostate cancer is multifocal and is frequently surrounded by fibroblasts and/or smooth muscle cells. When the tumor is from a metastatic site, the most common contaminants are fibroblasts, which can usually be easily identified by the expert eye on phase-contrast microscopy (Fig. 1B). We described some techniques earlier to select for the epithelial component. The most important technique is to monitor the culture daily and try alternative procedures such as reducing the serum concentration, the selective adhesion technique (after 2–4 h of subculture, when the fibroblasts will have attached, harvest the epithelial cells by gently washing the culture with HBSS, and transfer the epithelial cells to a new dish), and the selective detachment technique (briefly expose the culture to trypsin, which will release fibroblasts more readily than epithelial cells, and then gently wash the culture with HBSS and transfer to a new dish). 3. In our experience fine needle aspirations do not constitute a suitable source of cells to obtain growth in vitro or in vivo. 4. No difference in the initial in vitro cell growth or in vivo propagation was found in specimens derived from therapy-resistant primary tumors or metastases.

References 1. Peehl, D. M. (1992) Culture of human prostatic epithelial cells. In: Freshney, R. A. (ed.) Culture of Epithelial Cells, Wiley-Liss, New York, pp. 159–180. 2. Chaproniere, D. M. and McKeehan, W. L. (1986) Serial culture of single adult human prostatic epithelial cells in serum-free medium containing low calcium and a new growth factor from bovine brain. Cancer Res. 46, 819–824. 3. Peehl, D. M. and Stamey, T. A. (1986) Growth response of normal, benign hyperplastic, and malignant human prostatic epithelial cells in vitro to cholera toxin, pituitary extract, and hydrocortisone. The Prostate 8, 51–61. 4. Navone, N. M., Logothetis, C. J., von Eschenbach, A. C., and Troncoso, P. (1999) Model systems of prostate cancer: uses and limitations. Cancer Met. Rev. 17, 361–371. 5. Navone, N. M., Olive, M., Ozen, M., et al. (1997) Establishment of two human prostate cancer cell lines derived from a single bone metastasis. Clin. Cancer Res. 3, 2493–2500. 6. Freshney, R. I. (ed.) (1994) Culture of Animals Cells: A Manual of Basic Techniques, 3rd ed. Wiley-Liss, Inc., New York, pp. 51–59, 86–88, 153–156, 353. 7. Iype, P. T., Iype, L. E., Verma, M., and Kaighn, E. (1998). Establishment and characterization of immortalized human cell lines from prostatic carcinoma and benign prostatic hyperplasia. Int. J. Oncol. 12, 257–263. 8. Kaighn, M. E., Kirk, D., Szalay, M. and Lechner, J. F. (1981) Growth control of prostatic carcinoma cells in serum free media: interrelationship of hormone response, cell density and nutrient media. Proc. Natl. Acad. Sci. USA 78, 5673–5676. 9. Peehl, D. M. and Stamey, T. A. (1984) Serial propagation of adult human prostatic epithelial cells with cholera toxin. In vitro 20, 981–986. 10. Lechner, J. F., Babcook, M. S., Marnell, M., Shankar Narayan, K., and Kaighn, M. E. (1980) Normal human prostate epithelial cell culture. In: Harris, C. C., Trump, B. F., Stoner, G. D. (eds.) Normal Human Tissue and Cell Culture. B. Endocrine, Urogenital, and Gastrointestinal Systems. Methods in Cell Biology, vol. 21B, Academic Press, London, pp.195–225. 11. Kaighn, M. E. (1973) Human liver cells. In: Kruse, P. F. and Patterson, M. D. (eds.) Tissue Culture Methods and Applications. pp. 54–58.

132


12. McKeehan, W. L., Adams, P. and Fast, D. (1987) Different hormonal requirements for androgen independent growth of normal and tumor epithelial cells from rat prostate. In Vitro Cell Dev. Biol. 23, 147–152. 13. McKeehan, W. L., Adams, P. S. and Rosser, M. P. (1984) Direct mitogenic effects of insulin, epidermal growth factor, glucocorticoid, cholera toxin, unknown pituitary factors and possibly prolactin, but not androgen, on normal rat prostate epithelial cells in serumfree, primary cell culture. Cancer Res. 44, 1998–2010. 14. Carney, D. N., Bunn, P. A. Jr., Gazdar, A. F., Pagan, J. A., and Minna, J. D. (1981) Selective growth in serum-free hormone-supplemented medium of tumor cells obtained by biopsy from patients with small cell carcinoma of the lung. Proc. Natl. Acad. Sci. USA 78, 3185–3189. 15. Horoszewicz, J. S., Leong, S. S., Kawinski, E., et al. (1983) LNCaP model of human prostatic carcinoma. Cancer Res 43, 1809–1818. 16. Radisky, D., Hagios, C., and Bissell, M. J. (2001) Tumors are unique organs defined by abnormal signaling and context. Semin. Cancer Biol. 11, 87–95. 17. Olumi, A. F., Grossfeld, G. D., Hayward, S. W., et al. (1999) Carcinoma-associated fibroblasts direct tumor progression of initiated human prostatic epithelium. Cancer Res. 59, 5002–5011. 18. Cook, G. B. and Watson, F. R. (1968) Events in the natural history of prostate cancer: using salvage curves, mean age distributions, and contingency coefficients. J. Urol. 96, 87–96. 19. Boyce, B. F., Yoneda T., and Guise T. A. (1999) Factors regulating the growth of metastatic cancer in bone. Endocr. Relat. Cancer 6, 333–347. 20. Gleave, M., Hsieh, J. T., Gao, C., von Eschenbach, A. C. and Chung, L. W. K. (1991) Acceleration of human prostate cancer growth in vivo by factors produced by prostate and bone fibroblasts. Cancer Res. 51, 3753–3761. 21. Yang, J., Fizazi, K., Peleg, S., et al. (2001) Prostate cancer cells induce osteoblast differentiation through a Cbfa1-dependent pathway. Cancer Res. 61, 5652–5659. 22. Peehl, D. M. and Stamey, T. A. (1986) Serum-free growth of adult human prostatic epithelial cells. In vitro Cell Devel. Biol. 22, 82–90. 23. McKeehan, W. L., Adams, P. S. and Rosser, M. P. (1981) Modified nutrient medium MCDB 151, defined growth factors, cholera toxin, pituitary factors, and horse serum support epithelial cell and suppress fibroblast proliferation in primary cultures of rat ventral prostate cells. In vitro 18, 87–91 24. Peehl, D. M. and Ham, R. G. (1980) Clonal growth of human keratinocytes with small amounts of dialyzed serum. In vitro 16, 526–538. 25. van Bokhoven, A., Varella-Garcia, M., Korch, C. and Miller, G. J. (2001) TSU-Pr1 and JCA-1 cells are derivatives of T24 bladder carcinoma cells and are not of prostatic origin. Cancer Res. 61, 6340–6344. 26. van Bokhoven, A., Varella-Garcia, M., Korch, C., Hessels, D. and Miller, G. J. (2001) Widely used prostate carcinoma cell lines share common origins. Prostate 47, 36–51. 27. Varella-Garcia M., Boomer, T. and Miller, G. J. (2001) Karyotypic similarity identified by multiplex-FISH relates four prostate adenocarcinoma cell lines: PC-3, PPC-1, ALVA31, and ALVA-41. Genes Chromosomes Cancer 31, 303–315. 28. Gartler, S. M. (1967) Genetic markers as tracers in cell culture. Second Bicennial Review Conference on Cell Tissue and Organ Culture. NCI Monographs, pp. 167–195. 29. Nelson-Rees, W. A. and Flandermeyer, R. R. (1977) Inter- and intraspecies contamination of human breast tumor cell lines HBC and BrCa5 and other cell cultures. Science 195, 1343–1344.

Ovarian Cancer Cell Lines

133

11 Isolation and Culture of Ovarian Cancer Cell Lines Simon P. Langdon 1. Introduction Ovarian cancer is the leading cause of death from cancer of the female reproductive system with 1 in every 70 women developing the disease. In the United States for the year 2000, there were projected to be approx 23,000 diagnoses and 14,000 deaths from ovarian cancer (1). Most patients present with disease that has advanced beyond the ovaries, and although the majority of patients will show an initial response to chemotherapy, virtually all patients with advanced disease at presentation will die. Human ovarian cancer cell lines have provided valuable model systems to study a variety of tumor characteristics, including cellular biology, genetics, and chemosensitivity. A large number of ovarian cancer cell lines have been established and many of these are in widespread use (Table 1; 2–18). Some examples are illustrated in Fig. 1. These models reflect the diverse characteristics found in clinical specimens such as a varying response to chemotherapy and differing p53 status. Although ovarian cancer cell lines have been obtained from primary tumors, solid metastatic deposits, and pleural effusions (Table 1), most have been derived from the peritoneal ascites of ovarian cancer patients. Ascitic fluid provides a convenient source of tumor cells and may be more readily available than primary or metastatic material as it is routinely drained to alleviate discomfort. Furthermore, these cells are more likely to be primed for in vitro culture, as they are already surviving as single cells or small clusters, thus avoiding the need for mechanical or enzymatic disaggregation. The cell mixture contains not only malignant carcinoma cells but also lymphocytes, macrophages, red blood cells, mesothelial cells, and fibroblasts. The use of differential centrifugation and trypsinization techniques allow relatively pure populations of carcinoma cells to be selected within several passages. These new cell lines can then be characterized to verify epithelial origin and the degree of contamination by non-epithelial cells can be assessed by the use of antibodies targeted to lymphocytes and fibroblasts.

