National Driller October 2011

| Vol. 32 No. 10 October 2011

The Industry’s #1 Source for Buying/Selling Equipment

www.nationaldriller.com

2 | NATIONALDRILLER October 2011

Card No. 18

Card No. 9

www.NationalDriller.com | 3

[email protected]

GREG ETTLING, EDITOR

For Openers

News and Notes at Press Time A Wonderful Restoration

Maximize Your ND Experience

From Mrs. R.J. Neely, Riviera, Texas: My husband, R.J. Neely, restored this drilling rig (a 1917 Republic 3-ton truck with turn-of-the-century cable-tooling). Our son, Jim Bob Neely, hauled it to the Lubbock, Texas, state convention for display. We had the solid-rubber tires made in Hope, Ark. We have another 1917 four-wheel-drive drilling rig ready to be restored. The solidrubber tires were made in Kansas. They are difficult to find and quite expensive. My husband passed away on February 8th 2011. I doubt that rig gets restored. Not in Riviera, Texas, anyway.

Clean Water for Marines Up until recently, Marines operating from peaks thousands of feet high in Afghanistan had to carry their drinking water over a two-mile round trip on a daily basis. Engineers with 7th Engineer Support Battalion (ESB), 2nd Marine Logistics Group (MLG) came up with a

the unit had to order were a 230-volt, 20-HP, 6-foot fully submersible Franklin Electric pump, a 15-HP Franklin Electric transfer pump, and hundreds of hose connections ranging in size and shape. Explains Robertson: “The transfer pump is electric, and runs off a generator. We

We can’t fit everything we’d like iinto W ’ fi hi ’d lik the print editions of National Driller, and we operate under strict deadlines with the printer – two immensely frustrating conditions for editors keen on delivering to you the timeliest information that you can use to maximize the profitability of your business. As great as the print edition of National Driller is, it can’t do it all. But National Driller isn’t confined to the publication you receive

i the in h mail il once a month. h O Our iindustryd leading website is updated regularly with the latest news, special web-only features, photos from trade shows and more (we just added a “Video Spotlight” section – check it out, maybe your firm has a video we could post there). We also have two free electronic newsletters, and we’re on Facebook and Twitter. You can find all of this and more at www.nationaldriller.com.

A Major Purchase, Indeed

Cpl. Justin Cannady, the site commander with Echo Battery, 2nd Battalion, 12th Marine Regiment, in Kajaki, Afghanistan, guides more than 1,000 feet of 95-mm cable down a mountainside during a well and water purification project. convenient, cost-efficient solution. The 15-day project implemented a proven strategy using gravity-fed hoses, transfer pumps and a lightweight water purification system. The project required 600 work-hours, the placing of more than 1,000 feet of cable weighing approximately 6,000 pounds, and covered 3,000 feet of rugged terrain in Kajaki, Afghanistan. “The generator should not need to be replaced unless it breaks down, or the Marines leave,” states Gunnery Sgt. Wyatt Robertson, the utilities chief with Support Company, 7th ESB, 2nd MLG. “The only upkeep costs for us will be generator and lightweight water purification system preventive and corrective maintenance and fuel.” Included in the commercial equipment 4 | NATIONALDRILLER October 2011

also set up electrical equipment such as switchers and breakers. We have a whole electrical room, and everything can run from Observation Post (OP) Athens. The transfer pump pumps the water to about 3,000 feet across the peaks.” The well pumps water from the lake that is created by the Kajaki Dam. A float device was crafted using four 5-gallon drums, some piping and the 20-HP pump, preventing the pump from resting on the bottom of the lake, therefore allowing it to pump water more efficiently. The water then is pumped through to OP Athens, where it is purified with the lightweight purification system at a rate of 120 pounds per hours. Afterward, it is pumped to the highest peak 3,000 feet away, called Normandy, and then gravity-fed up to a more distant peak.

Major Drilling Group International Inc., headquartered in Moncton, New Brunswick, just recently announced that it has entered into an agreement to acquire all of the issued and outstanding shares of Bradley Group Ltd., a family-owned drilling company based in Rouyn Noranda, Quebec, for an aggregate purchase price of $80 million. “The acquisition of Bradley Group is a unique opportunity to further Major Drilling’s corporate

strategy of focusing on specialized drilling, expanding our geographic footprint in areas of high growth, and of maintaining a balance in our mix of drilling services. The operations of both companies are very complementary in terms of geography, personnel and strategies,” says Francis McGuire, president and CEO of Major Drilling. The move adds 124 rigs and 841 employees to Major’s base of 571 rigs and 4,362 employees. ND

MARCELLUS AIR POWER

AV A NO IL W A B LE

!

1270 @ 500 PSI / 1500 @ 350 PSI

Compressor & Booster Packages Available Featuring Products From

Gardner Denver

Ariel

Mist Pump

800.221.0586 or 814.443.2670 184 Alisa Street, Somerset, PA 15501 Email: [email protected]

WWW.KEYSTONEDRILL.COM Card No. 52

www.NationalDriller.com | 5

INSIDE October 2011

Vol. 32 No. 10

ADVERTISERS

www.NationalDriller.com

PRODUCT NUMBER

FEATURES

10

14

10 Why Do We Have Safety Meetings? Prudent advice from your friends at Drill-Safe.com.

14 Keeping Rail Project on Track Braun Intertec’s environmental drilling project.

22 Water for Life – Bringing Quality Water to Haiti A most powerful symbol of life.

36 The 2011 JUBILEE Show makes a move forward.

44 Ten Ways to Cut Fuel Costs Getting your consumption under control.

58 Ground Water Monitoring Well Development

22

Several factors to consider.

Geothermal Project Profiles 48 50 52 54

Vermeer Corp. Schramm Inc. Mills Machine Co. Laibe Corp./Versa-Drill

About the cover:

36

A crew from leading geotechnical contractor Hayward Baker installs epoxy-coated hollow-bar soil nails in Park City, Utah. The wall was failing and ready to roll down into some very expensive homes. The only access was from above the road, so the crew used an excavator-mounted rig from TEI Rock Drills to reach all the soil nails. Design by Mike Richison.

34 39 100 45 59 33 62 11 101 8 14 51 12 102 22 3 103 104 54 31 107 13 20 105 41 106 42 53 24 52 30 19 55 6 23 113 48 82 10 26 38 9 32 17 77 61 2 49 5 108 4 16 63 109 56 110 18 7 21 28 75 27 67 72 15 111 35 112 1

PAGE NUMBER

A.Y. McDonald Mfg. Co. .......................................... 23 Acker Drill Company Inc. ...................................... 39 Acker Drill Company Inc. (PLL) ........................... 56 AIR Equipment Corporation ................................. 19 AMS Inc..................................................................... 12 Armstrong Machine Company ............................ 66 ASTEC Underground.............................................. 27 Baker Water Systems............................................ 42 Baker Water Systems (PLL)................................. 56 Baroid / Halliburton Company ................................9 Bit Brokers International....................................... 26 Casagrande SPA ..................................................... 33 Center Rock Inc. ...................................................... 43 Center Rock Inc. (PLL) ........................................... 56 Central Mine Equipment Company..................... 41 Copeland Supply Company .................................. 63 Cotey Chemical Corporation (PLL)...................... 57 Doosan Portable Power (PLL) ............................. 56 Enid Drill Systems .................................................. 60 Fraste SpA...................................................................7 Geoprobe Systems (PLL)...................................... 57 Geoprobe Systems................................................. 60 George E. Failing Co. .............................................. 34 George E. Failing Co. .............................................. 35 George E. Failing Co. (PLL)................................... 57 Heron Instruments................................................. 28 Heron Instruments (PLL)...................................... 56 Higgins Rig Co. ....................................................... 65 Jet-Lube ................................................................... 30 Keller America ....................................................... 63 Keystone Drill Services Inc. ....................................5 King Oil Tools Inc..................................................... 34 KS Bit Inc. ................................................................. 40 Laibe Corp./Versa-Drill ......................................... 55 Little Beaver/Lone Star Drills .............................. 47 Merrill Mfg................................................................ 59 Merrill Mfg. (PLL).................................................... 56 Mid America Drilling Equipment Inc. ................. 83 Mills Bit Service Inc. .............................................. 32 Mills Machine Co..................................................... 53 Mincon Inc. ............................................................... 21 Mobile Drill ............................................................... 84 MudPuppy International...........................................3 N & N Drilling Supply Mfr...................................... 58 Palmer Bit Co........................................................... 11 PDSCo Inc................................................................. 62 Pulstar....................................................................... 24 Rauch Manufacturing ............................................ 20 Ring Power Corp..................................................... 29 Schramm Inc. .......................................................... 51 Schramm Inc. (PLL)............................................... 56 Semco Inc................................................................. 37 Shallow Draft Elevating Boats, Inc. ..................... 45 SIMCO Drilling Equipment Inc. ........................... 65 SJE-Rhombus (PLL).............................................. 56 Solinst Canada Ltd. ................................................ 61 Sonic Drill Corporation (PLL) ............................... 57 Star Iron Works Inc. ..................................................2 Stockdale Mine Supply Inc. ............................16, 17 Stratex Hyduke Machining Solutions ................. 65 TEI Rock Drills ......................................................... 31 Tianjin Lilin Petroleum Machinery Co., Ltd. ...... 46 Tube Technologies Inc............................................ 61 Venture Drilling Supply ......................................... 45 Vermeer Corp. ......................................................... 49 Washington Rotating Control Heads .................. 15 Water-Right Inc. (PLL) ........................................... 56 Wyo-Ben Inc. ........................................................... 25 Wyo-Ben Inc. (PLL) ................................................ 57 Yichang Wuhan Rock Drilling............................... 13

Request FREE product information online from industry leaders at

www.NationalDriller.com/ freeproductinfo

FRASTE Spa Via Molino di Sopra, 71 - 37054 Nogara (VR) - Italy Tel. +39 0442 510233 - Fax +39 0442 88426 [email protected] - www.fraste.com

Card No. 31

Dealer for North America: Marl Technologies 5603 - 54th Street - Edmonton Alberta, Canada T6B3G8 Tel. +1 780 435 8500 - Fax +1 780 434 7242

www.NationalDriller.com | 7

INSIDE October 2011

Vol. 32 No. 10

®

P.O. Box 6167, Marianna, FL 32447 4636 Hwy. 90 E, Suite P. • Marianna, FL 32446 Ph: 850-482-6310, 800-874-4245 • Fax: 850-482-4818, 800-845-7119

www.NationalDriller.com

Web Site: www.NationalDriller.com

COLUMNS

PUBLISHING & EDITORIAL STAFF PUBLISHER: Dan Murfey – [email protected] Ph: 248-244-1277 Fax: 248-244-3913 EDITOR: Greg Ettling – [email protected] Ph: 847-387-9391 Fax: 248-502-1005

4 For Openers

MANAGING EDITOR: Lisa Schroeder – [email protected] Ph: 630-962-0097 Fax: 248-786-1446

by Greg Ettling

PRODUCTION DIRECTOR: Carrie L. Cypert – [email protected] Ph: 248-786-1688 Fax: 248-502-1020

News and Notes at Press Time

ART DIRECTOR: Mary McAllister – [email protected] Ph: 850-482-6310 Fax: 248-502-2043

12 The World According to Wayne

DESIGN CONSULTANT: Mike Richison

by Wayne Nash, MGWC

How to Beat the Recession

4

CONTRIBUTING EDITORS: Tim Augustine, John H. Berry, Howard “Porky” Cutter, George Dugan, Edward Elliott, Brian McLarty, Wayne Nash, Bob Oliver, Jim Olsztynski, Robert Pelikan, Jim Piasecki, John Schmitt, Kim Stevens, Andrew Stone, Todd Tannehill ADVERTISING SALES NATIONAL SALES MANAGER: Dean Laramore - [email protected] Ph: 850-482-6310 Fax: 248-502-2047

20 Tech Topics by Bob Pelikan

EUROPEAN SALES MANAGER: Fabio Potesto - [email protected] Ph: (+39) 010.5704948 Fax: (+39) 010.5530088

Using Multiple Pressure Tanks for Larger Systems

CLASSIFIED SALES Mae Williams – [email protected] Ph: 850-482-6310 Fax: 850-482-4864

28 Drilling Fluids by George Dugan

Cheryl Seaton – [email protected] Ph: 850-482-6310 Fax: 850-482-4864

HDD Geothermal Loop Installation

SALES ASSISTANT Caroline Mims – [email protected] Ph: 850-482-6310 Fax: 248-502-2022 AUDIENCE DEVELOPMENT GROUP AUDIENCE DEVELOPMENT MANAGER: Teresa Owens MULTIMEDIA COORDINATOR: Katie Gamble CORPORATE AUDIENCE AUDIT MANAGER: Catherine M. Ronan

40 “Let Me Tell Ya”

by John Schmitt, CWD/PPI Our Industry Loses a Valued Member

For subscription information or service, please contact Customer Service at:

28

Tel: (847) 763-9534 or Fax: (847) 763-9538 or e-mail: [email protected] www.NationalDriller.com

47 Porky’s Hole Thoughts by Howard “Porky” Cutter, MGWC

CONTACT INFO FOR LIST RENTAL CUSTOMERS: POSTAL SR. ACCOUNT MANAGER: Kevin Collopy Phone: 845-731-2684 Toll Free: 800-223-2194, ext. 684 E-Mail: [email protected] E-MAIL SR. ACCOUNT MANAGER: Michael Costantino Phone: 845-731-2748 Toll Free: 800-223-2194, ext. 748 Email: michael.costantino@infogroup

Porky’s Hearing Aids

DEPARTMENTS

BNP CUSTOM MEDIA GROUP Christopher Wilson (248) 244-8264 [email protected]

46 Coming Events

CORPORATE REPRINT MANAGER Jill L. DeVries 248-244-1726 [email protected]

56 Product & Literature Library 60 Bulletin Board 67 A Parting Shot 68 Marketplace

On the Move? You can access National Driller anywhere, any time with your smart phone. Just go to http://gettag.mobi on your phone’s browser to download the free Microsoft Tag app. Then shoot the tag on the right with your phone’s camera, and you’ll go straight to our Web site, where you ‘ll find everything National Driller, including exclusive online content. Or view at www.nationaldriller.com.

60

CORPORATE DIRECTORS PUBLISHING: John R. Schrei CORPORATE STRATEGY DIRECTOR: Rita M. Foumia INFORMATION TECHNOLOGY: Scott Krywko PRODUCTION: Vince M. Miconi MARKETING: Ariane Claire FINANCE: Lisa L. Paulus CREATIVE: Michael T. Powell DIRECTORIES: Nikki Smith HUMAN RESOURCES: Marlene J. Witthoft CONFERENCES & EVENTS: Emily Patten CLEAR SEAS RESEARCH: Beth A. Surowiec NATIONAL DRILLER (ND) (ISSN 1527-1501) is published 12 times annually, monthly, by BNP Media II, L.L.C., 2401 W. Big Beaver Rd., Suite 700, Troy, MI 48084-3333. Telephone: (248) 362-3700, Fax: (248) 362-0317. SUBSCRIPTION RATES: No charge for subscriptions to qualified individuals. Annual rate for subscriptions to nonqualified individuals in the U.S.A.: $115.00 USD. Annual rate for subscriptions to nonqualified individuals in Canada: $149.00 USD (includes GST & postage); all other countries: $165.00 (int’l mail) payable in U.S. funds. Printed in the U.S.A. Copyright 2011, by BNP Media II, L.L.C. All rights reserved. The contents of this publication may not be reproduced in whole or in part without the consent of the publisher. The publisher is not responsible for product claims and representations. Periodicals Postage Paid at Troy, MI and at additional mailing offices. POSTMASTER: Send address changes to: NATIONAL DRILLER, P.O. Box 2146, Skokie, IL 60076. Canada Post: Publications Mail Agreement #40612608. GST account: 131263923. Send returns (Canada) to Pitney Bowes, P.O. Box 25542, London, ON, N6C 6B2. Change of address: Send old address label along with new address to NATIONAL DRILLER, P.O. Box 2146, Skokie, IL 60076.

At Your Desk? Click www.nationaldriller.com:

For single copies or back issues: contact Ann Kalb at (248) 244-6499 or [email protected].

BNP MEDIA HELPS PEOPLE SUCCEED IN BUSINESS WITH SUPERIOR INFORMATION

Social Media Connect with National Driller on-line. ND now is on both Twitter and Facebook.

Member of Member of

Follow us at twitter.com/NationalDriller and/or become a Fan.

Barotherm Gold 1.0 & 1.2

Pre-blended Easy grouting of ground source heat loops is now at your fingertips.

You want to grout your thermal loops flawlessly—and then move on to the next job. Another industry first, the BAROID IDP BAROTHERM® GOLD 1.0 and 1.2 thermally-conductive grout service— precise “ready to go” mixes of high-quality sand and grout—delivers the conductivity you want, while preventing the pump clogging you don’t need. Description Featuring two levels of conductivity, BAROTHERM Gold 1.0 and 1.2 are preblended mixtures of sodium bentonite and high-purity silica (quartz) sand designed for use in grouting boreholes containing ground source heat loops. BAROTHERM GOLD 1.0 thermally-conductive grout yields a grout with a thermal conductivity of 1.0 BTU/hr·ft·ºF (1.73 watts/m·ºC). BAROTHERM GOLD 1.2 yields 1.2 BTU/hr·ft·ºF (2.08 watts/m·ºC). The BAROTHERM GOLD 1.0 and 1.2 Advantage t Single sack system t Produces uniform slurry for smooth pumping–no need to add extra water t Creates a low permeability seal t Develops a permanent, flexible seat to prevent commingling between aquifers t Promotes efficient heat transfer t No heat of hydration t NSF/ANSI Standard 60 Certified t No cement added

Baroid Industrial Drilling Products Technical Service 877-379-7412 281-871-4613 Customer Service 800-735-6075 281-871-4612 www.baroididp.com © 2011 Halliburton. All rights reserved. Card No. 8

Why Do We Have

You’re encouraged to share this important message with your drilling firm’s operations personnel: afety meetings are an opportunity for management and your safety department to communicate to employees how they can do their jobs safer and better.

S

Nothing is more important than the safety of your most important assets. U.S. Navy photo by mass communications specialist 1st class Palmer Pinckney. Topics discussed in safety meetings may be topics that you are familiar with, or topics that you have limited knowledge about. If the topic is something that you are familiar with, it may be easy to tune-out and not listen to the safety information presented. Do yourself a big favor and listen to the information as if you have never heard it before. You may just learn something new – maybe about the newest protective equipment or a smarter, more efficient way to do your job. Information passed on in a safety meeting has a rather important purpose – to stop you or one of your co-workers from being injured. Safety meetings also allow employees an opportunity to relay safety/health concerns or ideas for improvement to their supervisors. Accidents result from unsafe acts or unsafe conditions. For a variety of reasons, unsafe acts typically account for 90 percent of all accidents, according to some experts. Safety meetings serve as a preventive measure against unsafe acts by educating employees on how they can do 10 | NATIONALDRILLER October 2011

their jobs safely. If you still are not sold, let’s look at the potential cost of accidents – more specifically, how accidents can directly affect you. UÊ i>̅ÊqÊThe ultimate unwanted result. Where does this leave your loved ones? UÊ ˆ˜>˜Vˆ>Ê VœÃÌÊ qÊ Lost pay or reduction in pay. Who pays the bills? Are you the sole income producer in your household? UÊ *>ˆ˜Ê >˜`Ê ÃÕvviÀˆ˜}Ê q An obvious detriment desired by no one. UÊ ˆÃ>LˆˆÌÞÊqÊA life-changing experience. Now you’re not able to do what you’re used to doing. Maybe now you can’t cast that fishing rod, ride that bike, hug your wife, lift your child, or simply see? Or perhaps you’re confined to a wheelchair. UÊ œ“«ïÛi˜iÃÃʜ˜ÊLˆ``ˆ˜}ʍœLÃÊq Other than payroll and benefits, workers’ compensation insurance and accident costs may represent the bulk of a company’s operating expense. When a company’s operating expenses

increase, it then is less competitive to bid jobs. If your company is not awarded jobs, where does that leave you? UÊ 9œÕÀÊ Vœ‡ÜœÀŽiÀÃ½Ê Ã>viÌÞÊ q Perhaps you and your co-worker have been working together for some time now. Chances are you may spend as much or more time with your co-workers than you do with your own family. Obviously, you do not want anything bad to happen to them. Watch out for their safety, too. Safety meetings are a perfect opportunity for you to communicate any safety ideas or concerns that you may have. Participate in your safety meetings. If you don’t participate, your ideas will not be heard. Who knows, the idea that you have may very well save a co-worker’s life – or even your own. ND /…ˆÃÊ >À̈ViÊ ˆÃÊ «ÀœÛˆ`i`Ê Ì…ÀœÕ}…Ê ̅iÊ VœÕÀÌiÃÞÊ œvÊ Ì…iÊÌi>“Ê>ÌÊ Àˆ‡->vi°Vœ“]Ê>Ê`Àˆˆ˜}‡Ã«iVˆvˆVÊÃ>viÌÞÊ ÀiÜÕÀViÊ`iÈ}˜i`Ê̜ÊVœ˜Ìˆ˜Õ>ÞÊÕ«`>Ìiʈ“«œÀÌ>˜ÌÊ Ã>viÌÞʈ˜vœÀ“>̈œ˜Ê˜iViÃÃ>ÀÞÊ̜Êi˜ÃÕÀiÊ̅iÊVœ˜ÃˆÃ‡ Ìi˜VÞʜvÊÃÌ>˜`>À`ÃÊ>ÀœÕ˜`Ê̅iÊܜÀ`°ÊÊ

Card No. 17

[email protected]

WAYNE NASH, MGWC

The World According to Wayne

How to Beat the Recession

ith everything slowing down in the housing industry, and a lot of housewell drillers very short on work, a lot of people (myself included) have had to turn to alternatives to keep busy and make a living. So far this year, I have been to Poland, which was very interesting, but not very productive; I have been to the Marcellus Shale play both as a consultant and as a teacher; and now I am in the Bakken Shale play out West in the Williston Basin, supervising fishing operations for one of the biggest service companies in the world. One thing I can say about the current boom in shale drilling: I haven’t seen a boom like this in 30 years, and I’m glad to be alive to see this one. The Marcellus in Pennsylvania is going great guns, and

W

there is a developing infrastructure to support it. Jobs are plentiful, and living conditions generally are good. The specialty jobs still are being filled by hands from the more traditional oilfields, but training locals is coming along nicely. With the economy in the shape it’s in, and the severe downturn in new housing, a lot of house-well drillers are having a very bad year. Drilling is down, service is on an emergency-only basis, the guy down the road is cutting his prices to keep his rig working, and the supply house increases the price every time you buy something. It’s hard to make payroll when the rig is in the yard. Since our industry is a tight-knit group with many family-owned-and-operated

businesses, it is not uncommon to see second-, third- and even fourth-generation drillers in the same company. It has occurred to me that multi-generational drilling companies may be able to take advantage of this situation. Suppose you are a father-and-son drilling company, and there is not enough work to make a check for everyone. If I were in that situation, I’ll tell you what I would do: I’d send my son to the oilfield, at least until the next election. He could learn very important techniques and methods that would benefit the company when he comes home, have an adventure, and make a good check while he’s doing it. To the father: When you get him back, you will have a seasoned hand with a bet-

9570-VTR See the 9570-VTR in action at 1

www.ams-samplers.com/9570-vtr-video 1

3,000 lb. Hydraulic Hi-Speed Winch Requires Less Operator Attention

2

4,000 ft-lb. Hydraulic Auger and 201 ft-lb. Hammer with Hydraulic Pivot & Locking Systems

3

New Auto-Drop Hammer with Improved Hammering Capability & Functionality

4

Stronger Mast with a Larger Foot for Increased Stability and Pullback Force

5

Tier 4, 60 HP John Deere, Liquid-Cooled Diesel Engine with 30 Gallons Fuel Storage

6

Hydraulic Tooling Rack with Increased Capacity for 4ft and 5ft Tooling

7

Dozer blade functions as independent outriggers and accessory carrier

8

Run Everything from an Easy-To-Use Control Panel with Digital Engine Diagnostics Display

9

Stow-Away Control Panel Arm to Store Panel Inside During Transport

3

2

The hammer, auger, winch, and auto-drop can all be positioned over the same borehole without realigning or repositioning the rig More Compact Height and Width Fully Equipped Weight Under 12,000 lbs. with a Lower Center of Gravity

6

5 8 9

7

4

800-635-7330 12 | NATIONALDRILLER October 2011

[email protected]

Card No. 59

www.ams-powerprobe.com

Oil well in the Williston Basin. Photo courtesy of USGS. ter skill-set than when you sent him off, and you don’t have to feed him. To the son: This might be the biggest adventure of your life, next to the military. You are going to have to man-up, put on your big-girl panties, and take care of yourself. Momma won’t be there to cook for you or mend your boo-boos. The good part is that you will bring home a check bigger than Daddy could ever pay you. If you want a challenge and fairly easy conditions, go to the Marcellus. The infrastructure is there, and conditions are pretty good. The drilling is easy, and not too deep. Rig moves are kinda tricky because of the terrain and the fine Pennsylvania highway system, but most distances aren’t too bad. If you really want to man-up and work on the cutting-edge of drilling technology, come to the Bakken. You can learn more and make more money than anywhere in the world right now. Entry-level positions are around $80,000 a year, if you are willing to work. And since there isn’t much else to do, work is all that is here. Housing is pretty much non-existent, so make sure you have a place to stay when you go or bring your own house. This might be the time to borrow Dad’s motorhome. You can do anything you are interested in. The unemployment rate is lowest in the United States, and anybody who wants a job can have his pick. Heck, even my idiot brother Willard has a job. Weather conditions can be a mite tough. Winters get to -40 degrees F, with 30 inches to 40 inches of snow per year and frequent white-outs, but if you can handle it, no problem. Bring most of what you need with you; this is an empty area. It’s possible to drive 100 miles without seeing a tree, and the only thing between here and the North Pole is a barbed wire fence, and half of it is down. There is an occasional Wal-Mart, but be prepared to drive a while to get there. The drilling industry is crying for hands, and this might be the perfect opportunity for a young man (or woman, the ratio here is 60% men to 40% women). If you are a woman, you can have your pick of jobs and fine young roughnecks with good checks. Just sayin’. Something to think about while you are waiting for the housing market to pick up. If you are interested, send me an e-mail, I’ll try to hook you up. ND
vÌiÀÊ …iÊ >˜`Ê ˆ˜ÕÃÊ `iV>“«Ê vÀœ“Ê ̅iÊ «Õ“«Žˆ˜Ê «>ÌV…]Ê 7>ޘiÊ >Ã…Ê V>˜Ê LiÊ Ài>V…i`Ê>ÌÊÀœVŽLˆÌnJ…œÌ“>ˆ°Vœ“°Ê

Card No. 1

www.NationalDriller.com | 13

Keeping Rail Project on Track

A quiet morning in front of the Minnesota state capitol building, pulling samples along the route of the Central Corridor Light Rail Transit line.

B

raun Intertec, Minneapolis, used its Geoprobe 7720DT and 6620DT rigs to collect environmental samples on a 10-mile stretch of roadway prior to construction of the new Central Corridor Light Rail Transit (CCLRT) line. The rail line, which will run through a mix of neighborhoods, commercial and industrial areas, will offer commuter service between Minneapolis and St. Paul – Minnesota’s two largest cities. The CCLRT line should begin service in 2014. According to Greg Bialon, Braun Intertec’s drilling manager, the overall versatility, power and size of the 7720DT made it a good match for the proj14 | NATIONALDRILLER October 2011

ect. “We needed something with versatility to go off-road and use in a variety of settings,” Bialon explains, “but still narrow enough to collect soil

samples from inside buildings. We were extremely pleased with how it performed on the project.” The 6620DT, a smaller version of the 7720DT, provided additional assistance on the job. During a 100-day period, two Braun Intertec field teams collected soil and ground water samples from about 500 borings along the proposed rail line. “Having two rigs on the job helped keep the drilling on schedule,” says Jaclyn Dylla, a project manager for Braun Intertec. “We assigned two field scientists to each rig to keep up with the large amount of footage produced during this (Continued on Page 18)

DIVERTECH

By

WASHINGTON ROTATING CONTROL HEADS, INC. 3PRINGlELD!VEs0/"OXs7ASHINGTON 0! 

0HONE  &AX   www.washingtonrotating.com 7EMANUFACTUREACOMPLETELINEOF2OTATING#ONTROL(EADS as well as Non-Rotating Diverters Sizes up to 30” Table Drive or Top Drive for all applications. 7HETHERYOUAREDRILLINGOIL GAS WATER we have a Diverter to do the job!

0.%5-!4)#$)6%24%23934%!00,)#!4)/.3 s7ATER7ELLs-ONITORING7ELLs#ONSTRUCTIONs"LASTHOLE3AMPLINGs-INERAL'RADE#ONTROLs5NDERGROUND-ININGs s/ILAND'AS7ELL3PUDDINGs!NCHOR(OLE$RILLINGs/IL'AS$RILLINGs

The $IVERTECH 0NEUMATIC $IVERTer System is equipped with a multistage flow through rubber boot system, which is inflated with air. Inflated to only 10 psi, the boot sysTEM ON THE STANDARD UNIT EXERTS OVER 1000 pounds of pressure against THE GROUND /NCE INmATED THE BOOT requires no further air flow to remain pressurized. Since the boot is mEXIBLE ADEQUATE SEALING IS OBTAINED even on unlevel terrain. A small, easily mounted vacuum sytem is used to retract the boot to “travel” position.

The $IVERTECH 0NEUMATIC $IVERTER System is a compact, easy to install accessory for diverting drill cuttings AWAY FROM THE DRILL RIG 4HE 0ATENTED &LOW THRU "OOT EXPANDS FROM THE Divertech spool to form a seal against the ground or rock face, allowing cutTINGS TO BE DIVERTED THROUGH A &LOW ,INE WITH OR WITHOUT CASING IN THE borehole.

STRIPPER AND WIPER RUBBERS

The 3021 Diverter is manufactured to work on your casing. It can be flanged to casing, threaded on casing, or can be made up with the compression lock system. The compression lock system is simple and full proof. Simply slide Diverter over casing and tighten 3 bolts on compression ring. The rubber rings enclosed are then compressed around your casing providing a slipproof lock and seal on plastic casing as well as steel. The 3021 Diverter utilizes our 3010 Split Stripper Rubber, which enables user quick and easy access to borehole. Using a common hinge point and quick release latch system, the 3010 Split Stripper Rubber can be quickly and effortlessly opened and closed around drill string.

“WE PUT DRILL CUTTINGS WHERE YOU WANT THEM” Card No. 15

www.NationalDriller.com | 15

RD20 XC D RILL R IG

D IRECTIONAL - D RILLING B RAKE S YSTEM

Predator Drilling System

Stockdale Mine Supply, LLC

“Eastern US Sales and Support for Natural Gas & Oilfield Drilling Equipment.” Atlas Copco Construction and Mining Equipment Sales and Support for MI, OH, PA, WV.

MAIN OFFICE:12655 Route 536, Punxsutawney, PA s800.626.2298 BRANCH OFFICES:315 Zane Grey Rd., Norwich, OH s800.628.4135 443 Hawthorne Dr., Norton, VA s276.679.1750 (Keystone Drill Services-Office)

 Michael D. Hetzler – Drill Sales Manager 814.591.2611

 Archie Lennon – OH Branch Manager 740.872.3255 55 55

 Todd Armstrong – Drill Sales 740.624.4772

 Tony Funk – VA Branch Manager 276.679.1750

www.stockdaleminesupply.com

Authorized distributor

Stockdale Mine Supply, LLC ! W O N BLE

A L I A V A

Increasing Efficiency in Drilling! Realtime look at what is happing at the Bottom of the Hole!

