5 Steps to a 5 AP Chemistry

5 STEPS TO A AP Chemistry 5 Other books in McGraw-Hill’s 5 STEPS TO A 5 series include: AP Biology AP Calculus AB/B...

Author: Langley R.H. | Moore J.

1599 downloads 3581 Views 2MB Size Report

This content was uploaded by our users and we assume good faith they have the permission to share this book. If you own the copyright to this book and it is wrongfully on our website, we offer a simple DMCA procedure to remove your content from our site. Start by pressing the button below!
Report copyright / DMCA form

DOWNLOAD PDF

5 STEPS TO A

AP Chemistry

5

Other books in McGraw-Hill’s 5 STEPS TO A 5 series include: AP Biology AP Calculus AB/BC AP Computer Science AP English Language AP English Literature AP Environmental Science AP European History AP Physics B and C AP Psychology AP Spanish Language AP Statistics AP U.S. Government and Politics AP U.S. History AP World History 11 Practice Tests for the AP Exams Writing the AP English Essay

5 STEPS TO A

5

AP Chemistry 2010–2011

John T. Moore Richard H. Langley

New York Chicago San Francisco Lisbon London Madrid Mexico City Milan New Delhi San Juan Seoul Singapore Sydney Toronto

Copyright © 2010, 2008, 2004 by The McGraw-Hill Companies, Inc. All rights reserved. Except as permitted under the United States Copyright Act of 1976, no part of this publication may be reproduced or distributed in any form or by any means, or stored in a database or retrieval system, without the prior written permission of the publisher. ISBN: 978-0-07-162476-3 MHID: 0-07-162476-7 The material in this eBook also appears in the print version of this title: ISBN: 978-0-07-162477-0, MHID: 0-07-162477-5. All trademarks are trademarks of their respective owners. Rather than put a trademark symbol after every occurrence of a trademarked name, we use names in an editorial fashion only, and to the benefit of the trademark owner, with no intention of infringement of the trademark. Where such designations appear in this book, they have been printed with initial caps. McGraw-Hill eBooks are available at special quantity discounts to use as premiums and sales promotions, or for use in corporate training programs. To contact a representative please e-mail us at [email protected]. TERMS OF USE This is a copyrighted work and The McGraw-Hill Companies, Inc. (“McGraw-Hill”) and its licensors reserve all rights in and to the work. Use of this work is subject to these terms. Except as permitted under the Copyright Act of 1976 and the right to store and retrieve one copy of the work, you may not decompile, disassemble, reverse engineer, reproduce, modify, create derivative works based upon, transmit, distribute, disseminate, sell, publish or sublicense the work or any part of it without McGraw-Hill’s prior consent. You may use the work for your own noncommercial and personal use; any other use of the work is strictly prohibited. Your right to use the work may be terminated if you fail to comply with these terms. THE WORK IS PROVIDED “AS IS.” McGRAW-HILL AND ITS LICENSORS MAKE NO GUARANTEES OR WARRANTIES AS TO THE ACCURACY, ADEQUACY OR COMPLETENESS OF OR RESULTS TO BE OBTAINED FROM USING THE WORK, INCLUDING ANY INFORMATION THAT CAN BE ACCESSED THROUGH THE WORK VIA HYPERLINK OR OTHERWISE, AND EXPRESSLY DISCLAIM ANY WARRANTY, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. McGraw-Hill and its licensors do not warrant or guarantee that the functions contained in the work will meet your requirements or that its operation will be uninterrupted or error free. Neither McGraw-Hill nor its licensors shall be liable to you or anyone else for any inaccuracy, error or omission, regardless of cause, in the work or for any damages resulting therefrom. McGraw-Hill has no responsibility for the content of any information accessed through the work. Under no circumstances shall McGraw-Hill and/or its licensors be liable for any indirect, incidental, special, punitive, consequential or similar damages that result from the use of or inability to use the work, even if any of them has been advised of the possibility of such damages. This limitation of liability shall apply to any claim or cause whatsoever whether such claim or cause arises in contract, tort or otherwise.

ABOUT THE AUTHORS JOHN MOORE grew up in the foothills of western North Carolina. He attended the University of North Carolina–Asheville, where he received his bachelor’s degree in chemistry. He earned his master’s degree in chemistry from Furman University in Greenville, South Carolina. After a stint in the United States Army he decided to try his hand at teaching. In 1971 he joined the faculty of Stephen F. Austin State University in Nacogdoches, Texas, where he still teaches chemistry. In 1985 he started back to school part-time, and in 1991 received his doctorate in education from Texas A&M University. For the last eight years he has been co-editor, along with one of his former students, of the Chemistry for Kids feature of The Journal of Chemical Education. In 2003 his first book, Chemistry for Dummies, was published. For the past several years, he has been a grader for the free-response portion of the AP Chemistry exam. RICHARD LANGLEY grew up in southwestern Ohio. He attended Miami University in Oxford, Ohio, where he earned bachelor’s degrees in chemistry and mineralogy and a master’s degree in chemistry. He next went to the University of Nebraska in Lincoln, where he received his doctorate in chemistry. He took a postdoctoral position at Arizona State University in Tempe, Arizona, then became a visiting assistant professor at the University of Wisconsin–River Falls. He has taught at Stephen F. Austin State University in Nacogdoches, Texas, since 1982. For the past several years, he also has been a grader for the free-response portion of the AP Chemistry exam. The authors are also coauthors of Chemistry for the Utterly Confused and Biochemistry for Dummies.

Í v

This page intentionally left blank

CONTENTS Preface, xiii Acknowledgments, xv Introduction: The Five-Step Program, xvii

STEP 1 Set Up Your Study Program, 1 1 What You Need to Know About the AP Chemistry Exam, 3 Background of the Advanced Placement Program, 3 Who Writes the AP Chemistry Exam?, 4 The AP Grades and Who Receives Them, 4 Reasons for Taking the AP Chemistry Exam, 4 Questions Frequently Asked About the AP Chemistry Exam, 5 2 How to Plan Your Time, 9 Three Approaches to Preparing for the AP Chemistry Exam, 9 Calendar for Each Plan, 11

STEP 2 Determine Your Test Readiness, 15 3 Take a Diagnostic Exam, 17 Getting Started: The Diagnostic Exam, 18 Answers and Explanations, 27 Scoring and Interpretation, 30

STEP 3 Develop Strategies for Success, 31 4 How to Approach Each Question Type, 33 Multiple-Choice Questions, 33 Free-Response Questions, 36

STEP 4 Review the Knowledge You Need to Score High, 41 5 Basics, 43 Units and Measurements, 44 Dimensional Analysis—The Factor Label Method, 45 The States of Matter, 46 The Structure of the Atom, 46 Periodic Table, 50 Oxidation Numbers, 53 Nomenclature Overview, 53 Experimental, 59 Common Mistakes to Avoid, 59 Review Questions, 60 Answers and Explanations, 63 Free-response Questions, 64 Answers and Explanations, 64 Rapid Review, 65 Í vii

viii U Contents 6 Reactions and Periodicity, 67 AP Exam Format, 67 General Aspects of Chemical Reactions and Equations, 68 General Properties of Aqueous Solutions, 69 Precipitation Reactions, 70 Oxidation–Reduction Reactions, 71 Coordination Compounds, 75 Acid–Base Reactions, 76 Experimental, 80 Common Mistakes to Avoid, 80 Review Questions, 81 Answers and Explanations, 83 Free-response Questions, 84 Answers and Explanations, 85 Rapid Review, 86 7 Stoichiometry, 88 Moles and Molar Mass, 89 Percent Composition and Empirical Formulas, 89 Reaction Stoichiometry, 91 Limiting Reactants, 92 Percent Yield, 93 Molarity and Solution Calculations, 94 Experimental, 95 Common Mistakes to Avoid, 95 Review Questions, 95 Answers and Explanations, 98 Free-Response Questions, 99 Answers and Explanations, 100 Rapid Review, 101 8 Gases, 102 Kinetic Molecular Theory, 103 Gas Law Relationships, 104 Experimental, 112 Common Mistakes to Avoid, 113 Review Questions, 114 Answers and Explanations, 117 Free-Response Questions, 119 Answers and Explanations, 119 Rapid Review, 121 9 Thermodynamics, 123 Calorimetry, 124 Laws of Thermodynamics, 126 Products Minus Reactants, 126 Thermodynamics and Equilibrium, 130 Experimental, 131 Common Mistakes to Avoid, 131 Review Questions, 132 Answers and Explanations, 134

Contents Í ix

Free-Response Questions, 134 Answers and Explanations, 135 Rapid Review, 135

10 Spectroscopy, Light, and Electrons, 137 The Nature of Light, 137 Wave Properties of Matter, 139 Atomic Spectra, 139 Atomic Orbitals, 140 Experimental, 141 Common Mistakes to Avoid, 141 Review Questions, 142 Answers and Explanations, 143 Free-Response Questions, 144 Answers and Explanations, 144 Rapid Review, 145 11 Bonding, 147 Lewis Electron-Dot Structures, 148 Ionic and Covalent Bonding, 148 Molecular Geometry—VSEPR, 152 Valence Bond Theory, 154 Molecular Orbital Theory, 155 Resonance, 156 Bond Length, Strength, and Magnetic Properties, 158 Experimental, 158 Common Mistakes to Avoid, 158 Review Questions, 159 Answers and Explanations, 161 Free-Response Questions, 162 Answers and Explanations, 162 Rapid Review, 164 12 Solids, Liquids, and Intermolecular Forces, 166 Structures and Intermolecular Forces, 167 The Liquid State, 168 The Solid State, 169 Phase Diagrams, 170 Relationship of Intermolecular Forces to Phase Changes, 171 Experimental, 173 Common Mistakes to Avoid, 173 Review Questions, 173 Answers and Explanations, 176 Free-Response Questions, 176 Answers and Explanations, 177 Rapid Review, 177 13 Solutions and Colligative Properties, 179 Concentration Units, 180 Electrolytes and Nonelectrolytes, 183 Colligative Properties, 183

x U Contents Colloids, 187 Experimental, 187 Common Mistakes to Avoid, 188 Review Questions, 189 Answers and Explanations, 191 Free-Response Questions, 194 Answers and Explanations, 194 Rapid Review, 195

14 Kinetics, 197 Rates of Reaction, 198 Integrated Rate Laws, 201 Activation Energy, 202 Reaction Mechanisms, 203 Catalysts, 204 Experimental, 204 Common Mistakes to Avoid, 205 Review Questions, 205 Answers and Explanations, 207 Free-Response Questions, 208 Answers and Explanations, 209 Rapid Review, 210 15 Equilibrium, 211 Equilibrium Expressions, 213 ^telier’s Principle, 214 Le Cha Acid–Base Equilibrium, 215 Buffers, 223 Titration Equilibria, 224 Solubility Equilibria, 228 Other Equilibria, 230 Experimental, 230 Common Mistakes to Avoid, 231 Review Questions, 231 Answers and Explanations, 235 Free-Response Questions, 237 Answers and Explanations, 237 Rapid Review, 238 16 Electrochemistry, 241 Redox Reactions, 242 Electrochemical Cells, 242 Quantitative Aspects of Electrochemistry, 247 Nernst Equation, 249 Experimental, 250 Common Mistakes to Avoid, 250 Review Questions, 251 Answers and Explanations, 253 Free-Response Questions, 255 Answers And Explanations, 256 Rapid Review, 258

Contents Í xi

17 Nuclear Chemistry, 260 Nuclear Reactions, 260 Nuclear Stability, 262 Nuclear Decay Calculations, 263 Mass–Energy Relationships, 264 Common Mistakes to Avoid, 265 Review Questions, 265 Answers and Explanations, 266 Rapid Review, 267 18 Organic Chemistry, 268 Alkanes, 268 Structural Isomerism, 270 Common Functional Groups, 272 Macromolecules, 272 Experimental, 274 Common Mistakes to Avoid, 274 Review Questions, 275 Answers and Explanations, 275 Free-Response Questions, 276 Answers and Explanations, 276 Rapid Review, 277 19 Experimental, 278 Experiment 1: Finding the Formula of a Compound, 279 Experiment 2: The Percentage of Water in a Hydrate, 282 Experiment 3: Molar Mass by Vapor Density, 283 Experiment 4: Molar Mass by Freezing-Point Depression, 283 Experiment 5: Molar Volume of a Gas, 285 Experiment 6: Standardization of a Solution, 286 Experiment 7: Acid–Base Titration, 286 Experiment 8: Oxidation–Reduction Titration, 287 Experiment 9: Mass/Mole Relationships in a Chemical Reaction, 288 Experiment 10: Finding the Equilibrium Constant, 289 Experiment 11: pH Measurements and Indicators for Acid–Base Titrations, 290 Experiment 12: The Rate and Order of a Reaction, 290 Experiment 13: Enthalpy Changes, 291 Experiment 14: Qualitative Analysis of Cations and Anions, 292 Experiment 15: Synthesis and Analysis of a Coordination Compound, 292 Experiment 16: Gravimetric Analysis, 293 Experiment 17: Colorimetric Analysis, 294 Experiment 18: Chromatographic Separation, 294 Experiment 19: Properties of Buffer Solutions, 295 Experiment 20: An Electrochemical Series, 296 Experiment 21: Electrochemical Cells and Electroplating, 296 Experiment 22: Synthesis and Properties of an Organic Compound, 297 Common Mistakes to Avoid, 297 Review Questions, 297 Answers and Explanations, 297 Free-Response Questions, 297 Answers and Explanations, 298 Rapid Review, 300

xii U Contents

STEP 5 Build Your Test-Taking Confidence, 301 AP Chemistry Practice Exam 1, 303 AP Chemistry Practice Exam 2, 325 Appendixes, 345 SI Units, 347 Balancing Redox Equations Using the Ion-Electron Method, 349 Common Ions, 353 Bibliography, 356 Web sites, 357 Glossary, 358 Exam Resources, 367 Notes, 372

PREFACE Welcome to the AP Chemistry Five-Step Program. The fact that you are reading this preface suggests that you will be taking the AP exam in chemistry. The AP Chemistry exam is constantly evolving and so this guide has evolved. In this edition, we have updated the book to match the new AP Chemistry exam, especially the changes in the free-response section. In the new exam, questions about laboratory experiments will be treated differently than in previous years. We have revised our presentation to reflect this change. We have also significantly revised the reaction chapter to mirror the extensive changes made in the reaction question on the AP exam. The AP Chemistry exam certainly isn’t easy, but the rewards are worth it—college credit and the satisfaction of a job well done. You will have to work and study hard to do well, but we will, through this book, help you to master the material and get ready for the exam. Both of us have many years of experience in teaching introductory general chemistry at the university level. John Moore is the author of Chemistry for Dummies and he and Richard “Doc” Langley have also written Chemistry for the Utterly Confused, a guide for college/high school students. Each of us has certain skills and experiences that will be of special help in presenting the material in this book. Richard has also taught high school science and John has years of experience teaching chemistry to both public school teachers and students. Both of us have been graders for the AP Exam chemistry free-response questions for years and have first-hand knowledge of how the exam is graded and scored. We have tried not only to make the material understandable, but also to present the problems in the format of the AP Chemistry exam. By faithfully working the problems you will increase your familiarity with the exam format, so that when the time comes to take the exam there will be no surprises. Use this book in addition to your regular chemistry text. We have outlined three different study programs to prepare you for the exam. If you choose the year-long program, use it as you are taking your AP Chemistry course. It will provide additional problems in the AP format. If you choose one of the other two programs, use it with your chemistry textbook also; but you may need to lean a little more on this review book. Either way, if you put in the time and effort, you will do well. Now it’s time to start. Read the Introduction: The Five-Step Program; Chapter 1, What You Need to Know About the AP Chemistry Exam; and Chapter 2, How to Plan Your Time. Then, take the Diagnostic Exam in Chapter 3. Your score will show how well you understand the material right now and point out weak areas that may need a little extra attention. Use the review exams at the end of the chapters to check your comprehension. Also pay attention to the free-response questions. That is where you can really shine, and they are worth almost as much as the multiple-choice part. Use the Rapid Reviews to brush up on the important points in the chapters. Keep this book handy—it is going to be your friend for the next few weeks or months. Good luck: but remember that luck favors the prepared mind.

Í xiii


ACKNOWLEDGMENTS The authors would like to thank Grace Freedson, who believed in our abilities and gave us this project. Many thanks also to Del Franz, whose editing polished up the manuscript and helped its readability. Special thanks to Heather Hattori and her high school chemistry classes for their many useful suggestions and corrections.

Í xv


INTRODUCTION: THE FIVE-STEP PROGRAM The Basics Not too long ago, you enrolled in AP Chemistry. A curiosity about chemistry, encouragement from a respected teacher, or the simple fact that it was a requirement may have been your motivation. No matter what the reason, you find yourself flipping through a book, which promises to help you culminate this experience with the highest of honors, a 5 in AP Chemistry. Yes, it is possible to achieve this honor without this book. There are many excellent teachers of AP Chemistry out there who teach, coax, and otherwise prepare their students into a 5 every year. However, for the majority of students preparing for the exam, the benefits of buying this book far outweigh its cost. The key to doing well on the Advanced Placement (AP) Chemistry Exam is to outline a method of attack and not to deviate from this method. We will work with you to make sure you take the best path towards the test. You will need to focus on each step, and this book will serve as a tool to guide your steps. But do not forget—no tool is useful if you do not use it.

Organization of the Book This book conducts you through the five steps necessary to prepare yourself for success on the exam. These steps will provide you with the skills and strategies vital to the exam, and the practice that will lead you to towards the perfect 5. First, we start by introducing the basic five-step plan used in this book. Then in Chapter 1, we will give you some background information about the AP Chemistry exam. Next, in Chapter 2, we present three different approaches to preparing for the exam. In Chapter 3, we give you an opportunity to evaluate your knowledge with a Diagnostic Exam. The results of this exam will allow you to customize your study. In Chapter 4, we offer you a multitude of tips and suggestions about the different types of question on the AP Chemistry exam. Many times good test-taking practices can help raise your score. Since the volume of the material to be mastered can be intimidating, Chapters 5 to 19 present a comprehensive review of the material that you will cover in an AP Chemistry course. This is review material, but since not all of this material appears in every AP Chemistry class, it will also help to fill in the gaps in your chemistry knowledge. You can use it in conjunction with your textbook if you are currently taking AP Chemistry, or you can use it as a review of the concepts you covered. At the end of each chapter, you will find both a multiplechoice and free-response exam for you to test yourself. The answers and explanations are included. This will also help you identify any topics that might require additional study. After these content chapters, there are two complete chemistry practice exams, including multiple-choice and free-response questions. The answers and explanations are included. These exams will allow you to test your skills. The multiple-choice questions will provide you with practice on questions similar to those asked on past AP exams. These are not the exact questions, but ones that will focus you on the key AP Chemistry topics. There are also Í xvii

xviii U Introduction examples of free-response questions; there are fewer of these, since they take much longer to answer. After you take an exam, you should review each question. Ask yourself, why was this question present? Why do I need to know this? Make sure you check your answers against the explanations. If necessary, use the index to locate a particular topic and reread the review material. We suggest that you take the first exam, identify those areas that need additional study, and review the appropriate material. Then take the second exam and use the results to guide your additional study. Finally, in the appendixes you will find additional resources to aid your preparation. These include: • • • • • • • • •

Common conversions. How to balance Redox equations. A list of common ions. A bibliography. A number of useful Web sites. A glossary of terms related to AP Chemistry. A table of half-reactions for use while answering free-response questions. A table of equations and abbreviations for use while answering free-response questions. A periodic table for use when answering any exam questions.

The Five-Step Program Step 1: Set Up Your Study Program In Step 1, you will read a brief overview of the AP Chemistry exams, including an outline of the topics. You will also follow a process to help determine which of the following preparation programs is right for you: • Full school year: September through May. • One semester: January through May. • Six weeks: Basic training for the exam.

Step 2: Determine Your Test Readiness Step 2 provides you with a diagnostic exam to access your current level of understanding. This exam will let you know about your current level of preparedness, and on which areas you should focus your study. • Take the diagnostic exam slowly and analyze each question. Do not worry about how many questions you get right. Hopefully this exam will boost your confidence. • Review the answers and explanations following the exam, so that you see what you do and do not yet fully understand.

Step 3: Develop Strategies for Success Step 3 provides strategies that will help you do your best on the exam. These strategies cover both the multiple-choice and free-response sections of the exam. Some of these tips are based upon experience in writing questions, and others have been gleaned from our years of experience reading (grading) the AP Chemistry exams. • Learn how to read and analyze multiple-choice questions. • Learn how to answer multiple-choice questions, including whether or not to guess. • Learn how to plan and write answers to the free-response questions.

Introduction Í xix

Step 4: Review the Knowledge You Need to Score High Step 4 encompasses the majority of this book. In this step, you will learn or review the material you need to know for the test. Your results on the diagnostic exam will let you know on which material you should concentrate your study. Concentrating on some material does not mean you can ignore the other material. You should review all the material, even what you already know. There is a lot of material here, enough to summarize a year long experience in AP Chemistry and highlight the, well, highlights. Some AP courses will have covered more material than yours, some will have covered less; but the bottom line is that if you thoroughly review this material, you will have studied all that is on the exam, and you will have significantly increased your chances of scoring well. This edition gives new emphasis to some areas of chemistry to bring your review more in line with the revised AP Chemistry exam format. For example, there is more discussion of reactions and the laboratory experience. Each topic contains one or more short exams to monitor your understanding of the current chapter.

Step 5: Build Your Test-taking Confidence In Step 5, you will complete your preparation by testing yourself on practice exams. This section contains two complete chemistry exams, solutions, and sometimes more importantly, advice on how to avoid the common mistakes. In this edition, the free-response exams have been updated to more accurately reflect the content tested on the AP exams. Be aware that these practice exams are not reproduced questions from actual AP Chemistry exams, but they mirror both the material tested by AP and the way in which it is tested.

The Graphics Used in this Book To emphasize particular skills and strategies, we use several icons throughout this book. An icon in the margin will alert you to pay particular attention to the accompanying text. We use these three icons:

KEY IDEA

STRATEGY

TIP

This icon highlights a very important concept or fact that you should not pass over.

This icon calls your attention to a strategy that you may want to try.

This icon indicates a tip that you might find useful.

Boldfaced words indicate terms that are included in the glossary at the end of this book.


5 STEPS TO A

AP Chemistry

5


STEP

1

Set Up Your Study Program CHAPTER CHAPTER

1 2

What You Need to Know About the AP Chemistry Exam How to Plan Your Time


CHAPTER

1

What You Need to Know About the AP Chemistry Exam IN THIS CHAPTER Summary: Learn what topics are on the test, how the ETS scores the test, and basic test-taking information. Key Ideas KEY IDEA

% Most colleges will award credit for a score of 4 or 5. % Multiple-choice questions account for half of your final score. % There is one-quarter of a point deducted for each wrong answer on multiple-choice questions. % Free-response questions account for half of your final score. % There is a conversion of your composite score on the two test sections to a score on the 1-to-5 scale.

Background of the Advanced Placement Program The College Board began the Advanced Placement program in 1955 to construct standard achievement exams that would allow highly motivated high school students the opportunity to receive advanced placement as first-year students in colleges and universities in the United States. Today, there are 37 courses and exams with more than a million students from every state in the nation and from foreign countries taking the annual exams in May. The AP programs are for high school students who wish to take college-level courses. In our case, the AP Chemistry course and exam involve high school students in college-level Chemistry studies. Í 3

4 U STEP 1. Set Up Your Study Program

Who Writes the AP Chemistry Exam? A group of college and high school Chemistry instructors known as the AP Development Committee creates the AP Chemistry exam. The committee’s job is to ensure that the annual AP Chemistry exam reflects what is taught in college-level Chemistry classes at high schools. This committee writes a large number of multiple-choice questions, which are pre-tested and evaluated for clarity, appropriateness, and range of possible answers. The free-response essay questions that make up Section II go through a similar process of creation, modification, pre-testing, and final refinement, so that the questions cover the necessary areas of material and are at an appropriate level of difficulty and clarity. The committee also makes a great effort to construct a free-response exam that will allow for clear and equitable grading by the AP readers. It is important to remember that the AP Chemistry exam undergoes a thorough evaluation after the yearly administration of the exam. This way, the College Board can use the results to make course suggestions and to plan future tests.

The AP Grades and Who Receives Them Once you have taken the exam and it has been scored, your test will be graded with one of five numbers by the College Board: G G G G G

A 5 indicates that you are extremely well-qualified. A 4 indicates that you are well-qualified. A 3 indicates that you are adequately qualified. A 2 indicates that you are possibly qualified. A 1 indicates that you are not qualified to receive college credit.

A grade report, consisting of a grade of 1 to 5, will be sent to you in July. You will also indicate the college to which you want your AP score sent at the time of the exam. The report that the college receives contains your score for every AP exam you took that year and the grades you received in prior years, except for any that you request withheld. In addition, your scores will be sent to your high school.

Reasons for Taking the AP Chemistry Exam Why put yourself through a year of intensive study, pressure, stress, and preparation? Only you can answer that question. Following are some of the reasons that students have indicated to us for taking the AP exam: G

G G G G G

Because colleges look favorably on the applications of students who elect to enroll in AP courses. To receive college credit or advanced standing at their colleges or universities. To compare themselves with other students across the nation. For personal satisfaction. Because they love the subject. So that their families will be proud of them.

There are other reasons, but no matter what they are, the primary reason for your enrolling in the AP Chemistry course and taking the exam in May is to feel good about yourself and the challenges that you have met.

What You Need to Know About the AP Chemistry Exam Í 5

While there may be some altruistic motivators, let’s face it: most students take the exam because they are seeking college credit. This means you are closer to graduation before you even start attending classes. Even if you do not score high enough to earn college credit, the fact that you elected to enroll in AP courses tells admission committees that you are a high achiever and serious about your education.

Questions Frequently Asked About the AP Chemistry Exam What Is Going to Appear on the Exam? This is an excellent question. The College Board, having consulted with those who teach chemistry, develops a curriculum that covers material that college professors expect to cover in their first-year classes. Based upon this outline of topics, the multiple-choice exams are written such that those topics are covered in proportion to their importance to the expected chemistry understanding of the student. Confused? Suppose that faculty consultants agree that environmental issues are important to the chemistry curriculum, maybe to the tune of 10 percent. If 10 percent of the curriculum in an AP Chemistry course is devoted to environmental issues, you can expect roughly 10 percent of the multiple-choice exam to address environmental issues. Remember this is just a guide and each year the exam differs slightly in the percentages.

How is the Advanced Placement Chemistry Exam Organized? Table 1.1 summarizes the format of the AP Chemistry Exam.

Table 1.1 SECTION

NUMBER OF QUESTIONS

TIME LIMIT

I. Multiple-Choice Questions

75

90 minutes

Part A

3

55 Minutes

Part B

3

40 Minutes

II. Free-Response Questions

The exam is a two-part exam designed to take about three hours. The first section has 75 multiple-choice questions. You will have 90 minutes to complete this section. The second part of the exam is the free-response section. You will begin this section after you have completed and turned in your multiple-choice scan sheet. There will be a break before you begin the second section. The length of this break will vary from school to school. You will not be able to go back to the multiple-choice questions later. You will receive a test booklet for the free-response section of the test. You will have 95 minutes to answer six questions. These questions may cover any of the material in the AP Chemistry course. Section II consists of two parts. In the first part, you may use a calculator. You will have 55 minutes to answer three questions, the first of which will deal with equilibrium. In the second part, you may not use a calculator. You will have 40 minutes to answer three questions, the first of which will be a reaction question. One of the freeresponse questions will address laboratory work. The first part will account for 60% of your

6 U STEP 1. Set Up Your Study Program grade on the free-response portion (20% for each question). The second part will account for the remaining 40% of your free-response grade, with 10% being for the reactions questions and 15% each for the remaining questions. Each of the Chapters in Part III, after Chapter 5, covers one of these topics. There will be a question concerning reactions. There will be a question concerning an experiment.

Who Grades My AP Chemistry Exam? Every June a group of chemistry teachers gathers for a week to assign grades to your hard work. Each of these “Faculty Consultants” spends a day or so in training on a question. Each reader becomes an expert on that question, and because each exam book is anonymous, this process provides a very consistent and unbiased scoring of that question. During a typical day of grading, there is a selection of a random sample of each reader’s scores for crosschecking by other experienced “Table Leaders” to insure that the graders maintain a level of consistency throughout the day and the week. Statistical analysis of each reader’s scores on a given question assure that they are not giving scores that are significantly higher or lower than the mean scores given by other readers of that question. All these measures assure consistency and fairness for your benefit.

Will My Exam Remain Anonymous? Absolutely. Even if your high school teacher happens to read your booklet, there is virtually no way he or she will know it is you. To the reader, each student is a number and to the computer, each student is a bar code.

What About That Permission Box on the Back? The College Board uses some exams to help train high school teachers so that they can help the next generation of chemistry students to avoid common mistakes. If you check this box, you simply give permission to use your exam in this way. Even if you give permission, no one will ever know it is your exam.

How Is My Multiple-Choice Exam Scored? You will place your answers to the multiple-choice questions on a scan sheet. The scan sheet is computer graded. The computer counts the number of correct responses and subtracts one-fourth of the wrong answers. A blank response is neither right nor wrong. If N is the number of answers, the formula is: Nright − (Nwrong × 0.25) = raw score rounded up or down to nearest whole number

How Is My Free-Response Exam Scored? You are required to answer six free-response questions. The point totals will vary, but there is an adjustment of the points to match the assigned weighting of the question. For example, question #1 may be on a scale of 10 points, while question #2 may be on a scale of 7 points, and question #3 on a scale of 5 points. Since these questions are to count equally, a multiplier will be used to adjust the points to the same overall value.

So How Is My Final Grade Determined and What Does It Mean? This is where fuzzy math comes into play. The composite score for the AP Chemistry exam is 150. The free-response section represents 50% of this score, which equals 75 points. The multiple-choice section makes up 50% of the composite score, which equals 75 points.

What You Need to Know About the AP Chemistry Exam Í 7

Take your multiple-choice results and plug them into the following formula (this formula varies from year to year): (Ncorrect − 1/4 Nincorrect) × 0.7563 = your score for the multiple-choice section Take your essay results and plug them into this formula: (Points earned for question 1)(1.50) = score for question 1 (Points earned for question 2)(1.50) = score for question 2 (Points earned for question 3)(1.50) = score for question 3 (Points earned for question 4)(1.00) = score for question 4 (Points earned for question 5)(1.25) = score for question 5 (Points earned for question 6)(1.25) = score for question 6 Total weighted score for the essay section = sum of scores for all the questions. Your total composite score for the exam is found by adding the value from the multiplechoice section to the score from the essay section and rounding that sum to the nearest whole number. Keep in mind that the total composite scores needed to earn a 5, 4, 3, 2, or 1 change each year. A committee of AP, College Board, and Educational Testing Service (ETS) directors, experts, and statisticians determines these cutoffs. The same exam that is given to the AP Chemistry high school students is given to college students. The various college professors report how the college students fared on the exam. This provides information for the chief faculty consultant on where to draw the lines for a 5, 4, 3, 2, or 1 score. A score of 5 on this AP exam is set to represent the average score received by the college students who scored an A on the exam. A score of 3 or 4 is the equivalent of a college grade B, and so on. Over the years there has been an observable trend indicating the number of points required to achieve a specific grade. Data released from a particular AP Chemistry exam shows that the approximate range for the five different scores (this changes from year to year—just use this as an approximate guideline) is as follows: Table 1.2 CHEMISTRY Composite Score Range

AP Grade

Interpretation

Mid 80s–150

5

Extremely well-qualified for college credit

Mid 60s–mid 80s

4

Well-qualified

High 40s–mid 60s

3

Qualified

High 20s/low 30s–high 40s

2

Possibly qualified

0–high 20s

1

Not qualified

How Do I Register and How Much Does It Cost? If you are enrolled in AP Chemistry in your high school, your teacher is going to provide all of these details. You do not have to enroll in the AP course to register for and complete the AP exam. When in doubt, the best source of information is the College Board’s web site: www.collegeboard.com Students who demonstrate financial need may receive a refund to help offset the cost of testing. There are also several optional fees that are necessary if you want your scores rushed to you, or if you wish, to receive multiple grade reports.


What Should I Do the Night Before the Exam? TIP

TIP

Last-minute cramming of massive amounts of material will not help you. It takes time for your brain to organize material. There is some value to a last-minute review of material. This may involve looking over the Rapid Review portions of a few (not all) chapters, or looking through the Glossary. The night before the test should include a light review, and various relaxing activities. A full night’s sleep is one of the best preparations for the test.

What Should I Bring to the Exam? Here are some suggestions: G G G

G

G G G G

Several pencils and an eraser that does not leave smudges. Black or blue colored pens for use on the free-response section. A watch so that you can monitor your time. You never know if the exam room will, or will not, have a clock on the wall. Make sure you turn off the beep that goes off on the hour. A calculator that you have used during your preparation for the exam. Do not bring a new or unfamilar calculator. Your school code. Your photo identification and social security number. Tissues. Your quiet confidence that you are prepared and ready to rock and roll.

What Should I NOT Bring to the Exam? TIP

It’s probably a good idea to leave the following items at home: G G

G G G

A cell phone, beeper, PDA, or walkie-talkie. Books, a dictionary, study notes, flash cards, highlighting pens, correction fluid, a ruler, or any other office supplies. Portable music of any kind. Clothing with any chemistry on it. Panic or fear. It’s natural to be nervous, but you can comfort yourself that you have used this book and that there is no room for fear on your exam.

You should: G G G G

G

Allow plenty of time to get to the test site. Wear comfortable clothing. Eat a light breakfast and/or lunch. Remind yourself that you are well prepared and that the test is an enjoyable challenge and a chance to share your knowledge. Be proud of yourself!

Once test day comes, there is nothing further you can do. Do not worry about what you could have done differently. It is out of your hands, and your only job is to answer as many questions correctly as you possibly can. The calmer you are—the better your chances of doing well.

CHAPTER

2

How to Plan Your Time IN THIS CHAPTER: Summary: The right preparation plan for you depends on your study habits and the amount of time you have before the test. Key Idea KEY IDEA

% Choose the study plan that’s right for you.

Three Approaches to Preparing for the AP Chemistry Exam You are the best judge of your study habits. You should make a realistic decision about what will work best for you. Good intentions and wishes will not prepare you for the exam. Decide what works best for you. Do not feel that you must follow one of these schedules exactly; you can fine-tune any one of them to your own needs. Do not make the mistake of forcing yourself to follow someone else’s method. Look at the following descriptions, and see which best describes you. This will help you pick a prep mode. You’re a full-year prep student if: 1. You are the kind of person who likes to plan for everything very far in advance. 2. You arrive very early for appointments. 3. You like detailed planning and everything in its place. 4. You feel that you must be thoroughly prepared. 5. You hate surprises. If you fit this profile, consider Plan A.

Í 9

10 U STEP 1. Set Up Your Study Program You’re a one-semester prep student if: 1. You are always on time for appointments. 2. You are willing to plan ahead to feel comfortable in stressful situations, but are OK with skipping some details. 3. You feel more comfortable when you know what to expect, but a surprise or two is good. If you fit this profile, consider Plan B. You’re a six-week prep student if: 1. You get to appointments at the last second. 2. You work best under pressure and tight deadlines. 3. You feel very confident with the skills and background you learned in your AP Chemistry class. 4. You decided late in the year to take the exam. 5. You like surprises. If you fit this profile, consider Plan C. Look now at the following calendars for plans A, B, and C. Choose the plan that will best suit your particular learning style and timeline. For best results, choose a plan and stick wish it.

Table 2.1 STRATEGY

General Outline of Three Different Study Plans

Month

PLAN A (Full School Year)

PLAN B (1 semester)

PLAN C (6 weeks)

September– October

Introduction to material and Chapter 5

Introduction to material

Introduction to material and chapters 1-4

November

Chapters 6–7

December

Chapters 8–9

January

Chapters 10–11

Chapters 5–7

February

Chapters 12–13

Chapters 8–0

March

Chapters 14–16

Chapters 11–14

April

Chapters 17–19; Practice Exam 1

Chapters 15–19; Practice Exam 1

Skim Chapters 5–14; all Rapid Reviews; Practice Exam 1

May

Review everything; Practice Exam 2

Review everything; Practice Exam 2

Skim Chapters 15–19; Practice Exam 2

How to Plan Your Time Í 11

Calendar for Each Plan Plan A: You Have a Full School Year to Prepare The main reason for you to use this book is as a preparation for the AP Chemistry exam. However, this book is capable of filling other roles. It can broaden your study of Chemistry, help your analytical skills, and aid you scientific writing abilities. These will aid you in a college course in Chemistry. Use this plan to organize your study during the coming school year. SEPTEMBER–OCTOBER (Check off the activities as you complete them.) — Determine the student mode (A, B, or C) that applies to you. — Carefully read Chapters 1–4 of this book. You should highlight material that applies specifically to you. — Take the Diagnostic Exam. — Pay close attention to your walk-through of the Diagnostic Exam. — Look at the AP and other web sites. — Skim the review chapters in Step 4 of this book. (Reviewing the topics covered in this section will be part of your year-long preparation.) — Buy a few color highlighters. — Look through the entire book. You need to get some idea of the layout, and break it in. Highlight important points. — You need to have a clear picture of your school’s AP Chemistry curriculum. — Use this book as a supplement to your classroom experience. NOVEMBER (The first 10 weeks have elapsed.) — Read and study Chapter 5, Basics. — Read and study Chapter 6, Reactions and Periodicity. — Read and study Chapter 7, Stoichiometry. DECEMBER

— Read and study Chapter 8, Gases. — Read and study Chapter 9, Thermodynamics. — Review Chapters 5–7. JANUARY (20 weeks have elapsed.)

— Read and study Chapter 10, Spectroscopy and Electrons. — Read and study Chapter 11, Bonding. — Review Chapters 5–10.

FEBRUARY

— Read and study Chapter 12, Solids, Liquids, and Intermolecular Forces. — Read and study Chapter 13, Solutions and Colligative Properties. — Review Chapters 5–11. — Evaluate your weaknesses and refer to the appropriate chapters. You may wish to retake part of the Diagnostic Exam. MARCH (30 weeks have now elapsed.)

— — — —

Read and study Chapter 14, Kinetics. Read and study Chapter 15, Equilibrium. Read and study Chapter 16, Electrochemistry. Review Chapters 5–13.

APRIL

— Take Practice Exam 1 in the first week of April. — Evaluate your strengths and weaknesses. Review the appropriate chapters to correct any weaknesses. — Read and study Chapter 17, Nuclear Chemistry. — Read and study Chapter 18, Organic Chemistry. — Read and study Chapter 19, Experimental. — Review Chapters 5–16. MAY (first 2 weeks) (THIS IS IT!)

— — — —

Review Chapters 5–19—all the material! Take Practice Exam 2. Score your exam. Get a good night’s sleep before the exam. Fall asleep knowing you are well prepared.

GOOD LUCK ON THE TEST!


Plan B: You Have One Semester to Prepare This approach uses the assumption that you have completed at least one semester of Chemistry. This calendar begins in mid-year, and prepares you for the mid-May exam. JANUARY–FEBRUARY

APRIL

— Read Chapters 1–4 in this book. — Pay careful attention to the Diagnostic Exam. — Pay close attention to your walk-through of the Diagnostic Exam. — Read and study Chapter 5, Basics. — Read and study Chapter 6, Reactions and Periodicity. — Read and study Chapter 7, Stoichiometry. — Read and study Chapter 8, Gases. — Read and study Chapter 9, Thermodynamics. — Evaluate your strengths and weaknesses. — Re-study appropriate chapters to correct your weaknesses.

— Take Practice Exam 1 in the first week of April. — Evaluate your strengths and weaknesses. — Study appropriate chapters to correct your weaknesses. — Read and study Chapter 15, Equilibrium. — Review Chapters 5–10. — Read and study Chapter 16, Electrochemistry. — Read and study Chapter 17, Nuclear Chemistry. — Review Chapters 11–14. — Read and study Chapter 18, Organic Chemistry. — Read and study Chapter 19, Experimental.

MARCH (10 weeks to go.)

— Read and study Chapter 10, Spectroscopy and Electrons. — Review Chapters 5–7. — Read and study Chapter 11, Bonding. — Read and study Chapter 12, Solids, Liquids, and Intermolecular Forces. — Review Chapters 8–10. — Read and study Chapter 13, Solutions and Colligative Properties. — Read and study Chapter 14, Kinetics.

MAY (first 2 weeks) (THIS IS IT!)

— — — —

Review Chapters 5–19—all the material! Take Practice Exam 2. Score your exam. Get a good night’s sleep before the exam. Fall asleep knowing you are well prepared.


How to Plan Your Time Í 13

Plan C: You Have Six Weeks to Prepare This approach is for students who have already studied most of the material that may be on the exam. The best use of this book for you is as a specific guide towards the AP Chemistry exam. There are time constraints to this approach, as the exam is only a short time away. This is not the best time to try to learn new material. APRIL 1–15

MAY (first 2 weeks) (THIS IS IT!)

— — — —

— Skim Chapters 15–19. — Carefully go over the Rapid Reviews for Chapters 15–19. — Complete Practice Exam 2. — Score the exam and analyze your mistakes. — Get a good night’s sleep before the exam. Fall asleep knowing that you are well prepared.

Skim Chapters 1–4. Go over Chapter 5. Skim Chapters 6–9. Carefully go over the Rapid Review sections of Chapters 5–9. — Complete Practice Exam 1. — Score the exam and analyze your mistakes. — Skim and highlight the Glossary. APRIL 15–MAY 1

— Skim Chapters 10–14. — Carefully go over the Rapid Review sections of Chapters 10–14. — Carefully go over the Rapid Review sections of Chapters 5–9. — Continue to skim and highlight the Glossary.



2

STEP

Determine Your Test Readiness CHAPTER

3

Take a Diagnostic Exam


CHAPTER

3

Take a Diagnostic Exam IN THIS CHAPTER Summary: The diagnostic exam is for your benefit. It will let you know where you need to spend the majority of your study time. Do not make the mistake of studying only those parts you missed; you should always review all topics. It may be to your advantage to take the diagnostic exam again just before you begin your final review for the exam. This exam has only multiple-choice questions. It will give you an idea of where you stand with your chemistry preparation. The questions have been written to approximate the coverage of material that you will see on the AP exams and are similar to the review questions that you will see at the end of each chapter. Once you are done with the exam, check your work against the given answers, which also indicate where you can find the corresponding material in the book. We also provide you with a way to convert your score to a rough AP score. Key Ideas KEY IDEA

% Practice the kind of multiple-choice questions you will be asked on the real exam. % Answer questions that approximate the coverage of topics on the real exam. % Check your work against the given answers. % Determine your areas of strength and weakness. % Earmark the pages that you must give special attention.

Í 17

18 U STEP 2. Determine Your Test Readiness

Getting Started: The Diagnostic Exam The following problems refer to different chapters in the book. It is not important whether you get the correct answers. If you have a problem with one or more questions from a chapter, review the chapter. You may use a calculator and the periodic table. For each question, circle the letter of your choice.

Chapter 5 1. In most of its compounds, this element exists as a monatomic cation. (A) (B) (C) (D) (E)

F S N Ca Cl

2. Which of the following groups has the species correctly listed in order of decreasing radius? (A) (B) (C) (D) (E)

2+ + Cu , Cu , Cu 2+ 3+ V, V , V − − − F , Br , I B, Be, Li + + + Li , K , Cs

3. Which of the following elements has the lowest electronegativity? (A) (B) (C) (D) (E)

F I Ba Al C

4. Which of the following represents the correct formula for hexaamminecobalt (III) nitrate? (A) (B) (C) (D) (E)

[Co3(NH3)6](NO3)3 [Co(NH3)6](NO2)3 Am6Co(NO3)3 (NH3)6Co3(NO3) [Co(NH3)6](NO3)3

5. The discovery that atoms have small, dense nuclei is credited to which of the following? (A) (B) (C) (D) (E)

Einstein Dalton Bohr Rutherford Becquerel

Chapter 6 6. Choose the strongest Lewis acid from the following. (A) (B) (C) (D) (E)

BF3 F− OH− CH4 S2−

7. _____M n ( O H ) 2 ( s ) + ____H 3 A s O 4 ( aq ) → _____ Mn3(AsO4)2(s) +_____ H2O(1) After the above chemical equation is balanced, the lowest whole-number coefficient for water is: (A) (B) (C) (D) (E)

6 2 12 3 9

Choose one of the following for questions 8–10. (A) (B) (C) (D) (E)

2+

Cu 2− CO3 Fe3+ Al3+ Pb2+

8. This ion will form a precipitate when added to a sodium sulfate solution. 9. This ion gives a deep blue color when excess aqueous ammonia is added to a solution containing it. 10. Aqueous solutions of this ion give a reddish precipitate when excess hydroxide ion is added. 11. Which of the following best represents the net ionic equation for the reaction of calcium hydroxide with an aqueous sodium carbonate solution? (A) (B) (C) (D) (E)

2+

+

Ca + Na2CO3 → CaCO3 + 2 Na 2 Ca(OH) + Na2CO3 → Ca2CO3 + 2 NaOH 2− − Ca(OH)2 + CO3 → CaCO3 + 2 OH 2+ 2− Ca + CO3 → CaCO3 Ca(OH)2 + Na2CO3 → CaCO3 + 2 NaOH

Take a Diagnostic Exam Í 19

12. A student mixes 50.0 mL of 0.10 M Fe(NO3)2 solution with 50.0 mL of 0.10 M KOH. A green precipitate forms, and the concentration of the hydroxide ion becomes very small. Which of the following correctly places the concentrations of the remaining ions in order of decreasing concentration? (A) (B) (C) (D) (E)

2+

−

+

[Fe ] > [NO3 ] > [K ] − 2+ + [Fe ] > [K ] > lNO3 ] − + 2+ [NO3 ] > [K ] > [Fe ] − + 2+ [K ] > [Fe ] > [NO3 ] − 2+ + [NO3 ] > [Fe ] > [K ]

16. Ba + 2 H2O → Ba(OH)2 + H2 Barium reacts with water according to the above reaction. What volume of hydrogen gas, at standard temperature and pressure, is produced from 0.400 mol of barium? (A) (B) (C) (D) (E)

8.96 L 5.60 L 4.48 L 3.36 L 2.24 L

Chapter 8 Chapter 7 13. 14 H+ + 6 Fe2+ + Cr2O7 → 2 Cr3+ + 6 Fe3+ + 7 H 2O 2−

The above reaction is used in the titration of an iron solution. What is the concentration of the iron solution if it takes 45.20 mL of 0.1000 M 2− Cr2O7 solution to titrate 75.00 mL of an acidified iron solution? (A) (B) (C) (D) (E)

0.1000 M 0.4520 M 0.3616 M 0.7232 M 0.1808 M

14. Manganese, Mn, forms a number of oxides. A particular oxide is 49.5% mass Mn. What is the simplest formula for this oxide? (A) (B) (C) (D) (E)

MnO Mn2O3 Mn3O4 MnO2 Mn2O7

15. 2 KMnO4 + 5 H2C2O4 + 3 H2SO4 → K2SO4 + 2 MnSO4 + 10 CO2 + 8 H2O How many moles of MnSO4 are produced when 2.0 mol of KMnO4, 2.5 mol of H2C2O4, and 3.0 mol of H2SO4 are mixed? (A) (B) (C) (D) (E)

1.0 mol 3.5 mol 2.0 mol 2.5 mol 3.0 mol

17. A sample of chlorine gas is placed in a container at constant pressure. The sample is heated until the absolute temperature is doubled. This will also double which of the following? (A) (B) (C) (D) (E)

potential energy moles density number of molecules volume

18. A balloon contains 2.0 g of hydrogen gas. A second balloon contains 4.0 g of helium gas. Both balloons are at the same temperature and pressure. Pick the false statement from the following list. (A) The number of hydrogen molecules is the same as the number of helium atoms in each balloon. (B) The density of the helium in its balloon is greater than the density of the hydrogen in its balloon. (C) The volume of each balloon is the same. (D) The average speed of the molecules/atoms in each balloon is the same. (E) The average kinetic energy of the molecules/ atoms in each balloon is the same.

20 U STEP 2. Determine Your Test Readiness 19. The volume and pressure of a real gas are not the same as those calculated from the ideal gas equation, because the ideal gas equation does NOT take into account: (A) the attraction between the molecules and the speed at which the molecules are moving (B) the volume of the molecules and the mass of the molecules (C) the attraction between the molecules and the mass of the molecules (D) the volume of the molecules and variations in the absolute temperature (E) the volume of the molecules and the attraction between the molecules 20. Aluminum metal reacts with HCl to produce aluminum chloride and hydrogen gas. What volume of hydrogen gas, at STP, is produced when 13.5 g of aluminum is mixed with an excess of HCl? (A) (B) (C) (D) (E)

22.4 L 33.6 L 11.2 L 16.8 L 7.47 L

21. A sample containing the gases carbon dioxide, carbon monoxide, and water vapor was analyzed and found to contain 4.5 mol of carbon dioxide, 4.0 mol of carbon monoxide, and 1.5 mol of water vapor. The mixture had a total pressure of 1.2 atm. What was the partial pressure of the carbon monoxide? (A) (B) (C) (D) (E)

0.48 atm 0.18 atm 5.4 atm 0.54 atm 0.98 atm

22. An ideal gas sample weighing 0.548 g at 100°C and 0.993 atm has a volume of 0.237 L. Determine the molar mass of the gas. (A) (B) (C) (D) (E)

71.3 g/mol 143 g/mol 19.1 g/mol 0.0140 g/mol 35.7 g/mol

23. If a sample of He effuses at a rate of 30 mol per hour at 45°C, which of the gases below will effuse at approximately one-half the rate under the same conditions? (A) (B) (C) (D) (E)

CH4 O3 N2 H2 CO

Chapter 9 Choose from the following types of energy for questions 24–27. (A) (B) (C) (D) (E)

free energy lattice energy kinetic energy activation energy ionization energy

24. The energy required to produce a gaseous cation from a gaseous atom in the ground state 25. The average ____________ is the same for any ideal gas at a given temperature. 26. The maximum energy available for useful work from a spontaneous reaction 27. The energy required to completely separate the ions from a solid is 28. Oxidation of ClF by F2 yields ClF3, an important fluorinating agent formerly used to produce the uranium compounds in nuclear fuels: ClF(g) + F2(g) → ClF3(l). Use the following thermochemical equations to calculate ΔH °rxn for the production of ClF3: 1. 2 ClF(g) + O2(g) → Cl2O(g) + OF2(g)

ΔH ° = 167.5 kJ

2. 2 F2(g) + O2(g) → 2 OF2(g)

ΔH ° = −43.5 kJ

3. 2 ClF3(l) + 2 O2(g) → Cl2O(g) + 3 OF2(g)

ΔH ° = 394.1 kJ

(A) (B) (C) (D) (E)

+270.2 kJ −135.1 kJ 0.0 kJ −270.2 kJ +135.1 kJ


29. Choose the reaction expected to have the greatest increase in entropy. (A) (B) (C) (D) (E)

N2(g) + O2(g) → 2 NO(g) CO2(g) → CO2(s) 2 XeO3(s) → 2 Xe(g) + 3 O2(g) 2 K(s) + F2(g) → 2 KF(s) C(s) + O2(g) → CO2(g)

30. A certain reaction is nonspontaneous under standard conditions, but becomes spontaneous at lower temperatures. What conclusions may be drawn under standard conditions? (A) (B) (C) (D) (E)

ΔH > 0, ΔS > 0 and ΔG > 0 ΔH < 0, ΔS < 0 and ΔG = 0 ΔH < 0, ΔS > 0 and ΔG > 0 ΔH < 0, ΔS < 0 and ΔG > 0 ΔH > 0, ΔS < 0 and ΔG > 0

36. The exact position of an electron is not known. 37. Nitrogen atoms, in their ground state, are paramagnetic. 38. An atomic orbital can hold no more than two electrons. 39. The 4s orbital fills before the 3d. 40. Magnesium reacts with element X to form an ionic compound. If the ground-state electron 2 2 3 configuration of X is 1s 2s 2p , what is the simplest formula for this compound? (A) (B) (C) (D) (E)

MgX2 Mg2X3 Mg3X2 MgX Mg2X

Chapter 10

Chapter 11

31. Which of the following groups contains only atoms that are paramagnetic in their ground state?

41. VSEPR predicts that an IF5 molecule will be which of the following shapes?

(A) (B) (C) (D) (E)

Be, O, and N Mg, He, and Rb K, C, and Fe Br, Sb, and Kr S, Zn, and F

The following ground-state electron configurations are to be used for questions 32–35: (A) (B) (C) (D) (E)

2 6 2 3 1s 1p 2s 2p 2 2 6 2 6 2 10 6 2 1s 2s 2p 3s 3p 4s d 4p 5s 2 2 6 2 6 3 1s 2s 2p 3s 3p 3d 1s22s22p5 1s22s22p63s23p64s23d104p6

32. This is the configuration of a transition metal ion. 33. This is the configuration of a noble gas. 34. The halogen in this group. 35. This is an impossible electron configuration. The following answers are to be used for questions 36–39: (A) (B) (C) (D) (E)

Pauli exclusion principle electron shielding the wave properties of matter Heisenberg uncertainty principle Hund’s rule

(A) (B) (C) (D) (E)

tetrahedral trigonal bipyramidal square pyramid trigonal planar square planar

42. Which of the following does not have one or more π bonds? (A) (B) (C) (D) (E)

SO2 SF6 O2 SO3 O3

43. Which of the following is nonpolar? (A) (B) (C) (D) (E)

IF5 BrF3 CF4 SF4 OF2

44. The only substance listed below that contains ionic, σ, and π bonds is: (A) (B) (C) (D) (E)

Na3N NO2 NaNO3 NH3 HNO3

22 U STEP 2. Determine Your Test Readiness 45. Which molecule or ion in the following list has the greatest number of unshared electron pairs around the central atom? (A) (B) (C) (D) (E)

SO2 2− CO3 XeF2 CF4 H2O

46. What types of hybridization of carbon are in the compound acetic acid, CH3COOH? 3

I. sp II. sp2 III. sp (A) (B) (C) (D) (E)

I, II, and III I only I and II II and III II only

Chapter 12 Choose from the following descriptions of solids for questions 47–50. (A) composed of atoms held together by delocalized electrons (B) composed of molecules held together by intermolecular dipole–dipole interactions (C) composed of positive and negative ions held together by electrostatic attractions (D) composed of macromolecules held together by strong bonds (E) composed of molecules held together by intermolecular London forces 47. Graphite 48. Ca(s) 49. CaCO3(s) 50. SO2(s)

51. The critical point on a phase diagram represents (A) the highest temperature and pressure where a substance can sublime (B) the highest temperature and pressure where the substance may exist as discrete solid and gas phases (C) the temperature and pressure where the substance exists in equilibrium as solid, liquid, and gas phases (D) the highest temperature and pressure where the substance may exist as discrete liquid and gas phases (E) the highest temperature and pressure where the substance may exist as discrete liquid and solid phases Choose the appropriate answer from the following list for questions 52 and 53. (A) (B) (C) (D) (E)

London dispersion forces covalent bonding hydrogen bonding metallic bonding ionic bonding

52. This is why copper is ductile. 53. This is why acetic acid molecules exist as dimers in the gaseous phase. 54. For the following, pick the answer that most likely represents their relative solubilities in water. (A) CH3CH2CH2OH < HOCH2CH2OH < CH3CH2CH2CH3 (B) CH3CH2CH2CH3 < HOCH2CH2OH < CH3CH2CH2OH (C) CH3CH2CH2CH3 < CH3CH2CH2OH < HOCH2CH2OH (D) CH3CH2CH2OH < CH3CH2CH2CH3 < HOCH2CH2OH (E) HOCH2CH2OH < CH3CH2CH2OH < CH3CH2CH2CH3


E Pressure

C

A B D

55. Which point on the above diagram represents the triple point?

Chapter 13 56. A solution is prepared by dissolving 0.500 mol of NaCl in 500.0 g of water. Which of the following would be the best procedure to determine the molarity of the solution? (A) Measure the volume of the solution. (B) Titrate the solution with standard silver nitrate solution. (C) Determine the freezing point of the solution. (D) Determine the osmotic pressure of the solution. (E) Measure the mass of the solution. 57. A chemist needs 800 mL of a 0.50 M bromide − ion, Br , solution. She has 800 mL of a 0.20 M KBr solution. How many moles of solid MgBr2 will she need to add to increase the concentration to the desired value? 0.24 0.50 0.30 0.12 0.15

(A) (B) (C) (D) (E)

0.16 0.84 0.19 0.87 0.50

59. How many grams of HNO3 (molecular weight 63.0) are in 500.0 mL of a 5.00 M solution? Temperature

(A) (B) (C) (D) (E)

58. A solution of pentane, C5H12, in carbon tetrachloride, CCl4, is nearly ideal. The vapor pressure of pentane is 450 mm Hg at 20°C, and the vapor pressure of carbon tetrachloride is 87 mm Hg at this temperature. What is the mole fraction of carbon tetrachloride in the vapor over an equimolar solution of these two liquids?

(A) (B) (C) (D) (E)

31.5 g 63.0 g 5.00 g 315 g 158 g

60. Which of the following aqueous solutions would have the greatest freezing point depression? (A) (B) (C) (D) (E)

0.15 M NH4Br 0.15 M Ca(C2H3O2)2 0.15 M KIO3 0.15 M KC2H3O2 0.15 M C2H4(OH)2

Chapter 14 61. Step 1: 2 NO2(g) → N2(g) + 2 O2(g) Step 2: 2 CO(g) + O2(g) → 2 CO2(g) Step 3: N2(g) + O2(g) → 2 NO(g) The above represents a proposed mechanism for the reaction of NO2 with CO. What are the overall products of the reaction? (A) (B) (C) (D) (E)

N2 and O2 O2 and CO2 N2 and NO NO only NO and CO2

24 U STEP 2. Determine Your Test Readiness 62. The difference in energy between the transition state and the reactants is (A) (B) (C) (D) (E)

the kinetic energy the activation energy the free energy the reaction energy the heat of reaction

INITIAL RATE INITIAL INITIAL OF FORMATION [OH−] OF ClO2− [ClO2] −1 −1 EXPERIMENT (mol L ) (mol L ) (mol L−1 s−1)

1

0.100

0.100

2.30 × 105

2

0.200

0.100

9.20 × 105

3

0.200

0.200

1.84 × 106 −

The reaction is 2ClO2(aq) + 2OH−(aq) → ClO2 (aq) − + ClO3 (aq) + H2O(l). What is the rate law for this reaction? (A) (B) (C) (D) (E)

− 2

Rate = k[ClO2] [OH ] Rate = k[ClO2] 2 − Rate = k[ClO2] [OH ] − 2 Rate = k[OH ] Rate = k[ClO2][OH− ]

Chapter 15 64. Which of the following CANNOT behave as both a Brønsted base and a Brønsted acid? (A) (B) (C) (D) (E)

7.2 × 10−3 6.3 × 10−8 4.2 × 10−13

H3PO4 − H2PO4 2− HPO4

(A) (B) (C) (D) (E)

K2HPO4 + K3PO4 H3PO4 + KH2PO4 K3PO4 K2HPO4 K2HPO4 + KH2PO4

67. What is the ionization constant, Ka, for a weak monoprotic acid if a 0.5-molar solution has a pH of 5.0? (A) (B) (C) (D) (E)

−4

3 × l0 2 × l0−10 7 × l0−8 1 × 10−6 5 × l0−5

Questions 68–71 refer to the following aqueous solutions. All concentrations are 1 M. (A) KBr (potassium bromide) and HBr (hydrobromic acid) (B) H2C2O4 (oxalic acid) and KHC2O4 (potassium hydrogen oxalate) (C) NH3 (ammonia) and NH4NO3 (ammonium nitrate) (D) (CH3)2NH (dimethylamine) and HC2H3O2 (acetic acid) (E) (CH3)2NH (dimethylamine) and Ca(OH)2 (calcium hydroxide)

−

HCO3 2− HPO4 − HSO4 2− CO3 − HC2O4

65. A species, molecule, or ion is called a Lewis base if it does which of the following? (A) (B) (C) (D) (E)

Ka, acid dissociation constant

Using the above information, choose the best answer for preparing a pH = 8.5 buffer.

63. The table below gives the initial concentrations and rates for three experiments.

2

66. Acid

+ It donates an H . + It accepts an H . + It increases the H (aq) in water. It donates a pair of electrons. It accepts a pair of electrons.

68. The most acidic solution (lowest pH) 69. The solution with a pH nearest 7 70. A buffer with a pH > 7 71. A buffer with a pH < 7 72. Determine the OH−(aq) concentration in 0.0010 M pyridine (C5H5N) solution. (The Kb for pyri−9 dine is 9 × 10 .) (A) (B) (C) (D) (E)

−6 5 × 10 M −3 1 × 10 M −6 3 × 10 M −9 9 × 10 M −7 7 × 10 M


73. SnS( s) + 2H + (aq ) Sn 2+ (aq ) + H 2 S(aq ) What is the equilibrium constant for the above reaction? The successive acid dissociation con−8 −19 stants for H2S are 9.5 × 10 (K a1) and 1 × 10 (K a2). The Ksp, the solubility product constant, −25 for SnS equals 1.0 × 10 . (A) (B) (C) (D) (E)

−8 −25 9.5 × 10 /1.0 × 10 9.5 × 10−27/1.0 × 10−25 1.0 × 10−25/9.5 × 10−27 1 × l0−19/1.0 × 10−25 1.0 × 10−25/9.5 × 10−8

74. N 2O4 ( g ) 2NO2 ( g ) endothermic An equilibrium mixture of the compounds is placed in a sealed container at 150°C. The amount of the product may be increased by which of the following changes? I. Adding 1 mole of Ar(g) to the container II. Increasing the volume of the container III. Raising the temperature of the container (A) (B) (C) (D) (E)

III only II and III II only II and III I only −9

75. The Ksp for LaF3 is 2 × 10 . What is the molar solubility of this compound in water? (A) 2 × 10−9 /27 (B)

2 × 10

(C)

2

2 × 10−19

(A) (B) (C) (D) (E)


2+ 3+ 4+ 2+ 78. Sn + 2 Fe → Sn + 2 Fe

The reaction shown above was used in an electrolytic cell. The voltage measured for the cell was not equal to the calculated E° for the cell. This discrepancy could be caused by which of the following? (A) Both of the solutions were at 25°C instead of 0°C. (B) The anode and cathode were different sizes. (C) The anion in the anode compartment was chloride instead of nitrate, as in the cathode compartment. (D) One or more of the ion concentrations was not 1 M. (E) The solution in the salt bridge was Na2SO4 instead of KNO3. Questions 79–80 are concerned with the following half-reaction in an electrolytic cell: + − 2 SO4 + 10 H + 8 e → S2O3 + 5 H2O 2−

2−

79. Choose the correct statement from the following list.

−19

4

77. How many moles of Au may be deposited on the cathode when 0.60 Faradays of electricity is 3+ passed through a 1.0 M solution of Au ?

(A) (B) (C) (D) (E)

4 −9 (D) 2 × 10 /27 −19 (E) 2 × 10

Chapter 16 −

76. I−(aq) + H+(aq) + MnO4 (aq) → Mn2+(aq) + H2O(l) + I2(s) What is the coefficient of H+ when the above reaction is balanced? (A) 12 (B) 32 (C) 16 (D) 8 (E) 2

The sulfur is oxidized. This is the cathode reaction. The oxidation state of sulfur does not change. + The H serves as a catalyst. This is the anode reaction.

80. If a current of 0.60 amperes is passed through the electrolytic cell for 0.75 hours, how should you 2− calculate the grams of S2O3 formed? (A) (B) (C) (D) (E)

(0.60)(0.75)(3600)(112) / (96500)(8) (0.60)(0.75)(3600)(112) / (96500)(10) (0.60)(0.75)(60)(32) / (96500)(8) (0.60)(0.75)(3600)(112) / (10) (0.60)(0.75)(32) / (96500)(8)


Chapter 17

Chapter 18

81. When 226 88 Ra decays, it emits 2 α particles, then a β particle, followed by an α particle. The resulting nucleus is:

85. Alkenes are hydrocarbons with the general formula CnH2n. If a 1.40-g sample of any alkene is combusted in excess oxygen, how many moles of water will form?

(A) (B) (C) (D) (E)

212 83 222 86 214 82 214 83 212 85

Bi Rn Pb Bi At

82. Which of the following lists the types of radiation in the correct order of increasing penetrating power? (A) (B) (C) (D) (E)

α, γ, β β, α, γ α, β, γ β, γ, α γ, β, α

83. What is the missing product in the following nuclear reaction? 236 92

(A) (B) (C) (D) (E)

99 39 96 38 96 39 98 40 98 41

U → 4 10 n + 13653 I + ___

Y S Y Zr Nb

84. If 75% of a sample of pure 31 H decays in 24.6 yr, what is the half-life of 31 H? (A) (B) (C) (D) (E)

24.6 yr 18.4 yr 12.3 yr 6.15 yr 3.07 yr

(A) (B) (C) (D) (E)

0.2 0.1 1.5 0.7 0.05

86. What type of compound is shown below? O

H—C —CH2 —CH3

(A) (B) (C) (D) (E)

an alcohol an aldehyde a ketone an ester an alkane

Chapter 19 Questions on this chapter are incorporated into the chapters concerning the specific experiments.


U Answers and Explanations Chapter 5

15. A—H2C2O4 is the limiting reagent.

1. D—The others form anions. 2. B—Decreasing radii for increasing charges, or for going up a column (with equal charges), or moving towards the right in a period of the periodic table. (Note: This explanation would not be sufficient for the free response portion of the test.)

⎛ 2 mol MnSO 4 ⎞ ( 2.5 mol H 2C 2O 4 ) ⎜ ⎟ ⎝ 5 mol H 2C 2O 4 ⎠ 16. A—(0.400 mol Ba)(l mol H2/l mol Ba) (22.4 L/mol)

Chapter 8 17. E—This is an application of Charles’s law.

3. C—The element that is furthest from F. 3+

4. E—Hexaammine = (NH3)6; cobalt(III) = Co ; and nitrate = NO3−. 5. D—This was determined by bombarding gold foil with alpha particles.

Chapter 6 6. A—All others, except D, are Lewis bases. D is neither a Lewis acid nor a Lewis base. 7. A.

18. D—The heavier gas is moving more slowly. 19. E—The basic difference between ideal and real gases. 20. D—(13.5 g Al)(1 mol Al/27.0 g Al) (3 mol H2/2 mol Al)(22.4 L/mol H2) 21. A—The mole fraction of CO times the total pressure yields the partial pressure. The mole fraction of CO is the moles of CO divided by the total moles. 22. A—n = PV/RT = (0.993 atm)(0.237 L)/ (0.0821 L atm/K mol)(373 K) −3 = 7.69 × 10 mol −3 molar mass = 0.548 g/7.69 × 10 mol = 71.3g/mol

3 Mn(OH)2(s) + 2 H3AsO4(aq) → Mn3(AsO4)2(s) + 6 H2O(l) 8. E—PbSO4 forms. 2+ 9. A—[Cu(NH3)4] forms.

10. C—Fe(OH )3 forms. 11. D—Ca(OH)2, NaOH, and Na2CO3 are strong electrolytes and should be separated. Cancel all + – spectator ions (Na and OH ). 12. C—The hydroxide took some of the iron with it, 2+ so Fe will be low. The nitrate is double the potassium because there are two nitrates per iron(II) nitrate instead of one, as in potassium hydroxide.

Chapter 7 13. C—(0.1000 mol Cr2O72−/1000 mL) (45.20 mL) 2+ (6 mol Fe /1 mol Cr2O72−)(1/75.00 mL) (1000 mL/L) 14. E—Percent Mn in each oxide: (A)77.4; (B) 69.6; (C) 72.0; (D) 63.2; (E) 49.5.

23. A—The molar mass of the gas must be the square of the molar mass of helium.

Chapter 9 24. E—Definition. 25. C—Basic postulate of kinetic molecular theory. 26. A—One of the properties of free energy. 27. B—Definition. 28. B. [2 ClF(g)+O2 ( g ) → Cl 2O(g)+OF2 (g )] 1

2

[ 2F2 ( g ) + O2 ( g ) → 2OF2 ( g )] 1

1

2

(167.5 kJ)

2

(−43.5 kJ)

2

1

[Cl 2O(g)+3 OF2 (g ) → 2 ClF3 ( l ) + 2 O2 ( g )]

− 1 2 (394.1 kJ)

ClF(g) + F2(g) → ClF3(l)

−135.1 kJ

1

2

28 U STEP 2. Determine Your Test Readiness 29. C—The one with the greatest increase in the moles of gas.

Chapter 12

30. D—Nonspontaneous means ΔG > 0. Becoming spontaneous at lower temperature means ΔH < 0 and ΔS < 0.

47. D—Both graphite and diamond are covalentnetwork solids.

Chapter 10

49. C—Calcium carbonate is ionic.

48. A—Calcium is a metal, and answer A applies to metallic bonding.

50. B—This is a polar molecule.

31. C—Atoms with completely filled shells or subshells are not paramagnetic. These are: Be, Mg, He, Kr, and Zn. 0

3+

32. C—Transition metal ions are s . C could be Cr . 2

6

33. E—Noble gases, except helium, are ns np . In this case, n = 4. 2

5

34. D—Halogens are ns np . In this case, the halogen is F.

51. D—Definition. 52. D—This is a consequence of metallic bonding. 53. C—The carbonyl and −OH groups are capable of participating in hydrogen bonds. 54. C—The more −OH groups, the more hydrogen bonding, and the more soluble in water. 55. B—Definition.

35. A—The 1p orbital does not exist.

Chapter 13

36. D—Definition. 37. E—The electrons enter the 2p orbitals individually. 38. A—Definition.

56. A—Molarity is moles per liter, and the moles are already known.

39. B—The d orbitals are less effectively shielded than the s orbitals.

57. D—(0.800 L)(0.50 mol Br /L) = 0.40 mol needed.

2+ 40. C—Mg becomes Mg . The element is N, which 3− can become N .

(0.800 L)(0.20 mol Br /L) = 0.16 mol present.

−

−

−

(0.24 mol Br to be added) − (1 mol MgBr2/2 mol Br )

Chapter 11 41. C—The iodine has five bonding pairs and one lone pair. 42. B—This is the only one with only single bonds. 43. C—Use VSEPR. 44. C—The only ionic bonds are the sodium compounds. The nitride ion has no internal bonding, but the nitrate ion has σ and π bonds. 45. C—Numbers of unshared pairs: (A) 1; (B) 0; (C) 3; (D) 0; (E) 2 3

46. C—The carbon on the left is sp , and the other 2 is sp .

58. A—Mole fraction of each = 0.5 since the solution is equimolar. Vapor pressure of CCl4 = 0.5 (87 mm Hg) = 43.5 mm Hg Vapor pressure of pentane = 0.5 (450 mm Hg) = 225 mm Hg Mole fraction of CCl4 in vapor = 43.5 mm Hg/(43.5 + 225) mm Hg 59. E—(0.5000 L)(5.00 mol/L)(63.0 g/mol) = 158 g 60. B—Since all the molalities are the same, look for the one that produces the most ions.


Chapter 14

Chapter 16

61. E—Add the equations and cancel anything that appears on both sides of the reaction arrows.

76. C—10 I−(aq) + 16 H+(aq) + 2 MnO4−(aq) 2+ → 2 Mn (aq) + 8 H2O(l) + 5 I2(s)

62. B—Definition.

77. D—(0.60 F)(1mol Au/3 F) = 0.20 moles

63. C—The table shows second order in chlorine dioxide and first order in hydroxide ion.

78. D—The cell must be nonstandard. This could be due to variations in temperature (not 25°C) or concentrations (1M) that are not standard.

Chapter 15

79. B—A reduction is shown. Reductions take place at the cathode.

64. D—The carbonate ion has no H+ to donate to be an acid.

80. A—Use dimensional analysis:

65. D—Definition.

2− (0.60 coul/s)(0.75 h)(3600 s/h) (112 g S2O3 / 2− 2− mol S2O3 )/(96500 coul/F) (8 F/mol S2O3 )

66. E—Start with the one with a pKa as near 8.5 as possible (H2PO4−). To go to a higher pH, the HPO42− ion is needed.

Chapter 17

67. B—This is an approximation. −5 2 Ka = (10 ) /0.5

81. D—The mass should be 226 − (4 + 4 + 0 + 4) = 214. The atomic number should be 88 − (2 + 2 − 1 + 2) = 83.

68. A—HBr is a strong acid. 69. D—The weak acid and weak base give a nearly neutral solution. 70. C—Only B and C are buffers. B is acidic and C is basic. 71. B—Only B and C are buffers. B is acidic and C is basic. −

−9 1/2

−12 l/2

72. C—[OH ] = (0.0010 × 9 × 10 ) / = (9 × 10 ) 73. C—K = Ksp/Ka1Ka2 74. B—I yields no change. 3+

− 3

3

4

75. D—Ksp = [La ] [F ] = [x][3x] = 27x . Solve for x.

82. C—Alpha particles are the least penetrating, and gamma rays are the most penetrating. 83. C—Mass difference = 236 − 4(1) − 136 = 96. Atomic number difference = 92 − 4(0) − 53 = 39. 84. C—After one half-life, 50% would remain. After another half-life this would be reduced by 1⁄2 to 25%. The total amount decayed is 75%. Thus, 24.6 years must be two half-lives of 12.3 years each.

Chapter 18 85. B—(1.40 g) (1 mol/14 g) 86. B.


Scoring and Interpretation Now that you have finished and scored the diagnostic exam, it is time for you to learn what it all means. First, note any area where you had difficulty. This should not be limited to unfamiliar material. You should do this even if you got the correct answer. Determine where this material is covered in the book. Plan to spend additional time on the chapter in question. There is material you may not recognize because you have not gotten that far in class. The following relation determines the baseline score. N represents the number of answers. Ignore those you left blank. (Ncorrect − 1/4 Nincorrect = raw score for the multiple-choice section) There are no free-response questions on this diagnostic exam; such questions are not useful at this point. There will be examples of free-response questions later in this book. We will use the multiple-choice questions to provide an estimate of your preparation. This is a simplified approach based on these questions. Do not try to do more than use these results as a guide. Raw Score

Approximate AP Score

50–86

5

37–49

4

27–36

3

16–26

2

0–15

1

If you did better than you expected—great! Be careful not to become overconfident. Much more will need to be done before you take the AP Chemistry exam. If you did not do as well as you liked, don’t panic. There is plenty of time for you to prepare for the exam. This is a guide to allow you to know which path you need to follow. No matter what your results were, you are about to begin your 5 steps to a 5. Good Luck!

STEP

3

Develop Strategies for Success CHAPTER

4

How to Approach Each Question Type


CHAPTER

4

How to Approach Each Question Type IN THIS CHAPTER Summary: Use these question-answering strategies to raise your AP score. Key Ideas Multiple-Choice Questions KEY IDEA

% % % % % %

Read the question carefully. Try to answer the question yourself before reading the answer choices. Guess only if you can eliminate one or more answer choices. Drawing a picture can help. Don’t spend too much time on any one question. In-depth calculations are not necessary; approximate the answer by rounding.

Free-Response Questions % Write clearly and legibly. % Be consistent from one part of your answer to another. % Draw a graph if one is required. % If the question can be answered with one word or number, don’t write more. % If a question asks “how,” tell “why” as well.

Multiple-Choice Questions STRATEGY

Because you are a seasoned student accustomed to the educational testing machine, you have surely participated in more standardized tests than you care to count. You probably Í 33

34 U STEP 3. Develop Strategies for Success know some students who always seem to ace the multiple-choice questions, and some students who would rather set themselves on fire than sit for another round of “bubble trouble.” We hope that, with a little background and a few tips, you might improve your scores on this important component of the AP Chemistry exam. First, the background. Every multiple-choice question has three important parts: 1. The stem is the basis for the actual question. Sometimes this comes in the form of a fill-in-the-blank statement, rather than a question. Example: The mass number of an atom is the sum of the atomic number

and ________ Example: What two factors lead to real gases deviating from the predictions of

Kinetic Molecular Theory? 2. The correct answer option. Obviously, this is the one selection that best completes the statement, or responds to the question in the stem. Because you have purchased this book, you will select this option many, many times. 3. Distracter options. Just as it sounds, these are the incorrect answers intended to distract anyone who decided not to purchase this book. You can locate this person in the exam room by searching for the individual who is repeatedly smacking his or her forehead on the desktop. Students who do well on multiple-choice exams are so well prepared that they can easily find the correct answer, but other students do well because they are perceptive enough to identify and avoid the distracters. Much research has been done on how best to study for, and complete, multiple-choice questions. You can find some of this research by using your favorite Internet search engine, but here are a few tips that many chemistry students find useful. 1. Let’s be careful out there. You must carefully read the question. This sounds obvious, but you would be surprised how tricky those test developers can be. For example, rushing past, and failing to see, the use of a negative, can throw a student. Example: Which of the following is not true of the halogens?

a. b. c. d. e.

They are nonmetals. They forms monatomic anions with a −1 charge. In their standard states they may exist as solids, liquids, or gases. All may adopt positive oxidation states. They are next to the noble gases on the periodic table.