From: Methods in Molecular Medicine, vol. 88: Cancer Cell Culture: Methods and Protocols Edited by: S. P. Langdon © Humana Press Inc., Totowa, NJ

133

134

Langdon

Table 1 Properties of Established Ovarian Carcinoma Cell Lines Cell Line

Histology

Source

Prior Treatment

Ref

41M 59M 138D 180D 200D 253D A2780 CAOV-3 CAOV-4 CH1 COLO 110 COLO 316 COLO 319 COLO 330 DO-s EFO-21 EFO-27 ES-2 HOC-1 HOC-7 HTOA IGROV1 OAW 28 OAW 42 OV-90 OV-1063 OvBH-1 OVCAR-2 OVCAR-3 OVCAR-4 OVCAR-5 PE01 PE04 PE06 PE014 PE016 PE023 PEA1 PEA2 SKOV-3 SMOV-2 T014 TOV-112D TOV-21G

Adenoca Endometr adenoca Serous adenoca Adenoca Serous adenoca Serous adenoca Carcinoma Adenoca Adenoca Papillary adenoca Serous adenoca Serous adenoca Serous adenoca Serous adenoca WD mucinous adenoca Dediff serous adenoca Mucinous papillary adenoca PD clear cell ca WD serous adenoca WD serous adenoca WD serous adenoca Adenoca Adenoca Serous adenoca Serous papillary adeno Papillary adenoca Clear cell ca Adenoca PD papillary adenoca Adenoca Adenoca PD serous adenoca PD serous adenoca PD serous adenoca WD serous adenoca PD serous adenoca WD serous adenoca PD adenoca PD adenoca Adenoca Clear cell adenoca WD serous adenoca Endometr adenoca Clear cell ca

Ascites Ascites Ascites Ascites Solid Ascites — Tumor Fallopian met Ascites Sol met Pleural Ascites Ascites Ascites Ascites Omentum Primary Ascites Ascites Primary Primary Ascites Ascites Ascites Ascites Ascites Ascites Ascites Ascites Ascites Ascites Ascites Ascites Ascites Ascites Ascites Pleural Ascites Ascites Primary Sol met Primary Primary

None None Carb P None Cy/MPA None Cy/Adr/FU — P/Carb None None None Mel/Radiother — — — None None None None None P/Mel P — Cy/Adr/P/HMM None P/Cy P/Cy/Adr P/Cy/Adr None P/FU/CHL P/FU/CHL P/FU/CHL None Radioth P/CHL None P/Pred T — None — —

2 3 2 2 2 2 4 5 — 3 6 6 6 6 7 8 8 9 5 5 10 11 3 3 12 13 14 15 16 17 18 19 19 20 20 20 20 20 20 21 22 20 12 12

Adenoca, adenocarcinoma; Adr, adriamycin; Carb, carboplatin; CHL, chlorambucil; Cy, cyclophosphamide; FU, 5-fluorouracil; HMM, hexamethylmelamine; Mel, melphalan; met, metastasis; MPA, medroxyprogesterone actetate; P, cisplatin; PD, poorly differentiated; pleural, pleural effusion; Pred, prednimustine; Radioth, radiotherapy; Sol met, solid metastasis; T, thiotepa; WD, well differentiated.


135

Fig. 1. Phase contrast micrographs of the PE01 and SKOV-3 ovarian cancer cell lines.

Once established, many ovarian cancer cell lines can be grown in fully defined media allowing detailed analysis of the influences of regulatory molecules, e.g., the effects of hormones, growth factors, cytokines, or the impact of therapeutic molecules, for example, cisplatin among the cytotoxic drugs.

2. Materials 1. Culture medium: RPMI 1640 medium (Life Technologies, Paisley, Scotland), 10% fetal calf serum (FCS; Life Technologies), 100 U/mL penicillin/100 µg/mL streptomycin (Gibco-BRL, Life Technologies). 2. 2 mM sodium pyruvate (Sigma). 3. 2.5 µg/mL insulin (Sigma). 4. Phosphate buffered saline (PBS), pH 7.4. 5. Histopaque (Sigma). 6. Trypsin (0.05% w/v)/EDTA (0.02% w/v) in PBS.

3. Methods 3.1. Initial Culturing from Ascites 1. Transfer freshly obtained ascitic fluid drained from the peritoneum of an ovarian cancer patient (at the time of paracentesis or staging laparotomy) to a sterile environment , for example, class II hood (see Notes 1 and 2). The average volume collected from any individual patient is approx 1 L. 2. Centrifuge the fluid for 20 min at 2000g and 4°C to produce a cell pellet. 3. Discard the fluid and resuspend the cell pellet in 20 mL PBS. 4. Red blood cells are removed by Histopaque (Sigma). Place the 10 mL tumor cell suspension carefully onto Histopaque (10 mL) in a Universal container and centrifuge at 2000g for 30 min at room temperature.The tumor cells remain at the interface of the Histopaque. Remove by pastette and transfer to a new Universal container. 5. Resuspend the cell pellet in 10 mL PBS and centrifuge at 1000g for 10 min. Repeat this wash once. 6. Resuspend the cells in tissue culture medium (see Notes 3–6).

136

Langdon

7. Take a cell count. Culture aliquots of 105 cells/mL (10 mL/25 cm2-tissue culture flask) at 37°C, 100% humidity and 5% CO2 in a tissue culture incubator. Attachment of cells to the plastic substrate occurs and eventually a monolayer will form. 8. At this initial phase of establishment, cells require careful monitoring (by microscope) since growth is variable. For example, during the establishment of the PE01 and PE04 cell lines, subculturing took place after 21 and 4 wk respectively (1). Tissue culture medium should be replaced 2–3 times/wk

3.2. Initial Culturing from Solid Primary Tumor or Metastatic Deposit 1. Obtain primary or secondary tumor material at the time of surgery. Transfer fragments of the tumor as rapidly as possible into a sterile Universal container containing RPMI 1640 and place on ice to maintain viability. 2. Transfer the Universal container to a sterile environment (for example, a class II hood). Dissociate tumor fragments either mechanically using crossed scalpel blades (SwannMorton, Sheffield, England) or enzymatically (see Note 7). After either mechanical or enzymatic disassociation, filter cell suspensions through a sterile gauze to remove clumps. 3. The cell suspension is then processed according to Subheading 3.1., steps 6–8.

3.3 Maintenance and Development of Cell Lines After initial culturing, careful monitoring is needed to determine the level of contamination by fibroblasts. Although fibroblasts will cease proliferating after a number of generations, they may outgrow the carcinoma cells if the initial percentage of fibroblasts is too high.

3.3.1. Removal of Fibroblasts 1. Selective trypsinization can remove most of the fibroblast population. Fibroblasts detach rapidly from plastic after trypsinization and a short treatment (< 2 min) with 0.05% (w/v) trypsin/0.02% (w/v) EDTA will remove many of the fibroblasts before the carcinoma cells detach. Fresh media containing serum will then rapidly inactivate remaining trypsin. 2. Fibroblasts attach to plastic more rapidly than the epithelial cells and those cells that attach within the first 2–3 h are predominantly fibroblasts. If the cell suspension is transferred to a new flask after this period, many of the fibroblasts will remain in the original flask, which can then be discarded. 3, Monoclonal antibodies targeted to fibroblast-specific antigens (for example, Thy-1) can allow selective removal of the fibroblasts when in cell suspension. 4. If sufficient numbers of clusters of carcinoma cells initially adhere to the plastic substrate then the surrounding fibroblasts can be scraped off with a plastic scraper. Colonies can be indicated by use of a marker pen on the base of the flask.

3.3.2. Removal of Mesothelial Cells Mesothelial cells may also be present and these can be removed as follows. Mesothelial cells but not epithelial cells attach to fibrin meshes that are produced on initial culturing. A short exposure to trypsin/EDTA (2 min) produces complete detachment of the mesothelial cell sheet attached to the fibrin mesh without removing epithelial islands.

3.4. Subculturing and Characterization of Cultures 1. When the cell culture approaches confluence, it should be subcultured. Remove tissue culture medium and wash cells with 20 mL PBS.


137

2. Add Trypsin/EDTA to the flask for 5–15 min to detach cells. 3. Once cells are in suspension, place into fresh serum/medium and transfer to another flask (see Note 8). 4. After several passages, the fibroblasts, lymphocytes, and mesothelial cells should have disappeared and only carcinoma cells remain. At this stage it is appropriate to confirm the epithelial nature of these cells. Place a small aliquot of cells onto a multispot slide and stain by standard immunocytochemical methods. There are many monoclonal antibodies that can be used for the purpose of identifying specific cell types and we have found the following antibodies to be useful: E29 (Dako, Cambridge, England) targeting epithelial membrane antigen will identify epithelial cells; 2B11 (Dako) targeting leucocyte common antigen (CD45) will identify lymphocytes; 5B5 (Dako) targeting the β subunit of prolyl-4-hydroxylase and the disulphide isomerase will identify fibroblasts. 5. More detailed assessments of antigen expression may be valuable. Expression of specific cytokeratins and other epithelial markers including human milk fat globulin-2 (HMFG2) and OC 125 (detected by CA125) are often measured. 6. Other useful characterization procedures include DNA profiling and karyotyping. 7. Regular testing for mycoplasma contamination is also advised, e.g., by PCR identification or by staining with Hoechst 33528 dye and viewing under a fluorescent microscope, or by standard microbiological techniques.