SYMMETRIX: Overburden Drilling Made Easy! Reduce your Top Hole Time!

s/IL'AS s&OUNDATION Drilling s'EOTHERMAL

PRE-OWNED DRILLS:

- #9-2004 IR RD20III Package - #13-2003 IR RD20 II sn6847 - 1996 IR RD20II - 1999 & 2000 IR RD20II - Used Schramm T130XD

Waterwell Drills - 2007 T4W50K w/ spur gear head. - 1978 Chicago Pneumatic 670 - 1989 TW70K - 1995 IR T3W

#1-2002 IR RD20III sn6736 Tandem

Additional Oil & Gas Drills - #5-2007 Atlas RD20 III sn21041 Package - #6-2006 Atlas RD20 III - #7-2006 Atlas RD20 III Package - #8-2003 IR RD20 III Package

- ECM590RR - 1982 Chicago Pneumatic 700 - Atlas Copco CM780D - 2006 Atlas Copco ROC D7-LM - ECM670 - 2005 ECM660 - 1991 DM30HP - 1991 Reedrill SK35HP Truck mounted - Reedrill SK40 crawler 750/150 - Coming in OCT: 1999 IR - T4BH 900/3

Below Units are Located Overseas:

Compressors - 1988 IRXHP 750WCAT - Atlas XAS350 - Sullair 750/250

Additional Blasthole Drills - #31-1994 IR ECM370 - #33- 1997 IR ECM690

- 2007 Atlas Copco CM780D - 4000 hrs - 2005 Atlas Copco CM780D - 7500 hrs - 2003 Atlas Copco CM780D - 6000 hrs - 2005 Atlas Copco CM760D - 3500 hrs - 2003 Atlas Copco CM760D - 5000 hrs - 2003 Atlas Copco F9 - 4000 hrs

 Michael D. Hetzler – Drill Sales Manager 814.591.2611

 Archie Lennon – OH Branch Manager 740.872.3255 255

 Todd Armstrong – Drill Sales 740.624.4772

 Tony Funk – VA Branch Manager 276.679.1750

www.stockdaleminesupply.com Card No. 7

Authorized distributor

(Braun - Continued from Page 14)

Mark Barber, driller for Braun Intertec, moves the 7720DT into position along the CCLRT route near the capitol building in St. Paul, Minn. The field teams found the rig convenient to use when drilling on the busy roadways with underground utilities and limited access due to traffic and parked cars.

The small footprint of the rigs, which is smaller than a regular pickup truck, was a real plus while working in high-traffic areas along the CCLRT line. fast-paced project.” The alignment where the two teams were drilling is densely populated with heavy pedestrian, car and bus traffic. Most of the borings involved penetration through roadways with underlying urban fill to depths of 20 feet to 40 feet. “The average boring depth was about 25 feet,” notes Dylla. “Each field team drilled about 150 feet per day.” The small footprint of the rigs, which is smaller than a regular pickup truck, was a real plus while working in high-traffic areas along the CCLRT

Paul Bernier, driller for Braun Intertec, uses a 7720DT and DT325 tooling for soil sample collection along the Central Corridor Light Rail Transit route. The large core size of the 3.25-inchdiameter tooling allowed for a wide array of laboratory analyses, and made ground water sample collection easier. 18 | NATIONALDRILLER October 2011

line. “We could easily park the rigs at an angle while staying inside of a closed driving lane, and still get the subsurface information we needed,” says Dylla. The field teams drilled approximately 12,000 feet during the project, and collected about 900 soil and ground water samples. The samples were analyzed in the Braun Intertec analytical laboratory. On-site field computers allowed the field crews to draft and publish boring logs, field notes and other important information and documents for clients in a near real-time basis. The electronic documentation was uploaded, along with boring information, onto a searchable project web portal called Braun Interport Custom. The estimated project cost for the CCLRT is $957 million. Project designers forecast an average weekday ridership of 40,000 by the year 2030. ND

Card No. 45

www.NationalDriller.com | 19

BOB PELIKAN

Tech Topics

Using Multiple Pressure Tanks for Larger Systems The fundamentals of pumped water systems

he primary function of the pressure tank in a pumped water system is to protect the pump motor. This is accomplished by storing water under pressure so the pump does not have to come on every time there is a small, intermittent demand for water. The amount of usable water stored in a pressure tank is called the drawdown, and is the amount of water that can be drawn from the tank between the time the pressure switch cuts out, turning off the pump, and it cuts back in, turning on the pump. We showed how to calculate drawdown in the August 2011 issue of this publication. Figure 1 depicts what goes on

T

inside a captive-air pressure tank as the water is drawn out and the pressure drops. Pressure tanks are sized according to the flow capacity of the pump, with enough drawdown to allow the pump to be off for a minimum of one minute between run cycles to let the motor cool as recommended by the motor manufacturers. A 10-gpm pump would require a pressure tank with 10 gallons of drawdown, and so on. There are two types of pressure tanks – captive-air tanks (also called pre-charged, diaphragm or bladder tanks) and conventional tanks (also known as hydro-pneumatic, galva-

Figure 3. Proper pressure switch placement.

Figure 1. Captive-air tank water chamber during the drawdown cycle.

Figure 2. Proper pressure switch placement.

Rauch Manufacturing, Inc. The Newest Introduces: Work Smarter...Not Harder! der! t
1JQF
4J[FT
TQJOT
w
UP
w .0%&-
)

t
)BSEFO
SPMMFST
GPS
FOIBODFE

HSJQQJOH
QPXFS

MPOHFS
MJGF t
&BTZ
JOTUBMMBUJPO

NBJOUFOBODF t
2VJDL
QJQF
TJ[F
BEKVTUNFOU - Drill pipe - Casing - Drop pipe

t

ZFBS
XBSSBOUZ "MM

OFX
IZESBVMJD
PQFSBUFE
3BVDI
4QJOOFS
.PEFM
)

DPNQBDU
EFTJHO . E M ) UE J

RAUCH MANUFACTU MANUFACTURING, MANUFA ACTUR RING IINC. NC 1132 Banks Lowman Hwy, Garden Valley ID 83622 Ph: 208-462-3722 Fax: 208-462-2209

XXXSBVDINGHDPN

r

SBVDINGH!GSPOUJFSOFUOFU Card No. 2

20 | NATIONALDRILLER October 2011

nized, ASME and epoxy-lined tanks). Using the term “hydro-pneumatic” to describe a conventional tank is a bit of a misnomer. All pressure tanks used in the ground water industry are hydro-pneumatic, meaning they contain water (hydro) and air (pneumatic). In this article, we will use the terms “captive-air” and “conventional” to identify the two different types of tanks. The largest commonly available captive-air tank has a total capacity of 119 gallons. The size of a precharged captive-air tank is limited by federal highway regulations, which require special permits to transport pre-charged pressurized tanks having a capacity of 120 gallons or more. The drawdown or usable water available from a 119-gallon tank operating in conjunction with a 30/50 pressure switch is 36.8 gallons, according to Boyle’s Law. Following the one-minute-run-time-between-cycles rule mentioned above, a 36-gpm pump would be the largest pump you could use with such a tank. What to do, then, if you have a larger pump? There are several options. Conventional tanks are available in virtually any size, and are a viable option. They are, however, expensive, and require the use of an air-charging system to replace the air that is absorbed into the water. For this reason, the use of multiple captive-air tanks is gaining in popularity. It is not uncommon to see six or eight captive-air tanks lined up in a row to provide the necessary drawdown for a large pump. For instance, six 119-gallon tanks would provide enough drawdown for a 200-gpm pump (6 x 36.8 = 220.8 gallons). The size and number of tanks you end up with will depend on economics and

available real estate for your tanks. It might turn out that eight of the more common and less expensive 85-gallon tanks with a drawdown of 26.4 gallons each would be cheaper than six 119-gallon tanks, but be sure to figure in the cost of the manifold system in your total.

Plumbing a Multi-tank System It is very important that a multitank system be plumbed correctly for it to work properly. There are two common mistakes made on these systems – locating the pressure switch in the wrong place and under-sizing the interconnecting piping. The two basic rules to follow: 1. Make sure all the tanks see the same pressure while the pump is running. 2. Make sure the pressure switch sees the same pressure as the tanks. To comply with rule 1, use a largeenough manifold pipe to assure the flow velocity does not exceed 6 feet per second. This will keep the pressure drop to a minimum from one end to the other, and help assure uniform pressure in the entire tank system. As a refresher on how to size your piping system, refer to this series in the January and February 2011 issues of National Driller. To comply with rule 2, place the pressure switch as close to the center of the tanks as possible. Figures 2 and 3 illustrate proper pressure switch placement. When properly designed and installed, the use of multiple residential-type pressure tanks in a larger high-capacity system offers a viable alternative to a single, large conventional pressure tank. Next time you need more tank capacity, give this alternative some consideration. ND

Mincon is with you from mineral exploration through production mining.

Find It!

World o ld class reverse circulation circulat n hammers and bits that have set the standard in geological sampling and grade control. Performance driven DTH hammers and bits that provide maximum productivity through total reliability, long service life and minimal spares usage.

Min Mi www.mincon.com Ask for Mincon at your local supplier Mincon, Inc. - Call toll free 888 9MINCON for a supplier near you. Card No. 26

www ww w ww NationalDriller w Na N atio tiio ion nal na alllDri a Dri Dr D rriille ller ccom ll om | 2 om 21 1

Water for Life – Bringing Quality Water to Haiti by Joe Bradfield

n 1971, Willis Miller set out to make a contribution in this life that truly would matter. He moved to Haiti where, in spite of living on an island, much of the population lived without access to clean drinking water. For the next 10 years, he drilled water wells with several companies, intent on sharing God’s love by giving people what has been the most powerful symbol of life for every culture from the beginning of time. However, with no investment by the primary stake-

I

holders, the pumps fell into disrepair. The islanders returned to dirty creeks and backwaters for drinking water, and waterborne diseases and maladies ensued. Ten years after he started, Miller went back home to Wapello, Iowa, defeated. His farmer friend Kenneth Grimm didn’t let him quit. Grimm sold farm equipment, rented out 250 acres of land, and, within three months, brought Miller $30,000 dollars, saying, “You can do it.” So Miller returned to Haiti to start his own well drilling ministry. For the past 28 years, his operation has continued as a diverse, multidenominational mission that’s been so successful that it recently added another drill rig – an Atlas Copco T2W.

Origin of Water for Life Leon Miller, who joined his father in the Haiti mission in 1985, retells the story of how the mission got its name. “We always wanted people to realize the love of Jesus in this. The villagers are so happy when we hit water. They hug you. They kiss you. To the people, the driller is a kind of a hero.” In that first year, Leon says a missionary named Marion Layman, witnessing just 22 | NATIONALDRILLER October 2011

such a celebration, remarked to his father, “Water is life. So you should call your mission ‘Water for Life.’” And so his father did, pleased with its Christian overtones. Today, there are several organizations in the world with missions named “Water for Life,” but there is no real affiliation among them other than that they bear the same name. To distinguish their operation from others, the Millers simply added “Haiti” to their company moniker, becoming “Water for Life Haiti.”

Strong As Ever Though Leon and his wife came back to give their children a more customary American lifestyle while the children grew up, he has been continuously involved with Water for Life for 25 years. Leon’s nephew, Troy Miller, has been the primary driller for the past three years. He lives in remote areas among the Haitian people, who provide him with food and lodging during his work. And Leon’s brother-in-law, Leonard Hochstedler, serves as home office administrator back in Iowa, ordering and arranging shipping for parts and supplies, casing and pumps, and taking care of all the paperwork. At age 90, Willis is officially retired, though he still is involved with Water for Life Haiti even today from his home in Kalona, Iowa. (Continued on Page 24)

Card No. 34

www.NationalDriller.com | 23

(Haiti - Continued from Page 22) Prior to his return to the United States with his uncle Leon to pick up their new Atlas Copco T2W, Troy had just completed the 798th 5-inch well. These wells are drilled in abrasive volcanic rock with some shale at altitude, and in sand and gravel formations in the bottom lands. They have drilled to as deep as 800 feet or more, but the average well is 125 feet to 150 feet deep. Wells drilled closer to the coastlines run the risk of hitting brine, but they have been fairly successful; only 50 of the wells have had to be abandoned as dry or too salty.

Irrigation’s Impact Soon after Water for Life Haiti started its mission, Grimm devised an irrigation plan. There was good soil here with water just 100 feet below it. So they drilled a

10-inch well, and installed a diesel-powered turbine to provide flood irrigation from the 900-gpm water source. Once the land was cleared and watered, the people began growing corn, beans, banana trees and vegetables. Next, Grimm’s generous contacts from Nebraska provided 750-foot-long center-pivot irrigation sprinklers. The irrigated circles beneath the sprinklers were divided into halfacre, pie-shaped lots for family gardens. Irrigation’s success meant the people now needed a corn grinder for all the grain they raised. Water for Life provided one, as well as a walk-in cooler for storage, which local fishermen also began to use to keep their catches fresh. The benefits just continued to escalate from there. For instance, with ample water available and more abundant food, children who had been a critical labor force for daily sustenance now were free to attend school.

Today’s Operations One significant difference between today’s Water for Life operation and Willis Miller’s initial experience drilling in the 1970s is that the primary stakeholders must invest in the project, raising funds for a well. The example given was around $200 in Haitian dollars. This may seem nominal by American standards, but it is a significant amount for a Haitian community to raise. And to maintain the wells, Water for Life now has a Haitian crew that operates a truck with a winch on back that can go wherever repairs are needed. Repairs also require community funding. Primary stakeholders now take measures to protect the pump from carelessness and abuse. The result is that pumps last much longer, since community leaders know they will have to come up with the money again for any upkeep. Water for Life will not turn away from need, though. Leon says that the organization knows too well that if a village can’t fix a pump, the villagers will go back to drinking dirty water, and the cycle of disease will begin again. Larger expenses are paid from donations abroad, such as those for a bulldozer and a dump truck drill for opening or upgrading roads to the sites for drilling the wells. Leon says God surely is indicating that he wants the mission to continue, because money for these essential machines comes in when it’s needed, as now, with the purchase of the new T2W.

Choosing the Rig The T2W was well-endorsed by the team’s resident equipment specialist, Harold “Buck” White. White first started working on drilling sites with his father when he was 8 years old. By the age of 18, he was a driller himself. During the time he was a salesman for Ingersoll–Rand in (Continued on Page 26) 24 | NATIONALDRILLER October 2011

Card No. 61

Card No. 35

(Haiti - Continued from Page 24) Villa Park, Ill., he met Leon Miller, and sold Water for Life its first drill – a competitor’s model. Now retired, White remains dedicated to what he calls an “awesome, awesome mission,” saying Leon’s crews “drill wells as real water well drillers, not just churchy people.” According to White, these men aren’t just visiting missionaries, but real drillers, living out in the middle of nowhere. All told, White has been to Haiti 28 times to help out with that first rig, finetuning it and repairing it.

Testing the Rig The rig traveled from the Atlas Copco manufacturing facility in Garland, Texas, directly to Milwaukee, Wis., for performance testing in Atlas Copco’s Waterwell Center of Excellence. Leon and Troy came to

Milwaukee from Haiti to take possession. In the unusually cold April the Midwest was enduring, they drove it to Kalona, Iowa, to initiate the debug-

ging process of a new rig. Here they put its mud-drilling capability to the test. It had no problem in the rich farmland soil, but they really wanted

to try it in rock with their new Atlas Copco TD 40 hammer. Clint Madison’s farm near Williford, Ark., was the perfect place. He had plenty of rock, and his place was on the way to Ft. Lauderdale, Fla., where the rig would be loaded for shipment by sea. White had met Clint Madison of Madison Drilling near Williford, Ark., also while he was working as an Ingersoll-Rand salesman. Madison has a reputation for being able to fix or fabricate anything, and his farm bears this out with not only his own drill rig, but a vast array of machinery, including antique tractors and a tail-dragger airplane. He says that he’s been “turning wrenches” for Water for Life Haiti for years, and his son Rob has joined him in Haiti to make repairs. On the Madison farm, Troy quickly drilled through the unconsolidated soil of a low-lying pasture within a shout of the Madison homestead. Then he switched out the mud drill and tricone to put in the hammer. White and Madison joined Troy at the rig as it worked, and Troy fairly quickly found 21⁄2 feet per minute in limestone with an 8-inch bit on the TD 40. Leon explains that they needed to really put the rig through its paces, debugging it thoroughly, because once they got it back to Haiti, they would be far from support. “The pressures are dead on,” notes White. “I was ready to make adjustments but they didn’t need any. They did an excellent job up in Milwaukee,” referring to the Atlas Copco Waterwell Center of Excellence, where the rig had been gone over in systematic detail before Water for Life Haiti took possession. “Not just any rig can handle those roads,” Leon stresses. White agrees, adding, “It would tear the carriages right off a lot of other rigs.” For the extra margin of comfort, they did take the precaution of ordering their rig with lifting blocks under the suspension to raise everything another 4 inches. But its big wheels, ample power and small footprint ensured that it would be up to the demanding island environment. ND Joe Bradfield is senior writer for Ellenbecker Communications, an international communications firm specializing in the drilling, mining and construction industries.

26 | NATIONALDRILLER October 2011

Card No. 14

ROTARY VERSION N O W AVA I L A B L E! SMALLER ENGINE MEANS ONE-HALF THE FUEL CONSUMPTION OF THE AIR UNIT.

THE EARTHPRO 4550X Safe and efficient hydraulic key/vise table design that is fast and versatile for breaking pipe connections and replacing bits on hammers. Design allows for no loose tooling or pipe wrenches that can break or fly from the rig.

The EarthPro Geothermal Drills feature a single operator setup providing ease of use and solid job profitability. The Astec EarthPro Geothermal 4550X is designed to meet the specialized demands of geothermal system installations. Its superior field mobility, power, and state-of-the-art technology make it ideally suited to high-production drilling applications. Astec Underground engineers conducted extensive field studies with geothermal system installers and incorporated suggestions by veteran drillers into the design of the EarthPro Geothermal 4550X. It uses technology that has made Astec Underground an innovative leader in the horizontal directional drilling industry.

astecunderground.com

Card No. 62

www.NationalDriller.com | 27

GEORGE DUGAN

Drilling Fluids

HDD Geothermal Loop Installation

A ground source heat pump residential retrofit project in Rock Hill, S.C.

The backyard on the property.

xtreme weather conditions, such as the harsh deep freeze we endured this past winter or the stifling record heat that blanketed the United States this summer, should be enough to convince any business or homeowner about the benefits of geothermal heating and cooling sys-

installation of header pipes that connect the loops to geothermal heating and cooling systems. The benefits of horizontal directional drilling can be fully appreciated in ground source heat pump (GSHP) retrofit applications where well-established landscaping and structures present a

E

28 | NATIONALDRILLER October 2011

tems, not to mention the accompanying federal and state tax credits that are available. Although vertical drilling is the most common method of geothermal loop installation, horizontal directional drilling offers additional benefits, options and flexibility for loop installation, along with the

Card No. 41

problem. Benefits of horizontal directional drilling were realized on a recently completed residential retrofit project in Rock Hill, S.C. Harold Peeples, owner of Tarheel Contractors Supply, needed to up(Continued on Page 30)

FOR ALL YOUR

COMPRESSED AIR NEEDS "
 
!
  (

CFM
to
 
CFM (

PSI
to

PSI (
"
#
$
& (
'
#)
$
&
 
PSI) "
!   (

HP
to

HP (

CFM
to
 
CFM (

PSI
to

PSI

R

R


')$
'%%)
)#./

0

+
, ,*+"&

 

 
)&
"$$
)"-

0

"-)-".

 


 
$
#



 
$
#
  

Email: [email protected] Web: http://compressedair.ringpower.com

FOR ALL YOUR

COMPRESSED AIR NEEDS #"
 
" !#
 !""!" &
 
CFM
to
2232
CFM &

PSI
to

PSI &

Shore
Packages
Available &

Frame
Packages
Available #"
 $!!
"#!" &

CFM
to

CFM &

PSI
to

PSI &
#!"
%# "!
Available


')$
'%%)
)#./

0

+
, ,*+"&

 

 
)&
"$$
)"-

0

"-)-".

 


 
&
%
  


  
&
%
   Card No. 49

Email: [email protected] Web: http://compressedair.ringpower.com www.NationalDriller.com | 29

(Dugan - Continued from Page 28) grade his residential heating and cooling system. As a supplier to both the geothermal heating and cooling industry and the HDD market, Peeples is well aware of the benefits these two converging technologies have to offer. A vertical drill would have severely damaged the extensive backyard landscaping, and installing loops in the front yard just was not an option; therefore, horizontal directional drilling was the only logical choice. Utilizing a Ditch Witch 1220 horizontal directional drill, Lee Electric from Aberdeen, N.C., set up and drilled from the side of the road, under the fence and landscaping, and punched out into an exit pit just beyond the end of the driveway. Once the drill punched out into the exit Property layout.

;I´VIQEOMRKERIZIRFMKKIVWTPEWL

4VIQMYQL]HVSGEVFSRJVII W]RXLIXMGJSVQYPEPYFVMGERX JSVTRIYQEXMGIUYMTQIRXERH [MVIVSTIGEFPIW2SRXS\MG ERHIRZMVSRQIRXEPP]WEJI

2SRQIXEPPMG IRZMVSRQIRXEPP]WEJI QIXEPJVIIHVMPPMRKGSQTSYRH [MXLWYTIVMSVEHLIWMSRXS[IX WXIIPWYVJEGIWERHVIWMWXERX XS[EXIV[EWLSJJ 27*%27-'IVX'

27*%27-'IVX'

.)809&)-2' ,SQIWXIEH6H7YMXI ,SYWXSR8I\EW  8IP*E\ )QEMPWEPIW$NIXPYFIGSQ [[[NIXPYFIGSQ

.)809&)3*'%2%(%08( XL7XVIIX )HQSRXSR%PFIV XE'EREHE8)7 8IP*E\ )QEMPWEPIW$NIXPYFIGEREHEGSQ 

.)809&) 9/ 08( .IX0YFI,SYWI6IJSVQ6H 1EMHIRLIEH &IVOWLMVI)RKPERH70&= 8IP *E\ )QEMPYOWEPIW$NIXPYFIGSQ

*YPP]W]RXLIXMG L]HVSGEVFSRJVIIQSRMXSV [IPPHVMPPTMTIGSQTSYRHXLEX TVSZMHIWQE\MQYQXLVIEH TVSXIGXMSRERHTVIZIRXWWIM^MRK )RZMVSRQIRXEPP]WEJI 27*%27-'IVX'

pit, 1-inch geothermal loops, along with a 1 1⁄4-inch grout tremie line, were pulled behind the drill bit, back toward the drill entry point. Mule tape was utilized as a spacer between the u-bend and the bit, so that when the bit was out of the ground, and the mule tape was cut loose, the u-bend of the loop was in the desired position/depth. Additional depth (35-ft. deep) was added to the bore profile to compensate for the lack of linear footage, and six 250-foot-long, 1-inch-diameter loops were installed. After the installation of each loop, a thermally enhanced grout mixture of 16 gallons of water, a 150-pound bag of geothermal grout, and 200 pounds of sized silica sand (provided by U.S. Silica), was pumped through the tremie line via a ChemGrout grout mixing and pumping unit to fill the void area between the loops and the borehole. This recipe was used to achieve a thermal conductivity of 0.90 Btu/hr/ft/F. Thermally enhanced grout increases the efficiency of the ground loop system by providing better heat transfer from heat loops to the earth, and the grout provides a low permeability seal in the annular space of the borehole. After all of the loops were installed and grouted, the drill was repositioned behind the exit pit where Lee Electric drilled from the exit pit, under the driveway, and punched out into a small exit pit below a crawl space under the house. Once they punched out under the crawl space, two 11⁄4-inch header pipes, which connected the loops to the geothermal heating and cooling system in the house, were pulled back. Panther Heating and Cooling of Rock Hill, S.C., installed the WaterFurnace heating and cooling system, purged the loops, and got the system up and running in time for the Christmas holiday season. Horizontal directional drilling provided a means of installing the geothermal loops and header pipes (Continued on Page 32)

30 | NATIONALDRILLER October 2011

Card No. 53

TEI ROCK DRILLS MONTROSE, COLORADO USA

Sunset on the Andes, Chile

TE260 Drifter

TE260 in the hard rock mines of South Africa

SUPPLIER TO THE WORLD FOR DRILLING ATTACHMENTS AND LIMITED ACCESS DRILLS HYDRAULIC DRIFTERS AND ROTARY HEADS HEM550 Soil Nails in England

Telluride, Colorado HEM350 Blast holes

HEM350 New Zealand “Lord of the Rings Mountains”

(800) 777-3745 | www.teirockdrills.com Card No. 28

(Dugan - Continued from Page 30)

Lee Electric on the job.

The tremie line. without damaging the picturesque backyard. Today, there are no visible signs outside of the home to indicate that such a system was installed and operating – other than the lack of a noisy air-conditioning unit and an electrical meter that now turns quite a bit slower. Peeples and his wife have been enjoying the comfort and savings provided by the WaterFurnace ground source heating and cooling system, which immediately was put to the test by starting up in the harsh winter of 20102011 before going up against recordhigh temperatures of the summer of 2011. ND George Dugan is a regional manager for CETCO.

Bore profile.

Mills Bit Service Inc. Family Business Since 1983

Pro ud ly

Pre se nts

Life Force PDC s Oil field quality matrix and PDC cutters. s Our PDC bits last longer and stay in gauge longer because of design. s We repair all brands of PDC bits.

WE SPECIALIZE IN PDC REPAIR OF ALL MAKES OF BITS! We use an oven not a torch to repair our PDC’s. We can repair and get them back to you in a few days if needed.

TRY THE BEST!

s Repeat business fuels our future. s We use New PDC cutters in our New bits, not reconditioned.

™

s/IL'ASs'EOTHERMALs-INING ' H L -I -I I s7ATER7ELLs2OAD"ORING

Proud member of:

www.MillsBitServiceInc.com | [email protected] | Ph: 940.781.8014 | Fx: 940.872.3726

Toll Free: 877.707.6284 (U.S. & Canada)

SERVICE ABOVE AND BEYOND YOUR NEEDS

32 | NATIONALDRILLER October 2011

Card No. 82

MORE THAN 2600 GOOD REASONS TO KEEP ON CHOOSING THE C6 With more than 2600 units sold since 1979, the C6 is the world’s best selling hydraulic crawler foundation drilling rig. During the past 30 years, performance, reliability and versatility have ensured that the C6 has built a level of trust with foundation contractors such that it is considered the unrivalled industry benchmark for this type of equipment. Now, the next evolution of the C6, called the C6XP with XP standing for extra performance, is ready to be released.

VISIT OUR NEW FACILITY Casagrande USA, Inc. 93 Stickles Pond Road, Newton NJ 07860 casagrande-usa.com

C6 XP

MAIN INNOVATIONS FULL LOAD SENSING FRONT OF THE WALL DRILLING PLC CONTROL

OUR NETWORK IN THE U.S.A.

Main: 1623 Mission Drive - Suite 6 - Solvang - CA 93463 Service Center: 1046 Carrier Pkwy - Bakersfield - CA 93308 Toll Free 800-656-6766 hennessyinternational.com

WEST

888-45-DRILL - Tahlequah - Oklahoma 888-55-DRILL - Georgetown - Texas venturedrillingsupply.com

SOUTH AND CENTRAL Card No. 51

Headquarters Rural Hall - NC 877-207-6062 Branch office Miami - FL 305-929-8572 IDEDrills.com

EAST

www.NationalDriller.com | 33

USED EQUIPMENT 800.759.7441



gefco.com

GEFCO Service Center Our in-house service team offers everything from rotary table and tophead repairs to complete rig refurbishing. We specialize in component rebuilds, hydraulic system trouble shooting and repairs and overall rig service.

2006 50K

We also offer in-house service for all King Oil Tools products. Contact your GEFCO Service Department today to schedule your repair needs!

1994 30K JON NEWSOM WEST REGIONAL SALES MANAGER 916.663.3698

MIKE LEWIS ROCKY MTN./TEXAS REGIONAL SALES MANAGER 214.208.1653

CHIP NELSON MID-WEST REGIONAL SALES MANAGER 800.759.7441 EXT. 252

ROCKY MILANO NORTHEAST REGIONAL SALES MANAGER 609.432.1780

Contact your GEFCO salesman for your used equipment needs.

No one is more serious about your job than we are. When you’ve been around for over 70 years and invented a lot of the tools that are industry standard worldwide, you tend to develop a certain amount of confidence in your product. We offer over 40 models of swivels, handling tools, and other drilling equipment made with high-quality heat-treated steel alloys and tested in our own 300,000-square-foot facility. It’s a serious business, and no one is more serious about it than we are. Got a tough job ahead? Bring it on.

Small Opening 1J, 2J, 5EL

Rotating Heads 2.5 BL, 3 BL, 3APE

OEM Replacement 15KF

Breaking O Outt 2 3/8” to 7” TONG

Adjustable Adj stable 10-30 XV LINE and 20 & 25 XVA


4
7BO
#VSFO

t

&OJE
0LMBIPNB


t



t



t

LJOHPJMUPPMTDPN

ISO 9001:2000 8C-0067

34 | NATIONALDRILLER October 2011

Card No. 30

Field Proven. œÀʜÛiÀÊÇxÊÞi>ÀÃ]Ê  "ʅ>ÃÊLՈÌÊ«œÀÌ>LiÊ `Àˆˆ˜}ÊÀˆ}ÃÊ>˜`ÊiµÕˆ«“i˜ÌÊ̅>ÌÊÃiÌÊ̅iÊÃÌ>˜`>À`Ê vœÀÊ`ÕÀ>LˆˆÌÞ]ÊÀiˆ>LˆˆÌÞ]Ê>˜`Ê«iÀvœÀ“>˜Vi°

SS-135

QuikDrill

Q *ÀœÛi˜Ê*/"Ê`iÈ}˜ QÊ QÊ n°x‡ˆ˜°ÊÀiÌÀ>VÌ>LiÊÀœÌ>ÀÞÊÌ>LiÊ QÊ £ä]™ä䇏L°ÊȘ}i‡ˆ˜iʫՏÊœ˜Ê `œÕLi‡`ÀՓÊ`À>ÜܜÀŽÃÊÜˆÌ…Ê Ã>˜`ˆ˜iʜ«Ìˆœ˜Ã QÊ ÊՏ̈«iʓÕ`Ê>˜`Ê>ˆÀʜ«Ìˆœ˜Ã

QÊ *œÜiÀi`ÊLÞÊ>Ê`iVŽÊi˜}ˆ˜iÊ ÜˆÌ…Ê*/"ʜ«Ìˆœ˜Ê>Û>ˆ>Li QÊ Ê/œ«…i>`ʜÀÊÌ>LiÊ`ÀˆÛiÊ QÊ ÊˆLÊLœœ“Ê܈̅ʣä]ää䇏L°Ê܈˜V…Ê QÊ Ê-ˆ˜}i‡Àœ`ʏœ>`iÀ]ÊÀœ`Ê눘˜iÀ QÊ ÊՏ̈«iʓÕ`Ê>˜`Ê>ˆÀʜ«Ìˆœ˜Ã

SS-135 QuikDrill

GEFCO (George E. Failing Company) is pleased to announce that they will soon be acquired by Astec Industries, Inc. GEFCO has been an industry leader in the manufacture of drilling equipment for over 80 years. During that span of time GEFCO’s primary focus has always been on our customers. This acquisition will allow us to build upon our long tradition of providing top quality equipment and our commitment to customer service. GEFCO will continue to operate out of their plant and headquarters in Enid, Oklahoma. For more information on GEFCO and Astec Industries, Inc. please visit www.gefco.com and www.astecindustries.com.

www.gefco.com xnä°ÓÎ{°{£{£ÊUÊ`œ“Ã>iÃJ}ivVœ°Vœ“

Card No. 20

www.NationalDriller.com | 35

2011

JUBILEE

Convention by Greg Ettling, editor

Charles Ray Clough (Double J Drilling of W. Va. Inc., Williamstown, W. Va.) stops by the Mobile Drill Intl. booth to see Jay Boland.