A student who is going too fast, and ignores the negative not, might select option (a), because it is true and it was the first option that the student saw. You should be very careful about the wording. It is easy to skip over small words like “not,” “least,” or “most.” You must make sure you are answering the correct question. Many students make this type of mistake—do not add your name to the list. 2. See the answer, be the answer. Many people find success when they carefully read the question and, before looking at the alternatives, visualize the correct answer. This allows the person to narrow the search for the correct option, and identify the distracters. Of course, this visualization tip is most useful for students who have used this book to thoroughly review the chemistry content.

How to Approach Each Question Type Í 35 Example: When Robert Boyle investigated gases, he found the relationship

between pressure and volume to be _________ Before you even look at the options, you should know what the answer is. Find that option, and then quickly confirm to yourself that the others are indeed wrong. 3. Never say never. Words like “never” and “always” are absolute qualifiers. If these words are in one of the choices, it is rarely the correct choice. Example: Which of the following is true about a real gas?

a. There are never any interactions between the particles. b. The particles present always have negligible volumes. If you can think of any situation where the statements in (a) and (b) are untrue, then you have discovered distracters and can eliminate these as valid choices. 4. Easy is as easy does. It’s exam day and you’re all geared up to set this very difficult test on its ear. Question number one looks like a no-brainer. Of course! The answer is 7, choice c. Rather than smiling at the satisfaction that you knew the answer, you doubt yourself. Could it be that easy? Sometimes they are just that easy. 5. Sometimes, a blind squirrel finds an acorn. Should you guess? If you have absolutely no clue which choice is correct, guessing is a poor strategy. With five choices, your chance of getting the question wrong is 80%, and every wrong answer costs you 1/4 of a point. In this case, leave it blank with no penalty. Guessing becomes a much better gamble if you can eliminate even one obviously incorrect response. If you can narrow the choices down to three possibilities by eliminating obvious wrong answers, you might just find that acorn. 6. Draw it, nail it. Many questions are easy to answer if you do a quick sketch in the margins of your test book. Hey, you paid for that test book; you might as well use it. Example: The rate of the reverse reaction will be slower than the rate of the

forward reaction if the relative energies of the reactants and products are:

a. b. c. d. e.

Reactant

Product

High Low High Low High

Equal to the reactants Equal to the reactants Higher than the reactants Higher than the reactants Lower than the reactants

These types of question are particularly difficult, because the answer requires two ingredients. The graph speaks for itself. 7. Come back, Lassie, come back! Pace yourself. If you do not immediately know the answer to a question—skip it. You can come back to it later. You have approximately 72 seconds per question. You can get a good grade on the test even if you do not finish all the questions. If you spend too much time on a question you may get it correct; however, if you had gone on you might get several questions correct in the same amount of time. The more questions you read, the more likely you are to find the ones for which you know the answers. You can help yourself on this timing by practice.

36 U STEP 3. Develop Strategies for Success Times are given for the various tests in this book; if you try to adhere strictly to these times, you will learn how to pace yourself automatically. 8. Timing is everything, kid. You have about 72 seconds for each of the 75 questions. Keep an eye on your watch as you pass the halfway point. If you are running out of time and you have a few questions left, skim them for the easy (and quick) ones so that the rest of your scarce time can be devoted to those that need a little extra reading or thought. 9. Think! But do not try to outthink the test. The multiple-choice questions are straightforward—do not over-analyze them. If you find yourself doing this, pick the simplest answer. If you know the answer to a “difficult” question—give yourself credit for preparing well; do not think that it is too easy, and that you missed something. There are easy questions and difficult questions on the exam. 10. Change is good? You should change answers only as a last resort. You can mark your test so you can come back to a questionable problem later. When you come back to a problem make sure you have a definite reason for changing the answer. Other things to keep in mind: Take the extra half of a second required to fill in the bubbles clearly. Don’t smudge anything with sloppy erasures. If your eraser is smudgy, ask the proctor for another. Absolutely, positively, check that you are bubbling the same line on the answer sheet as the question you are answering. I suggest that every time you turn the page you double check that you are still lined up correctly. G G

G

Free-Response Questions STRATEGY

Your score on the free-response questions (FRQs) amounts to one-half of your grade and, as long-time readers of essays, we assure you that there is no other way to score highly than to know your stuff. While you can guess on a multiple-choice question and have a 1/5 chance of getting the correct answer, there is no room for guessing in this section. There are, however, some tips that you can use to enhance your FRQ scores. 1. Easy to read—easy to grade. Organize your responses around the separate parts of the question and clearly label each part of your response. In other words, do not hide your answer; make it easy to find and easy to read. It helps you and it helps the reader to see where you are going. Trust me: helping the reader can never hurt. Which leads me to a related tip . . . Write in English, not Sanskrit! Even the most levelheaded and unbiased reader has trouble keeping his or her patience while struggling with bad handwriting. (We have actually seen readers waste almost 10 minutes using the Rosetta stone to decipher a paragraph of text that was obviously written by a time-traveling student from the Egyptian Empire.) 2. Consistently wrong can be good. The free-response questions are written in several parts, each building upon the first. If you are looking at an 8-part question, it can be scary. However, these questions are graded so that you can salvage several points even if you do not correctly answer the first part. The key thing for you to know is that you must be consistent, even if it is consistently wrong. For example, you may be asked to draw a graph showing a phase diagram. Following sections may ask you to label the triple point, critical point, normal boiling point, and vapor pressure—each determined by the appearance of your graph. So let’s say you draw your graph, but you label it incorrectly.

How to Approach Each Question Type Í 37

Obviously, you are not going to receive that point. However, if you proceed by labeling the other points correctly in your incorrect quantity, you would be surprised how forgiving the grading rubric can be. 3. Have the last laugh with a well-drawn graph. There are some points that require an explanation (i.e. “Describe how . . .”) Not all free-response questions require a graph, but a garbled paragraph of explanation can be saved with a perfect graph that tells the reader you know the answer to the question. This does not work in reverse . . . 4. If I say draw, you had better draw. There are what readers call “graphing points” and these cannot be earned with a well-written paragraph. For example, if you are asked to draw a Lewis structure, certain points will be awarded for the picture, and only the picture. A delightfully written and entirely accurate paragraph of text will not earn the graphing points. You also need to label graphs clearly. You might think that a downward-sloping line is obviously a decrease, but some of those graphing points will not be awarded if lines and points are not clearly, and accurately, identified. 5. Give the answer, not a dissertation. There are some parts of a question where you are asked to simply “identify” something. This type of question requires a quick piece of analysis that can literally be answered in one word or number. That point will be given if you provide that one word or number whether it is the only word you write, or the fortieth. For example, you may be given a table that shows how a reaction rate varies with concentration. Suppose the correct rate is 2. The point is given if you say “2,” “two,” and maybe even “ii.” If you write a novel concluding with the word “two,” you will get the point, but you have wasted precious time. This brings me to . . . 6. Welcome to the magic kingdom. If you surround the right answer to a question with a paragraph of chemical wrongness, you will usually get the point, so long as you say the magic word. The only exception is a direct contradiction of the right answer. For example, suppose that when asked to “identify” the maximum concentration, you spend a paragraph describing how the temperature may change the solubility and the gases are more soluble under increased pressure, and then say the answer is two. You get the point! You said the “two” and “two” was the magic word. However, if you say that the answer is two, but that it is also four, but on Mondays, it is six, you have contradicted yourself and the point will not be given. 7. “How” really means “how” and “why.” Questions that ask how one variable is affected by another—and these questions are legion—require an explanation, even if the question doesn’t seem to specifically ask how and why. For example, you might be asked to explain how effective nuclear charge affects the atomic radius. If you say that the “atomic radius decreases,” you may have only received one of two possible points. If you say that this is “because effective nuclear charge has increased,” you can earn the second point. 8. Read the question carefully. The free-response questions tend to be multipart questions. If you do not fully understand one part of the question, you should go on to the next part. The parts tend to be stand-alone. If you make a mistake in one part, you will not be penalized for the same mistake a second time. 9. Budget your time carefully. Spend 1–2 minutes reading the question and mentally outlining your response. You should then spend the next 3–5 minutes outlining your response. Finally, you should spend about 15 minutes answering the question. A common mistake is to overdo the answer. The question is worth a limited number of points. If your answer is twice as long, you will not get more points. You will lose time

38 U STEP 3. Develop Strategies for Success you could spend on the remainder of the test. Make sure your answers go directly to the point. There should be no deviations or extraneous material in your answer. 10. Make sure you spend some time on each section. Grading of the free-response questions normally involves a maximum of one to three points for each part. You will receive only a set maximum number of points. Make sure you make an attempt to answer each part. You cannot compensate for leaving one part blank by doubling the length of the answer to another part. You should make sure the grader is able to find the answer to each part. This will help to insure that you get all the points you deserve. There will be at least a full page for your answer. There will also be questions with multiple pages available for the answer. You are not expected to use all of these pages. In some cases, the extra pages are there simply because of the physical length of the test. The booklet has a certain number of pages. 11. Outlines are very useful. They not only organize your answer, but they also can point to parts of the question you may need to reread. Your outline does not need to be detailed: just a few keywords to organize your thoughts. As you make the outline, refer back to the question; this will take care of any loose ends. You do not want to miss any important points. You can use your outline to write a well-organized answer to the question. The grader is not marking on how well you wrote your answer, but a well-written response makes it easier for the grader to understand your answer and to give you all the points you deserve. 12. Grading depends on what you get right in your answer. If you say something that is wrong, it is not counted against you. Always try to say something. This will give you a chance for some partial credit. Do not try too hard and negate something you have already said. The grader needs to know what you mean; if you say something and negate it later, there will be doubt. 13. Do not try to outthink the test. There will always be an answer. For example, in the reaction question, “no reaction” will not be a choice. If you find yourself doing this, pick the simplest answer. If you know the answer to a “difficult” question—give yourself credit for preparing well; do not think that it is too easy, and that you missed something. There are easy questions and difficult questions on the exam. Questions concerning experiments may be incorporated into both the multiple-choice and free-response questions. Beginning with the 2007 AP Chemistry Exam, experimental questions may be incorporated into any of the free-response questions. This means that you will need to have a better understanding of the experiments in order to discuss not only the experiment itself, but also the underlying chemical concepts. 14. Be familiar with all the suggested experiments. It may be that you did not perform a certain experiment, so carefully review any that are unfamiliar in Chapter 19. Discuss these experiments with your teacher. 15. Be familiar with the equipment. Not only be familiar with the name of the equipment used in the experiment, but how it is used properly. For example, the correct use of a buret involves reading of the liquid meniscus. 16. Be familiar with the basic measurements required for the experiments. For example, in a calorimetry experiment you do not measure the change in temperature, you calculate it. You measure the initial and final temperatures.

How to Approach Each Question Type Í 39

17. Be familiar with the basic calculations involved in each experiment. Review the appropriate equations given on the AP Exam. Know which ones may be useful in each experiment. Also, become familiar with simple calculations that might be used in each experiment. These include calculations of moles from grams, temperature conversions, and so on. 18. Other things to keep in mind: G

G

G

G

Begin every free-response question with a reading period. Use this time well to jot down some quick notes to yourself, so that when you actually begin to respond, you will have a nice start. The first parts of the free-response questions are usually the easiest parts. Spend just enough time to get these points before moving on to the more difficult sections. The questions are written in logical order. If you find yourself explaining Part C before responding to Part B, back up and work through the logical progression of topics. Abbreviations are your friends. You can save time by using commonly accepted abbreviations for chemical variables and graphical curves. With practice, you will get more adept at their use. There are a number of abbreviations present in the additional information supplied with the test. If you use any other abbreviations, make sure you define them.


STEP

4

Review the Knowledge You Need to Score High 5 CHAPTER 6 CHAPTER 7 CHAPTER 8 CHAPTER 9 CHAPTER 10 CHAPTER 11 CHAPTER 12 CHAPTER 13 CHAPTER 14 CHAPTER 15 CHAPTER 16 CHAPTER 17 CHAPTER 18 CHAPTER 19 CHAPTER

Basics Reactions and Periodicity Stoichiometry Gases Thermodynamics Spectroscopy, Light, and Electrons Bonding Solids, Liquids, and Intermolecular Forces Solutions and Colligative Properties Kinetics Equilibrium Electrochemistry Nuclear Chemistry Organic Chemistry Experimental


CHAPTER

5 Basics

IN THIS CHAPTER Summary: This chapter on basic chemical principles should serve as a review if you have had a pre-AP chemistry course in school. We assume (and we all know about assumptions) that you know about such things as the scientific method, elements, compounds, and mixtures. We may mention elementary chemistry topics like this, but we will not spend a lot of time discussing them. When you are using this book, have your textbook handy. If we mention a topic and it doesn’t sound familiar, go to your textbook and review it in depth. We will be covering topics that are on the AP exam. There is a lot of good information in your text that is not covered on the AP exam, so if you want more, read your text. Keywords and Equations KEY IDEA

This section of each chapter will contain the mathematical equations and constants that are supplied to you on the AP exam. We have tried to use, as much as possible, the exact format that is used on the test.

T = temperature V = volume KE = kinetic energy

n = number of moles D = density t = time (seconds) −23

m = mass v = velocity

P = pressure M = molar mass

−1

Boltzmann’s constant, k = 1.38 × 10 J K −19 electron charge, e = −1.602 × 10 coulomb −1 1 electron volt per atom = 96.5 kJ mol

D=

m V

K = °C + 273

Avogadro’s number = 6.022 × 1023 mol−1

Í 43

44 U STEP 4. Review the Knowledge You Need to Score High

Units and Measurements Almost all calculations in chemistry involve both a number and a unit. One without the other is useless. Every time you complete a calculation, be sure that your units have cancelled and that the desired unit is written with the number. Always show your units!

Units The system of units used in chemistry is the SI system (Système International), which is related to the metric system. There are base units for length, mass, etc. and decimal prefixes that modify the base unit. Since most of us do not tend to think in these units, it is important to be able to convert back and forth from the English system to the SI system. These three conversions are useful ones, although knowing the others might allow you to simplify your calculations: mass: volume: length:

1 pound = 0.4536 kg (453.6 g) 3 1 quart = 0.9464 dm (0.9464 L) 1 inch = 2.54 cm (exact) 3

As shown above, the SI unit for volume is the cubic meter (m ), but most chemists use 3 the liter (L, which is equal to 1 cubic decimeter (dm )) or milliliter (mL). Appendix A lists the SI base units and prefixes, as well as some English–SI equivalents. We in the United States are used to thinking of temperature in Fahrenheit, but most of the rest of the world measures temperature in Celsius. On the Celsius scale water freezes at 0°C and boils at 100°C. Here are the equations needed to convert from Fahrenheit to Celsius and vice versa: 5 °C = [°F − 32] 9 9 °F = (°C ) + 32 5 Many times, especially in working with gases, chemists use the Kelvin scale. Water freezes at 273.15 K and boils at 373.15 K. To convert from Celsius to kelvin: K = °C + 273.15 Absolute zero is 0 K and is the point at which all molecular motion ceases. The density of a substance is commonly calculated in chemistry. The density (D) of an object is calculated by dividing the mass of the object by its volume. (Some authors will use a lowercase d to represent the density term; be prepared for either.) Since density is independent of the quantity of matter (a big piece of gold and a little piece have the same density), it can be used for identification purposes. The most common units for density in 3 chemistry are g/cm or g/mL.

Measurements We deal with two types of numbers in chemistry—exact and measured. Exact values are just that—exact, by definition. There is no uncertainty associated with them. There are exactly 12 items in a dozen and 144 in a gross. Measured values, like the ones you deal with in the lab, have uncertainty associated with them because of the limitations of our measuring instruments. When those measured values are used in calculations, the answer must reflect that combined uncertainty by the number of significant figures that are reported in the final answer. The more significant figures reported, the greater the certainty in the answer.

Basics Í 45

The measurements used in calculations may contain varying numbers of significant figures, so carry as many as possible until the end and then round off the final answer. The least precise measurement will determine the significant figures reported in the final answer. Determine the number of significant figures in each measured value (not the exact ones) and then, depending on the mathematical operations involved, round off the final answer to the correct number of significant figures. Here are the rules for determining the number of significant figures in a measured value: KEY IDEA

1. 2. 3. 4.

All non-zero digits (1, 2, 3, 4, etc.) are significant. Zeroes between non-zero digits are significant. Zeroes to the left of the first non-zero digit are not significant. Zeroes to the right of the last non-zero digit are significant if there is a decimal point present, but not significant if there is no decimal point.

Rule 4 is a convention that many of us use, but some teachers or books may use alternative methods. By these rules, 230500. would contain 6 significant figures, but 230500 would contain only 4. Another way to determine the number of significant figures in a number is to express it in scientific (exponential) notation. The number of digits shown is the number of −5 significant figures. For example 2.305 × 10 would contain 4 significant figures. You may need to review exponential notation. In determining the number of significant figures to be expressed in the final answer, the following rules apply: KEY IDEA

TIP

1. For addition and subtraction problems, the answer should be rounded off to the same number of decimal places as the measurement with the fewest decimal places. 2. For multiplication and division problems, round off the answer to the same number of significant figures in the measurement with the fewest significant figures. Remember: Carry as many numbers as possible throughout the calculation and only round off the final answer. The use of an improper number of significant figures may lower your score on the AP exam.

Dimensional Analysis—The Factor Label Method Dimensional analysis, sometimes called the factor label (unit conversion) method, is a method for setting up mathematical problems. Mathematical operations are conducted with the units associated with the numbers, and these units are cancelled until only the unit of the desired answer is left. This results in a setup for the problem. Then the mathematical operations can efficiently be conducted and the final answer calculated and rounded off to the correct number of significant figures. For example, to determine the number of centimeters in 2.3 miles: First, write down the initial data as a fraction: 2.3 mi 1 Convert from miles to feet: 2.3 mi 5280 ft × 1 1mi

46 U STEP 4. Review the Knowledge You Need to Score High Convert from feet to inches: 2.3 mi 1

5280 ft 1mi

12 in 1ft

Finally, convert from inches to centimeters: 2.3 mi 5280 ft 12 in 2.54cm × × × 1 1mi 1ft 1in The answer will be rounded off to 2 significant figures based upon the 2.3 miles, since all the other numbers are exact: 2.3 mi 5280 ft 12 in 2.54 cm × × × = 3.7 × 105 cm 1 1mi 1 ft 1in Sometimes on the AP exam, only setups will be given as possible answers. Write the correct setup to the problem and then see which one of the answers represents your answer. Remember: The units must cancel! KEY IDEA

Also: Make sure that the answer is legible and reasonable!

The States of Matter Matter can exist in one of three states: solid, liquid, or gas. A solid has both a definite shape and a definite volume. At the molecular level, the particles that make up a solid are close together and many times are locked into a very regular framework called a crystal lattice. Molecular motion exists, but it is slight. A liquid has a definite volume but no definite shape. It conforms to the container in which it is placed. The particles are moving much more than in the solid. There are usually clumps of particles moving relatively freely among other clumps. A gas has neither definite shape nor volume. It expands to fill the container in which it is placed. The particles move rapidly with respect to each other and act basically independently of each other. We will indicate the state of matter that a particular substance is in by a parenthetical s, l, or g. Thus, H2O(s) would represent solid water (ice), while H2O(g) would represent gaseous water (steam). For a more detailed discussion of solids, liquids and gases see Chapters 8 and 12.

The Structure of the Atom Historical Development The first modern atomic theory was developed by John Dalton and first presented in 1808. Dalton used the term atom (first used by Democritus) to describe the tiny, indivisible particles of an element. Dalton also thought that atoms of an element are the same and atoms of different elements are different. In 1897, J. J. Thompson discovered the existence of the first subatomic particle, the electron, by using magnetic and electric fields. In 1909, Robert Millikan measured the charge on the electron in his oil drop experiment (electron charge = −19 coulombs), and from that he calculated the mass of the electron. −1.6022 × 10

Basics Í 47

Thompson developed an atomic model, the raisin pudding model, which described the atom as being a diffuse positively charged sphere with electrons scattered throughout. Ernest Rutherford, in 1910, was investigating atomic structure by shooting positively charged alpha particles at a thin gold foil. Most of the particles passed through with no deflection, a few were slightly deflected, and every once in a while an alpha particle was deflected back towards the alpha source. Rutherford concluded from this scattering experiment that the atom was mostly empty space where the electrons were, and that there was a dense core of positive charge at the center of the atom that contained most of the atom’s mass. He called that dense core the nucleus.

Subatomic Particles Our modern theory of the atom describes it as an electrically neutral sphere with a tiny nucleus at the center, which holds the positively charged protons and the neutral neutrons. The negatively charged electrons move around the nucleus in complex paths, all of which comprise the electron cloud. Table 5.1 summarizes the properties of the three fundamental subatomic particles: Table 5.1 The Three Fundamental Subatomic Particles NAME

SYMBOL +

CHARGE

MASS (AMU)

MASS (G) −24

LOCATION

1+

1.007

1.673 × 10

n0

0

1.009

1.675 × 10−24

nucleus

e−

1−

5.486 × 10−4

9.109 × l0−28

outside nucleus

proton

p

neutron electron

nucleus

Many teachers and books omit the charges on the symbols for the proton and neutron. The amu (atomic mass unit) is commonly used for the mass of subatomic particles and atoms. An amu is 1⁄12 the mass of a carbon-12 atom, which contains 6 protons and 6 neutrons (C-12). Since the atom itself is neutral, the number of electrons must equal the number of protons. However, the number of neutrons in an atom may vary. Atoms of the same element (same number of protons) that have differing numbers of neutrons are called isotopes. A specific isotope of an element can be represented by the following symbolization: A Z

X

X represents the element symbol taken from the periodic table. Z is the atomic number of the element, the number of protons in the nucleus. A is the mass number, the sum of the protons and neutrons. By subtracting the atomic number (p) from the mass number (p + n), the number of neutrons may be determined. For example, 238 U (U-238) contains 92 92 protons, 92 electrons, and (238 − 92) 146 neutrons.

Electron Shells, Subshells, and Orbitals According to the latest atomic model, the electrons in an atom are located in various energy levels or shells that are located at different distances from the nucleus. The lower the number of the shell, the closer to the nucleus the electrons are found. Within the shells, the electrons are grouped in subshells of slightly different energies. The number associated with the shell is equal to the number of subshells found at that energy level. For example, energy

48 U STEP 4. Review the Knowledge You Need to Score High Table 5.2 Summary of Atomic Shell, Subshells, and Orbitals for Shells 1–4 SHELL (ENERGY LEVEL) SUBSHELL NUMBER OF ORBITALS ELECTRON CAPACITY

1

s

1

2 total

2

s

1

2

p

3

6 8 total

3

s

1

2

p

3

6

d

5

10 18 total

4

s

1

2

p

3

6

d

5

10

f

7

14 32 total

level 2 (shell 2) has two subshells. The subshells are denoted by the symbols s, p, d, f, etc. and correspond to differently shaped volumes of space in which the probability of finding the electrons is high. The electrons in a particular subshell may be distributed among volumes of space of equal energies called orbitals. There is one orbital for an s subshell, three for a p, five for a d, seven for an f, etc. Only two electrons may occupy an orbital. Table 5.2 summarizes the shells, subshells, and orbitals in an atom. The chapter on Spectroscopy, Light, and Electrons, Chapter 10 has a discussion of the origin of this system.

Energy-Level Diagrams The information above can be shown in graph form as an energy-level diagram, as shown in Figure 5.1: 5p

4d 5s 4p 3d 4s 3p 3s 2p 2s

1s

Figure 5.1

Energy-level diagram of an atom.

Basics Í 49

Be sure to fill the lowest energy levels first (Aufbau principle) when using the diagram above. In filling orbitals having equal energy, electrons are added to the orbitals to half fill them all before any pairing occurs (Hund’s rule). Sometimes it is difficult to remember the relative energy position of the orbitals. Notice that the 4s fills before the 3d. Figure 5.2 may help you remember the pattern in filling. Study the pattern and be able to reproduce it during the exam.

1s 2s

2p

3s

3p

3d

4s

4p

4d

4f

5s

5p

5d

5f

6s

6p

6d

7s

7p

Figure 5.2

Orbital filling pattern.

Following these rules, the energy-level diagram for silicon (Z = 14) can be written as shown in Figure 5.3

5p

4d 5s 4p 3d 4s 3p ↑

↑

2p ↑↓

↑↓

3s ↑↓

↑↓

2s ↑↓

1s ↑↓

Figure 5.3

Energy-level diagram for silicon.

50 U STEP 4. Review the Knowledge You Need to Score High Although this filling pattern conveys a lot of information, it is bulky. A shorthand method for giving the same information has been developed—the electronic configuration.

Electronic Configurations The electronic configuration is a condensed way of representing the pattern of electrons in an atom. Using the Aufbau build-up pattern that was used in writing the energy-level diagram, consecutively write the number of the shell (energy level), the type of orbital (s, p, d, etc.), and then the number of electrons in that orbital shown as a superscript. For 2 1 example, 1s 2s would indicate that there are two electrons in the s-orbital in energy level (shell) l, and one electron in the s-orbital in energy level 2. Looking at the energy-level diagram for silicon above, the electronic configuration would be written as: silicon : 1s 2 2s 2 2p6 3s 2 3p 2 The sum of all the superscripts should be equal to the number of electrons in the atom (the atomic number, Z). Electronic configurations can also be written for cations and anions.

Periodic Table

TIP

KEY IDEA

If chemistry students had to learn the individual properties of the 100+ elements that are now known, it would be a monumental and frustrating task. Early scientists had to do just that. Then several scientists began to notice trends in the properties of the elements and began grouping them in various ways. In 1871, a Russian chemist, Dmitri Mendeleev, introduced the first modern periodic table. He arranged the elements in terms of increasing atomic mass. He then arranged columns so that elements that had similar properties were in the same column. Mendeleev was able to predict the existence and properties of elements that were then unknown. Later, when they were discovered, Mendeleev’s predictions were remarkably accurate. Later the periodic table was rearranged to sequence the elements by increasing atomic number, not mass. The result is the modern periodic table shown in Figure 5.4. This is not the periodic table supplied on the AP exam. The one in this book has family and period labels. Become familiar with these labels so that you can effectively use the unlabeled one. You may wish to add labels to the one supplied with the AP exam. Each square on this table represents a different element and contains three bits of information. The first is the element symbol. You should become familiar with the symbols of the commonly used elements. Secondly, the square lists the atomic number of the element, usually centered above the element. This integer represents the number of protons in the element’s nucleus. The atomic number will always be a whole number. Thirdly, the square lists the element’s mass, normally centered underneath the element symbol. This number is not a whole number because it is the weighted average (taking into consideration abundance) of all the masses of the naturally occurring isotopes of that element. The mass number can never be less than the atomic number.

Arrangement of Elements There are a number of different groupings of elements on the periodic table that may be utilized. One system involves putting the elements into three main groups—metals, nonmetals, and metalloids (semimetals). Look at Figure 5.4. Notice the heavy, stair-stepped line starting at boron (B) and going downward and to the right. The elements to the left of that line (except for H, Ge, and Sb) are classified as metals. Metals are normally solids (mercury being an exception), shiny, and good conductors of heat and electricity. They can be hammered

Basics Í 51 Periodic Table of the Elements Classical group numbers Modern group numbers Periods

1 2 3

IA

IIA

IIIB

IVB

VB

VIB

VIIB

1

2

3

4

5

6

7

6 7

9

10

IIB

IIIA

IVA

VA

VIA

VIIA

0

11

12

13

14

15

16

17

18 2

1

H

He 4.00260

3

4

1

Li

Be

H

6.941

9.01218

1.0080

11

12

Na

Mg

19

5

8

IB

1.0080

22.9898

4

VIIIB

Atomic number

5

6

7

8

9

10

Symbol

B

C

N

O

F

Ne

10.81

12.011

14.0067

15.9994

18.9984

20.179

13

14

15

16

17

18

Al

Si

P

S

Cl

Ar

26.9815

28.086

30.9738

32.06

35.453

39.948

31

32

33

34

35

Atomic Mass

24.305 20

22

21

23

24

25

26

27

K

Ca

Sc

Ti

V

Cr

Mn

Fe

Co

39.102

40.08

44.9559

47.90

50.9414

51.996

54.9380

55.847

58.9332

28

Ni 58.71

29

30

36

Cu

Zn

Ga

Ge

As

Se

Br

Kr

63.546

65.37

69.72

72.59

74.9216

78.96

79.904

83.80

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

Rb

Sr

Y

Zr

Nb

Mo

Tc

Ru

Rh

Pd

Ag

Cd

In

Sn

Sb

Te

I

Xe

85.4678

87.62

88.9059

91.22

92.9064

95.94

98.9062

101.07

102.9055

106.4

107.868

112.40

114.82

118.69

121.75

127.60

126.9045

131.30

55

56

57

72

73

74

75

76

77

78

79

80

81

82

83

84

85

86

La

Hf

Ta

W

Re

Os

Ir

Pt

Au

Hg

Tl

Pb

Bi

Po

At

Rn

186.2

190.2

195.09

196.9665

200.59

204.37

207.2

208.9806

(210)

(210)

(222)

Cs

Ba *

132.9055

137.34

138.9055

178.49

180.9479

183.85

87

88

89

104

105

106

Unq

Unp

Unh

(261)

(262)

(263)

Fr (223)

Ra † Ac 226.0254

(227)

58

*

†

59

60

61

62

192.22

63

64

65

66

67

68

69

70

71

Ce

Pr

Nd

Pm

Sm

Eu

Gd

Tb

Dy

Ho

Er

Tm

Yb

Lu

140.12

140.9077

144.24

(145)

150.4

151.96

157.25

158.9254

162.50

164.9303

167.26

168.9342

173.04

174.97 103

90

91

92

93

94

95

96

97

98

99

100

101

102

Th

Pa

U

Np

Pu

Am

Cm

Bk

Cf

Es

Fm

Md

No

Lr

(242)

(243)

(247)

(249)

(251)

(254)

(253)

(256)

(254)

(257)

232.0381 231.0359 238.029 237.0482

Figure 5.4

The periodic table.

into thin sheets (malleable) and extruded into wires (ductile). Chemically, metals tend to lose electrons in reactions, to form cations. Elements bordering the stair-stepped line (B, Si, Ge, As, Sb, Te) are classified as metalloids. Metalloids have properties of both metals and nonmetals. Their unusual electrical properties make them valuable in the semiconductor and computer industry. The rest of the elements, to the right of the metalloids, are called nonmetals. Nonmetals have properties that are often the opposite of metals. Some are gases, are poor conductors of heat and electricity, are neither malleable nor ductile, and tend to gain electrons in their chemical reactions to form anions. Another way to group the elements on the periodic table is in terms of periods and groups (families). Periods are the horizontal rows, which have consecutive atomic numbers. The periods are numbered from 1 to 7. Elements in the same period do not have similar properties in terms of reactions. The vertical rows on the periodic table are called groups or families. They may be labeled in one of two ways. An older and still widely used system is to label each group with a Roman numeral and a letter, A or B. The groups that are labeled with an A are called the main-group elements, while the B groups are called the transition elements. Two other horizontal groups, the inner transition elements, have been pulled out of the main body of the periodic table. The Roman numeral at the top of the main-group families indicates the number of valence (outermost shell) electrons in that element. Valence electrons are normally considered to be only the s and p electrons in the outermost energy level. The transition elements (B groups) are filling d-orbitals, while the inner transition elements are filling f-orbitals.

52 U STEP 4. Review the Knowledge You Need to Score High Four main-group families are given special names, which you should remember: G

KEY IDEA

G G G

IA group (Group 1) IIA group (Group 2) VIIA group (Group 17) VIIIA group (Group 18)

alkali metals alkaline earth metals halogens noble gases

Another way to label the groups is to consecutively number the groups from left to right, 1–18. This method is newer than the other labeling method, and it has not gained wide use. Most teachers and chemists still prefer and use the older method.

Trends in Periodic Properties Trends are useful on the multiple-choice portion of the AP Exam, but simply stating a trend will not be sufficient on the free-response portion of the exam. You must give the reason behind the trend. For example, “higher on the periodic table” is a trend, but not a reason. The overall attraction an electron experiences is due to the effective nuclear charge. This attraction is related to the positive nuclear charge interacting with the negative electrons. Electrons between the nucleus and the electron under consideration interfere with, or shield, that electron from the full nuclear charge. This shielding lessens the nuclear charge. Within a period, the shielding is nearly constant; however, the effective nuclear charge will increase with an increasing number of protons (atomic number). Within the same family or group, as the atomic number increases so does the shielding, resulting in a relatively constant effective nuclear charge. The size of an atom is generally determined by the number of energy levels occupied by electrons. This means that as we move from top to bottom within a group, the size of the atom increases due to the increased number of shells containing electrons. As we move from left to right within a period (within the same valence shell), the atomic size decreases somewhat owing to the increased effective nuclear charge for the electrons. This increased attraction is related to the increasing number of protons within the nucleus. The size of a cation is smaller than the neutral atom, because in many cases an entire energy shell has been removed, while an anion is larger than the corresponding neutral atom since the nuclear attraction is being distributed over additional electrons. As the number of electrons changes so will the electron–electron repulsion. The greater the electron–electron repulsion, the larger the species becomes, and vice versa. The ionization energy (IE) is the energy needed to completely remove an electron from an atom. It may be expressed in terms of 1 atom or a mole of atoms. Energy is required in this process in order to overcome the attraction of the nucleus for the electrons. There are two factors affecting the magnitude of the ionization energy. One is the size of the atom. The closer the electrons are to the nucleus, the more energy is needed to overcome the effective nuclear charge. Therefore, ionization energy tends to decrease from top to bottom within a group, since the valence electrons (the first ones to be lost) are farther away from the nucleus. The other factor is the magnitude of the effective nuclear charge. The greater the effective nuclear charge, the more energy is required to remove the electron. Since the effective nuclear charge increases from left to right within a period, the ionization energies will also increase from left to right. The increased effective nuclear charge results in the atom becoming slightly smaller, which also leads to a greater nuclear attraction for the electrons. The ionization energy for the removal of a second electron is greater in all cases than the first, because the electron is being pulled away from a positively charged ion and the attraction is greater than from a neutral atom.

Basics Í 53

The electron affinity (EA) is the energy change that results from adding an electron to an atom or ion. The trends in electron affinity are not quite as regular as size or ionization energy. In general, electron affinity increases from left to right within a period (owing to the increased effective nuclear charge), and decreases from top to bottom within a group owing to increased atomic or ionic size. Noble gases are an exception—they have no EA. Do not forget that the trends mentioned in this section may help you on the multiple choice portion of the AP exam. However, it is the underlying reasons that you need for the free-response portion.

Oxidation Numbers Oxidation numbers are bookkeeping numbers that allow chemists to do things like balance redox equations. Don’t confuse oxidation numbers with the charge on an ion. Oxidation numbers are assigned to elements in their natural state or in compounds using the following rules: G

KEY IDEA

G

G

G G G

G

G

The oxidation number of an element in its elemental form (i.e., H2, Au, Ag, N2) is zero. The oxidation number of a monoatomic ion is equal to the charge on the ion. The oxi2+ dation number of Mg is +2. Note that the charge is written with number first, then sign; for oxidation numbers it is sign, then number. The sum of all the oxidation numbers of all the elements in a neutral molecule is zero. The sum of all the oxidation numbers in a polyatomic ion is equal to the charge on the ion. The alkali metal ions have an oxidation number of +1 in all their compounds. The alkaline earth metals have an oxidation number of +2 in all their compounds. The oxidation number of hydrogen in compounds is +1, except it is −1 when combined with metals or boron in binary compounds. The oxidation number of halogens in their compounds is −1 except when combined with another halogen above them on the periodic table, or with oxygen. The oxidation number of oxygen is −2 in compounds, except for peroxides, in which it is −1.

Determine the oxidation number of sulfur in sulfuric acid, H2SO4. The sum of all the oxidation numbers must equal zero, since this is a neutral compound. The oxidation numbers of hydrogen (+1) and oxygen (−2) are known, so the oxidation number of sulfur can be determined: 2(+1) + ? + 4(−2) = 0 H 2 SO 4 The oxidation number of sulfur in this compound must be +6.

Nomenclature Overview This overview covers some of the rules for naming simple inorganic compounds. There are additional rules, and some exceptions to these rules. The first part of this overview discusses the rules for deriving a name from a chemical formula. In many cases, the formula may be determined from the name by reversing this process. The second part examines situations in which additional information is needed to generate a formula from the name of a compound. The transition metals present some additional problems; therefore, there is a section covering transition metal nomenclature and coordination compounds.


Binary Compounds Binary compounds are compounds that consist of only two elements. Some binary compounds have special names, and these special names supersede any of the rules given below. H2O is water, NH3 is ammonia, and CH4 is methane. All other binary compounds have a name with a suffix ide. Binary compounds may be subdivided into metal type, nonmetal type, and acid type. (a) Metal type These binary compounds begin with metals. The metal is given first in the formula. In general, metals are the elements on the left-hand side of the periodic table, and the nonmetals are on the right-hand side. Hydrogen, a nonmetal, is an exception to this generalization. First name the metal, then name the nonmetal with the suffix ide. Examples: Formula

Name

Na2O MgCl2

sodium oxide magnesium chloride

The ammonium ion (NH4+) is often treated as a metal, and its compounds are named under this rule. Thus, NH4Cl is named ammonium chloride. (b) Nonmetal type These binary compounds have formulas that begin with a nonmetal. Prefixes are used to indicate the number of each atom present. No prefixes are used for hydrogen. Naming the compounds can best be explained using the following examples: Formula

Name

CO SO3 P4O10

carbon monoxide sulfur trioxide tetraphosphorus decoxide

Carbon monoxide is one of the very few cases where the prefix mono is used. In general, you should not use mono in any other compound. Some of the prefixes used to denote the numbers of atoms in a compound are listed below: Number of atoms

Prefix

1 2 3 4 5 6 7 8 9 10

mono di tri tetra penta hexa hepta octa nona deca

On many occasions the terminal a or o is dropped for oxides, so they read as pentoxide, heptoxide, or monoxide. In normal nomenclature, the nonmetal prefixes are not used if a metal is present. One of the few exceptions to this is MnO2, sometimes called manganese dioxide. (c) Acid type These binary compounds have formulas that begin with hydrogen. If the compound is not in solution, the naming is similar to that of the metal type.

Basics Í 55

If the compound is dissolved in H2O, indicated by (aq), the compound takes on the prefix hydro and the suffix ic. If the compound is not in solution, the state of matter should be shown as follows: HCl( g ), HF( l ) If the formula has no designation of phase or water, either name may be used. Examples for naming these compounds are: Formula

Name

HCl(g) H2S(g) HCl(aq) H2S(aq) HCl H2S

hydrogen chloride hydrogen sulfide hydrochloric acid hydrosulfuric acid hydrogen chloride or hydrochloric acid hydrogen sulfide or hydrosulfuric acid

HCN (hydrocyanic acid) is named using these rules. However, in this case, it does not matter if the phase or water is indicated.

Ternary Compounds Ternary compounds are those containing three or more elements. If the first element in the formula is hydrogen, it is usually classified as an acid. If the formula contains oxygen in addition to the hydrogen, the compound is usually classified as an oxyacid. In general, if the first element in the formula is not hydrogen, the compound is classified as a salt. Ternary acids are usually named with the suffixes ic or ous. The exceptions are the acids derived from ions with an ide suffix (see HCN in the preceding section). These acids undergo many reactions to form salts, compounds of a metal, and the ion of an acid. The 2− − ions from the acids H2SO4 and HNO3 are SO4 , NO3 . If an acid name has the suffix ic, the ion of this acid has a name with the suffix ate. If an acid name has the suffix ous, the ion has a name with the suffix ite. Salts have the same suffixes as the suffixes of the ions. The difference between the acid with a suffix ic and the acid with the suffix ous can many times be determined by visual inspection of the formula. The acid with the suffix ous usually has one fewer oxygen atom than the acid with the suffix ic. Examples: Formula

Name of the acid

Formula

Name of the acid

H2SO4 H2SO3

sulfuric acid sulfurous acid

HNO3 HNO2

nitric acid nitrous acid

When the ternary compound is not an acid, the first element is usually a metal. In these cases, the name of the compound is simply the name of the metal followed by the name of the ion. The ammonium ion is treated as a metal in these cases. The following are examples: Acid formula

Acid name

Ion name

Salt formula

H2SO4 H2SO3 HNO3 HNO2 H3PO4

sulfuric acid sulfurous acid nitric acid nitrous acid phosphoric acid

sulfate ion sulfite ion nitrate ion nitrite ion phosphate ion

Na2SO4 Na2SO3 KNO3 KNO2 (NH4)3PO4

Salt name sodium sulfate sodium sulfite potassium nitrate potassium nitrite ammonium phosphate


Writing Formulas To write the formula from the name of a binary compound containing only nonmetals, simply write the symbols for the separate atoms with the prefixes converted to subscripts. In all compounds, the total charge must be zero. There are NO exceptions. Thus, to determine the formula in those cases where no prefixes are given, it is necessary to have some idea what the individual charges are. The species with the positive charge is listed and named first; this is followed by the species with the negative charge. Subscripts may be needed to make sure the sum of the charges (valances) will equal zero. Examples: 1. Magnesium oxide Mg 2+ O2− = +2 − 2 = 0 This gives MgO. 2. Sodium oxide 1+ 2− Na O = + 1 − 2 = −1 thus a subscript is needed

Na 22(1+ )O2− = 2( +1) − 2 = 0 This gives Na2O. 3. Aluminum oxide 3+ 2− Al O = +3 − 2 = +1 thus a subscript is needed 2(3+)

Al2

O33(−2) = 2(+3) + 3(−2) = 0

This gives Al2O3. If a polyatomic ion must be increased to achieve zero charge, parentheses should be used. An example of this is shown as: NH+4 SO24− = +1 − 2 = −1 2 1+ )

( NH ) ( 4 2

SO42− = 2 ( +1) − 2 = 0

This gives (NH4)2SO4. One way of predicting the values of the subscripts is to crisscross the valences. This is not a rule of nomenclature, but for practice purposes in this exercise it will be referred to as the crisscross rule. It works most of the time and therefore is worth considering. Example: 3+ 2− crisscross the 2 from the oxygen charge to the aluminum and the 3 from the Al O aluminum charge to the oxygen 3+ −2 Al2 O3

If the crisscross rule is applied, you should reduce the formula if possible. For example: TIP

4+ 2 Mn O

crisscrosses to Mn2O4, which reduces to MnO2

If a formula is given, the crisscross rule can be reversed to give the valences: Al2O3 Al23+O32− As a first approximation, the valences of the representative elements can be predicted from their position on the periodic table. Hydrogen and the metals have positive charges

Basics Í 57

beginning with +1 on the left and increasing by one as you proceed to the right on the periodic table (skipping the transition metals). Nonmetals begin with 0 in the rightmost column of the periodic table and decrease by 1 as you move to the left on the periodic table. Metalloids may be treated as metals or nonmetals. Examples are: + 3+ 4+ 3− 2− − Na Al Pb N Se I Na+ Mg2+ Al3+ Si4+ P3– S2– Cl– Au0

Transition Metals Many transition metals and the group of six elements centered around lead on the periodic table commonly have more than one valence. The valence of these metals in a compound must be known before the compound can be named. Modern nomenclature rules indicate the valence of one of these metals with a Roman numeral suffix (Stock notation). Older nomenclature rules used different suffixes to indicate the charge. Examples: 1. FeCl3 Fe3+Cl31− (crisscross rule) The compound is named iron(III) chloride or ferric chloride. 2. FeCl2 If chloride is −1, two chloride ions are −2. Fe has a valence of +2, to give a total charge of zero. The name is iron(II) chloride or ferrous chloride. 3. MnO2 Mn4+ (found previously) The name would be manganese(IV) oxide, although it is often named manganese dioxide. The Roman numeral suffix is part of the name of the metal. Thus iron(III) is one word. Stock notation should be used for all metals that have a variable valence. This includes almost all the transition elements and the elements immediately around lead on the periodic table. Stock notation is often omitted for Zn, Cd, and Ag, as they do not have variable valence. The valences of some common metals and acids are listed in Appendix C.

Coordination Compounds Coordination compounds contain a complex. In general, a complex may be recognized because it is enclosed in square brackets [ ]. The square brackets are omitted when the actual structure of the complex is uncertain. A complex is composed of a central atom, normally a metal, surrounded by atoms or groups of atoms called ligands. One way of forming a complex is illustrated below: 2+ 2+ Ni + 6 H2O → [Ni(H2O)6]

In this reaction the metal behaves as a Lewis acid and accepts a pair of electrons from the Lewis base (ligand). In this case the ligand is water, with the oxygen atom donating one of its lone pairs to the nickel. The oxygen atom is called the donor atom. In this complex, there are six donor atoms. A complex may be ionic or neutral. An ionic complex is called a complex ion. A neutral complex is a type of coordination compound. The only difference in naming coordination compounds or complex ions is that anionic complex ions have an ate suffix. A coordination compound may contain more than one complex ion or material that is not part of the complex, but it must have an overall neutral charge. Examples of coordination compounds are: [Pt(NH3)2Cl2], K2[Mn(C2O4)3], and [Ni(H2O)6]SO4.

58 U STEP 4. Review the Knowledge You Need to Score High When writing formulas the metal (central atom) is always listed first within the brackets. However, when writing names the metal name is always given last. Any material not listed within the brackets is named separately. Examples:

[Ru(NH3)5(N2)]Cl2 2+

[Ru(NH3)5(N2)]

coordination compound complex ion (cationic)

[PtNH3Cl2(C5H5N)] coordination compound −

[IF6]

complex ion (anionic) (the name must end in -ate)

K[IF6]

coordination compound (same -ate ending)

If everything in the formula is enclosed within one set of brackets, the entire name will be one word. If there is material outside the brackets, this outside material is named separately. Just as with simpler compounds, cations are always named before anions. Thus, a cationic complex would be the first word in the name, and an anionic complex would be the last word in a name (with an ate ending). Examples:

[Ni(H2O)4Cl2]

tetraaquadichloronickel(II)

[Co(NH3)6]Cl3

hexaamminecobalt(III) chloride

K2[PtCl4]

potassium tetrachloroplatinate(II)

When naming a complex, or when writing the formula for a complex, the ligands are listed alphabetically. Again, do not forget that metals are first in the formula and last in the name. The names of anionic ligands always end in an o. Neutral ligands are basically unchanged. Two common exceptions in the case of neutral ligands are NH3 = ammine (note the double m), and H2O = aqua. Other common ligands and their names are listed in Appendix C. Multiple identical ligands have prefixes added to designate the number of such ligands: 2 3 4

ditritetra-

5 6 7

pentahexahepta-

8 9 10

octanonadeca-

Examples:

[Co(NH3)6]Cl3

hexamminecobalt(III) chloride

[Cr(NO)4]

tetranitrosylchromium(0)

If the ligand name contains a prefix or begins with a vowel (except ammine and aqua), alternate prefixes should be used: 2 3 4

bistristetrakis-

5 6 7

pentakishexakisheptakis-

8 9 10

octakisnonakisdecakis-

When using the alternate prefixes, it is common practice to enclose the name of the ligand within parentheses. Either type of prefix is added after the ligands have been alphabetized.

Basics Í 59 Examples:

[Cr(en)3]Cl3

Tris(ethylenediamine)chromium(III) chloride

K2[Ge(C2O4)3]

Potassium tris(oxalato)germanate

Anionic complexes always have names ending in ate. This will require a change in the name of the metal. Thus, aluminum would become aluminate, and zinc would become zincate. The only exceptions to this are some of the metals whose symbols are based on Latin or Greek names. These exceptions are: Metal (Greek or Latin name) copper (cuprum) silver (argentum) gold (aurum) iron (ferrum) tin (stannum) lead (plumbum)

Symbol Cu Ag Au Fe Sn Pb

Anionic name cuprate argentate aurate ferrate stannate plumbate

Examples:

K[Au(CN)4]

potassium tetracyanoaurate(III)

(NH4)2[PbCl6]

ammonium hexachloroplumbate(IV)

If the metal ion may exist in more than one oxidation state, this oxidation state should be listed, in Roman numerals, immediately after the name of the metal ion. The Roman numeral is enclosed in parentheses and is considered part of the same word, and not a separate grouping. If the metal occurs in only one oxidation state, no such indicator is used. This notation is the Stock system discussed earlier.

Experimental STRATEGY

Experiments involving the basic material covered in this chapter have been placed in the in-depth chapters throughout the remainder of this book.

Common Mistakes to Avoid TIP

Between the two of us, we have almost 60 years of teaching experience. We’ve seen a lot of student mistakes. We will try to to steer you clear of the most common ones. 1. Always show your units in mathematical problems. 2. In the conversion from °F to °C, be sure to subtract 32 from the Fahrenheit temperature first, then multiply by 5⁄9. 3. In the conversion from °C to °F, be sure to multiply the Celsius temperature by 9⁄5, then add 32. 4. There is no degree sign used for kelvin. 5. Only consider measured values for significant figures. 6. When considering whether or not zeroes to the right of the last non-zero digit are significant, pay attention to whether or not there is a decimal point. 7. Round only off your final answer, not intermediate calculations. 8. In working problems, be sure that your units cancel. 9. If you are solving for cm, for example, be sure you end up with cm and not 1/cm.

60 U STEP 4. Review the Knowledge You Need to Score High 10. Make sure your answer is a reasonable one. 11. Don’t confuse the mass number (A) with the atomic number (Z). 12. When determining valence electrons, only the s and p electrons are considered. 13. Don’t put more than 2 electrons in any individual orbital. 14. Always fill lowest energy levels first. 15. Half fill orbitals of equal energy before pairing up the electrons. 16. In writing the electronic configuration of an atom, make sure you use the correct filling order. 17. Don’t confuse the periods with the groups on the periodic table. 18. Don’t confuse ionization energy with electron affinity. 19. Don’t confuse oxidation numbers with ionic charge. 20. In naming compounds, don’t confuse metal and nonmetal type binary compounds. Prefixes are used only with nonmetal types. 21. Be careful when using the crisscross rule to reduce the subscripts to their lowest whole-number ratio. 22. Be sure to report the proper number of significant figures. 23. Simply knowing a periodic trend will allow you to pick the correct multiple-choice answer, but be prepared to explain the trend in free-response questions.

U Review Questions This is where you get a chance to practice your multiple-choice test-taking skills. Take it as a test, within the specified time frame. We have attempted to word the questions as closely as possible to the way the questions will be worded on the AP Exam. Answer the following questions. You have 25 minutes. You may not use a calculator. You may use the periodic table in the back of the book. 1. In most of its compounds, this element exists as a monatomic cation. (A) (B) (C) (D) (E)

O Cl Na N I

2. This element may form a compound with the formula CaXO4. (A) (B) (C) (D) (E)

Se Cl P Na He

3. Which of the following elements may occur in the greatest number of different oxidation states? (A) (B) (C) (D) (E)

C F O Ca Na

4. Choose the group that does not contain isotopes of the same element. Number of Number of protons neutrons (A) Atom I 18 18 Atom II 18 19 (B) Atom I 25 30 Atom II 25 31 (C) Atom I 37 42 Atom II 37 41 (D) Atom I 82 126 Atom II 82 128 (E) Atom I 18 18 Atom II 17 18

Basics Í 61

5. Which of the following groups has the species correctly listed in order of increasing radius? (A) (B) (C) (D) (E)

2+ 2+ 2+ Mg , Ca , Ba K+, Na+, Li+ Br−, Cl−, F− Na, Mg, Al 2+ 3+ Fe, Fe , Fe

(A) (B) (C) (D) (E)

6. Which of the following elements has the lowest electronegativity? (A) (B) (C) (D) (E)

−

Third 6910

Fourth 9540

Fifth 13400

Based on the above information, the most likely identity of X is (A) (B) (C) (D) (E)

Mg Cl Al Na Si

(A) (B) (C) (D) (E)

P3[Fe(C2O4)3] K3[Fe(C2O4)3] KFe3(C2O4)3 K3FeO3 K3[Fe3(C2O4)3]

14. Which of the following substances will produce a colorless aqueous solution?

9. The following ionization energies are reported for element X. (All the values are in kJ/mol.) Second 4560

11. This element is a reactive gas.

13. Which of the following represents the correct formula for potassium trisoxalatoferrate(III)?

ionization energy sublimation energy atomization energy electron affinity lattice energy

First 500

chlorine gold sodium radon radium

12. This element is an unreactive metal.

F Al3+ K+ O2− I−

8. What is the name of the energy change when a gaseous atom, in the ground state, adds an electron? (A) (B) (C) (D) (E)

first increases and then decreases increases first decreases and then increases does not change decreases

Choose one of the following elements for questions 11 and 12. (A) (B) (C) (D) (E)

C K Al I F

7. Choose the ion with the largest ionic radius. (A) (B) (C) (D) (E)

10. In general, as the atomic numbers increase within a period, the atomic radius

(A) (B) (C) (D) (E)

Zn(NO3)2 CuSO4 K2Cr2O7 Co(NO3)2 NiSO4

15. This element is a liquid at room temperature. (A) (B) (C) (D) (E)

Hg Th Na Cl Co

Choose from the following elements for questions 16–18. (A) (B) (C) (D) (E)

K Ga Fe Mg Al

62 U STEP 4. Review the Knowledge You Need to Score High 16. This element is present in chlorophyll. 17. This element forms a protective oxide coating. 18. This element is used to improve the conductivity of germanium. 19. Which of the following aqueous solutions is blue? (A) (B) (C) (D) (E)

CuSO4 Cr2(SO4)3 NiSO4 ZnSO4 CoSO4

20. In order to separate two substances by fractional crystallization, the two substances must differ in which of the following? (A) (B) (C) (D) (E)

solubility specific gravity vapor pressure viscosity freezing point

21. In a flame test, copper compounds impart which of the following colors to a flame? (A) (B) (C) (D) (E)

red orange blue to green violet yellow

22. What should you do if you spill sulfuric acid on the countertop? (A) (B) (C) (D)

Neutralize the acid with vinegar. Sprinkle solid NaOH on the spill. Neutralize the acid with NaHCO3 solution. Neutralize the acid with an Epsom salt (MgSO4) solution. (E) Use paper towels to soak up the acid.

23. Which of the following can be achieved by using a visible-light spectrophotometer? I. Detecting the presence of isolated double bonds. II. Finding the concentration of a KMnO4 solution. + III. Running a flame test to determine if Na or + K is in a solution. (A ) (B ) (C) (D) (E )

III only II only I only II and III I and II

24. You are given an aqueous solution of NaCl. The simplest method for the separation of NaCl from the solution is (A) (B) (C) (D) (E)

evaporation of the solution to dryness centrifuging the solution osmosis of the solution electrolysis of the solution filtration of the solution

25. The determination that atoms have small, dense nuclei is attributed to (A) (B) (C) (D) (E)

Rutherford Becquerel Einstein Dalton Bohr

Basics Í 63

U Answers and Explanations Here are the answers and explanations to the review questions. Go through each one. Don’t memorize; strive to understand. 1. C—All the other elements are nonmetals. Nonmetals usually form monatomic anions. 2. A—The element can not be a metal (Na) or a noble gas (He). A nonmetal that can have a +6 oxidation state is needed. P has a maximum of +5. Cl may be +5 or +7. Se, in column 6A, can easily be +6. 3. A—Based on their positions on the periodic table: C F O Ca Na

+4 to –4 –1 and 0 (element) –2 to 0 +2 and 0 +1 and 0

11. A—The only other gas is radon, and it is inert. 12. B—Sodium and radium are metals on the left side of the periodic table. Metals on the left side of the periodic table are very reactive. 3+ 13. B—Ferrate(III) means Fe , while trisoxalato means (C2O4)36−; three potassiums are needed to balance the charge.

14. A—B is blue; C is orange; D is pink to red; and E is green. 15. A—Chlorine is a gas; all the others are solids. 16. D—Magnesium is present in chlorophyll. 17. E—Aluminum forms a protective oxide coating.

4. E—Isotopes MUST have the same number of protons. Different isotopes have different numbers of neutrons.

18. B—Gallium is one of the elements that will improve the conductivity of germanium.

5. A—All the others are in decreasing order.

19. A—B is purple; C is green; D is colorless; and E is pink to red.

6. B—In general, the element furthest from F on the periodic table will have the lowest electronegativity. There are exceptions.

20. A—Fractional crystallization works because the less soluble material separates first.

7. E—The very large iodine atom gains an electron to make it even larger. 8. D—The definition of electron affinity is: the energy change when a ground-state gaseous atom adds an electron. 9. D—The more electrons removed, the higher the values should be. The large increase between the first and second ionization energies indicates a change in electron shell. The element, X, has only 1 valence electron. This is true for Na. For the other elements the numbers of valence electrons are: Mg—2; Cl—7; Al—3; and Si—4. 10. E—The increase in the number of protons in the nucleus has a greater attraction for the electrons being added in the same energy level. Thus, the electrons are pulled closer to the nucleus and the size slightly decreases.

21. C—A could be Li or Sr; B is Ca; D is K; and E is Na. 22. C—A weak base with water to disperse the heat is the best choice. 23. B—A solution containing a colored substance is needed. 24. A—Separation of materials in solution is normally not simple. Reverse osmosis would also work. 25. A—Rutherford proved the existence of the nucleus.


U Free-Response Questions Both authors have been AP free-response graders for years. Here are some free-response questions for practice. You have 10 minutes. You may not use a calculator. You may use the tables at the back of the book. Use the periodic table and other information concerning bonding and electronic structure to explain the following observations. 3+ a. The radii of the iron cations are less than that of an iron atom, and Fe is smaller 2+ than Fe . b. When moving across the periodic table from Li to Be to B, the first ionization energy increases from Li to Be, then drops for B. The first ionization energy of B is greater than that of Li. c. The electron affinity of F is higher than the electron affinity of O. d. The following observations have been made about the lattice energy and ionic radii of the compounds listed below. Compare NaF to CaO, and then compare CaO to BaO. All of the solids adopt the same crystal structure.

Compound NaF CaO BaO

Ionic radius of cation (pm) 116 114 149

Ionic radius of anion (pm) 119 126 126

Lattice energy (kJ/mole) 911 3566 3202

U Answers and Explanations Notice that all the answers are very short. Do not try to fill all the space provided on the exam. You score points by saying specific things, not by the bulk of material. The graders look for certain keywords or phrases. The answers should not contain statements that contradict each other. 2+ 3+ a. The observed trend of radii is: Fe > Fe > Fe . There is an increase in the effective nuclear charge in this series. As electrons are removed, the repulsion between the electrons decreases. The larger the effective nuclear charge, the more the electrons are pulled towards the nucleus and the smaller the atom or ion becomes. Give yourself 1 point for “effective nuclear charge,” and 1 point for explaining the effective nuclear charge discussion.

b. When moving across a period on the periodic table, the value of the effective nuclear charge increases with atomic number. This causes a general increase from Li to Be to B. This effective nuclear charge argument is worth 1 point. The even higher value of Be (greater than B) is due to the increased stability of the electron configuration of Be. Beryllium has a filled s-subshell. Filled subshells have an increased stability, and additional energy is required to pull an electron away. Give yourself 1 point for the filled subshell discussion. c. The effective nuclear charge in F is greater than the effective nuclear charge in O. This causes a greater attraction of the electrons. You get 1 point for this answer. d. Because all the solids adopt the same structure, the structure is irrelevant. The sizes of the anions are similar; thus, anion size arguments are not important. Two factors, other than structure, are important here. The two compounds with the highest lattice energies contain divalent ions (+2 or −2) while NaF contains

Basics Í 65

univalent ions (+1 or −1). The higher the charge is, the greater the attraction between the ions is. The lattice energy increases as the attraction increases. You get 1 point for correctly discussing the charges. The difference between the CaO and BaO values is because the larger the ion is, the lower the attraction is (greater separation). The lower attraction leads to a lower lattice energy. This size argument will get you 1 point. Total your points. The maximum is 7.

U Rapid Review Here is a brief review of the most important points in the chapter. If something sounds unfamiliar, study it in the chapter and your textbook. G

G

G

G

G

G

G

G

G

G

G

G

G

G

G

G

G

Know the metric measurement system and some metric/English conversions. Know how to convert from any one of the Fahrenheit/Celsius/Kelvin temperature scales to the other two. The density of a substance is mass per unit volume. Know how to determine the number of significant figures in a number, the rules for how many significant figures are to be shown in the final answer, and the round-off rules. Know how to set up problems using the factor label method. Know the differences between a solid, a liquid, and a gas at both the macroscopic and microscopic levels. Know what part Dalton, Thompson, Millikan, and Rutherford had in the development of the atomic model. Know the three basic subatomic particles—proton, neutron, and electron—their symbols, mass in amu, and their location. Isotopes are atoms of the same element that have differing numbers of neutrons. Electrons are located in major energy levels called shells. Shells are divided into subshells, and there are orbitals for each subshell. Know the electron capacity of each orbital (always 2). Be able to write both the energy-level diagram and the electronic configuration of an atom or ion by applying both the Aufbau build-up principle and Hund’s rule. Know how the modern periodic table was developed, including the differences between Mendeleev’s table and the current table. Periods are the horizontal rows on the periodic table; the elements have properties unlike the other members of the period. Groups or families are the vertical rows on the periodic table; the elements have similar properties. Know the properties of metals, nonmetals, and metalloids and which elements on the periodic table belong to each group. Valence electrons are outer-shell electrons.

66 U STEP 4. Review the Knowledge You Need to Score High G

G

G

G

G

The IA family is known as the alkali metals; the IIAs are the alkaline earth metals; the VIIAs are the halogens; and the VIIIAs are the noble gases. Know why atoms get larger as we go from top to bottom in a group and slightly smaller as we move from left to right on the periodic table. Ionization energy is the energy it takes to remove an electron from a gaseous atom or ion. It decreases from top to bottom and increases from left to right on the periodic table. Much the same trend is noted for electron affinity, the energy change that takes place when an electron is added to a gaseous atom or ion. The trends depend on the size of the atom or ion and its effective nuclear charge. Oxidation numbers are bookkeeping numbers. Know the rules for assigning oxidation numbers. Be able to name binary metal type and nonmetal type compounds, as well as ternary compounds, oxyacids, simple coordination compounds, etc.

CHAPTER

6

Reactions and Periodicity TIP

Reactions will always occur in the free-response section of the AP Exam.

AP Exam Format Beginning with the 2007 AP exam, the treatment of chemical reactions was changed from previous years. In the past, the free-response questions concerning chemical reactions have simply involved the formulas of the reactants and products chosen from a series of reactions. You were not expected to write balanced chemical equations. However, under the current AP Chemistry exam format you no longer will be able to choose from a list of reactions. You will be expected to write a balanced chemical equation for every reaction given and answer one or more questions about each reaction. If the reaction occurs in aqueous solution, you will have to write the net ionic equation for the process. For the reactions question of the AP exam, you will be expected not only to balance the equation, but to have an understanding of why the reaction occurs. The reactions and concepts described may also appear in other parts of the AP exam, such as the multiple-choice sections. Again, you will need to have an understanding of why a particular reaction occurs. As you study this chapter, pay particular attention to the explanations that accompany the reactions and equations. You will be expected to demonstrate your understanding on the AP exam. IN THIS CHAPTER Summary: Chemistry is the world of chemical reactions. Chemical reactions power our society, our environment, and our bodies. Some chemical species called reactants get converted into different substances called products. During this process there are energy changes that take place. It takes energy to break old bonds. Energy is released when new bonds are formed. Does it take more energy to break the bonds than is released in the formation of the new bonds? If so, energy will have to be constantly supplied to convert the reactants into products. This type of reaction is said to be endothermic, Í 67

68 U STEP 4. Review the Knowledge You Need to Score High absorbing energy. If more energy is released than is needed to break the old bonds, then the reaction is said to be exothermic, releasing energy. The chemical reactions that provide the energy for our world are exothermic reactions. In Chapter 9 Thermodynamics, you can read in more depth about the energy changes that occur during reactions. Reactions occur because of collisions. One chemical species collides with another at the right place, transfers enough energy, and a chemical reaction occurs. Such reactions can be very fast or very slow. In the chapter on Kinetics, you can study how reactions occur and the factors that affect the speed of reactions. But in this chapter we will review the balancing of chemical equations, discuss the general types of chemical reactions, and describe why these reactions occur. Keywords and Equations KEY IDEA

There are no keywords or equations listed on the AP Exam that are specific to this chapter.

General Aspects of Chemical Reactions and Equations Balancing Chemical Equations The authors hope that, because you are preparing to take the AP exam, you have already been exposed to the balancing of chemical equations. We will quickly review this topic and point out some specific aspects of balancing equations as the different types of chemical reactions are discussed. A balanced chemical equation provides many types of information. It shows which chemical species are the reactants and which species are the products. It may also indicate in which state of matter the reactants and products exist. Special conditions of temperature, catalysts, etc., may be placed over or under the reaction arrow. And, very importantly, the coefficients (the integers in front of the chemical species) indicate the number of each reactant that is used and the number of each product that is formed. These coefficients may stand for individual atoms/molecules or they may represent large numbers of them called moles (see the Stoichiometry chapter for a discussion of moles). The basic idea behind the balancing of equations is the Law of Conservation of Matter, which says that in ordinary chemical reactions matter is neither created nor destroyed. The number of each type of reactant atom has to equal the number of each type of product atom. This requires adjusting the reactant and product coefficients—balancing the equation. When finished, the coefficients should be in the lowest possible whole-number ratio. Most equations are balanced by inspection. This means basically a trial-and-error, methodical approach to adjusting the coefficients. One procedure that works well is to balance the homonuclear (same nucleus) molecule last. Chemical species that fall into this category include the diatomic elements, which you should know: H2, O2, N2, F2, Cl2, Br2, and I2. This is especially useful when balancing combustion reactions. If a problem states that oxygen gas was used, then knowing that oxygen exists as the diatomic element is absolutely necessary in balancing the equation correctly.

Periodic Relationships The periodic table can give us many clues as to the type of reaction that is taking place. One general rule, covered in more detail in the Bonding chapter, is that nonmetals react with other nonmetals to form covalent compounds, and that metals react with nonmetals to

Reactions and Periodicity Í 69

form ionic compounds. If the reaction that is producing the ionic compound is occurring in solution, you will be expected to write the net ionic equation for the reaction. Also, because of the wonderful arrangement of the periodic table, the members of a family or group (a vertical grouping) all react essentially in the same fashion. Many times, in reactions involving the loss of electrons (oxidation), as we proceed from top to bottom in a family the reaction rate (speed) increases. Conversely, in reactions involving the gain of electrons (reduction) the reaction rate increases as we move from the bottom of a family to the top. Recall also that the noble gases (VIIIA) undergo very few reactions. Other specific periodic aspects will be discussed in the various reaction sections.

General Properties of Aqueous Solutions Many of the reactions that you will study occur in aqueous solution. Water is called the universal solvent, because it dissolves so many substances. It readily dissolves ionic compounds as well as polar covalent compounds, because of its polar nature. Ionic compounds that dissolve in water (dissociate) form electrolyte solutions, which conduct electrical current owing to the presence of ions. The ions can attract the polar water molecules and form a bound layer of water molecules around themselves. This process is called solvation. Refer to the Solutions and Periodicity chapter for an in-depth discussion of solvation. Even though many ionic compounds dissolve in water, many others do not. If the attraction of the oppositely charged ions in the solid for each other is greater than the attraction of the polar water molecules for the ions, then the salt will not dissolve to an appreciable amount. If solutions containing ions such as these are mixed, precipitation will occur, because the strong attraction of the ions for each other overcomes the weaker attraction for the water molecules. As mentioned before, certain covalent compounds, like alcohols, readily dissolve in water because they are polar. Since water is polar, and these covalent compounds are also polar, water will act as a solvent for them (general rule of solubility: “Like dissolves like”). Compounds like alcohols are nonelectrolytes—substances that do not conduct an electrical current when dissolved in water. However, certain covalent compounds, like acids, will ionize in water, that is, form ions: HCl(aq ) → H + (aq ) + Cl − (aq ) There are several ways of representing reactions that occur in water. Suppose, for example, that we were writing the equation to describe the mixing of a lead(II) nitrate solution with a sodium sulfate solution and showing the resulting formation of solid lead(II) sulfate. One type of equation that can be written is the molecular equation, in which both the reactants and products are shown in the undissociated form: Pb(NO3 )2 (aq ) + Na 2 SO4 (aq ) → PbSO4 ( s) + 2NaNO3 (aq ) Molecular equations are quite useful when doing reaction stoichiometry problems (see Chapter 7). Showing the soluble reactants and products in the form of ions yields the ionic equation (sometimes called the total ionic equation): Pb2+ ( aq ) + 2NO3− ( aq ) + 2Na + (aq ) + SO24− (aq ) → PbSO 4 (s) + 2Na + ( aq ) + 2NO3− (aq )


STRATEGY

Writing the equation in the ionic form shows clearly which species are really reacting + and which are not. In the example above, Na and NO3− appear on both sides of the equation. They do not react, but are simply there in order to maintain electrical neutrality of the solution. Ions like this, which are not actually involved in the chemical reaction taking place, are called spectator ions. The net ionic equation is written by dropping out the spectator ions and showing only those chemical species that are involved in the chemical reaction: Pb2+ ( aq ) + SO24− ( aq ) → PbSO 4 ( s) This net ionic equation focuses only on the substances that are actually involved in the 2+ reaction. It indicates that an aqueous solution containing Pb (any solution, not just Pb(NO3)2(aq)) will react with any solution containing the sulfate ion to form insoluble lead(II) sulfate. If this equation form is used, the spectator ions involved will not be known, but in most cases this is not a particular problem since the focus is really the general reaction, and not the specific one. You will be expected to write the balanced net ionic equation for many of the reactions on the test.

Precipitation Reactions Precipitation reactions involve the formation of an insoluble compound, a precipitate, from the mixing of two soluble compounds. Precipitation reactions normally occur in aqueous solution. The example above that was used to illustrate molecular equations, ionic equations, etc., was a precipitation reaction. A solid, lead(II) sulfate, was formed from the mixing of the two aqueous solutions. In order to predict whether or not precipitation will occur if two solutions are mixed, you must: STRATEGY

1. Learn to write the correct chemical formulas from the names; on the AP exam names are frequently given instead of formulas in the reaction section. 2. Be able to write the reactants and products in their ionic form, as in the ionic equation example above. Be sure, however, that you do not try to break apart molecular compounds such as most organic compounds, or insoluble species. 3. Know and be able to apply the following solubility rules by combining the cation of one reactant with the anion of the other in the correct formula ratio, and determining the solubility of the proposed product. Then do the same thing for the other anion/cation combination. 4. On the AP exam, you will be expected to explain why a substance is soluble/insoluble. Simply quoting the solubility rule is not sufficient. Learn the following solubility rules: Salts containing the following ions are normally soluble:

STRATEGY G G

G

G

All salts of Group IA (Li+, Na+, etc.) and the ammonium ion (NH4+) are soluble. All salts containing nitrate (NO3−), acetate (CH3COO− ), and perchlorates (ClO4− ) are soluble. All chlorides (Cl− ), bromides (Br− ), and iodides (I− ) are soluble, except those of Cu+, Ag+, 2+ 2+ Pb , and Hg2 . All salts containing sulfate (SO42−) are soluble, except those of Pb2+, Ca2+, Sr2+, and Ba2+.


Salts containing the following ions are normally insoluble: G

G G G

Most carbonates (CO32− ) and phosphates (PO43− ) are insoluble, except those of Group IA and the ammonium ion. Most sulfides (S2−) are insoluble, except those of Group IA and IIA and the ammonium ion. Most hydroxides (OH−) are insoluble, except those of Group IA, calcium, and barium. Most oxides (O2−) are insoluble, except for those of Group IA, and Group IIA which react with water to form the corresponding soluble hydroxides.

Let’s see how one might apply these rules. Suppose a solution of lead(II) nitrate is mixed with a solution of sodium iodide. Predict what will happen. Write the formulas: Pb(NO3 )2 (aq ) + NaI(aq ) → Convert to the ionic form: Pb2+ ( aq ) + 2NO−3 (aq ) + Na + (aq ) + I− (aq ) → Predict the possible products by combining the cation of one reactant with the anion of the other and vice versa: PbI2 + NaNO3 Apply the solubility rules to the two possible products: PbI2(s)

Insoluble, therefore a precipitate will form.

NaNO3(aq)

Soluble, no precipitate will form.

Complete the chemical equation and balance it: Pb(NO3 )2 (aq ) + 2NaI(aq ) → PbI2 ( s) + 2NaNO3 (aq ) Pb2+ (aq ) + 2I− (aq ) → PbI2 ( s) If both possible products are soluble, then the reaction would be listed as NR (No Reaction). In the reaction question part of the AP exam, there will be a possible reaction for every part of the question. If at least one insoluble product is formed, the reaction is sometimes classified as a double displacement (replacement) or metathesis reaction.

Oxidation–Reduction Reactions

TIP

Oxidation–reduction reactions, commonly called redox reactions, are an extremely important category of reaction. Redox reactions include combustion, corrosion, respiration, photosynthesis, and the reactions involved in electrochemical cells (batteries). The driving force involved in redox reactions is the exchange of electrons from a more active species to a less active one. You can predict the relative activities from a table of activities or a halfreaction table. Chapter 16 goes into depth about electrochemistry and redox reactions. The AP free-response booklet includes a table of half-reactions, which you may use for help during this part of the exam. A similar table can be found in the back of this book. Alternatively, you may wish to memorize the common oxidizing and reducing agents. Redox is a term that stands for reduction and oxidation. Reduction is the gain of electrons and oxidation is the loss of electrons. For example, suppose a piece of zinc metal is

72 U STEP 4. Review the Knowledge You Need to Score High placed in a solution containing the blue Cu2+ cation. Very quickly a reddish solid forms on the surface of the zinc metal. That substance is copper metal. As the copper metal is deposited, the blue color of the solution begins to fade. At the molecular level, the more 2+ 2+ active zinc metal is losing electrons to form the Zn cation, and the Cu ion is gaining electrons to form the less active copper metal. These two processes can be shown as: Zn( s) → Zn 2+ ( aq ) + 2e − Cu 2+ ( aq ) + 2e − → Cu( s)

(oxidation ) ( reduction )

The electrons that are being lost by the zinc metal are the same electrons that are being gained by the copper(II) ion. The zinc metal is being oxidized and the copper(II) ion is being reduced. Further discussions on why reactions such as these occur can be found in the section on single-displacement reactions later in this chapter. Something must cause the oxidation (taking the electrons) and that substance is called the oxidizing agent (the reactant being reduced). In the example above, the oxidizing agent 2+ is the Cu ion. The reactant undergoing oxidation is called the reducing agent because it is furnishing the electrons that are being used in the reduction half-reaction. Zinc metal is the reducing agent above. The two half-reactions, oxidation and reduction, can be added together to give you the overall redox reaction. When doing this, the electrons must cancel—that is, there must be the same number of electrons lost as electrons gained: Zn( s) + Cu 2+ (aq ) + 2e − → Zn 2+ (aq ) + 2e − + Cu( s) or

Zn( s) + Cu 2+ (aq ) → Zn 2+ (aq ) + Cu( s)

On the AP exam, you might be asked to identify what is being oxidized and reduced or to identify the oxidizing and reducing agents. (Be careful.) In these redox reactions there is a simultaneous loss and gain of electrons. In the oxidation reaction (commonly called a half-reaction) electrons are being lost, but in the reduction half-reaction those very same electrons are being gained. So, in redox reactions electrons are being exchanged as reactants are being converted into products. This electron exchange may be direct, as when copper metal plates out on a piece of zinc, or it may be indirect, as in an electrochemical cell (battery). Another way to determine what is being oxidized and what is being reduced is by looking at the change in oxidation numbers of the reactant species. (See the Basics chapter for a discussion of oxidation numbers and how to calculate them.) On the AP exam you may be asked to assign oxidation numbers and/or identify changes in terms of oxidation numbers. Oxidation is indicated by an increase in oxidation number. In the example above, the Zn metal went from an oxidation state of zero to +2. Reduction is indicated by a decrease 2+ in oxidation number. Cu went from an oxidation state of +2 to zero. In order to figure out whether a particular reaction is a redox reaction, write the net ionic equation. Then determine the oxidation numbers of each element in the reaction. If one or more elements have changed oxidation number, it is a redox reaction. There are several types of redox reaction that are given specific names. In the next few pages we will examine some of these types of redox reaction.

Combination Reactions Combination reactions are reactions in which two or more reactants (elements or compounds) combine to form one product. Although these reactions may be of a number of different types, some types are definitely redox reactions. These include reactions of metals


with nonmetals to form ionic compounds, and the reaction of nonmetals with other nonmetals to form covalent compounds. 2K ( s) + Cl 2 ( g ) → 2KCl(s) 2H 2 ( g ) + O2 ( g ) → 2H 2O(l ) In the first reaction, we have the combination of an active metal with an active nonmetal to form a stable ionic compound. The very active oxygen reacts with hydrogen to form the stable compound water. The hydrogen and potassium are undergoing oxidation, while the oxygen and chlorine are undergoing reduction.