4. Notes 1. All ascitic samples should be treated with care and all procedures carried out within class II containment facilities. 2. Heparin has also been widely used to prevent cell aggregation and can be added directly to the initial ascites fluid (10,000 U/L ascites). 3. The choice of specific medium has varied widely among different laboratories. RPMI 1640, DMEM, Ham’s F-12 and α-MEM have all been used as the basic medium and the choice depends mainly on the medium in use within the laboratory establishing the cell line. The use of Ham’s F12 has also enabled cell lines to develop which otherwise were destined to die (2). 4. The use of additives has also varied widely among different laboratories. In addition to the presence of serum and medium, antibiotics are routinely added and most popular are penicillin and streptomycin, although 50 µg/mL gentamicin and 2.5 µg/mL amphotericin have also been used. Other standard additives for early cultures include insulin and pyruvate. Historically, extra glutamine was often added to the media but formulations in current use are more stable. 5. The portion of FCS used has commonly been 10%. Some cell lines have been recorded as initially growing in 10% but then deteriorating and this effect was prevented by a reduction to 5% serum (2). 6. The use of autologous human ascitic filtrate may help the establishment and growth of the cell line. This can be added to the media at a level of 10%. 7. Disaggregation of solid tumors can be accomplished either mechanically or enzymatically. The simple use of crossed scalpels is easy and if adequate numbers of small clusters of cells are produced then this is sufficient to generate a cell line. Enzymatic digestion will typically yield a two- to sevenfold greater yield of single viable cells. A number of “enzyme cocktails” have been described and the following have all been used to establish ovarian cancer cell lines: 0.8 g/100 mL collagenase II (Sigma; EC 3.4.23.3), 0.002 g/ 100 mL DNase I (Sigma; EC 3.1.21.1), and 500 U/mL pronase (Boehringer Mannheim).

138

Langdon

8. Subculture in the early stages should involve a split ratio of 1/2 or 1/3; eventually this can be increased to 1/5 to 1/10.

References 1. American Cancer Society: Statistics for 2001: Cancer Facts and Figures 2001. http:// www.cancer.org. 2. Wilson, A. P., Dent, M., Pelovic, T., Hubbold, L., and Radford, H. (1996) Characterisation of seven human ovarian tumour cell lines. Br. J. Cancer 74, 722–727. 3. Hills, C. A., Kelland, L. R., Abel, G., Siracky, J., Wilson, A. P. and Harrap, K. R. (1989) Biological properties of ten human ovarian carcinoma cell lines: calibration in vitro against four platinum complexes. Br. J. Cancer 59, 527–534. 4. Behrens, B. C., Hamilton, T. C., Masuda, H., et al. (1987) Characterization of a cisdiamminedichloroplatinum(II)-resistant human ovarian cancer cell line and its use evaluation of platinum analogues. Cancer Res. 47, 2414–2418. 5. Buick, R. N., Pullano, R., and Trent, J. M. (1985) Comparative properties of five human ovarian adenocarcinoma cell lines. Cancer Res. 45, 3668–3676. 6. Woods, L. K., Morgan, R. T., Quinn, L. A., Moore, G. E., Semple, T. U., and Stedman, K. E. (1979) Comparison of four new cell lines from patients with adenocarcinoma of the ovary. Cancer Res. 39, 4449–4459. 7. Briers, T. W., Stroobants, P., Vandeputte, T. M., et al. (1989) Establishment and characterization of a human ovarian neoplastic cell line DO-s. Cancer Res. 49, 5153–5161. 8. Simon, W. E., Albrecht, M., Hansel. M., Dietel, M., and Holzel, F. (1982) Cell lines derived from human ovarian carcinomas: growth stimulation by gonadotropic and steroid hormones. J. Natl. Cancer Inst. 70, 839–845. 9. Lau, D. H., Lewis, A. D., Ehsan, M. N., and Sikic, B. I. (1991) Multifactorial mechanisms associated with broad cross-resistance of ovarian carcinoma cells selected by cyanomorpholino doxorubicin. Cancer Res. 51, 5181–5187. 10. Ishiwata, I., Ishiwata, C., Soma, M., Nozawa, S., and Ishikawa, H. (1987) Characterization of newly established human ovarian carcinoma cell line—special reference of the effects of cis-platinum on cellular proliferation and release of CA125. Gynecol. Oncology 26, 340–354. 11. Benard, J., Da Silva, J., De Bois, M-C., Boyer, P., et al. (1985) Characterization of a human ovarian adenocarcinoma line, IGROV1, in tissue culture and in nude mice. Cancer Res. 45, 4970–4979. 12. Provencher, D. M., Lounis, H., Champoux, L., et al. (2000) Characterization of four epithelial cancer cell lines. In vitro Cell. Dev. Biol. Anim. 36, 357–361. 13. Horowitz, A. T., Treves, A. J., Voss, R., et al. (1985). A new human ovarian carcinoma cell line: establishment and analysis of tumor-associated markers. Oncolology 42, 332–337. 14. Bar, J. K. and Harlozinska, A. (2000) Morphological and phenotypic characterization of a newly established ovarian carcinoma cell line (OvBH-1). Anticancer Res. 20, 2975–2980. 15. Pirker, R., FitzGerald, D. J., Hamilton, T. C., et al. (1985) Characterization of immunotoxins active against ovarian cancer cell lines. J. Clin. Invest. 76, 1261–1267. 16. Hamilton, T. C., Young, R. C., McKoy, W. M., et al. (1983) Characterization of a human ovarian carcinoma cell line (NIH:OVCAR-3) with androgen and estrogen receptors. Cancer Res. 43, 5379–5389. 17. Louie, K. G., Behrens, B. C., Kinsella, T. J., et al. (1985). Radiation survival parameters of anti-neoplastic drug-sensitive and -resistant human ovarian cancer cell lines and their modification by buthionine sulfoximine. Cancer Res. 45, 2110–2115.


139

18. Louie, K. G., Hamilton, T. C., Winker, M. A., et al. (1986) Adriamycin accumulation and metabolism in adriamycin-sensitive and -resistant human ovarian cancer cell lines. Biochem. Pharmacol. 35, 467–472. 19. Wolf, C. R., Hayward, I. P., Lawrie, S. S., et al. (1987). Cellular heterogeneity and drug resistance in two ovarian adenocarcinoma cell lines derived from a single patient. Int. J. Cancer 39, 695–702. 20. Langdon, S. P., Lawrie, S. S., Hay, F. G., et al. (1988) Characterization and properties of nine human ovarian adenocarcinoma cell lines. Cancer Res. 48, 6166–6172. 21. Fogh, J., Fogh, J. M., and Orfeo, T. (1977) One hundred and twenty seven cultured tumour cell lines producing tumours in nude mice. J. Natl. Cancer Inst. 59, 221–226. 22. Yonamine, K., Hayashi, K., and Iida, T. (1999) Establishment and characterization of human ovarian clear cell adenocarcinoma cell line (SMOV-2) and its cytotoxicity by anticancer agents. Hum. Cell 12, 139–148.

Leukemia Cell Lines

141

12 Isolation and Culture of Leukemia Cell Lines Hans G. Drexler 1. Introduction 1.1. Importance of Leukemia Cell Lines The availability of continuous human leukemia cell lines as a rich resource of abundant, accessible, and manipulable living cells has contributed significantly to a better understanding of the pathophysiology of hematopoietic tumors (1). The first malignant hematopoietic cell lines, i.e., Burkitt’s lymphoma-derived lines, were established in 1963 (2). Since then, large numbers of cell lines have been described, although not all of them have been characterized in full detail (3). The major advantages and common characteristics of leukemia cell lines are listed in Table 1. The spectrum of malignant hematopoietic cell lines is not restricted to various types of leukemia but also includes the lymphomas and myelomas. The following refers also to lymphomaand myeloma-derived cell lines unless indicated otherwise. Truly malignant cell lines must be discerned from Epstein-Barr virus (EBV)-immortalized normal cells, and so-called B-lymphoblastoid cell lines (B-LCL). Some types of malignant cell lines are indeed EBV-positive and some EBV-positive normal cell lines may also carry genetic aberrations (1). Leukemia cell lines are now universally used and have become irreplacable tools in a multitude of research areas within the various scientific disciplines, e.g., immunology, cytogenetics, molecular biology, pharmacology, toxicology, and virology. Nevertheless, once cells are removed from their native environment and grown in cell culture, they are uncoupled from critical extracellular cues and may undergo phenotypic drift. During this process, transcriptional control mechanisms may change in ways that are difficult to predict. Therefore, in vitro-derived results must be interpreted with caution and confirmed in the context of the cell’s native environment.

1.2. Basic Principles of Leukemia Cell Line Establishment It is difficult to establish leukemia cell lines; the majority of attempts fail. The simple seeding of the malignant cells into suspension cultures is the most common approach. Although the success rate for establishing continuous cell lines is generFrom: Methods in Molecular Medicine, vol. 88: Cancer Cell Culture: Methods and Protocols Edited by: S. P. Langdon © Humana Press Inc., Totowa, NJ

141

142

Drexler

Table 1 Advantages and Characteristics of Leukemia Cell Lines • Unlimited supply of cell material. • Worldwide availability of identical cell material. • Indefinite storability in liquid nitrogen and recoverability. • • • • •

Monoclonal origin. Differentiation arrest at a discrete maturation stage Sustained proliferation in culture Stability of most features in long-term culture Specific genetic alterations

ally low, it depends on the subtype of leukemia, and varies according to the different reports in the literature. It has been suggested that certain types of leukemia cells derived from patients at relapse or from cases with poor prognostic features have an enhanced growth potential in vitro when compared to samples obtained at presentation or from patients with good prognostic parameters. Indeed, a review of the literature showed that on aggregate the success rate for B-cell precursor (BCP)-cell lines established from patients at diagnosis was 6%, whereas the success rate was 29% for relapse samples (4). Furthermore, there seems to be a higher success rate in cases that have certain primary chromosomal aberrations or gene mutations, e.g., T-cell lines harboring an (8;14)(q24;q11) translocation and cell lines carrying alterations of the P53, P15INK4B or P16INK4 genes (3,5). It has been reported that a hypoxic environment (for example, 5% O2) is more suitable to the culture and establishment of leukemic T- and BCP-cell lines than standard incubation in 5–10% CO2 in air (6). According to this method, cells are cultured in wells with a feeder layer consisting of complete media, human serum, and agar supplemented with insulin-like growth factor. For the BCP-cell lines, the monocyte toxin L-leucine methyl ester and insulin were applied. Although the success rate of cell line establishment was reported to be high, some of these cell lines have long doubling times (10–14 d) limiting their usefulness. Currently, no other group has confirmed the reproducibility of this method. The reasons for the frequent failure to establish cell lines remain unclear. The major causes appear to be culture deterioration with cessation of multiplication of the neoplastic cells and overgrowth by normal fibroblasts, macrophages, or lymphoblastoid cells. Although the lymphoblastoid cells may give rise to a continuous cell line (a nonmalignant EBV-positive B-LCL), human fibroblast and macrophage cultures are commonly not immortalized. Despite the fact that the proliferation of malignant hematopoietic cells in vivo seems to be independent of the normal regulatory mechanisms, these cells usually fail to proliferate autonomously in vitro even for short periods of time. In vivo, at least initially, these cells seem to require one or probably several hematopoietic growth factors for proliferation. The addition of regulatory proteins, e.g., recombinant hematopoietic growth factors or conditioned medium (CM) secreted by certain tumor cell lines (which often contains various factors), is a culturing technique