Making the rounds are Samuel and Kim Arrington (Arrington Well & Pump, Brevard, N.C.).

Betty and Samuel Ayers (Ayers Well Drilling, Callaway, Va.) visit with Franklin Electric’s Carl Wood.

R.H. and Ronnie Sapp (Ronnie Sapp Well Drilling, Glen St. Mary, Fla.) check in with Mark Laibe at the Versa-Drill exhibit.

t was a swan song of sorts in Myrtle Beach, S.C., as the South Atlantic Well Drillers JUBILEE is moving to Virginia Beach, Va., next year – and the year after. But regardless of the venue, JUBILEE is JUBILEE, and that means the industry gathers – with families on tow – to have fun and keep up with all the latest developments that can impact their businesses. The trade show, held July 30 – Aug. 1, once again offered a stellar lineup of educational programming. JUBILEE executive director Jane Cain says one of the goals for JUBILEE this year was to provide educational opportunities that people might not otherwise be able to access as easily. A prime example of that was the IGSHPA

I

36 | NATIONALDRILLER October 2011

(International Ground Source Heat Pump Association) training course, which was much-appreciated by attendees. Seminars covered a vast array of timely topics that touched on all aspects of the industry, including well construction, business management, safety, environmental issues and water quality. Cain adds, “Outdoor exhibits always are quite popular, and we had an extended session of outdoor activities this year.” The association’s board of directors put on what they called “Our Future’s Forum.” Explains Cain: “This was an opportunity for the younger generation to sit down with the veteran drillers and discuss how to make things more relevant to the younger generation, and what

Preparing for the future are Brandt and Tanner Herndon, representing the North Carolina Department of Environment and Natural Resources, Forest City, N.C.

Representing Timmons Well Drilling, Mullins, S.C., are Ana’Stashia Richardson, Ashlie Davis and Joleek Timmons.

they’d like to see from their state associations to advance the industry. It was very interesting.” On the trade show floor, it was the usual scene – drilling contractors and water professionals taking in the latest industry offerings and exchanging ideas, while the kids loaded up on all the swag they could carry (and for some, more than they could carry). And the exhibit hall action provided an encouraging sign during the current economic climate. “We were very pleased that our exhibitor numbers held up well,” notes Cain. “We actually had 11 new companies this year.” Whether on the trade show floor, in classrooms, at the social events or just out and about, you couldn’t go more

than a few minutes of conversation without the move to Virginia Beach coming up. Change sometimes can be a little daunting – but that’s OK; we’ve all been through it, and a bit of anxious adrenaline can be fun. “The move to Virginia Beach is very exciting – and on several different levels,” says Cain. “First of all, we’re going to be going into a state-of-the-art convention center with all the first-class amenities available. And it’s situated where it’s not far from any of the attractions and activities of the area. The beach is right there, top-notch golf courses are plentiful, and the boardwalk – three mile (Continued on Page 38)

SEMCO INC. P.O. Box 1216

•

7595 US HWY 50 North Lamar, CO 81052

719-336-9006 • Fax 719-336-2402 • E-mail [email protected] See us at our web page at www.SEMCOoflamar.com

Call our toll free number: 800-541-1562

Solansky Welding and Pump, Inc. 501 West Zavala Crystal City, TX 78839

S8,000H SEMCO Pump Hoist, PTO-Direct Mount Pump, Cathead w/ Valve, 2-Auxiliary Hydro Valves, 2-Pipe Racks w/ Straps, 15’ Steel Flat Bed, Factory Mounting w/ Hydraulic Oil, Mounted on Customers Ford Truck.

See Our Classified Ad on Page 75. Card No. 4

www.NationalDriller.com | 37

(JUBILEE - Continued from Page 36)

Taking five are the ladies from Bouknight Well Drilling, Gilbert, S.C.

Charles Nichols and Tommy Rodden of J. Darby Well Drilling, Rock Hill, S.C.

Flomatic Corp.’s Nick Farrara is flanked by Duke and Mike Swearingen (AAA Well Drilling Inc., Lexington, S.C.).

The good folks from Camp’s Well & Pump Co., Ellenboro, N.C.

These guys have drilled a few wells: David Robison (W.S. Gowan Well Drilling, Spartanburg, S.C.), Stephen McNeill (McNeill Well Drilling, Blytheville, S.C.), Worth Pickard (JUBILEE board emeritus) and Percy McNeill (JUBILEE board emeritus).

Chauncey Leggett (Lake Valley Well Co., Tarboro, N.C.) gets into one at the JUBILEE golf tournament.

Gerrett and Craig Hutson (Water Pro Pump Service Inc., Durham, N.C.) enjoy the moment after taking first place in the golf tournament. The De Angelis family (Connecticut Test Borings, Seymour, Conn.) heads into the exhibit hall.

The guys from Wayne’s Water N Wells Inc., Oakland, Md.: Jake, Kyler and Hunter Wilt. 38 | NATIONALDRILLER October 2011

ATS International Inc.’s Ted Dean presides over the “Basic Ground Water Geology” seminar program.

Nicholas and Jacob Dempsey (Dempsey Drilling, Cleveland, Tenn.) meet with Astec Underground’s Doug Zukowski.

CETCO’s Todd Tannehill enlightens conference attendees on “Essentials of Geothermal Grouting.”

long and beautifully appointed – is an award-winning, treasured hot spot for locals and tourists alike. There’s always something going on to enjoy, and it’s very family-friendly. Also, there’s a brand-new downtown Virginia Beach featuring many dining and shopping options. And nearby is a world-class aquarium, historic Williamsburg, a naval battleship museum, and an awardwinning amusement park – the scope of fun things to do and see is very wide.” So no excuses – in addition to the JUBILEE itself, there’s something for everyone in Virginia Beach. We hope to see you there July 21-23, 2012. ND

Card No. 39

www.NationalDriller.com | 39

JOHN SCHMITT, CWD/PPI

“Let Me Tell Ya”

Our Industry Loses a Valued Member Harry Brown, MGWC, 1933–2011 U.S. Army, stationed in Germany, and, upon returning, became associated with Brown Drilling Co., started by his father and uncle in 1927. Shortly after his return, he purchased Brown Drilling Co., operating since then from a Howell address. Under Harry’s leadership, Brown Drilling Co. became one of the larger drilling contractors in the state of Michigan. The company has drilled wells of all sizes and types – many domestic wells, a large number of commercial wells for motels and other establishments, and a number of really high-capacity industrial wells for irrigation, hospitals and municipalities. Harry had experience drilling almost every type of water well drilling method – jetting, hollow-rod, cable-tool, mud rotary, air rotary, casing hammer, down-the-hole hammer, auger and other methods. He had drilled wells from as small as 2 inches (yes, there still are quite a few 2-in.

he ground water industry lost one of its finest members with the death of Harry Brown, MGWC, at age 77 on Aug. 7, 2011. Harry had waged a courageous battle with cancer and other afflictions over the past few years. We understand that he passed on with his loving family nearby and in relative comfort. Harry Brown was born in Osceola Township, Mich., near the town of Howell on Dec. 21, 1933. He was the son of Ronald Brown and Helen BrowningBrown. Ronald Brown himself was a water well driller. Harry graduated from Hartland High School in 1952, and, in 1953, married Ingrid Hasenbusch, who was from Howell. Harry then served a two-year hitch in the Harry R. Brown.

T

40 | NATIONALDRILLER October 2011

Card No. 19

wells in Michigan, and they work very well) up to and including 24-inch wells. Brown Drilling also installs and repairs pumps of all types, from domestic jet pumps and submersibles up through large lineshaft-types used for irrigation and municipal water supply. The company also provides water-conditioning equipment, and has built a number of large pump houses for various uses. Perhaps the largest and most successful well Brown Drilling ever completed was done near Brighton, Mich., a few years ago; it was started with a 24-inch casing, and completed with 60 feet of screen in sand and gravel. This writer was privileged to see that well test-pumped, and it was being done at a rate of 6,000 gpm. This was an awesome sight, with two 14-inch discharge pipes from a large lineshaft-type pump driven by a Detroit Diesel. The twin 14-inch pipes were equipped with circular orifice plates, and the 10-inch to 12-inch streams of water exited six feet aboveground, and hit the ground some 60 feet away. After a successful test pumping, the hydrogeologist on the job determined (Continued on Page 42)

One number for #1 The only number you need for the number one supplier of all your drilling equipment needs With one call, you can get everything from a rotary box chain for a 1965 CME-55 to a pallet of granular bentonite. In addition to an extensive inventory of CME rig parts, Central Mine Equipment Company has virtually all the tooling and drilling supplies you need for the geotechnical, environmental, mineral exploration, water well drilling and construction industries. It’s not only easier than calling multiple sources, it also simplifies billing and accountability. You can get drilling tools; soil sampling equipment and supplies; conventional and wireline coring systems; impregnated, surface set and PDC diamond bits; mud, polymers and additives; drilling accessories and much more. All with just one call. And our inventory includes only the highest quality products at competitive pricing. Sometimes you may not be exactly sure what you need.

That’s where CME’s expertise comes in. When you need to know which core bit will last the longest in a certain formation, or which bentonite polymer mix to use for a specific job, CME can give you the answer. With over 75 years experience in the drilling equipment business, CME has a lot of free knowledge to pass along. Give us a call. Just one call.

Card No. 22

CENTRAL MINE EQUIPMENT COMPANY 4215 Rider Trail North, Earth City (St. Louis), Missouri, 63045 USA Phone: 314-291-7700 1-800-325-8827 FAX: 314-291-4880 E-mail: [email protected] Website: www.cmeco.com

www.NationalDriller.com | 41

(Schmitt - Continued from Page 40) that the well’s real capacity was more like 10,000 gpm, but the pumping was limited to 6,000, due to the pump capacity. Originally intended for a subdivision, this well was sold by the owner to the local township for a municipal supply. In the mid 1950s, Harry joined the then Michigan Well Drillers Association (MWDA), today known as the Michigan Ground Water Association (MGWA). He had remained a member to his death, and, in fact, was a lifetime member on that occasion. He served a couple stints on the MWDA board, including serving as board secretary and other offices. He was named Well Driller of the Year – the highest MWDA award – during the 1990s. He attended many, many MWDA/MGWA conventions, and enjoyed the educational seminars, business meetings and exhibits. He enjoyed visiting with other drillers and the exchange of ideas when these fellows got together. Shortly after joining the MWDA, Harry joined the then National Water Well Association, now known as the National Ground Water Association (NGWA). When this group introduced its driller certification, Harry became a master ground water contractor, and maintained that designation to his death. He was very proud of being a master ground water contrac-

tor, and attended a whole bunch of NGWA conventions, where he enjoyed the educational events, exhibits and exchange of ideas, just like he did at the Michigan shows. In the 1970s, Harry worked as a consultant in the United Arab Emirates, Yemen, Saudi Arabia and West African countries, including Upper Volta. He told this writer that operating a drilling project in Africa was “an interesting experience.” In addition to his drilling activities, Harry was a backpacker, camper, gentlemen farmer, sportsman, sports fan, gardener, hunter, fisherman and pilot. He especially loved Isle Royale National Park on Lake Superior, where there are absolutely no vehicles, and back- John Schmitt, Ingrid Brown and Harry Brown at the 1989 Rose Bowl game. packing by foot power is the only way to get around. He was a guest eral years, and his wife, Kimberly. doors on the shores of a pretty lake, of this writer at numerous University He also is survived by two beloved and Harry would have loved it, havof Michigan football games, and granddaughters, Emily Coghill of ing worked at that facility when he we, along with our wives, attended Grand Rapids, Mich., and Carolyn was a teenager. His daughter Linda the 1989 Rose Bowl game whereby, Coghill-Schyck and her husband Paul delivered a beautiful eulogy, and this miracles of miracles, Michigan beat of Manhattan, Kan.; as well as his writer added some short remarks USC 22-14. He was an experienced sister Dorothy Bourassa and brother about Harry’s life and career. As you probably have figured out traveler, and enjoyed several trips Richard Brown. Harry’s life was memorialized with by now, Harry was a close and dear to Germany, the birth country of his a visitation at MacDonald Funeral friend of this writer, and will be greatwife, Ingrid. In addition to Ingrid, Harry is sur- Home in Howell, Mich., on Aug. 14. ly missed. All his friends offer their vived by his daughters, Darlene His funeral, with a crowd of about 300 deepest sympathies to Ingrid and his Coghill and Linda Brown, and son present, was held at Waldenwoods other survivors. The world seems a Stanley Brown, who has managed near Hartland, Mich., on Monday, little colder place that he is no longer Brown Drilling Co. for the last sev- Aug. 15. This event took place out- walking in it with us. ND

Calling all Well Drillers and Contractors - Join Baker Water Systems at NGWA this year

where YOU could be the

WINNER

of

A 2010 Polaris Sportsman® 400 H.O.

The 2010 Polaris Sportsman® 400 H.O. returns to the full-size chassis, with improved ride and handling. It’s ideal for trail riding and hunting, and is a great Utility ATV. NGWA 2010 Winner: Danny Flynn of Flynn Well Drilling in Troy, MO!

Booth #319

To be eligible, all you need to do is bring an invoice showing the purchase of any of our products during 2011. Order from us all the time? For every $500 in purchases on the invoice you will receive an additional entry! Haven’t bought anything yet? Visit your local distributor and buy now, all invoices dated Sept. 1 - Nov. 18 will receive DOUBLE ENTRIES!

It’s our way of saying THANK YOU for your continued business! Not attending the show? To enter, send invoice(s) to: Jennifer Becker, Marketing Manager fax: 608-882-6776 e-mail: [email protected] or snail mail:133 Enterprise St. Evansville, WI 53536 Sent entries must be received by 11/18/2011 to be eligible

Disclaimer: Winners will be drawn randomly during the show at the Baker Water Systems Booth #319; with the grand prize ATV to be drawn at 11:30 a.m. on Thursday December 1, 2011. Need not be present to win. Item will be shipped to winner at Baker’s expense within the continental US. Winner will be responsible for all taxes and registration fees and will receive a 1099 for the value of the prize package. Distributors, representatives, and employees of Baker Manufacturing Company are not eligible for this promotion.

42 | NATIONALDRILLER October 2011

Card No. 11

SMALLER BIT.

SMALLER HAMMER.

BIGGER IMPACT .

ROCK XTREME TM

Who says the next big thing in drilling can’t be small? Center Rock’s new Rock Xtreme™ RX60 and RX65 bits and hammers deliver undisputable performance ANDÏPROlTABILITYÏINÏEVENÏTHEÏMOSTÏCHALLENGINGÏOPERATINGÏCONDITIONS /URÏNEWÏBITSÏnÏWITHÏÏMOREÏACTUALÏSPLINEÏAREAÏANDÏNOÏEXHAUSTÏTUBEÏnÏWEIGHÏUPÏTOÏÏLESSÏVERSUSÏ COMPETITIVEÏOFFERINGSÏ4HATÏMEANSÏOPTIMUMÏECONOMY ÏRELIABILITY ÏANDÏDURABILITYÏANDÏFARÏLESSÏRIGÏVIBRATIONÏ DURINGÏDRILLING ÏDRASTICALLYÏREDUCINGÏYOURÏDOWNTIMEÏLABORÏANDÏREPLACEMENT PARTÏCOSTS


Our technology optimizes your impact. 0HONEÏÏÏÏÏÏÏÏ4OLLÏ&REEÏÏÏÏÏÏÏÏ#%.4%22/#+#/Card No. 12

Drill faster. Run harder. Work smarter.

Ten Ways to Cut Fuel Costs by Jack Lee

emember the good old days – when prices at the pumps were semi-reasonable – and they stayed that way. Well, the good old days are gone forever, and today we live in a world where fuel prices seem to go up by the hour. Now pundits speculate on living with oil prices running up to $200 per barrel. As consumers, many of us have adjusted our lifestyles. We try to drive less. Some choose to car pool, while others get rid of their gas-guzzlers and opt for more fuel-efficient vehicles, including hybrids. For companies, the good old days meant fuel up and go. Little attention was paid to managing fuel. But in the past year, the price of oil has been cutting deeper than ever into profits, causing owners and managers to adopt a new fuel consciousness. Fuel management is a necessity. You can’t control the price of fuel, but you can control your fuel consumption. The answer is fuel management. Any company can improve their fuel efficiencies. It takes work and commitment from the head office to your people on the road and at the job sites. More and more companies are making changes in their operating practices to cut costs now and to be

R

44 | NATIONALDRILLER October 2011

prepared for even higher costs in the future. To help you adjust, here are 10 ways to cut fuel costs: 1. Train and educate your drivers. It starts with the people who have their feet on the gas pedal. Your drivers can control fuel consumption each time they fire up their engines, and proper training can improve fuel efficiency, economy and emissions. Hard acceleration, speeding and idling are the biggest causes of fuel waste. Initiate a training course for drivers, and reward participation. 2. Decrease idling. Be aware of the time engines idle. No longer can we leave machinery and equipment running all day long. Stop your engines! Excessive idling adds to your fuel costs by as much as 50 percent, and can shorten the life of engine oil by 75 percent, adding more costs. Initiate a campaign to reduce idling time and reward participants. Allowing an engine to idle more than three minutes causes expensive damage, which harms efficiency, shortens engine life and increases maintenance costs. It all adds up. 3. Start off slower. This is another lesson your drivers must be taught. Jackrabbit starts waste fuel and save less than 3 minutes per hour driving, but can result in using 40 percent more fuel and increasing toxic

emissions by 400 percent. What’s the rush? Ease up on the gas pedal, and your efficiencies will improve. 4. Slow down. Speeding is dangerous, it wastes fuel, and it creates higher levels of toxic emissions. Speeds over 65 mph drastically impact fuel efficiencies – cars traveling at 75 mph use 20 percent more fuel. Trucks traveling at 75 mph use 50 percent more fuel, and they also emit 100 percent more carbon monoxide, 50 percent more hydrocarbons and 31 percent more nitrogen oxides. 5. Lose weight. Excess weight places unnecessary strain on your vehicle’s engine, and greatly affects its fuel efficiency. By removing as little as 100 pounds, you can significantly improve your gas mileage. Check each vehicle and pitch out that unnecessary weight. 6. Use a fuel management system. This is the most powerful way to lower fuel costs and increase productivity. Available systems range from basic on-site refueling (which saves up to 20 minutes in wasted time and fuel each day, per vehicle) to automated fuel tracking (which details every gallon pumped into every vehicle by date, time, quantity and fuel type) to telematics (Continued on Next Page)

(Fuel - Continued) (which measures overall fuel efficiency, vehicle performance, tracks fuel waste due to idling, speeding, etc., and identifies critical areas to improve efficiency and reduce fuel costs and emissions). The technology exists so you can become a fuel manager and stay on top of your fuel consumption, one vehicle at a time. It can work for you. 7. Upgrade your fleet. Whenever possible, invest in modern, fuel-efficient vehicles. Modern diesel engines are far more fuel-efficient and perform better with modern diesel fuels such as ultra-low sulphur diesel and biodiesel. Though it may seem expensive, new diesel vehicles can save thousands of dollars in maintenance, fuel and productivity per vehicle. Measure each piece of equipment for fuel efficiency, and get rid of the bad ones. Replace and upgrade your equipment regularly. It may hurt now, but it will pay you back. 8. Tune-up vehicles regularly. Do you have a stringent, well-managed maintenance policy? Many companies have a fix-it-when-it-breaks mindset. This attitude costs too much in wasted fuel. A well-maintained vehicle performs better, improves fuel efficiency, reduces toxic emissions and, in the long run, will cost less to maintain. 9. Pump it up. Proper tire inflation improves gas mileage. Our statistics show improperly inflated tires can cost up to two weeks worth of fuel per year. How

big is your fleet? Two weeks per year per vehicle can add up to thousands of dollars in lost profits. In addition, proper inflation results in improved vehicle and braking performance, and increases tire life. 10. Implement advanced mobile asset management technology. Wow, that’s a mouthful. You can measure and manage your fleet better when you have the right information. Tracking miles

traveled, average speed and engine efficiency is critical to cutting fuel costs. This information will help your drivers and managers optimize routes with better planning. Mapping software and GPS can eliminate a lot of unnecessary miles. Less time on the road means less fuel consumed, less wear on vehicles, decreased expenditures and overall increased productivity – plus lower toxic emissions.

Once you have made a total commitment to managing your fuel better and changing some of your bad fuel habits, results will follow. Stick with it. Fuel prices are only going up. ND Jack Lee is the president and CEO of 4Refuel Canada Inc., a leader in fuel management systems; you can reach him at 604-513-0386 or [email protected].

WHEN YOU REACH THE END OF THE ROAD ---LET SHALLOW DRAFT BE YOUR HIGHWAY ABOVE THE WATER!

HIGHWAY TRANSPORTABLE

FOR DRILLING RIGS

SELF PROPELLED

GEOTECHNICAL WORK

2ft - 45ft OF WATER

ENVIRONMENTAL WORK

DELIVERED ANYWHERE

SAFE & EASY

WWW.SHALLOWDRAFT.COM (504) 682-2100

IF YOU NEED ACCURATE SAMPLES, CALL:

CONTACT JIM DIFATTA - SALES & LEASING

Card No. 16

TH60

Better Than Ever

SERVICE SALES PARTS

“Better” means more options. Quieter operation. Compliant with the new EPA regulations. The new Atlas Copco TH60 Waterwell Rig ships with a Tier 4a engine. And 600 hp means that you aren’t compromising on power. Venture Drilling Supply not only sells the TH60, it provides 24x365 factorycertified service technicians. www.venturedrillingsupply.com www.usedrigs.com Oklahoma: 918-456-8284/888-45DRILL Texas: 512-869-2974/888-55DRILL Also serving KS, MO, and AR NOW WITH A SERVICE CENTER IN ODESSA, TX TO SERVE YOU BETTER!

Card No. 67

www.NationalDriller.com | 45

4-7

5-6

O CTOBER The New MODFLOW Course:

585-746-8055 www.nywelldriller.org

Theory and Hands-on Applications Princeton, N.J. 800-551-7379 www.ngwa.org

7-8

IGSHPA Technical Conference & Expo Tulsa, Okla. 800-626-4747 www.igshpa.okstate.edu

13-15

Oregon Ground Water Association Convention Warm Springs, Ore. 503-390-7080 www.ogwa.org

Association Fall Meeting Columbia, S.C. 803-356-6809 www.scgwa.org 23-25

Washington State Groundwater Association Convention Everett, Wash. 360-757-1551 www.wsgwa.org 1-2

5-7

National Drilling Association Convention Seven Springs, Pa. 877-632-4748 www.nda4u.com

5-7

WaterSmart Innovations 17-18 Conference & Expo Las Vegas www.watersmartinnovations.com

5-8

7

9th International Hydrogeological Congress Kalavrita, Greece www.hydrogeocongress.gr

17-18

18-21

Empire State Water Well Drillers Association Fall Meeting Mount Morris, N.Y. 21

46 | NATIONALDRILLER October 2011

DFI Conference on Deep Foundations Boston 973-423-4030 www.dfi.org South Carolina Groundwater

Card No. 75

N OVEMBER Monitored Natural Attenuation: Mechanisms, Site Characterization, Evaluation, And Monitoring (short course) Newark, N.J. 800-551-7379 www.ngwa.org

Applications of Groundwater Geochemistry Nashville, Tenn. 800-551-7379 www.ngwa.org Site Characterization in Support Of Fractured Rock (short course) Denver 800-551-7379 www.ngwa.org

Georgia Rural Water Association Fall Training Conference Helen, Ga. www.grwa.org 770-358-0221

3-4

International Symposium on Deep Foundations Mexico City, Mexico 973-423-4030 www.dfi.org

3-5

California Ground Water Association Convention & Trade Show Reno, Nev. 707-578-4408 www.groundh2o.org

[email protected]

HOWARD “PORKY” CUTTER, MGWC

or years, when Bess said something to me, I almost always would ask, “What?” which didn’t bother me, but I know it aggravated Bess. Many times, she just thought that I wasn’t paying attention. That wasn’t always true. We all knew that Bess has hyper-hearing because she always would have the TV volume so low that we couldn’t hear what was being said. Everyone also knew that she had sensitive hearing because you could whisper something in the next room or upstairs, and she would hear every word. The boys and I couldn’t have any secrets; we couldn’t get by with anything. The boys said that mom knew what they were thinking before they had even thought of it. I decided that I would prove I didn’t have a hearing problem, so I went to a hearing specialist. The team there gave me a complete hearing test, and lo and behold, I didn’t hear high frequencies in my left ear. It was like hearing in mono instead of stereo. They said that they could set me up with a set of hearing aids, but that I needed to bring Bess in with me. Yeah, right! A sales tool; you can’t sell anything without the wife’s OK. I returned with Bess, and they proceeded to fix me up with a set of hearing aids. Without the hearing aids and me not facing Bess, they had Bess repeat certain words and sentences. Then I was asked to repeat what I heard. What I heard wasn’t what she said. Then they gave me a set of hearing aids, and, with a computer, adjusted them to my hearing needs. Then the team repeated the same test again. They had me to face away from Bess, and had her to say certain words and sentences. Then I was asked to repeat what I heard. I could repeat every word and sentence. Then they took her into another room around the corner some 30 feet away. Again, she said specific words and sentences, and I heard and repeated everything word-for-word. Now we’re talking! What will the hearing aids cost? The specialist said that the set would be $7,500. I couldn’t hear again. How about $4,500? I still couldn’t hear. Well, then the specialist said, “We can supply you a rebuilt set for $2,500.” Now I’m beginning to hear again. Well, I walked out with a new rebuilt set of hearing aids, but much lighter in the pocketbook. Getting in the car, I could hear, and remembered that keys jingle and signal lights have a clicking sound when engaged. More importantly, I could hear Bess without her having to repeat everything. Bess is happy, and I’m broker, but I can hear. We got home, turned on the television, and what the heck, I couldn’t hear it. It’s Bess’ @#$%^&* hyper-

Porky’s Hole Thoughts

Porky’s Hearing Aids hearing. The TV’s turned down to where even with my $2,500 hearing aids, I still can’t hear. Oh well, thank God for the closed captions on the television. Now, when Bess asks me to bring something home from town, I usually bring home the right thing – or close enough to it. Honestly, those who think they hear OK may not. Get your hearing tested. It doesn’t cost much, if anything. The cost comes when you need to purchase hearing aids. But if you find that you need them, get ’em. You, your family and your friends all will be much happier, I promise. ND

F

Hearing aids. Photo courtesy of Kurt Nordstrom.

884,000,000

Reasons.

1 Drilling Solution.

There are a lot of reasons you’ve made village well drilling a priority. 884,000,000 to be exact.

The number of people who go without clean drinking water each day is staggering. But the solution is simple. From the shipping crate to the drill pipe, Lone Star drills are designed and packaged exclusively for shallow well drilling in areas with minimal resources for transportation and operation. Rugged steel frames paired with robust winches and hydraulics provide years of worry-free drilling power in the most demanding drilling environments.

For more on our drilling solutions and training programs visit lonestardrills.com.

A product of: Little Beaver, Inc. ‡ 800.227.7515 Card No. 6

www.NationalDriller.com | 47

Geothermal Project Profile Advertorial

A revolutionary approach to ground source heat pump installations by Randy Happel

M

ore than two centuries ago, during Pennsylvania’s cold winter months, smoke would billow from the twin chimneys of the quaint York County Courthouse, a sign that the delegates of the Second Continental Congress had gathered, huddled next to the inefficient crackling fires of two wood-burning fireplaces that mirrored each other inside the chamber. The original structure was demolished in 1841, leaving Continental Square – the site where the famed courthouse stood for nearly a century – with a huge void.

lowed us to easily reposition the drill, providing a great deal of flexibility – a something that is very important when dealing with confined spaces.”

Rock ’n Drill Having drilled in this area on several previous occasions, Kling was familiar with the rock-laden conditions, and also anticipated having to control some ground water infiltration in the boreholes, especially since the site was located within 100 feet of Codorus Creek. He was surprised, even delighted, that ground water infiltration didn’t occur until reaching a depth of about 140 feet. For tooling, Kling selected a 4-inch air hammer, and alternated between a 47⁄8-inch- and 5-inch- diameter bit. “With the D20x22FX flex angle drill, we definitely have the right tool for geothermal installations,” Kling says. “This machine has opened up the prospects for a whole lot more people to be able to install geothermal ground source heat pump systems

In 1976, the locals rebuilt a replica. However, after 35 years, the time had come to replace the aged and inefficient system that heats and cools Colonial Courthouse. So the York Country Heritage Trust met to discuss options. According to Susan Smith, the Heritage Trust’s chief financial officer, the decision to invest in geothermal made the most sense. “The geothermal system cost more initially,” Smith from the ground is extracted and transferred back to the building. It’s an extremely efficient and cost-effective system.” R. R. Kling & Sons began installing horizontal-loop geothermal systems in 2007 after encountering challenges with some vertical installations that required big truck-mounted, well-drilling rigs and confined drilling spaces. That’s when Kling caught wind of a new type of drill offered by Vermeer Corp. “We researched the new D20x22FX flex angle drill that Vermeer had just come out with, and went to see a demonstration,” Kling recalls. “After seeing the drill in action, especially in light of the soil formations prevalent in our area, we decided the flex angle drill was the solution we were looking for.”

Tread Lightly on Historic Ground

says, “but after crunching the payback numbers, we estimate going with a geothermal system will save several thousand dollars each year in utility bills. We will recoup the additional upfront expense within seven years, and continue the savings for many years beyond that.” After completing its geothermal ground source heat pump research, the Heritage Trust put its faith in Mt. Wolf, Pa., contractor R. R. Kling & Sons. Scott Kling, general manager, explains how the new geothermal system works. “The Colonial Courthouse’s geothermal system has loops running through the ground that take heat out of the building in the summer and push it into the ground,” Kling explains. “Conversely, during winter months, heat

The York Colonial Courthouse replica is flanked by the scenic banks of Codorus Creek and Heritage Trail. Several overhanging trees dot the landscape of the property that also is enclosed by a split rail fence. Given the proximity of the rail trail and the structure’s historic significance, there also is a lot of foot traffic. These factors combined made limiting the footprint of this hallowed site all the more important. The geothermal system designed for the courthouse is composed of 1,500 feet of vertical loops that tie together and connect to an existing supply and return line. Due to space confinements of the jobsite, Kling decided to install 10 vertical lines at approximately 150 feet deep in two rows composed of five bores each. Each loop was bored at a particular angle to maximize footage in the ground and maintain the 15-foot separation between the loops at a depth of 20 feet. “The flex angle drill allowed us to change the angle of the bore and more effectively use the confined space that was available for the loop field,” says Kling. “The counter-rotating tracks on the D20x22FX drill also al-

for their homes, especially in tight spaces where it wouldn’t have been possible to get into with other equipment.” As for the Heritage Trust and the new heating/cooling system R. R. Kling & Sons was able to install on its prized, historic site with minimal disruption, Smith is elated. “I’m sure the 56 members of the Continental Congress would consider the installation of our new geothermal system somewhat revolutionary in its own right,” Smith says. “The juxtaposition of the old vs. new … it’s all very interesting.” Randy Happel is a features writer for Two Rivers Marketing.