Decomposition Reactions Decomposition reactions are reactions in which a compound breaks down into two or more simpler substances. Although not all decomposition reactions are redox reactions, many are. For example, the thermal decomposition reactions, such as the common laboratory experiment of generating oxygen by heating potassium chlorate, are decomposition reactions: 2 KClO3 ( s) ⎯Δ⎯ → 2 KCl( s) + 3 O2 ( g ) In this reaction the chlorine is going from the less stable +5 oxidation state to the more stable −1 oxidation state. While this is occurring, oxygen is being oxidized from −2 to 0. Another example is electrolysis, in which an electrical current is used to decompose a compound into its elements: 2 H 2O( l ) ⎯electricity ⎯⎯→ 2 H 2 ( g ) + O2 ( g ) The spontaneous reaction would be the opposite one; therefore, we must supply energy (in the form of electricity) in order to force the nonspontaneous reaction to occur.

Single Displacement Reactions Single displacement (replacement) reactions are reactions in which atoms of an element replace the atoms of another element in a compound. All of these single replacement reactions are redox reactions, since the element (in a zero oxidation state) becomes an ion. Most single displacement reactions can be categorized into one of three types of reaction: G

STRATEGY

G G

TIP

TIP

A metal displacing a metal ion from solution A metal displacing hydrogen gas (H2) from an acid or from water One halogen replacing another halogen in a compound

Remember: It is an element displacing another atom from a compound. The displaced atom appears as an element on the product side of the equation. Reactions will always occur in the free-response section of the AP Chemistry exam. This may not be true in the multiple-choice part. For the first two types, a table of metals relating their ease of oxidation to each other is useful in being able to predict what displaces what. Table 6.1 shows the activity series for metals, which lists the metal and its oxidation in order of decreasing ease of oxidation. An alternative to the activity series is a table of half-cell potentials, as discussed in Chapter 16. In general, the more active the metal, the lower its potential.

74 U STEP 4. Review the Knowledge You Need to Score High Table 6.1 Li(s) K(s) Ba(s) Sr(s) Ca(s) Na(s) Mg(s) Al(s) Mn(s) Zn(s) Cr(s) Fe(s) Cd(s) Co(s) V(s) Ni(s) Sn(s) Pb(s) H2(g) Cu(s) Ag(s) Hg(l) Pd(s) Pt(s) Au(s)

Activity Series of Metals in Aqueous Solution → → → → → → → → → → → → → → → → → → → → → → → → →

Li+(aq) + K (aq) Ba2+(aq) Sr2+(aq) Ca2+(aq) Na+(aq) Mg2+(aq) Al3+(aq) Mn2+(aq) Zn2+(aq) Cr2+(aq) Fe2+(aq) Cd2+(aq) Co2+(aq) V3+(aq) Ni2+(aq) Sn2+(aq) Pb2+(aq) 2 H+(aq) Cu2+(aq) Ag+(aq) Hg2+(aq) Pd2+(aq) Pt2+(aq) Au3+(aq)

+ + + + + + + + + + + + + + + + + + + + + + + + +

ee2 e2 e2 ee2 e3 e2 e2 e2 e2 e2 e2 e3 e2 e2 e2 e2 e2 ee2 e2 e2 e3 e-

Most easily oxidized

Least easily oxidized

Elements on this activity series can displace ions of metals lower than themselves on the list. If, for example, one placed a piece of tin metal into a solution containing 2+ Cu(NO3)2(aq), the Sn would replace the Cu cation: Sn( s) + Cu( NO3 )2 (aq ) → Sn( NO3 )2 (aq ) + Cu( s) Sn(s) + Cu 2+ (aq ) → Sn 2+ (aq ) + Cu( s) The second equation is the net ionic form that is often required on the AP exam. If a piece of copper metal was placed in a solution of Sn(NO3)2(aq) there would be no reaction, since copper is lower than tin on the activity series. This table allows us to also predict that if sodium metal is placed in water, it will displace hydrogen, forming hydrogen gas: 2 Na( s) + 2 H2O( l ) → 2 NaOH(aq ) + H 2 ( g ) 2 Na( s) + 2 H 2O( l ) → 2 Na + (aq ) + 2 OH− (aq ) + H2 ( g ) The Group IA and IIA elements on the activity table will displace hydrogen from water, but not the other metals shown. All the metals above hydrogen will react with acidic solutions to produce hydrogen gas: Co( s) + 2 HCl(aq ) → CoCl 2 (aq ) + H 2 (g ) Co( s) + 2 H + (aq ) → Co 2+ (aq ) + H 2 ( g )


Halogen reactivity decreases as one goes from top to bottom in the periodic table, because of the decreasing electronegativity. Therefore, a separate activity series for the halogens can be developed: F2 Cl 2 Br2 I2 The above series indicates that if chlorine gas were dissolved in a KI(aq) solution, the elemental chlorine would displace the iodide ion: Cl 2 (aq ) + 2 KI(aq ) → 2 KCl(aq ) + I2 (s) Cl 2 (aq ) + 2 I− (aq ) → 2 Cl − (aq ) + I2 (s)

Combustion Reactions Combustion reactions are redox reactions in which the chemical species rapidly combines with oxygen and usually emits heat and light. Reactions of this type are extremely important in our society as the sources of heat energy. Complete combustion of carbon yields carbon dioxide, and complete combustion of hydrogen yields water. The complete combustion of hydrocarbons, organic compounds containing only carbon and hydrogen, yields carbon dioxide and water: 2 C 2H6 ( g ) + 7 O2 ( g ) → 4CO2 ( g ) + 6 H 2O( g ) If the compound also contains oxygen, such as in alcohols, ethers, etc., the products are still carbon dioxide and water: 2 CH3OH( l ) + 3 O2 (g ) → 2CO2 (g ) + 4 H 2O(g ) If the compound contains sulfur, the complete combustion produces sulfur dioxide, SO2: 2 C 2H6 S(g ) + 9 O2 (g ) → 4 CO2 ( g ) + 6 H 2O( g ) + 2 SO2 (g ) If nitrogen is present, it will normally form the very stable nitrogen gas, N2. In all of these reactions, the driving force is the highly reactive oxygen forming a very stable compound(s). This is shown by the exothermic nature of the reaction. TIP

In balancing any of these combustion reactions, it is helpful to balance the oxygen last.

Coordination Compounds When a salt is dissolved in water, the metal ions, especially transition metal ions, form a complex ion with water molecules and/or other species. A complex ion is composed of a metal ion bonded to two or more molecules or ions called ligands. These are Lewis 3+ acid–base reactions. For example, suppose Cr(NO3)3 is dissolved in water. The Cr 3+ cation attracts water molecules to form the complex ion Cr(H2O)6 . In this complex ion, water acts as the ligand. If ammonia is added to this solution, the ammonia can displace the water molecules from the complex: [Cr(H 2O)6 ]3+ ( aq ) + 6 NH3 (aq ) [Cr(NH3 )6 ]3+ (aq ) + 6 H 2O( l )

76 U STEP 4. Review the Knowledge You Need to Score High In reactions involving coordination compounds, the metal acts as the Lewis acid (electron-pair acceptor), while the ligand acts as a Lewis base (electron-pair donor). In the reaction above, the ammonia ligand displaced the water ligand from the chromium complex because nitrogen is a better electron-pair donor (less electronegative) than oxygen. The nitrogen in the ammonia and the oxygen in the water are the donor atoms. They are the atoms that actually donate the electrons to the Lewis acid. The coordination number is the number of donor atoms that surround the central atom. As seen above, the coordination number for Cr3+ is 6. Coordination numbers are usually 2, 4 or 6, but other values can be possible. Silver (Ag+) commonly forms complexes with a coordination number of 2; zinc (Zn2+), copper (Cu2+), nickel (Ni2+ ), and platinum (Pt2+) commonly form complexes with a coordination number of 4; most other central ions have a coordination number of 6. + AgCl( s) + 2 NH3 (aq ) → ⎡⎣ Ag(NH3 )2 ⎤⎦ (aq ) + Cl − (aq ) 2−

Zn(OH)2 ( s) + 2 OH − (aq ) → ⎡⎣ Zn(OH)4 ⎤⎦ (aq ) 3−

Fe 3+ (aq ) + 6 CN − (aq ) → ⎡⎣Fe(CN)6 ⎤⎦ (aq )

Acid–Base Reactions Acids and bases are extremely common, as are the reactions between acids and bases. The driving force is often the hydronium ion reacting with the hydroxide ion to form water. The chapter on Equilibrium describes the equilibrium reactions of acids and bases, as well as some information concerning acid–base titration. After you finish this section, you may want to review the acid–base part of the Equilibrium chapter.

Properties of Acids, Bases, and Salts At the macroscopic level, acids taste sour, may be damaging to the skin, and react with bases to yield salts. Bases taste bitter, feel slippery, and react with acids to form salts. + At the microscopic level, acids are defined as proton (H ) donors (Brønsted–Lowry + theory) or electron-pair acceptors (Lewis theory). Bases are defined as proton (H ) acceptors (Brønsted–Lowry theory) or electron-pair donors (Lewis theory). Consider the gas-phase reaction between hydrogen chloride and ammonia: HCl( g )+ :NH3 ( g ) → HNH3 + Cl − (or NH4+ Cl–) + + HCl is the acid, because it is donating an H and the H will accept an electron pair + from ammonia. Ammonia is the base, accepting the H and furnishing an electron pair that + the H will bond with via coordinate covalent bonding. Coordinate covalent bonds are covalent bonds in which one of the atoms furnishes both of the electrons for the bond. After the bond is formed, it is identical to a covalent bond formed by donation of one electron by both of the bonding atoms. Acids and bases may be strong, dissociating completely, or weak, partially dissociating and forming an equilibrium system.(See Chapter 15 for the details on weak acids and bases.) Strong acids include:

1. Hydrochloric, HCl STRATEGY

2. Hydrobromic, HBr 3. Hydroiodic, HI


4. Nitric, HNO3 5. Chloric, HClO3 6. Perchloric, HClO4 7. Sulfuric, H2SO4 The strong acids above are all compounds that ionize completely in aqueous solution, yielding hydrogen ions and the anions from the acid. Strong bases include: STRATEGY

1. Alkali metal (Group IA) hydroxides (LiOH, NaOH, KOH, RbOH, CsOH) 2. Ca(OH)2, Sr(OH)2, and Ba(OH)2 The strong bases listed above are all compounds that dissociate completely, yielding the hydroxide ion (which is really the base, not the compound). Unless told otherwise, assume that acids and bases not on the lists above are weak and will establish an equilibrium system when placed into water. Some salts have acid–base properties. For example, ammonium chloride, NH4Cl, when dissolved in water will dissociate and the ammonium ion will act as a weak acid, donating a proton. We will examine these acid–base properties in more detail in the next section. Certain oxides can have acidic or basic properties. These properties often become evident when the oxides are dissolved in water. In most case, reactions of this type are not redox reactions. Many oxides of metals that have a +1 or +2 charge are called basic oxides (basic anhydrides), because they will react with acids. Fe 2O3 ( s) + 6 HCl(aq ) → 2 FeCl 3 (aq ) + 3 H 2O( l ) Fe 2O3 ( s) + 6 H + (aq ) → 2 Fe 3+ (aq ) + 3 H 2O(l ) Many times they react with water to form a basic solution: Na 2O( s) + H2O( l ) → 2 NaOH(aq ) Na 2O(s) + H 2O(l ) → 2 Na + (aq ) + 2 OH − (aq ) Many nonmetal oxides are called acidic oxides (acidic anhydrides), because they react with water to form an acidic solution: CO2 ( g ) + H 2O(l ) → H 2CO3 (aq ) H2CO3(aq) is named carbonic acid and is the reason that most carbonated beverages are slightly acidic. It is also the reason that soft drinks have fizz, because carbonic acid will decompose to form carbon dioxide and water.

Acid–Base Reactions In general, acids react with bases to form a salt and, usually, water. The salt will depend upon which acid and base are used: HCl(aq ) + NaOH(aq ) → H 2O(l ) + NaCl(aq ) HNO3 ( aq ) + KOH( aq ) → H 2O( l ) + KNO3 ( aq ) HBr( aq ) + NH3 ( aq ) → NH 4 Br( aq )

78 U STEP 4. Review the Knowledge You Need to Score High Reactions of this type are called neutralization reactions. The first two neutralization equations are represented by the same net ionic equation: H + (aq ) + OH − (aq ) → H 2O(l ) In the third case, the net ionic equation is different: H+ ( aq ) + NH3 ( aq ) → NH+4 (aq ) As mentioned previously, certain salts have acid–base properties. In general, salts containing cations of strong bases and anions of strong acids are neither acidic nor basic. They are neutral, reacting with neither acids nor bases. An example would be potassium nitrate, KNO3. The potassium comes from the strong base KOH and the nitrate from the strong acid HNO3. Salts containing cations not of strong bases but with anions of strong acids behave as acidic salts. An example would be ammonium chloride, NH4Cl. 2 NH 4 Cl(aq ) + Ba (OH)2 (aq ) → BaCl 2 (aq ) + 2 NH3 (aq ) + 2 H 2O( l ) NH+4 (aq ) + OH− (aq ) → NH3 (aq ) + H 2O(l ) Cations of strong bases and anions not of strong acids are basic salts. An example would be sodium carbonate, Na2CO3. It reacts with an acid to form carbonic acid, which would then decompose to carbon dioxide and water: 2 HCl(aq) + Na2CO3(aq) → 2 NaCl(aq) + H2CO3(aq) ↓ CO2(g) + H2O(l) + 2− 2 H (aq) + CO3 → H2CO3(aq) → CO2(g) + H2O(l)

The same type of reaction would be true for acid carbonates, such as sodium bicarbonate, NaHCO3. Another group of compounds that have acid–base properties are the hydrides of the alkali metals and of calcium, strontium, and barium. These hydrides will react with water to form the hydroxide ion and hydrogen gas: NaH(s) + H 2O( l ) → NaOH(aq ) + H 2 (g ) NaH(s) + H 2O(l ) → Na + (a q ) + OH− ( aq ) + H 2 ( g ) + − Note that in this case, water is behaving as H OH .

Acid–Base Titrations A common laboratory application of acid–base reactions is a titration. A titration is a laboratory procedure in which a solution of known concentration is used to determine the concentration of an unknown solution. For strong acid/strong base titration systems, the net ionic equation is: H+ ( aq ) + OH− ( aq ) → H 2O( l ) For example, suppose you wanted to determine the molarity of an HCl solution. You would pipet a known volume of the acid into a flask and add a couple drops of a suitable acid–base indicator. An indicator that is commonly used is phenolphthalein, which is


colorless in an acidic solution and pink in a basic solution. You would then fill a buret with a strong base solution (NaOH is commonly used) of known concentration. The buret allows you to add small amounts of the base solution to the acid solution in the flask. The course of the titration can also be followed by the use of a pH meter. Initially the pH of the solution will be low, since it is an acid solution. As the base is added and neutralization of the acid takes place, the pH will slowly rise. Small amounts of the base are added until one reaches the equivalence point. The equivalence point is that point in the titration where + the number of moles of H in the acid solution has been exactly neutralized with the same − number of moles of OH : moles H+ = moles OH− at the equivalence point For the titration of a strong acid with a strong base, the pH rapidly rises in the vicinity of the equivalence point. Then, as the tiniest amount of base is added in excess, the indicator turns pink. This is called the endpoint of the titration. In an accurate titration the endpoint will be as close to the equivalence point as possible. For simple titrations that do not use a pH meter, it is assumed that the endpoint and the equivalence point are the same, so that: moles H + = moles OH − at the endpoint

pH

After the equivalence point has been passed, the pH is greater than 7 (basic solution) and begins to level out somewhat. Figure 6.1 shows the shape of the curve for this titration. Reaction stoichiometry can then be used to solve for the molarity of the acid solution. See the Stoichiometry chapter for a discussion of solution stoichiometry. An unknown base can be titrated with an acid solution of known concentration. One major difference is that the pH will be greater than 7 initially and will decrease as the titration proceeds. The other major difference is that the indicator will start off pink, and the color will vanish at the endpoint.

7.0

Equivalence point

Vol NaOH added (mL) Figure 6.1

Titration of a strong acid with a strong base.



Laboratory experiments involving reactions are usually concerned with both the reaction and the stoichiometry. Typical experiments involving these concepts are 7, 14, 15, and 20 in the Experimental chapter. You need some idea of the balanced chemical equation. In the case of an acid–base + + reaction, an acid reacts with a base. The acid supplies H and the base accepts the H . + If the acid is diprotic, such as H2SO4, it can donate two H . The key to any reaction experiment is moles. The numbers of moles may be calculated from various measurements. A sample may be weighed on a balance to give the mass, and the moles calculated with the formula weight. Or the mass of a substance may be determined using a volume measurement combined with the density. The volume of a solution may be measured with a pipet, or calculated from the final and initial readings from a buret. This volume, along with the molarity, can be used to calculate the moles present. The volume, temperature, and pressure of a gas can be measured and used to calculate the moles of a gas. You must be extremely careful on the AP exam to distinguish between those values that you measure and those that you calculate. The moles of any substance in a reaction may be converted to the moles of any other substance through a calculation using the balanced chemical equation. Other calculations are presented in the stoichiometry chapter.


1. In balancing chemical equations don’t change the subscripts in the chemical formula, just the coefficients. 2. Molecular compounds ionize, ionic compounds dissociate. 3. In writing ionic and net ionic equations, show the chemical species as they actually exist in solution (i.e., strong electrolytes as ions, etc.). 4. In writing ionic and net ionic equations, don’t break apart covalently bonded compounds unless they are strong acids that are ionizing. 5. Know the solubility rules as guidelines, not explanations. 6. Oxidizing and reducing agents are reactants, not products. 7. The products of the complete combustion of a hydrocarbon are carbon dioxide and water. This is also true if oxygen is present as well; but if some other element, like sulfur, is present you will also have something else in addition to carbon dioxide and water. 8. If a substance that does not contain carbon, like elemental sulfur, undergoes complete combustion, no carbon dioxide can be formed. − 9. If an alcohol like methanol, CH3OH, is dissolved in water, no hydroxide ion, OH , will be formed.

10. Know the strong acids and bases. 11. HF is not a strong acid. 12. In titration calculations, you must consider the reaction stoichiometry. 13. Be sure to indicate the charges on ions correctly. 14. The common coordination numbers of complex ions are 2, 4, and 6. 15. Do not confuse measured values and calculated values.


U Review Questions You have 20 minutes. You may not use a calculator. 1. ___ Fe(OH)2(s) + ___ H3PO4(aq) → ___ Fe3(PO4)2(s) + ___ H2O(l) After the above chemical equation is balanced the lowest whole-number coefficient for water is: (A) 3 (B) 1 (C) 9 (D) 6 (E) 12 Choose one of the following for questions 2–4. 2+

(A) Cu (B) CO32− (C) Fe3+ (D) Al3+ (E) Pb2+

7. Which of the following is the correct net ionic equation for the reaction of acetic acid with potassium hydroxide? −

− (A) HC2H3O2 + OH → C2H3O2 + H2O + + (B) HC2H3O2 + K → KC2H3O2 + H (C) HC2H3O2 + KOH → KC2H3O2 + H2O + − (D) H + OH → H2O − (E) C2H3O2− + KOH → KC2H3O2 + OH

8. Which of the following is the correct net ionic equation for the addition of aqueous ammonia to a precipitate of silver chloride? +

−

(A) AgCl + 4 NH3 → [Ag(NH3)4] + Cl 3+ − (B) AgCl + 2 NH4+ → [Ag(NH4)2] + Cl + + (C) AgCl + NH4 → Ag + NH4Cl + (D) AgCl + NH3 → Ag + NH3Cl + − (E) AgCl + 2 NH3 → [Ag(NH3)2] + Cl

2. This ion will generate gas bubbles when hydrochloric acid is added. 3. This ion initially gives a white precipitate when dilute sodium hydroxide is added to a solution containing this ion. The precipitate will dissolve in excess sodium hydroxide. 4. Aqueous solutions of this ion are blue. 5. Which of the following best represents the balanced net ionic equation for the reaction of lead(II) carbonate with concentrated hydrochloric acid? +

−

(A) Pb2CO3 + 2 H + Cl → Pb2Cl + CO2 + H2O + − (B) PbCO3 + 2 H + 2 Cl → PbCl2 + CO2 + H2O + 2+ (C) PbCO3 + 2 H → Pb + CO2 + H2O − (D) PbCO3 + 2 Cl → PbCl2 + CO32− (E) PbCO3 + 2 HCl → PbCl2 + CO2 + H2O 6. A sample of copper metal is reacted with concentrated nitric acid in the absence of air. After the reaction, which of these final products are present? (A) CuNO3 and H2O (B) Cu(NO3)3, NO, and H2O (C) Cu(NO3)2, NO, and H2O (D) CuNO3, H2O, and H2 (E) Cu(NO3)2, NO, and H2

9. Potassium metal will react with water to release a gas and a potassium compound. Which of the following is a false statement? (A) The solution is acidic. (B) The gas is hydrogen. (C) The potassium compound is water-soluble. (D) The potassium compound will react with hydrochloric acid. (E) A solution of the potassium compound will form a precipitate when added to an FeCl2 solution. 2+

10. A sample is tested for the presence of the Hg2 ion. This ion, along with others, may be precipitated with chloride ion. If Hg22+ is present in the chloride precipitate, a black color will form upon treatment with aqueous ammonia. The balanced net ionic equation for the formation of this black color is: (A) Hg2Cl2 + 2 NH3 + 2 H2O → − − 2 Hg + 2 NH4+ + 2 Cl + 2 OH (B) Hg2Cl2 + 2 NH3 → 2 Hg + 2 NH3Cl (C) Hg2Cl2 + 2 NH4+ → 2 Hg + 2 NH4Cl + − (D) Hg2Cl2 + NH4 → 2 Hg + NH4Cl + Cl (E) Hg2Cl2 + 2 NH3 → − Hg + HgNH2Cl + NH4+ + Cl

82 U STEP 4. Review the Knowledge You Need to Score High 11. Which of the following solids is not soluble in water, but is soluble in dilute nitric acid (HNO3)? (A) NaOH (B) BaCO3 (C) AgCl (D) (NH4)3PO4 (E) FeCl2 12. What is the minimum number of moles of Pb(NO3)2 must be added to 0.10 L of a solution that is 1.0 M in MgCl2 and 1.0 M in KCl? The compound PbCl2 precipitates. (A) 1.0 moles (B) 0.20 moles (C) 0.50 moles (D) 0.15 moles (E) 0.30 moles 13. When 50.0 mL of 1.0 M AgNO3 is added to 50.0 mL of 0.50 M HCl a precipitate of AgCl forms. After the reaction is complete, what is the concentration of silver ions in the solution? (A) 0.50 M (B) 0.0 M (C) 1.0 M (D) 0.25 M (E) 0.75 M 14. A student mixes 50.0 mL of 0.10 M Pb(NO3)2 solution with 50.0 mL of 0.10 M KCl. A white precipitate forms, and the concentration of the chloride ion becomes very small. Which of the following correctly places the concentrations of the remaining ions in order of decreasing concentration? 2+ + − (A) [NO3 ] > [Pb ] > [K ] + 2+ − (B) [NO3 ] > [K ] > [Pb ] + 2+ (C) [K ] > [NO3− ] > [Pb ] 2+ + − (D) [Pb ] > [NO3 ] > [K ] 2+ + − (E) [Pb ] > [K ] > [NO3 ]

15. A solution is prepared for qualitative analysis. 2+ The solution contains the following ions: Co , 2+ 3+ Pb , and Al . Which of the following will cause no observable reaction? (A) Dilute NH3(aq) is added. (B) Dilute K2CrO4(aq) is added. (C) Dilute HNO3(aq) is added. (D) Dilute K2S(aq) is added. (E) Dilute HCl(aq) is added.

16. Chlorine gas is bubbled through a colorless solution and the solution turns reddish. Adding a little methylene chloride to the solution extracts the color into the methylene chloride layer. Which of the following ions may be present in the original solution? −

(A) Cl (B) I− (C) SO42− (D) Na+ (E) Br− 17. The addition of concentrated NaOH(aq) to a 1.0 M (NH4)2SO4 solution will result in which of the following observations? (A) The solution becomes neutral. (B) The formation of a brown precipitate takes place. (C) Nothing happens because the two solutions are immiscible. (D) The odor of ammonia will be detected. (E) An odorless gas forms and bubbles out of the mixture. 18. Which of the following solutions will give a yellow precipitate when a 0.1 M Na2CrO4 solution is added to a 0.1 M solution of the ion listed? + (A) K (aq) 2+ (B) Pb (aq) (C) NO3−(aq) − (D) OH (aq) (E) NH4+(aq)


U Answers and Explanations 1. D—The balanced equation is: 3Fe(OH)2 (s) + 2 H3PO 4 (aq ) → Fe 3 (PO 4 )2 ( s) + 6 H 2O (l ) 2. B—Carbonates produce carbon dioxide gas in the presence of an acid. 3. D—Aluminum hydroxide, Al(OH)3, forms initially but then dissolves to form the Al(OH)4− ion. 2+ 4. A—Aqueous solutions of Cu are normally blue. Iron ions give a variety of colors, but are normally colorless, or nearly so, in the absence of complexing agents. All the others are colorless.

5. B—Lead(II) carbonate is insoluble, so its formula should be left as PbCO3. Hydrochloric acid is a strong acid so it should be written as + − separate H and Cl ions. Lead(II) chloride, PbCl2, is insoluble, and carbonic acid, H2CO3, quickly decomposes to CO2 and H2O. 6. C—The balanced chemical equation is: 3 Cu + 8 HNO3 → 3 Cu( NO3 )2 + 2 NO + 4 H 2O The copper is below hydrogen on the activity series, so H2 cannot be formed by this acid–metal reaction. Nitric acid is an oxidizing 2+ agent, which will oxidize copper to Cu giving Cu(NO3)2. 7. A—Acetic acid is a weak acid; as such it should appear as HC2H3O2. Potassium hydroxide is + a strong base so it will separate into K and − OH ions. The potassium ion is a spectator ion, and is left out of the net ionic equation. 8. E—Aqueous ammonia contains NH3. The reaction produces the silver–ammonia complex, + [Ag(NH3)2] . 9. A—The reaction is: 2 K + 2 H 2O → 2 KOH + H 2 KOH is a water-soluble strong base, not an acid. As a strong base it will react with an acid. Iron(II) hydroxide, Fe(OH)2, is insoluble and will precipitate.

10. E—Aqueous ammonia contains NH3. The charges on each side of the reaction arrow must be equal. 11. B—Neither B nor C is soluble in water. Only B will react will nitric acid, and will dissolve. 12. D—The magnesium chloride gives 0.20 moles of chloride ion, and the potassium chloride gives 0.10 moles of chloride ion. A total of 0.30 moles of chloride will react with 0.15 moles of lead, − 2+ because two Cl require one Pb . 13. D—The HCl will react with one-half the silver to halve the concentration. The doubling of the volume halves the concentration a second time. 14. B—All the potassium and nitrate ions remain in solution. However, two nitrate ions are produced per solute formula as opposed to only one potassium ion. The lead and potassium would be equal, but some of the lead is precipitated as PbCl2. 15. C—Ammonia, as a base, will precipitate the metal hydroxides. Chromate, sulfide, and chloride ions will precipitate one or more of the ions. 16. E—Chlorine is an oxidizing agent. It is capable of oxidizing both B and E. Answer B gives I2, which is brownish in water and purplish in methylene chloride. Answer E gives reddish Br2. + 17. D—The following reaction occurs: NH4 (aq) + − OH (aq) → NH3(g) + H2O(l)

18. B—The precipitate is PbCrO4.


U Free-Response Questions First Free-Response Question You have 10 minutes. You may not use a calculator. Answer all three of the following questions. Each question will have two parts—writing the balanced chemical equation and answering a question about the reaction. Coefficients in the balanced chemical equation must be in the lowest whole-number ratio. Do not include formulas for substances that remain unchanged during the reaction. Unless otherwise noted, assume all the reactions occur in aqueous solution. If a substance is extensively ionized and therefore is present as ions in solution, write its formula as ions. Example: Hydrochloric acid is added to a lead(II) nitrate solution. Pb2+ + 2 Cl − → PbCl 2 a. Excess sodium hydroxide is added to an aluminum sulfate solution. Which species behaves as a Lewis acid in the reaction? Explain. b. An acidified iron(II) sulfate solution is added to a potassium permanganate solution. Describe the color change occurring as the reaction proceeds. c. Dichlorine heptaoxide is mixed with water. What is the oxidation number of the chlorine in the product?

Second Free-Response Question You have 10 minutes. You may not use a calculator. Answer all three of the following questions. Each question will have two parts—writing the balanced chemical equation and answering a question about the reaction. Coefficients in the balanced chemical equation must be in the lowest whole-number ratio. Do not include formulas for substances that remain unchanged during the reaction. Unless otherwise noted, assume all the reactions occur in aqueous solution. If a substance is extensively ionized and therefore is present as ions in solution, write its formula as ions. Example: Hydrochloric acid is added to a lead(II) nitrate solution. 2+ − Pb + 2 Cl → PbCl2

a. Metallic strontium is added to warm water. If phenolphthalein indicator was added to the resulting solution, what would be the color of the solution? Explain. b. Solid manganese(IV) oxide is added to concentrated hydrochloric acid. What is the oxidation number of the species being oxidized before and after the reaction takes place? c. A lead(II) nitrate solution is mixed with an ammonium sulfate solution. Which ions, if any, are spectator ions in this reaction?


U Answers and Explanations First Free-Response Question −

a. 4 OH + Al → Al(OH)4− 3+

The aluminum ion behaves as the Lewis acid, because it is accepting electron pairs from the hydroxide anion. You get 1 point for the correct formulas for the reactants and products and 1 point for the correct coefficients in the balanced equation. Answering the associated question correctly is worth 1 point. 2+ + 3+ 2+ − b. 5 Fe + 8 H + MnO4 → 5 Fe + Mn + 4 H2O

The purple color of the permanganate ion slowly disappears as the reaction proceeds. You get 1 point for the correct formulas for the reactants and products and 1 point for the correct coefficients in the balanced equation. Answering the associated question correctly is worth 1 point. + − c. Cl2O7 + H2O → 2 H + 2 ClO4

The oxidation number of the chlorine in the perchlorate ion is +7. You get 1 point for the correct formulas for the reactants and products and 1 point for the correct coefficients in the balanced equation. Answering the associated question correctly is worth 1 point. There is a maximum of 9 points possible.

Second Free-Response Question a. Sr + 2 H2O → Sr2+ + 2 OH− + H2 The resulting solution is basic owing to the presence of the hydroxide ion. The phenolphthalein indicator is pink in basic solutions, so the solution would be pink. You get 1 point for the correct formulas for the reactants and products and 1 point for the correct coefficients in the balanced equation. Answering the associated question correctly is worth 1 point. + − 2+ b. MnO2 + 4 H + 2 Cl → Mn + Cl2 + 2 H2O

Chlorine is being oxidized from −1 in the chloride ion to 0 in diatomic chlorine gas. You get 1 point for the correct formulas for the reactants and products and 1 point for the correct coefficients in the balanced equation. Answering the associated question correctly is worth 1 point. 2+ 2− c. Pb + SO4 → PbSO4

The spectator ions are the nitrate ions (NO3− ) and the ammonium ions (NH4+ ). You get 1 point for the correct formulas for the reactants and products and 1 point for the correct coefficients in the balanced equation. Answering the associated question correctly is worth 1 point. There is a maximum of 9 points possible.


U Rapid Review G

G

G

Reactions will always occur in the free-response section of the AP exam. This may not be true in the multiple-choice part. Energy may be released in a reaction (exothermic) or absorbed (endothermic). Chemical equations are balanced by adding coefficients in front of the chemical species until the number of each type of atom is the same on both the right and left sides of the arrow.

G

The coefficients in the balanced equation must be in the lowest whole-number ratio.

G

Water is the universal solvent, dissolving a wide variety of both ionic and polar substances.

G

G

G

G

G

Electrolytes are substances that conduct an electrical current when dissolved in water; nonelectrolytes do not. Most ions in solution attract and bind a layer of water molecules in a process called solvation. Some molecular compounds, like acids, ionize in water, forming ions. In the molecular equation, the reactants and products are shown in their undissociated/unionized form; the ionic equation shows the strong electrolytes in the form of ions; the net ionic equation drops out all spectator ions and shows only those species that are undergoing chemical change. Precipitation reactions form an insoluble compound, a precipitate, from the mixing of two soluble compounds.

G

Learn and be able to apply the solubility rules.

G

Redox reactions are reactions where oxidation and reduction take place simultaneously.

G

Oxidation is the loss of electrons and reduction is the gain of electrons.

G

G

G

G

G

G

Oxidizing agents are reactants that cause oxidation to take place (the reactant being reduced), and reducing agents are reactant species that cause reduction to take place (the reactant being oxidized). Combination reactions are usually redox reactions in which two or more reactants (elements or compounds) combine to form one product. Decomposition reactions are usually redox reactions in which a compound breaks down into two or more simpler substances. Single displacement reactions are redox reactions in which atoms of an element replace the atoms of another element in a compound. Know how to use the activity series to predict whether or not an element will displace another element. Combustion reactions are redox reactions in which the chemical species rapidly combine with diatomic oxygen gas, emitting heat and light. The products of the complete combustion of a hydrocarbon are carbon dioxide and water.

G

Indicators are substances that exhibit different colors under acidic or basic conditions.

G

Acids are proton donors (electron-pair acceptors).

Reactions and Periodicity Í 87 G

G

G

Bases are proton acceptors (electron-pair donors) Coordinate covalent bonds are covalent bonds in which one atom furnishes both of the electrons for the bond. Strong acids and bases completely ionize/dissociate, and weak acids and bases only partially ionize/dissociate.

G

Know the strong acids and bases.

G

Acids react with bases to form a salt and usually water in a neutralization reaction.

G

Many hydrides react with water to form the hydroxide ion and hydrogen gas.

G

G

G

G

A titration is a laboratory procedure for determining the concentration of an unknown solution using a solution of known concentration. The equivalence point of an acid–base titration is the point at which the moles of + − H from the acid equals the moles of OH from the base. The endpoint is the point at which the indicator changes color, indicating the equivalence point. A complex ion is composed of a metal ion (Lewis acid) covalently bonded to two or more molecules or anions called ligands (Lewis base). The coordination number (usually 2, 4, or 6) is the number of donor atoms that can surround a metal ion in a complex.

CHAPTER

7

Stoichiometry IN THIS CHAPTER Summary: The previous chapter on chemical reactions discussed reactants and products in terms of individual atoms and molecules. But an industrial chemist is not interested in the number of molecules being produced; she or he is interested in kilograms or pounds or tons of products being formed per hour or day. How many kilograms of reactants will it take? How many kilograms of products will be formed? These are the questions of interest. A production chemist is interested primarily in the macroscopic world, not the microscopic one of atoms and molecules. Even a chemistry student working in the laboratory will not be weighing out individual atoms and molecules, but large numbers of them in grams. There must be a way to bridge the gap between the microscopic world of individual atoms and molecules, and the macroscopic world of grams and kilograms. There is—it is called the mole concept, and it is one of the central concepts in the world of chemistry. Keywords and Equations KEY IDEA

Avogadro’s number = 6.022 × 1023 mol−1 Molarity, M = moles solute per liter solution n = moles

m = mass M = molar mass

88 U

n=

m M

Stoichiometry Í 89

Moles and Molar Mass The mole (mol) is the amount of a substance that contains the same number of particles as atoms in exactly 12 grams of carbon-12. This number of particles (atoms or molecules or 23 ions) per mole is called Avogadro’s number and is numerically equal to 6.022 × 10 particles. The mole is simply a term that represents a certain number of particles, like a dozen or a pair. That relates moles to the microscopic world, but what about the macroscopic world? The mole also represents a certain mass of a chemical substance. That mass is the substance’s atomic or molecular mass expressed in grams. In Chapter 5, the Basics chapter, we described the atomic mass of an element in terms of atomic mass units (amu). This was the mass associated with an individual atom. Then we described how one could calculate the mass of a compound by simply adding together the masses, in amu, of the individual elements in the compound. This is still the case, but at the macroscopic level the unit of grams is used to represent the quantity of a mole. Thus, the following relationships apply: 23 6.022 × 10 particles = 1 mol

= atomic (molecular, formula) mass in grams

KEY IDEA

The mass in grams of one mole of a substance is the molar mass. The relationship above gives a way of converting from grams to moles to particles, and vice versa. If you have any one of the three quantities, you can calculate the other two. This becomes extremely useful in working with chemical equations, as we will see later, because the coefficients in the balanced chemical equation are not only the number of individual atoms or molecules at the microscopic level, but also the number of moles at the macroscopic level. 25 How many moles are present in 1.20 × 10 silver atoms? Answer: ⎛ 1mol Ag atoms ⎞ (1.20 × 1025 Ag atoms) ⎜ ⎟ = 19.9 mol Ag 23 ⎝ 6.022 × 10 Ag atoms ⎠

Percent Composition and Empirical Formulas If the formula of a compound is known, it is a fairly straightforward task to determine the percent composition of each element in the compound. For example, suppose you want to calculate the percentage hydrogen and oxygen in water, H2O. First calculate the molecular mass of water: 1 mol H2O = 2 mol H + 1 mol O Substituting the masses involved: 1 mol H2O = 2 (1.0079 g/mol) + 16.00 g/mol = 18.0158 g/mol (intermediate calculation—don’t worry about significant figures yet) percentage hydrogen

percentage oxygen

= [mass H/mass H2O] × 100 = [2(1.0079 g/mol)/18.0158 g/mol] × 100 = 11.19% H = [mass O/mass H2O] × 100 = [16.00 g/mol/18.0158 g/mol] × 100 = 88.81% O

90 U STEP 4. Review the Knowledge You Need to Score High As a good check, add the percentages together. They should equal to 100% or be very close. Determine the mass percent of each of the elements in C6H12O6 (FM) = 180.158 amu

Formula mass

Answer: (6C atoms)(12.011 amu/atom) × 100% = 40.002% (180.158 amu) m) (12 Hatoms)(1.008 amu/atom × 100% = 6.714% %H = (180.158 amu) (6Oatoms)(15.9994 amu/atom) × 100% = 53.2846% %O = (180.158 amu) Total = 100.001% %C =

The total is a check. It should be very close to 100%. In the problems above, the percentage data was calculated from the chemical formula, but the empirical formula can be determined if the percent compositions of the various elements are known. The empirical formula tells us what elements are present in the compound and the simplest whole-number ratio of elements. The data may be in terms of percentage, or mass, or even moles. But the procedure is still the same: convert each to moles, divide each by the smallest number, then use an appropriate multiplier if needed. The empirical formula mass can then be calculated. If the actual molecular mass is known, dividing the molecular mass by the empirical formula mass gives an integer (rounded if needed) that is used to multiply each of the subscripts in the empirical formula. This gives the molecular (actual) formula, which tells which elements are in the compound and the actual number of each. For example, a sample of a gas was analyzed and found to contain 2.34 g of nitrogen and 5.34 g of oxygen. The molar mass of the gas was determined to be about 90 g/mol. What are the empirical and molecular formulas of this gas? Answer: ⎛ 1molN ⎞ ( 2 .34 g N) ⎜ ⎟ = 0 .167 mol N ⎝ 14.0 g N ⎠ ⎛ 1molO ⎞ (5.34 g O) ⎜ ⎟ = 0 .334 mol O ⎝ 16.0 g O ⎠ ∴ Empirical Formula = NO2

⎛ 0.167 ⎞ ⎜ ⎟ =1 N ⎝ 0.167 ⎠ ⎛ 0.334 ⎞ ⎜ ⎟= 2 O ⎝ 0.167 ⎠

The molecular formula may be determined by dividing the actual molar mass of the compound by the empirical molar mass. In this case the empirical molar mass is 46 g/mol. ⎛ 90 g/mol ⎞ ⎟ = 1 .96 which, to one significant figure, is 2. Therefore, the molecular Thus ⎜ ⎝ 46 g/mol ⎠ formula is twice the empirical formula—N2O4. TIP

Be sure to use as many significant digits as possible in the molar masses. Failure to do so may give you erroneous ratio and empirical formulas.

Stoichiometry Í 91

Reaction Stoichiometry As we have discussed previously, the balanced chemical equation not only indicates which chemical species are the reactants and the products, but also indicates the relative ratio of reactants and products. Consider the balanced equation of the Haber process for the production of ammonia: N2(g) + 3H2(g) → 2 NH3(g) This balanced equation can be read as: 1 nitrogen molecule reacts with 3 hydrogen molecules to produce 2 ammonia molecules. But as indicated previously, the coefficients can stand not only for the number of atoms or molecules (microscopic level), they can also stand for the number of moles of reactants or products. The equation can also be read as: 1 mol of nitrogen molecules reacts with 3 mol of hydrogen molecules to produce 2 mol of ammonia molecules. And if the number of moles is known, the number of grams or molecules can be calculated. This is stoichiometry, the calculation of the amount (mass, moles, particles) of one substance in a chemical reaction through the use of another. The coefficients in a balanced chemical equation define the mathematical relationship between the reactants and products, and allow the conversion from moles of one chemical species in the reaction to another. Consider the Haber process above. How many moles of ammonia could be produced from the reaction of 20.0 mol of nitrogen with excess hydrogen? STRATEGY

Before any stoichiometry calculation can be done, you must have a balanced chemical equation! You are starting with moles of nitrogen and want moles of ammonia, so we’ll convert from moles of nitrogen to moles of ammonia by using the ratio of moles of ammonia to moles of nitrogen as defined by the balanced chemical equation: 20.0 mol N 2 2 mol NH3 × = 40.0 mol NH3 1 1 mol N 2 The ratio of 2 mol NH3 to 1 mol N2 is called the stoichiometric ratio and comes from the balanced chemical equation. Suppose you also wanted to know how many moles of hydrogen it would take to fully react with the 20.0 mol of nitrogen. Just change the stoichiometric ratio: 20.0 mol N 2 3 mol H 2 × = 60.0 mol H 2 1 1 mol N 2 Notice that this new stoichiometric ratio also came from the balanced chemical equation. Suppose instead of moles you had grams and wanted an answer in grams. How many grams of ammonia could be produced from the reaction of 85.0g of hydrogen gas with excess nitrogen?

TIP

In working problems that involve something other than moles, you will still need moles. And you will need the balanced chemical equation. In this problem we will convert from grams of hydrogen to moles of hydrogen to moles of ammonia using the correct stoichiometric ratio, and finally to grams of ammonia. And we will need the molar mass of H2 (2.0158 g/mol) and ammonia (17.0307 g/mol): 85 .0 g H 2 1 molH 2 2 molNH3 17 .03 0 7 g × × × = 478 .8 g NH3 1 2.0158 g 3 molH 2 1 molNH3 Actually, you could have calculated the actual number of ammonia molecules produced if you had gone from moles of ammonia to molecules (using Avogadro’s number): 85 .0 g H 2 1 molH 2 2 molNH3 6 .022 ×1023 moleculesNH3 × × × 1 2 .0158 g 3 molH 2 1 molNH3 25 = 1 .693 ×10 molecules NH3

92 U STEP 4. Review the Knowledge You Need to Score High In another reaction, 40.0 g of Cl2 and excess H2 are combined. HCl will be produced. How many grams of HCl will form? H2(g) + Cl2(g) → 2 HCl(g) ⎛ 1 mol Cl ⎞ ⎛ 2 mol HCl ⎞ ⎛ 36.461 g HCl ⎞ 2 Answer: ( 40.0 g Cl 2 ) ⎜ ⎟⎜ ⎟⎜ ⎟ = 41.1 g HCl 70.906 g Cl 1 mol Cl 2 ⎠ ⎝ 1 mol HCl ⎠ ⎝ 2 ⎠⎝

Limiting Reactants In the examples above, one reactant was present in excess. One reactant was completely consumed, and some of the other reactant would be left over. The reactant that is used up first is called the limiting reactant (L.R.). This reactant really determines the amount of product being formed. How is the limiting reactant determined? You can’t assume it is the reactant in the smallest amount, since the reaction stoichiometry must be considered. There are generally two ways to determine which reactant is the limiting reactant: 1. Each reactant, in turn, is assumed to be the limiting reactant, and the amount of product that would be formed is calculated. The reactant that yields the smallest amount of product is the limiting reactant. The advantage of this method is that you get to practice your calculation skills; the disadvantage is that you have to do more calculations. 2. The moles of reactant per coefficient of that reactant in the balanced chemical equation is calculated. The reactant that has the smallest mole-to-coefficient ratio is the limiting reactant. This is the method that many use. Let us consider the Haber reaction once more. Suppose that 50.0 g of nitrogen and 40.0 g of hydrogen were allowed to react. Calculate the number of grams of ammonia that could be formed. First, write the balanced chemical equation: N2(g) + 3 H2(g) → 2 NH3(g) Next, convert the grams of each reactant to moles: 50.0 g N 2 1 mol N 2 × = 1.7848 mol N 2 1 28.014 g N 2 40.0 g H 2 1 mol H 2 = 19.8432 mol H 2 1 2.0158 g H 2 Divide each by the coefficient in the balanced chemical equation. The smaller is the limiting reactant: For N2: 1.7848 mol N2/1 = 1.7848 mol/coefficient limiting reactant For H2: 19.8432 mol H2/3 = 6.6144 mol/coefficient Finally, base the stoichiometry of the reaction on the limiting reactant: 2 mol NH3 17.0307 g 50.0 g N 2 1 mol N 2 × = 60.8 g NH3 × × 1 28.014 g N 2 1 mol N 2 1 mol NH3 TIP

Anytime the quantities of more than one reactant are given it is probably a L.R. problem. Let’s consider another case. To carry out the following reaction: P2O5(s)+3H2O(l) → 2H3PO4 (aq) 125 g of P2O5 and 50.0 g of H2O were supplied. How many grams of H3PO4 may be produced?

Stoichiometry Í 93

Answer: 1. Convert to moles:

⎛ 1 mol P O ⎞ 2 5 ⎟⎟ = 0.880 mol P2O5 ⎝ 2 5⎠ ⎛ 1 mol H O ⎞ 2 (50.0 g H 2O) ⎜ ⎟ = 2.78 mol H 2O ⎝ 18.0 g H 2O ⎠

(125 g P O ) ⎜⎜142 g P O 2

5

2. Find the limiting reactant 0.880 mol = 0.880 P2O5 1 mol 2.78 mol = 0.927 H 2O 3 mol The 1 mol and the 3 mol come from the balanced chemical equation. The 0.880 is smaller, so this is the L.R. 3. Finish using the number of moles of the L.R. ⎛ 2 mol H PO ⎞ ⎛ 98.0 g H PO ⎞ 3 4 3 4 ⎟⎟ ⎜⎜ ⎟⎟ = 172 g 1 mol P O 1 mol H PO ⎝ 3 2 5 ⎠⎝ 4 ⎠

(0.880 mol P O ) ⎜⎜ 2

5

Percent Yield In the preceding problems, the amount of product calculated based on the limitingreactant concept is the maximum amount of product that could be formed from the given amount of reactants. This maximum amount of product formed is called the theoretical yield. However, rarely is the amount that is actually formed (the actual yield) the same as the theoretical yield. Normally it is less. There are many reasons for this, but the principal reason is that most reactions do not go to completion; they establish an equilibrium system (see the Equilibrium chapter for a discussion of chemical equilibrium). For whatever reason, not as much as expected is formed. The efficiency of the reaction can be judged by calculating the percent yield. The percent yield (% yield) is the actual yield divided by the theoretical yield, and the result is multiplied by 100% to generate percentage: % yield =

actual yield × 100% theoretical yield

Consider the problem in which it was calculated that 60.8 g NH3 could be formed. Suppose that reaction was carried out, and only 52.3 g NH3 was formed. What is the percent yield? % yield =

52.3 g × 100% = 86.0% 60.8 g

Let’s consider another percent yield problem in which a 25.0-g sample of calcium oxide is heated with excess hydrogen chloride to produce water and 37.5 g of calcium chloride. What is the percent yield of calcium chloride? CaO(s) + 2HCl(g) → CaCl2(aq) + H2O(l) Answer: ⎛ 1 mol CaO ⎞ ⎛ 1 mol CaCl2 ⎞ ⎛ 110.984 g CaCl2 ⎞ (25.0 g CaO) ⎜ ⎟⎜ ⎟ = 49.478 g CaCl2 ⎟⎜ ⎝ 56.077 g CaO ⎠ ⎝ 1 mol CaO ⎠ ⎝ 1 mol CaCl2 ⎠

94 U STEP 4. Review the Knowledge You Need to Score High The theoretical yield is 49.5 g. 37.5 g CaCl2 × 100% = 75.8% 49.478 g CaCl2 Note: All the units except % must cancel. This includes canceling g CaCl2 with g CaCl2, not simply g.

Molarity and Solution Calculations We discuss solutions further in the chapter on solutions and colligative properties, but solution stoichiometry is so common on the AP exam that we will discuss it here briefly also. Solutions are homogeneous mixtures composed of a solute (substance present in smaller amount) and a solvent (substance present in larger amount). If sodium chloride is dissolved in water, the NaCl is the solute and the water the solvent. One important aspect of solutions is their concentration, the amount of solute dissolved in the solvent. In the chapter on solutions and colligative properties we will cover several concentration units, but for the purpose of stoichiometry, the only concentration unit we will use at this time is molarity. Molarity (M) is defined as the moles of solute per liter of solution: M = mol solute/L solution Let’s start with a simple example of calculating molarity. A solution of NaCl contains 39.12 g of this compound in 100.0 mL of solution. Calculate the molarity of NaCl. Answer: ⎡⎣1 mol NaCl⎤⎦ (39.12 g NaCl) ⎡⎣58.45 g NaCl⎤⎦ = 6.693 M NaCl ⎡⎣1 L⎤⎦ (100.0 mL) ⎡⎣1000 mL⎤⎦ Knowing the volume of the solution and the molarity allows you to calculate the moles or grams of solute present. Next, let’s see how we can use molarity to calculate moles. How many moles of ammonium ions are in 0.100 L of a 0.20 M ammonium sulfate solution? Answer: ⎡ 0.20 mol (NH 4 )2 SO4 ⎤⎡ 2 mol NH 4 + ⎤ + ⎥(0.100 L) = 0.040 mol NH 4 ⎢ ⎥⎢ 4 2 L 1 mol (NH ) SO 4 ⎣ ⎦⎣ ⎦ Stoichiometry problems (including limiting-reactant problems) involving solutions can be worked in the same fashion as before, except that the volume and molarity of the solution must first be converted to moles. If 35.00 mL of a 0.1500 M KOH solution is required to titrate 40.00 mL of a phosphoric acid solution, what is the concentration of the acid? The reaction is: 2KOH (aq) + H3PO4 (aq) → K2HPO4 (aq) + 2H2O (l) Answer: (0.1500 mol KOH)(1 mol H3PO4 ) (1000 mL )( 2 mol KOH) = 0.06562 M H3PO4 (1 L ) 40.00 mL ( ) (1000 mL )

(35.00 mL )

Stoichiometry Í 95


Stoichiometry experiments must involve moles. They nearly always use a balanced chemical equation. Typical experiments involving these concepts are 1, 2, 6, 7, 8, 9, 16, and 17 in the Experimental chapter. Measurements include initial and final masses, and initial and final volumes. Calculations may include the difference between the initial and final values. Using the formula mass and the mass in grams, moles may be calculated. Moles may also be calculated from the volume of a solution and its molarity. Once the moles have been calculated (they are never measured), the experiment will be based on further calculations using these moles.


1. Avogadro’s number is 6.022 × 1023 (not 10−23). 2. Be sure to know the difference between molecules and moles. 3. In empirical formula problems, be sure to get the lowest ratio of whole numbers. 4. In stoichiometry problems, be sure to use the balanced chemical equation. 5. The stoichiometric ratio comes from the balanced chemical equation. 6. When in doubt, convert to moles. 7. In limiting-reactant problems, don’t consider just the number of grams or even moles to determine the limiting reactant—use the mol/coefficient ratio. 8. The limiting reactant is a reactant, a chemical species to the left of the reactant arrow. 9. Use the balanced chemical equation. 10. Percent yield is actual yield of a substance divided by the theoretical yield of the same substance multiplied by 100%. 11. Molarity is moles of solute per liter of solution, not solvent. 12. Be careful when using Avogadro’s number—use it when you need, or have the number of atoms, ions, or molecules.

U Review Questions Answer the following questions. You have 25 minutes, and you may not use a calculator. You may use the periodic table in the back of the book. For each question, circle the letter of your choice. 1. How many milliliters of 0.100 M H2SO4 are required to neutralize 50.0 mL of 0.200 M KOH? (A) 25.0 mL (B) 30.0 mL (C) 20.0 mL (D) 50.0 mL (E) 60.0 mL

2. A sample of oxalic acid, H2C2O4, is titrated with standard sodium hydroxide, NaOH, solution. A total of 45.20 mL of 0.1200 M NaOH is required to completely neutralize 20.00 mL of the acid. What is the concentration of the acid? (A) 0.2712 M (B) 0.1200 M (C) 0.1356 M (D) 0.2400 M (E) 0.5424 M

96 U STEP 4. Review the Knowledge You Need to Score High 3. A solution is prepared by mixing 50.0 mL of 0.20 M arsenic acid, H3AsO4, and 50.0 mL of 0.20 M sodium hydroxide, NaOH. Which anion is present in the highest concentration? 2−

(A) HAsO4 (B) OH− (C) H2AsO4− (D) Na+ (E) AsO33−

4. 14 H+ + 6 Fe2+ + Cr2O72− → 2 Cr3+ + 6 Fe3+ + 7 H2O This reaction is used in the titration of an iron solution. What is the concentration of the iron solution if it takes 45.20 mL of 0.1000 M 2− Cr2O7 solution to titrate 50.00 mL of an acidified iron solution? (A) 0.5424 M (B) 0.1000 M (C) 1.085 M (D) 0.4520 M (E) 0.2712 M 5. Tungsten metal may be prepared by reducing WO3 with H2 gas. How many grams of tungsten may be prepared from 0.0500 mol of WO3 with excess hydrogen? (A) 5.58 g (B) 0.500 g (C) 9.19 g (D) 184 g (E) 18.4 g 6. Manganese, Mn, forms a number of oxides. A particular oxide is 63.2% Mn. What is the simplest formula for this oxide? (A) MnO (B) Mn2O3 (C) Mn3O4 (D) MnO2 (E) Mn2O7 7. Vanadium forms a number of oxides. In which of the following oxides is the vanadiumto-oxygen mass ratio 2.39:1.00? (A) VO (B) V2O3 (C) V3O4 (D) VO2 (E) V2O5

8. How many grams of nitrogen are in 25.0 g of (NH4)2SO4? (A) 5.30 g (B) 1.30 g (C) 0.190 g (D) 2.65 g (E) 14.0 g 9. Nitrogen forms a number of oxides. Which of the following oxides is 64% nitrogen? (A) N2O5 (B) N2O4 (C) N2O3 (D) N2O2 (E) N2O 10. Sodium sulfate forms a number of hydrates. A sample of a hydrate is heated until all the water is removed. What is the formula of the original hydrate if it loses 43% of its mass when heated? (A) Na2SO4·H2O (B) Na2SO4·2H2O (C) Na2SO4·6H2O (D) Na2SO4·8H2O (E) Na2SO4·10H2O 11. 3Cu(s) + 8HNO3(aq) → 3Cu(NO3)2(aq) + 2 NO(g) + 4 H2O(l) Copper metal reacts with nitric acid according to the above equation. A 0.30-mol sample of copper metal and 10.0 mL of 12 M nitric acid are mixed in a flask. How many moles of NO gas will form? (A) 0.060 mol (B) 0.030 mol (C) 0.010 mol (D) 0.20 mol (E) 0.10 mol 12. Gold(III) oxide, Au2O3, can be decomposed to gold metal, Au, plus oxygen gas, O2. How many moles of oxygen gas will form when 221 g of solid gold(III) oxide is decomposed? The formula mass of gold(III) oxide is 442. (A) 0.250 mol (B) 0.500 mol (C) 1.50 mol (D) 1.00 mol (E) 0.750 mol

Stoichiometry Í 97

13. __C4H11N(1) + __O2(g) →__CO2(g) + __ H2O(l) + __ N2 (g) When the above equation is balanced, the lowest whole number coefficient for O2 is: (A) 4 (B) 16 (C) 22 (D) 27 (E) 2 14. 2 KMnO4 + 5 H2C2O4 + 3 H2SO4 → K2SO4

17. Ca + 2 H2O → Ca(OH)2 + H2 Calcium reacts with water according to the above reaction. What volume of hydrogen gas, at standard temperature and pressure, is produced from 0.200 mol of calcium? (A) 5.60 L (B) 2.24 L (C) 3.36 L (D) 1.12 L (E) 4.48 L 2− 2− − 18. 2CrO4 + 3SnO2 + H2O → 2 CrO2

+ 2 MnSO4 + 10 CO2 + 8 H2O

+ 3 SnO32− + 2 OH−

How many moles of MnSO4 are produced when 1.0 mol of KMnO4, 5.0 mol of H2C2O4, and 3.0 mol of H2SO4 are mixed?

How many moles of OH− form when 50.0 mL of 0.100 M CrO42− is added to a flask containing 50.0 mL of 0.100 M SnO22−?

(A) 4.0 mol (B) 5.0 mol (C) 2.0 mol (D) 2.5 mol (E) 1.0 mol

(A) 0.100 mol −3 (B) 6.66 × 10 mol −3 (C) 3.33 × 10 mol −3 (D) 5.00 × 10 mol −3 (E) 7.50 × 10 mol

15. __KClO3 → __KCl + __O2 After the above equation is balanced, how many moles of O2 can be produced from 4.0 mol of KClO3? (A) 2.0 mol (B) 4.0 mol (C) 5.0 mol (D) 6.0 mol (E) 3.0 mol 16. When the following equation is balanced, it is found that 1.00 mol of C8H18 reacts with how many moles of O2? __C8H18 + __ O2 → __ CO2 + __ H2O (A) 1.00 mol (B) 10.0 mol (C) 25.0 mol (D) 37.5 mol (E) 12.5 mol

19. A solution containing 0.20 mol of KBr and 0.20 mol of MgBr2 in 2.0 liters of water is provided. How many moles of Pb(NO3)2 must be added to precipitate all the bromide as insoluble PbBr2? (A) 0.10 mol (B) 0.50 mol (C) 0.60 mol (D) 0.30 mol (E) 0.40 mol


U Answers and Explanations There are multiple “correct” ways to do these calculations. Only one calculation is shown for each answer. 1. D—The reaction is H2SO4 + 2 KOH → K2SO4 + 2 H2O 0.200 mol base 1 mol acid × 1000 mL base 2 mol base 1000 mL acid = 50.0 mL × 0.100 mol acid

50.0 mL base ×

2. C—The reaction is H2C2O4 + 2 NaOH → Na2 C2O4 + 2 H2O 0.1200 mol base 1 mol acid × 2 mol base 1000 mL base 1 1000 mL × × = 0.1356 mL 20.00 mL L

45.20 mL base ×

3. C—Moles acid = (50.0 mL)(0.20 mol acid/1000 mL) = 0.0100 mol Moles base = (50.0 mL)(0.20 mol base/1000 mL) = 0.0100 mol There is sufficient base to react completely with only one of the ionizable hydrogens − from the acid. This leaves H2AsO4 . 2+ 2− 4. A—Ox = oxidizing agent = Cr2O7 ; Red = reducing agent = Fe

0.1000 mol Ox 6 mol Red 1 × × 1000 mL Ox 1 mol Ox 50.00 mL 1000 mL = 0 .5424 M × L

45 .20 mL Ox ×

5. C—The reaction is WO3 + 3 H2 → W + 3 H2O (0.0500 mol WO3)(l mol W/l mol WO3) (183.8 g W/1 mol W) = 9.19 g W 6. D—

63.2% Mn leaves 36.8% O 63.2/54.94 = 1.15 Mn 36.8/16.0 = 2.30 O Thus, there is 1 Mn/2 O.

7. C—V: 2.39/50.94 = 0.0469 O:1.00/16.0 = 0.0625 0.0469/0.0469 = 1 0.0625/0.0469 = 1.33 Multiplying both by three gives: 3 V and 4 O. 8. A—(25.0 g(NH4)2SO4)(l mol(NH4)2SO4/132 g) × (2 mol N/l mol(NH4)2SO4)(14.0 g N/1 mol N) = 5.30 g 9. E— ( 2 N × 14.0 g /N) × 100% = 64% 44.0 g N2O 10. C—[(6 mol H2O)(18 g/mol H2O)]/(250 g Na2SO4 · 6 H2O) × 100% = 43% 11. B—Calculate the moles of acid to compare to the moles of Cu: (10.0 mL)(12 mol/1000 mL) = 0.12 mol The acid is the limiting reactant, and will be used to calculate the moles of NO formed. (0.12 mol acid)(2 mol NO/8 mol acid) = 0.030 mol

Stoichiometry Í 99

12. E—The balanced chemical equation is: 2 Au2O3 → 4 Au + 3 O2 (221 g Au2O3)(l mol Au2O3/442 g Au2O3)(3 mol O2/2 mol Au2O3) = 0.750 mol O2 13. D—The balanced equation is: 4 C4H11N(l) + 27 O2(g) → 16 CO2(g) + 22 H2O(1) + 2 N2(g) 14. E—The KMnO4 is the limiting reagent. Each mole of KMnO4 will produce a mole of MnSO4. 15. D—The balanced equation is: 2 KClO3 → 2 KCl + 3 O2 (4.0 mol KClO3)(3 mol O2/2 mol KCIO3) = 6.0 mol O2 16. E—The balanced equation is: 2 C8H18 + 25 O2 → 16 CO2 + 18 H2O (1.00 mol C8H18)(25 mol O2/2 mol C8H18) = 12.5 mol O2 17. E—(0.200 mol Ca)(l mol H2/l mol Ca)(22.4 L at STP/l mol H2)= 4.48 L −3 2− 2− 18. C—There are 5.00 × 10 mol of CrO4 and an equal number of mol of SnO2 . Thus 2− SnO2 is the limiting reactant (larger coefficient in the balanced reaction). −3 − −3 − 2− 2− (5.00 × 10 mol SnO2 )(2 mol OH /3 mol SnO2 ) = 3.33 × 10 mol OH

19. D—The volume of water is irrelevant. 0.20 mol of KBr will require 0.10 mol of Pb(NO3)2 0.20 mol of MgBr2 will require 0.20 mol of Pb(NO3)2 Total the two yields.

U Free-Response Questions Answer the following questions. You have 15 minutes, and you may use a calculator and the tables in the back of the book. A sample of a monoprotic acid was analyzed. The sample contained 40.0% C and 6.71% H. The remainder of the sample was oxygen. a. Determine the empirical formula of the acid. b. A 0.2720-g sample of the acid was titrated with standard NaOH solution. Determine the molecular weight of the acid if the sample required 45.00 mL of 0.1000 M NaOH for the titration. c. A second sample was placed in a flask. The flask was placed in a hot water bath until the sample vaporized. It was found that 1.18 g of vapor occupied 300.0 mL at 100°C and 1.00 atmospheres. Determine the molecular weight of the acid. d. Using your answer from part a, determine the molecular formula for part b and for part c. e. Account for any differences in the molecular formulas determined in part d.


U Answers and Explanations a. The percent oxygen (53.3%) is determined by subtracting the carbon and the hydrogen from 100%. For C: 40.0/12.01 = 3.33 For H: 6.71/1.008 = 6.66 For O: 53.3/16.00 = 3.33

Divide each of these by the smallest (3.33)

C=l H=2 O=1

This gives the empirical formula: CH2O. You get 1 point for correctly determining any of the elements, and 1 point for getting the complete empirical formula correct. b. Using HA to represent the monoprotic acid, the balanced equation for the titration reaction is: HA + NaOH → NaA + H2O The moles of acid may then be calculated: (45.00 mL NaOH)(0.1000 mol NaOH/1000 mL) (1 mol HA/1 mol NaOH) = −3 4.500 × 10 mol HA The molecular mass is: −3 0.2720 g/4.500 × 10 mol = 60.44 g/mol

You get 1 point for the correct number of moles of HA (or NaOH) and 1 point for the correct final answer. c. This may be done in several ways. One way is to use the ideal gas equation. This will be done here. The equation and the value of R are given in the exam booklet. First find the moles: n = PV /RT

Do not forget, you MUST change to kelvin.

n = (1.00 atm)(300.0 mL)(l L/1000 mL)/(0.0821 L atm/mol K)(373 K) −3 n = 9.80 × 10 mol −3 The molecular mass is: 1.18 g/9.80 × 10 mol = 120 g/mol

You get 1 point for getting any part of the calculation correct and 1 point for getting the correct final answer. d. The approximate formula mass from the empirical (CH2O) formula is: 12 + 2(1) + 16 = 30 g/mol For part b: (60.44 g/mol)/(30 g/mol) = 2 Molecular formula = 2 × Empirical Formula = C2H4O2 For part c: (120 g/mol)/(30 g/mol) = 4 Molecular formula = 4 × Empirical Formula = C4H8O4 You get 1 point for each correct molecular formula. If you got the wrong answer in part a, you can still get credit for one or both of the molecular formulas if you used the part a value correctly.

Stoichiometry Í 101

e. The one formula is double the formula of the other. Thus, the smaller molecule dimerizes to produce the larger molecule. You get 1 point if you “combined” two of the smaller molecules. Total your points. There are 9 points possible.

U Rapid Review G

The mole is the amount of substance that contains the same number of particles as exactly 12 g of carbon-12.

G

Avogadro’s number is the number of particles per mole, 6.022 × 1023 particles.

G

A mole is also the formula (atomic, molecular) mass expressed in grams.

G

G

G

G

G

G

G

G

If you have any one of the three—moles, grams, or particles—you can calculate the others. The empirical formula indicates which elements are present and the lowest whole-number ratio. The molecular formula tells which elements are present and the actual number of each. Be able to calculate the empirical formula from percent composition data or quantities from chemical analysis. Stoichiometry is the calculation of the amount of one substance in a chemical equation by using another one. Always use the balanced chemical equation in reaction stoichiometry problems. Be able to convert from moles of one substance to moles of another, using the stoichiometric ratio derived from the balanced chemical equation. In working problems that involve a quantity other than moles, sooner or later it will be necessary to convert to moles.

G

The limiting reactant is the reactant that is used up first.

G

Be able to calculate the limiting reactant by the use of the mol/coefficient ratio.

G

G

Percent yield is the actual yield (how much was actually formed in the reaction) divided by the theoretical yield (the maximum possible amount of product formed) times 100%. A solution is a homogeneous mixture composed of a solute (species present in smaller amount) and a solvent (species present in larger amount).

G

Molarity is the number of moles of solute per liter of solution.

G

Be able to work reaction stoichiometry problems using molarity.

G

Always use the balanced chemical equation in reaction stoichiometry problems.

CHAPTER

8 Gases

IN THIS CHAPTER Summary: Of the three states of matter—gases, liquids, and solids—gases are probably the best understood and have the best descriptive model. While studying gases in this chapter you will consider four main physical properties—volume, pressure, temperature, and amount—and their interrelationships. These relationships, commonly called gas laws, show up quite often on the AP exam, so you will spend quite a bit of time working problems in this chapter. But before we start looking at the gas laws, let’s look at the Kinetic Molecular Theory of Gases, the extremely useful model that scientists use to represent the gaseous state. Keywords and Equations KEY IDEA

Gas constant, R = 0.0821 L atm mol−1 K−1

r1 M2 = r2 M1 urms = root-mean-square speed r = rate of effusion STP = 0.000°C and 1.000 atm PV = nRT ⎛ n 2a ⎞ ⎜P + 2 ⎟(V − nb ) = nRT ⎝ V ⎠

PA = Ptotal × XA, where XA = Ptotal = PA + PB + PC + . . .

102 U

moles A totalmoles

Gases Í 103

PV PV 1 1 = 2 2 T1 T2

urms =

3kT 3RT = m M

KE per molecule = 1/2 mv2 KE per mole = 3 RT 2 1 atm = 760 mm Hg = 760 torr

n=

m M

Kinetic Molecular Theory KEY IDEA

The Kinetic Molecular Theory attempts to represent the properties of gases by modeling the gas particles themselves at the microscopic level. There are five main postulates of the Kinetic Molecular Theory: 1. Gases are composed of very small particles, either molecules or atoms. 2. The gas particles are tiny in comparison to the distances between them, so we assume that the volume of the gas particles themselves is negligible. 3. These gas particles are in constant motion, moving in straight lines in a random fashion and colliding with each other and the inside walls of the container. The collisions with the inside container walls comprise the pressure of the gas. 4. The gas particles are assumed to neither attract nor repel each other. They may collide with each other, but if they do, the collisions are assumed to be elastic. No kinetic energy is lost, only transferred from one gas molecule to another. 5. The average kinetic energy of the gas is proportional to the Kelvin temperature. A gas that obeys these five postulates is an ideal gas. However, just as there are no ideal students, there are no ideal gases: only gases that approach ideal behavior. We know that real gas particles do occupy a certain finite volume, and we know that there are interactions between real gas particles. These factors cause real gases to deviate a little from the ideal behavior of the Kinetic Molecular Theory. But a non-polar gas at a low pressure and high temperature would come pretty close to ideal behavior. Later in this chapter, we’ll show how to modify our equations to account for non-ideal behavior. Before we leave the Kinetic Molecular Theory (KMT) and start examining the gas law relationships, let’s quantify a couple of the postulates of the KMT. Postulate 3 qualitatively describes the motion of the gas particles. The average velocity of the gas particles is called the root mean square speed and is given the symbol urms. This is a special type of average speed.

104 U Step 4. Review the Knowledge You Need to Score High It is the speed of a gas particle having the average kinetic energy of the gas particles. Mathematically it can be represented as: u rms =

3kT 3RT = m M

where R is the molar gas constant (we’ll talk more about it in the section dealing with the ideal gas equation), T is the Kelvin temperature and M is the molar mass of the gas. These root mean square speeds are very high. Hydrogen gas, H2, at 20°C has a value of approximately 2,000 m/s. Postulate 5 relates the average kinetic energy of the gas particles to the Kelvin temperature. Mathematically we can represent the average kinetic energy per molecule as: KE per molecule = 1/2 mv

2

where m is the mass of the molecule and v is its velocity. The average kinetic energy per mol of gas is represented by: KE per mol = 3/2 RT where R again is the ideal gas constant and T is the Kelvin temperature. This shows the direct relationship between the average kinetic energy of the gas particles and the Kelvin temperature.

Gas Law Relationships The gas laws relate the physical properties of volume, pressure, temperature, and moles (amount) to each other. First we will examine the individual gas law relationships. You will need to know these relations for the AP exam, but the use of the individual equation is not required. Then we will combine the relationships in to a single equation that you will need to be able to apply. But first, we need to describe a few things concerning pressure.

Pressure When we use the word pressure, we may be referring to the pressure of a gas inside a container or to atmospheric pressure, the pressure due to the weight of the atmosphere above us. These two different types of pressure are measured in slightly different ways. Atmospheric pressure is measured using a barometer (Figure 8.1). An evacuated hollow tube sealed at one end is filled with mercury, and then the open end is immersed in a pool of mercury. Gravity will tend to pull the liquid level inside the tube down, while the weight of the atmospheric gases on the surface of the mercury pool will tend to force the liquid up into the tube. These two opposing forces will quickly balance each other, and the column of mercury inside the tube will stabilize. The height of the column of mercury above the surface of the mercury pool is called the atmospheric pressure. At sea level the column averages 760 mm high. This pressure is also called 1 atmosphere (atm). Commonly, the unit torr is used for pressure, where 1 torr = 1 mm Hg, so that atmospheric pressure at sea level equals 760 torr. The SI unit of pressure is the pascal (Pa), so that 1 atm = 760 mm Hg = 760 torr = 101,325 Pa (101.325 kPa). In the United States pounds per square inch (psi) is sometimes used, so that 1 atm = 14.69 psi. To measure the gas pressure inside a container, a manometer (Figure 8.2) is used. As in the barometer, the pressure of the gas is balanced against a column of mercury.

Gases Í 105 Sealed end Vacuum

Mercury

h

Air pressure

Air pressure

Mercury

Figure 8.1

The mercury barometer.

Mercury h

Pgas

Figure 8.2

The manometer.

106 U Step 4. Review the Knowledge You Need to Score High

Volume–Pressure Relationship: Boyle’s Law KEY IDEA

Boyle’s law describes the relationship between the volume and the pressure of a gas when the temperature and amount are constant. If you have a container like the one shown in Figure 8.3 and you decrease the volume of the container, the pressure of the gas increases because the number of collisions of gas particles with the container’s inside walls increases. Mathematically this is an inverse relationship, so the product of the pressure and volume is a constant: PV = kb. If you take a gas at an initial volume (V1) and pressure (P1) (amount and temperature constant) and change the volume (V2) and pressure (P2), you can relate the two sets of conditions to each other by the equation: P1V1 = P2V2 In this mathematical statement of Boyle’s law, if you know any three quantities, you can calculate the fourth.

Volume–Temperature Relationship: Charles’s Law KEY IDEA

KEY IDEA

Charles’s law describes the volume and temperature relationship of a gas when the pressure and amount are constant. If a sample of gas is heated, the volume must increase for the pressure to remain constant. This is shown in Figure 8.4. Remember: In any gas law calculation, you must express the temperature in kelvin. There is a direct relationship between the Kelvin temperature and the volume: as one increases, the other also increases. Mathematically, Charles’s law can be represented as: V/T = kc where kc is a constant and the temperature is expressed in kelvin. Again, if there is a change from one set of volume–temperature conditions to another, Charles’s law can be expressed as: V1/T1 = V2/T2

Figure 8.3

Volume–pressure relationship for gases. As the volume decreases, the number of collisions increase.

Gases Í 107

cool

heat

Room Temperature

Figure 8.4

Volume–temperature relationship for gases.

Pressure–Temperature Relationship: Gay-Lussac’s Law Gay-Lussac’s law describes the relationship between the pressure of a gas and its Kelvin temperature if the volume and amount are held constant. Figure 8.5 represents the process of heating a given amount of gas at a constant volume. As the gas is heated, the particles move with greater kinetic energy, striking the inside walls of the container more often and with greater force. This causes the pressure of the gas to increase. The relationship between the Kelvin temperature and the pressure is a direct one: P/T = kg or

P1/T1 = P2/T2

heat

Figure 8.5 Pressure–temperature relationship for gases. As the temperature increases, the gas particles have greater kinetic energy (longer arrows) and collisions are more frequent and forceful.

Combined Gas Law KEY IDEA

In the discussion of Boyle’s, Charles’s, and Gay-Lussac’s laws we held two of the four variables constant, changed the third, and looked at its effect on the fourth variable. If we keep the number of moles of gas constant—that is, no gas can get in or out—then we can combine these three gas laws into one, the combined gas law, which can be expressed as: (P1V1)/T1 = (P2V2)/T2

KEY IDEA

Again, remember: In any gas law calculation, you must express the temperature in kelvin. In this equation there are six unknowns; given any five, you should be able to solve for the sixth. For example, suppose a 5.0-L bottle of gas with a pressure of 2.50 atm at 20°C is heated to 80°C. We can calculate the new pressure using the combined gas law. Before we start working mathematically, however, let’s do some reasoning. The volume of the bottle hasn’t changed, and neither has the number of moles of gas inside. Only the temperature

108 U Step 4. Review the Knowledge You Need to Score High and pressure have changed, so this is really a Gay-Lussac’s law problem. From Gay-Lussac’s law you know that if you increase the temperature, the pressure should increase if the amount and volume are constant. This means that when you calculate the new pressure, it should be greater than 2.50 atm; if it is less, you’ve made an error. Also, remember that the temperatures must be expressed in kelvin. 20°C = 293 K (K = °C + 273) and 80°C = 353 K. We will be solving for P2, so we will take the combined gas law and rearrange for P2: (T2P1V1)/(T1V2) = P2 Substituting in the values: (353 K)(2.50 atm)(5.0 L)/(293 K)(5.0 L) = P2 3.0 atm = P2 The new pressure is greater than the original pressure, making the answer a reasonable one. Note that all the units canceled except atm, which is the unit that you wanted. Let’s look at a situation in which two conditions change. Suppose a balloon has a volume at sea level of 10.0 L at 760.0 torr and 20°C (293 K). The balloon is released and rises to an altitude where the pressure is 450.0 torr and the temperature is −10°C (263 K). You want to calculate the new volume of the balloon. You know that you have to express the temperature in K in the calculations. It is perfectly fine to leave the pressures in torr. It really doesn’t matter what pressure and volume units you use, as long as they are consistent in the problem. The pressure is decreasing, so that should cause the volume to increase (Boyle’s law). The temperature is decreasing, so that should cause the volume to decrease (Charles’s law). Here you have two competing factors, so it is difficult to predict the end result. You’ll simply have to do the calculations and see. Using the combined gas equation, solve for the new volume (V2): (P1V1)/T1 = (P2V2)/T2 (P1V1T2)/(P2T1) = V2 Now substitute the known quantities into the equation. (You could substitute the knowns into the combined gas equation first, and then solve for the volume. Do it whichever way is easier for you.) (760.0 torr)(10.0 L)(263 K)/(450.0 torr)(293 K) = V2 15.2 L = V2 Note that the units canceled, leaving the desired volume unit of liters. Overall, the volume did increase, so in this case the pressure decrease had a greater effect than the temperature decrease. This seems reasonable, looking at the numbers. There is a relatively small change in the Kelvin temperature (293 K versus 263 K) compared to a much larger change in the pressure (760.0 torr versus 450.0 torr).