Leukemia Cell Lines

143

that appears to increase the frequency of success by overcoming the “crisis” period in which the neoplastic cells cease proliferating in vitro. These molecules enable the cells from the majority of patients to multiply for about 2–4 wk. Out of these short-term cultures containing surviving cells, continuous cell lines derived from the malignant cells can be established. For cell line immortalization, malignant cells must acquire a selective advantage in the cell culture environment. However, the mechanisms involved in the establishment of a leukemia cell line milieu are largely unknown. Taken together, the efficiency of cell line establishment is still rather low and the deliberate establishment of leukemia cell lines remains by and large an unpredictable process. Difficulties in establishing continuous cell lines may be the result of inappropriate selection of nutrients and growth factors for these cells. Therefore, a suitable microenvironment for hematopoietic cells, either malignant or normal, cannot yet be created in vitro. Hence, this is the area with the greatest challenge in the culture of leukemia cells. A systematic investigation to define the optimal cell numbers, culture conditions, growth factor combinations, other supplements, matrix characteristics, and a multitude of different parameters has not been reported. Further work is required to achieve significant improvements in the success rate of leukemia cell line immortalization. A breakthrough will likely benefit leukemia research in a myriad of experimental questions. In the following subsection, some of the most commonly used techniques for establishing leukemia cell lines are described.

2. Materials 2.1. Establishment and Culture of Cell Lines 1. Ficoll-Hypaque solution: density 1.077 g/L; store at 4°C in the dark. 2. Cell culture medium: all are commercially available; the most commonly used are RPMI 1640, Iscove’s Modified Dulbecco’s Medium, α-MEM, or McCoy’s 5A; store at 4°C in the dark; prepare aliquots of complete medium (maximally 100–200 mL) in a separate sterile glass bottle (to be used only for one specific cell line), which should be kept at room temperature in the culture laboratory in order to detect any microbiological contamination. 3. Fetal bovine serum (FBS): inactivate toxic components in the FBS prior to use in a 56 °C waterbath for 45 min; store aliquots of maximally 50 mL in plastic tubes at –20°C to 30°C. 4. Neubauer hematocytometer and trypan blue solution. 5. Recombinant growth factors: for example, erythropoietin (EPO), granulocyte-macrophage colony-stimulating factor (GM-CSF), granulocyte-CSF (G-CSF), interleukin-2 (IL-2), IL-3, IL-6, stem cell factor (SCF), or thrombopoietin (TPO). 6. Conditioned medium (CM) from tumor cell line cultures: for example, the human bladder carcinoma cell line 5637 is known to produce and secrete large quantities of various growth factors (7); aliquot the CM in 30- or 50-mL tubes and store at –20°C; test the 5637 CM in proliferation assays using an indicator cell line or determine the exact growth factor concentration with ELISA.

2.2. Freezing and Storage of Cell Lines 1. 2. 3. 4.

Dimethylsulfoxide (DMSO). Freezing ampules (plastic cryo vials). Controlled-rate freezer. Cryofreezing container (Nalgene Cryo 1°C Freezing Container).

144

Drexler

3. Methods

3.1. Establishment of Cell Lines 3.1.1. Acquisition of Cells (see Notes 1 and 2) 1. Collect heparin treated or otherwise anticoagulated specimens of peripheral blood, bone marrow, or other samples in sterile tubes (see Notes 3 and 4). Place lymph nodes and other solid tissues in sterile containers. 2. Specimens should be processed as soon as possible after receipt but may be stored overnight at room temperature. Peripheral blood and bone marrow should remain undiluted; solid tissues should be placed in culture medium. 3. Cryopreserved samples can also be used for attempts to establish cell lines. It appears to be of advantage to isolate the mononuclear cells prior to cryopreservation by FicollHypaque density gradient centrifugation (see Subheading 3.1.2.).

3.1.2. Isolation of Cells (see Note 5) 1. Cut solid tissue specimens (for example, lymph nodes) with scissors and force the particles through a fine metal mesh. Suspend the cells in 50–100 mL culture medium (possibly more, depending on the size of the tissue specimen). The most commonly used media are listed in Note 6. 2. Dilute the blood and bone marrow samples 1/2 with culture medium. Isolation of cells from a leukapheresis collection requires dilution of the sample with culture medium at 1/4. 3. Pipet the Ficoll-Hypaque density gradient solution (density 1.077 g/L) into a 15-mL or 30-mL conical centrifuge tube. Slowly layer the mixture of medium and sample over the Ficoll-Hypaque solution. Use equal volumes of sample mixture and Ficoll-Hypaque solution (see Note 7). 4. Centrifuge for 20–30 min at 450g at room temperature (with the centrifuge brakes turned off). A layer of mononuclear cells should be visible on top of the Ficoll-Hypaque phase as they have a lower density than the Ficoll-Hypaque solution. The anucleated erythrocytes and the polynucleated granulocytes are concentrated as a pellet below the Ficoll-Hypaque layer. 5. Using a sterile Pasteur pipet, transfer the interface layer containing the mononuclear cells to a centrifuge tube. 6. Wash the cells by adding culture medium plus 10% FBS (add about 5 times the volume of the mononuclear cell solution) and centrifuge for 5–10 min at 200g at room temperature (see Note 8). 7. Discard the supernatant, resuspend the cell pellet in culture medium plus 10% FBS and repeat the washing procedure. 8. Finally, resuspend the cells in 20 mL culture medium with 20% FBS. Count the cells and determine their viability (see Notes 9 and10).

3.1.3. Culture Conditions 1. Adjust the cell suspension of the original patient’s cells to a concentration of 2–5 × 106/ mL in culture medium (see Note 6) with 20% FBS plus additional 10% CM of cell line 5637 (see Note 11) or with an appropriate concentration of purified or recombinant growth factors (see Note 12). For additional additives such as antibiotics and others see Note 13. 2. Place 5–10 mL of cell suspension in the complete culture medium in an 80-cm2 plastic culture flask (see Note 14). If 24-well plates are used, add 1–2 mL cell suspension to each

Leukemia Cell Lines

3. 4.

5.

6.

7.

145

well. Add 100–200 µL of cell suspension into wells of a 96-well flat-bottomed microplates (see Note 15). Place the cells in a humidified incubator at 37°C and 5% CO2 in air (see Note 16). Expand the cells by exchanging half of the spent culture volume with culture medium plus 20% FBS plus 10% 5637 CM (or with appropriate concentrations of recombinant growth factors) once a week. After a few hours, some cells will become adherent (see Note 17). During the first weeks, the neoplastic cells may appear to proliferate actively. If the medium becomes acidic quickly (yellow in the case of RPMI 1640 medium), change half of the volume of medium at 2–3 d (day) intervals. If the number of the cells increases rapidly, readjust the cells every week to a concentration of at least 1 × 106/mL in fresh complete medium by dilution or subdivision into new flasks or wells of the plate. The neoplastic cells from the majority of patients undergo as many as four doublings in 2 wk, but after 2–3 wk most malignant cells cease proliferating. Following a lag time of 2–4 wk (crisis period), a small percentage of cells from the total population may still proliferate actively and may continue to grow and form a cell line. If the malignant cells continue to proliferate for more than 2 mo, there is a high possibility of generating a new cell line. Then, the task of characterizing the proliferating cells should begin as soon as possible (8). Prior to the characterization of the cells, freeze ampules of the proliferating cells containing a minimum of 3 × 106 cells/ampule in liquid nitrogen in order to avoid loss of the cells resulting from occasional contaminations or other accidents. Limiting dilution of the cells in 96-well-plates leads to the generation of monoclonal cell lines (see Note 18).

3.1.4. Documentation of Cells It is mandatory to freeze aliquots of the original cells (see Subheading 3.2.) and to store them in appropriate locations for later documentation, authentication, and comparisons. Once the cultured cells start to proliferate, ampules should be frozen at regular intervals during the initial period of the culture expansion. The morphology of the primary cell lines and also later of the cells from the resulting cell line should be documented on stained cytospin-slide preparation (see Note 19).

3.2. Freezing and Storage of Cell Lines 3.2.1. Freezing of Cells It is generally assumed that cell lines can be cryopreserved at –196°C in liquid nitrogen for more than 10 yr, if not indefinitely, without any significant changes in their biological features. The viable cell lines can be recovered at any time when needed. Prior to freezing in liquid nitrogen, the cells are suspended in the appropriate medium containing 20% FBS and 10% DMSO, which can lower the freezing point in order to protect the frozen cells from damage caused by ice crystals (see Note 20). It appears that no single suspending medium and procedure will be perfect for processing and cryogenic storage of all cell cultures. However, the procedures described here are suitable for most cell lines and are compatible with prolonged preservation of viability and other characteristics of the cell lines. 1. Harvest the cells of the cell lines by transfering the flask contents to 30 mL or 50 mL centrifuge tubes. The cells should be harvested in their logarithmic growth phase and when they are healthiest (see Note 21). Sufficient numbers of primary cells should be

146

2. 3. 4. 5. 6. 7.