A LEADER IN HORIZONTAL, NOW AVAILABLE IN VERTICAL — AND EVERY ANGLE IN BETWEEN. Introducing the D20x22FX Series II Navigator® flex-angle drill from Vermeer — the first drill capable of entry points everywhere between 18 and 90 degrees. It’s both a vertical and horizontal drill in one package, giving you more versatility to take on a wider range of projects. As with all Vermeer products, we back the D20x22FX Series II drill with local service and support. Visit Vermeer.com to find your local Vermeer dealer.

VERMEER.COM

Vermeer, the Vermeer logo, and Navigator are trademarks of Vermeer Manufacturing Company in the U.S. and / or other countries. © 2011 Vermeer Corporation. All Rights Reserved.

Card No. 72

www.NationalDriller.com | 49

Geothermal Project Profile Advertorial

S

chramm Inc., the leading manufacturer and global supplier of land-based, mobile hydraulic drills, is proud to announce the launch of its Casing Rotator, combined with the T450GT Track Rig, for geothermal and water well drilling applications.

In efforts to continue leading the way with intelligent, real-world advancements in drilling technology, Schramm designed and implemented the new Casing Rotator, combined with the T450GT Track Rig. The Schramm T450GT Track Rig is a compact, 30,000-pound hoist, highly maneuverable track-mounted drill rig with

a large-volume, high-pressure air compressor. The deckmounted diesel engine provides reliable power for all hydraulic air systems, while the rugged top-head-drive rotation and efficient pipe-handling provide high productivity on the job site. With the T450GT Track Rig and Casing Rotator combination, casing and drill pipe are drilled simultaneously, presenting less footprint and equipment on-site, and lowering operating costs. This optional Casing Rotator device features a rotary top-head and rotary table fixed to a sliding-mast feed system. Utilizing the tilting top-head function, the casing is loaded into a rotary table. In conjunction with a sliding mast, the rotary table advances 6- and 8-inch steel casing through unconsolidated overburden earth formations, including heaving sands, gravel and glacial till. Cuttings are routed through a discharge swivel, and sent to a cyclone to control placement of the drilled material. Upon completion of casing placement, drilling continues without any interruption until reaching target depth. For more than a century, Schramm has specialized in providing the highest-quality mobile, top-head hydraulic rotary drilling rigs in various sectors worldwide. With new technologies such as the Casing Rotator option, Schramm continues to provide a safer, more productive drilling experience to customers around the world. For more information, visit www.schramminc.com, or email [email protected].

Card No. 5

Geothermal Project Profile Advertorial

M

ills Machine Co. (est. 1908) is dedicated to manufacturing quality earth drilling products worldwide for any type of drilling, and is known for its innovative product designs. It also has the unique ability to take ideas from one or more industries and modify them to offer new and innovative drilling products to other industries.

Geothermal drilling has exploded across the country, and the demand for tools designed to address the specific needs has exploded right along with it. Contractors across the country have learned that throwing the same old bit at every application yields the same old results. Mills Machine Co., in Shawnee, Okla., took a different approach. For starters, the company listened to what the drillers were saying, and developed a tool to suit their requirements. The Mills GEOCLAW Bit fills the niche for smaller-size bullet bits. Their construction is more versatile, and their performance is superior to the smaller bullet bits previously available. Mills GEOCLAW Bits are available in a heavy-duty crossed-bit construction and a standard pilot bit form. These unique bits fill an important need in the drilling industry. All of Mills’ Claw Bit designs offer rapid penetration, drilling time as fast as – or faster than – that of a drag bit, and are as tough as a roller rock bit. They feature economical, inexpensive field-replaceable cutters. The conical bullet-shaped cutters rotate in

their blocks to provide a self-sharpening effect, extending the life of the bit and reducing torque. The overall result is speed, durability and inexpensive maintenance. Making hole is the name of the game, and that is what these bits do. Sometimes even the same old rotary drilling method won’t work! In certain parts of the country, soil conditions are such that the instability of the soil prevents the installation of the “loops.” The hole just won’t stay open

ong enough, deep enough to facilitate completion. To that end, some contractors are turning to the oldest drilling method known to man – the auger; in this case, the hollow-stem auger. In certain soil conditions where shallow (200-ft.) wells are appropriate, some have successfully utilized 21⁄4-inch hollow-stem augers strings to get the job done. The 21⁄4-inch internal diameter center tube can accommodate the loop, and functions as a temporary casing while it is installed, and leaves a very manageable 61⁄2-inch hole to deal with. The challenge, it turns out, is finding a string of 21⁄4-inch augers strong enough to handle the rigors and depth of such a well. Common 21⁄4-inch hollowstem augers use 1⁄4-inch-thick flighting to convey the cuttings, and support the body of the auger. Mills Machine Co., steeped in experience from the oilfields of Oklahoma and Texas, learned along time ago that, when it comes to steel and drill tooling, less is not more. Its 3⁄8-inch flighting is substantially more robust, enabling more confident drilling and greater depths. The company also offers a complete selection of auger cutter heads to help “dial-in” efficiency. Mills Machine products are proudly made in the U.S.A.

Custom Stabilizers

Keep it Straight! Keep your hole straight with a Custom Stabilizer from the down hole experts. Mills Machine Company has been manufacturing in line and bottom hole stabilizers for over 40 years and offer a multitude of styles and combinations! t

4NPPUI t

'MPX
UISPVHI t

4USBJHIU
3JCCFE

t

4QJSBM
3JCCFE t

0WFS
)BNNFS t

4QJSBM4USBJHIU
3JCCFE
$PNCP

Options include any outside or inside diameter, length or thread configuration with breakout flats or lugs, float valve bore or cast carbide ribs. Stabilizers are made to exacting standards with the highest quality alloy steel and tungsten carbide coating where Applicable.

100

GO DIRECT ONLINE!

SINCE 1908

*(7$)5(( 0,//67+5($'58/(5

800-654-2703 00-654-2703

405-273-4900 405-273-4900

Custom Earth Drilling Tools and Bits S I N C E

1 9 0 8

6HHPRUHRIWKHVHSURGXFWVRQOLQH

HOLEOPENERS

DRAG BITS

HOIST PLUGS

),6+,1*722/6

EARTH AUGERS

SUBS

UNDERREAMERS

CLAW BITS

32%R[6KDZQHH2.‡)D[‡VDOHV#PLOOVPDFKLQHFRP Card No. 10

www.NationalDriller.com | 53

Geothermal Project Profile Advertorial

Kickapoo Drilling installs loops at the Lincoln Tomb

W

e certainly hear a lot about geothermal systems being installed in new construction projects – both commercial/industrial and residential. But geothermal also can prove to be quite appropriate for historical construction as well, as is the case with the Lincoln Tomb in Springfield, Ill. An efficient environmental-control system is important, as it will serve to protect the historic interior and all its furnishings. Another bonus with the new geothermal system is the removal of a rather unattractive airconditioning unit in an otherwise pristine setting.

Drilling operations for the project were handled by Kickapoo Drilling Co., Downs, Ill. Says Kickapoo president Jim Layten, “We took care of all the outside work for this particular project – the water supplies, the irrigations systems that had to be changed out and the 24 boreholes for the loops.” Using a 2006 Versa-Drill rig, Layten’s crew drove 5-inch boreholes for the 1-inch loops; the boreholes went down to 220 feet, and had 1.2 grout in them. Asked about the drilling conditions encountered, Layten explains, “It was mostly all shale, with a few streaks of limestone and a few streaks of coal. We didn’t anticipate some of the hard spots, and didn’t have the proper bits on-site at first. After first using drag bits, we got some PDC bits in there, and they went right on through. Overall, it was pretty straight-forward.” The job site itself, however, did pose a couple unique challenges. One was making sure to keep the site as clean as possible because of its stature as a national historical site – it’s the second-most-visited cemetery in the country. Layten tells of another: “We didn’t think

much of it at the time when we were asked to respect the funeral processions and such. We figured, no big deal; we’ll go ahead and just shut down for a brief period of time. We soon found out that there were two and three processions a day coming through, and that became somewhat of an issue for us at the beginning. But the cemetery staff worked with us and got the processions moved to an alternate route, so we didn’t have to shut down all the time.” And the horizontal drillers – Kickapoo subbed out that part of the operation – had a little difficulty getting into the tomb. “It was built in 1870s, and the drawings weren’t that great,” Layten explains. “There was some trouble getting under and around the footings – there were double-wall footings – so it was a challenge to get into the center of the tomb.” The job was completed in two weeks. “I was reminded that we were drilling there on Election Day for a project honoring our 16th president,” Layten relates. Kickapoo is on its third generation. Layten recounts: “My father started drilling in 1937. He did have to take a little bit of time off to deal with World War II. When he got back, he went out and bought a cable-tool rig to use. In 1963, we went into a partnership with a guy fairly close to here who had a rotary rig – that’s how we got into the rotary drilling business. In 1967, we bought out the partner, and it’s been us ever since. My son, Mark, and my daughter, Sarah, both work with me now, so I’m starting to look at going fishing more often. My son is doing most of the managing of the drill rigs on the water well side, and I’m kind of expanding into the geothermal side, which is growing rapidly. We started into it in 2002, but didn’t do too much of it until about three years ago. We got into the commercial side, and went after some of these larger jobs. We’re probably not quite 50 percent on the geo side, but it’s growing rapidly.” The company runs four rigs – two Failing cable-drive rigs that do most of the water well work, and two VersaDrill rigs that concentrate on geothermal. Kickapoo typically employs 15 people, and besides drilling, also does complete water systems. “We’re trying to get more service crews up and running on our water well side,” says Layten. “The rural water district systems are on their way, but they’re not here yet. What’s happening is the water well industry is getting older and older, and there aren’t many people coming in behind the companies that are going out of business, so our territory is expanding a little bit in that area.” Layten looked into geotechnical work back in the 1980s, but says, “The equipment we had just didn’t fit. With the geothermal work, most of your equipment does transfer over. You find that you do need a lot more specialized equipment, and there is a bit of a learning curve, but it’s easy enough to make the transition.” Like making the transition from worms and minnows to spinnerbaits and spoons.

VISIT WWW.LAIBECORP.COM FOR AVAILABLE NEW AND PRE-OWNED RIGS, BROCHURES AND SPECIFICATIONS

VERSA DRILL MODEL LINE-UP ®

300’ OF AUTOMATED ROD HANDLING AVAILABLE

500’ OF AUTOMATED ROD HANDLING AVAILABLE

500’ OF AUTOMATED ROD HANDLING AVAILABLE

VERSA DRILL V-50GTRX

VERSA DRILL V-100NG

VERSA DRILL V-1040DP

®

®

500’ OF AUTOMATED ROD HANDLING AVAILABLE

VERSA DRILL V-1040TRX ®

®

ROD HANDLING STANDARD!

VERSA DRILL V-1555 ®

VERSA DRILL V-2000NG ®

ROD HANDLING STANDARD!

VERSA DRILL V-2000ADP ®

VERSA DRILL V-2095EXP ®

VERSA DRILL VERSA SONIC ®

*ALL MODELS AVAILABLE ON CHASSIS APPROVED FOR AUSTRALIAN LOAD SHARE *ALL MODELS SHOWN WITH ALL OPTIONS

POWER THROUGH TECHNOLOGY BUY DIRECTLY FROM THE MANUFACTURER

Established 1962

TOLL FREE (800) 942-3388 - WWW.LAIBECORP.COM 1414 Bates Street - Indianapolis, IN 46201 U.S.A. - Telephone: (317) 231-2250 - Fax: (317) 266-8426 Card No. 55

Baker Water Systems - Monoflex manufactures quality groundwater monitoring products. Key products include Well Screens & Casing; Perforated Well Screen, Custom Slotted Well Screen, Centralizers, and a complete line of PVC Fittings and Well Accessories. Applications include: Water Wells up to 24”, Irrigation and Environmental Testing and Monitoring.

Open-frame Air Compressor œœÃ>˜Ê*œÀÌ>LiÊ*œÜiÀʈ˜ÌÀœ`ÕViÃÊ̅iʘiÜÊ88*£ÓÇäÉ 8*£xää
/Ê œ«i˜‡vÀ>“iÊ >ˆÀÊ Vœ“«ÀiÃÜÀÊ vœÀÊ ÕÃiÊ ˆ˜Ê environments where a small footprint is crucial, such as quarry and coal bed methane drilling, nitrogen generation, offshore drilling or industry in general. /…iÊ 88*£ÓÇäÉ8*£xää
/Ê `iˆÛiÀÃÊ £]xääÊ Vv“Ê œvÊ free air at 350 psi, and 1,270 cfm at 500 psi. For more information visit www.DoosanPortablePower.com or call (800) 633-5206. Doosan Portable Power.

Visit us at www.campbellmfg.com/monoflex or call 800-523-0224 for more information.

Schramm T450GT Casing Rotator Option The New Schramm T450GT Track Rig and Casing Rotator combination allows casing and drill pipe to be drilled simultaneously, presenting less footprint and equipment on site and lowering operating costs. With new technologies such as the Casing Rotator option, Schramm continues to provide a safer, more productive drilling experience to customers worldwide. For more information, please visit us at www.schramminc.com. Schramm, Inc.

CARD #108

UÊ ,Ê­ i˜ÌiÀÊ,œVŽ®>““iÀÃÊvÀœ“Êx»ÊÌœÊ£Ó»Ê‡Ê economical and reliable UÊ,Ê­,œVŽÊœÀVi®Ê>““iÀÃÊvÀœ“Ê{»Ê̜ÊÓä»Ê‡Ê high performance with competitive pricing UÊ,8Ê­,œVŽÊ8ÌÀi“i®Ê>““iÀÃʈ˜Ê>ÊÈ»Ê >ÃÃÊ‡Ê cutting edge performance and economical bits using tube-free technology Call Toll Free (888) 267-9004 for more information. Center Rock Inc.

Baker Water Systems.

CARD #101

Center Rock Inc.’s DTH Hammers “Our Technology Optimizes YOUR Impact”

CARD #104

CP3R VFD Control Panel The CP3R VFD control panel is designed for simplex constant pressure applications up to 5HP. It is equipped with one Variable Frequency Drive (VFD) in a ventilated NEMA 3R rated enclosure suitable for outdoor operation and includes a 0-100 PSI pressure transmitter. Each is factory-tested and pre-programmed for your application, which makes installation and startup simple and quick. UL/cUL Listed. For our complete offering of VFD controls, visit www.vfdpanels.com. SJE-Rhombus 22650 County Highway 6 - PO Box 1708 Detroit Lakes, MN 56502 USA Toll Free: 1-888-DIAL-SJE (342-5753) Phone: 218-847-1317 Fax: 218-847-4617 Email: [email protected] Web: www.sjerhombus.com

CARD #102

“Now manufactured by Acker under license from Pitcher Drilling Company, Inc. The PITCHER SAMPLER is designed to recover accurate samples from formations that are too hard for thin-wall shelby samplers or too brittle, soft or water-sensitive to permit satisfactory recovery by conventional core barrel type samplers. Several years of successful application in virtually every type of “problem” formation proves that PITCHER SAMPLER saves time, money, and insures exceptional accuracy. Now uses standard 3x36” shelby tube as well as a NWJ connection. Call Acker today at (800) 752-2537 to find out more!” Acker Drill Company.

CARD #109

CARD #100

The Heron dipper-T water level indicator. The best selling dipper-T water level indicator includes the easy read yellow tensile steel tape jacketed in polyethylene, the Heron Carry Case and fully pressure rated easy clean Enviro probe. Make the move to the Heron dipper-T water level indicator today. Call for special National Driller readers rates.

Merrill Manufacturing.

The self-sanitizing Sanitizer Plus Series water conditioners, new from Water-Right Inc., now have operating and programming intelligence to optimize removal of iron and sulfur bacteria that clog pipes and stain plumbing fixtures. A microprocessor-based, solid-state control captures operating history while enhancing control over all system functions. Systems are available with a choice of several electronic controls. A full-function digital screen displays water usage data and system history, and programming data when customizing system cycles. 800-777-1426. Water-Right Inc.

CARD #113

CARD #111

CARD #106

Brass Tank Tees with Special Connections Merrill Manufacturing would like to introduce the (QC) Quick Connect and (UN) Any Tank Union product line. These (QC) brass tank tees come with the quick connect compatible with Wellmate tank models. Our other new (UN) tank tees are the Any Tank Union models. The Any Tank Union nuts have NPT thread to connect with any pipe and O-Ring to seal against end of pipe threaded into union nut. For more information contact your distributor, Merrill at 800-831-6962, or log onto www.merrillmfg.com.

56 | NATIONALDRILLER October 2011

Heron Instruments

800-331-2032 www.heroninstruments.com

Wyo-Ben’s broad base of experience has resulted in the development of drilling fluid additives that lead the industry for their ability to solve problems fast in difficult situations with less investment than any other products on the market. The dedication to product innovation results in offering you the opportunity to select from a wide range of products specific to your application. This means using fewer products and less of each product for more productivity and profitability. Wyo-Ben Inc., P.O. Box 1979, Billings, MT 59102, (406) 652-6351, fax (406) 656-0748, [email protected]

COTEY WELL CLEANING BRUSH! UÊ/…ˆÃÊ՘ˆµÕiÊLÀÕÅʈÃÊ`iÈ}˜i`Ê̜ÊLiÊÕÃi`ÊÜˆÌ…Ê œÌiÞÊ

…i“ˆV>½ÃÊÜiÊVi>˜ˆ˜}Ê«Àœ`ÕVÌðÊUÊÃÊ>˜Ê>Ê«ÕÀ«œÃiÊ LÀÕÅÊvœÀÊÕÃiʈ˜Ê>ÊÌÞ«iÃʜvÊV>Ș}Ê>˜`ÊÃVÀii˜°ÊUÊ >˜Ê LiÊÕÃi`ʜ˜Ê>ÊV>LiʜÀÊ«ˆ«i°ÊUÊÃÊÃivÊVi>˜ˆ˜}ʇÊ>œÜÃÊ ÃV>iÊ «>À̈ViÃÊ ÌœÊ vÕÃ…Ê œÕÌ°Ê UÊ ÌÊ …>ÃÊ vœ>̈˜}Ê LÀÕÅiÃÊ to insure movement which helps eliminate sticking brush in casing. The J200 WELL CLEANING TOOL has interchangeable brush sizes for 4” to 6” casing. (Patent Pending). The J400 WELL CLEANING TOOL has interchangeable brush sizes for 8” to 16” casing. (Patent Pending). For more information call today! 800-457-2096 or 806-747-2096 or fax 806-747-7138 or www.coteychemical.com. Cotey Chemical Corp.

CARD #112

GEFCO is introducing the new Quikdrill model. Targeted toward the geothermal industry, the Quikdrill is developed to provide reliability in a compact form. It offers the option to drill with tophead, table, air, mud or any combination of the four. George E. Failing Co.

CARD #103

You asked for more features and more power with a small footprint, and we delivered. The 7822DT is the answer! Features include a new GH64 Hammer with Modular Percussion Power Cell technology and integrated two-speed, bi-directional rotation. 48,000 lb. of Pullback. Totally redesigned Control Panel. Rear stabilizer with Geoprobe® Drop Rack System. Tier 3 compliant diesel engine ... and much more! Only from Geoprobe Systems. 1-800-436-7762. www.geoprobe.com

Sonic Drill Corporation, a world leader in sonic drilling technology, recently released a sonic drill rig that is able to fit within a 20’ shipping container – reducing shipping costs by two-thirds. With its agile smaller size and lower price, the launch of the SDC350 has created a buzz with buyers who previously thought a sonic drill rig was out of reach. Sonic Drill

CARD #107

CARD #110

Coming Up…

New Rig Model for Geothermal Drilling

CARD #105

Looking to target Drilling Contractors? The most powerful responsive list of drilling contractors is just a phone call away. Introduce new products or test markets with National Driller’s exclusive subscriber list. We provide superior names for your targeted mailings to help you achieve optimal response. POSTAL Sr. Account Manager: Kevin Collopy *…\Ênää‡ÓÓ·ӣ™{ÊÝÈn{ÊÊUÊÊ ‡>ˆ\ʎiۈ˜°Vœœ«ÞJˆ˜vœ}ÀœÕ«°Vœ“ E-MAIL Sr. Account Manager: Michael Costantino *…\Ênää‡ÓÓ·ӣ™{ÊÝÇ{nÊÊUÊÊ “>ˆ\ʓˆV…>i°VœÃÌ>˜Ìˆ˜œJˆ˜vœ}ÀœÕ«

Corporation.

National Driller “The drilling industry’s #1 source for buying and selling equipment”

www.NationalDriller.com

November 2011 U U U U

Exploration Drilling Hammers & Bits Rotary Drilling Product Showcase: Drill Tooling & Accessories Bonus Distribution: CGWA & OWWA

Advertising Space Deadline: October 3, 2011

December 2011

~ Ground Water Expo Issue ~

U Environmental Drilling U Foundation Drilling U Product Showcase: Geothermal Drilling Products & Equipment Bonus Distribution: NGWA - Ground Water Expo

Advertising Space Deadline: November 1, 2011

Call For Information 800.874.4245 www.NationalDriller.com | 57

M

onitoring well development is necessary to ensure that complete hydraulic connection is made – and maintained – between the well and the aquifer material surrounding the well screen and filter pack. The appropriate development method should be selected for each project on the basis of the circumstances, lithology, objectives and requirements of that project. Project-specific planning documents can identify the specific development method to be used. In general, most wells are developed by using surge block and bailing methods to draw the coarse and/or fine material out of the sand pack. Other development methods that may be used include jetting, airlift and submersible pump methods. Jetting typically is not used as a development method for environmental investigations, but is commonly used for water resource monitoring wells or production wells. Well development should begin no sooner than 48 hours after well installation. However, if drilling muds are used during

Potential physical and chemical hazards need to be addressed when planning monitoring well installation. Photos courtesy of the U.S. Geological Survey.

58 | NATIONALDRILLER October 2011

Card No. 32

(Continued on Next Page)

(Monitor - Continued) well installation, well development should occur approximately 24 hours following well installation so that the drilling mud does not set up in the well screen section. Generally, a phased process is used to develop wells, starting with a gentle bailing phase to remove sand, followed by a surging phase, and then a pumping phase after the well begins to clear up. After a well is first installed, and, in fact, often before the bentonite pellet seal is set, gentle bailing is used to remove water and sand

Surge blocks need to be constructed of materials that will not introduce contamination into the well. Surge blocks should have some manner of allowing pressure release to prevent casing collapse. The surge block is moved up and down the well screen interval and then removed, followed by a return to bailing to remove any sand brought into the well by the surging action. Care should be taken to not surge too strongly, as the well screen interval often is the weakest part of a well. Surging should be followed by additional bailing to remove fine ma-

impossible. During well development, pH, specific conductivity, temperature and turbidity should be monitored frequently to establish natural conditions and evaluate whether the well has been completely developed. The main criterion for well development is clear water (Nephelometric turbidity units or NTU of less than 5). As mentioned above, clear water often can be impossible to obtain with environmental monitoring wells. A further criterion for completed well development is that the other water-quality parameters mentioned above stabilize to within 10 percent between readings over one well volume. The minimum volume of water purged from the well during development should be approximately a minimum of three borehole volumes (wells

typically will not reach stabilization of water-quality parameters before this condition is achieved, and may not have reached stability even after this threshold has been achieved). The above is a general guideline for difficult well development; projectspecific planning should address any project constraints on well development. Development water should be stored in 55-gallon Department of Transportation-approved drums and/ or baker tanks, depending upon the total volume of purge water removed from the newly installed wells. ND This article is provided through the courtesy of the U.S. Environmental Protection Agency; it is excerpted from the agency’s standard operating procedures for monitoring well installation.

Gentle bailing to remove water and sand from the well. from the well. The purpose of this technique is used to settle the sand pack. After further well sealant materials have been added and allowed to set for approximately 48 hours, bailing is resumed as part of well development. The purpose of bailing is to remove any fine material that may have accumulated in the well, and start pulling in natural material into the sand pack. Bailing often is conducted until the sand content in the removed water begins to decrease. After the sand content begins to decrease, surging is conducted. A surge block is used to move sediments from the filter pack into the well casing.

terials that may have entered the well during the surging effort. After surging has been completed and the sand content of the bailed water has decreased, a submersible pump is used to continue well development. The pump should be moved up and down the well screen interval until the obtained water is relatively clear. Well development must continue until the water in the well clarifies, and monitoring parameters, such as pH, specific conductivity and temperature, stabilize. It should be noted that where very fine-grained formations are opposite the screened interval, continued well development until clear water is obtained might be Card No. 23

www.NationalDriller.com | 59

Foundation Drilling Expo and Conference

Card No. 13

ENID DRILL SYSTEMS INC. 4510 East Market, Enid, OK 73701

From the dairy barns of California to the swamps of South America, we’ve got you covered! Phone Fax

580-234-5971

580-234-5980

Available for immediate operation s)NGERSOLL2AND4(  s#ANTERRA#4 s.EMAC #ONTACT'ARDARAT   

www.eniddrill.com Card No. 54

60 | NATIONALDRILLER October 2011

ADSC: The International Association of Foundation Drilling will be conducting its tri-annual, Intern䜘>Ê µÕˆ«“i˜ÌÊ 8*"Ê >˜`Ê /iV…‡ nical Conference March 14-17, 2012, at the new JW Marriot San Antonio (Texas) Hill Country Resort and Spa. Mark your calendars now to attend the world’s only equipment exposition and technical conference devoted entirely to the drilled foundation and anchored earth retention industries. Major manufacturers, distributors and service providers in the industry will be exhibiting in outdoor and indoor venues. You will see the very latest and most extensive equipment display ever presented, in more than 150,000 square feet of indoor and outdoor exhibit space. This one-of-a-kind equipment exposition provides the most focused venue anywhere for geo-construction specialty subcontractors, general contractors, design engineers and owners of geo-construction. More than 2,000 professionals from around the world will gather at this event. In addition to the state-of-the-

art equipment on display the conference will feature an unmatched technical program with the world’s leading researchers, designers, testing experts, and practitioners providing the very latest technical information available, anywhere! The education program will include: small- and large-diameter drilling; hollow bar research; slope stabilization using micropiles; grout confinement on strain compatibility; LRFD design; delivery systems, including design/build discussions; design and application for anchored earth retention systems; safety; quality control/quality assurance; case histories and more. A long list of leading organizations in the geo-construction industry are participating as cooperating organizations for this unique conference, most of which will be exhibiting along with 200 of the world’s leading equipment and service providers in the industry. For information about how to become an exhibitor and/or attendee visit www.adsc-iafd.com, or send an e-mail to [email protected].

MD Drilling & Blasting Honored and Institutional Builders, Wellesley, Mass. “We have a very strong safety culture,” says Capasso. “Our safety director and team should be congratulated, as well as the individuals within the MD division in Massachusetts, es-

pecially since not only did we achieve a rate 25 percent lower than the industry average in the specialty division, we achieved a zero incident rate.” MD Drilling & Blasting, a subsidiary

of Maine Drilling & Blasting, is recognized as a leader in the industry and offers drilling and blasting services to the construction and quarry markets, along with a variety of specialty services throughout the Northeastern U.S.

tube technologies inc 800.536.5875

John Capasso receives the AGC Merit Award from Phil Hammond. MD Drilling & Blasting was honored with an Associated General Contractors (AGC) of Massachusetts Merit Award for an Exemplary Safety Record. The Merit Award is given to AGC of Massachusetts members that achieve an incident frequency rate 25 percent lower than the state industry average. In addition to incident rate measurement, the criteria included company management, active employee participation, safety training, work site hazard identification and control, and safety program innovation. John Capasso, president of MD Drilling & Blasting, received the award from Phil Hammond, director of client relations, the Association of Commercial

Premium Quality Inertia Welded Drill Pipe Over 30 years of Experience Sizes: 1” - 10-3/4” O.D. 2” IF - 6-5/8” IF 2-3/8 API Reg - 8-5/8 API Reg Mayhew Jr - Mayhew Reg F.E.D.P. - BECO 88.9 - 244 mm All Other Tool Joints

Sonic Casing, Bits, & Rods Subs Stabilizers Drill Collars Drillable Casing Pile Driving Casing Down Hole Tooling Percussion Casing

Serving: Waterwell Gas & Oil Environmental Mining Utility Construction

Introducing inertia welded 6-5/8” Smooth-Flow 5101 Boone Ave. N. Minneapolis, Mn 55428 9 763.536.5985 9 763.536.9102 fax www.toolyourdrill.com Tom Ronnkvist - [email protected] Card No. 27

Laser Marked Water Level Meters

New 101 P7 Water Level Meter The NEW Solinst 101 Water Level Meter with P7 Probe features an extremely durable, laser marked PVDF flat tape, with an enhanced dog bone design that is thicker, reducing adherence to the side of well casing. t
New P7 Submersible Probe measures water levels and total well depth t
More consistent measurements with sensor located at the tip of probe t
New PVDF flat tape has increased tensile strength and electrical efficiency The PVDF flat tape is laser marked every 1/100 ft or each mm; lengths up to 6000 ft (1800 m). New flat tape has increased tensile strength and electrical efficiency by using 6 strands of copper coated stainless steel and 13 strands of stainless steel in each conductor. P7 Probe is engineered to allow submersion to 1000 ft. (300 m), replacing the 101 P6 Submersible Probe. Sensor at the tip of the probe provides consistently accurate measurements in wells, boreholes, and cascading water, with almost zero displacement.

102 & 102M Mini Water Level Meter Standard 102 Water Level Meter lengths to 1000 ft (300 m). The 102M Mini Water Level Meter80 ft (25 m) length. t
Precise laser markings every 1/100 ft or each mm t
Two narrow diameter probe options t
Easily spliced strong flexible cable

www.solinst.com High Quality Groundwater and Surface Water Monitoring Instrumentation Solinst Canada Ltd., 35 Todd Road, Georgetown, ON L7G 4R8 Fax: +1 (905) 873-1992; (800) 516-9081 Tel: +1 (905) 873-2255; (800) 661-2023 [email protected]

Card No. 56

www.NationalDriller.com | 61

Pump Donation Keeps Water Flowing The world’s largest manufacturer of pumps and pump technology has, since its founding in 1945, focused on values and, as part of that commitment, supports its dealers in their efforts to give back to their communities. When long-time Grundfos dealer, Beinhower Brothers Drilling Co., Johnstown, Ohio, president Brad Ulery sought the manufacturer’s support for a unique demonstration home in nearby Columbus, district sales manager Jim Cole responded with the only answer possible – of course. The donation request was for a Grundfos SmartFlo SQE Constant Pressure System to be installed in the Universal Design

Living Laboratory (UDLL). UDLL is designed to help architects, builders and the public better understand how to cre-

ate an accessible, comfortable living environment that enhances quality of life. The UDLL home incorporates unobtrusive

BentonitePlug

3.34

$

per bag

800-243-7455 [email protected] www.pdscoinc.com

Water Well



62 | NATIONALDRILLER October 2011

Geotechnical



Geothermal

Card No. 77



Environmental

universal design, resource- and energy-efficient green-building methods, advanced automation technology, a healthy-home construction approach and feng shui design principles. The finest craftsmanship and state-of-the-art products and services are incorporated. The gardens will feature wheelchair-accessible pathways with raised flowerbeds and containers. Rosemarie Rossetti, a wheelchair user, and her husband, Mark Leder, are building and will live in the UDLL home. Rossetti has been using a wheelchair for the past 12 years, after a 7,000-pound tree fell on her while she was riding her bicycle, causing a spinal-cord injury that severely limits her mobility. While the UDLL eventually will become their home, Rosemarie and Mark’s vision reaches far beyond themselves. They embarked on the project to help the almost 54 million people in the United States with physical disabilities as well as the 76 million aging boomers. Similarly, Rossetti and Leder set out to design and build a home that meets industry-leading standards for efficiency and sustainability. When construction is complete this fall, UDLL will be apply for certification under the U.S. Green Building Council LEED (Leadership in Energy and Environmental Design) for Homes program, and to the National Association of Home Builders under its National Green Building Program, as well as for ENERGY STAR program certification.