Volume–Amount Relationship: Avogadro’s Law KEY IDEA

In all the gas law problems so far, the amount of gas has been constant. But what if the amount changes? That is where Avogadro’s law comes into play. If a container is kept at constant pressure and temperature, and you increase the number of gas particles in that container, the volume will have to increase in order to keep the pressure constant. This means that there is a direct relationship between the volume and the number of moles of gas (n). This is Avogadro’s law and mathematically it looks like this: V/n = ka

or

V1/n1 = V2/n2

Gases Í 109

We could work this into the combined gas law, but more commonly the amount of gas is related to the other physical properties through another relationship that Avogadro developed: 1 mol of any gas occupies 22.4 L at STP [Standard Temperature and Pressure of 0°C (273 K) and 1 atm] The combined gas law and Avogadro’s relationship can then be combined into the ideal gas equation, which incorporates the pressure, volume, temperature, and amount relationships of a gas.

Ideal Gas Equation KEY IDEA

The ideal gas equation has the mathematical form of PV = nRT, where: P = pressure of the gas in atm, torr, mm Hg, Pa, etc. V = volume of the gas in L, mL, etc. n = number of moles of gas R = ideal gas constant: 0.0821 L·atm/K·mol T = Kelvin temperature This is the value for R if the volume is expressed in liters, the pressure in atmospheres, and the temperature in kelvin (naturally). You could calculate another ideal gas constant based on different units of pressure and volume, but the simplest thing to do is to use the 0.0821 and convert the given volume to liters and the pressure to atm. And remember that you must express the temperature in kelvin. Let’s see how we might use the ideal gas equation. Suppose you want to know what volume 20.0 g of hydrogen gas would occupy at 27°C and 0.950 atm. You have the pressure in atm, you can get the temperature in kelvin (27°C + 273 = 300.K), but you will need to convert the grams of hydrogen gas to moles of hydrogen gas before you can use the ideal gas equation. Also, remember that hydrogen gas is diatomic, H2. First you’ll convert the 20.0 g to moles: (20.0 g/l) × (1 mol H2/2.016 g) = 9.921 mol H2 (We’re not worried about significant figures at this point, since this is an intermediate calculation.) Now you can solve the ideal gas equation for the unknown quantity, the volume. PV = nRT V = nRT/P Finally, plug in the numerical values for the different known quantities: V = (9.921 mol)(0.0821 L atm/K mol) (300.K)/0.950 atm V = 257 L

KEY IDEA

Is the answer reasonable? You have almost 10 mol of gas. It would occupy about 224 L at STP (10 mol × 22.4 L/mol) by Avogadro’s relationship. The pressure is slightly less than standard pressure of 1 atm, which would tend to increase the volume (Boyle’s law), and temperature is greater than standard temperature of 0°C, which would also increase the volume (Charles’s law). So you might expect a volume greater than 224 L, and that is exactly what you found. Remember, the final thing you do when working any type of chemistry problem is answer the question: Is the answer reasonable?


Dalton’s Law of Partial Pressures KEY IDEA

Dalton’s law says that in a mixture of gases (A + B + C . . .) the total pressure is simply the sum of the partial pressures (the pressures associated with each individual gas). Mathematically, Dalton’s law looks like this: PTotal = PA + PB + PC + Commonly Dalton’s law is used in calculations involving the collection of a gas over water, as in the displacement of water by oxygen gas. In this situation there is a gas mixture: O2 and water vapor, H2O(g). The total pressure in this case is usually atmospheric pressure, and the partial pressure of the water vapor is determined by looking up the vapor pressure of water at the temperature of the water in a reference book. Simple subtraction generates the partial pressure of the oxygen. If you know how many moles of each gas are in the mixture and the total pressure, you can calculate the partial pressure of each gas by multiplying the total pressure by the mole fraction of each gas: PA = (PTotal)(XA ) where XA = mole fraction of gas A. The mole fraction of gas A would be equal to the moles of gas A divided by the total moles of gas in the mixture.

Graham’s Law of Diffusion and Effusion KEY IDEA

Graham’s law defines the relationship of the speed of gas diffusion (mixing of gases due to their kinetic energy) or effusion (movement of a gas through a tiny opening) and the gases’ molecular mass. The lighter the gas, the faster is its rate of effusion. Normally this is set up as the comparison of the effusion rates of two gases, and the specific mathematical relationship is: r1 M2 = r2 M1 where r1 and r2 are the rates of effusion/diffusion of gases 1 and 2 respectively, and M2 and M1 are the molecular masses of gases 2 and 1 respectively. Note that this is an inverse relationship. For example, suppose you wanted to calculate the ratio of effusion rates for hydrogen and nitrogen gases. Remember that both are diatomic, so the molecular mass of H2 is 2.016 g/mol and the molecular mass of N2 would be 28.02 g/mol. Substituting into the Graham’s law equation: rH MN 2 2 = rN MH 2

2

1/2

r H2/r N2 = (28.02 g/mol/2.016 g/mol)

= (13.899)1/2 = 3.728

Hydrogen gas would effuse through a pinhole 3.728 times as fast as nitrogen gas. The answer is reasonable, since the lower the molecular mass, the faster the gas is moving. Sometimes we measure the effusion rates of a known gas and an unknown gas, and use Graham’s law to calculate the molecular mass of the unknown gas.

Gas Stoichiometry KEY IDEA

The gas law relationships can be used in reaction stoichiometry problems. For example, suppose you have a mixture of KClO3 and NaCl, and you want to determine how many

Gases Í 111

grams of KClO3 are present. You take the mixture and heat it. The KCIO3 decomposes according to the equation: 2 KClO3(s) → 2 KCl(s) + 3 O2(g) The oxygen gas that is formed is collected by displacement of water. It occupies a volume of 542 mL at 27°C. The atmospheric pressure is 755.0 torr. The vapor pressure of water at 27°C is 26.7 torr. First, you need to determine the pressure of just the oxygen gas. It was collected over water, so the total pressure of 755.0 torr is the sum of the partial pressures of the oxygen and the water vapor: PTotal = PO + PH O (Dalton’s law) 2

2

The partial pressure of water vapor at 27°C is 26.7 torr, so the partial pressure of the oxygen can be calculated by: PO = PTotal − PH O = 755.0 torr − 26.7 torr = 728.3 torr 2

2

At this point you have 542 mL of oxygen gas at 728.3 torr and 300. K (27°C + 273). From this data you can use the ideal gas equation to calculate the number of moles of oxygen gas produced: PV = nRT PV /RT = n You will need to convert the pressure from torr to atm: (728.3 torr) × (1 atm/760.0 torr) = 0.9583 atm and express the volume in liters: 542 mL = 0.542 L Now you can substitute the quantities into the ideal gas equation: (0.9583 atm)(0.542 L)/(0.0821 L · atm/K · mol)(300. K) = n 0.02110 mol O2 = n Now you can use the reaction stoichiometry to convert from moles O2 to moles KClO3 and then to grams KClO3: ⎛ 2 mol KClO ⎞ ⎛ 122.55 g KClO ⎞ 3 3 (0.02110 mol O2 ) ⎜ ⎟⎟ = 1.723 g KClO3 ⎟ ⎜⎜ 3 mol O 1 mol KClO ⎝ ⎠⎝ ⎠ 3 2

Non-Ideal Gases We have been considering ideal gases, that is, gases that obey the postulates of the Kinetic Molecular Theory. But remember—a couple of those postulates were on shaky ground. The volume of the gas molecules was negligible, and there were no attractive forces between the gas particles. Many times approximations are fine and the ideal gas equation works well. But it would be nice to have a more accurate model for doing extremely precise work or when a gas exhibits a relatively large attractive force. In 1873, Johannes van der Waals introduced a modification of the ideal gas equation that attempted to take into account the volume and attractive forces of real gases by introducing two constants—a and b—into the ideal gas equation. Van der Waals realized that the actual volume of the gas is less than the ideal gas because gas molecules have a finite volume. He also realized that the more moles of gas present, the greater the real volume. He compensated for the volume of the gas particles mathematically with: corrected volume = V – nb

112 U Step 4. Review the Knowledge You Need to Score High where n is the number of moles of gas and b is a different constant for each gas. The larger the gas particles, the more volume they occupy and the larger the b value. The attraction of the gas particles for each other tends to lessen the pressure of the gas, because the attraction slightly reduces the force of gas particle collisions with the container walls. The amount of attraction depends on the concentration of gas particles and the magnitude of the particles’ intermolecular force. The greater the intermolecular forces of the gas, the higher the attraction is, and the less the real pressure. Van der Waals compensated for the attractive force with: 2 2 corrected pressure = P + an /V where a is a constant for individual gases. The greater the attractive force between the mol2 2 ecules, the larger the value of a. The n /V term corrects for the concentration. Substituting these corrections into the ideal gas equation gives van der Waals equation: 2 2 (P + an /V )(V – nb) = nRT The larger, more concentrated, and stronger the intermolecular forces of the gas, the more deviation from the ideal gas equation one can expect and the more useful the van der Waals equation becomes.


HINT: Make sure the conditions are STP before using 22.4 L/mol.

Gas law experiments generally involve pressure, volume, and temperature measurements. In a few cases, other measurements such as mass and time are necessary. You should remember that ΔP, for example, is NOT a measurement; the initial and final pressure measurements are the actual measurements made in the laboratory. Another common error is the application of gas law type information and calculations for non-gaseous materials. Typical experiments involving these concepts are numbers 3 and 5 in the Experimental chapter. A common consideration is the presence of water vapor, H2O(g). Water generates a vapor pressure, which varies with the temperature. Dalton’s law is used in these cases to adjust the pressure of a gas sample for the presence of water vapor. The total pressure (normally atmospheric pressure) is the pressure of the gas or gases being collected and the water vapor. When the pressure of an individual gas is needed, the vapor pressure of water is subtracted from the total pressure. Finding the vapor pressure of water requires measuring the temperature and using a table showing vapor pressure of water versus temperature. In experiments on Graham’s law, time is measured. The amount of time required for a sample to effuse is the measurement. The amount of material effusing divided by the time elapsed is the rate of effusion. Most gas law experiments use either the combined gas law or the ideal gas equation. Moles of gas are a major factor in many of these experiments. The combined gas law can generate the moles of a gas by adjusting the volume to STP and using Avogadro’s relationship of 22.4 L/mol at STP. The ideal gas equation gives moles from the relationship n = PV/RT. Two common gas law experiments are “Determination of Molar Mass by Vapor Density” and “Determination of the Molar Volume of a Gas.” While it is possible to use the combined gas law (through 22.4 L/mol at STP) for either of these, the ideal gas equation is easier to use. The values for P, V, T, and n must be determined. The temperature may be determined easily using a thermometer. The temperature measurement is normally in °C. The °C must then be converted to a Kelvin temperature (K = °C + 273). Pressure is measured using a barometer. If water vapor is present, a correction is needed in the pressure to compensate for its presence. The vapor pressure of water is found in

Gases Í 113

a table of vapor pressure versus temperature. Subtract the value found in this table from the measured pressure (Dalton’s law). Values from tables are not considered to be measurements for an experiment. If you are going to use 0.0821 L atm/mol K for R, convert the pressure to atmospheres. The value of V may be measured or calculated. A simple measurement of the volume of a container may be made, or a measurement of the volume of displaced water may be required. Calculating the volume requires knowing the number of moles of gas present. No matter how you get the volume, don’t forget to convert it to liters when using PV = nRT or STP. The values of P, T, and V discussed above may be used, through the use of the ideal gas equation, to determine the number of moles present in a gaseous sample. Stoichiometry is the alternate method of determining the number of moles present. A quantity of a substance is converted to a gas. This conversion may be accomplished in a variety of ways. The most common stoichiometric methods are through volatilization or reaction. The volatilization method is the simplest. A weighed quantity (measure the mass) of a substance is converted to moles by using the molar mass (molecular weight). If a reaction is taking place, the quantity of one of the substances must be determined (normally with the mass and molar mass) and then, through the use of the mole-to-mole ratio, this value is converted to moles. The values of P, T, and n may be used to determine the volume of a gas. If this volume is to be used with Avogadro’s law of 22.4 L/mol, the combined gas law must be employed to adjust the volume to STP. This equation will use the measured values for P and T along with the calculated value of V. These values are combined with STP conditions (0°C (273.15 K) and 1.00 atm) to determine the molar volume of a gas. Combining the value of n with the measured mass of a sample will allow you to calculate the molar mass of the gas. Do not forget: Values found in tables and conversions from one unit to another are not experimental measurements.


1. When using any of the gas laws, be sure you are dealing with gases, not liquids or solids. We’ve lost track of how many times we’ve seen people apply gas laws in situations in which no gases were involved. 2. In any of the gas laws, be sure to express the temperature in kelvin. Failure to do so is a quite common mistake. 3. Be sure, especially in stoichiometry problems involving gases, that you are calculating the volume, pressure, etc. of the correct gas. You can avoid this mistake by clearly labeling your quantities (moles of O2 instead of just moles). 4. Make sure your answer is reasonable. Analyze the problem; don’t just write a number down from your calculator. Be sure to check your number of significant figures. 5. If you have a gas at a certain set of volume/temperature/pressure conditions and the conditions change, you will probably use the combined gas equation. If moles of gas are involved, the ideal gas equation will probably be useful. 6. Make sure your units cancel. 7. In using the combined gas equation, make sure you group all initial-condition quantities on one side of the equals sign and all final-condition quantities on the other side. 8. Be sure to use the correct molecular mass for those gases that exist as diatomic molecules—H2, N2, O2, F2, Cl2, and Br2 and I2 vapors. 9. If the value 22.4 L/mol is to be used, make absolutely sure that it is applied to a gas at STP.


U Review Questions You have 25 minutes to do the following questions. You may not use a calculator. You may use the periodic table at the back of the book. For each question, circle the letter of your choice. 1. A sample of argon gas is sealed in a container. The volume of the container is doubled. If the pressure remains constant, what happens to the absolute temperature? (A) It does not change. (B) It is halved. (C) It is doubled. (D) It is squared. (E) It cannot be predicted. 2. A sealed, rigid container is filled with three ideal gases: A, B, and C. The partial pressure of each gas is known. The temperature and volume of the system are known. What additional information is needed to determine the masses of the gases in the container? (A) the average distance traveled between molecular collisions (B) the intermolecular forces (C) the volume of the gas molecules (D) the total pressure (E) the molar masses of the gases 3. Two balloons are at the same temperature and pressure. One contains 14 g of nitrogen and the other contains 20.0 g of argon. Pick the false statement from the following list. (A) The density of the nitrogen sample is less than the density of the argon sample. (B) The average speed of the nitrogen molecules is the same as the average speed of the argon molecules. (C) The average kinetic energy of the nitrogen molecules is the same as the average kinetic energy of the argon molecules. (D) The volume of the nitrogen container is the same as the volume of the argon container. (E) The number of molecules in the nitrogen container is the same as the number of atoms in the argon container.

4. An experiment to determine the molecular mass of a gas begins by heating a solid to produce a gaseous product. The gas passes through a tube and displaces water in an inverted, water-filled bottle. Which of the following necessary items may be determined after the experiment is completed? (A) vapor pressure of water (B) temperature of the displaced water (C) barometric pressure in the room (D) mass of the solid used (E) volume of the displaced water 5. The true volume of a particular real gas is larger than that calculated from the ideal gas equation. This occurs because the ideal gas equation does NOT correct for: (A) the attraction between the molecules (B) the shape of the molecules (C) the volume of the molecules (D) the mass of the molecules (E) the speed the molecules are moving 6. Aluminum metal reacts with HCl to produce aluminum chloride and hydrogen gas. How many grams of aluminum metal must be added to an excess of HCl to produce 33.6 L of hydrogen gas, if the gas is at STP? (A) 18.0 g (B) 35.0 g (C) 27.0 g (D) 4.50 g (E) 9.00 g

Gases Í 115

7. A reaction produces a gaseous mixture of carbon dioxide, carbon monoxide, and water vapor. After one reaction, the mixture was analyzed and found to contain 0.60 mol of carbon dioxide, 0.30 mol of carbon monoxide, and 0.10 mol of water vapor. If the total pressure of the mixture was 0.80 atm, what was the partial pressure of the carbon monoxide? (A) 0.080 atm (B) 0.34 atm (C) 0.13 atm (D) 0.24 atm (E) 0.48 atm 8. A sample of methane gas was collected over water at 35°C. The sample was found to have a total pressure of 756 mm Hg. Determine the partial pressure of the methane gas in the sample (vapor pressure of water at 35°C is 41 mm Hg). (A) 760 mm Hg (B) 41 mm Hg (C) 715 mm Hg (D) 797 mm Hg (E) 756 mm Hg 9. A sample of oxygen gas with a volume of 8.00 L at 127°C and 775 mm Hg is heated until it expands to a volume of 20.00 L. Determine the final temperature of the oxygen gas, if the pressure remains constant. (A) 727°C (B) 318°C (C) 1000°C (D) 160°C (E) 45°C 10. The average kinetic energy of nitrogen molecules changes by what factor when the temperature is increased from 30°C to 60°C? (A) (333 – 303) (B) 2 (C) 1⁄2 (D) 303 − 333 (E) 28

11. A 1.15-mol sample of carbon monoxide gas has a temperature of 27°C and a pressure of 0.300 atm. If the temperature is lowered to 17°C, at constant volume, what would be the new pressure? (A) 0.290 atm (B) 0.519 atm (C) 0.206 atm (D) 0.338 atm (E) 0.310 atm 12. An ideal gas sample weighing 1.28 grams at 127°C and 1.00 atm has a volume of 0.250 L. Determine the molar mass of the gas. (A) 322 g/mol (B) 168 g/mol (C) 0.00621 g/mol (D) 80.5 g/mol (E) 49.4 g/mol 13. Increasing the temperature of an ideal gas from 50°C to 75°C at constant volume will cause which of the following to increase for the gas? I. the average distance between the molecules II. the average speed of the molecules III. the average molecular mass of the gas (A) III only (B) I only (C) II only (D) II and III (E) I and II 14. If a sample of CH4 effuses at a rate of 9.0 mol per hour at 35°C, which of the gases below will effuse at approximately twice the rate under the same conditions? (A) CO (B) He (C) O2 (D) F2 (E) SiH4

116 U Step 4. Review the Knowledge You Need to Score High 15. A steel tank containing argon gas has additional argon gas pumped into it at constant temperature. Which of the following is true for the gas in the tank? (A) There is no change in the number of gas atoms. (B) There is an increase in the volume of the gas. (C) There is a decrease in the pressure exerted by the gas. (D) The gas atoms travel with the same average speed. (E) The gas atoms are separated by a greater average distance. 16. 2 N2O5(s) → 4NO2(g) + O2(g) A 2 L evacuated flask has a 0.2 mol sample of N2O5(s) sealed inside it. The flask is heated to decompose the solid and cooled to 300 K. The N2O5(s) is completely decomposed according to the balanced equation above. What is the nearest value to the final total pressure of the gases in the flask? (The value of the gas constant, R, is 0.082 L −1 −1 atm mol K .) (A) 0.6 atm (B) 6 atm (C) 0.05 atm (D) 1.2 atm (E) 3 atm 17. A glass container is filled, at room temperature, with equal numbers of moles of H2(g), O2(g), and NO2(g). The gases slowly leak out through a pinhole. After some of the gas has effused, which of the following is true of the relative values for the partial pressures of the gases remaining in the container? (A) H2 < NO2 < O2 (B) NO2 < H2 < O2 (C) H2 = NO2 = O2 (D) O2 < NO2 < H2 (E) H2 < O2 < NO2

18. Choose the gas that probably shows the greatest deviation from ideal gas behavior. (A) He (B) O2 (C) SF4 (D) SiH4 (E) Ar 19. Determine the formula for a gaseous silane (SinH2n+2) if it has a density of 5.47 g per L at 0°C and 1.00 atm. (A) SiH4 (B) Si2H6 (C) Si3H8 (D) Si4H10 (E) Si5H12 20. Which of the following best explains why a hotair balloon rises? (A) The heating of the air causes the pressure inside the balloon to increase. (B) The cool outside air pushes the balloon higher. (C) The temperature difference between the inside and outside air causes convection currents. (D) Hot air has a lower density than cold air. (E) Cooler air diffuses more slowly than the warmer air.

Gases Í 117

U Answers and Explanations 1. C—This question relates to the combined gas law: P1V1/T1 = P2V2/T2. Since the pressure remains constant, the pressures may be removed from the combined gas law to produce Charles’s law: V1/T1 = V2/T2. This equation may be rearranged to: T2 = V2T1/V1. The doubling of the volume means V2 = 2 V1. On substituting: T2 = 2V1T1/V1; giving T2 = 2T1. The identity of the gas is irrelevant in this problem. 2. E—This problem depends on the ideal gas equation: PV = nRT. R, V, and T are known, and by using the partial pressure for a gas, the number of moles of that gas may be determined. To convert from moles to mass, the molar mass of the gas is needed. 3. B—Since T and P are known, and since the moles (n) can be determined from the masses given, this question could use the ideal gas equation. The number of moles of each gas is 0.50. Equal moles of gases, at the same T and P, have equal volumes. Equal volume eliminates answer choice D. Equal volume also means that the greater mass has the greater density, eliminating choice A. Equal moles means that the numbers of molecules and atoms are equal, eliminating choice E. The average kinetic energy of a gas depends on the temperature. If the temperatures are the same, then the average kinetic energy is the same, eliminating C. Finally, at the same temperature, heavier gases travel slower than lighter gases. Nitrogen is lighter than argon, so it travels at a faster average speed, making B the correct answer. You may find this reasoning process beneficial on any question in which you do not immediately know the answer.

4. A—This experiment requires the ideal gas equation. The mass of the solid is needed (to convert to moles); this eliminates answer choice D. The volume, temperature, and pressure must also be measured during the experiment, eliminating choices B, C, and E. The measured pressure is the total pressure. Eventually the total pressure must be converted to the partial pressure of the gas using Dalton’s law. The total pressure is the sum of the pressure of the gas plus the vapor pressure of water. The vapor pressure of water can be looked up in a table when the calculations are performed (only the temperature is needed to find the vapor pressure in a table). Answer A is correct. 5. C—Real gases are different from ideal gases because of two basic factors (see the van der Waals equation): molecules have a volume, and molecules attract each other. The molecules’ volume is subtracted from the observed volume for a real gas (giving a smaller volume), and the pressure has a term added to compensate for the attraction of the molecules (correcting for a smaller pressure). Since these are the only two directly related factors, answers B, D, and E are eliminated. The question is asking about volume; thus, the answer is C. You should be careful of “NOT” questions such as this one. 6. C—A balanced chemical equation is needed: 2 Al + 6 HCl → 2 AlCl3 + 3 H2 The reaction produced 33.6L/22.4 L or 1.50 mol at STP. To produce this quantity of hydrogen, (2 mol Al/3 mol H2) × 1.50 moles H2 = 1.00 mol of Al is needed. The atomic weight of Al is 27.0; thus, 27.0 g of Al are required. 7. D—The partial pressure of any gas is equal to its mole fraction times the total pressure. The mole fraction of carbon monoxide is [0.30/(0.60 + 0.30 + 0.10)] = 0.30, and the partial pressure of CO is 0.30 × 0.80 atm = 0.24 atm.

118 U Step 4. Review the Knowledge You Need to Score High 8. C—Using Dalton’s law (PTotal = PA + PB + . . .), the partial pressure may be found by: 756 mm Hg −41 mm Hg = 715 mm Hg. 9. A—The answer may be found using the combined gas law. Removing the constant pressure leaves Charles’s law: V1/T1 = V2/T2. This is rearranged to: T2 = V2T1/V1 = (20.00 L × 400. K)/ (8.00 L) = 1000 K (= 727°C). The other answers result from common errors in this problem. 10. A—The average kinetic energy of the molecules depends on the temperature. The correct answer involves a temperature difference (333 K – 303 K). Do not forget that ALL gas law calculations require Kelvin temperatures. 11. A—You can begin by removing the volume (constant) from the combined gas law to produce Gay-Lussac’s law = P1/T1 = P2/T2. This equation may be rearranged to: P2 = P1T2/T1 = (0.300 atm × 290. K)/(300. K) = 0.290 atm. The moles are not important since they do not change. Some of the other answers result from common errors. 12. B—The molar mass may be obtained by dividing the grams by the number of moles (calculated from the ideal gas equation). Do not forget to convert the temperature to kelvin. 13. C—Choice I requires an increase in volume. Choice II requires an increase in temperature. Choice III requires a change in the composition of the gas. 14. B—Lighter gases effuse faster. The only gas among the choices that is lighter than methane is helium. To calculate the molar mass, you would begin with the molar mass of methane and divide by the rate difference squared: M A = M B ( 1 2 )2 15. D—A steel tank will have a constant volume, and the problem states that the temperature is constant. Adding gas to the tank will increase the number of moles (molecules) of the gas and the pressure (forcing the molecules closer together). A constant temperature means there will be a constant average speed.

16. B—The pressure is calculated using the ideal gas equation. A common mistake is forgetting that 5 mol of gas are produced for every 2 mol of solid reactant. The ideal gas equation is rearranged to P = nRT/V = (5⁄2)(0.2 mol) −1 −1 (0.082 L atm mol K ). (300. K)/(2 L) = 6 atm. 17. E—The lighter the gas, the faster it effuses (escapes). Equal moles of gases in the same container would give equal initial partial pressures. The partial pressures would be reduced relative to the masses of the molecules, with the lightest gas being reduced the most. 18. C—Deviations from ideal behavior depend on the size and the intermolecular forces between the molecules. The greatest deviation would be for a large polar molecule. Sulfur tetrafluoride is the largest molecule, and it is the only polar molecule listed. 19. D—The molar mass of gas must be determined. The simplest method to find the molar mass is: (5.47 g/L) × (22.4 L/mol) = 123 g/mol (simple factor label). The molar mass may also be determined by dividing the mass of the gas by the moles (using 22.4 L/mol for a gas at STP and using 1 L). If you did not recognize the conditions as STP, you could find the moles from the ideal gas equation. The correct answer is the gas with the molar mass closest to 123 g/mol. 20. D—The hot-air balloon rises because it has a lower density than air. Less dense objects will float on more dense objects. In other words “lighter” objects will float on “heavy” objects.

Gases Í 119

U Free-Response Questions First Free-Response Question

You have 20 minutes to do the following question. You may use a calculator and the tables at the back of the book. A hydrogen gas sample is collected over water. The volume of the sample was 190.0 mL at 26°C, and the pressure in the room was 754 mm Hg. The vapor pressure of water at 26°C is 25.2 mm Hg. a. Calculate the number of moles of hydrogen in the sample. b. Calculate how many molecules of water vapor are present in the sample. c. Determine the density (in g/L) of the gas mixture. d. Determine the mole fraction of water. Second Free-Response Question

You have 20 minutes to do the following questions. You may not use a calculator. You may use the tables in the back of the book. A sample containing 2/3 mole of potassium chlorate, KClO3, is heated until it decomposes to potassium chloride and oxygen gas. The oxygen is collected in an inverted bottle through the displacement of water. Answer the following questions using this information. a. Write a balanced chemical equation for the reaction. b. How many moles of oxygen gas are produced? c. The temperature and pressure of the sample are adjusted to STP. The volume of the sample is found to be slightly greater than 22.4 liters. Explain. d. An excess of sulfur is burned in the oxygen. Write a balanced chemical equation and calculate the number of moles of gas formed. e. After the sulfur had completely reacted, a sample of the residual water was removed from the bottle and found to be acidic. Explain.

U Answers and Explanations First Free-Response Question

a. Ptotal = 754 mm Hg Phydrogen = 754 – 25.2 = 729 mm Hg P = 729 mm Hg/760 mm Hg = 0.959 atm V = 190.0 mL = 0.1900 L T = 26°C = 299 K −1 −1 R = 0.0821 L atm mol K n = PV/RT −1 −1 = (0.959 atm × 0.1900 L)/(0.0821 L atm mol K × 299 K) = 0.00742 mol H2 Give yourself 1 point for the correct answer (no deduction for rounding differently). You must include all parts of the calculation (including “=”).

120 U Step 4. Review the Knowledge You Need to Score High Give yourself 1 point for the correct equation, or for any other correct calculation. Do not give yourself more than 2 points total for this part. b. Pwater = 25.2 mm Hg/760 mm Hg = 0.0332 atm. T and V are the same as in part a. 23 −1 Avogadro’s number = 6.022 × 10 molecules mol = N n = PV /RT −1 −1 = (0.0332 atm × 0.1900 L)/(0.0821 L atm mol K × 299 K) −4 = 2.57 × 10 mol H2O) −4 23 −1 molecules = (2.57 × 10 mol) × (6.022 × 10 molecules mol ) 20 = 1.55 × 10 molecules Give yourself 1 point for the correct answer (no deduction for rounding differently). You must include all parts of the calculation (including “=”). Give yourself 1 point for the correct equation, or for any other correct calculation. Do not give yourself more than 2 points total for this part. c. (0.00742 mol H2) × (2.016 g H2/mol H2) = 0.0150 g H2 (2.57 × 10−4 mol H2O) × (18.02 g H2O/mol H2O) = 0.00463 g H2O total mass = 0.0150 g H2 + 0.00463 g H2O = 0.0196 g density = 0.0196 g/0.1900 L = 0.103 g/L Give yourself 1 point for the correct answer (no deduction for rounding differently). You must include all parts of the calculation (including “=”). Give yourself 1 point for the correct equation, or for any other correct calculation. Do not give yourself more than 2 points total for this part. −4 d. 0.00742 mol H2 and 2.57 × 10 mol H2O −4 total moles = (0.00742 + 2.57 × 10 ) = 0.00768 mol −4 Mole fraction H2O = (2.57 × 10 mol H2O)/(0.00768 mol) = 0.0335

Give yourself 1 point for the correct answer (no deduction for rounding differently). You must include all parts of the calculation (including “=”). Give yourself 1 point for the correct equation, or for any other correct calculation. Do not give yourself more than 2 points total for this part. Total score = sum of parts a–d. If any of the final answers has the incorrect number of significant figures, subtract one point. Second Free-Response Question

a. 2 KClO3(s) → 2 KCl(s) + 3 O2(g) You get 1 point if you have the above equation. b. (2/3 mole KClO3) (3 moles O2/2 moles KClO3) = 1 mole O2 You get 1 point for the correct answer and 1 point for the work. You can get these points if you correctly use information from an incorrect equation in part a. c. At STP the volume of 1 mole of O2 should be 22.4 liters. The volume is greater because oxygen was not the only gas in the sample. Water vapor was present. The presence of the additional gas leads to a larger volume. You get 1 point for discussing STP and 22.4 liters, and 1 point for discussing the presence of water vapor. d. There are two acceptable equations; either will get you 1 point. You do not need both equations.

Gases Í 121

S(s) + O2(g)→ SO2(g) 2 S(s) + 3 O2(g) → 2 SO3(g) If you chose the first equation, the moles of gas produced would be: (1 mole O2) (1 mole SO2/1 mole O2) = 1 mole SO2 If you chose the second equation, the moles of gas produced would be: (1 mole O2) (2 mole SO3/3 mole O2) = 2/3 mole SO2 You get 1 point for either of these solutions. You will also get 1 point if you used an incorrect number of moles of O2 from a wrong answer for part b. e. Either of the possible sulfur oxides will dissolve in water to produce an acid. This will get you 1 point, as will a similar comment and either of the following equations: SO2 + H2O → H2SO3 SO3 + H2O → H2SO4 Total your points for the different parts. There are 8 points possible.

U Rapid Review G

G

G

G

G

G

G

G

G

G

Kinetic Molecular Theory—Gases are small particles of negligible volume moving in a random straight-line motion, colliding with the container walls (that is the gas pressure) and with each other. During these collisions no energy is lost, but energy may be transferred from one particle to another; the Kelvin temperature is proportional to the average kinetic energy. There is assumed to be no attraction between the particles. Pressure—Know how a barometer operates and the different units used in atmospheric pressure. Boyle’s law—The volume and pressure of a gas are inversely proportional if the temperature and amount are constant. Charles’s law—The volume and temperature of a gas are directly proportional if the amount and pressure are constant. Gay-Lussac’s law—The pressure and temperature of a gas are directly proportional if the amount and volume are constant. Combined gas law—Know how to use the combined gas equation P1V1/T1 = P2V2/T2. Avogadro’s law—The number of moles and volume of a gas are directly proportional if the pressure and temperature are constant. Remember that 1 mol of an ideal gas at STP(1 atm & 0°C) occupies a volume of 22.4 L. Ideal gas equation—Know how to use the ideal gas equation PV = nRT. Dalton’s law—The sum of the partial pressures of the individual gases in a gas mixture is equal to the total pressure: PTotal = PA + PB + Pc + . . . Graham’s law—The lower the molecular mass of a gas, the faster it will effuse/diffuse. r M2 Know how to use Graham’s law: 1 = . r2 M1

122 U Step 4. Review the Knowledge You Need to Score High G

G

G

Gas stoichiometry—Know how to apply the gas laws to reaction stoichiometry problems. Non-ideal gases—Know how the van der Waals equation accounts for the non-ideal behavior of real gases. Tips—Make sure the temperature is in kelvin; gas laws are being applied to gases only; the units cancel; and the answer is reasonable.

CHAPTER

9

Thermodynamics IN THIS CHAPTER: Summary: Thermodynamics is the study of heat and its transformations. Thermochemistry is the part of thermodynamics that deals with changes in heat that take place during chemical processes. We will be describing energy changes in this chapter. Energy can be of two types: kinetic or potential. Kinetic energy is energy of motion, while potential energy is stored energy. Energy can be converted from one form to another but, unless a nuclear reaction occurs, energy cannot be created or destroyed (Law of Conservation of Energy). We will discuss energy exchanges between a system and the surroundings. The system is that part of the universe that we are studying. It may be a beaker or it may be Earth. The surroundings are the rest of the universe. The most common units of energy used in the study of thermodynamics are the joule and the calorie. The joule (J) is defined as:

1 J = 1 kg m2/s2 The calorie was originally defined as the amount of energy needed to raise the temperature of 1 g of water 1°C. Now it is defined in terms of its relationship to the joule:

1 cal = 4.184 J KEY IDEA

It is important to realize that this is not the same calorie that is commonly associated with food and diets. That is the nutritional Calorie, Cal, which is really a kilocalorie (1 Cal = 1000 cal). Keywords and Equations

KEY IDEA

S ° = standard entropy H ° = standard enthalpy G° = standard free energy q = heat c = specific heat capacity Cp = molar heat capacity at constant pressure ΔS ° = Σ S ° products − Σ S ° reactants

Í 123

124 U Step 4. Review the Knowledge You Need to Score High ΔH ° = Σ ΔHf ° products − Σ ΔHf° reactants ΔG° = Σ ΔGf° products − Σ ΔGf° reactants ΔG° = ΔH ° − TΔS ° = −RT In K = −2.303 RT log K = −n F E ° ΔG = ΔG° + RT ln Q = ΔG° + 2.303 RT log Q q = mc ΔT

Cp =

ΔH ΔT

Gas constant, R = 8.31 J mol–1 K–1

Calorimetry Calorimetry is the laboratory technique used to measure the heat released or absorbed during a chemical or physical change. The quantity of heat absorbed or released during a chemical or physical change is represented as q and is proportional to the change in temperature of the system being studied. This system has what is called a heat capacity (Cp), which is the quantity of heat needed to change the temperature 1 K. It has the form: Cp = heat capacity = q/ΔT Heat capacity most commonly has units of J/K. The specific heat capacity (or specific heat) (c) is the quantity of heat needed to raise the temperature of 1 g of a substance 1 K: c = q/(m × ΔT ) or q = cmΔT, where m is the mass of the substance. The specific heat capacity commonly has units of J/g.K. Because of the original definition of the calorie, the specific heat capacity of water is 4.184 J/g.K. If the specific heat capacity, the mass, and the change of temperature are all known, the amount of energy absorbed can easily be calculated. Another related quantity is the molar heat capacity (C ), the amount of heat needed to change the temperature of 1 mol of a substance by 1 K. Calorimetry involves the use of a laboratory instrument called a calorimeter. Two types of calorimeter, a simple coffee-cup calorimeter and a more sophisticated bomb calorimeter, are shown in Figure 9.1. In both, a process is carried out with known amounts of substances and the change in temperature is measured. The coffee-cup calorimeter can be used to measure the heat changes in reactions or processes that are open to the atmosphere: qp, constant-pressure reactions. These might be reactions that occur in open beakers and the like. This type of calorimeter is also commonly used to measure the specific heats of solids. A known mass of solid is heated to a certain temperature and then is added to the calorimeter containing a known mass of water at a known temperature. The final temperarure is then measured allowing us to calculate the ΔT. We know that the heat lost by the solid (the system) is equal to the heat gained by the surroundings (the water and calorimeter, although for simple coffee-cup calorimetry the heat gained by the calorimeter is small and is ignored): −qsolid = qwater

Thermodynamics Í 125 Electrical source

Stirrer

+ –

Thermometer Thermometer

Stirrer

Polystrene cups

Water

Water bath

Sample Ignition coil

(a) Coffee-cup calorimeter (constant pressure)

(b) Bomb calorimeter (constant volume)

Figure 9.1

Two types of calorimeters.

Substituting the mathematical relationship for q gives: −(csolid × msolid × ΔTsolid) = cwater × mwater × ΔTwater This equation can then be solved for the specific heat capacity of the solid. The constant-volume bomb calorimeter is used to measure the energy changes that occur during combustion reactions. A weighed sample of the substance being investigated is placed in the calorimeter, and compressed oxygen is added. The sample is ignited by a hot wire, and the temperature change of the calorimeter and a known mass of water is measured. The heat capacity of the calorimeter/water system is sometimes known. For example, a 1.5886 g sample of glucose (C6H12O6) was ignited in a bomb calorimeter. The temperature increased by 3.682°C. The heat capacity of the calorimeter was 3.562 kJ/°C, and the calorimeter contained 1.000 kg of water. Find the molar heat of reaction (i.e., kJ/mole) for: C6H12O6(s) + 6 O2(g) → 6 CO2(g) + 6 H2O(l) Answer: (3.562 kJ) (3.682°C)=13.12 kJ (°C) ⎛ 1000 g ⎞ ⎛ 4.184 J ⎞ ⎛ 1 kJ ⎞ (1.000 kg) ⎜ ⎟⎜ ⎟⎜ ⎟ (3.682°C) = 15.40 kJ ⎝ 1kg ⎠ ⎝ g°C ⎠ ⎝ 1000 J ⎠ total heat = 13.12 kJ + 15.40 kJ = 28.52 kJ Note: The temperature increased so the reaction was exothermic (−) → −28.52 kJ

126 U Step 4. Review the Knowledge You Need to Score High This is not molar (yet) (1.5886 g)

(1mol) = 8.8177 × 10−3 mol (180.16 g)

Thus: −28.52 kJ = −3234 kJ/mol 8.8177 × 10− 3 mol

Laws of Thermodynamics The First Law of Thermodynamics states that the total energy of the universe is constant. This is simply the Law of Conservation of Energy. This can be mathematically stated as: ΔEuniverse = ΔEsystem + ΔEsurroundings = 0 The Second Law of Thermodynamics involves a term called entropy. Entropy (S ) is related to the disorder of a system. The Second Law of Thermodynamics states that all processes that occur spontaneously move in the direction of an increase in entropy of the universe (system + surroundings). Mathematically, this can be stated as: ΔSuniverse = ΔSsystem + ΔSsurroundings > 0

for a spontaneous process

For a reversible process ΔSuniverse = 0. The qualitative entropy change (increase or decrease of entropy) for a system can sometimes be determined using a few simple rules: 1. 2. 3. 4.

Entropy increases when the number of molecules increases during a reaction. Entropy increases with an increase in temperature. Entropy increases when a gas is formed from a liquid or solid. Entropy increases when a liquid is formed from a solid. Let us now look at some applications of these first two laws of thermodynamics.

Products Minus Reactants Enthalpies KEY IDEA

Many of the reactions that chemists study are reactions that occur at constant pressure. During the discussion of the coffee-cup calorimeter, the heat change at constant temperature was defined as qp. Because this constant-pressure situation is so common in chemistry, a special thermodynamic term is used to describe this energy: enthalpy. The enthalpy change, ΔH, is equal to the heat gained or lost by the system under constant-pressure conditions. The following sign conventions apply: If ΔH > 0 the reaction is endothermic If ΔH < 0 the reaction is exothermic If a reaction is involved, ΔH is sometimes called ΔHreaction. ΔH is often given in association with a particular reaction. For example, the enthalpy change associated with the formation of water from hydrogen and oxygen gases can be shown in this fashion: 2 H2(g) + O2(g) → 2 H2O(g)

ΔH = −483.6 kJ

The negative sign indicates that this reaction is exothermic. This value of ΔH is for the production of 2 mol of water. If 4 mol were produced, ΔH would be twice −483.6 kJ. The techniques developed in working reaction stoichiometry problems (see the Stoichiometry chapter) also apply here.

Thermodynamics Í 127

If the reaction above for the formation of water were reversed, the sign of ΔH would be reversed. That would indicate that it would take 483.6 kJ of energy to decompose 2 mol of water. This would then become an endothermic process. ΔH is dependent upon the state of matter. The enthalpy change would be different for the formation of liquid water instead of gaseous water. ΔH can also indicate whether a reaction will be spontaneous. A negative (exothermic) value of ΔH is associated with a spontaneous reaction. However, in many reactions this is not the case. There is another factor to consider in predicting a reaction’s spontaneity. We will cover this other factor a little later in this chapter. Enthalpies of reaction can be measured using a calorimeter. However, they can also be calculated in other ways. Hess’s law states that if a reaction occurs in a series of steps, then the enthalpy change for the overall reaction is simply the sum of the enthalpy changes of the individual steps. If, in adding the equations of the steps together, it is necessary to reverse one of the given reactions, then the sign of ΔH must also be reversed. Also, particular attention must be used if the reaction stoichiometry has to be adjusted. The value of an individual ΔH may need to be adjusted. It doesn’t matter whether the steps used are the actual steps in the mechanism of the reaction because ΔHreaction (ΔHrxn) is a state function, a function that doesn’t depend on the pathway, but only on the initial and final states. Let’s see how Hess’s law can be applied, given the following information: C(s) + O2(g) → CO2(g)

ΔH = −393.5 kJ

H2(g) + (1/2)O2 (g) → H2O(1)

ΔH = −285.8 kJ

C2H2(g) + (5/2)O2(g) → 2 CO2(g) + H2O(1)

ΔH = −1299.8 kJ

find the enthalpy change for: 2C(s) + H2(g) → C2H2(g) Answer: 2[C(s) + O2(g)→ CO2(g)] H2(g) + (1/2) O2(g) → H2O(1) 2 CO2(g) + H2O(1) → C2H2(g) + (5/2) O2(g) 2C(s) + H2(g) → C2H2(g)

KEY IDEA

2 (−393.5 kJ) −285.8 kJ −(−1299.8 kJ) 227.0 kJ

Enthalpies of reaction can also be calculated from individual enthalpies of formation (or heats of formation), ΔHf , for the reactants and products. Because the temperature, pressure, and state of the substance will cause these enthalpies to vary, it is common to use a standard state convention. For gases, the standard state is 1 atm pressure. For a substance in an aqueous solution, the standard state is 1 molar concentration. And for a pure substance (compound or element), the standard state is the most stable form at 1 atm pressure and 25°C. A degree symbol to the right of the H indicates a standard state, ΔH °. The standard enthalpy of formation of a substance (ΔHf°) is the change in enthalpy when 1 mol of the substance is formed from its elements when all substances are in their standard states. These values are then tabulated and can be used in determining ΔH °rxn. ΔHf° of an element in its standard state is zero. ΔHf°rxn can be determined from the tabulated ΔHf° of the individual reactants and products. It is the sum of the ΔHf° of the products minus the sum of the ΔHf° of the reactants: ΔH °rxn = Σ ΔHf° products − Σ ΔHf° reactants

128 U Step 4. Review the Knowledge You Need to Score High In using this equation be sure to consider the number of moles of each, because ΔHf° for the individual compounds refer to the formation of 1 mol. For example, let’s use standard enthalpies of formation to calculate ΔHrxn for: 6 H2O(g) + 4 NO(g)→ 5 O2(g) + 4 NH3(g) Answer: Δ H rxn = {5[ Δ H f ° O2 ( g )]+ 4[ Δ H f ° NH3 ( g )]} −{[6Δ H f ° H 2O(g)]+ 4[ΔH f ° NO(g)]} Using tabulated standard enthalpies of formation gives: ΔHrxn = [5(0.00 kJ) + 4(−46.19 kJ)] − [6(−241.85 kJ) + 4(90.37)] = 904.68 kJ

TIP

People commonly forget to subtract all the reactants from the products. The values of ΔHf° will be given to you on the AP exam, or you will be asked to stop before putting the numbers into the problem. An alternative means of estimating the heat of reaction is to take the sum of the average bond energies of the reactant molecules and subtract the sum of the average bond energies of the product molecules.

Entropies In much the same way as ΔH ° was determined, the standard molar entropies (S °) of elements and compounds can be tabulated. The standard molar entropy is the entropy associated with 1 mol of a substance in its standard state. Entropies are also tabulated, but unlike enthalpies, the entropies of elements are not zero. For a reaction, the standard entropy change is calculated in the same way as the enthalpies of reaction: ΔS ° = Σ S ° products −Σ S ° reactants Calculate ΔS ° for the following. If you do not have a table of S ° values, just set up the problems. TIP

Note: These are thermochemical equations, so fractions are allowed. a. H2(g) + 1⁄2 O2(g) → H2O(g) b. H2(g) + 1⁄2 O2(g) → H2O(l) c. CaCO3(s) + H2SO4(l) → CaSO4(s) + H2O(g) + CO2(g) Answers: a. H2O

H2

O2

188.7 J/mol K − [131.0 + 1/2(205.0)]J/mol K = −44.8 J/mol K b. H2O

H2

O2

69.9 J/mol K − [131.0 + 1/2(205.0)]J/mol K = −163.6 J/mol K


c. CaSO4 [107

H2O +

188.7

CO2 +

213.6]

CaCO3 −

[92.9

H2SO4 +

157] J/mol K

= 259 J/mol K. One of the goals of chemists is to be able to predict whether or not a reaction will be spontaneous. Some general guidelines for a spontaneous reaction have already been presented (negative ΔH and positive ΔS ), but neither is a reliable predictor by itself. Temperature also plays a part. A thermodynamic factor that takes into account the entropy, enthalpy, and temperature of the reaction should be the best indicator of spontaneity. This factor is called the Gibbs free energy.

Gibbs Free Energy The Gibbs free energy (G ) is a thermodynamic function that combines the enthalpy, entropy, and temperature: G = H − TS, where T is the Kelvin temperature Like most thermodynamic functions, only the change in Gibbs free energy can be measured, so the relationship becomes: ΔG = ΔH − T ΔS ΔG is the best indicator chemists have as to whether or not a reaction is spontaneous: G

G

KEY IDEA

G

If ΔG > 0, the reaction is not spontaneous; energy must be supplied to cause the reaction to occur. If ΔG < 0, the reaction is spontaneous. If ΔG = 0, the reaction is at equilibrium.

If there is a ΔG associated with a reaction and that reaction is then reversed, the sign of ΔG changes. Just like with the enthalpy and entropy, the standard Gibbs free energy change, (ΔG °), is calculated: ΔG ° = Σ ΔGf° products − Σ ΔGf° reactants ΔGf° of an element in its standard state is zero. ΔG ° for a reaction may also be calculated by using the standard enthalpy and standard entropy of reaction: ΔG ° = ΔH °rxn − T ΔS °rxn Calculate ΔG ° for: (If you do not have a table of ΔG ° values, just set up the problems.) a. 2 NH4Cl(s) + CaO(s) → CaCl2(s) + H2O(l) + 2 NH3(g) b. C2H4(g) + H2O(g) → C2H5OH(l) c. Ca(s) + 2 H2SO4(l) → CaSO4(s) + SO2(g) + 2 H2O(l) Answers: a. CaCl2(s) −750.2

H2O(l)

NH3(g)

NH4Cl(s)

−237.2

−16.6

−203.9

CaO(s) −604.2 kJ/mol

130 U Step 4. Review the Knowledge You Need to Score High [−750.2 + (−237.2) + 2(−16.6)] − [2(−203.9) + (−604.2)] = −8.6 kJ/mole b. C2H5OH(l) −174.18

C2H4(g)

H2O(g)

68.12

−228.6

−174.18 − [68.12 + (−228.6)] = −13.7 kJ/mol c. CaSO4(s) −1320.3

SO2(g)

H2O(l)

Ca(s)

−300.4

−237.2

0.0

H2SO4(l) −689.9 kJ/mol

[(−1320.3) + (−300.4) + 2(−237.2)] − [(0.0) + 2(−689.9)] = −715.3 kJ/mol

Thermodynamics and Equilibrium Thus far, we have considered only situations under standard conditions. But how do we cope with nonstandard conditions? The change in Gibbs free energy under nonstandard conditions is: ΔG = ΔG° + RT ln Q = ΔG ° + 2.303 log Q Q is the activity quotient, products over reactants. This equation allows the calculation of ΔG in those situations in which the concentrations or pressures are not 1. Using the previous concept, calculate ΔG for the following at 500 . K: 2 NO(g) + O2(g) → 2 NO2(g) 2.00 M

0.500 M

1.00 M

(Assume ΔGf° = ΔGf ΔGf°

(86.71

0.000

500

)

51.84) kJ/mol

ΔGrxn = 2(51.84) − [2(86.71) + 0.000] = −69.74 kJ/mol ΔG Q=

500

= ΔGrxn + RT ln Q

[ NO2 ]2 [ NO]2 [O2 ]

⎛ ⎞ (1.00)2 = (− 69 .74 kJ)(1000 J/kJ) + ⎜8.314 J ⎟(500. K )ln ⎝ ( 2 .00)2 (0 .500) mol K ⎠ = − 7 .262 ×10 4 J/mol Note that Q, when at equilibrium, becomes K. This equation gives us a way to calculate the equilibrium constant, K, from a knowledge of the standard Gibbs free energy of the reaction and the temperature. If the system is at equilibrium, then ΔG = 0 and the equation above becomes: ΔG ° = −RT ln K = −2.303 RT log K For example, calculate ΔG ° for: 2 O3 ( g ) 3O2 ( g ) K p = 4 .17 ×1014


Note: ° = 298 K Answer: ΔG ° = −RT ln K −(8.314 J) = ( 298K )ln 4 .17 ×1014 ( molK) = − 8 .3 4 ×10 4 J/mol


KEY IDEA

The most common thermodynamic experiment is a calorimetry experiment such as experiment 13 in Experimental chapter. In this experiment the heat of transition or heat of reaction is determined. The experiment will require a balance to determine the mass of a sample and possibly a pipet to measure a volume, from which a mass may be calculated using the density. A calorimeter, usually a polystyrene (Styrofoam) cup, is needed to contain the reaction. Finally, a thermometer is required. Tables of heat capacities or specific heats may be provided. Mass and possible volume measurements, along with the initial and final temperatures, are needed. Remember: you measure the initial and final temperature so you can calculate the change in temperature. After the temperature change is calculated, there are several ways to proceed. If the calorimeter contains water, the heat may be calculated by multiplying the specific heat of water by the mass of water by the temperature change. The heat capacity of the calorimeter may be calculated by dividing the heat by the temperature change. If a reaction is carried out in the same calorimeter, the heat from that reaction is the difference between the heat with and without a reaction. Do not forget, if the temperature increases, the process is exothermic and the heat has a negative sign. The opposite is true if the temperature drops.


1. Be sure your units cancel giving you the unit desired in the final answer. 2. Check your significant figures. 3. Don’t mix energy units, joules, and calories. 4. Watch your signs in all the thermodynamic calculations. They are extremely important. 5. Don’t confuse enthalpy, ΔH, and entropy, ΔS. 6. Pay close attention to the state of matter for your reactants and products, and choose the corresponding value for use in your calculated entropies and enthalpies. 7. Remember: products minus reactants. 8. ΔHf and ΔGf are for 1 mol of substance. Use appropriate multipliers if needed. 9. ΔGf and ΔHf for an element in its standard state are zero. 10. All temperatures are in kelvin. 11. When using ΔG ° = ΔH °rxn − T ΔS °rxn, pay particular attention to your enthalpy and entropy units. Commonly, enthalpies will use kJ and entropies J.


U Review Questions Answer the following questions. You have 20 minutes. You may not use a calculator. You may use the periodic table at the back of the book. Choose the type of energy that best relates to questions 1–4. (A) (B) (C) (D) (E)

free energy lattice energy kinetic energy activation energy ionization energy

1. the minimum energy required to initiate a reaction 2. the minimum energy required for a nonspontaneous reaction 3. The average_____________is the same for any ideal gas at a given temperature. 4. the energy released when the gaseous ions combine to form an ionic solid 5. Given the following information: C(s) + O2(g) → CO2(g) ΔH = −393.5 kJ H2(g) + (l/2) O2(g) → H2O(l)

ΔH = −285.8 kJ

C2H2(g) + (5/2) O2(g) → 2 CO2(g) + H2O(l) ΔH = −1299.8 kJ find the enthalpy change for: 2C(s) + H2(g) → C2H2(g) (A) (B) (C) (D) (E)

454.0 kJ −227.0 kJ 0.0 kJ 227.0 kJ −454.0 kJ

6. A sample of gallium metal is sealed inside a wellinsulated, rigid container. The temperature inside the container is at the melting point of gallium metal. What can be said about the energy and the entropy of the system? Assume the insulation prevents any energy change with the surroundings. (A) The total energy increases. The total entropy will increase. (B) The total energy is constant. The total entropy is constant. (C) The total energy is constant. The total entropy will decrease. (D) The total energy is constant. The total entropy will increase. (E) The total energy decreases. The total entropy will decrease. 7. When ammonium chloride dissolves in water, the temperature drops. Which of the following conclusions may be related to this? (A) The hydration energies of the ions are very high. (B) Ammonium chloride produces an ideal solution in water. (C) The heat of solution for ammonium chloride is exothermic. (D) Ammonium chloride has a low lattice energy. (E) Ammonium chloride is more soluble in hot water. 8. Choose the reaction expected to have the greatest increase in entropy. (A) (B) (C) (D) (E)

H2O(g) → H2O(1) C(s) + O2(g) → CO2(g) Ca(s) + H2(g) → CaH2(s) N2(g) + 3H2(g) → 2 NH3(g) 2 KClO3(s) → 2 KCl(s) + 3 O2(g)


9. Under standard conditions calcium metal reacts readily with chlorine gas. What conclusions may be drawn from this fact? (A) (B) (C) (D) (E)

Keq < 1 and ΔG ° > 0 Keq > 1 and ΔG ° = 0 Keq < 1 and ΔG ° < 0 Keq > 1 and ΔG ° < 0 Keq > 1 and ΔG ° > 0

ΔH > 0 and ΔS > 0 ΔH = 0 and ΔS > 0 ΔH > 0 and ΔS < 0 ΔH < 0 and ΔS < 0 ΔH < 0 and ΔS > 0

(A) (B) (C) (D) (E)

ionization energy kinetic energy activation energy lattice energy free energy

15. Which of the following reactions would be accompanied by the greatest decrease in entropy?

11. Which of the following reactions have a negative entropy change? I. 2 H2(g) + O2(g) → 2 H2O(l) II. 2 NH3(g) → N2(g) + 3 H2(g) III. Ca(s) + Cl2(g) → CaCl2(s)

(A) (B) (C) (D) (E)

N2(g) + 3 H2(g) → 2 NH3(g) C(s) + O2(g) → CO2(g) 2 H2(g) + O2(g) → 2 H2O(g) 2 Na(s) + Cl2(g) → 2 NaCl(s) 2 KClO3(s) → 2 KCl(s) + 3 O2(g)

16. CO(g) + 2 H2(g) → CH3OH(g) ΔH = −91kJ Determine ΔH for the above reaction if CH3OH(l) were formed in the above reaction instead of CH3OH(g). The ΔH of vaporization for CH3OH is 37 kJ/mol.

(A) II only (B) I only (C) I, II, and III (D) III only (E) I and III 12. A certain reaction is non-spontaneous under standard conditions, but becomes spontaneous at higher temperatures. What conclusions may be drawn under standard conditions? (A) (B) (C) (D) (E)

0 kJ 485 kJ −485 kJ 464 kJ 443 kJ

14. What is the energy required to convert a gaseous atom, in the ground state, to a gaseous cation?

10. Which of the following combinations is true when sodium chloride melts? (A) (B) (C) (D) (E)

(A) (B) (C) (D) (E)

ΔH < 0, ΔS > 0, and ΔG > 0 ΔH > 0, ΔS < 0, and ΔG > 0 ΔH > 0, ΔS > 0, and ΔG > 0 ΔH < 0, ΔS < 0, and ΔG > 0 ΔH > 0, ΔS > 0, and ΔG = 0

13. 2 H2(g) + O2(g) → 2 H2O(g) From the table below, determine the enthalpy change for the above reaction.

BOND

AVERAGE BOND ENERGY (kJ/mol)

H–H

436

O=O

499

H–O

464

(A) (B) (C) (D) (E)

−128 kJ −54 kJ +128 kJ +54 kJ −37 kJ

17. A solution is prepared by dissolving solid ammonium nitrate, NH4NO3, in water. The initial temperature of the water was 25°C, but after the solid had dissolved, the temperature had fallen to 20°C. What conclusions may be made about ΔH and ΔS? (A) (B) (C) (D) (E)

ΔH < 0 ΔH > 0 ΔH > 0 ΔH < 0 ΔH = 0

ΔS > 0 ΔS > 0 ΔS < 0 ΔS < 0 ΔS > 0


U Answers and Explanations 1. D—You may wish to review the Kinetics chapter if you have forgotten what the activation energy is.

greatest increase in the number of moles of liquid would yield the greatest increase.

2. A—The free energy is the minimum energy required for a non-spontaneous reaction and the maximum energy available for a spontaneous reaction.

9. D—If the reaction occurs readily, it must be spontaneous. Spontaneous reactions require ΔG° < 0. A negative free energy leads to a large K (> 1).

3. C—This is a basic postulate of kinetic molecular theory. 4. B—This is the reverse of the lattice energy definition. 5. D 2[C(s) + O2(g) → CO2(g)]

2(−393.5 kJ)

10. A—Heat is required to melt something (ΔH > 0). A transformation from a solid to a liquid gives an increase in entropy (ΔS ). 11. E—Equations I and III both have an overall decrease in the amount of gas (high entropy) present. Equation II produces more gas (increases entropy). 12. C—Nonspontaneous → ΔG > 0

H2(g) + (1/2) O2(g) → H2O(l) −285.8 kJ 2 CO2(g) + H2O(l) → C2H2(g) + (5/2) O2(g)

−(−1299.8 kJ)

2 C(s) + H2(g) → C2H2(g)

227.0 kJ

6. B—The system is insulated and no work can be done on or by the system (rigid container); thus, the energy is constant. At the melting point, some of the gallium will melt and some will freeze, the entropy change of these two processes cancel each other so there is no net entropy change. 7. E—The process is endothermic (the ammonium chloride is absorbing heat to cool the water). Endothermic processes are “helped” by higher temperatures. Answers A and C, and possibly D would give an increase in temperature. There is insufficient information about answer B. 8. E—The reaction showing the greatest increase in the number of moles of gas will show the greatest entropy increase. If no gases are present, then the

Since the reaction becomes spontaneous, the sign must change. Recalling: ΔG = ΔH − TΔS. The sign change at higher temperature means that the entropy term (with ΔS > 0) must become more negative than the enthalpy term (ΔH > 0). 13. C— [2(436 kJ) + 499 kJ] − {2[2(464 kJ)]} = −485 kJ 14. A—This is the definition of ionization energy. 15. A—The reaction that produces the most gas will have the greatest increase in entropy; the one losing the most gas would have the greatest decrease. 16. A CO(g) + 2 H2(g) → CH3OH(g)

ΔH = −91 kJ

CH3OH(g) → CH3OH(I)

ΔH = −37 kJ

CO(g) + 2 H2(g) → CH3OH(l)

ΔH = −128 kJ

17. B—Dissolving almost always has: ΔS > 0. A decrease in temperature means the process has: ΔH > 0.

U Free-Response Questions Answer the following questions. You have 10 minutes, and you may not use a calculator. You may use the tables at the back of the book. Xe(g) + 3F2 (g) XeF6(g) Under standard conditions, the enthalpy change for the reaction going from left to right (forward reaction) is: ΔH ° = −294 kJ.


a. Is the value of ΔS °, for the above reaction, positive or negative? Justify your conclusion. b. The above reaction is spontaneous under standard conditions. Predict what will happen to ΔG for this reaction as the temperature is increased. Justify your prediction. c. Will the value of K remain the same, increase, or decrease as the temperature increases? Justify your prediction. d. Show how the temperature at which the reaction changes from spontaneous to nonspontaneous can be predicted. What additional information is needed?

U Answers and Explanations a. The value is negative. Give yourself 1 point if you predicted this. The decrease in the number of moles of gas, during the reaction, means there is a decrease in entropy. Give yourself 1 point for discussing the number of moles of gas. You may get this point even if you did not get the first point. b. Recalling: ΔG = ΔH − TΔS The value of ΔG will increase (become less negative). Give yourself 1 point for this answer if it is clearly stated that increasing means less negative. In general, both ΔH and ΔS are relatively constant. As the temperature increases, the value of the entropy term, TΔS, becomes more negative. The negative sign in front or this term leads to a positive contribution. The value of ΔG will first become less negative (more positive), and eventually the value will be positive (no longer spontaneous). Give yourself 1 point for the ΔG = ΔH − TΔS argument even if you did not get the first point. c. Recalling: ΔG = −RT ln K The value of K will decrease. You get 1 point for this answer. As the value of ΔG increases (see part b) the value of K will decrease. You get 1 point for using ΔG = −RT ln K in your discussion. If you got the justification for part b wrong, and you used the same argument here, you will not be penalized twice. You still get your point. d. Recalling: ΔG = ΔH − TΔS Rearranging this equation to: T = (ΔG − ΔH)/ΔS will allow the temperature to be estimated. This is worth 1 point. To do the calculation, the value of ΔS is needed. Give yourself 1 point for this. There is total of 8 points possible. All of the mathematical relations presented in the answers are provided in the exam booklet. Note that many students lose points on a question like this because their answers are too long. Keep your answers short and to the point, even if it appears that you have multiple pages available.

U Rapid Review G

Thermodynamics is the study of heat and its transformations.

G

Kinetic energy is energy of motion, while potential energy is stored energy.


G

G

G

G

G

G

G

G

G

The common units of energy are the joule, J, and the calorie, cal. A calorimeter is used to measure the heat released or absorbed during a chemical or physical change. Know how a calorimeter works. The specific heat capacity is the amount of heat needed to change the temperature of 1 gram of a substance by 1 K, while the molar heat capacity is the heat capacity per mole. The heat lost by the system in calorimetry is equal to the heat gained by the surroundings. The specific heat (c) of a solid can be calculated by: −(csolid × msolid × ΔTsolid) = cwater × mwater × ΔTwater or by g = cmΔT. The First Law of Thermodynamics states that the total energy of the universe is constant. (Energy is neither created nor destroyed.) The Second Law of Thermodynamics states that all spontaneous processes move in a way that increases the entropy (disorder) of the universe. The enthalpy change, ΔH, is equal to the heat lost or gained by the system under constant pressure conditions. ΔH values are associated with a specific reaction. If that reaction is reversed, the sign of ΔH changes. If one has to use a multiplier on the reaction, it must also be applied to the ΔH value. The standard enthalpy of formation of a compound, ΔHf°, is the enthalpy change when 1 mol of the substance is formed from its elements and all substances are in their standard states.

G

The standard enthalpy of formation of an element in its standard state is zero.

G

ΔH °rxn = Σ ΔHf° products − Σ ΔHf° reactants. Know how to apply this equation.

G

ΔH °rxn is usually negative for a spontaneous reaction.

G

ΔS ° = Σ S ° products − Σ S ° reactants. Know how to apply this equation.

G

ΔS ° is usually positive for a spontaneous reaction.

G

G

The Gibbs free energy is a thermodynamic quantity that relates the enthalpy and entropy, and is the best indicator for whether or not a reaction is spontaneous. If ΔG ° > 0 the reaction is not spontaneous; if ΔG ° < 0, the reaction is spontaneous; and if ΔG ° = 0, the reaction is at equilibrium.

G

ΔG ° = Σ ΔGf° products − Σ ΔGf° reactants. Know how to apply this equation.

G

ΔG ° = ΔH °rxn − T ΔS °rxn. Know how to apply this equation.

G

G

For a system not at equilibrium: ΔG = ΔG ° + RT ln Q = ΔG ° + 2.303 RT log Q. Know how to apply this equation. For a system at equilibrium: ΔG ° = −RT ln K = −2.303 RT log K. Know how to apply this equation to calculate equilibrium constants.

CHAPTER

10

Spectroscopy, Light, and Electrons IN THIS CHAPTER Summary: In developing the model of the atom it was thought initially that all subatomic particles obeyed the laws of classical physics—that is, they were tiny bits of matter behaving like macroscopic pieces of matter. Later, however, it was discovered that this particle view of the atom could not explain many of the observations being made. About this time the dual particle/wave model of matter began to gain favor. It was discovered that in many cases, especially when dealing with the behavior of electrons, describing some of their behavior in terms of waves explained the observations much better. Thus, the quantum mechanical model of the atom was born.

Keywords and Equations KEY IDEA

Speed of light, c = 3.0 × 108 ms−1 E = energy n = frequency p = momentum v = velocity

m = mass

E = hn −18

c = ln

−2.178 × 10 joule n2 Planck’s constant, h = 6.63 × 10−34 Js

En =

l = wavelength n = principal quantum number h λ= p = mv mv

The Nature of Light Light is a part of the electromagnetic spectrum—radiant energy composed of gamma rays, X-rays, ultraviolet light, visible light, etc. Figure 10.1 shows the electromagnetic spectrum. Í 137

138 U STEP 4. Review the Knowledge You Need to Score High Wavelength (m)

Gamma ray

1020

10−9

10−7

X-ray

Ultraviolet

1018

1016

10−5

Visible

10−11

10−3

Infrared

1014

10−1

Microwave

1012

1010

101

103

Radio frequency

108

106

104

Frequency (1/s)

Figure 10.1

The electromagnetic spectrum.

The energy of the electromagnetic spectrum moves through space as waves that have three associated variables—frequency, wavelength, and amplitude. The frequency, n, is the number of waves that pass a point per second. Wavelength, l, is the distance between two identical points on a wave. Amplitude is the height of the wave and is related to the intensity (or brightness, for visible light) of the wave. Figure 10.2 shows the wavelength and amplitude of a wave. The energy associated with a certain frequency of light is related by the equation: −34

E = hn where h is Planck’s constant = 6.63 × 10

Js

In developing the quantum mechanical model of the atom, it was found that the electrons can have only certain distinct quantities of energy associated with them, and that in order for the atom to change its energy it has to absorb or emit a certain amount of energy. The energy that is emitted or absorbed is really the difference in the two energy states and can be calculated by: ΔE = hn 8 All electromagnetic radiation travels at about the same speed in a vacuum, 3.0 × 10 m/s. This constant is called the speed of light (c). The product of the frequency and the wavelength is the speed of light:

c = nl Let’s apply some of the relationships. What wavelength of radiation has photons of −19 energy 7.83 × 10 J?

Wavelength l

Figure 10.2

Amplitude

Wavelength and amplitude of a wave.

Spectroscopy, Light, and Electrons Í 139

Answer: Using the equations ΔE = hn

and

c = nl

we get n = ΔE/h

and

l = c /n

Inserting the appropriate values: −19

n = ΔE/h = 7.83 × 10

J/6.63 × 10−34 Js = 1.18 × 1015 s−1

Then: l = c/n = (3.0 × 108 m/s)/(1.18 × 1015s−1) = 2.5 × 10−7m This answer could have been calculated more quickly by combining the original two equations to give: l = hc /ΔE

Wave Properties of Matter The concept that matter possesses both particle and wave properties was first postulated by de Broglie in 1925. He introduced the equation l = h/mv, which indicates a mass (m) moving with a certain velocity (v) would have a specific wavelength (l) associated with it. (Note that this v is the velocity not ν the frequency.) If the mass is very large (a locomotive), the associated wavelength is insignificant. However, if the mass is very small (an electron), the wavelength is measurable. The denominator may be replaced with the momentum of the particle (p = mv).

Atomic Spectra Late in the 19th century scientists discovered that when the vapor of an element was heated it gave off a line spectrum, a series of fine lines of colors instead of a continuous spectrum like a rainbow. This was used in the developing quantum mechanical model as evidence that the energy of the electrons in an atom was quantized, that is, there could only be certain distinct energies (lines) associated with the atom. Niels Bohr developed the first modern atomic model for hydrogen using the concepts of quantized energies. The Bohr model postulated a ground state for the electrons in the atom, an energy state of lowest energy, and an excited state, an energy state of higher energy. In order for an electron to go from its ground state to an excited state, it must absorb a certain amount of energy. If the electron dropped back from that excited state to its ground state, that same amount of energy would be emitted. Bohr’s model also allowed scientists to develop a method of calculating the energy associated with a particular energy level for the electron in the hydrogen atom: − 2 .18 ×10−18 joule n2 where n is the energy state. This equation can then be modified to calculate the energy difference between any two energy levels: En =

⎛ 1 1 ⎞ ΔE = − 2 .18 ×10−18 J ⎜⎜ 2 − 2 ⎟⎟ ⎝ nfinal ninitial ⎠


Atomic Orbitals Bohr’s model worked well for hydrogen, the simplest atom, but didn’t work very well for any others. In the early 1900s Schrödinger developed a more involved model and set of equations that better described atoms by using quantum mechanical concepts. His model introduced a mathematical description of the electron’s motion called a wave function or atomic orbital. Squaring the wave function (orbital) gives the volume of space in which the probability of finding the electron is high. This is commonly referred to as the electron cloud (electron density). Schrödinger’s equation required the use of three quantum numbers to describe each electron within an atom, corresponding to the orbital size, shape, and orientation in space. It was also found that a quantum number concerning the spin of the electron was needed. The first quantum number is the principal quantum number (n). It describes the energy (related to size) of the orbital and relative distance from the nucleus. The allowed (by the mathematics of the Schrödinger equation) values are positive integers (1, 2, 3, 4, etc.). The smaller the value of n, the closer the orbital is to the nucleus. The number n is sometimes called the atom’s shell. The second quantum number is the angular momentum quantum number (l ). Its value is related to the principal quantum number and has allowed values of 0 up to (n – 1). For example, if n = 3, then the possible values of l would be 0,1, and 2 (3 – 1). This value of l defines the shape of the orbital: • If l = 0, the orbital is called an s orbital and has a spherical shape with the nucleus at the center of the sphere. The greater the value of n, the larger the sphere. • If l = 1, the orbital is called a p orbital and has two lobes of high electron density on either side of the nucleus. This makes for an hourglass or dumbbell shape. • If l = 2, the orbital is a d orbital and can have variety of shapes. • If l = 3, the orbital is an f orbital, with more complex shapes. Figure 10.3 shows the shapes of the s, p, and d orbitals. These are sometimes called sublevels or subshells. The third quantum number is the magnetic quantum number (m l ). It describes the orientation of the orbital around the nucleus. The possible values of m1 depend on the value of the angular momentum quantum number, l. The allowed values for ml are –l through zero to +l. For example, for l = 2 the possible values of ml would be –2, –1, 0, +1, +2. This is why, for example, if l = 1 (a p orbital), then there are three p orbitals corresponding to ml values of –1, 0, +1. This is also shown in Figure 10.3. The fourth quantum number, the spin quantum number (ms), indicates the direction the electron is spinning. There are only two possible values for ms , + 1⁄2 and –1⁄2. The quantum numbers for the six electrons in carbon would be:

QUANTUM NUMBER

FIRST ELECTRON

n l ml ms

1 0 0 + 1⁄2

SECOND ELECTRON

1 0 0 − 1⁄2

THIRD ELECTRON

FOURTH ELECTRON

2 0 0 + 1⁄2

2 0 0 − 1⁄2

FIFTH ELECTRON

2 1 1 + 1⁄2

Therefore, the electron configuration of carbon is 1s22s22p2.

SIXTH ELECTRON

2 1 0 +1/2

Spectroscopy, Light, and Electrons Í 141 z y x

s orbital (a)

z

z

z

y x

y x

pz orbital

y x

px orbital

py orbital

(b)

z

z

z y x

x

dxz orbital

y x

dxy orbital z

dyz orbital z

y x

y x

dx 2 −y 2 orbital

dz 2 orbital (c)

Figure 10.3

The shapes of the s, p, and d atomic orbitals.

Experimental No experimental questions related to this chapter have appeared on the AP exam in recent years. STRATEGY


1. 2. 3. 4. 5.

Be sure not to confuse wavelength and frequency. 8 The speed of light is 3.0 × 10 m/s. The exponent is positive. The value of n is never zero. The values of l and ml include zero. Do not confuse velocity (v) and frequency (n ).


U Review Questions You have 15 minutes. You may not use a calculator. You may use the periodic table at the back of the book. Questions 1–4 refer to the following orbital diagrams. (A) 1s ↑ 2s ↑↑ (B) 1s↑↓ 2s ↑ (C) [Kr] 5s ↑↓ 4d ↑ ↑ (D) [Ne] 3s↑↓ 3p ↑ ↑ ↑ (E) 1s ↑↓ 2s ↑↓ 2p ↑↓ ↑↓

Use the following ground-state electron configurations for questions 8–11: (A) (B) (C) (D) (E)

↑↓

2 6 2 3 ls lp 2s 2p 2 2 6 2 ls 2s 2p 3s 3p64s23d104p65s24d1 ls22s22p63s23p63d3 ls22s22p5 ls22s22p63s23p64s23d104p6

1. The least reactive element is represented by:

8. The electron configuration of a halogen is:

2. The transition element is represented by:

9. This is a possible configuration for a transition metal atom.

3. The most chemically reactive element is represented by:

10. This electron configuration is not possible.

4. The element in an excited state is represented by:

11. This is a possible configuration of a transition metal ion.

5. The ground-state configuration of Fe of the following? (A) (B) (C) (D) (E)

2+

is which

2 2 6 2 6 5 1 ls 2s 2p 3s 3p 3d 4s 2 2 6 2 6 ls 2s 2p 3s 3p 3d6 ls22s22p63s23p63d64s2 ls22s22p63s23p63d84s2 ls22s22p63s23p63d44s2

6. Which of the following contains only atoms that are diamagnetic in their ground state? (A) (B) (C) (D) (E)

Kr, Ca, and P Cl, Mg, and Cd Ar, K, and Ba He, Sr, and C Ne, Be, and Zn

7. A valence electron from an arsenic atom might have an electron with the following set of quantum numbers in the ground state. (A) (B) (C) (D) (E)

n = 4; l = 1; ml = 0; ms = + 1⁄2 n = 4; l = 1; ml = 2; ms = −1⁄2 n = 3; l = 1; ml = 0; ms = +1⁄2 n = 5; l = 1; ml = −1; ms = −1⁄2 n = 4; l = 2; ml = +l; ms = +1⁄2

The following answers are to be used for questions 12–15: (A) (B) (C) (D) (E)

Pauli exclusion principle electron shielding the wave properties of matter Heisenberg uncertainty principle Hund’s rule

12. The exact position of an electron is not known. 13. Oxygen atoms, in their ground state, are paramagnetic. 14. An atomic orbital can hold no more than two electrons. 15. The reason the 4s orbital fills before the 3d: 16. In the ground state the highest-energy electron of a rubidium atom might have which of the following sets of quantum numbers? (A) (B) (C) (D) (E)

n = 5; l = 0; ml = 1; ms = + 1⁄2 n = 5; l = 1; ml = 1; ms = + 1⁄2 n = 4; l = 0; ml = 0; ms = + 1⁄2 n = 5; l = 0; ml = 0; ms = + 1⁄2 n = 6: l = 0; ml = 0; ms = + 1⁄2


17. Calcium reacts with element X to form an ionic compound. If the ground-state electron configu2 2 4 ration of X is ls 2s 2p , what is the simplest formula for this compound? (A) (B) (C) (D) (E)

CaX CaX2 Ca4X2 Ca2X2 Ca2X3

U Answers and Explanations 1. E—This configuration represents a noble gas (neon). The outer s and p orbitals are filled.

11. C—The outer s electrons are not present in most transition metal ions.

2. C—Transition elements have partially filled d orbitals. This configuration is for the metal zirconium.

12. D—This is part of the Heisenberg uncertainty principle.

3. B—The single electron in the s orbital indicates that this is the very reactive alkali metal lithium. 4. A—The 1s orbital is not filled. One indication of excited states is to have one or more inner orbitals unfilled. 5. B—The electron configuration for iron is 2 2 6 2 6 6 2 ls 2s 2p 3s 3p 3d 4s . To produce an iron(II) ion, the two 4s electrons are removed first. 6. E—The elements that are normally diamagnetic are those in the same columns of the periodic table as Be, Zn, and He. All others are normally paramagnetic. 7. A—The electron configuration for arsenic is 2 2 6 2 6 2 10 3 Is 2s 2p 3s 3p 4s 3d 4p . The valence shell is the outer shell (largest n). In this case the outer shell 2 3 electrons are 4s 4p . This means that n = 4, and that l = 0 or 1. If l = 0, then ml = 0; and if l = 1, then ml = −l, 0, or +1. Finally, ms must be either +1⁄2 or −1⁄2. 2 5 8. D—Halogens have a valence shell with s p .