Drexler frozen for later documentation and authentication (see Subheading 3.1.4.); immediately upon isolation, primary cells can be frozen after thorough washing steps (see Subheading 3.1.2.). Determine the total number of viable cells by counting the cell density as well as the viability of the cells using the trypan-blue dye exclusion method (see Note 10). Prepare a sufficient volume of freezing solution consisting of 70% culture medium, 20% FBS, and 10% DMSO. Cool on wet ice (see Note 22). Centrifuge the cell suspensions at 200g for 10 min; discard the supernatant. Adjust the cells to a concentration of 5–10 × 106/mL for cell lines and 10–50 × 106/mL for primary material using freshly prepared freezing solution (see Note 23). Distribute the cells into freezing ampules (plastic cryovials) with 1 mL/ampule, thus containing at least 5 × 106 cells (see Note 24). Using a computer-controlled rate freezer (cryofreezing system) a cooling rate of 1°C per min can be achieved, from room temperature down to –25°C. When the temperature reaches –25°C, the cooling rate is increased to 5–10°C per min. Upon reaching –100°C, the ampules can be transferred quickly to a liquid nitrogen container (see Note 25).

3.2.2. Cryopreservation in Liquid Nitrogen Permanent storage of ampules with primary cells or cells from cell lines should be in the liquid phase of the liquid nitrogen. However, long-term storage is also possible in the vapor phase of the liquid nitrogen tank. Long-term preservation of cell lines or primary cells at –80°C (beyond 1 wk) cannot be recommended as the cells will die under these conditions within months or even weeks.

3.3. Thawing, Expansion, and Maintenance of Cell Lines 3.3.1. Thawing of Cell Lines Commonly, cell lines are stored frozen in liquid nitrogen. Frozen cells must be thawed carefully in order to minimize cell loss. 1. The thawing solution consists of 80% culture medium and 20% FBS at room temperature or 37°C. 2. Remove the frozen ampule from liquid nitrogen and thaw the cells rapidly in a 37°C water bath by gently shaking the ampule in the water (see Note 26). 3. Wipe the ampule with a tissue prewetted with 70% ethanol before opening the vial. As soon as the cell suspension is thawed, transfer the cell suspension into a centrifuge tube. 4. Dilute the cell suspension slowly by adding 10–20 mL culture medium plus 20% FBS to the tube; shake the tube gently (see Note 27). 5. Centrifuge the cells at 200g for 10 min. Discard the supernatant. 6. Wash the cells again using another 10–20 mL culture medium plus 20% FBS. During centrifugation determine the total cell number and the percentage of viable cells in the improved Neubauer hematocytometer with trypan blue vital staining (see Note 10). 7. Finally, resuspend the washed cells in the desired culture medium with the recommended FBS concentration at the optimal cell density.

3.3.2. Expansion of Cell Lines After thawing, cells may be resuspended in complete medium at a general cell concentration of 0.2–1.0 × 106 cells/mL (see Note 28). Suspension cell lines may be cultured in flasks or 24-well plates (see Note 29).

Leukemia Cell Lines

147

1. Incubate the cells in a humidified 37°C incubator with 5% CO2 in air. Loosen the top of the flask slightly to allow for free gaseous exchange into and out of the flask. 2. Feed the cells by exchanging half of the culture volume with culture medium plus FBS at 2–3-d intervals (see Note 30). Remove half of the spent medium from the flask (gently) and then add the same volume of new complete medium into the flask. 3. If the cells proliferate actively, the culture medium will soon change color as a result of the pH change caused by cellular metabolism. In this case, it is necessary to change the medium more frequently. Should the cells double, subdivide the cells from the original flask into a second flask by diluting the suspension 1/2 with new medium. 4. When changing the medium, it is important to calculate the total cell number by determining the density as well as the viability of the cells using trypan-blue dye exclusion (see Note 10). 5. A careful documentation of all manipulations, macroscopic, and microscopic observations, intentional and accidental changes in the cellular conditions, and data on cell density, viability, and total cell number at different time points is mandatory.

3.3.3. Maintenance of Cell Lines The cell lines can be maintained as long as required (see Note 31). The cells can be harvested at any time for different uses. If the cells proliferate more quickly than needed, keep the cell growth at a slower pace by decreasing the FBS to a lower percentage in the medium, changing the medium at longer intervals, or discarding a certain amount of the cells (up to 75%) during the exchange of medium. There is, however, always the risk that a subclone with a growth advantage and somewhat different genotypic and/or phenotypic features than the parental cell line will overgrow the culture during long-term maintenance. For example, growth factor-dependent cell lines that during extended culture (1–2 mo) may become completely growth factor independent. Hence, establish a master and a working bank of any given cell line with a sufficient number of frozen samples so that cultures do not need to be kept for extended periods of time between experiments. A reasonable time frame for continuous uninterrupted cultivation of one cell line is in the range of 1–2 mo. After extended usage, culture flasks or plates will often contain a certain amount of unused ingredients of the medium and metabolized molecules and cell detritus. It is recommended that the plastic culture vessel be changed once every 1–2 mo.

3.4. Further Considerations 3.4.1. General Considerations Although in vivo malignant cells enjoy a selective growth advantage over normal hematopoietic cells, in vitro leukemia cells are difficult to grow and to maintain and attempts to establish cell lines meet more often with failure than with success. Although, currently there is no one single cell-culture system that assures consistent establishment of cell lines, several methods for immortalizing neoplastic cells have been developed. The technique of seeding cells in suspension cultures as described in this chapter is certainly the most used. Other methods recommended by several researchers have their advantages and might meet with success in some attempts. Growth of leukemia cells in soft agar or methylcellulose offers the advantage that the colonies formed are well fixed and can be easily removed from the supporting

148

Drexler

medium for further culture in other environments. Thus, a cell line might be established by passaging single colonies. Some lymphocytic leukemia cells can be immortalized using transforming viruses. EBV can promote growth of malignant B-cell lines from some patients with mature B-cell malignancies, but the EBV can also transform normal B-lymphocytes. Human T-cell leukemia virus (HTLV)-I allows the growth of malignant T-cells by inducing the IL-2 receptor. Considering the fact that EBV and HTLV can also transform normal cells, it is necessary to ascertain the malignant origin of the established cell lines by means of karyotype and molecular genetic analysis (8). The growth of malignant and normal hematopoietic cells in vitro and in vivo is the result of complex interactions between growth factors and their respective receptors. The addition of some growth factors into the culture medium can support the proliferation of the neoplastic cells and induce the formation of cell lines. A number of completely synthetic media, including several media designed specifically for unique types of leukemia cells, have been used by researchers for establishment and maintenance of cell lines in suspension cultures. It appears that no single medium is well suited for the growth of all types of leukemia cells. Should one medium fail to support cell growth, it might become necessary to try another kind of medium. FBS is the standard supplement in the suspension culture system of cell lines. It is commonly used in concentrations of 5–20%. Cell lines which do not require FBS in the culture medium have been described; however, they appear to be rather rare (3). Prior to usage, it is recommended that batches of serum be pretested for their ability to support vigorous cell growth and for viral (in particular bovine viral diarrhea virus), mycoplasmal and other bacterial contamination. If possible, a large supply of the FBS from a pretested batch that supports cell growth well and has no contamination should be purchased and stored at –20°C for future use. Alternatives are newborn-calf serum (usually at only 25% of the price of the expensive FBS) or serum-free media. However, not all cell lines will grow in newborn-calf serum as well as in FBS. Although serum-free media do not provide financial advantages, they do allow for certain experimental manipulations that are not possible with FBS. Because FBS is known to contain many unidentified ingredients at highly variable concentrations, one cannot control all the substances to which the cells are exposed.

3.4.2. Culture Environment A minimal amount of oxygen is essential for the growth of most types of cells in suspension cultures. The majority of cell lines grow well when they are incubated in a humidified 37°C incubator with 5% CO2 in air. However, the partial pressure of oxygen (pO2 ) in the normal body fluids is significantly less than that of air. Studies have shown that the pO2 in human bone marrow is 2–5%. This is considerably lower than the pO2 (15–20%) existing in the typical cell culture incubator maintained at 5% CO2 in air. It has been reported that growth of cultured cells could be improved by reducing the percentage of oxygen in the gaseous phase to between 1–10%. Growing leukemia cells under low oxygen conditions of 6% CO2, 5% O2, and 89% N2 may be a useful method for the establishment of cell lines (6), but is logistically more difficult resulting from the necessity for specialized incubators and a rather large consumption of N2.