Beinhower Bros. Drilling Co. was founded in 1923 by the Beinhower brothers. Chuck Beinhower owned and operated the company until 1977 Ulery. when it was willed to William Montgomery, a longtime employee. Brad Ulery has owned and operated the company since March of 1987. Our water drilling purposes include drinking water, irrigation water, heating and cooling, and pond, lake and stream recharge. Other drilling applications include exploratory drilling, custom drilling and evironmental drilling.

Newest Atlas Copco Store

Copeland Supply Co., Inc. (WY0/sss'RAND*UNCTION #OLORADO

Manufacturers Of:

BLASTHOLE AND EXPLORATION DRILLING EQUIPMENT sDRILL PIPE vTHROUGH v/$ THROUGH,ENGTHS 2ANGE))) !LUMINUM$RILL0IPE v3MOOTH&LOW

s v!0)2%'THROUGH v!0)2%'

sDRILL COLLARS  vTHROUGHv/$

SERVING THE DRILLING INDUSTRY SINCE 1979

sCROSSOVER SUBS sBIT SUBS s,)&435"3

sv)&THROUGH v)& sv"%#/THROUGHv"%#/ s&( (  MAYHEWAND&%$0

YOUR DOWN HOLE TOOL COMPANY COMPLETE MACHINE SHOP & REPAIR SERVICE

Machine Shop & Repair Facility Quality, Competitive Pricing, FAST Service Atlas Copco has opened the doors of its 13th U.S. store in Pompano Beach, Fla., and plans are in place for an Oct. 20 grand opening event. Products featured at the new store include the full line of Secoroc rock drilling tools, surface crawler drill rigs, and geotechnical drilling tools and accessories. According to Andrew Andre, southeast region manager for Atlas Copco, customers have been very positive about the new store. “They’re happy to see Atlas Copco make a direct com-

mitment to support them down here in south Florida with new and used machinery, as well as parts and service.” Recent appointments of Jeff Dolezal as area salesman and Mike LaZella as branch administrator have filled key leadership posts at the store. The Miami Atlas Copco store is located at 2480 N.W. 16th Street in Pompano Beach, a half mile from the Florida Turnpike, and 2.5 miles from I-95, providing convenient access to the region. The telephone number is 954-977-1041.

DRILLING TOOLS

(970) 858-1175 Card No. 3

Award-winning Treatment System Orenco Systems, a Sutherlin, Ohiobased provider of sustainable wastewater collection and treatment solutions, has won the Water Environment Federation’s (WEF) prestigious Innovative Technology Award for the nu-

throughout North America and in more than a dozen countries worldwide, On Oct. 18, Orenco will be officially presented with its Innovative Technology Award during a ceremony in Los Angeles, at WEFTEC 2011, the

trient-removal configuration of its AdvanTex Treatment System. The AdvanTex Treatment System is designed for unsewered communities or commercial properties needing a cost-effective, easy-to-maintain and reliable solution for environmentally sustainable treatment of wastewater flows. The treated effluent can be disposed of subsurface, used for irrigation or re-use, or permitted for surface discharge, meeting the most stringent requirements. More than 25,000 AdvanTex units have been installed

largest annual water quality conference and exhibition in the world. “We are honored to be the recipient of the prestigious award from WEF for our AdvanTex System,” says Grant Denn, sales manager. “We strive to develop and bring the most innovative solutions to the market, and are encouraged by the acceptance and recognition that these efforts have brought. And with WEF’s contribution to the wastewater industry, we feel that WEFTEC is an excellent forum in which to display our technologies.” Card No. 24

www.NationalDriller.com | 63

Stratex

Hydraulic Casing Puller Slips & Bowls

 Compact

design  Light weight  Ready to be connected to your hydraulic pump  Independent operation  Vertical/ Horizontal operation

Hydraulic Casing Puller CP 100

31⁄2 – 51⁄2

35 tons

CP 200

3 ⁄2 – 6 ⁄8

85 tons

CP 300

31⁄2 – 85⁄8

120 tons

1

5

Casing & Rod Slips

Bowl

3” 31⁄2” 4” 5”

3” – 5”

4” 5” 6” 7”

5” – 7”

6” 7” 8” 9”

7” – 9”

Frac Water Treatment Meets New Regs

MANUFACTURED UNDER ISO 9001 QUALITY CONTROL STANDARDS

DEALER INQUIRIES WELCOME

STRATEX DRILL SYSTEMS A DIVISION OF HYDUKE ENERGY SERVICES INC.

2915 - 15 Street NE, Calgary AB, Canada T2E &L8 Toll Free: 1.877.336.4626 +
Fax: 403.250.5364 E-Mail: sales @stratex-mco.com

www.stratex-mco.com Card No. 21

HIGGINS RIG CO. www.higrig.com Uptime . . . The key to your operation!

Drills For Every Budget (Just a few of the hundreds of drills we have listed!)

75 IR TW, 900/350 Comp., Mtd On 75 CCC

BARGAIN Drill Parts Partial List of in Stock Parts

JUST ARRIVED Several Truckloads of Cable Tooling TONG DIES – ALL SIZES Bargain Prices 41/2” x 27/8” x 25’ IR Drill Pipe 41/2” x 31/2” x 25’ IR Drill Pipe New Acker 1-3/4” x 10’ Rod Drilling Jars, Fishing Jars, Button Bits, Chisel Bits, Elevators, Stems, J Wrenches, Rope Sockets Rebuilt Noster Box for TH60 All Brands Of Mud Pump Parts Pump Drive Gear Box Rebuilt G/D 5 x 6 Mud Pump Rebuilt 51⁄2 x 8 G/D Mud Pump Rebuilt Tulsa Winch Model 23 Mission 4 x 3 Pump 41⁄2 X 31⁄2 HS Auger Groutmaster Grout Pump 3406 CAT Engine

The List Goes On And On . . .

We Have Everything For Your Drilling Operation!

89 Schramm T450W, 250/150 Comp., 5 X 6 Mud, Mtd. on 89 Ford FT900

Rebuilt G/D 5 X 6 Mud Pump, Air Operated

BE 60L, 3 Line Rig, Mtd On Trailer

FREE Catalog Call Today: Toll FREE (800) 292-7447 (270) 325-3300 fax-(270) 325-3405 http//:www.higrig.com Search Keyword: higrig [email protected]

QUALITY MACHINERY TO INCREASE YOUR PROFITS Card No. 42

64 | NATIONALDRILLER October 2011

With a Pennsylvania regulation becoming law that prevents the discharge of incompletely treated hydrofracturing (frac) water from natural gas drilling into area rivers, Altela Inc., a water treatment company based in Albuquerque, N.M., has begun implementation of the solution to the frac water problem at a plant in Williamsport, Pa., by treating 100,000 gallons a day of frac water to better-than-drinkingwater standards. This successfully treated water can be used again for hydrofracturing, or put into our rivers with no harmful effects to people or wildlife. “The treatment of Marcellus Shale flowback frac water in Pennsylvania has successfully begun,” says Altela CEO Ned Godshall. Under the new regulation, natural gas drilling companies will no longer be permitted to take frac wastewater to facilities throughout Pennsylvania that failed to properly remove salt and other contaminates before releasing the water into rivers. The regulation comes after authorities discovered high levels of bromide, other harmful chemicals and total dissolved solids (TDS) in river water sampling. The new Altela technology in Williamsport, at Clean Streams LLC, successfully removes salts and contaminants to safe standards, according to state and federal officials. “With 4 million gallons of water generated from a single natural gas

well, it’s imperative water treatment plants find a safe and effective way to treat frac water,” says Altela CEO Ned Godshall. Godshall, who grew up in central Pennsylvania, views the state’s ability to properly treat its frac water as paramount to the success of the natural gas drilling in the Marcellus Shale. Thousands of jobs are at risk if natural gas companies in Pennsylvania cannot meet regulations. A study by Penn State estimated more than 215,000 jobs with an average salary of $79,184 would be created by natural gas drilling in Pennsylvania by 2015, if the industry can thrive. Altela’s technology treats water by mimicking mother nature’s process of making rain The mechanics are simple – each AltelaRain tower is composed of two chambers. Steam and ambient temperature air, taken from a heat stream or waste heat, circulate throughout the two chambers. As brackish water enters one chamber, it evaporates by passing through the steam. The water’s contaminants fall to the bottom and exit the chamber. Next, dry air is pumped into the bottom of chamber, which carries the evaporated water molecules into the other chamber. From there, the water is condensed into clean water droplets. As the water condenses, it becomes colder, and emits heat that re-enters the other chamber and evaporates the brackish water.

It’s Safety First at Summit Drilling Summit Drilling, Bridgewater, N.J., one of the Northeast’s largest environmental drilling companies also is one of the region’s safest operators. Summit Drilling’s director of health and safety, Denis Crayon, accepted a well-deserved Recognition Award at the Governor’s Annual Occupational Safety and Health Awards Program. This award is presented to organizations with an outstanding safety records throughout 2010. This annual event has been a pillar of achievement in the prevention of workplace injury and illness for 83 years. The New Jersey Department of Labor and Workforce Development, the New Jersey State Industrial Safety Committee, and the New Jersey State Safety Council sponsor this important program. Summit Drilling’s commitment to health and safety has reached new heights, having more than doubled its efforts over the past three years. Field service crews, members of operations, health and safety program coordinators and management are required to attend 6 a.m. weekly health and safety meetings. “Our health and safety meetings provide an opportunity to share best practices and embed safety in the minds of our people on a consistent basis. Over time, this has become a part of our company culture, and is the glue holding our program together,” states Crayon. “If anyone feels that safety programs like this are unnecessary, I say look at the statistics. People first, and then equipment, are the company’s greatest assets. So how

Joseph Schwed (New Jersey State Industrial Safety Committee), Denis Crayon (Summit Drilling health and safety director), Patrick Delaney (New Jersey State Industrial Safety Committee) and Mark Wadiak (New Jersey Department of Labor & Workforce Development).

can an investment in protecting them be anything but necessary? I’m extremely proud of our guys and the record we are building here at Summit. I also feel fortunate to be at a company where the work I do is a priority.” To be honored at this long-standing and prestigious event, Summit Drilling racked up some impressive numbers. As of Aug. 18, 2011, Summit Drilling has worked 583 consecutive workdays without a lost-time incident, representing approximately 173,844 man-hours worked. Prior to receiving this 83rd Annual Governor’s Occupational Safety & Health Award, Summit Drilling also received the Annual Eyes on America Workforce Safety Award this past June.

Subscription Renewal

Make sure you answer all questions and sign card to qualify.

Or subscribe/renew on-line at…

www.NationalDriller.com, www.SubscribeForFree.com, or www.RenewForFree.com and start your FREE subscription to NATIONAL DRILLER today! The Best-Read Publication In The Drilling Industry

Card No. 63

www.NationalDriller.com | 65

Nitrate Coated Premium Liner 'ARDNER$ENVER 5x6 ................................................ $145.00 5x8 ................................................ $165.00 5x10 .............................................. $165.00  X.......................................... $165.00  X........................................ $165.00  X.......................................... $305.00  X........................................ $305.00 Rods-Hard & Chromed 'ARDNER$ENVER 5x6 ................................................ $85.00 X X ..................................... $100.00  X  X ........................ $100.00  X  X ........................ $100.00 Rebuilt Mud Pumps X'$ ......................................... #ALL&OR0RICE '$ X&8/ ........................ #ALL&OR0RICE  X'ASO ................................ #ALL&OR0RICE  X/ILWELL .............................. #ALL&OR0RICE X'ARDNER$ENVER ................... #ALL&OR0RICE 0! '$4RIPLEX .......................... #ALL&OR0RICE

Wheatley 6x6 70 - 36 ,).%2v"ORE .............................................. $200.00 ,).%2 v"ORE ........................................ $200.00 ,).%2v"ORE .............................................. $185.00 Wheatley 6x6 10 - 36 ,).%2v"ORE .............................................. $183.00 ,).%2 v"ORE ........................................ $183.00 ,).%2v"ORE .............................................. $134.00 Wheatley ,).%2X  .......................................... $134.00 ,).%2X  ........................................ $183.00 ,).%2X  ........................................ $200.00 ,).%2X  ........................................ $350.00

Parts Made in the USA

- SPECIAL -

Brand New Pumps In Stock '$X4%%4RIPLEX ...................... #ALL&OR0RICE '$ X4(%4RIPLEX ............... #ALL&OR0RICE '$X ......................................... #ALL&OR0RICE '$ X ................................... #ALL&OR0RICE '$X!IR$RIVE &' !' ............. #ALL&OR0RICE '$X'EAR$RIVE &' &8' ....... #ALL&OR0RICE '$ X .................................. #ALL&OR0RICE '$ X .................................. #ALL&OR0RICE '$ X ............................... #ALL&OR0RICE '$ X ............................... #ALL&OR0RICE (YDRAULIC'ROUTPUMP..................   WGAUGEPACKAGE Also New Centrifugal Pumps In Stock

'$X*ACKSHAFT"EARING(OUSING/FFSET 2EBUILT X'ASOMUDPUMP SKIDMOUNTED WITHUSED$ETROITDIESELPOWERUNIT 2EBUILTX7ORTHINGTONSKIDMOUNTEDWITH REBUILT$ETROITDIESELPOWERUNIT 7EHAVEMANYREBUILTPUMPSINSTOCK

37TH3TREETs0OCAHONTAS )OWA53!sss   (OUR $AYA7EEK0HONE3ERVICEsss&!8  

% -AIL!DDRESSAMCI ARMSTRONGMACHINECOMs7EBSITEWWWARMSTRONGMACHINECOM

53!#ANADA4OLL&REE!- 0--ONDAY &RIDAYsss  

FREE SUBSCRIPTION & READER INFORMATION

Card No. 33

1. Would you like to receive a FREE subscription to National Driller? T YES! T no SUBS

7. How many rigs does your firm operate? (select ONE only)

2. Please check your preferred format: T Print Version T Digital Version

8. Does your company conduct drilling and/or water systems operations? T Yes T no

3. What is your company’s primary business? (select ONE only)

9. Please indicate which FREE eNewsletters you would like to receive: National Driller eNewsletter TYes Tno The Foundations Report eNewsletter TYes Tno

CR www.Nationa IBE ONLINE AT lDriller.com/s ubscribe

01 02 03 04 09 05 06 08 07

R R R R R R R R R

Drilling Contractor Pump Installation Contractor Irrigation Contractor Water Conditioning/Treatment Supplier/Contractor Engineering Wholesaler/Distributor Manufacturer Manufacturer’s Rep Other (specify) ____________________________________________

4. What is your job title? (select ONE only) 08 12 13 11 07

R R R R R

Owner/Executive Driller/Drilling Supervisor Operations Specialiat/Field Agent Estimator/Dispatcher/Office Manager Other (specify) ____________________________________________

05 R10 or more

03 R4-6 04 R7-9

01 R1 02 R2-3

Signature

Date

Print Name

Title

Company Address City/State/Zip Code

5. What type(s) of work does your company perform? (select ALL that apply) 12 03 01 02 04 13 06 07 08 09 10 11

RGeothermal RFoundation Drilling RWater Well Drilling RHorizontal/Directional Drilling RMonitoring/Environmental Drilling RGeotechnical RIrrigation RWater Conditioning/Treatment RPump Installation/Maintenance RMining/Quarrying RExploration (oil/gas) ROther (specify)

Work Phone

Work Fax

E-Mail

RAPSUB

By providing your fax number, you’re giving BNP Media permission to fax to you. You will receive subscription and renewal notices from BNP Media via e-mail. Write in the card numbers below for more information from advertisers

6. What type(s) of drilling rigs does your firm operate? (select ALL that apply)

66 | NATIONALDRILLER October 2011

01 02 03 04 05 06 07 08 10 98

RAir-Rotary RMud-Rotary RPercussion/Blasthole RAuger RCore RDirect-Push/Probe RHDD (directional) RSonic RCable-Tool ROther (specify)

Return this form to: National Driller 440 Quadrangle Dr., Suite E Bolingbrook, IL 60440 Fax: 1-888-533-5653 or go online www.NationalDriller.com/freeproductinfo

A

PARTING SHOT

This photograph comes courtesy of Boart Longyear, which has a drilling services business that includes experience in proven drilling methods such as reverse circulation, sonic, percussive, and underground and surface coring.

ND

THEMARKETPLACE The Industry’s #1 Source for Buying/Selling Used Equipment. 2 ADAPTERS Used 10” Baker Pitless Adapter - 10” pipe size x 5 ft. bury x 6” discharge. (has old style cap) .......$1,200 plus shipping. Contact Larry at 734-216-0450.

3 APPRAISALS I WANT TO BUY PUMP HOISTS DRILL RIGS & RIG PARTS RENE HENDON 281-260-0880

8 AUGER RIGS 1994 CME 75 mtd. on 1994 F-800. Auto hammer, Moyno 3L8. 3 hoists, wiggle tail slide, hyd. breakout table, hyd. chuck. Water tank, toolboxes...............$108,500. Call Gary Bray at 770-389-0475.

1984 CME 550 for parts. Bombardier Parts. CME 45C Trailer or Buggy. Malone Equipment Inc. 705-887-4512

Rigs & Tooling @ EARTHX.COM 2000 CME 75 – 2,850 hrs. Cummins eng., HT rotary box, large Kelly, 3L8, 2 winches, hyd. brkout holder and wrench, 3J swivel, 4-1⁄4 spindle ext., slide base, auto hammer, quick disconnect mast and angle cap, 75 gal. fuel tank, incls. spare Kelly and HS rotary box. Mounted on tandem 2000 Int’l truck, 72,450 miles, 3 toolboxes ............$185K. Call Anne 630-458-0590.

FOR SALE OR TRADE TRUCK MOUNT ATV Rig - 1995 CME 850, 3 hoists. 3L8 Moyno pump .........................$80,000.00. 1989 CME 45B mounted on Morooka MST 600. Very clean rig, in good condition................................$45,000.00. 2000 CME 45C mounted on Morooka MST 600. Auto hammer, 2 hoists, 3 leveling jacks, good condition....$55,000.00. Contact David Jamison at 937-764-1542 or 513-615-4468. e-mail: [email protected]

CME/ACKER/MOBILE 1993 Mobile B-59 loaded..........$70,000. (2) CME 550’s ..................................Call. 1998 B-53 diesel, diesel ............$40,000. CME 75. Nice ...................................Call. HC 150 Longyear ............................Call. Cable tool 22W & 20W. Package ...Call. Minuteman Drills. Tooling & pumps. Buy/Sell/Trade. 812-689-7042 68 |

Singley Construction Company, Inc. E-mail: [email protected] Web site: www.singleycc.com Phone: 601-736-6393/ Fax: 601-736-7304

Air Knife – 2006 Excavac HT-180C mounted on a 2006 Mitsubishi FE180 diesel truck, AT, AC, Non CDL, 74,000 dealer serviced miles. Deutz deck engine, 1,600 hours, fully tooled, both excellent condition throughout w/flawless service record. Powerful & efficient.

EQUIPMENT FOR SALE Ardco Super L ATV B-33 Mobile Drill X-Government Drill has 607 hours, slide base, drop hammer, Moyno pump, 2 winches in excellent condition. . . . . . . $40K. B-57 ORV has 2,011 hours slide base, drop hammer, 3L6 Moyno, 3 winches in good condition....$45K. 1987 Mobile B-57 mounted on a '94 F-800. Both diesels. 2 winches, drop hammer, cathead, Shelby tube extruder and slide base . . . $48K. Geoprobe 5400 mounted on a '96 F250 4x4. . . . . . . . . . . . . . . $15K. 2003 AMS Power Probe 9700 -PTO mounted on a 2003 550 Ford with new diesel engine. Hollowstem capabilities, 5,000 ft/lb torque, 80” probe stroke, 5' push, 175 ft-lb hydraulic hammer, water tank . . . . . . . . $55K.

1988 CME-550 - Rubber tire, Deutz engine, 2 hoist plus wire line, 3L6, auto hammer, rod holder and breakout, QD spindle ............................................$60K. 678-227-2458 Located in Atlanta.

$82,000.....815-482-8995

2003 Soilmec 312, 105´ Kelly $320,000 OBO. 307-382-4216 Wanted To Buy: CME Rigs Any condition. Call 770-633-4252.

´72 CME high torque 55, 300 Ford, 25 ft. mast, wiggle tail auto hammer, on a ´82 International 4WD.......$35,000 OBO. ´83 CME standard 55, 5 cyl. Deutz diesel, wiggle tail auto hammer, breakaway mast, on ´96 Ford Cummins diesel. .........$45,000 OBO ..........308-380-5899.

Gus Pech - 21' Stroke. Very low hours, 9,608 miles on International Model 4900 truck 2,837 hrs. on rig, head completely rebuilt .............................Price Reduced. Call for info or photos 540-254-2289.

2000 CME 550X, Cummins diesel engine, angle drilling capabilities, Bean 435 pump, well maintained, excellent condition................Price $155,000.00. Also Available; 2000 Sterling Tractor and Dynaweld Trailer..Price $30,000.00. 313-389-5300 ´89 B-57 on ‘00 F-650, under CDL, gas engine, wiggle tail, auto hammer, 3L6. $40K 214-536-0212

1995 BK-51 (same as CME 45) Drilling Rig mounted on 1995 F-700 4x4. Rig and truck run excellent. 500 gallon water storage. 2 winches. 3L8 Moyno pump. Rig is located in Florida. Asking $25,000. Call 800-487-9665.

1995 Ford FT900F Truck w/Mobile Drill Rig: 102,262 miles on odometer, Cummins ISC L6, 8.3L (504CID) diesel engine, Eaton Fuller 16-speed transmission, Tandem axle w/differential lock, Brakes replaced within last 1,000 miles, In-frame over-haul w/in last 10,000 miles. 1994 B59 Mobile Drill w/2 winches, Hydrostatic Drive, Swing out Auger Racks, 2J Water Swivel, Moyno 3L8 Water Pump, Auto Hammer, Cummins 4-cylinder engine, 5,958 hours on meter. 500-gallon water tank, 25' Mast & Quick Disconnect Mast . . . . . . . . .$57,621. 530-674-5861 2000 CME 550X - auto hammer, rod holder & breakout wrench, 3 winches, wireline, in/out side to side slide. $126,000..........770-633-4252

2007 Mobile B-48 (same as B-53) on Bombardier Muskeg. Muskeg has Perkins diesel and 28" steel cleats on rubber belts, great for rough terrain. Used very little since new. Asking $148,000...800-410-5550

N AT I O N A L DRILLER October 2011 www.nationaldriller.com

1990 CME 850 - Cummins 4BT, 3 hoists plus wireline, winch, 2 water tanks, Moyno pump, auto hammer, breakout..............$60K ..............218-428-6769.

Mobile Drill B-61. Geoprobe. (2) CME-750’s. (3) CME-75’s. Gus Pech 1000R. Call 808-478-7112.

Diedrich D50 Morooka mounted (nice) (2) B53 Drills. B57 truck mounted. Misc tools, parts, supplies. Low overhead, lower prices on Morooka carriers and mounting...........................615-405-2798. E-mail: [email protected] 1982 Ford F700 and 1992 Dodge 1 ton w/CME drill. 1993 Chevy 1 ton w/hydro auger drill. 10 ft. 4 wheel trailer. 2 Mono pump flight hollow stem augers with casing. NQ rod w/bits...40k....205-821-7495.

2000 BK-66 - John Deere Diesel, in-out, side-to-side base, 25 ft. mast, hyd. cathead, 2 winches, Moyno, (3) - 36” jacks. Auger & rod rack. Mtd. on 2000 F650 diesel, 48K mi. Rig in excellent condition, low hours & ready to go to work. Asking $64,000.....217-899-4809

1991 BK-51 - Deutz diesel, in-out base, 8" man. cathead, 500 gal. H2O tank, 2 winches (5K#/2K#), Moyno 3L6 pump, 3-36" jacks, Mtd. 1991 F700 4x4 460 gas engine..........$25,000 ........813-908-5555. or e-mail [email protected].

19 BUCKET DRILL RIGS

15 BITS BIG HAMMERS, PARTS & BITS WANTED – SURPLUS

1977 Earthdrill mounted on ´93 Mack. 83 ft. 4-1/4” Kelly. New Kelly winch, Stauffer transmission. Extra parts for rig. $85,000 OBO......307-382-4216

Any Condition! • IR QL-200 • IR DHD 120-124-130 • Numa 180-240-300 • BULLROC

GUS PECH Bucket / Boring Rigs WANTED. Other brands considered. Any condition, Buckets, tooling etc. Call Jared Sisk 816-517-4532.

Bits (Uncracked) 18” to 36” 1-800-691-9166 Damian F.

2007 EZ-Bore Bucket Rig on 2007 Freightliner w/7,000 mi. Assorted bits and 1 extention to 120 ft .....$195,000.00. Call 305-797-3052.

Send Pictures & Information to: Jon Errickson [email protected]

“OVER 10,000 DRILL BITS” Sizes 3-7/8” thru 26” Tooth and Button Tri-Cone Every Formation - Top Quality Call for Prices 810-658-1554/Fax 810-658-2866 Web Site: www.buyrockbitsonline.com E-mail: [email protected]

ROCK BITS! Cable Tool Air Hammer Roller Cone 3” to 24”

22 BUSINESS OPPORTUNITIES See our ad on page 26.

Jerry’s Bit Service 940-393-2394 In business over 20 years Specializing in PDC repair

Our Reputation Rides on Every Bit We Sell

540-635-7753 FAX 540-635-6352

TRIDENT TOOL INC. www.tridenttool.com PALMER BIT COMPANY Geo Thermal heat pump drillers and Water well drillers find that Palmer Bit Company’s large family of step type drag bits not only increase penetration rates and lower bit cost per foot but also provide a good clean hole. These bits are designed to be used in a variety of unconsolidated formations ranging from soft clays to limestones. Bit sizes and styles can be designed on all common threads to meet each drilling condition. Palmer Bits, the best choice in drag bits since 1957.

800-421-2487 (24 hr.) www.palmerbit.com e-mail - [email protected] MC/VISA

References !! BEST PDC FOR THE $

Cell: 317-716-8050 [email protected]

18 BREAKOUT TOOLS SEMCO, Inc. All Hydraulic Hydrorench S110H in Stock 1” - 10” Four Rollers Breaks Pipe Make Pipe to Torque Spec’s PH# 800-541-1562

10" QL80 new hammer bit $1,250 10" SD 8 new hammer bit $1,250

westside-sales.com or call 307-789-9372.

For sale - 28 yr. old water well drilling and geothermal business. $400,000 in equipment. Sell for $600,000. Call for pictures & information ...757-496-8494. Leading NorCal water well drilling co. w/equipment. 35 years in business. Seller Financing. Sunset Vista Realty Lic#01792202............Call 530-252-8022.

[email protected]

“A Good Bit Better”

800-523-5760

Complete drilling co. for sale. 30 yrs. in business. 3 rigs w/all support equipment. $200,000. Pictures & information @

Breakout Unit. 230v 3Ø Electric over hydraulic. Breakout unit skid mounted. $30,000 OBO. 208-772-4004

Diamond Core Drilling Co. For Sale Drilling surface & underground, minerals & geothermal w/diamond core, RC, DTH, air & mud rotary, casing advance. Licensed, insured & bonded 5 yrs. in CA & NV Current contracts in place, all necessary equipment, 3 diamond drills (2 angle deep hole tract mount, PQ-HQ-NQ, underground NQ-2 & truck mount PQ-HQ-NQ) Turn key with all support equipment, back up parts & excess tooling & rods. All debt free. Great start up Co. or mine acquisition. Priced at $1.75M. Call 209-293-7455. For rent: Commercial offices - large or small in Smithport, PA area. May modify to suit tenant. Please call 814-887-5811 or [email protected] for details. FOR SALE: Water Well Drilling & Pump Service in Southern NM. Two commercial acres, 2,700 sq. ft. building, all drilling & pump rig equipment. Annual sales average is one million dollars. Asking 1.75 million. Call 575-649-2019. NW Indiana Enviro/Geotech/Geothermal Drilling Company For Sale - 10 rigs - combo of truck and track, with all support equipment and tools. This is a turn key business. Pictures and info at [email protected] or call 219-956-3481. Pricing negotiable.

BUCKEYE DRILL COMPANY Successor to Bucyrus Erie Well Drill Division

Cable Tool Well Drills Parts, Service New, Remanufactured, Used. PH. 800-767-3745 www.buckeyedrill.com

CABLE TOOL RIGS, PARTS, TOOLING & ACCESSORIES Call Toll Free: 1-800-292-7447 or 270-325-3300 Parts for Spang fishing tools, ripper blades, tubing slip, alligator jaws, combination sockets/slips, trap-slip socket slips and other parts. API rotary & cable thread gauges ...........Call 724-445-3511. BE 20W drill rig, hyd. all tools. Gas powered unit, catwalks. Nice machine. $10,500 501-344-2292 or 501-230-0833. B.E. Parts. New and used. Exchange jack shafts for 20W, 22W, 24L & 60L’s. (We also buy BE parts and rigs for cash). 270-858-3040 or 813-843-6720.

CABLE TOOLS! ROPE SOCKETS STEMS BAILERS JARS & SUBS Combination Sockets

800-523-5760 540-635-7753 FAX 540-635-6352

TRIDENT TOOL INC. www.tridenttool.com 22W Series 1 on ´87 Ford with Bucyrus paint job......................................$19,500. 24W on ´70 International......$15,000. All size cable & fishing tools ..203-888-2132. 60L and 20W BE - lots of tools, original motors, Montana rigs. NO RUST. 700 ft. of 7/8 cable. 406-580-2818 55 SpeedStar 3 line machine, good jackshaft, all new cable, tooled-up for 4”, mtd. on 1970 Chevy, good paint, good tires. Call for photos. Serial No. 11464. E-mail: [email protected] Call 517-857-2266 or 517-204-1635. [4] 22W & [3] 20W Parts Rigs, complete jack shafts; [2] 22W Rigs; [1] 28L; [1] 60L; [2] 20W’s; all size cable and fishing tools; elevators; sub ......................270-565-1538.