9. B—Transition metals have partially filled d 1−10 1 2 orbitals (d ), along with an s or s . 10. A—The 1p orbital does not exist.

13. E—The four electrons in the oxygen 2p orbitals are arranged with one pair and two unpaired electrons with parallel spins. This makes the oxygen atom paramagnetic. This arrangement is due to Hund’s rule. 14. A—The Pauli exclusion principle restricts the number of electrons that can occupy a single orbital. 15. B—The d orbitals are shielded more efficiently than the s orbitals. Thus, the less shielded d orbitals do not fill as readily as s orbitals with similar energy. 16. D—The electron configuration of rubidium is 2 2 6 2 6 2 10 6 1 ls 2s 2p 3s 3p 4s 3d 4p 5s . This gives n = 5 and l = 0 for the last electron. If l = 0 then ml must equal 0. The value of ms may be either +1⁄2 or −1⁄2 17. A—Calcium will form a +2 ion (Ca2+), and X will need to gain two electrons to fill its outer 2− shell and become a −2 ion (X ). The simplest formula for a compound containing a +2 ion and a −2 ion would be CaX. The other answers involve different charges or a formula that has not been simplified.


U Free-Response Questions Answer the following questions. You have 15 minutes, and you may use a calculator and the tables at the back of the book. a. The bond energy of fluorine is 159 kJ/mol. i.

Determine the energy, in J, of a photon of light needed to break a F–F bond.

ii.

−1 Determine the frequency of this photon in s .

iii. Determine the wavelength of this photon in nanometers. 7 b. Determine the wavelength, in m, of an alpha particle traveling at 5.2 × 10 m/s. An −24 alpha particle has a mass of 6.6 × 10 g.

c. Barium imparts a characteristic green color to a flame. The wavelength of this light is 551 nm. Determine the energy involved in kJ/mol.

U Answers and Explanations a. Several of the equations given at the beginning of the exam are needed. In addition, the values of Planck’s constant, Avogadro’s number, and the speed of light are needed. These constants are also given on the exam. i.

This is a simple conversion problem: ⎛ 159 kJ ⎞ ⎛ 1mol ⎞ ⎛ 1000 J ⎞ −19 ⎟ ⎜ ⎟⎜ ⎟ = 2.64 × 10 J 23 ⎜ ⎝ mol ⎠ ⎝ 6.022 × 10 ⎠ ⎝ 1 kJ ⎠ Give yourself 1 point if you got this answer.

ii.

This part requires the equation ΔE = hn: ΔE 2 .64 ×10−19 J = = 3 .98 ×1014 s –1 − 34 h 6 .63 ×10 Js Give yourself 1 point for this answer. If you got the wrong answer in the preceding −19 part, but used it correctly here (in place of the 2.64 × 10 J), you still get 1 point.

ν=

iii. The equation c = ln is needed. 8 ⎞ ⎛ 109 nm ⎞ c ⎛ 2 λ = = ⎜ 3 .0 ×10 14m/s–1 ⎟ ⎜ ⎟ = 7 .5 ×10 nm ν ⎝ 3 .98 ×10 s ⎠ ⎝ 1m ⎠

Again, give yourself 1 point for the correct answer. If you correctly used a wrong answer from the preceding part, you still get 1 point.


b. This equation requires the de Broglie relationship (also given in the AP exam booklet). 2 2 Do not mistake a v for a n. You will also need to know J = kg m /s .

λ=

h ⎛ 6 .63 ×10−34 Js ⎞ ⎛ kg m 2 /s 2 ⎞ ⎛ 1000g ⎞ − 15 =⎜ ⎟⎜ ⎟ = 1 .9 ×10 m ⎟⎜ mν ⎝ 6 .6 ×10−24 g ⎠ ⎝ 5 .2 ×1 07 m/s ⎠ ⎝ J kg ⎠

This answer is worth 1 point. c. This can be done as a one-step or a two-step problem. The AP test booklet gives you the equations to solve this directly as a two-step problem. This method will be followed here. The two equations may be combined to produce an equation that will allow you to do the problem in one step. Using c = ln: ⎛ 3 .0 ×108 m/s ⎞ ⎛ 109 nm ⎞ 14 −1 ν = c /λ = ⎜ ⎟⎜ ⎟ = 5 .4 ×10 s ⎝ 551 nm ⎠ ⎝ 1 m ⎠ Using ΔE = hn: −34

ΔE = (6.63 × 10

Js)(5.4 × 1014 s−1)(1 kJ/1000 J)(6.022 × 1023/mol)

2 = 2.2 × 10 kJ/mol

Give yourself 1 point for each of these answers. If you did the problem as a one-step problem, give yourself 2 points if you got the final answer correct, or 1 point if you left out any of the conversions. The total for this question is 6 points, minus 1 point if any answer does not have the correct number of significant figures.

U Rapid Review • Know the regions of the electromagnetic spectrum. • The frequency, n, is defined as the number of waves that pass a point per second. • The wavelength, l, is the distance between two identical points on a wave. • The energy of light is related to the frequency by E = hn. • The product of the frequency and wavelength of light is the speed of light: c = nl • An orbital or wave function is a quantum mechanical, mathematical description of the electron. • If all electrons in an atom are in their lowest possible energy level, then the atom is said to be in its ground state. • If any electrons in an atom are in a higher energy state, then the atom is said to be in an excited state. • The energy of an atom is quantized, existing in only certain distinct energy states.

146 U STEP 4. Review the Knowledge You Need to Score High • Quantum numbers are numbers used in Schrödinger’s equation to describe the orbital size, shape, and orientation in space, and the spin of an electron. • The principal quantum number, n, describes the size of the orbital. It must be a positive integer. It is sometimes referred to as the atom’s shell. • The angular momentum quantum number, l, defines the shape of the electron cloud. If l = 0, it is an s orbital; if l = 1, it is a p orbital; if l = 2, it is a d orbital; if l = 3, it is an f orbital, etc. • The magnetic quantum number, ml , describes the orientation of the orbital around the nucleus. It can be integer values ranging from −l through 0 to +l. • The spin quantum number, ms, describes the spin of the electron and can only have values of +1⁄2 and −1⁄2 . • Be able to write the quantum numbers associated with the first 20 electrons.

CHAPTER

11 Bonding

KEY IDEA

IN THIS CHAPTER Summary: The difference between elements and compounds was discussed in the Basics chapter, and chemical reactions were discussed in the Reaction and Periodicity chapter. But what are the forces holding together a compound? What is the difference in bonding between table salt and sugar? What do these compounds look like in three-dimensional space? Compounds have a certain fixed proportion of elements. The periodic table often can be used to predict the type of bonding that might exist between elements. The following general guidelines apply: metals + nonmetals → ionic bonds nonmetal + nonmetal → covalent bonds metal + metal → metallic bonding We will discuss the first two types of bonding, ionic and covalent, in some depth. Metallic bonding is a topic that is very rarely encountered on the AP exam. Suffice it to say that metallic bonding is a bonding situation between metals in which the valence electrons are donated to a vast electron pool (sometimes called a “sea of electrons”), so that the valence electrons are free to move throughout the entire metallic solid. The basic concept that drives bonding is related to the stability of the noble gas family (the group VIIIA or group 18 elements). Their extreme stability (lower energy state) is due to the fact that they have a filled valence shell, a full complement of eight valence electrons. (Helium is an exception, Its valence shell, the 1s, is filled with two electrons.) This is called the octet rule. During chemical reactions, atoms lose, gain, or share electrons in order to achieve a filled valence shell, to complete their octet. By completing their valence shell in this fashion they become isoelectronic, having the same number and arrangement

Í 147

148 U Step 4. Review the Knowledge You Need to Score High of electrons, as the closest noble gas. There are numerous exceptions to the octet rule; for example, some atoms may have more than an octet. Keywords and Equations KEY IDEA

There are no keywords or equations on the AP exam specific to this chapter.

Lewis Electron-Dot Structures The Lewis electron-dot symbol is a way of representing the element and its valence electrons. The chemical symbol is written, which represents the atom’s nucleus and all innershell electrons. The valence, or outer-shell, electrons are represented as dots surrounding the atom’s symbol. Take the valence electrons, distribute them as dots one at a time around the four sides of the symbol and then pair them up until all the valence electrons are distributed Figure 11.1 shows the Lewis symbol for several different elements. The Lewis symbols will be used in the discussion of bonding, especially covalent bonding, and will form the basis of the discussion of molecular geometry.

Na

Figure 11.1

Mg

C

N

F

Lewis electron-dot symbols for selected elements.

Ionic and Covalent Bonding Ionic Bonding Ionic bonding results from the transfer of electrons from a metal to a nonmetal with the formation of cations (positively charged ions) and anions (negatively charged ions). The attraction of the opposite charges forms the ionic bond. The metal loses electrons to form a cation (the positive charge results from having more protons than electrons), and the nonmetal becomes an anion by gaining electrons (it now has more electrons than protons). This is shown in Figure 11.2 for the reaction of sodium and chlorine to form sodium chloride. The number of electrons to be lost by the metal and gained by the nonmetal is determined by the number of electrons lost or gained by the atom in order to achieve a full octet. There is a rule of thumb that an atom can gain or lose one or two and, on rare occasions, three electrons, but not more than that. Sodium has one valence electron in energy level 3.

Na Metal

+

Cl

Na+

Nonmetal

Cation

+

Cl − Anion

NaCl Sodium chloride

Figure 11.2

Formation of sodium chloride.

Bonding Í 149

TIP

If it lost that one, the valence shell, now energy level 2, would be full (a more common way of showing this is with zero electrons). Chlorine, having seven valence electrons, needs to gain one more in order to complete its octet. So an electron is transferred from sodium to chlorine, completing the octet for both. If magnesium, with two valence electrons to be lost, reacts with chlorine (which needs one additional electron), then magnesium will donate one valence electron to each of two chlorine atoms, forming the ionic compound MgCl2. Make sure the formula has the lowest whole number ratio of elements. If aluminum, with three valence electrons to be lost, reacts with oxygen, which needs two additional electrons to complete its octet, then the lowest common factor between 3 and 2 must be found—6. Two aluminum atoms would each lose 3 electrons (total of 6 electrons lost) to three oxygen atoms, which would each gain two electrons (total 6 electrons gained). The total number of electrons lost must equal the total number of electrons gained. Another way of deriving the formula of the ionic compound is the crisscross rule. In this technique the cation and anion are written side by side. The numerical value of the superscript charge on the cation (without the sign) becomes the subscript on the nonmetal in the compound, and the superscript charge on the anion becomes the subscript on the metal in the compound. Figure 11.3 illustrates the crisscross rule for the reaction between aluminum and oxygen.

Al

3

+

Figure 11.3

O

2

−

Al2O3

Using the crisscross rule.

If magnesium reacts with oxygen, then automatic application of the crisscross rule would lead to the formula Mg2O2, which is incorrect because the subscripts are not in the lowest whole-number ratio. For the same reason, lead(IV) oxide would have the formula PbO2 and not Pb2O4. Make sure the formula has the lowest whole-number ratio of elements. Ionic bonding may also involve polyatomic ions. The polyatomic ion(s) simply replace(s) one or both of the monoatomic ions.

Covalent Bonding Consider two hydrogen atoms approaching each other. Both have only one electron, and each requires an additional electron to become isoelectronic with the nearest noble gas, He. One hydrogen atom could lose an electron; the other could gain that electron. One atom would have achieved its noble gas arrangement; but the other, the atom that lost its electron, has moved farther away from stability. The formation of the very stable H2 cannot be explained by the loss and gain of electrons. In this situation, like that between any two nonmetals, electrons are shared, not lost and gained. No ions are formed. It is a covalent bond that holds the atoms together. Covalent bonding is the sharing of one or more pairs of electrons. The covalent bonds in a molecule often are represented by a dash, which represents a shared pair of electrons. These covalent bonds may be single bonds, one pair of shared electrons as in H–H; double bonds, two shared pairs of electrons H2C=CH2; or triple bonds, three shared pairs of electrons, N⬅N. The same driving force forms a covalent bond as an ionic bond—establishing a stable (lower energy) electron arrangement. In the case of the covalent bond, it is accomplished through sharing electrons.

150 U Step 4. Review the Knowledge You Need to Score High In the hydrogen molecule the electrons are shared equally. Each hydrogen nucleus has one proton equally attracting the bonding pair of electrons. A bond like this is called a nonpolar covalent bond. In cases where the two atoms involved in the covalent bond are not the same, the attraction is not equal, and the bonding electrons are pulled toward the atom with the greater attraction. The bond becomes a polar covalent bond, with the atom that has the greater attraction taking on a partial negative charge and the other atom a partial positive charge. Consider for example, HF(g). The fluorine has a greater attraction for the bonding pair of electrons (greater electronegativity) and so takes on a partial negative charge. Many times, instead of using a single line to indicate the covalent bond, an arrow is used with the arrow head pointing toward the atom that has the greater attraction for the electron pair: δ+

H − Fδ− — +— →

The electronegativity (EN) is a measure of the attractive force that an atom exerts on a bonding pair of electrons. Electronegativity values are tabulated. In general, electronegativities increase from left to right on the periodic table, except for the noble gases, and decrease going from top to bottom. This means that fluorine has the highest electronegativity of any element. If the difference in the electronegativities of the two elements involved in the bond is great (>1.7), the bond is considered to be mostly ionic in nature. If the difference is slight (2000 770 0.00 −85.5 −182

Explain the relative values of the melting points of these substances. Second Free-Response Question

Answer the following questions. You have 15 minutes, and you may not use a calculator.You may use the tables in the back of the book. Answer the following questions about structure and bonding. a. Which of the following tetrafluorides is nonpolar? Use Lewis electron-dot structures to explain your conclusions. SiF4 SF4

XeF4

b. Rank the following compounds in order of increasing melting point. Explain your answer. Lewis electron-dot structures may aid you. SnF2

SeF2

KrF2

c. Use Lewis electron-dot structures to show why the carbon–oxygen bonds in the oxalate ion (C2O4 2−)are all equal. d. When PCl5 is dissolved in a polar solvent, the solution conducts electricity. Explain why. Use an appropriate chemical equation to illustrate your answer.


a. i. Nitrite ion:

O

N

O

Nitrate ion:

O

N O

O

Bonding Í 163

Give yourself 1 point for each structure that is correct. The double bonds could be between the nitrogen and any of the oxygens, not just the ones shown. Only one double bond per structure is allowed. ii. If you predicted the nitrite ion has the shorter bond length, you have earned 1 point. The explanation must invoke resonance. You do not need to show all the resonance structures. You need to mention that the double bond “moves” from one oxygen to another. In the nitrite ion, each N–O bond is a double bond half the time and a single bond the other half. This gives an average of 1.5 bonds between the nitrogen and each of the oxygens. Similarly, for the nitrate ion, each N–O bond spends one-third of the time as a double bond, and two-thirds of the time as a single bond. The average N–O bond is 1.33. The larger the average number of bonds, the shorter the bond is. This explanation will get you 1 point. b. Give yourself 1 point for each correct Lewis structure. ClF3 BF3 — B — F: — Cl — F: :F :F | | :F: :F: The BF3, with three bonding pairs and zero nonbonding pairs on the central atom, is not polar. The ClF3, with five pairs about the central atom, is polar because of the two lone pairs. Give yourself 1 point for this explanation. c. You get 1 point for saying that the two compounds with the highest melting points are ionic and the other compounds are molecular. You get 1 point if you say that SrS is higher than KCl because the charges on the ions in SrS are higher. You get 1 point if you say H2O is higher than the lowest two because of hydrogen bonding. You get 1 point if you say H2S is higher than CH4 because H2S is polar and CH4 is nonpolar. There are a maximum of 11 points. Second Free-Response Question

a. Silicon tetrafluoride is the only one of the three compounds that is not polar. F F

Si

F F

F

F

S

F

F

F

Xe

F

F F

SiF4: four bonding

SF4: four bonding

XeF4: four bonding

pairs and no

pairs and one

pairs and two

lone pairs.

lone pair.

lone pairs.

Tetrahedral

See-saw

Square planar

164 U Step 4. Review the Knowledge You Need to Score High You get 1 point if you correctly predict only SiF4 to be nonpolar. You get 1 additional point for each correct Lewis structure. b. The order is: KrF2 < SeF2 < SnF2. F

Se −

2+

Kr

F

F

Sn

F

KrF2: two bonding pairs and three nonbonding pairs

SeF2: two bonding pairs and two nonbonding pairs

2

F

SnF2: ionic

The Lewis structure indicates that KrF2 is nonpolar. Thus, it only has very weak London dispersion forces between the molecules. SeF2 is polar and the molecules are attracted by dipole–dipole attractions, which are stronger than London. SnF2 has the highest melting point, because of the presence of strong ionic bonds. You get 1 point for the order, and 1 point for the discussion. c. The following resonance structures may be drawn for the oxalate ion. The presence of resonance equalizes the bonds. 2−

O

O C O

2−

O

C

O C

O

O

2−

O

O

C

C O

2−

O

C

O

O C

O

O

C O

2− You get 1 point for any correct Lewis structure for C2O4 ,and 1 point for showing or discussing resonance.

d. PCl5 must ionize. There are two acceptable equations. 2 PCl 5 PCl 4 + + PCl 6– or PCl 5 PCl 4 + + Cl – You get 1 point for the explanation, and you get 1 point for either of the equations. Total your points for the different parts. There are 10 points possible.

U Rapid Review G

G

G

G

G

G

Compounds are pure substances that have a fixed proportion of elements. Metals react with nonmetals to form ionic bonds, and nonmetals react with other nonmetals to form covalent bonds. The Lewis electron-dot structure is a way of representing an element and its valence electrons. Atoms tend to lose, gain, or share electrons to achieve the same electronic configuration (become isoelectronic to) as the nearest noble gas. Atoms are generally most stable when they have a complete octet (eight electrons). Ionic bonds result when a metal loses electrons to form cations and a nonmetal gains those electrons to form an anion.

Bonding Í 165 G

Ionic bonds can also result from the interaction of polyatomic ions.

G

The attraction of the opposite charges (anions and cations) forms the ionic bond.

G

The crisscross rule can help determine the formula of an ionic compound.

G

In covalent bonding two atoms share one or more electron pairs.

G

G

G

G

G

G

G

G

G

G

G

G

If the electrons are shared equally, the bond is a nonpolar covalent bond, but unequal sharing results in a polar covalent bond. The element that will have the greatest attraction for a bonding pair of electrons is related to its electronegativity. Electronegativity values increase from left to right on the periodic table and decrease from top to bottom. The N – A = S rule can be used to help draw the Lewis structure of a molecule. Molecular geometry, the arrangement of atoms in three-dimensional space, can be predicted using the VSEPR theory. This theory says the electron pairs around a central atom will try to get as far as possible from each other to minimize the repulsive forces. In using the VSEPR theory, first determine the electron-group geometry, then the molecular geometry. The valence bond theory describes covalent bonding as the overlap of atomic orbitals to form a new kind of orbital, a hybrid orbital. The number of hybrid orbitals is the same as the number of atomic orbitals that were mixed together. There are a number of different types of hybrid orbital, such as sp, sp2, and sp3. In the valence bond theory, sigma bonds overlap on a line drawn between the two nuclei, while pi bonds result from the overlap of atomic orbitals above and below a line connecting the two atomic nuclei. A double or triple bond is always composed of one sigma bond and the rest pi. In the molecular orbital (MO) theory of covalent bonding, atomic orbitals form molecular orbitals that encompass the entire molecule.

G

The MO theory uses bonding and antibonding molecular orbitals.

G

The bond order is (# electrons in bonding MOs – # electrons in anti-bonding MOs)/2.

G

G

G

Resonance occurs when more than one Lewis structure can be written for a molecule. The actual structure of the molecule is an average of the Lewis resonance structures. The higher the bond order, the shorter and stronger the bond. Paramagnetism, the attraction of a molecule to a magnetic field, is due to the presence of unpaired electrons. Diamagnetism, the repulsion of a molecule from a magnetic field, is due to the presence of paired electrons.

CHAPTER

12

Solids, Liquids, and Intermolecular Forces IN THIS CHAPTER Summary: In the chapter on Gases we discussed the gaseous state. In this chapter, we will discuss the liquid and solid states and the forces that exist between the particles––the intermolecular forces. A substance’s state of matter depends on two factors: the average kinetic energy of the particles, and the intermolecular forces between the particles. The kinetic energy tends to move the particles away from each other. The temperature of the substance is a measure of the average kinetic energy of the molecules. As the temperature increases, the average kinetic energy increases and the particles tend to move farther apart. This is consistent with our experience of heating ice, for example, and watching it move from the solid state to the liquid state and finally to the gaseous state. For this to happen, the kinetic energy overcomes the forces between the particles, the intermolecular forces. In the solid state, the kinetic energy of the particles cannot overcome the intermolecular forces; the particles are held close together by the intermolecular forces. As the temperature increases, the kinetic energy increases and begins to overcome the attractive intermolecular forces. The substance will eventually melt, going from the solid to the liquid state. As this melting takes place, the temperature remains constant even though energy is being added. The temperature at which the solid converts into the liquid state is called the melting point (m.p.) of the solid. After all the solid has been converted into a liquid, the temperature again starts to rise as energy is added. The particles are still relatively close together, but possess enough kinetic energy to move with respect to each other. Finally, if enough energy is added, the particles start to break free of

166 U

Solids, Liquids, and Intermolecular Forces Í 167 the intermolecular forces keeping them relatively close together and they escape the liquid as essentially independent gas particles. This process of going from the liquid state to the gaseous state is called boiling, and the temperature at which this occurs is called the boiling point (b.p.) of the liquid. Sometimes, however, a solid can go directly from the solid state to the gaseous state without ever having become a liquid. This process is called sublimation. Dry ice, solid carbon dioxide, readily sublimes. These changes of state, called phase changes, are related to temperature, but sometimes pressure can influence the changes. We will see how these relationships can be diagrammed later in this chapter. Keywords and Equations KEY IDEA

No specific keywords or equations are listed on the AP exam for this topic.

Structures and Intermolecular Forces Intermolecular forces are attractive or repulsive forces between molecules, caused by partial charges. The attractive forces are the ones that work to overcome the randomizing forces of kinetic energy. The structure and type of bonding of a particular substance have quite a bit to do with the type of interaction and the strength of that interaction. Before we start examining the different types of intermolecular forces, recall from the Bonding chapter that those molecules that have polar covalent bonding (unequal sharing of the bonding electron pair) may possess dipoles (having positive and negative ends due to charge separation within the molecule). Dipoles are often involved in intermolecular forces.

Ion–Dipole Intermolecular Forces These forces are due to the attraction of an ion and one end of a polar molecule (dipole). This type of attraction is especially important in aqueous salt solutions, where the ion 3+ attracts water molecules and may form a hydrated ion, such as Al(H2O)6 . This is one of the strongest of the intermolecular forces. It is also important to realize that this intermolecular force requires two different species––an ion and a polar molecule.

Dipole–Dipole Intermolecular Forces These forces result from the attraction of the positive end of one dipole to the negative end of another dipole. For example, in gaseous hydrogen chloride, HCl(g), the hydrogen end has a partial positive charge and the chlorine end has a partial negative charge, due to chlorine’s higher electronegativity. Dipole–dipole attractions are especially important in polar liquids. They tend to be a rather strong force, although not as strong as ion–dipole attractions.

Hydrogen Bond Intermolecular Forces Hydrogen bonding is a special type of dipole–dipole attraction in which a hydrogen atom is polar-covalently bonded to one of the following extremely electronegative elements: N, O, or F. These hydrogen bonds are extremely polar bonds by nature, so there is a great degree of charge separation within the molecule. Therefore, the attraction of the positively charged hydrogen of one molecule and the negatively charged N, O, or F of another molecule is extremely strong. These hydrogen bonds are in general, stronger than the typical dipole–dipole interaction.

168 U Step 4. Review the Knowledge You Need to Score High Hydrogen bonding explains why HF(aq) is a weak acid, while HCl(aq), HBr(aq), etc. are strong acids. The hydrogen bond between the hydrogen of one HF molecule and the fluorine of another “traps” the hydrogen, so it is much harder to break its bonds and free the hydrogen to + be donated as an H . Hydrogen bonding also explains why water has such unusual properties–– for example, its unusually high boiling point and the fact that its solid phase is less dense than its liquid phase. The hydrogen bonds tend to stabilize the water molecules and keep them from readily escaping into the gas phase. When water freezes, the hydrogen bonds are stabilized and lock the water molecules into a framework with a lot of open space. Therefore, ice floats in liquid water. Hydrogen bonding also holds the strands of DNA together.

Ion-Induced Dipole and Dipole-Induced Dipole Intermolecular Forces These types of attraction occur when the charge on an ion or a dipole distorts the electron cloud of a nonpolar molecule and induces a temporary dipole in the nonpolar molecule. Like ion–dipole intermolecular forces, these also require two different species. They are fairly weak interactions.

London (Dispersion) Intermolecular Force This intermolecular attraction occurs in all substances, but is significant only when the other types of intermolecular forces are absent. It arises from a momentary distortion of the electron cloud, with the creation of a very weak dipole. The weak dipole induces a dipole in another nonpolar molecule. This is an extremely weak interaction, but it is strong enough to allow us to liquefy nonpolar gases such as hydrogen, H2, and nitrogen, N2. If there were no intermolecular forces attracting these molecules, it would be impossible to liquefy them.

The Liquid State At the microscopic level, liquid particles are in constant flux. They may exhibit short-range areas of order, but these do not last very long. Clumps of particles may form and then break apart. At the macroscopic level, a liquid has a specific volume but no fixed shape. Three other macroscopic properties deserve discussion: surface tension, viscosity, and capillary action. In the body of a liquid the molecules are pulled in all different ways by the intermolecular forces between them. At the surface of the liquid, the molecules are only being pulled into the body of the liquid from the sides and below, not from above. The effect of this unequal attraction is that the liquid tries to minimize its surface area by forming a sphere. In a large pool of liquid, where this is not possible, the surface behaves as if it had a thin “skin” over it. It requires force to break the attractive forces at the surface. The amount of force required to break through this molecular layer at the surface is called the liquid’s surface tension. The greater the intermolecular forces, the greater the surface tension. Polar liquids, especially those that undergo hydrogen bonding, have a much higher surface tension than nonpolar liquids. Viscosity, the resistance of liquids to flow, is affected by intermolecular forces, temperature, and molecular shape. Liquids with strong intermolecular forces tend to have a higher viscosity than those with weak intermolecular forces. Again, polar liquids tend to have a higher viscosity than nonpolar liquids. As the temperature increases, the kinetic energy of the particles becomes greater, overcoming the intermolecular attractive forces. This causes a lower viscosity. Finally, the longer and more complex the molecules, the more contact the particles will have as they slip by each other, increasing the viscosity. Capillary action is the spontaneous rising of a liquid through a narrow tube, against the force of gravity. It is caused by competition between the intermolecular forces in the liquid

Solids, Liquids, and Intermolecular Forces Í 169

and those attractive forces between the liquid and the tube wall. The stronger the attraction between the liquid and the tube, the higher the level will be. Liquids that have weak attractions to the walls, like mercury in a glass tube, have a low capillary action. Liquids like water in a glass tube have strong attractions to the walls and will have a high capillary action. As we have noted before, water, because of its stronger intermolecular forces (hydrogen bonding) has some very unusual properties. It will dissolve a great number of substances, both ionic and polar covalent, because of its polarity and ability to form hydrogen bonds. It is sometimes called the “universal solvent.” It has a high heat capacity, the heat absorbed to cause the temperature to rise, and a high heat of vaporization, the heat needed to transform the liquid into a gas. Both of these thermal properties are due to the strong hydrogen bonding between the water molecules. Water has a high surface tension for the same reason. The fact that the solid form of water (ice) is less dense than liquid water is because water molecules in ice are held in a rigid, open, crystalline framework by the hydrogen bonds. As the ice starts melting, the crystal structure breaks and water molecules fill the holes in the structure, increasing the density. The density reaches a maximum at around 4°C; then the increasing kinetic energy of the particles causes the density to begin to decrease.

The Solid State At the macroscopic level a solid is defined as a substance that has both a definite volume and a definite shape. At the microscopic level, solids may be one of two types––amorphous or crystalline. Amorphous solids lack extensive ordering of the particles. There is a lack of regularity of the structure. There may be small regions of order separated by large areas of disordered particles. They resemble liquids more than solids in this characteristic. Amorphous solids have no distinct, melting point. They simply get softer and softer as the temperature rises, leading to a decrease in viscosity. Glass, rubber, and charcoal are examples of amorphous solids. Crystalline solids display a very regular ordering of the particles in a three-dimensional structure called the crystal lattice. In this crystal lattice there are repeating units called unit cells. Figure 12.1 shows the relationship of the unit cells to the crystal lattice. Several types of unit cells are found in solids. The cubic system is the type most commonly appearing on the AP exam. Three types of unit cells are found in the cubic system: 1. The simple cubic unit cell has particles located at the corners of a simple cube. 2. The body-centered unit cell has particles located at the corners of the cube and in the center of the cube. 3. The face-centered unit cell has particles at the corners and one in the center of each face of the cube, but not in the center of the cube itself. Figure 12.2 shows three types of cubic unit cells. Five types of crystalline solid are known: 1. In atomic solids, individual atoms are held in place by London forces. The noble gases are the only atomic solids known to form. 2. In molecular solids, lattices composed of molecules are held in place by London forces, dipole–dipole forces, and hydrogen bonding. Solid methane and water are examples of molecular solids. 3. In ionic solids, lattices composed of ions are held together by the attraction of the opposite charges of the ions. These crystalline solids tend to be strong, with high melting points because of the strength of the intermolecular forces. NaCl and other salts are examples of ionic solids. Figure 12.3 shows the lattice structure of NaCl. Each sodium


Unit cell

Figure 12.1

The crystal lattice for a simple cubic unit cell.

cation is surrounded by six chloride anions, and each chloride anion is surrounded by six sodium cations. 4. In metallic solids, metal atoms occupying the crystal lattice are held together by metallic bonding. In metallic bonding, the electrons of the atoms are delocalized and are free to move throughout the entire solid. This explains electrical and thermal conductivity, as well as many other properties of metals.

Simple cubic

Figure 12.2

Body-centered cubic

Face-centered cubic

The three types of unit cell of the cubic lattice.

5. In covalent network solids, covalent bonds join atoms together in the crystal lattice, which is quite large. Graphite, diamond, and silicon dioxide (SiO2) are examples of network solids. The crystal is one giant molecule.

Phase Diagrams The equilibrium that exists between a liquid and its vapor is just one of several that can exist between states of matter. A phase diagram is a graph representing the relationship of a substance’s states of matter to temperature and pressure. The diagram allows us to predict which state of matter a substance will assume at a certain combination of temperature and pressure. Figure 12.4 shows a general form of the phase diagram.

Solids, Liquids, and Intermolecular Forces Í 171 +

−

Na+ −

Cl− +

−

+

−

+ −

+

+

−

+ −

−

+ −

− +

−

+ +

−

+

−

−

+ +

− +

− +

+ +

−

− +

−

Figure 12.3

Sodium chloride crystal lattice.

Note that the diagram has three general areas corresponding to the three states of matter––solid, liquid, and gas. The line from A to C represents the solid’s change in vapor pressure with changing temperature, for the sublimation equilibrium. The A-to-D line represents the variation in the melting point with varying pressure. The A-to-B line represents the variation of a liquid’s vapor pressure with varying pressure. The B point shown on this phase diagram is called the critical point of the substance, the point beyond which the gas and liquid phases are indistinguishable from each other. At or beyond this critical point, no matter how much pressure is applied, the gas cannot be condensed into a liquid. Point A is the substance’s triple point, the combination of temperature and pressure at which all three states of matter can exist together. The phase diagram for water is shown in Figure 12.5. For each of the phase transitions, there is an associated enthalpy change or heat of transition. For example, there are heats of vaporization, fusion, sublimation, and so on.

Relationship of Intermolecular Forces to Phase Changes The intermolecular forces can affect phase changes to a great degree. The stronger the intermolecular forces present in a liquid, the more kinetic energy must be added to convert it into a gas. Conversely, the stronger the intermolecular forces between the gas particles, the easier it will be to condense the gas into a liquid. In general, the weaker the intermolecular forces, the higher the vapor pressure. The same type of reasoning can be used about the other phase equilibria, in general, the stronger the intermolecular forces, the higher the heats of transition. Example: Based on intermolecular forces, predict which will have the higher vapor pressure and higher boiling point, water or dimethyl ether, CH3–O–CH3.

172 U Step 4. Review the Knowledge You Need to Score High Critical B point

D

Fusion (Melting)

Liquid

Freezing Pressure

Solid Vaporization Condensation

Gas

A Triple point

Sublimation C

Deposition Temperature

Figure 12.4

A phase diagram.

Critical point (374°C, 218 atm)

LIQUID

Pressure (atm)

SOLID

1.0 Triple point (0.01°C, 0.006 atm) GAS

−1

100

Temperature (°C)

Figure 12.5

Phase diagram for H2O.

Answer: Dimethyl ether will have the higher vapor pressure and the lower boiling point. Explanation: Water is a polar substance with strong intermolecular hydrogen bonds. Dimethyl ether is a polar material with weaker intermolecular forces (dipole–dipole). It will


take much more energy to vaporize water, thus, water has a lower vapor pressure and higher boiling point.


The concept of intermolecular forces is important in the separation of the components of a mixture. Experiment 18 in the Experimental chapter utilizes this concept.


1. Don’t confuse the various types of intermolecular forces. 2. The melting point and the freezing point are identical. 3. Hydrogen bonding can occur only when a hydrogen atom is directly bonded to an N, O, or F atom. 4. When moving from point to point in a phase diagram, pay attention to which phase transitions the substance exhibits. 5. In looking at crystal lattice diagrams, be sure to count all the particles, in all three dimensions, that surround another particle.

U Review Questions Answer the following questions. You have 20 minutes, and you may not use a calculator. You may use the periodic table at the back of this book. Choose from the following descriptions of solids for questions 1–4. (A) composed of macromolecules held together by strong bonds (B) composed of atoms held together by delocalized electrons (C) composed of positive and negative ions held together by electrostatic attractions (D) composed of molecules held together by intermolecular dipole–dipole interactions (E) composed of molecules held together by intermolecular London forces 1. Fe(s) 2. KNO3(s) 3. SiO2(s) 4. HCl(s)

For questions 5 and 6 choose from the following. (A) (B) (C) (D) (E)

an ionic solid a metallic solid a molecular solid containing nonpolar molecules a covalent network solid a molecular solid containing polar molecules

5. Diamond, C(s) 6. Solid sulfur dioxide, SO2(s)

174 U Step 4. Review the Knowledge You Need to Score High 7. The approximate boiling points for hydrogen compounds of some elements in the nitrogen family are: (SbH3 15°C), (AsH3 –62°C), (PH3 –87°C), and (NH3 –33°C). The best explanation for the fact that NH3 does not follow the trend of the other hydrogen compounds is (A) NH3 is the only one to exhibit hydrogen bonding (B) NH3 is the only one that is water-soluble (C) NH3 is the only one that is nearly ideal in the gas phase (D) NH3 is the only one that is a base (E) NH3 is the only one that is nonpolar 8. The critical point is (A) the highest temperature and pressure where the substance may exist as discrete liquid and gas phases (B) the temperature and pressure where the substance exists in equilibrium as solid, liquid, and gas phases (C) the highest temperature and pressure where a substance can sublime (D) the highest temperature and pressure where the substance may exist as discrete liquid and solid phases (E) the highest temperature and pressure where the substance may exist as discrete solid and gas phases 9. For all one-component phase diagrams, choose the correct statement from the following list. (A) The line separating the gas from the liquid phase may have a positive or negative slope. (B) The line separating the solid from the liquid phase may have a positive or negative slope. (C) The line separating the solid from the liquid phase has a positive slope. (D) The temperature at the triple point is the same as at the freezing point. (E) The triple point is at a pressure above 1 atm.

Choose the appropriate answer from the following list for questions 10 and 11. (A) (B) (C) (D) (E)

London dispersion forces covalent bonding hydrogen bonding metallic bonding ionic bonding

10. This is the reason why argon may be solidified at a sufficiently low temperature. 11. This is the reason why diamond is so hard. 12. The triple point (A) represents the highest pressure at which the liquid can exist (B) is the lowest pressure at which the liquid can exist (C) represents the lowest temperature at which the vapor can exist (D) is 0.15 K higher than the melting point of the solid (E) is at a pressure of 1 atm 13. A sample of a pure liquid is placed in an open container and heated to the boiling point. Which of the following may increase the boiling point of the liquid? I. The size of the container is increased. II. The container is sealed. III. A vacuum is created over the liquid. (A) II and III (B) and III (C) III only (D) II only (E) I only 14. Which of the following best explains why 1-butanol, CH3CH2CH2CH2OH, has a higher surface tension than its isomer, diethyl ether, CH3CH2OCH2CH3? (A) (B) (C) (D) (E)

the higher density of 1-butanol the lower specific heat of 1-butanol the lack of hydrogen bonding in 1-butanol the higher molecular mass of 1-butanol the presence of hydrogen bonding in 1-butanol


15. Pick the answer that most likely represents the substances’ relative solubilities in water. <
7 15. A buffer with a pH < 7 −

16. Determine the OH (aq) concentration in 1.0 M aniline (C6H5NH2) solution. (Kb for aniline is −10 4.0 × 10 .) −5 (A) 2.0 × 10 M −10 (B) 4.0 × 10 M −6 (C) 3.0 × 10 M −7 (D) 5.0 × 10 M 0 (E) 1.0 × 10 M

Equilibrium Í 233

17. A student wishes to reduce the zinc ion concentra−6 tion in a saturated zinc iodate solution to 1 × 10 M. How many moles of solid KIO3 must be added −6 to 1.00 liter of solution? (Ksp Zn(IO3)2 = 4 × 10 at 25°C) (A) 1 mol (B) 0.5 mol (C) 0.0001 mol (D) 4 mol (E) 2 mol 18. At constant temperature, a change in volume will NOT affect the moles of substances present in which of the following? (A) H2(g) + I2(g) 2HI(g) (B) CO(g) + Cl2(g) COCl2(g) (C) PCl5(g) PCl3(g) + Cl2(g) (D) N2(g) + 3 H2(g) 2 NH3(g) (E) CH4(g) + CO2(g) 2 CO(g) + 2 H2(g) 19. The equilibrium constant for the hydrolysis of 2− C2O4 is best represented by which of the following? − 2− − (A) K = [OH ][C2O4 ]/[HC2O4 ] + − (B) K = [H3O ][C2O2− 4 ]/[HC2O4 ] − − 2− (C) K = [HC2O4 ][OH ]/[C2O4 ] − − (D) K = [C2O2− 4 ]/[HC2O4 ][OH ] + − (E) K = [C2O2− 4 ]/[HC2O4 ][H3O ] − 20. IO3 + HC2H3O2 HIO3 + C2H3O−2

The above equation has an equilibrium constant that is less than 1. What are the relative strengths of the acids and bases? ACIDS

BASES

A.

HIO3 < HC2H3O2

IO3− < C2H3O2−

B.

HIO3 < HC2H3O2

IO−3 > C2H3O−2

C.

HIO3 > HC2H3O2

IO3− > C2H3O2−

D.

HIO3 > HC2H3O2

IO3− < C2H3O−2

E.

HIO3 = HC2H3O2

IO3− = C2H3O2−

21. ZnS(s) + 2H+(aq) Zn2+(aq) + H2S(aq) What is the equilibrium constant for the above reaction? The successive acid dissociation con−8 −19 stants for H2S are 9.5 × 10 (Ka1) and 1 × 10 (Ka2). Ksp, the solubility product constant, for −24 ZnS equals 1.6 × 10 . −24 −8 (A) 1.6 × 10 /9.5 × 10 (B) 1 × 10−79/1.6 × 10−24 (C) 9.5 × 10−27/1.6 × 10−24 (D) 9.5 × 10−8/1.6 × 10−24 (E) 1.6 × 10−24/9.5 × 10−27 −

22. H2PO4− + H2O H3O+ + HPO42

Which species, in the above equilibrium, behave as bases? 2− I. HPO4 II. H2PO−4 III. H2O (A) I only (B) I and II (C) II and III (D) I and III (E) III only 23. H2C3H2O4 + 2 H2O 2 H3O+ + C3H2O42− As shown above, malonic acid is a diprotic acid. The successive equilibrium constants are 1.5 × −3 −6 10 (Ka1) and 2.0 × 10 (Ka2). What is the equilibrium constant for the above reaction? −14 (A) 1.0 × 10 (B) 2.0 × 10−6 (C) 4.0 × 10−12 (D) 3.0 × 10−9 (E) 1.5 × 10−3 24. C(s) + H2O(g) CO(g) + H2O(g) endothermic An equilibrium mixture of the reactants is placed in a sealed container at 150°C. The amount of the products may be increased by which of the following changes? I. raising the temperature of the container II. increasing the volume of the container III. adding 1 mol of C(s) to the container (A) II only (B) I and II (C) I only (D) II and III (E) III only

234 U Step 4. Review the Knowledge You Need to Score High 25. C2H4(g) + 3 O2(g) 2 CO2(g) + 2 H2O(g) An equal number of moles of each of the reactants are sealed in a container and allowed to come to the equilibrium shown above. At equilibrium which of the following must be true? I. [CO2] must equal [H2O] II. [O2] must be less than [C2H4] III. [CO2] must be greater than [C2H4] (A) II and III (B) I only (C) III only (D) II only (E) I and II 26. CH4(g) + CO2(g) 2 CO(g) + 2 H2(g) A 1.00-L flask is filled with 0.30 mol of CH4 and 0.40 mol of CO2, and allowed to come to equilibrium. At equilibrium, there are 0.20 mol of CO in the flask. What is the value of Kc, the equilibrium constant, for the reaction? (A) 1.2 (B) 0.027 (C) 0.30 (D) 0.060 (E) 3.0 27. NO2(g) 2NO(g) + O2(g) The above materials were sealed in a flask and allowed to come to equilibrium at a certain temperature. A small quantity of O2(g) was added to the flask, and the mixture allowed to return to equilibrium at the same temperature. Which of the following has increased over its original equilibrium value? (A) the quantity of NO2(g) present (B) the quantity of NO(g) present (C) the equilibrium constant, K (D) the rate of the reaction (E) the partial pressure of NO(g)

28. 2CH4(g) + O2(g) 2CO(g) + 4H2(g) ΔH < 0 In order to increase the value of the equilibrium constant, K, which of the following changes must be made to the above equilibrium? (A) increase the temperature (B) increase the volume (C) decrease the temperature (D) add CO(g) (E) add a catalyst − 29. HC3H5O2(aq) + HCOO (aq) HCOOH(aq) − + C3H5O2 (aq)

The equilibrium constant, K, for the above equi−2 librium is 7.2 × 10 . This value implies which of the following? (A) A solution with equimolar amounts of − HC3H5O2(aq) and HCOO (aq) is neutral. − − (B) C3H5O2 (aq) is a stronger base than HCOO (aq). (C) HC3H5O2(aq) is a stronger acid than HCOOH(aq). − − (D) HCOO (aq) is a stronger base than C3H5O2 (aq). (E) The value of the equilibrium does not depend on the temperature. 30. The addition of nitric acid increases the solubility of which of the following compounds? (A) KCl(s) (B) Pb(CN)2(s) (C) Cu(NO3)2(s) (D) NH4NO3(s) (E) FeSO4(s) −13 31. The Ksp for Mn(OH)2 is 1.6 × 10 . What is the molar solubility of this compound in water?

(A)

3

4.0 × 10−14

(B) 1.6 × 10

−13

(C)

3

4.0 × 10−13

(D)

2

4.0 × 10−14

(E) 4.0 × 10−14

Equilibrium Í 235

U Answers and Explanations 1. B—An acid, any acid, will give a pH below 7; thus, answers C–E are eliminated. A 0.1-molar solution of a strong acid would have a pH of 1. Acetic acid is not a strong acid, so answer A is eliminated. −8

2. A—The K nearest 10 will give a pH near 8. The answer must involve the H2PO4− ion. 3. C—The generic Ka is: + − −4 2 Ka = [H ][A ]/[HA] = 9 × 10 = x /1.0 − x −2

x = 3 × 10 M and the percent dissociation is −2 (3 × 10 /1.0) × 100% = 3% You will need to be able to do calculations at this level without a calculator. 4. D—The two substances are not a conjugate acid–base pair, so this is not a buffer. Both compounds are salts of a strong base and a weak acid; such salts are basic (pH > 7). 5. C—The two substances constitute a conjugate acid–base pair, so this is a buffer. The pH should be near −log Ka1. This is about 2 (acid). 6. E—The two substances constitute a conjugate acid–base pair, so this is a buffer. The pOH should be near −log Kb. This is about 4. The pH would be about 14 − 4 = 10. 7. B—Any time an acid is added, the pH will drop. The reaction of the weak base with the acid produces the conjugate acid of the weak base. The combination of the weak base and its conjugate is a buffer, so the pH will not change very much until all the base is used. After all the base has reacted, the pH will drop much more rapidly. The equivalence point of a weak base–strong acid titration is always below 7 (only strong base–strong acid titrations will give a pH of 7 at the equivalence point). The value of pOH is equal to pKb half-way to the equivalence point. + −4 − 8. E—If pH = 4.0, then [H ] = 1 × 10 = [A ], and −4 + − [HA] = 0.30 − 1 × 10 . The generic Ka is [H ][A ]/ [HA], and when the values are entered into this −4 2 −8 equation: (1 × 10 ) /0.30 = 3.3 × 10 . Since you can estimate the answer, no actual calculations need be done.

9. A—This is an acid-dissociation constant, thus the solution must he acidic (pH < 7). The pH of a 0.010 M strong acid would be 2.0. This is not a strong acid, so the pH must be above 2. 10. A—A is the salt of a strong acid and a weak base; it is acidic. B and E are salts of a strong acid and a strong base; they are neutral. C and D are salts of a weak acid and a strong base; they are basic. The lowest pH would be the acidic choice. 11. E—Sodium nitrite is a salt of a weak acid and a + strong base. Ions from strong bases, Na in this case, do not undergo hydrolysis, and do not affect − the pH. Ions from weak acids, NO2 in this case, undergo hydrolysis to produce basic solutions. 12. B—The presence of a strong acid, HNO3, would make this the most acidic (lowest pH). 13. E—The weak acid and the weak base partially cancel each other to give a nearly neutral solution. 14. C—Both A and C are buffers, because they have conjugate acid–base pairs of either a weak acid (A) or a weak base (C). The weak acid buffer would have a pH below 7, and the weak base buffer would have a pH above 7. 15. A—See the answer to question 14. 16. A—The equilibrium constant expression is: Kb = −10 − 4.0 × 10 = [OH ][C6H5NH+3 ]/[C6H5NH2]. This expression becomes: (x)(x)/(1.0 − x) = 4.0 × −10 2 −10 10 , which simplifies to: x /1.0 = 4.0 × 10 . Taking the square root of each side gives: x = −5 − 2.0 × 10 = [OH ]. Since you can estimate the answer, no actual calculations need be done. 17. E—The solubility-product constant expression 2+ −6 − 2 is: Ksp = [Zn ][IO3 ] = 4 × 10 . This may be −6 2+ − 2 rearranged to: [IO3 ] = 4 × 10 /[Zn ]. Inserting the desired zinc ion concentration −6 −6 − 2 gives: [IO3 ] = 4 × 10 /(1 × 10 ) = 4. Taking the square root of each side leaves a desired IO3− concentration of 2 M. 2 mol of KIO3 must be added to 1.00 L of solution to produce this concentration. Since you can estimate the answer, no actual calculations need be done.

236 U Step 4. Review the Knowledge You Need to Score High 18. A—When dealing with gaseous equilibria, volume changes are important when there is a difference in the total number of moles of gas on opposite sides of the equilibrium arrow. All the answers, except A, have differing numbers of moles of gas on opposite sides of the equilibrium arrow. 19. C—Hydrolysis of any ion begins with the interaction of that ion with water. Thus, both the ion and water must be on the left side of the equilibrium arrow, and hence in the denominator of the equilibrium-constant expression (water, as with all solvents, will be left out of the expression). The oxalate ion is the conjugate base of a weak acid. As − a base it will produce OH in solution along with the conjugate acid (HC2O4−) of the base. The equilibrium reaction is: C2O42−(aq) + H2O(l) − − OH (aq) + HC2O4 (aq). 20. D—The low value for the equilibrium constant means that the equilibrium lies to the left. For this to be true, the weaker acid and the weaker base must be on the left side. 21. E—The equilibrium given is actually the sum of the following three equilibria: 2+ 2− ZnS(s) Zn (aq) + S (aq)

Ksp = 1.6 × 10

−24

S2−(aq) + H+(aq) HS−(aq) –9 K = 1/Ka2 + 1/1 × 10 HS−(aq) + H+(aq) H2S(aq) –8 K ′ = 1/Ka1 + 1/9.5 × 10 Summing these equations means you need to multiply the equilibrium constants: Ksum = KspKK′ = Ksp/Ka2Ka1 = 1.6 × 10−24/[(1 × 10−19) (9.5 × 10−8)] 22. D—As the reaction moves to the left, the H2O + behaves as a base (accepts H ). When the reaction 2− moves to the right, HPO4 behaves as a base. 23. D—The equilibrium constant for the two successive ionizations will be the product of the two equilibrium constants given. Thus, K = Ka1Ka2 = −3 −6 (1.5 × 10 )(2.0 × 10 ). 24. B—The addition or removal of some solid, as long as some remains some present, will not change the equilibrium. An increase in volume

will cause the equilibrium to shift towards the side with more moles of gas (right). Raising the temperature of an endothermic process will shift the equilibrium to the right. Any shift to the right will increase the amounts of the products. 25. E—Assuming 1 mol of each reactant is used, the equilibrium quantities would be: [C2H4] = 1 − x, [O2] = 1 − 3x, [CO2] = 2x, and [H2] = 2x. Unless the value of x is known, it is not possible to relate the actual concentrations of any reactant to any product. 26. B—Using the following table: [CH4]

[CO2]

[CO]

[H2]

Initial

0.30

0.40

0

0

Change

−x

−x

+2x

+2x

0.40 − x

2x

2x

Equilibrium 0.30 − x

The presence of 0.20 mol of CO (0.20 M) at equilibrium means that 2x = 0.20 and that x = 0.10. Using this value for x, the bottom line of the table becomes: [CH4]

Equilibrium 0.20

[CO2]

[CO]

[H2]

0.30

0.20

0.20

The equilibrium expression is: K = 2 2 [CO] [H2] /[CH4][CO2]. Entering the equilibrium values into the equilibrium expression gives: 2 2 K = (0.20) (0.20) /(0.20)(0.30) 27. A—The addition of a product will cause the equilibrium to shift to the left. The amounts of all the reactants will increase, and the amounts of all the products will decrease (the O2 will not go below its earlier equilibrium value since excess was added). The value of K is constant, unless the temperature is changed. The rates of the forward and reverse reactions are equal at equilibrium. 28. C—The only way to change the value of K is to change the temperature. For an exothermic process (ΔH < 0), K is increased by a decrease in temperature.

Equilibrium Í 237

29. B—The low value of K means that the equilibrium lies to the left. The equilibrium always lies away from the stronger acid and the stronger base.

31. A—The equilibrium constant expression for the dissolving of manganese(II) hydroxide is: 2+ − 2 −13 Ksp = [Mn ][OH ] = 1.6 × 10

If s is used to indicate the molar solubility, the equilibrium expression becomes:

30. B—Nitric acid, being an acid, will react with a base. In addition to obvious bases containing − OH , the salts of weak acids are also bases. All of − the anions, except CN , are from strong acids.

2 3 −13 Ksp = (s)(2s) = 4s = 1.6 × 10

This rearranges to: s = 3 K/4

U Free-Response Questions You have 15 minutes. You may use a calculator and the tables at the back of the book. CdI 4 (aq ) Cd 2+ (aq ) + 4I− (aq ) 2−

An aqueous solution is prepared that is initially 0.100 M in CdI42−. After equilibrium is 2+ established, the solution is found to be 0.013 M in Cd . a. Derive the expression for the dissociation constant, Kd, and determine the value of the constant. b. What will be the cadmium ion concentration arising when 0.400 mol of KI is added to 1.00 L of the solution in part a? c. A solution is prepared by mixing 0.500 L of the solution from part b and 0.500 L of −5 2.0 × 10 M NaOH. Will cadmium hydroxide, Cd(OH)2, precipitate? The Ksp for −14 cadmium hydroxide is 2.2 × 10 . d. When the initial solution is heated, the cadmium ion concentration increases. Is the equilibrium an exothermic or an endothermic process? Explain how you arrived at your conclusion.

U Answers and Explanations a. Kd + [Cd2+][I−]4/[CdI42−] Give yourself 1 point for this expression. Using the following table: 2−

CdI4 (aq) Initial 0.100 M Change −x Equilibrium 0.100 − x

Cd2+(aq) 0 +x x

−

I (aq) 0 +4x 4x

2+ The value of [Cd ] is given (= 0.013), and this is x. This changes the last line of the table to: 2−

CdI4 (aq) Equilibrium 0.100 − x = 0.087

Cd2+(aq) x = 0.013

−

I (aq) 4x = 0.052

238 U Step 4. Review the Knowledge You Need to Score High Entering these values into the Kd expression gives: (0.013)(0.052)4/(0.087) = 1.1 × 10−6. Give yourself 1 point for this answer. You can also get 1 point if you correctly put your values into the wrong equation. b. The table in part a changes to the following: 2−

CdI4 (aq) Initial 0.100 M Change −x Equilibrium 0.100 − x

Cd2+(aq) 0 +x x

−

I (aq) 0.400 + 4x 0.400 + 4x

2+ 4 −6 4 2− Kd = [Cd ][I] /[CdI4 ] = 1.1 × 10 = (x)(0.400 + 4x) /(0.100 − x) 4 = (x)(0.400) /(0.100) −6 2+ x = 4.3 × 10 M = [Cd ]

Give yourself 1 point for the correct setup and 1 point for the correct answer. If you got the wrong K in part a, you can still get one or both points for using it correctly. c. The equilibrium is Cd(OH)2 Cd2+(aq) + 2 OH−(aq) 2+ − The dilution reduces both the Cd and OH concentration by a factor of 2. This gives: 2+ −6 −6 − −5 −5 [Cd ] = 4.3 × 10 /2 = 2.2 × 10 and [OH ] = 2.0 × 10 /2 = 1.0 × 10 The reaction quotient is: Q = [Cd2+][OH−2] = (2.2 × 10−6)(1.0 × 10−5)2 = 2.2 × 10−16

This value is less than Ksp, so no precipitate will form. Give yourself 1 point for a correct calculation, and another point for the correct con2+ clusion. If you correctly use a wrong [Cd ] you calculated in part b, you can still get both points. d. Since the cadmium ion concentration increases, the equilibrium must shift to the right. Endothermic processes shift to the right when they are heated. This is in accordance ^ with Le Cha telier’s principle. Give yourself 1 point for endothermic. Give yourself 1 point for mentioning Le ^ Cha telier’s principle. Your score is based on a total of 8 points. Subtract one point if any answer has an incorrect number of significant figures.

U Rapid Review G

G

G

A chemical equilibrium is established when two exactly opposite reactions occur in the same container at the same time and with the same rates of reaction. At equilibrium the concentrations of the chemical species become constant, but not necessarily equal. For the reaction aA + bB cC + dD, the equilibrium constant expression would be: [C ]c [D]d . Know how to apply this equation. Kc = [ A ]a [B]b

Equilibrium Í 239 G

G

G

G

Le Cha^ telier’s principle says that if an equilibrium system is stressed, it will reestablish equilibrium by shifting the reactions involved. A change in concentration of a species will cause the equilibrium to shift to reverse that change. A change in pressure or temperature will cause the equilibrium to shift to reverse that change. Strong acids completely dissociate in water, whereas weak acids only partially dissociate. Weak acids and bases establish an equilibrium system. Under the Brønsted–Lowry acid–base theory, acids are proton (H+) donors and bases are proton acceptors.

G

Conjugate acid–base pairs differ only in a single H+; the one that has the extra H+ is the acid.

G

The equilibrium for a weak acid is described by Ka, the acid dissociation constant. It has the form: K = a

G

G

G

G

G

[H3O+ ][ A − ] . Know how to apply this equation.

[HA ] Most times the equilibrium concentration of the weak acid, [HA], can be approximated by the initial molarity of the weak acid. Knowing Ka and the initial concentration of the weak acid allows the calculation of the + [H ]. Water is an amphoteric substance, acting either as an acid or a base.

The product of the [H+] and [OH−] in a solution or in pure water is a constant, Kw, −14 + − −14 called the water dissociation constant, 1.0 × 10 . Kw = [H ] [OH ] = 1.0 × 10 at 25°C. Know how to apply this equation. The pH is a measure of the acidity of a solution. pH = −log[H+]. Know how to apply + this equation and estimate the pH from the [H ].

G

On the pH scale 7 is neutral; pH > 7 is basic; and pH < 7 is acidic.

G

pH + pOH = pKw = 14.00. Know how to apply this equation.

G

G

G

G

+ − Kb is the ionization constant for a weak base. K = [HB ][OH ] . Know how to b [HB] apply this equation.

Ka × Kb = Kw for conjugate acid–base pairs. Know how to apply this equation. Buffers are solutions that resist a change in pH by neutralizing either an added acid or an added base. The Henderson–Hasselbalch equation allows the calculation of the pH of a buffer [A− ] . Know how to apply this equation. [HA ] The buffer capacity is a quantitative measure of the ability of a buffer to resist a change in pH. The more concentrated the acid–base components of the buffer, the higher its buffer capacity. solution: pH = p K a + log

G

G

A titration is a laboratory technique to determine the concentration of an acid or base solution.


G

G

G

An acid–base indicator is used in a titration and changes color in the presence of an acid or base. The equivalence point or endpoint of a titration is the point at which an equivalent amount of acid or base has been added to the base or acid being neutralized. Know how to determine the pH at any point of an acid–base titration. The solubility product constant, Ksp, is the equilibrium constant expression for sparingly soluble salts. It is the product of the ionic concentration of the ions, each raised to the power of the coefficient of the balanced chemical equation.

G

Know how to apply ion-products and Ksp values to predict precipitation.

G

Formation constants describe complex ion equilibria.

CHAPTER

16

Electrochemistry IN THIS CHAPTER: Summary: Electrochemistry is the study of chemical reactions that produce electricity, and chemical reactions that take place because electricity is supplied. Electrochemical reactions may be of many types. Electroplating is an electrochemical process. So are the electrolysis of water, the production of aluminum metal, and the production and storage of electricity in batteries. All these processes involve the transfer of electrons and redox reactions. Keywords and Equations KEY IDEA

A table of half-reactions is given in the exam booklet and in the back of this book. I = current (amperes) q = charge (coulombs) E ° = standard reduction potential K = equilibrium constant G ° =standard free energy Faraday’s constant, F = 96,500 coulombs per mole of electrons −1 –1 Gas constant, R = 8.31 volt coulomb mol K

q I=t

logK =

nE ° 0.0592

ΔG ° = −nFE °

⎛ RT ⎞ ⎛ 0.0592 ⎞ E cell = E °cell − ⎜ ⎟lnQ = E °cell − ⎜ ⎟log Q at 25°C ⎝ nF ⎠ ⎝ n ⎠ [C]c [D]d where a A + bB → c C + dD Q= [A]a [B]b

Í 241


Redox Reactions Electrochemical reactions involve redox reactions. In the chapter on Reactions and Periodicity we discussed redox reactions, but here is a brief review: Redox is a term that stands for reduction and oxidation. Reduction is the gain of electrons, and oxidation is the loss of electrons. For example, suppose a piece of zinc metal is placed in a solution 2+ containing Cu . Very quickly, a reddish solid forms on the surface of the zinc metal. That substance is copper metal. At the molecular level the zinc metal is losing electrons 2+ 2+ to form Zn and Cu is gaining electrons to form copper metal. These two processes can be shown as: 2+ − Zn(s) → Zn (aq) + 2e

(oxidation)

2+ − Cu (aq) + 2e → Cu(s)

(reduction)

The electrons that are being lost by the zinc metal are the same electrons that are being gained by the cupric ion. The zinc metal is being oxidized, and the cupric cation is being reduced. Something must cause the oxidation (taking of the electrons), and that substance is called the oxidizing agent (the reactant being reduced). In the example above, the oxidizing 2+ agent is Cu . The reactant undergoing oxidation is called the reducing agent, because it is furnishing the electrons used in the reduction half-reaction. Zinc metal is the reducing agent above. The two half-reactions, oxidation and reduction, can be added together to give you the overall redox reaction. The electrons must cancel—that is, there must be the same number of electrons lost as electrons gained: 2+

–

−

2+

Zn(s) + Cu (aq) + 2e → Zn (aq) + 2e + Cu(s) 2+

or

2+

Zn(s)+Cu (aq) → Zn (aq) + Cu(s) In these redox reactions, like the electrochemical reactions we will show you, there is a simultaneous loss and gain of electrons. In the oxidation reaction (commonly called a halfreaction) electrons are being lost, but in the reduction half-reaction those very same electrons are being gained. So, in redox reactions electrons are being exchanged as reactants are being converted into products. This electron exchange may be direct, as when copper metal plates out on a piece of zinc, or it may be indirect, as in an electrochemical cell (battery). In this chapter, we will show you both processes and the calculations associated with each. The balancing of redox reactions is beginning to appear on the AP exam, so we have included the half-reaction method of balancing redox reactions in the Appendix, just in case you are having trouble with the technique in your chemistry class. The definitions for oxidation and reduction given above are the most common and the most useful ones. A couple of others might also be useful: Oxidation is the gain of oxygen or loss of hydrogen and involves an increase in oxidation number. Reduction is the gain of hydrogen or loss of oxygen and involves a decrease in oxidation number.

Electrochemical Cells In the example above, the electron transfer was direct, that is, the electrons were exchanged directly from the zinc metal to the cupric ions. But such a direct electron transfer doesn’t allow for any useful work to be done by the electrons. Therefore, in order to use these electrons, indirect electron transfer must be done. The two half-reactions are physically separated and connected by a wire. The electrons that are lost in the oxidation half-reaction are allowed to flow through the wire to get to the reduction half-reaction. While those electrons

Electrochemistry Í 243 Wire

Anode (oxidation)

NO3−

e− Zn

Cathode (reduction)

Salt bridge

(–)

Anode compartment

e− K+

Zn2+ SO42−

Cu

(+)

Cu2+

Cathode compartment

SO42−

Zn(s)→ Zn2+ + 2 e−

Figure 16.1

Cu2+ + 2 e− → Cu(s)

A galvanic cell.

are flowing through the wire they can do useful work, like powering a calculator or a pacemaker. Electrochemical cells use indirect electron transfer to produce electricity by a redox reaction, or they use electricity to produce a desired redox reaction.

Galvanic (Voltaic) Cells Galvanic (voltaic) cells produce electricity by using a redox reaction. Let’s take that zinc/copper redox reaction that we studied before (the direct electron transfer reaction) and make it a galvanic cell by separating the oxidation and reduction half-reactions. (See Figure 16.1.) Instead of one container, as before, two will be used. A piece of zinc metal will be placed in one, a piece of copper metal in another. A solution of aqueous zinc sulfate will be added to the beaker containing the zinc electrode and an aqueous solution of copper(II) sulfate will be added to the beaker containing the copper metal. The zinc and copper metals will form the electrodes of the cell, the solid portion of the cell that conducts the electrons involved in the redox reaction. The solutions in which the electrodes are immersed are called the electrode compartments. The electrodes are connected by a wire and . . . nothing happens. If the redox reactions were to proceed, the beaker containing the zinc metal would build up a positive charge due to the zinc cations being produced in the oxidation half-reaction. The beaker containing the copper would build up a negative charge due to the loss of the copper(II) ions. The solutions (compartments) must maintain electrical neutrality. To accomplish this, a salt bridge will be used. A salt bridge is often an inverted U-tube that holds a gel containing a concentrated electrolyte solution, such as KNO3 in this example. Any electrolyte could be used as long as it does not interfere with the redox reaction. The anions in the salt bridge will migrate through the gel into the beaker containing the zinc metal, and the salt-bridge cations will migrate in the opposite direction. In this way electrical neutrality is maintained. In electrical terms, the circuit has been completed and the redox reaction can occur. The zinc electrode is being oxidized in one beaker, and the copper(II) ions in the other beaker are being reduced to copper metal. The same redox reaction is happening in this indirect electron transfer as happened in the direct one: Zn(s) + Cu 2+ (aq) → Zn 2+ (aq) + Cu(s) The difference is that the electrons are now flowing through a wire from the oxidation halfreaction to the reduction half-reaction. And electrons flowing through a wire is electricity,


TIP

which can do work. If a voltmeter was connected to the wire connecting the two electrodes, a current of 1.10 V would be measured. This galvanic cell shown in Figure 16.1 is commonly called a Daniell cell. In the Daniell cell shown in Figure 16.1 note that the compartment with the oxidation half-reaction is on the left and the compartment undergoing reduction is on the right. This is a convention that you will have to follow. The AP graders look for this. The electrode at which oxidation is taking place is called the anode, and the electrolyte solution in which it is immersed is called the anode compartment. The electrode at which reduction takes place is called the cathode, and its solution is the cathode compartment. The anode is labeled with a negative sign (−), while the cathode has a positive sign (+). The electrons flow from the anode to the cathode. Remember: Oxidation is an anode process.

KEY IDEA

Sometimes the half-reaction(s) involved in the cell lack a solid conductive part to act as the electrode, so an inert (inactive) electrode, a solid conducting electrode that does not take part in the redox reaction, is used. Graphite and platinum are commonly used as inert electrodes. Note: The electrode must be a conductor on to which a wire may be attached. It can never be an ion in solution.

Cell Notation Cell notation is a shorthand notation representing a galvanic cell. To write the cell notation in Figure 16.1: 1. Write the chemical formula of the anode: Zn(s) 2. Draw a single vertical line to represent the phase boundary between the solid anode and the solution: Zn(s) | 3. Write the reactive part of the anode compartment with its initial concentration (if known) 2+ in parentheses (assume 1M in this case): Zn(s) Zn (1M) 4. Draw a double vertical line to represent the salt bridge connecting the two electrode compartments: Zn(s) Zn 2+ (1M) 5. Write the reactive part of the cathode compartment with its initial concentration (if known) shown in parentheses: Zn(s) Zn 2+ (1M) Cu 2+ (1M) 6. Draw a single vertical line representing the phase boundary between the solution and the solid cathode: Zn(s) Zn 2+ (1M) Cu 2+ (1M) 7. Finally, write the chemical formula of the cathode: Zn(s) Zn 2+ (1M) Cu 2+ (1M) Cu(s) If an inert electrode is used because one or both redox half-reactions do not have a suitable conducting electrode material associated with the reaction, the inert electrode is shown with its phase boundary. If the electrode components are in the same phase, they are separated by commas; if not, a vertical phase boundary line. For example, consider the following redox reaction: Ag + (aq ) + Fe 2+ (aq ) → Fe 3+ (aq ) + Ag(s) The oxidation of the ferrous ion to ferric doesn’t involve a suitable electrode material, so an inert electrode, such as platinum, would be used. The cell notation would then be: Pt(s)|Fe 2+ (aq),Fe 3+ (aq) Ag + (aq) Ag(s)

Electrochemistry Í 245

Cell Potential In the discussion of the Daniell cell we indicated that this cell produces 1.10 volts. This voltage is really the difference in potential between the two half-cells. There are half-cell potentials associated with all half-cells A list of all possible combinations of half-cells would be tremendously long. Therefore, a way of combining desired half-cells has been developed. The cell potential (really the half-cell potentials) depends on concentration and temperature, but initially we’ll simply look at the half-cell potentials at the standard temperature of 298 K (25°C) and all components in their standard states (1 M concentration of all solutions, 1 atmosphere pressure for any gases, and pure solid electrodes). All the half-cell potentials are tabulated as the reduction potentials, that is, the potentials associated with the reduction reaction. The hydrogen half-reaction has been defined as the standard and has been given a value of exactly 0.00 V. All the other half-reactions have been measured relative to it, some positive and some negative. The table of standard reduction potentials provided on the AP exam is shown in Table 16.1 and in the back of this book. Here are some things to be aware of in looking at this table: KEY IDEA G

G

G

All reactions are shown in terms of the reduction reaction relative to the standard hydrogen electrode. The more positive the value of the voltage associated with the half-reaction (E °), the more readily the reaction occurs. The strength of the oxidizing agent increases as the value becomes more positive, and the strength of the reducing agent increases as the value becomes more negative.

This table of standard reduction potentials can be used to write the overall cell reaction and to calculate the standard cell potential, E ° the potential (voltage) associated with the cell at standard conditions. There are a few things to remember when using these standard reduction potentials to generate the cell reaction and cell potential: 1. The standard cell potential for a galvanic cell is a positive value, E ° > 0. 2. Because one half-reaction must involve oxidation, one of the half-reactions shown in the table of reduction potentials must be reversed to indicate the oxidation. If the half-reaction is reversed, the sign of the standard reduction potential must be reversed. However, this is not necessary to calculate the standard cell potential. 3. Because oxidation occurs at the anode and reduction at the cathode, the standard cell potential can be calculated from the standard reduction potentials of the two half-reactions involved in the overall reaction by using the equation: E ° cell = E °cathode − E ° anode > 0 But remember, both E °cathode and E °anode are shown as reduction potentials, used directly from the table without reversing. Once the standard cell potential has been calculated, the reaction can be written by reversing the half-reaction associated with the anode and adding the half-reactions together, using appropriate multipliers if needed to ensure that the numbers of electrons lost and gained are equal. Suppose a galvanic cell was to be constructed utilizing the following two half-reactions taken from Table 16.1: Ni 2+ (aq ) → Ni(s) Ag + (aq ) → Ag(s)

E ° = − 0.25V E ° = 0.80V

246 U Step 4. Review the Knowledge You Need to Score High Table 16.1

Standard Reduction Potentials in Aqueous Solution at 25°C E °(V)

HALF-REACTION +

−

Li + e Cs+ + e− K+ + e− Rb+ + e− Ba2+ + 2 e− Sr2+ + 2e− Ca2+ + 2 e− Na+ + e− Mg2+ + 2 e− Be2+ + 2e− Al3+ + 3e− Mn2+ + 2e− Zn2+ + 2e− Cr3+ + 3 e− Fe2+ + 2 e− Cr3+ + e− Cd2+ + 2 e− Tl+ + e− Co2+ + 2 e− Ni2+ + 2 e− Sn2+ + 2e− Pb2+ + 2 e− 2 H+ + 2 e− S(s) + 2 H+ + 2 e− Sn4+ + 2e− 2+ − Cu + e Cu2+ + 2 e− Cu+ + e− I2(s) + 2 e− Fe3+ + e− Hg22+ +2 e− Ag+ + e− Hg2+ + 2 e− 2 Hg2+ + 2 e− Br2(l) + 2 e− O2(g) + 4 H+ + 4 e− Cl2(g) + 2 e− Au3+ + 3 e− Co3+ + e− F2(g) + 2e−

→ → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → →

Li(s) Cs(s) K(s) Rb(s) Ba(s) Sr(s) Ca(s) Na(s) Mg(s) Be(s) Al(s) Mn(s) Zn(s) Cr(s) Fe(s) Cr2+ Cd(s) Tl(s) Co(s) Ni(s) Sn(s) Pb(s) H2(g) H2S(g) Sn2+ + Cu Cu(s) Cu(s) 2I− Fe2+ 2 Hg(l) Ag(s) Hg(l) Hg22+ 2Br− 2 H2O(l) 2Cl− Au(s) Co2+ 2F−

−3.05 −2.92 −2.92 −2.92 −2.90 −2.89 −2.87 −2.71 −2.37 −1.70 −1.66 −1.18 −0.76 −0.74 −0.44 −0.41 −0.40 −0.34 −0.28 −0.25 −0.14 −0.13 0.00 0.14 0.15 0.15 0.34 0.52 0.53 0.77 0.79 0.80 0.85 0.92 1.07 1.23 1.36 1.50 1.82 2.87


First, the cell voltage can be calculated using: E °cell = E °cathode − E ° anode > 0 Since the cell potential must be positive (a galvanic cell), there is only one arrangement of −0.25 and 0.80 volts than can result in a positive value: E °cell = 0 .80 v − (− 0 .25 v ) = 1 .05 V

TIP

This means that the Ni electrode is the anode and must be involved in oxidation, so its reduction half-reaction must be reversed, changing the sign of the standard half-cell potential, and added to the silver half-reaction. Note that the silver half-reaction must be multiplied by two to equalize electron loss and gain, but the half-cell potential remains the same: Ni( s) → Ni 2+ ( aq ) + 2e − E ° = 0.25V + − 2 × (Ag (aq ) + e → Ag(s)) E ° = 0.80V _______________________________________ _ _________ + 2+ E °cell = 1 .05 V Ni(s) + 2 Ag (aq ) → Ni (aq ) + Ag( s) Note that the same cell potential is obtained as using: E °cell = E °cathode − E °anode > 0 . If, for example, you are given the cell notation, you could use this method to determine the cell potential. In this case, the cell notation would be: Ni Ni 2+ Ag + Ag .

Electrolytic Cells Electrolytic cells use electricity from an external source to produce a desired redox reaction. Electroplating and the recharging of an automobile battery are examples of electrolytic cells. Figure 16.2 shows a comparison of a galvanic and electrolytic cell for the Sn/Cu system. On the left-hand side of Figure 16.2, the galvanic cell is shown for this system. Note that this reaction produces 0.48 V. But what if we wanted the reverse reaction to occur, the nonspontaneous reaction? This can be accomplished by applying a voltage in excess of 0.48 V from an external electrical source. This is shown on the right-hand side of Figure 16.2. In this electrolytic cell, electricity is being used to produce the nonspontaneous redox reaction.

Quantitative Aspects of Electrochemistry One of the most widely used applications of electrolytic cells is in electrolysis, the decomposition of a compound. Water may be decomposed into hydrogen and oxygen. Aluminum oxide may be electrolyzed to produce aluminum metal. In these situations, several questions may be asked: How long will it take; how much can be produced; what current must be used? Given any two of these quantities, the third may be calculated. To answer these questions, the balanced half-reaction must be known. Then the following relationships can be applied: 1 Faraday = 96,500 coulombs per mole of electrons (F = 96,500 C/mol e or 96,500 J/V) 1 ampere = 1 coulomb/second (A = C/s) Knowing the amperage and how long it is being applied (seconds), the coulombs can be calculated. Then the coulombs can be converted into moles of electrons, and the moles of electrons can be related to the moles (and then grams) of material being electrolyzed through the balanced half-reaction.

248 U Step 4. Review the Knowledge You Need to Score High 0.48 V

e−

e−

e−

Voltmeter Anode Sn

Cathode

(–)

(+) Salt bridge

2e−

Sn

Cu2+

Sn2+

Anode

Cu2+(aq)

+

2e−

Cu

2e−

2e−

Cu

Cu

Sn2+

Cu2+

Sn

Reduction half-reaction Cu(s)

Sn2+(aq) + 2e−

Sn(s)

Oxidation half-reaction Cu(s)

Overall (cell) reaction

Figure 16.2

Sn

2e−

Sn2+(aq) + 2e−

Sn(s) + Cu2+(aq)

(–) Salt bridge

Oxidation half-reaction Sn(s)

Cathode

(+)

Cu

Reduction half-reaction

e−

External source greater than 0.48 V

Sn2+(aq) + Cu(s)

Cu2+(aq) + 2e−

Overall (cell) reaction Cu(s) + Sn2+(aq)

Cu2+(aq) + Sn(s)

Comparison of a galvanic cell (left) and an electrolytic cell (right).

For example, if liquid titanium(IV) chloride (acidified with HCl) is electrolyzed by a current of 1.000 amp for 2.000 h, how many grams of titanium will be produced? Answer: TiCl 4 (l ) → Ti(s) + 2Cl 2 (g )( not necessary ) Ti 4+ + 4 e − → Ti ( necessary ) − ⎞⎛ ⎞⎛ ⎛ ⎞⎛ 1mole Ti ⎞⎛ 4 7 .90 g Ti ⎞ ( 2 .000 h )⎜ 3600 s ⎟⎜ 1 .000 C ⎟⎜ 1mole e ⎟⎜ ⎟⎜ ⎟ ⎝ h ⎠⎝ ⎠⎝ 96485 C ⎠⎝ 4 mole e − ⎠⎝ mol Ti ⎠ s = 0 .8936gTi Calculation of E °cell also allows for the calculation of two other useful quantities—the Gibbs free energy (ΔG°) and the equilibrium constant (K ). The Gibbs free energy is the best single thermodynamic indicator of whether a reaction will be spontaneous (review the Thermodynamics chapter). The Gibbs free energy for a reaction can be calculated from the E ° of the reaction using the following equation: ΔG ° = −nFE °cell − where F is Faraday’s constant of 96,500 C/mol e = 96,500 J/V.