Leukemia Cell Lines

149

3.4.3. Common Cell Culture Problems In the attempts to establish cell lines, the overgrowth of fibroblasts and normal EBV -positive lymphoblastoid cells is the most common problem. Should the nutrients in the medium become exhausted too quickly, the adherent cells should be removed by passaging the suspension cells into new flasks containing fresh medium. The overgrowth of EBV-positive B-lymphocytes can become visible 2 wk after seeding of the new culture. The EBV-positive B-cells look small and have irregular contours with some short villi. They proliferate preferentially in big-floating clusters or colonies (9). The colonies can be picked out with a Pasteur pipet and the EBV genome should be detected as soon as possible. It is always necessary to freeze aliquots of the fresh primary cells in liquid nitrogen before culture. If a cell line should subsequently become established, the original cells can be used as a control for characterization of the established cell line (8). In case of failure to immortalize a cell line, the frozen primary back-up cells can be used for further attempts. Maintenance of cell lines requires careful attention. Every cell line appears to have its optimal growth environment; parameters such as culture medium, cell density, nutrition supplements, and pH all play a major role. If cell growth becomes suboptimal or cells inexplicably die during culture, some of the following problems should be considered: suitability of the culture medium or the growth supplements for this particular cell line; proper functioning of the incubator at the appropriate temperature, humidity, and CO2 levels; and selection of the adequate cell density. Some cell lines clearly grow better in 24-well plates than in culture flasks. Contamination with mycoplasma, other bacteria, fungus, and viruses and crosscontamination with other “foreign” cells are the most common problems encountered in the maintenance of cell lines (10,11). Therefore, analyses at regular intervals must be undertaken to ensure a contamination-free environment for cell growth. In particular, mycoplasma contamination should be examined regularly, for example, using the polymerase chain reaction (see Chapter 31). All solutions and utensils coming into contact with cells must be sterilized prior to use; sterile techniques and good laboratory practices must be followed strictly (12). Although antibiotics can be added to the culture medium to prevent bacterial infection, they do not inhibit virus, fungus, or mycoplasma infection. Therefore, antibiotics such as penicillin and streptomycin are not necessary if care is taken regarding cell culture techniques (see also Note 13). Because contamination can cause the loss of valuable cell lines, it is important to cryopreserve a sufficient amount of cell material from each cell line. In order to prevent cellular contamination and misidentification, it is mandatory to use a separate bottle of medium for each cell line. Furthermore, cell culturists should not handle more than one cell line at the same time.

3.4.4. Time Considerations Generation of a cell line may require 2–6 mo. However, a cell culture should not be considered a continuous cell line until the cells have been passaged and expanded for at least 6 mo and ideally for 1 yr. Expansion of most cell lines after thawing takes 2–3

150

Drexler

Table 2 Most Important Requirements for a New Leukemia Cell Line • • • • • •

Immortality of cells Verification of neoplasticity Authentication of derivation Scientific significance Characterization of cells Availability to scientific community

wk. Depending on the parameters analyzed, 2–4 mo might be needed for a thorough characterization of the established cell line.

3.4.5. Availability of Cell Lines The most important requirements for a new cell line are listed in Table 2 (8). The cell line must be immortalized, i.e., it should be able to grow indefinitely. To differentiate between normal and malignant cell lines, the neoplasticity of the cell line should be verified, for example, by the analysis of numerical and structural chromosomal alterations (see Chapter 5). The derivation from the assumed patient must be proven by unequivocal authentication procedures, for example, forensic-type DNA fingerprinting (see Chapter 4). The scientific significance of a new cell line can be documented by its full characterization to uncover its most relevant features. Finally, it is important that new cell lines are not only published but are also made available to outside investigators. On one hand, scientific authenticity requires reproducibility. On the other hand, a cell line is certainly much more useful if it is transferred to colleagues inside and outside the originator’s own research field. The best option is the deposition of a cell line in a public cell line bank that is able to perform adequate quality and identity controls, further characterize the cells, store sufficiently large master and working stocks, and distribute the cells noncommercially to requesting scientists.

4. Notes 1. The most commonly used specimens are peripheral blood or bone marrow samples as these are relatively easily obtained from patients. Other liquid specimens (e.g., pleural effusion, ascites, cerebrospinal fluid) and solid tissue samples (e.g., lymph node, tonsil, spleen) are less often used but can be processed similarly to peripheral blood or bone marrow samples. Solid tissues require a prior step to dissociate mechanically. All solutions and utensils must be sterile. Working in a laminar flow cabinet (class 2 biological safety cabinet) under sterile conditions is recommended (for specifics on the biological safety, see Note 2). 2. During work with human blood or other tissues, including primary leukemia cells, established cell lines, and pathogenic and infectious agents, biosafety practices must be followed. Some cell lines may be virally infected. For example, EBV and human herpesvirus-8 (HHV-8) are assigned to biological safety risk category 2; human T-cell

Leukemia Cell Lines

3.

4.

5.

6.

7. 8.

9.

10.

151

leukemia virus (HTLV)-I/-II and human immunodeficiency virus (HIV) fall into risk category 3. Fresh primary material may contain hepatitis viruses B or C (both in risk category 3). A standard code of practice including safety and legal considerations has been published within the “UKCCCR (United Kingdom Co-Ordinating Committee on Cancer Research) Guidelines for the Use of Cell Lines in Cancer Research” (12). A literature review of 439 new cell lines produced the following statistical findings with regard to the specimen site from which primary cells had been obtained: peripheral blood, 48%; bone marrow, 24%; pleural effusion, 14%; ascites, 5%; bulk tumor, 3%; lymph node, 3%; cerebrospinal fluid, 1%; pericardial effusion, 1%; spleen, 1%; others (liver, meninges, tonsils), 97%) occur in cell cultures and is not suitable for the global identification of all types of mycoplasma species. Cell culture infections are commonly restricted to five or six mycoplasma species.

4. Notes 1. The primers can be designed using the degenerated code to incorporate two different nucleotides to form a mixture of two primers (Subheading 2.2.). When all oligonucleotides are mixed and prepared in aliquots for use in the PCR reaction, remember that the molarities are reduced by 50%. The primer solutions should be placed into small portions (25 µL aliquots) and stored frozen at –20°C to avoid multiple freeze-thawing cycles and to minimize contamination risks. 2. Any other DNA extraction and purification method that eliminates PCR inhibitors, should work as well. We tested normal phenol/chloroform extraction and ethanol precipitation,

Detection of Mycoplasma

325

Table 1 Restriction Fragment Patterns of the PCR Amplicons Digested With Various Restriction Enzymes

A. laidlawii M. arginini M. bovis M. fermentans M. hominis M. hyorhinis M. orale

AspI

HpaII

XbaI

HaeIII

SfuI

– – 303/213 – – 303/213 –

– – – 357/111/48 – – 288/230

– 266/253 – – 263/253 263/253 266/252

– – – 356/160 336/180 – –

436/81 – – – – – –

The numbers represent the sizes of the restriction fragments of the PCR product which was digested with the respective restriction enzyme; –, not digestable.

3.

4.

5.

6.

High Pure PCR Template Preparation Kit from Roche (Mannheim, Germany), and Invisorb Spin DNA MicroKit III from Invitek (Berlin, Germany). Following these methods, the amplification of the mycoplasma sequences was similar to the one after the Wizard preparation when the DNA was dissolved or eluted in 50 µL of water. We do not recommend using the crude samples directly in the PCR reaction after heating to 95°C as described in some publications. Even different dilutions of the unextracted samples should not be used, because endogenous substances might act as inhibitors of the Taq polymerase at very low concentrations and cause false-negative results. Even after DNA extraction, the PCR reaction can be inhibited by the unidentified substances. For this reason, internal control reactions need to be incorporated in the test series. The use of thermal cyclers other than the GeneAmp 9600 might require some modifications in the amplification parameters, for example, duration of the cycling steps, which are short in comparison to other applications. In addition, Mg2+, primer, or dNTP concentrations might need to be altered. The same is true if another Taq polymerase is used, either polymerases from different suppliers or different kinds of Taq polymerase; for example, we found that the parameters described were not transferable to HotStarTaq with a prolonged denaturation step (Qiagen). The limiting dilution of the internal control DNA can be used maximally for 2 or 3 mo when stored at 4°C. After this time, the amplification of the internal control DNA might fail even when no inhibitors are present in the reaction, because the DNA concentration might be reduced owing to degradation or attachment to the plastic tube. Applying the internal control DNA, the described PCR method is competitive only for the group of mycoplasma species that carries primer sequences identical to the one from which the internal control DNA was prepared. The other primer sequences are not used up in the PCR reaction as a result of mismatches. Usually one reaction per sample is sufficient to detect mycoplasma in “naturally” infected cell cultures. To avoid the possibility of performing a competitive reaction and of decreasing the sensitivity of the PCR reaction, for example, after antimycoplasma treatment or for the testing of cell culture reagents, two separate reactions can be performed. First, run a reaction without internal control DNA to make all reagents available for the amplification of the specific product. Second, an additional reaction including the internal control DNA to demonstrate the integrity of the PCR reaction (Fig. 1).

326

Uphoff and Drexler

7. During the analysis of heavily infected cultures, sometimes the internal control is not visible in the gel, owing to overwhelming amounts of target DNA in the sample compared to the trace amounts of the internal control DNA. In these cases, the correct run of the PCR reaction is demonstrated by the appearance of the band that is indicative of mycoplasma positivity.

References 1. Drexler H. G. and Uphoff CC. (2000) Contamination of cell cultures, mycoplasma. In: The Encyclopedia of Cell Technology (Spier E., Griffiths B., Scragg A. H., eds), Wiley, New York, pp.609–627. 2. Uphoff, C. C. and Drexler H. G. (2001) Prevention of mycoplasma contamination in leukemia-lymphoma cell lines. Human Cell 14, 244–247. 3. Hopert, A., Uphoff, C. C., Wirth, M., Hauser, H., and Drexler, H. G. (1993) Specificity and sensitivity of polymerase chain reaction (PCR) in comparison with other methods for the detection of mycoplasma contamination in cell lines. J. Immunol. Methods 164, 91–100. 4. Uphoff, C. C. and Drexler, H. G. (2002) Detection of mycoplasma in leukemia-lymphoma cell lines using polymerase chain reaction. Leukemia 16, 289–293.