HOCKER MACHINE SHOP

25 CABLE TOOLS Parkersburg Tool Co. 1004 Depot Street Parkersburg, WV 26101 Manufacturer of a complete line of Acme Drilling & Fishing Tools; Jars; Bits; Stems; Rope Sockets; Bailers; Subs; Drive Clamps; Pulling Heads; Rental Fishing Tools; Joint Turning. 304-428-8015/Fax 304-428-8059

Special price on Cable Tool NEW & USED. Drilling & Fishing Tools Sales & Rentals New and Used Tools. Sideload Rope Sockets Available. Accepting Visa & Mastercard

270-926-2889

www.nationaldriller.com N AT I O N A L DRILLER October 2011 | 69

25 CABLE TOOLS

32 CASING DRIVERS

BE 22W Series II - auto braces, recent jack shaft & shock replacement on ´84 Kodiak. 600 ft. of new cable. Tools incl. Drilling daily.....$19,000.....518-797-3786.

CASING ROTATOR Capable of 6” through 26” diameter. Custom Fit to your rig! 800-691-9166

Cable Tool Rig - 22W Series 3 on 1990 International diesel truck. Good condition, fully functional, 5" and 6" tools included. Hydraulic jack on front. Call 262-206-0386 with questions or for pictures ......$18,000.00 OBO. Must sell!

Used Weldco-Beales 410 casing driver. Good condition .............................$8,500. R1000 Atlas casing driver. Barely used. All hyd. hoses and controls ........$23,000. 406-223-2081

35 CASING TOOLS

HERCULES COMPRESSION Screw Compressor Rebuilding PD Blower Rebuilding • Separator Filter Sales • Coupling Insert Sales

Serving the Air Gas & Refrigeration Industries Specializing in 2 Stage Compressor Repair

Call for Quotations & Tech Support Mark Chittenden Cell 860-262-3888 • Home 860-510-0744

Brand New Holte Casing Driver. Model 140, set up for 3-1/2” drill rod................ .. ..................................... Asking $23,500. Used Holte Casing Driver. Model 140, set up for 4-1/2” drill rod. Includes cylinders and oiler ................Asking $18,500. 715-526-5075

BE-20W ´79 - 3 line, catheads, 4” ,5”, 6” tools. Very clean. Second owner. Chevy truck. $24,000 or trade for property in North Florida. 407-808-5735 or 386-775-2031

Anderson Equip. Sales & Service Used and Rebuilt IR and Sullair Air Ends. Exchange or rebuild yours. Contact Tom Ph 801-243-4480 Fax 801-944-3514

55 Mill Rock Rd. West • Old Saybrook, CT 06475

[email protected]

Rental Supply Co.

Holte Casing Driver includes, complete installation package. Holte Casing Drivers are available in 5 sizes.

LeROI Compressor Specialist

Bucyrus Erie 24-L, mounted on a GMC Brigadier, propane engine. Bucyrus Erie 28-L. Call 808-478-7112. 22 BE, 3 line, loaded on F700 Cummins diesel, you mount auto hoist. Rig powered 4 cyl. gas. Cable and tools ..$9,800. Call 800-253-1451. Cable Tool well drills. Different kinds and prices. BE, 31 Stone, Cylone & Keystone. With tools. Ready to drill. 501-344-2292 or 501-230-0833.

New & Used LeROI Parts We Rebuild LeROI Compressors

45 COMPRESSORS Sullair Air Compressor Combo 2007. 1,000 hrs.1150 CFM – 350 PSI & 900 CFM – 500 PSI air aftercooler. $115,000.00...........450-577-2990

1984 KOBELO - 600 CFM Asking $6,500 OBO. 307-322-2392

Rental Supply Company Duane Cook 2906 Hwy 50 Grand Junction, CO 81503

800-786-5318 970-242-7905 Fax: 970-523-0747

R & R DRILLING INC.

MEGAGROUP INC.

800-874-3907 423-626-5302/Fax 423-626-1232 E-mail: [email protected]

BETHLEHEM PA 18017 TEL: 610-867-6951 FAX: 610-867-8933

DISTRIBUTOR OF “ELGI” COMPRESSORS  IMMEDIATE DELIVERY OF

33 CASING HAMMERS 22-W Series 3, CAT power. Mtd. on 2005 Kenworth T-300, 260 HP Cummins 6 spd., PS, AC, 647 mi., 48 hrs. We have all the manuals, pipe, trailers, and all you need to start your business. This is a rare opportunity to get started with excellent equipment ..............Looking for $99,000. All inquiries, ask for John @ 1-888-4-BUXTON. Mail all inquiries to: Buxton, P.O. Box 900, Exeter, NH 03833

BRAND NEW AIR ENDS ORIGINAL SRM PROFILE.

Aardvark 1220 hammer. Great shape, low time ............$8,500 OBO. 208-772-4004

Atlas Casing Hammer 2000. Rebuilt. $12,000. 208-776-5322

(2)-22W’s and (1)-20W All refurbished, tools included. Call 570-470-2354. 22 BE, 3 line, diesel up & down, hyd. outriggers, cables and tools. You mount available casing hoist.................$15,500. Call 800-253-1451.

 20-12 TWO STAGE 750/350, 900/350, 1100/350

 SECOND STAGE OF 20-12

DISTRIBUTOR OF SULLAIR COMPRESSORS

INGERSOLL-RAND AIR COMPRESSORS NEW & REBUILT HR2’s - HR2.5 AIRENDS IN STOCK

 10, 12, 16, 20, & 25 SERIES

SINGLE STAGE - MANY CFMs

 REPAIR PARTS: INPUT SHAFTS, GEAR SETS, SHAFT SEALS, WEAR SLEEVES, ROTOR SETS THERMAL VALVES

 MANY OTHER PRODUCTS

NO AIR END EXCHANGE NO REBUILTS

SCHRAMM DISTIBUTOR

GHH – RAND DISTRIBUTOR OF GENUINE GHH RAND PARTS

WORLD WIDE SHIPPING BE 22W 3 line, 6 cyl. gas, 2007 trailer, Lincoln 250 welder, cutting set, 6 & 8 in tools. West Colorado. $15,000....... 970-379-8185 70 |

N AT I O N A L DRILLER October 2011 www.nationaldriller.com

LARGEST STOCK OF SULLAIR & GHH COMPRESSORS AND PARTS IN THE WORLD SULLAIR 750/350 TO 1350/500 GHH 204/128 AND CF 1000

Classified Advertising Deadline

DECEMBER 2011 ISSUE November 1, 2011

45 COMPRESSORS (2) New Mesabi Compressor Oil Coolers – NEVER USED

2006 Geoprobe 5410 Truck Unit 630 hrs. Excellent condition. Mtd. on 2007 F-350 4x4 Lariat 7x12 Cargo Trailer $45,000...........601-310-9831

• Sized for Sullair 1350/350 – 1150/500

65 DRILL PIPE DRILL PIPE - IN STOCK WELD-ON TOOL JOINTS

I WANT TO BUY NEW & USED DRILL PIPE

RENE HENDON 281-260-0880

RENE HENDON 281-260-0880

Drilling Products DrillingProducts.net

• 500 psi pressure rating

281-835-8862 Phone 281-835-3850 Fax New Water Well Drill Pipe Aluminum Steel

Contact Aaron at Keystone Drill Services, LLC

30 jts. 20 jts. 13 jts. 26 jts. 60 jts.

800.221.0586

2 7/8" OD x 20' 2 7/8" OD x 20' 3 1/2" OD x 15' 4" OD x 20' 4 1/2" OD x 20’

w/ 2 3/8" IF w/ 2 3/8" FEDP w/ 2 7/8" IF w/ 3 1/2" IF w/ 2 7/8" IF

60 jts. 50 jts. 50 jts. 60 jts. 50 jts.

3 1/2" OD x 20' w/ 2 3/8" IF 3 1/2" OD x 20' w/ 3 1/2" IF 4 1/2" OD x 20' w/ 2 7/8" IF 4 1/2" OD x 20' w/ 3 1/2" REG. 4 1/2" OD x 25' w/ IR-T4

Subject to prior sale. INQUIRE FOR ALL YOUR STEEL & ALUMINUM DRILL PIPE NEEDS.

ext. 242

50 CORE DRILLING LONGYEAR 34 CORE Drill - Int’l TRK MTD., 20’ Angle/Vert mast, Auto chuck, 3-7/8” head, Hyd wire line, hoist, 353 Detroit DK ENG, Bean 35 pump w/Deutz. HQ & NQ Rod also avail. 702-521-9641.

55 DETECTION EQUIPMENT

57 DIRECT PUSH SUPPLIES The company S & K is active for many years successfully with radiästhetischen water finding methods. We would want with pleasure in future this service also interested drilling enterprises from the areas: Water drilling, Gas drilling, Geothermal drilling for a longer-term cooperation offer. You can receive info about us under:

Web Site: www.brunnenbohr.at E-mail: [email protected]

56 DIRECT PUSH DRILLS

Rigs & Tooling @ EARTHX.COM

Manufacturer of Pre-Pack Screens ♦ Standard Pre-Pack When You Would Set A Traditional Well ♦ Economy Pre-Pack When Cost Is A Factor

♦ 20% Open Area High Yield Pre-Pack For Use In Low Yield Wells

♦ All Stainless Steel Pre-Pack

Bottleneck Pipe 47 - 1-3/4" x 10' 43 - 2" x 10' w/PH6 14 - 2-3/8" x 5' 32 - 2-3/8" x 30' w/2-3/8 IF 25 - 2-7/8" x 20' w/2-3/8 Reg 52 - 2-7/8" x 20 w/Hydril 11 - 2-7/8" x 20' w/2-3/8 FEDP 5 - 2-7/8" x 20' w/2-7/8 FEDP 6 - 2-7/8" x 25' w/May FH 111 - 2-7/8 x 30' w/-2 3/8 IF 13 - 3" x 5' 41 - 3-1/2" x 15' w/2-7/8 IF, New 6 - 3-1/2" x 20' w/2-7/8 IF 23 - 3-1/2" x 20' w/NC35 181 - 4" x 20' w/4FH 14 - 4" x 30' w/3-1/2 XH 4 - 4-1/2" x 15' w/4-1/2 IF 92 - 4-1/2" x 23' w/4-1/2 FH 3 - 4-1/2" x 20' w/4 IF 17 - 4-1/2" x 30' w/4-1/2 IF 10 - 4-1/2" x 30' w/4-1/2 IF 10 - 5" x 30' w/4 IF 6 - 5-1/2" x 22' w/6-5/8 Reg 22 - 5-1/2" x 22' w/5-1/2 Reg 13 - 5-1/2" x 30' w/5-1/2 FH 15 - 6-5/8" x 30' w/6/5/8 FH 112 - 6-5/8" x 30' w/6-5/8 FH 122 - 6-5/8" x 30' w/6-5/8 FH 1 - 6-5/8" x 40' w/6-5/8 FH 37 - 7" x 30' w/6-5/8 IF Mod 47 - 9-5/8" x 30' w/DI22 5 - 9-5/8" x 40'

For Aggressive Groundwater Environments

♦ Non-Metal Pre-Pack When Metal Components Are Not Compatible

♦ Annular Seals Foam Bridges, Bentonite & Quick-Sleeves

♦ Multiple Sizes Available *** A Johnson Screens Distributor*** **We Stock Geoprobe® Compatible Supplies & Tooling** *Proactive® Pumps Master Distributor*

Toll Free 1-888-240-4328 Phone: 1-609-631-8939

♦

Fax: 1-609-631-0993

ectmfg.com ♦ proactivepumps.com ♦ torquerplug.com

probetools.com

Elevators, Drill Collars, Swivels Bits, Subs, Rotary Tables

REX MCFADDEN LTD PH 806-791-3731 E-mail: [email protected] 7” O.D., .498 wall x 30 ft. x 8-1/2 full flow, PXB 8-1/2” O.D. x 6” I.D. tool joints. 1,500 ft. Slightly used. Also Misc. Reverse drilling equipment available .........Call for info at 760-342-2603.

Used T3 rod 4-1/2 x 3-1/2 API. Used T4 rod 4-1/2 x 3-1/2 API. Call 570-470-6323 for details.

(35) - Used 4-1/2” x 20’ w/3-1/2” reg. tool joints............Asking $400 each. Call 715-526-5075. 38 Sections 4-1/2” x 4-1/2 IF joint, 20´ sections, bottle neck. $600.00 per section 803-712-0500 600´ 2-7/8” IF x 25´ w/slots ......@ $13/ft. 600´ 3-1/2” API x 5´ w/slots .....@ $13/ft. 600´ 2-7/8” IF x 15´ w/slots ......@ $15/ft. 1,000´ 2-7/8” IF x 20´ w/slots B.N.@ $15/ft. 559-905-0289

REVERSE DRILL PIPE - 1,800' of 6-5/8" x 20' Hacker Pipe ....$109,517. 530-674-5861

70 DRILL RODS 600´ 4-1/2” flush x 3-1/2 IF, 20´.$300 ea. 5”, 6”, & 8” drill collars...........$1,000 ea. Hole Openers and Bits .....Call for info. 772-468-3108

600 feet of 3-1⁄2” drill rods IF – still have the paint on them. 319-721-7902 NWJ Rods - (32) 5 FT. (11) 10 ft. Subs & hoisting plug. 300 lb. Hammer. Very good condition..............................$4,400. 813-363-1600

71 DRILLING EQUIPMENT Parting out drill rigs. T650CP, 650SSCP, 700CP, D40K Driltech. Also engines available. Call for price and availability..................Call 814-445-4030.

D L O S

2000 D.D. Rig Complete, Mounted on 4 axle Crane Carrier. Several Derricks. 1-127# Emsco. 350,000# Scoping. 9 Ft. Back Up On Substructure. 325-672-4378 1979 CP 650 SS mounted on a Crane Carrier. 900 CFM at 325 PSI GHH Compressor Injection Pump Oiler. Lots of repairs and upgrades done, working daily. 150 Feet of 4-1/2" rod in carousel included. $89,000. Call Shawn at 507-281-2840 for more information.

www.nationaldriller.com N AT I O N A L DRILLER October 2011 | 71

71 DRILLING EQUIPMENT

SkyRex Water Well Elevators

HOWARD - TURNER MANUFACTURING CO. Designers and builders of quality equipment and tools for the energy industry and progress.

GENERAL OFFICE AND PLANT 2545 PALM DRIVE, SIGNAL, CA 90755 562-424-1655 [email protected]

SERVING THE INDUSTRY FOR 57 YEARS Rotary tables, swivels, master bushings, brake rims and pads. Replacement parts for all Howard-Turner and Wagner Morehouse drilling & pulling rigs

2” thru 36” Also Light wt. PVC Elevators Now Available!

Rex McFadden 7931 19th Lubbock, TX 79407

Ph 806-791-3731 Fax 806-791-3755 www.rexmcfadden.com

80 EMPLOYMENT

JON T. ERRICKSON

75 ELECTRIC MOTORS

Drill Fabrication & Machine Est. 1977

FOR SALE:

WANTED 20 to 500 hp vertical hollow shaft pump motors. Good or bad. Will pickup. 800-541-1562

FOUNDATION RIGS

76 ELEVATORS

LDH - 60, 80 & Parts Texoma 650 Watson ED-7 Crane Mounted – Hughes 200 6V71 Detroit Hain 4-71 & 3531-3 ROCK DRILLS & COMPRESSORS DM-4 Big Hole 24-30” Tier III Engine (2) Gill Beetles (Both have Cabs) Sullair 900-350, Air End.

BOOSTERS (2) WB-12 CAT Powered 800 PSI

DRILL ROD 200´ - 28” OD - 8-5/8” 180´ - 26” OD - 8-5/8” Various Lengths of 20” & 16” OD 30” Pipe - 3/4” wall, 10 ft. min. 240 lbs/ft. $95.ft.

J&K Tool Company, Inc. - Kwik Klamp 1 & 2 - Elevators for PVC (1”-16”) - Heavy Duty PVC Elevators (4”-8”) - Flush Joint PVC Pipe Clamps (4”-24”)

www.jktool.com [email protected] tel 320-563-4967 fax 320-563-8051

SEMCO INC. 1” thru 16” Elevators All steel with safety latch. 800-541-1562 Fax 719-336-2402 www.SEMCOoflamar.com American Express, Visa & Mastercard. Ship by UPS same day.

HAMMERS & BITS IR 112 - 12” -15” (Used) IR DHD - 22” - 30” NUMA 240 - 22” - 36” BULROC 180 - w/17”, 18” & 20” Bits (50) SD-3 Bits 3-1/2”-4” NEW. $190 ea. Ingersoll Rand 52” Cluster Drill *** WE REBUILD HAMMER BITS ANY CONDITION - UP TO 48” ***

MISC FOR SALE ChemGrout CG 600 NEW ChemGrout 550 (400 psi) Moyno 4J Progressive Cavity, trailer mounted 4-71.

FOR RENT ICE Leads w/26” Twin Rotary & Tophead Soilmec 312 w/ Twin Rotary 26” Drive Casing up to 155” Diameter Augers & Core Barrels up to 144” Compressors up to 1170 CFM - 350 PSI ChemGrout Plants Crawler Cranes up to 70 Ton Hydraulic Cranes up to 75 Ton LoDril LM-30

800-691-9166 jonrents.com 72 |

ELEVATORS! FOR 1/2” to 19” CASING 800-523-5760 540-635-7753 FAX 540-635-6352

TRIDENT TOOLS INC. www.tridenttool.com 1” to 12-3/4” & 5-1/2” to 12-3/4” with automatic latch All in stock have been tested and rated.

Larry’s Welding Service Phone: 620-356-3619 Fax: 620-424-1495 Ulysses, Kansas

N AT I O N A L DRILLER October 2011 www.nationaldriller.com

F/T Exp Driller TH60 - Clean DMV-CDL req’d. Drilling Contractor (36 years in business) seeks career-minded person for year-round work in California Fax resumé 415-927-1723.

NJ LICENSED DRILLERS Immediate openings Call 888-996-DRILL. F/T experienced air & mud drillers wanted. We are a fifty year old drilling business, located in SC. Top pay, benefits & performance bonuses. Fax resumé to 803-926-5401. Office 8-5 M-F 803-926-5402

Full Service Professional Water Well Company in South/Central Texas seeks Licensed Driller w/5+yrs of exp. Air & Mud Rotary. Pay dependant on exp. Benefits available. Call 830-981-8979 or fax resumé to 830-755-8965 or e-mail: [email protected].

DRILLER Well established, Eastern Shore of Maryland based elevator-company, has an IMMEDIATE opening for an experienced Driller. Must be experienced with use of Cyclone 30 cable tool, Texoma Auger machine and inside rail mounted electric and hydraulic machine to drill elevator well holes for hydraulic elevators. In addition to extensive experience on the above type of equipment, all applicants must possess a VALID current CDL license, current physical card, able to pass drug screening, be willing to travel and work out of town, and relocate if necessary to be based out of Maryland Delaware area. In return you will receive competitive salary commensurate with experience, excellent company benefits (401K, Medical, Dental, vacations, etc.) and a family oriented work environment. Please forward resumé salary history, and references to: Chesapeake Drilling Corporation P.O. Box 412, Salisbury, MD 21803 Attn: Human Resources 800-787-0436 x142 Fax: 410-341-6277 [email protected]

Field Supervisor (hands-on) Employee Owned NJ contractor seeks experienced individual to work in NE US. Pump systems; well drilling; wellpoint systems; troubleshooting. Driller's license & CDL a plus. Travel req. Excellent salary/benefits. Resumé to [email protected]. Drillers Wanted: Growing Maryland based company seeks experienced air/mud drillers. $60K+/yr, health ins., 401K, paid vacation, holidays, and performance bonuses. Must have CDL Class B Lic. Possible help w/relocation. Contact Adam at 301-776-8370 or e-mail at [email protected]. DRILLERS & HELPERS WANTED For Geotechnical Co. in S. FL. Driller must have CDL Class A/B. Excellent Pay / Bonus. Excellent benefits, Med. Ins., Vacation/Sick pay & Retirement. Please call 561-202-5455 or fax resumé to 561-640-0409. AEGL Drilling Division is Hiring Experienced Drill Rig Operators: SR30-Solimec, IMT AF-110, IMT AF-130. Call Melissa Cruz 330-659-7106 or E-mail Resumé: [email protected] EXPERIENCED DRILLERS NEEDED Immediate openings available at Southern California drilling company. Hollow Stem Auger experience a must. Valid Class B CDL and clean driving record required. Mud Rotary, Rock Coring, OSHA 40 Hours a plus. Top pay and benefits package. Prevailing Wage Work Available. PLEASE CALL: 562-988-2849 OR FAX RESUMÉ: 562-988-2859 OR VISIT OUR WEB SITE: jetdrill.com

Environmental Drillers – Experienced (5 yr. min.) Air Rotary Casing Hammer, Air/Mud Rotary, Hollow Stem Auger. Clean CDL required. 40 hr. OSHA training a plus. Some travel required. So. California. Pay commensurate with experience. Full benefits. Call 714-939-6850. E-mail: [email protected] Successful candidate will have the ability to operate a T-4 Atlas Copco Drilling Rig. Must be experienced with water well and blast hole drilling as well as have some mudding experience. Welding skills are a must. Must be willing to become NYS certified. Must have a minimum Class B license Commercial Driver’s License with Hazmat and tank endorsement. Must be able to work independently as well as part of a team. Some out of town work as required. Salary depending on experience. If interested, please fax or e-mail your resumé to 315-696-8899 or [email protected].

NJ Drilling Company seeks full and part-time employment for Geoprobe Operator and licensed NJ Well Driller. Benefits, flexibility, and salary commensurate w/experience. Call 888-433-4877. NEED Licensed TEXAS driller or out of state licensed driller to apply for Texas license. Texas Hill Country Area. 70 miles NW of Austin. $25-$30 an hour. Contact Brian 817-296-4962. GEOPROBE OPERATOR & DRILLER NJ Geoprobe/Drilling co. seeks NJ/ Licensed Probe Operators & Drillers to run all new probe & auger equipment. Great work envir., pay and benefits. 732-642-0788 or 609-730-1205.

80 EMPLOYMENT Full Service Professional Water Well Company in South/Central Texas seeks Licensed Pump Installer 5yr + exp. in large Submersible and Vertical Turbine installation. Pay based on exp. Benefits available. Call 830-981-8979 or fax resumé to 830-755-8965 or e-mail: [email protected]. Central NY Drilling & Geothermal Company seeking full-time experienced drillers. Knowledge of T3W Rotary with Air/Mud Drilling, Drivers License, CDL A or B, Drillers License, 40 Hr. OSHA a plus, Travel Required. Pay based on experience. Ph: 607-432-8009 Fax: 607-263-2492 E-mail: [email protected] NC Geotechnical Driller Needed North Carolina engineering firm seeks motivated lead driller. Must have at least 6 years geotechnical/environmental drilling experience in hollow stem, mud rotary, SPT sampling, wireline coring, monitoring well installation and abandonment. Must have current N.C. Class A drilling license, Class A CDL. OSHA 40 Hour a plus. Salary equal to experience, O/T, paid health ins., vac., 401K, HSA and other benefits. Criminal records check, license check, drug test, fit-for-duty test, and reference checks will be performed on candidate. Please contact Paul Weaver at [email protected], 919-732-8500 to apply or fax 919-732-6676. Geothermal Drilling Company located in Morrisville, PA, seeks experienced geothermal driller. Must have valid CDL license. Excellent benefits and pay. [email protected] 215-295-2823 Hook-up Foreman Wanted: Growing MD Drilling Company seeking installer with commercial experience manifolding vertical loops. Excellent pay and benefits. Contact Brett @ 301-776-8370 or e-mail: [email protected].

MEMO-OMEGA MFG, INC. 722 South Kimball Avenue Southlake, TX 76092

D

E

U

T

Z

Engines and Parts CALL 877-236-9945 FAX 800-541-6220

See our ad on page 26.

Web Site: www.memoparts.com

HAMMERS!

E-Mail: [email protected]

94 FINANCING 102 HAMMERS

CS POWER HAMMER

CAT 51 HP ENGINE TO RE-POWER 20W B-E WELL DRILL.

B-E WELL DRILL.

TWIN-DISC P.T.O.

PH. 800-767-3745

TRIDENT TOOL INC. www.tridenttool.com

Leasing & Financing

800-351-2120 www.4leases.com 98 GEAR DRIVES 3” ~ 36” HAMMER DEEP FOUNDATION SHOW OCT. 19~21 (BOSTON) BOOTH #325 The Gear Drive Specialists, Since 1952 "When Quality Counts"

Phone 559-846-6509 Fax 559-846-6587 www.killingsworthgear.com

99 GEOTHERMAL RIGS/TOOLS

COMPLETE WITH ENCLOSURE &

540-635-7753 FAX 540-635-6352

CA P I TA L

CAT 61 HP TURBO ENGINE TO REPOWER 22W

800-523-5760

ALTERNATIVE

82 ENGINES BUCKEYE DRILL COMPANY CATERPILLAR ENGINES

IR Style Mission Style Halco Style 3” to 24”

(2) Geothermal skid steer mounted drills. Mid-western Machinery Company. $6,000 each. 734-279-2059

INVENTORIES IN NEW YORK & LOS ANGELES

BESTMA U.S.A. INC. 1-888-HAMMER-K (1-888-426-6375) TEL) 631-629-4291 ASK FOR JAY YOON [email protected] WWW.BESTMA.COM

www.buckeyedrill.com

101 GROUTERS

GROUT PUMPS NEW

Classified Advertising Deadline

NOVEMBER 2011 ISSUE

September 30, 2011

GROUT PUMPS USED

GROUT PUMPS CUSTOM

(LEASING AVAILABLE)

800-851-0436 R-2 Mfg., Inc. www.nationaldriller.com N AT I O N A L DRILLER October 2011 | 73

G.D. 5x6 & 7x10 WHEATLEY 6x6 & 5x10

108 MAGNETS

104 HYDRO FRAC EQUIPMENT

RETRIEVING M AG N E T S ! 1-3/4” to 12” Dia. 100 to 1000 Lbs.

800-523-5760 540-635-7753 FAX 540-635-6352

TRIDENT TOOL INC. www.tridenttool.com 110 MISCELLANEOUS 105 INJECTION PUMPS

RENE HENDON 281-260-0880 Ph. 972-897-9607

www.summitpowerandsupply.com Liberty Hill, Texas

MUD PUMPS CE D175, 6-3/4” x 12”, 8V71, $25,000. GD FFFXF, 4-1/2”x5”, No Pwr, $6,000. GD FGFXG, 5”x6”, No Pwr., $8,500. GD FGFXG, 5”x6”, Diesel, Skid, $11,000. GD 5” x8” Air Powered, $10,000. GD FCFXX. 5”x8”, Detroit 471, $19,000. GD FDFXX, 5” x 8”, $12,000. GD FDFXD, Detroit 671, $25,000. GD FOFXO, 7-1/4”x10”, $18,000. GD FYFXD, 7-1/2”x10”, Diesel, $30,000. GD FZFXZ, 7-1/4”x12”, Trailer, $15,000. GD FKFXK, 7-1/4”x14”, Series 60 $38,000. Gaso 1800, 5”x6”, Diesel, Skid, $10,000. Gaso 1743, 7-1/2” x 10”, No Pwr., $15,500. New 5x10 Hyd. Gear Reduction Box, $3,250.

AIR COMPRESSORS

DU-ALL Injection Pumps All parts in stock and available for shipment. Overnight delivery available. Call your local parts supplier or Fred’s Water Service, Inc. at (440) 259-5436 with your order or questions.

Fred’s Water Service, Inc. 2638 Townline Road Madison, Ohio 44057 Phone (440) 259-5436 w w w. f w s e r v i c e . c o m Fax (440) 259-4795

Construction Sound Wall. Removable Engineered for 75 MPH 450LF x 24’ .........$75,000 760-342-2603

RIG PARTS s r

r

115 MUD PUMPS

107 LOG & TEST EQUIPMENT

500HP VFD Test Pump Trailer Emergency pump controls. Complete unit with VFD, PLC, 5 Ton A/C, Enclosed Trailer, Cabeling, lighting. Can modify if needed to meet your spec . . .$39,000. 760-342-2603

109 LIGHTS

Light Towers Phone: 540-982-8001 Fax: 540-342-0546 [email protected] NEW, USED, RENTALS  (4) 1,000-Watt Lamps  20 KW Generator (L20)  Telescoping Mast

www.nolanddrilling.com 74 |

Ariel JGQ/2 Air Boosters, CAT, $85,000 Ariel JGJ/2 Air Booster, CAT C15, $140,000 CIP PHT Air Booster, CAT, $85,000 Gardner Denver MDY Booster, $40,000 2006 Ingersoll-Rand XHP1170WCAT Sullair 750/250, Series 60, $20,000 2007 Sullair 1150XH/900XHH (500 psi) 1994 Sullair 900/350 Module, $17,500

Hydraulic drive mud pumps - small & lightweight - new aluminum model 7-1/2” x 10” duplex pump fits in the place of a 5” x 6” and weighs half as much - pumps 300 gpm at up to 800 PSI. Mono pumps and triplex pumps also available. Call 903-725-6978 or visit our web site www.centerlinemanufacturing.com. U.S. Pat. #6,769,884 and others pending.

BRAND NEW PUMPS IN STOCK!! GD 4x5................................Call for Price GD 4-1/2x5..........................Call for Price GD 5x6, air drive FG-AG ....Call for Price GD 5x6, gear drive FG-FXG ..Call for Price GD 5-1/2x8..........................Call for Price GD 7-1/2x8..........................Call for Price GD 5-1/2x10........................Call for Price GD 7-1/2x10........................Call for Price GD 4x5 Tee Triplex.............Call for Price GD 5-1/2x5 THI Triplex.......Call for Price Also New Centrifugal Pumps in stock. REBUILT PUMPS!!! All sizes and brands available. Gardner Denver, Gaso, Wheatley, Oilwell, Worthington and many more. We have over 300 pumps in stock. Call for prices. New!!! Hydraulic GROUT PUMP $3,500. We rent mud pumps and diesel power units. Power units available: Detroit diesel 671-471-371-353, also new CAT units. We pay cash for used & surplus pumps. We manufacture mud pump parts. Armstrong Machine Co., Inc. 800-831-4527 / 712-335-4131 Fax: 712-335-4565 E-mail: [email protected] www.armstrongmachine.com

N AT I O N A L DRILLER October 2011 www.nationaldriller.com

King 3” RC Swivel, $3,000 Many Driltech DH-1 Parts, Pwr. Head, Etc. Braden PD12C Winch, 12,000 Lb., $4,500 Gearmatic H35 16,000 Lb. Winch $4,500 Ingersoll-Rand Sandreel, $3,500 TH60 Cotta Box, $5,500 TH60 750/250 Cooler Assy, $3,500 TH60 / T3W Feed Cylinder, $3,500 Myers 9 GPM Pump,w/o Motor $750 FMC Bean 18 GPM Pump, $2,000 CAT 25 GPM Pump, $2,000 FMC Bean 435, 35 GPM, Hyd. Dr. $4,500 New Gears for Top Ring Gear GD 7-1/2” Table Failing 5-1/4” Table, $4,500 Hacker 6-1/4” Table, $3,500 SpeedStar 8-1/2” Table, $6,500 Howard Turner 12-1/2” Table, $12,500 CAT D333 175 HP Pwr. Unit w/Clutch, $4,000 Cummins QSK19C 600 HP Engine, $20,000 Unused 3-5/16” X 23’ Fluted Kelly’s, $2,900 New MS Series Break-Out Tong, $1,250 Web Wilson Break-Out Tong, $1,250 (3) Portadrill Hydraulic Outriggers Rausch 512 Drill Pipe Spinner $4,500

PULSATION DAMPNER K-10 type, completely rebuilt w/new expendables. 405-427-1080 4-1/2 x 5 GD mud pump ........$4,000.00. 5 x 6 GD mud pump completely rebuilt with Clutch...............................$6,500.00. Mayhew 1000 rotary table, gear cases and mast Cheap. Bobby 239-872-5955.