If the redox reaction is at equilibrium, E ° = 0, the equilibrium constant may be calculated by: E °cell =

nE °cell 0 .0592 V log K or log K = n 0 .0592 V

Let’s apply these relationships. Determine ΔG ° and K for the following reaction: Ni( s) + 2 Ag + ( aq ) → Ni 2+ (aq ) + Ag(s) E °cell = 1 .05 V Answer: For this reaction, two electrons are transferred from the Ni to the Ag. Thus, n is 2 for this reaction. The value of F (96,500 J/V) is given on the exam, so you will not need to memorize it. The first answer is: ΔG ° = −nFE °cell = − 2(96,500 J/V )(1 .05 V ) = − 2 .03 ×105 J The second answer is: log K =

nE °cell 2(1 .05 V ) = = 35 .5 0 .0592 V 0 .0592 V

This gives a K of about 1035 (actually K = 3 × 1035). In many cases, the approximate value will be all you need for the AP exam.

Nernst Equation Thus far, all of our calculations have been based on the standard cell potential or standard halfcell potentials—that is, the standard state conditions that were defined previously. However, many times the cell is not at standard conditions—commonly the concentrations are not 1 M. The actual cell potential, Ecell, can be calculated by the use of the Nernst equation: ⎛ 0 .0592 ⎞ ⎛ RT ⎞ E cell = E °cell − ⎜ ⎟ logQ at 25°C ⎟ lnQ = E °cell − ⎜ ⎝ n ⎠ ⎝ nF ⎠ where R is the ideal gas constant, T is the Kelvin temperature, n is the number of electrons transferred, F is Faraday’s constant, and Q is the reaction quotient discussed in the Equilibrium chapter. The second form, involving log Q, is the more useful form. If one knows the cell reaction, the concentrations of ions, and E °cell, then the actual cell potential can be calculated. Another useful application of the Nernst equation is in calculating the concentration of one of the reactants from cell-potential measurements. Knowing the actual cell potential and E °cell allows calculation of Q, the reaction quotient. Knowing Q and all but one of the concentrations allows the calculation of the unknown concentration. Another application of the Nernst equation is in concentration cells. A concentration cell is an electrochemical cell in which the same chemical species is used in both cell compartments, but differing in concentration. Because the half-reactions are the same, E °cell = 0.00 V. Simply substituting the appropriate concentrations into the reaction quotient allows calculation of the actual cell potential. When using the Nernst equation on a cell reaction in which the overall reaction is not supplied, only the half-reactions and concentrations, there are two equivalent methods to work the problem. The first way is to write the overall redox reaction based upon E ° values,

250 U Step 4. Review the Knowledge You Need to Score High and then apply the Nernst equation. If E cell turns out to be negative, it indicates that the reaction is not a spontaneous one (an electrolytic cell), or that the reaction is written backwards if it supposed to be a galvanic cell. If it is supposed to be a galvanic cell, all you need to do is to reverse the overall reaction and change the sign on E cell to positive. The other method involves using the Nernst equation with the individual half-reactions, then combining them depending on whether or not it is a galvanic cell. The only disadvantage to the second method is that you must use the Nernst equation twice. Either method should lead you to the correct answer. Let’s practice. Calculate the potential of a half-cell containing 0.10 M K2Cr2O7(aq), 3+ −4 + 0.20 M Cr (aq), and 1.0 × 10 M H (aq). Answer: The following half-reaction is given on the AP Exam Cr2O27− ( aq ) +14H+ ( aq ) + 6e − → 2Cr 3+ (aq ) + 7H 2O(l ) E ° = 1 .3 3 V 0 .0592 [Cr 3+ ]2 E = E °− ignore H 2O log − n [Cr O2 ][H+ ]14 2

0 .0592 = 1 .33 V − log 6 = 0 .78 V

7

[.20]2 [.10][1 .0 ×10−4 ]14


Electrochemical experiments fall into two broad categories. Some experiments are concerned with standard cell voltages, while other experiments use the Nernst equation directly or indirectly. Experiment 21 in the Experimental chapter uses these concepts. Measurements of the cell potential are essential and require a voltmeter (potentiometer). These measurements may be taken from different combinations of half-cells, or from measurements before and after changes of some aspect of the cell were made. Using measurements of different half-cell combinations, a set of “standard” reduction potentials may be constructed. This set will be similar to a table of standard reduction potentials. The solutions used in the half-cells must be of known concentration. These solutions are produced by weighing reagents and diluting to volume. The measurements will require a balance and a volumetric flask. It is also possible to produce known concentrations by diluting solutions. This method requires a pipette and a volumetric flask. Review the Solutions and Colligative Properties chapter for solution techniques. Experiments involving the Nernst equation are primarily concerned with concentrations. One or more of the concentrations in the Q portion of the Nernst equation are calculated by measuring the nonstandard cell potential and comparing this to the standard cell potential. Remember, you calculate the concentration from a measured voltage. Once the concentration is determined, it may be combined with other concentrations and used to calculate an equilibrium constant.


1. Be sure your units cancel to give the unit wanted in your final answer. 2. Be sure to round your answer off to the correct number of significant figures. 3. Remember that oxidation is the loss of electrons and reduction the gain, and that in redox reactions the same number of electrons is lost and gained. 4. Be sure that what you determine to be the oxidizing and reducing agents are reactant species.


5. When diagramming an electrochemical cell, be sure the electrons go from anode to cathode. 6. Be sure that for a galvanic cell, the cell potential is greater than 0. 7. Be sure to label the anode as (−) and the cathode (+) in a galvanic cell. 8. In cell notation, be sure to write anode, anode compartment, salt bridge, cathode compartment, cathode in this specific order. 9. When using a multiplier to equalize electron loss and gain in reduction half-cell potentials, do not use the multiplier on the voltage of the half-cell. 10. When using the Nernst equation, be sure to use the correct form of the reaction quotient, products over reactants, and each concentration raised to the power the same as the coefficient in the balanced reaction.

U Review Questions Answer the following questions in 25 minutes. You may not use a calculator. You may use the periodic table at the back of the book. Choose one of the following for questions 1–4. (A) (B) (C) (D) (E)

There is no change in the voltage. The voltage becomes zero. The voltage increases. The voltage decreases, but stays positive. The voltage becomes negative.

The following reaction takes place in a voltaic cell. 2+ 2+ Zn(s) + Cu (1 M) → Cu(s) + Zn (1 M)

The cell has a voltage that is measured and found to be +1.10 V. 1. What happens to the voltage when a saturated ZnSO4 solution is added to the zinc compartment of the cell? 2. What happens to the cell voltage when the copper electrode is made smaller? 3. What happens to the cell voltage when the salt bridge is filled with deionized water instead of 1 M KNO3? 4. What happens to the cell voltage after the cell has operated for 10 minutes? + 2+ − 2− 5. MnO4 (aq) + H (aq) + C2O4 (aq) → Mn (aq) + H2O(l) + CO2(g) + What is the coefficient of H when the above reaction is balanced? (A) 16 (B) 2 (C) 8 (D) 5 (E) 32

− − 2− 2− 6. S2O3 + OH → SO4 + H2O + e

After the above half-reaction is balanced, which of the following are the respective coefficients of − 2− OH and SO4 in the balanced half-reaction? (A) (B) (C) (D) (E)

8 and 3 6 and 2 10 and 2 5 and 2 5 and 1

7. How many moles of Pt may be deposited on the cathode when 0.80 F of electricity is passed 4+ through a 1.0 M solution of Pt ? (A) (B) (C) (D) (E)


8. All of the following may serve as reducing agents, EXCEPT: (A) (B) (C) (D) (E)

Mg Cs 2+ Fe MnO4− Br−

252 U Step 4. Review the Knowledge You Need to Score High 9. Cr2O72− + 14 H+ +3 S2− → 2 Cr3+ +3 S + 7 H2O For the above reaction, pick the true statement from the following. 2− 2− (A) The S is reduced by Cr2O7 . (B) The oxidation number of chromium changes from +7 to +3. (C) The oxidation number of sulfur remains −2. 2− 2− (D) The S is oxidized by Cr2O7 . + (E) The H oxidizes the S. + − − 10. H + NO3 + e → NO + H2O

What is the coefficient for water arising when the above half-reaction is balanced? (A) (B) (C) (D) (E)

3 4 2 1 6

2+ − Cd + 2 e → Cd E ° = −0.40 V

Given the above standard reduction potentials, estimate the approximate value of the equilibrium constant for the following reaction: Cd + Co 2+ → Cd 2+ + Co −4

10 10−2 104 1016 102

12. When a basic solution of KMnO4 is added to an SnCl2 solution, a brown precipitate of MnO2 forms and Sn4+ remains in solution. When the same basic solution of KMnO4 is added to an NaF solution, no reaction occurs. Which of the substances involved in these reactions serves as the best reducing agent? (A) (B) (C) (D) (E)

(A) an impure silver cathode and an inert anode (B) an impure silver cathode and a pure gold anode (C) a pure silver cathode with an impure silver anode (D) a pure gold cathode with an impure silver anode (E) an impure silver cathode with a pure silver anode + 2− 2+ − 14. 2 MnO4 + 16 H + 5 S → 2 Mn + 5 S + 8 H2O

The reducing agent in the above reaction is which of the following?

2+ − 11. Co + 2 e → Co E ° = −0.28 V

(A) (B) (C) (D) (E)

13. A sample of silver is to be purified by electrorefining. This will separate the silver from an impurity of gold. The impure silver is made into an electrode. Which of the following is the best way to set up the electrolytic cell?

SnCl2 KMnO4 NaF MnO2 Sn4+

(A) (B) (C) (D) (E)

−

MnO4 H+ S 2− S Mn2+

15. 2 Fe3+ + Zn → Zn2+ + 2 Fe2+ The reaction shown above was used in an electrolytic cell. The voltage measured for the cell was not equal to the calculated E ° for the cell. This discrepancy could be caused by which of the following? (A) The anion in the anode compartment was chloride, instead of nitrate as in the cathode compartment. (B) One or more of the ion concentrations was not 1 M. (C) Both of the solutions were at 25°C instead of 0°C. (D) The solution in the salt bridge was Na2SO4 instead of KNO3. (E) The anode and cathode were different sizes. 16. How many grams of mercury could be produced by electrolyzing a 1.0 M Hg(NO3)2 solution with a current of 2.00 A for 3.00 h? (A) (B) (C) (D) (E)

22.4 g 201 g 11.2 g 44.8 g 6.00 g


17. An electrolysis cell was constructed with two platinum electrodes in a 1.00 M aqueous solution of KCl. An odorless gas evolves from one electrode, and a gas with a distinctive odor evolves from the other electrode. Choose the correct statement from the following list. (A) The gas with the distinctive odor was evolved at the anode. (B) The odorless gas was oxygen. (C) The gas with the distinctive odor was evolved at the negative electrode. (D) The odorless gas was evolved at the positive electrode. (E) The odorless gas was evolved at the anode. 18. H2O2(aq) + KIO4(aq) → KIO3(aq) + O2(g) + H2O(l) Choose the true statement from the following list. (A) The iodine oxidation state is reduced from +8 to +6. (B) This is not an oxidation–reduction reaction. (C) H2O2 behaves as a reducing agent. (D) Hydrogen is reduced from +2 to +1. (E) H2O2 behaves as an oxidizing agent.

19. Choose the correct statement from the following list. (A) The BrO3− undergoes oxidation at the anode. (B) Br goes from a −1 oxidation to a 0 oxidation state. (C) Br2 is oxidized at the anode. + (D) H is a catalyst. (E) The BrO3− undergoes reduction at the cathode. 20. If a current of 5.0 A is passed through the electrolytic cell for 0.50 h, how should you calculate the number of grams of Br2 that will form? (A) (B) (C) (D) (E)

2+ 3+ 2+ 21. 2 M(s) + 3 Zn (aq) → 2 M (aq) + 3 Zn (aq) E ° = 0.90 V 2+ − Zn (aq) + 2e → Zn(s) E ° = −0.76 V

Using the above information, determine the standard reduction potential for the following reaction: M3+ (aq ) + 3 e − → M( s)

Questions 19 and 20 are concerned with the following half-reaction in an electrolytic cell: + − − 2 BrO3 + 12 H + 10 e → Br2 + 6 H2O

(5.0)(0.50)(3600)(159.8)/(10) (5.0)(0.50)(3600)(159.8)/(96500)(10) (5.0)(0.50)(60)(159.8)/(96500)(10) (5.0)(0.50)(3600)(79.9)/(96500)(10) (5.0)(0.50)(159.8)/(96500)(10)

(A) (B) (C) (D) (E)

0.90 V +1.66 V 0.00 V −0.62 V −1.66V

U Answers and Explanations 1. D—The addition of zinc ion, from the ZnSO4, increases the zinc concentration. This increases the numerator in the logarithm part of the Nernst equation. This is a negative term, so the cell voltage will decrease. 2. A—The size of the electrode is not important. 3. B—The salt bridge serves as an ion source to maintain charge neutrality. Deionized water would not be an ion source, so the cell could not operate.

4. D—As the cell operates, the copper ion concentration would decrease and the zinc ion concentration would increase. Both of these changes would make the logarithm term in the Nernst equation more negative. This would decrease the voltage. 5. A—The balanced equation is: 2 MnO4 − (aq ) + 16 H + (aq ) + 5 C 2O4 2− (aq ) → 2 Mn 2+ (aq ) + 8 H 2O( l ) + 10 CO2 ( g )

254 U Step 4. Review the Knowledge You Need to Score High 6. C—The balanced equation is: S2O32− +10 OH− → 2 SO24− + 5H 2O + 8 e − 7. C—It takes 4 mol of electrons (4 F) to change the platinum ions to platinum metal. The calculation would be: (0.80 F)(1 mol Pt/4 F) = 0.20 mol Pt 8. D—For a substance to serve as a reducing agent, it must be capable of being oxidized. The man− ganese, in the MnO4 , is already in its highest oxidation state, so it could not be oxidized. All other answers contain a substance that may be oxidized. 9. D—The dichromate ion oxidizes the sulfide ion to elemental sulfur, as the sulfide ion reduces the dichromate ion to the chromium(III) ion. Chromium goes from +6 to +3,while sulfur goes from −2 to 0. The hydrogen remains at +l, so it is neither oxidized nor reduced. 10. C—The balanced chemical equation is: 4 H+ + NO3− + 3 e − → NO + 2 H2O 11. C—Using the equation: log K =

nE ° 2(0 .12) = = 4 .05 0 .0592 0 .0592

You should realize that log K = 4 gives a 4 4 K = 10 . This will give a K of about 10 (actually, 4 K = 1.1 × 10 ). 2+ 12. A—The Sn , from SnCl2, reduces the manganese from +7 to +4. This makes SnCl2 a reduc4+ ing agent. The tin is oxidized to Sn , so KMnO4 is an oxidizing agent. NaF did nothing, so it behaves as neither an oxidizing nor as a reducing agent.

13. C—The impure silver must be oxidized so it will go into solution. Oxidation occurs at the anode. Reduction is required to convert the silver ions to pure silver. Reduction occurs at the cathode. The cathode must be pure silver, otherwise it could be contaminated with the cathode material. − 14. D—The MnO4 oxidizes the sulfide ion to elemental sulfur, while the sulfide ion reduces the permanganate ion to the manganese(II) ion.

15. B—If the voltage was not equal to E °, then the cell was not standard. Standard cells have 1 M concentrations, and operate at 25°C with a partial pressure of each gas equal to 1 atm. No gases are involved in this reaction, so the cell must be operating at a different temperature or a different concentration (or both). ⎛ 1F ⎞ ⎛ 2.00 C ⎞ ⎛ 3600 s ⎞ 16. A— ⎜ ⎟ (3.00 h ) ⎜ ⎟ ⎟⎜ ⎝ s ⎠ ⎝ 1h ⎠ ⎝ 96500 C ⎠ ⎛ 1 mol Hg ⎞ ⎛ 200.6 g Hg ⎞ ⎜ ⎟⎜ ⎟ ⎝ 2 F ⎠ ⎝ 1 mol Hg ⎠ You can estimate the answer by replacing 96,500 with 100,000 and 200.6 with 200. 17. A—The gases produced are hydrogen (at the cathode) and chlorine (at the anode). Hydrogen is odorless, while chlorine has a distinctive odor. 18. C—The KIO4 oxidizes the H2O2. Thus, H2O2 is the reducing agent. The iodine is reduced from +7 to +5, while the oxygen in the H2O2 is oxidized from −1 to 0 (O2). −

19. E—The bromate ion, BrO3 , is gaining electrons, so it is being reduced. Reduction always occurs at the cathode. 20. B—Recall that 5.0 amp is 5.0 C/s. The calculation would be: ⎛ 5.0 C ⎞ ⎛ 0.50 h ⎞ ⎛ 3600 s ⎞ ⎛ 159.8 g ⎞ ⎛ 1F ⎞ ⎛ 1 mol Br2 ⎞ ⎟⎜ ⎟⎜ ⎟⎜ ⎜ ⎟⎜ ⎟ ⎟⎜ ⎝ s ⎠ ⎝ i ⎠ ⎝ h ⎠ ⎝ mol Br2 ⎠ ⎝ 96, 500 C ⎠ ⎝ 10 F ⎠

21. E—The half-reactions giving the overall reaction must be: 3[ Zn 2+ ( aq ) + 2e − → Zn( s)] 2[ M( s) → M3+ (+3e − )] 2M( s) + 3Zn 2+ ( aq ) → 2M3+ ( aq ) + 3Zn 2+ (aq )

E ° = −0.76 V E °=? E ° = 0.90 V

Thus, -0.76 + ? = 0.90, giving ? = 1.66 V. The half-reaction under consideration is the reverse of the one used in this combination, so the sign of the calculated voltage must be reversed. Do not make the mistake of multiplying the voltages when the half-reactions were multiplied to equalize the electrons.


U Free-Response Questions First Free-Response Question Answer the following question in 15 minutes. You may not use a calculator. You may use the tables at the back of the book. V

V = voltmeter

The above galvanic cell is constructed with a cobalt electrode in a 1.0 M Co(NO3)2 solution in the left compartment, and a silver electrode in a 1.0 M AgNO3 solution in the right compartment. The salt bridge contains a KNO3 solution. The cell voltage is positive. a. What is the balanced net ionic equation for the reaction, and what is the cell potential? Co 2+ 2 e − → Co Ag + +1e − → Ag

E ° = − 0 .28 V E ° = + 0 .80 V

b. Which electrode is the anode? Justify your answer. c. Could KCl be substituted for the KNO3 in the salt bridge? Justify your answer. d. If some solid Co(NO3)2 is added to the cobalt compartment, what will happen to the voltage? Justify your answer. e. If the cell is allowed to operate until equilibrium is established, what will the potential be? Justify your answer.

Second Free-Response Question You have 15 minutes to answer the following questions. You may not use a calculator. You may use the tables in the back of the book.

256 U Step 4. Review the Knowledge You Need to Score High V

V = voltmeter

The above galvanic cell is constructed with a cadmium electrode in a 1.0 M Cd(NO3)2 solution in the left compartment, and a silver electrode in a 1.0 M AgNO3 solution in the right compartment. The salt bridge contains a KNO3 solution. The cell voltage is positive. a. What is the balanced net ionic equation for the reaction, and what is the cell potential? b. Show how to calculate the equilibrium constant for the cell. c. Write the expression for Q that would be needed in the Nernst equation. Explain why any substances from the net ionic equation do not appear in Q. d. Show how to calculate the free energy for the reaction. e. Identify the anode, the cathode, the oxidizing agent, and the reducing agent.

U Answers And Explanations First Free-Response Question a. The cell reaction is: Co( s) + 2 Ag + (aq ) → Co 2+ (aq ) + 2 Ag( s) Give yourself 1 point if you got this correct. The physical states are not necessary. The calculation of the cell potential may be done in different ways. Here is one method: Co → Co 2+ + 2 e − ( Ag + +1e − → Ag ) Co(s) + 2 Ag + ( aq ) → Co 2+ (aq ) + 2 Ag(s )

E ° = + 0 .28 V E ° = + 0 .80 V E ° = + 1 .08 V

Give yourself 1 point for the correct answer regardless of the method used. The most common mistake is to multiply the silver voltage by two. You do not get the point for an answer of 1 V. The half-reactions and their standard reductions potentials are supplied on the exam, not in the problem as given here. You will be expected to find the appropriate half-reactions in a table.


b. The cobalt is the anode. You get 1 point for this statement. The reason Co is the anode is because the Co is oxidized. You get 1 point for this statement, or if you say the Co loses electrons. c. KCl cannot be substituted for KNO3 in this case. This is worth 1 point. − The Cl ion from the KCl would react with the silver ion to give insoluble AgCl. Give yourself 1 point for this explanation.

d. The voltage would decrease. Give yourself 1 point for this answer. 2+ The excess Co , from the Co(NO3)2, would make the cell nonstandard. The Nernst equation should be used to calculate the new voltage. The concentration of the cobalt ions appears in the numerator of the logarithm term of the Nernst equation. This makes the logarithm term more negative, yielding a lower voltage. Give yourself 1 point for any answer relating to this. It might be helpful if you wrote out the Nernst equation for this cell.

e. At equilibrium the cell voltage would be 0 V. This is worth 1 point. At equilibrium no work is done, so the potential must be zero. Give yourself 1 point for this answer. There are a total of 10 points possible on these questions.

Second Free-Response Question a. The following reduction half-reactions are provided on the AP exam: Cd 2+ + 2 e − → Cd Ag + +1e − → Ag

E ° = − 0 .40 V E ° = + 0 .80 V

The first reaction needs to be reversed, the silver half-reaction needs to be doubled, and the reactions and voltages added: Cd →+Cd 2+ + 2e − 2(Ag + +1e − → Ag) 2 Ag + + Cd → Cd 2 + 2 Ag

E ° = + 0 .40 V E ° = + 0 .80 V E ° = + 1 .20 V

You get 1 point for the correct equation. You also get 1 point for the correct cell voltage. b. Use the equation log K = nE°/0.0592. (This equation is given on the AP exam.) log K = (2 × 1.20)/0.0592 You get 1 point for entering the values into the correct equation. You get the point even if you entered a wrong answer for E ° from part a. The question does not ask you to do any calculations, so there are no points for including any work beyond what is shown. 2+ + 2 c. Q = [Cd ]/[Ag ] This answer is worth 1 point.

The remaining substances (Cd and Ag) are solids. Solids do not appear in Q expressions. You get 1 point for the explanation. d. Use the equation G ° = −nFE °. (This equation is given on the AP exam.) G ° = −nFE ° = (−2)(96500)(1.20).

258 U Step 4. Review the Knowledge You Need to Score High You get 1 point for entering the values into the correct equation. The question does not ask you to do any calculations, so there are no points for including any work beyond what is shown. e. Anode Cathode Oxidizing Agent Reducing Agent

Cd Ag + Ag Cd

You get 1 point for each correctly identified item. Total your points; there are 10 points possible. Subtract one point if all answers do not have the correct number of significant figures.

U Rapid Review G

G

In redox reactions electrons are lost and gained. Oxidation is the loss of electrons, and reduction is the gain of electrons. The reactant that is being reduced is the oxidizing agent, and the reactant being oxidized is the reducing agent.

G

The same number of electrons is lost and gained in redox reactions.

G

Galvanic (voltaic) cells produce electricity through the use of a redox reaction.

G

G

G

G

The anode is the electrode at which the oxidation half-reaction takes place. The anode compartment is the solution in which the anode is immersed. The cathode is the electrode at which reduction takes place, and the cathode compartment is the solution in which the cathode is immersed. In a galvanic cell the anode is labeled as (−) and the cathode (+). A salt bridge is used in an electrochemical cell to maintain electrical neutrality in the cell compartments.

G

Be able to diagram an electrochemical cell.

G

The cell notation is a shorthand way of representing a cell. It has the form: anode |anode compartment ||cathode compartment |cathode

G

Standard reduction potentials are used to calculate the cell potential under standard conditions. All half-reactions are shown in the reduction form.

G

For a galvanic cell E °cell > 0.

G

E °cell = E °cathode − E 0anode > 0. Know how to use this equation to calculate E °cell.

G

Electrolytic cells use an external source of electricity to produce a desired redox reaction.

G

Review how to diagram an electrolytic cell.

G

The following relationships can be used to calculate quantitative changes that occur in an electrochemical cell, especially an electrolytic one: 1 F = 96,500 C per mole of electron − (F = 96,500 C/mol e = 96,500 J/V) and 1 amp = 1 C/s (A = C/s)

Electrochemistry Í 259 G

G

G

The standard cell potetial can be used to calculate the Gibbs free energy for the reaction: ΔG ° = −nFE °cell. Know how to use this equation. The standard cell potential can also be used to calculate the equilibrium constant for a nE °cell . Know how to use this equation. reaction: log K = 0.0592 V ⎛ 0 .0592 ⎞ The Nernst equation, E cell = E °cell − ⎜ ⎟ logQ at 25°C, can be used to calculate the ⎝ n ⎠ potential of a cell that is not at standard conditions, or to calculate the concentration of one cell compartment if the standard cell potential, the actual cell potential, and the other concentrations are known. Know how to use the Nernst equation for these purposes.

CHAPTER

17

Nuclear Chemistry IN THIS CHAPTERR Summary: Radioactivity, the spontaneous decay of an unstable isotope to a more stable one, was first discovered by Henri Becquerel in 1896. Marie Curie and her husband expanded on his work and developed most of the concepts that are used today. Throughout this book you have been studying traditional chemistry and chemical reactions. This has involved the transfer or sharing of electrons from the electron clouds, especially the valence electrons. Little has been said up to this point regarding the nucleus. Now we are going to shift our attention to nuclear reactions and, for the most part, ignore the electron clouds. Keywords and Equations KEY IDEA

No specific nuclear equations are provided, but review first-order equations in the Kinetics chapter.

Nuclear Reactions Balancing Nuclear Reactions KEY IDEA

260 U

Most nuclear reactions involve breaking apart the nucleus into two or more different elements or subatomic particles. If all but one of the particles is known, the unknown particle can be determined by balancing the nuclear equation. When chemical equations are balanced, coefficients are added to ensure that there are the same number of each type of atom on both sides of the reaction arrow. To balance nuclear equations, we ensure that there is the same sum of both mass numbers and atomic numbers on both the left and right

Nuclear Chemistry Í 261

of the reaction arrow. Recall that a specific isotope of an element can be represented by the following symbolization: A Z

X

In this symbolization A is the mass number (sum of protons and neutrons), Z is the atomic number (number of protons), and X is the element symbol (from the periodic table). In balancing nuclear reactions, make sure the sum of all A values on the left of the arrow equals the sum of all A values to the right of the arrow. The same will be true of the sums of the Z values. Knowing that these sums must be equal allows one to predict the mass and atomic number of an unknown particle if all the others are known. Consider the transmutation—creation of one element from another— of Cl-35. This isotope of chlorine is bombarded by a neutron and H-1 is created, along with an isotope of a different element. First, a partial nuclear equation is written: 35 17

Cl + 01 n → 11 H + xy ?

The sum of the mass numbers on the left of the equation is 36 = (35 + 1) and on the right is 1 + x. The mass number of the unknown isotope must be 35. The sum of the atomic numbers on the left is 17 = (17 + 0), and 1 + y on the right. The atomic number of the unknown must then be 16. This atomic number identifies the element as sulfur, so a complete nuclear equation can be written: 35 17

35 Cl + 01 n → 11 H + 16 S

Sulfur-35 does not occur in nature; it is an artificially produced isotope.

Natural Radioactive Decay Modes KEY IDEA

Three common types of radioactive decay are observed in nature, and two others are occasionally observed. Alpha Emission

An alpha particle is a helium nucleus with two protons and two neutrons. It is represented as: 42 He or α. As this particle is expelled from the nucleus of the radioisotope that is undergoing decay, it has no electrons and thus has a 2+ charge. However, it quickly acquires two electrons from its surroundings to form the neutral atom. Most commonly, the alpha particle is shown as the neutral particle and not the cation. Radon-222 undergoes alpha decay according to the following equation: 222 86

Rn → 218 Po + 42 He 84

Notice that in going from Rn-222 to Po-218, the atomic number has decreased by 2 and the mass number by 4. Beta Emission

0 0 A beta particle is an electron and can be represented as either −1 β or −1 e. This electron comes from the nucleus, not the electron cloud, and results from the conversion of a 1 1 0 neutron into a proton and an electron: 0 n → 1 p + −1 e.

262 U Step 4. Review the Knowledge You Need to Score High Nickel-63 will undergo beta decay according to the following equation: 63 28

63 Ni → 29 Cu + −01 e.

Notice that the atomic number has increased by 1 in going from Ni-63 to Cu-63, but the mass number has remained unchanged. Gamma Emission

Gamma emission is the giving off of high-energy, short-wavelength photons similar to X-rays. This radiation is commonly represented as γ. Gamma emission commonly accompanies most other types of radioactive decay, but is often not shown in the balanced nuclear equation because it has neither appreciable mass nor charge. Alpha, beta, and gamma emissions are the most common types of natural decay mode, but positron emission and electron capture are also observed occasionally. Positron Emission

A positron is essentially an electron that has a positive charge instead of a negative one. It is represented as 01β or 01 e. Positron emission results from the conversion of a proton to 1 1 0 a neutron and a positron: +1 p → 0 n + +1 e. It is observed in the decay of some natural radioactive isotopes, such as K-40:

40 19

K→

40 18

Ar + +01 e.

Electron Capture

The four decay modes described above all involve the emission or giving off of a particle; electron capture is the capturing of an electron from the energy level closest to the nucleus 0 1 1 (1s) by a proton in the nucleus. This creates a neutron: −1 e + 1 p → 0 n. Electron capture leaves a vacancy in the 1s energy level, and an electron from a higher energy level drops down to fill this vacancy. A cascading effect occurs as the electrons shift downward and, as they do so, energy is released. This energy falls in the X-ray part of the electromagnetic spectrum. These X-rays give scientists a clue that electron capture has taken place. Polonium-204 undergoes electron capture:

TIP

204 84

Po + −01 e →

204 83

Bi + X-rays. Notice that

the atomic number has decreased by 1, but the mass number has remained the same. Remember that electron capture is the only decay mode that involves adding a particle to the left side of the reaction arrow.

Nuclear Stability KEY IDEA

Predicting whether a particular isotope is stable and what type of decay mode it might undergo can be tricky. All isotopes containing 84 or more protons are unstable and will undergo nuclear decay. For these large, massive isotopes, alpha decay is observed most commonly. Alpha decay gets rid of four units of mass and two units of charge, thus helping to relieve the repulsive stress found in these nuclei. For other isotopes, with atomic numbers less than 84, stability is best predicted by the use of the neutron-to-proton (n/p) ratio. If one plots the number of neutrons versus the number of protons for the known stable isotopes, the nuclear belt of stability is formed. At the low end of this belt of stability (Z < 20), the n/p ratio is 1. At the high end (Z ≈ 80), the n/p ratio is about 1.5. One can then use the n/p ratio of the isotope under question to predict whether or not it will be stable. If it is unstable, the isotope will utilize a decay mode that will bring it back onto the belt of stability. For example, consider Ne-18. It has 10 p and 8 n, giving a n/p ratio of 0.8. That is less than 1, so the isotope is unstable. This isotope is neutron-poor, meaning it doesn’t have


enough neutrons (or has too many protons) to be stable. Decay modes which increase the number of neutrons, decrease the number of protons, or both, would be favored. Both positron emission and electron capture accomplish this by converting a proton into a neutron. As a general rule, positron emission occurs with lighter isotopes and electron capture with heavier isotopes. Isotopes that are neutron-rich, that have too many neutrons or not enough protons, lie above the belt of stability and tend to undergo beta emission because that decay mode converts a neutron into a proton. A particular isotope may undergo a series of nuclear decays until finally a stable isotope is formed. For example, radioactive U-238 decays to stable Pb-206 in 14 steps, a majority of which are alpha emissions, as one might predict.

Nuclear Decay Calculations A radioactive isotope may be unstable, but it is impossible to predict when a certain atom will decay. However, if a statistically large enough sample is examined, some trends become obvious. The radioactive decay follows first-order kinetics (see Chapter 14 for a more in-depth discussion of first-order reactions and equations). If the number of radioactive atoms in a sample is monitored, it can be determined that it takes a certain amount of time for half the sample to decay; it takes the same amount of time for half the remaining sample to decay; and so on. The amount of time it takes for half the sample to decay is called the half-life of the isotope and is given the symbol t1/2. The table below shows the percentage of radioactive isotope remaining versus half-life. HALF-LIFE, t1/2

PERCENT RADIOACTIVE ISOTOPE REMAINING

0

100

1

50

2

25

3

12.5

4

6.25

5

3.12

6

1.56

7

0.78

8

0.39

9

0.19

10

0.09

As a general rule, the amount of radioactivity at the end of 10 half-lives drops below the level of detection and the sample is said to be “safe.” Half-lives may be very short, 4.2 × 10−6 seconds for Po-213, or very long, 4.5 × 109 years for U-238. The long half-lives of some waste products is a major problem with nuclear fission reactors. Remember, it takes 10 half-lives for the sample to be safe. If only multiples of half-lives are considered, the calculations are very straightforward. For example, I-131 is used in the treatment of thyroid cancer and has a t1/2 of eight days. How long would it take to decay to 25% of its original amount? Looking at the chart, you see that 25% decay would occur at two half-lives or 16 days. However, since radioactive

264 U Step 4. Review the Knowledge You Need to Score High decay is not a linear process, you cannot use the chart to predict how much would still be radioactive at the end of 12 days or at some time (or amount) that is not associated with a multiple of a half-life. To solve these types of problems, one must use the mathematical relationships associated with first-order kinetics that were presented in the Kinetics chapter. In general, two equations are used:

(1) ln [A ] − ln [A ] t

( 2 )t

1/2

o

= ln 2/k

In these equations, the ln is the natural logarithm; At is the amount of isotope radioactive at some time t; Ao is the amount initially radioactive; and k is the rate constant for the decay. If you know initial and final amounts and are looking for the half-life, you would use equation (1) to solve for the rate constant and then use equation (2) to solve for t1/2. For example: What is the half-life of a radioisotope that takes 15 min to decay to 90% of its original activity? Using equation (1): Using equation (1)

(

ln 90 / 100 = −k 15 min

(

− 0 .1054 = −k 15 min −3

−

7 .02 ×10 min = k

)

)

Now equation (2): t 1/2 = ln 2 / 7 .02 ×10−3 min −1 t 1/2 = 0 .693 / 7 .02 ×10−3 min −1 t 1/2 = 98 .7 min If one knows the half-life and amount remaining radioactive, equation (2) can be used to calculate the rate constant k and equation (1) can then be used to solve for the time. This is the basis of C-14 dating, which is used to determine the age of objects that were once alive. For example, suppose a wooden tool is discovered and its C-14 activity is determined to have decreased to 65% of the original. How old is the object? The half-life of C-14 is 5730 yr. Substituting this into equation (2): 5730 yr = ln 2 / k 5730 yr = 0 .6931 / k k = 1 .21×1 0−4 yr −1 Substituting this rate constant into equation (1): ln 65 / 100 = −(1.21×10−4 yr −1 )t −0.4308 = −(1.21×10−4 yr −1 )t t = 3600 yr

Mass–Energy Relationships Whenever a nuclear decay or reaction takes place, energy is released. This energy may be in the form of heat and light, gamma radiation, or kinetic energy of the expelled particle and recoil of the remaining particle. This energy results from the conversion of a very small amount of matter into energy. (Remember that in nuclear reactions there is no conservation


of matter, as in ordinary chemical reactions.) The amount of energy that is produced can be 2 calculated by using Einstein’s equation E = mc , where E is the energy produced, m is the mass converted into energy (the mass defect), and c is the speed of light. The amount of matter that is converted into energy is normally very small, but when it is multiplied by the speed of light (a very large number) squared, the amount of energy produced is very large. −6 For example: When 1 mol of U-238 decays to Th-234, 5 × 10 Kg of matter is converted to energy (the mass defect). To calculate the amount of energy released:

E = mc 2 E = (5 ×10−6 kg )(3 .00 ×108 m/s)2 E = 5 ×1011 kg × m 2 /s 2 = 5 ×1011 J if the mass is in kilograms, the answer will be in joules.

Common Mistakes to Avoid 1. Make sure your answer is reasonable. Don’t just write down the answer from your calculator. 2. Make sure your units cancel in your calculations, leaving the unit you want. 3. When balancing nuclear equations, be sure the sum of all mass numbers on the left side of the arrow equals the sum of all mass numbers on the right side. The same will be true of the sums of the atomic numbers. 4. When balancing nuclear reactions, be sure you use the atomic number of the unknown and not the mass number to determine the element symbol. 5. Make sure that in alpha, beta, gamma, and positron emission the particle being emitted is on the right-hand side of the reaction arrow. In electron capture, the electron should be on the left side of the arrow. 6. In half-life problems, don’t omit the minus sign. Watch your units. 7. In half-life problems, be sure to use the amount of isotope still radioactive as Nt and not the amount decayed.

TIP

U Review Questions You have 10 minutes. You may not use a calculator. You may use the periodic table at the back of the book. For each question, circle the letter of your choice. 1. When 88 Ra decays, it emits 2 α particles, then a β particle, followed by an α particle. The resulting nucleus is: 226

(A)

212 83

Bi

(B)

222 86

Rn

(C)

214 82

Pb

(D)

214 83

(E)

212 85

Bi

At

230 2. The formation of 90Th from (A) electron capture (B) α decay (C) β decay (D) positron decay (E) γ decay

234 92

U occurs by:

3. Which of the following lists the types of radiation in the correct order of increasing penetrating power? (A) α, γ, β (B) β, α, γ (C) α, β, γ (D) β, γ, α (E) γ, β, α

266 U Step 4. Review the Knowledge You Need to Score High 4. What is the missing product in the following nuclear reaction? 236 92

U → 4 01 n + 136 I + _____ 53

U undergoes radioactive decay by 6. An atom of 238 92 α emission. What is the product nuclide? (A)

230 90

(A) 9039Y

(B)

234 90

(B) 96 Sr 38

(C)

230 92

(C) 9639Y

(D)

230 91

98 (D) 40 Zr

(E)

230 238

(E) 98 Nb 41 5. Which of the following statements are correct concerning β particles? I. They have a mass number of zero and a charge of –1. II. They are electrons. III. They are less penetrating than α particles. (A) I and II (B) I and III (C) II and III (D) I only (E) II only

Th

Th U Pa

Pu

3 7. If 75% of a sample of pure 1 H decays in 24.6 years, what is the half-life of 31 H ?

(A) 24.6 yr (B) 18.4 yr (C) 12.3 yr (D) 6.15 yr (E) 3.07 yr

U Answers and Explanations 1. D—The mass should be 226 − (4 + 4 + 0 + 4) = 214. The atomic number should be 88 − (2 + 2 − 1 + 2) = 83.

5. A—In nuclear reactions the mass of a β particle is treated as 0, with a charge of −1. Electrons and β particles are the same thing.

2. B—Mass difference = 234 − 230 = 4, and atomic number difference = 92 − 90 = 2. These correspond to an α particle.

6. B—Mass number = 238 − 4 = 234, and atomic number = 92 − 2 = 90.

3. C—Alpha particles are the least penetrating, and gamma rays are the most penetrating. 4. C—Mass difference = 236 − 4(1) − 136 = 96. Atomic number difference = 92 − 4(0) − 53 = 39.

7. C—After one half-life, 50% would remain. After another half-life this would be reduced by one-half to 25%. The total amount decayed is 75%. Thus, 24.6 yr must be two half-lives of 12.3 yr each.


U Rapid Review G

G

Know how nuclear equations are balanced: The same sums of both mass and atomic numbers appear on both sides of the equation. Know the five naturally occurring decay modes: 4 1. Alpha emission, in which a helium nucleus, 2 He , is emitted from the nucleus. 0 2. Beta emission in which an electron, −1e, is emitted from the nucleus. This is due to the conversion of a neutron into a proton plus the beta particle. 3. Gamma emission, in which high-energy electromagnetic radiation is emitted from the nucleus. This commonly accompanies the other types of radioactive decay. It is due to the conversion of a small amount of matter into energy. 0 4. Positron emission, in which a positron, +1 e , a particle having the same mass as an electron but a positive charge, is emitted from the nucleus. This is due to a proton converting into a neutron and the positron. 5. Electron capture, in which an inner-shell electron is captured by a proton in the nucleus with the formation of a neutron. X-rays are emitted as the electrons cascade down to fill the vacancy in the lower energy level.

G

G

G

Know that nuclear stability is best related to the neutron-to-proton ratio (n/p), which starts at about 1/1 for light isotopes and ends at about 1.5/1 for heavier isotopes with atomic numbers up to 83. All isotopes of atomic number greater than 84 are unstable and will commonly undergo alpha decay. Below atomic number 84, neutron-poor isotopes will probably undergo positron emission or electron capture, while neutron-rich isotopes will probably undergo beta emission. Know that the half-life, t 1/2, of a radioactive isotope is the amount of time it takes for one-half of the sample to decay. Know how to use the appropriate equations to calculate amounts of an isotope remaining at any given time, or use similar data to calculate the half-life of an isotope. Know how to use Einstein’s equation E = mc 2 to calculate the amount of energy produced from a mass defect (the amount of matter that was converted into energy).

CHAPTER

18

Organic Chemistry IN THIS CHAPTER Summary: Organic chemistry is the study of the chemistry of carbon. Almost all the compounds containing carbon are classified as organic compounds. Only a few—for example, carbonates and cyanides—are classified as inorganic. It used to be thought that all organic compounds had to be produced by living organisms, but this idea was proven wrong in 1828 when German chemist Friedrich Wöhler produced the first organic compound from inorganic starting materials. Since that time, chemists have synthesized many organic compounds found in nature and have also made many never found naturally. It is carbon’s characteristic of bonding strongly to itself and to other elements in long, complex chains and rings that gives carbon the ability to form the many diverse and complex compounds needed to support life. KEY IDEA

Keywords and Equations

No keywords or equations specific to this chapter are listed on the AP exam.

Alkanes Alkanes are members of a family of organic compounds called hydrocarbons, compounds of carbon and hydrogen. These hydrocarbons are the simplest of organic compounds, but are extremely important to our society as fuels and raw materials for chemical industries. We heat our homes and run our automobiles through the combustion (burning) of these hydrocarbons. Paints, plastics, and pharmaceuticals are often made from hydrocarbons. Alkanes are hydrocarbons that contain only single covalent bonds within their molecules. They are called saturated hydrocarbons because they are bonded to the maximum number of other atoms. These alkanes may be straight-chained hydrocarbons, in which the carbons are sequentially bonded; branched hydrocarbons, in which another hydrocarbon group is bonded to the hydrocarbon “backbone”; or they may be cyclic, in which the hydrocarbon is composed entirely or partially of a ring system. The straight-chained and branched

268 U

Organic Chemistry Í 269

alkanes have the general formula of Cn H2n+2, whereas the cyclic alkanes have the general formula of Cn H2n. The n stands for the number of carbon atoms in the compound. The first 10 straight-chained alkanes are shown in Table 18.1. There can be many more carbon units in a chain than are shown in Table 18.1, but these are enough to allow us to study alkane nomenclature: the naming of alkanes.

Alkane Nomenclature The naming of alkanes is based on choosing the longest carbon chain in the structural formula, then naming the hydrocarbon branches while indicating onto which carbon that branch is attached. Here are the specific rules for naming simple alkanes: 1. Find the continuous carbon chain in the compound that contains the most carbon atoms. This will provide the base name of the alkane. 2. This base name will be modified by adding the names of the branches (substituent groups) in front of the base name. Alkane branches are named by taking the name of the alkane that contains the same number of carbon atoms, dropping the –ane ending and adding –yl. Methane becomes methyl, propane becomes propyl, etc. If there is more than one branch, list them alphabetically. Table 18.1

The First Ten Straight-Chained Alkanes

NAME

MOLECULAR FORMULA

STRUCTURAL FORMULA

methane

CH4

CH4

ethane

C2H6

CH3-CH3

propane

C 3 H8

CH3-CH2-CH3

butane

C4H10

CH3-CH2-CH2-CH3

pentane

C5H12

CH3-CH2-CH2-CH2-CH3

hexane

C6H14

CH3-CH2-CH2-CH2-CH2-CH3

heptane

C7H16

CH3-CH2-CH2-CH2-CH2-CH2-CH3

octane

C8H18

CH3-CH2-CH2-CH2-CH2-CH2-CH2-CH3

nonane

C9H20

CH3-CH2-CH2-CH2-CH2-CH2-CH2-CH2-CH3

decane

C10H22

CH3-CH2-CH2-CH2-CH2-CH2-CH2-CH2-CH2-CH3

3. The position where a particular substituent is attached to the chain is indicated by a location number. These numbers are assigned by consecutively numbering the carbons of the base hydrocarbon, starting at one end of the hydrocarbon chain. Choose the end that will result in the lowest sum of location numbers for the substituent groups. Place this location number in front of the substituent name and separate it from the name by a hyphen (for example, 2-methyl). 4. Place the substituent names with their location numbers in front of the base name of the alkane in alphabetical order. If there are identical substituents (two methyl groups, for example), give the location numbers of each, separated by commas using the common Greek prefixes (di-, tri-, tetra-, etc.) to indicate the number of identical substituent groups (i.e. 2,3-dimethyl). These Greek prefixes are not considered in the alphabetical arrangement.

270 U Step 4. Review the Knowledge You Need to Score High 5. The last substituent group becomes a part of the base name as a prefix. Studying Figures 18.1 and 18.2 may help you learn the naming of substituted alkanes.

Structural Isomerism Compounds that have the same molecular formulas but different structural formulas are called isomers. With hydrocarbons, this applies to a different arrangement of the carbon atoms. Isomers such as these are called structural isomers. Figure 18.3 shows the structural isomers of C5H12. Note that there are the same number of carbons and hydrogens in each structure. Only the way the carbons are bonded is different. In writing structural isomers, or any other organic compounds, remember that carbon forms four bonds. One of the most common mistakes that a chemistry student makes is writing an organic structure with a carbon atom having fewer or more than four bonds.

CH3

CH2

CH2

CH

CH2

CH

CH3

CH3

CH2 CH3

7

6

5

4

3

2

CH3

CH2

CH2

CH

CH2

CH

heptane

1

CH3

CH3

CH2 ethyl group

methyl group CH3 4-ethyl-2-methylheptane

Figure 18.1

Naming an alkane. CH3 CH2

CH3

CH2

CH2

CH2

C

CH3 CH2

C

CH2

CH3

CH3

CH2 CH2 CH2

9

8

7

6

CH3

CH2

CH2

CH2

CH3

ethyl

CH2

CH3

5

C CH2

methyl

4

3

2

1

CH2

C

CH2

CH3

CH3

CH2 propyl

methyl

CH2

5-ethyl-3,3-dimethyl-5-propylnonane

Figure 18.2

Naming of another alkane.

nonane

Organic Chemistry Í 271 H H

H

H

H

H

H

H

C

C

C

C

C

H

H

H

H

H

H

H

H

H

H

H

C

C

C

C

H

H

H H

C

H

H

C

H

C

C

H

H C

H

H

2-Methylbutane

Figure 18.3

H H

H

H

H Pentane

C

H

2,2-Dimethylpropane

Structural isomers of C5H12.

Here is a practice problem. Name the following compound: H H H C H H H C H

C

C

H C H H

H

H

H

H

C

C

C

C H

H H C H H H

H H

H H C C

C H

H H

H

Answer: 5-ethyl-2,2-dimethylnonane Solution: First, pick the longest chain. This is bold-faced in the diagram below. The carbons are attached by single bonds, so this is an alkane. Because the longest chain has nine carbons, it is a nonane. H

H

H H C H H

H

H

H

H

C

C

C

C

C H

C

C

H H C H H

H H C HH H

H H

H H C C H H

C H H

Next, the longest chain should be numbered from one end to the other with the lowest number(s) going to the branches. For the above example the numbering of the chain (bold-face carbon atoms) would be: 1 2 3 4 5 6 7 8 9 Once these numbers have been assigned, do not alter them later.

272 U Step 4. Review the Knowledge You Need to Score High All carbon atoms that are not part of the nine-atom main chain are branches. Branches have -yl endings. It may help you to circle the carbon atoms belonging in the branches. In the above example, there are three branches. Two consist of only one carbon and are called methyl groups. The remaining branch has two carbons, so it is an ethyl group. The branches are arranged alphabetically. If there is more than one of a particular type, use a prefix (di-, tri, tetra-, etc.). The two methyl groups are designated dimethyl. The position of each branch is indicated with a number already determined for the main chain. Each branch must get its own number, even if it is identical to one already used. In the above example this gives: 5-ethyl-2,2-dimethylnonane a. ethyl before methyl (alphabetical—prefixes are ignored) b. two methyl groups = dimethyl c. three branches = three numbers Numbers are separated from other numbers by commas, and numbers are separated from letters by a hyphen. Another type of isomerism is optical isomerism. These molecules are capable of rotating light to either the left or right and are said to be optically active. The presence of an asymmetric or chiral carbon (a carbon atom with four different groups attached to it) will make a compound optically active.

Common Functional Groups If chemistry students had to learn the properties of each of the millions of organic compounds, they would face an impossible task. Luckily, chemists find that having certain arrangements of atoms in an organic molecule causes those molecules to react in a similar fashion. For example, methyl alcohol, CH3-OH, and ethyl alcohol, CH3-CH2-OH, undergo the same types of reactions. The −OH group is the reactive part of these types of molecule. These reactive groups are called functional groups. Instead of learning the properties of individual molecules, one can simply learn the properties of functional groups. In our study of the simple hydrocarbons, there are only two functional groups. One is a carbon-to-carbon double bond. Hydrocarbons that contain a carbon-to-carbon double bond are called alkenes. Naming alkenes is very similar to naming alkanes. The major difference is that the carbon base has an -ene ending instead of the -ane ending. The carbon backbone of the base hydrocarbon is numbered so the position of the double bond has the lowest location number. The other hydrocarbon functional group is a carbon-to-carbon triple bond. Hydrocarbons that contain a triple bond are called alkynes. Alkynes use the -yne ending on the base hydrocarbon. The presence of a double or triple bond make these hydrocarbons unsaturated. The introduction of other atoms (N, O, Cl, etc.) to organic compounds gives rise to many other functional groups. The major functional groups are shown in Table 18.2.

Macromolecules As we mentioned in the introduction to this chapter, carbon has the ability to bond to itself in long and complex chains. These large molecules, called macromolecules, may have


Table 18.2

Common Functional Groups

FUNCTIONAL GROUP

COMPOUND TYPE

SUFFIX OR PREFIX OF NAME

alkene

-ene

alkyne

-yne

H C

C

C

C

SYSTEMATIC NAME (COMMON NAME)

EXAMPLE H C H H

ethene (ethylene)

C H

C

C

H

ethyne (acetylene)

O

H

methanol (methyl alcohol)

H C

O

H

alcohol

-ol

H

C H H

C

X

(X=halogen)

haloalkane

halo-

H

C

chloromethane (methyl chloride)

Cl

H

C

amine

N

O C

aldehyde

H

-amine

-al

H

H

H

H

C

C

N

H

H

H

H

O

C

C

ethylamine

H

ethanal (acetaldehyde)

H

H

O C

C

C

ketone

-one

H

H

O

H

C

C

C

H

O C

O

H

carboxylic acid

-oic acid

H

O

C

ester

-oate

H

O N

amide

H

ethanoic acid (acetic acid)

H

H

O

C

C

O

H

O

C

C

H O

H

C

propanone (acetone)

H

O C

H

-amide

H

H

H

O

C

C

H

C

N H

H

H

methyl ethanoate (methyl acetate)

ethanamide (acetamide)

274 U Step 4. Review the Knowledge You Need to Score High molecular masses in the millions. They are large, complex molecules, but most are composed of repeating units called monomers. Figure 18.4 shows two macromolecules, cellulose and nylon, and indicates their repeating units. Macromolecules are found in nature. Cellulose, wool, starch, and DNA are but a few of the macromolecules that occur naturally. Carbon’s ability to form these large, complex molecules is necessary to provide the diversity of compounds needed to make up a tree or a human being. But many of the useful macromolecules that we use every day are created in the lab and industrial complex by chemists. Nylon, rayon, polyethylene, and polyvinyl chloride are all synthetic macromolecules. They differ by which repeating units (monomers) are joined together in the polymerization process. Our society has grown to depend on these plastics, these synthetic fabrics. The complexity of carbon compounds is reflected in the complexity of our modern society. H

CH2OH H

HO H

O

Cellulose

H

H

CH2OH

O

OH H

H HO H

O H

H O

OH

CH2OH

H

H HO

O H

H O

OH

H

CH2OH

H

H HO H

Repeating unit

O

OH H

O

O HO

O H

(CH2)4

C

C

NH

(CH2)6

NH

H n

Nylon

Figure 18.4

Two macromolecules.


Experiment 22 in the Experimental chapter applies the concepts of organic chemistry in a synthesis situation.


1. When writing organic formulas, make sure that every carbon has four bonds. 2. When naming alkanes, make sure to number the carbon chain so the sum of all location numbers is as small as possible. 3. When naming branched alkanes, be sure to consider the branches when finding the longest carbon chain. The longest chain isn’t always the one in which the carbon atoms all lie in a horizontal line. 4. In naming identical substituents on the longest carbon chain, be sure to use repeating location numbers, separated by commas (2,2-dimethyl). 5. Be sure that every carbon has four bonds!


U Review Questions You have 5 minutes. You may not use a calculator. You may use the periodic table at the back of the book. For each question, circle the letter of your choice. 1. Cycloalkanes are hydrocarbons with the general formula Cn H2n. If a 0.500 g sample of any alkene is combusted in excess oxygen, how many moles of water will form? (A) 0.50 (B) 0.072 (C) 0.036 (D) 1.0 (E) 0.018 2.

O–H | CH3 – CH– CH2 –CH3

The organic compound shown above would be classified as (A) an organic base (B) an ether (C) an alcohol (D) an aldehyde (E) a ketone

3. Which of the following compounds is optically active? (A) CH3CHClCH2CH2CH3 (B) CH3CH=CHCH2CH3 (C) CH3CH2CHClCH2CH3 (D) CH3CH2CH2CH2OH (E) CH3CH2CH2CH2CH3 4. A carboxylic acid may be represented as: (A) ROH (B) RCHO (C) R-O-R′ (D) RCOOH (E) RCOOR′

U Answers and Explanations 1. C—The general formula, Cn H2n, means that 1 mol of H2O will form per mole of empirical formula unit, regardless of the value of n. The moles of water formed is the mass of the alkene divided by the empirical formula mass. (0.500 g alkene)(l mol alkene/14 g alkene)(l mol H2O/mol alkene) = 0.036 mol 2. C—Organic bases are, in general, amines (contain N). An ether would have an oxygen single-bonded to two carbons (R groups). An aldehyde has oxygen double-bonded to a carbon at the end of a chain. Aldehydes (RCHO) and

alcohols (ROH) are often confused, because of the similarity in their general formulas. Ketones have oxygen double-bonded to a carbon not at the end of a chain. 3. A—Redrawing the structures may help you to recognize the correct answer. An optical isomer must be a carbon atom with four different groups attached to it. For A the groups on the second carbon are: CH3−,H, Cl, and −CH2CH2CH3. Answer C is misleading. It is similar to A, but two of the groups, the −CH2CH3 groups, are the same. 4. D—A = alcohol B = aldehyde C = ether E = ester


U Free-Response Questions You have 20 minutes to do the following questions. You may use a calculator and the tables at the back of the book. The alkane hexane, C6H14, has a molecular mass of 86.17 g/mol. a. Like all hydrocarbons, hexane will burn. Write a balanced chemical equation for the complete combustion of hexane. This reaction produces gaseous carbon dioxide and water. b. The complete combustion of 10.0 g of hexane produces 487 kJ. What is the molar heat of combustion (ΔH) of hexane? c. Determine the pressure exerted by the carbon dioxide formed when 5.00 g of hexane are combusted. Assume the carbon dioxide is dry and stored in a 20.0-L container at 27°C. d. Under identical conditions, hexane vapor diffuses at one-half the rate of the vapor of another compound. What is the molar mass of the other compound? e. Hexane, like most alkanes, may exist in different isomeric forms. The structural formula of one of these isomers is pictured below. Draw the structural formula of any two other isomers of hexane. Make sure all carbon atoms and hydrogen atoms are shown.

H

H

H H

H

H

H

C

C C

C

C

C H

H

H H

H

H

H

U Answers and Explanations a. 2C6H14 + 19O2→12CO2 + 14H2O Give yourself 2 points for the answer shown above, or for the coefficients: 1, 9/2, 6, and 7. Give yourself 1 point if you have one or more, not all, of the elements balanced. 3 b. (–487 kJ/10.0 g hexane) (86.17 g hexane/mol hexane) = −4.20 × 10 kJ/mol

Give yourself 2 points for the above setup and correct answer (this requires a negative sign in the answer). If the setup is partially correct, give yourself 1 point. c. The ideal gas equation should be rearranged to the form P = nRT /V. n = (5.00 g hexane) (1 mol hexane/86.17 g hexane) (12 mol CO2/2 mol hexane) = 0.3481 mol CO2 This answer has an extra significant figure. The mole ratio should match the one given in your balanced equation. You will not be penalized again for an incorrectly balanced equation. You will lose a point if you do not include a hexane-to-CO2 conversion. R = 0.0821 L atm/mol K This value is given in your test booklet. T = 27° + 273 = 300. K You will be penalized if your forget to use the Kelvin temperature. V = 20.0 L P = (0.3481 mol CO2) (0.0821 L atm/mol K) (300. K)/(20.0 L)= 0.429 atm. Give yourself 2 points for the correct setup and answer. Give yourself 1 point if you did everything correctly, except the mole ratio or the Kelvin conversion.


d. This part requires Graham’s law: r1/r2 = (M2/M1)1/2 If we let “1” refer to hexane, and “2” refer to the unknown vapor, then: r1 = (1/2)r 2, and M1 = 86.17 g/mol. When these values are entered into the equation:

(1 2)r

2

r2

(

= M 2 /86 .17 g/mol

)

12

Canceling and then squaring both sides gives: (1/2)2 = (1/4) = M2/86.17 g/mol M2 = (1/4)(86.17 g/mol) = 21.54 g/mol Give yourself 2 points for the correct setup and the correct answer. It is not necessary to show all the intermediate steps. Give yourself 1 point if you make a mistake. e. You may need to redraw one or more of your answers to match the answers shown below. Give yourself 1 point for each correct answer, with a 2-point maximum. There are no bonus points for additional answers. H

H H

H

H

H H

H C

C

C

C C H

HH C H H

H H

H H

H

H H

H C C

C

C C H

H

H H C H H H H

H

H H C H H H H C

C

C C H

H H C H H H

H

H

H C H

H C

C

C

C H

H

H

H H C H

H

H

H

These compounds are 2-methylpentane, 3-methylpentane, 2,2-dimethylbutane and 2,3-dimethylbutane, respectively. These four, along with the original n-hexane, are the only isomers. If you think you have another isomer, you have simply redrawn one of these. Try naming your answer and see if it matches one of these names. Total your points. The maximum is 10 points. Subtract one point if all your answers do not have the correct number of significant figures.

U Rapid Review G

Organic chemistry is the chemistry of carbon and its compounds.

G

Hydrocarbons are organic compounds of just carbon and hydrogen atoms.

G

Alkanes are hydrocarbons in which there are only single bonds.

G

Alkanes are named in a very systematic way. Review the rules for naming alkanes.

G

G

G

Isomers are compounds that have the same molecular formulas but different structural formulas. Review the writing of the various structural isomers of alkanes. Make sure that each carbon atom has four bonds. A functional group is a group of atoms that is the reactive part of the molecule. Review the general functional groups. Macromolecules are large molecules that may have molecular masses in the millions. Macromolecules are generally composed of repeating units called monomers.

CHAPTER

19

Experimental IN THIS CHAPTER Summary: The free-response portion of the AP exam will contain a question concerning an experiment, and there may also be a few multiple-choice questions on one or more of these experiments. This chapter reviews the basic experiments that the AP Exam Committee believes to be important. You should look over all of the experiments in this chapter and pay particular attention to any experiments you did not perform. In some cases you may find, after reading the description, that you did a similar experiment. Not every AP class does every experiment, but any of these experiments may appear on the AP exam. The free-response questions on recent exams have been concerned with the equipment, measurements, and calculations required. In some cases, sources of error are considered. To answer the question completely, you will need an understanding of the chemical concepts involved. To discuss an experiment, you must be familiar with the equipment needed. In the keywords section at the beginning of this chapter is a complete list of equipment for the experiments. Make sure you are familiar with each item. You may know an item by a different name, or you may need to talk to your teacher to get additional information concerning an item. In some cases, the exam question will request a list of the equipment needed, while in other cases you will get a list from which to choose the items you need. Certain items appear in many experiments. These include the analytical balance, beakers, support stands, pipets, test tubes, and Erlenmeyer flasks. Burets, graduated cylinders, clamps, desiccators, drying ovens, pH meters, volumetric flasks, and thermometers are also commonly used. If you are not sure what equipment to choose, these serve as good guesses. Most of the remaining equipment appears in three or fewer experiments. KEY IDEA

278 U

You will need to know the basic measurements required for the experiment. For example, you may need to measure the initial and final temperatures. Do not make the mistake of saying you measure the change in temperature.

Experimental Í 279 You calculate the change in temperature from your measured initial and final temperatures. You do not need to give a lot of detail when listing the required measurements, but you need to be very specific in what you measure. Many students, have lost exam points for not clearly distinguishing between measured and calculated values. The basic calculations fall into two categories. Simple calculations, such as the change in temperature or the change in volume, are the easiest to forget. Simple calculations may also include mass-to-mole conversions. The other calculations normally involve entering values into one of the equations given at the beginning of the previous chapters of this book. Beginning with the 2007 AP Chemistry exam, experimental questions may be incorporated into any of the free-response questions. This means that you will need to have a good understanding of the experiments in order to discuss not only the experiment itself, but the underlying chemical concepts. Therefore, when studying each experiment, refer back to the appropriate material to review the concepts involved.

KEY IDEA

Keywords and Equations Pay particular attention to the specific keywords and equation in the chapters associated with the individual experiments.

A = abc (A = absorbance; a = molar absorbtivity; b = path length; c = concentration) analytical balance buret capillary tubes crucible and cover drying oven evaporating dish forceps hot plate Meker burner pipet rubber tubing stopwatch test-tube rack triangle crucible support wash bottle wire gauze

barometer burner centrifuge cuvettes electrodes filter crucibles and adapters funnel ice mortar and pestle power supply (battery) spectrophotometer support stand thermometer voltmeter watch glass

beaker(s) calorimeter clamp desiccator Erlenmeyer flask filter flasks graduated cylinder ion exchange resin or silica gel pH meter Pt or Ni test wire stirrer test tube(s) tongs volumetric flask water bath

Experiment 1: Finding the Formula of a Compound Synopsis The formula of a compound is determined by using the mass of the original substance, usually a metal, and the mass of a compound of that substance, usually an oxide. (See the chapter on Stoichiometry.)

Equipment analytical balance support stand

burner tongs

crucible and cover triangle crucible support


Beaker

Erlenmeyer flask

Graduated cylinder

Thermometer

Test tube

Filter (suction) flask

Buret

Pipet

Test tube brush

Funnel

Buchner funnel Crucible and cover

Figure 19.1

Common Laboratory Equipment.

Eye dropper

Experimental Í 281

Crucible tongs

Test tube holder

Bunsen burner

Ring support

Utility clamp

Clay triangle

Ring stand with support

Buret clamp

Wire gauze

Evaporating dish

Watch glass

Hotplate

Top-loading electronic balance

Desiccator

Spectrophotometer

Figure 19.1

(Continued )


Measurements 1. the mass of the crucible and cover 2. the mass of the original sample and the crucible and cover 3. the mass of the reacted sample and the crucible and cover The last measurement must be done after the sample has cooled to room temperature.

Calculations The mass of the sample is calculated by taking the difference between masses 1 and 2. The mass of the substance that combined with the original substance is calculated from the difference between masses 2 and 3. The moles of the substances must be calculated by dividing each mass by the molar mass of the substance. The empirical formula is calculated from the simplest ratio of the moles of the elements present.

Comments This procedure will allow you to calculate the empirical formula of the substance. The experiment is often performed by reacting magnesium metal with atmospheric oxygen to form magnesium oxide.

Experiment 2: The Percentage of Water in a Hydrate Synopsis The amount of water present in a sample is determined by weighing a compound before and after heating. The difference in mass is due to the loss of water. (See the chapter on Stoichiometry.)

Equipment analytical balance support stand triangle crucible support

burner test tube(s) wire gauze

crucible and cover tongs

Measurements 1. the mass of the crucible and cover 2. the mass of the original sample and the crucible and cover 3. the mass of the heated (dried) sample and the crucible and cover The last measurement must be done after the sample has cooled to room temperature.

Calculations The mass of the hydrate is calculated from the difference between masses 1 and 2. The mass of the water lost is calculated from the difference between masses 2 and 3. The percentage of water is calculated by dividing the mass of the water lost by the mass of the hydrate and multiplying the result by 100%. A variation of this experiment uses the mass of the anhydrous material (calculated from the difference between masses 1 and 3). The moles of the anhydrous material and water are then calculated from their respective masses and molar masses. The simplest ratio of the moles gives the empirical formula.

Experimental Í 283

Comments The experiment often uses hydrates of copper(II) sulfate, magnesium sulfate, calcium sulfate, or barium chloride.

Experiment 3: Molar Mass by Vapor Density Synopsis The molar mass (molecular mass) of a volatile substance is determined in this experiment. The mass of a sample of vapor is initially determined. This mass, along with the volume of the container, the pressure, and the temperature, is used with the ideal gas equation to calculate the molar mass. (See the chapter on Gases.)

Equipment analytical balance clamp support stand

barometer Erlenmeyer flask

beaker(s) graduated cylinder

Measurements 1. 2. 3. 4. 5.

the mass of the flask the mass of the flask plus condensed vapor the temperature of the water bath used to heat the flask the barometric pressure the number of milliliters of water required to fill the flask

Calculations There are a variety of ways to do the calculations. Most of these, however, involve the calculation of the number of moles (n) from the ideal gas equation: n = PV /RT. The mass of the vapor sample is calculated from the difference between measurements 1 and 2. The temperature (measurement 3) is converted to kelvin. The pressure (measurement 4) is converted to atmospheres. Measurement 5 is converted to liters. Inserting the various numbers into the ideal gas equation allows you to calculate the number of moles. The molar mass is calculated by dividing the mass of the sample by the moles.

Comments Variations in this experiment usually combine the ideal gas equation with the mass of the sample.

Experiment 4: Molar Mass by Freezing-Point Depression Synopsis The molar mass (molecular mass) of a solute is determined by measuring its effect on the freezing point of a solvent. A cooling curve is constructed by plotting the temperature of a solution that is slowly cooling versus time. After the solution completely freezes, the difference between the solution’s freezing point and the pure solvent’s freezing point is calculated. The change in the freezing point is then related to the molality of the solution. (See Chapters 6 and 13.)

284 U Step 4. Review the Knowledge You Need to Score High Thermometer Stirrer

Solute + Solvent

Figure 19.2

Freezing-Point Depression Apparatus.

Equipment beaker(s) stirrer thermometer wire gauze

ice stopwatch support stand

pipet test tube(s) clamp

Measurements 1. the mass of the empty test tube 2. the mass of the test tube plus the solvent 3. the mass of the test tube plus solute plus solvent The solid solvent or solution is heated above its melting point and then allowed to cool. 4. repeated measurements of the temperature 5. the times at which the preceding measurements were made The above series of measurements is done one time for the solvent and one time for the solution, or the melting point of the solvent may be obtained (not measured) from a table.

Calculations The mass of the solvent is calculated from the difference between measurements 1 and 2. The mass of the solute is calculated from the differences between masses 2 and 3. The mass of the solvent is converted to kilograms. The temperature and time measurements (4 and 5) are plotted, and a smooth curve is drawn. The temperature difference between the “level” regions of the solvent plot and the solution plot (or the difference between the solution plot and the tabulated freezing point of

Experimental Í 285

the solvent) is used to calculate the change in temperature (ΔT ) between the freezing point of the solvent and the solution. The change in temperature divided by the freezing-point depression constant (from a table) will give the molality of the solution. The molality of the solution times the kilograms of solvent yields the moles of solute. Finally, the mass of the solute divided by the moles of solute gives its molar mass.

Comments One variation in this experiment is to add the solute to the test tube before the solvent.

Experiment 5: Molar Volume of a Gas Synopsis The volume occupied by a mole of a gas is calculated in this experiment. A sample of a solid substance is heated, decomposing it into several products, including a gas. The mass of the gas is determined by the weight difference of the solid before and after heating and is then converted to moles. The volume of the gas, the pressure, and temperature are measured. (See the chapter on Gases.)

Equipment analytical balance clamp rubber tubing

barometer Erlenmeyer flask test tube(s)

beaker(s) graduated cylinder thermometer

Measurements 1. the barometric pressure 2. the mass of the test tube plus solid sample (before the reaction) 3. the mass of the test tube plus sample after the reaction 4. the temperature of the water 5. volume of water displaced into the beaker, if the variation is used The mass of the test tube after the reaction must be determined after the test tube has completely cooled to room temperature.

Calculations The temperature must be converted to kelvin (T1), and the volume of water is normally expressed in liters. The mass of gas generated is calculated by taking the difference between measurements 2 and 3. Using the molar mass of the gas, the mass of gas is converted to moles of gas (n). For the variation, the vapor pressure of water at the recorded temperature is found in a table. The pressure of the gas (P1) is the difference between the value in the table and measurement 1. The volume of water in the beaker is the volume of the gas (V1). Calculate the volume (V2) of the gas at STP (T2 and P2) using the combined gas law. The molar volume of the gas is the volume at STP (V2) divided by the moles of gas (n).

Comments The most common procedure is to produce oxygen gas by decomposing KClO3. A common variation is to measure the volume of gas produced by displacing water from a flask. The volume of water displaced is the volume of gas generated at that temperature and pressure. From a measurement of the atmospheric pressure and the temperature of the gas, the volume of gas at STP can be calculated.


Experiment 6: Standardization of a Solution Synopsis The concentration of a solution is determined by titration with a sample of known composition. (See the Stoichiometry chapter.)

Equipment analytical balance drying oven pipet wash bottle

buret Erlenmeyer flask support stand clamp

desiccator pH meter volumetric flask

Refer to figure 19.3 for general titration set-up.

Measurements 1. the mass of an empty flask 2. the mass of the flask plus the sample 3. the initial reading of the buret 4. intermediate readings from the buret 5. the final reading of the buret 6. the pH of the solution at various times during the reaction

Calculations The mass of the sample is calculated from the differences between masses 1 and 2. The volume added is calculated by taking the difference between measurement 3 and either measurement 4 or 5. A plot of pH versus the volume added is made. This graph or the difference between measurements 3 and 5 gives the volume of titrant. The volume of titrant is converted to liters. The mass of the sample is converted to moles by using the molar mass. The moles of titrant may be calculated from a consideration of the moles of sample and the balanced chemical equation. The moles of titrant divided by the liters of solution gives the molarity of the solution.

Comments A solution could be prepared by dissolving a known amount of solute in a volumetric flask and diluting to volume. The course of the titration could be followed with an acid–base indicator instead of a pH meter.

Experiment 7: Acid–Base Titration Synopsis The concentration of an acid or a base may be determined by titrating a solution of an unknown concentration with a solution of a known concentration. (See the chapter on Reactions and Periodicity and the chapter on Stoichiometry.)

Equipment analytical balance desiccator pH meter wash bottle

buret drying oven pipet

clamp Erlenmeyer flask support stand

Experimental Í 287

Buret containing base (or acid)

Stopcock

Acid (or base) and indicator

Figure 19.3

General acid–base titration set-up

Measurements 1. the volume of the solution of acid or base using a pipet 2. the initial reading of the buret 3. intermediate readings from the buret 4. the final reading of the buret 5. the pH of the solution at various times during the reaction

Calculations The volume added is calculated by taking the difference between measurement 2 and either measurement 3 or 4. A plot of pH versus the volume added is made. This graph or the difference between measurements 2 and 3 gives the volume of titrant. The volume of titrant is converted to liters. The pipeted volume is converted to moles by multiplying the liters of solution by its molarity. The moles of titrant are determined using the mole ratio in the balanced chemical equation for the acid–base reaction. The molarity of the solution is calculated by dividing the moles of titrant by the liters of titrant used.

Comments It does not matter whether an acid is titrated by a base or vice versa.

Experiment 8: Oxidation–Reduction Titration Synopsis The concentration of either an oxidizing or a reducing agent may be determined by titrating a solution of an unknown concentration versus a solution of a known concentration or containing a known mass of solute. (See the Stoichiometry chapter.)


Equipment analytical balance desiccator pH meter wash bottle

buret drying oven pipet volumetric flask

clamp Erlenmeyer flask support stand

Measurements 1. the volume of a solution of an oxidant or reductant using a pipet 2. the initial reading of the buret 3. the final reading of the buret at the endpoint of the titration

Calculations The volume of titrant added is calculated by the difference between measurements 2 and 3. The volume of titrant is then converted to liters. The pipeted volume is converted to moles by multiplying the liters of solution by its molarity. The moles of titrant are determined from the mole ratio in the balanced chemical equation for the reaction. The molarity of the solution is calculated by dividing the moles of titrant by the liters of titrant used.

Comments Common oxidants are potassium permanganate and potassium dichromate. Iron(II) and oxalates are commonly chosen as reductants. Refer to Figure 19.3 for general titration set-up.

Experiment 9: Mass/Mole Relationships in a Chemical Reaction Synopsis The initial masses of various reactants may be determined and then converted to moles. A similar calculation may be done for the products. (See the Stoichiometry chapter.)

Equipment analytical balance Erlenmeyer flask

beaker(s) graduated cylinder

desiccator hot plate

Measurements 1. mass of samples of different reactants 2. mass of samples of different products

Calculations Convert the masses of the reactants and products to moles using their molar masses. Using the mole ratios from the balanced chemical equation, it is possible to determine how much material should react or be produced. These calculated values can be compared to the observed values.

Comments Nearly any reaction may be used.

Experimental Í 289

Experiment 10: Finding the Equilibrium Constant Synopsis The value of an equilibrium constant is calculated by measuring (or calculating) the equilibrium concentrations of the reactants and products. A calibration curve is constructed by measuring the absorbance of a colored solution versus its concentration. Known quantities of the reactants are mixed, and the calibration curve is used to determine the concentration of the colored substance in the resultant solution. (See the Equilibrium chapter.)

Equipment analytical balance test tube(s) or cuvettes

pipet volumetric flask

spectrophotometer

Spectrophotometers Some of the AP recommended experiments require the use of a spectrophotometer. A spectrophotometer is an instrument that is used to measure the amount of light absorbed (or percentage transmitted) by a particular solute in a solution. In order to determine the absorbance (A) of a sample, the instrument is set to a particular wavelength; a solution, contained in a holder called a cuvette, is placed in a sample chamber and an absorbance reading is taken. This procedure may be repeated for other solutions or wavelengths. The cuvette is a standard size to ensure a given path length (b). A plot of absorbance versus wavelength may be used to identify a component of a solution or to determine the wavelength of maximum absorbance (maximum molar absorptivity = a). A more common plot is one of absorbance versus concentration. For this type of plot the instrument is set at the wavelength of maximum molar absorptivity and the absorbances of solutions of various known concentrations (c) are measured. This plot should be a straight line. This linear relationship is called Beer’s law and has the form of A = abc. The concentration of an unknown solution may be determined by measuring its absorbance and using the plot to find its concentration.

Measurements Calibration Curve

Quantities of one or more reactants are pipeted into a volumetric flask. The solutions are diluted to a known volume in the volumetric flask. Measurements of the absorbance are made with a spectrophotometer. Equilibrium Concentrations

Different quantities of various reactants are pipeted into a volumetric flask and diluted to a known volume. Measurements of the absorbance of these solutions are made with a spectrophotometer.

Calculations Calibration Curve

The concentration of the absorbing species is calculated using the initial pipeted volumes and the final volumetric flask volume. These concentrations are plotted versus the absorbance of the solution. Equilibrium Concentrations

The final concentration of each reactant is calculated from the final volume and the volume and concentration of the solution pipeted into the volumetric flask. The calibration curve is used to find the equilibrium concentration. Using the balanced chemical equation, the equilibrium concentrations of the other substances may be calculated.

290 U Step 4. Review the Knowledge You Need to Score High The equilibrium concentrations are inserted into the reaction quotient expression, and the equilibrium constant is calculated.

Comments Any equilibrium may be used, as long as one substance is colored.

Experiment 11: pH Measurements and Indicators for Acid–Base Titrations Synopsis The acidity of various substances is determined with a pH meter or acid–base indicators. This may also be done by mixing or diluting solutions. (See the Equilibrium chapter.)