Elimination of Mycoplasma

327

32 Elimination of Mycoplasma from Infected Cell Lines Using Antibiotics Cord C. Uphoff and Hans G. Drexler 1. Introduction 1.1. Mycoplasma Elimination: A Necessity Although many mycoplasma contaminations of cell cultures remain undetected over many years and thus seem to have no apparent influence on the growth or other characteristics of the cells, this is by far a misinterpretation of the symbiotic relationship of eukaryotic cells and mycoplasmas. Mycoplasmas indeed have a multitude of different effects on the various eukaryotic cells. However, the effects are not constantly seen in all infected cultures, but depend on the mycoplasma species, the type of cell culture, and the cell culture conditions. Nearly every parameter measured in cell culture or experimental investigations may be affected by mycoplasmas (1). The spectrum of effects range from more or less marked growth inhibition, altered levels of protein, RNA, and DNA synthesis, induction of chromosomal aberrations, alteration of the membrane composition, including surface antigen and receptor expression combined with alterations of signal transduction. The specificity of the infections is indicated by the adverse effects of induction or inhibition of activation, proliferation, and differentiation of hematopoietic cells, the induction or suppression of cytokine and growth factor expression, enhanced immunoglobulin secretion by B-cells, the increase or decrease of virus propagation, and a variety of other parameters. Many of the effects mentioned above are attributable to the deprivation of essential culture medium components and the degradation of specific nucleic acids and their precursors, amino acids, lipids, and so forth. Moreover, the metabolites can be harmful for the eukaryotic cells because of the production of acids from the fermentation (by fermentative mycoplasmas) or ammonia (by the arginine-hydrolyzing mycoplasmas) that is highly toxic to the eukaryotic cells (2). Thus, mycoplasma contaminations cannot be regarded as harmless but may have detrimental consequences. Moreover, contaminated cell cultures represent a source of infection for other cell cultures. Consequently, cell cultures harboring mycoplasmas From: Methods in Molecular Medicine, vol. 88: Cancer Cell Culture: Methods and Protocols Edited by: S. P. Langdon © Humana Press Inc., Totowa, NJ

327

328

Uphoff and Drexler

should either be autoclaved and discarded immediately or taken into quarantine and cured from the infection (3).

1.2. Antibiotic Treatment of Mycoplasma-Infected Cell Cultures Taking into account that 10–30% of all cell lines maintained in laboratories are infected with mycoplasmas, and many of these cannot be replaced by uncontaminated cell cultures, there is a clear need for effective and feasible methods for the elimination of mycoplasma. A number of methods have been described to cure cell lines from the contaminants. These include physical, chemical, immunological, and chemotherapeutic procedures (2). Many of the elimination methods are of limited value for use in cell culture, because they are not always effective, and the mycoplasmas reappear after a while, are too laborious or require special equipment or facilities, or show detrimental effects on the eukaryotic cells (4). The application of chemotherapeutic reagents, such as antibiotics, currently seems to be the method of choice, because it is practicable for almost any cell culture laboratory. Concerning morphology, biochemistry, and genetics, mycoplasmas exhibit special features which make them unique among the eubacteria. The antibiotic agents commonly used in cell culture, mainly penicillin and streptomycin, have no effect on the viability of mycoplasmas, although sometimes may suppress their growth (see Note 1). Thus specific antimicrobial agents have to be applied. Over recent years, three unique groups of antibiotics have been shown to be highly effective against mycoplasmas, both in human/veterinary medicine and in cell culture: tetracyclines, macrolides, and quinolones. Tetracyclines and macrolides inhibit protein synthesis by binding to the 30S and 50S ribosomal subunits, respectively. Quinolones inhibit the bacterial DNA gyrase, essential for the replication of the DNA. It is important to have a number of antibiotics available which act differently against mycoplasmas, because the development of resistant clones and the possible crossreactivity with weakened eukaryotic cells can be overcome by the application of an antibiotic from an unrelated group of reagents. It should be mentioned that these antibiotics are not intended to be used as general supplement in cell culture to avoid mycoplasma infections, but only for the short timeperiod during antimycoplasma treatment. Here, we describe the use of several antibiotics for the treatment of mycoplasmacontaminated cells, the rescue of heavily infected cultures, salvage treatment of resistant cultures, and some pitfalls during and after the treatment.

2. Materials As the antibiotics are light sensitive, protect the stock and working solutions from the light as well as the cell cultures containing the antibiotics as far as possible. 1. BM-Cyclin (Roche, Mannheim, Germany, cat. no. 799050) contains the macrolide tiamulin (BM-Cyclin 1) and the tetracycline minocycline (BM-Cyclin 2), both in lyophilized states. Dissolve the antibiotics in 10 mL sterile dH2O, aliquot in 1-mL fractions and store at –20 °C. Repeated freezing and thawing of the solutions is not critical for the activity of the antibiotics. The dissolved solutions can be used as 250-fold dilutions in cell culture (at 10 µg/mL and 5 µg/mL, respectively).


329

2. Ciprobay 100 (Bayer, Leverkusen, Germany) contains 2 mg/mL ciprofloxacin and can be used 1/200 in cell culture (at 10 µg/mL). One-mL aliquots should be taken in a sterile manner from the bottle and stored at 4°C. 3. Baytril (Bayer) contains 100 mg/mL of enrofloxacin and is diluted 1/100 with RPMI 1640 medium immediately prior to the treatment. The dilution should be prepared freshly for every antimycoplasma treatment. This solution is used as 1/40 final dilution in cell culture (at 25 µg/mL). 4. Zagam (Rhône-Poulenc, France) contains the antibiotic sparfloxacin as powder, and the stock solution is prepared by dissolving the antibiotic in freshly prepared 0.1 N NaOH to a concentration of 20 mg/mL. This solution can be stored at 4 °C. Before treatment, the stock solution is diluted 1/1 with RPMI 1640 medium and used in cell culture at a 1/1000 final dilution (at 10 µg/mL). 5. MRA (Mycoplasma Removal Agent, ICN, Eschwege, Germany) contains 50 µg/mL of a 4-oxo-quinolone-3-carboxylic acid derivative and is used in the treatment of cell cultures in 1/100 dilutions (at 0.5 µg/mL). 6. Phosphate-buffered saline (PBS): 140 mM NaCl, 27 mM KCl, 7.2 mM Na2HPO4 · 12 H2O, 14.7 mM KH2PO4, pH 7.2; autoclave.

3. Methods 3.1. General Considerations 1. Prior to the treatment, aliquots of the contaminated cell line should be stored frozen, but isolated from non-infected cultures, either at –80 °C for short time (maximally 2–3 mo) or preferably in liquid nitrogen in separate tanks (see Note 2). The ampoules have to be marked properly as mycoplasma-positive to prevent a mix-up of ampoules containing cured or infected cells. After successful cure, these mycoplasma-positive ampoules will be removed and the cells destroyed by autoclaving. 2. The mycoplasma infection often impedes growth and negatively affects the general appearance of the eukaryotic cells; in other words the cells are objectively and subjectively not in the best of health. These impaired conditions are further aggravated by the exposure of the cells to the antibiotics, as the agents appear to affect those cells more than cells in good condition. Sometimes the desired anti-mycoplasma effect is cancelled by the negative effect of the antibiotics on the eukaryotic cells. Therefore, a few general rules should be followed to improve the culture conditions and to reduce the stress of infection and treatment on the eukaryotic cells: a. Increase the FBS concentration to 20%, even if the cells grow well at lower concentration. b. Culture the cells at a medium cell density and keep this density almost constant over the period of treatment and a few weeks posttreatment. c. Observe the culture daily under the inverted microscope to recognize quickly any alteration in general appearance, growth, morphology, decrease in cell viability, detachment of cells, formation of granules, vacuoles, and so forth. d. In the case of deterioration of the cell culture, interrupt the treatment for a few days and let the cells recover (but this should only be the last resort). e. Detach frequently even slowly growing adherent cells in order to facilitate the exposure of all mycoplasmas to the antibiotic; the contaminants should not have the opportunity to survive in sanctuaries such as cell membrane pockets. It is similarly helpful to break up clumps of suspension cells by vigorous pipeting or using other reagents, for example, trypsin.

330

Uphoff and Drexler

f. Store the antibiotics at the recommended concentrations, temperatures, and usually in the dark, and do not use them after the expiration date. g. Prepare the working solutions freshly for every treatment and add the solution directly to the cell culture and not to the stored medium. h. Keep the concentration of the antibiotic constant during the treatment period; degradation of the antibiotic can be avoided by frequent complete exchange of the medium. 3. Generally, two different methods are applied for the treatment of cell cultures: the use of quinolones, which is basically the same procedure for each antibiotic of that group, and the use of BM-Cyclin, which is a combination therapy applying the two antibiotics minocycline (tetracycline) and tiamulin (macrolide) in alternating cycles (5). The latter method is more time consuming, but also more effective. We recommend applying both types of treatment in parallel.

A schematic overview of the procedure is given in Fig. 1; an exemplary representation of the treatment with BM-Cyclin is shown in Fig. 2.

3.2. Antibiotic Treatment 3.2.1. Treatment With BM-Cyclin 1. Bring the cells into solution (detach adherent cells, break up clumps by pipeting or using other methods) (see Note 3); determine the cell density and viability by trypan blue exclusion staining. Seed out the cells at a medium density (see Note 4) in a 25-cm2 flask or one well of a 6- or 24-well-culture plate with the appropriate fresh and rich culture medium (10 mL for the flask, and 2 mL and 1 mL for the wells, respectively). Add 4 µL of a 2.5-mg/mL solution BM-Cyclin 1 (tiamulin) per milliliter medium. Incubate the cell culture for 2 days (d). 2. Remove all cell culture medium in flasks or wells containing adherent cells or after centrifugation of suspension cells. If applicable, dilute the cell cultures to the medium cell density. Add fresh medium and the same concentration of BM-Cyclin 1 as used in step 1. Incubate for another day. This procedure will keep the concentration of the antibiotic approximately constant over the 3-d cycle of applying tiamulin. 3. Remove the medium and wash the cells once with PBS to remove the residual antibiotic agent completely from the cells and loosely attached mycoplasmas (see Note 5). Seed out the cells at the appropriate density and add 4 µL of the 1.25 mg/mL solution BM-Cyclin 2 per milliliter medium. Incubate the culture for 2 d. 4. Remove the culture medium and substitute with fresh medium. Add the same concentration of BM-Cyclin 2 as used in step 3. Incubate the cell culture for 2 d to complete the 4-d cycle of minocycline-treatment. 5. Repeat steps 1–4 twice (three cycles of BM-Cyclin 1 and BM-Cyclin 2 altogether). Proceed with protocol in Subheading 3.3.