GD 7-1/4 x 14 FXN, unmtd ........$25,000. National 7-1/4 x 15 C250 w/twin Detroit G-71’s skid mounted ..................$19,500. GD 7-1/4 x 12 FXZ unmounted....$9,500. Gaso 5x10 1550 skid mounted with Cummins 4BT.............................$19,000. Gaso 5x8 unmounted. 405-642-2812

THUNDERBOLT Hydraulic Powered Duplex Mud Pump 7-1/2 x 12, 300 GPM 7-1/2 x 18, 400 GPM, 400-600 PSI 4’ x 88” x 41”, 2,800 Lbs. Skid or Trailer Mounted Moyno Pumps Available We will save you money. Go to web site to watch and listen. It’s no banger! Call Ken 903-340-5829. [email protected] www.kenscustommfg.com

5 x 8 Wilson Snider mud pump...$5,000. 7-1/2” x 12 GD mud pump rebuilt, 24 hp International Cummins skidbed..$50,000. 559-905-0289

250 Sandmaster Pumps with hydraulic adapters starting @ $2,315.00. October Only Single Cone 5” Desilter Micron cut to 25 Microns

DLC Single Standard Shaker $6,156.00 October Only Contact The Double Life Corporation for more details Phone: 405-789-7867 Fax: 405-792-2202 Toll free 1-877-888-7867 E-mail: [email protected] www.doublelifecorp.com

Classified Advertising Deadline

JANUARY 2012 Trailer mounted portable mud-pit with 5 x 6 air mud pump, air drive Mission desander pump and 4 x 4 shaker air drive . . . . . . . .$13,000.00. Call Steve 775-530-5954.

ISSUE December 1, 2011

116 MUD SYSTEMS

1753 Attaberry Rd. Sequim WA 98382

SEMCO INC. 719-336-9006/800-541-1562 FAX 719-336-2402 See our Ad on page 37. [email protected] www.SEMCOoflamar.com 2011 MODELS IN STOCK

(360) 477-0251 [email protected] “Built by well driller, for well drillers”

I WANT TO BUY PULSTAR SMEAL - SEMCO PUMP HOISTS RENE HENDON 281-260-0880

See Page 3.

760-961-1160

THUNDERBOLT 500 GPM MUD SYSTEM One 4’ x 5’ double screen shaker with 3 micro sand cones. One 1,500 gallon separating tank. Two 3 x 2 centrifugal pumps. One 165 Hp Perkins diesel with triple hydraulic gear pump. One 100 gallon hydraulic tank with one 100 Gpm radiator cooler. One 60 gallon diesel fuel tank. Smaller units available. We can build what you need. We can furnish system with a Thunderbolt duplex mud pump. Call Ken for factory direct prices, no middle man or salesman. Visit ´Mud Systems´ on our web site www.kenscustommfg.com [email protected] 903-340-5829

117 PERFORATORS MILLS Knife Type Perforators For Sale or Rent 4” thru 20” - prices available on request; BLADES made 4” thru 20”. SPIDERS & SLIPS 2”-12” Montana 406-580-2818

Allen Perforator - 6 ft. cutting area for steel casing. 4” -18” inch. $30,000......559-905-0289

3 ton Smeal pump truck mounted on a 1990 GMC 4 x 4 dually with utility bed. 350 and an automatic, 116,000 miles . . . . . . . . . . . . . . . . .$9,800.00. Call Steve 775-530-5954.

Smeal R12, 44K Lbs., '96 Int'l 4900 ...................................................$55,000. Smeal 10T, '89 Ford L7000 ...... $33,000. Smeal 10T, '88 GMC Topkick ... $20,000. SpeedStar WS-50, 50 Ton, GMC, ...................................................$45,000. 972-897-9607 Smeal 10-T. SpeedStar pump rig. Swinger pump rig. Wilson pulling rig, truck mounted, 471 Detroit power. Call 808-478-7112.

CYCLONE F40 PUMP HOIST Mounted on 1986 GMC 1 ton 4x4, diesel. Pipe rack, jacks, full length toolboxes, hydraulic pressure washer with tank. $9,000.00 Call Larry at 248-673-8842.

2007 Pulstar P10000 - 2 & 3 part lines. Sandline, rear hyd. outlets. 3 jacks, remote control. Mtd. on ´07 Red F550. 6.0 dsl, 6 spd. PW, AC. 16,700 low miles. Like new. $64,900 .503-668-6913. 1992 Int’l. 4700 4x2 DT466, 5x2 trans., 11 ft. service body, 63,000 mi. Cyclone F-100 Pump Hoist. Pipe racks, outriggers. Ready to Work!..$15,000...815-433-6169.

125 PUMP HOISTS

5T & 8T SMEAL RENE HENDON 281-260-0880 ´89 Ford 1 ton, low miles, 5T Smeal hoist, sandreel, new utility box...$16,000. E-mail for photo & info [email protected].

2007 P100000 Pulstar Pump rig with main, sand, tong, tool lines. $229,000.00......760-342-2603

S4000 Pump Hoist, 8,000# cap, 35' telescoping mast, 30 gal oil tank, hydro pump, 5T safety hook, hydro controls & variable speed engine control....$14,245. S6,000 Pump Hoist, 16,000# 3L, cap, 35' telescoping mast, 30 gal oil tank, hydro pump, 5T safety hook, hydro controls & variable speed engine control ..............................................$16,445. S8,000 Pump Hoist, 22,000# 3L, cap 36' telescoping mast, 30 gal oil tank, hydro pump, 7T safety hook, hydro controls & variable speed engine control....... ...................................................$20,845. S10,000 Pump Hoist, 30,000# 3L, cap 40' telescoping mast, 30 gal oil tank, hydro pump, 9T safety hook, hydro controls & variable speed engine control ..$28,545. S12,000 Pump Hoist, 48,000# 4L cap, 44' telescoping mast, 6,000# tail out line, 72 gal oil tank, hydro pump, 11T safety hook, hydro controls & variable speed engine control ........................... $32,945. S15,000 Pump Hoist, 60,000# 4L cap, 48' telescoping mast, 6,000# tail out line, 72 gal oil tank, hydro pump, 13T safety hook, hydro controls & variable speed engine control ...........................$40,645. S20,000 Pump Hoist, 80,000# 4L cap, 40' telescoping mast, 6,000# tail out line, 72 gal oil tank, hydro pump, 13T safety hook, hydro controls & variable speed engine control.............................$53,845. S25,000 Pump Hoist, 100,000# 4L cap, 40 telescoping mast, 6,000# tail out line, 100 gal oil tank, hydro pump, 15T safety hook, hydro control & variable speed engine control.................................$61,545. S30,000 Pump Hoist, 120,000# 4L cap, 40 telescoping mast, 6,000# tail out line, 100 gal oil tank, hydro pump, 15T safety hook, hydro control & variable speed engine control.................................$76,945.

New Equipment in Stock S6,000 SEMCO, 35', PTO, RC, PR, 2 Spd., Aux., Blue and white, 11' Bed, Toolboxes, 2011 Dodge Ram, 5500 6.7L Diesel, 6 Speed. Automatic, 4x4, White... ...................................................$77,598. S30,000, 56', PTO, BO, BC Outriggers, Cathead, 2 Spd., Sandreel, AB for SR, Aux., Oil Cooler, Light Kit, Power Arm, Power Tong Hook Up, Bed, Toolboxes, 2009 Sterling L8500 Cummins 10 Spd., AB, AC......................................$224,388.

Used Equipment in Stock M33 Jessen/Monitor, 1-PR, SB, 1995 Ford F-350, Gas, 5 Spd., 4x2, White ...................................................$18,900. M34 Jessen/Monitor, RC, PR, SB w/1992 GMC TopKick, 3116 Cat, 5 Spd .............................................$19,500. 5T Smeal, 1-PR, Flatbed, Toolboxes, 2004 Ford, F-650, Cummins, 4x2, White ..........................................$34,950. S6,000 SEMCO, 35', PTO, 2 Spd., RC, PR, Aux., Light Kit, 11' Bed, Toolboxes, Continued in next column.

Continued from previous column. 2008 Dodge 3500, 6.7 Cummins, 6 Spd., Stand., 4x4, Red ........................$52,585. S12,000H SEMCO, 48', 2 Spd., SR, Oil Cooler, Aux., PR, Light Kit, 16' Bed, Toolbox, Power Tong Hook Up, 2004 Int’l 4300, DT 466E, D, 6 Spd. ...$75,344. S12,000H, 44', HS PTO, SR, Oil Cooler, 2 Spd., 2-Aux., PR, BC Outriggers, Light Kit, 16' Bed, Toolbox, 2006 Int. 4300 DT466, Auto., Yellow..................$87,039. S15,000 SEMCO, 48', BO Cylinder, Cathead, Aux., 2 Spd., Power Arm, Power Tong Hook Up, 18' Bed, Toolboxes, 2007 Frt, Diesel, Automatic 5 Spd., ...................................................$82,572. S15,000 SEMCO, 48', HS PTO, SR, Aux., 2 Spd., Oil Cooler, Light Kit, Power Arm, 16' Bed, Tool Box, 2005 Chevy C6500, Cat. C7, 5 Spd., Allison Auto., White ..........................................$85,396. S25,000 SEMCO, 50', AS PTO, BO Cylinder, BC Outriggers, 2 Spd., SR, Power Tong Hook Up, 2-Aux., Oil Cooler, Light Kit, Power Arm, 20' Bed, Toolboxes, 2006 Int. 4300, 6 Spd ..............$127,000.

Up Coming Trades 1976 Chevy w/Walk-Neer WP-2 2004 Dodge w/S6,000 SEMCO 1985 Ford w/S15,000 SEMCO 2008 Dodge w/S6,000 SEMCO 2000 Freightliner w/S15,000 SEMCO

Contact us at 1-800-541-1562 for a list of our used equipment. Cyclone F-40 Pump Hoist Unmounted $3,000.00 815-433-6169 Semco 2003 S8000 - 2 spd. winch, PTO Remote, pipe rack. Mtd. on 1990 2.5 ton Chevy body, Gas, 5&2 spd - 36K miles. Good condition....$35K.....208-466-6439.

128 PUMP PULLERS EASY RISER PUMP PULLERS PROVEN: users worldwide pull pumps to 600 ft. at up to 35 fpm. LIGHT WEIGHT: user lifts only 42 lb. COMPACT: stores in only 2 sq. ft. ECONOMICAL: from $1,795 USD. VISIT US AT www.pumppuller.com Talcott Mountain Engineering, Inc. 860-651-3141

132 RIG EQUIPMENT MIDWAY RIG & SUPPLY, INC P) 325-653-3433 F) 325-658-1817 DRAWWORKS: UNUSED 15M85 & 10M BOTH WITH AIR CLUTCHES RIG FRAMES: UNUSED 10M,13M,15M, & 15M85 NEW FAILING 18” ROTARY TABLE, MAIN BEARINGS. NEW & USED HANDLING EQUIPMENT IN STOCK: TONGS-SLIPS-ELEVATORS NEW & REBUILT MIDWAY 8-1/2” & 12” ROTARY TABLES RIG PARTS

www.nationaldriller.com N AT I O N A L DRILLER October 2011 | 75

132 RIG EQUIPMENT

J W S Equipment, Inc. 3004 Bradford Drive Moore, OK 73160 Office Phone: 405-794-7334 Shop Phone: 405-794-3600 Fax: 405-793-1690 E-mail: [email protected] DUPLEX MUD PUMPS New, used or rebuilt Gardner-Denver 4x5 thru 7-1/4x14. Selected Gaso & Wheatley & Failing duplexes. New & used Pump parts. PUMP GEARS New G-D herringbone Eccentric Gear & Pinion Gear Sets for 14” FK-FXK & FN-FXN. Original O.E.M. surplus gears. SKIDDED & POWERED PUMP PACKAGES Gaso Fig. 1743 7-1/2x10 w/6-71 DD. FG-FXG 5x6 w/2-53 DD. GD FXZ 7-1/4x12 w/Mattco F.E. w/quick change caps w/DD 8V-71. COMPRESSORS Skid Mounted LeROI 256SDS Compressor Package w/DD 6V-71 diesel, V-belt drive, air receiver tank, fuel tank. Used/rebuilt LeROI 100S1, 100S2, 100SDS & 256S2. New & used parts for LeROI reciprocating compressors. G-D WCQ, WCG & WCH Part machines. MISCELLANEOUS New Mud Gauges & Shear Relief Valves for pumps.

133 RIG PARTS Chicago-Pneumatic, REICHdrill, Driltech rotary drill parts. 630-968-7795

MIDWAY 12 ROTARY TABLE SPEEDSTAR 8-1/2 TABLE GD FXD 7x10 PUMP PTO - HYD LEVEL JACKS RENE HENDON 281-260-0880 Parting out IR, Driltech, CP and other drills. Located in Kentucky. Harper Diesel & Machine Service PH: 606-464-8108

Foremost DR24 (Surplus) Parts Jaw Sets (16”-20”-24”) & Rings 800-691-9166 JONRENTS.COM

RIG PARTS! FRICTION WHEELS SHOCKS BEARINGS

CLUTCHES ETC.

800-523-5760 540-635-7753 FAX 540-635-6352

TRIDENT TOOL INC. www.tridenttool.com

WALKER DRILLING ! LOCATER ! Don’t Pass Up A Great Deal With Herb No Part Too Small, No Business Too Big Locating is our gig! [email protected] Fax: 817-598-1377 HERB: 817-771-8176 76 |

We’re the Experts when it comes to Denison Hydraulics for Your Drills. Pump and motor failure means costly down time for your business. That’s why Nova Hydraulics stocks remanufactured Denison Piston and Vane Pumps & Motors for your drills. We’re dedicated to keeping our customers up and running. In Stock for I.R. & Driltech: Feed Pumps, Rotation Pumps, Travel Pumps, Fan Acc., Head Motors, Fan Motors, Dust Collector Motors, Travel Motors • 25 years experience remanufacturing Denison Pumps & Motors • Denison Factory Trained • 250 H.P. Test Stand - 7500 PSI, 200 GPM Capacity • State of the Art lapping and cleaning equipment • Fast, responsive customer service • Extensive Denison cross reference information to OEM part numbers

HD Gardner Denver 1000, hyd. pulldown, 7-1/2” retractable table, 256 LeROI compressor, 5x6 Gardner Denver mud pump, 784 Spicer PTO air shift, 3 hyd. jacks (HD) heavy mast, Bean water injection, 300´ drill pipe & tools, mounted on International Eagle - 400 Cummins ....................................$95,000. 918-647-8926 or 918-649-8160. J. Grantham Drilling - Oklahoma

RIGS www.sunmachinery.com

THE SOURCE

Call us today for more information. 1-800-772-2118

Hundreds of used drill rigs for sale.

NOVA HYDRAULICS, INC.

Tel (516) 536-7375 Fax (516) 536-7317

6212 PARLIAMENT DR. INDIANAPOLIS, IN 46220

Sun Machinery Corp. [email protected]

317-322-0242 317-322-0247 (FAX)

RIG & EQUIPMENT PACKAGES FOR SALE ´77 Gardner Denver 2000 mounted on Carrier. ´81 Auto car pipe truck. Pipe bed w/slide and dolly. 2,000' 3-1/2 IF bottleneck 20' pipe; 4-6” collars 20'. ´73 Mack water truck, 80 BB w/Vac Pump.

www.novahydraulics.com

134 RIG SERVICE

Complete Repair Services We rebuild complete drill unit components. We are specialists in the repair & service of Failing chain feed drills & parts. • For sale: 3x4x13 Magnum pump rebuilt with mechanical seal. Fluid end all new. • For sale: 5x6 GD Pump, completely rebuilt to new both ends. Possibly deliver. Call or fax for listing.

317-839-7534/fax 317-838-9244

135 RIGS I WANT TO BUY DRILL RIGS RIG PARTS & MUD PUMPS RENE HENDON 281-260-0880

PTL Bit & Supply Co. 301-842-0075 ptlbitandsupply.com 1994 I.R. T4W 900/350 Rebuilt Rotary Head, 6,000 Original Hours, Cummins in CCC & on Deck, 300' Drill Steel, 6", 8" & 12" Hammers, Ready to Drill. $245,000 NEW I.R. Hydraulic Hammer Breaker $4,000 IR Double Motor Spur Gear Head $22,500 1991 Schramm T450 on Ford F900, 750/300, 300' of drill steel, tools. Ready to drill. $125,000 IR Four Hole Gear Box, 25' & 30' IR Carousels, Jacks, Pulldown Cylinders, Main Pump for Driltech, and other I.R. & Driltech Parts

Call Jack, Rob or John. 2008 SpeedStar 50K - mounted on 2009 Peterbilt 367 w/CAT C-15 Tier 3, 1050-350 air, 4x3 Mission centrifugal pump, 50,000 lb. auxiliary winch. Call 307-680-9901.

N AT I O N A L DRILLER October 2011 www.nationaldriller.com

D R I L L S

w w w. h i g r i g . c o m

Our Reputation Speaks For Itself.

Drill Rigs Cheap. (6) Mayhew 1000’s will part-out. GD, Midway, Badger, Failing, Portadrill w/5-1/2x8 pump, pipe, pumps & rig components. Too much list. Call for prices 361-375-3998 or 361-319-2999.

22W BE Combination Rotary, V60 Wisconsin Motor, 2x3 Mission Mud Pump, Hercules 6 Cyl. Deck Eng. Ready to Drill!.........$30,000 ........231-920-1973.

´76 Gardner Denver 2000 mounted on Carrier. ´91 Ford 9000 pipe truck, pipe bed, w/slide & dolly. 2,100' 3-1/2 IF bottle neck, 20' pipe w/slots. 4-6” collars 20' ´77 Int. 5000 water truck, 80 BB w/vac pump. Rouch 512 spinners, subs, tools. For Detailed Specs, Photos, and Prices, please call 307-620-9180 or 307-684-9180 or E-mail: [email protected].

2002 RD20 mounted on 4 axle Crane Carrier w/350 Cummins. 1250x350 air. Recent top overhaul & turbo. Range III, set up for large diameter drilling with 5-1/2” drill rod ..............$450,000. 208-772-4004

´82 DH1 Driltech, mtd. on 4 axle CC w/ 400 Cummins. 1050x350 Sullair compressor. 3408 Cat deck motor. 34´ of head travel, Stinger to run Range 3 casing. 13-3/8 & 10-3/4 Eckel power tongs, tractor w/drop deck trailer. 1,050´ of 4-1/2” x 25” drill pipe. 80´ of collars, 12” & 8” hammers, IR fast track 1070x350. $320,000........307-382-4216. 1983 Track Drill with 1,000´ New 4.5 x 20 reverse circulation drill rods. High torque. Heavy hoist ..................$395,000. Jay 406-261-6711 1972 Gardner Denver 1500WHP, 4 axle CCC w/400 Cummins (low hrs), 10” table, WEJ compressor w/cycle blower, caliper brake, (2) 5x6 mud pumps in series, new sandline drum, 5” Kelly, Working Daily. Various new parts. Price Reduced. Must Sell! Call Jim 217-932-3000 day/night. Schramm T64 HB - 6 rod carousel, rebuilt deck engine/compressor 450/250 air, new clutch, heat exchanger, mtd. on ´77 Ford 8000. Reduced $45,000 OBO. Also available, 320 ft. of drill stem, stablizers, subs, & bits......608-790-3745.

135 RIGS 2007 Atlas-Copco T4W 2006 Atlas-Copco T3W 1070/350, rod loader, spinner, mud pump. Price Reduced. 2005 Ingersoll-Rand T4W low hours, excellent condition 2006 Schramm T450WS low hours and many extras. 2002 Schramm 660 900/350 1998 Ingersoll-Rand T4W 900/350 Price Reduced. 1984 Ingersoll-Rand T4DH Price Reduced. 1993 Ingersoll-Rand T3W 900/350 1984 Driltech D40K complete rebuild 1999 lots of extra's. 2001 Driltech D25 1050/350 Excellent Condition. 2006 Driltech D25 1000/350, very low hours. 2006 ECM 590 YH70 Drifter Frac Unit on 1999 F550 with 6 ton hoist. Tony Fritz 570-470-6323 www.lodestarequipment.com ´86 Schramm T685DH Deep Hole 3,000 ft. Rig, 900-350 air, GMC 7500 crew truck, water & fuel tanks. ´97 Ford F900 pipe truck, 2006 Ingersoll Rand compressor 1170-350, doghouse w/tools, 1,860' drill pipe, bits, hammers, generator, hand tools, ´99 Freightliner winch truck. Can sell separately........918-698-7285.

2002 Taylor HRT 5000, 200,000 lb. DD, 67´, 5 axle carrier, C-15 540 HP Cat power, GD 18” table, 5” hex Kelly. Challenger 360-200, 200,000 lb. DD, 96’. 3 axle trailer mounted, enclosed Cat C-15 power, 96´ high, 18” H&T table, square Kelly and H&T swivel, 8´ sub structure. Challenger 320-150, 150,000 lb. DD, 200,000 floor, 79´, 3 axle trailer mounted, enclosed Detroit series 60 540 HP, Detroit power, H&T 18” table. Failing 2500, tandem axle, trailer mounted, 671 Detroit, Double Drum. Failing Jed A, trailer mounted, 2-471 Detroit’s, Gorman Rupp RC pump, 6” Kelly and swivel. Call 808-478-7112.

1972 BE 10R - Serial no. 33472. Mtd. on 1972 Ford L8000, 3208 Cat diesel, 5x6 GD mud pump, 50SDS LeROI air compressor, water injection, line oiler, 240' drill rod, 25' fluted Kelly, tag axle. New rod rack, new mud tub, less than 6,000 original hours on Rig! Ready to Drill. E-mail: [email protected] Call 517-857-2266 or 517-204-1635.

1996 Ford/IR DRILL RIG. 2006 1321 Weldco-Beales casing hammer. 2 Miller Bobcat 225 welders. 2 Pullmaster winches. Petrol drill pipe chain & tongs. Casing hammer rails, Mission 4x3 centrifugal pump. $219,000.00. See pics at: www.idahowelldrilling.com 208-286-7900

Midway HD 1500 - 60K#, 53 ft. mast, on Ford 8000. Needs work. Air clutches.....$23,000 ....772-468-3108.

SPIKE’S RIG SALES We Buy, Sell and Trade Rigs.

Call toll free 888-204-3907.

“Rotary Drilling Equipment Broker”

Ed Livingston Sales Co. LLC We understand your drilling problems and equipment needs! 2421 Rimrock Road • Billings, MT 59102

307-587-5192 • 406-656-6111 fax e-mail: [email protected] www.edlivingston.com Check web site for pictures and details.

ROTARY’s Portadrill RC, 522 Boart Longyear DB 430 Schramm: T-64’s, T64 retrofitted, TH-40, T64HB’s, T-66H, 450, 450-H, T-660, T-685HH, T-985H, T-300M, T-450WS (2) T-64 Schramm Pkg. Deals Davey M-8’s Diedrich D-120 Driltech: D-40-K, D-25-KW’s, D-25, T25K5W GEFCO: 30K, 300, 55-15K-HL Foremost: DR-12W, DR-24’s, DR-40, CT 150 Failing: Jet A RC, Holemaster, CF-15’s, 1250’s, 2000, F-10, 1500, 2500 Franks RC-102 Drillmax 180, 250 Drillmaster 400 GD 500, 1000, 2000, 1500 WHD, 14W, 17W-1, 1500W, 2500, 3000 Mayhew: 500, 1000, 2000 Reed SK-1 REICHdrill/Chicago Pneumatic: T-650 W11’s, T-625W, 625 W11, T-650W’s, T-600, T-650 WS, T-700 Magnum, CPT-672 HH RC angle pkg., T-690W, T-690W II, CP-RT 1800, RT-2500, CPT-650, CP-T-650 W Legend, CP-650 SS, CP-T-670, CP-T-7000 HH, 450 Crawler Portadrill TKS, 524 SpeedStar: SS-5, SS-10, SS-15, SS15K, SS-16 CCC, SS-22, SS-35, SS40, SS-70K CCC, SS-135, SS-700, SD-200, (2) SS-15 III, Mini Star, 30K Atlas Copco T-3W IR: T-4 HH’s, TH-60’s, T-64’s, RO-300, T-4 BH, DM45E-Tracks, TH-75W, TH-55, T-685 HH, T-3, T-3W’s, T-4’s, T-4W, T-4W LD, R-300, RD-20’s w/rod DSI Quikdrill SQD-275 Jaswell 1200 Canterra CT311 Midway 3500 CCC, 13-M, 13-W, 1500’s Sanderson Cyclone 200R 10R Cyclone 35R Combo Rig, 36R, 44R Shop built: 300´ & 400´ Drills, 2500 Wichtex: R-3 Cyclone Dyna YGL-100, Tracks BUCKET Parts inventory for CP, REICHdrill, IR, Schramm & Driltech MANY WATER TRUCK’s, BUGGIES, SERVICE, AND VAC TRUCKS MISC. Mud Systems Drill Steel & Tooling Schramm, IR Compressors Holte Casing Extractor, Hammer Viper Grouters Numerious Mud Pumps, Grouters, Mud Systems Drill Rod, Air Boosters, Compressors, Generators AUGER’s YGL-100, Tracks Core Drill Wireline Pkg. CT 150 Foremost CME: 45’s, 55’s, 75’s, 550, 850 Diedrich D-50, D-120 Mobile: B-40, B-53, B-57, B-61HD, B-59 1989 Canterra 150, CP-15 SIMCO: 2800 - Tk Mt., 4000 - Track Mt. Ardco C-1000, Williams PUMP HOIST’s Smeal 3T, 4T, 5T, 10T, 12T; Pulstar P7000, Semco 6000, G&R, Monitor CABLE TOOL’s 1W, 20-W, 22-W’s, 22W Series I, II, & III, 24-L’s, 28-L’s, 36-L’s, 60-L’s SpeedStar 71, 72, 55 Cyclone 36’s, 42-R Cardwell SA 200 Walker-Neer 32 Spudder Workover Rig’s

1980 CP RT-1800 - 800/300 Air—Pkg. w/pump & 1,200’ pipe. 72 CP T-650 Retro - 500/300 Sullair—Nice! 1980 EZ-Bore - 100/42 Bucket Rig. Failing CF-15 - 5x6 Pump—Dev. air—Bargain! Failing 1250 - 5x6 Pump—Dev. air diesel. 1973 Failing Jed-A-Reverse - 450/250 Air—18” Table—(2) 471—Trailer. GD-1500 - 7-1/2x8—Dev. air on 1998 Ford 7,000 mile. 1978 GD-2000 - 900/350 Air — 5-1/2x10 Pump — Hydro-brake — CCC w/600 hp Cummins — Sharp! GD-3000 - Complete package—Rebuilt and worked— ”New reduced price”. Ideco H-40-Completely refurbished & working rig to 10,000´. 2007 IR RD-20III - 4,700 Hrs.—w/pipe—Booster & aux air—Great Price. 1992 IR TH-60 - 5x8 Pump on deck—750/350 Air— 2000 IHC. 1978 Midway 1500 - 7-1/2x10 Pump—52´ Mast—KW mounted. 1982 Midway 15M - 5-1/2x8 — 750/150 Air — 48´ Mast — Autocar — Very Nice! 1978 Midway 25M - Total refurbished 2011—CCC mounted—Best on the market! National T-20 - Completely refurbished & working rig to 7,000´. 1973 Portadrill 10-TL - Tophead – 70K pullback— 500/250 Air. 1980 Portadrill RVT - 375/150 Air—600´ Pipe. 1977 Portadrill TKT Prospector - 7-1/2x10 Pump— 500/250 Air on (4) axle IHC—Complete Package. 1975 Robbins T-37 - Hi-torque—Mechanical Tophead— Carrier mtd. 1975 Schramm T-985 Retro–900/350 Sullair—Good Buy. 1985 SpeedStar 30K – CCC mounted – Extra Nice! 2006 SpeedStar50K - 1050/350 Air—3x4 Pump—Low Miles. 1982 SpeedStar 70K - 42/100 Mast—900/350 Air. 1992 SpeedStar SD-50 – 5x6 Pump—225/200 Air— Tophead—Top condition! 1972 SpeedStar SS-15THH - 500/250 Air—5x6-1/4 Pump—Tophead—460´ pipe. 1976 SpeedStar SS-16 w/SS-22 drawworks—Great Buy! 1981 SpeedStar SS-40SP - CCC mtd.—Hyramatic Brake—18” Table—Carrier ............................$295,000. 2002 Taylor HRT-5000 - 65/200,000 Mast – DD Drawworks—18” Table—5 Axle Carrier. Wilson 600 - 7-1/2x14—P/B—60 Series Detroit. Wilson Mogul 42 - 95/300 Mast—27-1/2” Table–Trailer.

2000 BK51-F4L912 - Deutz, 2,000 lb. and 5,000 lb. Pullmaster winch, direct drive cathead and 3LG pump, auto hammer, hydraulic cooler, front buggy winch, front auger and r/s rod racks, hyd. track adjusters, angle drill capable, water tank. Asking $78,000 OBO. Call for pics. 407-298-7777

1995 V-100 Versa-Drill (complete rebuild) ................................$130,000.00. 2000 V-100 Versa-Drill (complete motor and rig rebuild) ....................$140,000.00. 2006 V-1555 Versa-Drill.....$330,000.00. For additional information and pictures go to www.rdnpdrilling.com or call Norm Eger 219-956-3481.

2007 SIMCO 7000 on a Peterbilt tandem axle truck w/CAT engine. New 3x4 Centrifugal mud pump, 2 Winches, 10 Rod Carousel for 20’ drill rods (includes 200’ of drill rod). 1-855-222-8571

IF WE DON’T HAVE IT, WE CAN & WILL FIND IT FOR THE LOWEST PRICE AVAILABLE.

CP 650 - 1974 - 450 x 250 air. Many upgrades. Mtd. on ´74 Mack. 333 Cat on deck. Drill rods included....$38,500 OBO. 518-797-3786

MANY MORE RIGS AVAILABLE ASK FOR SPIKE

www.spikesrigs.com

e-mail us @ [email protected] or [email protected] or call 888-204-3907 or 814-676-1963 or 239-774-1939

Fax: 239-774-6666 or 814-676-0378

TH60 - 825/350 air, 3x4 centrifugal, mtd. on ´89 HME. Set up for casing hammer. ......$150,000. Casing hammer available. RO300 w/2-5 x 10 Gaso rebuild. All new valve & hydrostats mtd. on Paystar 5000 w/8V71.......$150,000 ........559-905-0289.

Crawler hard rock drill rig and tooling available for rent or purchase. Owner financing available. Call and make an offer! Rig is practically new at 160 hours. Call Dan at 443-375-6106 or e-mail at [email protected] .