Equipment analytical balance pH meter

Erlenmeyer flask pipet

graduated cylinder volumetric flask

Measurements 1. Weigh each acid or base into a volumetric flask, and dilute to volume. 2. Pipet a sample of an acid or base of known concentration into a volumetric flask, and dilute to volume. 3. Pipet dififferent solutions into a flask. 4. Measure the pH of the solutions using a pH meter.

Calculations All weighed samples are converted to moles by using the molar mass, and the moles are divided by the volume of the volumetric flask in liters to yield molarity. The concentrations of the diluted solutions (measurement 2) are calculated by using the dilution equation. The concentrations of the other solutions (measurement 3) are calculated from the balanced chemical equation and the dilution equation. The pH may be estimated by adding an acid–base indicator to any of the prepared solutions. The hydrogen ion concentration, hydroxide ion concentration, or pOH may be calculated from the pH. One or more of these may be used to determine the concentration of all other species in the solution.

Comments The original acids and bases may all be solids or solutions, or a mixture of both.

Experiment 12: The Rate and Order of a Reaction Synopsis The rate equation for a reaction is determined in this experiment. Known quantities of solutions are mixed, and the time required for a change is recorded. (See the Kinetics chapter.)

Experimental Í 291

Equipment analytical balance Erlenmeyer flask stopwatch

buret graduated cylinder support stand

clamp pipet thermometer

Measurements 1. Weigh solid samples. 2. Use a pipet or a buret to measure the volume of any solutions. 3. Use the buret to measure the volume of any gas formed (multiple measurements at different times may be required). 4. Measure the temperature of the solutions. 5. Measure time intervals or record the time after mixing when an observable change occurs. NOTE: When using a buret, an initial and a final measurement are always needed.

Calculations Using the molar mass, calculate the moles of all weighed samples. The moles of substances are converted to molarities by dividing by the volume (in liters) of the solution. Molarities may also be determined from pipet or buret readings using the dilution equation. (If a buret is used, one of the volumes is calculated from the difference between the initial and final readings.) The dilution equation may be needed to calculate the concentration of each reactant immediately after all the solutions are mixed. If a gas is being generated, plot the volume of gas formed versus time. The volume of the gas formed is the difference between the initial buret reading and the buret reading at a particular time. The slope of this graph is the rate. The rate may also be determined by taking the amount of any reactant divided by the time required. Tabulate the concentrations of the reactant solutions and the rates for various trials. The rate law may be determined by comparing values in this table. (See the Kinetics chapter.)

Comments Many types of reaction may be used. The simple recording of the time required for a noticeable change is particularly applicable to “clock” reactions.

Experiment 13: Enthalpy Changes Synopsis In this experiment the heat change associated with a process is calculated. Various substances are added to a calorimeter (usually a polystyrene cup), and the initial and the final temperatures are measured. (See the Stoichiometry chapter.)

Equipment analytical balance thermometer

calorimeter

graduated cylinder

Refer to the figure of a calorimeter in Chapter 9.

Measurements 1. The masses of various substances are determined. 2. The volume of a solution or solvent is determined with a graduated cylinder.

292 U Step 4. Review the Knowledge You Need to Score High 3. Measure the initial temperature. 4. Measure the final temperature.

Calculations The masses are converted to moles using the molar mass. The volumes of solutions may be converted to moles using the molarity. The mass of a solvent or solution may be calculated from the volume and density. A total mass may need to be calculated by adding the individual masses together. The change in temperature (ΔT ) is calculated from the difference between the final and initial temperatures. The energy (joules or calories) is calculated by multiplying the mass times the change in temperature times the specific heat (from a table). The enthalpy change is calculated by dividing the calculated energy by the moles, mass, or some other designated quantity.

Comments Any reaction or phase change may be used.

Experiment 14: Qualitative Analysis of Cations and Anions Synopsis Solutions containing various ions are tested for the presence of certain specified ions. The formation of colors, gases, or precipitates indicates the presence or absence of certain ions. (See the Reactions and Periodicity chapter.)

Equipment beaker(s) funnel test tube(s)

centrifuge mortar and pestle watch glass

evaporating dish Pt or Ni test wire

Measurements This is primarily an observation experiment. No precise measurements are needed.

Calculations No calculations are required.

Comments A wide variety of cations or anions may be used. Many of the results are a simple application of the solubility rules.

Experiment 15: Synthesis and Analysis of a Coordination Compound Synopsis A coordination compound is usually synthesized from a transition metal ion that is in solution. The compound is filtered from the solution and tested in various ways to determine the composition of the substance. (See the Reactions and Periodicity chapter.)

Experimental Í 293

Equipment analytical balance evaporating dish test tube(s) or cuvettes

beaker(s) pipet volumetric flask

Erlenmeyer flask spectrophotometer

Measurements Synthesis

Quantities of the reactants are weighed and added to a beaker. A solvent may or may not be present initially. The mass of the product is determined by weighing. Analysis

Weigh a sample of the compound into a volumetric flask, and dilute to volume. Use a pipet to measure samples to be diluted. Measure absorbency of the diluted solutions with a spectrophotometer. This may or may not require the separate construction of a calibration curve.

Calculations Calculate the moles of each reactant from the masses and molar masses. Then calculate the yield based on the limiting reagent. The mass of the product, determined at the end of the synthesis, divided by the mass calculated from the limiting reagent times 100%, gives the percent yield. There are numerous possible analysis calculations.

Comments Commonly synthesized coordination compounds include K3[Fe(C2O4)3] and [Co(NH3)6]Cl3.

Experiment 16: Gravimetric Analysis Synopsis The amount of a substance present in a sample is determined by taking a solution containing that substance and precipitating a compound containing that substance. The precipitate is then dried and weighed. (See the Stoichiometry chapter.)

Equipment analytical balance desiccator Meker burner

beaker(s) drying oven support stand

crucible and cover funnel triangle crucible support

Measurements 1. 2. 3. 4.

A sample is weighed and then dissolved. Excess (unmeasured) reactant is added to the solution to form a precipitate. The empty crucible and cover are weighed. The crucible and cover containing the dried precipitate are weighed.

Calculations The mass of the precipitate is found as the difference between measurements 3 and 4. The mass of the dried precipitate is converted into moles by using the molar mass. Through use of a stoichiometric ratio, the moles of precipitate are converted to the moles of the substance of interest. The moles of this substance are converted to its mass using the molar mass.

294 U Step 4. Review the Knowledge You Need to Score High The mass of the substance of interest divided by the mass of the sample and then multiplied by 100% gives the percent of a substance in the sample.

Comments Common precipitates used include AgCl and BaSO4.

Experiment 17: Colorimetric Analysis Synopsis This experiment involves determining the amount of a substance in a solution. A calibration curve is constructed plotting the measured absorbance versus the concentration of a colored substance. The concentration of an unknown solution may be determined by reversing this process. (See the Stoichiometry chapter.)

Equipment buret support stand

pipet clamp

spectrophotometer test tube(s) or cuvettes

Measurements Using either a pipet or a buret, quantities of standard solutions are measured. (If a buret is used, separate measurements of the initial and final volumes are needed.) Solvent may be added to dilute the samples if needed. These are the known solutions from which a calibration curve will be constructed. The absorbance of each solution is determined with a spectrophotometer. The absorbance of one or more unknown solutions is determined with a spectrophotometer.

Calculations Concentrations of the known solutions are calculated using the dilution equation. A plot of absorbance versus concentration for the known solutions is made. The plot allows the absorbance of the unknown solution(s) to be converted to concentration.

Comments Any colored substance may be used.

Experiment 18: Chromatographic Separation Synopsis Two or more substances are separated by the differences in their affinity to paper or some other material. This affinity is related to the intermolecular forces between the substances. (See the chapter on Solids, Liquids, and Intermolecular Forces.)

Equipment beaker(s) pipet ion-exchange resin or silica gel

capillary tubes test tube(s) chromatography paper (filter paper)

Experimental Í 295

Capillary tube Solvent (b) Chromatography Development Jar

(a) Spotting the Chromatography Paper

Figure 19.4

Measurements In some cases, the distance a spot travels on the chromatographic media is measured. This requires the use of a ruler.

Calculations There are usually no calculations.

Comments Instead of an ion exchange resin or silica gel, it is possible to use filter paper as a chromatographic medium.

Experiment 19: Properties of Buffer Solutions Synopsis Buffer and non-buffer solutions are prepared. The pHs of these solutions are determined before and after other substances—usually acids or bases—are added. (See the Equilibrium chapter.)

Equipment beaker(s) volumetric flask

pH meter

pipet

Measurements 1. volumes of the pipeted solutions 2. pH of various solutions

Calculations The concentrations of the solutions may be calculated by using the dilution equation. Concentrations may then be converted to moles by multiplying the concentration by the liters of solution. This procedure applies to buffer components or any reactant species. The moles of substances may be determined from the initial moles and stoichiometry. Combined with the liters of solution, these may be used to determine the final concentrations.


Comments The pH values of the solutions may be used in several ways, depending upon the goal of the experiment.

Experiment 20: An Electrochemical Series Synopsis The reactivity of several metals with solutions containing ions of other metals is observed. This experiment involves the development of an activity series. (See the Reactions and Periodicity chapter.)

Equipment beaker(s) test tube(s)

forceps test tube rack

graduated cylinder

Measurements This experiment is based on observations, not measurements.

Calculations Observations, not calculations, are needed.

Comments The more active metal will displace a less active metal from a solution. Hydrogen is usually included in the series by using acids.

Experiment 21: Electrochemical Cells and Electroplating Synopsis Electrochemical cells are constructed, and their cell potentials are determined with a voltmeter. Electroplating is accomplished by using an external power supply, usually a battery, to plate a metal onto an electrode. (See Electrochemistry chapter.)

Equipment beaker(s) filter flasks voltmeter

electrodes power supply (battery)

filter crucibles and adapters test tube(s)

Measurements The cell potentials are measured with a voltmeter. Refer to the figure of the electrochemical cell in Chapter 16.

Calculations Normally, no calculations are required.

Comments Cells may vary in composition or concentrations.

Experimental Í 297

Experiment 22: Synthesis and Properties of an Organic Compound Synopsis Any of a number of chemical reactions can be used to synthesize an organic compound. After synthesis, the compound is purified and tested. (See the chapter on Organic Chemistry.)

Equipment analytical balance capillary tubes evaporating dish thermometer

buret drying oven filter flasks water bath

burner Erlenmeyer flask support stand clamp

Measurements Quantities of reactants are measured by using either mass or volume measurements. In some cases, the mass of the product is measured.

Calculations When the mass of the product (actual yield) is measured, normally a percent yield is required. The mass of the limiting reagent is converted, through moles, to the theoretical yield of product. The percent yield is calculated by dividing the actual yield by the theoretical yield, then multiplying the resulting value by 100%.

Comments Many different compounds could be synthesized.

U Common Mistakes to Avoid TIP

1. You measure initial and final values, but calculate the change. 2. You use an analytical balance to weigh the mass (grams), but not the moles.

U Review Questions Multiple-choice questions concerning experiments have been embedded in the review questions in the appropriate chapters.

U Answers and Explanations None

U Free-Response Questions First Free-Response Question

Answer the following question. You have 15 minutes, and you may not use a calculator. You may use the tables at the back of the book.

298 U Step 4. Review the Knowledge You Need to Score High A water-soluble sample of a solid containing some barium nitrate is to be analyzed for barium. The barium is to be precipitated as barium sulfate. Answer the following questions about this experiment. a. b. c. d.

List the apparatus needed for this experiment. Outline the steps in this experiment. Set up the calculations needed to determine the percent barium in the sample. What changes would be required in the procedure if the original sample also contained lead?

Second Free-Response Question

Answer the following question. You have 15 minutes, and you may not use a calculator. You may use the tables at the back of the book. A sample of a solid, weak monoprotic acid, HA, is supplied, along with solid sodium hydroxide, a phenolphthalein solution, and primary standard potassium hydrogen phthalate (KHP). a. b. c. d. e.

Describe how a standardized sodium hydroxide solution may be prepared for the titration. Sketch a graph showing pH versus volume of base added for the titration. Sketch the titration curve if the unknown acid was really a diprotic acid. Describe the steps to determine K a for HA. What factor determines which indicator should be chosen for this titration?


a. analytical balance desiccator Meker burner

beaker(s) drying oven support stand

crucible and cover funnel triangle crucible support

You get 1 point for the following set: analytical balance, crucible and cover, and funnel. You get 1 point for any others you list. There is a maximum of 2 points. You can only get the second point if you have the entire first set. b.

∗

Weigh a sample of the solid (into a beaker). Heat the crucible and lid with the Meker burner repeatedly until constant weight is achieved. ∗ Weigh the crucible and lid. Add sufficient deionized water to dissolve the sample. (Warm the solution.) ∗ Slowly add a solution containing the sulfate ion (usually sodium sulfate) to the solution. Allow the precipitate to settle, and check for complete precipitation. ∗ Filter the precipitate and place it in the crucible. Heat the crucible and lid with the sample to constant weight. ∗ Weigh the cooled crucible, lid, and sample. You get 2 points for everything in order. Information in parentheses is optional. The first two items may be in any order. You get 1 point if the order is wrong or if any of the starred items is missing.

c. mass of precipitate (ppt.) = (crucible + lid + sample) − (crucible + lid) ⎛ 1mol BaSO4 ⎞ ⎛ 1mol Ba ⎞ ⎛ 137 . 33g Ba ⎞ mass of barium in sample = (g ppt ) ⎜ ⎟⎜ ⎟ ⎟⎜ ⎝ 233.3 4 g ⎠ ⎝ 1mol BaSO4 ⎠ ⎝ 1mol Ba ⎠

Experimental Í 299

percentage of barium =

(mass of barium in sample ) ×100 % ( mass of original sample )

Give yourself 1 point for each correct equation. The values 137.33 and 233.34 are optional. d. Lead would also precipitate as the sulfate. It would be necessary to remove the lead before the sulfate was added. Give yourself 1 point for this answer. There is a total of 8 points possible. Second Free-Response Question

a. A sample of sodium hydroxide is weighed and dissolved in deionized water to give a solution of the approximate concentration desired. (Alternatively, a concentrated NaOH solution could be diluted.) Samples of dried KHP are weighed into flasks and dissolved in deionized water. A few drops of the appropriate acid-base indicator (phenolphthalein) are added to each sample. A buret is rinsed with a little of the NaOH solution; then the buret is filled with NaOH solution. An initial buret reading is taken. NaOH solution is titrated into the KHP samples until the first permanent pink color. A final buret reading is taken. Using the molar mass of KHP, determine the moles of KHP present. This is equal to the moles of NaOH. The difference in the buret readings is the volume of NaOH solution added (convert this to liters). The molarity of the NaOH solution is the moles NaOH divided by the liters of NaOH solution added. (Repeat the procedure for each sample.) Give yourself 2 points for this entire list, if the items are in order. If three or more items are in the wrong order or missing, you get only 1 point. You get 0 points for three or fewer items. b.

7

pH

pH > 1 Volume Added Equivalence point at pH < 7

You get 1 point for this graph. You get an additional point for noting that the equivalence point is greater than 7.

300 U Step 4. Review the Knowledge You Need to Score High c.

You get 1 point for this graph. You must show two regions. d. There are several related ways to do this problem. One method is to split the sample into two portions. Titrate one portion to the equivalence point. Add the titrated sample to the untitrated sample, and add a volume of deionized water equal to the volume of NaOH solution added. The pH of this mixture is equal to the pK a of the acid (this corresponds to a half-titrated sample). You get 1 point for anything concerning a half-titrated sample and an additional point for pH = pKa. e. The pH at the equivalence point must be close to the pKa of the indicator. You get 1 point for this answer. There are 8 points possible.

U Rapid Review Reviewing the experiments should include looking at the synopsis, apparatus, calculations and comments as well as the appropriate concept chapters, if needed. •

Pay particular attention to any experiment you did not perform.

•

Be familar with the equipment used in each experiment.

•

Know the basic measurements required in each experiment.

•

Know what values are measured and which are calculated.

•

Pay attention to significant figures.

•

Balances are used to measure the mass of a substance, not the moles.

STEP

5

Build Your Test-Taking Confidence AP Chemistry Practice Exam 1 AP Chemistry Practice Exam 2


AP Chemistry Practice Exam 1 Í 303

AP Chemistry Practice Exam 1—Multiple Choice ANSWER SHEET

1 2 3 4 5

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

6 7 8 9 10

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

11 12 13 14 15

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

16 17 18 19 20

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

21 22 23 24 25

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

26 27 28 29 30

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

31 32 33 34 35

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

36 37 38 39 40

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

41 42 43 44 45

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

46 47 48 49 50

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

51 52 53 54 55

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

56 57 58 59 60

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

61 62 63 64 65

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

66 67 68 69 70

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

71 72 73 74 75

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E



The AP exam is a timed exam; keep this in mind as you prepare. When taking the various tests presented in this book, you should follow the AP exam rules as closely as possible. Anyone can improve his or her score by using notes, books, or an unlimited time. You will have none of these on the AP exam, so resist the temptation to use them on practice exams. Carefully time yourself; do not use other materials; and use a calculator only when expressly allowed to do so. After you have finished an exam, you may use other sources to go over questions you missed or skipped. We have seen many students get into trouble because the first time they attempted a test under “test conditions” was on the test itself.

AP Chemistry Practice Exam 1—Multiple Choice Section 1 Time—1 hour and 30 minutes NO CALCULATOR MAY BE USED WITH SECTION 1 Answer the following questions in the time allowed. You may use the periodic table in the back of the book. 1. Choose the strongest Lewis base from the following. +

(A) Na (B) Fe3+ (C) NH3 (D) Zn2+ (E) BF3 2. Which of the following CANNOT behave as both a Brønsted base and a Brønsted acid? 2– HPO2–4

(A) (B) C2O4 – (C) HSO4 – (D) HC2O–4 (E) HCO3 3. A species, molecule, or ion, is called a Lewis base if it does which of the following? (A) It is an electron-pair donor. + (B) It donates an H . + (C) It accepts an H . (D) It is an electron-pair acceptor. + (E) It increases the H (aq) in water.

4. Which of following are proper laboratory procedures for a titration? I. Make sure the color change of the indicator persists for at least 30 s. II. Allow all materials to cool to room temperature before they are weighed. III. Rinse the buret with deionized water before it is filled with titrant for the first titration. (A) I and III only (B) I, II, and III (C) II only (D) II and III only (E) I and II only 5. In most of its compounds, this element exists as a monatomic cation. (A) F (B) S (C) N (D) Ca (E) Cl 6. In which of the following groups are the species listed correctly in order of increasing radius? (A) Sr, Ca, Mg 2– 2– 2– (B) Se , S , O (C) Mn3+, Mn2+, Mn (D) I–, Br–, Cl– (E) K, Ca, Sc GO ON TO THE NEXT PAGE

306 U STEP 5. Build Your Test-Taking Confidence 7. Which of the following elements has the lowest electronegativity? (A) F (B) I (C) C (D) K (E) Al 8. Which of the following represents the correct formula for hexamminechromium(III) chloride? (A) [Cr(NH3)6](ClO3)3 (B) (NH3)6Cr3Cl (C) Am6CrCl3 (D) [Cr(NH3)6]Cl3 (E) [Cr3(NH3)6]Cl3 9. ____Fe(OH)3(s) +____H2SeO4(aq) → ____Fe2 (SeO4)3(s) +____H2O(1) After the above chemical equation is balanced, the lowest whole-number coefficient for water is (A) 1 (B) 6 (C) 9 (D) 12 (E) 3 10. Which of the following best represents the net ionic equation for the reaction of barium hydroxide with an aqueous potassium sulfate solution? (A) Ba(OH)2 + KSO4 → BaSO4 + KOH 2+ → BaSO4 + 2 K+ (B) Ba + K2SO 2– 4 2+ (C) Ba + SO4 → 2– BaSO4 (D) Ba(OH)2 + SO4 → BaSO4 + 2 OH– (E) Ba(OH)2 + K2SO4 → BaSO4 + 2 KOH 11. A sample of magnesium metal is heated in the presence of nitrogen gas. After the sample was heated, some water was added to it. Which of the following statements is false? (A) The magnesium reacted with the nitrogen to produce magnesium nitride. (B) No reaction occurred because nitrogen gas is so unreactive. (C) The solid did not dissolve in the water. (D) After the addition of the water, the distinctive odor of ammonia gas was present. (E) The water converted some of the magnesium nitride to magnesium hydroxide.

12. A student mixes 50.0 mL of 0.10 M Ni(NO3)2 solution with 50.0 mL of 0.10 M NaOH. A green precipitate forms, and the concentration of the hydroxide ion becomes very small. Which of the following correctly places the concentrations of the remaining ions in order of decreasing concentration? + 2+ (A) [Na ] > [Ni ]– > [NO3 ] 2+ + (B) [Ni ] > |NO–3 ] > [Na ] + 2+ (C) [Na ]– > [NO3 ] > [Ni ] + 2+ (D) [NO3 ] > [Na ] > [Ni ] – 2+ + (E) [Ni ] > [Na ] > [NO3 ] –

13. The addition of concentrated Ba(OH)2(aq) to a 1.0 M (NH4)2SO4 solution will result in which of the following observations? (A) The odor of ammonia is detected, and a white precipitate forms. (B) The formation of a white precipitate takes place. (C) The solution becomes acidic. (D) The odor of ammonia is detected. (E) An odorless gas forms and bubbles out of the mixture. 14. Manganese, Mn, forms a number of oxides. A particular oxide is 69.6% Mn. What is the simplest formula for this oxide? (A) MnO (B) Mn2O3 (C) Mn3O4 (D) MnO2 (E) Mn2O7 15. Sodium sulfate forms a number of hydrates. A sample of a hydrate is heated until all the water is removed. What is the formula of the original hydrate if it loses 56% of its mass when heated? (A) Na2SO4.H2O (B) Na2SO4.2H2O (C) Na2SO4.6H2O (D) Na2SO4.8H2O (E) Na2SO4.10H2O

GO ON TO THE NEXT PAGE


16. 3Cu(s) + 8 HNO3(aq)→ 3 Cu(NO3)2(aq) + 2 NO(g) + 4 H2O(l) Copper metal reacts with nitric acid according to the above equation. A 0.30-mol sample of copper metal and 100.0 mL of 3.0 M nitric acid are mixed in a flask. How many moles of NO gas will form? (A) 0.20 mol (B) 0.038 mol (C) 0.10 mol (D) 0.075 mol (E) 0.30 mol 17. Gold(III) oxide, Au2O3, can be decomposed to gold metal, Au, plus oxygen gas, O2. How many moles of oxygen gas will form when 2.21 g of solid gold(III) oxide is decomposed? The formula mass of gold(III) oxide is 442. (A) 0.00750 mol (B) 0.0150 mol (C) 0.00500 mol (D) 0.00250 mol (E) 0.0100 mol 18. ____C4H11N(l) +____O2(g) → ____CO2(g) + ____H2O(l) +____N2(g) When the above equation is balanced, the lowest whole number coefficient for CO2 is: (A) 4 (B) 16 (C) 27 (D) 22 (E) 2 19. 2 KMnO4 + 5 H2C2O4 + 3 H2SO4 → K2SO4 + 2 MnSO4 + 10 CO2 + 8 H2O How many moles of MnSO4 are produced when 2.0 mol of KMnO4, 5.0 mol of H2C2O4, and 1.5 mol of H2SO4 are mixed? (A) 2.0 mol (B) 1.5 mol (C) 1.0 mol (D) 3.0 mol (E) 2.5 mol

20. ____KClO3 →____KCl +____O2 After the above equation is balanced, how many moles of O2 can be produced from 1.0 mol of KClO3? (A) 1.5 mol (B) 3.0 mol (C) 1.0 mol (D) 3.0 mol (E) 6.0 mol 21. Sr + 2 H2O → Sr(OH)2 + H2 Strontium reacts with water according to the above reaction. What volume of hydrogen gas, at standard temperature and pressure, is produced from 0.100 mol of strontium? (A) 3.36 L (B) 5.60 L (C) 2.24 L (D) 4.48 L (E) 1.12 L 22. A sample of nitrogen gas is placed in a container with constant volume. The temperature is changed until the pressure doubles. Which of the following also changes? (A) density (B) moles (C) average velocity (D) number of molecules (E) potential energy 23. An experiment to determine the molecular mass of a gas begins by heating a solid to produce a gaseous product. The gas passes through a tube and displaces water in an inverted, water-filled bottle. The mass of the solid is measured, as is the volume and the temperature of the displaced water. Once the barometric pressure has been recorded, what other information is needed to finish the experiment? (A) the heat of formation of the gas (B) the density of the water (C) the mass of the displaced water (D) the vapor pressure of the water (E) the temperature to which the solid was heated


308 U STEP 5. Build Your Test-Taking Confidence 24. Determine the final temperature of a sample of hydrogen gas. The sample initially occupied a volume of 6.00 L at 127°C and 875 mm Hg. The sample was heated, at constant pressure, until it occupied a volume of 15.00 L. (A) 318°C (B) 727°C (C) 45°C (D) 160°C (E) 1000°C 25. From the following, choose the gas that probably shows the least deviation from ideal gas behavior. (A) Kr (B) CH4 (C) O2 (D) H2 (E) NH3

30. When lithium sulfate, Li2SO4, is dissolved in water, the temperature increases. Which of the following conclusions may be related to this? (A) Lithium sulfate is less soluble in hot water. (B) The hydration energies of lithium ions and sulfate ions are very low. (C) The heat of solution for lithium sulfate is endothermic. (D) The solution is not an ideal solution. (E) The lattice energy of lithium sulfate is very low. 31. What is the energy required to form a gaseous cation from a gaseous atom? (A) ionization energy (B) kinetic energy (C) activation energy (D) lattice energy (E) free energy

Choose from the following types of energy for questions 26–28. (A) free energy (B) lattice energy (C) kinetic energy (D) activation energy (E) ionization energy 26. The maximum energy available for useful work from a spontaneous reaction 27. The energy needed to separate the ions in an ionic solid 28. The energy difference between the transition state and the reactants 1. 2 ClF(g) + O2(g) → Cl2O(g) + OF2(g) ΔH° = 167.5 kJ 2. 2 F2(g) + O2(g) → 2 OF2(g) ΔH° = –43.5 kJ 3. 2 ClF3(l) + 2 O2(g) → Cl2O(g) + 3 OF2(g) ΔH° = 394.1 kJ 29. Using the information given above, calculate the enthalpy change for the following reaction: ClF(g) + F2(g) → ClF3(l) (A) –135.1 kJ (B) +135.1 kJ (C) 270.2 kJ (D) –270.2 kJ (E) 0.0 kJ

32. C2H4(g) + H2O(g) → C2H5OH(g)

ΔH = –46 kJ

Determine ΔH for the above reaction if C2H5OH(l) was formed in the above reaction instead of C2H5OH(g). The ΔH of vaporization for C2H5OH is 43 kJ/mol. (A) +3 kJ (B) +89 kJ (C) −3 kJ (D) +43 kJ (E) −89 kJ 2+ 33. The ground-state configuration of Ni is which of the following? 2 2 6 2 6 8 2 (A) 1s 2s 2p 3s 3p 3d 4s 2 2 6 2 6 (B) 1s 2s 2p 3s 3p 3dl04s2 (C) ls22s22p63s23p63d10 (D) ls22s22p63s23p63d8 (E) ls22s22p63s23p63d54s2

34. A ground-state electron in a calcium atom might have which of the following sets of quantum numbers? (A) n = 3; l = 2; m1 = 0; ms = −1/2 (B) n = 5; l = 0; m1 = 0; ms = −1/2 (C) n = 4; l = 1; m1 = 0; ms = −1/2 (D) n = 4; l = 0; m1 = 0; ms = −1/2 (E) n = 4; l = 0; m1 = + 1; ms = −1/2 GO ON TO THE NEXT PAGE


The following answers are to be used for questions 35–38. (A) Pauli exclusion principle (B) electron shielding (C) the wave properties of matter (D) Heisenberg uncertainty principle (E) Hund’s rule 35. The diffraction of electrons 36. The maximum number of electrons in an atomic orbital is two. 37. An oxygen atom is paramagnetic in the ground state. 38. The position and momentum of an electron cannot be determined exactly. 39. Magnesium reacts with element X to form an ionic compound. If the ground-state electron 2 2 5 configuration of X is ls 2s 2p , what is the simplest formula for this compound? (A) Mg2X3 (B) MgX2 (C) MgX4 (D) Mg2X5 (E) MgX 40. VSEPR predicts that a BF3 molecule will be which of the following shapes? (A) tetrahedral (B) trigonal bipyramidal (C) square pyramid (D) trigonal planar (E) square planar 41. Which of the following is polar? (A) BF3 (B) IF5 (C) CF4 (D) XeF4 (E) AsF5 42. The only substance listed below that contains ionic, σ, and π bonds is: (A) C2H4 (B) NaH (C) NH4Cl (D) NaC2H3O2 (E) H2O

43. Which molecule or ion in the following list has the greatest number of unshared electron pairs around the central atom? (A) IF7 – (B) NO3 (C) BF3 (D) NH3 (E) CBr4 44. Which of the following processes does not involve breaking an ionic or a covalent bond? (A) 2 NO(g) + O2 → 2 NO2(g) – + (B) NaNO3(s) → Na (aq) + NO3 (aq) (C) Zn(s) → Zn(g) (D) 2 H2(g) + O2(g) → 2 H2O(g) (E) 2 KClO3(s) → 2 KCl(s) + 3 O2(g) Choose from the following solids for questions 45–48. (A) composed of atoms held together by delocalized electrons (B) composed of molecules held together by intermolecular dipole–dipole interactions (C) composed of positive and negative ions held together by electrostatic attractions (D) composed of macromolecules held together by strong bonds (E) composed of molecules held together by intermolecular London forces 45. Graphite 46. Ca(s) 47. CaCO3(s) 48. SO2(s) 49. The critical point represents (A) the highest temperature and pressure where the substance may exist as discrete solid and gas phases. (B) the highest temperature and pressure where the substance may exist as discrete liquid and gas phases. (C) the temperature and pressure where the substance exists in equilibrium as solid, liquid, and gas phases. (D) the highest temperature and pressure where the substance may exist as discrete liquid and solid phases. (E) the highest temperature and pressure where a substance can sublime. GO ON TO THE NEXT PAGE

310 U STEP 5. Build Your Test-Taking Confidence 50. A sample of a pure liquid is placed in an open container and heated to the boiling point. Which of the following may increase the boiling point of the liquid? I. The container is sealed. II. The size of the container is increased. III. More liquid is added. (A) (B) (C) (D) (E)

54. If a solution of ethyl ether, (C2H5)2O, in ethanol, C2H5OH, is treated as an ideal solution, what is the mole fraction of ethyl ether in the vapor over an equimolar solution of these two liquids? The vapor pressure of ethyl ether is 480 mm Hg at 20°C, and the vapor pressure of ethanol is 50 mm Hg at this temperature. (A) 0.50 (B) 0.76 (C) 0.91 (D) 0.27 (E) 0.09

II and III I and III III only II only I only

51. Which point on the diagram below might represent the normal boiling point?

E C

55. How many milliliters of concentrated ammonia (7.0-molar NH3) are needed to prepare 0.250 L of 3.0-molar NH3? (A) 110 mL (B) 0.11 mL (C) 200 mL (D) 150 mL (E) 75 mL

Pressure

56. The plot of ln[A] versus time gives a straight line. This implies the rate law is A B D Temperature

52. What is the total concentration of cations in a solution made by combining 700.0 mL, of 3.0 M (NH4)3PO4 with 300.0 mL of 2.0 M Na2SO4? (A) 2.7 M (B) 13 M (C) 7.5 M (D) 5.0 M (E) 2.5 M 53. A stock solution that is 0.30 M in Na2SO4 is available. How many moles of solid Na3PO4 must be added to 800 mL of this solution to increase the sodium ion concentration to 0.90 M? (A) 0.060 (B) 0.12 (C) 0.080 (D) 0.16 (E) 0.24

2

(A) rate = k[A] (B) rate = k[A]–2 (C) rate = k[A]0 (D) rate = k[A]–1 (E) rate = k[A] 57. The specific rate constant, k, for radioactive –1 lawrencium-256 is 86 h What mass of a 0.0500 ng sample of lawrencium-256 remains after 58 s? (A) 0.0500 ng (B) 0.0250 ng (C) 0.0125 ng (D) 0.00625 ng (E) 0.0375 ng 58. The purpose of using a lit match to start the fire in a gas grill is (A) to supply the free energy for the reaction (B) to catalyze the reaction (C) to supply the heat of reaction (D) to supply the kinetic energy for the reaction (E) to supply the activation energy for the reaction



59. Acid

Ka, acid dissociation constant 7.2 × 10−3 6.3 × 10−8 4.2 × 10−13

H3PO4− H2PO2−4 HPO4

Using the above information, choose the best answer for preparing a pH = 7.9 buffer. (A) K2HPO4 (B) K3PO4 (C) K2HPO4 + KH2PO4 (D) K2HPO4 + K3PO4 (E) H3PO4 + KH2PO4 60. What is the ionization constant, Ka, for a weak monoprotic acid if a 0.6-molar solution has a pH of 2.0? –4

(A) 1.7 × 10 (B) 1.7 × 10–2 (C) 6 × 10–6 (D) 2.7 × 10–3 (E) 3.7 × l0–4 Questions 61–64 refer to the following aqueous solutions. All concentrations are 1 M. (A) CH3NH2 (methylamine) and LiOH (lithium hydroxide) (B) C2H5NH2 (ethylamine) and C2H5NH3NO3 (ethylammonium nitrate) (C) CH3NH2 (methylamine) and HC3H5O2 (propionic acid) (D) KClO4 (potassium perchlorate) and HClO4 (perchloric acid) (E) H2C2O4 (oxalic acid) and KHC2O4 (potassium hydrogen oxalate) 61. The most basic solution (highest pH) 62. The solution with a pH nearest 7 63. A buffer with a pH > 7 64. A buffer with a pH < 7

65. At constant temperature, a change in volume will NOT affect the moles of the substances present in which of the following? −

(A) 6 CN − (aq ) + Fe 3+ (aq ) → [Fe(CN)6 ]3 (aq ) (B) CO(g) + Cl 2 ( g ) → COCl 2 (g ) (C) PCl 3 ( g ) + Cl 2 ( g ) → PCl 5 ( g ) (D) CO(g) + H 2O(g) → CO2 ( g ) + H 2 ( g ) (E) 2NH3 ( g ) → N 2 (g ) + 3H 2 ( g ) 66. HCO3− ( aq ) + H 2O(e ) H3O+ (aq ) + CO32− (aq ) Which species, in the above equilibrium, behave as bases? 2–

I. CO3 II. H2O – III. HCO3 (A) (B) (C) (D) (E)

I and III II only I and II I only II and III

67. CO(g) + 2H 2 ( g ) → CH3OH(g) A 1.00-L flask is filled with 0.70 mol of H2 and 0.60 mol of CO, and allowed to come to equilibrium. At equilibrium, there are 0.40 mol of CO in the flask. What is the value of Kc , the equilibrium constant, for the reaction? (A) 0.74 (B) 3.2 (C) 0.0050 (D) 5.6 (E) 1.2 −

2−

68. H2O(l) + CrO4 (aq) + HSnO2 (aq) → –

−

– CrO2 (aq) + OH (aq) + HSnO3 (aq) – What is the coefficient of OH when the above reaction is balanced?

(A) 10 (B) 2 (C) 5 (D) 4 (E) 1


312 U STEP 5. Build Your Test-Taking Confidence 2–

2–

69. 2 Bi3+ + 3 SnO2 + 6 OH– → 3 SnO3 + 3 H2O + 2 Bi For the above reaction, pick the true statement from the following: (A) The oxidation number of tin changes from + 2 to + 4. (B) The oxidation number of tin changes from + 4 to + 2. 3+ (C) The Bi is oxidized by the tin. – 3+ (D) The OH 2–reduces the Bi . (E) The 2SnO 3 is formed by the reduction of – SnO2 . 70. An electrolysis cell was constructed with two platinum electrodes in a 1.00 M aqueous solution of KCl. An odorless gas evolved from one electrode and a gas with a distinctive odor evolved from the other electrode. Choose the correct statement from the following list. (A) The odorless gas was oxygen. (B) The odorless gas was evolved at the anode. (C) The gas with the distinctive odor was evolved at the anode. (D) The odorless gas was evolved at the positive electrode. (E) The gas with the distinctive odor was evolved at the negative electrode. 226

71. When 88 Ra decays, it emits 2 α particles, then a β particle, followed by an α particle. The resulting nucleus is: (A)

212 83

Bi

(B)

222 86

Rn

(C)

214 82

Pb

(D)

214 83

Bi

(E)

212 85

At

72. Which of the following lists the types of radiation in the correct order of increasing penetrating power? (A) α, γ, β (B) β, α, γ (C) α, β, γ (D) β, γ, α (E) γ, β, α 73. Which of the following statements are correct concerning β particles? I. They have a mass number of zero and a charge of –1. II. They are electrons. III. They are less penetrating than α particles. (A) (B) (C) (D) (E)

I and II I and III II and III I only II only 3

74. If 75% of a sample of pure 1 H decays in 24.6 yr, what is the half-life of 13 H ? (A) 24.6 yr (B) 18.4 yr (C) 12.3 yr (D) 6.15 yr (E) 3.07 yr 75. Alkenes are hydrocarbons with the general formula CnH2n. If a 0.420 g sample of any alkene is combusted in excess oxygen, how many moles of water will form? (A) 0.0600 (B) 0.450 (C) 0.015 (D) 0.300 (E) 0.0300

STOP. End of AP Chemistry Practice Exam 1—Multiple Choice


AP Chemistry Practice Exam 1—Free Response Time—1 hour and 35 minutes Answer the following questions in the time allowed. You may use the tables at the back of the book. Write the answers on a separate sheet of paper.

Part A. Time — 55 minutes You may use a calculator for part A. Question 1. Compound

Ksp

Cr(OH)2 Cr(OH)3 Fe(OH)2 Pb(OH)2 Mg(OH)2 Mn(OH)2 Sn(OH)2

1.0 × 10–17 6.3 × 10–31 7.9 × 10–16 1.1 × l0–20 6.0 × 10–10 1.9 × 10–13 6.3 × 10–27

Use the Ksp data given above to answer the following questions. (a) Excess manganese(II) hydroxide, Mn(OH)2, is added to 100.0 mL of deionized water. What is the pH of the solution? 2+ 2+ (b) A solution that is 0.10 M in Mg and 0.10 M in Fe is slowly made basic. What is the concentra2+ 2+ tion of Fe when Mg begins to precipitate? (c) Two beakers are filled with water. Excess chromium(III) hydroxide is added to one and excess tin(II) hydroxide is added to the other. Which beaker has the higher concentration of metal ions? Calculate the concentration of metal ion in each beaker to support your prediction. (d) Chromium(III) hydroxide, Cr(OH)3, is less soluble than chromium(II) hydroxide, Cr(OH)2. Explain. (e) Calculate the grams of lead(II) hydroxide, Pb(OH)2, that will dissolve in 1.00 L of water. Question 2. 2 PCl3(g) + O2(g) → 2 POCl3(g) Thermodynamic values related to the above reaction are given in the table below. SUBSTANCE

PCl3(g) O2(g) POCl3(g) (a) (b) (c) (d) (e)

Δ H f° (kJ/mol)

–287 0 –542.2

S° (J/mol K)

BONDS

BOND ENERGIES (kJ/mol)

312

P–Cl

331

205.0

O=O

498

325

O–O

204

Determine the enthalpy change for the above reaction. Estimate the PO bond energy. Is the PO bond a single or a double bond? Justify your answer. Calculate the entropy change for the reaction. Is this reaction spontaneous or nonspontaneous at 25°C? Justify your prediction. GO ON TO THE NEXT PAGE

314 U STEP 5. Build Your Test-Taking Confidence Question 3. The following materials are made available for the determination of the molar mass of an unknown nonvolatile solid. analytical balance test tube

thermometer stopwatch

beaker hot plate

support stand and clamp

Phenol (melting point = 43°C and Kf = 7.40°C/m) is available as the solvent. The unknown behaves as a nonelectrolyte in phenol. (a)

Plot a cooling curve for phenol on the axes below, and plot the cooling curve for a solution of the unknown in phenol.

Pure Phenol:

Solution:

43°C

43°C

Time

(b) (c) (d)

Time

What information must be obtained from the two graphs in order to calculate the molar mass? What additional information is needed to determine the molar mass of the unknown solid? Show how the above information may be used to calculate the molar mass of the unknown solid.

STOP


Part B. Time — 40 minutes You may not use a calculator for part B. Question 4. Answer all three of the following questions. Each question will have two parts—writing the balanced chemical equation and answering a question about the reaction. Coefficients in the balanced chemical equation must be in the lowest whole-number ratio. Do not include formulas for substances that remain unchanged during the reaction. Unless otherwise noted, assume all the reactions occur in aqueous solution. If a substance is extensively ionized and therefore is present as ions in solution, write its formula as ions. Example: Hydrochloric acid is added to a lead(II) nitrate solution. 2+ – Pb + 2 Cl ã PbCl2

(a) Excess potassium cyanide is added to an iron(III) nitrate solution. Which species behaves as a Lewis base in the reaction? Explain. (b) Chlorine gas is bubbled through a solution of calcium iodide. Identify the oxidizing and reducing agents in this reaction. (c) An iron(III) nitrate solution is made basic with potassium hydroxide solution. Identify the spectator ions, if any, in this reaction. Question 5 A sample of a solid, weak monoprotic acid, HA, is supplied along with standard sodium hydroxide solution. The sodium hydroxide solution was standardized with potassium hydrogen phthalate (KHP). (a) (b) (c) (d) (e)

List the apparatus required to titrate an HA solution. Sketch a pH versus volume of base added curve for the titration. Sketch the titration curve if the unknown acid was really a diprotic acid. Describe the steps required to determine the molar mass of HA. How would the molar mass of HA be changed if the KHP contained an inert impurity?

Question 6 Relate each of the following to atomic properties and the principles of bonding. (a) The ionization energy of nitrogen atoms is higher than expected. (b) Draw the Lewis electron-dot structures for CO2 and CO. Explain the polarity of these compounds. (c) The compound C2H3F is polar, but compounds with the general formula C2H2F2 are sometimes polar and sometimes nonpolar. Show the structures and explain. (d) There are two isomers with the formula C2H6O. One of the isomers is more soluble in water than the other. Use the structures of these two compounds to explain the difference in solubility. (e) Why does SiF4 react with fluoride ion, and CF4 not react?

STOP. End of AP Chemistry Practice Exam 1

316 U STEP 5. Build Your Test-Taking Confidence

U Answers and Explanations for Exam 1—Multiple Choice 1. C—This is the only one that has a pair of electrons to donate. 2. B—All can behave as Brønsted bases. Only B cannot behave as an acid. 3. A—This is the definition of a Lewis base. 4. E—The buret should be rinsed with titrant, not water. 5. D—The others are normally monatomic anions. 6. C—Increasing sizes indicate decreasing charge, lower position in a column on the periodic table, or position to the left in a period on the periodic table. 7. D—The element furthest away from F.

19. C—Sulfuric acid is the limiting reagent. 20. A—(1.0 mol KClO3)(3 mol O2/2 mol KClO3) = 1.5 mol 21. C—(0.100 mol Sr)(l mol H2/l mol Sr) (22.4 L/mol) = 2.24 L H2 22. C—The average velocity is related to temperature. 23. D—Water, whenever present, will contribute its vapor pressure. 24. B—T2 = (V2T1)/V1 = [(15.00 L × 400. K)/(6.00 L)] – 273 = 727°C 25. D—Small and nonpolar 26. A—Definition

8. D—Hexammine = (NH3)6; chromium(III) = 3+ – Cr ; chloride = Cl

27. B—Definition

9. B—2 Fe(OH)3(s) + 3 H2SeO4(aq) → Fe2(SeO4)3(s) + 6 H2O(l)

29. A—1⁄2[2 ClF(g) + O2(g) → Cl2O(g) + OF2(g)] 1 ⁄2(167.5 kJ) 1 1 ⁄2[2 F2(g) + O2(g) → 2 OF2(g)] ⁄2(–43.5 kJ) 1 ⁄2[Cl2O(g) + 3 OF2(g) → 2 ClF3(l) + 2 O2(g)] –1⁄2(394.1 kJ)

10. C—The soluble compounds should be separated and the spectator ions eliminated. 11. B—Magnesium nitride does form. 12. D—Some of the nickel remains, the sodium does not change, and two nitrates are formed per nickel(II) nitrate. +

– NH3 + 13. A—The reactions are: NH4 + OH → 2– 2+ H2O and Ba + SO4 → BaSO4

14. B—Percentages: (A) 77.8; (B) 69.6; (C) 72.0; (D) 63.2; (E) 49.5 Approximate the atomic weights to simplify the calculations. 15. E—Percentage of water: (A) 11; (B) 20; (C) 43; (D) 50; (E) 56 16. D—Nitric acid is the limiting reagent. 17. A—(2.21 g)(1 mol/442 g)(3 mol O2/2 mol) = ⎛ 2.2 ⎞ -3 7.50 × 10 mol. Simplify to ⎜ ⎟ (1.5) . ⎝ 440 ⎠ 18. B—4 C4H11N(l) + 27 O2(g) → 16 CO2(g) + 22 H2O(l) + 2 N2(g)

28. D—Definition

ClF(g) + F2(g) → C1F3(l)

–135.1 kJ

30. A—Exothermic processes shift toward the starting materials when heated. 31. A—Definition 32. E—Subtract the heat of vaporization from the original value. 2+ 33. D—Ni has 26 electrons. The first electrons to leave are the 4s electrons.

34. D—This describes one of the 4s electrons. 35. C—Diffraction is a wave phenomenon. 36. A—Definition 37. E—Electrons fill the orbitals individually before pairing. Unpaired ↑ electrons = paramagnetic. 38. D—Definition 39. B—X is F and forms a – 1 ion. Magnesium forms a +2 ion.


40. D—BF3 has three electron pairs around the B.

58. E—Energy is required to initiate the reaction.

41. B—Using VSEPR, all the others are nonpolar.

– 59. C—The pKa for H2PO4 is nearest to the pH value needed. Thus, the simplest buffer would involve this ion. The phosphoric acid in E would lower the pH too much.

42. D—Ionic bonding needs a metal and a nonmetal (usually). Only the acetate ion has resonating bonds (σ and π). 43. D—All the others have no unshared electron pairs. 44. C—Sublimation usually does not involve bond breaking. In any case, Zn is a metal, and it has no ionic or covalent bonds to break.

+ – + – –2 60. A—Ka = [H ][A ]/|HA]; [H ] = [A ] = 1.0 × 10 [HA] = 0.6

61. A—LiOH is a strong base. 62. C—A solution of a weak acid and a weak base would be nearly neutral.

45. D—Both diamond and graphite are covalent network solids.

63. B—Only B and E are buffers. B is basic, and E is acidic.

46. A—This is a description of metallic bonding.

64. E—Only B and E are buffers. B is basic, and E is acidic.

47. C—This is a description of ionic bonding. 48. B—SO2 consists of polar molecules. 49. B—Definition 50. E—This will increase the pressure and, therefore, the boiling point. 51. A—This is the only point on the liquid–gas transition line, other than the critical point. 52. C—[(0.7000 L)(3.0 mol/L)(3 cations/mol) + (0.3000 L)(2.0 mol) (2 cations/mol)]/1.000L + 53. C—(0.800 L)(0.90 mol Na /L)-(0.800 L) + + (0.30 mol/L)(2 Na /mol) = 0.24 mol Na needed + + (0.24 mol Na )(l mol Na3PO4/3 mol Na ) = 0.080 mol Na3PO4

54. C—Equimolar gives a mole fraction of 0.5. 0.5 × 480 mm Hg + 0.5 × 50 mm Hg = 265 mm Hg (total vapor pressure) mole fraction ethyl ether = (0.5 × 480 mm Hg)/265 mm Hg 55. A—Vcon = M dil Vdil /Mcon = (3.0 M × 250 mL)/ 7.0 M 56. E—This plot gives a straight-line only for a firstorder reaction. –1

57. C—tl/2 = (0.693/86 h )(3600 s/h) = 29 s. To save time on the exam you can approximate this equation as t1/2 = (0.7/90)(3600). Dividing 3600 by 90 gives 40; 40 times 0.7=28. The time is equivalent to two half-lives, so one-fourth of the sample should remain.

65. D—If there are equal numbers of moles of gas on each side of the equilibrium arrow, then volume or pressure changes will not affect the equilibrium. + – 66. C—HCO3 and H3O behave as acids.

67. D—The loss of 0.20 mol of CO means that 0.40 mol of H2 reacted (leaving 0.30 mol) and 0.20 mol of CH3,OH formed. Dividing all the moles by the volume gives the molarity, and: 2 Kc = (0.20)/(0.40)(0.30) = 5.6 2–

– 68. B.—H2O(l) + 2 CrO4 (aq) + 3 HSnO2 (aq) – – – → 2 CrO2 (aq) + 2 OH (aq) + 3 HSnO3 (aq)

69. A—Assigning oxidation numbers and definitions is required. 70. C—Hydrogen (odorless) evolves at the cathode (negative), and chlorine (distinctive odor) evolves at the anode (positive). 71. D—The mass should be 226 – (4 + 4 + 0 + 4) = 214. The atomic number should be 88 – (2 + 2 – 1 + 2) = 83. 72. C—Alpha particles are the least penetrating, and gamma rays are the most penetrating. 73. A—In nuclear reactions, the mass of a β particle is treated as 0 and the charge is –1. Electrons and β particles are the same.

318 U STEP 5. Build Your Test-Taking Confidence 74. C—After one half-life, 50% would remain. After another half-life, this would be reduced by one-half to 25%. The total amount decayed is 75%. Thus, 24.6 years must be two half-lives of 12.3 years each.

75. E—One mole of alkene, CnH2n, will form n moles of water. It is possible to determine the value of n by dividing the mass of the alkene by the empirical formula mass.

Count the answers you got correct. Then count the answers you got wrong (skip those you did not answer). Multiply the number of wrong answers by 0.25 and subtract this value from the number of correct answers. This gives you your score on this set of questions.


U Answers and Explanations for Exam 1—Free Response Question 1. (a)

2+ – The volume of the solution is irrelevant. The equilibrium Mn(OH)2(s) Mn (aq) + 2 OH (aq ) is 2+ – 2 –13 important. The mass-action expression for this equilibrium is: Ksp = [Mn ][OH ] = 1.9 × 10 . 2+ – 2 3 Setting [Mn ] = x and [OH ] = 2x, and inserting into the mass-action expression gives: (x)(2x) = 4x = –13 –5 – –5 1.9 × 10 . Solving for x gives x = 3.6 × 10 , and [OH ] = 2x = 7.2 × 10 . –

You get 1 point for the correct [OH ]. There are two common ways to finish the problem. You do not need to show both. – –5 (i) pOH = –log [OH ] = –log 7.5 × 10 = 4.14 pH = 14.00 – pOH = 14.00 – 4.14 = 9.86 + – –14 –5 –10 (ii) [H ] = Kw/[OH ] = 1.0 × 10 /7.5 × 10 = 1.4 × 10 + –10 pH = –log [H ] = –log 1.4 × 10 = 9.86 – You get 1 point for the correct pH. If you got the wrong [OH ] value, but used it correctly, you still get 1 point. 2+ – (b) The important equilibria are: M(OH)2(s) M (aq) + 2 OH (aq), where M = Mg or Fe. It is necessary to determine the hydroxide ion concentration when the magnesium begins to precipitate. –

2+ 2 –10 Ksp = [Mg ][OH ] = 6.0 × 10

[OH–]2 = Ksp/[Mg2+] = 6.0 × 10–10/0.10 = 6.0 × 10–9 [OH–] = 7.7 × 10–5 Using this value with the iron equilibrium gives: 2+ – 2 –16 Ksp = [Fe ][OH ] = 7.9 × 10

[Fe2+] = Ksp/[OH–]2 = (7.9 × 10–16)/(7.7 × 10–5)2 = 1.3 × 10–7 M – 2+ You get 1 point for the correct [OH ] and 1 point for the correct [Fe ]. Alternately, you get 1 point if you did only part of the procedure correctly. There is a maximum of 2 points for this part.

(c) Using the appropriate mass-action expressions: 2+ – 2 –27 Ksp = [Sn ][OH ] = 6.3 × 10

[Sn2+] = x and [OH–]2 = 2x 2 3 –27 (x)(2x) = 4x = 6.3 × 10

x = 1.2 × 10–9 M = [Sn2+] 3+ – 3 –31 Ksp = [Cr ][OH ] = 6.3 × 10

[Cr3+] = x and [OH–] = 3x 3 4 –31 (x)(3x) = 27x = 6.3 × 10

x = 1.2 × 10–8 M = [Cr3+] The tin(II) hydroxide beaker has the lower metal ion concentration. You get 1 point for the correct beaker. You also get 1 point for each metal ion concentration you got correct. Your answers do not need to match exactly, but they should round to the same value.

320 U STEP 5. Build Your Test-Taking Confidence (d) The higher the charge on the cation, the less soluble a substance is. You get 1 point for this answer. (e)

The mass-action expression is: 2+ – 2 –20 Ksp = [Pb ][OH ] = 1.1 × 10

[Pb2+] = x and [OH–] = 2x 2 3 –20 (x)(2x) = 4x = 1.1 × 10

x = 1.4 × 10–7 M –7 –5 (1.4 × 10 mol/L)(1.00L)(241.2g/mol) = 3.4 × 10 g

You get 1 point for the correct answer (or an answer that rounds to this answer). You get 1 point for the setup. Total your points for the different parts. There is a maximum of 10 points possible. Subtract one point if all answers did not have the correct number of significant figures. Question 2. (a) ΔH °rxn = [2(–542.2)] – [2(–287) + 1(0)] = –510.kJ The setup (products – reactants) is worth 1 point, and the answer is worth 1 point. You do not need to get the exact answer, but your answer should round to this one. (b) The answer from part (a) equals the bonds broken minus the bonds formed. Both phosphorus molecules have three P–Cl bonds, and O2 has an O=O bond. [(2 × 3 × 331) + (498)] – [(2 PO) + (2 × 3 × 331)] = –510 kJ PO = 504 kJ The setup (broken − formed) is worth 1 point, and the answer is worth 1 point. You do not need to get the exact answer, but your answer should round to this one. (c) It is a double bond. The value from part (b) is much higher than the single-bond values from the table. You get 1 point for the correct prediction, and 1 point for the explanation. If you got the wrong answer for part (b), you can still get 1 or 2 points if you used the answer correctly on this part. (d) ΔS°rxn = [2(325)] – [2(312) + 1(205.0)] = –179 J/K The setup (products – reactants) is worth 1 point, and the answer is worth 1 point. You do not need to get the exact answer, but your answer should round to this one. (e) The free-energy change must be calculated. ΔG°rxn = ΔH°rxn – TΔS°rxn = –510.kJ – (298 K)(1 kJ/1000 J)(–179J/K) = –457 kJ The negative value means the reaction is spontaneous. You get 1 point for the prediction that the reaction is spontaneous. The setup (plugging into the equation) is worth 1 point if you remember to change the temperature to kelvin and convert joules to kilojoules. An additional 1 point comes from the answer. If you got the wrong value in either part (a) or (b), but used it correctly, you will still get the point for the answer. The free-energy equation is part of the material supplied in the exam booklet. Subtract one point if all your answers do not have the correct number of significant figures.


Question 3. (a)

43°C

43°C

Time

Time

You get 1 point for the first plot. You get 1 point for the second plot only if the level region is definitely below 43°C. (b) The difference in the temperatures of the two level regions (ΔT ) is needed. You get 1 point for this answer. (c)

The mass (in grams) of the unknown solid and the mass (in kilograms) of the phenol are required. You get 1 point for each of these answers.

(d) The required equation is: ΔT = K f m Calculate the molality of the solution by dividing the change in temperature (ΔT ) by the freezingpoint depression constant (Kf ). Calculate the moles of the unknown by multiplying the molality of the solution by the kilograms of phenol. Calculate the molar mass by dividing the grams of the unknown by the moles of the unknown. You get 1 point for each correct calculation you listed. Total your points. There are 8 possible points. Question 4. −

(a)

6 CN − (aq ) + Fe 3+ (aq ) → [Fe(CN)6 ]3 (aq ) 3+. The cyanide ion is donating a pair of electrons to Fe Thus, the cyanide ion is a Lewis base. You get 1 point for the correct formulas for the reactants and products, and 1 point for the correct coefficients in the balanced equation. Answering the associated question correctly is worth 1 point.

(b)

Cl 2 + 2 I− → 2 Cl − + I2 The reducing agent is the iodide ion and the oxidizing agent is chlorine gas. You get 1 point for the correct formulas for the reactants and products, and 1 point for the correct coefficients in the balanced equation. Answering the associated question correctly is worth 1 point.

(c)

Fe 3+ + 3 OH − → Fe(OH)3 The nitrate and potassium ions are spectator ions in this reaction. You get 1 point for the correct formulas for the reactants and products, and 1 point for the correct coefficients in the balanced equation. Answering the associated question correctly is worth 1 point.

322 U STEP 5. Build Your Test-Taking Confidence Question 5. (a) *analytical balance desiccator pH meter wash bottle

*buret drying oven pipet

clamp *Erlenmeyer flask support stand

You get 1 point if you have ALL the starred items. You get 1 point for the other items. There is a maximum of 2 points. If you have only some of the starred items, your maximum is 1 point. (b)

pH

7

pH > 1

Volume Added Equivalence point at pH > 7

You get 1 point for this graph. You get 1 point for noting that the equivalence point is greater than 7. (c)

You get 1 point for this graph. You must show two regions. (d) 1. Weigh a sample of HA. 2. Titrate HA versus standard NaOH to find the volume of NaOH solution required to neutralize the acid. 3. Multiply the concentration of the NaOH solution times the volume used to get the moles of NaOH. 4. The moles of HA is the same as the moles of NaOH. 5. Divide the mass of HA by the moles of HA. You get 2 points if you list all five steps. If you miss one or more steps you get only 1 point. You get 0 points if you get none of the steps correct. There are no bonus points for more steps or more details. (e) If the KHP contained an inert impurity, the concentration of the NaOH solution would be too low. If the concentration of the NaOH solution were too low, then more solution would be needed for the titration of HA. This would yield a lower number of moles of HA, giving a higher molar mass.


You get 1 point for the NaOH concentration being low. You get 1 point for predicting a higher molar mass. If you incorrectly predicted the NaOH concentration to be too high, you can get 1 point if you predicted a lower molar mass. Total your points. There is a maximum of 9 possible points. Question 6 (a) Nitrogen atoms have a half-filled set of p-orbitals. Half-filled sets of orbitals have an increased stability. You get 1 point for this answer. (b) :O::C::O:

:C:::O:

CO2 is linear and nonpolar. The different electronegativities of C and O make CO polar. You get 1 point for each correct Lewis structure and 1 point if you explain both polarities correctly. There is a maximum of 3 points. You may use a double line between the C and each of the O’s in CO2, and a triple line between the C and O in CO. (c) There is one compound with the formula C2H3F, and there are three compounds with the formula C2H2F2. The structures are: H C H polar

F C

F C

H

F C

H H polar

F C

H C

H F nonpolar

F C

H C

F polar

H

The fluorines are the most electronegative atoms present, and the bonds to them are polar covalent. The only nonpolar compound is the result of the polar C−F bonds pulling equally in opposite directions. You get 1 point for ALL the structures, and 1 point for a correct explanation. There is a maximum of 2 points. (d) The structures are: CH3−O−CH3 and CH3CH2OH. The first compound (dimethyl ether) is polar, but not as soluble in water as the second compound (ethanol) which is capable of hydrogen bonding to water. You get 1 point if you show both structures, and you get 1 point for a correct explanation. The names shown in parentheses are not required. –

2 (e) Silicon tetrafluoride is capable of reacting with the fluoride ion (to produce SiF6 ) because silicon can expand its octet. Carbon tetrafluoride does not react because carbon cannot expand its octet. An alternate explanation would be that silicon has d orbitals available for reacting and carbon does not. You get 1 point for either explanation.

Total your points for the problem. There is a maximum of 9 possible points. TOTAL SCORE: Question 1 _______ Question 2 _______ Question 3 _______ Question 4 _______ Question 5 _______ Question 6 _______



AP Chemistry Practice Exam 2—Multiple Choice ANSWER SHEET

1 2 3 4 5

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

6 7 8 9 10

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

11 12 13 14 15

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

16 17 18 19 20

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

21 22 23 24 25

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

26 27 28 29 30

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

31 32 33 34 35

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

36 37 38 39 40

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

41 42 43 44 45

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

46 47 48 49 50

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

51 52 53 54 55

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

56 57 58 59 60

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

61 62 63 64 65

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

66 67 68 69 70

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

71 72 73 74 75

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E



The AP exam is a timed exam; keep this in mind as you prepare. When taking the various tests presented in this book, you should follow the AP exam rules as closely as possible. Anyone can improve his or her score by using notes, books, or an unlimited time. You will have none of these on the AP exam, so resist the temptation to use them on practice exams. Carefully time yourself; do not use other materials; and use a calculator only when expressly allowed to do so. After you have finished an exam, you may use other sources to go over questions you missed or skipped. We have seen many students get into trouble because the first time they attempted a test under “test conditions” was on the test itself.

AP Chemistry Practice Exam 2—Multiple Choice Time—1 hour and 30 minutes Answer the following questions in the time allowed. You may use the periodic table at the back of the book. 1. Choose the strongest Lewis acid from the following. 2–

(A) SO4 (B) Fe3+ (C) Cl– (D) Na+ – (E) NO3

2. Chlorine forms a number of oxyacids. Which of the following is the correct order of increasing acid strength? (A) HClO3 < HClO4 < HClO < HClO2 (B) HClO4 < HClO3 < HClO2 < HClO (C) HClO < HClO2 < HClO3 < HClO4 (D) HClO4 < HClO3 = HClO2 < HClO (E) HClO4 = HClO3 < HClO2 < HClO 3. Oxidation of which of the following substances will yield a stronger acid? (A) H2CO3 (B) HNO3 (C) HIO (D) HIO4 (E) H2SO4

4. A student prepared five vinegar samples by pipetting 10.00-mL samples of vinegar into five separate beakers. Each of the samples was diluted with deionized water, and phenolphthalein was added as an indicator. The samples were then titrated with standard sodium hydroxide until the appearance of a permanent pink color indicated the end point of the titration. The following volumes were obtained. Volumes of standard NaOH Sample 1: Sample 2: Sample 3: Sample 4: Sample 5:

43.28 mL 43.27 mL 50.00 mL no color change 43.26 mL 43.24 mL

Which of the following is the most likely cause for the variation in the results? (A) Too much deionized water was added to the third sample. (B) The student forgot to add phenolphthalein to the third sample. (C) More acetic acid was present in the third vinegar sample. (D) The student did not properly rinse the buret with sodium hydroxide solution. (E) Too much indicator was in the third sample.


328 U STEP 5. Build Your Test-Taking Confidence 5. Choose the group that does not contain isotopes of the same element.

A. Atom I Atom II B. Atom I Atom II C. Atom I Atom II D. Atom I Atom II E. Atom I Atom II

NUMBER OF PROTONS

NUMBER OF NEUTRONS

17

18

18

19

25

30

25

31

37

42

37

41

82

126

82

128

20

18

20

20

6. Choose the ion with the largest ionic radius. 2–

(A) S (B) H+ (C) Li+ (D) O2– (E) Mg2+ 7. You are given an aqueous solution of BaCl2. The simplest method for the separation of BaCl2 from the solution is (A) filtration of the solution (B) osmosis of the solution (C) evaporation of the solution to dryness (D) electrolysis of the solution (E) centrifuging the solution Choose one of the following for questions 8–10. 2+

(A) Cu 2– (B) CO3 (C) Fe3+ (D) Al3+ (E) Pb2+ 8. This ion is amphoteric. 9. This ion gives a white precipitate when added to a calcium nitrate solution.

11. Which of the following is the correct net ionic equation for the addition of aqueous potassium sulfate to a solution of barium chloride? 2–

2+ (A) Ba + SO4 → BaSO4 (B) Ba2+ + K2SO4 → BaSO4 + 2 K+ (C) BaCl2 + K2SO → BaSO4 + 2 KCl 2– 4 – (D) BaCl2 + SO4 → BaSO4 + 2 Cl (E) BaCl2 + P2SO4 → BaSO4+2 PCl

12. A solution is prepared for qualitative analysis. 2+ The solution contains the following ions: Pb , 2+ 3+ Ni , and Al . Which of the following will cause no observable reaction? (A) Dilute HCl(aq) is added. (B) Dilute K2CrO4(aq) is added. (C) Dilute KCl(aq) is added. (D) Dilute NH3(aq) is added. (E) Dilute HNO3(aq) is added. 13. The addition of concentrated BaCl2(aq) to a 1.0 M (NH4)2SO4 solution will result in which of the following observations? (A) Nothing happens because the two solutions are immiscible. (B) The formation of a white precipitate takes place. (C) An odorless gas forms and bubbles out of the mixture. (D) The solution becomes basic. (E) The odor of ammonia will be detected. 14. How many milliliters of 0.300 M H2SO4 are required to neutralize 50.0 mL of 0.600 M KOH? (A) 20.0 mL (B) 25.0 mL (C) 30.0 mL (D) 60.0 mL (E) 50.0 mL 15. How many grams of hydrogen are in 25 g of (NH4)2SO4? (A) 2.0 g (B) 8.0 g (C) 1.5 g (D) 3.0 g (E) 0.75 g

10. Solutions containing this ion give a reddishbrown precipitate upon standing. GO ON TO THE NEXT PAGE


16. Silver oxide, Ag2O, can be decomposed to silver metal, Ag, plus oxygen gas, O2. How many moles of oxygen gas will form when 4.64 g of solid silver oxide is decomposed? The formula mass of silver oxide is 232. (A) 0.100 mol (B) 0.0100 mol (C) 0.0200 mol (D) 0.0150 mol (E) 0.0250 mol 17. ____ C4H11N(l) + ____ O2(g) → ____ CO2(g) + ____ H2O(l)+ ____ N2(g) When the above equation is balanced, the lowest whole-number coefficient for N2 is: (A) 2 (B) 22 (C) 16 (D) 27 (E) 4 18. 2 KMnO4 + 5 H2C2O4 + 3 H2SO4 → K2SO4 + 2 MnSO4 + 10 CO2 + 8 H2O How many moles of MnSO4 are produced when 2.0 mol of KMnO4, 10 mol of H2C2O4, and 6.0 mol of H2SO4 are mixed? (A) 1.0 mol (B) 2.0 mol (C) 3.5 mol (D) 2.5 mol (E) 3.0 mol 19. When the following equation is balanced, it is found that 2.00 mol of C8H18 reacts with how many moles of O2? ____ C8H18+ ____ O2 → ____ CO2 + ____ H2O (A) 37.5 mol (B) 2.00 mol (C) 25.0 mol (D) 1.00 mol (E) 12.5 mol

20. Ra + 2 H2O → Ra(OH)2 + H2 Radium reacts with water according to the above reaction. What volume of hydrogen gas, at standard temperature and pressure, is produced from 0.0100 mol of radium? (A) 0.560 L (B) 0.224 L (C) 0.448 L (D) 0.112 L (E) 0.336 L 21. Three flexible containers are used for gases. The containers are at the same temperature and pressure. One container has 2.0 g of hydrogen, another has 32.0 g of oxygen and the third has 44.0 g of carbon dioxide. Pick the false statement from the following list: (A) The densities increase in the order hydrogen < oxygen < carbon dioxide. (B) The number of molecules in all the containers is the same. (C) The average kinetic energy of all the molecules is the same. (D) The volume of all three containers is the same. (E) The average speed of all the molecules is the same. 22. If a sample of SO2 effuses at a rate of 0.0035 mol per hour at 20°C, which of the gases below will effuse at approximately double the rate under the same conditions? (A) H2 (B) O2 (C) CO (D) He (E) CH4 Choose from the following types of energy for questions 23–26. (A) free energy (B) lattice energy (C) kinetic energy (D) activation energy (E) ionization energy


330 U STEP 5. Build Your Test-Taking Confidence 23. The energy required to produce a gaseous cation from a gaseous atom in the ground state 24. The average_____________is the same for any ideal gas at a given temperature. 25. The maximum energy available for useful work from a spontaneous reaction 26. The energy required to separate cations from anions in an ionic solid 27. When cerium(III) acetate, Ce(C2H3O2)3, is dissolved in water, the temperature increases. Which of the following conclusions may be related to this? (A) The hydration energies of cerium(III) ions and acetate ions are very low. (B) Cerium(III) acetate is less soluble in hot water. (C) The solution is not an ideal solution. (D) The heat of solution for cerium(III) acetate is endothermic. (E) The lattice energy of cerium(III) acetate is very low. 28. Choose the reaction expected to have the greatest increase in entropy. (A) 2 H2(g) + O2(g) → 2 H2O(g) (B) 2 Mn2O7(l) → 4 MnO2(s) + 3 O2(g) (C) C(s) + O2(g) → CO2(g) (D) 2 Ca(s) + O2(g) → 2 CaO(s) (E) NH3(g) → NH3(l) 29. A certain reaction is nonspontaneous under standard conditions, but becomes spontaneous at lower temperatures. What conclusions may be drawn under standard conditions? (A) ΔH < 0, ΔS < 0 and ΔG = 0 (B) ΔH > 0, ΔS < 0 and ΔG > 0 (C) ΔH < 0, ΔS > 0 and ΔG > 0 (D) ΔH > 0, ΔS > 0 and ΔG > 0 (E) ΔH < 0, ΔS < 0 and ΔG > 0

30. 4 NO2(g) + Oz(g) → 2 N2O5(g) ΔH = –111 kJ Determine ΔH for the above reaction if N2O5(s) were formed in the above reaction instead of N2O5(g). The ΔH of sublimation for N2O5 is 54 kJ/mol. (A) +54 kJ (B) +219 kJ (C) +165 kJ (D) –219 kJ (E) –165 kJ 31. Which of the following groups contains only atoms that are diamagnetic in their ground state? (A) He, Co, and Sr (B) Zn, Mg, and Xe (C) O, Be, and Ne (D) Ca, Mn, and Ar (E) As, Ba, and Rn The following ground-state electron configurations are to be used for questions 32–35: 2 6 2 3 (A) 1s 1p 2s 2p (B) 1s22s22p63s23p64s23dl04p65s24d1 (C) 1s22s22p63s23p63d3 (D) 1s22s22p5 (E) 1s22s22p63s23p64s23d104p6

32. It is not possible for this electron configuration to exist. 33. A halogen has this electron configuration. 34. A transition metal atom might have this configuration. 35. A transition metal ion could have this configuration. The following answers are to be used for questions 36–39: (A) Pauli exclusion principle (B) electron shielding (C) the wave properties of matter (D) Heisenberg uncertainty principle (E) Hund’s rule 36. The exact position of an electron is not known. 37. Nitrogen atoms, in their ground state, are paramagnetic. 38. An atomic orbital can hold no more than two electrons. GO ON TO THE NEXT PAGE


39. The 4s orbital fills before the 3d. 40. Which of the following does not have one or more π bonds? (A) HNO2 (B) N2 (C) N2H4 (D) HNO3 (E) N2H2 For questions 41 and 42, pick the best choice from the following: (A) ionic bonds (B) hybrid orbitals (C) resonance structures (D) hydrogen bonding (E) van der Waals attractions 41. The unusually high melting point of hydrogen fluoride is due to this. 42. Their presence explains why the bonds in BF3 are all the same. 43. Which of the following has more than one unshared pair of valence electrons on the central atom? – NH2

(A) (B) N2O5 (C) NH3– (D) NO2– (E) NO3 44. Which types of hybridization of carbon are in the compound propane, CH3CH2CH3? 3

I. sp II. sp2 III. sp (A) I only (B) II and III (C) I, II, and III (D) II only (E) I and II

45. The approximate boiling points for hydrogen compounds of some of the elements in the nitrogen family are: (SbH3 15°C), (AsH3 –62°C), (PH3 –87°C), and (NH3, –33°C). The best explanation for the fact that NH3 does not follow the trend of the other hydrogen compounds is (A) NH3 is the only one that is nearly ideal in the gas phase. (B) NH3 is the only one that is a base. (C) NH3 is the only one that is water-soluble. (D) NH3 is the only one to exhibit hydrogen bonding. (E) NH3 is the only one that is nonpolar. Choose the appropriate answer from the following list for questions 46 and 47. (A) London dispersion forces (B) covalent bonding (C) hydrogen bonding (D) metallic bonding (E) ionic bonding 46. This is why copper is ductile. 47. This is why acetic acid molecules exist as dimers in the gaseous phase. 48. Which of the following best explains why 1-butanol, CH3CH2CH2CH2OH, has a higher boiling point (117°C) than its isomer, methyl propyl ether, CH3OCH2CH2CH3 (39°C)? (A) the lack of hydrogen bonding in 1-butanol (B) the presence of hydrogen bonding in 1-butanol (C) the higher molecular mass of 1-butanol (D) the lower specific heat of 1-butanol (E) the higher density of 1-butanol 49. What additional information is needed to convert the molality of a 1.00 m Na2SO4 solution to the molarity? (A) the volume of the solution (B) the density of the solution (C) the boiling point of the solution (D) the osmotic pressure of the solution (E) the mass of the solution


332 U STEP 5. Build Your Test-Taking Confidence 50. All the following substances will dissolve in water. Pick the nonelectrolyte. (A) Ca(NO3)2 (B) KOH (C) C2H5OH (D) HCl (E) CH3COOH

54. For the following reaction, H2(g) + I2(g) → 2 HI(g), the rate law is: Rate = k[H2][I2]. If a small amount of iodine vapor (I2) is added to a reaction mixture that was 0.10 molar in H2 and 0.20 molar in I2, which of the following statements is true? (A) Both k and the reaction rate decrease. (B) Both k and the reaction rate increase. (C) Both k and the reaction rate remain the same. (D) Only k increases; the reaction rate remains the same. (E) Only the rate increases; k remains the same.

51. To prepare 4.0 L of a 0.50-molar KClO3 solution (molecular mass 122.6), a student should follow which of the following procedures? (A) The student should weigh 245.2 g of solute and add 4.0 L of water. (B) The student should weigh 61.3 g of solute and add sufficient water to obtain a final volume of 4.0 L. (C) The student should weigh 61.3 g of solute and add 4.0 Kg of water. (D) The student should weigh 245.2 g of solute and add sufficient water to obtain a final volume of 4.0 L. (E) The student should weigh 61.3 g of solute and add 4.0 L of water.

+ – 55. Step 1: (CH3)3CBr(aq) → (CH3)3C (aq) + Br (aq) + Step 2: (CH3)3C (aq) + H2O(l) → (CH3)3 COH2+(aq) + + Step 3: (CH3)3COH2 (aq) → H (aq) + (CH3)3 COH(aq)

The above represents a proposed mechanism for the hydrolysis of (CH3)3CBr. What are the overall products of the reaction? + – (A) (CH3)3C and Br + (B) (CH3)3COH2 and H+ (C) (CH3)3COH and H+ (D) (CH3)3COH, H+, and Br– (E) H+ and Br–

52. Choose the aqueous solution with the highest boiling point. (A) 0.20 M HNO3 (B) 0.20 M HClO (C) 0.40 M C3H7OH (D) 0.20 M KI (E) 0.20 M Na2SO4 53. Which of the following aqueous solutions freezes at the lowest temperature? (A) 0.25 m NaNO3 (B) 0.25 m FeSO4 (C) 0.25 m C12H22O11 (D) 0.25 m (NH4)2CrO4 (E) 0.25 m KCl

56. The table below gives the initial concentrations and rate for three experiments. INITIAL RATE INITIAL INITIAL OF FORMA[NO] TION OF N2O [H2] EXPERIMENT (mol L–1) (mol L–1) (mol L–1 s–1)

1

0.100

0.100

2.80 × 105

2

0.200

0.100

5.60 × 105

3

0.200

0.200

2.24 × 106

The reaction is H2(g) + 2 NO(g) → N2O(g) + H2O(g). What is the rate law for this reaction? (A) Rate = k[NO] 2 2 (B) Rate = k[NO] [H2] (C) Rate = k[H2] 2 (D) Rate = k[NO] [H2] (E) Rate = k[NO][H2]



57. A solution of a weak base is titrated with a solution of a standard strong acid. The progress of the titration is followed with a pH meter. Which of the following observations would occur? (A) At the equivalence point, the pH is below 7. (B) The pH of the solution gradually decreases throughout the experiment. (C) At the equivalence point, the pH is 7. (D) The pOH at the equivalence point equals the pKb of the base. (E) After the equivalence point, the pH becomes constant because this is the buffer region. 58. When potassium carbonate is dissolved in water (A) the solution is neutral. (B) the solution is basic because of hydrolysis of 2– the CO3 ion. (C) the solution is basic because of hydrolysis of + the K ion. (D) the solution is acidic because of hydrolysis of + the K ion. (E) the solution is acidic because of hydrolysis of 2– the CO3 ion. – 59. Determine the OH (aq) concentration in 0.10 M pyridine (C5H5N) solution. (Kb for pyridine is –9 9 × 10 .) –9 (A) 9 × 10 M –6 (B) 5 × 10 M –3 (C) 7 × 10 M –1 (D) 1 × 10 M –5 (E) 3 × 10 M + 2+ 60. FeS(s) + 2 H (aq) Fe (aq) + H 2 S(aq)

What is the equilibrium constant for the above reaction? The successive acid dissociation constants –8 –19 for H2S are 9.5 × 10 (Ka1) and 1 × 10 (Ka2). Ksp, the solubility product constant, for FeS –18 equals 5.0 × 10 . –27 –18 (A) 9.5 × 10 /5.0 × 10 –18 (B) 5.0 × 10 / 9.5 × 10–27 (C) 5.0 × 10–18/9.5 × 10–8 (D) 9.5 × 10–8/5.0 × 10–18 (E) 1 × 10–19/5.0 × 10–18

61. C 2H 2 (g) + H2O(g) CH3CHO(g) exothermic An equilibrium mixture of the reactants is placed in a sealed container at 150°C. The amount of the product may be increased by which of the following changes? I. adding 1 mol of Ar(g) to the container II. decreasing the volume of the container III. raising the temperature of the container (A) (B) (C) (D) (E)

I only II and III III only I and II II only

–30 62. Ksp for Cr(OH)3 is 1.6 × 10 . What is the molar solubility of this compound in water?