3.2.2. Treatment With Quinolones 1. Bring the cells into solution (detach adherent cells, break up clumps by pipeting or using other methods) (see Note 3); determine the cell density and viability by trypan blue exclusion staining. Seed out the cells at a medium density (see Note 4) in a 25-cm2 flask or one well of a 6- or 24-well-culture plate with the appropriate fresh and rich culture medium (10 mL for the flask, and 2 mL and 1 mL for the wells, respectively). Add one of the following antibiotics to the cell culture and incubate for 2 d: a. 25 µL of a 1 mg/mL solution enrofloxacin (Baytril) per mL medium. b. 10 µL of a 50 µg/mL solution MRA per mL medium.


331

Fig. 1. Recommended scheme for mycoplasma eradication. An arsenal of different antibiotics can be used to treat mycoplasma-contaminated cell lines with a high rate of expected success. We recommend: (1) cryopreservation of original mycoplasma-positive cells as backups; and (2) splitting of the growing cells into different aliquots. These aliquots should be exposed singly to the various antibiotics. It is important to point out that quinolone-resistant cultures could still be cleansed by BM-Cyclin. Posttreatment mycoplasma analysis and routine monitoring with a sensitive and reliable method (for example by PCR) are of utmost importance.

332

Uphoff and Drexler

Fig. 2. Treatment protocol for BM-Cyclin. Antibiotics are given on the days indicated by arrows. Cells are washed (indicated by W) with PBS prior to the cyclical change of antibiotics to avoid formation of resistant mycoplasmas that occur when concentrations of the antibiotics are low. At the end of the decontamination period, cells are washed with PBS and suspended in antibiotic-free medium. After a minimum of 2 wk posttreatment, the mycoplasma status of the cells is examined with sensitive and robust methods (for example by PCR).

c. 1 µL of a 10 mg/mL solution sparfloxacin (Zagam) per mL medium. d. 5 µL of a 2 mg/mL solution ciprofloxacin (Ciprobay) per mL medium. 2. Remove all cell culture medium in flasks or wells containing adherent cells or after centrifugation of suspension cells. If applicable, dilute the cell cultures to the medium cell density. Add fresh medium and the same concentration of the respective antibiotic as used in step 1. Incubate for another 2 d. 3. Applying enrofloxacin, MRA, or sparfloxacin, repeat step 2 another two times (altogether 8-d treatment). Employing ciprofloxacin, repeat step 2 five times (altogether 14-d treatment). Proceed with with protocol in Subheading 3.3.

3.3. Culture and Testing Post-Treatment 1. When the treatment is completed, remove the supernatant, wash the cells with PBS, and seed out the cells as described in Subheading 3.2. Keep the cells at the higher cell density and use the enriched medium, but do not add any antibiotic compounds, also no penicillin/streptomycin or similar. Thus, the cells should be cultured for at least another 2 wk. Even if initially the cells appear to be in good health after the treatment, we found that the cells might go into a crisis after the treatment, especially following treatment with BM-Cyclin. Thus, the cell status should be frequently examined under the inverted microscope. 2. After passaging, test the cultures for mycoplasma contamination. If the cells are clean, freeze and store aliquots in liquid nitrogen. The cells in active culture have to be retested periodically to ensure continued freedom from mycoplasma contamination. 3. After complete decontamination, expand the cells and freeze master stocks of the mycoplasma-free cell line and store them in liquid nitrogen to provide a continuous supply of clean cells. Discard the ampoules with mycoplasma-infected cells.


333

3.4. Further Considerations In our experience, it is advantageous to employ both types of treatments (BM-Cyclin and one of the quinolones) in parallel, as usually at least one of the treatments is successful. In the rare event of resistance, cells of the untreated frozen back-up aliquots can be thawed and treated again with another antibiotic. As MRA, ciprofloxacin, enrofloxacin, and sparfloxacin all belong to the group of quinolones, it is likely that the use of an alternative compound from the same group will produce the same end result (cure, resistance, or culture death). In the case of loss of the culture during or after the treatment, aliquots can be treated with quinolones, as these are usually better tolerated by the eukaryotic cells. We recommend using MRA which shows almost no effect on the growth parameters during the treatment of 1 wk. The use of 5 µg/mL sparfloxacin might be an alternative to the treatment procedure described, as this concentration was also shown to be effective against mycoplasma in most cases. One of the latter two treatments is also recommended when the cells are already in a very bad condition prior to treatment and the number of available cells would suffice only for one single treatment. Sometimes, the cells recover rapidly after starting the treatment because of the immediate reduction of the mycoplasmas and the ensuing release of the cells from the mycoplasmal stranglehold. If the cytotoxic effects of the antibiotics appear to be too strong, so that one would risk the loss of the cell culture (occasionally observed when BM-Cyclin is employed), the procedure might be interrupted for a short time, i.e., one or two days, to allow the cells sufficient time for recovery. This should be done when the first symptoms of serious cell culture deterioration begin to appear. If the cells are already beyond a certain degree of damage, it is difficult to reverse the progression of apoptosis.

4. Notes 1. The general use of antibiotics in cell culture is not recommended except under special circumstances and then only for short durations. Use of antibiotics may lead to lapses in aseptic technique, to selection of drug-resistant organisms, and to delayed detection of low-level infection with either mycoplasmas or other bacteria. 2. The storage in liquid nitrogen might be one of the potential contamination sources of cell cultures with mycoplasmas. Mycoplasmas were shown to survive in liquid nitrogen even without cryopreservation. Once introduced into the nitrogen, mycoplasmas may persist in the tank for an indefinite time, not proliferating, but being able to contaminate cell cultures stored in the liquid phase of the nitrogen. The infection might happen, when the ampoules are inserted into the tank, cooled down to –196°C and the unfilled part of the ampoule is filled with liquid nitrogen because the pressure is low. Thus, we strongly recommend storing the ampoules in the gaseous phase of the nitrogen to prevent contamination. Additionally, contaminated cell cultures and those of unknown status should be stored separately from noninfected cells, preferably in separate tanks. If this is not possible, be sure to store the ampoules at different locations of one tank and in the gaseous phase (high positions in the tank). Do not fill with liquid nitrogen above a certain level. 3. It is important to break up the clumps and clusters and to detach the cells from the surface of the culture vessels. Although the antibiotics are in solution and should be accessible to all parts of the cells, the membranes might be barriers which cannot be passed by the

334

Uphoff and Drexler

antibiotics. Mycoplasmas trapped within clumps of eukaryotic cells or even in cavities formed by the cell membrane of a single cell might be protected from the antibiotic. This is also the reason for the advice to keep the concentration of the antibiotic constantly high by frequently exchanging the medium. 4. Depending on the growth rate of the cell line, which might be severely altered by the antibiotic, the cell density should be diluted, kept constant, or even concentrated. If no data are available at all for a given cell culture, or if the cell culture is in a very bad condition, the cell density, growth rate, and viability should be recorded frequently to improve the condition of the culture. 5. The concentration of the antibiotics should be kept at a constant level throughout the treatment period. Low antibiotic concentrations attributable to degradation in culture or dilution by passaging the cell culture may lead to the development of resistant mycoplasma strains. Thus, exchange of the complete medium and washing the cells with PBS is recommended.

References 1. Barile, M. F. and Rottem, S. (1993) Mycoplasmas in cell culture. In: Rapid Diagnosis of Mycoplasmas (Kahane, I. and Adoni, A., eds.), Plenum Press, New York, pp. 155–193. 2. Drexler, H. G. and Uphoff, C. C. (2000) Contamination of cell cultures, mycoplasma. In: The Encyclopedia of Cell Technology (Spier, E., Griffiths, B., Scragg, A. H., eds.), Wiley, New York, pp. 609–627. 3. Uphoff, C. C. and Drexler, H. G. (2001) Prevention of mycoplasma contamination in leukemia-lymphoma cell lines. Human Cell 14, 244–247. 4. Uphoff, C. C., Meyer, C., and Drexler, H. G. (2002) Elimination of mycoplasma from leukemia-lymphoma cell lines using antibiotics. Leukemia 16, 284–288. 5. Schmidt, J. and Erfle, V. (1984) Elimination of mycoplasmas from cell cultures and establishment of mycoplasma-free cell lines. Exp. Cell Res. 152, 565–570.

Cell Culture Media

APPENDIX 1 Formulations of Commonly Used Cell Culture Media

335

336

Formulations of Commonly Used Cell Culture Media

336 Appendix 1

Cell Culture Media

Formulations of Commonly Used Cell Culture Media (Cont.)

337 337

338


338 Appendix 1

Cell Culture Media


339 339

Lines from ATCC and DSMZ

APPENDIX 2 Human Cancer Cell Lines Available from the ATCC and DSMZ Cell Banks (Combined List)

341

342

Appendix 2 Human Cancer Cell Lines Available from the ATCC and DSMZ

Lines from ATCC and DSMZ Human Cancer Cell Lines Available from the ATCC and DSMZ (Cont.)

343

344 Human Cancer Cell Lines Available from the ATCC and DSMZ (Cont.)

Appendix 2


345

346

Appendix 2 Human Cancer Cell Lines Available from the ATCC and DSMZ (Cont.)


347

Cancer Cell Culture: Methods and Protocols (Methods in Molecular Medicine)

Dendritic Cell Protocols (Methods in Molecular Medicine)

Dendritic Cell Protocols (Methods in Molecular Medicine)