Schramm Rig T985 - Mounted on Hendrickson Crane carrier. Major rebuild. $65,900. Must Sell! Call Jim 217-932-3000 day or night.

www.nationaldriller.com N AT I O N A L DRILLER October 2011 | 77

WANTED TO BUY FOR EXPORT

135 RIGS

INGERSOLL-RAND DRILL DM45E, DML, DMM2, DMM3, T3W, T4W, T5W, RD10, RD20

1997 DSM-Gardner Denver 1400 STS, air clutches, 8-1/2 retractable rotary, 10 speed, variable speed pulldown and holdback; welder on rig with plug in the side. Bean injection, Gardner Denver 5x6 mud pump, 256 LeROI compressor, 4 hyd. jacks, DSM swivel, 300 ft. of 2-7/8 drill pipe. Rig has factory made grouter. Mounted on 1997 Chevy 8200 tandem axle truck, 40,000 rears, 18 front. Rig has lots of options. Low Hours..$245,000 OBO. 918-647-8926 or 918-649-8160. J. Grantham Drilling - Oklahoma

DRILTECH DRILL D40K, D60K D90K SCHRAMM 685 PLEASE CONTACT US TEL 818-956-5231 FAX 818-956-5239

www.pacificcranes.com 2002 RD20 mounted on 4 axle CC w/350 Cummins. 1250/350 air. 5 hrs. on new 3412 Cat, Range 3, 1,800´ of drill pipe, 90´ of 6” collars, 20´ of 8” collars, 12 & 8” hammers, tractor trailer w/drop deck. IR fast track 1170/350. ...$700,000. 307-382-4216

2003 Foremost Dual Rotary DR 12/25P-40/12-900 03 Sterling, 900/350. $510,000.00 • 1996 Driltech, Model T25KW 97 Ford, 900/350, New Paint. $159,000.00 • 1996 GEFCO SD-30 300/200, 5x6. $68,000.00 • 1991 GEFCO 30K 91 Peterbilt, 900/350. $129,000.00 • 1990 GEFCO SD-200 500/200, 5x6. $125,000.00 • 1978 IR TH60 Reconditioned, 450/250, 3x4. $110,000.00 • 1970 Gardner-Denver 1000 98 Peterbilt, 5x6. $49,000.00 • 1963 1250 Failing 81 Ford F700 4x4, 5x6. $29,000.00

1979 SIMCO 5000 on Ford L9000 twin axle, 4x3 Mission pump, 15' rod box, 300 c.i.d. Ford gas deck engine, 3406 Cat diesel in Carrier, 240' 3" rods, mud pan. Excellent start-up rig package. $32,500.........910-270-2919

1986 REICHdrill 650 WS. New Atlas casing hammer w/lift system. $169,000 OBO. Drill rods, bits, and water truck available ................208-772-4004.

www.laibecorp.com or call Marcus Laibe

1992 Schramm T450M on Ford FT-900. 200x300 air. 471 Detroit deck motor. 3x4 mud pump. 6 rod Lazy Susan. $100,000 negotiable. Also, 1999 Int’l water truck $15,000. 1996 SIMCO 6000 pump hoist .......$15,000......................269-684-3549.

800-942-3388

1978 BE 10-R - 6/71 Detroit, 256-S2 LeROI. 3208 Turbo Cat mtd. on Hendrix crane carrier. No tools, no mud pump. Good Condition..........................$25,000. 928-925-0533. Central Arizona

2005 SIMCO 2800 on a 7300 IHC 4x4 truck. This rig handles 10’ drill rods, 2speed drillhead, 2x3 centrifugal mud pump, 2 winches, 185/150 air compressor, 500 gallon water tank, Includes SIMCO PDQ drill rod. 1-855-222-8571 78 |

2000 GEFCO 30K mounted on 378 Peterbilt, 3406E 8LL trans., 1050x350 Sullair, 5x6 Gardner Denver pump. $265,000. 970-779-8921 or eves 970-259-8559

1980 Midway 15M mounted on 1979 Autocar w/fresh overhaul, 900/125 Sullair, PTO driven, 3 drum drawworks, 8" retractable table, 4 x 3 cent. mud. NICE CLEAN RIG. $150,000.00 US. 806-778-4920

1975 Ingersol Rand TH60 - Mounted on Ford Truck. 256 LeROI Air Compressor. New Tires and New Valve Bank. Asking $60,000. 602-540-8893

For more information please visit our web site

2007 Versa-Drill V-2000 - 4,200 hours. 15K mainline, 4K auxiliary line, double catwalk, 3L6 Moyno, hyd. welder/gen. 20 gpm injection pump. Price Lowered! Now $525,000......888-372-4461.

1988 T4 IR Rig. 0 hrs. on rebuilt 900/350 comp. 2,200 hrs. Cummins KD16, complete with 1,000 ft. +/- of 4-1/2” & 4” IR drill rod. 5”, 6”, and 8” DHDS. Bits to 10-1/2”. Very good shape. Owner operated........$156,000....Call 800-253-1451.

Gardner Denver 1500 mounted on ´98 Ford L9T with Cat engine approx. 7K miles on truck. Includes 7.5 x 8 mud pump, 300 cubic foot air compressor, 7.5 retractable table, 3 leveling jacks, and 38-foot mast .............................$120,000. 601-597-6827 or 601-445-8930.

Portadrill 524/1-738 - 54’ derrick, switched to hydrostat controls, mtd. on 1994 International, (11) 4” 30’ drill collars, 2,000’ 2-7/8” high-drill drill pipe, 28’ flatbed pipe trailer, 28’ enclosed doghouse w/lights, generator, workbench, lockers, & shelving. $155,000. FZFXZH Gardner Denver mud pump 5-1/2” x 12” with twin Detroits mtd. on mud boat bottom . . . . . . . . . . $30,000. Call John at 217-240-0560.

N AT I O N A L DRILLER October 2011 www.nationaldriller.com

Versa-Drill V-100, 1998, 6x6 International 4800 Carrier, 500/200 compressor, oiler, carousel, 3x4 Pump. All rods and pan incl. Fast wells and geothermal. Works daily. $165,000. 910-270-2919

1990 Versa-Drill V-100, low hours. Mounted on 1987 Brigadier, low miles. 300/200 Air, 5x6 GD. Also, 4x3 Centrifugal Mud. Make offer. Call 1-204-482-7886 Mb, Canada. HTB builds new Kelly, top drive, air, & mud rigs. We sell & repair used rigs. Go to web site for pictures & listings. Rigs & components. HTBPORTABLEDRILLINGRIGS.COM Portadrill 10TKT mtd. on L800 Ford gas carrier, Detroit deck motor, 8-1/2" NEW retractable table, double drum drawworks, sandline, 5 x 4 cent. mud, 50' mast.....$40,000.00 US.....806-778-4920. 1973 GD 15W, 56' derrick, 350 Cummins, 9" Howard Turner table, 5x6 mud, WEJ air w/booster, 3" swivel, hold back for DTH.....................505-753-7590.

1978 DSI Quikdrill, Tophead Drive (Dual Motor), GD 5x6 Mud, Joy 250/125 Air, F7000 3208 Cat, Great Working Condition. $35,000. Call Ira 813-633-9566. Pics/Videos/Info at www.exumwater.com 2001 Driltech D25K - 3,700 hrs. 157K miles. 1000 CFM/350 PSI, great condition. Rubber 90% good. 420 ft. rod. All related tools included ...............$210,000. 800-422-7614 or 704-902-4210. Schramm T64HB - 8V71 Detroit on deck - Good. 750/150 LeROI comp. - Good. 2 motor tophead drive. 200 ft. 4-1/2” x 20 ft. rod. 5” hammer & 6” bit. Mtd. on 850 Ford V8 gas.$25,000 OBO..609-882-3107

1991 Failing F-6 - 4BT3-9-P Cummins dsl. 3 winches. 5,846 hrs. Like new. Mtd. on 1991 Int’l 4900 6x6. Fuller 6 spd trans. 17K miles. $55,000. 423-510-0110.

Gardner Denver 2000, 6 lines, 58' mast, 18" table, 1,200' drill pipe, 5-1/2x10 mud, mounted on ´77 Kenworth 4 axle carrier, currently drilling ..............$225,000 OBO. 806-681-7150

135 RIGS

SPIKE’S RIG SALES CALL TOLL FREE 888-204-3907

Additional Details/ Photos @ www.belcodrillingequipment.com

RIGS 2008 Cameron C-500 (NEW) $725K 1977 GD 2000, 5x10” mud $295K 1976 GD 2000, 7x10” mud $205K 1979 SpeedStar SS-15II. Tophead, Air/Mud...$77.5K Ideco H-35, DD, Trl. Mnt. 96x210’ New Pemco, Det.60. $375K GD 15W, 750x300 Screw air comp $105K 1987 REICHdrill C-700C, Air $150K 1990 Failing F10-WT, mud $125K 1980 Challenger 320, Trl. Mnt. High Sub, 17.5” Table, $450K Wilson Mogul 42, 96x250’ Detroit 60, $150K Horizontal Drill Rig, 150k Pullback, Cummins, Skid mnt. $125K

DUPLEX MUD PUMPS IDECO MM 300. 7 x 12”, Det. $45K IDECO D-50, 5 x 10” Bare Pump, $12.5K C-350 7-3/4 x 18”, no motor, $16K C-150 7-1/4 x 12”, Detroit. $25K GD 4-1/2 x 5” 3 cyc. Lister $12K

Also Available Winch Trucks, Haul Trucks, Water Trucks, Air Compressors, Boosters, Rotary Tables, Swivels, Blocks & Much More!

or CHECK OUT OUR WEB SITE: WWW.SPIKESRIGS.COM

Ph. 972-897-9607

E-MAIL US AT EITHER ADDRESS:

www.summitpowerandsupply.com

[email protected]

[email protected]

NEW ARRIVALS

RIGS

06 REICHDRILL T-650-W LEGEND 4 98 & 2000 IR T-4’s SCHRAMM T-66H - 3,000´ DRILL, RC CAPABLE 88 SCHRAMM T-660 - CSG. HAMMER DIEDRICH D-50 72 CP T-670 GD 1000 MAYHEW 1000 72 GUS PECH NEW STYLE 36-L OLD STYLE 36-L TK MTD. 22-W 1979 20-W SMEAL R-12 (2) SMEAL 10-T SPEEDSTAR WS-50 PUMP HOIST BAYLICK 25 TON SMEAL 5-T PULSTAR P-38000, 05 STERLING 07 SMEAL 5T 04 STERLING 2,100 GAL. WATER TK - CRANE JENSEN 3T, 94 FORD 03 STERLING WATER TRUCK

No one can beat our prices. No One!!

888-204-3907 ATTENTION! We have found the best way to market your drills. Call us if you want to sell fast! Most new drill listings only lasting two months or less. Looking for Late Model Rigs, have customers waiting. Extensive list of buyers, our business thrives on our many referrals from past satisfied buyers and sellers. Hassle-free, low cost to sellers passed on to buyers. 25 years of honest business practices makes us who we are.

1977 IR TH55 - 40 ft. mast with TH60 tophead. Casing driver, main line and sandline. LeROI 500@125 PSI air, 300 ft. drill rods. 1977 IH truck w/DT 466 motor. $24,000..........503-668-6913

1,000’ 2-3/8” x 20’ x 2-3/8” MH Reg., $10/FT. 680’ 2-7/8” x 20’ x 2-3/8” MH Jr FJ, $15/FT. 540’ 2-7/8” x 20’ x 2-7/8” IF, $15/ FT. 700’ 3-1/2” x 2-3/8” IF Flush, $15/ FT. 1,800’ 3-1/2” x 20’ x 3-1/2” IF, $15/ FT. 500’ 4-1/2” x 25’ x 3-1/2” Reg. CP, $15/ FT. 1,575’ IR T4W 4-1/2” x 25’x 3-1/2” API Reg. (9) 5-7/8” x 28’ x 4” FH, Drill Collars, $1,250 (8) 6” x 25’ x 4” FH Drill Collars, $1,250 Ea.

2001 Driltech T25K Drill Rig, 900x300 Sullair comp. Mtd. on 2002 Sterling 9513 truck, 27,297 mi. C/w drill pipe, hammers & bit. Very good cond. $199,900. 817-771-2166 www.milesequipment.com

138 SHOP BUILDINGS

WANTED - Approximately 1969 thru 1972 SpeedStar SS-210 Drill. Running Machine, Partial Machine, and / or Parts. 603-491-7777

REVERSE DRILL PIPE - 1,800' of 6-5/8" x 20' Hacker Pipe....$109,517. 530-674-5861

1978 36TH60, International Truck, Piston & Centrifugal Pumps, All New Tires; Tophead, Swivel and both pumps overhauled. Ready to Drill! ......989-539-3011.

Failing 1500, 5x6 mud pump, 43 ft. mast, 3rd winch. $20,000 985-502-8696 Jaswell 2400 - 1292 - 1150 - 671T & 1200. 900/350, 892T. 671T & 1200 900/350, 450 Cummins & 400 Cummins on Paystars.......................508-248-7063.

1977 TH-50 high torque tophead drive, large water course swivel, 225' of 4.5" drill pipe and accessories, mounted on Autocar with 230 Cummins. Current ND plates and DOT inspection........$75,000. [email protected] 701-238-5409 2005 SpeedStar 50K - mounted on 2005 Peterbilt 357 w/CAT C-15, 1050-350 air, 4x3 Mission centrifugal pump. ........................Call 307-680-9901.

SIMCO 5000 - shop built PTO driven, 3x2 Cent. 100/185 air, 8,000 lb. winch, grouter, 435´ 2-7/8” rod, mtd. on ´81 2575 Int’l, 300 Cummins. Good shape, great on fuel, low maintenance. Call 989-305-0463.

I BUY USED MUD ROTARY RIGS. Such as Mayhew, GD, SpeedStar, Failing, Badger. Also, mud pumps. 979-553-3714 Texas

1984 SpeedStar 30K...............$125,000. ´77 Int’l 5000 w/4,000 gal & water pump. Call Balow 928-899-1400 or 928-442-3240 Central AZ.

(3) Failing 1500’s, 27´ mast, 5x6 mud pumps. 727-571-1313 or 727-463-6091.

1982 SS40 SP Drilling Rig with pipe, pumps, collars, trucks, etc. For more information ...Call 307-751-0071.

´91 IR TH-55, rods, tools, 600/250, $110,000/OBO CALL KEN 989-295-7722.

2007 Atlas Copco T3-DH70, 1,500 Hrs. 2005 Atlas Copco T3W, 1070, $360,000 2003 IR T3-DH50, 5,500 Hrs., $335,000 1994 IR T3W, 825/350, 3x4, $170,000 1996 IR T4W, 900/350, $205,000 1981 IR T4LD, Range II, 70K, $155,000 1977 CP 7000, 825/300, $65,000 1981 Jaswell J1200, 900/350, $75,000 1995 Drillmaster 400, 300/200, 5x6, $85,000 1981 Failing CF15, 5-1/2”x8”, LeROI $75,000 Failing CF15, 2005 Kenworth T300, $80,000 Failing CF15,´86 Chevy, FM45 Pump, $35,000 Franks RC-102 Reverse Rig, Pipe, $125,000 GD 1000, ’86 Freightliner, 5x6, $75,000 Lanark 2500, Trailer, 7-1/2”x10”, 18” Table Mayhew 1000, 7-1/2” Retract, 5x6, $25,000 Midway 15M, 5-1/2x8, Air Clutches, $125,000 1975 Midway 1300, 5x6, LeROI, $55,000 1992 Mobile B-59, Ardco 4x4 Buggy 1997 Schramm T685, 74K Pullback, 1000/500 1980 Schramm T685, 40K ’93 Mack, $150,000 1978 Schramm T685, CCC, $95,000 1999 SpeedStar 30K, 1000/350, 3x4, $225,000 1988 SpeedStar 30K, 900/350, 3x4, $110,000 1978 SpeedStar SS15, CCC, 750/250, $65,000 1978 SpeedStar SS22, 8x4 CCC, $140,000

DRILL PIPE & COLLARS

Located in Moab, Utah Contact Todd Beeman 435-259-7281 [email protected] 1973 T4 - 250/600 air, Detroit on deck, 501 gas in truck. 500 ft. of rods and tools. Good condition .................$35,000. 803-932-0715

Liberty Hill, Texas

´78 IR 36TH60 on 5000 Paystar w/871 Detroit. 3x4 Sandmaster mud pump. 250x450 LeROI air .....................$48,000. 614-877-9407 - leave message.

Steel Buildings - Quonsets Arch Seconds - 25x40, 30x50, 40x60, 45x72 & 51x96. Roof & sides. Ltd supplies. Archway Steel Buildings 800-344-2724/Fax 412-771-4191

139 SLOTTING MACHINES

J&K Tool Company, Inc. - PVC Screen Slotting Machines - PVC Threading Machines - Perforating Machines Affordable, easy to operate automated machines with touch screen programming. Visit web site for more information.

Boart Longyear DB430 - 2008. Bought new in 2010. +/- 700 hrs. 500’ 3 -1/2” rods. ODEX system. 385,000.00$ 450-577-2990

Classified Advertising Deadline

JANUARY 2012 ISSUE December 1, 2011

www.jktool.com [email protected] tel 320-563-4967 fax 320-563-8051

152 TRANSPORTING

We Will Move It! Call For Best Rate!

800-292-7447

www.nationaldriller.com N AT I O N A L DRILLER October 2011 | 79

WANTED

WANTED

WANTED

WANTED

WANTED

WANTED

WANTED

WANTED

(800) 292-7447 (270) 325-3300

WANTED

WANTED

WANTED

SONIC

2003 VERSA-SONIC K50 on 2002 Int´l 4900 6x6. 51,321 miles, 6,616 hours on rebuilt 530/300 hp engine. Ext. tower w/22´ stroke, Jib boom, 20´ rod rack, break-out table w/rod spinners, 12K & 4K winches, Bean and Moyno pumps. Viking 200/150 compressor. Very good condition. Drilling every day. Price reduced to $310,000. Call Tim at 937-236-8805 x 273 or E-mail to: [email protected].

WANTED

WANTED

144 SONIC RIGS AND TOOLS

WANTED

Bucyrus Erie 60L or 24L in good shape with diesel power unit. Truck or trailer mounted. No dealers please. E-mail details, photos and location to [email protected].

WANTED: Ingersoll Rand air compressor airend cores or drill airend cores. Top Dollar Trade-In Value Offered. Call 800-633-5206 M-F 9 AM-5 PM EST.

176 WATER LEVEL MEASUREMENT Waterline Envirotech Ltd. has manufactured water level indicators for 30 years. We offer depths to 2,000 feet in various scales and a speedy repair service (most brands). Complete ready to use instruments start at $237. Tel/Fax 360-676-9635 E-mail: [email protected]

CLASSIFIED AD FORM Pre-Owned Sonic Drill Rigs w w w. s o n i c d r i l l s u p p ly. c o m 415-488-4621

2005 Sonic EHX Drill Rig Sonicor 50K Drill Head Mud Pump KT 3350 Mounted on Western Star truck. Please call Mike 424-242-1212 for details.

155 TRENCHERS Utility 475 John Deere set up for digging 12” ditch, angle blade and backhoe. $7,500.00 319-721-7902 DITCH WITCH 7610 - 80 HP GOOD CONDITION, 650 HRS. [email protected] 1-866-935-5426

160 TRUCKS 30-Freightliner Trucks 6x6, 60 Series Detroit, HT740, Allison Trans., Rockwell Axle, 68KGVW, 315/80 R22.5 Michelin, Low Miles SEMCO, Inc. PH#800-541-1562 Auger truck, 17 in. fiberglass body, gas powered. All units working. 40 ft. reach +/_ ......................................$3,850. Call 800-253-1451.

174 WANTED I WANT TO BUY PUMP HOISTS DRILL RIGS & RIG PARTS RENE HENDON 281-260-0880 80 |

NATIONAL DRILLER

PHONE

FA X

850-482-6310 800-874-4245

850-482-4864 800-845-7119

E-mail: [email protected]

P. O. BOX 6167 MARIANNA, FL 32447

CLASSIFIED ADVERTISING RATES

[email protected]

Web site: w w w. n a t i o n a l d r i l l e r. c o m

Deadline for classified ads is the 1st of the preceding Line Ads: month, unless the 1st falls during a weekend then the dead(per 2-1/4”column-approx. 36 letters & spaces per line): line is the Friday prior to the 1st. All classified ads must be prepaid. Rates are based on U.S. dollars and payment must 1x: 10.25 per line 41.00 min. be made in U.S. dollars or a $10 processing fee will be 3x: 10.00 per line 40.00 min. 6x: 9.75 per line 39.00 min. applied. Commission rates do not apply to classified ads. We 12x: 9.50 per line 38.00 min. are not responsible for errors in ads that are called in or (Four line minimum charge.) handwritten. We are not responsible for errors beyond the first insertion. If there is an error in your ad, you must call Display Classified Ads: (per column inch – min. depth 2 column inches): us as soon as possible.

Web Site Classified Advertising: For only 50% of the price of your printed classified ad, your ad can appear on the National Driller Web Site.

1x: 68 per inch 6x: 64 per inch

3x: 65 per inch 12x: 58 per inch

Blind Ads: $15 Late Charges: $20

Classification you would like your ad to ____ 1 month _____ 3 months ____ 6 months appear under: ___________________ Frequency of ad: _____12 months _____Til Further Notice ____Run my ad on the web site for __________ months. Use Additional Sheet If Necessary (Please Type or Print) _____________ _____________

_____________ _____________

_____________ _____________

_____________ _____________

_____________ _____________

_____________ _____________

_____________ _____________

_____________ _____________

_____________ _____________

_____________ _____________

_____________ _____________

_____________ _____________

DATE_________ COMPANY _____________________________________________________________ CONTACT PERSON ___________________________________________ ADDRESS ________________________CITY _______________________ STATE _____ ZIP ___________ PHONE (_____) _____________ FAX (_____) _____________E-MAIL _______________________________________ HAVE YOU ADVERTISED WITH US BEFORE? ________ ACCOUNT NO. _______________________ SIGNATURE REQUIRED: _______________________________________________ METHOD OF PAYMENT: _____CHECK CREDIT CARD INFO: ___ M/C

___ VISA

_____MONEY ORDER

___

AM EXP

MAKE CHECKS PAYABLE TO: NATIONAL DRILLER

*3 DIGIT SECURITY CODE (on back of card) ___________

CREDIT CARD NO.: ___________________________________________EXP______________ NAME AS IT APPEARS ON CREDIT CARD: (PLEASE PRINT) __________________________________________________

N AT I O N A L DRILLER October 2011 www.nationaldriller.com

2011

177 WATER TANKS

1995 Ford 9000, built in 2001, with 2,600 gallon flat tank, 225 gallon auxiliary fuel. Locking rears, Cat 375 HP. 48,000 GVW, 1/4 plate construction . . . . . . . . . .$14,500. 937-355-3825 Manufacturing quality custom built epoxy coated Flattanks - any gallon or tank length sizes with or without material handling IMT cranes. Custom build your next water tank or pipe truck with us, engineered for convenience and durability.

PRODUCTS

INFLATABLE 1990 GMC flatbed water truck, 24' bed. $19,000.00 Call Steve 775-530-5954. In stock a 2,100 gallon water tank, 20' 6"-246" tank length, 21" tank height, (2)-119 gallon fuel tanks w/20 gpm fuel transfer pump with 50' fuel reel, passenger side torch box w/50' torch reel, 19" fold down step w/15 ton pintol air & wiring to rear, 18" elevated crane mount, 3 tie down winches w/straps, full length tie down rail w/channel stakes, mid deck stake pockets. Call for Price!!!

185 WELL REHAB

WELL PACKERS

F700 platform - 20 ft., Cummins diesel. Excellent shape. $3,800 Call 800-253-1451.

Check out our new web site for more information.

´95 Ford L8000 Rig Tender®, 127,555 mi., Cummins dsl.10 speed trans. 2,000 gallon water tank. $22,900 817-771-2166 www.milesequipment.com

Call us for our used truck new tank inventory list.

Steve 406-466-2146 Cell 406-544-5914 Choteau, MT E-mail: [email protected] Web: www.northwestflattanks.com

CUSTOM BUILT PACKERS FOR ANY APPLICATION

184 WELL PACKERS 180 WATER TRUCKS

PACKERS THAT LAST

D L SO

F9000 - Cummins diesel, 24 ft. flatbed, hood needs work, truck is solid, 1,000 gal. water tank . . . . . . . . . . . . . . . . . .$3,450. Call 800-253-1451.

GMC Service Truck, welder, 250 gal. fuel tank, 1,000 gal. water tank, 24 ft. steel flat bed, Jake brake, 4 axles. All equipment strong and in great shape. 40K mi. on Detroit engine ..........$17,500. Call 800-253-1451.

COMPETITIVE PRICES

for all applications

• Standard and Custom • •

inflatable packers 100 to 10,000 psi 1-1/2 to 40 inch holes

Baski Inc. www.baski.com

Fax: 303 789-0900 [email protected]

Ph. 303 789-1200 or 800 552-2754 1586 South Robb Way Denver, CO 80232 USA

1-800-452-4902 Manufactured by Vanderlans & Sons 1320 S. Sacramento Street Lodi, California 95240 209-334-4115 Fax 209-339-8260 www.lansas.com

ROSE-WALL MFG. INC. 5827 W. U.S. 40, Greenfield, IN 46140

Rose-Wall Mfg. has been manufacturing custom well drilling equipment for over 25 years with over a thousand satisfied customers. Specializing in water tanks and grouting systems. We build, sandblast, and paint our equipment in

www.nationaldriller.com our shop with our employees. Our focus is on detail, pride, and workmanship, so let us build your next custom water tank or grouting system that will stand the test of time.

rose-wall.com

800-321-1541

Your classified ad can appear on the National Driller web site for only 50% of the price of your printed classified ad.

For more info call 800-874-4245 or 850-482-6310.

[email protected] www.nationaldriller.com N AT I O N A L DRILLER October 2011 | 81

192 WINCHES

186 WELL SCREENS

IN STOCK NOW 1,000 - 25,000 lb. Winches RECOVERY WINCHES Equal Speed Free Spool

HOIST WINCHES Equal Speed Rapid Reverse

187 WELL PLUGS

(800) Mr Winch (800) 679-4624

TORQUER

™

www.ryanhyd.com

Professional Locking Well Plugs 200 TOO LATE TO CLASSIFY

Sched.40/80 1/2”, 3/4” 1”, 1-1/4” 1-1/2”, 2” 2-1/2”, 3”, 4”, 5”

Driller to operate SD200 top drive drilling, mud & air in Ohio. Call Chuck 740-387-9355.

6”, 8” Bright Safety Orange Domed top No metal parts Nylon construction Dual tethering device Dual one piece gasket Distribution worldwide Vapor Extraction

• • • • • • • •

U.S. Patent

Coming soon:

www.torquerplugs.com

195 WIRE ROPE BUCKEYE DRILL COMPANY BETHLEHEM WIRE ROPE FOR ALL YOUR DRILLING NEEDS MADE IN THE U.S.A.

PH. 800-767-3745 www.buckeyedrill.com

GeoLoop Grouter 50-500, 4 cyl. Cummins, 20K lb. Trailer, 3K lb. sand hopper, 80 gal. mixer, 500 gal. water tank, 600 ft. loop spinner. Three to choose from........Starting at $33,400. 410-789-5020 Looking for a full-time environmental/ geotechnical driller with 3+ years of experience with hollow stem auger drilling and monitoring well installation. CDL required. Able to lift up to 80 lbs. Competitive salary based on experience/ qualifications. Paid time off/holidays. Health insurance. Relocation assistance. Contact or send resumé to [email protected].

WIRE ROPE! Made In U.S.A.

Drill Line Sandline Non-Rotating Hoist Line

800-523-5760 540-635-7753 FAX 540-635-6352

TRIDENT TOOL INC. www.tridenttool.com Classified Advertising Deadline

DECEMBER 2011 ISSUE November 1, 2011 82 |

1996 CME 550X ATV Auger Rig, 18,000 lbs., length 21’, width 8’, height 7’, main hoist 7,000 lbs, auxiliary hoist 3,200, 1,300 hours approx., Cummins 300 hp..................................$100,000. 931-762-7548 x13 or 931-242-2010 1991 IHC 4600 4x4, Frac unit, 10,000 lb. National Crane, 30,000 lb. winch, Perkins diesel on deck, 12 ft. road plow, Ready to work ............................$55,000. Ditch Witch 5110 trencher/hoe, 2,200 hrs. Nice shape ..........................$15,000. DSI 10 bag grouter, hyd. driven ..$6,000. 1991 IHC 4600 4x4, DT466, Allison auto., van body, 600 ft. pump test reel, 15 bag DSI grouter, stainless tanks, 10,000 watt hyd. generator/welder, 16,000 lb. winch..$50,000 .410-409-1754.

N AT I O N A L DRILLER October 2011 www.nationaldriller.com

Need Texas Licensed Drillers & Pump Installer. Top pay depending on experience. Call 936-825-4508. 1995 Schramm T450W - Totally Rebuilt & Retro Fitted Front to Back in Winter of 2007. Mounted on Ford LTS 8000, GHH 825/350 PSI Compressor, rebuilt March 2011. Series 60 Detroit Diesel with ADM Electronic Module. Atlas R2000 Casing Hammer. Too Many Details to List, Working Daily. Well Maintained - Kept in Heated Shop. Call for details 519-763-8239 or E-mail: [email protected]

5 Ton SMEAL on a 1996 GMC Topkick TC6H042, 5 ton hoist Model 5T SMEAL, Caterpillar diesel 3116, 155,833 miles ........................$18,500. 931-762-7548 x13 or 931-242-2010 DRILLERS/HELPERS WANTED: Established Tennessee based company seeking experienced Drillers and Drill Helpers. Successful candidates should have experience with auger, rock coring mud rotary, and air rotary drilling. Environmental drilling experience a plus. Valid Class B CDL and clean driving record required. Excellent pay & benefit package. FAX RESUME TO: 423-510-0237 E-MAIL RESUME TO: [email protected]

Portadrill RVT R-6 - Completely rebuilt, 471 Detroit, air controls, 49´ derrick, trl. mtd. Excellent. $120K. 800-692-0222

www.nationaldriller.com

Your classified ad can appear on the NATIONAL DRILLER web site for only 50% of the price of your printed classified ad.

For more info call 800-874-4245 or 850-482-6310.

RU ZZZGULOOPD[ULJVFRP

The DRILLMAX 2400 is shown with 1170 / 350 air compressor, piston mud pump, 4 cylinder Bean pump, 28 feet tophead stroke, 50,000 LBS pullback, 24” retractable table, 15,000 LB main winch line with hydraulic jib, 6,000 LB sandline winch with hydraulic jib. Geotechnical options include in-hole hammer, hydraulic hammer, auger rack, and interchangeable auger connection sub which can be switched to air drilling within 5 minutes.

DRILLMAX 2400

Call about the previously owned drilling equipment offered by Mid America Drilling Equipment, Inc.

RU

2004 DMAC 250

1981 SS22M

1999 DM 300

EQUIPPED WITH MUD AND AIR, JOHN DEERE DIESEL DECK ENGINE, PIPE RACK AND SINGLE ROD LOADER, RETRACTABLE, RUNS 20FT DRILL PIPE

7 1/2 X 10 GARDNER DENVER MUD PUMP, 50 FT MAST, 15” ROTARY TABLE, 4 PART LINES, 3RD LINE SAND REEL PRICED TO SELL!

MOUNTED ON IHC 4X4 EQUIPPED WITH 5X6 MUD, 2 X 3 DESANDER PUMP, PIPE RACK, SINGLE ROD LOADER, 4 LEVELING JACKS, RETRACTABLE TABLE



Card No. 48

www.NationalDriller.com | 83

-RLQXVRQ)DFHERRN

)ROORZXVRQ7ZLWWHU ®

Mobile Drill Intl