(A) (B)

4

4

1.6 × 10−30 1.6 × 10−30 /27

(C) 1.6 × 10−30 (D) 1.6 × 10−30 /27 (E)

2

1.6 × 10−30

Choose one of the following for questions 63–66. (A) There is no change in the voltage. (B) The voltage becomes zero. (C) The voltage increases. (D) The voltage decreases, but stays positive. (E) The voltage becomes negative. The following reaction takes place in a voltaic cell: 2+ 2+ Zn(s) + Cu (1 M) → Cu(s) + Zn (1 M)

The cell has its voltage measured and found to be +1.10 volts. 63. What happens to the voltage when deionized water is added to the zinc compartment? 64. What happens to the cell voltage when the copper electrode is made larger? 65. What happens to the cell voltage when the salt bridge is replaced with a zinc wire? 66. What happens to the cell voltage after the cell has operated for 15 min? GO ON TO THE NEXT PAGE

334 U STEP 5. Build Your Test-Taking Confidence 67. How many moles of Cr may be deposited on the cathode when 0.60 F of electricity is passed 3+ through a 1.0 M solution of Cr ? (A) 0.60 mol (B) 0.80 mol (C) 1.0 mol (D) 0.30 mol (E) 0.20 mol

71. If a current of 7.50 amp is passed through the electrolytic cell for 0.45 h, how should you calculate the grams of I2 to form? (A) (7.50)(0.45)(3600)(253.8)/(10) (B) (7.50)(0.45)(3600)(126.9)/ (96500)(10) (C) (7.50)(0.45)(60)(253.8)/(96500)(10) (D) (7.50)(0.45)(3600)(253.8)/ (96500)(10) (E) (7.50)(0.45)(126.9)/(96500)(10)

68. Co 2+ + 2e − → Co E ° = −0.28 v Zn 2+ + 2e − → Zn E ° = −0.76 v

72. The formation of

Given the above standard reduction potentials, estimate the approximate value of the equilibrium constant for the following reaction:

236 92

(A)

99 39

Y

(B)

96 38

Sr

3 H2O + 2 Bi

(C)

96 39

The reducing agent in the above reaction is which of the following?

(E)

69. 2 Bi3+ + 3

+ 6 OH– → 3

234 92

U occurs by

(A) electron capture (B) α decay (C) β decay (D) position decay (E) γ decay

4

(A) 10 (B) 1016 (C) 10–16 (D) 10–8 (E) 108 2– SnO3 +

Th from

73. What is the missing product in the following nuclear reaction?

Zn + Co 2 + → Zn 2+ + Co

2– SnO2

230 90

U → 4 10 n + 136 I + ____ 53

Y

(D) 98 Zr 40 98 41

Nb

3+

(A) Bi (B) SnO22– (C) Bi (D) H2O – (E) OH

O || 74. HO − C − CH 2 − CH3 The above compound would be classified as

Questions 70 and 71 are concerned with the following half-reaction in an electrolytic cell: –

–

2 IO3 + 6H2O + 10 e →I2 + 12 OH

–

70. Choose the correct statement from the following list. (A) This reaction occurs at the anode. (B) The iodine is reduced from +5 to –1. (C) The iodine is oxidized from –1 to 0. (D) This reaction occurs at the cathode. (E) Water is a catalyst.

(A) an aldehyde (B) a ketone (C) an ester (D) a carboxylic acid (E) an alcohol 75. The transition state is higher in energy than the reactants by an amount called (A) the heat of reaction (B) the reaction energy (C) the free energy (D) the kinetic energy (E) the activation energy

STOP. End of AP Chemistry Practice Exam 2—Multiple Choice


AP Chemistry Practice Exam 2—Free Response Time—1 hour and 35 minutes Answer the following questions in the time allowed. You may use the tables at the back of the book. Write the answers on a separate sheet of paper.

Part A. Time — 55 minutes You may use a calculator for part A. Question 1. C( s) + 2H 2 ( g ) CH 4 ( g ) The value of Kp for the above equilibrium is 0.262 at 1270 K. (a) Write the equilibrium constant expression for the above equation. (b) Determine the value of Kc for the above equation at this temperature. (c) What is the value of Kp for the following equilibrium at 1270 K? Justify your answer. CH 4 ( g ) C( s) + 2 H 2 ( g ) (d) Methane gas is introduced to a rigid container. The container is heated to 1270 K, and the initial partial pressure of the methane is 0.200 atm. What is the partial pressure of H2 once equilibrium has been established? (e) In a separate experiment, a container with the initial equilibrium established is heated to 1350 K. At the higher temperature, the amount of CH4 present has decreased, and the amount of H2 present has increased. Is the initial equilibrium endothermic or exothermic? Justify your answer. (f ) A small amount of carbon is introduced to a rigid container that is already at equilibrium. What changes, if any, would there be in the partial pressure of H2? Justify your answer. Question 2. I− ( aq ) + ClO− (aq ) → IO− (aq ) + Cl − (aq ) The above reaction occurs in basic solution. The following data were obtained from a series of experiments. INITIAL CONCENTRATIONS (MOLARITIES) [I ] [CIO-] [OH-]

INITIAL RATE (mol/L s)

Experiment 1

0.200

0.200

0.200

1.22

Experiment 2

0.400

0.200

0.200

2.44

Experiment 3

0.200

0.400

0.200

2.44

Experiment 4

0.200

0.200

0.400

0.610

Answer the following questions. – – – (a) Determine the order of the reaction for I , ClO , and OH . Justify your answers. (b) Write the rate law for the reaction.


336 U STEP 5. Build Your Test-Taking Confidence (c) Calculate the value of the rate constant. Include the units on the rate constant. (d) Assuming the reaction is exothermic, draw and label the potential energy-level diagram for the reaction. Question 3. 4 HCN( g ) + 5 O2 ( g ) → 4 CO2 ( g ) + 2 H 2O( g ) + 2N 2 (g ) Thermodynamic values related to the above reaction are given in the table below. ΔH f° (kJ/mol)

S ° (J/mol K)

CO2(g)

–393.5

213.7

HCN(g)

135

201.7

H2O(g)

–241.83

188.72

H2O(1)

–285.84

69.94

SUBSTANCE

(a) (b) (c) (d)

O2(g)

0

205.0

N2(g)

0

191.5

Calculate the enthalpy change for this reaction. Calculate the entropy change for this reaction. Calculate the standard free energy for this reaction at 25°C. Calculate the standard free energy change, at 25°C, if liquid water formed instead of water vapor.

STOP


Part B. Time — 40 minutes You may not use a calculator for part B. Question 4. Answer all three of the following questions. Each question will have two parts—writing the balanced chemical equation and answering a question about the reaction. Coefficients in the balanced chemical equation must be in the lowest whole-number ratio. Do not include formulas for substances that remain unchanged during the reaction. Unless otherwise noted, assume all the reactions occur in aqueous solution. If a substance is extensively ionized and therefore is present as ions in solution, write its formula as ions. Example: Hydrochloric acid is added to a lead(II) nitrate solution. Pb 2+ + 2Cl – → PbCl 2 (a) Excess ammonia solution is added to solid silver chloride. Which species behaves as a Lewis acid in this reaction? Explain. (b) Pentanol is combusted in oxygen. If one mole of pentanol totally reacts, how many total moles of products will be formed? (c) An ammonium chloride solution is mixed with a barium hydroxide solution. If equal volumes of 1 M ammonium chloride and 1 M barium hydroxide are mixed, what is the limiting reactant in this reaction? Question 5. 5 C 2O24− + 2 MnO4− + 16H + → Mn 2+ + 10 CO2 + 8 H 2 O The above reaction is to be used in the analysis of an oxalate sample. (a) Outline the general procedure for the standardization of a potassium permanganate solution beginning with primary standard sodium oxalate. (b) Outline the calculation of the concentration of the potassium permanganate solution. (c) Show how to calculate the percent sodium oxalate in an unknown. (d) List the problems arising if the primary sodium oxalate solution was not dried before being weighed. (e) Normally, sulfuric acid is used to supply the hydrogen ions for the reaction. What would be the problem of substituting hydrochloric acid for sulfuric acid? Question 6. Five beakers (A–E) are placed on a counter top. Each contains 200 mL of a 0.10 M solution. Beaker A contains Ba(OH)2; beaker B contains (NH4)2SO4; beaker C contains (CH3)2CHOH; beaker D contains K3PO4; and beaker E contains FeSO4. (a) Which beaker has the lowest pH? Explain. (b) Which two beakers may be mixed to produce a gas with a characteristic odor? Write a chemical equation for the reaction. (c) Which of the solutions has its freezing point depressed the least? Explain. (d) Which two solutions are basic? (e) Which other beaker will not give a precipitate when added to beaker A? Explain. STOP. End of AP Chemistry Practice Exam 2


U Answers and Explanations for Exam 2—Multiple Choice 1. B—All but B and D are Lewis bases. The higher charge on iron makes the difference

21. E—The average kinetic energy, not the average speed, is the same.

2. C—In general, the more oxygens present, the stronger the oxyacid.

22. E—Use Graham’s law.

3. C—Only C can be oxidized.

24. C—Kinetic molecular theory

4. B—The phenolphthalein is the source of the color change.

25. A—Definition—a property of free energy

5. A—If the numbers of protons are equal, the atoms are isotopes. 6. A—Anions are usually larger than cations. S is lower on the periodic table than O. 7. C—Solutions do not readily separate. 8. D—This is a property of aluminum.

23. E—Definition

26. B—Definition 27. B—This is an exothermic process, and exothermic processes do not proceed as well at higher temperatures. 28. B—The reaction that has the greatest increase in the number of moles of gas.

10. C—Iron slowly hydrolyzes to form solid Fe(OH)3.

29. E—To become spontaneous at a lower temperature means entropy impeded the reaction (entropy was negative). The enthalpy must be negative. Nonspontaneous under standard conditions means: ΔG > 0.

11. A—Soluble compounds and spectator ions should not be present.

30. D—Subtract 54 × 2 mol N2O5 from the observed value (use Hess’s law).

12. E—A and C precipitate PbCl2. B precipitates PbCrO4. D precipitates Al(OH)3.

31. B—These have completely filled shells or subshells—all the electrons are paired = diamagnetic.

13. B—BaSO4 forms.

32. A—No such thing as a 1p orbital.

14. E—(50.0 mL)(0.600 mol KOH/1000 mL)(1 mol H2SO4/2 mol KOH) (1000 mL/0.300 mol H2SO4)

2 5 33. D—All halogens are ns np .

9. B—The precipitate is CaCO3.

15. C—(25 g (NH4)2SO4)(1 mol(NH4)2SO4/132 g (NH4)2SO4)(8 mol H/1 mol (NH4)2SO4) (1 g H/ mol H) 16. B—(4.64 g oxide)(l mol oxide/232 g mol O2/2 mol oxide) = 0.00927 mol 17. A—4 C4H11N(l) + 27 O2(g) → 16 CO2(g) + 22 H2O(l) + 2 N2(g) 18. B—KMnO4 is the limiting reactant. 19. C—2 C8H18 + 25 O2 → 6 CO2 + 18 H2O 20. B—(0.0100 mol Ra)(1 mol H2/1 mol Ra)(22.4 L/ mol H2) = 0.224 L

34. B—A partially filled d orbital is required with an 1 2 s or s . 2+ 35. C—This is V .

36. D—Definition 37. E—The electrons enter the orbitals separately (unpaired) until forced to pair. Unpaired = paramagnetic. 38. A—Application of the definition. 39. B—This is a consequence of the better shielding of d electrons over s electrons. 40. C—There are only single bonds (σ) present.


41. D—Hydrogen bonding may occur when hydrogen is attached directly to N, O, or F. 2 42. B—B has three equivalent sp orbitals.

43. A—C and D have one unshared pair, whereas E has none. 44. A—All three carbons have four single bonds. 45. D—Hydrogen bonding is possible when hydrogen is attached to N, O, and F. 46. D—A consequence of metallic bonding. 47. C—The two molecules are hydrogen bonded together. 48. B—The presence of the −OH group makes hydrogen bonding possible. 49. B—This is a dimensional analysis problem. 50. C—A is a soluble ionic compound; all the others are acids or bases. C is a neutral molecular compound. 51. D—(0.50 mol/L)(4.0 L)(122.6 g/mol) = 245.2 g and dilute to volume.

58. B—The carbonate ion is the conjugate base of a weak acid, and will produce a basic solution. The potassium ion comes from a strong base and will not undergo hydrolysis or change the pH. – –9 1/2 –5 59. E—[OH ] = (0.10 × 9 × 10 ) = 3 × 10 M –18 –8 60. B—K = Ksp/Ka1Ka2 = 5.0 × 10 /(9.5 × 10 ) –19 (1 × 10 )

61. E—I will yield no change, and III will decrease the amount of product. 3+ – 3 3 4 62. B—Ksp = [Cr ][OH ] = (x)(3x) = 27 x = –30 1.6 × 10 . Solve for x. 2+ 63. C—This will lower the concentration of Zn , causing a shift to the right.

64. A—The size of the electrode is irrelevant. 65. B—A source of cations and anions is needed. 66. D—As the cell begins to run, the voltage decreases. 67. E—(0.60 F)(l mol Cr/3F) 68. B—log K = nE°/0.0592 = 16 [2 × (0.76 – 0.28)]/0.0592 = 16, K = 10

52. E—The substance producing the largest concentration of ions will have the highest boiling point.

69. B—Bi3+ is the oxidizing agent.

53. D—The substance producing the largest concentration of ions will have the lowest freezing point.

70. D—Reduction reactions like this one always occur at the cathode.

54. E—Placing a larger number into the rate law will give a larger rate. The rate constant, k, is constant (unless the temperature changes or a catalyst is added).

71. D—Dimensional analysis:

55. D—Add the equations together and cancel any species that appear on both sides. 56. D—The reaction is first-order in H2 and secondorder in NO. 57. A—Strong acids and weak bases have pH = 7 at the equivalence point. The presence of a weak base lowers this value.

(7.50 coul/s)(0.45 h)(3600 s/h)(253.8 g I2/mol I2)/ (96500 coul/F)(10 F) 72. B—Mass difference = 234 – 230 = 4, and atomic number difference = 92 – 90 = 2. These correspond to an α particle. 73. C—Mass difference = 236 – 4(1) – 136 = 96. Atomic number difference = 92 – 4(0) – 53 = 39. 74. D—Based on classification of organic compounds. 75. E—Definition

Count the answers you got correct. Then count the answers you got wrong (skip those you did not answer). Multiply the number of wrong answers by 0.25 and subtract this value from the number of correct answers. This gives you your score on this set of questions.


U Answers and Explanations for Exam 2—Free Response Question 1. 2

(a) Kp = PCH4/PH 2 = 0.262 You get 1 point for the correct equation. The “= 0.262” is optional. Δn

(b) Kc = Kp/(RT ) (This is from one of the equations given in the AP Exam booklet.) Δn = 1 − 2 = −1 K c = 0.262 /[(0.0821)(1270)]−1 = 27.3 You get 1 point for the correct answer, and 1 point for choosing the correct equation. (c) Knew = 1/Kp = 1/0.262 = 3.82 When the equilibrium is reversed, you take the reciprocal of the equilibrium constant. You get 1 point for the answer, and 1 point for the explanation. (d)

K p = PCH4 /P H2 2 = 0.262

initial change equilibrium Substituting:

PH2

PCH4

0.000 +2x 2x

0.200 –x 0.200 – x

K p = (0.200 − x )/( 2x )2 = 0.262 x = 0.170 PH = 2x = 0.340 atm 2

You get 1 point for the correct answer, you get 1 point for the table, and you get 1 point for the setup. You could correctly use the equation and answer from part (c). (e) The reaction is exothermic. The change in the amounts of CH4 and H2 indicate the reaction has shifted to the left. Exothermic reactions shift to the left as the temperature increases. You get 1 point for answering exothermic, and 1 point for the explanation. You may get the explanation point even if you answered endothermic. (f ) There would be no change. Solids do not shift equilibria. You get 1 point for “no change,” and 1 point for the explanation. Total your points for each part. There are 12 possible points. Subtract one point if you do not have the correct number of significant figures in all cases. Question 2. –

–

– (a) The orders for I and ClO are 1. The order for OH is –1. If you get all three of these correct, you get 1 point. –

Comparing Experiments 1 and 2: The concentration of I is doubled, and the rate is doubled. This – leads to I having an order of 1. You get 1 point for this reasoning.


Comparing Experiments 1 and 3: The concentration of ClO– is doubled, and the rate is doubled. – This leads to ClO having an order of 1. You get 1 point for this reasoning. – Comparing Experiments 1 and 4: The concentration of OH is doubled, and the rate is halved. This – – leads to OH having an order of 1. You get 1 point for this reasoning. – – – –1 (b) Rate = k[I ][ClO ][OH ] This answer is worth 1 point. You will still get 1 point if you use incorrect orders from part (a). – – – –1 (c) Rearrange the rate law to: k = Rate/[I ][ClO ][OH ] The values from any of the experiments may be plugged into this formula. Using Experiment 1:

k = 1.22 /[0.200][0.200][0.200]−1 = 6.10 s −1 You get 1 point for entering the values into the rearranged equation from part (b). You get 1 point for the units. (d)

activated complex

Ea reactants

ΔHrxn products reaction progress

You get 1 point for showing the products being lower than the reactants. You get 1 point for labeling the activation energy. You get 1 point for correctly labeling ΔH. Total your points for the different parts. There are 10 possible points. Subtract one point if you did not report the correct number of significant figures in part (c). Question 3. (a) ΔH°rxn = [4(–393.5) + 2(–241.83) + 2(0)] – [4(135) + 5(0)] = –2598 kJ The setup (products – reactants) is worth 1 point, and the answer is worth 1 point. You do not need to get the exact answer, but you should be able to round to this one. (b) ΔS°rxn = [4(213.7) + 2(188.72) + 2(191.5)] – [4(201.7) + 5(205.0)] = –216.6 J/K The setup (products – reactants) is worth 1 point, and the answer is worth 1 point. You do not need to get the exact answer, but yours should round to this one. (c) ΔG°rxn = ΔH°rxn – TΔS°rxn = –2598 kJ–(298 K)(l kJ/1000J)(–216.6 J/K) = –2533 kJ The setup (putting values into the equation) is worth 1 point if you remember to change the temperature to kelvin and convert joules to kilojoules. An additional 1 point comes from the answer. If you got the wrong value in either part (a) or (b), but used it correctly, you will still get the point for the answer. The free-energy equation is part of the material supplied in the exam booklet. (d) This requires a repeat of parts (a)–(c) using the values for H2O(l). ΔH°rxn = [4(–393.5) + 2(–285.84) + 2(0)] – [4(135) + 5(0)] = –2686 kJ ΔS°rxn = [4(213.7) + 2(69.94) + 2(191.5)] – [4(201.7) + 5(205.0)] = –454.1 J/K

342 U STEP 5. Build Your Test-Taking Confidence ΔG°rxn = ΔH°rxn – TΔS°rxn = –2686 kJ–(298 K)(l kJ/1000 J)(–454.1 J/K) = –2551 kJ You get 1 point for the work and 1 point for the answer. Total your points and subtract one point if all reported answers did not have the correct number of significant figures. Question 4. (a) 2 NH3 + AgCl → [Ag(NH3 )2 ]+ + Cl – The silver cation accepts a pair of electron from the ammonia, making the silver ion the Lewis acid. You get 1 point for the correct formulas for the reactants and products, and 1 point for the correct coefficients in the balanced equation. Answering the associated question correctly is worth 1 point. (b) 2C 5H11OH + 15 O2 → 10 CO2 + 12 H 2O There will be 11 moles of product formed if 1 mole of pentanol reacts. You get 1 point for the correct formulas for the reactants and products, and 1 point for the correct coefficients in the balanced equation. Answering the associated question correctly is worth 1 point. (c) NH+4 + OH – → NH3 + H 2O The ammonium chloride (or ammonium ion) is the limiting reactant. You get 1 point for the correct formulas for the reactants and products, and 1 point for the correct coefficients in the balanced equation. Answering the associated question correctly is worth 1 point. Question 5. (a) 1. Samples of primary standard sodium oxalate are weighed into beakers, and deionized water is added to dissolve each of the samples. 2. A buret is rinsed with the potassium permanganate solution and then filled. 3. The potassium permanganate solution is titrated into the oxalate sample until a permanent pink color from the permanganate solution appears. All three of these will get you 2 points. One or two of these will get you 1 point. Other items, such as heating the oxalate solution before the titration, are not needed. – 2– – (b) (gram sample)[(1 mol Na2C2O4/134 g)][(2 mol MnO4 /5 mol C2O4 )] [(1/L MnO4 added)]

This entire setup will get 2 points (the 134 is optional). You get 1 point if you miss a step. (c) Percent sodium oxalate = (grams sodium oxalate/grams sample) × 100% You get 1 point for this answer. (d) If the primary standard was not dried, the sample would contain less sodium oxalate than indicated by the mass. The calculated concentration of the potassium permanganate solution would be too low. This item is worth 1 point. A low concentration for the potassium permanganate solution would yield a low percentage of sodium oxalate in the sample. This item is worth 1 point. (e) Hydrochloric acid reacts with permanganate ion. This answer is worth 1 point. Total your points for the various parts. There are 8 possible points.


Question 6. + (a) Beaker B has the lowest pH. The NH4 ion is the conjugate acid of a weak base, and as an acid (weak) it will lower the pH.

You get 1 point for the correct beaker. You get 1 point for the explanation. (b) Solutions A and B produce a gas with a characteristic odor when mixed. The reaction is: – + NH4 (aq) + OH (aq) → NH3(g) + H2O(1)

or (NH4)2SO4(aq) + Ba(OH)2(aq) → 2 NH3(g) + 2 H2O(1) + BaSO4(s) You get 1 point for the correct two solutions, and you get 1 point for either of the balanced equations. (c) Solution C has the lowest freezing-point depression. This solution is the only nonelectrolyte present. The electrolytes depress the freezing point to a greater extent. You get 1 point for the correct solution, and 1 point for the explanation. (d) Solutions A and D. You get 1 point for each of these you get correct. (e) Solution C will give no precipitate. Beaker B gives BaSO4. Beaker D gives Ba3(PO4)2. Beaker E gives Fe(OH)2 and BaSO4. You get 1 point for choosing solution C. You get 1 point for listing the other precipitates or explaining that beaker C contains a nonelectrolyte that will not react with either barium ions or hydroxide ions. Total your points for the different parts. There are 10 possible points. TOTAL SCORE: Question 1 Question 2 Question 3 Question 4 Question 5 Question 6

———— ———— ———— ———— ———— ————


Appendixes

SI Units Balancing Redox Equations Using the Ion Method Common Ions Bibliography Web sites Glossary Exam Resources


SI UNITS SI Prefixes PREFIX

ABBREVIATION

MEANING

piconanomicromillicentidecidekahectokilo MegaGigaTera-

p n μ m c d da h k M G T

0.000000000001 or 10−12 0.000000001 or 10−9 0.000001 or 10−6 0.001 or 10−3 0.01 or 10−2 0.1 or 10−1 10 or 101 100 or 102 1000 or 103 1,000,000 or 106 1,000,000,000 or 109 1,000,000,000,000 or 1012

SI Base Units and SI/English Conversions Length The base unit for length in the SI system is the meter. 1 kilometer (km) = 0.62 mile (mi) 1 mile (mi) = 1.61 kilometers (km) 1 yard (yd) = 0.914 meters (m) 1 inch (in) = 2.54 centimeters (cm)

Mass The base unit for mass in the SI system is the kilogram (kg). 1 pound (lb) = 454 grams (g) 3 1 metric ton (t) = 10 kg

Volume The unit for volume in the SI system is the cubic meter (m3). 3 1 dm = 1 liter (L) = 1.057 quarts (qt) 3 1 milliliter (mL) = 1 cubic centimeter (cm ) 1 quart (qt) = 0.946 liters (L) 1 fluid ounce (fl oz) = 29.6 milliliters (mL) 1 gallon (gal) = 3.78 liters (L)

Í 347

348 U SI Units

Temperature The base unit for temperature in the SI system is kelvin (K). Celsius to Fahrenheit: °F = (9/5)°C + 32 Fahrenheit to Celsius: °C = (5/9)(°F − 32) Celsius to kelvin: K = °C + 273.15

Pressure The unit for pressure in the SI system is the pascal (Pa). 1 millimeter of mercury (mm Hg) = 1 torr 2 2 1 Pa = 1 N/m = 1 kg/m s s 1 atm = 1.01325 × 10 Pa = 760 torr 5 1 bar = 1 × 10 Pa

Energy The unit for energy in the SI system is the joule (J). 2 2 1 J = 1 kg m /s = 1 coulomb volt 1 calorie (cal) = 4.184 joules (J) 1 food Calorie (Cal) = 1 kilocalorie (kcal) = 4184 joules (J) 1 British thermal unit (BTU) = 252 calories (cal) = 1053 joules (J)

BALANCING REDOX EQUATIONS USING THE ION-ELECTRON METHOD The following steps may be used to balance oxidation–reduction (redox) equations by the ion-electron (half-reaction) method. While other methods may be successful, none is as consistently successful as is this particular method. The half-reactions used in this process will also be necessary when considering other electrochemical phenomena, thus the usefulness of half-reactions goes beyond balancing redox equations. The basic idea of this method is to split a “complicated” equation into two parts called half-reactions. These simpler parts are then balanced separately, and recombined to produce a balanced overall equation. The splitting is done so that one of the half-reactions deals only with the oxidation portion of the redox process, whereas the other deals only with the reduction portion. What ties the two halves together is the fact that the total electrons lost by the oxidation process MUST equal the total gained by the reduction process (step 6). It is very important that you follow each of the steps listed below completely, in order; do not try to take any short cuts. There are many modifications of this method. For example, a modification allows you to balance all the reactions as if they were in acidic solution followed by a step, when necessary, to convert to a basic solution. Switching to a modification before you completely understand this method very often leads to confusion, and an incorrect result.

1. Assign Oxidation Numbers and Begin the Half-Reactions, One for Oxidation and One for Reduction Beginning with the following example (phases are omitted for simplicity): + 3+ 2− CH3OH + Cr2O7 + H → HCOOH + Cr + H2O

(For many reactions, the substance oxidized, and the substance reduced will be obvious, so this step may be simplified. However, to be safe, at least do a partial check to confirm your predictions. Note: One substance may be both oxidized and reduced; do not let this situation surprise you—it is called disproportionation.) Review the rules for assigning oxidation numbers if necessary, in the Basics chapter. These numbers are only used in this step. Do not force them into step 5. Start the half-reactions with the entire molecules or ions from the net ionic form of the reaction. Do not go back to the molecular form of the reaction or just pull out atoms from their respective molecules or ions. Thus from the example above, the initial half-reactions should be: CH3OH → HCOOH 3+ 2− Cr2O7 → Cr

Í 349

350 U Balancing Redox Equations Using the Ion-Electron Method The carbon is oxidized (C2− to C2+) and the chromium is reduced (Cr6+ to Cr3+). Check to make sure you get the same oxidation numbers for the carbon and the chromium (hydrogen and oxygen are +1 and −2 respectively).

2. Balance All Atoms Except Oxygen and Hydrogen (In many reactions this will have been done in step 1; because of this many people forget to check this step. This is a very common reason why people get the wrong result.) In the above example, carbon (C) and chromium (Cr) are the elements to be considered. The carbon is balanced, so no change is required in the first half-reaction. The chromium needs to be balanced, and so the second half-reaction becomes: 3+ 2− Cr2O7 → 2 Cr

TIP

Note: To carry out the next two steps correctly, it is necessary to know if the solution is acidic or basic. A basic solution is one that you are specifically told is basic, or one that con− tains a base of OH anywhere within the reaction. Assume that all other solutions are acidic (even if no acid is present).

3. Balance Oxygen Atoms a. In Acidic Solutions Add 1 H2O/O to the Side Needing Oxygen b. In Basic Solutions Add 2 OH− for Every Oxygen Needed on the Oxygen-Deficient Side, Plus 1 H2O/O on the Opposite Side

Do not forget that two things (OH− and H2O) must be added in a basic solution. Also these must be added to opposite sides. Examples:

Cr2O72− → 2 Cr3+

acid: becomes:

3+ 2− Cr2O7 → >2 Cr + 7H2O

Now an example base:

Cr2O72− → 2 CrO2−

base: becomes:

− 2− − 3 H2O + Cr2O7 → 2 CrO2 + 6 OH

4. Balance Hydrogen Atoms a. In Acidic Solutions Add H+(aq) b. In Basic Solutions Add 1 H2O/H Needed, Plus 1 OH−/H on the Opposite Side Again, do not forget that two things must be added in basic solutions (OH− and H2O). In this case they are still added to opposite sides, but with a different ratio.

Balancing Redox Equations Using the Ion-Electron Method Í 351 Examples:

Cr2O72− → 2 Cr3+ + 7 H2O

acid: becomes:

2− 14 H+(aq) + Cr2O7 → 2 Cr3+ + 7 H2O

Now an example base: −

6 OH + C2H5OH → 2 CO2 + 3 H2O

base: becomes: −

−

6 OH + 6 OH + C2H5OH → 2 CO2 + 3 H2O + 6 H2O If the basic step is done correctly, the oxygens should remain balanced. This may be used as a check at this point.

5. Balance Charges by Adding Electrons The electrons must appear on opposite sides of the two half-reactions. They will appear on the left for the reduction, and on the right for the oxidation. Once added, make sure you check to verify that the total charge on each side is the same. Not being careful on this step is a major cause of incorrect answers. Do not forget to use both the coefficients and the overall charges on the ions (not the oxidation numbers from step 1). Examples:

6 e− + 14 H+(aq) + Cr2O7 → 2 Cr3+ + 7 H2O 2−

acid: base:

− − − 6 OH + 6 OH + C2H5OH → 2 CO2 + 3 H2O + 6 H2O + 12 e

6. Adjust the Half-Reactions So That They Both Have the Same Number of Electrons (Find the lowest common multiple, and multiply each of the half-reactions by the appropriate factor to achieve this value. This is the key step, as the number of electrons lost MUST equal the number gained.) Example:

Lowest common multiple = 12 + − 3 × (H2O + CH3OH → HCOOH + 4 H (aq) + 4 e ) −

+

2−

3+

2 × (6 e + 14 H (aq) + Cr2O7 → 2 Cr + 7 H2O) Giving: + − 3 H2O + 3 CH3OH → 3 HCOOH + 12 H (aq) + 12 e

12 e− + 28 H+(aq) + 2 Cr2O72− → 4 Cr3+ + 14 H2O

352 U Balancing Redox Equations Using the Ion-Electron Method

7. Add the Half-Reactions and Cancel (The electrons must cancel) Example (from step 6): − + 2− 12 e + 3 H2O + 3 CH3OH + 28 H (aq ) + 2 Cr2O7

→ 4 Cr3+ + 14 H2O + 3 HCOOH + 12 H+(aq ) + 12 e− Becomes: + 3+ 2− 3 CH3OH + 16 H (aq ) + 2 Cr2O7 → 4 Cr + 11 H2O

+ 3 HCOOH

8. Check to See If All Atoms Balance and That the Total Charge on Each Side Is the Same This step will let you know whether you have done everything correctly. If all the atoms and charges do not balance, you have made a mistake. Look over your work. If you have made an obvious mistake, then you should correct it. If the mistake is not obvious, it may take less time to start over from the beginning. The most common mistakes are made in steps 2 and 5, or step 3 in a basic solution. Make sure you learn to apply each of the above steps. Look over the individual examples and make sure you understand them separately. Then make sure you learn the order of these steps. Finally, balance redox reactions; this will take a lot of practice. Make sure that you reach the point of being able to consistently balance equations without looking at the rules.

COMMON IONS Ions Usually With One Oxidation State Li+ + Na + K 2+ Mg 2+ Ca 2+ Sr 2+ Ba + Ag 2+ Zn 2+ Cd 3+ Al

N3− O2− S2− F− Cl− Br− I−

lithium ion sodium ion potassium ion magnesium ion calcium ion strontium ion barium ion silver ion zinc ion cadmium ion aluminum ion

nitride ion oxide ion sulfide ion fluoride ion chloride ion bromide ion iodide ion

Cations With More Than One Oxidation State +1 l+

Cu Hg22+

+2

copper(I) ion or cuprous ion mercury(I) ion or mercurous ion

2+

Cu 2+ Hg

copper(II) ion or cupric ion mercury(II) ion or mercuric ion

+2 2+

Fe 2+ Cr 2+

Mn

2+

Co

+3

iron(II) ion or ferrous ion chromium(II) ion or chromous ion manganese(II) ion or manganous ion cobalt(II) ion or cobaltous ion

3+

Fe 3+ Cr

iron(III) ion or ferric ion chromium(III) ion or chromic ion manganese(III) ion or manganic ion cobalt(III) ion or cobaltic ion

Mn3+ Co3+

+2 2+

Sn 2+ Pb

+4

tin(II) ion or stannous ion lead(II) ion or plumbous ion

Sn4+ Pb4+

tin(IV) ion or stannic ion lead(IV) ion or plumbic ion

Polyatomic Ions and Acids Formula

H2SO4 H2SO3 HNO3 HNO2

Name

sulfuric acid sulfurous acid nitric acid nitrous acid

Ion

Ion name 2−

SO4 SO32− NO3− NO2−

sulfate ion sulfite ion nitrate ion nitrite ion Í 353

354 U Common Ions Formula

Name

Ion

Ion name

H3PO4 H2CO3 HMnO4 HCN HOCN HSCN HC2H3O2 H2C2O4 H2CrO4 H2Cr2O7 H2S2O3 H3AsO4 H3AsO3

phosphoric acid carbonic acid permanganic acid hydrocyanic acid cyanic acid thiocyanic acid acetic acid oxalic acid chromic acid dichromic acid thiosulfuric acid arsenic acid arsenous acid

PO43− CO32− MnO4− − CN − OCN − SCN C2H3O2− C2O42− CrO42− Cr2O72− S2O32− AsO43− AsO33−

phosphate ion carbonate ion permanganate ion cyanide ion cyanate ion thiocyanate ion acetate ion oxalate ion chromate ion dichromate ion thiosulfate ion arsenate ion arsenite ion

Oxy name

Ion

Ion name

Oxyhalogen Acids Formula

HClO HClO2 HClO3 HClO4

−

hypochlorous acid chlorous acid chloric acid perchloric acid

ClO ClO2− ClO3− ClO4−

hypochlorite ion chlorite ion chlorate ion perchlorate ion

Br, I, can be substituted for chlorine Cl. F may form hypofluorous acid and the hypofluorite ion.

Other Ions Ion

Ion name

2−

O2 − OH HSO4− NH4+ O2− HCO3− HPO42− H2PO4−

peroxide ion hydroxide ion bisulfate ion; hydrogen sulfate ion ammonium ion superoxide ion bicarbonate ion; hydrogen carbonate ion hydrogen phosphate ion dihydrogen phosphate ion

Ligand

Formula(abbreviation)

Ligands Bromide ion Carbonate ion Chloride ion

−

Br CO32− − Cl

Ligand name bromo carbonato chloro

Common Ions Í 355

Ligand Cyanide ion Fluoride ion Hydride ion Hydroxide ion Iodide ion Nitrite ion Oxalate ion Sulfide ion Thiocyanate ion Ammonia Ethylenediamine Water

Formula(abbreviation) −

CN − F − H − OH − I NO2− C2O42− 2− S − SCN NH3 en H 2O

Ligand name cyano fluoro hydrido hydroxo iodo nitrito oxalato thio thiocyanato ammine ethylenediamine aqua

Colors of Common Ions in Aqueous Solution Most common ions are colorless in solution, however, some have distinctive colors. These colors have appeared in questions on the AP exam. 2+ 3+ Fe and Fe 2+ Cu 2+ Cr 3+ Cr 2+ Mn 2+ Ni 2+ Co MnO4− CrO42− Cr2O72−

various colors blue to green blue green or violet faint pink green pink dark purple yellow orange

BIBLIOGRAPHY Brown, Theodore L., H. Eugene Le May, Jr., and Bruce E Bursten. 2006. Chemistry. The Central Science, 10th ed. Upper Saddle Creek, NJ: Prentice Hall.

Moore, John T. and Richard Langley. 2007. Chemistry for the Utterly Confused. New York: McGraw-Hill.

Cates, Charles R., Richard H. Langley, and John T. Moore. 2003. Introductory Chemical Practice: A Quantitative Approach, 6th ed. San Francisco, CA.

Russo, Steve and Mile Silver. 2002. Introductory Chemistry, 2nd ed. San Francisco: Benjamin Cummings.

Goldberg, David E. 2001. Fundamentals of Chemistry, 3rd ed. New York: McGraw-Hill, NY.

Silberberg, Martin S. 2006. Chemistry: The Molecular Nature of Matter and Change, 4th ed. New York: McGraw-Hill.

Hostage, David and Martin Fossett. 2005. Laboratory Investigations: AP Chemistry, Saddle Brook, NJ: Peoples Publishing Group. Moore, John T. 2003. Chemistry for Dummies. New York: Wiley Publishing, Inc.

356 U

Zumdahl, Steven S. and Susan A. Zumdahl. 2007. Chemistry, 7th ed. Boston, MA: Houghton Mifflin Company.

WEB SITES Here is a list of Web sites that contain information and links that you might find useful in your preparation for the AP Chemistry exam: www.chemistry.org/portal/a/c/s/1/home.html www.chemistry.about.com www.webelements.com www.chemclub.com http://.ice.chem.wisc.edu www.collegeboard.com/ap/students/chemistry www.shs.nebo.edu/Faculty/Haderlie/apchem/apchem.html www.chemistrygeek.com/ap.htm www.chem.purdue.edu/apchem/MainPage/AP_References/KEYS_TO_PASS.html http://jchemed.chem.wisc.edu/ www.rsc.org/ www.raci.org.av/index.html

Í 357

GLOSSARY absolute zero Absolute zero is 0 K and is the point

anode compartment The anode compartment is

at which all molecular motion ceases. acidic A solution whose pH is less than 7.00 is said to be acidic. + acids Acids are proton (H ) donors. acid dissociation constant (Ka) The acid dissociation constant is the equilibrium constant associated with a weak acid dissociation in water. activation energy Activation energy is the minimum amount of energy that must be supplied to initiate a chemical reaction. activity series for metals The activity series lists metals in order of decreasing ease of oxidation. actual yield The actual yield is the amount of product that is actually formed in a chemical reaction. alkali metals Alkali metals are in Group 1 on the periodic table. alkaline earth metals Alkaline earth metals are in Group 2 on the periodic table. alkanes Alkanes are hydrocarbons that contain only single covalent bonds within the molecule. alkenes Alkenes are hydrocarbons that contain a carbon-to-carbon double bond. alkynes Alkynes are hydrocarbons that contain a carbon-to-carbon triple bond. alpha particle An alpha particle is essentially a helium nucleus with two protons and two neutrons. amorphous solids Amorphous solids are solids that lack extensive ordering of the particles. amphoteric Amphoteric substances will act as either an acid or a base, depending on whether the other species is a base on an acid. amplitude Amplitude is the height of a wave and is related to the intensity (or brightness for visible light) of the wave. amu An amu is 1⁄12 the mass of a carbon atom that contains 6 protons and 6 neutrons (C-12). angular momentum quantum number (l) The angular momentum quantum number is the quantum number that describes the shape of the orbital. anions Anions are negatively charged ions. anode The electrode at which oxidation is taking place is called the anode.

the electrolyte solution in which the anode is immersed. aqueous solution An aqueous solution is a solution in which water is the solvent. atomic number (Z) The atomic number of an element is the number of protons in the nucleus. atomic orbital The atomic orbital is the region of space in which it is most likely to find a specific electron in an atom. atomic solids In atomic solids, individual atoms are held in place by London forces. Aufbau principle The Aufbau principle states that the electrons in an atom fill the lowest energy levels first. Avogadro’s law Avogadro’s law states that there is a direct relationship between the volume and the number of moles of gas. Avogadro’s number Avogadro’s number is the number of particles (atoms or molecules or ions) 23 in a mole and is numerically equal to 6.022 × 10 particles. barometer A barometer is an instrument for measuring atmospheric pressure. base dissociation constant, Kb The base dissociation constant is the equilibrium constant associated with the dissociation of a weak base in water. + bases Bases are defined as proton (H ) acceptors. basic A solution whose pH is greater than 7.00 is called basic. beta particle A beta particle is an electron. bimolecular reactions Bimolecular reactions are chemical reactions that involve the collision of two chemical species. binary compounds Binary compounds are compounds that consist of only two elements. body-centered unit cell A body-centered unit cell has particles located at the corners of a cube and in the center of the cube. boiling The process of going from the liquid state to the gaseous state is called boiling. boiling point The boiling point (b.p.) is the temperature at which a liquid boils.

358 U

Glossary Í 359 bond order The bond order relates the bonding

combination reactions Combination reactions are

and antibonding electrons in the molecular orbital theory (# electrons in bonding MOs – # electrons in antibonding MOs)/2. Boyle’s law Boyle’s law states that there is an inverse relationship between the volume and pressure of a gas, if the temperature and amount are kept constant. buffer capacity The buffer capacity is the ability of the buffer to resist a change in pH. buffers Buffers are solutions that resist a change in pH when an acid or base is added to them. calorie The calorie is the amount of energy needed to raise the temperature of 1 gram of water 1°C. calorimetry Calorimetry is the laboratory technique used to measure the heat released or absorbed during a chemical or physical change. capillary action Capillary action is the spontaneous rising of a liquid through a narrow tube against the force of gravity. catalyst A catalyst is a substance that speeds up the reaction rate and is (at least theoretically) recoverable at the end of the reaction in an unchanged form. cathode The cathode is the electrode in an electrochemical cell at which reduction takes place. cathode compartment The cathode compartment is the electrolyte solution in which the cathode is immersed. cations Cations are positively charged ions. cell notation Cell notation is a shorthand notation for representing a galvanic cell. Charles’s law Charles’s law states that there is a direct relationship between the volume and temperature of a gas, if the pressure and amount are kept constant. chemical equilibrium A chemical equilibrium has been reached when two exactly opposite reactions are occurring at the same place, at the same time, and with the same rates of reaction. colligative properties Colligative properties are solution properties that are simply dependent upon the number of solute particles, and not the type of solute. colloids Colloids are homogeneous mixtures in which solute diameters fall in between solutions and suspensions. combined gas equation The combined gas equation relates the pressure, temperature, and volume of a gas, assuming the amount is held constant.

reactions in which two or more reactants (elements or compounds) combine to form one product. combustion reactions Combustion reactions are redox reactions in which the chemical species rapidly combines with oxygen and usually emits heat and light. common-ion effect The common-ion effect is ^ an application of Le Chatelier’s principle to equilibrium systems of slightly soluble salts. complex A complex is composed of a central atom, normally a metal, surrounded by atoms or groups of atoms called ligands. compounds Compounds are pure substances that have a fixed proportion of elements. concentrated Concentrated is a qualitative way of describing a solution that has a relatively large amount of solute in comparison to the solvent. concentration Concentration is a measure of the amount of solute dissolved in the solvent. concentration cell A concentration cell is an electrochemical cell in which the same chemical species are used in both cell compartments, but differ in concentration. conjugate acid–base pair This is an acid–base pair + that differs by only a single H . continuous spectrum A continuous spectrum is a spectrum of light much like the rainbow. coordinate covalent bonds Coordinate covalent bonds are covalent bonds in which one of the atoms furnishes both of the electrons for the bond. coordination compounds Coordination compounds are a type of complex in which a metal atom is surrounded by ligands. coordination number Coordination number is the number of ligands that can covalently bond to the metal ion in the complex ion. covalent bonding In covalent bonding, one or more electron pairs are shared between two atoms. crisscross rule The crisscross rule can be used to help determine the formula of an ionic compound. critical point The critical point of a substance is the point on the phase diagram beyond which the gas and liquid phases are indistinguishable from each other. crystal lattice The crystal lattice is a three-dimensional structure that crystalline solids occupy.

360 U Glossary crystalline solids Crystalline solids display a very

electrolyte An electrolyte is a substance which,

regular ordering of the particles (atoms, molecules, or ions) in a three-dimensional structure called the crystal lattice. Dalton’s law Dalton’s law states that in a mixture of gases (A + B + C . . .) the total pressure is simply the sum of the partial pressures (the pressures associated with each individual gas). decomposition reactions Decomposition reactions are reactions in which a compound breaks down into two or more simpler substances. diamagnetism Diamagnetism is the repulsion of a molecule from a magnetic field due to the presence of all electrons in pairs. dilute Dilute is a qualitative term that refers to a solution that has a relatively small amount of solute in comparison to the amount of solvent. dimensional analysis Dimensional analysis, sometimes called the factor label method, is a method for generating a correct setup for a mathematical problem. dipole–dipole intermolecular force Dipole– dipole intermolecular forces occur between polar molecules.

when dissolved in solution or melted, conducts an electrical current. electrolytic cells Electrolytic cells use electricity from an external source to produce a desired redox reaction. electromagnetic spectrum The electromagnetic spectrum is radiant energy, composed of gamma rays, X-rays, ultraviolet, visible, etc. electron affinity The electron affinity is the energy change that results from adding an electron to an atom or ion. electron capture Electron capture is a radioactive decay mode that involves the capturing of an electron from the energy level closest to the nucleus (1s) by a proton in the nucleus. electronegativity The electronegativity (EN) is a measure of the attractive force that an atom exerts on a bonding pair of electrons. electron cloud (density) The electron cloud or density is a volume of space in which the probability of finding the electron is high. electronic configuration The electronic configuration is a condensed way of representing the pattern of electrons in an atom. elementary step Elementary steps are the individual reactions in the reaction mechanism or pathway. empirical formula The empirical formula is a chemical formula that tells us which elements are present in the compound and the simplest whole-number ratio of elements. endothermic Endothermic reactions absorb energy from their surroundings. endpoint The endpoint of a titration is the point signaled by the indication that an equivalent amount of base has been added to the acid sample, or vice versa. enthalpy The enthalpy change, ΔH, is the heat gained or lost by the system during constant pressure conditions. excited state An excited state of an atom is an energy state of higher energy. entropy Entropy (S ) is a measure of the disorder of a system. equilibrium constant The quantity calculated when the equilibrium concentrations of the chemical species are substituted into the reaction quotient. equivalence point The equivalence point is that + point in the titration where the moles of H in the acid solution have been exactly neutralized with − the same number of moles of OH .

double displacement (replacement) or metathesis reaction A double displacement (replacement) or

metathesis reaction is a chemical reaction where at least one insoluble product is formed from the mixing of two solutions. effective nuclear charge The overall attraction that an electron experiences is called the effective nuclear charge. This is less than the actual nuclear charge, because other electrons interfere with the attraction of the protons for the electron being considered. electrochemistry Electrochemistry is the study of chemical reactions that produce electricity and chemical reactions that take place because electricity is supplied. electrochemical cells Electrochemical cells use indirect electron transfer to produce electricity by a redox reaction, or they use electricity to produce a desired redox reaction. electrode The electrode is that solid part of the electrochemical cell that conducts the electrons that are involved in the redox reaction. electrode compartment The solutions in which the electrodes are immersed are called the electrode compartments. electrolysis Electrolysis is a reaction in which electricity is used to decompose a compound.

Glossary Í 361 exothermic An exothermic reaction releases energy

(heat) to its surroundings. face-centered unit cell The face-centered unit cell

has particles at the corners and one in the center of each face of the cube, but not in the center of the cube. First Law of Thermodynamics The First Law of Thermodynamics states that the total energy of the universe is constant. formation constant The formation constant is the equilibrium constant for the formation of a complex ion from a metal ion and ligands. frequency The frequency, ν, is defined as the number of waves that pass a point per second. functional group Functional groups are reactive groups on a compound that react in a characteristic way no matter what the rest of the molecule consists of. galvanic (voltaic) cells Galvanic (voltaic) cells are electrochemical cells that produce electricity by a redox reaction. gamma emission Gamma emission is a radioactive decay process in which high-energy, shortwavelength photons that are similar to X-rays are given off. gas A gas is a state of matter that has neither definite shape nor volume. Gay-Lussac’s law Gay-Lussac’s law describes the direct relationship between the pressure of a gas and its Kelvin temperature, if the volume and amount are held constant. Gibbs free energy The Gibbs free energy (G ) is a thermodynamic function that combines the enthalpy, entropy, and temperature. ΔG is the best indicator of whether or not a reaction will be spontaneous. Graham’s law Graham’s law says that the speed of gas diffusion (mixing of gases due to their kineticenergy) or effusion (movement of a gas through a tiny opening) is inversely proportional to the square root of the gases’ molecular mass. ground state The ground state of an atom is the lowest energy state that the electron can occupy. groups Groups (families) are the vertical columns on the periodic table. half-life The half-life, t1/2, is the amount of time that it takes for a reactant concentration to decrease to one-half its initial concentration. halogens Halogens are in Group 17 on the periodic table.

heat capacity Heat capacity is the quantity of heat

needed to change the temperature by 1 K. heat of vaporization The heat of vaporization is the

heat needed to transform a liquid into a gas. Henderson–Hasselbalch equation The Henderson–

Hasselbalch equation can be used to calculate the pH of a buffer. Henry’s law The solubility of a gas will increase with increasing partial pressure of the gas. Hess’s law Hess’s law states that if a reaction occurs in a series of steps, then the enthalpy change for the overall reaction is simply the sum of the enthalpy changes of the individual steps. heterogeneous catalyst A heterogeneous catalyst is a catalyst that is in a different phase or state of matter from the reactants. homogeneous catalyst A homogeneous catalyst is a catalyst that is in the same phase or state of matter as the reactants. Hund’s rule Hund’s rule states that electrons are added to the orbitals, half filling them all before any pairing occurs. hybrid orbitals Hybrid orbitals are atomic orbitals formed as a result of the mixing of the atomic orbitals of the atoms involved in a covalent bond. hydrocarbons Hydrocarbons are organic compounds containing only carbon and hydrogen. hydrogen bonding Hydrogen bonding is a specific type of dipole–dipole attraction in which a hydrogen atom is polar-covalently bonded to one of the following extremely electronegative elements: O, N, or F. ideal gas An ideal gas is a gas that obeys the five postulates of the Kinetic Molecular Theory of Gases. ideal gas equation The ideal gas equation relates the temperature, volume, pressure, and amount of a gas, and has the mathematical form of PV = nRT. indicators Indicators are substances that change their color during a titration to indicate the end point. inert (inactive) electrode An inert (inactive) electrode is a solid conducting electrode in an electrochemical cell that does not take part in the redox reaction. inner transition elements The inner transition elements are the two horizontal groups that have been pulled out of the main body of the periodic table. integrated rate law The integrated rate law relates the change in the concentration of reactants or products over time.

362 U Glossary intermediates Intermediates are chemical species

^telier’s principle ^telier’s principle Le Cha Le Cha

that are produced and consumed during the reaction, but that do not appear in the overall reaction. intermolecular forces Intermolecular forces are attractive or repulsive forces between molecules caused by partial charges. ion–dipole intermolecular force Ion–dipole intermolecular forces are attractive forces that occur between ions and polar molecules. ion-induced dipole intermolecular forces Ioninduced dipole intermolecular forces are attractive forces that occur between an ion and a nonpolar molecule. ion-product The ion-product has the same form as the solubility product constant, but represents a system that is not at equilibrium. ionic bond Ionic bonds result from some metal losing electrons to form cations and some nonmetal gaining those electrons to form an anion. ionic equation The ionic equation shows the soluble reactants and products in the form of ions. ionic solids Ionic solids have their lattices composed of ions held together by the attraction of opposite charges of the ions. ionization energy The ionization energy (IE) is the energy needed to completely remove an electron from an atom in the vapor state. isoelectronic Isoelectronic means having the same electronic configuration. isomers Isomers are compounds that have the same molecular formulas but different structural formulas. isotopes Isotopes are atoms of the same element (same number of protons) that have differing numbers of neutrons. joule (J) The joule is the SI unit of energy. kinetic energy Kinetic energy is energy of motion. Kinetic Molecular Theory The Kinetic Molecular Theory attempts to represent the properties of gases by modeling the gas particles themselves at the microscopic level. kinetics Kinetics is the study of the speed of reactions. Law of Conservation of Matter The Law of Conservation of Matter says that, in ordinary chemical reactions, matter is neither created nor destroyed. Lewis electron-dot structure The Lewis electrondot structure is a structural formula that represents the element and its valence electrons.

states that if a chemical system at equilibrium is stressed (disturbed), it will reestablish equilibrium by shifting of the reactions involved. limiting reactant The limiting reactant is the reactant that is used up first in a chemical reaction. line spectrum A line spectrum is a series of fine lines of colors representing wavelengths of photons that are characteristic of a particular element. liquid A liquid is a state of matter that has a definite volume but no definite shape. macromolecules Macromolecules are extremely large molecules. magnetic quantum number (m l ) The magnetic quantum number describes the orientation of the orbital around the nucleus. main-group elements Main-group elements are the groups on the periodic table that are labeled 1–2 and 13–18. manometer A manometer is an instrument used to measure the gas pressure inside a container. mass number The mass number is the sum of the protons and neutrons in an atom. mass percent The mass percentage of a solution is the mass of the solute divided by the mass of the solution and then multiplied by 100% to get percentage. mass-volume percent The mass/volume percent of a solution is the mass of the solute divided by the volume of the solution and then multiplied by 100% to yield percentage. mechanism The mechanism is the sequence of steps that a reaction undergoes in going from reactants to products. melting point The temperature at which a solid converts into the liquid state is called the melting point (m.p.) of the solid. metallic bonding In metallic bonding the electrons of the atoms are delocalized and are free to move throughout the entire solid. metallic solids Metallic solids have metal atoms occupying the crystal lattice and held together by metallic bonding. metalloids Metalloids are a group of elements that have properties of both metals and non-metals. metals Metals are normally solids (mercury being an exception), shiny, and good conductors of heat and electricity. They can be hammered into thin sheets (malleable) and extruded into wires (ductile). Chemically, metals tend to lose electrons in reactions.

Glossary Í 363 metathesis reaction In a metathesis reaction two

substances exchange bonding partners. molality (m) Molality is defined as the moles of

solute per kilogram of solvent. molar heat capacity The molar heat capacity (C ) is

the amount of heat needed to change the temperature of 1 mole of a substance by 1 K. molarity (M ) Molarity is a concentration term that represents the moles of solute per liters of solution. molar mass The mass in grams of one mole of a substance. mole The mole (mol) is defined as the amount of a substance that contains the same number of particles as atoms in exactly 12 g of carbon-12. molecular equation The molecular equation is an equation in which both the reactants and products are shown in the undissociated form. molecular formula The molecular (actual) formula shows which elements are in the compound and the actual number of atoms of each element. molecular orbital theory The molecular orbital (MO) theory of covalent bonding proposes that atomic orbitals combine to form molecular orbitals that encompass the entire molecule. molecular solids Molecular solids have their lattices composed of molecules held in place by London forces, dipole–dipole forces, and hydrogen bonding. molecule A molecule is a covalently bonded compound. monomers Macromolecules are composed of repeating units, called monomers. Nernst equation The Nernst equation allows the calculation of the cell potential of a galvanic cell that is not at standard conditions. net ionic equation The net ionic equation is written by dropping out the spectator ions and showing only those chemical species that are involved in the chemical reaction. network covalent solids Network covalent solids have covalent bonds joining the atoms together in an extremely large crystal lattice. neutral Neutral is 7.00 on the pH scale. neutralization reactions Neutralization reactions are acid–base reactions in which an acid reacts with a base to give a salt and usually water. noble gases Noble gases are in Group 18 on the periodic table. They are very unreactive owing to their filled valence shell.

nonelectrolytes Nonelectrolytes are substances that

do not conduct electricity when dissolved in water or melted. nonmetals Nonmetals have properties that are generally the opposite of metals. Some are gases, are poor conductors of heat and electricity, are neither malleable nor ductile, and tend to gain or share electrons in their chemical reactions. nonpolar covalent bond In a nonpolar covalent bond the electrons are shared equally by the two atoms involved in the bond. nuclear belt of stability The nuclear belt of stability is a plot of the # neutrons versus the # protons for the known stable isotopes. nucleus The nucleus is a dense core of positive charge at the center of the atom that contains most of the mass of the atom. octet rule The octet rule states that during chemical reactions, atoms lose, gain, or share electrons in order to achieve a filled valence shell, to complete their octet. orbital An orbital or wave function is a quantum mechanical mathematical description of the location of electrons. The electrons in a particular subshell are distributed among these volumes of space of equal energies. order of reaction The order of reaction is the exponent in the rate equation that indicates what effect a change in concentration of that particular reactant species will have on the reaction rate. organic chemistry Organic chemistry is the study of the chemistry of carbon. osmosis Osmosis is the passing of solvent molecules through a semipermeable membrane. osmotic pressure The osmotic pressure is the amount of pressure that must be exerted on a solution in order to prevent osmosis of solvent molecules through a semipermeable membrane. oxidation Oxidation is the loss of electrons. oxidation numbers Oxidation numbers are bookkeeping numbers that allow chemists to do things like balance redox equations. oxidizing agent The oxidizing agent is the reactant being reduced. paramagnetism Paramagnetism is the attraction of a molecule to a magnetic field and is due to unpaired electrons. pascal The pascal is the SI unit of pressure.

364 U Glossary percent yield The percent yield (% yield) is the

rate equation The rate equation relates the speed of

actual yield divided by the theoretical yield, with the resultant multiplied by 100. periods Periods are the horizontal rows on the periodic table that have consecutive atomic numbers. phase changes Phase changes are changes of state. phase diagram A phase diagram is a graph representing the relationship of the states of matter of a substance to temperature and pressure. pi (π) bonds Pi bonds result from the overlap of atomic orbitals on both sides of a line connecting two atomic nuclei. polar covalent bonds Polar covalent bonds are covalent bonds in which there is an unequal sharing of the bonding pair of electrons. polyprotic acids Polyprotic acids are acids that can donate more than one proton. potential energy Potential energy is stored energy. positron A positron is essentially an electron that has a positive charge instead of a negative one. precipitate A precipitate is an insoluble product that forms in a solution; the formation of a solid from ions in solution. precipitation reactions Precipitation reactions are reactions that involve the formation of an insoluble compound, a precipitate, from the mixing of two soluble compounds. pressure Pressure is the force exerted per unit of surface area. principal quantum number (n) The principal quantum number describes the size of the orbital and relative distance from the nucleus. proof The proof of an aqueous ethyl alcohol solution is twice the volume percent. quantized Quantized means that there could be only certain distinct energies associated with a state of the atom. quantum numbers Quantum numbers are used to describe each electron within an atom corresponding to the orbital size, shape, and orientation in space. radioactivity Radioactivity is the spontaneous decay of an unstable isotope to a more stable one. rate constant (k ) The rate constant is a proportionality constant that appears in the rate law and relates the concentration of reactants to the speed of reaction. rate-determining step The rate-determining step is the slowest one of the reaction steps and controls the rate of the overall reaction.

reaction to the concentration of reactants and has m n the form: Rate = k[A] [B] . . . . where k is the rate constant and m and n are the orders of reaction with respect to that specific reactant. reactants The starting materials in a chemical reaction, which get converted into different substances called products. reaction intermediate A reaction intermediate is a substance that is formed but then consumed during the reaction mechanism. reaction mechanism The reaction mechanism is the sequence of individual reactions that occur in an overall reaction in going from reactants to products. reaction quotient The reaction quotient, Q, is the numerical value that results when non-equilibrium concentrations are inserted into the equilibrium expression. When the system reaches equilibrium, the reaction quotient becomes the equilibrium constant. reactive site The reactive site of a molecule is the place at which the reaction takes place. redox reactions Redox reactions are chemical reactions in which electrons are lost and gained. reducing agent The reactant undergoing oxidation in a redox reaction is called the reducing agent. reduction Reduction is the gain of electrons in a redox reaction. resonance Resonance is a way of describing a molecular structure that cannot be represented by a single Lewis structure. Several different Lewis structures are used, each differing only by the position of electron pairs. reverse osmosis Reverse osmosis takes place when the pressure on the solution side exceeds the osmotic pressure and solvent molecules are forced back through the semipermeable membrane into the solvent side. root mean square speed The average velocity of the gas particles is called the root mean square speed. salt bridge A salt bridge is often an inverted U-tube that contains a gel containing a concentrated electrolyte solution, used in an electrochemical cell to maintain electrical neutrality in the cell compartments. saturated hydrocarbons Saturated hydrocarbons are hydrocarbons that are single bonded to the maximum number of other atoms.

Glossary Í 365 saturated solution A solution in which one has

speed of light (c) The speed of light is the speed at

dissolved the maximum amount of solute per given amount of solvent at a given temperature is called a saturated solution. Second Law of Thermodynamics The Second Law of Thermodynamics states that all processes that occur spontaneously move in the direction of an increase in entropy of the universe (system + surroundings). semipermeable membrane A semipermeable membrane is a thin porous film that allows the passage of solvent molecules but not solute particles. shells The electrons in an atom are located in various energy levels or shells that are located at different distances from the nucleus. SI system The system of units used in science is the SI system (Système International), which is related to the metric system. Sigma (σ) bonds Sigma bonds have the orbital overlap on a line drawn between the two nuclei. simple cubic unit cell The simple cubic unit cell has particles located at the corners of a simple cube.

which all electromagnetic radiation travels in 8 a vacuum, 3.0 × 10 m/s. spin quantum number (ms) The spin quantum number indicates the direction the electron is spinning. standard cell potential (E°) The standard cell potential is the potential (voltage) associated with an electrochemical cell at standard conditions. standard enthalpy of formation The standard enthalpy of formation of a compound (ΔHf°) is the change in enthalpy when 1 mol of the compound is formed from its elements and when all substances are in their standard states. standard molar entropies (S °) Standard molar enthalpies of elements and compounds are the entropies associated with 1 mole of a substance in its standard state. standard reduction potentials The standard reduction potential is the voltage associated with a halfreaction shown in the form of reduction. state function A state function is a function that doesn’t depend on the pathway, only the initial and final states. stoichiometry Stoichiometry is the calculation of the amount (mass, moles, particles) of one substance in the chemical reaction through the use of another. strong acid A strong acid is an acid that ionizes completely in solution. strong base A strong base is a base that ionizes completely in solution. strong electrolytes Strong electrolytes completely ionize or dissociate in solution. structural isomers Structural isomers are compounds that have the same molecular formula but differ in how the atoms are attached to each other. sublimation Sublimation is going directly from the solid state to the gaseous state without ever having become a liquid. subshells Within the shells, the electrons are grouped in subshells of slightly different energies. supersaturated solution A supersaturated solution has more than the maximum amount of solute dissolved in the solvent at a given temperature. surface tension Surface tension is the amount of force that is required to break through the molecular layer at the surface of a liquid.

single displacement (replacement)

reactions

Single displacement reactions are reactions in which atoms of an element replace the atoms of another element in a compound. solid A solid is a state of matter that has both a definite shape and a definite volume. solubility product constant (Ksp) The solubility product constant is the equilibrium constant associated with sparingly soluble salts and is the product of the ionic concentrations, each one raised to the power of the coefficient in the balanced chemical equation. solute The solute is the component of the solution that is there in smallest amount. solution A solution is defined as a homogeneous mixture composed of solvent and one or more solutes. solvation Solvation is the forming of a layer of bound solvent molecules around a solute. solvent The solvent is that component of a solution that is present in largest amount. specific heat capacity (or specific heat) (c ) The specific heat capacity is the quantity of heat needed to raise the temperature of 1 g of the substance by 1 K. spectator ions Spectator ions are ions that are not actually involved in the chemical reaction taking place, but simply maintain electrical neutrality.

366 U Glossary suspension A heterogeneous mixture in which the

particles are large (in excess of 1000 nm). surroundings The surroundings is a thermodynamic

term meaning the part of the universe that is not the system that is being studied. system The system is a thermodynamics term meaning the part of the universe that we are studying. ternary compounds Ternary compounds are those containing three (or more) elements. thermochemistry Thermochemistry is the part of thermodynamics dealing with the changes in heat that take place during chemical processes, for example ΔHfusion. thermodynamics Thermodynamics is the study of energy and its transformations. theoretical yield The theoretical yield is the maximum amount of product that can be formed. titrant The titrant is that solution in a titration that has a known concentration. titration A titration is a laboratory procedure in which a solution of known concentration is used to determine the concentration of an unknown solution. transition elements Groups 3–12 on the periodic table are called the transition elements. transmutation Transmutation is a nuclear reaction that results in the creation of one element from another one. triple point The triple point of a substance is the combination of temperature and pressure on a phase diagram at which all three states of matter can exist in equilibrium. Tyndall effect The Tyndall effect is exhibited when a light is shone through a colloid and is visible, owing to the reflection of the light off the larger colloid particles. unimolecular reactions Unimolecular reactions are reactions in which a single chemical species decomposes or rearranges. unit cells Unit cells are the repeating units in a crystal lattice. unsaturated Unsaturated organic compounds have carbons that do not have the maximum number of bonds to other atoms; there is at least one carbon-to-carbon double or triple bond present.

unsaturated solution An unsaturated solution has

less than the maximum amount of solute dissolved in a given amount of solvent. valence bond theory The valence bond theory describes covalent bonding as the overlap of atomic orbitals to form a new kind of orbital, a hybrid orbital. valence electrons Valence electrons are the electrons in the outermost energy level (outermost shell). Valence electrons are normally considered to be only the s and p electrons in the outermost energy level. van der Waals equation van der Waals equation is an equation that is a modification of the ideal gas equation to compensate for the behavior of real gases. van’t Hoff factor (i ) The van’t Hoff factor is the ratio of moles of solute particles formed to moles of solute dissolved in solution. vapor pressure The pressure exerted by the gaseous molecules that are at equilibrium with a liquid in a closed container. viscosity Viscosity is the resistance to flow of a liquid. volume percent The volume percent of the solution is the volume of the solute divided by the volume of the solution and then multiplied by 100% to generate the percentage. VSEPR theory The VSEPR (valence shell electronpair repulsion) theory says that the electron pairs around a central atom will try to get as far as possible from each other in order to minimize the repulsive forces. This theory is used to predict molecular geometry. water dissociation constant (Kw) The water dissociation constant is the equilibrium constant associated with the ionization of pure water. wave function The wave function is a mathematical description of the electron’s motion. wavelength (λ ) Wavelength is the distance between two identical points on a wave. weak acid A weak acid is an acid that only partially ionizes in solution. weak base A weak base is a base that only partially ionizes in solution. weak electrolytes Weak electrolytes only partially ionize or dissociate in solution.

EXAM RESOURCES Keywords and Equations: For use with Free-Response Questions only. Basics

T = temperature V = volume KE = kinetic energy

n = moles D = density t = time

m = mass v = velocity

P = pressure M = molar mass

−23 −1 Boltzmann’s constant, k = 1.38 × 10 J K −19 electron charge = −1.602 × 10 coulombs −1 1 electron volt per atom = 96.5 kJ mol 23 −1 Avogadro’s number = 6.022×10 mol K = °C + 273 D = m/V

Gases

urms = root mean square speed r = rate of effusion STP = 0.000° C and 1.000 atm PV = nRT 2 2 (P + n a/V )(V − nb) = nRT PA = Ptotal × XA, where XA = moles A/total moles Ptotal = PA + PB + PC + . . . P1V1/T1 = P2V2/T2 u rms = 3kT /m = 3RT /M KE per molecule = KE per mol =

3

2

1

2

mv 2

RT

r1 /r2 = M 2 /M 1 1 atm = 760 mm Hg = 760 torr Gas constant, R = 8.31 J mol−1 k−1 = 0.0821 L atm mol−1 K−1 = 8.31 volt coulomb mol−1 K−1 Thermodynamics

S ° = standard entropy G ° = standard free energy c = specific heat capacity

H ° = standard enthalpy q = heat Cp = molar heat capacity at constant pressure

ΔS° = Σ S° products − Σ S° reactants ΔH ° = Σ ΔHf° products − Σ ΔHf° reactants ΔG° = Σ ΔGf° products − Σ ΔGf° reactants Í 367

368 U Exam Resources ΔG ° = ΔH ° − TΔS ° = −RT in K = −2.303 RT log K = −nFE ° ΔG = ΔG° + RT ln Q = ΔG ° + 2.303 RT log Q q = mc ΔT Cp = ΔH/ΔT Light and Electrons

E = energy p = momentum m = mass

ν = frequency v = velocity E = hν

l = wavelength n = principal quantum number c = lν l = h/mv p = mv

−18 2 En = (−2.178 × l0 /n )J 8 −1 Speed of light, c = 3.0 × 10 ms Planck’s constant, h = 6.63 × 10−34 Js

Solutions

π = osmotic pressure i = van’t Hoff factor Kf = molal freezing-point depression constant Kb = molal boiling-point elevation constant −1 Kf for water = 1.86 K kg mol Kb for water = 0.512 K kg mol−1 ΔTf = iKf × molality ΔTb = iKb × molality π = MRT Molarity, M = moles solute per liter solution Molality, m = moles solute per kilogram solvent Kinetics

ln[A ]t − ln[A ]o = −kt 1 1 − = kt [ A ]t [ A ]o −E a ⎛ 1 ⎞ ⎜ ⎟ + ln A R ⎝T ⎠ Ea = activation energy k = rate constant A = frequency factor ln k =

Electrochemistry

I = current (amperes) q = charge (coulombs) E ° = standard reduction potential K = equilibrium constant Faraday’s constant, F = 96,500 coulombs per mole of electrons nE ° 0 .0592 ⎛ 0 .0592 ⎞ ⎛ RT ⎞ ° ° E cell = E cell −⎜ ⎟ logQ at 25°C ⎟ ln Q = E cell − ⎜ ⎝ n ⎠ ⎝ nF ⎠ I = q /t log k =

Exam Resources Í 369 Equilibrium

Q = reaction quotient [C]c [D]d , where aA + bB cC + dD [A]a [B]d equilibrium constants: Ka (weak acid) Kb (weak base) Kw (water) Kc (molar concentrations) Kp (gas pressure) Q =

Ka =

[H+ ][ A − ] [OH− ][HB+ ] Kb= [HA] [B] −

+

−14

Kw = [OH ][H ] = 1.0 × 10 = Ka × Kb at 25°C + − pH = −log [H ], pOH = −log [OH ] 14 = pH + pOH pH=p K a + log

[A− ] [HA]

[HB+ ] [B] pKa = −log Ka, pKb = −log Kb Kp = Kc(RT )Δn, where Δn = moles product gas − moles reactant gas pOH =p K b + log

Experimental

Beer’s Law: A = abc (A = absorbance; a = molar absorbtivity; b = path length; c = concentration)

1.0080

4.00260

3

4

5

6

7

8

9

10

Li

Be

B

C

N

O

F

Ne

6.941

9.01218

10.81

12.011

14.0067

15.9994

18.9984

20.179

11

12

13

14

15

16

17

18

Na

Mg

Al

Si

P

S

Cl

Ar

26.9815

28.086

30.9738

32.06

35.453

39.948

22.9898

24.305

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

K

Ca

Sc

Ti

V

Cr

Mn

Fe

Co

Ni

Cu

Zn

Ga

Ge

As

Se

Br

Kr

39.102

40.08

44.9559

47.90

50.9414

51.996

54.9380

55.847

58.9332

63.546

65.37

69.72

72.59

74.9216

78.96

79.904

83.80

58.71

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

Rb

Sr

Y

Zr

Nb

Mo

Tc

Ru

Rh

Pd

Ag

Cd

In

Sn

Sb

Te

I

Xe

85.4678

87.62

88.9059

91.22

92.9064

95.94

98.9062

101.07

102.9055

106.4

107.868

112.40

114.82

118.69

121.75

127.60

126.9045

131.30

55

56

57

72

73

74

75

76

77

78

79

80

81

82

83

84

85

86

Cs

Ba

La

Hf

Ta

W

Re

Os

Ir

Pt

Au

Hg

Tl

Pb

Bi

Po

At

Rn

132.9055

137.34

178.49

180.9479

183.85

186.2

190.2

195.09

196.9665

200.59

204.37

207.2

208.9806

(210)

(210)

(222)

*

138.9055

87

88

89

105

106

Fr

Ra

Ac

† Unq

104

Unp

Unh

(223)

226.0254

(227)

(261)

(262)

(263)

*

†

192.22

58

59

60

61

62

63

64

65

66

67

68

69

70

71

Ce

Pr

Nd

Pm

Sm

Eu

Gd

Tb

Dy

Ho

Er

Tm

Yb

Lu

140.12

140.9077

144.24

(145)

150.4

151.96

157.25

158.9254

162.50

164.9303

167.26

168.9342

173.04

174.97

90

91

92

93

94

95

96

97

98

99

100

101

102

103

Th

Pa

U

Np

Pu

Am

Cm

Bk

Cf

Es

Fm

Md

No

Lr

(242)

(243)

(247)

(249)

(251)

(254)

(253)

(256)

(254)

(257)

232.0381 231.0359 238.029 237.0482

370 U Exam Resources

2

He

May be used with all questions.

1

H

Periodic Table of the Elements

Periods

Exam Resources Í 371

For use with Free-Response Questions only. Standard Reduction Potentials in Aqueous Solution at 25°C Half-reaction + − Li + e + − Cs + e + − K +e + − Rb + e 2+ − Ba + 2 e 2+ − Sr + 2 e 2+ − Ca + 2 e + − Na + e 2+ − Mg + 2 e 2+ − Be + 2 e 3+ − Al + 3 e 2+ − Mn + 2 e 2+ − Zn + 2 e 3+ − Cr + 3 e 2+ − Fe + 2 e 3+ − Cr + e 2+ − Cd + 2 e + − Tl + e 2+ − Co + 2 e 2+ − Ni + 2 e 2+ − Sn + 2 e 2+ − Pb + 2 e + − 2H +2e + − S(s) + 2 H + 2 e 4+ − Sn + 2e 2+ − Cu + e 2+ − Cu + 2 e + − Cu + e − I2(s) + 2 e 3+ − Fe + e − 2+ Hg2 +2 e + − Ag + e 2+ − Mg + 2 e 2+ − 2 Hg + 2e − Br2(l) + 2 e + − O2(g) + 4 H + 4 e − Cl2(g) + 2e 3+ − Au + 3 e 3+ − Co + e − F2(g) + 2 e

E°(V) → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → →

Li(s) Cs(s) K(s) Rb(s) Ba(s) Sr(s) Ca(s) Na(s) Mg(s) Be(s) Al(s) Mn(s) Zn(s) Cr(s) Fe(s) 2+ Cr Ce(s) Tl(s) Co(s) Ni(s) Sn(s) Pb(s) H2(g) H2S(g) 2+ Sn + Cu Cu(s) Cu(s) 2 I− Fe2+ 2 Hg(l) Ag(s) Hg(l) Hg22+ 2 Br− 2 H2O(l) 2 Cl− Au(s) Co2+ − 2F

−3.05 −2.92 −2.92 −2.92 −2.90 −2.89 −2.87 −2.71 −2.37 −1.70 −1.66 −1.18 −0.76 −0.74 −0.44 −0.41 −0.40 −0.34 −0.28 −0.25 −0.14 −0.13 0.00 0.14 0.15 0.15 0.34 0.52 0.53 0.77 0.79 0.80 0.85 0.92 1.07 1.23 1.36 1.50 1.82 2.87

NOTES

5 Steps to a 5 AP Chemistry

Five steps to 5 AP Chemistry

5 Steps to a 5 AP World History

5 Steps to a 5 AP Statistics, 2010-2011 Edition

5 Steps to a 5 AP Psychology, 2008-2009 Edition

5 Steps to a 5: AP Physics B and C

5 Steps to a 5 AP Microeconomics and Macroeconomics

5 Steps to a 5 AP Statistics, 2008-2009 Edition

5 Steps to a 5. AP Physics B and C

5 Steps to a 5 AP Spanish Language, 2008-2009

5 Steps to a 5 AP English Language, Second Edition (5 Steps to a 5 on the Ap English Language Exam)